+++ /dev/null
---- a/arch/arm/common/gic.c
-+++ b/arch/arm/common/gic.c
-@@ -32,6 +32,8 @@
- #include <asm/irq.h>
- #include <asm/mach/irq.h>
- #include <asm/hardware/gic.h>
-+#include <linux/module.h>
-+
-
- static DEFINE_SPINLOCK(irq_controller_lock);
-
-@@ -90,7 +92,7 @@ static void gic_ack_irq(unsigned int irq
- spin_unlock(&irq_controller_lock);
- }
-
--static void gic_mask_irq(unsigned int irq)
-+void gic_mask_irq(unsigned int irq)
- {
- u32 mask = 1 << (irq % 32);
-
-@@ -175,6 +177,109 @@ void __init gic_cascade_irq(unsigned int
- set_irq_chained_handler(irq, gic_handle_cascade_irq);
- }
-
-+
-+// type: level or edge
-+// 0 - level high active, 1 - rising edge sensitive
-+void set_interrupt_type_by_base(void __iomem *base, int id, u32 type)
-+{
-+ unsigned char int_type_bit=0;
-+ u32 gic_v=0;
-+
-+ // judge gic offset
-+ //printk("gic addr: %#x\n", id/16*4 + 0xc00);
-+ //printk("gic addr bits: %#x\n", id%16*2);
-+ int_type_bit=(id%16*2+1);
-+
-+ gic_v = readl(base + GIC_DIST_CONFIG + id/16*4);
-+
-+ gic_v &= (~(1 << int_type_bit));
-+ gic_v |= ( type << int_type_bit);
-+
-+ writel(gic_v, base + GIC_DIST_CONFIG + id/16*4);
-+}
-+
-+// type: level or edge
-+// 0 - level high active, 1 - rising edge sensitive
-+void set_interrupt_type(int id, u32 type)
-+{
-+ set_interrupt_type_by_base((void __iomem *) CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT, id, type);
-+}
-+
-+void get_interrupt_type_by_base(void __iomem *base, u32 id, u32 *type)
-+{
-+ unsigned char int_type_bit=0;
-+ u32 gic_v=0;
-+
-+ // judge gic offset
-+ int_type_bit=(id%16*2+1);
-+
-+ //gic_v = readl(base + GIC_DIST_CONFIG + 4);
-+ gic_v = readl(base + GIC_DIST_CONFIG + id/16*4);
-+
-+ *type = ((gic_v >> int_type_bit) & 0x1);
-+
-+ //writel(0, base + GIC_DIST_CONFIG + id/16*4);
-+}
-+
-+void get_interrupt_type(u32 id, u32 *type)
-+{
-+ get_interrupt_type_by_base((void __iomem *) CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT, id, type);
-+}
-+
-+
-+
-+// set interrupt priority
-+void set_interrupt_pri_by_base(void __iomem *base, u32 id, u32 pri)
-+{
-+ unsigned char int_type_bit=0;
-+ u32 gic_v=0;
-+
-+
-+ // judge gic offset
-+ int_type_bit=(id%4*8+4);
-+
-+ gic_v = readl(base + GIC_DIST_PRI + id/4*4);
-+
-+ gic_v &= (~(0xf << int_type_bit));
-+ gic_v |= (pri << int_type_bit);
-+
-+ writel(gic_v, base + GIC_DIST_PRI + id/4*4);
-+
-+ gic_v = 0;
-+ gic_v = readl(base + GIC_DIST_PRI + id/4*4);
-+ //printk("read gic_v: %x\n", gic_v);
-+}
-+
-+void set_interrupt_pri(u32 id, u32 pri)
-+{
-+ set_interrupt_pri_by_base((void __iomem *) CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT, id, pri);
-+}
-+
-+void get_interrupt_pri_by_base(void __iomem *base, int id, u32 *type)
-+{
-+ unsigned char int_type_bit=0;
-+ u32 gic_v=0;
-+
-+ // judge gic offset
-+ int_type_bit=(id%4*8+4);
-+
-+ gic_v = readl(base + GIC_DIST_PRI + id/4*4);
-+
-+ //printk("int_type_bit: %d\n", int_type_bit);
-+ //printk("gic_v: %#x\n", gic_v);
-+ *type = ((gic_v >> int_type_bit) & 0xf);
-+ //gic_v &= (~(1 << int_type_bit));
-+ //gic_v |= ( type << int_type_bit);
-+
-+ //writel(0, base + GIC_DIST_CONFIG + id/16*4);
-+}
-+
-+void get_interrupt_pri(int id, u32 *pri)
-+{
-+ get_interrupt_pri_by_base((void __iomem *) CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT, id, pri);
-+}
-+
-+
- void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
- unsigned int irq_start)
- {
-@@ -254,6 +359,12 @@ void __cpuinit gic_cpu_init(unsigned int
- writel(1, base + GIC_CPU_CTRL);
- }
-
-+void cns3xxx_write_pri_mask(u8 pri_mask)
-+{
-+ writel(pri_mask, (void __iomem *) CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT + GIC_CPU_PRIMASK);
-+}
-+
-+
- #ifdef CONFIG_SMP
- void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
- {
---- a/arch/arm/include/asm/cacheflush.h
-+++ b/arch/arm/include/asm/cacheflush.h
-@@ -280,6 +280,35 @@ extern void dmac_flush_range(const void
-
- #endif
-
-+#ifdef CONFIG_CPU_NO_CACHE_BCAST
-+enum smp_dma_cache_type {
-+ SMP_DMA_CACHE_INV,
-+ SMP_DMA_CACHE_CLEAN,
-+ SMP_DMA_CACHE_FLUSH,
-+};
-+
-+extern void smp_dma_cache_op(int type, const void *start, const void *end);
-+
-+static inline void smp_dma_inv_range(const void *start, const void *end)
-+{
-+ smp_dma_cache_op(SMP_DMA_CACHE_INV, start, end);
-+}
-+
-+static inline void smp_dma_clean_range(const void *start, const void *end)
-+{
-+ smp_dma_cache_op(SMP_DMA_CACHE_CLEAN, start, end);
-+}
-+
-+static inline void smp_dma_flush_range(const void *start, const void *end)
-+{
-+ smp_dma_cache_op(SMP_DMA_CACHE_FLUSH, start, end);
-+}
-+#else
-+#define smp_dma_inv_range dmac_inv_range
-+#define smp_dma_clean_range dmac_clean_range
-+#define smp_dma_flush_range dmac_flush_range
-+#endif
-+
- #ifdef CONFIG_OUTER_CACHE
-
- extern struct outer_cache_fns outer_cache;
---- /dev/null
-+++ b/arch/arm/include/asm/hardware/arm_twd.h
-@@ -0,0 +1,21 @@
-+#ifndef __ASM_HARDWARE_TWD_H
-+#define __ASM_HARDWARE_TWD_H
-+
-+#define TWD_TIMER_LOAD 0x00
-+#define TWD_TIMER_COUNTER 0x04
-+#define TWD_TIMER_CONTROL 0x08
-+#define TWD_TIMER_INTSTAT 0x0C
-+
-+#define TWD_WDOG_LOAD 0x20
-+#define TWD_WDOG_COUNTER 0x24
-+#define TWD_WDOG_CONTROL 0x28
-+#define TWD_WDOG_INTSTAT 0x2C
-+#define TWD_WDOG_RESETSTAT 0x30
-+#define TWD_WDOG_DISABLE 0x34
-+
-+#define TWD_TIMER_CONTROL_ENABLE (1 << 0)
-+#define TWD_TIMER_CONTROL_ONESHOT (0 << 1)
-+#define TWD_TIMER_CONTROL_PERIODIC (1 << 1)
-+#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2)
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/include/asm/hardware/cache-l2cc.h
-@@ -0,0 +1,79 @@
-+/*******************************************************************************
-+ *
-+ * arch/arm/include/asm/hardware/cache-l2cc.h
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ *
-+ ******************************************************************************/
-+
-+#ifndef __ASM_ARM_HARDWARE_L2_H
-+#define __ASM_ARM_HARDWARE_L2_H
-+
-+#define L2CC_CACHE_ID 0x000
-+#define L2CC_CACHE_TYPE 0x004
-+#define L2CC_CTRL 0x100
-+#define L2CC_AUX_CTRL 0x104
-+#define L2CC_TAG_RAM_LATENCY_CTRL 0x108
-+#define L2CC_DATA_RAM_LATENCY_CTRL 0x10C
-+#define L2CC_EVENT_CNT_CTRL 0x200
-+#define L2CC_EVENT_CNT1_CFG 0x204
-+#define L2CC_EVENT_CNT0_CFG 0x208
-+#define L2CC_EVENT_CNT1_VAL 0x20C
-+#define L2CC_EVENT_CNT0_VAL 0x210
-+#define L2CC_INTR_MASK 0x214
-+#define L2CC_MASKED_INTR_STAT 0x218
-+#define L2CC_RAW_INTR_STAT 0x21C
-+#define L2CC_INTR_CLEAR 0x220
-+#define L2CC_CACHE_SYNC 0x730
-+#define L2CC_INV_LINE_PA 0x770
-+#define L2CC_INV_WAY 0x77C
-+#define L2CC_CLEAN_LINE_PA 0x7B0
-+#define L2CC_CLEAN_LINE_IDX 0x7B8
-+#define L2CC_CLEAN_WAY 0x7BC
-+#define L2CC_CLEAN_INV_LINE_PA 0x7F0
-+#define L2CC_CLEAN_INV_LINE_IDX 0x7F8
-+#define L2CC_CLEAN_INV_WAY 0x7FC
-+#define L2CC_LOCKDOWN_0_WAY_D 0x900
-+#define L2CC_LOCKDOWN_0_WAY_I 0x904
-+#define L2CC_LOCKDOWN_1_WAY_D 0x908
-+#define L2CC_LOCKDOWN_1_WAY_I 0x90C
-+#define L2CC_LOCKDOWN_2_WAY_D 0x910
-+#define L2CC_LOCKDOWN_2_WAY_I 0x914
-+#define L2CC_LOCKDOWN_3_WAY_D 0x918
-+#define L2CC_LOCKDOWN_3_WAY_I 0x91C
-+#define L2CC_LOCKDOWN_4_WAY_D 0x920
-+#define L2CC_LOCKDOWN_4_WAY_I 0x924
-+#define L2CC_LOCKDOWN_5_WAY_D 0x928
-+#define L2CC_LOCKDOWN_5_WAY_I 0x92C
-+#define L2CC_LOCKDOWN_6_WAY_D 0x930
-+#define L2CC_LOCKDOWN_6_WAY_I 0x934
-+#define L2CC_LOCKDOWN_7_WAY_D 0x938
-+#define L2CC_LOCKDOWN_7_WAY_I 0x93C
-+#define L2CC_LOCKDOWN_LINE_EN 0x950
-+#define L2CC_UNLOCK_ALL_LINE_WAY 0x954
-+#define L2CC_ADDR_FILTER_START 0xC00
-+#define L2CC_ADDR_FILTER_END 0xC04
-+#define L2CC_DEBUG_CTRL 0xF40
-+
-+#ifndef __ASSEMBLY__
-+extern void __init l2cc_init(void __iomem *base);
-+#endif
-+
-+#endif
---- a/arch/arm/include/asm/hardware/gic.h
-+++ b/arch/arm/include/asm/hardware/gic.h
-@@ -37,6 +37,13 @@ void gic_dist_init(unsigned int gic_nr,
- void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
- void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
- void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
-+
-+void cns3xxx_write_pri_mask(u8 pri_mask);
-+void set_interrupt_type(int id, u32 type);
-+void get_interrupt_type(u32 id, u32 *type);
-+void set_interrupt_pri(u32 id, u32 pri);
-+void get_interrupt_pri(int id, u32 *pri);
-+
- #endif
-
- #endif
---- a/arch/arm/include/asm/mach/pci.h
-+++ b/arch/arm/include/asm/mach/pci.h
-@@ -20,6 +20,9 @@ struct hw_pci {
- void (*postinit)(void);
- u8 (*swizzle)(struct pci_dev *dev, u8 *pin);
- int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
-+#ifdef CONFIG_PCI_DOMAINS
-+ int nr_domains;
-+#endif
- };
-
- /*
-@@ -37,8 +40,12 @@ struct pci_sys_data {
- /* IRQ mapping */
- int (*map_irq)(struct pci_dev *, u8, u8);
- struct hw_pci *hw;
-+#ifdef CONFIG_PCI_DOMAINS
-+ int domain;
-+#endif
- };
-
-+
- /*
- * This is the standard PCI-PCI bridge swizzling algorithm.
