openwrt.git
10 years agogcc: prevent the use of LDRD/STRD on ARMv5TE
nbd [Wed, 19 Feb 2014 19:20:10 +0000 (19:20 +0000)]
gcc: prevent the use of LDRD/STRD on ARMv5TE

These instructions are for 64-bit load/store. On ARMv5TE, the CPU
requires addresses to be aligned to 64-bit. When misaligned, behavior is
undefined (effectively either loads the same word twice on LDRD, or
corrupts surrounding memory on STRD).

On ARMv6 and newer, unaligned access is safe.

Removing these instructions for ARMv5TE is necessary, because GCC
ignores alignment information in pointers and does unsafe optimizations
that have shown up as bugs in various places.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39638 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoar71xx: add profile and build image for TP-Link TL-WDR4900 v2.0 board
juhosg [Wed, 19 Feb 2014 12:15:35 +0000 (12:15 +0000)]
ar71xx: add profile and build image for TP-Link TL-WDR4900 v2.0 board

Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4850/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39637 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoar71xx: add user-space support for TP-Link TL-WDR4900 v2.0 board
juhosg [Wed, 19 Feb 2014 12:15:34 +0000 (12:15 +0000)]
ar71xx: add user-space support for TP-Link TL-WDR4900 v2.0 board

Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4849/
[juhosg:
  - use the Archer C7 specific LED setup instead of adding
    identical code]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39636 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoar71xx: add kernel support for the TP-Link TL-WDR4900 v2.0 board
juhosg [Wed, 19 Feb 2014 12:15:32 +0000 (12:15 +0000)]
ar71xx: add kernel support for the TP-Link TL-WDR4900 v2.0 board

Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4848/
[juhosg:
  - rename and refresh kernel patch,
  - merge the board setup code into mach-archer-c7.c and drop
    mach-tl-wdr49000-v2.c]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39635 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agosunxi: move a lost CONFIG_CHARGER symbol to generic
nico [Wed, 19 Feb 2014 00:17:19 +0000 (00:17 +0000)]
sunxi: move a lost CONFIG_CHARGER symbol to generic

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39634 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agotarget/sunxi: make REGMAP built-in (used by REGULATOR)
nico [Tue, 18 Feb 2014 22:29:56 +0000 (22:29 +0000)]
target/sunxi: make REGMAP built-in (used by REGULATOR)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39633 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agotarget/uml: update README
nico [Tue, 18 Feb 2014 22:16:04 +0000 (22:16 +0000)]
target/uml: update README

invoking uml is now simplier, not need to setup console & serial

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39632 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agotoolchain: update build steps doc
nico [Tue, 18 Feb 2014 22:15:58 +0000 (22:15 +0000)]
toolchain: update build steps doc

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39631 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agomac80211: disable libertas-sd on uml target
nico [Tue, 18 Feb 2014 22:15:52 +0000 (22:15 +0000)]
mac80211: disable libertas-sd on uml target

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39630 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agouboot-envtools: pass target cflags
nico [Tue, 18 Feb 2014 22:11:24 +0000 (22:11 +0000)]
uboot-envtools: pass target cflags

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39629 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoodhcp6c: readd userclass and vendorclass
cyrus [Tue, 18 Feb 2014 18:30:47 +0000 (18:30 +0000)]
odhcp6c: readd userclass and vendorclass

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39628 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agokernel: refresh configs with kconfig.pl
juhosg [Tue, 18 Feb 2014 17:34:18 +0000 (17:34 +0000)]
kernel: refresh configs with kconfig.pl

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39627 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoar71xx: fix unaligned access hacks for tcp timestamps
juhosg [Tue, 18 Feb 2014 17:34:17 +0000 (17:34 +0000)]
ar71xx: fix unaligned access hacks for tcp timestamps

This missing bit of the hack saves hugely on instruction traps
on tcp connections to ar71xx based routers.

