rmilecki [Wed, 26 Aug 2015 14:51:47 +0000 (14:51 +0000)]
bcm53xx: use pending Netgear R7000 patch
It includes support for LEDs and buttons.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46730
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Wed, 26 Aug 2015 14:39:06 +0000 (14:39 +0000)]
bcm53xx: use backported patches for UART0 and profiling
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46729
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Wed, 26 Aug 2015 13:03:09 +0000 (13:03 +0000)]
brcm63xx: fix WAP-5813n default network config
/etc/uci-defaults/02_network had a typo, making it generate the wrong
network config.
Closes #20407.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46727
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Wed, 26 Aug 2015 10:11:41 +0000 (10:11 +0000)]
linux: fix off-by-one in handling in /proc/net/route
Add an upstream fix for /proc/net/route causing missing routes doing
several continued reads from it.
Only 4.1+ is affected.
Closes #20403.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46726
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Tue, 25 Aug 2015 22:04:53 +0000 (22:04 +0000)]
brcm63xx: enable dual rx/tx spi support for hsspi
should improve flash access times. Should be harmless to gnerally
enable regardless if a flash supporting dual reads is attached. In
doubt, spi-nor will just fall back to serial reads.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46725
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Tue, 25 Aug 2015 15:20:48 +0000 (15:20 +0000)]
mac80211: backport latest patches except for NVRAM support
We sill don't use kernel 4.2 which is required for backporting using
upstream NVRAM support patch.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46724
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 25 Aug 2015 07:46:32 +0000 (07:46 +0000)]
scripts/patch-kernel.sh: remove -E flag to preserve empty files touched by patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46723
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 25 Aug 2015 07:45:42 +0000 (07:45 +0000)]
rules.mk: remove GCC 4.4 and GCC 4.5 conditional
gcc 4.4 was removed in r44957 gcc: remove 4.4.7 (only used by avr32)
gcc 4.5 was removed in r36149
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46722
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 25 Aug 2015 07:25:20 +0000 (07:25 +0000)]
kernel: bridge, multicast-to-unicast: assign src after pskb_may_pull()
A call to pskb_may_pull() might reallocate skb->data. Therefore we
should only assign the src-pointer after any potential reallocations.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46721
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 25 Aug 2015 07:25:10 +0000 (07:25 +0000)]
Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)"
This reverts commit
a080e8e1943156168913d0353a2e99d1151102aa.
It did not fix the problem but just hid some symptom. The real issue was
that IGMP/MLD report suppression was not considered for the
multicast-to-unicast feature. A recent netifd which isolates IGMP/MLD
reports between STAs by utilizing AP-isolation and bridge-hairpinning
should have fixed this.
It is perfectly fine to apply multicast-to-unicast to IPv6 Neighbor
Solicitations, too (once that feature is configured correctly).
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46720
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 25 Aug 2015 07:24:53 +0000 (07:24 +0000)]
netifd: update to the latest version, adds multicast-to-unicast fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46719
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Tue, 25 Aug 2015 06:27:37 +0000 (06:27 +0000)]
netifd: various updates
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46718
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Mon, 24 Aug 2015 08:53:16 +0000 (08:53 +0000)]
omcproxy: fix last commit
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46717
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Mon, 24 Aug 2015 08:28:11 +0000 (08:28 +0000)]
omcproxy: add new igmpv3 & mldv2 multicast proxy
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46716
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sun, 23 Aug 2015 21:33:57 +0000 (21:33 +0000)]
kernel: remove already upstream applied patch
Remove 131-MIPS-export-get_c0_perfcount_int.patch which was already applied
in 4.1.6. This fixes the following build error:
arch/mips/ath79/setup.c:217:77: error: redefinition of '__kstrtab_get_c0_perfcount_int'
arch/mips/ath79/setup.c:211:77: note: previous definition of '__kstrtab_get_c0_perfcount_int' was here
arch/mips/ath79/setup.c:217:350: error: redefinition of '__ksymtab_get_c0_perfcount_int'
arch/mips/ath79/setup.c:211:350: note: previous definition of '__ksymtab_get_c0_perfcount_int' was here
scripts/Makefile.build:258: recipe for target 'arch/mips/ath79/setup.o' failed
Reported-by: swalker
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46715
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sun, 23 Aug 2015 19:11:07 +0000 (19:11 +0000)]
adm5120: make patches apply again
Fix patches not applying anymore since r46654.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46714
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sun, 23 Aug 2015 18:06:11 +0000 (18:06 +0000)]
kernel: update 4.1 to 4.1.6
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.6
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46713
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sun, 23 Aug 2015 13:35:03 +0000 (13:35 +0000)]
mvebu: kirkwood: fix ehci-orion probe if generic-phy isn't enabled
Properly treat -ENOSYS as no PHY, else ehci-orion won't work without
generic phy support.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46711
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sun, 23 Aug 2015 09:36:03 +0000 (09:36 +0000)]
mac80211: disable ipw2x00 for big endian targets
The ipw2x00 drivers assume that the system they are running is little
endian, and access everything in native byte order. When run on a big
endian system, everything breaks apart.
