target/linux/lantiq/dts/ARV7525PW.dts

   1 /dts-v1/;
   2
   3 /include/ "danube.dtsi"
   4
   5 / {
   6         model = "ARV7525PW - Speedport W303V Typ A";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         dsl = &power;
  13                         internet = &online;
  14                         power = &power;
  15                         power1 = &power1;
  16                         wifi = &wifi;
  17                 };
  18         };
  19
  20         memory@0 {
  21                 reg = <0x0 0x2000000>;
  22         };
  23
  24         sram@1F000000 {
  25                 vmmc@107000 {
  26                         status = "okay";
  27                         gpios = <&gpio 31 0>;
  28                 };
  29         };
  30
  31         fpi@10000000 {
  32                 localbus@0 {
  33                         nor-boot@0 {
  34                                 compatible = "lantiq,nor";
  35                                 bank-width = <2>;
  36                                 reg = <0 0x0 0x2000000>;
  37                                 #address-cells = <1>;
  38                                 #size-cells = <1>;
  39
  40                                 partition@0 {
  41                                         label = "uboot";
  42                                         reg = <0x00000 0x10000>;
  43                                         read-only;
  44                                 };
  45
  46                                 partition@10000 {
  47                                         label = "uboot_env";
  48                                         reg = <0x10000 0x10000>;
  49                                         read-only;
  50                                 };
  51
  52                                 partition@20000 {
  53                                         label = "firmware";
  54                                         reg = <0x20000 0x3d0000>;
  55                                 };
  56
  57                                 partition@400000 {
  58                                         label = "board_config";
  59                                         reg = <0x3f0000 0x10000>;
  60                                         read-only;
  61                                 };
  62                         };
  63
  64                         mac_addr {
  65                                 compatible = "lantiq,eth-mac";
  66                                 reg = <0 0x3f0016 0x6>;
  67                                 mac-increment = <2>;
  68                         };
  69
  70                         ralink_eep {
  71                                 compatible = "ralink,eeprom";
  72                                 ralink,eeprom = "RT2860.eeprom";
  73                                 reg = <0 0x3f0410 0x110>;
  74                         };
  75                 };
  76
  77                 gpio: pinmux@E100B10 {
  78                         pinctrl-names = "default";
  79                         pinctrl-0 = <&state_default>;
  80
  81                         state_default: pinmux {
  82                                 exin {
  83                                         lantiq,groups = "exin1";
  84                                         lantiq,function = "exin";
  85                                 };
  86                                 pci {
  87                                         lantiq,groups = "gnt1", "req1";
  88                                         lantiq,function = "pci";
  89                                 };
  90                         };
  91                 };
  92
  93                 etop@E180000 {
  94                         phy-mode = "mii";
  95                 };
  96
  97                 pci@E105400 {
  98                         status = "okay";
  99                         interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
 100                         req-mask = <0x1>;
 101                 };
 102
 103         };
 104
 105         gpio-keys-polled {
 106                 compatible = "gpio-keys-polled";
 107                 #address-cells = <1>;
 108                 #size-cells = <0>;
 109                 poll-interval = <100>;
 110
 111                 wps {
 112                         label = "wps";
 113                         gpios = <&gpio 29 1>;
 114                         linux,code = <0x211>;
 115                 };
 116                 reset {
 117                         label = "reset";
 118                         gpios = <&gpio 30 1>;
 119                         linux,code = <0x198>;
 120                 };
 121         };
 122
 123         gpio-leds {
 124                 compatible = "gpio-leds";
 125                 power: power {
 126                         label = "power";
 127                         gpios = <&gpio 3 1>;
 128                 };
 129                 power1: power1 {
 130                         label = "power1";
 131                         gpios = <&gpio 4 1>;
 132                 };
 133                 online: online {
 134                         label = "online";
 135                         gpios = <&gpio 5 1>;
 136                 };
 137                 voice {
 138                         label = "voice";
 139                         gpios = <&gpio 6 1>;
 140                 };
 141                 voice2 {
 142                         label = "voice2";
 143                         gpios = <&gpio 8 1>;
 144                 };
 145                 wifi: wifi {
 146                         label = "wifi";
 147                         gpios = <&gpio 9 1>;
 148                 };
 149         };
 150 };