ar8316: automatically detect whether port4 is used as PHY or as a switch port
[openwrt.git] / target / linux / generic / files / drivers / net / phy / ar8216.c
1 /*
2  * ar8216.c: AR8216 switch driver
3  *
4  * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * as published by the Free Software Foundation; either version 2
9  * of the License, or (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  */
16
17 #include <linux/if.h>
18 #include <linux/module.h>
19 #include <linux/init.h>
20 #include <linux/list.h>
21 #include <linux/if_ether.h>
22 #include <linux/skbuff.h>
23 #include <linux/netdevice.h>
24 #include <linux/netlink.h>
25 #include <linux/bitops.h>
26 #include <net/genetlink.h>
27 #include <linux/switch.h>
28 #include <linux/delay.h>
29 #include <linux/phy.h>
30 #include <linux/netdevice.h>
31 #include <linux/etherdevice.h>
32 #include "ar8216.h"
33
34 /* size of the vlan table */
35 #define AR8X16_MAX_VLANS        128
36 #define AR8X16_PROBE_RETRIES    10
37
38 struct ar8216_priv {
39         struct switch_dev dev;
40         struct phy_device *phy;
41         u32 (*read)(struct ar8216_priv *priv, int reg);
42         void (*write)(struct ar8216_priv *priv, int reg, u32 val);
43         const struct net_device_ops *ndo_old;
44         struct net_device_ops ndo;
45         struct mutex reg_mutex;
46         int chip;
47         bool initialized;
48         bool port4_phy;
49
50         /* all fields below are cleared on reset */
51         bool vlan;
52         u16 vlan_id[AR8X16_MAX_VLANS];
53         u8 vlan_table[AR8X16_MAX_VLANS];
54         u8 vlan_tagged;
55         u16 pvid[AR8216_NUM_PORTS];
56 };
57
58 #define to_ar8216(_dev) container_of(_dev, struct ar8216_priv, dev)
59
60 static inline void
61 split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
62 {
63         regaddr >>= 1;
64         *r1 = regaddr & 0x1e;
65
66         regaddr >>= 5;
67         *r2 = regaddr & 0x7;
68
69         regaddr >>= 3;
70         *page = regaddr & 0x1ff;
71 }
72
73 static u32
74 ar8216_mii_read(struct ar8216_priv *priv, int reg)
75 {
76         struct phy_device *phy = priv->phy;
77         u16 r1, r2, page;
78         u16 lo, hi;
79
80         split_addr((u32) reg, &r1, &r2, &page);
81         phy->bus->write(phy->bus, 0x18, 0, page);
82         msleep(1); /* wait for the page switch to propagate */
83         lo = phy->bus->read(phy->bus, 0x10 | r2, r1);
84         hi = phy->bus->read(phy->bus, 0x10 | r2, r1 + 1);
85
86         return (hi << 16) | lo;
87 }
88
89 static void
90 ar8216_mii_write(struct ar8216_priv *priv, int reg, u32 val)
91 {
92         struct phy_device *phy = priv->phy;
93         u16 r1, r2, r3;
94         u16 lo, hi;
95
96         split_addr((u32) reg, &r1, &r2, &r3);
97         phy->bus->write(phy->bus, 0x18, 0, r3);
98         msleep(1); /* wait for the page switch to propagate */
99
100         lo = val & 0xffff;
101         hi = (u16) (val >> 16);
102         phy->bus->write(phy->bus, 0x10 | r2, r1 + 1, hi);
103         phy->bus->write(phy->bus, 0x10 | r2, r1, lo);
104 }
105
106 static u32
107 ar8216_rmw(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
108 {
109         u32 v;
110
111         v = priv->read(priv, reg);
112         v &= ~mask;
113         v |= val;
114         priv->write(priv, reg, v);
115
116         return v;
117 }
118
119 static inline int
120 ar8216_id_chip(struct ar8216_priv *priv)
121 {
122         u32 val;
123         u16 id;
124         int i;
125
126         val = ar8216_mii_read(priv, AR8216_REG_CTRL);
127         if (val == ~0)
128                 return UNKNOWN;
129
130         id = val & (AR8216_CTRL_REVISION | AR8216_CTRL_VERSION);
131         for (i = 0; i < AR8X16_PROBE_RETRIES; i++) {
132                 u16 t;
133
134                 val = ar8216_mii_read(priv, AR8216_REG_CTRL);
135                 if (val == ~0)
136                         return UNKNOWN;
137