Since fixing this is non trivial on a first glance, disable them for
big endian targets.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46708
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sun, 23 Aug 2015 09:35:56 +0000 (09:35 +0000)]
brcm63xx: ensure dummy byte is set for mapped spi flash with fast read
Some CFEs seem to misconfigure the mapped memory flash access with
fast read but without a dummy byte, causing all accesses to be prefixed
with 0xff.
This of course breaks reading out the nvram, so do not just move back to
single i/o accessors, but also ensure that the dummy byte is correctly
set.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46707
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sun, 23 Aug 2015 09:35:46 +0000 (09:35 +0000)]
scripts/feeds: allow export of feeds with static revisions
Add a switch to scripts/feeds that allows listing the feeds with their
currently checked out revisions in feeds.conf compatible format.
This allows providing a feeds.conf for public builds to make replication
of the build easier.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46706
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Fri, 21 Aug 2015 13:23:29 +0000 (13:23 +0000)]
sunxi: bump to 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46705
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Fri, 21 Aug 2015 13:16:11 +0000 (13:16 +0000)]
sunxi: add audio module for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46704
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Fri, 21 Aug 2015 10:16:15 +0000 (10:16 +0000)]
sunxi: update ahci package list for a couple board profiles
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46703
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Fri, 21 Aug 2015 10:08:07 +0000 (10:08 +0000)]
sunxi: reorganize kmod-ata-sunxi dependencies
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46702
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Fri, 21 Aug 2015 09:48:05 +0000 (09:48 +0000)]
Newer kernels make use of libahci in ahci-platform, ie. also on non-PCI
platforms.
As there is no single config symbol deciding whether libahci.ko is
being built or not it seems the most sensitive thing to package it in
kmod-ata-core.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46701
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Fri, 21 Aug 2015 08:10:48 +0000 (08:10 +0000)]
This had been set in r44508 as a workaround for switch
problems.
Now that the switch driver can handle two devices with
the same MAC address in separate VLANs we can go back
to using the same address on both interfaces.
This is the Linksys firmware's default behavior.
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46700
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Fri, 21 Aug 2015 08:09:52 +0000 (08:09 +0000)]
Previously, all VLANs (port-based or 802.1q) were sharing
a single database in the ATU. This created problems in the
case of a system where two ports/devices share a MAC address
(e.g. Linksys WRT1900AC eth0/eth1).
This also clears any bootloader-set FDB defaults. This had
caused issues creating port-based VLANs when mappings
overlapped previous VLANs. Packets destined to a port
not in the default port group flooded all ports.
