target/linux/lantiq/patches-3.3/206-machtypes.patch

   1 --- a/arch/mips/lantiq/machtypes.h
   2 +++ b/arch/mips/lantiq/machtypes.h
   3 @@ -20,6 +20,39 @@ enum lantiq_mach_type {
   4         LANTIQ_MACH_EASY98000,          /* Falcon Eval Board, NOR Flash */
   5         LANTIQ_MACH_EASY98000SF,        /* Falcon Eval Board, Serial Flash */
   6         LANTIQ_MACH_EASY98000NAND,      /* Falcon Eval Board, NAND Flash */
   7 +       LANTIQ_MACH_EASY98020,          /* EASY98020 Eval Board */
   8 +       LANTIQ_MACH_EASY98020_1LAN,     /* EASY98020 Eval Board (1 LAN port) */
   9 +       LANTIQ_MACH_EASY98020_2LAN,     /* EASY98020 Eval Board (2 LAN port) */
  10 +       LANTIQ_MACH_95C3AM1,            /* 95C3AM1 Eval Board */
  11 +
  12 +       /* Arcadyan */
  13 +       LANTIQ_MACH_ARV3527P,           /* Arcor easybox a401 */
  14 +       LANTIQ_MACH_ARV4510PW,          /* Wippies Homebox */
  15 +       LANTIQ_MACH_ARV4518PW,          /* Airties WAV-221, SMC-7908A-ISP */
  16 +       LANTIQ_MACH_ARV4519PW,          /* Vodafone, Pirelli */
  17 +       LANTIQ_MACH_ARV4520PW,          /* Airties WAV-281, Arcor EasyboxA800 */
  18 +       LANTIQ_MACH_ARV452CPW,          /* Arcor EasyboxA801 */
  19 +       LANTIQ_MACH_ARV4525PW,          /* Speedport W502V */
  20 +       LANTIQ_MACH_ARV7525PW,          /* Speedport W303V */
  21 +       LANTIQ_MACH_ARV752DPW,          /* Arcor easybox a802 */
  22 +       LANTIQ_MACH_ARV752DPW22,        /* Arcor easybox a803 */
  23 +       LANTIQ_MACH_ARV7518PW,          /* ASTORIA */
  24 +
  25 +       /* Netgear */
  26 +       LANTIQ_MACH_DGN3500B,           /* Netgear DGN3500 */
  27 +
  28 +       /* FRITZ!BOX */
  29 +       LANTIQ_MACH_FRITZ3370,          /* FRITZ!BOX 3370 vdsl cpe */
  30 +       LANTIQ_MACH_FRITZ7320,          /* FRITZ!BOX 7320 1&1 homeserver */
  31 +
  32 +       /* Gigaset */
  33 +       LANTIQ_MACH_GIGASX76X,          /* Gigaset SX76x */
  34 +
  35 +       /* Buffalo */
  36 +       LANTIQ_MACH_WBMR,               /* WBMR-HP-G300H */
  37 +
  38 +       /* ZyXEL */
  39 +       LANTIQ_MACH_P2601HNFX,          /* ZyXEL P-2601HN-Fx */
  40  };
  41
  42  #endif
  43 --- a/arch/mips/lantiq/xway/Kconfig
  44 +++ b/arch/mips/lantiq/xway/Kconfig
  45 @@ -6,6 +6,34 @@ config LANTIQ_MACH_EASY50712
  46         bool "Easy50712 - Danube"
  47         default y
  48
  49 +config LANTIQ_MACH_ARV
  50 +       bool "ARV"
  51 +       default y
  52 +
  53 +config LANTIQ_MACH_NETGEAR
  54 +       bool "Netgear"
  55 +       default y
  56 +
  57 +config LANTIQ_MACH_GIGASX76X
  58 +       bool "GIGASX76X"
  59 +       default y
  60 +
  61 +config LANTIQ_MACH_WBMR
  62 +       bool "WBMR-HP-G300H"
  63 +       default y
  64 +
  65 +config LANTIQ_MACH_P2601HNFX
  66 +       bool "P2601HNFX"
  67 +       default y
  68 +
  69 +config LANTIQ_MACH_FRITZ_VR9
  70 +       bool "FRITZ3370"
  71 +       default y
  72 +
  73 +config LANTIQ_MACH_FRITZ_AR9
  74 +       bool "FRITZ7320"
  75 +       default y
  76 +
  77  endmenu
  78
  79  choice
  80 --- a/arch/mips/lantiq/xway/Makefile
  81 +++ b/arch/mips/lantiq/xway/Makefile
  82 @@ -2,3 +2,10 @@ obj-y := sysctrl.o reset.o gpio.o gpio_s
  83
  84  obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
  85  obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
  86 +obj-$(CONFIG_LANTIQ_MACH_ARV) += mach-arv.o
  87 +obj-$(CONFIG_LANTIQ_MACH_FRITZ_AR9) += mach-fritz_ar9.o
  88 +obj-$(CONFIG_LANTIQ_MACH_FRITZ_VR9) += mach-fritz_vr9.o
  89 +obj-$(CONFIG_LANTIQ_MACH_GIGASX76X) += mach-gigasx76x.o
  90 +obj-$(CONFIG_LANTIQ_MACH_NETGEAR) += mach-netgear.o
  91 +obj-$(CONFIG_LANTIQ_MACH_WBMR) += mach-wbmr.o
  92 +obj-$(CONFIG_LANTIQ_MACH_P2601HNFX) += mach-p2601hnfx.o
  93 --- a/arch/mips/lantiq/falcon/Kconfig
  94 +++ b/arch/mips/lantiq/falcon/Kconfig
  95 @@ -6,6 +6,14 @@ config LANTIQ_MACH_EASY98000
  96         bool "Easy98000"
  97         default y
  98
  99 +config LANTIQ_MACH_EASY98020
