ar8216: use vlan configuration for connecting ports (forced to be untagged) even...
[openwrt.git] / target / linux / generic / files / drivers / net / phy / ar8216.c
1 /*
2  * ar8216.c: AR8216 switch driver
3  *
4  * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * as published by the Free Software Foundation; either version 2
9  * of the License, or (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  */
16
17 #include <linux/if.h>
18 #include <linux/module.h>
19 #include <linux/init.h>
20 #include <linux/list.h>
21 #include <linux/if_ether.h>
22 #include <linux/skbuff.h>
23 #include <linux/netdevice.h>
24 #include <linux/netlink.h>
25 #include <linux/bitops.h>
26 #include <net/genetlink.h>
27 #include <linux/switch.h>
28 #include <linux/delay.h>
29 #include <linux/phy.h>
30 #include <linux/netdevice.h>
31 #include <linux/etherdevice.h>
32 #include "ar8216.h"
33
34 /* size of the vlan table */
35 #define AR8X16_MAX_VLANS        128
36 #define AR8X16_PROBE_RETRIES    10
37
38 struct ar8216_priv {
39         struct switch_dev dev;
40         struct phy_device *phy;
41         u32 (*read)(struct ar8216_priv *priv, int reg);
42         void (*write)(struct ar8216_priv *priv, int reg, u32 val);
43         const struct net_device_ops *ndo_old;
44         struct net_device_ops ndo;
45         struct mutex reg_mutex;
46         int chip;
47         bool initialized;
48         bool port4_phy;
49         char buf[80];
50
51         bool init;
52
53         /* all fields below are cleared on reset */
54         bool vlan;
55         u16 vlan_id[AR8X16_MAX_VLANS];
56         u8 vlan_table[AR8X16_MAX_VLANS];
57         u8 vlan_tagged;
58         u16 pvid[AR8216_NUM_PORTS];
59 };
60
61 #define to_ar8216(_dev) container_of(_dev, struct ar8216_priv, dev)
62
63 static inline void
64 split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
65 {
66         regaddr >>= 1;
67         *r1 = regaddr & 0x1e;
68
69         regaddr >>= 5;
70         *r2 = regaddr & 0x7;
71
72         regaddr >>= 3;
73         *page = regaddr & 0x1ff;
74 }
75
76 static u32
77 ar8216_mii_read(struct ar8216_priv *priv, int reg)
78 {
79         struct phy_device *phy = priv->phy;
80         u16 r1, r2, page;
81         u16 lo, hi;
82
83         split_addr((u32) reg, &r1, &r2, &page);
84         mdiobus_write(phy->bus, 0x18, 0, page);
85         msleep(1); /* wait for the page switch to propagate */
86         lo = mdiobus_read(phy->bus, 0x10 | r2, r1);
87         hi = mdiobus_read(phy->bus, 0x10 | r2, r1 + 1);
88
89         return (hi << 16) | lo;
90 }
91
92 static void
93 ar8216_mii_write(struct ar8216_priv *priv, int reg, u32 val)
94 {
95         struct phy_device *phy = priv->phy;
96         u16 r1, r2, r3;
97         u16 lo, hi;
98
99         split_addr((u32) reg, &r1, &r2, &r3);
100         mdiobus_write(phy->bus, 0x18, 0, r3);
101         msleep(1); /* wait for the page switch to propagate */
102
103         lo = val & 0xffff;
104         hi = (u16) (val >> 16);
105         mdiobus_write(phy->bus, 0x10 | r2, r1 + 1, hi);
106         mdiobus_write(phy->bus, 0x10 | r2, r1, lo);
107 }
108
109 static u32
110 ar8216_rmw(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
111 {
112         u32 v;
113
114         v = priv->read(priv, reg);
115         v &= ~mask;
116         v |= val;
117         priv->write(priv, reg, v);
118
119         return v;
120 }
121
122 static inline int
123 ar8216_id_chip(struct ar8216_priv *priv)
124 {
125         u32 val;
126         u16 id;
127         int i;
128
129         val = ar8216_mii_read(priv, AR8216_REG_CTRL);
130         if (val == ~0)
131                 return UNKNOWN;
132
133         id = val & (AR8216_CTRL_REVISION | AR8216_CTRL_VERSION);
134         for (i = 0; i < AR8X16_PROBE_RETRIES; i++) {
135                 u16 t;
136
137                 val = ar8216_mii_read(priv, AR8216_REG_CTRL);
138                 if (val == ~0)
139                         return UNKNOWN;
140
141                 t = val & (AR8216_CTRL_REVISION | AR8216_CTRL_VERSION);
142                 if (t != id)
143                         return UNKNOWN;
144         }
145
146         switch (id) {
