target/linux/lantiq/dts/P2601HNFX.dts

   1 /dts-v1/;
   2
   3 /include/ "ar9.dtsi"
   4
   5 / {
   6         model = "P2601HNFX - ZyXEL P-2601HN-Fx";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         dsl = &dsl;
  13                         internet = &online;
  14                         power = &power;
  15                         power2 = &power2;
  16                         wifi = &wifi;
  17                 };
  18         };
  19
  20         memory@0 {
  21                 reg = <0x0 0x4000000>;
  22         };
  23
  24         fpi@10000000 {
  25                 #address-cells = <1>;
  26                 #size-cells = <1>;
  27                 localbus@0 {
  28                         #address-cells = <2>;
  29                         #size-cells = <1>;
  30                         ranges = <0 0 0x0 0x3ffffff
  31                                   1 0 0x4000000 0x4000010>;
  32                         compatible = "lantiq,localbus", "simple-bus";
  33
  34                         nor-boot@0 {
  35                                 compatible = "lantiq,nor";
  36                                 bank-width = <2>;
  37                                 reg = <0 0x0 0x2000000>;
  38                                 #address-cells = <1>;
  39                                 #size-cells = <1>;
  40
  41                                 partition@0 {
  42                                         label = "uboot";
  43                                         reg = <0x00000 0x40000>;
  44                                         read-only;
  45                                 };
  46
  47                                 partition@40000 {
  48                                         label = "uboot_env";
  49                                         reg = <0x40000 0x20000>;
  50                                         read-only;
  51                                 };
  52
  53                                 partition@60000 {
  54                                         label = "firmware";
  55                                         reg = <0x60000 0xfa0000>;
  56                                 };
  57                         };
  58                 };
  59
  60                 gpio: pinmux@E100B10 {
  61                         compatible = "lantiq,pinctrl-xr9";
  62                         pinctrl-names = "default";
  63                         pinctrl-0 = <&state_default>;
  64
  65                         #gpio-cells = <2>;
  66                         gpio-controller;
  67                         reg = <0xE100B10 0xA0>;
  68
  69                         state_default: pinmux {
  70                                 stp {
  71                                         lantiq,groups = "stp";
  72                                         lantiq,function = "stp";
  73                                         lantiq,pull = <2>;
  74                                         lantiq,open-drain = <0>;
  75                                         lantiq,output = <1>;
  76                                 };
  77                                 exin {
  78                                         lantiq,groups = "exin1";
  79                                         lantiq,function = "exin";
  80                                 };
  81                                 pci {
  82                                         lantiq,groups = "gnt1";
  83                                         lantiq,function = "pci";
  84                                 };
  85                                 conf_out {
  86                                         lantiq,pins = "io4", "io5", "io6";
  87                                         lantiq,open-drain;
  88                                         lantiq,pull = <0>;
  89                                 };
  90                                 mdio {
  91                                         lantiq,groups = "mdio";
  92                                         lantiq,function = "mdio";
  93                                 };
  94                         };
  95                 };
  96
  97                 etop@E180000 {
  98                         phy-mode = "rmii";
  99                 };
 100
 101                 ifxhcd@E101000 {
 102                         status = "okay";
 103                         gpios = <&gpio 9 0>;
 104                 };
 105
 106                 stp: stp@E100BB0 {
 107                         #gpio-cells = <2>;
 108                         compatible = "lantiq,gpio-stp-xway";
 109                         gpio-controller;
 110                         reg = <0xE100BB0 0x40>;
 111
 112                         lantiq,shadow = <0xfff>;
 113                         lantiq,groups = <0x3>;
 114                 };
 115
 116                 pci@E105400 {
 117                         lantiq,bus-clock = <33333333>;
 118                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 119                         interrupt-map = <0x7000 0 0 1 &icu0 29 1>;
 120                         gpios-reset = <&gpio 21 0>;
 121                         req-mask = <0x1>;
 122                 };
 123         };
 124
 125         gpio-keys-polled {
 126                 compatible = "gpio-keys-polled";
 127                 #address-cells = <1>;
 128                 #size-cells = <0>;
 129                 poll-interval = <100>;
 130
 131                 reset {
 132                         label = "reset";
 133                         gpios = <&gpio 53 1>;
 134                         linux,code = <0x198>;
 135                 };
 136                 rfkill {
 137                         label = "rfkill";
 138                         gpios = <&gpio 54 1>;
 139                         linux,code = <0xf7>;
 140                 };
 141         };
 142
 143         gpio-leds {
 144                 compatible = "gpio-leds";
 145
 146                 power: power {
 147                         label = "power";
 148                         gpios = <&stp 11 1>;
 149                         default-state = "on";
 150                 };
 151                 power2: power2 {
 152                         label = "power2";
 153                         gpios = <&gpio 29 1>;
 154                 };
 155                 online: online {
 156                         label = "online";
 157                         gpios = <&stp 13 1>;
 158                 };
 159                 online2 {
 160                         label = "online2";
 161                         gpios = <&stp 12 1>;
 162                 };
 163                 dsl: dsl {
 164                         label = "dsl";
 165                         gpios = <&stp 14 1>;
 166                 };
 167                 phone {
 168                         label = "phone";
 169                         gpios = <&stp 9 1>;
 170                 };
 171                 phone2 {
 172                         label = "phone2";
 173                         gpios = <&stp 8 1>;
 174                 };
 175                 wifi: wifi {
 176                         label = "wifi";
 177                         gpios = <&stp 15 1>;
 178                 };
 179                 wifi2 {
 180                         label = "wifi2";
 181                         gpios = <&stp 10 1>;
 182                 };
 183         };
 184
 185         gpio_export {
 186                 compatible = "gpio-export";
 187                 #size-cells = <0>;
 188
 189                 switch {
 190                         gpio-export,name = "switch";
 191                         gpio-export,output = <1>;
 192                         gpios = <&gpio 50 0>;
 193                 };
 194                 usb {
 195                         gpio-export,name = "wifi";
 196                         gpio-export,output = <1>;
 197                         gpios = <&gpio 9 0>;
 198                 };
 199         };
 200 };