 100 +       bool "Easy98020"
 101 +       default y
 102 +
 103 +config LANTIQ_MACH_95C3AM1
 104 +       bool "95C3AM1"
 105 +       default y
 106 +
 107  endmenu
 108
 109  endif
 110 --- a/arch/mips/lantiq/falcon/Makefile
 111 +++ b/arch/mips/lantiq/falcon/Makefile
 112 @@ -1,2 +1,6 @@
 113  obj-y := prom.o reset.o sysctrl.o devices.o gpio.o
 114 +obj-$(CONFIG_LANTIQ_MACH_EASY98000) += addon-easy98000.o
 115 +obj-$(CONFIG_LANTIQ_MACH_EASY98000) += dev-leds-easy98000-cpld.o
 116  obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
 117 +obj-$(CONFIG_LANTIQ_MACH_EASY98020) += mach-easy98020.o
 118 +obj-$(CONFIG_LANTIQ_MACH_95C3AM1)   += mach-95C3AM1.o
 119 --- a/arch/mips/lantiq/falcon/mach-easy98000.c
 120 +++ b/arch/mips/lantiq/falcon/mach-easy98000.c
 121 @@ -1,23 +1,38 @@
 122 -/*
 123 - *  This program is free software; you can redistribute it and/or modify it
 124 - *  under the terms of the GNU General Public License version 2 as published
 125 - *  by the Free Software Foundation.
 126 - *
 127 - *  Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
 128 - *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
 129 - */
 130 -
 131 +#include <linux/init.h>
 132  #include <linux/platform_device.h>
 133 +#include <linux/leds.h>
 134 +#include <linux/gpio.h>
 135 +#include <linux/gpio_buttons.h>
 136 +#include <linux/etherdevice.h>
 137 +#include <linux/mtd/mtd.h>
 138  #include <linux/mtd/partitions.h>
 139 +#include <linux/mtd/physmap.h>
 140 +#include <linux/input.h>
 141 +#include <linux/interrupt.h>
 142 +#include <linux/dm9000.h>
 143 +#include <linux/i2c.h>
 144 +#include <linux/i2c-gpio.h>
 145  #include <linux/spi/spi.h>
 146  #include <linux/spi/spi_gpio.h>
 147  #include <linux/spi/eeprom.h>
 148 +#include <falcon/lantiq_soc.h>
 149
 150  #include "../machtypes.h"
 151
 152  #include "devices.h"
 153 +#include "dev-leds-gpio.h"
 154 +
 155 +#define EASY98000_GPIO_LED_0 9
 156 +#define EASY98000_GPIO_LED_1 10
 157 +#define EASY98000_GPIO_LED_2 11
 158 +#define EASY98000_GPIO_LED_3 12
 159 +#define EASY98000_GPIO_LED_4 13
 160 +#define EASY98000_GPIO_LED_5 14
 161
 162 -static struct mtd_partition easy98000_nor_partitions[] = {
 163 +extern unsigned char ltq_ethaddr[6];
 164 +
 165 +static struct mtd_partition easy98000_nor_partitions[] =
 166 +{
 167         {
 168                 .name   = "uboot",
 169                 .offset = 0x0,
 170 @@ -35,7 +50,7 @@ static struct mtd_partition easy98000_no
 171         },
 172  };
 173
 174 -struct physmap_flash_data easy98000_nor_flash_data = {
 175 +static struct physmap_flash_data easy98000_nor_flash_data = {
 176         .nr_parts       = ARRAY_SIZE(easy98000_nor_partitions),
 177         .parts          = easy98000_nor_partitions,
 178  };
 179 @@ -55,12 +70,105 @@ static struct spi_board_info easy98000_s
 180         .platform_data          = &easy98000_spi_flash_platform_data
 181  };
 182
 183 +static struct gpio_led easy98000_leds_gpio[] __initdata = {
 184 +       {
 185 +               .name           = "easy98000:green:0",
 186 +               .gpio           = EASY98000_GPIO_LED_0,
 187 +               .active_low     = 0,
 188 +       }, {
 189 +               .name           = "easy98000:green:1",
 190 +               .gpio           = EASY98000_GPIO_LED_1,
 191 +               .active_low     = 0,
 192 +       }, {
 193 +               .name           = "easy98000:green:2",
 194 +               .gpio           = EASY98000_GPIO_LED_2,
 195 +               .active_low     = 0,
 196 +       }, {
 197 +               .name           = "easy98000:green:3",
 198 +               .gpio           = EASY98000_GPIO_LED_3,
 199 +               .active_low     = 0,
 200 +       }, {
 201 +               .name           = "easy98000:green:4",
 202 +               .gpio           = EASY98000_GPIO_LED_4,
 203 +               .active_low     = 0,
 204 +       }, {
 205 +               .name           = "easy98000:green:5",
