lantiq: use default leds defined in DTS

Remove all now double defined leds from the led board file. Use pppoe
as default for all broadband connections, since it's the default in
OpenWrt now.

Rename the the wifi leds to make sure, the not applicable default
values get overwritten.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48038 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/lantiq/base-files/etc/board.d/01_leds b/target/linux/lantiq/base-files/etc/board.d/01_leds
index 9d57cf3..7a25b6d 100755 (executable)
--- a/target/linux/lantiq/base-files/etc/board.d/01_leds
+++ b/target/linux/lantiq/base-files/etc/board.d/01_leds
@@ -9,10 +9,10 @@
 
 board_config_update
 
-[ -e "/sys/class/leds/wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "wifi" "phy0tpt"
-[ -e "/sys/class/leds/usb" ] && ucidef_set_led_usbdev "usb" "usb" "usb" "1-1"
-[ -e "/sys/class/leds/usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "usb2" "2-1"
-[ -e "/sys/class/leds/internet" ] && ucidef_set_led_netdev "internet" "internet" "internet" "pppoe-wan"
+[ -n "$(lantiq_is_dt_led_chosen wifi)" ] && ucidef_set_led_wlan "wifi" "wifi" "$(lantiq_get_dt_led_chosen wifi)" "phy0tpt"
+[ -n "$(lantiq_is_dt_led_chosen usb)" ] && ucidef_set_led_usbdev "usb" "usb" "$(lantiq_get_dt_led_chosen usb)" "1-1"
+[ -n "$(lantiq_is_dt_led_chosen usb2)" ] && ucidef_set_led_usbdev "usb2" "usb2" "$(lantiq_get_dt_led_chosen usb2)" "2-1"
+[ -n "$(lantiq_is_dt_led_chosen internet)" ] && ucidef_set_led_netdev "internet" "internet" "$(lantiq_get_dt_led_chosen internet)" "pppoe-wan"
 
 board=$(lantiq_board_name)
 
@@ -22,19 +22,12 @@ VG3503J)
        ;;
 BTHOMEHUBV2B)
        ucidef_set_led_default "power" "power" "soc:blue:power" "1"
-#      ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0radio"
-       ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt"
-       ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
        ;;
 BTHOMEHUBV3A)
        ucidef_set_led_default "power" "power" "soc:blue:power" "1"
-       ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt"
-       ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
        ;;
 BTHOMEHUBV5A)
        ucidef_set_led_default "power" "power" "soc:blue:power" "1"
-       ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt"
-       ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
        ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
        ;;
 VGV7510KW22)
@@ -42,33 +35,27 @@ VGV7510KW22)
        ucidef_set_led_default "power2" "power2" "power2" "0"
        ucidef_set_led_wlan "wifi" "wifi" "wifi" "phy0radio"
        ucidef_set_led_netdev "dsl" "dsl" "dsl" "nas0"
-       ucidef_set_led_netdev "internet_green" "internet_green" "internet_green" "pppoe-wan"
        ;;
 VGV7519)
        ucidef_set_led_default "power" "power" "power" "0"
        ucidef_set_led_default "power2" "power2" "power2" "1"
-       ucidef_set_led_wlan "wireless_yellow" "wireless_yellow" "wireless_yellow" "phy0radio"
-       ucidef_set_led_netdev "internet_yellow" "internet_yellow" "internet_yellow" "nas0"
-       ucidef_set_led_netdev "broadband_yellow" "broadband_yellow" "broadband_yellow" "pppoe-wan"
+       ucidef_set_led_wlan "wifi" "wifi" "wireless_yellow" "phy0radio"
+       ucidef_set_led_netdev "broadband_yellow" "broadband_yellow" "broadband_yellow" "nas0"
        ;;
 P2812HNUF*)
        ucidef_set_led_default "power" "power" "power" "0"
        ucidef_set_led_default "power2" "power2" "power2" "1"
-       ucidef_set_led_wlan "wireless_green" "wireless_green" "wireless_green" "phy0radio"
+       ucidef_set_led_wlan "wifi" "wifi" "wireless_green" "phy0radio"
        ucidef_set_led_netdev "dsl" "dsl" "dsl" "nas0"
-       ucidef_set_led_netdev "internet_green" "internet_green" "internet_green" "pppoe-wan"
        ;;
 ARV7519RW22)
        ucidef_set_led_default "power" "power" "power" "1"
-       ucidef_set_led_netdev "internet_green" "internet_green" "internet_green" "pppoe-wan"
        ucidef_set_led_netdev "lan" "lan" "lan" "eth0.1"
        ;;
 ARV8539PW22)
         ucidef_set_led_default "power" "power" "soc:green:power" "1"
         ucidef_set_led_default "power2" "power2" "soc:red:power" "0"
-        ucidef_set_led_wlan "wifi" "wifi" "soc:green:wireless" "phy0tpt"
         ucidef_set_led_netdev "dsl" "dsl" "soc:green:dsl" "nas0"
-        ucidef_set_led_netdev "online" "online" "soc:green:online" "pppoe-wan"
         ;;
 *)
        ;;

diff --git a/target/linux/lantiq/base-files/lib/functions/lantiq.sh b/target/linux/lantiq/base-files/lib/functions/lantiq.sh
index 88da794..642ae6b 100644 (file)
--- a/target/linux/lantiq/base-files/lib/functions/lantiq.sh
+++ b/target/linux/lantiq/base-files/lib/functions/lantiq.sh
@@ -27,3 +27,19 @@ lantiq_board_name() {
 
        echo "$name"
 }
+
+lantiq_is_dt_led_chosen() {
+       [ -f "/sys/firmware/devicetree/base/chosen/leds/$1" ] && echo "true"
+}
+
+lantiq_get_dt_led_chosen() {
+       local label
+       local nodepath
+       local basepath="/sys/firmware/devicetree/base"
+       local chosenpath="$basepath/chosen/leds/$1"
+
+       [ -f "$chosenpath" ] && nodepath=$(cat "$chosenpath")
+       [ -n "$nodepath" ] && label=$(cat "$basepath$nodepath/label")
+
+       echo "$label"
+}