Patch-by: Dave Taht <dave.taht@bufferbloat.net>
Patchwork: http://patchwork.openwrt.org/patch/4905/
[juhosg: adjust subject, refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39626 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoar71xx: WNR2200: fix mounting root fs problem
juhosg [Tue, 18 Feb 2014 17:34:16 +0000 (17:34 +0000)]
ar71xx: WNR2200: fix mounting root fs problem

Solves ticket #14356 <https://dev.openwrt.org/ticket/14356>

Without this patch, UART output will show only 4 partitions:
  [    0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
  [    0.750000] Creating 4 MTD partitions on "spi0.0":
  [    0.750000] 0x000000000000-0x000000050000 : "u-boot"
  [    0.760000] 0x000000050000-0x000000070000 : "u-boot-env"
  [    0.770000] 0x000000070000-0x0000007f0000 : "firmware"
  [    0.790000] 0x0000007f0000-0x000000800000 : "art"
and then linux complains :VFS: Cannot open root device "(null)"

With this patch, UART out will show 7 partitions:
  [    0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
  [    0.750000] Creating 4 MTD partitions on "spi0.0":
  [    0.750000] 0x000000000000-0x000000040000 : "u-boot"
  [    0.760000] 0x000000040000-0x000000050000 : "u-boot-env"
  [    0.770000] 0x000000050000-0x0000007f0000 : "firmware"
  [    0.780000] 2 netgear-fw partitions found on MTD device firmware
  [    0.780000] 0x000000050000-0x00000014b440 : "kernel"
  [    0.790000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  [    0.800000] 0x00000014b440-0x0000007f0000 : "rootfs"
  [    0.810000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  [    0.820000] mtd: device 4 (rootfs) set to be root filesystem
  [    0.830000] 1 squashfs-split partitions found on MTD device rootfs
  [    0.830000] 0x000000340000-0x0000007f0000 : "rootfs_data"
  [    0.840000] 0x0000007f0000-0x000000800000 : "art"

This patch is tested against r39502 of trunk.

Signed-off-by: Jonathan Chang <changcs@santos.ee.ntu.edu.tw>
Patchwork: http://patchwork.openwrt.org/patch/4870/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39625 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoodhcp6c: add validation rules to proto handler
blogic [Tue, 18 Feb 2014 13:34:16 +0000 (13:34 +0000)]
odhcp6c: add validation rules to proto handler

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39624 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agorelayd: add uci validation
blogic [Tue, 18 Feb 2014 13:34:12 +0000 (13:34 +0000)]
relayd: add uci validation

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39623 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agomac80211: add validation rules
blogic [Tue, 18 Feb 2014 13:34:08 +0000 (13:34 +0000)]
mac80211: add validation rules

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39622 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agonetifd: add validation support
blogic [Tue, 18 Feb 2014 13:34:04 +0000 (13:34 +0000)]
netifd: add validation support

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39621 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agohostapd: add validation rules to wireless handler
blogic [Tue, 18 Feb 2014 13:33:59 +0000 (13:33 +0000)]
hostapd: add validation rules to wireless handler

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39620 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoppp: add validation rules to proto handler
blogic [Tue, 18 Feb 2014 13:33:56 +0000 (13:33 +0000)]
ppp: add validation rules to proto handler

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39619 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agocomgt: add validation rules to proto handler
blogic [Tue, 18 Feb 2014 13:33:52 +0000 (13:33 +0000)]
comgt: add validation rules to proto handler

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39618 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agofirewall3: update init.d script to make use of procd
blogic [Tue, 18 Feb 2014 13:33:47 +0000 (13:33 +0000)]
firewall3: update init.d script to make use of procd

add validation data

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39617 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoubox: logd did not register its config.reload trigger properly
blogic [Tue, 18 Feb 2014 13:33:43 +0000 (13:33 +0000)]
ubox: logd did not register its config.reload trigger properly

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39616 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agobase-files: split /etc/init.d/boot into 2 files
blogic [Tue, 18 Feb 2014 13:33:40 +0000 (13:33 +0000)]
base-files: split /etc/init.d/boot into 2 files

this allows us to bind a procd trigger to system.@system[-1]

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39615 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agonetifd: update to latest git head
blogic [Tue, 18 Feb 2014 13:33:36 +0000 (13:33 +0000)]
netifd: update to latest git head

this adds support for proto and wireless handler adding uci validation rules

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39614 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoprocd: update to latest git head
blogic [Tue, 18 Feb 2014 13:33:32 +0000 (13:33 +0000)]
procd: update to latest git head

