target/linux/ramips/patches-3.9/0140-MIPS-ralink-DTS-file-updates.patch

   1 From cee339922876e924295c27e274923d1b381f5057 Mon Sep 17 00:00:00 2001
   2 From: John Crispin <blogic@openwrt.org>
   3 Date: Tue, 30 Apr 2013 17:27:46 +0200
   4 Subject: [PATCH 140/164] MIPS: ralink DTS file updates
   5
   6 Signed-off-by: John Crispin <blogic@openwrt.org>
   7 ---
   8  arch/mips/ralink/Kconfig                      |    8 +
   9  arch/mips/ralink/dts/Makefile                 |    2 +
  10  arch/mips/ralink/dts/mt7620a.dtsi             |  238 ++++++++++++++++++++++++-
  11  arch/mips/ralink/dts/mt7620a_eval.dts         |  111 ++++++++++++
  12  arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts |   99 ++++++++++
  13  arch/mips/ralink/dts/rt2880.dtsi              |   17 ++
  14  arch/mips/ralink/dts/rt2880_eval.dts          |    6 +
  15  arch/mips/ralink/dts/rt3050.dtsi              |   31 +++-
  16  arch/mips/ralink/dts/rt3052_eval.dts          |   19 +-
  17  arch/mips/ralink/dts/rt5350.dtsi              |  227 +++++++++++++++++++++++
  18  arch/mips/ralink/dts/rt5350_eval.dts          |   69 +++++++
  19  11 files changed, 824 insertions(+), 3 deletions(-)
  20  create mode 100644 arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts
  21  create mode 100644 arch/mips/ralink/dts/rt5350.dtsi
  22  create mode 100644 arch/mips/ralink/dts/rt5350_eval.dts
  23
  24 diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
  25 index 026e823..38540a4 100644
  26 --- a/arch/mips/ralink/Kconfig
  27 +++ b/arch/mips/ralink/Kconfig
  28 @@ -42,6 +42,10 @@ choice
  29                 bool "RT305x eval kit"
  30                 depends on SOC_RT305X
  31
  32 +       config DTB_RT5350_EVAL
  33 +               bool "RT5350 eval kit"
  34 +               depends on SOC_RT305X
  35 +
  36         config DTB_RT3883_EVAL
  37                 bool "RT3883 eval kit"
  38                 depends on SOC_RT3883
  39 @@ -50,6 +54,10 @@ choice
  40                 bool "MT7620A eval kit"
  41                 depends on SOC_MT7620
  42
  43 +       config DTB_MT7620A_MT7610E_EVAL
  44 +               bool "MT7620A + MT7610E eval kit"
  45 +               depends on SOC_MT7620
  46 +
  47  endchoice
  48
  49  endif
  50 diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
  51 index 18194fa..0bd12b5 100644
  52 --- a/arch/mips/ralink/dts/Makefile
  53 +++ b/arch/mips/ralink/dts/Makefile
  54 @@ -1,4 +1,6 @@
  55  obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
  56  obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
  57 +obj-$(CONFIG_DTB_RT5350_EVAL) := rt5350_eval.dtb.o
  58  obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
  59  obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
  60 +obj-$(CONFIG_DTB_MT7620A_MT7610E_EVAL) := mt7620a_mt7610e_eval.dtb.o
  61 diff --git a/arch/mips/ralink/dts/mt7620a.dtsi b/arch/mips/ralink/dts/mt7620a.dtsi
  62 index 08bf24f..104abfb 100644
  63 --- a/arch/mips/ralink/dts/mt7620a.dtsi
  64 +++ b/arch/mips/ralink/dts/mt7620a.dtsi
  65 @@ -25,14 +25,36 @@
  66                 #size-cells = <1>;
  67
  68                 sysc@0 {
  69 -                       compatible = "ralink,mt7620a-sysc";
  70 +                       compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
  71                         reg = <0x0 0x100>;
  72                 };
  73
  74 +               timer@100 {
  75 +                       compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
  76 +                       reg = <0x100 0x20>;
  77 +
  78 +                       interrupt-parent = <&intc>;
  79 +                       interrupts = <1>;
  80 +               };
  81 +
  82 +               watchdog@120 {
  83 +                       compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
  84 +                       reg = <0x120 0x10>;
  85 +
  86 +                       resets = <&rstctrl 8>;
  87 +                       reset-names = "wdt";
  88 +
  89 +                       interrupt-parent = <&intc>;
  90 +                       interrupts = <1>;
  91 +               };
  92 +
  93                 intc: intc@200 {
  94                         compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
  95                         reg = <0x200 0x100>;
  96
  97 +                       resets = <&rstctrl 19>;
  98 +                       reset-names = "intc";
  99 +
 100                         interrupt-controller;
 101                         #interrupt-cells = <1>;
 102
 103 @@ -43,16 +65,230 @@
 104                 memc@300 {
 105                         compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
