lantiq: Move the definition of the xrx200-net node to vr9.dtsi

This removes a lot of duplicate register and interrupt definitions by
moving the xrx200-net definition to vr9.dtsi and making all devices re-
use it.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48547 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/lantiq/dts/ARV7519RW22.dts b/target/linux/lantiq/dts/ARV7519RW22.dts
index dfc7e8f..6f5d356 100644 (file)
--- a/target/linux/lantiq/dts/ARV7519RW22.dts
+++ b/target/linux/lantiq/dts/ARV7519RW22.dts
@@ -72,85 +72,6 @@
                        };
                };
 
-               eth@E108000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,xrx200-net";
-                       reg = < 0xE108000 0x3000 /* switch */
-                               0xE10B100 0x70 /* mdio */
-                               0xE10B1D8 0x30 /* mii */
-                               0xE10B308 0x30 /* pmac */
-                       >;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <73 72>;
-
-                       lan: interface@0 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0>;
-                               mtd-mac-address = <&boardconfig 0x16>;
-                               lantiq,switch;
-
-                               ethernet@0 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <0>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy0>;
-                               };
-                               ethernet@1 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <4>;
-                                       phy-mode = "mii";
-                                       phy-handle = <&phy13>;
-                               };
-                               ethernet@2 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <5>;
-                                       phy-mode = "mii";
-                                       phy-handle = <&phy14>;
-                               };
-                               ethernet@3 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <2>;
-                                       phy-mode = "mii";
-                                       phy-handle = <&phy11>;
-                               };
-                               ethernet@4 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <3>;
-                                       phy-mode = "mii";
-                                       phy-handle = <&phy12>;
-                               };
-                       };
-
-                       mdio@0 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               compatible = "lantiq,xrx200-mdio";
-                               phy0: ethernet-phy@0 {
-                                       reg = <0x0>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy11: ethernet-phy@11 {
-                                       reg = <0x11>;
-                                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy12: ethernet-phy@12 {
-                                       reg = <0x12>;
-                                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy13: ethernet-phy@13 {
-                                       reg = <0x13>;
-                                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy14: ethernet-phy@14 {
-                                       reg = <0x14>;
-                                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-                               };
-                       };
-               };
-
                ifxhcd@E101000 {
                        status = "okay";
                        gpios = <&gpio 32 0>;
@@ -235,3 +156,71 @@
                };
        };
 };
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&boardconfig 0x16>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+               };
+               ethernet@1 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy13>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy14>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <3>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy12>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy12: ethernet-phy@12 {
+                       reg = <0x12>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy14: ethernet-phy@14 {
+                       reg = <0x14>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};

diff --git a/target/linux/lantiq/dts/BTHOMEHUBV5A.dts b/target/linux/lantiq/dts/BTHOMEHUBV5A.dts
index 7656fda..414d4bb 100644 (file)
--- a/target/linux/lantiq/dts/BTHOMEHUBV5A.dts
+++ b/target/linux/lantiq/dts/BTHOMEHUBV5A.dts
@@ -102,96 +102,6 @@
                        };
                };
 