138                 t = val & (AR8216_CTRL_REVISION | AR8216_CTRL_VERSION);
139                 if (t != id)
140                         return UNKNOWN;
141         }
142
143         switch (id) {
144         case 0x0101:
145                 return AR8216;
146         case 0x1000:
147         case 0x1001:
148                 return AR8316;
149         default:
150                 printk(KERN_DEBUG
151                         "ar8216: Unknown Atheros device [ver=%d, rev=%d, phy_id=%04x%04x]\n",
152                         (int)(id >> AR8216_CTRL_VERSION_S),
153                         (int)(id & AR8216_CTRL_REVISION),
154                         priv->phy->bus->read(priv->phy->bus, priv->phy->addr, 2),
155                         priv->phy->bus->read(priv->phy->bus, priv->phy->addr, 3));
156
157                 return UNKNOWN;
158         }
159 }
160
161 static int
162 ar8216_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
163                 struct switch_val *val)
164 {
165         struct ar8216_priv *priv = to_ar8216(dev);
166         priv->vlan = !!val->value.i;
167         return 0;
168 }
169
170 static int
171 ar8216_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
172                 struct switch_val *val)
173 {
174         struct ar8216_priv *priv = to_ar8216(dev);
175         val->value.i = priv->vlan;
176         return 0;
177 }
178
179
180 static int
181 ar8216_set_pvid(struct switch_dev *dev, int port, int vlan)
182 {
183         struct ar8216_priv *priv = to_ar8216(dev);
184
185         /* make sure no invalid PVIDs get set */
186
187         if (vlan >= dev->vlans)
188                 return -EINVAL;
189
190         priv->pvid[port] = vlan;
191         return 0;
192 }
193
194 static int
195 ar8216_get_pvid(struct switch_dev *dev, int port, int *vlan)
196 {
197         struct ar8216_priv *priv = to_ar8216(dev);
198         *vlan = priv->pvid[port];
199         return 0;
200 }
201
202 static int
203 ar8216_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
204                 struct switch_val *val)
205 {
206         struct ar8216_priv *priv = to_ar8216(dev);
207         priv->vlan_id[val->port_vlan] = val->value.i;
208         return 0;
209 }
210
211 static int
212 ar8216_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
213                 struct switch_val *val)
214 {
215         struct ar8216_priv *priv = to_ar8216(dev);
216         val->value.i = priv->vlan_id[val->port_vlan];
217         return 0;
218 }
219
220
221 static int
222 ar8216_mangle_tx(struct sk_buff *skb, struct net_device *dev)
223 {
224         struct ar8216_priv *priv = dev->phy_ptr;
225         unsigned char *buf;
226
227     if (unlikely(!priv))
228         goto error;
229
230         if (!priv->vlan)
231                 goto send;
232
233         if (unlikely(skb_headroom(skb) < 2)) {
234                 if (pskb_expand_head(skb, 2, 0, GFP_ATOMIC) < 0)
235                         goto error;
236         }
237
238         buf = skb_push(skb, 2);
239         buf[0] = 0x10;
240         buf[1] = 0x80;
241
242 send:
243         return priv->ndo_old->ndo_start_xmit(skb, dev);
244
245 error:
246         dev_kfree_skb_any(skb);
247         return 0;
248 }
249
250 static int
251 ar8216_mangle_rx(struct sk_buff *skb, int napi)
252 {
253         struct ar8216_priv *priv;
254         struct net_device *dev;
255         unsigned char *buf;
256         int port, vlan;
257
258         dev = skb->dev;
259         if (!dev)
260                 goto error;
261
262         priv = dev->phy_ptr;
263         if (!priv)
264                 goto error;
265
266         /* don't strip the header if vlan mode is disabled */
267         if (!priv->vlan)
268                 goto recv;
269
270         /* strip header, get vlan id */
271         buf = skb->data;
272         skb_pull(skb, 2);
273
274         /* check for vlan header presence */
275         if ((buf[12 + 2] != 0x81) || (buf[13 + 2] != 0x00))