- */
---- a/arch/arm/include/asm/pci.h
-+++ b/arch/arm/include/asm/pci.h
-@@ -25,6 +25,11 @@ static inline void pcibios_penalize_isa_
- /* We don't do dynamic PCI IRQ allocation */
- }
-
-+#ifdef CONFIG_PCI_DOMAINS
-+int pci_domain_nr(struct pci_bus *bus);
-+int pci_proc_domain(struct pci_bus *bus);
-+#endif
-+
- /*
- * The PCI address space does equal the physical memory address space.
- * The networking and block device layers use this boolean for bounce
---- a/arch/arm/include/asm/xor.h
-+++ b/arch/arm/include/asm/xor.h
-@@ -132,10 +132,43 @@ static struct xor_block_template xor_blo
- .do_5 = xor_arm4regs_5,
- };
-
-+#ifdef CONFIG_CNS3XXX_RAID
-+extern void do_cns_rdma_xorgen(unsigned int src_no, unsigned int bytes,
-+ void **bh_ptr, void *dst_ptr);
-+/*
-+ * We create these funcs/template just for benchmark reference.
-+ */
-+static void xor_cns_raid_2(unsigned long bytes, unsigned long *p1,
-+ unsigned long *p2)
-+{
-+ void *src[2];
-+
-+ src[0] = p2;
-+ src[1] = p1;
-+ do_cns_rdma_xorgen(2, bytes, src, (void *)p2);
-+}
-+
-+static struct xor_block_template xor_block_cnsraid = {
-+ .name = "CNS-RAID",
-+ .do_2 = xor_cns_raid_2,
-+};
-+#endif /* CONFIG_CNS3XXX_RAID */
-+
- #undef XOR_TRY_TEMPLATES
-+
-+#ifdef CONFIG_CNS3XXX_RAID
-+#define XOR_TRY_TEMPLATES \
-+ do { \
-+ xor_speed(&xor_block_arm4regs); \
-+ xor_speed(&xor_block_8regs); \
-+ xor_speed(&xor_block_32regs); \
-+ xor_speed(&xor_block_cnsraid); \
-+ } while (0)
-+#else
- #define XOR_TRY_TEMPLATES \
- do { \
- xor_speed(&xor_block_arm4regs); \
- xor_speed(&xor_block_8regs); \
- xor_speed(&xor_block_32regs); \
- } while (0)
-+#endif /* CONFIG_CNS3XXX_RAID */
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -193,7 +193,7 @@ menu "System Type"
-
- choice
- prompt "ARM system type"
-- default ARCH_VERSATILE
-+ default ARCH_CNS3XXX
-
- config ARCH_AAEC2000
- bool "Agilent AAEC-2000 based"
-@@ -235,6 +235,17 @@ config ARCH_VERSATILE
- help
- This enables support for ARM Ltd Versatile board.
-
-+config ARCH_CNS3XXX
-+ bool "Cavium Networks CNS3XXX family"
-+ select ARM_AMBA
-+ select HAVE_CLK
-+ select COMMON_CLKDEV
-+ select GENERIC_TIME
-+ select GENERIC_CLOCKEVENTS
-+ select ARCH_REQUIRE_GPIOLIB
-+ help
-+ This enables support for Cavium Networks CNS3XXX boards.
-+
- config ARCH_AT91
- bool "Atmel AT91"
- select GENERIC_GPIO
-@@ -715,6 +726,8 @@ source "arch/arm/mach-aaec2000/Kconfig"
-
- source "arch/arm/mach-realview/Kconfig"
-
-+source "arch/arm/mach-cns3xxx/Kconfig"
-+
- source "arch/arm/mach-at91/Kconfig"
-
- source "arch/arm/plat-mxc/Kconfig"
-@@ -768,7 +781,7 @@ endif
-
- config ARM_ERRATA_411920
- bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
-- depends on CPU_V6 && !SMP
-+ depends on CPU_V6 && !SMP && !ARCH_CNS3XXX
- help
- Invalidation of the Instruction Cache operation can
- fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
-@@ -849,13 +862,17 @@ config ISA_DMA_API
- bool
-
- config PCI
-- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
-+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_CNS3XXX || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
-+config PCI_DOMAINS
-+ def_bool y
-+ depends on PCI && ARCH_CNS3XXX
-+
- config PCI_SYSCALL
- def_bool PCI
-
-@@ -873,6 +890,8 @@ config PCI_HOST_ITE8152
-
- source "drivers/pci/Kconfig"
-
-+source "drivers/pci/pcie/Kconfig"
-+
- source "drivers/pcmcia/Kconfig"
-
- endmenu
-@@ -884,10 +903,10 @@ source "kernel/time/Kconfig"
- config SMP
- bool "Symmetric Multi-Processing (EXPERIMENTAL)"
- depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
-- MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
-+ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_CNS3XXX || ARCH_OMAP4)
- depends on GENERIC_CLOCKEVENTS
- select USE_GENERIC_SMP_HELPERS
-- select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
-+ select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_CNS3XXX || ARCH_OMAP4)
- help
- This enables support for systems with more than one CPU. If you have
- a system with only one CPU, like most personal computers, say N. If
-@@ -944,7 +963,7 @@ config NR_CPUS
- int "Maximum number of CPUs (2-32)"
- range 2 32
- depends on SMP
-- default "4"
-+ default "2"
-
- config HOTPLUG_CPU
- bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-@@ -955,10 +974,10 @@ config HOTPLUG_CPU
-
- config LOCAL_TIMERS
- bool "Use local timer interrupts"
-- depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
-+ depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || ARCH_CNS3XXX || \
- REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
- default y
-- select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
-+ select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_CNS3XXX || ARCH_OMAP4)
- help
- Enable support for local timers on SMP platforms, rather then the
- legacy IPI broadcast method. Local timers allows the system
---- a/arch/arm/kernel/bios32.c
-+++ b/arch/arm/kernel/bios32.c
-@@ -531,6 +531,7 @@ static void __init pcibios_init_hw(struc
- sys->busnr = busnr;
- sys->swizzle = hw->swizzle;
- sys->map_irq = hw->map_irq;
-+ sys->domain = hw->nr_domains;
- sys->resource[0] = &ioport_resource;
- sys->resource[1] = &iomem_resource;
-
-@@ -694,3 +695,20 @@ int pci_mmap_page_range(struct pci_dev *
-
- return 0;
- }
-+#ifdef CONFIG_PCI_DOMAINS
-+int pci_domain_nr(struct pci_bus *bus)
-+{
-+
-+ //struct pci_sysdata *sd = bus->sysdata;
-+ struct pci_sys_data *sd = bus->sysdata;
-+ return sd->domain;
-+
-+}
-+EXPORT_SYMBOL(pci_domain_nr);
-+
-+int pci_proc_domain(struct pci_bus *bus)
-+{
-+ return pci_domain_nr(bus);
-+}
-+EXPORT_SYMBOL(pci_proc_domain);
-+#endif
---- a/arch/arm/kernel/entry-armv.S
-+++ b/arch/arm/kernel/entry-armv.S
-@@ -38,6 +38,12 @@
- bne asm_do_IRQ
-
- #ifdef CONFIG_SMP
-+
-+ test_for_cache_ipi r0, r6, r5, lr
-+ movne r0, sp
-+ adrne lr, 1b
-+ bne do_cache_IPI
-+
- /*
- * XXX
- *
---- a/arch/arm/kernel/smp.c
-+++ b/arch/arm/kernel/smp.c
-@@ -58,12 +58,20 @@ static DEFINE_PER_CPU(struct ipi_data, i
- .lock = SPIN_LOCK_UNLOCKED,
- };
-
-+#ifdef CONFIG_CPU_NO_CACHE_BCAST_DEBUG
-+static DEFINE_PER_CPU(unsigned long,dma_cache_counter) = 0;
-+unsigned long bcache_bitmap = 0;
-+#endif
-+
- enum ipi_msg_type {
- IPI_TIMER,
- IPI_RESCHEDULE,
- IPI_CALL_FUNC,
- IPI_CALL_FUNC_SINGLE,
- IPI_CPU_STOP,
-+#ifdef CONFIG_CPU_NO_CACHE_BCAST
-+ IPI_DMA_CACHE,
-+#endif
- };
-
- int __cpuinit __cpu_up(unsigned int cpu)
-@@ -349,10 +357,17 @@ static void send_ipi_message(const struc
- * Call the platform specific cross-CPU call function.
