juhosg [Mon, 21 Mar 2016 13:15:13 +0000 (13:15 +0000)]
adm5120: lzma-loader: remove trailing whitespaces from head.S
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49057
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 21 Mar 2016 13:15:09 +0000 (13:15 +0000)]
generic: lzma-loader: fix cache invalidation
The current code only partially invalidates both caches
because the cache size and cache-line size values are
incorrectly passed to the C code.
Fix the assembly code to pass the arguments in the correct
order.
Tested on RB532.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49056
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 21 Mar 2016 13:15:05 +0000 (13:15 +0000)]
generic: lzma-loader: remove trailing whitespaces from start.S
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49055
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 20 Mar 2016 18:48:59 +0000 (18:48 +0000)]
odhcp6c : Silence mtu write error warnings
Silence warning "daemon.notice netifd: wan6 (1139): sh: write error: Invalid argument"
when an invalid MTU is received via RA as kernel refuses to accept IPv6 mtu values
which are smaller than 1280 and bigger than the device mtu.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49054
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 20 Mar 2016 14:41:58 +0000 (14:41 +0000)]
ar71xx: WNR1000v2: fix for random WLAN MAC
Fix for invalid/random WLAN MAC address in WNR1000v2. Permanent platform
MAC is calculated and assigned during system startup. WLAN MAC follows
wired Ethernet interface addresses. This is the same fix as for WNR2000v3
and WNR612v2.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49051
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 20 Mar 2016 14:41:54 +0000 (14:41 +0000)]
lantiq: use upstream mechanism to append device tree file
Instead of using our patch-dtb program just place the device tree
behind the kernel binary and then let the in kernel mechanism fetch it.
This also adds support for having the device tree file in the boot
loader.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49050
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 20 Mar 2016 14:41:49 +0000 (14:41 +0000)]
wireless: remove rtl8188eu (staging)
- depends on CFG80211 (upstream:
9da4aa48d04bbdbae3c959809e14da2bf0c53f61)
in os_dep/mon.c
This removes rtl8188eu completely from OpenWrt
since mac80211/compat-wireless/backports does not
provide staging wireless drivers
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49049
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 20 Mar 2016 14:41:44 +0000 (14:41 +0000)]
wireless: add vendor dirs
Kernel 4.5 changes wireless driver organisation
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49048
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 20 Mar 2016 14:41:41 +0000 (14:41 +0000)]
mac80211: add cisco airo
airo depends on cfg80211, move it to mac80211
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49047
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 20 Mar 2016 14:41:37 +0000 (14:41 +0000)]
wireless: remove cisco airo
it depends on cfg80211
cfg80211 & wext drivers don't mix on OpenWrt
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49046
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 20 Mar 2016 14:41:33 +0000 (14:41 +0000)]
ramips: MiWifi-Nano - change gpios to leds, add to default build group
1) Use leds to indicate:
Red - Power
Amber - Radio On
Blue - Wifi associated
2) Add profile to default build group for MT7628 subtarget
Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49045
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 20 Mar 2016 14:41:29 +0000 (14:41 +0000)]
oxnas: sync cpu-hotplug with mach-realview
Make mach-oxnas/hotplug.c look more similar to mach-realview/hotplug.c,
just cosmetics and maintainability concerns, no functional changes.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49044
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 20 Mar 2016 14:41:25 +0000 (14:41 +0000)]
oxnas: add spinlock in pinctrl driver
Try to address a race-condition in pinctrl-oxnas.c
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49043
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 20 Mar 2016 14:41:21 +0000 (14:41 +0000)]
oxnas: also reset GPIO B registers on boot
Clear both, SYS_CTRL_*_SEL and SEC_CTRL_*_SEL on boot instead of
writing to SYS_CTRL_*_SEL twice which looks like a copy-paste error.
Thanks to anonymous to bring this up in #21892!
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49042
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 20 Mar 2016 14:41:17 +0000 (14:41 +0000)]
oxnas: switch to new image generation template
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49041
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 20 Mar 2016 14:41:13 +0000 (14:41 +0000)]
oxnas: add Default profile and reorganize device profiles
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49040
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 20 Mar 2016 14:41:06 +0000 (14:41 +0000)]
include/image.mk: allow including U-Boot environment in UBI
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49039
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sat, 19 Mar 2016 11:00:09 +0000 (11:00 +0000)]
linux-firmware: fix rt73-usb-firmware package
Some parts of this package were named rt73-pci-firmware before which
looks like a copy and past error. This renames all parts to rt73-usb-
firmware and then the firmware gets build and the dependencies from the
package with the kernel module are also working correctly.