147         case 0x0101:
148                 return AR8216;
149         case 0x0301:
150                 return AR8236;
151         case 0x1000:
152         case 0x1001:
153                 return AR8316;
154         default:
155                 printk(KERN_DEBUG
156                         "ar8216: Unknown Atheros device [ver=%d, rev=%d, phy_id=%04x%04x]\n",
157                         (int)(id >> AR8216_CTRL_VERSION_S),
158                         (int)(id & AR8216_CTRL_REVISION),
159                         mdiobus_read(priv->phy->bus, priv->phy->addr, 2),
160                         mdiobus_read(priv->phy->bus, priv->phy->addr, 3));
161
162                 return UNKNOWN;
163         }
164 }
165
166 static int
167 ar8216_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
168                 struct switch_val *val)
169 {
170         struct ar8216_priv *priv = to_ar8216(dev);
171         priv->vlan = !!val->value.i;
172         return 0;
173 }
174
175 static int
176 ar8216_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
177                 struct switch_val *val)
178 {
179         struct ar8216_priv *priv = to_ar8216(dev);
180         val->value.i = priv->vlan;
181         return 0;
182 }
183
184
185 static int
186 ar8216_set_pvid(struct switch_dev *dev, int port, int vlan)
187 {
188         struct ar8216_priv *priv = to_ar8216(dev);
189
190         /* make sure no invalid PVIDs get set */
191
192         if (vlan >= dev->vlans)
193                 return -EINVAL;
194
195         priv->pvid[port] = vlan;
196         return 0;
197 }
198
199 static int
200 ar8216_get_pvid(struct switch_dev *dev, int port, int *vlan)
201 {
202         struct ar8216_priv *priv = to_ar8216(dev);
203         *vlan = priv->pvid[port];
204         return 0;
205 }
206
207 static int
208 ar8216_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
209                 struct switch_val *val)
210 {
211         struct ar8216_priv *priv = to_ar8216(dev);
212         priv->vlan_id[val->port_vlan] = val->value.i;
213         return 0;
214 }
215
216 static int
217 ar8216_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
218                 struct switch_val *val)
219 {
220         struct ar8216_priv *priv = to_ar8216(dev);
221         val->value.i = priv->vlan_id[val->port_vlan];
222         return 0;
223 }
224
225 static const char *ar8216_speed_str(unsigned speed)
226 {
227         switch (speed) {
228         case AR8216_PORT_SPEED_10M:
229                 return "10baseT";
230         case AR8216_PORT_SPEED_100M:
231                 return "100baseT";
232         case AR8216_PORT_SPEED_1000M:
233                 return "1000baseT";
234         }
235
236         return "unknown";
237 }
238
239 static int ar8216_port_get_link(struct switch_dev *dev,
240                                 const struct switch_attr *attr,
241                                 struct switch_val *val)
242 {
243         struct ar8216_priv *priv = to_ar8216(dev);
244         u32 len;
245         u32 status;
246         int port;
247
248         port = val->port_vlan;
249
250         memset(priv->buf, '\0', sizeof(priv->buf));
251         status = priv->read(priv, AR8216_REG_PORT_STATUS(port));
252
253         if (status & AR8216_PORT_STATUS_LINK_UP) {
254                 len = snprintf(priv->buf, sizeof(priv->buf),
255                                 "port:%d link:up speed:%s %s-duplex %s%s%s",
256                                 port,
257                                 ar8216_speed_str((status &
258                                                   AR8216_PORT_STATUS_SPEED) >>
259                                                  AR8216_PORT_STATUS_SPEED_S),
260                                 (status & AR8216_PORT_STATUS_DUPLEX) ?
261                                         "full" : "half",
262                                 (status & AR8216_PORT_STATUS_TXFLOW) ?
263                                         "txflow ": "",
264                                 (status & AR8216_PORT_STATUS_RXFLOW) ?
265                                         "rxflow " : "",
266                                 (status & AR8216_PORT_STATUS_LINK_AUTO) ?
