target/linux/ramips/dts/WLI-TX4-AG300N.dts

   1 /dts-v1/;
   2
   3 /include/ "rt2880.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
   9         model = "Buffalo WLI-TX4-AG300N";
  10
  11         palmbus@300000 {
  12                 sysc@0 {
  13                         ralink,pinmux = "uartlite";
  14                         ralink,uartmux = "gpio";
  15                         ralink,wdtmux = <1>;
  16                 };
  17
  18                 gpio0: gpio@600 {
  19                         status = "okay";
  20                 };
  21         };
  22
  23         cfi@1f000000 {
  24                 compatible = "cfi-flash";
  25                 reg = <0x1f000000 0x800000>;
  26
  27                 bank-width = <2>;
  28                 device-width = <2>;
  29                 #address-cells = <1>;
  30                 #size-cells = <1>;
  31
  32                 partition@0 {
  33                         label = "uboot";
  34                         reg = <0x0 0x30000>;
  35                         read-only;
  36                 };
  37                 partition@30000 {
  38                         label = "uboot-env";
  39                         reg = <0x30000 0x10000>;
  40                         read-only;
  41                 };
  42                 partition@40000 {
  43                         label = "calibration";
  44                         reg = <0x40000 0x10000>;
  45                         read-only;
  46                 };
  47                 partition@50000 {
  48                         label = "linux";
  49                         reg = <0x50000 0x3b0000>;
  50                 };
  51         };
  52
  53         ethernet@400000 {
  54                 status = "okay";
  55
  56                 port@0 {
  57                         ralink,fixed-link = <1000 1 1 1>;
  58                 };
  59         };
  60
  61         gpio-keys-polled {
  62                 compatible = "gpio-keys-polled";
  63                 #address-cells = <1>;
  64                 #size-cells = <0>;
  65                 poll-interval = <100>;
  66                 wps {
  67                         label = "wps";
  68                         gpios = <&gpio0 0 1>;
  69                         linux,code = <0x211>;
  70                 };
  71                 bandwidth {
  72                         label = "bandwidth";
  73                         gpios = <&gpio0 8 0>;
  74                         linux,code = <0x198>;
  75                 };
  76                 reset {
  77                         label = "reset";
  78                         gpios = <&gpio0 9 1>;
  79                         linux,code = <0x198>;
  80                 };
  81         };
  82
  83         gpio-leds {
  84                 compatible = "gpio-leds";
  85
  86                 diag {
  87                         label = "buffalo:red:diag";
  88                         gpios = <&gpio0 10 1>;
  89                 };
  90                 power {
  91                         label = "buffalo:blue:power";
  92                         gpios = <&gpio0 12 1>;
  93                 };
  94                 security {
  95                         label = "buffalo:blue:security";
  96                         gpios = <&gpio0 13 1>;
  97                 };
  98         };
  99 };