-               eth@E108000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,xrx200-net";
-                       reg = < 0xE108000 0x3000        /* switch */
-                               0xE10B100 0x70          /* mdio */
-                               0xE10B1D8 0x30          /* mii */
-                               0xE10B308 0x30 >;       /* pmac */
-                       interrupt-parent = <&icu0>;
-                       interrupts = <73 72>;
-
-                       lan: interface@0 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0>;
-                               mtd-mac-address = <&caldata 0x110c>;
-                               lantiq,switch;
-
-                               ethernet@0 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <0>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy0>;
-                               };
-                               ethernet@1 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <1>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy1>;
-                               };
-                               ethernet@2 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <2>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy11>;
-                               };
-                               ethernet@4 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <4>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy13>;
-                               };
-                       };
-
-                       wan: interface@1 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <1>;
-                               mtd-mac-address = <&caldata 0x110c>;
-                               mtd-mac-address-increment = <4>;
-                               lantiq,wan;
-
-                               ethernet@5 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <5>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy5>;
-                               };
-                       };
-
-                       mdio@0 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               compatible = "lantiq,xrx200-mdio";
-
-                               phy0: ethernet-phy@0 {
-                                       reg = <0x0>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy1: ethernet-phy@1 {
-                                       reg = <0x1>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy5: ethernet-phy@5 {
-                                       reg = <0x5>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy11: ethernet-phy@11 {
-                                       reg = <0x11>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy13: ethernet-phy@13 {
-                                       reg = <0x13>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                       };
-               };
-
                ifxhcd@E101000 {
                        status = "okay";
                        gpios = <&gpio 33 0>;
@@ -298,3 +208,83 @@
                };
        };
 };
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&caldata 0x110c>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+               };
+               ethernet@1 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <1>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy1>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       wan: interface@1 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <1>;
+               mtd-mac-address = <&caldata 0x110c>;
+               mtd-mac-address-increment = <4>;
+               lantiq,wan;
+
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy1: ethernet-phy@1 {
+                       reg = <0x1>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};

diff --git a/target/linux/lantiq/dts/EASY80920.dtsi b/target/linux/lantiq/dts/EASY80920.dtsi
index ad89ed9..44723a1 100644 (file)
--- a/target/linux/lantiq/dts/EASY80920.dtsi
+++ b/target/linux/lantiq/dts/EASY80920.dtsi
@@ -100,101 +100,6 @@
                        };
                };
 
-               eth@E108000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,xrx200-net";
-                       reg = < 0xE108000 0x3000 /* switch */
-                               0xE10B100 0x70 /* mdio */
-                               0xE10B1D8 0x30 /* mii */
-                               0xE10B308 0x30 /* pmac */
-                       >;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <73 72>;
-
-                       lan: interface@0 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0>;
-                               mac-address = [ 00 11 22 33 44 55 ];
-
-                               ethernet@0 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <0>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy0>;
-                               };
-                               ethernet@1 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <1>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy1>;
-                               };
-                               ethernet@2 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <2>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy11>;
-                               };
-                       };
-
-                       wan: interface@1 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <1>;
-                               mac-address = [ 00 11 22 33 44 56 ];
-                               lantiq,wan;
-                               ethernet@5 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <5>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy5>;
-                               };
-                       };
-
-                       test: interface@2 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <2>;
-                               mac-address = [ 00 11 22 33 44 57 ];
-                               ethernet@4 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <4>;
-                                       phynmode0 = "gmii";
-                                       phy-handle = <&phy13>;
-                               };
-                       };
-
-                       mdio@0 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               compatible = "lantiq,xrx200-mdio";
-                               phy0: ethernet-phy@0 {
-                                       reg = <0x0>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy1: ethernet-phy@1 {
-                                       reg = <0x1>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy5: ethernet-phy@5 {
-                                       reg = <0x5>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy11: ethernet-phy@11 {
-                                       reg = <0x11>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy13: ethernet-phy@13 {
-                                       reg = <0x13>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                       };
-               };
-
                stp: stp@E100BB0 {
                        compatible = "lantiq,gpio-stp-xway";
                        reg = <0xE100BB0 0x40>;
@@ -347,3 +252,87 @@
                };
        };
 };
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mac-address = [ 00 11 22 33 44 55 ];
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+               };
+               ethernet@1 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <1>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy1>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+       };
+
+       wan: interface@1 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <1>;
+               mac-address = [ 00 11 22 33 44 56 ];
+               lantiq,wan;
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+       };
+
+       test: interface@2 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <2>;
+               mac-address = [ 00 11 22 33 44 57 ];
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phynmode0 = "gmii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy1: ethernet-phy@1 {
+                       reg = <0x1>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};

diff --git a/target/linux/lantiq/dts/FRITZ3370.dts b/target/linux/lantiq/dts/FRITZ3370.dts
index 648e36b..aae5283 100644 (file)
--- a/target/linux/lantiq/dts/FRITZ3370.dts
+++ b/target/linux/lantiq/dts/FRITZ3370.dts
@@ -102,77 +102,6 @@
                        };
                };
 