267                                         "auto ": "");
268         } else {
269                 len = snprintf(priv->buf, sizeof(priv->buf), "port:%d link:down",
270                                 port);
271         }
272
273         val->value.s = priv->buf;
274         val->len = len;
275
276         return 0;
277 }
278
279 static int
280 ar8216_mangle_tx(struct sk_buff *skb, struct net_device *dev)
281 {
282         struct ar8216_priv *priv = dev->phy_ptr;
283         unsigned char *buf;
284
285     if (unlikely(!priv))
286         goto error;
287
288         if (!priv->vlan)
289                 goto send;
290
291         if (unlikely(skb_headroom(skb) < 2)) {
292                 if (pskb_expand_head(skb, 2, 0, GFP_ATOMIC) < 0)
293                         goto error;
294         }
295
296         buf = skb_push(skb, 2);
297         buf[0] = 0x10;
298         buf[1] = 0x80;
299
300 send:
301         return priv->ndo_old->ndo_start_xmit(skb, dev);
302
303 error:
304         dev_kfree_skb_any(skb);
305         return 0;
306 }
307
308 static int
309 ar8216_mangle_rx(struct sk_buff *skb, int napi)
310 {
311         struct ar8216_priv *priv;
312         struct net_device *dev;
313         unsigned char *buf;
314         int port, vlan;
315
316         dev = skb->dev;
317         if (!dev)
318                 goto error;
319
320         priv = dev->phy_ptr;
321         if (!priv)
322                 goto error;
323
324         /* don't strip the header if vlan mode is disabled */
325         if (!priv->vlan)
326                 goto recv;
327
328         /* strip header, get vlan id */
329         buf = skb->data;
330         skb_pull(skb, 2);
331
332         /* check for vlan header presence */
333         if ((buf[12 + 2] != 0x81) || (buf[13 + 2] != 0x00))
334                 goto recv;
335
336         port = buf[0] & 0xf;
337
338         /* no need to fix up packets coming from a tagged source */
339         if (priv->vlan_tagged & (1 << port))
340                 goto recv;
341
342         /* lookup port vid from local table, the switch passes an invalid vlan id */
343         vlan = priv->vlan_id[priv->pvid[port]];
344
345         buf[14 + 2] &= 0xf0;
346         buf[14 + 2] |= vlan >> 8;
347         buf[15 + 2] = vlan & 0xff;
348
349 recv:
350         skb->protocol = eth_type_trans(skb, skb->dev);
351
352         if (napi)
353                 return netif_receive_skb(skb);
354         else
355                 return netif_rx(skb);
356
357 error:
358         /* no vlan? eat the packet! */
359         dev_kfree_skb_any(skb);
360         return NET_RX_DROP;
361 }
362
363 static int
364 ar8216_netif_rx(struct sk_buff *skb)
365 {
366         return ar8216_mangle_rx(skb, 0);
367 }
368
369 static int
370 ar8216_netif_receive_skb(struct sk_buff *skb)
371 {
372         return ar8216_mangle_rx(skb, 1);
373 }
374
375
376 static struct switch_attr ar8216_globals[] = {
377         {
378                 .type = SWITCH_TYPE_INT,
379                 .name = "enable_vlan",
380                 .description = "Enable VLAN mode",
381                 .set = ar8216_set_vlan,
382                 .get = ar8216_get_vlan,
383                 .max = 1
384         },
385 };
386
387 static struct switch_attr ar8216_port[] = {
388         {
389                 .type = SWITCH_TYPE_STRING,
390                 .name = "link",
391                 .description = "Get port link information",
392                 .max = 1,
393                 .set = NULL,
394                 .get = ar8216_port_get_link,
395         },
396 };
397
398 static struct switch_attr ar8216_vlan[] = {
399         {
400                 .type = SWITCH_TYPE_INT,
401                 .name = "vid",
402                 .description = "VLAN ID (0-4094)",
403                 .set = ar8216_set_vid,
404                 .get = ar8216_get_vid,
405                 .max = 4094,
406         },
407 };
408
409
410 static int
411 ar8216_get_ports(struct switch_dev *dev, struct switch_val *val)
412 {
413         struct ar8216_priv *priv = to_ar8216(dev);
414         u8 ports = priv->vlan_table[val->port_vlan];
415         int i;
416
417         val->len = 0;
418         for (i = 0; i < AR8216_NUM_PORTS; i++) {
419                 struct switch_port *p;
420
421                 if (!(ports & (1 << i)))
422                         continue;
423
424                 p = &val->value.ports[val->len++];
425                 p->id = i;
426                 if (priv->vlan_tagged & (1 << i))
