target/linux/sunxi/patches-4.1/171-musb-add-support-for-a31.patch

   1 From 132e23775779cc895c37f7883c33a60a1a8a7cdd Mon Sep 17 00:00:00 2001
   2 From: Hans de Goede <hdegoede@redhat.com>
   3 Date: Wed, 8 Jul 2015 16:41:39 +0200
   4 Subject: [PATCH] usb: musb: sunxi: Add support for musb controller in A31 SoC
   5
   6 The A31 SoC uses the same musb controller as found in earlier SoCs, but it
   7 is hooked up slightly different. Its SRAM is private and no longer controlled
   8 through the SRAM controller, and its reset is controlled via a separate
   9 reset controller. This commit adds support for this setup.
  10
  11 Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  12 Signed-off-by: Felipe Balbi <balbi@ti.com>
  13 ---
  14  .../bindings/usb/allwinner,sun4i-a10-musb.txt      |  3 +-
  15  drivers/usb/musb/sunxi.c                           | 50 +++++++++++++++++++---
  16  2 files changed, 46 insertions(+), 7 deletions(-)
  17
  18 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
  19 +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
  20 @@ -2,9 +2,10 @@ Allwinner sun4i A10 musb DRC/OTG control
  21  -------------------------------------------
  22
  23  Required properties:
  24 - - compatible      : "allwinner,sun4i-a10-musb"
  25 + - compatible      : "allwinner,sun4i-a10-musb" or "allwinner,sun6i-a31-musb"
  26   - reg             : mmio address range of the musb controller
  27   - clocks          : clock specifier for the musb controller ahb gate clock
  28 + - reset           : reset specifier for the ahb reset (A31 and newer only)
  29   - interrupts      : interrupt to which the musb controller is connected
  30   - interrupt-names : must be "mc"
  31   - phys            : phy specifier for the otg phy
  32 --- a/drivers/usb/musb/sunxi.c
  33 +++ b/drivers/usb/musb/sunxi.c
  34 @@ -26,6 +26,7 @@
  35  #include <linux/of.h>
  36  #include <linux/phy/phy-sun4i-usb.h>
  37  #include <linux/platform_device.h>
  38 +#include <linux/reset.h>
  39  #include <linux/soc/sunxi/sunxi_sram.h>
  40  #include <linux/usb/musb.h>
  41  #include <linux/usb/of.h>
  42 @@ -70,6 +71,8 @@
  43  #define SUNXI_MUSB_FL_HOSTMODE_PEND            2
  44  #define SUNXI_MUSB_FL_VBUS_ON                  3
  45  #define SUNXI_MUSB_FL_PHY_ON                   4
  46 +#define SUNXI_MUSB_FL_HAS_SRAM                 5
  47 +#define SUNXI_MUSB_FL_HAS_RESET                        6
  48
  49  /* Our read/write methods need access and do not get passed in a musb ref :| */
  50  static struct musb *sunxi_musb;
  51 @@ -78,6 +81,7 @@ struct sunxi_glue {
  52         struct device           *dev;
  53         struct platform_device  *musb;
  54         struct clk              *clk;
  55 +       struct reset_control    *rst;
  56         struct phy              *phy;
  57         struct platform_device  *usb_phy;
  58         struct usb_phy          *xceiv;
  59 @@ -229,14 +233,22 @@ static int sunxi_musb_init(struct musb *
  60         musb->phy = glue->phy;
  61         musb->xceiv = glue->xceiv;
  62
  63 -       ret = sunxi_sram_claim(musb->controller->parent);
  64 -       if (ret)
  65 -               return ret;
  66 +       if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) {
  67 +               ret = sunxi_sram_claim(musb->controller->parent);
  68 +               if (ret)
  69 +                       return ret;
  70 +       }
  71
  72         ret = clk_prepare_enable(glue->clk);
  73         if (ret)
  74                 goto error_sram_release;
  75
  76 +       if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) {
  77 +               ret = reset_control_deassert(glue->rst);
  78 +               if (ret)
  79 +                       goto error_clk_disable;
  80 +       }
  81 +
  82         writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0);
  83
  84         /* Register notifier before calling phy_init() */
  85 @@ -244,7 +256,7 @@ static int sunxi_musb_init(struct musb *
  86                 ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST,
  87                                                &glue->host_nb);
  88                 if (ret)
  89 -                       goto error_clk_disable;
  90 +                       goto error_reset_assert;
  91         }
  92
  93         ret = phy_init(glue->phy);
  94 @@ -273,10 +285,14 @@ error_unregister_notifier:
  95         if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
  96                 extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
  97                                            &glue->host_nb);
  98 +error_reset_assert:
  99 +       if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags))
 100 +               reset_control_assert(glue->rst);
 101  error_clk_disable:
 102         clk_disable_unprepare(glue->clk);
 103  error_sram_release:
 104 -       sunxi_sram_release(musb->controller->parent);
 105 +       if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags))
 106 +               sunxi_sram_release(musb->controller->parent);
 107         return ret;
 108  }
 109
 110 @@ -296,8 +312,12 @@ static int sunxi_musb_exit(struct musb *
 111                 extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
 112                                            &glue->host_nb);
 113
 114 +       if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags))
 115 +               reset_control_assert(glue->rst);
 116 +
 117         clk_disable_unprepare(glue->clk);
 118 -       sunxi_sram_release(musb->controller->parent);
 119 +       if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags))
 120 +               sunxi_sram_release(musb->controller->parent);
 121
 122         return 0;
 123  }
 124 @@ -617,6 +637,12 @@ static int sunxi_musb_probe(struct platf
 125         INIT_WORK(&glue->work, sunxi_musb_work);
 126         glue->host_nb.notifier_call = sunxi_musb_host_notifier;
 127
 128 +       if (of_device_is_compatible(np, "allwinner,sun4i-a10-musb"))
 129 +               set_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags);
 130 +
 131 +       if (of_device_is_compatible(np, "allwinner,sun6i-a31-musb"))
 132 +               set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags);
 133 +
 134         glue->clk = devm_clk_get(&pdev->dev, NULL);
 135         if (IS_ERR(glue->clk)) {
 136                 dev_err(&pdev->dev, "Error getting clock: %ld\n",
 137 @@ -624,6 +650,17 @@ static int sunxi_musb_probe(struct platf
 138                 return PTR_ERR(glue->clk);
 139         }
 140
 141 +       if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) {
 142 +               glue->rst = devm_reset_control_get(&pdev->dev, NULL);
 143 +               if (IS_ERR(glue->rst)) {
 144 +                       if (PTR_ERR(glue->rst) == -EPROBE_DEFER)
 145 +                               return -EPROBE_DEFER;
 146 +                       dev_err(&pdev->dev, "Error getting reset %ld\n",
 147 +                               PTR_ERR(glue->rst));
 148 +                       return PTR_ERR(glue->rst);
 149 +               }
 150 +       }
 151 +
 152         glue->phy = devm_phy_get(&pdev->dev, "usb");
 153         if (IS_ERR(glue->phy)) {
 154                 if (PTR_ERR(glue->phy) == -EPROBE_DEFER)
 155 @@ -685,6 +722,7 @@ static int sunxi_musb_remove(struct plat
 156
 157  static const struct of_device_id sunxi_musb_match[] = {
 158         { .compatible = "allwinner,sun4i-a10-musb", },
 159 +       { .compatible = "allwinner,sun6i-a31-musb", },
 160         {}
 161  };
 162