-               eth@E108000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,xrx200-net";
-                       reg = < 0xE108000 0x3000 /* switch */
-                               0xE10B100 0x70 /* mdio */
-                               0xE10B1D8 0x30 /* mii */
-                               0xE10B308 0x30 /* pmac */
-                       >;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <73 72>;
-
-                       lan: interface@0 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0>;
-                               mac-address = [ 00 11 22 33 44 55 ];
-                               lantiq,switch;
-
-                               ethernet@0 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <0>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy0>;
-                                       gpios = <&gpio 37 0>;
-                               };
-                               ethernet@1 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <1>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy1>;
-                                       gpios = <&gpio 44 0>;
-                               };
-                               ethernet@2 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <2>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy11>;
-                               };
-                               ethernet@3 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <4>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy13>;
-                               };
-                       };
-
-                       mdio@0 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               compatible = "lantiq,xrx200-mdio";
-                               phy0: ethernet-phy@0 {
-                                       reg = <0x0>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy1: ethernet-phy@1 {
-                                       reg = <0x1>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy11: ethernet-phy@11 {
-                                       reg = <0x11>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy13: ethernet-phy@13 {
-                                       reg = <0x13>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                       };
-               };
-
                ifxhcd@E101000 {
                        status = "okay";
                        gpios = <&gpio 5 0
@@ -278,3 +207,63 @@
                };
        };
 };
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mac-address = [ 00 11 22 33 44 55 ];
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+                       gpios = <&gpio 37 0>;
+               };
+               ethernet@1 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <1>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy1>;
+                       gpios = <&gpio 44 0>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy1: ethernet-phy@1 {
+                       reg = <0x1>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};

diff --git a/target/linux/lantiq/dts/P2812HNUFX.dtsi b/target/linux/lantiq/dts/P2812HNUFX.dtsi
index 06636a5..e51a2f5 100644 (file)
--- a/target/linux/lantiq/dts/P2812HNUFX.dtsi
+++ b/target/linux/lantiq/dts/P2812HNUFX.dtsi
@@ -117,85 +117,6 @@
                        };
                };
 
-               eth@E108000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,xrx200-net";
-                       reg = < 0xE108000 0x3000        /* switch */
-                               0xE10B100 0x70          /* mdio */
-                               0xE10B1D8 0x30          /* mii */
-                               0xE10B308 0x30 >;       /* pmac */
-                       interrupt-parent = <&icu0>;
-                       interrupts = <73 72>;
-
-                       lan: interface@0 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0>;
-                               mac-address = [ 00 11 22 33 44 55 ];
-                               lantiq,switch;
-
-                               ethernet@0 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <0>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy0>;
-                               };
-                               ethernet@1 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <1>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy1>;
-                               };
-                               ethernet@2 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <2>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy11>;
-                               };
-                               ethernet@4 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <4>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy13>;
-                               };
-                               ethernet@5 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <5>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy5>;
-                               };
-                       };
-
-                       mdio@0 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               compatible = "lantiq,xrx200-mdio";
-
-                               phy0: ethernet-phy@0 {
-                                       reg = <0x0>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy1: ethernet-phy@1 {
-                                       reg = <0x1>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy5: ethernet-phy@5 {
-                                       reg = <0x5>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy11: ethernet-phy@11 {
-                                       reg = <0x11>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy13: ethernet-phy@13 {
-                                       reg = <0x13>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                       };
-               };
-
                stp: stp@E100BB0 {
                        compatible = "lantiq,gpio-stp-xway";
                        reg = <0xE100BB0 0x40>;
@@ -324,3 +245,72 @@
                };
        };
 };
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mac-address = [ 00 11 22 33 44 55 ];
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+               };
+               ethernet@1 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <1>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy1>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy1: ethernet-phy@1 {
+                       reg = <0x1>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};

diff --git a/target/linux/lantiq/dts/TDW89X0.dtsi b/target/linux/lantiq/dts/TDW89X0.dtsi
index b7be27e..312a2d6 100644 (file)
--- a/target/linux/lantiq/dts/TDW89X0.dtsi
+++ b/target/linux/lantiq/dts/TDW89X0.dtsi
@@ -63,76 +63,6 @@
                        };
                };
 