 106                         reg = <0x300 0x100>;
 107 +
 108 +                       resets = <&rstctrl 20>;
 109 +                       reset-names = "mc";
 110 +
 111 +                       interrupt-parent = <&intc>;
 112 +                       interrupts = <3>;
 113 +               };
 114 +
 115 +               uart@500 {
 116 +                       compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
 117 +                       reg = <0x500 0x100>;
 118 +
 119 +                       resets = <&rstctrl 12>;
 120 +                       reset-names = "uart";
 121 +
 122 +                       interrupt-parent = <&intc>;
 123 +                       interrupts = <5>;
 124 +
 125 +                       reg-shift = <2>;
 126 +
 127 +                       status = "disabled";
 128 +               };
 129 +
 130 +               gpio0: gpio@600 {
 131 +                       compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
 132 +                       reg = <0x600 0x34>;
 133 +
 134 +                       resets = <&rstctrl 13>;
 135 +                       reset-names = "pio";
 136 +
 137 +                       interrupt-parent = <&intc>;
 138 +                       interrupts = <6>;
 139 +
 140 +                       gpio-controller;
 141 +                       #gpio-cells = <2>;
 142 +
 143 +                       ralink,gpio-base = <0>;
 144 +                       ralink,num-gpios = <24>;
 145 +                       ralink,register-map = [ 00 04 08 0c
 146 +                                               20 24 28 2c
 147 +                                               30 34 ];
 148 +
 149 +                       status = "disabled";
 150 +               };
 151 +
 152 +               gpio1: gpio@638 {
 153 +                       compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
 154 +                       reg = <0x638 0x24>;
 155 +
 156 +                       interrupt-parent = <&intc>;
 157 +                       interrupts = <6>;
 158 +
 159 +                       gpio-controller;
 160 +                       #gpio-cells = <2>;
 161 +
 162 +                       ralink,gpio-base = <24>;
 163 +                       ralink,num-gpios = <16>;
 164 +                       ralink,register-map = [ 00 04 08 0c
 165 +                                               10 14 18 1c
 166 +                                               20 24 ];
 167 +
 168 +                       status = "disabled";
 169 +               };
 170 +
 171 +               gpio2: gpio@660 {
 172 +                       compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
 173 +                       reg = <0x660 0x24>;
 174 +
 175 +                       interrupt-parent = <&intc>;
 176 +                       interrupts = <6>;
 177 +
 178 +                       gpio-controller;
 179 +                       #gpio-cells = <2>;
 180 +
 181 +                       ralink,gpio-base = <40>;
 182 +                       ralink,num-gpios = <32>;
 183 +                       ralink,register-map = [ 00 04 08 0c
 184 +                                               10 14 18 1c
 185 +                                               20 24 ];
 186 +
 187 +                       status = "disabled";
 188 +               };
 189 +
 190 +               i2c@900 {
 191 +                       compatible = "link,mt7620a-i2c", "ralink,rt2880-i2c";
 192 +                       reg = <0x900 0x100>;
 193 +
 194 +                       resets = <&rstctrl 16>;
 195 +                       reset-names = "i2c";
 196 +
 197 +                       #address-cells = <1>;
 198 +                       #size-cells = <0>;
 199 +
 200 +                       status = "disabled";
 201 +               };
 202 +
 203 +               spi@b00 {
 204 +                       compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
 205 +                       reg = <0xb00 0x100>;
 206 +
 207 +                       resets = <&rstctrl 18>;
 208 +                       reset-names = "spi";
 209 +
 210 +                       #address-cells = <1>;
 211 +                       #size-cells = <1>;
 212 +
 213 +                       status = "disabled";
 214                 };
 215
 216                 uartlite@c00 {
 217                         compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
 218                         reg = <0xc00 0x100>;
 219
 220 +                       resets = <&rstctrl 19>;
 221 +                       reset-names = "uartl";
 222 +
 223                         interrupt-parent = <&intc>;
 224                         interrupts = <12>;
 225