- */
- smp_cross_call(mask);
--
- local_irq_restore(flags);
- }
-
-+static void send_ipi_message_cache(const struct cpumask *mask)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+ smp_cross_call_cache(mask);
-+ local_irq_restore(flags);
-+}
- void arch_send_call_function_ipi_mask(const struct cpumask *mask)
- {
- send_ipi_message(mask, IPI_CALL_FUNC);
-@@ -373,6 +388,13 @@ void show_ipi_list(struct seq_file *p)
- seq_printf(p, " %10lu", per_cpu(ipi_data, cpu).ipi_count);
-
- seq_putc(p, '\n');
-+
-+#ifdef CONFIG_CPU_NO_CACHE_BCAST_DEBUG
-+ seq_puts(p, " dc: ");
-+ for_each_present_cpu(cpu)
-+ seq_printf(p, " %10lu", per_cpu(dma_cache_counter, cpu));
-+ seq_putc(p, '\n');
-+#endif
- }
-
- void show_local_irqs(struct seq_file *p)
-@@ -472,6 +494,10 @@ static void ipi_cpu_stop(unsigned int cp
- cpu_relax();
- }
-
-+#ifdef CONFIG_CPU_NO_CACHE_BCAST
-+static void ipi_dma_cache_op(unsigned int cpu);
-+#endif
-+
- /*
- * Main handler for inter-processor interrupts
- *
-@@ -531,6 +557,16 @@ asmlinkage void __exception do_IPI(struc
- ipi_cpu_stop(cpu);
- break;
-
-+#ifdef CONFIG_CPU_NO_CACHE_BCAST
-+ case IPI_DMA_CACHE:
-+#ifdef CONFIG_CPU_NO_CACHE_BCAST_DEBUG
-+ //get_cpu_var(dma_cache_counter)++;
-+ //put_cpu_var(dma_cache_counter);
-+#endif
-+ ipi_dma_cache_op(cpu);
-+ break;
-+#endif
-+
- default:
- printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%x\n",
- cpu, nextmsg);
-@@ -542,6 +578,19 @@ asmlinkage void __exception do_IPI(struc
- set_irq_regs(old_regs);
- }
-
-+asmlinkage void __exception do_cache_IPI(struct pt_regs *regs)
-+{
-+ unsigned int cpu = smp_processor_id();
-+ struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
-+ struct pt_regs *old_regs = set_irq_regs(regs);
-+
-+ ipi->ipi_count++;
-+
-+ ipi_dma_cache_op(cpu);
-+
-+ set_irq_regs(old_regs);
-+}
-+
- void smp_send_reschedule(int cpu)
- {
- send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
-@@ -692,3 +741,115 @@ void flush_tlb_kernel_range(unsigned lon
- } else
- local_flush_tlb_kernel_range(start, end);
- }
-+
-+#ifdef CONFIG_CPU_NO_CACHE_BCAST
-+/*
-+ * DMA cache maintenance operations on SMP if the automatic hardware
-+ * broadcasting is not available
-+ */
-+struct smp_dma_cache_struct {
-+ int type;
-+ const void *start;
-+ const void *end;
-+ char unfinished;
-+};
-+
-+static struct smp_dma_cache_struct smp_dma_cache_data[3];
-+static DEFINE_SPINLOCK(smp_dma_cache_lock);
-+
-+static void local_dma_cache_op(int type, const void *start, const void *end)
-+{
-+ switch (type) {
-+ case SMP_DMA_CACHE_INV:
-+ dmac_inv_range(start, end);
-+ break;
-+ case SMP_DMA_CACHE_CLEAN:
-+ dmac_clean_range(start, end);
-+ break;
-+ case SMP_DMA_CACHE_FLUSH:
-+ dmac_flush_range(start, end);
-+ break;
-+ default:
-+ printk(KERN_CRIT "CPU%u: Unknown SMP DMA cache type %d\n",
-+ smp_processor_id(), type);
-+ }
-+}
-+
-+/*
-+ * This function must be executed with interrupts disabled.
-+ */
-+static void ipi_dma_cache_op(unsigned int cpu)
-+{
-+ unsigned long flags;
-+ int type;
-+ const void *start;
-+ const void *end;
-+
-+ /* check for spurious IPI */
-+ spin_lock_irqsave(&smp_dma_cache_lock, flags);
-+ if (!test_bit(cpu, &bcache_bitmap))
-+ goto out;
-+
-+ type = smp_dma_cache_data[cpu].type;
-+ start = smp_dma_cache_data[cpu].start;
-+ end = smp_dma_cache_data[cpu].end;
-+ spin_unlock_irqrestore(&smp_dma_cache_lock, flags);
-+
-+
-+ local_dma_cache_op(type, start, end);
-+
-+ spin_lock_irqsave(&smp_dma_cache_lock, flags);
-+ clear_bit(cpu, &bcache_bitmap);
-+ smp_dma_cache_data[cpu].type = 0;
-+ smp_dma_cache_data[cpu].start = 0;
-+ smp_dma_cache_data[cpu].end = 0;
-+ smp_dma_cache_data[cpu].unfinished = 0;
-+out:
-+ spin_unlock_irqrestore(&smp_dma_cache_lock, flags);
-+}
-+
-+/*
-+ * Execute the DMA cache operations on all online CPUs. This function
-+ * can be called with interrupts disabled or from interrupt context.
-+ */
-+static void __smp_dma_cache_op(int type, const void *start, const void *end)
-+{
-+ cpumask_t callmap = cpu_online_map;
-+ unsigned int cpu = get_cpu();
-+ unsigned long flags;
-+ unsigned long cpu_check;
-+ cpu_clear(cpu, callmap);
-+ cpu_check = *cpus_addr(callmap) >> 1;
-+
-+ while (test_bit(cpu, &bcache_bitmap))
-+ ipi_dma_cache_op(cpu);
-+
-+ while (test_bit(cpu_check, &bcache_bitmap))
-+ barrier();
-+
-+ spin_lock_irqsave(&smp_dma_cache_lock, flags);
-+ smp_dma_cache_data[cpu_check].type = type;
-+ smp_dma_cache_data[cpu_check].start = start;
-+ smp_dma_cache_data[cpu_check].end = end;
-+ smp_dma_cache_data[cpu_check].unfinished = 1;
-+ set_bit(cpu_check, &bcache_bitmap);
-+ send_ipi_message_cache(&callmap);
-+ spin_unlock_irqrestore(&smp_dma_cache_lock, flags);
-+
-+ /* run the local operation in parallel with the other CPUs */
-+ local_dma_cache_op(type, start, end);
-+ put_cpu();
-+}
-+
-+#define DMA_MAX_RANGE SZ_4K
-+
-+/*
-+ * Split the cache range in smaller pieces if interrupts are enabled
-+ * to reduce the latency caused by disabling the interrupts during the
-+ * broadcast.
-+ */
-+void smp_dma_cache_op(int type, const void *start, const void *end)
-+{
-+ __smp_dma_cache_op(type, start, end);
-+}
-+#endif
---- a/arch/arm/kernel/smp_twd.c
-+++ b/arch/arm/kernel/smp_twd.c
-@@ -41,7 +41,8 @@
- /* set up by the platform code */
- void __iomem *twd_base;
-
--static unsigned long twd_timer_rate;
-+unsigned long twd_timer_rate;
-+EXPORT_SYMBOL(twd_timer_rate);
-
- static void twd_set_mode(enum clock_event_mode mode,
- struct clock_event_device *clk)
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -0,0 +1,629 @@
-+/*
-+ * linux/arch/arm/mach-cns3xxx/cns3xxx.c
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (C) 1999 - 2003 ARM Limited
-+ * Copyright (C) 2000 Deep Blue Solutions Ltd
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/sysdev.h>
-+#include <linux/interrupt.h>
-+#include <linux/amba/bus.h>
-+#include <linux/delay.h>
-+#include <linux/clocksource.h>
-+#include <linux/clockchips.h>
-+#include <linux/io.h>
-+#include <linux/ata_platform.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/clkdev.h>
-+#include <asm/system.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/hardware/arm_timer.h>
-+#include <asm/hardware/cache-l2cc.h>
-+#include <asm/smp_twd.h>
-+#include <asm/gpio.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+#include <asm/mach/irq.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/time.h>
-+
-+#include <asm/hardware/gic.h>
-+
-+#include <mach/platform.h>
-+#include <mach/irqs.h>
-+#include <mach/pm.h>
-+#include <asm/dma.h>
-+#include <mach/dmac.h>
-+
-+#include "core.h"
-+#include "rdma.h"
-+
-+static struct map_desc cns3xxx_io_desc[] __initdata = {
-+ {
-+ .virtual = CNS3XXX_TC11MP_TWD_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_I2S_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_I2S_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_TIMER1_2_3_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_TIMER1_2_3_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_TC11MP_L220_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_TC11MP_L220_BASE),
-+ .length = SZ_8K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_SWITCH_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_SWITCH_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_SSP_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_SSP_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_DMC_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_DMC_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_SMC_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_SMC_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_GPIOA_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_GPIOA_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_GPIOB_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_GPIOB_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_RTC_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_RTC_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_MISC_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_MISC_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PM_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PM_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_UART0_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_UART0_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_UART1_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_UART1_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_UART2_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_UART2_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_UART3_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_UART3_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_DMAC_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_DMAC_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_CRYPTO_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_CRYPTO_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_HCIE_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_HCIE_BASE),