427                         p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
428                 else
429                         p->flags = 0;
430         }
431         return 0;
432 }
433
434 static int
435 ar8216_set_ports(struct switch_dev *dev, struct switch_val *val)
436 {
437         struct ar8216_priv *priv = to_ar8216(dev);
438         u8 *vt = &priv->vlan_table[val->port_vlan];
439         int i, j;
440
441         *vt = 0;
442         for (i = 0; i < val->len; i++) {
443                 struct switch_port *p = &val->value.ports[i];
444
445                 if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
446                         priv->vlan_tagged |= (1 << p->id);
447                 else {
448                         priv->vlan_tagged &= ~(1 << p->id);
449                         priv->pvid[p->id] = val->port_vlan;
450
451                         /* make sure that an untagged port does not
452                          * appear in other vlans */
453                         for (j = 0; j < AR8X16_MAX_VLANS; j++) {
454                                 if (j == val->port_vlan)
455                                         continue;
456                                 priv->vlan_table[j] &= ~(1 << p->id);
457                         }
458                 }
459
460                 *vt |= 1 << p->id;
461         }
462         return 0;
463 }
464
465 static int
466 ar8216_wait_bit(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
467 {
468         int timeout = 20;
469
470         while ((priv->read(priv, reg) & mask) != val) {
471                 if (timeout-- <= 0) {
472                         printk(KERN_ERR "ar8216: timeout waiting for operation to complete\n");
473                         return 1;
474                 }
475         }
476         return 0;
477 }
478
479 static void
480 ar8216_vtu_op(struct ar8216_priv *priv, u32 op, u32 val)
481 {
482         if (ar8216_wait_bit(priv, AR8216_REG_VTU, AR8216_VTU_ACTIVE, 0))
483                 return;
484         if ((op & AR8216_VTU_OP) == AR8216_VTU_OP_LOAD) {
485                 val &= AR8216_VTUDATA_MEMBER;
486                 val |= AR8216_VTUDATA_VALID;
487                 priv->write(priv, AR8216_REG_VTU_DATA, val);
488         }
489         op |= AR8216_VTU_ACTIVE;
490         priv->write(priv, AR8216_REG_VTU, op);
491 }
492
493 static void
494 ar8216_setup_port(struct ar8216_priv *priv, int port, u32 egress, u32 ingress,
495                   u32 members, u32 pvid)
496 {
497         u32 header;
498
499         if (priv->vlan && port == AR8216_PORT_CPU && priv->chip == AR8216)
500                 header = AR8216_PORT_CTRL_HEADER;
501         else
502                 header = 0;
503
504         ar8216_rmw(priv, AR8216_REG_PORT_CTRL(port),
505                    AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
506                    AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
507                    AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
508                    AR8216_PORT_CTRL_LEARN | header |
509                    (egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
510                    (AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
511
512         ar8216_rmw(priv, AR8216_REG_PORT_VLAN(port),
513                    AR8216_PORT_VLAN_DEST_PORTS | AR8216_PORT_VLAN_MODE |
514                    AR8216_PORT_VLAN_DEFAULT_ID,
515                    (members << AR8216_PORT_VLAN_DEST_PORTS_S) |
516                    (ingress << AR8216_PORT_VLAN_MODE_S) |
517                    (pvid << AR8216_PORT_VLAN_DEFAULT_ID_S));
518 }
519
520 static void
521 ar8236_setup_port(struct ar8216_priv *priv, int port, u32 egress, u32 ingress,
522                   u32 members, u32 pvid)
523 {
524         ar8216_rmw(priv, AR8216_REG_PORT_CTRL(port),
525                    AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
526                    AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
527                    AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
528                    AR8216_PORT_CTRL_LEARN |
529                    (egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
530                    (AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
531
532         ar8216_rmw(priv, AR8236_REG_PORT_VLAN(port),
533                    AR8236_PORT_VLAN_DEFAULT_ID,
534                    (pvid << AR8236_PORT_VLAN_DEFAULT_ID_S));
535