 226                         reg-shift = <2>;
 227                 };
 228 +
 229 +               systick@d00 {
 230 +                       compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
 231 +                       reg = <0xd00 0x10>;
 232 +
 233 +                       resets = <&rstctrl 28>;
 234 +                       reset-names = "intc";
 235 +
 236 +                       interrupt-parent = <&cpuintc>;
 237 +                       interrupts = <7>;
 238 +               };
 239 +
 240 +               gdma@2800 {
 241 +                       compatible = "ralink,mt7620a-gdma", "ralink,rt2880-gdma";
 242 +                       reg = <0x2800 0x800>;
 243 +
 244 +                       resets = <&rstctrl 14>;
 245 +                       reset-names = "dma";
 246 +
 247 +                       interrupt-parent = <&intc>;
 248 +                       interrupts = <7>;
 249 +               };
 250 +       };
 251 +
 252 +       rstctrl: rstctrl {
 253 +               compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
 254 +               #reset-cells = <1>;
 255 +       };
 256 +
 257 +       ubsphy {
 258 +               compatible = "ralink,mt7620a-usbphy";
 259 +
 260 +               resets = <&rstctrl 22 &rstctrl 25>;
 261 +               reset-names = "host", "device";
 262 +       };
 263 +
 264 +       ethernet@10100000 {
 265 +               compatible = "ralink,mt7620a-eth";
 266 +               reg = <0x10100000 10000>;
 267 +
 268 +               #address-cells = <1>;
 269 +               #size-cells = <0>;
 270 +
 271 +               interrupt-parent = <&cpuintc>;
 272 +               interrupts = <5>;
 273 +
 274 +               status = "disabled";
 275 +
 276 +               mdio-bus {
 277 +                       #address-cells = <1>;
 278 +                       #size-cells = <0>;
 279 +
 280 +                       status = "disabled";
 281 +               };
 282 +       };
 283 +
 284 +       gsw@10110000 {
 285 +               compatible = "ralink,mt7620a-gsw";
 286 +               reg = <0x10110000 8000>;
 287 +
 288 +               interrupt-parent = <&intc>;
 289 +               interrupts = <17>;
 290 +
 291 +               status = "disabled";
 292 +       };
 293 +
 294 +       sdhci@10130000 {
 295 +               compatible = "ralink,mt7620a-sdhci";
 296 +               reg = <0x10130000 4000>;
 297 +
 298 +               interrupt-parent = <&intc>;
 299 +               interrupts = <14>;
 300 +
 301 +               status = "disabled";
 302 +       };
 303 +
 304 +       ehci@101c0000 {
 305 +               compatible = "ralink,rt3xxx-ehci";
 306 +               reg = <0x101c0000 0x1000>;
 307 +
 308 +               interrupt-parent = <&intc>;
 309 +               interrupts = <18>;
 310 +       };
 311 +
 312 +       ohci@101c1000 {
 313 +               compatible = "ralink,rt3xxx-ohci";
 314 +               reg = <0x101c1000 0x1000>;
 315 +
 316 +               interrupt-parent = <&intc>;
 317 +               interrupts = <18>;
 318 +       };
 319 +
 320 +       pcie@10140000 {
 321 +               compatible = "ralink,mt7620a-pci";
 322 +               reg = <0x10140000 0x100
 323 +                       0x10142000 0x100>;
 324 +
 325 +               resets = <&rstctrl 26>;
 326 +               reset-names = "pcie0";
 327 +
 328 +               interrupt-parent = <&cpuintc>;
 329 +               interrupts = <4>;
 330 +
 331 +               status = "disabled";
 332         };
 333  };
 334 diff --git a/arch/mips/ralink/dts/mt7620a_eval.dts b/arch/mips/ralink/dts/mt7620a_eval.dts
 335 index 35eb874..b56f449 100644
 336 --- a/arch/mips/ralink/dts/mt7620a_eval.dts
 337 +++ b/arch/mips/ralink/dts/mt7620a_eval.dts
 338 @@ -13,4 +13,115 @@
 339         chosen {
 340                 bootargs = "console=ttyS0,57600";
 341         };
 342 +
 343 +       palmbus@10000000 {
 344 +               sysc@0 {
 345 +                       ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
 346 +                       ralink,gpiomux = "i2c", "jtag";
 347 +                       ralink,uartmux = "gpio";
 348 +                       ralink,wdtmux = <1>;
 349 +               };
 350 +
 351 +               gpio0: gpio@600 {
 352 +                       status = "okay";
 353 +               };
 354 +
 355 +               spi@b00 {
 356 +                       status = "okay";
 357 +
 358 +                       m25p80@0 {
 359 +                               #address-cells = <1>;
 360 +                               #size-cells = <1>;
 361 +                               compatible = "en25q64";
 362 +                               reg = <0 0>;
