ocf-linux: version bump to 20110720
[15.05/openwrt.git] / target / linux / generic / files / crypto / ocf / hifn / hifn7751var.h
1 /* $FreeBSD: src/sys/dev/hifn/hifn7751var.h,v 1.9 2007/03/21 03:42:49 sam Exp $ */
2 /*      $OpenBSD: hifn7751var.h,v 1.42 2002/04/08 17:49:42 jason Exp $  */
3
4 /*-
5  * Invertex AEON / Hifn 7751 driver
6  * Copyright (c) 1999 Invertex Inc. All rights reserved.
7  * Copyright (c) 1999 Theo de Raadt
8  * Copyright (c) 2000-2001 Network Security Technologies, Inc.
9  *                      http://www.netsec.net
10  *
11  * Please send any comments, feedback, bug-fixes, or feature requests to
12  * software@invertex.com.
13  *
14  * Redistribution and use in source and binary forms, with or without
15  * modification, are permitted provided that the following conditions
16  * are met:
17  *
18  * 1. Redistributions of source code must retain the above copyright
19  *    notice, this list of conditions and the following disclaimer.
20  * 2. Redistributions in binary form must reproduce the above copyright
21  *    notice, this list of conditions and the following disclaimer in the
22  *    documentation and/or other materials provided with the distribution.
23  * 3. The name of the author may not be used to endorse or promote products
24  *    derived from this software without specific prior written permission.
25  *
26  *
27  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
28  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
29  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
30  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
31  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
32  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
33  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
34  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
35  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
36  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37  *
38  * Effort sponsored in part by the Defense Advanced Research Projects
39  * Agency (DARPA) and Air Force Research Laboratory, Air Force
40  * Materiel Command, USAF, under agreement number F30602-01-2-0537.
41  *
42  */
43
44 #ifndef __HIFN7751VAR_H__
45 #define __HIFN7751VAR_H__
46
47 #ifdef __KERNEL__
48
49 /*
50  * Some configurable values for the driver.  By default command+result
51  * descriptor rings are the same size.  The src+dst descriptor rings
52  * are sized at 3.5x the number of potential commands.  Slower parts
53  * (e.g. 7951) tend to run out of src descriptors; faster parts (7811)
54  * src+cmd/result descriptors.  It's not clear that increasing the size
55  * of the descriptor rings helps performance significantly as other
56  * factors tend to come into play (e.g. copying misaligned packets).
57  */
58 #define HIFN_D_CMD_RSIZE        24      /* command descriptors */
59 #define HIFN_D_SRC_RSIZE        ((HIFN_D_CMD_RSIZE * 7) / 2)    /* source descriptors */
60 #define HIFN_D_RES_RSIZE        HIFN_D_CMD_RSIZE        /* result descriptors */
61 #define HIFN_D_DST_RSIZE        HIFN_D_SRC_RSIZE        /* destination descriptors */
62
63 /*
64  *  Length values for cryptography
65  */
66 #define HIFN_DES_KEY_LENGTH             8
67 #define HIFN_3DES_KEY_LENGTH            24
68 #define HIFN_MAX_CRYPT_KEY_LENGTH       HIFN_3DES_KEY_LENGTH
69 #define HIFN_IV_LENGTH                  8
70 #define HIFN_AES_IV_LENGTH              16
71 #define HIFN_MAX_IV_LENGTH              HIFN_AES_IV_LENGTH
72
73 /*
74  *  Length values for authentication
75  */
76 #define HIFN_MAC_KEY_LENGTH             64
77 #define HIFN_MD5_LENGTH                 16
78 #define HIFN_SHA1_LENGTH                20
79 #define HIFN_MAC_TRUNC_LENGTH           12
80
81 #define MAX_SCATTER 64
82
83 /*
84  * Data structure to hold all 4 rings and any other ring related data.
85  */
86 struct hifn_dma {
87         /*
88          *  Descriptor rings.  We add +1 to the size to accomidate the
89          *  jump descriptor.