276                 goto recv;
277
278         port = buf[0] & 0xf;
279
280         /* no need to fix up packets coming from a tagged source */
281         if (priv->vlan_tagged & (1 << port))
282                 goto recv;
283
284         /* lookup port vid from local table, the switch passes an invalid vlan id */
285         vlan = priv->vlan_id[priv->pvid[port]];
286
287         buf[14 + 2] &= 0xf0;
288         buf[14 + 2] |= vlan >> 8;
289         buf[15 + 2] = vlan & 0xff;
290
291 recv:
292         skb->protocol = eth_type_trans(skb, skb->dev);
293
294         if (napi)
295                 return netif_receive_skb(skb);
296         else
297                 return netif_rx(skb);
298
299 error:
300         /* no vlan? eat the packet! */
301         dev_kfree_skb_any(skb);
302         return NET_RX_DROP;
303 }
304
305 static int
306 ar8216_netif_rx(struct sk_buff *skb)
307 {
308         return ar8216_mangle_rx(skb, 0);
309 }
310
311 static int
312 ar8216_netif_receive_skb(struct sk_buff *skb)
313 {
314         return ar8216_mangle_rx(skb, 1);
315 }
316
317
318 static struct switch_attr ar8216_globals[] = {
319         {
320                 .type = SWITCH_TYPE_INT,
321                 .name = "enable_vlan",
322                 .description = "Enable VLAN mode",
323                 .set = ar8216_set_vlan,
324                 .get = ar8216_get_vlan,
325                 .max = 1
326         },
327 };
328
329 static struct switch_attr ar8216_port[] = {
330 };
331
332 static struct switch_attr ar8216_vlan[] = {
333         {
334                 .type = SWITCH_TYPE_INT,
335                 .name = "vid",
336                 .description = "VLAN ID (0-4094)",
337                 .set = ar8216_set_vid,
338                 .get = ar8216_get_vid,
339                 .max = 4094,
340         },
341 };
342
343
344 static int
345 ar8216_get_ports(struct switch_dev *dev, struct switch_val *val)
346 {
347         struct ar8216_priv *priv = to_ar8216(dev);
348         u8 ports = priv->vlan_table[val->port_vlan];
349         int i;
350
351         val->len = 0;
352         for (i = 0; i < AR8216_NUM_PORTS; i++) {
353                 struct switch_port *p;
354
355                 if (!(ports & (1 << i)))
356                         continue;
357
358                 p = &val->value.ports[val->len++];
359                 p->id = i;
360                 if (priv->vlan_tagged & (1 << i))
361                         p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
362                 else
363                         p->flags = 0;
364         }
365         return 0;
366 }
367
368 static int
369 ar8216_set_ports(struct switch_dev *dev, struct switch_val *val)
370 {
371         struct ar8216_priv *priv = to_ar8216(dev);
372         u8 *vt = &priv->vlan_table[val->port_vlan];
373         int i, j;
374
375         *vt = 0;
376         for (i = 0; i < val->len; i++) {
377                 struct switch_port *p = &val->value.ports[i];
378
379                 if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
380                         priv->vlan_tagged |= (1 << p->id);
381                 else {
382                         priv->vlan_tagged &= ~(1 << p->id);
383                         priv->pvid[p->id] = val->port_vlan;
384
385                         /* make sure that an untagged port does not
386                          * appear in other vlans */
387                         for (j = 0; j < AR8X16_MAX_VLANS; j++) {
388                                 if (j == val->port_vlan)
389                                         continue;
390                                 priv->vlan_table[j] &= ~(1 << p->id);
391                         }
392                 }
393
394                 *vt |= 1 << p->id;
395         }
396         return 0;
397 }
398
399 static int
400 ar8216_wait_bit(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
401 {
402         int timeout = 20;
403
