ramips: rt305x: sort Kconfig/Makefile entries
[openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x /
2011-07-28 juhosgramips: rt305x: sort Kconfig/Makefile entries
2011-07-24 nbdrtl8366: unify rtl8366s and rtl8366rb platform data
2011-07-03 juhosgramips: specify eeprom file name on RT305X
2011-07-03 juhosgramips: use lowercase partiion names on the WCR150GN...
2011-07-03 juhosgramips: update partition map for DIR-300-B1
2011-07-03 juhosgramips: consistently use 'firmware' name for sysupgrade...
2011-07-03 juhosgramips: update HW550-3G mtd partitions
2011-07-03 juhosgramips: set cp0_perfcount_irq for RT305X
2011-04-04 juhosgramips: initial board support for MOFI3500-3GN
2011-03-27 juhosgramips: define GPIO chips separately for each SoCs
2011-03-27 juhosgramips: move GPIO definitions into a separate header...
2011-03-27 juhosgramips: fix dir-300 mtd layout
2011-03-27 juhosgramips: enable MDIO on the HW550-3G board
2011-03-27 juhosgramips: add sysupgrade and status LED support for HW550-3G
2011-03-13 juhosgramips: initial board support for Aztech HW550-3G
2011-01-26 juhosgramips: register watchdog device on the rt305x boards
2011-01-26 juhosgramips: add watchdog device for RT305x
2011-01-26 juhosgramips: implement clock API for RT305X
2011-01-26 juhosgramips: remove extern and __init from function prototypes
2010-12-14 juhosgramips: handle OTG interrupt on the RT305x SoC
2010-12-08 juhosgramips: ramips_esw: convert it to be a platform driver
2010-12-05 juhosgramips: use tabs instead of spaces in mach-f5d8235...
2010-11-24 juhosgramips: add support for Belkin F5D8235 v2 board
2010-09-27 juhosgramips: Ralink RT305x, support for Prolink PWH2004...
2010-08-15 juhosgramips: add support for Sparklan WCR-150GN board
2010-04-22 juhosgramips: use KEY_RESTART and KEY_WPS_BUTTON code for...
2010-03-31 juhosgramips: annotate device register function prototypes...
2010-03-30 juhosgramips: register wifi device on the rt305x based boards
2010-03-30 blogicThe ralink rt305x board has a wireless card that can...
2010-01-31 juhosgramips_eth: pass sys_clk via platform_data
2010-01-30 juhosgramips: register gpio buttons on the Fonera 2.0N board
2010-01-30 juhosgramips: register gpio buttons on the WHR-G300N board
2010-01-30 juhosgramips: register gpio buttons on the V22RW-2x2 board
2010-01-30 juhosgramips: register gpio buttons on the DIR-300 revB board
2010-01-30 juhosgramips: include 'linux/leds.h' from 'dev-gpio-leds.h'
2010-01-30 juhosgramips: rename dev_gpio_leds.h to dev-gpio-leds.h
2010-01-30 juhosgramips: update mips multi-machine stuff
2009-10-30 juhosgramips: register ethernet device on the WHR-G300N and...
2009-10-26 juhosgramips: use definitions from rt305x_regs, and nuke...
2009-10-26 juhosgramips: move ramips_eth_platform_data into a separate...
2009-10-26 juhosgramips: use resource to pass irq and base address to...
2009-10-25 juhosgramips: register ethernet device on the DIR-300 board
2009-10-24 blogic[ramips] make ethernet a platform device
2009-10-24 blogic[ramips] adds mach type for fonera20n
2009-10-18 juhosgramips: add preliminary support for the DIR-300 revB...
2009-09-04 juhosg[ramips] add GPIO configuration feature
2009-09-02 juhosg[ramips] initial support for the AP-R3052-V22RW-2X2...
2009-09-02 juhosg[ramips] use common code for early_serial setup
2009-09-02 juhosg[ramips] share prom code
2009-09-01 juhosg[ramips] remove unused *_MACH_GENERIC config options
2009-08-31 juhosg[ramips] share machine registration code
2009-08-31 juhosg[ramips] use common get_system_type function
2009-08-31 juhosg[ramips] share memory size detection code
2009-08-31 juhosg[ramips] add common setup code
2009-08-31 juhosg[ramips] register GPIO LEDs on the WHR-G300N board
2009-08-31 juhosg[ramips] add common GPIO LED support
2009-08-30 juhosg[ramips] share common INTC code
2009-08-30 juhosg[ramips] initial support for RT288x/RT305x