2016-05-10 lukax86: remove old references to kmod-acpi-button
2016-05-10 lukakernel: fix ip6_tunnel compilation
2016-05-10 lukabase-files: remove ununsed
2016-05-10 lukabase-files: Allow to disable failsafe mode
2016-05-10 lukaimage / basefiles: make console password configurable
2016-05-10 lukabase-files: fix error message during boot
2016-05-10 lukascripts: metadata: add CONFIG_TARGET_SUBTARGET symbol
2016-05-10 lukabusybox: fix setting the kernel timezone
2016-05-10 lukanetifd: Send DHCP release when client exits
2016-05-10 lukanetifd: fix default ip rules
2016-05-10 lukax86: search PARTUUID in any block device
2016-05-10 lukax86: make sysupgrade work without partx
2016-05-09 rmileckimtd: add -c option for specifying amount of data to...
2016-05-09 rmileckimtd: trx: use separated buffer for TRX header
2016-05-09 rmileckimtd: seama: exit with error if Seama header wasn't...
2016-05-09 rmileckimtd: seama: fix image data handling
2016-05-09 rmileckimtd: seama: move buf allocation to the MD5 function
2016-05-09 rmileckimtd: seama: update MD5 using header in the first block...
2016-05-09 rmileckimtd: seama: add md5 to header struct
2016-05-09 rmileckimtd: check for Seama magic early when fixing MD5
2016-05-09 rmileckimtd: add missing breaks in a switch
2016-05-09 rmileckimtd: use tabs for indents
2016-05-05 rmileckikernel: update kernel 4.1 to version 4.1.23
2016-05-04 jowopenssl: Update to version 1.0.2h
2016-05-02 blogicramips: Drop hacky switch workaround for failsafe on...
2016-05-02 blogicramips: Disable all ethernet ports except port 0 on...
2016-05-02 blogicramips: Disable all ethernet ports except port 4 on...
2016-05-02 blogicramips: Get rt3050 ethernet ports to be disabled from...
2016-05-02 blogicramips: Fix comment in rt3050 ethernet switch driver.
2016-05-02 blogicramips: Fix documentation for the rt3050 switch driver.
2016-05-02 blogicramips: Fix multicast ICMPv6 for the rt3050 ethernet...
2016-05-02 blogicar71xx: add TP-Link TL-WR810N support
2016-05-02 blogicubox: turn logd into a separate package
2016-05-02 blogiclantiq: VGV7510KW22BRN - set the phy clock source
2016-05-02 blogiclantiq: add device tree binding for the phy clock source
2016-05-02 blogiclantiq: VGV7510KW22BRN - support dual-image
2016-05-02 blogiclantiq: handle the dual-firmware layout of brnboot
2016-05-02 blogiclantiq: move partitions into partion table node
2016-05-02 blogiclantiq: use sysupgrade.bin postfix for tplink images
2016-05-02 blogiclantiq: VG3503J - use the same PHY led functionality...
2016-05-02 blogicar71xx: Fix eth0 support for Ubiquiti UniFi AP AC
2016-04-30 blogicbase-files: fix group/user settings after sysupgrade
2016-04-30 blogicbase-files: split user/group addition code into a function
2016-04-29 blogicppp: Add ppp-mod-passwordfd subpackage to ppp
2016-04-29 blogicdnsmasq: Add conntrack support in the full variant
2016-04-29 blogicdropbear: Add procd interface triggers when interface...
2016-04-29 blogiciproute2: Add package for nstat utility
2016-04-29 blogiclantiq: use the same functionality for all ethernet...
2016-04-29 blogiclantiq: fix minor typos in 11G/22F phy driver
2016-04-29 blogicramips: add support for Planex MZK-EX750NP.
2016-04-29 blogicscripts: avoid hard-coded paths in scripts
2016-04-29 blogicbase-files: evaluate uci-defaults on run-time installations
2016-04-29 blogicmediatek: sync patches and add more ethernet stability...
2016-04-27 rmileckibcm53xx: add m25p80 workaround for SPI flash writing...
2016-04-27 blogicmediatek: sync and patches add support for several...
2016-04-27 rmileckibcm53xx: support SPI-NOR on dual flash devices
2016-04-26 rmileckibcm53xx: switch to m25p80 and drop bcm53xxspiflash
2016-04-26 rmileckibcm53xx: support JEDEC incompatible w25q128 in spi-nor
2016-04-26 blogicar71xx: Add support for the OMYlink OMY-G1
2016-04-26 blogiczynq: Add Zybo device support
2016-04-26 blogicZynq: Add Zedboard device support
2016-04-26 blogiczynq: Remove rdinit patch
2016-04-26 blogiclantiq: use dwc2 by default on all ar9 boards
2016-04-26 blogiclantiq: install uboot-envtools by default on BTHOMEHUBV3A
2016-04-26 blogicdnsmasq: run as dedicated UID/GID
2016-04-26 blogicmac80211: ath9k: add GPIO support for AR9280 chip
2016-04-26 blogiclantiq: remove read-only flag on two partitions on...
2016-04-26 blogiccns3xxx: set both MPS 'and' MRSS to 128
2016-04-26 blogiccns3xxx: backport pci fix for cns3xxx_write_config
2016-04-26 blogicramips: Add support for the Netgear WNDR3700v5
2016-04-26 blogicusbutils: Update USB IDs list and drop gzip compression
2016-04-26 blogicar71xx: Add TP-Link TL-WR740N v6 support to trunk
2016-04-26 blogicar71xx: simplify patch 613 and add missing error handling
2016-04-26 blogicmediatek: update patches
2016-04-26 blogiclantiq: Fix typo in LED diag script.
2016-04-26 blogiclantiq: use new image build process for brnImages
2016-04-26 blogicinclude: add a no dict version of lzma to new image...
2016-04-26 blogiclantiq: remove orphaned tp-link image build steps
2016-04-26 blogiclantiq: build sysupgrade images for lantiqImage
2016-04-26 blogiclantiq: new image build process - fix kernel entry...
2016-04-26 blogiclantiq: uboot-envtools on BTHOMEHUBV3A
2016-04-26 blogicramips: add support for Planex MZK-EX300NP
2016-04-26 blogicramips: add support for Planex CS-QR10
2016-04-26 rmileckikernel: backport support for accelerated SPI flash...
2016-04-26 rmileckibcm53xx: backport BCM5301X DT patch specifying SPI...
2016-04-25 jowfstools: respect mount flags for /overlay mounts
2016-04-25 rmileckimac80211: add brcmfmac regression ("NULL pointer derefe...
2016-04-24 haukeramips: fix build of target
2016-04-24 lukaoxnas: add missing semicolon
2016-04-21 blogicxtables-addons: build: fix configure compatiblity with...
2016-04-21 blogicar71xx: build TP-LINK Archer C7 images with US region...
2016-04-21 blogicar71xx: fix giving extra arguments to Build/mktplinkfw
2016-04-21 blogictools: firmware-utils: add region code support to mktpl...
2016-04-21 blogictools: firmware-utils: clean up mktplinkfw
2016-04-21 blogicramips: Add support for ZBT WG3526
2016-04-21 blogicramips: awake rt305x USB controller
2016-04-21 blogicramips: add support for ELECOM WRH-300CR
2016-04-21 blogiclantiq: use new image build process for some images
2016-04-21 blogicramips: update DTS file for Planex DB-WRT01
2016-04-20 rmileckibcm53xx: bump maximum TRX size for devices with serial...