target/linux/ramips/dts/MZK-W300NH2.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "MZK-W300NH2", "ralink,rt3052-soc";
   7         model = "Planex MZK-W300NH2";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)";
  15         };
  16
  17         palmbus@10000000 {
  18                 sysc@0 {
  19                         ralink,pinmux = "uartlite", "mdio", "sdram", "rgmii";
  20                         ralink,gpiomux = "i2c", "spi", "jtag";
  21                         ralink,uartmux = "gpio";
  22                         ralink,wdtmux = <1>;
  23                 };
  24
  25                 gpio0: gpio@600 {
  26                         status = "okay";
  27                 };
  28         };
  29
  30         cfi@1f000000 {
  31                 compatible = "cfi-flash";
  32                 reg = <0x1f000000 0x800000>;
  33
  34                 bank-width = <2>;
  35                 device-width = <2>;
  36                 #address-cells = <1>;
  37                 #size-cells = <1>;
  38         };
  39
  40         ethernet@10100000 {
  41                 status = "okay";
  42         };
  43
  44         esw@10110000 {
  45                 status = "okay";
  46                 ralink,portmap = <0x2f>;
  47         };
  48
  49         gpio-leds {
  50                 compatible = "gpio-leds";
  51                 power {
  52                         label = "mzkw300nh2:green:power";
  53                         gpios = <&gpio0 9 1>;
  54                 };
  55                 wlan {
  56                         label = "mzkw300nh2:amber:wlan";
  57                         gpios = <&gpio0 14 1>;
  58                 };
  59                 wps {
  60                         label = "mzkw300nh2:amber:wps";
  61                         gpios = <&gpio0 11 1>;
  62                 };
  63         };
  64
  65         gpio-keys-polled {
  66                 compatible = "gpio-keys-polled";
  67                 #address-cells = <1>;
  68                 #size-cells = <0>;
  69                 poll-interval = <20>;
  70                 wps {
  71                         label = "wps";
  72                         gpios = <&gpio0 12 1>;
  73                         linux,code = <0x211>;
  74                 };
  75                 reset {
  76                         label = "reset";
  77                         gpios = <&gpio0 0 1>;
  78                         linux,code = <0x198>;
  79                 };
  80                 rt {
  81                         label = "rt";
  82                         gpios = <&gpio0 13 1>;
  83                         linux,code = <0x100>;
  84                 };
  85         };
  86
  87         wmac@10180000 {
  88                 status = "okay";
  89         };
  90 };