Tested on a
88E6171 (Linksys EA4500) and
88E6172 ('1900AC)
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46699
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Fri, 21 Aug 2015 08:01:48 +0000 (08:01 +0000)]
mvebu: fix cobra chainmask
Thanks Sebastian for spotting it.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46697
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Thu, 20 Aug 2015 23:19:42 +0000 (23:19 +0000)]
kernel: add missing symbols for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46696
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Thu, 20 Aug 2015 12:43:45 +0000 (12:43 +0000)]
odhcpd: various RA improvements
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46694
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Wed, 19 Aug 2015 08:45:19 +0000 (08:45 +0000)]
mwlwifi: fix commit hash for 10.3.0.8
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46693
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Wed, 19 Aug 2015 08:31:23 +0000 (08:31 +0000)]
mvebu: add support for the Linksys boot counter
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46690
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Wed, 19 Aug 2015 08:20:11 +0000 (08:20 +0000)]
uhttpd: we don't know where the device is located, so reflect that in the cert
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46688
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Tue, 18 Aug 2015 11:22:47 +0000 (11:22 +0000)]
mwlwifi: upgrade to 10.3.0.8-
20150818
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46687
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Tue, 18 Aug 2015 09:20:34 +0000 (09:20 +0000)]
enable strong SSP / Stackprotector on gcc5
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46685
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Tue, 18 Aug 2015 09:18:40 +0000 (09:18 +0000)]
musl: fix getsubopt function
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46684
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Tue, 18 Aug 2015 08:37:38 +0000 (08:37 +0000)]
polarssl: Fix build failures due to PKG_NAME != dir name
Packages that depend on PolarSSL fail to build because polarssl's InstallDev
section never actually gets executed because (prior to this patch) the package
name does not match the subdir the package is in (presumably due to upstream
name change). As a workaround I have changed the package name back to
polarssl and used a new variable SRC_PKG_NAME for the purposes of downloading
the upstream tarball and creating PKG_BUILD_DIR.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46683
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Mon, 17 Aug 2015 21:19:27 +0000 (21:19 +0000)]
mac80211: add mt7601u driver
firmware is not available in linux-firmware yet
so use official driver source
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46682
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Mon, 17 Aug 2015 16:17:36 +0000 (16:17 +0000)]
uhttpd: pass X-HTTP-Method-Override header to cgi scripts
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46677
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 16:10:49 +0000 (16:10 +0000)]
at91: fix usb rate backport patch tab mangle
The patch submitted in [46649] was mangled in the use of gmails webmail interface, tabs replaced with spaces, resulting in a patch which dit not apply.
This should fix the issue, sorry for the noise.
Signed-off-by: Ben Whitten <benwhitten@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46676
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 11:26:14 +0000 (11:26 +0000)]
orion: remove IRQF_DISABLED
no-op since 2.6.35
removed in Kernel 4.1
see https://lwn.net/Articles/380931/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46672
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 11:26:02 +0000 (11:26 +0000)]
generic: crypto: remove IRQF_DISABLED
no-op since 2.6.35
removed in Kernel 4.1
see https://lwn.net/Articles/380931/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46671
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 11:25:57 +0000 (11:25 +0000)]
lantiq: Support newer versions of the PEF7071 ethernet PHYs
The BT Home Hub 5A uses three PEF7071 with PHY ID 0xd565a401. Daniel's
PHY driver (for his u-boot sources) already supports that PHY because
it uses a PHY ID mask of 0xfffffff8.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46670
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 11:25:51 +0000 (11:25 +0000)]
iwinfo: update to latest git HEAD
adds extra station info reporting
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46669
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 11:25:46 +0000 (11:25 +0000)]
oxnas: remove support for kernel 3.18 and 4.0
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46668
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 10:13:46 +0000 (10:13 +0000)]
ramips: move patches around
0073 needs to applied afert 0102
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46667
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 10:13:03 +0000 (10:13 +0000)]
ugps: update to latest git HEAD
fixes 2 bugs
* typo
* use %04d rather than %d when printing the position
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46666
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:24:47 +0000 (06:24 +0000)]
ramips: base-files: optimize etc/diag.sh and etc/board.d/01_leds scripts
Instead of using board name provided explicitly as text in LED name, ex.:
[...]
mlwg2)
status_led="mlwg2:blue:system"
[...]
use $board variable, which allows to combine together multiple boards with same color and LED names, ex:
[...]
mlw221|\
mlwg2)
status_led="$board:blue:system"
[...]
The above approach allows to shrink size of code in base-files/etc/board.d/01_leds and base-files/etc/diag.sh scripts dramatically.
One thing to keep in mind here is that we assume to use proper and consistent LED naming scheme ("device:color:led-name").
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46665
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:24:34 +0000 (06:24 +0000)]
ramips: use consistent naming scheme for LEDs
The upstream LED naming convention is "device:color:led-name", but it seems that many of supported boards in OpenWrt don't follow this approach.
The following patch fixes this inconsistency in dts{,i} files and updates base-files scripts for ramips target:
* fixes wrong indentation
* keeps case statements structure in same convention as in other scripts (no empty line after ";;", no indentation for case...esac body)
* fixes wrong LED names for some of boards (makes them the same as in dts{,i} files)
* combines boards with same configuration (ex. set_wifi_led "rt2800pci-phy0::radio" in 01_leds)
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46664
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:24:04 +0000 (06:24 +0000)]
ar71xx: add support for TP-Link TL-WDR6500 v2
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
This patch adds support for TP-Link TL-WDR6500 v2.
The firmware has a U-Boot header for kernel, and a TP-LINK v2 header for
the whole firmware, so I have to create a new firmware creation method.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46663
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:23:49 +0000 (06:23 +0000)]
ar71xx: add 64kb bootloader mtd parser for tplinkpart
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
This patch adds flash layout parser for TP-Link firmwares which have a 64kb
bootloader.