90          */
91         struct hifn_desc        cmdr[HIFN_D_CMD_RSIZE+1];
92         struct hifn_desc        srcr[HIFN_D_SRC_RSIZE+1];
93         struct hifn_desc        dstr[HIFN_D_DST_RSIZE+1];
94         struct hifn_desc        resr[HIFN_D_RES_RSIZE+1];
95
96         struct hifn_command     *hifn_commands[HIFN_D_RES_RSIZE];
97
98         u_char                  command_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_COMMAND];
99         u_char                  result_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_RESULT];
100         u_int32_t               slop[HIFN_D_CMD_RSIZE];
101
102         u_int64_t               test_src, test_dst;
103
104         /*
105          *  Our current positions for insertion and removal from the desriptor
106          *  rings. 
107          */
108         int                     cmdi, srci, dsti, resi;
109         volatile int            cmdu, srcu, dstu, resu;
110         int                     cmdk, srck, dstk, resk;
111 };
112
113 struct hifn_session {
114         int hs_used;
115         int hs_mlen;
116 };
117
118 #define HIFN_RING_SYNC(sc, r, i, f)                                     \
119         /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */
120
121 #define HIFN_CMDR_SYNC(sc, i, f)        HIFN_RING_SYNC((sc), cmdr, (i), (f))
122 #define HIFN_RESR_SYNC(sc, i, f)        HIFN_RING_SYNC((sc), resr, (i), (f))
123 #define HIFN_SRCR_SYNC(sc, i, f)        HIFN_RING_SYNC((sc), srcr, (i), (f))
124 #define HIFN_DSTR_SYNC(sc, i, f)        HIFN_RING_SYNC((sc), dstr, (i), (f))
125
126 #define HIFN_CMD_SYNC(sc, i, f)                                         \
127         /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */
128
129 #define HIFN_RES_SYNC(sc, i, f)                                         \
130         /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */
131
132 typedef int bus_size_t;
133
134 /*
135  * Holds data specific to a single HIFN board.
136  */
137 struct hifn_softc {
138         softc_device_decl                sc_dev;
139
140         struct pci_dev          *sc_pcidev;     /* PCI device pointer */
141         spinlock_t              sc_mtx;         /* per-instance lock */
142
143         int                     sc_num;         /* for multiple devs */
144
145         ocf_iomem_t             sc_bar0;
146         bus_size_t              sc_bar0_lastreg;/* bar0 last reg written */
147         ocf_iomem_t             sc_bar1;
148         bus_size_t              sc_bar1_lastreg;/* bar1 last reg written */
149
150         int                     sc_irq;
151
152         u_int32_t               sc_dmaier;
153         u_int32_t               sc_drammodel;   /* 1=dram, 0=sram */
154         u_int32_t               sc_pllconfig;   /* 7954/7955/7956 PLL config */
155
156         struct hifn_dma         *sc_dma;
157         dma_addr_t              sc_dma_physaddr;/* physical address of sc_dma */
158
159         int                     sc_dmansegs;
160         int32_t                 sc_cid;
161         int                     sc_maxses;
162         int                     sc_nsessions;
163         struct hifn_session     *sc_sessions;
164         int                     sc_ramsize;
165         int                     sc_flags;
166 #define HIFN_HAS_RNG            0x1     /* includes random number generator */
167 #define HIFN_HAS_PUBLIC         0x2     /* includes public key support */
168 #define HIFN_HAS_AES            0x4     /* includes AES support */
169 #define HIFN_IS_7811            0x8     /* Hifn 7811 part */
170 #define HIFN_IS_7956            0x10    /* Hifn 7956/7955 don't have SDRAM */
171
172         struct timer_list       sc_tickto;      /* for managing DMA */
173
174         int                     sc_rngfirst;
175         int                     sc_rnghz;       /* RNG polling frequency */
176
177         int                     sc_c_busy;      /* command ring busy */
178         int                     sc_s_busy;      /* source data ring busy */
179         int                     sc_d_busy;      /* destination data ring busy */
180         int                     sc_r_busy;      /* result ring busy */
181         int                     sc_active;      /* for initial countdown */
182         int                     sc_needwakeup;  /* ops q'd wating on resources */
183         int                     sc_curbatch;    /* # ops submitted w/o int */
184         int                     sc_suspended;
185 #ifdef HIFN_VULCANDEV
186         struct cdev            *sc_pkdev;
187 #endif
188 };
189
190 #define HIFN_LOCK(_sc)          spin_lock_irqsave(&(_sc)->sc_mtx, l_flags)
191 #define HIFN_UNLOCK(_sc)        spin_unlock_irqrestore(&(_sc)->sc_mtx, l_flags)
192
193 /*
194  *  hifn_command_t
195  *
196  *  This is the control structure used to pass commands to hifn_encrypt().