536         ar8216_rmw(priv, AR8236_REG_PORT_VLAN2(port),
537                    AR8236_PORT_VLAN2_VLAN_MODE |
538                    AR8236_PORT_VLAN2_MEMBER,
539                    (ingress << AR8236_PORT_VLAN2_VLAN_MODE_S) |
540                    (members << AR8236_PORT_VLAN2_MEMBER_S));
541 }
542
543 static int
544 ar8216_hw_apply(struct switch_dev *dev)
545 {
546         struct ar8216_priv *priv = to_ar8216(dev);
547         u8 portmask[AR8216_NUM_PORTS];
548         int i, j;
549
550         mutex_lock(&priv->reg_mutex);
551         /* flush all vlan translation unit entries */
552         ar8216_vtu_op(priv, AR8216_VTU_OP_FLUSH, 0);
553
554         memset(portmask, 0, sizeof(portmask));
555         if (!priv->init) {
556                 /* calculate the port destination masks and load vlans
557                  * into the vlan translation unit */
558                 for (j = 0; j < AR8X16_MAX_VLANS; j++) {
559                         u8 vp = priv->vlan_table[j];
560
561                         if (!vp)
562                                 continue;
563
564                         for (i = 0; i < AR8216_NUM_PORTS; i++) {
565                                 u8 mask = (1 << i);
566                                 if (vp & mask)
567                                         portmask[i] |= vp & ~mask;
568                         }
569
570                         ar8216_vtu_op(priv,
571                                 AR8216_VTU_OP_LOAD |
572                                 (priv->vlan_id[j] << AR8216_VTU_VID_S),
573                                 priv->vlan_table[j]);
574                 }
575         } else {
576                 /* vlan disabled:
577                  * isolate all ports, but connect them to the cpu port */
578                 for (i = 0; i < AR8216_NUM_PORTS; i++) {
579                         if (i == AR8216_PORT_CPU)
580                                 continue;
581
582                         portmask[i] = 1 << AR8216_PORT_CPU;
583                         portmask[AR8216_PORT_CPU] |= (1 << i);
584                 }
585         }
586
587         /* update the port destination mask registers and tag settings */
588         for (i = 0; i < AR8216_NUM_PORTS; i++) {
589                 int egress, ingress;
590                 int pvid;
591
592                 if (priv->vlan) {
593                         pvid = priv->vlan_id[priv->pvid[i]];
594                 } else {
595                         pvid = i;
596                 }
597
598                 if (priv->vlan) {
599                         if (priv->vlan_tagged & (1 << i))
600                                 egress = AR8216_OUT_ADD_VLAN;
601                         else
602                                 egress = AR8216_OUT_STRIP_VLAN;
603                 } else {
604                         egress = AR8216_OUT_KEEP;
605                 }
606                 if (priv->vlan) {
607                         ingress = AR8216_IN_SECURE;
608                 } else {
609                         ingress = AR8216_IN_PORT_ONLY;
610                 }
611
612                 if (priv->chip == AR8236)
613                         ar8236_setup_port(priv, i, egress, ingress, portmask[i],
614                                           pvid);
615                 else
616                         ar8216_setup_port(priv, i, egress, ingress, portmask[i],
617                                           pvid);
618         }
619         mutex_unlock(&priv->reg_mutex);
620         return 0;
621 }
622
623 static int
624 ar8236_hw_init(struct ar8216_priv *priv) {
625         static int initialized;
626         int i;
627         struct mii_bus *bus;
628
629         if (initialized)
630                 return 0;
631
632         /* Initialize the PHYs */
633         bus = priv->phy->bus;
634         for (i = 0; i < 5; i++) {
635                 bus->write(bus, i, MII_ADVERTISE,
636                            ADVERTISE_ALL | ADVERTISE_PAUSE_CAP |
637                            ADVERTISE_PAUSE_ASYM);
638                 bus->write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
639         }
640         msleep(1000);
641
642         initialized = true;
643         return 0;
644 }
645
646 static int
647 ar8316_hw_init(struct ar8216_priv *priv) {
648         int i;
649         u32 val, newval;
650         struct mii_bus *bus;
651
652         val = priv->read(priv, 0x8);
653
654         if (priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
655                 if (priv->port4_phy) {
