target/linux/ar71xx/patches-4.1/822-MIPS-ath79-Arduino-yun-support.patch

   1 --- a/arch/mips/ath79/Kconfig
   2 +++ b/arch/mips/ath79/Kconfig
   3 @@ -76,6 +76,19 @@ config ATH79_MACH_ANTMINER_S3
   4         select ATH79_DEV_USB
   5         select ATH79_DEV_WMAC
   6
   7 +config ATH79_MACH_ARDUINO_YUN
   8 +       bool "Arduino Yun"
   9 +       select SOC_AR933X
  10 +       select ATH79_DEV_ETH
  11 +       select ATH79_DEV_GPIO_BUTTONS
  12 +       select ATH79_DEV_LEDS_GPIO
  13 +       select ATH79_DEV_M25P80
  14 +       select ATH79_DEV_USB
  15 +       select ATH79_DEV_WMAC
  16 +       help
  17 +         Say 'Y' here if you want your kernel to support the
  18 +         Arduino Yun.
  19 +
  20  config ATH79_MACH_AP113
  21         bool "Atheros AP113 board support"
  22         select SOC_AR724X
  23 --- a/arch/mips/ath79/machtypes.h
  24 +++ b/arch/mips/ath79/machtypes.h
  25 @@ -23,6 +23,7 @@ enum ath79_mach_type {
  26         ATH79_MACH_ALL0315N,            /* Allnet ALL0315N */
  27         ATH79_MACH_ANTMINER_S1, /* Antminer S1 */
  28         ATH79_MACH_ANTMINER_S3, /* Antminer S3 */
  29 +       ATH79_MACH_ARDUINO_YUN,         /* Yun */
  30         ATH79_MACH_AP113,               /* Atheros AP113 reference board */
  31         ATH79_MACH_AP121,               /* Atheros AP121 reference board */
  32         ATH79_MACH_AP121_MINI,          /* Atheros AP121-MINI reference board */
  33 --- a/arch/mips/ath79/Makefile
  34 +++ b/arch/mips/ath79/Makefile
  35 @@ -44,6 +44,7 @@ obj-$(CONFIG_ATH79_MACH_ALL0258N)     += mac
  36  obj-$(CONFIG_ATH79_MACH_ALL0315N)      += mach-all0315n.o
  37  obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o
  38  obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o
  39 +obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN)   += mach-arduino-yun.o
  40  obj-$(CONFIG_ATH79_MACH_AP113)         += mach-ap113.o
  41  obj-$(CONFIG_ATH79_MACH_AP121)         += mach-ap121.o
  42  obj-$(CONFIG_ATH79_MACH_AP132)         += mach-ap132.o