This is used for TP-Link TL-WDR6500 v2.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46662
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:23:43 +0000 (06:23 +0000)]
tools/firmware-utils: add header version 2 support for mktplinkfw
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
This patch adds header version 2 option for mktplinkfw.
The version 2 header is used for AR/QCA firmwares and is not the same as
the header generated by mktplinkfw2.
Instead, it is nearly the same as version 1 header except for the header
version and the RSA signature.
The header version 2 support is used for newer TP-Link routers which have
only a 64kb bootloader part, e.g. TL-WDR6500 v2.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46661
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:18:38 +0000 (06:18 +0000)]
ramips: reorder the sysupgrade script
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46660
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:18:30 +0000 (06:18 +0000)]
ramips: reorder patches
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46659
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:18:15 +0000 (06:18 +0000)]
ipq806x: switch AP148 to using SMEM based MTD parser
*Enable SMEM MTD parser and its dependencies (SMEM & HW spinlocks) in
the kernel config
*Replaces the MTD layout in DT by the dynamic layout provided by the
SMEM parser for AP148
Using the OF based parser is still possible on platforms which have a
fixed MTD partition layout.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46658
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:18:04 +0000 (06:18 +0000)]
ipq806x: add QCOM SMEM based MTD parser
This patch adds a new parser which uses the SMEM available on IPQ and
some other QCOM platforms to map the MTD partitions.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46657
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:17:58 +0000 (06:17 +0000)]
ipq806x: add SMEM support
2 patches are cherry-picked from the following LKML thread:
*https://lkml.org/lkml/2015/4/11/208
The last patch (036-soc-qcom-add-smem-to-IPQ806x-platforms.patch) is
adding the corresponding DT nodes required for IPQ806x.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46656
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:17:47 +0000 (06:17 +0000)]
ipq806x: add hwspinlock support
This change cherry-picks the following 3 changes from linux-next:
*fb7737 hwspinlock/core: add device tree support
*19a0f6 hwspinlock: qcom: Add support for Qualcomm HW Mutex block
*bd5717 hwspinlock: qcom: Correct msb in regmap_field
We're also adding a patch to add the hardware spinlock device nodes on
IPQ806x platforms (033-soc-qcom-Add-sfbp-device-to-IPQ806x-dts.patch).
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46655
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:17:37 +0000 (06:17 +0000)]
kernel: move linux, part-probe dt parsing in generic code
The "linux,part-probe" dts parsing is a pretty neat generic feature.
It has been posted to kernel.org and could easily be reused by all
targets.
This change moves the patch to the 3.18 and 4.1 generic folders, and
makes the feature available to all platforms who may want to use it.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46654
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:17:23 +0000 (06:17 +0000)]
base-files: default_postinst: propagate the real postinst return code
Using the postinst script for sanity checks and expecting opkg to fail
if the postinst didn't return 0 was possible in Barrier Breaker, propagate
the real postinst return code through default_postinst to restore this
behaviour.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46653
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:17:13 +0000 (06:17 +0000)]
hostapd: Add vlan_file option to netifd.sh
Other VLAN related options are already being processed in netifd.sh
but the vlan_file option is missing. This option allows the mapping
of vlan IDs to network interfaces and will be used in dynamic VLAN
feature for binding stations to interfaces based on VLAN
assignments. The change is done similarly to the wpa_psk_file
option.
Signed-off-by: Gong Cheng <chengg11@yahoo.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46652
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:16:54 +0000 (06:16 +0000)]
ar71xx: Add support for Black Swift
Add support for the Black Swift board:
http://www.black-swift.com/
Took relevant parts and slightly adapted from:
https://github.com/blackswift/openwrt/blob/master/bsb.patch
Signed-off-by: Bruno Randolf <br1@einfach.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46651
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:16:39 +0000 (06:16 +0000)]
base-files: rework reset button script to indicate factory reset
With this change we let user know 5 seconds have passed and reset button
can be released (to trigger factory reset)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46650
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:16:29 +0000 (06:16 +0000)]
at91: Backport determine_rate prototype fix
This patch is backport of a fix to a USB prototype mismatch bug found
in 3.18 kernels, originally submitted by Boris Brezillon [1].
The symptom of this bug was that devices attached to the at91 using
at91_ohci on a hub never appeared and failed to initialise.