 363 +                               linux,modalias = "m25p80", "en25q64";
 364 +                               spi-max-frequency = <10000000>;
 365 +
 366 +                               partition@0 {
 367 +                                       label = "u-boot";
 368 +                                       reg = <0x0 0x30000>;
 369 +                                       read-only;
 370 +                               };
 371 +
 372 +                               partition@30000 {
 373 +                                       label = "u-boot-env";
 374 +                                       reg = <0x30000 0x10000>;
 375 +                                       read-only;
 376 +                               };
 377 +
 378 +                               factory: partition@40000 {
 379 +                                       label = "factory";
 380 +                                       reg = <0x40000 0x10000>;
 381 +                                       read-only;
 382 +                               };
 383 +
 384 +                               partition@50000 {
 385 +                                       label = "firmware";
 386 +                                       reg = <0x50000 0x7b0000>;
 387 +                               };
 388 +                       };
 389 +               };
 390 +       };
 391 +
 392 +       ethernet@10100000 {
 393 +               status = "okay";
 394 +
 395 +               port@4 {
 396 +                       compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
 397 +                       reg = <4>;
 398 +                       phy-mode = "rgmii";
 399 +                       phy-handle = <&phy4>;
 400 +               };
 401 +
 402 +               port@5 {
 403 +                       compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
 404 +                       reg = <5>;
 405 +                       phy-mode = "rgmii";
 406 +                       phy-handle = <&phy5>;
 407 +               };
 408 +
 409 +               mdio-bus {
 410 +                       status = "okay";
 411 +
 412 +                       phy4: ethernet-phy@4 {
 413 +                               reg = <4>;
 414 +                               phy-mode = "rgmii";
 415 +                       };
 416 +
 417 +                       phy5: ethernet-phy@5 {
 418 +                               reg = <5>;
 419 +                               phy-mode = "rgmii";
 420 +                       };
 421 +               };
 422 +       };
 423 +
 424 +       gsw@10110000 {
 425 +               status = "okay";
 426 +               ralink,port4 = "gmac";
 427 +       };
 428 +
 429 +       sdhci@10130000 {
 430 +               status = "okay";
 431 +       };
 432 +
 433 +       pcie@10140000 {
 434 +               status = "okay";
 435 +       };
 436 +
 437 +       gpio-keys-polled {
 438 +               compatible = "gpio-keys";
 439 +               #address-cells = <1>;
 440 +               #size-cells = <0>;
 441 +               poll-interval = <20>;
 442 +               s2 {
 443 +                       label = "S2";
 444 +                       gpios = <&gpio0 1 1>;
 445 +                       linux,code = <0x100>;
 446 +               };
 447 +               s3 {
 448 +                       label = "S3";
 449 +                       gpios = <&gpio0 2 1>;
 450 +                       linux,code = <0x101>;
 451 +               };
 452 +       };
 453  };
 454 diff --git a/arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts b/arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts
 455 new file mode 100644
 456 index 0000000..0d7755b
 457 --- /dev/null
 458 +++ b/arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts
 459 @@ -0,0 +1,99 @@
 460 +/dts-v1/;
 461 +
 462 +/include/ "mt7620a.dtsi"
 463 +
 464 +/ {
 465 +       compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
 466 +       model = "Ralink MT7620A evaluation board";
 467 +
 468 +       memory@0 {
 469 +               reg = <0x0 0x2000000>;
 470 +       };
 471 +
 472 +       chosen {
 473 +               bootargs = "console=ttyS0,57600";
 474 +       };
 475 +
 476 +       palmbus@10000000 {
 477 +               sysc@0 {
 478 +                       ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
 479 +                       ralink,gpiomux = "i2c", "jtag";
 480 +                       ralink,uartmux = "gpio";
 481 +                       ralink,wdtmux = <1>;
 482 +               };
 483 +
 484 +               gpio0: gpio@600 {
 485 +                       status = "okay";
 486 +               };
 487 +
 488 +               spi@b00 {
