target/linux/ramips/dts/ARGUS_ATP52B.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "ARGUS_ATP52B", "ralink,rt3052-soc";
   7         model = "Argus ATP-52B";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         palmbus@10000000 {
  14                 sysc@0 {
  15                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  16                         ralink,uartmux = "gpio";
  17                         ralink,wdtmux = <1>;
  18                 };
  19
  20                 gpio0: gpio@600 {
  21                         status = "okay";
  22                 };
  23
  24         };
  25
  26         cfi@1f000000 {
  27                 compatible = "cfi-flash";
  28                 reg = <0x1f000000 0x800000>;
  29
  30                 bank-width = <2>;
  31                 device-width = <2>;
  32                 #address-cells = <1>;
  33                 #size-cells = <1>;
  34
  35                 partition@0 {
  36                         label = "bootloader";
  37                         reg = <0x0 0x30000>;
  38                         read-only;
  39                 };
  40
  41                 partition@30000 {
  42                         label = "config";
  43                         reg = <0x30000 0x10000>;
  44                 };
  45
  46                 factory: partition@40000 {
  47                         label = "factory";
  48                         reg = <0x40000 0x10000>;
  49                 };
  50
  51                 partition@50000 {
  52                         label = "firmware";
  53                         reg = <0x50000 0x7a0000>;
  54                 };
  55         };
  56
  57         gpio-leds {
  58                 compatible = "gpio-leds";
  59                 run {
  60                         label = "argus-atp52b:green:run";
  61                         gpios = <&gpio0 9 1>;
  62                 };
  63                 net {
  64                         label = "argus-atp52b:amber:net";
  65                         gpios = <&gpio0 13 1>;
  66                 };
  67         };
  68
  69         gpio-keys-polled {
  70                 compatible = "gpio-keys-polled";
  71                 #address-cells = <1>;
  72                 #size-cells = <0>;
  73                 poll-interval = <20>;
  74                 wps {
  75                         label = "wps";
  76                         gpios = <&gpio0 0 1>;
  77                         linux,code = <0x211>;
  78                 };
  79                 reset {
  80                         label = "reset";
  81                         gpios = <&gpio0 10 1>;
  82                         linux,code = <0x198>;
  83                 };
  84         };
  85
  86         ethernet@10100000 {
  87                 status = "okay";
  88         };
  89
  90         esw@10110000 {
  91                 status = "okay";
  92                 ralink,portmap = <0x3e>;
  93         };
  94
  95         wmac@10180000 {
  96                 status = "okay";
  97         };
  98
  99         otg@101c0000 {
 100                 status = "okay";
 101         };
 102 };