404         while ((priv->read(priv, reg) & mask) != val) {
405                 if (timeout-- <= 0) {
406                         printk(KERN_ERR "ar8216: timeout waiting for operation to complete\n");
407                         return 1;
408                 }
409         }
410         return 0;
411 }
412
413 static void
414 ar8216_vtu_op(struct ar8216_priv *priv, u32 op, u32 val)
415 {
416         if (ar8216_wait_bit(priv, AR8216_REG_VTU, AR8216_VTU_ACTIVE, 0))
417                 return;
418         if ((op & AR8216_VTU_OP) == AR8216_VTU_OP_LOAD) {
419                 val &= AR8216_VTUDATA_MEMBER;
420                 val |= AR8216_VTUDATA_VALID;
421                 priv->write(priv, AR8216_REG_VTU_DATA, val);
422         }
423         op |= AR8216_VTU_ACTIVE;
424         priv->write(priv, AR8216_REG_VTU, op);
425 }
426
427 static int
428 ar8216_hw_apply(struct switch_dev *dev)
429 {
430         struct ar8216_priv *priv = to_ar8216(dev);
431         u8 portmask[AR8216_NUM_PORTS];
432         int i, j;
433
434         mutex_lock(&priv->reg_mutex);
435         /* flush all vlan translation unit entries */
436         ar8216_vtu_op(priv, AR8216_VTU_OP_FLUSH, 0);
437
438         memset(portmask, 0, sizeof(portmask));
439         if (priv->vlan) {
440                 /* calculate the port destination masks and load vlans
441                  * into the vlan translation unit */
442                 for (j = 0; j < AR8X16_MAX_VLANS; j++) {
443                         u8 vp = priv->vlan_table[j];
444
445                         if (!vp)
446                                 continue;
447
448                         for (i = 0; i < AR8216_NUM_PORTS; i++) {
449                                 u8 mask = (1 << i);
450                                 if (vp & mask)
451                                         portmask[i] |= vp & ~mask;
452                         }
453
454                         ar8216_vtu_op(priv,
455                                 AR8216_VTU_OP_LOAD |
456                                 (priv->vlan_id[j] << AR8216_VTU_VID_S),
457                                 priv->vlan_table[j]);
458                 }
459         } else {
460                 /* vlan disabled:
461                  * isolate all ports, but connect them to the cpu port */
462                 for (i = 0; i < AR8216_NUM_PORTS; i++) {
463                         if (i == AR8216_PORT_CPU)
464                                 continue;
465
466                         portmask[i] = 1 << AR8216_PORT_CPU;
467                         portmask[AR8216_PORT_CPU] |= (1 << i);
468                 }
469         }
470
471         /* update the port destination mask registers and tag settings */
472         for (i = 0; i < AR8216_NUM_PORTS; i++) {
473                 int egress, ingress;
474                 int pvid;
475
476                 if (priv->vlan) {
477                         pvid = priv->vlan_id[priv->pvid[i]];
478                 } else {
479                         pvid = i;
480                 }
481
482                 if (priv->vlan && (priv->vlan_tagged & (1 << i))) {
483                         egress = AR8216_OUT_ADD_VLAN;
484                 } else {
485                         egress = AR8216_OUT_STRIP_VLAN;
486                 }
487                 if (priv->vlan) {
488                         ingress = AR8216_IN_SECURE;
489                 } else {
490                         ingress = AR8216_IN_PORT_ONLY;
491                 }
492
493                 ar8216_rmw(priv, AR8216_REG_PORT_CTRL(i),
494                         AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
495                         AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
496                         AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
497                         AR8216_PORT_CTRL_LEARN |
498                           (priv->vlan && i == AR8216_PORT_CPU && (priv->chip == AR8216) ?