 489 +                       status = "okay";
 490 +
 491 +                       m25p80@0 {
 492 +                               #address-cells = <1>;
 493 +                               #size-cells = <1>;
 494 +                               compatible = "en25q64";
 495 +                               reg = <0 0>;
 496 +                               linux,modalias = "m25p80", "en25q64";
 497 +                               spi-max-frequency = <10000000>;
 498 +
 499 +                               partition@0 {
 500 +                                       label = "u-boot";
 501 +                                       reg = <0x0 0x30000>;
 502 +                                       read-only;
 503 +                               };
 504 +
 505 +                               partition@30000 {
 506 +                                       label = "u-boot-env";
 507 +                                       reg = <0x30000 0x10000>;
 508 +                                       read-only;
 509 +                               };
 510 +
 511 +                               factory: partition@40000 {
 512 +                                       label = "factory";
 513 +                                       reg = <0x40000 0x10000>;
 514 +                                       read-only;
 515 +                               };
 516 +
 517 +                               partition@50000 {
 518 +                                       label = "firmware";
 519 +                                       reg = <0x50000 0x7b0000>;
 520 +                               };
 521 +                       };
 522 +               };
 523 +       };
 524 +
 525 +       ethernet@10100000 {
 526 +               status = "okay";
 527 +       };
 528 +
 529 +       gsw@10110000 {
 530 +               status = "okay";
 531 +               ralink,port4 = "ephy";
 532 +       };
 533 +
 534 +       sdhci@10130000 {
 535 +               status = "okay";
 536 +       };
 537 +
 538 +       pcie@10140000 {
 539 +               status = "okay";
 540 +       };
 541 +
 542 +       gpio-keys-polled {
 543 +               compatible = "gpio-keys";
 544 +               #address-cells = <1>;
 545 +               #size-cells = <0>;
 546 +               poll-interval = <20>;
 547 +               wps {
 548 +                       label = "wps";
 549 +                       gpios = <&gpio0 12 1>;
 550 +                       linux,code = <0x100>;
 551 +               };
 552 +               reset {
 553 +                       label = "reset";
 554 +                       gpios = <&gpio0 13 1>;
 555 +                       linux,code = <0x101>;
 556 +               };
 557 +       };
 558 +};
 559 diff --git a/arch/mips/ralink/dts/rt2880.dtsi b/arch/mips/ralink/dts/rt2880.dtsi
 560 index 182afde..2a34b8d 100644
 561 --- a/arch/mips/ralink/dts/rt2880.dtsi
 562 +++ b/arch/mips/ralink/dts/rt2880.dtsi
 563 @@ -55,4 +55,21 @@
 564                         reg-shift = <2>;
 565                 };
 566         };
 567 +
 568 +       ethernet@400000 {
 569 +               compatible = "ralink,rt2880-eth";
 570 +               reg = <0x00400000 10000>;
 571 +
 572 +               interrupt-parent = <&cpuintc>;
 573 +               interrupts = <5>;
 574 +
 575 +               status = "disabled";
 576 +
 577 +               mdio-bus {
 578 +                       #address-cells = <1>;
 579 +                       #size-cells = <0>;
 580 +
 581 +                       status = "disabled";
 582 +               };
 583 +       };
 584  };
 585 diff --git a/arch/mips/ralink/dts/rt2880_eval.dts b/arch/mips/ralink/dts/rt2880_eval.dts
 586 index 322d700..58a1edf 100644
 587 --- a/arch/mips/ralink/dts/rt2880_eval.dts
 588 +++ b/arch/mips/ralink/dts/rt2880_eval.dts
 589 @@ -43,4 +43,10 @@
 590                         reg = <0x50000 0x3b0000>;
 591                 };
 592         };
 593 +
 594 +       ethernet@400000 {
 595 +               status = "okay";
 596 +
 597 +               ralink,fixed-link = <1000 1 1 1>;
 598 +       };
 599  };
 600 diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
 601 index ef7da1e..b1ac940 100644
 602 --- a/arch/mips/ralink/dts/rt3050.dtsi
 603 +++ b/arch/mips/ralink/dts/rt3050.dtsi
 604 @@ -1,7 +1,7 @@
 605  / {
 606         #address-cells = <1>;
 607         #size-cells = <1>;
 608 -       compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
 609 +       compatible = "ralink,rt3050-soc", "ralink,rt3052-soc";
 610
 611         cpus {
 612                 cpu@0 {
 613 @@ -45,6 +45,15 @@
 614                         reg = <0x300 0x100>;
 615                 };
 616