197  *
198  *  flags
199  *  -----
200  *  Flags is the bitwise "or" values for command configuration.  A single
201  *  encrypt direction needs to be set:
202  *
203  *      HIFN_ENCODE or HIFN_DECODE
204  *
205  *  To use cryptography, a single crypto algorithm must be included:
206  *
207  *      HIFN_CRYPT_3DES or HIFN_CRYPT_DES
208  *
209  *  To use authentication is used, a single MAC algorithm must be included:
210  *
211  *      HIFN_MAC_MD5 or HIFN_MAC_SHA1
212  *
213  *  By default MD5 uses a 16 byte hash and SHA-1 uses a 20 byte hash.
214  *  If the value below is set, hash values are truncated or assumed
215  *  truncated to 12 bytes:
216  *
217  *      HIFN_MAC_TRUNC
218  *
219  *  Keys for encryption and authentication can be sent as part of a command,
220  *  or the last key value used with a particular session can be retrieved
221  *  and used again if either of these flags are not specified.
222  *
223  *      HIFN_CRYPT_NEW_KEY, HIFN_MAC_NEW_KEY
224  *
225  *  session_num
226  *  -----------
227  *  A number between 0 and 2048 (for DRAM models) or a number between 
228  *  0 and 768 (for SRAM models).  Those who don't want to use session
229  *  numbers should leave value at zero and send a new crypt key and/or
230  *  new MAC key on every command.  If you use session numbers and
231  *  don't send a key with a command, the last key sent for that same
232  *  session number will be used.
233  *
234  *  Warning:  Using session numbers and multiboard at the same time
235  *            is currently broken.
236  *
237  *  mbuf
238  *  ----
239  *  Either fill in the mbuf pointer and npa=0 or
240  *       fill packp[] and packl[] and set npa to > 0
241  * 
242  *  mac_header_skip
243  *  ---------------
244  *  The number of bytes of the source_buf that are skipped over before
245  *  authentication begins.  This must be a number between 0 and 2^16-1
246  *  and can be used by IPsec implementers to skip over IP headers.
247  *  *** Value ignored if authentication not used ***
248  *
249  *  crypt_header_skip
250  *  -----------------
251  *  The number of bytes of the source_buf that are skipped over before
252  *  the cryptographic operation begins.  This must be a number between 0
253  *  and 2^16-1.  For IPsec, this number will always be 8 bytes larger
254  *  than the auth_header_skip (to skip over the ESP header).