-+ .length = SZ_32K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_RAID_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_RAID_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_AXI_IXC_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_AXI_IXC_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_CLCD_BASE_VIRT,
-+ .pfn = __phys_to_pfn( CNS3XXX_CLCD_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_USBOTG_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_USBOTG_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_USB_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_USB_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_SATA2_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_SATA2_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_CAMERA_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_CAMERA_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_I2S_TDM_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_I2S_TDM_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_2DG_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_2DG_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_USB_OHCI_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_USB_OHCI_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE0_MEM_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE0_MEM_BASE),
-+ .length = SZ_16M, // 176MB
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE),
-+ .length = SZ_16M,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE0_CFG0_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE),
-+ .length = SZ_16M,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE0_CFG1_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE),
-+ .length = SZ_16M,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE0_MSG_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE0_MSG_BASE),
-+ .length = SZ_16M,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE0_IO_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE0_IO_BASE),
-+ .length = SZ_16M,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE1_MEM_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE1_MEM_BASE),
-+ .length = SZ_16M,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE1_HOST_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE),
-+ .length = SZ_16M,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE1_CFG0_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE),
-+ .length = SZ_16M,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE1_CFG1_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
-+ .length = SZ_16M,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE1_MSG_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE1_MSG_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE1_IO_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE1_IO_BASE),
-+ .length = SZ_16M,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_L2C_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_L2C_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PPE_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PPE_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_EMBEDDED_SRAM_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_EMBEDDED_SRAM_BASE),
-+ .length = SZ_8K,
-+ .type = MT_DEVICE,
-+ },
-+};
-+
-+void __init cns3xxx_map_io(void)
-+{
-+ iotable_init(cns3xxx_io_desc, ARRAY_SIZE(cns3xxx_io_desc));
-+}
-+
-+/* used by entry-macro.S */
-+void __iomem *gic_cpu_base_addr;
-+
-+void __init cns3xxx_init_irq(void)
-+{
-+ /* ARM11 MPCore test chip GIC */
-+ gic_cpu_base_addr = (void __iomem *) CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT;
-+ gic_dist_init(0, (void __iomem *) CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT, 29);
-+ gic_cpu_init(0, gic_cpu_base_addr);
-+ set_interrupt_pri(1, 0); // Set cache broadcast priority to the highest priority
-+}
-+
-+int gpio_to_irq(int gpio)
-+{
-+ if (gpio > 63)
-+ return -EINVAL;
-+
-+ if (gpio < 32)
-+ return IRQ_CNS3XXX_GPIOA;
-+ else
-+ return IRQ_CNS3XXX_GPIOB;
-+}
-+
-+int irq2gpio(int irq)
-+{
-+ if (irq == IRQ_CNS3XXX_GPIOA)
-+ return 0;
-+ else if (irq == IRQ_CNS3XXX_GPIOB)
-+ return 32;
-+ else
-+ return -EINVAL;
-+}
-+
-+static inline void gpio_line_config(u8 line, u32 direction)
-+{
-+ u32 reg;
-+ if (direction) {
-+ if (line < 32) {
-+ reg = __raw_readl(CNS3XXX_GPIOA_BASE_VIRT + CNS3XXX_GPIO_DIR);
-+ reg |= (1 << line);
-+ __raw_writel(reg, CNS3XXX_GPIOA_BASE_VIRT + CNS3XXX_GPIO_DIR);
-+ } else {
-+ reg = __raw_readl(CNS3XXX_GPIOB_BASE_VIRT + CNS3XXX_GPIO_DIR);
-+ reg |= (1 << (line - 32));
-+ __raw_writel(reg, CNS3XXX_GPIOB_BASE_VIRT + CNS3XXX_GPIO_DIR);
-+ }
-+ } else {
-+ if (line < 32) {
-+ reg = __raw_readl(CNS3XXX_GPIOA_BASE_VIRT + CNS3XXX_GPIO_DIR);
-+ reg &= ~(1 << line);
-+ __raw_writel(reg, CNS3XXX_GPIOA_BASE_VIRT + CNS3XXX_GPIO_DIR);
-+ } else {
-+ reg = __raw_readl(CNS3XXX_GPIOB_BASE_VIRT + CNS3XXX_GPIO_DIR);
-+ reg &= ~(1 << (line - 32));
-+ __raw_writel(reg, CNS3XXX_GPIOB_BASE_VIRT + CNS3XXX_GPIO_DIR);
-+ }
-+ }
-+}
-+
-+static int cns3xxx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-+{
-+ gpio_line_config(gpio, CNS3XXX_GPIO_IN);
-+ return 0;
-+}
-+
-+static int cns3xxx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
-+{
-+ gpio_line_set(gpio, level);
-+ gpio_line_config(gpio, CNS3XXX_GPIO_OUT);
-+ return 0;
-+}
-+
-+static int cns3xxx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
-+{
-+ return gpio_get_value(gpio);
-+}
-+
-+static void cns3xxx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
-+{
-+ gpio_set_value(gpio, value);
-+}
-+
-+static struct gpio_chip cns3xxx_gpio_chip = {
-+ .label = "CNS3XXX_GPIO_CHIP",
-+ .direction_input = cns3xxx_gpio_direction_input,
-+ .direction_output = cns3xxx_gpio_direction_output,
-+ .get = cns3xxx_gpio_get_value,
-+ .set = cns3xxx_gpio_set_value,
-+ .base = 0,
-+ .ngpio = 64,
-+};
-+
-+/* Watchdog */
-+static struct resource cns3xxx_watchdog_resources[] = {
-+ {
-+ .start = CNS3XXX_TC11MP_TWD_BASE,
-+ .end = CNS3XXX_TC11MP_TWD_BASE + SZ_4K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },{
-+ .start = IRQ_LOCALWDOG,
-+ .end = IRQ_LOCALWDOG,
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct platform_device cns3xxx_watchdog_device = {
-+ .name = "cns3xxx-wdt",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(cns3xxx_watchdog_resources),
-+ .resource = cns3xxx_watchdog_resources,
-+};
-+
-+static struct resource cns3xxx_gpio_resources[] = {
-+ {
-+ .name = "gpio",
-+ .start = 0xFFFFFFFF,
-+ .end = 0xFFFFFFFF,
-+ .flags = 0,
-+ },
-+};
-+
-+static struct platform_device cns3xxx_gpio = {
-+ .name = "GPIODEV",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(cns3xxx_gpio_resources),
-+ .resource = cns3xxx_gpio_resources,
-+};
-+
-+void __init cns3xxx_sys_init(void)
-+{
-+ l2cc_init((void __iomem *) CNS3XXX_L2C_BASE_VIRT);
-+
-+ dmac_init();
-+ cns_rdma_init();
-+
-+ platform_device_register(&cns3xxx_gpio);
-+ platform_device_register(&cns3xxx_watchdog_device);
-+ gpiochip_add(&cns3xxx_gpio_chip);
-+}
-+
-+void __iomem *timer1_va_base;
-+
-+static void timer_set_mode(enum clock_event_mode mode,
-+ struct clock_event_device *clk)
-+{
-+ unsigned long ctrl = readl(timer1_va_base + TIMER1_2_CONTROL_OFFSET);
-+ int reload;
-+ int pclk = (cns3xxx_cpu_clock() >> 3);
-+
-+ switch(mode) {
-+ case CLOCK_EVT_MODE_PERIODIC:
-+ /* pclk is cpu clock/8 */
-+ reload=pclk*1000000/HZ;
-+ writel(reload, timer1_va_base + TIMER1_AUTO_RELOAD_OFFSET);
-+ ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
-+ break;
-+ case CLOCK_EVT_MODE_ONESHOT:
-+ /* period set, and timer enabled in 'next_event' hook */
-+ writel(0, timer1_va_base + TIMER1_AUTO_RELOAD_OFFSET);
-+ ctrl |= (1 << 2) | (1 << 9);
-+ break;
-+ case CLOCK_EVT_MODE_UNUSED:
-+ case CLOCK_EVT_MODE_SHUTDOWN:
-+ default:
-+ ctrl = 0;
-+ }
-+
-+ writel(ctrl, timer1_va_base + TIMER1_2_CONTROL_OFFSET);
-+}
-+
-+static int timer_set_next_event(unsigned long evt,
-+ struct clock_event_device *unused)
-+{
-+ unsigned long ctrl = readl(timer1_va_base + TIMER1_2_CONTROL_OFFSET);
-+
-+ writel(evt, timer1_va_base + TIMER1_COUNTER_OFFSET);