 617 +               i2c@900 {
 618 +                       compatible = "link,rt3052-i2c", "ralink,rt2880-i2c";
 619 +                       reg = <0x900 0x100>;
 620 +                       #address-cells = <1>;
 621 +                       #size-cells = <0>;
 622 +
 623 +                       status = "disabled";
 624 +               };
 625 +
 626                 uartlite@c00 {
 627                         compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
 628                         reg = <0xc00 0x100>;
 629 @@ -55,4 +64,24 @@
 630                         reg-shift = <2>;
 631                 };
 632         };
 633 +
 634 +       ethernet@10100000 {
 635 +               compatible = "ralink,rt3050-eth";
 636 +               reg = <0x10100000 10000>;
 637 +
 638 +               interrupt-parent = <&cpuintc>;
 639 +               interrupts = <5>;
 640 +
 641 +               status = "disabled";
 642 +       };
 643 +
 644 +       esw@10110000 {
 645 +               compatible = "ralink,rt3050-esw";
 646 +               reg = <0x10110000 8000>;
 647 +
 648 +               interrupt-parent = <&intc>;
 649 +               interrupts = <17>;
 650 +
 651 +               status = "disabled";
 652 +       };
 653  };
 654 diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
 655 index df17f5f..df02957 100644
 656 --- a/arch/mips/ralink/dts/rt3052_eval.dts
 657 +++ b/arch/mips/ralink/dts/rt3052_eval.dts
 658 @@ -3,7 +3,7 @@
 659  /include/ "rt3050.dtsi"
 660
 661  / {
 662 -       compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
 663 +       compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc", "ralink,rt5350-soc";
 664         model = "Ralink RT3052 evaluation board";
 665
 666         memory@0 {
 667 @@ -14,6 +14,14 @@
 668                 bootargs = "console=ttyS0,57600";
 669         };
 670
 671 +       palmbus@10000000 {
 672 +               sysc@0 {
 673 +                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
 674 +                       ralink,uartmux = "gpio";
 675 +                       ralink,wdtmux = <1>;
 676 +               };
 677 +       };
 678 +
 679         cfi@1f000000 {
 680                 compatible = "cfi-flash";
 681                 reg = <0x1f000000 0x800000>;
 682 @@ -43,4 +51,13 @@
 683                         reg = <0x50000 0x7b0000>;
 684                 };
 685         };
 686 +
 687 +       ethernet@10100000 {
 688 +               status = "okay";
 689 +       };
 690 +
 691 +       esw@10110000 {
 692 +               status = "okay";
 693 +               ralink,portmap = <0x2f>;
 694 +       };
 695  };
 696 diff --git a/arch/mips/ralink/dts/rt5350.dtsi b/arch/mips/ralink/dts/rt5350.dtsi
 697 new file mode 100644
 698 index 0000000..3d6b3bc
 699 --- /dev/null
 700 +++ b/arch/mips/ralink/dts/rt5350.dtsi
 701 @@ -0,0 +1,227 @@
 702 +/ {
 703 +       #address-cells = <1>;
 704 +       #size-cells = <1>;
 705 +       compatible = "ralink,rt5350-soc";
 706 +
 707 +       cpus {
 708 +               cpu@0 {
 709 +                       compatible = "mips,mips24KEc";
 710 +               };
 711 +       };
 712 +
 713 +       cpuintc: cpuintc@0 {
 714 +               #address-cells = <0>;
 715 +               #interrupt-cells = <1>;
 716 +               interrupt-controller;
 717 +               compatible = "mti,cpu-interrupt-controller";
 718 +       };
 719 +
 720 +       palmbus@10000000 {
 721 +               compatible = "palmbus";
 722 +               reg = <0x10000000 0x200000>;
 723 +               ranges = <0x0 0x10000000 0x1FFFFF>;
 724 +
 725 +               #address-cells = <1>;
 726 +               #size-cells = <1>;
 727 +
 728 +               sysc@0 {
 729 +                       compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc";
 730 +                       reg = <0x0 0x100>;
 731 +               };
 732 +
 733 +               timer@100 {
 734 +                       compatible = "ralink,rt5350-timer", "ralink,rt2880-timer";
 735 +                       reg = <0x100 0x20>;
 736 +
 737 +                       interrupt-parent = <&intc>;
 738 +                       interrupts = <1>;
 739 +               };
 740 +
 741 +               watchdog@120 {
 742 +                       compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt";
 743 +                       reg = <0x120 0x10>;
 744 +
 745 +                       resets = <&rstctrl 8>;
 746 +                       reset-names = "wdt";
 747 +
 748 +                       interrupt-parent = <&intc>;
 749 +                       interrupts = <1>;
 750 +               };
 751 +
 752 +               intc: intc@200 {