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39613 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoprocd: the helper script did not export all functions properly
blogic [Tue, 18 Feb 2014 13:33:29 +0000 (13:33 +0000)]
procd: the helper script did not export all functions properly

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39612 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoralink: add support for na930
blogic [Tue, 18 Feb 2014 13:33:25 +0000 (13:33 +0000)]
ralink: add support for na930

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39611 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoralink: add gpio_uartf mux group
blogic [Tue, 18 Feb 2014 13:33:20 +0000 (13:33 +0000)]
ralink: add gpio_uartf mux group

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39610 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoralink: fix the gpio mode mapping
blogic [Tue, 18 Feb 2014 13:33:16 +0000 (13:33 +0000)]
ralink: fix the gpio mode mapping

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39609 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoauthsae: update to latest version
blogic [Tue, 18 Feb 2014 13:33:13 +0000 (13:33 +0000)]
authsae: update to latest version

Signed-off-by: Stefan May <smay@4finger.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39608 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoopenssl: fix up PKG_DEPENDS. there are 2 missing CONFIG_ prefixe
blogic [Tue, 18 Feb 2014 13:33:08 +0000 (13:33 +0000)]
openssl: fix up PKG_DEPENDS. there are 2 missing CONFIG_ prefixe

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39607 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agouci: update to latest version, adds preparation for validation support and blobmsg...
nbd [Tue, 18 Feb 2014 12:27:11 +0000 (12:27 +0000)]
uci: update to latest version, adds preparation for validation support and blobmsg int64 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39606 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoodhcp6c: send reconfigure-accept again to be compliant
cyrus [Mon, 17 Feb 2014 20:31:21 +0000 (20:31 +0000)]
odhcp6c: send reconfigure-accept again to be compliant

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39605 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoodhcpd: Fix RA interval + add support for prefixes > 64 and < 97
cyrus [Mon, 17 Feb 2014 20:30:29 +0000 (20:30 +0000)]
odhcpd: Fix RA interval + add support for prefixes > 64 and < 97

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39604 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago3.13: revert r39601 as the symbol is already there
wigyori [Mon, 17 Feb 2014 11:49:34 +0000 (11:49 +0000)]
3.13: revert r39601 as the symbol is already there

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39602 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago3.13: add missing NF_TABLES symbol - until someone packages it
wigyori [Mon, 17 Feb 2014 10:57:11 +0000 (10:57 +0000)]
3.13: add missing NF_TABLES symbol - until someone packages it

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39601 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago3.13: add missing symbol
wigyori [Mon, 17 Feb 2014 10:20:53 +0000 (10:20 +0000)]
3.13: add missing symbol

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39600 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[tools] cmake: upgrade to 2.8.12.2
luka [Sun, 16 Feb 2014 21:51:10 +0000 (21:51 +0000)]
[tools] cmake: upgrade to 2.8.12.2

Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39598 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agonetifd: work around dangling prefix kernel-routes (fixes #14963)
cyrus [Sun, 16 Feb 2014 11:20:22 +0000 (11:20 +0000)]
netifd: work around dangling prefix kernel-routes (fixes #14963)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39597 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agokirkwood: dockstar: remove sata from packages
luka [Sun, 16 Feb 2014 00:14:29 +0000 (00:14 +0000)]
kirkwood: dockstar: remove sata from packages

The dockstar doesn't have any sata ports.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39596 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agokirkwood: add support for Seagate GoFlexNet
luka [Sun, 16 Feb 2014 00:14:27 +0000 (00:14 +0000)]
kirkwood: add support for Seagate GoFlexNet

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39595 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[package] uboot-kirkwood: add support for Seagate GoFlexNet
luka [Sun, 16 Feb 2014 00:14:26 +0000 (00:14 +0000)]
[package] uboot-kirkwood: add support for Seagate GoFlexNet

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39594 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agokirkwood: update support for dockstar
luka [Sat, 15 Feb 2014 23:53:10 +0000 (23:53 +0000)]
kirkwood: update support for dockstar

The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Alexander Couzens <lynxis@fe80.eu>
CC: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39593 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agokirkwood: update support for ib62x0
luka [Sat, 15 Feb 2014 23:53:09 +0000 (23:53 +0000)]
kirkwood: update support for ib62x0

The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-ib62x0-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39592 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agokirkwood: update support for iconnect
luka [Sat, 15 Feb 2014 23:53:08 +0000 (23:53 +0000)]
kirkwood: update support for iconnect

Previous patch was pushed due to false user report. While at it fix alphabetic
ordering.

