1 -- Copyright 2010 Jo-Philipp Wich <xm@subsignal.org>
2 -- Licensed to the public under the Apache License 2.0.
4 local util = require "luci.util"
5 local ip = require "luci.ip"
7 function write_float(self, section, value)
8 local n = tonumber(value)
10 return Value.write(self, section, "%.1f" % n)
14 m = Map("olsrd", translate("OLSR Daemon - Interface"),
15 translate("The OLSR daemon is an implementation of the Optimized Link State Routing protocol. "..
16 "As such it allows mesh routing for any network equipment. "..
17 "It runs on any wifi card that supports ad-hoc mode and of course on any ethernet device. "..
18 "Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and documentation."))
20 m.redirect = luci.dispatcher.build_url("admin/services/olsrd")
22 if not arg[1] or m.uci:get("olsrd", arg[1]) ~= "Interface" then
23 luci.http.redirect(m.redirect)
27 i = m:section(NamedSection, arg[1], "Interface", translate("Interface"))
31 i:tab("general", translate("General Settings"))
32 i:tab("addrs", translate("IP Addresses"))
33 i:tab("timing", translate("Timing and Validity"))
35 ign = i:taboption("general", Flag, "ignore", translate("Enable"),
36 translate("Enable this interface."))
40 function ign.cfgvalue(self, section)
41 return Flag.cfgvalue(self, section) or "0"
44 network = i:taboption("general", Value, "interface", translate("Network"),
45 translate("The interface OLSRd should serve."))
47 network.template = "cbi/network_netlist"
48 network.widget = "radio"
49 network.nocreate = true
51 mode = i:taboption("general", ListValue, "Mode", translate("Mode"),
52 translate("Interface Mode is used to prevent unnecessary packet forwarding on switched ethernet interfaces. "..
53 "valid Modes are \"mesh\" and \"ether\". Default is \"mesh\"."))
60 weight = i:taboption("general", Value, "Weight", translate("Weight"),
61 translate("When multiple links exist between hosts the weight of interface is used to determine the link to use. "..
62 "Normally the weight is automatically calculated by olsrd based on the characteristics of the interface, "..
63 "but here you can specify a fixed value. Olsrd will choose links with the lowest value.<br />"..
64 "<b>Note:</b> Interface weight is used only when LinkQualityLevel is set to 0. "..
65 "For any other value of LinkQualityLevel, the interface ETX value is used instead."))
66 weight.optional = true
67 weight.datatype = "uinteger"
68 weight.placeholder = "0"
70 lqmult = i:taboption("general", DynamicList, "LinkQualityMult", translate("LinkQuality Multiplicator"),
71 translate("Multiply routes with the factor given here. Allowed values are between 0.01 and 1.0. "..
72 "It is only used when LQ-Level is greater than 0. Examples:<br />"..
73 "reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />"..
74 "reduce LQ to all nodes on this interface by 20%: default 0.8"))
75 lqmult.optional = true
78 lqmult.placeholder = "default 1.0"
80 function lqmult.validate(self, value)
81 for _, v in pairs(value) do
83 local val = util.split(v, " ")
86 if not host or not mult then
87 return nil, translate("LQMult requires two values (IP address or 'default' and multiplicator) seperated by space.")
89 if not (host == "default" or ip.IPv4(host) or ip.IPv6(host)) then
90 return nil, translate("Can only be a valid IPv4 or IPv6 address or 'default'")
92 if not tonumber(mult) or tonumber(mult) > 1 or tonumber(mult) < 0.01 then
93 return nil, translate("Invalid Value for LQMult-Value. Must be between 0.01 and 1.0.")
95 if not mult:match("[0-1]%.[0-9]+") then
96 return nil, translate("Invalid Value for LQMult-Value. You must use a decimal number between 0.01 and 1.0 here.")
103 ip4b = i:taboption("addrs", Value, "Ip4Broadcast", translate("IPv4 broadcast"),
104 translate("IPv4 broadcast address for outgoing OLSR packets. One useful example would be 255.255.255.255. "..
105 "Default is \"0.0.0.0\", which triggers the usage of the interface broadcast IP."))
107 ip4b.datatype = "ip4addr"
108 ip4b.placeholder = "0.0.0.0"
110 ip6m = i:taboption("addrs", Value, "IPv6Multicast", translate("IPv6 multicast"),
111 translate("IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal multicast."))
113 ip6m.datatype = "ip6addr"
114 ip6m.placeholder = "FF02::6D"
116 ip4s = i:taboption("addrs", Value, "IPv4Src", translate("IPv4 source"),
117 translate("IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which triggers usage of the interface IP."))
119 ip4s.datatype = "ip4addr"
120 ip4s.placeholder = "0.0.0.0"
122 ip6s = i:taboption("addrs", Value, "IPv6Src", translate("IPv6 source"),
123 translate("IPv6 src prefix. OLSRd will choose one of the interface IPs which matches the prefix of this parameter. "..
124 "Default is \"0::/0\", which triggers the usage of a not-linklocal interface IP."))
126 ip6s.datatype = "ip6addr"
127 ip6s.placeholder = "0::/0"
129 hi = i:taboption("timing", Value, "HelloInterval", translate("Hello interval"))
131 hi.datatype = "ufloat"
132 hi.placeholder = "5.0"
133 hi.write = write_float
135 hv = i:taboption("timing", Value, "HelloValidityTime", translate("Hello validity time"))
137 hv.datatype = "ufloat"
138 hv.placeholder = "40.0"
139 hv.write = write_float
141 ti = i:taboption("timing", Value, "TcInterval", translate("TC interval"))
143 ti.datatype = "ufloat"
144 ti.placeholder = "2.0"
145 ti.write = write_float
147 tv = i:taboption("timing", Value, "TcValidityTime", translate("TC validity time"))
149 tv.datatype = "ufloat"
150 tv.placeholder = "256.0"
151 tv.write = write_float
153 mi = i:taboption("timing", Value, "MidInterval", translate("MID interval"))
155 mi.datatype = "ufloat"
156 mi.placeholder = "18.0"
157 mi.write = write_float
159 mv = i:taboption("timing", Value, "MidValidityTime", translate("MID validity time"))
161 mv.datatype = "ufloat"
162 mv.placeholder = "324.0"
163 mv.write = write_float
165 ai = i:taboption("timing", Value, "HnaInterval", translate("HNA interval"))
167 ai.datatype = "ufloat"
168 ai.placeholder = "18.0"
169 ai.write = write_float
171 av = i:taboption("timing", Value, "HnaValidityTime", translate("HNA validity time"))
173 av.datatype = "ufloat"
174 av.placeholder = "108.0"
175 av.write = write_float