 753 +                       compatible = "ralink,rt5350-intc", "ralink,rt2880-intc";
 754 +                       reg = <0x200 0x100>;
 755 +
 756 +                       resets = <&rstctrl 19>;
 757 +                       reset-names = "intc";
 758 +
 759 +                       interrupt-controller;
 760 +                       #interrupt-cells = <1>;
 761 +
 762 +                       interrupt-parent = <&cpuintc>;
 763 +                       interrupts = <2>;
 764 +               };
 765 +
 766 +               memc@300 {
 767 +                       compatible = "ralink,rt5350-memc", "ralink,rt3050-memc";
 768 +                       reg = <0x300 0x100>;
 769 +
 770 +                       resets = <&rstctrl 20>;
 771 +                       reset-names = "mc";
 772 +
 773 +                       interrupt-parent = <&intc>;
 774 +                       interrupts = <3>;
 775 +               };
 776 +
 777 +               uart@500 {
 778 +                       compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
 779 +                       reg = <0x500 0x100>;
 780 +
 781 +                       resets = <&rstctrl 12>;
 782 +                       reset-names = "uart";
 783 +
 784 +                       interrupt-parent = <&intc>;
 785 +                       interrupts = <5>;
 786 +
 787 +                       reg-shift = <2>;
 788 +
 789 +                       status = "disabled";
 790 +               };
 791 +
 792 +               gpio0: gpio@600 {
 793 +                       compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
 794 +                       reg = <0x600 0x34>;
 795 +
 796 +                       resets = <&rstctrl 13>;
 797 +                       reset-names = "pio";
 798 +
 799 +                       interrupt-parent = <&intc>;
 800 +                       interrupts = <6>;
 801 +
 802 +                       gpio-controller;
 803 +                       #gpio-cells = <2>;
 804 +
 805 +                       ralink,gpio-base = <0>;
 806 +                       ralink,num-gpios = <24>;
 807 +                       ralink,register-map = [ 00 04 08 0c
 808 +                                               20 24 28 2c
 809 +                                               30 34 ];
 810 +
 811 +                       status = "disabled";
 812 +               };
 813 +
 814 +               gpio1: gpio@638 {
 815 +                       compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
 816 +                       reg = <0x638 0x24>;
 817 +
 818 +                       interrupt-parent = <&intc>;
 819 +                       interrupts = <6>;
 820 +
 821 +                       gpio-controller;
 822 +                       #gpio-cells = <2>;
 823 +
 824 +                       ralink,gpio-base = <24>;
 825 +                       ralink,num-gpios = <16>;
 826 +                       ralink,register-map = [ 00 04 08 0c
 827 +                                               10 14 18 1c
 828 +                                               20 24 ];
 829 +
 830 +                       status = "disabled";
 831 +               };
 832 +
 833 +               i2c@900 {
 834 +                       compatible = "link,rt5350-i2c", "ralink,rt2880-i2c";
 835 +                       reg = <0x900 0x100>;
 836 +
 837 +                       resets = <&rstctrl 16>;
 838 +                       reset-names = "i2c";
 839 +
 840 +                       #address-cells = <1>;
 841 +                       #size-cells = <0>;
 842 +
 843 +                       status = "disabled";
 844 +               };
 845 +
 846 +               spi@b00 {
 847 +                       compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
 848 +                       reg = <0xb00 0x100>;
 849 +
 850 +                       resets = <&rstctrl 18>;
 851 +                       reset-names = "spi";
 852 +
 853 +                       #address-cells = <1>;
 854 +                       #size-cells = <1>;
 855 +
 856 +                       status = "disabled";
 857 +               };
 858 +
 859 +               uartlite@c00 {
 860 +                       compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
 861 +                       reg = <0xc00 0x100>;
 862 +
 863 +                       resets = <&rstctrl 19>;
 864 +                       reset-names = "uartl";
 865 +
 866 +                       interrupt-parent = <&intc>;
 867 +                       interrupts = <12>;
 868 +
 869 +                       reg-shift = <2>;
 870 +               };
 871 +
 872 +               systick@d00 {
 873 +                       compatible = "ralink,rt5350-systick", "ralink,cevt-systick";