The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0x1fe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39591 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[package] uboot-kirkwood: update to 2013.10
luka [Sat, 15 Feb 2014 23:53:07 +0000 (23:53 +0000)]
[package] uboot-kirkwood: update to 2013.10

Tested on:

 * Cloud Engines Pogoplug E02
 * RaidSonic ICY BOX IB-NAS62x0
 * Iomega Iconnect

Some users are avoiding to replace their bootloader, because of that add
support for second stage u-boot image. Having ubifs capable bootloader is
required in order to boot current OpenWrt trunk.

Sample ib62x0 commands for running second stage bootloader:

tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img
bootm 0x800000

Sample ib62x0 commands for flashing second stage bootloader:

tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img
nand erase 0x100000 0x100000 ; nand write 0x800000 0x100000 0x${filesize}
nand read 0x800000 0x100000 0x100000 ; bootm 0x800000

While at it include parallel build support, use alphabetic order of the boards
and introduce common OpenWrt configuration.

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by (on ib62x0): Luka Perkov <luka@openwrt.org>
Tested-by (on dockstar): Alexander Couzens <lynxis@fe80.eu>
Tested-by (on iconnect): Wojciech Dubowik <wojciech.dubowik@neratec.com>
CC: Felix Kaechele <heffer@fedoraproject.org>
CC: Wojciech Dubowik <wojciech.dubowik@neratec.com>
CC: Alexander Couzens <lynxis@fe80.eu>
CC: Daniel Engberg <daniel.engberg@pyret.net>
CC: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39590 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agokernel: rtl8306: update reset function
luka [Sat, 15 Feb 2014 22:54:35 +0000 (22:54 +0000)]
kernel: rtl8306: update reset function

Signed-off-by: Antonios Vamporakis <ant@area128.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39589 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agolantiq: fix typo in pinctl driver
luka [Sat, 15 Feb 2014 22:54:34 +0000 (22:54 +0000)]
lantiq: fix typo in pinctl driver

Signed-off-by: Antonios Vamporakis <ant@area128.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39588 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agolantiq: fix PCI problems on ARV4510PW
luka [Sat, 15 Feb 2014 22:54:32 +0000 (22:54 +0000)]
lantiq: fix PCI problems on ARV4510PW

Some ARV4510PW units seem to have unstable PCI due to missing pull-up
resistors. This patch makes sure that the GPIO lines are driven properly.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39587 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agonetifd: fix source-routing breaking 6in4 + others
cyrus [Fri, 14 Feb 2014 21:21:44 +0000 (21:21 +0000)]
netifd: fix source-routing breaking 6in4 + others

6in4 historically allowed an ip6addr without a mask however the newly
introduced source-routing segfaulted in this scenario (#14958 + #14858).

Fixes include: "Fix ubus route src mask printing" and
"Disable netlink auto ack" (thanks to Hans Dedecker)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39586 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[omap]: use the default package set
kaloz [Fri, 14 Feb 2014 10:09:07 +0000 (10:09 +0000)]
[omap]: use the default package set

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39584 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoar71xx: fix mtdpartsize macro in image Makefile (#14961)
jow [Thu, 13 Feb 2014 21:19:00 +0000 (21:19 +0000)]
ar71xx: fix mtdpartsize macro in image Makefile (#14961)

The mtdpartsize macro triggers shell errors on various Linux distributions
when the partname argument $(1) does not appear within the partmap $(2).