499                            AR8216_PORT_CTRL_HEADER : 0) |
500                           (egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
501                           (AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
502
503                 ar8216_rmw(priv, AR8216_REG_PORT_VLAN(i),
504                         AR8216_PORT_VLAN_DEST_PORTS | AR8216_PORT_VLAN_MODE |
505                           AR8216_PORT_VLAN_DEFAULT_ID,
506                         (portmask[i] << AR8216_PORT_VLAN_DEST_PORTS_S) |
507                           (ingress << AR8216_PORT_VLAN_MODE_S) |
508                           (pvid << AR8216_PORT_VLAN_DEFAULT_ID_S));
509         }
510         mutex_unlock(&priv->reg_mutex);
511         return 0;
512 }
513
514 static int
515 ar8316_hw_init(struct ar8216_priv *priv) {
516         int i;
517         u32 val, newval;
518         struct mii_bus *bus;
519
520         val = priv->read(priv, 0x8);
521
522         if (priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
523                 if (priv->port4_phy) {
524                         /* value taken from Ubiquiti RouterStation Pro */
525                         newval = 0x81461bea;
526                         printk(KERN_INFO "ar8316: Using port 4 as PHY\n");
527                 } else {
528                         newval = 0x01261be2;
529                         printk(KERN_INFO "ar8316: Using port 4 as switch port\n");
530                 }
531         } else if (priv->phy->interface == PHY_INTERFACE_MODE_GMII) {
532                 /* value taken from AVM Fritz!Box 7390 sources */
533                 newval = 0x010e5b71;
534         } else {
535                 /* no known value for phy interface */
536                 printk(KERN_ERR "ar8316: unsupported mii mode: %d.\n",
537                         priv->phy->interface);
538                 return -EINVAL;
539         }
540
541         if (val == newval)
542                 goto out;
543
544         priv->write(priv, 0x8, newval);
545
546         /* standard atheros magic */
547         priv->write(priv, 0x38, 0xc000050e);
548
549         /* Initialize the ports */
550         bus = priv->phy->bus;
551         for (i = 0; i < 5; i++) {
552                 if ((i == 4) && priv->port4_phy &&
553                     priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
554                         /* work around for phy4 rgmii mode */
555                         bus->write(bus, i, MII_ATH_DBG_ADDR, 0x12);
556                         bus->write(bus, i, MII_ATH_DBG_DATA, 0x480c);
557                         /* rx delay */
558                         bus->write(bus, i, MII_ATH_DBG_ADDR, 0x0);
559                         bus->write(bus, i, MII_ATH_DBG_DATA, 0x824e);
560                         /* tx delay */
561                         bus->write(bus, i, MII_ATH_DBG_ADDR, 0x5);
562                         bus->write(bus, i, MII_ATH_DBG_DATA, 0x3d47);
563                         msleep(1000);
564                 }
565
566                 /* initialize the port itself */
567                 bus->write(bus, i, MII_ADVERTISE,
568                         ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
569                 bus->write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL);
570                 bus->write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
571                 msleep(1000);
572         }
573
574 out:
575         priv->initialized = true;
576         return 0;
577 }
578
579 static int
580 ar8216_reset_switch(struct switch_dev *dev)
581 {
582         struct ar8216_priv *priv = to_ar8216(dev);
583         int i;
584
585         mutex_lock(&priv->reg_mutex);
586         memset(&priv->vlan, 0, sizeof(struct ar8216_priv) -
587                 offsetof(struct ar8216_priv, vlan));
588         for (i = 0; i < AR8X16_MAX_VLANS; i++) {
589                 priv->vlan_id[i] = i;
590         }
591         for (i = 0; i < AR8216_NUM_PORTS; i++) {
592                 /* Enable port learning and tx */
593                 priv->write(priv, AR8216_REG_PORT_CTRL(i),
594                         AR8216_PORT_CTRL_LEARN |
595                         (4 << AR8216_PORT_CTRL_STATE_S));
596
597                 priv->write(priv, AR8216_REG_PORT_VLAN(i), 0);
598
599                 /* Configure all PHYs */
600                 if (i == AR8216_PORT_CPU) {
601                         priv->write(priv, AR8216_REG_PORT_STATUS(i),
602                                 AR8216_PORT_STATUS_LINK_UP |
603                                 ((priv->chip == AR8316) ?