[1] http://www.spinics.net/lists/linux-usb/msg125969.html
Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46649
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:16:19 +0000 (06:16 +0000)]
mcs814x: use firmware partition splitter on dLAN USB Extender
to avoid editing the dts every time the kernel size changes.
uImage is now bigger than 1MB. Pad uImage to 64k erase block size.
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46648
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:16:08 +0000 (06:16 +0000)]
mcs814x: fix interrupt handling
Switch to generich chip irqs/irq domains.
Interrupts were broken since kernel 3.14. dLAN USB extender is now
booting again.
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46647
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:15:56 +0000 (06:15 +0000)]
mcs814x: fix debug UART
Switch to new 8250 debug uart code because the old
mach-mcs814x/include/mach/debug-macro.S tries to include
asm/hardware/debug-8250.S which no longer exists since kernel 3.14
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46646
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:15:49 +0000 (06:15 +0000)]
ramips: Fix MT7621 pinmux bits for uart3, uart2, mdio
The MT7621 uses a 2 bit wide configuration of the sdhci, spi, mdio, pcie,
wdt, uart2 and uart3 in the GPIO_MODE register. It was correctly done
for sdhci, spi, pcie and wdt, The same has to be done for uart3, uart2
and mdio.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46645
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:15:44 +0000 (06:15 +0000)]
ramips: Fix amount of MT7621 pins controlled by spi group
The PINS conntrolled by the SPI bits in the GPIO_MODE register is always
7 and not 8 for nand mode.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46644
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:15:34 +0000 (06:15 +0000)]
ramips: Fix uart2/uart3 pinmux order on MT7621
The uart3 setting in GPIO_MODE register is before the uart2 setting. Also
don't mix uart2 and uart3 function/groups.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46643
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:04:48 +0000 (06:04 +0000)]
brcm2708: override disabled device tree module status from config.txt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46642
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:04:39 +0000 (06:04 +0000)]
brcm2708: fix kmod-sound-soc-iqaudio-dac and add missing symbol
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46641
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:04:32 +0000 (06:04 +0000)]
brcm2708: update 4.1 patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46640
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:04:18 +0000 (06:04 +0000)]
brcm2708: use BuildDTB in image/Makefile
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46639
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:04:10 +0000 (06:04 +0000)]
brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46638
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:04:02 +0000 (06:04 +0000)]
oxnas: switch to kernel 4.1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46637
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:03:57 +0000 (06:03 +0000)]
oxnas: prepare for kernel 4.1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46636
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:03:42 +0000 (06:03 +0000)]
ramips: remove unnecessary LED declaration for WT1520 in diag.sh
This device doesn't have defined LEDs in its dts file.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46635
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:02:59 +0000 (06:02 +0000)]
ramips: fix indentation, case statements structure and optimize base-files/etc/board.d/02_network
The following patch:
* fixes wrong indentation
* combines together boards with same configuration
* removes unnecessary spaces
* removes empty lines after ";;" and uses only "|\" (for consistency)
* orders boards alphabetically
in base-files/etc/board.d/02_network script.
One bug was left untouched: freestation5 board is listed twice in case statement, in ramips_setup_macs().
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46634
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:01:49 +0000 (06:01 +0000)]
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh
Always use "|\" (without spaces) and keep boards in alphabetical order.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46633
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:01:44 +0000 (06:01 +0000)]
ramips: remove leading spaces, sort boards and optimize base-files/lib/ramips.sh
This patch:
* fixes various mistakes (leading spaces, wrong or missing model names)
* shortens model strings (we don't need to use whole model string from dts file, make it for consistency and as optimization)
* sorts boards alphabetically
in base-files/lib/ramips.sh script.
Case statement was tested after above changes with simple script, which:
* takes model string from dts{,i} file (model = "...")
* provides this value as case input ($machine)
* returns output ($name)
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46632
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:01:38 +0000 (06:01 +0000)]
ramips: fix various mistakes in subtargets *.mk profiles
This patch:
* fixes wrong indentation
* fixes wrong names and descriptions (ex. Dlink -> D-Link)
* changes filenames to manufacturer names
* moves oem/unknown manufacturers boards to misc.mk profiles
* combines profiles for boards from the same manufacturers in one file (ex. Olimex)
* fix profile files structure (keep the same convention as in other targets, ex. ar71xx)
in various .mk profiles, in ramips target.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46631
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:01:23 +0000 (06:01 +0000)]
ramips: remove old code for Edimax BR-6524N
It seems that support for Edimax BR-6524N was dropped long time ago (dts file for this device is missing).