-               eth@E108000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,xrx200-net";
-                       reg = < 0xE108000 0x3000 /* switch */
-                               0xE10B100 0x70 /* mdio */
-                               0xE10B1D8 0x30 /* mii */
-                               0xE10B308 0x30 /* pmac */
-                       >;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <73 72>;
-
-                       lan: interface@0 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0>;
-                               mtd-mac-address = <&ath9k_cal 0xf100>;
-                               lantiq,switch;
-
-                               ethernet@0 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <0>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy0>;
-                                       // gpios = <&gpio 42 1>;
-                               };
-                               ethernet@5 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <5>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy5>;
-                               };
-                               ethernet@2 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <2>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy11>;
-                               };
-                               ethernet@3 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <4>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy13>;
-                               };
-                       };
-
-                       mdio@0 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               compatible = "lantiq,xrx200-mdio";
-                               phy0: ethernet-phy@0 {
-                                       reg = <0x0>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy5: ethernet-phy@5 {
-                                       reg = <0x5>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy11: ethernet-phy@11 {
-                                       reg = <0x11>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy13: ethernet-phy@13 {
-                                       reg = <0x13>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                       };
-               };
-
                ifxhcd@E101000 {
                        status = "okay";
                        gpios = <&gpio 33 0>;
@@ -252,3 +182,62 @@
                };
        };
 };
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&ath9k_cal 0xf100>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+                       // gpios = <&gpio 42 1>;
+               };
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};

diff --git a/target/linux/lantiq/dts/VG3503J.dtsi b/target/linux/lantiq/dts/VG3503J.dtsi
index 243ab0d..a45e90b 100644 (file)
--- a/target/linux/lantiq/dts/VG3503J.dtsi
+++ b/target/linux/lantiq/dts/VG3503J.dtsi
@@ -91,54 +91,6 @@
                                };
                        };
                };
-
-               eth@E108000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,xrx200-net";
-                       reg = < 0xE108000 0x3000 /* switch */
-                               0xE10B100 0x70 /* mdio */
-                               0xE10B1D8 0x30 /* mii */
-                               0xE10B308 0x30 /* pmac */
-                       >;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <73 72>;
-
-                       interface@0 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0>;
-                               mac-address = [ 00 11 22 33 44 55 ];
-                               lantiq,switch;
-                               ethernet@2 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <2>;
-                                       phy-mode = "mii";
-                                       phy-handle = <&phy11>;
-                               };
-                               ethernet@4 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <4>;
-                                       phy-mode = "mii";
-                                       phy-handle = <&phy13>;
-                               };
-                       };
-
-                       mdio@0 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               compatible = "lantiq,xrx200-mdio";
-                               phy11: ethernet-phy@11 {
-                                       reg = <0x11>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy13: ethernet-phy@13 {
-                                       reg = <0x13>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                       };
-               };
        };
 
        gpio-keys-polled {
@@ -171,3 +123,40 @@
                };
        };
 };
+
+&eth0 {
+       interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mac-address = [ 00 11 22 33 44 55 ];
+               lantiq,switch;
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};

diff --git a/target/linux/lantiq/dts/VGV7510KW22.dtsi b/target/linux/lantiq/dts/VGV7510KW22.dtsi
index d8c7bf7..c3722e9 100644 (file)
--- a/target/linux/lantiq/dts/VGV7510KW22.dtsi
+++ b/target/linux/lantiq/dts/VGV7510KW22.dtsi
@@ -80,76 +80,6 @@
                        };
                };
 