-+ writel(ctrl | (1 << 0), timer1_va_base + TIMER1_2_CONTROL_OFFSET);
-+
-+ return 0;
-+}
-+
-+static struct clock_event_device timer1_clockevent = {
-+ .name = "timer1",
-+ .shift = 32,
-+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-+ .set_mode = timer_set_mode,
-+ .set_next_event = timer_set_next_event,
-+ .rating = 300,
-+ .cpumask = cpu_all_mask,
-+};
-+
-+static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
-+{
-+ timer1_clockevent.irq = timer_irq;
-+ timer1_clockevent.mult =
-+ div_sc( (cns3xxx_cpu_clock() >> 3)*1000000, NSEC_PER_SEC, timer1_clockevent.shift);
-+ timer1_clockevent.max_delta_ns =
-+ clockevent_delta2ns(0xffffffff, &timer1_clockevent);
-+ timer1_clockevent.min_delta_ns =
-+ clockevent_delta2ns(0xf, &timer1_clockevent);
-+
-+ clockevents_register_device(&timer1_clockevent);
-+}
-+
-+/*
-+ * IRQ handler for the timer
-+ */
-+static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
-+{
-+ u32 val;
-+ struct clock_event_device *evt = &timer1_clockevent;
-+
-+ /* Clear the interrupt */
-+ val = readl(timer1_va_base + TIMER1_2_INTERRUPT_STATUS_OFFSET);
-+ writel(val & ~(1 << 2), timer1_va_base + TIMER1_2_INTERRUPT_STATUS_OFFSET);
-+
-+ evt->event_handler(evt);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction cns3xxx_timer_irq = {
-+ .name = "timer",
-+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-+ .handler = cns3xxx_timer_interrupt,
-+};
-+
-+static cycle_t cns3xxx_get_cycles(struct clocksource *cs)
-+{
-+ u64 val;
-+
-+ val = readl(timer1_va_base + TIMER_FREERUN_CONTROL_OFFSET);
-+ val &= 0xffff;
-+
-+ return ((val << 32) | readl(timer1_va_base + TIMER_FREERUN_OFFSET));
-+}
-+
-+static struct clocksource clocksource_cns3xxx = {
-+ .name = "freerun",
-+ .rating = 200,
-+ .read = cns3xxx_get_cycles,
-+ .mask = CLOCKSOURCE_MASK(48),
-+ .shift = 16,
-+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-+
-+static void __init cns3xxx_clocksource_init(void)
-+{
-+ /* Reset the FreeRunning counter */
-+ writel((1 << 16), timer1_va_base + TIMER_FREERUN_CONTROL_OFFSET);
-+
-+ clocksource_cns3xxx.mult =
-+ clocksource_khz2mult(100, clocksource_cns3xxx.shift);
-+ clocksource_register(&clocksource_cns3xxx);
-+}
-+
-+/*
-+ * Set up the clock source and clock events devices
-+ */
-+void __init __cns3xxx_timer_init(unsigned int timer_irq)
-+{
-+ unsigned long val, irq_mask;
-+
-+ /*
-+ * Initialise to a known state (all timers off)
-+ */
-+ writel(0, timer1_va_base + TIMER1_2_CONTROL_OFFSET); /* disable timer1 and timer2 */
-+ writel(0, timer1_va_base + TIMER_FREERUN_CONTROL_OFFSET); /* stop free running timer3 */
-+ writel(0, timer1_va_base + TIMER1_MATCH_V1_OFFSET);
-+ writel(0, timer1_va_base + TIMER1_MATCH_V2_OFFSET);
-+
-+ val = (cns3xxx_cpu_clock() >> 3) * 1000000 / HZ;
-+ writel(val, timer1_va_base + TIMER1_COUNTER_OFFSET);
-+
-+ /* mask irq, non-mask timer1 overflow */
-+ irq_mask = readl(timer1_va_base + TIMER1_2_INTERRUPT_MASK_OFFSET);
-+ irq_mask &= ~(1 << 2);
-+ irq_mask |= 0x03;
-+ writel(irq_mask, timer1_va_base + TIMER1_2_INTERRUPT_MASK_OFFSET);
-+ /* down counter */
-+ val = readl(timer1_va_base + TIMER1_2_CONTROL_OFFSET);
-+ val |= (1 << 9);
-+ writel(val, timer1_va_base + TIMER1_2_CONTROL_OFFSET);
-+
-+ /*
-+ * Make irqs happen for the system timer
-+ */
-+ setup_irq(timer_irq, &cns3xxx_timer_irq);
-+
-+ cns3xxx_clocksource_init();
-+ cns3xxx_clockevents_init(timer_irq);
-+}
-+
-+void __init cns3xxx_timer_init(void)
-+{
-+ timer1_va_base = (void __iomem *) CNS3XXX_TIMER1_2_3_BASE_VIRT;
-+ twd_base = (void __iomem *) CNS3XXX_TC11MP_TWD_BASE_VIRT;
-+ __cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
-+}
-+
-+struct sys_timer cns3xxx_timer = {
-+ .init = cns3xxx_timer_init,
-+};
-+
-+
-+void cns3xxx_power_off(void)
-+{
-+ __u32 clkctrl;
-+
-+ printk(KERN_INFO "powering system down...\n");
-+
-+ clkctrl = readl(CNS3XXX_PM_BASE_VIRT + PM_SYS_CLK_CTRL_OFFSET);
-+ clkctrl &= 0xfffff1ff;
-+ clkctrl |= (0x5 << 9); /* Hibernate */
-+ writel(clkctrl, CNS3XXX_PM_BASE_VIRT + PM_SYS_CLK_CTRL_OFFSET);
-+}
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/core.h
-@@ -0,0 +1,34 @@
-+/*
-+ * linux/arch/arm/mach-cns3xxx/core.h
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (C) 2004 ARM Limited
-+ * Copyright (C) 2000 Deep Blue Solutions Ltd
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#ifndef __ASM_ARCH_CNS3XXX_H
-+#define __ASM_ARCH_CNS3XXX_H
-+
-+void __init cns3xxx_map_io(void);
-+void cns3xxx_power_off(void);
-+void __init cns3xxx_init_irq(void);
-+
-+extern struct sys_timer cns3xxx_timer;
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/dmac.c
-@@ -0,0 +1,1464 @@
-+/*******************************************************************************
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ *
-+ ******************************************************************************/
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/spinlock.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/dma-mapping.h>
-+#include <asm/memory.h>
-+#include <asm/dma.h>
-+#include <mach/hardware.h>
-+#include <mach/pm.h>
-+
-+
-+#include <mach/dmac.h>
-+
-+//#define DEBUG_GDMA
-+
-+#define DMAC_MEM_MAP_VALUE(reg_offset) (*((uint32_t volatile *)(CNS3XXX_DMAC_BASE_VIRT + reg_offset)))
-+
-+#define DMAC_INTEN DMAC_MEM_MAP_VALUE(0x020)
-+#define DMAC_INTSTATUS DMAC_MEM_MAP_VALUE(0x028)
-+#define DMAC_INTCLR DMAC_MEM_MAP_VALUE(0x02C)
-+
-+/* DMAC Debug registers */
-+#define DMAC_DBGSTATUS DMAC_MEM_MAP_VALUE(0xD00) /* Debug Status Register */
-+#define DMAC_DBGCMD DMAC_MEM_MAP_VALUE(0xD04) /* Debug Command Register */
-+#define DMAC_DBGINST0 DMAC_MEM_MAP_VALUE(0xD08) /* Debug Instrucion-0 Register */
-+#define DMAC_DBGINST1 DMAC_MEM_MAP_VALUE(0xD0C) /* Debug Instrucion-1 Register */
-+
-+#define CHANNEL_AND_MANAGER 0x1ff
-+#define CHANNEL_ONLY 0xff
-+#define MANAGER_ONLY 0x100
-+
-+#define MAX_MICROCODE_SIZE 2048
-+
-+#if 0
-+#define ERROR_INTR 45
-+#define DMAC_IRQNO_BASE 46
-+#else
-+#define ERROR_INTR 68
-+#define DMAC_IRQNO_BASE 69
-+#endif
-+
-+#define MAX_INTR_EVENTS 32
-+
-+#define MIN_EVENT_NUM 8 //2
-+
-+/* Debug Status Register */
-+#define DMAC_DBG_BUSY_BIT (1<<0)
-+#define DMAC_DBG_INSTR_0_SHIFT 16
-+#define DMAC_DBG_INSTR_2_SHIFT 0
-+#define DMAC_DBG_THREAD_BIT (1<<0)
-+#define DMAC_DBG_CH_NUM_SHIFT 8
-+#define DMAC_DBG_CH_NUM_BIT_MASK 0x7
-+#define DMAC_CHMGR 8
-+
-+spinlock_t dma_mgr_lock;
-+
-+typedef enum {
-+// DMAC_INSTR_DMAADDH = 0, /* Add Halfword */ /*** No implement ***/
-+ DMAC_INSTR_DMAEND = 0, /* End */
-+ DMAC_INSTR_DMAFLUSHP, /* Flash and notify Peripheral */
-+ DMAC_INSTR_DMAGO, /* Go */
-+ DMAC_INSTR_DMALD, /* Load */
-+ DMAC_INSTR_DMALDP, /* Load aPeripheral */
-+ DMAC_INSTR_DMALP, /* Loop */
-+ DMAC_INSTR_DMALPEND, /* Loop End */
-+// DMAC_INSTR_DMALPFE, /* Loop Forever */
-+ DMAC_INSTR_DMAKILL, /* kill */
-+ DMAC_INSTR_DMAMOV, /* Move */
-+ DMAC_INSTR_DMANOP, /* No operation */
-+// DMAC_INSTR_DMARMB, /* Read Memory Barrier */
-+ DMAC_INSTR_DMASEV, /* Send Event */
-+ DMAC_INSTR_DMAST, /* Store */
-+ DMAC_INSTR_DMASTP, /* Store and notify Peripheral */
-+ DMAC_INSTR_DMASTZ, /* Store Zero */
-+ DMAC_INSTR_DMAWFE, /* Wait For Event */
-+ DMAC_INSTR_DMAWFP, /* Wait For Peripheral */
-+ DMAC_INSTR_DMAWMB /* Wait For Barrier */
-+} dmac_instr_t;
-+
-+typedef struct {
-+ const char *enc_buf;
-+ int enc_buf_len;
-+ int chan_or_mgr; /* 0xff for DMA manager and DMA channel,
-+ 0x7f for DMA channel,
-+ 0x80 for DMA manager */
-+} dmac_instr_encode_t;
-+
-+typedef struct {
-+ uint32_t sa:1; /* source address increment: 0 - FIXED / 1 - INCR */
-+ uint32_t ss:3; /* source burst size in bytes: mapping value TBD with designer */
-+ uint32_t sb:4; /* source burst length */
-+ uint32_t sp:3; /* source protection */
-+ uint32_t sc:3; /* source cache */
-+ uint32_t da:1; /* destination address increment: 0 - FIXED / 1 - INCR */
-+ uint32_t ds:3; /* destination burst size in bytes: mapping value TBD with designer */
-+ uint32_t db:4; /* destination burst length */
-+ uint32_t dp:3; /* destination protection */
-+ uint32_t dc:3; /* destination cache */
-+ uint32_t es:3; /* endian swap size, in bits */
-+ uint32_t padding:1;
-+} dmac_ch_ctrl_t;
-+
-+typedef struct {
-+ union {
-+ dmac_ch_ctrl_t ccr;
-+ uint32_t val;
-+ } i;
-+} dmac_cmd_imm32_t;
-+
-+typedef struct {
-+ uint16_t bs:1; /* burst/single bit */
-+ uint16_t x:1; /* x bit */
-+ uint16_t ns:1; /* not secure bit */
-+ uint16_t lc:1; /* loop counter bit */
-+ uint16_t p:1; /* p bit */
-+ uint16_t nf:1; /* no-finite bit */