656                         /* value taken from Ubiquiti RouterStation Pro */
657                         newval = 0x81461bea;
658                         printk(KERN_INFO "ar8316: Using port 4 as PHY\n");
659                 } else {
660                         newval = 0x01261be2;
661                         printk(KERN_INFO "ar8316: Using port 4 as switch port\n");
662                 }
663         } else if (priv->phy->interface == PHY_INTERFACE_MODE_GMII) {
664                 /* value taken from AVM Fritz!Box 7390 sources */
665                 newval = 0x010e5b71;
666         } else {
667                 /* no known value for phy interface */
668                 printk(KERN_ERR "ar8316: unsupported mii mode: %d.\n",
669                         priv->phy->interface);
670                 return -EINVAL;
671         }
672
673         if (val == newval)
674                 goto out;
675
676         priv->write(priv, 0x8, newval);
677
678         /* standard atheros magic */
679         priv->write(priv, 0x38, 0xc000050e);
680
681         /* Initialize the ports */
682         bus = priv->phy->bus;
683         for (i = 0; i < 5; i++) {
684                 if ((i == 4) && priv->port4_phy &&
685                     priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
686                         /* work around for phy4 rgmii mode */
687                         mdiobus_write(bus, i, MII_ATH_DBG_ADDR, 0x12);
688                         mdiobus_write(bus, i, MII_ATH_DBG_DATA, 0x480c);
689                         /* rx delay */
690                         mdiobus_write(bus, i, MII_ATH_DBG_ADDR, 0x0);
691                         mdiobus_write(bus, i, MII_ATH_DBG_DATA, 0x824e);
692                         /* tx delay */
693                         mdiobus_write(bus, i, MII_ATH_DBG_ADDR, 0x5);
694                         mdiobus_write(bus, i, MII_ATH_DBG_DATA, 0x3d47);
695                         msleep(1000);
696                 }
697
698                 /* initialize the port itself */
699                 mdiobus_write(bus, i, MII_ADVERTISE,
700                         ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
701                 mdiobus_write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL);
702                 mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
703                 msleep(1000);
704         }
705
706 out:
707         priv->initialized = true;
708         return 0;
709 }
710
711 static int
712 ar8216_reset_switch(struct switch_dev *dev)
713 {
714         struct ar8216_priv *priv = to_ar8216(dev);
715         int i;
716
717         mutex_lock(&priv->reg_mutex);
718         memset(&priv->vlan, 0, sizeof(struct ar8216_priv) -
719                 offsetof(struct ar8216_priv, vlan));
720         for (i = 0; i < AR8X16_MAX_VLANS; i++) {
721                 priv->vlan_id[i] = i;
722         }
723         for (i = 0; i < AR8216_NUM_PORTS; i++) {
724                 /* Enable port learning and tx */
725                 priv->write(priv, AR8216_REG_PORT_CTRL(i),
726                         AR8216_PORT_CTRL_LEARN |
727                         (4 << AR8216_PORT_CTRL_STATE_S));
728
729                 priv->write(priv, AR8216_REG_PORT_VLAN(i), 0);
730
731                 /* Configure all PHYs */
732                 if (i == AR8216_PORT_CPU) {
733                         priv->write(priv, AR8216_REG_PORT_STATUS(i),
734                                 AR8216_PORT_STATUS_LINK_UP |
735                                 ((priv->chip == AR8316) ?
736                                         AR8216_PORT_SPEED_1000M : AR8216_PORT_SPEED_100M) |
737                                 AR8216_PORT_STATUS_TXMAC |
738                                 AR8216_PORT_STATUS_RXMAC |
739                                 ((priv->chip == AR8316) ? AR8216_PORT_STATUS_RXFLOW : 0) |
740                                 ((priv->chip == AR8316) ? AR8216_PORT_STATUS_TXFLOW : 0) |
741                                 AR8216_PORT_STATUS_DUPLEX);
742                 } else {
743                         priv->write(priv, AR8216_REG_PORT_STATUS(i),
744                                 AR8216_PORT_STATUS_LINK_AUTO);
745                 }
746         }
747         /* XXX: undocumented magic from atheros, required! */
748         priv->write(priv, 0x38, 0xc000050e);
749
750         if (priv->chip == AR8216) {
751                 ar8216_rmw(priv, AR8216_REG_GLOBAL_CTRL,
752                         AR8216_GCTRL_MTU, 1518 + 8 + 2);