604                                         AR8216_PORT_SPEED_1000M : AR8216_PORT_SPEED_100M) |
605                                 AR8216_PORT_STATUS_TXMAC |
606                                 AR8216_PORT_STATUS_RXMAC |
607                                 ((priv->chip == AR8316) ? AR8216_PORT_STATUS_RXFLOW : 0) |
608                                 ((priv->chip == AR8316) ? AR8216_PORT_STATUS_TXFLOW : 0) |
609                                 AR8216_PORT_STATUS_DUPLEX);
610                 } else {
611                         priv->write(priv, AR8216_REG_PORT_STATUS(i),
612                                 AR8216_PORT_STATUS_LINK_AUTO);
613                 }
614         }
615         /* XXX: undocumented magic from atheros, required! */
616         priv->write(priv, 0x38, 0xc000050e);
617
618         if (priv->chip == AR8216) {
619                 ar8216_rmw(priv, AR8216_REG_GLOBAL_CTRL,
620                         AR8216_GCTRL_MTU, 1518 + 8 + 2);
621         } else if (priv->chip == AR8316) {
622                 /* enable jumbo frames */
623                 ar8216_rmw(priv, AR8216_REG_GLOBAL_CTRL,
624                         AR8316_GCTRL_MTU, 9018 + 8 + 2);
625         }
626
627         if (priv->chip == AR8316) {
628                 /* enable cpu port to receive multicast and broadcast frames */
629                 priv->write(priv, AR8216_REG_FLOOD_MASK, 0x003f003f);
630         }
631         mutex_unlock(&priv->reg_mutex);
632         return ar8216_hw_apply(dev);
633 }
634
635
636 static const struct switch_dev_ops ar8216_ops = {
637         .attr_global = {
638                 .attr = ar8216_globals,
639                 .n_attr = ARRAY_SIZE(ar8216_globals),
640         },
641         .attr_port = {
642                 .attr = ar8216_port,
643                 .n_attr = ARRAY_SIZE(ar8216_port),
644         },
645         .attr_vlan = {
646                 .attr = ar8216_vlan,
647                 .n_attr = ARRAY_SIZE(ar8216_vlan),
648         },
649         .get_port_pvid = ar8216_get_pvid,
650         .set_port_pvid = ar8216_set_pvid,
651         .get_vlan_ports = ar8216_get_ports,
652         .set_vlan_ports = ar8216_set_ports,
653         .apply_config = ar8216_hw_apply,
654         .reset_switch = ar8216_reset_switch,
655 };
656
657 static int
658 ar8216_config_init(struct phy_device *pdev)
659 {
660         struct ar8216_priv *priv = pdev->priv;
661         struct net_device *dev = pdev->attached_dev;
662         struct switch_dev *swdev;
663         int ret;
664
665         if (!priv) {
666                 priv = kzalloc(sizeof(struct ar8216_priv), GFP_KERNEL);
667                 if (priv == NULL)
668                         return -ENOMEM;
669         }
670
671         priv->phy = pdev;
672
673         priv->chip = ar8216_id_chip(priv);
674
675         if (pdev->addr != 0) {
676                 if (priv->chip == AR8316) {
677                         pdev->supported |= SUPPORTED_1000baseT_Full;
678                         pdev->advertising |= ADVERTISED_1000baseT_Full;
679
680                         /* check if we're attaching to the switch twice */
681                         pdev = pdev->bus->phy_map[0];
682                         if (!pdev) {
683                                 kfree(priv);
684                                 return 0;
685                         }
686
687                         /* switch device has not been initialized, reuse priv */
688                         if (!pdev->priv) {
689                                 priv->port4_phy = true;
690                                 pdev->priv = priv;
691                                 return 0;
692                         }
693
694                         kfree(priv);
695
696                         /* switch device has been initialized, reinit */
697                         priv = pdev->priv;
698                         priv->dev.ports = (AR8216_NUM_PORTS - 1);
699                         priv->initialized = false;
700                         priv->port4_phy = true;
701                         ar8316_hw_init(priv);
702                         return 0;
703                 }
704
705                 kfree(priv);
706                 return 0;
707         }
708
709         printk(KERN_INFO "%s: AR%d switch driver attached.\n",
710                 pdev->attached_dev->name, priv->chip);
711
712         pdev->supported = priv->chip == AR8316 ?