This fixes #22069
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49037
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Fri, 18 Mar 2016 23:41:21 +0000 (23:41 +0000)]
kernel: update kernel 4.1 to version 4.1.20
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49035
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 17 Mar 2016 23:09:20 +0000 (23:09 +0000)]
mac80211: libertas-spi: deactivate for UML target
The UML target does not have spi support.
This fixes a build problem found by the build bot.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49034
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 17 Mar 2016 22:36:27 +0000 (22:36 +0000)]
kernel: add missing kernel options
This was found by the build bot.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49033
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 17 Mar 2016 21:41:07 +0000 (21:41 +0000)]
kernel: update kernel 4.4 to version 4.4.6
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49032
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 16 Mar 2016 09:27:14 +0000 (09:27 +0000)]
ar71xx: Use PHY fixups for Open Mesh MR1750
The delays of PHY/MAC on the MR1750 are done by u-boot and OpenWrt in
different ways. u-boot only modifies the ETH_CFG of the QCA955x based on
the link speed. But OpenWrt can only modify the PHY delays based on the
link speed.
This can lead to communication problems when u-boot initializes the ETH_CFG
for a specific link speed (e.g. 10BASE-T) but then OpenWrt the sets the PHY
delays to an incompatible value.
Instead reset the ETH_CFG delay bits of the QCA955x to a specific value and
only rely on the AT803x PHY settings.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49031
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 16 Mar 2016 09:27:11 +0000 (09:27 +0000)]
ar71xx: Use PHY fixups for Open Mesh MR900
The delays of PHY/MAC on the MR900 are done by u-boot and OpenWrt in
different ways. u-boot only modifies the ETH_CFG of the QCA955x based on
the link speed. But OpenWrt can only modify the PHY delays based on the
link speed.
This can lead to communication problems when u-boot initializes the ETH_CFG
for a specific link speed (e.g. 10BASE-T) but then OpenWrt the sets the PHY
delays to an incompatible value.
Instead reset the ETH_CFG delay bits of the QCA955x to a specific value and
only rely on the AT803x PHY settings.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49030
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 16 Mar 2016 09:27:08 +0000 (09:27 +0000)]
ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
Some u-boot versions for QCA955x change the delays based on the link speed
during boot. This usually breaks the support of other linkspeeds when
OpenWrt is booted. It also conflicts with the
at803x_platform_data::fixup_rgmii_tx_delay. OpenWrt has to set its own
values in QCA955X_GMAC_REG_ETH_CFG.
The default RGMII values from the Atheros u-boot are currently used to
preset the existing mach files. These may have to be adjusted for boards
using different values but which are not currently set them explicitely in
OpenWrt.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Christian Beier <cb@shoutrlabs.com>
Cc: Chris R Blake <chrisrblake93@gmail.com>
Cc: Benjamin Berg <benjamin@sipsolutions.net>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Cc: Matthias Schiffer <mschiffer@universe-factory.net>
Cc: Dirk Neukirchen <dirkneukirchen@web.de>
Cc: Christian Mehlis <christian@m3hlis.de>
Cc: Luka Perkov <luka@openwrt.org>
Cc: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49029
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 16 Mar 2016 09:27:04 +0000 (09:27 +0000)]
ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg
Some u-boot versions for QCA955x set currently not cleared bits depending
on the used link speed. This breaks the rx/tx under OpenWrt. The mach-*.c
file is responsible to select the correct configuration bits and thus the
ath79_setup_qca955x_eth_cfg has to clear the unset.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49028
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 16 Mar 2016 09:27:01 +0000 (09:27 +0000)]
ar71xx: Extend the list of bits in QCA955X_GMAC_REG_ETH_CFG
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49027
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 16 Mar 2016 09:26:58 +0000 (09:26 +0000)]
ar71xx: Add support for the OMYlink OMY-X1
This patch adds support for the OMYlink OMY-X1
https://wiki.openwrt.org/toh/omylink/omy-x1
http://www.omylink.com/
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49026
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 16 Mar 2016 09:26:51 +0000 (09:26 +0000)]
tools/flex: update to 2.6.1
Update flex to 2.6.1
* Flex has moved to Github, adjust download link
* Remove patch that has been applied upstream
* Disable building tests to avoid circular dependency to bison
- disable also docs and examples at the same time
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49025
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 16 Mar 2016 09:26:48 +0000 (09:26 +0000)]
ramips: Add support for Xiaomi MiWiFi Nano
Xiaomi MiWiFi Nano is based on Mediatek MT7628 with 64MB ram 16MB flash
Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com>
v3 includes changes suggested by L. D. Pinney & Karl Palsson-
Eliminate en25q64 (4MB) flash chip
Alphabetization
Remove hyphen in model
Rename profile from miwifinano.mk to xiaomi.mk
Add gpios that are attached to leds
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49024
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 16 Mar 2016 09:26:42 +0000 (09:26 +0000)]
brcmfmac: Add Raspberry Pi 3 support
- Enable SDIO support on brcmfmac.