255  *  *** Value ignored if cryptography not used ***
256  *
257  */
258 struct hifn_operand {
259         union {
260                 struct sk_buff *skb;
261                 struct uio *io;
262                 unsigned char *buf;
263         } u;
264         void            *map;
265         bus_size_t      mapsize;
266         int             nsegs;
267         struct {
268             dma_addr_t  ds_addr;
269             int         ds_len;
270         } segs[MAX_SCATTER];
271 };
272
273 struct hifn_command {
274         u_int16_t session_num;
275         u_int16_t base_masks, cry_masks, mac_masks;
276         u_int8_t iv[HIFN_MAX_IV_LENGTH], *ck, mac[HIFN_MAC_KEY_LENGTH];
277         int cklen;
278         int sloplen, slopidx;
279
280         struct hifn_operand src;
281         struct hifn_operand dst;
282
283         struct hifn_softc *softc;
284         struct cryptop *crp;
285         struct cryptodesc *enccrd, *maccrd;
286 };
287
288 #define src_skb         src.u.skb
289 #define src_io          src.u.io
290 #define src_map         src.map
291 #define src_mapsize     src.mapsize
292 #define src_segs        src.segs
293 #define src_nsegs       src.nsegs
294 #define src_buf         src.u.buf
295
296 #define dst_skb         dst.u.skb
297 #define dst_io          dst.u.io
298 #define dst_map         dst.map
299 #define dst_mapsize     dst.mapsize
300 #define dst_segs        dst.segs
301 #define dst_nsegs       dst.nsegs
302 #define dst_buf         dst.u.buf
303
304 /*
305  *  Return values for hifn_crypto()
306  */
307 #define HIFN_CRYPTO_SUCCESS     0
308 #define HIFN_CRYPTO_BAD_INPUT   (-1)
309 #define HIFN_CRYPTO_RINGS_FULL  (-2)
310
311 /**************************************************************************
312  *
313  *  Function:  hifn_crypto
314  *
315  *  Purpose:   Called by external drivers to begin an encryption on the
316  *             HIFN board.
317  *
318  *  Blocking/Non-blocking Issues
319  *  ============================
320  *  The driver cannot block in hifn_crypto (no calls to tsleep) currently.
321  *  hifn_crypto() returns HIFN_CRYPTO_RINGS_FULL if there is not enough
322  *  room in any of the rings for the request to proceed.
323  *
324  *  Return Values
325  *  =============
326  *  0 for success, negative values on error
327  *
328  *  Defines for negative error codes are:
329  *  
330  *    HIFN_CRYPTO_BAD_INPUT  :  The passed in command had invalid settings.
331  *    HIFN_CRYPTO_RINGS_FULL :  All DMA rings were full and non-blocking
332  *                              behaviour was requested.
333  *
334  *************************************************************************/
335
336 /*
337  * Convert back and forth from 'sid' to 'card' and 'session'
338  */
339 #define HIFN_CARD(sid)          (((sid) & 0xf0000000) >> 28)
340 #define HIFN_SESSION(sid)       ((sid) & 0x000007ff)
341 #define HIFN_SID(crd,ses)       (((crd) << 28) | ((ses) & 0x7ff))
342
343 #endif /* _KERNEL */
344
345 struct hifn_stats {
346         u_int64_t hst_ibytes;
347         u_int64_t hst_obytes;
348         u_int32_t hst_ipackets;
349         u_int32_t hst_opackets;
350         u_int32_t hst_invalid;
351         u_int32_t hst_nomem;            /* malloc or one of hst_nomem_* */
352         u_int32_t hst_abort;
353         u_int32_t hst_noirq;            /* IRQ for no reason */
354         u_int32_t hst_totbatch;         /* ops submitted w/o interrupt */
355         u_int32_t hst_maxbatch;         /* max ops submitted together */
356         u_int32_t hst_unaligned;        /* unaligned src caused copy */
357         /*
358          * The following divides hst_nomem into more specific buckets.
359          */
360         u_int32_t hst_nomem_map;        /* bus_dmamap_create failed */
361         u_int32_t hst_nomem_load;       /* bus_dmamap_load_* failed */
362         u_int32_t hst_nomem_mbuf;       /* MGET* failed */
363         u_int32_t hst_nomem_mcl;        /* MCLGET* failed */
364         u_int32_t hst_nomem_cr;         /* out of command/result descriptor */
365         u_int32_t hst_nomem_sd;         /* out of src/dst descriptors */
366 };
367
368 #endif /* __HIFN7751VAR_H__ */