This patch removes remaining code.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46630
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:01:06 +0000 (06:01 +0000)]
ramips: fix 7Links PX-4885 dts{, i}, board, image and profile names
The following patch changes 7Links PX-4885 dts{,i} filenames, board, image and profile names from "PX4885" to "PX-4885" (for consistency).
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46629
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:00:49 +0000 (06:00 +0000)]
ramips: fix Buffalo WMR-300 dts, board, image and profile names
The following patch changes Buffalo WMR-300 dts filename, board, image and profile names from "WMR300" to "WMR-300" (for consistency).
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46628
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 06:00:11 +0000 (06:00 +0000)]
ramips: fix Omnima models, images and profiles names
Official names for supported Omnima products are (as on website):
* Omnima HPM
* Omnima MiniEMBWiFi
* Omnima MiniEMBPlug
This patch changes:
* board names
* dts filenames
* profile names
* image filenames
* LED names
for Omnima devices, for consistency.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46627
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 05:59:57 +0000 (05:59 +0000)]
ramips: fix Edimax BR-6425 board name
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46626
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 05:59:47 +0000 (05:59 +0000)]
ramips: fix Tenda W150M model name
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46625
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 05:59:36 +0000 (05:59 +0000)]
ramips: fix Aigale Ai-BR100 dts and profile names
The following patch changes dts filename and profile name for Aigale Ai-BR100 (for consistency).
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46624
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 05:59:29 +0000 (05:59 +0000)]
ramips: fix Olimex models, images and profiles names
Official names for RT5350F based OLinuXino products are "RT5350F-OLinuXino{,-EVB}" as on official manufacturer website.
The following patch:
* changes board names from "olinuxino-rt5350f{,-evb}" to "rt5350f-olinuxino{,-evb}"
* changes filenames of dts and profile files
* changes image filenames
for Olimex RT5350F-OLinuXino{,-EVB} devices.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46623
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 05:59:12 +0000 (05:59 +0000)]
ramips: fix Sitecom WL-341v3 board and image names
The following patch changes:
* board name from "wl341v3" to "wl-341v3"
* dts filename
* LED names in dts file
for Sitecom WL-341v3 device.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46622
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 05:58:57 +0000 (05:58 +0000)]
ramips: fix Argus ATP-52B board and image names
The following patch:
* changes board name from "argus-atp52b" to "atp-52b"
* changes dts filename
* fixes LED names in dts file and base-files scripts
* removes manufacturer name from image filename
for Argus ATP-52B device.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46621
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 05:58:44 +0000 (05:58 +0000)]
ramips: fix Belkin F7C027 image name
This patch removes manufacturer from Belkin F7C027 image name ("belkinf7c027" -> "f7c027").
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46620
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 05:58:35 +0000 (05:58 +0000)]
ramips: fix Asus RT-N56U dts filename
Other Asus RT-N dts files are named "RT-N..." (not "RTN..."), so use the same for RT-N56U.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46619
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 05:58:20 +0000 (05:58 +0000)]
ramips: fix UPVEL model names
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46618
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 05:58:15 +0000 (05:58 +0000)]
ramips: fix Xiaomi MiWiFi Mini board, image and profile names
The following patch:
* changes board name from "xiaomi-miwifi-mini" to "miwifi-mini"
* changes filenames of dts and profile
* fixes LED names in dts file and base-files scripts
* removes manufacturer name from image filename
for Xiaomi MiWiFi Mini device.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46617
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 05:58:07 +0000 (05:58 +0000)]
ramips: fix Asus RP-N53 and Lenovo Y1{, S} image names
This patch:
* fixes typo (rp_n53 -> rp-n53) in Asus RP-N53 image name
* removes manufacturer from image names for Lenovo Y1{,S} devices
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46616
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 05:57:55 +0000 (05:57 +0000)]
ramips: fix Asus WL-330N{, 3G} boards names
There are other Asus boards supported in ramips target, so use the same naming scheme for WL-330N{,3G} boards and their dts files.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46615
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 17 Aug 2015 05:57:41 +0000 (05:57 +0000)]
ramips: fix Zbtlink ZBT-WR8305RT board name
There is another Zbtlink board (ZBT-WA05) supported in ramips target, so use the same naming scheme for ZBT-WR8305RT board and its dts file.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46614
3c298f89-4303-0410-b956-
a3cf2f4a3e73
projects / openwrt.git / log