Change the sed pattern to only emit anything if a successful substitution
occured and only evaluate the arithmetic expression if something was printed
by the sed program.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39583 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoupgrade 3.13 targets to 3.13.2, refresh patches
kaloz [Thu, 13 Feb 2014 13:27:14 +0000 (13:27 +0000)]
upgrade 3.13 targets to 3.13.2, refresh patches

Signed-off-by: Imre Kaloz <kaloz@openwrt.org
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39582 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[generic]: upgrade 3.12 to 3.12.10
kaloz [Thu, 13 Feb 2014 12:57:36 +0000 (12:57 +0000)]
[generic]: upgrade 3.12 to 3.12.10

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39581 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[omap]: change image generation logic
kaloz [Thu, 13 Feb 2014 10:43:32 +0000 (10:43 +0000)]
[omap]: change image generation logic

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39580 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agohandle "neon" fpu type
kaloz [Wed, 12 Feb 2014 15:43:14 +0000 (15:43 +0000)]
handle "neon" fpu type

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39579 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[omap]: handle some CONFIG_TARGET_ROOTFS_INCLUDE_ foo
kaloz [Wed, 12 Feb 2014 15:38:08 +0000 (15:38 +0000)]
[omap]: handle some CONFIG_TARGET_ROOTFS_INCLUDE_ foo

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39578 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[omap]: copy initramfs zImage to the bin dir as well
kaloz [Wed, 12 Feb 2014 10:51:46 +0000 (10:51 +0000)]
[omap]: copy initramfs zImage to the bin dir as well

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39577 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[omap]: generate ubifs images
kaloz [Wed, 12 Feb 2014 10:48:33 +0000 (10:48 +0000)]
[omap]: generate ubifs images

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39576 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoodhcp6c: remove source-restriction from local routes again (broke relaying)
cyrus [Wed, 12 Feb 2014 08:54:43 +0000 (08:54 +0000)]
odhcp6c: remove source-restriction from local routes again (broke relaying)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39575 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoimx6: drop 3.12 support
luka [Wed, 12 Feb 2014 00:46:02 +0000 (00:46 +0000)]
imx6: drop 3.12 support

Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39574 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoimx6: add initial 3.13 support
luka [Wed, 12 Feb 2014 00:46:00 +0000 (00:46 +0000)]
imx6: add initial 3.13 support

Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39573 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agomac80211: send wpa frames through the WMM voice queue - improves connection reliability
nbd [Tue, 11 Feb 2014 15:00:55 +0000 (15:00 +0000)]
mac80211: send wpa frames through the WMM voice queue - improves connection reliability

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39572 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoath9k: add p2p client mode support powersave patches
nbd [Tue, 11 Feb 2014 15:00:51 +0000 (15:00 +0000)]
ath9k: add p2p client mode support powersave patches

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39571 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agortl8187: fix crashes on mips caused by misaligned DMA and cache issues
nbd [Tue, 11 Feb 2014 15:00:36 +0000 (15:00 +0000)]
rtl8187: fix crashes on mips caused by misaligned DMA and cache issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39570 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agomvebu: enable NAND controller support
luka [Tue, 11 Feb 2014 02:16:04 +0000 (02:16 +0000)]
mvebu: enable NAND controller support

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39569 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agomvebu: add support for the Armada XP GP board (DB-MV784MP-GP)
luka [Tue, 11 Feb 2014 02:07:47 +0000 (02:07 +0000)]
mvebu: add support for the Armada XP GP board (DB-MV784MP-GP)

This Armada XP GP board from Marvell comes with:

* 2GB DDR3 DIMM
* 1GB NAND flash (8-bit interface)
* 16MB NOR flash (16-bot interrface)
* 16MB SPI flash
* SDIO module
* 3 PCIe
* 1 SATA link
* 2 USB EHCI
* 1 internal SSD
* 4 Ethernet Gigabit
* 1 RS232 port over USB

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39568 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agomvebu: update kernel config
luka [Tue, 11 Feb 2014 02:07:46 +0000 (02:07 +0000)]
mvebu: update kernel config

The config-3.10 doesn't specify the configuration of the backported PCI
features, and the Marvell EBU Device Bus Controller, this will prevent
a clean compile. This patch enables these features to archive a clean compile
without having to specify the state of these configuration after starting to
compile.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39567 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agomvebu: backport mainline patches from kernel 3.13
luka [Tue, 11 Feb 2014 02:07:44 +0000 (02:07 +0000)]
mvebu: backport mainline patches from kernel 3.13

This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.12, and Linux v3.13.
This work mainly covers:

* Finishes work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c)
  between the PXA family, and the Armada family.
* timer initialization update, and access function for the Armada family.
* Generic IRQ handling backporting.
* Some bug fixes.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39566 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agomvebu: backport mainline patches from kernel 3.12
luka [Tue, 11 Feb 2014 02:07:41 +0000 (02:07 +0000)]
mvebu: backport mainline patches from kernel 3.12