- Disable power managment for brcm2708 target.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49023
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:13:22 +0000 (17:13 +0000)]
kirkwood: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49022
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:12:08 +0000 (17:12 +0000)]
kirkwood: drop 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49021
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:06:21 +0000 (17:06 +0000)]
kirkwood: switch to 4.4
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49020
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:06:20 +0000 (17:06 +0000)]
kirkwood: add 4.4 support
Dropped patches because they applied upstream:
- 120-iomega_ix2_200.patch
- 150-pogoplug_e02.patch
Tested on dockstar and goflexnet.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49019
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:06:18 +0000 (17:06 +0000)]
uboot-kirkwood/goflexhome: explicit define the size of the last partition
Explicit sets the size of the mtdparts, because the kernel has also an explicit value.
If they have diffent sizes the ubi won't be detected.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49018
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:06:17 +0000 (17:06 +0000)]
uboot-kirkwood/goflexhome: add forgotten include openwrt-kirkwood-common.h"
otherwise the uboot is missing important commands like bootz
Signed-off-by: Martin Mueller <mm@sig21.net>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49017
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:06:16 +0000 (17:06 +0000)]
uboot-kirkwood/goflexhome: update bootargs to use new ubi style
Since switching to new ubi(kernel,squashfs,ubifs) layout, the kernel lies in a
ubi volume. Dropping the mtd parts because the mtd layout is saved in the
device-tree, which is appended to the zImage.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49016
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:06:15 +0000 (17:06 +0000)]
kirkwood/goflexnet/goflexhome: change mtd layout to use the last 3 mb
Previous the uboot was overwriting the device-tree's mtd layout to use
the last 3 mb.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49015
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:06:14 +0000 (17:06 +0000)]
kirkwood/goflexhome/goflexnet: merge "root" and unused mtd partitions into one volume "ubi"
The kernel will automatic attach mtd partitions named 'ubi' to ubi0.
Renaming the "root" partition into "ubi" will safe arguments
from the kernel cmdline.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49014
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:06:12 +0000 (17:06 +0000)]
linux/kirkwood: migrate goflexhome/goflexnet to new ubi style
Also using the new image build step format
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49013
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:06:11 +0000 (17:06 +0000)]
uboot/kirkwood: correct mtdparts + cmdline for new ubifs on dockstar
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49012
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:06:10 +0000 (17:06 +0000)]
kirkwood/dockstar: rename partition into ubi to use auto detection of target mtd
the kernel tries to use "ubi" or "data" labeled partition to find it's root filesystem.
dockstar don't need anymore mtdparts= nor root= bootarguments
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49011
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:06:09 +0000 (17:06 +0000)]
kirkwood/dockstar: use ubi(kernel, squashfs, ubifs) images
The new image requires `bootz` because of devicetree appending.
To flash a new image boot initramfs:
tftpboot 0x800000 openwrt-kirkwood-dockstar-initramfs-kernel.bin
bootz 0x800000
# detach if already attached
ubidetach -p /dev/$(grep ubi /proc/mtd|awk -F: '{print $1}')
# scp openwrt-kirkwood-dockstar-squashfs-factory.bin /tmp
ubiformat -f /tmp/openwrt-kirkwood-dockstar-squashfs-factory.bin
# attach is important to resize rootfs_data otherwise it wont boot
ubiattach -p /dev/$(grep ubi /proc/mtd|awk -F: '{print $1}')
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49010
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:06:08 +0000 (17:06 +0000)]
kirkwood: add DEVICE_VAR KERNEL_IN_UBI for kernel as volume in ubi images
depending on KERNEL_IN_UBI, the image.mk will create a ubi volume for the kernel
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49009
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 14 Mar 2016 17:06:06 +0000 (17:06 +0000)]
kirkwood: add feature devicetree
this platform already uses devicetree
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49008
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Fri, 11 Mar 2016 21:31:34 +0000 (21:31 +0000)]
brcm47xx: image: create standard TRX images using new building system
Apart from using our new building system there are 2 more changes:
1) Limit amount of images
So far we were generating all standard images (optimized one and two
with no loader) for every SUBTARGET. This is not needed, as e.g. the
only device requiring gzipped kernel is legacy Huawei E970.