-               eth@E108000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,xrx200-net";
-                       reg = < 0xE108000 0x3000 /* switch */
-                               0xE10B100 0x70 /* mdio */
-                               0xE10B1D8 0x30 /* mii */
-                               0xE10B308 0x30 /* pmac */
-                       >;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <73 72>;
-
-                       lan: interface@0 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0>;
-                               mtd-mac-address = <&boardconfig 0x16>;
-                               lantiq,switch;
-
-                               ethernet@2 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <2>;
-                                       phy-mode = "mii";
-                                       phy-handle = <&phy11>;
-                               };
-                               ethernet@3 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <3>;
-                                       phy-mode = "mii";
-                                       phy-handle = <&phy12>;
-                               };
-                               ethernet@4 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <4>;
-                                       phy-mode = "mii";
-                                       phy-handle = <&phy13>;
-                               };
-                               ethernet@5 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <5>;
-                                       phy-mode = "mii";
-                                       phy-handle = <&phy14>;
-                               };
-                       };
-
-                       mdio@0 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               compatible = "lantiq,xrx200-mdio";
-
-                               phy11: ethernet-phy@11 {
-                                       reg = <0x11>;
-                                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy12: ethernet-phy@12 {
-                                       reg = <0x12>;
-                                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy13: ethernet-phy@13 {
-                                       reg = <0x13>;
-                                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy14: ethernet-phy@14 {
-                                       reg = <0x14>;
-                                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-                               };
-                       };
-               };
-
                stp: stp@E100BB0 {
                        compatible = "lantiq,gpio-stp-xway";
                        reg = <0xE100BB0 0x40>;
@@ -265,3 +195,62 @@
                };
        };
 };
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&boardconfig 0x16>;
+               lantiq,switch;
+
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <3>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy12>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy13>;
+               };
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy14>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy12: ethernet-phy@12 {
+                       reg = <0x12>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy14: ethernet-phy@14 {
+                       reg = <0x14>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};

diff --git a/target/linux/lantiq/dts/VGV7519.dtsi b/target/linux/lantiq/dts/VGV7519.dtsi
index 6c79849..4a56114 100644 (file)
--- a/target/linux/lantiq/dts/VGV7519.dtsi
+++ b/target/linux/lantiq/dts/VGV7519.dtsi
@@ -87,98 +87,6 @@
                        };
                };
 
-               eth@E108000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,xrx200-net";
-                       reg = < 0xE108000 0x3000 /* switch */
-                               0xE10B100 0x70 /* mdio */
-                               0xE10B1D8 0x30 /* mii */
-                               0xE10B308 0x30 /* pmac */
-                       >;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <73 72>;
-
-                       lan: interface@0 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0>;
-                               mac-address = [ 00 11 22 33 44 55 ];
-
-                               ethernet@0 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <0>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy0>;
-                               };
-                               ethernet@1 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <1>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy1>;
-                               };
-                               ethernet@2 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <2>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy11>;
-                               };
-                               ethernet@4 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <4>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy13>;
-                               };
-                       };
-
-                       wan: interface@1 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <1>;
-                               mac-address = [ 00 11 22 33 44 56 ];
-                               lantiq,wan;
-                               ethernet@5 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <5>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy5>;
-                               };
-                       };
-
-                       mdio@0 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               compatible = "lantiq,xrx200-mdio";
-                               phy0: ethernet-phy@0 {
-                                       reg = <0x0>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                                       lantiq,c45-reg-init = <1 0 0 0>; 
-                               };
-                               phy1: ethernet-phy@1 {
-                                       reg = <0x1>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                                       lantiq,c45-reg-init = <1 0 0 0>; 
-                               };
-                               phy5: ethernet-phy@5 {
-                                       reg = <0x5>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                                       lantiq,c45-reg-init = <1 0 0 0>; 
-                               };
-                               phy11: ethernet-phy@11 {
-                                       reg = <0x11>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                                       lantiq,c45-reg-init = <1 0 0 0>; 
-                               };
-                               phy13: ethernet-phy@13 {
-                                       reg = <0x13>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                                       lantiq,c45-reg-init = <1 0 0 0>; 
-                               };
-                       };
-               };
-
                stp: stp@E100BB0 {
                        compatible = "lantiq,gpio-stp-xway";
                        reg = <0xE100BB0 0x40>;
@@ -328,3 +236,84 @@
                };
        };
 };
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mac-address = [ 00 11 22 33 44 55 ];
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+               };
+               ethernet@1 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <1>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy1>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       wan: interface@1 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <1>;
+               mac-address = [ 00 11 22 33 44 56 ];
+               lantiq,wan;
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                       lantiq,c45-reg-init = <1 0 0 0>;
+               };
+               phy1: ethernet-phy@1 {
+                       reg = <0x1>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                       lantiq,c45-reg-init = <1 0 0 0>;
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                       lantiq,c45-reg-init = <1 0 0 0>;
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                       lantiq,c45-reg-init = <1 0 0 0>;
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                       lantiq,c45-reg-init = <1 0 0 0>;
+               };
+       };
+};

