ramips: register gpio buttons on the DIR-300 revB board

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19410 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index ef52c05..7939c35 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -10,6 +10,7 @@ config RT305X_MACH_WHR_G300N
 config RT305X_MACH_DIR_300_REVB
        bool "D-Link DIR-300 revB board support"
        default y
+       select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 
 config RT305X_MACH_V22RW_2X2

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c
index 7acd113..dd2a5f4 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c
@@ -1,7 +1,7 @@
 /*
  *  D-Link DIR-300 rev B board support
  *
- *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
@@ -15,6 +15,7 @@
 #include <linux/mtd/physmap.h>
 
 #include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
 #include <asm/mach-ralink/dev-gpio-leds.h>
 #include <asm/mach-ralink/rt305x.h>
 #include <asm/mach-ralink/rt305x_regs.h>
@@ -28,6 +29,8 @@
 #define DIR_300B_GPIO_BUTTON_WPS       0       /* active low */
 #define DIR_300B_GPIO_BUTTON_RESET     10      /* active low */
 
+#define DIR_300B_BUTTONS_POLL_INTERVAL 20
+
 #ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition dir_300b_partitions[] = {
        {
@@ -84,6 +87,24 @@ static struct gpio_led dir_300b_leds_gpio[] __initdata = {
        }
 };
 
+static struct gpio_button dir_300b_gpio_buttons[] __initdata = {
+       {
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = BTN_0,
+               .threshold      = 3,
+               .gpio           = DIR_300B_GPIO_BUTTON_RESET,
+               .active_low     = 1,
+       }, {
+               .desc           = "wps",
+               .type           = EV_KEY,
+               .code           = BTN_1,
+               .threshold      = 3,
+               .gpio           = DIR_300B_GPIO_BUTTON_WPS,
+               .active_low     = 1,
+       }
+};
+
 static void __init dir_300b_init(void)
 {
        rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
@@ -92,6 +113,9 @@ static void __init dir_300b_init(void)
        rt305x_register_ethernet();
        ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_300b_leds_gpio),
                                  dir_300b_leds_gpio);
+       ramips_register_gpio_buttons(-1, DIR_300B_BUTTONS_POLL_INTERVAL,
+                                    ARRAY_SIZE(dir_300b_gpio_buttons),
+                                    dir_300b_gpio_buttons);
 }
 
 MIPS_MACHINE(RAMIPS_MACH_DIR_300_REVB, "DIR-300-revB", "D-Link DIR-300 revB",

diff --git a/target/linux/ramips/rt305x/config-2.6.30 b/target/linux/ramips/rt305x/config-2.6.30
index 59c2de2..0977aca 100644 (file)
--- a/target/linux/ramips/rt305x/config-2.6.30
+++ b/target/linux/ramips/rt305x/config-2.6.30
@@ -109,7 +109,7 @@ CONFIG_PHYLIB=y
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PROBE_INITRD_HEADER is not set
-# CONFIG_RALINK_DEV_GPIO_BUTTONS is not set
+CONFIG_RALINK_DEV_GPIO_BUTTONS=y
 CONFIG_RALINK_DEV_GPIO_LEDS=y
 # CONFIG_RALINK_RT288X is not set
 CONFIG_RALINK_RT305X=y

diff --git a/target/linux/ramips/rt305x/config-2.6.32 b/target/linux/ramips/rt305x/config-2.6.32
index 2576681..d6e873f 100644 (file)
--- a/target/linux/ramips/rt305x/config-2.6.32
+++ b/target/linux/ramips/rt305x/config-2.6.32
@@ -112,7 +112,7 @@ CONFIG_PHYLIB=y
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PROBE_INITRD_HEADER is not set
-# CONFIG_RALINK_DEV_GPIO_BUTTONS is not set
+CONFIG_RALINK_DEV_GPIO_BUTTONS=y
 CONFIG_RALINK_DEV_GPIO_LEDS=y
 # CONFIG_RALINK_RT288X is not set
 CONFIG_RALINK_RT305X=y