713                 SUPPORTED_1000baseT_Full : SUPPORTED_100baseT_Full;
714         pdev->advertising = pdev->supported;
715
716         mutex_init(&priv->reg_mutex);
717         priv->read = ar8216_mii_read;
718         priv->write = ar8216_mii_write;
719
720         pdev->priv = priv;
721
722         swdev = &priv->dev;
723         swdev->cpu_port = AR8216_PORT_CPU;
724         swdev->ops = &ar8216_ops;
725         swdev->ports = AR8216_NUM_PORTS;
726
727         if (priv->chip == AR8316) {
728                 swdev->name = "Atheros AR8316";
729                 swdev->vlans = AR8X16_MAX_VLANS;
730
731                 if (priv->port4_phy) {
732                         /* port 5 connected to the other mac, therefore unusable */
733                         swdev->ports = (AR8216_NUM_PORTS - 1);
734                 }
735         } else {
736                 swdev->name = "Atheros AR8216";
737                 swdev->vlans = AR8216_NUM_VLANS;
738         }
739
740         if ((ret = register_switch(&priv->dev, pdev->attached_dev)) < 0) {
741                 kfree(priv);
742                 goto done;
743         }
744
745         if (priv->chip == AR8316) {
746                 ret = ar8316_hw_init(priv);
747                 if (ret) {
748                         kfree(priv);
749                         goto done;
750                 }
751         }
752
753         ret = ar8216_reset_switch(&priv->dev);
754         if (ret) {
755                 kfree(priv);
756                 goto done;
757         }
758
759         dev->phy_ptr = priv;
760
761         /* VID fixup only needed on ar8216 */
762         if (pdev->addr == 0 && priv->chip == AR8216) {
763                 pdev->pkt_align = 2;
764                 pdev->netif_receive_skb = ar8216_netif_receive_skb;
765                 pdev->netif_rx = ar8216_netif_rx;
766                 priv->ndo_old = dev->netdev_ops;
767                 memcpy(&priv->ndo, priv->ndo_old, sizeof(struct net_device_ops));
768                 priv->ndo.ndo_start_xmit = ar8216_mangle_tx;
769                 dev->netdev_ops = &priv->ndo;
770         }
771
772 done:
773         return ret;
774 }
775
776 static int
777 ar8216_read_status(struct phy_device *phydev)
778 {
779         struct ar8216_priv *priv = phydev->priv;
780         int ret;
781         if (phydev->addr != 0) {
782                 return genphy_read_status(phydev);
783         }
784
785         phydev->speed = priv->chip == AR8316 ? SPEED_1000 : SPEED_100;
786         phydev->duplex = DUPLEX_FULL;
787         phydev->link = 1;
788
789         /* flush the address translation unit */
790         mutex_lock(&priv->reg_mutex);
791         ret = ar8216_wait_bit(priv, AR8216_REG_ATU, AR8216_ATU_ACTIVE, 0);
792
793         if (!ret)
794                 priv->write(priv, AR8216_REG_ATU, AR8216_ATU_OP_FLUSH);
795         else
796                 ret = -ETIMEDOUT;
797         mutex_unlock(&priv->reg_mutex);
798
799         phydev->state = PHY_RUNNING;
800         netif_carrier_on(phydev->attached_dev);
801         phydev->adjust_link(phydev->attached_dev);
802
803         return ret;
804 }
805
806 static int
807 ar8216_config_aneg(struct phy_device *phydev)
808 {
809         if (phydev->addr == 0)
810                 return 0;
811
812         return genphy_config_aneg(phydev);
813 }
814
815 static int
816 ar8216_probe(struct phy_device *pdev)
817 {
818         struct ar8216_priv priv;
819         u16 chip;
820
821         priv.phy = pdev;
822         chip = ar8216_id_chip(&priv);
823         if (chip == UNKNOWN)
824                 return -ENODEV;
825
826         return 0;
827 }
828
829 static void
830 ar8216_remove(struct phy_device *pdev)
831 {
832         struct ar8216_priv *priv = pdev->priv;
833         struct net_device *dev = pdev->attached_dev;
834
835         if (!priv)
836                 return;
837
838         if (priv->ndo_old && dev)
839                 dev->netdev_ops = priv->ndo_old;
840         if (pdev->addr == 0)
841                 unregister_switch(&priv->dev);
842         kfree(priv);
843 }
844
845 static struct phy_driver ar8216_driver = {
846         .phy_id         = 0x004d0000,
847         .name           = "Atheros AR8216/AR8316",
848         .phy_id_mask    = 0xffff0000,
849         .features       = PHY_BASIC_FEATURES,
850         .probe          = ar8216_probe,
851         .remove         = ar8216_remove,
852         .config_init    = &ar8216_config_init,
853         .config_aneg    = &ar8216_config_aneg,
854         .read_status    = &ar8216_read_status,
855         .driver         = { .owner = THIS_MODULE },
856 };
857
858 int __init
859 ar8216_init(void)
860 {
861         return phy_driver_register(&ar8216_driver);
862 }
863
864 void __exit
865 ar8216_exit(void)
866 {
867         phy_driver_unregister(&ar8216_driver);
868 }
869
870 module_init(ar8216_init);
871 module_exit(ar8216_exit);
872 MODULE_LICENSE("GPL");
873