diff --git a/target/linux/lantiq/dts/VR200v.dts b/target/linux/lantiq/dts/VR200v.dts
index 9cf306c..fb01d7f 100644 (file)
--- a/target/linux/lantiq/dts/VR200v.dts
+++ b/target/linux/lantiq/dts/VR200v.dts
@@ -66,76 +66,6 @@
                        };
                };
 
-               eth@E108000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,xrx200-net";
-                       reg = < 0xE108000 0x3000 /* switch */
-                               0xE10B100 0x70 /* mdio */
-                               0xE10B1D8 0x30 /* mii */
-                               0xE10B308 0x30 /* pmac */
-                       >;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <73 72>;
-
-                       lan: interface@0 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0>;
-                               mtd-mac-address = <&romfile 0xf100>;
-                               lantiq,switch;
-
-                               ethernet@0 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <0>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy0>;
-                                       // gpios = <&gpio 42 1>;
-                               };
-                               ethernet@5 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <5>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy5>;
-                               };
-                               ethernet@2 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <2>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy11>;
-                               };
-                               ethernet@3 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <4>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy13>;
-                               };
-                       };
-
-                       mdio@0 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               compatible = "lantiq,xrx200-mdio";
-                               phy0: ethernet-phy@0 {
-                                       reg = <0x0>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy5: ethernet-phy@5 {
-                                       reg = <0x5>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy11: ethernet-phy@11 {
-                                       reg = <0x11>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy13: ethernet-phy@13 {
-                                       reg = <0x13>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                       };
-               };
-
                ifxhcd@E101000 {
                        status = "okay";
                        gpios = <&gpio 33 0>;
@@ -278,3 +208,62 @@
                };
        };
 };
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               mtd-mac-address = <&romfile 0xf100>;
+               lantiq,switch;
+
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy0>;
+                       // gpios = <&gpio 42 1>;
+               };
+               ethernet@5 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "rgmii";
+                       phy-handle = <&phy5>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "gmii";
+                       phy-handle = <&phy13>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               phy0: ethernet-phy@0 {
+                       reg = <0x0>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <0x5>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};

diff --git a/target/linux/lantiq/dts/vr9.dtsi b/target/linux/lantiq/dts/vr9.dtsi
index fce6f87..aa34a5f 100644 (file)
--- a/target/linux/lantiq/dts/vr9.dtsi
+++ b/target/linux/lantiq/dts/vr9.dtsi
@@ -170,6 +170,19 @@
                        interrupts = <91>;
                };
 
+               eth0: eth@E108000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "lantiq,xrx200-net";
+                       reg = < 0xE108000 0x3000 /* switch */
+                               0xE10B100 0x70 /* mdio */
+                               0xE10B1D8 0x30 /* mii */
+                               0xE10B308 0x30 /* pmac */
+                       >;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <73 72>;
+               };
+
                mei@E116000 {
                        compatible = "lantiq,mei-xrx200";
                        reg = <0xE116000 0x9c>;