target/linux/ramips/dts/RT-N15.dts

   1 /dts-v1/;
   2
   3 /include/ "rt2880.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "RT-N15", "ralink,rt2880-soc";
   9         model = "Asus RT-N15";
  10
  11         palmbus@300000 {
  12                 gpio0: gpio@600 {
  13                         status = "okay";
  14                 };
  15         };
  16
  17         pinctrl {
  18                 state_default: pinctrl0 {
  19                         gpio {
  20                                 ralink,group = "i2c", "uartlite", "mdio";
  21                                 ralink,function = "gpio";
  22                         };
  23                 };
  24         };
  25
  26         cfi@1f000000 {
  27                 compatible = "cfi-flash";
  28                 reg = <0x1f000000 0x800000>;
  29
  30                 bank-width = <2>;
  31                 device-width = <2>;
  32                 #address-cells = <1>;
  33                 #size-cells = <1>;
  34
  35                 partition@0 {
  36                         label = "uboot";
  37                         reg = <0x0 0x30000>;
  38                         read-only;
  39                 };
  40                 partition@30000 {
  41                         label = "uboot-env";
  42                         reg = <0x30000 0x10000>;
  43                         read-only;
  44                 };
  45                 factory: partition@40000 {
  46                         label = "factory";
  47                         reg = <0x40000 0x10000>;
  48                         read-only;
  49                 };
  50                 partition@50000 {
  51                         label = "firmware";
  52                         reg = <0x50000 0x3b0000>;
  53                 };
  54         };
  55
  56         ethernet@400000 {
  57                 status = "okay";
  58                 mtd-mac-address = <&factory 0x4>;
  59
  60                 port@0 {
  61                         ralink,fixed-link = <1000 1 1 1>;
  62                 };
  63
  64                 mdio-bus {
  65                         status = "okay";
  66                         phy0: ethernet-phy@0 {
  67                                 phy-mode = "mii";
  68                                 reg = <0>;
  69                         };
  70                 };
  71         };
  72
  73         rtl8366s {
  74                 compatible = "realtek,rtl8366s";
  75                 gpio-sda = <&gpio0 1 0>;
  76                 gpio-sck = <&gpio0 2 0>;
  77         };
  78
  79         gpio-keys-polled {
  80                 compatible = "gpio-keys-polled";
  81                 #address-cells = <1>;
  82                 #size-cells = <0>;
  83                 poll-interval = <100>;
  84                 wps {
  85                         label = "wps";
  86                         gpios = <&gpio0 0 0>;
  87                         linux,code = <0x211>;
  88                 };
  89                 reset {
  90                         label = "reset";
  91                         gpios = <&gpio0 12 0>;
  92                         linux,code = <0x198>;
  93                 };
  94         };
  95
  96         gpio-leds {
  97                 compatible = "gpio-leds";
  98
  99                 power {
 100                         label = "rt-n15:blue:power";
 101                         gpios = <&gpio0 11 1>;
 102                 };
 103         };
 104 };