-+ uint16_t i:1; /* invalid bit */
-+ uint16_t padding:9;
-+} dmac_cmd_bits_t;
-+
-+typedef struct {
-+ uint8_t periph; /* peripheral ID */
-+ uint8_t cn; /* Channel Number */
-+ uint8_t iter; /* iteration count */
-+ uint8_t backwards_jump; /* backwards jump length */
-+ uint8_t rd; /* destination register, <SAR=b000, CCR=b001, DAR=b010> */
-+ uint8_t event_num; /* event number */
-+
-+ union {
-+ dmac_cmd_bits_t b;
-+ uint16_t val;
-+ } bits;
-+
-+ dmac_cmd_imm32_t imm32; /* immediate 32bit value */
-+} dmac_instr_param_t;
-+
-+typedef struct {
-+ int in_use; /* Channel in use or not */
-+ int channel; /* Channel number */
-+ int microcode_size; /* Microcode size */
-+ uint8_t *microcode; /* TODO */
-+ dma_addr_t microcode_dma;
-+ int (*intr_handler) (void *);
-+ void *handler_args;
-+ int notifications_used; /* 32 bits for every interrupt/event */
-+} dmac_channel_t;
-+
-+/* TODO: Not protected as of now */
-+dmac_channel_t *dmac_channels[MAX_DMA_CHANNELS];
-+
-+int dmac_events[MAX_INTR_EVENTS];
-+
-+static int dmac_create_instr(int chan, dmac_instr_t instr,
-+ dmac_instr_param_t * param);
-+static int dmac_exec_ucode(int ucode_channel, int ch);
-+void pl330_dump_regs(void);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAEND
-+ * Description:
-+ * | 7 6 5 4 | 3 2 1 0 |
-+ * 0 0 0 0 0 0 0 0
-+ * Example:
-+ * DMAEND
-+ * 00
-+ ******************************************************************************/
-+const char dmac_code_DMAEND[] = { 0x00 };
-+
-+int DMAC_DMAEND(int ch_num)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMAEND, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMAEND);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAFLUSHP
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * <periph[4:0] > 0 0 0 0 0 1 1 0 1 0 1
-+ * Example:
-+ * DMAFLUSHP P0
-+ * 35 00
-+ ******************************************************************************/
-+const char dmac_code_DMAFLUSHP[] = { 0x35, 0x00 };
-+
-+int DMAC_DMAFLUSHP(int ch_num, int periph)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ param.periph = periph;
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMAFLUSHP, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMAFLUSHP);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAGO
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * 0 0 0 0 0 <cn[2:0]> 1 0 1 0 0 0 ns 0
-+ *
-+ * | 47 16 |
-+ * < imm[31:0] >
-+ * Example:
-+ * DMAGO C0, 0x40000000
-+ * A0 00 00 00 00 40
-+ ******************************************************************************/
-+const char dmac_code_DMAGO[] = { 0xA0, 0x00, 0x00, 0x00, 0x00, 0x40 };
-+
-+int DMAC_DMAGO(int ch_num)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ dmac_channel_t *dma_ch = dmac_channels[ch_num];
-+
-+ if(!dma_ch->in_use) {
-+ printk("DMAC_DMAGO an unused channel\n");
-+ return -1;
-+ }
-+
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ param.bits.b.ns = 1;
-+ param.cn = ch_num;
-+ param.imm32.i.val = dma_ch->microcode_dma;
-+#ifdef DEBUG_GDMA
-+ printk("%s:%d: microcode Physical Address *(%x)==[%x]\n", __FUNCTION__,
-+ __LINE__, param.imm32.i.val,
-+ *((uint32_t *) phys_to_virt(dma_ch->microcode_dma)));
-+#endif
-+ instr_len = dmac_create_instr(DMAC_CHMGR, DMAC_INSTR_DMAGO, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ dmac_exec_ucode(DMAC_CHMGR, DMAC_CHMGR); // DMAC_CHMGR);
-+ if (dmac_channels[DMAC_CHMGR])
-+ dmac_channels[DMAC_CHMGR]->microcode_size = 0;
-+ else
-+ printk("BUG HERE !! DEBUG .. \n");
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMAGO);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMALD
-+ * Description:
-+ * | 7 6 5 4 | 3 2 1 0 |
-+ * 0 0 0 0 0 1 bs x
-+ * Example:
-+ * DMALD
-+ * 04
-+ ******************************************************************************/
-+const char dmac_code_DMALD[] = { 0x04 };
-+
-+int DMAC_DMALD(int ch_num)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ /* param.bits.b.x = param.bits.b.bs = 0; */
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMALD, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMALD);
-+
-+int DMAC_DMALDB(int ch_num)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ /* param.bits.b.x = param.bits.b.bs = 0; */
-+ param.bits.b.x = 1;
-+ param.bits.b.bs = 1;
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMALD, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMALDB);
-+
-+int DMAC_DMALDS(int ch_num)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ /* param.bits.b.x = param.bits.b.bs = 0; */
-+ param.bits.b.x = 1;
-+ param.bits.b.bs = 0;
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMALD, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMALDS);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMALP
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * < iter[7:0] > 0 0 1 0 0 0 lc 0
-+ * Example:
-+ * DMALP 8
-+ * 20 07
-+ ******************************************************************************/
-+const char dmac_code_DMALP[] = { 0x20, 0x07 };
-+
-+int DMAC_DMALP(int ch_num, int loop_reg_idx, int iter)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ param.bits.b.lc = loop_reg_idx;
-+ param.iter = (uint8_t) (iter - 1);
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMALP, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMALP);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMALPEND
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * < backwards_jump[7:0] > 0 0 1 nf 1 lc bs x
-+ * Example:
-+ * DMALPEND
-+ * 38 04
-+ ******************************************************************************/
-+const char dmac_code_DMALPEND[] = { 0x38, 0x04 };
-+
-+int DMAC_DMALPEND(int ch_num, int loop_reg_idx, int jump, int lpfe)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ /* param.bits.b.x = param.bits.b.bs = 0; */
-+ param.bits.b.lc = loop_reg_idx;
-+ param.bits.b.nf = lpfe;
-+ param.backwards_jump = jump;
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMALPEND, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMALPEND);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAMOV
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * 0 0 0 0 0 <rd[2:0]> 1 0 1 1 1 1 0 0
-+ *
-+ * | 47 16 |
-+ * < imm[31:0] >
-+ *
-+ * # CCR Description
-+ * # [30:28] Endian swap size
-+ * # [27:25] AWCACHE[3,1:0] value
-+ * # [24:22] AWPROT value
-+ * # [21:18] AWLEN value
-+ * # [17:15] AWSIZE value
-+ * # [14] AWBURST[0] value
-+ * 0 - FIXED / 1 - INCR
-+ * # [13:11] ARCACHE[2:0] value
-+ * # [10:8] ARPROT value
-+ * # [7:4] ARLEN value
-+ * # [3:1] ARSIZE value
-+ * # [0] ARBURST[0] value
-+ * 0 - FIXED / 1 - INCR
-+ * Example:
-+ * DMAMOV CCR, SB1 SS32 DB1 DS32
-+ * BC 01 05 40 01 00
-+ ******************************************************************************/
-+const char dmac_code_DMAMOV[] = { 0xBC, 0x01, 0x05, 0x40, 0x01, 0x00 };
-+
-+/* ccr_sar_dar: 0 for SAR, 1, for CCR, 2 for DAR */
-+//typedef enum { SAR = 0, CCR = 1, DAR = 2} dmamov_arg_t;
-+int DMAC_DMAMOV(int ch_num, dmamov_arg_t ccr_sar_dar, uint32_t value)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ param.rd = ccr_sar_dar;
-+ param.imm32.i.val = value;
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMAMOV, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMAMOV);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAST
-+ * Description:
-+ * | 7 6 5 4 | 3 2 1 0 |
-+ * 0 0 0 0 1 0 bs x
-+ * Example:
-+ * DMAST
-+ * 08
-+ ******************************************************************************/
-+const char dmac_code_DMAST[] = { 0x08 };
-+
-+int DMAC_DMAST(int ch_num)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ /* param.bits.b.x = param.bits.b.bs = 0; */
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMAST, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMAST);
-+
-+const char dmac_code_DMAWMB[] = { 0x13 };
-+
-+int DMAC_DMAWMB(int ch_num)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMAWMB, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed\n");
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMAWMB);
-+
-+const char dmac_code_DMANOP[] = { 0x18 };
-+
-+int DMAC_DMANOP(int ch_num)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMANOP, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed\n");
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMANOP);
-+
-+int DMAC_DMASTB(int ch_num)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ param.bits.b.x = 1;
-+ param.bits.b.bs = 1;
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMAST, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMASTB);
-+
