3 "Project-Id-Version: PACKAGE VERSION\n"
4 "Report-Msgid-Bugs-To: \n"
5 "POT-Creation-Date: 2010-03-30 17:00+0200\n"
6 "PO-Revision-Date: 2014-06-14 18:05+0200\n"
7 "Last-Translator: jame-he <755085131@qq.com>\n"
8 "Language-Team: QQ Group 75543259 <axishero@foxmail.com>\n"
11 "Content-Type: text/plain; charset=UTF-8\n"
12 "Content-Transfer-Encoding: 8bit\n"
13 "Plural-Forms: nplurals=1; plural=0;\n"
14 "X-Generator: Pootle 2.0.6\n"
25 msgid "(Unnamed Entry)"
28 msgid "(Unnamed Rule)"
31 msgid "(Unnamed SNAT)"
34 msgid "-- Please choose --"
40 msgid "<var>%d</var> pkts. per <var>%s</var>"
41 msgstr "<var>%d</var> 包.每 <var>%s</var>"
43 msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
44 msgstr "<var>%d</var> 包. 每 <var>%s</var>, 突发 <var>%d</var> 包."
46 msgid "<var>%s</var> and limit to %s"
47 msgstr "<var>%s</var> 并且限制到 %s"
55 msgid "Add and edit..."
58 msgid "Advanced Settings"
61 msgid "Allow forward from <em>source zones</em>:"
62 msgstr "允许从<em>源区域</em>转发"
64 msgid "Allow forward to <em>destination zones</em>:"
65 msgstr "允许转发到<em>目标区域</em>"
70 msgid "Covered networks"
77 "Custom rules allow you to execute arbritary iptables commands which are not "
78 "otherwise covered by the firewall framework. The commands are executed after "
79 "each firewall restart, right after the default ruleset has been loaded."
81 "自定义规则允许运行一些防火墙没有包含的功能。这些命令将在每次重启防火墙时,在"
84 msgid "Destination IP address"
87 msgid "Destination address"
90 msgid "Destination port"
93 msgid "Destination zone"
96 msgid "Do not rewrite"
99 msgid "Drop invalid packets"
105 msgid "Enable NAT Loopback"
108 msgid "Enable SYN-flood protection"
109 msgstr "启用SYN-flood防御"
111 msgid "Enable logging on this zone"
114 msgid "External IP address"
117 msgid "External port"
120 msgid "External zone"
123 msgid "Extra arguments"
129 msgid "Firewall - Custom Rules"
132 msgid "Firewall - Port Forwards"
135 msgid "Firewall - Traffic Rules"
138 msgid "Firewall - Zone Settings"
141 msgid "Force connection tracking"
153 msgid "From %s in %s"
156 msgid "From %s in %s with source %s"
157 msgstr "来自 %s 位于 %s 带源 %s"
159 msgid "From %s in %s with source %s and %s"
160 msgstr "来自 %s 位于 %s 带源 %s 并且 %s"
162 msgid "General Settings"
168 msgid "IPv4 and IPv6"
183 msgid "Inter-Zone Forwarding"
186 msgid "Internal IP address"
189 msgid "Internal port"
192 msgid "Internal zone"
195 msgid "Limit log messages"
207 msgid "Match ICMP type"
210 msgid "Match forwarded traffic to the given destination port or port range."
211 msgstr "需要匹配转发流量到的目标端口或端口范围"
214 "Match incoming traffic directed at the given destination port or port range "
216 msgstr "需要匹配入站流量到的目标端口或端口范围"
219 "Match incoming traffic originating from the given source port or port range "
220 "on the client host."
221 msgstr "需要匹配入站流量的源端口或端口范围"
232 msgid "New SNAT rule"
235 msgid "New forward rule"
238 msgid "New input rule"
241 msgid "New port forward"
244 msgid "New source NAT"
245 msgstr "新建Source NAT"
247 msgid "Only match incoming traffic directed at the given IP address."