This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.11, and Linux v3.12.
This work mainly covers:

* Ground work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c)
  between the PXA family,and the Armada family.
* Further updates to the mvebu MBus.
* Work and ground work for enabling MSI on the Armada family.
* some phy / mdio bus initialization related work.
* Device tree binding documentation update.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39565 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agomvebu: backport mainline patches from kernel 3.11
luka [Tue, 11 Feb 2014 02:07:38 +0000 (02:07 +0000)]
mvebu: backport mainline patches from kernel 3.11

This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.10, and Linux v3.11.
This work mainly covers:

* Enabling USB storage, and PCI to mvebu_defconfig.
* Add support for NOR flash.
* Some PCI device tree related updates, and bus parsing.
* Adding Armada XP & 370 PCI driver, and update some clock gating
  specifics.
* Introduce Marvell EBU Device Bus driver.
* Enaling USB in the armada*.dts.
* Enabling, and updating the mvebu-mbus.
* Some SATA and Ethernet related fixes.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39564 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agokernel: fix kmod-usb-phy-nop
hauke [Mon, 10 Feb 2014 20:30:24 +0000 (20:30 +0000)]
kernel: fix kmod-usb-phy-nop

phy-generic.ko was renamed and moved from kernel version to version.
kernel <= 3.9: nop-usb-xceiv.ko
kernel >= 3.10 && <= 3.11: phy-nop.ko
kernel >= 3.12: phy-generic.ko

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39563 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agokernel: fix kmod-usb-net-smsc95xx
hauke [Mon, 10 Feb 2014 20:12:13 +0000 (20:12 +0000)]
kernel: fix kmod-usb-net-smsc95xx

smsc95xx.ko depends on crc16.ko on kernel >= 3.8
There was an additional kmod-usb-net-smsc95xx definition in the mxs
target code which conflicted with the one in the common area.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39562 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[generic/3.13]: keep initramfs the default for us
kaloz [Mon, 10 Feb 2014 15:30:01 +0000 (15:30 +0000)]
[generic/3.13]: keep initramfs the default for us

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39561 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[usb]: phy-omap-control.ko is already part of a different package
kaloz [Mon, 10 Feb 2014 15:29:11 +0000 (15:29 +0000)]
[usb]: phy-omap-control.ko is already part of a different package

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39560 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[usb]: additional omap/musb related fixes
kaloz [Mon, 10 Feb 2014 14:40:27 +0000 (14:40 +0000)]
[usb]: additional omap/musb related fixes

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39559 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[usb]: fixup ethernet gadget, disable EEM support
kaloz [Mon, 10 Feb 2014 14:38:22 +0000 (14:38 +0000)]
[usb]: fixup ethernet gadget, disable EEM support

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39558 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[omap]: don't build in usb stuff
kaloz [Mon, 10 Feb 2014 14:35:20 +0000 (14:35 +0000)]
[omap]: don't build in usb stuff

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39557 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[usb]: package the driver for smsc95xx chips
kaloz [Mon, 10 Feb 2014 14:34:08 +0000 (14:34 +0000)]
[usb]: package the driver for smsc95xx chips

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39556 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[usb]: add additional omap related changes
kaloz [Sun, 9 Feb 2014 17:08:33 +0000 (17:08 +0000)]
[usb]: add additional omap related changes

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39555 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[usb]: additional musb fixups
kaloz [Sun, 9 Feb 2014 16:14:30 +0000 (16:14 +0000)]
[usb]: additional musb fixups

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39554 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[usb]: musb depends on usb-gadget support
kaloz [Sun, 9 Feb 2014 14:24:28 +0000 (14:24 +0000)]
[usb]: musb depends on usb-gadget support

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39550 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[usb]: use musb in PIO mode, as DMA support is platform dependent
kaloz [Sun, 9 Feb 2014 14:08:10 +0000 (14:08 +0000)]
[usb]: use musb in PIO mode, as DMA support is platform dependent

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39549 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[usb]: add more musb symbols
kaloz [Sun, 9 Feb 2014 14:02:59 +0000 (14:02 +0000)]
[usb]: add more musb symbols