2) Change output names
The new image building system requires specifying device name. This
forced picking some and resulted in:
openwrt-brcm47xx-$(SUBTARGET)-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-squashfs-gz.trx
openwrt-brcm47xx-$(SUBTARGET)-squashfs-noloader-nodictionary.trx
becoming:
openwrt-brcm47xx-$(SUBTARGET)-standard-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-standard-noloader-gz-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-standard-noloader-nodictionarylzma-squashfs.trx
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49006
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 11 Mar 2016 13:31:48 +0000 (13:31 +0000)]
Revert "kernel: Linux IP Virtual Server kernel modules (netfilter.mk patch)"
This reverts commit
845d82da156781135b027ecf75ff67e2253e06dd.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49005
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 21:19:58 +0000 (21:19 +0000)]
oxnas: complete NAND driver clean-up
some bit rot was accidentally left-out in r48986, remove it.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48997
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 20:15:59 +0000 (20:15 +0000)]
procd: fix respawn related warning
WARNING: Variable 'respawn' does not exist or is not an array/object
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48996
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:12:15 +0000 (19:12 +0000)]
tools/cmake: fix compile on Alpine Linux
internal jsoncpp include order leads to multiple build
errors on Alpine Linux which uses musl libc
use include order from upstream jsoncpp
first error was:
In file included from /usr/include/c++/5.3.0/stdexcept:38:0,
from /home/..../openwrt/build_dir/host/cmake-3.4.3/Utilities/cmjsoncpp/include/json/assertions.h:16,
from /home/..../openwrt/build_dir/host/cmake-3.4.3/Utilities/cmjsoncpp/src/lib_json/json_reader.cpp:7:
/usr/include/c++/5.3.0/exception:35:9: error: '#pragma' is not allowed here
#pragma GCC visibility push(default)
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48995
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:12:10 +0000 (19:12 +0000)]
ramips: Add support for GL-MT750
This patch adds support for GL-MT750.
GL-MT750 is powered by MT7620A and MT7610e, dual band 802.11ac, 2.4G 300Mbps and 5G 450Mbps.
It has 5 LANs, MMC interface, USB, a lot of IOs and PoE support.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48994
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:12:04 +0000 (19:12 +0000)]
ramips: Add support for GL-MT300N
This patch adds support for GL-MT300N.
GL-MT300N is powered by MT7620N with 16MB flash, 64MB RAM,
2 LANs, USB, UART, GPIO and PoE support.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48993
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:11:57 +0000 (19:11 +0000)]
ramips: Add support for GL-MT300A
This patches adds support for GL-MT300A.
GL-MT300A is powered by MT7620A. It has 16MB flash, 128MB RAM,
Two LANs, USB, UART and MMC daughter board.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48992
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:11:51 +0000 (19:11 +0000)]
tools/findutils: Update to 4.6.0
Update GNU findutils to the new stable version 4.6.0
Remove the patch for 32-bit buildhosts as the issue is fixed upstream.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48991
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:11:46 +0000 (19:11 +0000)]
package/devel/gdb: Update to 7.11
Update gdb to version 7.11
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48990
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:11:41 +0000 (19:11 +0000)]
toolchain/gdb: Update to 7.11
Update gdb to version 7.11
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48989
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:11:36 +0000 (19:11 +0000)]
pkg-config: Update to 0.29.1
* Bump pkg-config version to 0.29.1
* Use https for the source download (http gets directed there)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48988
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:11:32 +0000 (19:11 +0000)]
mm-macros: update to 0.9.10
Bump mm-macros to 0.9.10
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48987
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:11:28 +0000 (19:11 +0000)]
oxnas: clean-up NAND driver to fix probing issue
A re-write of the driver based on xway_nand.c and constants as
well as the cmd_ctrl() function from the original oxnas_nand.c
resulted in a extremely similar looking file (see diffsize),
and fixes the issue of NAND not being detected on newer kernels.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48986
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:11:23 +0000 (19:11 +0000)]
brcm2708: update patches to latest version
As usual these patches were extracted from the raspberry repo:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y
- Disable unused MFD RPISENSE driver.