248 msgstr "需要匹配入站流量的源IP"
250 msgid "Only match incoming traffic from these MACs."
251 msgstr "需要匹配入站流量的源MACs(可以为多个)"
253 msgid "Only match incoming traffic from this IP or range."
254 msgstr "需要匹配入站流量的源IP或IP范围"
257 "Only match incoming traffic originating from the given source port or port "
258 "range on the client host"
259 msgstr "需要匹配入站流量的源端口或端口范围"
261 msgid "Open ports on router"
270 msgid "Passes additional arguments to iptables. Use with care!"
271 msgstr "传递到iptables的额外参数。小心使用!"
273 msgid "Port Forwards"
277 "Port forwarding allows remote computers on the Internet to connect to a "
278 "specific computer or service within the private LAN."
279 msgstr "端口转发允许来自Internet的计算机访问私有局域网内的计算机或服务"
285 "Redirect matched incoming traffic to the given port on the internal host"
286 msgstr "重定向匹配的入站流量到内部主机的端口"
288 msgid "Redirect matched incoming traffic to the specified internal host"
289 msgstr "重定向匹配的入站流量到的内部主机"
291 msgid "Restrict Masquerading to given destination subnets"
292 msgstr "要限制IP动态伪装的目标子网"
294 msgid "Restrict Masquerading to given source subnets"
295 msgstr "要限制IP动态伪装的源子网"
297 msgid "Restrict to address family"
300 msgid "Rewrite matched traffic to the given address."
301 msgstr "将匹配流量的源地址改写成指定地址"
304 "Rewrite matched traffic to the given source port. May be left empty to only "
305 "rewrite the IP address."
306 msgstr "将匹配流量的源端口改写成指定端口。也可以留空,只改写IP地址。"
308 msgid "Rewrite to source %s"
311 msgid "Rewrite to source %s, %s"
312 msgstr "源地址改写成 %s, %s"
314 msgid "SNAT IP address"
323 # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
324 # Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua #
325 # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
327 # msgid "Traffic Redirection"
331 # "Traffic redirection allows you to change the destination address of "
332 # "forwarded packets."
341 # msgid "Source zone"
344 # msgid "Source MAC-address"
347 # msgid "Source port"
353 msgid "Source IP address"
356 msgid "Source MAC address"
363 "Source NAT is a specific form of masquerading which allows fine grained "
364 "control over the source IP used for outgoing traffic, for example to map "
365 "multiple WAN addresses to internal subnets."
367 "Source NAT是一种特殊形式的封包伪装,它允许精细的控制传出流量的源IP,例如,将"
370 msgid "Source address"
379 msgid "Start Date (yyyy-mm-dd)"
382 msgid "Start Time (hh:mm:ss)"
385 msgid "Stop Date (yyyy-mm-dd)"
388 msgid "Stop Time (hh:mm:ss)"
395 "The firewall creates zones over your network interfaces to control network "
397 msgstr "防火墙把网络接口分为不同的区域进行管理"
400 "The options below control the forwarding policies between this zone (%s) and "
401 "other zones. <em>Destination zones</em> cover forwarded traffic "
402 "<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
403 "traffic from other zones <strong>targeted at %q</strong>. The forwarding "
404 "rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
405 "<em>not</em> imply a permission to forward from wan to lan as well."
407 "以下选项可以控制区域(%s)和其它区域间的转发规则。 <em>目标区域</em>接收"
408 "<strong>从%q</strong>转发的流量。<em>源区域</em>匹配从<strong>目标为%q</"
409 "strong>的区域的需转发流量。以下规则<em>无法转发</em>,例如:转发lan流量到wan,"
410 "但是<em>不允许</em>从wan转发到lan。"
413 "This page allows you to change advanced properties of the port forwarding "
414 "entry. In most cases there is no need to modify those settings."