-+int DMAC_DMASTS(int ch_num)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ param.bits.b.x = 1;
-+ param.bits.b.bs = 0;
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMAST, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMASTS);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMASTZ
-+ * Description:
-+ * | 7 6 5 4 | 3 2 1 0 |
-+ * 0 0 0 0 1 1 0 0
-+ * Example:
-+ * DMASTZ
-+ * 08
-+ ******************************************************************************/
-+const char dmac_code_DMASTZ[] = { 0x0C };
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAWFE
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * <event_num[4:0]> 0 i 0 0 0 1 1 0 1 1 0
-+ * Example:
-+ * DMAWFE E0
-+ * 36 00
-+ ******************************************************************************/
-+const char dmac_code_DMAWFE[] = { 0x36, 0x00 };
-+
-+int DMAC_WFE(int chan, int event_num)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ /* param.bits.b.x = param.bits.b.bs = 0; */
-+//#warning "to set bits"
-+ param.event_num = event_num;
-+ instr_len = dmac_create_instr(chan, DMAC_INSTR_DMAWFE, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_WFE);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAWFP
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * < periph[4:0] > 0 0 0 0 0 1 1 0 0 bs p
-+ * Example:
-+ * DMAWFP P0, periph
-+ * 31 00
-+ ******************************************************************************/
-+const char dmac_code_DMAWFP[] = { 0x31, 0x00 };
-+
-+int DMAC_DMAWFP(int ch_num, int periph_id, dmawfp_burst_type s)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ if (s == SINGLE) {
-+ param.bits.b.bs = 0;
-+ param.bits.b.p = 0;
-+ }
-+ if (s == BURST) {
-+ param.bits.b.bs = 1;
-+ param.bits.b.p = 0;
-+ }
-+ if (s == PERIPHERAL) {
-+ param.bits.b.bs = 0;
-+ param.bits.b.p = 1;
-+ }
-+ param.periph = periph_id;
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMAWFP, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMAWFP);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAKILL
-+ * Description:
-+ * | 7 6 5 4 | 3 2 1 0 |
-+ * 0 0 0 0 0 0 0 1
-+ * Example:
-+ * DMAKILL
-+ * 01
-+ ******************************************************************************/
-+const char dmac_code_DMAKILL[] = { 0x01 };
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMASEV
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * <event_num[4:0]> 0 i 0 0 0 1 1 0 1 0 0
-+ * Example:
-+ * DMASEV E0
-+ * 34 00
-+ ******************************************************************************/
-+const char dmac_code_DMASEV[] = { 0x34, 0x00 };
-+
-+int DMAC_DMASEV(int ch_num, int event_num)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ dmac_channel_t *dma_ch = dmac_channels[ch_num];
-+ if ((event_num >= MIN_EVENT_NUM)
-+ && !(dma_ch->notifications_used & (1 << event_num))) {
-+ printk("DMAC_DMASEV failed event number request not done\n");
-+ return -1;
-+ } else if ((event_num < MIN_EVENT_NUM) && (event_num != ch_num)) {
-+ printk
-+ ("%s:%d - Presently, we have this hard restriction that each channel can signal irq event == channel_no\n",
-+ __FUNCTION__, __LINE__);
-+ return -1;
-+ }
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ param.event_num = event_num;
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMASEV, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMASEV);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMALDP<S|B>
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * < periph[4:0] > 0 0 0 0 0 1 0 0 1 bs 1
-+ * Example:
-+ * DMALDPS P0
-+ * 25 00
-+ ******************************************************************************/
-+const char dmac_code_DMALDP[] = { 0x25, 0x00 };
-+
-+int DMAC_DMALDP(int ch_num, int periph_id, int burst)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ /* param.bits.b.x = param.bits.b.bs = 0; */
-+ param.periph = periph_id;
-+ param.bits.b.bs = burst;
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMALDP, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMALDP);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMASTP<S|B>
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * < periph[4:0] > 0 0 0 0 0 1 0 1 0 bs 1
-+ * Example:
-+ * DMASTPS P0
-+ * 29 00
-+ ******************************************************************************/
-+const char dmac_code_DMASTP[] = { 0x29, 0x00 };
-+
-+int DMAC_DMASTP(int ch_num, int periph_id, int burst)
-+{
-+ dmac_instr_param_t param;
-+ int instr_len;
-+ memset(¶m, 0, sizeof(dmac_instr_param_t));
-+ /* param.bits.b.x = param.bits.b.bs = 0; */
-+ param.periph = periph_id;
-+ param.bits.b.bs = burst;
-+ instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMASTP, ¶m);
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(DMAC_DMASTP);
-+
-+dmac_instr_encode_t dmac_codes[] = {
-+ {dmac_code_DMAEND, sizeof(dmac_code_DMAEND), CHANNEL_AND_MANAGER}
-+ ,
-+ {dmac_code_DMAFLUSHP, sizeof(dmac_code_DMAFLUSHP), CHANNEL_ONLY}
-+ ,
-+ {dmac_code_DMAGO, sizeof(dmac_code_DMAGO), MANAGER_ONLY}
-+ ,
-+ {dmac_code_DMALD, sizeof(dmac_code_DMALD), CHANNEL_ONLY}
-+ ,
-+ {dmac_code_DMALDP, sizeof(dmac_code_DMALDP), CHANNEL_ONLY}
-+ ,
-+ {dmac_code_DMALP, sizeof(dmac_code_DMALP), CHANNEL_ONLY}
-+ ,
-+ {dmac_code_DMALPEND, sizeof(dmac_code_DMALPEND), CHANNEL_ONLY}
-+ ,
-+ {dmac_code_DMAKILL, sizeof(dmac_code_DMAKILL), CHANNEL_AND_MANAGER}
-+ ,
-+ {dmac_code_DMAMOV, sizeof(dmac_code_DMAMOV), CHANNEL_ONLY}
-+ ,
-+ {dmac_code_DMANOP, sizeof(dmac_code_DMANOP), CHANNEL_AND_MANAGER}
-+ ,
-+ {dmac_code_DMASEV, sizeof(dmac_code_DMASEV), CHANNEL_AND_MANAGER}
-+ ,
-+ {dmac_code_DMAST, sizeof(dmac_code_DMAST), CHANNEL_ONLY}
-+ ,
-+ {dmac_code_DMASTP, sizeof(dmac_code_DMASTP), CHANNEL_ONLY}
-+ ,
-+ {dmac_code_DMASTZ, sizeof(dmac_code_DMASTZ), CHANNEL_ONLY}
-+ ,
-+ {dmac_code_DMAWFE, sizeof(dmac_code_DMAWFE), CHANNEL_AND_MANAGER}
-+ ,
-+ {dmac_code_DMAWFP, sizeof(dmac_code_DMAWFP), CHANNEL_ONLY}
-+ ,
-+ {dmac_code_DMAWMB, sizeof(dmac_code_DMAWMB), CHANNEL_ONLY}
-+ ,
-+};
-+
-+static void Dmac_Cmd_Write32(uint8_t * buf, uint32_t val)
-+{
-+ buf[0] = (uint8_t) (val);
-+ buf[1] = (uint8_t) (val >> 8);
-+ buf[2] = (uint8_t) (val >> 16);
-+ buf[3] = (uint8_t) (val >> 24);
-+
-+ return;
-+}
-+
-+static int
-+dmac_create_instr(int chan, dmac_instr_t instr, dmac_instr_param_t * param)
-+{
-+ int len = 0;
-+ dmac_channel_t *dma_ch = dmac_channels[chan];
-+ uint8_t *buf = NULL;
-+#ifdef DEBUG_GDMA
-+ printk("%s:%d: In with channel no %d\n", __FUNCTION__, __LINE__, chan);
-+#endif
-+
-+ if (!((0x1 << chan) & dmac_codes[instr].chan_or_mgr)) {
-+ printk("Channel %d does not support this instruction %d\n",
-+ chan, instr);
-+ return -1;
-+ }
-+#ifdef DEBUG_GDMA
-+ if (!dma_ch)
-+ printk("%s:%d: Bug here !!\n", __FUNCTION__, __LINE__);
-+#endif
-+
-+ if (dma_ch->microcode == NULL) {
-+ buf = dma_ch->microcode =
-+ dma_alloc_coherent(NULL, MAX_MICROCODE_SIZE,
-+ &dma_ch->microcode_dma, GFP_KERNEL);
-+ printk
-+ ("First time microcode alloc for channel %d done @phy:%x\n",
-+ chan, dma_ch->microcode_dma);
-+ dma_ch->microcode_size = 0;
-+ } else {
-+ if ((dmac_codes[instr].enc_buf_len + dma_ch->microcode_size) >
-+ MAX_MICROCODE_SIZE) {
-+ printk
-+ ("We have a buffer overflow [%d]issue here ... BUG !!\n",
-+ dma_ch->microcode_size);
-+ return -1;
-+ }
-+ buf = dma_ch->microcode + dma_ch->microcode_size;
-+ }
-+#ifdef DEBUG_GDMA
-+ printk("%s:%d: Microcode alloc for channel %d\n", __FUNCTION__,
-+ __LINE__, chan);
-+#endif
-+
-+ if (buf == NULL) {
-+ printk("%s: Unable to allocate memory for microocode space\n",
-+ __FUNCTION__);
-+ return -1;
-+ }
-+#ifdef DEBUG_GDMA
-+ printk("%s:%d: allocated microcode buffer%p [@phy: %x]\n", __FUNCTION__,
-+ __LINE__, buf, dma_ch->microcode_dma + dma_ch->microcode_size);
-+#endif
-+ /* TODO: buf_space checking */
-+ memcpy(buf, dmac_codes[instr].enc_buf, dmac_codes[instr].enc_buf_len);
-+ len += dmac_codes[instr].enc_buf_len;
-+
-+ /* TODO: Parameter checking */
-+ switch (instr) {
-+ case DMAC_INSTR_DMAEND:
-+ case DMAC_INSTR_DMASTZ:
-+ case DMAC_INSTR_DMAKILL:
-+ case DMAC_INSTR_DMAWMB:
-+ case DMAC_INSTR_DMANOP:
-+ /* no parameter needed */
-+ break;
-+
-+ case DMAC_INSTR_DMAFLUSHP:
-+ /* Fill additional parameters */
-+ buf[1] |= (param->periph) << 3; // shift to bit 11
-+ break;
-+
-+ case DMAC_INSTR_DMAGO:
-+ // Fill additional parameters
-+ if (param->bits.b.ns)
-+ buf[0] |= 0x2;
-+ else
-+ buf[0] &= ~0x2;
-+ buf[1] = param->cn & 0x7;
-+//#warning "rewrite this"
-+ Dmac_Cmd_Write32(&buf[2], param->imm32.i.val);
-+ //memcpy (&buf[2],&(param->imm32.i.val),4);