753         } else if (priv->chip == AR8316 ||
754                    priv->chip == AR8236) {
755                 /* enable jumbo frames */
756                 ar8216_rmw(priv, AR8216_REG_GLOBAL_CTRL,
757                         AR8316_GCTRL_MTU, 9018 + 8 + 2);
758         }
759
760         if (priv->chip == AR8316) {
761                 /* enable cpu port to receive multicast and broadcast frames */
762                 priv->write(priv, AR8216_REG_FLOOD_MASK, 0x003f003f);
763         }
764         mutex_unlock(&priv->reg_mutex);
765         return ar8216_hw_apply(dev);
766 }
767
768
769 static const struct switch_dev_ops ar8216_ops = {
770         .attr_global = {
771                 .attr = ar8216_globals,
772                 .n_attr = ARRAY_SIZE(ar8216_globals),
773         },
774         .attr_port = {
775                 .attr = ar8216_port,
776                 .n_attr = ARRAY_SIZE(ar8216_port),
777         },
778         .attr_vlan = {
779                 .attr = ar8216_vlan,
780                 .n_attr = ARRAY_SIZE(ar8216_vlan),
781         },
782         .get_port_pvid = ar8216_get_pvid,
783         .set_port_pvid = ar8216_set_pvid,
784         .get_vlan_ports = ar8216_get_ports,
785         .set_vlan_ports = ar8216_set_ports,
786         .apply_config = ar8216_hw_apply,
787         .reset_switch = ar8216_reset_switch,
788 };
789
790 static int
791 ar8216_config_init(struct phy_device *pdev)
792 {
793         struct ar8216_priv *priv = pdev->priv;
794         struct net_device *dev = pdev->attached_dev;
795         struct switch_dev *swdev;
796         int ret;
797
798         if (!priv) {
799                 priv = kzalloc(sizeof(struct ar8216_priv), GFP_KERNEL);
800                 if (priv == NULL)
801                         return -ENOMEM;
802         }
803
804         priv->phy = pdev;
805
806         priv->chip = ar8216_id_chip(priv);
807
808         if (pdev->addr != 0) {
809                 if (priv->chip == AR8316) {
810                         pdev->supported |= SUPPORTED_1000baseT_Full;
811                         pdev->advertising |= ADVERTISED_1000baseT_Full;
812
813                         /* check if we're attaching to the switch twice */
814                         pdev = pdev->bus->phy_map[0];
815                         if (!pdev) {
816                                 kfree(priv);
817                                 return 0;
818                         }
819
820                         /* switch device has not been initialized, reuse priv */
821                         if (!pdev->priv) {
822                                 priv->port4_phy = true;
823                                 pdev->priv = priv;
824                                 return 0;
825                         }
826
827                         kfree(priv);
828
829                         /* switch device has been initialized, reinit */
830                         priv = pdev->priv;
831                         priv->dev.ports = (AR8216_NUM_PORTS - 1);
832                         priv->initialized = false;
833                         priv->port4_phy = true;
834                         ar8316_hw_init(priv);
835                         return 0;
836                 }
837
838                 kfree(priv);
839                 return 0;
840         }
841
842         printk(KERN_INFO "%s: AR%d switch driver attached.\n",
843                 pdev->attached_dev->name, priv->chip);
844
845         pdev->supported = priv->chip == AR8316 ?
846                 SUPPORTED_1000baseT_Full : SUPPORTED_100baseT_Full;
847         pdev->advertising = pdev->supported;
848
849         mutex_init(&priv->reg_mutex);
850         priv->read = ar8216_mii_read;
851         priv->write = ar8216_mii_write;
852
853         pdev->priv = priv;
854
855         swdev = &priv->dev;
856         swdev->cpu_port = AR8216_PORT_CPU;
857         swdev->ops = &ar8216_ops;
858         swdev->ports = AR8216_NUM_PORTS;
859
860         if (priv->chip == AR8316) {
861                 swdev->name = "Atheros AR8316";
862                 swdev->vlans = AR8X16_MAX_VLANS;
863
864                 if (priv->port4_phy) {
865                         /* port 5 connected to the other mac, therefore unusable */
866                         swdev->ports = (AR8216_NUM_PORTS - 1);
867                 }
868         } else if (priv->chip == AR8236) {
869                 swdev->name = "Atheros AR8236";
870                 swdev->vlans = AR8216_NUM_VLANS;