 874 +                       reg = <0xd00 0x10>;
 875 +
 876 +                       interrupt-parent = <&cpuintc>;
 877 +                       interrupts = <7>;
 878 +               };
 879 +       };
 880 +
 881 +       rstctrl: rstctrl {
 882 +               compatible = "ralink,rt5350-reset", "ralink,rt2880-reset";
 883 +               #reset-cells = <1>;
 884 +       };
 885 +
 886 +       ubsphy {
 887 +               compatible = "ralink,rt3xxx-usbphy";
 888 +
 889 +               resets = <&rstctrl 22 &rstctrl 25>;
 890 +               reset-names = "host", "device";
 891 +       };
 892 +
 893 +       ethernet@10100000 {
 894 +               compatible = "ralink,rt5350-eth";
 895 +               reg = <0x10100000 10000>;
 896 +
 897 +               interrupt-parent = <&cpuintc>;
 898 +               interrupts = <5>;
 899 +
 900 +               status = "disabled";
 901 +       };
 902 +
 903 +       esw@10110000 {
 904 +               compatible = "ralink,rt3050-esw";
 905 +               reg = <0x10110000 8000>;
 906 +
 907 +               interrupt-parent = <&intc>;
 908 +               interrupts = <17>;
 909 +
 910 +               status = "disabled";
 911 +       };
 912 +
 913 +       ehci@101c0000 {
 914 +               compatible = "ralink,rt3xxx-ehci";
 915 +               reg = <0x101c0000 0x1000>;
 916 +
 917 +               interrupt-parent = <&intc>;
 918 +               interrupts = <18>;
 919 +       };
 920 +
 921 +       ohci@101c1000 {
 922 +               compatible = "ralink,rt3xxx-ohci";
 923 +               reg = <0x101c1000 0x1000>;
 924 +
 925 +               interrupt-parent = <&intc>;
 926 +               interrupts = <18>;
 927 +       };
 928 +};
 929 diff --git a/arch/mips/ralink/dts/rt5350_eval.dts b/arch/mips/ralink/dts/rt5350_eval.dts
 930 new file mode 100644
 931 index 0000000..ab92043
 932 --- /dev/null
 933 +++ b/arch/mips/ralink/dts/rt5350_eval.dts
 934 @@ -0,0 +1,69 @@
 935 +/dts-v1/;
 936 +
 937 +/include/ "rt5350.dtsi"
 938 +
 939 +/ {
 940 +       compatible = "ralink,rt5350-eval-board", "ralink,rt5350-soc";
 941 +       model = "Ralink RT5350 evaluation board";
 942 +
 943 +       chosen {
 944 +               bootargs = "console=ttyS0,57600";
 945 +       };
 946 +
 947 +       palmbus@10000000 {
 948 +               sysc@0 {
 949 +                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
 950 +                       ralink,uartmux = "gpio";
 951 +                       ralink,wdtmux = <1>;
 952 +               };
 953 +
 954 +               gpio0: gpio@600 {
 955 +                       status = "okay";
 956 +               };
 957 +
 958 +               spi@b00 {
 959 +                       status = "okay";
 960 +
 961 +                       m25p80@0 {
 962 +                               #address-cells = <1>;
 963 +                               #size-cells = <1>;
 964 +                               compatible = "en25q64";
 965 +                               reg = <0 0>;
 966 +                               linux,modalias = "m25p80", "mx25l3205d";
 967 +                               spi-max-frequency = <10000000>;
 968 +
 969 +                               partition@0 {
 970 +                                       label = "u-boot";
 971 +                                       reg = <0x0 0x30000>;
 972 +                                       read-only;
 973 +                               };
 974 +
 975 +                               partition@30000 {
 976 +                                       label = "u-boot-env";
 977 +                                       reg = <0x30000 0x10000>;
 978 +                                       read-only;
 979 +                               };
 980 +
 981 +                               factory: partition@40000 {
 982 +                                       label = "factory";
 983 +                                       reg = <0x40000 0x10000>;
 984 +                                       read-only;
 985 +                               };
 986 +
 987 +                               partition@50000 {
 988 +                                       label = "firmware";
 989 +                                       reg = <0x50000 0x3b0000>;
 990 +                               };
 991 +                       };
 992 +               };
 993 +       };
 994 +
 995 +       ethernet@10100000 {
 996 +               status = "okay";
 997 +       };
 998 +
 999 +       esw@10110000 {
1000 +               status = "okay";
1001 +               ralink,portmap = <0x2f>;
1002 +       };
1003 +};
1004 --
1005 1.7.10.4
1006