target/linux/ramips/dts/RT-G32-B1.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "RT-G32-B1", "ralink,rt3050-soc";
   9         model = "Asus RT-G32 B1";
  10
  11         memorydetect {
  12                 ralink,memory = <0x0 0x200000 0x4000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "mtdparts=spi0.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
  17         };
  18
  19         palmbus@10000000 {
  20                 sysc@0 {
  21                         ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  22                         ralink,uartmux = "gpio";
  23                         ralink,wdtmux = <1>;
  24                 };
  25
  26                 gpio0: gpio@600 {
  27                         status = "okay";
  28                 };
  29
  30                 spi@b00 {
  31                         status = "okay";
  32                         m25p80@0 {
  33                                 #address-cells = <1>;
  34                                 #size-cells = <1>;
  35                                 compatible = "mx25l3205d";
  36                                 reg = <0 0>;
  37                                 linux,modalias = "m25p80", "mx25l3205d";
  38                                 spi-max-frequency = <10000000>;
  39                         };
  40                 };
  41         };
  42
  43         ethernet@10100000 {
  44                 status = "okay";
  45         };
  46
  47         esw@10110000 {
  48                 status = "okay";
  49                 ralink,portmap = <0x2f>;
  50         };
  51
  52         gpio-keys-polled {
  53                 compatible = "gpio-keys-polled";
  54                 #address-cells = <1>;
  55                 #size-cells = <0>;
  56                 poll-interval = <20>;
  57                 reset {
  58                         label = "reset";
  59                         gpios = <&gpio0 10 1>;
  60                         linux,code = <0x198>;
  61                 };
  62                 wps {
  63                         label = "wps";
  64                         gpios = <&gpio0 0 1>;
  65                         linux,code = <0x211>;
  66                 };
  67         };
  68
  69         wmac@10180000 {
  70                 status = "okay";
  71         };
  72 };