415 msgstr "本页面可以更改端口转发的高级设置。大多数情况下,不需要更改这些设置。"
418 "This page allows you to change advanced properties of the traffic rule "
419 "entry, such as matched source and destination hosts."
420 msgstr "本页面可以更改通信规则的高级设置,比如:需匹配的源主机和目标主机。"
424 "This section defines common properties of %q. The <em>input</em> and "
425 "<em>output</em> options set the default policies for traffic entering and "
426 "leaving this zone while the <em>forward</em> option describes the policy for "
427 "forwarded traffic between different networks within the zone. <em>Covered "
428 "networks</em> specifies which available networks are members of this zone."
430 "本节定义 %q 的通用属性, <em>入站数据</em> 和 <em>出站数据</em>规则用于设置数"
431 "据包“进”和“出”路由器(某个接口)默认的转发原则,<em>转发</em>规则用于特定(一"
432 "个或多个)区域的不同子网之间的数据包转发。<em>覆盖网络</em>选择从属于这个区域"
441 msgid "To %s at %s on <var>this device</var>"
442 msgstr "到 %s at %s 位于<var>本设备</var>"
447 msgid "To %s on <var>this device</var>"
448 msgstr "到 %s 位于<var>本设备</var>"
450 msgid "To %s, %s in %s"
451 msgstr "到 %s, %s 位于 %s"
456 msgid "To source port"
459 msgid "Traffic Rules"
463 "Traffic rules define policies for packets traveling between different zones, "
464 "for example to reject traffic between certain hosts or to open WAN ports on "
467 "通信规则定义了不同区域间的流量传送,例如:拒绝一些主机之间的通信、打开到WAN的"
486 "You may specify multiple by selecting \"-- custom --\" and then entering "
487 "protocols separated by space."
488 msgstr "你也可以选择“--自定义--”来定义多个协议,在多个协议间需加空格。"
493 msgid "Zone ⇒ Forwardings"
508 msgid "any router IP"
526 #~ msgid "Destination"
532 #~ msgid "Forward to %s in %s"
533 #~ msgstr "转发到 %s 位于 %s"
535 #~ msgid "Forward to %s, %s in %s"
536 #~ msgstr "转发到 %s, %s 位于 %s"
547 #~ msgid "Do not track forward"
550 #~ msgid "Do not track input"
559 #~ msgid "(optional)"
562 #~ msgid "Intended destination address"
565 #~ msgid "Internal port (optional)"
568 #~ msgid "Advanced Options"
571 #~ msgid "Advanced Rules"
575 #~ "Advanced rules let you customize the firewall to your needs. Only new "
576 #~ "connections will be matched. Packets belonging to already open "
577 #~ "connections are automatically allowed to pass the firewall."
579 #~ "高级规则允许按需定制防火墙。此规则只限制新建立的连接,对于已建立链路的数据"
582 #~ msgid "Custom Rules (/etc/firewall.user)"
583 #~ msgstr "自定义规则(/etc/firewall.user)"
589 #~ "For DNAT, match incoming traffic directed at the given destination ip "
590 #~ "address. For SNAT rewrite the source address to the given address."
592 #~ "DNAT:将目标地址转换为指定的IP地址;SNAT:将源地址转换为指定的IP地址。"
595 #~ "Match incoming traffic originating from the given source port or port "
596 #~ "range on the client host"
597 #~ msgstr "在客户端上,比较输入通道与给定的源端口是否一致。"
602 #~ msgid "Port forwarding"
606 #~ "Port forwarding allows to provide network services in the internal "
607 #~ "network to an external network."
608 #~ msgstr "端口转发-允许外部网络访问内部网络"
610 #~ msgid "Redirection type"
613 #~ msgid "Redirections"
619 #~ msgid "Traffic Redirection"
623 #~ "Traffic redirection allows you to change the destination address of "
624 #~ "forwarded packets."
625 #~ msgstr "流量重定向允许你修改数据包转发地址"