atheros: remove odd board check during image build
[openwrt.git] / target / linux / atheros / patches-3.18 / 220-enet_micrel_workaround.patch
1 --- a/drivers/net/ethernet/atheros/ar231x/ar231x.c
2 +++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c
3 @@ -135,6 +135,7 @@ static int ar231x_mdiobus_write(struct m
4  static int ar231x_mdiobus_reset(struct mii_bus *bus);
5  static int ar231x_mdiobus_probe(struct net_device *dev);
6  static void ar231x_adjust_link(struct net_device *dev);
7 +static bool no_phy;
8  
9  #ifndef ERR
10  #define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
11 @@ -167,6 +168,32 @@ static const struct net_device_ops ar231
12  #endif
13  };
14  
15 +static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id)
16 +{
17 +       int phy_reg;
18 +
19 +       /**
20 +        * Grab the bits from PHYIR1, and put them
21 +        * in the upper half.
22 +        */
23 +       phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
24 +
25 +       if (phy_reg < 0)
26 +               return -EIO;
27 +
28 +       *phy_id = (phy_reg & 0xffff) << 16;
29 +
30 +       /* Grab the bits from PHYIR2, and put them in the lower half */
31 +       phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
32 +
33 +       if (phy_reg < 0)
34 +               return -EIO;
35 +
36 +       *phy_id |= (phy_reg & 0xffff);
37 +
38 +       return 0;
39 +}
40 +
41  static int ar231x_probe(struct platform_device *pdev)
42  {
43         struct net_device *dev;
44 @@ -273,6 +300,24 @@ static int ar231x_probe(struct platform_
45  
46         mdiobus_register(sp->mii_bus);
47  
48 +       /**
49 +        * Workaround for Micrel switch, which is only available on
50 +        * one PHY and cannot be configured through MDIO.
51 +        */
52 +       if (!no_phy) {
53 +               u32 phy_id = 0;
54 +
55 +               get_phy_id(sp->mii_bus, 1, &phy_id);
56 +               if (phy_id == 0x00221450)
57 +                       no_phy = true;
58 +       }
59 +       if (no_phy) {
60 +               sp->link = 1;
61 +               netif_carrier_on(dev);
62 +               return 0;
63 +       }
64 +       no_phy = true;
65 +
66         if (ar231x_mdiobus_probe(dev) != 0) {
67                 printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
68                 rx_tasklet_cleanup(dev);
69 @@ -329,8 +374,10 @@ static int ar231x_remove(struct platform
70         rx_tasklet_cleanup(dev);
71         ar231x_init_cleanup(dev);
72         unregister_netdev(dev);
73 -       mdiobus_unregister(sp->mii_bus);
74 -       mdiobus_free(sp->mii_bus);
75 +       if (sp->mii_bus) {
76 +               mdiobus_unregister(sp->mii_bus);
77 +               mdiobus_free(sp->mii_bus);
78 +       }
79         kfree(dev);
80         return 0;
81  }
82 @@ -1079,6 +1126,9 @@ static int ar231x_ioctl(struct net_devic
83  {
84         struct ar231x_private *sp = netdev_priv(dev);
85  
86 +       if (!sp->phy_dev)
87 +               return -ENODEV;
88 +
89         switch (cmd) {
90         case SIOCGMIIPHY:
91         case SIOCGMIIREG: