openwrt.git
8 years agoramips: Enable RTC support for PBR-M1
nbd [Fri, 11 Sep 2015 16:32:58 +0000 (16:32 +0000)]
ramips: Enable RTC support for PBR-M1

The PBR-M1 and other upcoming MT7621 boards have RTC chips on them. The
PBR-M1 also selects the kmod-rtc-pcf8563 by default. But the module itself
will not be build because CONFIG_RTC_CLASS is currently not enabled for its
kernel.

Enabling this option should fix the problem of the missing rtc device on
these boards.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46857 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoar71xx: fix ar724x clock calculation
nbd [Fri, 11 Sep 2015 16:32:45 +0000 (16:32 +0000)]
ar71xx: fix ar724x clock calculation

According to the AR7242 datasheet section 2.8, AR724X CPUs use a 40MHz
input clock as the REF_CLK instead of 5MHz.

The correct CPU PLL calculation procedure is as follows:
CPU_PLL = (DIV * REF_CLK) / REF_DIV / 2.

This patch is compatible with the current calculation procedure with default
DIV and REF_DIV values.

Test on both AR7240, AR7241 and AR7242.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46856 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobrcm2708-gpu-fw: update to latest version
nbd [Fri, 11 Sep 2015 16:32:28 +0000 (16:32 +0000)]
brcm2708-gpu-fw: update to latest version

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46855 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobrcm2708: add kmod-sound-soc-raspidac3
nbd [Fri, 11 Sep 2015 16:32:15 +0000 (16:32 +0000)]
brcm2708: add kmod-sound-soc-raspidac3

This adds support for RaspiDAC Rev.3x

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46854 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobrcm2708: update 4.1 patches
nbd [Fri, 11 Sep 2015 16:32:00 +0000 (16:32 +0000)]
brcm2708: update 4.1 patches

As usual, this patches were taken (and rebased) from
https://github.com/raspberrypi/linux/commits/rpi-4.1.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46853 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agotarget: ar71xx: add support for COMFAST CF-E316N v2 board
nbd [Fri, 11 Sep 2015 16:31:35 +0000 (16:31 +0000)]
target: ar71xx: add support for COMFAST CF-E316N v2 board

This adds full support (sans sysupgrading from vendor firmware) for the COMFAST
CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by
Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is
actively refusing to provide GPL'd sources for the OpenWrt version they ship
with the device, damn them).

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46852 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agohostapd: work around unconditional libopenssl build dependency
nbd [Fri, 11 Sep 2015 16:31:18 +0000 (16:31 +0000)]
hostapd: work around unconditional libopenssl build dependency

As the OpenWrt build system only resolves build dependencies per directory,
all hostapd variants were causing libopenssl to be downloaded and built,
not only wpad-mesh. Fix this by applying the same workaround as in
ustream-ssl.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46851 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoopkg: work around unconditional libopenssl build dependency
nbd [Fri, 11 Sep 2015 16:31:01 +0000 (16:31 +0000)]
opkg: work around unconditional libopenssl build dependency

As the OpenWrt build system only resolves build dependencies per directory,
all opkg variants were causing libopenssl to be downloaded and built,
not only opkg-smime. Fix this by applying the same workaround as in
ustream-ssl.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46850 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobase-files: change banner to Designated Driver release
rmilecki [Fri, 11 Sep 2015 08:56:37 +0000 (08:56 +0000)]
base-files: change banner to Designated Driver release

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46846 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agocomgt-ncm: Add possibility to choose PDP context type
cyrus [Fri, 11 Sep 2015 06:46:42 +0000 (06:46 +0000)]
comgt-ncm: Add possibility to choose PDP context type

By setting the option pdptype to IP, IPV6 or IPV4V6 the user can
choose the context type between IPv4, IPv6 and dual stack,
respectively. The default setting is dual stack, except if option
ipv6=0 is specified, in which case IPv4 context is the default.
This allows for an out-of-the-box IPv6 support with modems
utilizing NCM-like protocols.

While we are at it, also add commands for Sierra DirectIP modems
(currently untested), which will allow us to drop the separate
comgt-directip package (once tested and verified working).

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46844 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agouqmi: Add proper IPv6 support
cyrus [Fri, 11 Sep 2015 06:46:40 +0000 (06:46 +0000)]
uqmi: Add proper IPv6 support

Use the new --ip-family option to start both IPv4 and IPv6 sessions
by default. Autoconnect can't be used when starting two sessions,
so revert back to using the client IDs and packet data handles for
handling the network connection.

Some modem firmwares do not implement a RA server, therefore by
default use outband IP configuration and static addressing. Some
other firmwares report bogus IP configuration with the WDS get
current settings command. In this case inband configuration with
DHCP/RA can be optionally enabled by setting option dhcp to 1.

Per 3GPP standard a /64 prefix is served to all clients, which is
extended to LAN as specified in RFC 7278.

v2: Restrict the IPv6 gateway route source address
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46843 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agofirewall: Remove src_port from firewall.config to receive dhcpv6 replies
cyrus [Fri, 11 Sep 2015 06:46:35 +0000 (06:46 +0000)]
firewall: Remove src_port from firewall.config to receive dhcpv6 replies

Seems like my second try was again whitespace broken. Sorry for the noise.

Remove src_port from firewall.config to receive dhcpv6 replies. Fixes #20295.

Signed-off-by: Anselm Eberhardt <a.eberhardt@cygnusnetworks.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46842 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agonetifd: update to the latest version, fixes a WDS STA mode regression caused by multi...
nbd [Thu, 10 Sep 2015 21:00:19 +0000 (21:00 +0000)]
netifd: update to the latest version, fixes a WDS STA mode regression caused by multicast-to-unicast handling (#20466)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46841 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoimagebuilder: run build prereq checks before building image to set up host commands...
nbd [Thu, 10 Sep 2015 11:06:42 +0000 (11:06 +0000)]
imagebuilder: run build prereq checks before building image to set up host commands properly

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46840 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoipq806x: fix uninitialized variable usage in cpufreq-krait
jogo [Thu, 10 Sep 2015 10:09:42 +0000 (10:09 +0000)]
ipq806x: fix uninitialized variable usage in cpufreq-krait

In krait_cpufreq_probe, both freq and max_cpu_freq are never
initialized, so the max_cpu_freq will have a random value at the end.
Fix this by properly initializing max_cpu_freq to 0 and storing the clk
frequency in freq as well, to make it similar to how it's calculated in
krait_set_target.

Fixes the following warnings:

In file included from include/linux/clk.h:16:0,
                 from drivers/cpufreq/cpufreq-krait.c:13:
drivers/cpufreq/cpufreq-krait.c: In function 'krait_cpufreq_probe':
include/linux/kernel.h:714:24: warning: 'freq' may be used uninitialized in this function [-Wmaybe-uninitialized]
  _max1 > _max2 ? _max1 : _max2; })
                        ^
drivers/cpufreq/cpufreq-krait.c:217:25: note: 'freq' was declared here
  unsigned long freq_Hz, freq, max_cpu_freq;
                         ^
In file included from include/linux/clk.h:16:0,
                 from drivers/cpufreq/cpufreq-krait.c:13:
include/linux/kernel.h:714:24: warning: 'max_cpu_freq' may be used uninitialized in this function [-Wmaybe-uninitialized]
  _max1 > _max2 ? _max1 : _max2; })
                        ^
drivers/cpufreq/cpufreq-krait.c:217:31: note: 'max_cpu_freq' was declared here
  unsigned long freq_Hz, freq, max_cpu_freq;

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46839 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoipq806x: modules: fix typo in usb-dwc3-qcom dependencies
jogo [Thu, 10 Sep 2015 10:09:36 +0000 (10:09 +0000)]
ipq806x: modules: fix typo in usb-dwc3-qcom dependencies

The phy driver has its qcom-dwc3 order switched in contrast to the usb
controller driver.

Signed-off-by: Kaspar Schleiser <kaspar@schleiser.de>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46838 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoipq806x: fix R7500 kernel generation
jogo [Thu, 10 Sep 2015 10:09:26 +0000 (10:09 +0000)]
ipq806x: fix R7500 kernel generation

Obviously the dummy rootfs must be after the kernel (uImage), not
included in it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46837 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobusybox: lock: implement -n "Fail rather than wait"
nbd [Wed, 9 Sep 2015 20:36:10 +0000 (20:36 +0000)]
busybox: lock: implement -n "Fail rather than wait"

lock -n is similiar to flock -n. If the lock was already taken,
fail with exit code = 1 and write error message to stderr.

example:
if ! lock -n /tmp/foo ; then
echo lock exits.
else
echo lock was free. But is locked now.
fi
> lock was free. But is locked now.
> lock exists.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46836 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agogeneric: Fix per interface nf_call_iptables setting
nbd [Wed, 9 Sep 2015 18:40:15 +0000 (18:40 +0000)]
generic: Fix per interface nf_call_iptables setting

commit r30917 ("kernel: bypass all netfilter hooks if the sysctls for that
functionality have been disabled - eliminates the overhead of enabling
CONFIG_BRIDGE_NETFILTER in the kernel config") introduced an optimization
which should reduce/eliminate the overhead for traffic send over bridges on
kernels compiled with CONFIG_BRIDGE_NETFILTER=y. But this optimization
breaks the nf_call_iptables per bridge setting which is more fine grained
than the global sysctl net.bridge.bridge-nf-call-iptables setting.

A test reflecting a real world setup was created to identify if this really
eliminates the overhead and if per-bridge nf_call_iptables could be used in
some setups to increase the throughput. A Qualcomm Atheros QCA9558 based
system with one ethernet and an ath9k wifi 3x3 in HT40 mode was used.
Cables from the AP to the wifi station were used to reduce interference
problems during the tests.

The wlan interface was put in one bridge interface called br-wlan. This
bridge usually contains some more wlan interfaces. The eth0 was put in a
second bridge called br-lan. This usually contains some other privileged
wlan or mesh interfaces. Routing was added between br-lan and br-wlan.

Three kernels were tested:

 * (default) OpenWrt kernel for this device
 * (brfilter-global) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y
 * (brfilter-local)  OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y and
    without 644-bridge_optimize_netfilter_hooks.patch

The changes to the the netfilter settings of the bridge were done via:

 * (brfilter-global) /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=1
 * (brfilter-lobal) echo 1 > /sys/class/net/br-lan/bridge/nf_call_iptables
   and/or echo 1 > /sys/class/net/br-wan/bridge/nf_call_iptables

A station connected to the wlan0 (AP) interface was used to send traffic to
a PC connected via ethernet. iperf with 3 concurrent transmissions was used
to generate the traffic.

| kernel          | br-nf-* global | nf-call* iface | download | upload   |
|-----------------|----------------|----------------|----------|----------|
| default         | 0              | -              |      209 |      268 |
| brfilter-global | 0              | -              |      185 |      243 |
| brfilter-local  | 0              | -              |      187 |      243 |
| brfilter-local  | 0              | br-lan         |      157 |      226 |
| brfilter-local  | 0              | br-lan br-wlan |      139 |      161 |
| brfilter-global | 1              | -              |      136 |      162 |

Download/upload results in Mibit/s

It can be seen that the patch doesn't eliminate the overhead. It can also
be seen that the throughput of brfilter-global and brfilter-local with
disabled filtering is the roughly the same. Also the throughput for
brfilter-global and brfilter-local for enabled filtering on all bridges is
roughly the same.

But also the brfilter-local throughput is higher when only br-lan requires
the filtering. This setting would not be possible with
644-bridge_optimize_netfilter_hooks.patch applied and thus can only be
compared with brfilter-global and filtering enabled for all interfaces.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46835 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agolinux: make IPv6 builtin if selected (saves >30KB)
cyrus [Wed, 9 Sep 2015 12:20:36 +0000 (12:20 +0000)]
linux: make IPv6 builtin if selected (saves >30KB)

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46834 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobusybox: fix ip applet and netlink behavior
cyrus [Wed, 9 Sep 2015 10:38:16 +0000 (10:38 +0000)]
busybox: fix ip applet and netlink behavior

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46833 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agopackage: replace ifconfig-usage with ip
cyrus [Tue, 8 Sep 2015 17:44:24 +0000 (17:44 +0000)]
package: replace ifconfig-usage with ip

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46832 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoiproute2: improve ip-full coexistence, remove rt_table
cyrus [Tue, 8 Sep 2015 17:44:17 +0000 (17:44 +0000)]
iproute2: improve ip-full coexistence, remove rt_table

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46831 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobase-files: add /etc/iproute2/rt_tables, replace ifconfig-usage
cyrus [Tue, 8 Sep 2015 17:44:13 +0000 (17:44 +0000)]
base-files: add /etc/iproute2/rt_tables, replace ifconfig-usage

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46830 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobusybox: improve applets & deprecate ifconfig, route
cyrus [Tue, 8 Sep 2015 17:44:10 +0000 (17:44 +0000)]
busybox: improve applets & deprecate ifconfig, route

added: ip addr, ip route, ip link, traceroute6
removed: hostid, devmem, vconfig, arping
deprecated (to be removed): ifconfig, route

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46829 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agokernel: describe bridge patch "multicast to unicast"
rmilecki [Tue, 8 Sep 2015 16:43:32 +0000 (16:43 +0000)]
kernel: describe bridge patch "multicast to unicast"

It was initially added in r41367 by nbd.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46828 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agokernel: describe bridge patch "optimize netfilter hooks"
rmilecki [Tue, 8 Sep 2015 16:43:21 +0000 (16:43 +0000)]
kernel: describe bridge patch "optimize netfilter hooks"

It was initially added in r30917 by nbd.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46827 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agokernel: describe bridge patch "remove IPv6 depependency of bridge in 2.6.38+"
rmilecki [Tue, 8 Sep 2015 16:43:10 +0000 (16:43 +0000)]
kernel: describe bridge patch "remove IPv6 depependency of bridge in 2.6.38+"

It was initially added in r27237 by jow as patch from Jonas.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46826 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agokernel: describe bridge patch "port isolate"
rmilecki [Tue, 8 Sep 2015 16:43:04 +0000 (16:43 +0000)]
kernel: describe bridge patch "port isolate"

It was initially added in r25762 by nbd.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46825 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agokernel: describe bridge patch "always accept EAP"
rmilecki [Tue, 8 Sep 2015 16:42:58 +0000 (16:42 +0000)]
kernel: describe bridge patch "always accept EAP"

It was initially added in r26015 by nbd.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46824 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agokernel: describe bridge patch "no EAP forward"
rmilecki [Tue, 8 Sep 2015 16:42:50 +0000 (16:42 +0000)]
kernel: describe bridge patch "no EAP forward"

It was initially added in r25095 by nbd.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46823 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agokernel: restore 640-bridge_no_eap_forward.patch to its original form
nbd [Tue, 8 Sep 2015 14:29:55 +0000 (14:29 +0000)]
kernel: restore 640-bridge_no_eap_forward.patch to its original form

It was corrupted in r38528. The most obvious symptom is repeated messages like this:

Tue Sep  8 08:25:18 2015 kern.warn kernel: [77141.972226] br-lan: received packet on wlan0 with own address as source address

Signed-off-by: Dmitry Ivanov <dima@ubnt.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46821 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agokernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4
nbd [Tue, 8 Sep 2015 12:31:04 +0000 (12:31 +0000)]
kernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4

Everything except for blkcipher was already built-in, so make blkcipher
built-in as well.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46820 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agomap: be less restrictive when matching lw4over6 prefixes
cyrus [Tue, 8 Sep 2015 12:13:29 +0000 (12:13 +0000)]
map: be less restrictive when matching lw4over6 prefixes

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46819 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoiw: reduce size even more (~12k after gzip)
nbd [Tue, 8 Sep 2015 11:48:48 +0000 (11:48 +0000)]
iw: reduce size even more (~12k after gzip)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46818 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agomusl: add a hack to remove unused crypt() algorithms, saves ~14k after lzma
nbd [Tue, 8 Sep 2015 10:57:11 +0000 (10:57 +0000)]
musl: add a hack to remove unused crypt() algorithms, saves ~14k after lzma

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46816 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agodropbear: remove generation and configuration of DSS keys
cyrus [Tue, 8 Sep 2015 08:59:40 +0000 (08:59 +0000)]
dropbear: remove generation and configuration of DSS keys

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46815 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agodropbear: disable 3des, cbc mode, dss support, saves about 5k gzipped
nbd [Tue, 8 Sep 2015 08:55:10 +0000 (08:55 +0000)]
dropbear: disable 3des, cbc mode, dss support, saves about 5k gzipped

While technically required by the RFC, they are usually completely
unused (DSA), or have security issues (3DES, CBC)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46814 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoargp-standalone: fix build error with gcc 5.2 (#20460)
nbd [Tue, 8 Sep 2015 07:10:07 +0000 (07:10 +0000)]
argp-standalone: fix build error with gcc 5.2 (#20460)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46813 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobrcm47xx: apply serial flash size trick to Netgear WNR1000 V3
rmilecki [Tue, 8 Sep 2015 05:24:57 +0000 (05:24 +0000)]
brcm47xx: apply serial flash size trick to Netgear WNR1000 V3

It also uses different block size just like WGR614 V10.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46810 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoDisable telnet in favor of passwordless SSH
cyrus [Mon, 7 Sep 2015 19:29:25 +0000 (19:29 +0000)]
Disable telnet in favor of passwordless SSH

This enables passworldless login for root via SSH whenever no root
password is set (e.g. after reset, flashing without keeping config
or in failsafe) and removes telnet support alltogether.

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46809 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agouhttpd: update to the latest version, fixes deferred cgi script processing (#20458)
nbd [Mon, 7 Sep 2015 19:18:58 +0000 (19:18 +0000)]
uhttpd: update to the latest version, fixes deferred cgi script processing (#20458)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46807 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobrcm47xx: fix reading WGT634U CFE variables with 4.1
rmilecki [Mon, 7 Sep 2015 16:43:29 +0000 (16:43 +0000)]
brcm47xx: fix reading WGT634U CFE variables with 4.1

This ports fix from r46584 to the 4.1.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46806 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobrcm47xx: add Netgear WNR1000 V3 support in the Linux arch code
rmilecki [Mon, 7 Sep 2015 16:29:21 +0000 (16:29 +0000)]
brcm47xx: add Netgear WNR1000 V3 support in the Linux arch code

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46805 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agomap: ignore insignificant PSID bits
cyrus [Mon, 7 Sep 2015 16:21:15 +0000 (16:21 +0000)]
map: ignore insignificant PSID bits

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46804 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoodhcpd: fix parsing of host entries without duid
cyrus [Mon, 7 Sep 2015 13:31:36 +0000 (13:31 +0000)]
odhcpd: fix parsing of host entries without duid

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46803 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoodhcpd: various bugfixes
cyrus [Mon, 7 Sep 2015 09:49:35 +0000 (09:49 +0000)]
odhcpd: various bugfixes

* ra: don't announce as default router if we aren't (regression)
* ra: reduce maximum announced dns lifetimes due to buggy clients
* dhcpv6: fix mac-based lease-matching

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46802 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agonls.mk: add -rpath-link when needed for NLS support
cyrus [Mon, 7 Sep 2015 08:03:34 +0000 (08:03 +0000)]
nls.mk: add -rpath-link when needed for NLS support

When a package links to a shared library that depends on libiconv or
libintl shared libraries, specifying directory pathes to them via -L
switches is not enough, see "man 1 ld" -rpath-link description.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46801 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agogcc: add missing powerpc patch for 5.2.0
nbd [Mon, 7 Sep 2015 06:59:56 +0000 (06:59 +0000)]
gcc: add missing powerpc patch for 5.2.0

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46800 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agogcc: remove 4.6.3 leftovers
nbd [Sun, 6 Sep 2015 10:07:07 +0000 (10:07 +0000)]
gcc: remove 4.6.3 leftovers

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46799 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agogcc: remove version 4.9-linaro
nbd [Sun, 6 Sep 2015 10:07:03 +0000 (10:07 +0000)]
gcc: remove version 4.9-linaro

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46798 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agouboot-ar71xx: fix gcc 5.2 compile errors
nbd [Sun, 6 Sep 2015 09:57:02 +0000 (09:57 +0000)]
uboot-ar71xx: fix gcc 5.2 compile errors

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46797 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoipq806x: add support for Netgear Nighthawk X4 R7500
jogo [Fri, 4 Sep 2015 14:46:06 +0000 (14:46 +0000)]
ipq806x: add support for Netgear Nighthawk X4 R7500

Add support for the Netgear Nighthawk X4 R7500 and build
appropariate sysupgrade and factory images.

Known issues:
 * 5 GHz wifi not working - there is no quantenna driver
 * One of the USB ports is not working

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46796 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoipq806x: enable ide led trigger
jogo [Fri, 4 Sep 2015 14:45:49 +0000 (14:45 +0000)]
ipq806x: enable ide led trigger

To use gpio leds as ide leds, we need to enable the trigger to be
included in the kernel.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46795 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobase-files: allow setting ide-disk led trigger
jogo [Fri, 4 Sep 2015 14:45:45 +0000 (14:45 +0000)]
base-files: allow setting ide-disk led trigger

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46794 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoipq806x: add support for retrieving macs from mtd
jogo [Fri, 4 Sep 2015 14:45:40 +0000 (14:45 +0000)]
ipq806x: add support for retrieving macs from mtd

Add support for mtd-mac-address for stmac.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46793 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoimage: allow exactly KERNEL_SIZE sized kernels
jogo [Fri, 4 Sep 2015 14:45:16 +0000 (14:45 +0000)]
image: allow exactly KERNEL_SIZE sized kernels

The KERNEL_SIZE should be the maximum size, inclusive, so we need to
check for greater equal, not just greater.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46792 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoimage: move netgear-image to top and rename to -dni
jogo [Fri, 4 Sep 2015 14:45:09 +0000 (14:45 +0000)]
image: move netgear-image to top and rename to -dni

Use the same naming as netgear-chk.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46791 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoar71xx: rename NETGEAR_ variables to their netgear names
jogo [Fri, 4 Sep 2015 14:45:04 +0000 (14:45 +0000)]
ar71xx: rename NETGEAR_ variables to their netgear names

Netgear names them BOARD_ID and HW_ID, so we should do the same.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46790 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoipq806x: build images and add sysupgrade support for AP148
jogo [Fri, 4 Sep 2015 14:45:00 +0000 (14:45 +0000)]
ipq806x: build images and add sysupgrade support for AP148

Add full ubi and sysupgrade images for AP148 and add sysupgrade support
for ipq806x to allow updating the current installation.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46789 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoipq806x: clear IMAGES for devices
jogo [Fri, 4 Sep 2015 14:44:51 +0000 (14:44 +0000)]
ipq806x: clear IMAGES for devices

Ensure that IMAGE-less devices won't keep the IMAGES of any previous
devices.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46788 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoipq806x: wrap legacy image in uImage
jogo [Fri, 4 Sep 2015 14:44:48 +0000 (14:44 +0000)]
ipq806x: wrap legacy image in uImage

Wrap the zImage in a uImage header so we can easily boot it from legacy
u-boots.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46787 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoipq806x: rename "rootfs" to "ubi" on nand
jogo [Fri, 4 Sep 2015 14:44:44 +0000 (14:44 +0000)]
ipq806x: rename "rootfs" to "ubi" on nand

OpenWrt expects the ubi paritition to be named "ubi", not "rootfs".

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46786 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoipq806x: enable smem-parser for nand on AP148
jogo [Fri, 4 Sep 2015 14:44:36 +0000 (14:44 +0000)]
ipq806x: enable smem-parser for nand on AP148

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46785 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobuild: add a build step for generic sysupgrade nand image
jogo [Fri, 4 Sep 2015 14:44:27 +0000 (14:44 +0000)]
build: add a build step for generic sysupgrade nand image

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46784 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoimage: add a build step for building and appending an ubinized rootfs
jogo [Fri, 4 Sep 2015 14:44:10 +0000 (14:44 +0000)]
image: add a build step for building and appending an ubinized rootfs

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46783 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoipq806x: enable ubiblock support
jogo [Fri, 4 Sep 2015 14:44:04 +0000 (14:44 +0000)]
ipq806x: enable ubiblock support

To allow squashfs on ubi, enable ubiblock support in the kernel.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46782 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoodhcp6c: correctly extend prefix from RAs
cyrus [Fri, 4 Sep 2015 06:29:36 +0000 (06:29 +0000)]
odhcp6c: correctly extend prefix from RAs

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46781 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agocomgt/umbim/uqmi: enable RFC 7278 for 3g/4g by default
cyrus [Thu, 3 Sep 2015 15:53:40 +0000 (15:53 +0000)]
comgt/umbim/uqmi: enable RFC 7278 for 3g/4g by default

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46780 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoodhcp6c: add RFC 7278 3gpp IPv6 prefix extension
cyrus [Thu, 3 Sep 2015 15:53:33 +0000 (15:53 +0000)]
odhcp6c: add RFC 7278 3gpp IPv6 prefix extension

Use option extendprefix 1 to enable

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46779 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agomdns: update to the latest version, fixes a spurious build error
nbd [Thu, 3 Sep 2015 13:15:19 +0000 (13:15 +0000)]
mdns: update to the latest version, fixes a spurious build error

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46778 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agouclibc++: fix build with gcc 5.2
nbd [Thu, 3 Sep 2015 13:15:05 +0000 (13:15 +0000)]
uclibc++: fix build with gcc 5.2

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46777 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agolibpcap: update to version 1.7.4
nbd [Thu, 3 Sep 2015 13:14:56 +0000 (13:14 +0000)]
libpcap: update to version 1.7.4

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46776 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agogdb: update to the latest version, fixes a build error with gcc 5.2
nbd [Thu, 3 Sep 2015 13:14:50 +0000 (13:14 +0000)]
gdb: update to the latest version, fixes a build error with gcc 5.2

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46775 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agogcc: add ARM codegen fix from PR 65932
nbd [Thu, 3 Sep 2015 13:14:44 +0000 (13:14 +0000)]
gcc: add ARM codegen fix from PR 65932

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46774 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoar7: fix HIGHMEM_START (#20427)
nbd [Wed, 2 Sep 2015 16:22:44 +0000 (16:22 +0000)]
ar7: fix HIGHMEM_START (#20427)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46773 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agomusl: update to version 1.1.11
nbd [Wed, 2 Sep 2015 15:44:17 +0000 (15:44 +0000)]
musl: update to version 1.1.11

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46772 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobase-files: add /etc/hosts entries for ::1, ff02::1 and ff02::2
jow [Wed, 2 Sep 2015 11:54:03 +0000 (11:54 +0000)]
base-files: add /etc/hosts entries for ::1, ff02::1 and ff02::2

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46771 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agodnsmasq: make /tmp/dnsmasq.d and /tmp/hosts preferred over UCI settings
cyrus [Wed, 2 Sep 2015 11:49:00 +0000 (11:49 +0000)]
dnsmasq: make /tmp/dnsmasq.d and /tmp/hosts preferred over UCI settings

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46770 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agodropbear: bump to 2015.68
cyrus [Wed, 2 Sep 2015 11:48:57 +0000 (11:48 +0000)]
dropbear: bump to 2015.68

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46769 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agokernel: update 3.18 to 3.18.21
jogo [Wed, 2 Sep 2015 10:18:15 +0000 (10:18 +0000)]
kernel: update 3.18 to 3.18.21

Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46768 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoramips: fix devicetree corruption with some boot loaders if the caches are not ready...
nbd [Wed, 2 Sep 2015 09:24:05 +0000 (09:24 +0000)]
ramips: fix devicetree corruption with some boot loaders if the caches are not ready at boot

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46766 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agokernel: bridge, multicast-to-unicast: fix echoes on STA
nbd [Wed, 2 Sep 2015 09:23:59 +0000 (09:23 +0000)]
kernel: bridge, multicast-to-unicast: fix echoes on STA

Currently, multicast packets from an STA are sent to any according
multicast listener directly through the bridge multicast-to-unicast
feature. Unfortunately, so far this includes the originating STA, too,
resulting in multicast packets being echo'ed back to the originating STA
if it itself is a multicast listener for that group.

This behaviour breaks IPv6 duplicate address detection: An IPv6 Neighbor
Solicitation for IPv6 Duplicate Address Detection is being echo'ed back,
resulting in the host falsely detecting an address collision, which
makes the node unable to claim an IPv6 address and use IPv6 in general.

Mac80211 unfortunately only prevents the echoes for us for multicast
frames. For the multicast frames cast to a unicast destination we'll
need to take care of excluding the originator ourselves.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46765 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agomdns: fix having mulitple network entries in uci
nbd [Wed, 2 Sep 2015 09:23:52 +0000 (09:23 +0000)]
mdns: fix having mulitple network entries in uci

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46764 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agomap: add debug-code for mapcalc
cyrus [Tue, 1 Sep 2015 18:48:22 +0000 (18:48 +0000)]
map: add debug-code for mapcalc

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46763 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agopolarssl: bump to 1.3.12
cyrus [Tue, 1 Sep 2015 18:48:15 +0000 (18:48 +0000)]
polarssl: bump to 1.3.12

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46762 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoodhcpd: fix incorrect address assignment for DHCPv6
cyrus [Tue, 1 Sep 2015 13:31:00 +0000 (13:31 +0000)]
odhcpd: fix incorrect address assignment for DHCPv6

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46761 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agolantiq: remove dead EASY33016 image recipe
jogo [Sun, 30 Aug 2015 12:18:22 +0000 (12:18 +0000)]
lantiq: remove dead EASY33016 image recipe

Support for lantiq_svip_be has been removed a while ago, so EASY33016
images weren't buildable anymore. Remove the recipes as well as gzip
compressed kernel support, as EASY33016 was the last user of it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46760 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoramips: disable the openwrt commandline hack
jogo [Sun, 30 Aug 2015 12:18:14 +0000 (12:18 +0000)]
ramips: disable the openwrt commandline hack

We don't make use of it, so no need to have it enabled.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46759 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agomalta: disable the openwrt commandline hack
jogo [Sun, 30 Aug 2015 12:18:05 +0000 (12:18 +0000)]
malta: disable the openwrt commandline hack

We don't make use of it, so no need to have it enabled.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46758 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobrcm63xx: disable the openwrt commandline hack
jogo [Sun, 30 Aug 2015 12:18:00 +0000 (12:18 +0000)]
brcm63xx: disable the openwrt commandline hack

We don't make use of it, so no need to have it enabled.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46757 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobrcm47xx: disable the openwrt commandline hack
jogo [Sun, 30 Aug 2015 12:17:57 +0000 (12:17 +0000)]
brcm47xx: disable the openwrt commandline hack

We don't make use of it, so no need to have it enabled.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46756 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoath25: disable the openwrt commandline hack
jogo [Sun, 30 Aug 2015 12:17:56 +0000 (12:17 +0000)]
ath25: disable the openwrt commandline hack

We don't make use of it, so no need to have it enabled.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46755 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agoadm5120: disable the openwrt commandline hack
jogo [Sun, 30 Aug 2015 12:17:54 +0000 (12:17 +0000)]
adm5120: disable the openwrt commandline hack

We don't make use of it, so no need to have it enabled.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46754 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobrcm63xx: remove legacy led/button related patches
jogo [Sun, 30 Aug 2015 12:17:52 +0000 (12:17 +0000)]
brcm63xx: remove legacy led/button related patches

We register all gpio buttons and leds through DT, so no need to keep
fixes/additions for the platform data based bay.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46753 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobrcm63xx: add Comtrend VR-3026e support
jogo [Sun, 30 Aug 2015 12:17:46 +0000 (12:17 +0000)]
brcm63xx: add Comtrend VR-3026e support

Add support for Comtrend VR-3026e v1.
The device is almost identical to the Comtrend VR-3025un.

Signed-off-by: Martin Tesar <tesarmar@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46752 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobroadcom-wl: add interface after bridge is up
hauke [Sat, 29 Aug 2015 20:05:04 +0000 (20:05 +0000)]
broadcom-wl: add interface after bridge is up

Without this patch adding the wifi device to the bridge may fail
because the bridge is not already configured when the wifi device gets
configured. This patch makes broadcom-wl wait till the bridge is ready.

This fixes #17262

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46749 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobroadcom-wl: fix bash comparison error
hauke [Sat, 29 Aug 2015 17:38:15 +0000 (17:38 +0000)]
broadcom-wl: fix bash comparison error

This fixes #17495

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46746 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobroadcom-wl: fix section mismatches in broadcom-wl driver
hauke [Sat, 29 Aug 2015 17:37:41 +0000 (17:37 +0000)]
broadcom-wl: fix section mismatches in broadcom-wl driver

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46745 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 years agobroadcom-wl: fix build with kernel 4.1
hauke [Sat, 29 Aug 2015 17:37:09 +0000 (17:37 +0000)]
broadcom-wl: fix build with kernel 4.1

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46744 3c298f89-4303-0410-b956-a3cf2f4a3e73