 206 +               .gpio           = EASY98000_GPIO_LED_5,
 207 +               .active_low     = 0,
 208 +       }
 209 +};
 210 +
 211 +#define CONFIG_DM9000_BASE             0x14000000
 212 +#define DM9000_IO                      (CONFIG_DM9000_BASE + 3)
 213 +#define DM9000_DATA                    (CONFIG_DM9000_BASE + 1)
 214 +
 215 +static struct dm9000_plat_data dm9000_plat_data = {
 216 +       .flags = DM9000_PLATF_8BITONLY,
 217 +       //.dev_addr = { }, /* possibility to provide an ethernet address for the chip */
 218 +};
 219 +
 220 +static struct resource dm9000_resources[] = {
 221 +       MEM_RES("dm9000_io", DM9000_IO, DM9000_IO),
 222 +       MEM_RES("dm9000_data", DM9000_DATA, DM9000_DATA),
 223 +       [2] = {
 224 +               /* with irq (210 -> gpio 110) the driver is very unreliable */
 225 +               .start  = -1,           /* use polling */
 226 +               .end    = -1,
 227 +               .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 228 +       },
 229 +};
 230 +
 231 +static struct platform_device dm9000_platform = {
 232 +       .name = "dm9000",
 233 +       .id = 0,
 234 +       .num_resources  = ARRAY_SIZE(dm9000_resources),
 235 +       .resource       = dm9000_resources,
 236 +       .dev = {
 237 +               .platform_data = (void *) &dm9000_plat_data,
 238 +       }
 239 +};
 240 +
 241 +extern int easy98000_addon_has_dm9000(void);
 242 +static void __init register_davicom(void)
 243 +{
 244 +       if (!easy98000_addon_has_dm9000())
 245 +               return;
 246 +
 247 +       if (!is_valid_ether_addr(ltq_ethaddr))
 248 +               random_ether_addr(dm9000_plat_data.dev_addr);
 249 +       else {
 250 +               memcpy(dm9000_plat_data.dev_addr, ltq_ethaddr, 6);
 251 +               /* change to "Locally Administered Address" */
 252 +               dm9000_plat_data.dev_addr[0] |= 0x2;
 253 +       }
 254 +       platform_device_register(&dm9000_platform);
 255 +}
 256 +
 257 +static struct i2c_gpio_platform_data easy98000_i2c_gpio_data = {
 258 +       .sda_pin        = 107,
 259 +       .scl_pin        = 108,
 260 +};
 261 +
 262 +static struct platform_device easy98000_i2c_gpio_device = {
 263 +       .name           = "i2c-gpio",
 264 +       .id             = 0,
 265 +       .dev = {
 266 +               .platform_data  = &easy98000_i2c_gpio_data,
 267 +       }
 268 +};
 269 +
 270 +void __init register_easy98000_cpld(void)
 271 +{
 272 +       platform_device_register_simple("easy98000_cpld_led", 0, NULL, 0);
 273 +       platform_device_register_simple("easy98000_addon", 0, NULL, 0);
 274 +}
 275 +
 276  /* setup gpio based spi bus/device for access to the eeprom on the board */
 277 -#define SPI_GPIO_MRST          102
 278 -#define SPI_GPIO_MTSR          103
 279 -#define SPI_GPIO_CLK           104
 280 -#define SPI_GPIO_CS0           105
 281 -#define SPI_GPIO_CS1           106
 282 +#define SPI_GPIO_MRST  102
 283 +#define SPI_GPIO_MTSR  103
 284 +#define SPI_GPIO_CLK   104
 285 +#define SPI_GPIO_CS0   105
 286 +#define SPI_GPIO_CS1   106
 287  #define SPI_GPIO_BUS_NUM       1
 288
 289  static struct spi_gpio_platform_data easy98000_spi_gpio_data = {
 290 @@ -94,11 +202,22 @@ static struct spi_board_info easy98000_s
 291  };
 292
 293  static void __init
 294 -easy98000_init_common(void)
 295 +easy98000_spi_gpio_init(void)
 296  {
 297         spi_register_board_info(&easy98000_spi_gpio_devices, 1);
 298         platform_device_register(&easy98000_spi_gpio_device);
 299 +}
 300 +
 301 +static void __init
 302 +easy98000_init_common(void)
 303 +{
 304         falcon_register_i2c();
 305 +       platform_device_register(&easy98000_i2c_gpio_device);
 306 +       register_davicom();
 307 +       ltq_add_device_leds_gpio(-1, ARRAY_SIZE(easy98000_leds_gpio),
 308 +               easy98000_leds_gpio);
 309 +       register_easy98000_cpld();
 310 +       easy98000_spi_gpio_init();
 311  }
 312
 313  static void __init