brcm63xx: do not add twice the same field to board
[openwrt.git] / target / linux / brcm63xx /
2014-01-16 florianbrcm63xx: do not add twice the same field to board
2014-01-15 florianbrcm63xx: add USB support to BCM6318
2014-01-15 florianbrcm63xx: fix BCM96318MVWG LEDs
2014-01-15 florianbrcm63xx: remove config-3.11
2014-01-14 florianbrcm63xx: 96368MVWG supports USB gadget, enable it
2014-01-14 florianbrcm63xx: replace gadget driver build fix with upstream...
2014-01-14 florianbrcm63xx: add support for the BCM96318REF_P300 board
2014-01-14 florianbrcm63xx: enable 6318 support
2014-01-14 florianbrcm63xx: add basic support for the BCM96318REF board
2014-01-14 florianbrcm63xx: improve BCM6318 support
2014-01-14 florianbrcm63xx: package the USB gadget module (bcm63xx_udc)
2014-01-14 florianbrcm63xx: target supports USB gadget devices
2014-01-14 florianbrcm63xx: fix USB gadget build failure after 6345 Ethernet
2014-01-14 florianbrcm63xx: allow HSSPI registration on 6318
2014-01-14 florianbrcm63xx: fix build failure on varid
2014-01-13 jogobrcm63xx: fix ohci frame number offset
2014-01-13 jogobrcm63xx: fix spi flash setup on (at least) some refere...
2014-01-13 jogobrcm63xx: add initial support for BCM6318
2014-01-13 jogobrcm63xx: add initial support for BCM63268
2014-01-13 jogobrcm63xx: fix the pcie window size
2014-01-13 jogobrcm63xx: add support for chip variants
2014-01-13 jogobrcm63xx: remove non runtime detect and refresh affinit...
2014-01-13 jogobrcm63xx: update bmips patches with upstream submission
2014-01-13 jogobrcm63xx: spi flash on legacy spi controller needs...
2014-01-13 jogobrcm63xx: fix legacy spi tranfers >= 256 bytes
2014-01-13 jogobrcm63xx: update HSSPI driver with upstream submission
2014-01-11 juhosgkernel: update 3.10 to 3.10.26
2013-12-15 haukekernel: update kernel 3.10 to 3.10.24
2013-12-01 juhosgkernel: update 3.10 to 3.10.21
2013-11-05 juhosgkernel: update 3.10 to 3.10.18
2013-10-23 juhosgkernel: update 3.10 to 3.10.17
2013-10-13 haukekernel: update kernel to 3.10.15
2013-09-27 juhosgkernel: update 3.10 to 3.10.13
2013-09-25 haukekernel: b53: add Register Access Bridge Registers ...
2013-09-15 juhosgkernel: update 3.10 to 3.10.12
2013-09-06 jogobrcm63xx: drop linux 3.9 support
2013-09-06 jogobrcm63xx: switch to linux 3.10
2013-08-23 juhosgkernel: update 3.10 to 3.10.9
2013-07-22 juhosgkernel: update 3.9 to 3.9.11
2013-07-20 jogobrcm63xx: add linux 3.10 support
2013-07-15 nbdbcm63xx: update ralink wlan firmware hotplug script...
2013-07-13 haukekernel: update to kernel 3.9.10 and refresh patches
2013-06-30 jogokernel: update linux 3.9 to 3.9.8
2013-06-30 jogobrcm63xx: Fixes and additions to the GPIO assignment...
2013-06-30 jogobcm63xx: Improve CFE version mod patch.
2013-06-30 jogobcm63xx: enable all SoCs for both subtargets
2013-06-30 jogobcm63xx: make smp kernels boot on older SoCs
2013-06-30 jogobcm63xx: update patches
2013-06-27 floriantargets: prepare for supporting normal and initramfs...
2013-06-24 jogobcm63xx: fix DSL-274xB F1 default network config
2013-06-21 blogicbase-files: input/button drivers get loaded before...
2013-06-21 blogicbase-files: diag does not need to insmod any drivers...
2013-06-20 florianbrcm63xx: reduce the number of Ethernet DMA channels...
2013-06-18 florianbrcm63xx: refresh 3.9 patches
2013-06-18 florianbrcm63xx: provide a default sane MAC address for Cable...
2013-06-17 florianbrcm63xx: create initramfs HCS images
2013-06-17 florianbrcm63xx: simplify HCS image creation
2013-06-17 florianbrcm63xx: remove support for 3.8 kernel
2013-06-17 florianbrcm63xx: switch to 3.9 kernel
2013-06-17 florianbrcm63xx: fix missing antislash in BCM6345 ethernet...
2013-06-06 florianbrcm63xx: add user-space support for Netgear CVG834G
2013-06-06 florianbrcm63xx: add kernel space and image support for the...
2013-06-06 florianbrcm63xx: add Broadcom cable modem firmware format...
2013-06-06 florianbrcm63xx: add support for BCM3368
2013-06-05 jogotarget: don't build jffs2 nor images by default
2013-05-26 juhosgkernel: update linux 3.8 to 3.8.13
2013-05-20 jogokernel: add some missing symbols/move them to generic
2013-05-19 jogobcm63xx: add 3.9 support
2013-05-19 jogobcm63xx: Simplify CFE detection.
2013-05-12 jogokernel: move CONFIG_MIPS_SEAD3 to generic
2013-05-12 jogobcm63xx: don't build CRAMFS
2013-05-12 jogo[brcm63xx] led and buttons support for board DWV-S0
2013-05-12 jogobcm63xx: remove defconfig support
2013-05-08 juhosgkernel: update linux 3.8 to 3.8.12
2013-05-02 jogobcm63xx: split into two subtargets, generic and SMP
2013-05-02 jogobcm63xx: add SMP support for BCM6362 and BCM6368
2013-05-02 jogobcm63xx: fix hsspi flash registration for BCM6362
2013-05-02 jogobcm63xx: fix/enable livebox minipci
2013-05-01 juhosgkernel: update linux 3.8 to 3.8.11
2013-05-01 florianbrcm63xx: fix typo and missing BCM6328 check in BCM6345...
2013-05-01 florianbrcm63xx: add missing binary operands to BCM6345 ethern...
2013-05-01 florianbrcm63xx: remove 3.7 kernel support
2013-04-30 juhosgkernel: update linux 3.8 to 3.8.10
2013-04-26 juhosgkernel: update linux 3.8 to 3.8.9
2013-04-23 jogobcm63xx: update patches with upstream submissions
2013-04-23 jogobcm63xx: switch to linux 3.8
2013-04-14 juhosgkernel: update linux 3.8 to 3.8.7
2013-03-04 florianbrcm63xx: fix LED names for various boards
2013-03-03 juhosgkernel: update linux 3.7 to 3.7.10
2013-02-21 jogobcm63xx: Fix sysupgrade for tag-version 7 and 8
2013-02-18 florianbrcm63xx: migrate platform to common led helper functions
2013-02-17 juhosgkernel: update linux 3.7 to 3.7.9
2013-02-15 jogobcm63xx: make nvram checksum failures non fatal
2013-02-15 juhosgkernel: update linux 3.7 to 3.7.8
2013-02-12 juhosgkernel: update linux 3.7 to 3.7.7
2013-02-10 jogobcm63xx: handle huawei nvram layout
2013-02-05 florian[brcm63xx] remove support for 3.6 kernel
2013-02-05 florian[brcm63xx] make default version 3.7.6
2013-02-05 florian[brcm63xx] remove superfluous calls to /lib/brcm63xx.sh
2013-02-05 florian[brcm63xx] remove references to the old switch driver
next