871                 swdev->ports = AR8216_NUM_PORTS;
872         } else {
873                 swdev->name = "Atheros AR8216";
874                 swdev->vlans = AR8216_NUM_VLANS;
875         }
876
877         if ((ret = register_switch(&priv->dev, pdev->attached_dev)) < 0) {
878                 kfree(priv);
879                 goto done;
880         }
881
882         priv->init = true;
883
884         if (priv->chip == AR8316) {
885                 ret = ar8316_hw_init(priv);
886                 if (ret) {
887                         kfree(priv);
888                         goto done;
889                 }
890         }
891
892         if (priv->chip == AR8236) {
893                 ret = ar8236_hw_init(priv);
894                 if (ret) {
895                         kfree(priv);
896                         goto done;
897                 }
898         }
899
900         ret = ar8216_reset_switch(&priv->dev);
901         if (ret) {
902                 kfree(priv);
903                 goto done;
904         }
905
906         dev->phy_ptr = priv;
907
908         /* VID fixup only needed on ar8216 */
909         if (pdev->addr == 0 && priv->chip == AR8216) {
910                 pdev->pkt_align = 2;
911                 pdev->netif_receive_skb = ar8216_netif_receive_skb;
912                 pdev->netif_rx = ar8216_netif_rx;
913                 priv->ndo_old = dev->netdev_ops;
914                 memcpy(&priv->ndo, priv->ndo_old, sizeof(struct net_device_ops));
915                 priv->ndo.ndo_start_xmit = ar8216_mangle_tx;
916                 dev->netdev_ops = &priv->ndo;
917         }
918
919         priv->init = false;
920
921 done:
922         return ret;
923 }
924
925 static int
926 ar8216_read_status(struct phy_device *phydev)
927 {
928         struct ar8216_priv *priv = phydev->priv;
929         int ret;
930         if (phydev->addr != 0) {
931                 return genphy_read_status(phydev);
932         }
933
934         phydev->speed = priv->chip == AR8316 ? SPEED_1000 : SPEED_100;
935         phydev->duplex = DUPLEX_FULL;
936         phydev->link = 1;
937
938         /* flush the address translation unit */
939         mutex_lock(&priv->reg_mutex);
940         ret = ar8216_wait_bit(priv, AR8216_REG_ATU, AR8216_ATU_ACTIVE, 0);
941
942         if (!ret)
943                 priv->write(priv, AR8216_REG_ATU, AR8216_ATU_OP_FLUSH);
944         else
945                 ret = -ETIMEDOUT;
946         mutex_unlock(&priv->reg_mutex);
947
948         phydev->state = PHY_RUNNING;
949         netif_carrier_on(phydev->attached_dev);
950         phydev->adjust_link(phydev->attached_dev);
951
952         return ret;
953 }
954
955 static int
956 ar8216_config_aneg(struct phy_device *phydev)
957 {
958         if (phydev->addr == 0)
959                 return 0;
960
961         return genphy_config_aneg(phydev);
962 }
963
964 static int
965 ar8216_probe(struct phy_device *pdev)
966 {
967         struct ar8216_priv priv;
968         u16 chip;
969
970         priv.phy = pdev;
971         chip = ar8216_id_chip(&priv);
972         if (chip == UNKNOWN)
973                 return -ENODEV;
974
975         return 0;
976 }
977
978 static void
979 ar8216_remove(struct phy_device *pdev)
980 {
981         struct ar8216_priv *priv = pdev->priv;
982         struct net_device *dev = pdev->attached_dev;
983
984         if (!priv)
985                 return;
986
987         if (priv->ndo_old && dev)
988                 dev->netdev_ops = priv->ndo_old;
989         if (pdev->addr == 0)
990                 unregister_switch(&priv->dev);
991         kfree(priv);
992 }
993
994 static struct phy_driver ar8216_driver = {
995         .phy_id         = 0x004d0000,
996         .name           = "Atheros AR8216/AR8316/AR8326",
997         .phy_id_mask    = 0xffff0000,
998         .features       = PHY_BASIC_FEATURES,
999         .probe          = ar8216_probe,
1000         .remove         = ar8216_remove,
1001         .config_init    = &ar8216_config_init,
1002         .config_aneg    = &ar8216_config_aneg,
1003         .read_status    = &ar8216_read_status,
1004         .driver         = { .owner = THIS_MODULE },
1005 };
1006
1007 int __init
1008 ar8216_init(void)
1009 {
1010         return phy_driver_register(&ar8216_driver);
1011 }
1012
1013 void __exit
1014 ar8216_exit(void)
1015 {
1016         phy_driver_unregister(&ar8216_driver);
1017 }
1018
1019 module_init(ar8216_init);
1020 module_exit(ar8216_exit);
1021 MODULE_LICENSE("GPL");
1022