target/linux/brcm2708/patches-3.18/0076-BCM2708_DT-Build-the-overlays-as-well.patch

   1 From 672e48427ca17fadd59d294eec56476dd6a75398 Mon Sep 17 00:00:00 2001
   2 From: Phil Elwell <phil@raspberrypi.org>
   3 Date: Fri, 23 Jan 2015 15:18:03 +0000
   4 Subject: [PATCH 076/114] BCM2708_DT: Build the overlays as well
   5
   6 ---
   7  arch/arm/boot/dts/Makefile | 13 +++++++++++++
   8  1 file changed, 13 insertions(+)
   9
  10 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
  11 index adaebbb..3c7f539 100644
  12 --- a/arch/arm/boot/dts/Makefile
  13 +++ b/arch/arm/boot/dts/Makefile
  14 @@ -55,6 +55,14 @@ dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
  15  dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
  16  dtb-$(CONFIG_BCM2708_DT) += bcm2708-rpi-b.dtb
  17  dtb-$(CONFIG_BCM2708_DT) += bcm2708-rpi-b-plus.dtb
  18 +dtb-$(CONFIG_BCM2708_DT) += hifiberry-dac-overlay.dtb
  19 +dtb-$(CONFIG_BCM2708_DT) += hifiberry-dacplus-overlay.dtb
  20 +dtb-$(CONFIG_BCM2708_DT) += hifiberry-digi-overlay.dtb
  21 +dtb-$(CONFIG_BCM2708_DT) += iqaudio-dac-overlay.dtb
  22 +dtb-$(CONFIG_BCM2708_DT) += iqaudio-dacplus-overlay.dtb
  23 +dtb-$(CONFIG_BCM2708_DT) += lirc-rpi-overlay.dtb
  24 +dtb-$(CONFIG_BCM2708_DT) += w1-gpio-overlay.dtb
  25 +dtb-$(CONFIG_BCM2708_DT) += w1-gpio-pullup-overlay.dtb
  26  dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
  27  dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
  28  dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
  29 @@ -524,6 +532,11 @@ targets += $(dtb-y)
  30
  31  endif
  32
  33 +# Enable fixups to support overlays on BCM2708 platforms
  34 +ifeq ($(CONFIG_BCM2708_DT),y)
  35 +       DTC_FLAGS ?= -@
  36 +endif
  37 +
  38  # *.dtb used to be generated in the directory above. Clean out the
  39  # old build results so people don't accidentally use them.
  40  dtbs: $(addprefix $(obj)/, $(dtb-y))
  41 --
  42 1.8.3.2
  43