- Disable ethernet HW checksums in order to avoid kernel exceptions.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48985
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:11:17 +0000 (19:11 +0000)]
procd: support pidfile writing.
procd from revision
b12bb150ed38a4409bef5127c77b060ee616b860 supports
writing a pidfile. This adds support for setting that parameter with
standard init script hooks:
procd_set_param pidfile /var/run/someprocess.pid
Signed-off-by: Karl Palsson <karlp@etactica.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48984
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:11:13 +0000 (19:11 +0000)]
ar71xx: Arduino Yun board 'WLAN RST' button support
This patch adds support for Arduino Yun board "WLAN RST" button.
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48983
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:11:09 +0000 (19:11 +0000)]
kernel: Linux IP Virtual Server kernel modules (netfilter.mk patch)
IPVS (IP Virtual Server) implements transport-layer load balancing inside the Linux kernel
so called Layer-4 switching.
IPVS running on a host acts as a load balancer at the front of a cluster of real servers, it
can direct requests for TCP/UDP based services to the real servers, and makes services of
the real servers to appear as a virtual service on a single IP address.
Signed-off-by: Mauro Mozzarelli <mauro@ezplanet.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48982
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:11:03 +0000 (19:11 +0000)]
procd: bump to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48981
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:10:58 +0000 (19:10 +0000)]
brcm63xx: fix BCM3368 interrupt controller addresses
Looks like the addresses for BCM3368 were wrongly defined when DT
support was introduced.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48980
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:10:54 +0000 (19:10 +0000)]
brcm63xx/lzma-loader: fix O32 ABI conformance
According to the calling convention of the o32 ABI the caller
function must reserve stack space for $a0-$a3 registers in case
the callee needs to save its arguments.
The assembly code of the loader does not reserve stack space for
these registers thus when the 'loader_main' function needs to save
its arguments, those will be stored in the 'workspace' area instead
of the stack.
Because the workspace area is also used by other part of the code, the
saved register values gets overwritten and this often leads to failed
kernel boots.
Fix the code to reserve stack space for the registers to avoid this
error.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
[noltari: apply the fix for brcm63xx too]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48979
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:10:48 +0000 (19:10 +0000)]
tools/flock: fix compile on Alpine Linux
fixes build errors:
src/flock.c:208:34: error: 'O_NOCTTY' undeclared (first use in this function)
fd = open(filename, O_RDONLY|O_NOCTTY|O_CREAT, 0666);
src/flock.c:208:43: error: 'O_CREAT' undeclared (first use in this function)
fd = open(filename, O_RDONLY|O_NOCTTY|O_CREAT, 0666);
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48978
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:07:26 +0000 (19:07 +0000)]
ar71xx: add support for the Telldus TellStick ZNet Lite
Signed-off-by: Micke Prag <micke.prag@telldus.se>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48977
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 10 Mar 2016 19:07:17 +0000 (19:07 +0000)]
base-files: add function ucidef_set_interface_raw to enable default configuration on interfaces other than lan and wan.
Signed-off-by: Micke Prag <micke.prag@telldus.se>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48976
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Wed, 9 Mar 2016 06:34:29 +0000 (06:34 +0000)]
brcm47xx: image: move disabled devices to the new building system
This only drops WGR614 V9 which has 2 MiB flash and it's unlikely to get
any interest.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48975
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Wed, 9 Mar 2016 06:34:25 +0000 (06:34 +0000)]
brcm47xx: image: switch Linksys WRT54G3GV2-VF to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48974
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Tue, 8 Mar 2016 18:33:25 +0000 (18:33 +0000)]
brcm47xx: image: switch Netgear WGT634U to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48973
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Tue, 8 Mar 2016 18:33:22 +0000 (18:33 +0000)]
brcm47xx: image: switch rest of 64k block devices to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48972
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Tue, 8 Mar 2016 18:33:19 +0000 (18:33 +0000)]
brcm47xx: image: switch Motorola devices to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48971
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Tue, 8 Mar 2016 18:33:16 +0000 (18:33 +0000)]
brcm47xx: image: switch D-Link DWL-3150 to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48970
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 8 Mar 2016 18:12:02 +0000 (18:12 +0000)]
openvpn: add support for X.509 name options
x509-username-field was added in OpenVPN 2.2, and verify-x509-name was
added in 2.3. This fixes ticket #18807.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48969
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 8 Mar 2016 18:11:59 +0000 (18:11 +0000)]
ramips: add support for Planex MZK-WDPR.
add support for Planex MZK-WDPR.