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39548 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agofix logic error on fpu cflags selection
kaloz [Sun, 9 Feb 2014 13:46:16 +0000 (13:46 +0000)]
fix logic error on fpu cflags selection

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39547 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[usb]: make musb available for omap as well
kaloz [Sun, 9 Feb 2014 13:36:10 +0000 (13:36 +0000)]
[usb]: make musb available for omap as well

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39546 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[usb]: rename Kconfig symbol to the current one
kaloz [Sun, 9 Feb 2014 13:02:17 +0000 (13:02 +0000)]
[usb]: rename Kconfig symbol to the current one

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39544 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[usb]: move some omap24xx modules to the generic Makefile
kaloz [Sun, 9 Feb 2014 13:01:00 +0000 (13:01 +0000)]
[usb]: move some omap24xx modules to the generic Makefile

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39543 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agokernel: add kmod-usb-net-kalmia
hauke [Sat, 8 Feb 2014 16:54:44 +0000 (16:54 +0000)]
kernel: add kmod-usb-net-kalmia

This patch adds a new kernel module for Samsung USB LTE modems.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39535 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agokernel: XHCI PCI quirks for kernel 3.12 and 3.13
hauke [Sat, 8 Feb 2014 16:32:37 +0000 (16:32 +0000)]
kernel: XHCI PCI quirks for kernel 3.12 and 3.13

This adds empty definitions for the PCI quirks functions when they
should not be included in the kernel.
This is based on a patch by Daniel <daniel@makrotopia.org>

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39534 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agokernel: fix bridge compilation on kernel 3.13
hauke [Sat, 8 Feb 2014 15:36:03 +0000 (15:36 +0000)]
kernel: fix bridge compilation on kernel 3.13

The int brnf_call_ebtables in the header should be extern, otherwise
every object file gets its own int and they will conflict when linking
the binary.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39533 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agokernel: negate kernel version dependencies to fix config for new kernel versions
hauke [Sat, 8 Feb 2014 15:34:12 +0000 (15:34 +0000)]
kernel: negate kernel version dependencies to fix config for new kernel versions

This fixes some problems on kernel 3.13 and also removes the reference to LINUX_3_7.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39532 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agokernel: add missing config symbol for 3.13.
hauke [Sat, 8 Feb 2014 15:31:57 +0000 (15:31 +0000)]
kernel: add missing config symbol for 3.13.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39531 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agomac80211: add led_trigger_blink{_oneshot}()
hauke [Sat, 8 Feb 2014 12:19:22 +0000 (12:19 +0000)]
mac80211: add led_trigger_blink{_oneshot}()

When led support is deactivated in the kernel and
CPTCFG_BACKPORT_BUILD_LEDS is set mac80211 references
led_trigger_blink_oneshot() but it is not declared anywhere.

This fixes the following build error:
net/mac80211/led.c: In function 'ieee80211_led_rx':
net/mac80211/led.c:25:2: error: implicit declaration of function 'led_trigger_blink_oneshot' [-Werror=implicit-function-declaration]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39530 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agomvebu: remove forced module config
jogo [Sat, 8 Feb 2014 11:47:33 +0000 (11:47 +0000)]
mvebu: remove forced module config

These should either be disabled or not present in the config, else
they might cause build issues because of unexpected unpackaged
modules, as it is the case for LEDS_CLASS.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39529 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoacx-mac80211: really fix the build
hauke [Sat, 8 Feb 2014 11:30:20 +0000 (11:30 +0000)]
acx-mac80211: really fix the build

The fix in r39482 was wrong.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39528 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years agoath9k: merge tx iq calibration fixes
nbd [Fri, 7 Feb 2014 18:08:57 +0000 (18:08 +0000)]
ath9k: merge tx iq calibration fixes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39527 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[3.13]: and add some more symbols
wigyori [Fri, 7 Feb 2014 16:55:32 +0000 (16:55 +0000)]
[3.13]: and add some more symbols

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39526 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 years ago[x86_64]: upgrade to 3.13.1
kaloz [Fri, 7 Feb 2014 16:51:01 +0000 (16:51 +0000)]
[x86_64]: upgrade to 3.13.1

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39525 3c298f89-4303-0410-b956-a3cf2f4a3e73