MZK-WDPR(MZK-WDPR-R01) is internet radio tuner.
This patch is "network board" in MZK-WDPR.
LCD board is non OpenWrt Platform.
Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48968
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 8 Mar 2016 18:11:55 +0000 (18:11 +0000)]
brcm2708: add Raspberry Pi 3 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48967
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 8 Mar 2016 18:11:49 +0000 (18:11 +0000)]
brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48966
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 8 Mar 2016 18:11:40 +0000 (18:11 +0000)]
brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48965
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 8 Mar 2016 18:11:37 +0000 (18:11 +0000)]
include: add Cortex-A53 CPU_TYPE
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48964
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Tue, 8 Mar 2016 11:05:10 +0000 (11:05 +0000)]
bcm53xx: update bcm47xx_sprom to the latest 4.6 queued version
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48963
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Tue, 8 Mar 2016 08:29:32 +0000 (08:29 +0000)]
bcm53xx: fix SPROM driver compilation with ssb/bcma as module
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48962
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Tue, 8 Mar 2016 08:29:29 +0000 (08:29 +0000)]
bcm53xx: revert patch removing imprecise abort workaround
It seems it still happens on some devices.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48961
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Mon, 7 Mar 2016 23:09:26 +0000 (23:09 +0000)]
kernel: backport bcma 4.6 changes for flashes
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48960
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Mon, 7 Mar 2016 22:37:09 +0000 (22:37 +0000)]
mac80211: backport brcmfmac patchset with driver setting concept
This prepares brcmfmac for better country handling and fixes BCM4360
support which was always failing with:
[ 13.249195] brcmfmac: brcmf_pcie_download_fw_nvram: FW failed to initialize
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48959
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 7 Mar 2016 21:00:58 +0000 (21:00 +0000)]
mt76: update to the latest version, adds some mt7603/mt7628 fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48958
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 7 Mar 2016 21:00:49 +0000 (21:00 +0000)]
musl: update to latest git, adds some fixes for the mips64 port and regular expressions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48957
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 7 Mar 2016 21:00:46 +0000 (21:00 +0000)]
kernel: add MIPS kernel fix for an uninitialized CPU map
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48956
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 7 Mar 2016 17:56:58 +0000 (17:56 +0000)]
kernel: remove linux 4.3 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48955
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 7 Mar 2016 17:56:53 +0000 (17:56 +0000)]
ramips: convert the remaining subtargets to 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48954
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 7 Mar 2016 17:05:03 +0000 (17:05 +0000)]
ramips: fix subtarget kernel version assignment (only mt7621 is ready for now)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48953
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 7 Mar 2016 16:35:43 +0000 (16:35 +0000)]
ubox: update to the latest version, fixes an error on processing invalid modules
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48952
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 7 Mar 2016 16:33:34 +0000 (16:33 +0000)]
ramips: add linux 4.4 support, update mt7621 subtarget to 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48951
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 7 Mar 2016 14:34:14 +0000 (14:34 +0000)]
bsdiff: add missing host build dependency on bzip2 (fixes #21990)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48950
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 7 Mar 2016 11:03:44 +0000 (11:03 +0000)]
lantiq: print profile name in dsl lucistat
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48949
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 7 Mar 2016 11:03:41 +0000 (11:03 +0000)]
ltq-vdsl-app: do not set the reserved bit 4 in the xTSE 8
I do not know if this causes any problems now, but we should not set
it, because it is reserved. Some more recent versions of the Lantiq DSL
API driver and Control is checking if only valid bits are set.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48948
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 7 Mar 2016 11:03:38 +0000 (11:03 +0000)]
ltq-vdsl-app: make it possible to configure ADSL/VDSL independently
There are some cases where ISPs are running ATM over VDSL or PTM over
ADSL, this is not the common case, but these cases exist. Make it
possible to configure OpenWrt for such cases by adding a new config
option line_mode.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48947
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 7 Mar 2016 11:03:35 +0000 (11:03 +0000)]
ltq-vdsl-app: sync annex option between from ADSL package
The detailed annex option were only available in the danube DSL app
including the activation of G.992.2 Annex A (ADSL Lite). This is now
also added to the vdsl app for the vrx200.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48946
3c298f89-4303-0410-b956-
a3cf2f4a3e73