-+ break;
-+
-+ case DMAC_INSTR_DMALD:
-+ case DMAC_INSTR_DMAST:
-+ // Fill additional parameters
-+ buf[0] &= 0xFC;
-+ if (param->bits.b.x)
-+ buf[0] |= 0x1;
-+ else
-+ buf[0] &= ~0x1;
-+ if (param->bits.b.bs)
-+ buf[0] |= 0x2;
-+ else
-+ buf[0] &= ~0x2;
-+ break;
-+
-+ case DMAC_INSTR_DMALP:
-+ buf[0] &= (~0x2);
-+ if (param->bits.b.lc)
-+ buf[0] |= 0x2;
-+ buf[1] = param->iter;
-+ break;
-+
-+ case DMAC_INSTR_DMALPEND:
-+ // Fill additional parameters
-+ buf[0] = 0x28;
-+ if (param->bits.b.x)
-+ buf[0] |= 0x1;
-+ if (param->bits.b.bs)
-+ buf[0] |= 0x2;
-+ if (param->bits.b.lc)
-+ buf[0] |= 0x4;
-+ if (param->bits.b.nf)
-+ buf[0] |= 0x10;
-+ buf[1] = param->backwards_jump;
-+ break;
-+
-+ case DMAC_INSTR_DMAMOV:
-+ // Fill additional parameters
-+ buf[1] = (param->rd) & 0x7;
-+//#warning "rewrite this"
-+ Dmac_Cmd_Write32(&buf[2], param->imm32.i.val);
-+ //memcpy (&buf[2],&(param->imm32.i.val),4);
-+ break;
-+
-+ case DMAC_INSTR_DMAWFE:
-+ buf[1] = 0x0;
-+ if (param->bits.b.i)
-+ buf[1] |= 0x2;
-+ buf[1] |= (param->event_num) << 3; // shift to bit 11
-+ break;
-+
-+ case DMAC_INSTR_DMASEV:
-+ buf[1] |= (param->event_num) << 3; // shift to bit 11
-+ break;
-+
-+ case DMAC_INSTR_DMAWFP:
-+ if (param->bits.b.p)
-+ buf[0] |= 0x1;
-+ else
-+ buf[0] &= ~0x1;
-+ if (param->bits.b.bs)
-+ buf[0] |= 0x2;
-+ else
-+ buf[0] &= ~0x2;
-+ buf[1] |= (param->periph) << 3; // shift to bit 11
-+ break;
-+
-+ case DMAC_INSTR_DMALDP:
-+ case DMAC_INSTR_DMASTP:
-+ // Fill additional parameters
-+ if (param->bits.b.bs)
-+ buf[0] |= 0x2;
-+ else
-+ buf[0] &= ~0x2;
-+ buf[1] |= (param->periph) << 3; // shift to bit 11
-+ break;
-+
-+ default:
-+ printk("%s: unknown instr (%d)\r\n", __FUNCTION__, instr);
-+ break;
-+ }
-+ dma_ch->microcode_size += len;
-+#ifdef DEBUG_GDMA
-+ printk("%s:%d: out with length %d\n", __FUNCTION__, __LINE__,
-+ dma_ch->microcode_size);
-+ {
-+ int foo = 0;
-+ uint8_t *foop = dma_ch->microcode;
-+ printk("Dumping the buffer -- ");
-+ for (foo = 0; foo < dma_ch->microcode_size; foo++)
-+ printk("%x ", *(foop + foo));
-+ printk(" -- done.\n");
-+ }
-+#endif
-+ return len;
-+}
-+
-+static int dmac_exec_ucode(int ucode_channel, int ch)
-+{
-+ uint8_t i, dbg_instr_0_shift_base, dbg_instr_2_shift_base, dbg_cmd_len,
-+ *dbg_cmd_buf;
-+ uint32_t dbg1_val, dbg2_val;
-+ dmac_channel_t *dma_ch = dmac_channels[ucode_channel];
-+
-+ if (!dma_ch->microcode_size) {
-+ printk("%s: No instructions have been created\n", __FUNCTION__);
-+ return -1;
-+ }
-+
-+ dbg_cmd_buf = dma_ch->microcode;
-+ dbg_cmd_len = dma_ch->microcode_size;
-+#ifdef DEBUG_GDMA
-+ {
-+ int tmp;
-+ uint8_t *tmpp = dbg_cmd_buf;
-+ printk
-+ ("Executing the code for channel %d, with instrn len %d\n",
-+ ch, dma_ch->microcode_size);
-+ printk("Dumping microcode : ");
-+ for (tmp = 0; tmp < dbg_cmd_len; tmp++)
-+ printk("%x ", *tmpp++);
-+ printk("\n");
-+ }
-+#endif
-+
-+ spin_lock(&dma_mgr_lock);
-+
-+ /* 3. Poll the Debug Status Register */
-+ while (DMAC_DBGSTATUS & DMAC_DBG_BUSY_BIT) ;
-+
-+ /* 4. Write to the Debug Instrution-X Register */
-+ dbg1_val = 0;
-+ dbg2_val = 0;
-+
-+ dbg_instr_0_shift_base = DMAC_DBG_INSTR_0_SHIFT;
-+ dbg_instr_2_shift_base = DMAC_DBG_INSTR_2_SHIFT;
-+ for (i = 0; i < dbg_cmd_len; i++) {
-+ uint8_t tmp_val = dbg_cmd_buf[i];
-+ switch (i) {
-+ case 0:
-+ case 1:
-+ dbg1_val |= (tmp_val << dbg_instr_0_shift_base);
-+ dbg_instr_0_shift_base += 8;
-+ break;
-+ case 2:
-+ case 3:
-+ case 4:
-+ case 5:
-+ tmp_val = dbg_cmd_buf[i];
-+ dbg2_val |= (tmp_val << dbg_instr_2_shift_base);
-+ dbg_instr_2_shift_base += 8;
-+ break;
-+ default:
-+ printk("BUG here ... DEBUG\n");
-+ break;
-+ }
-+ }
-+
-+ // Fill channel field
-+ if (ch == DMAC_CHMGR) {
-+ dbg1_val &= (~DMAC_DBG_THREAD_BIT);
-+ } else {
-+ dbg1_val |= DMAC_DBG_THREAD_BIT;
-+ dbg1_val |=
-+ ((ch & DMAC_DBG_CH_NUM_BIT_MASK) << DMAC_DBG_CH_NUM_SHIFT);
-+ }
-+
-+#ifdef DEBUG_GDMA
-+ {
-+ printk("dbg1_val: %x, dbg2_val: %x\n", dbg1_val, dbg2_val);
-+ }
-+#endif
-+
-+ DMAC_DBGINST0 = dbg1_val;
-+ DMAC_DBGINST1 = dbg2_val;
-+
-+ /* 5. Writing zero to the Debug Command Register */
-+ DMAC_DBGCMD = 0x0;
-+
-+ spin_unlock(&dma_mgr_lock);
-+ return 0;
-+}
-+
-+#define MAX_SINGLE_INSTR_LEN 8 /* TODO */
-+
-+static int dmac_channel_state_init(int ch_num)
-+{
-+ int instr_len = dmac_create_instr(ch_num, DMAC_INSTR_DMAKILL, NULL);
-+
-+ if (instr_len < 0) {
-+ printk("dmac_create_instr failed \n");
-+ return -1;
-+ }
-+
-+ dmac_exec_ucode(ch_num, ch_num);
-+
-+ if (dmac_channels[ch_num])
-+ dmac_channels[ch_num]->microcode_size = 0;
-+ else
-+ printk("BUG HERE !! DEBUG .. \n");
-+
-+ return 0;
-+}
-+
-+static irqreturn_t dmac_irq_handler(int irq, void *dev_id)
-+{
-+ uint32_t irq_status = 0;
-+ uint8_t event_status = 0, channel_no = 0;
-+ dmac_channel_t *chan = NULL;
-+
-+ irq_status = DMAC_INTSTATUS; /* TODO: Get Interrupt status */
-+#ifdef DEBUG_GDMA
-+ printk("Dumping the interrupt status register %x\n", irq_status);
-+#endif
-+
-+ if (!irq_status) {
-+#ifdef DEBUG_GDMA
-+ printk("%s: Probably a DMAC Fault !!%x\n", __FUNCTION__,
-+ irq_status);
-+ pl330_dump_regs();
-+#endif
-+ return IRQ_NONE;
-+ }
-+
-+// if (irq_status >= MIN_EVENT_NUM) {
-+// printk(KERN_CRIT
-+// "Event interrupt handler..(%d) Not implemented\n",
-+// irq_status);
-+// return IRQ_NONE;
-+// }
-+
-+ event_status = irq_status & 0xff;
-+ /* Clear Interrupt */
-+ DMAC_INTCLR |= (irq_status & 0xff);
-+
-+ while (event_status) {
-+ if (event_status & 0x1) {
-+ chan = dmac_channels[channel_no];
-+ if (chan->intr_handler && chan->in_use)
-+ chan->intr_handler(chan->handler_args);
-+ }
-+ event_status >>= 1;
-+ channel_no++;
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+static void cns3xxx_dmac_hw_init(void)
-+{
-+#ifdef CONFIG_CNS3XXX_PM_API
-+ /* enable GDMA clock*/
-+ cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(GDMA));
-+ /* check clok status and power status */
-+ #if 0
-+ PM_PWR_STA_REG & (0x1 << PM_PWR_STA_REG_REG_OFFSET_GDMA)
-+ PM_CACTIVE_STA_REG & (0x1 << PM_CACTIVE_STA_REG_OFFSET_GDMA)
-+ #endif
-+ /* do software reset*/
-+ cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(GDMA));
-+#else
-+#error "CNS3XXX PM API support should be enabled in Linux kernel"
-+#endif
-+}
-+
-+/*
-+ * dmac_init
-+ */
-+int __init dmac_init(void)
-+{
-+ int i, irqno = DMAC_IRQNO_BASE;
-+
-+ printk(KERN_INFO "Initializing CNS3XXX DMA controller \n");
-+
-+ cns3xxx_dmac_hw_init();
-+
-+ memset(dmac_channels, 0, sizeof(dmac_channel_t *) * MAX_DMA_CHANNELS);
-+
-+ spin_lock_init(&dma_mgr_lock);
-+
-+ for (i = 0; i < MAX_DMA_CHANNELS; i++) {
-+ dmac_channels[i] = kmalloc(sizeof(dmac_channel_t), GFP_KERNEL);
-+
-+ if (dmac_channels[i] == NULL) {
-+ printk("Unable to allocate memory for channel %d \n",
-+ i);
-+ return -ENOMEM;
-+ }
-+
-+ memset(dmac_channels[i], 0, sizeof(dmac_channel_t));
-+ }
-+
-+ /* Moves all the DMA channels to the Stopped state */
-+ for (i = 0; i < MAX_DMA_CHANNELS; i++)
-+ dmac_channel_state_init(i);
-+
-+ for (i = 0; i < MAX_INTR_EVENTS; i++)
-+ dmac_events[i] = -1;
-+
-+ /* Clear spurious interrupts */
-+ DMAC_INTCLR = 0xffffffff;
-+ DMAC_INTEN = 0xff; //Enable 8 interrupt 0x03; /* Enabling interrupts IRQ[0], IRQ[1] */
-+
-+ /* TODO: error interrupt Right now using the same irq handler,
-+ * and reporting error inside the handler
-+ */
-+ if (request_irq(ERROR_INTR, dmac_irq_handler, 0, "DMAC-ERR", NULL)) {
-+ printk(KERN_CRIT "failed to request DMAC-ERR interrupt.\n");
-+ return -ENOENT;
-+ }
-+
-+ do {
-+ if (request_irq(irqno, dmac_irq_handler, 0, "DMAC", NULL)) {
-+ printk(KERN_CRIT "failed to request DMAC interrupt.\n");
-+ return -ENOENT;
-+ }
-+ } while (++irqno < (DMAC_IRQNO_BASE + MIN_EVENT_NUM));
-+
-+ return 0;
-+}
-+
-+/*
-+ * dmac_get_channel
-+ */
-+int dmac_get_channel(int (*handler) (void *), void *handler_args)
-+{
-+ int i;
-+
-+ for (i = 0; i < MAX_DMA_CHANNELS; i++)
-+ if (dmac_channels[i]->in_use == 0) {
-+ dmac_channel_t *dmac_ch = dmac_channels[i];
-+
-+ dmac_ch->microcode_size = 0;
-+ dmac_ch->in_use = 1;
-+ dmac_ch->intr_handler = handler;
-+ dmac_ch->handler_args = handler_args;
-+
-+ /* TODO enable interrupts for that channel */
-+// dmac_channel_state_init(i);
-+ return i;
-+ }
-+
-+ return -1;
-+}
-+
-+int dmac_get_channel_ex(int channel, int (*handler) (void *), void *handler_args)
-+{
-+ if((channel >= 0) && (channel < MAX_DMA_CHANNELS) && (dmac_channels[channel]->in_use == 0)) {
-+ dmac_channel_t *dmac_ch = dmac_channels[channel];
-+
-+ dmac_ch->microcode_size = 0;
-+ dmac_ch->in_use = 1;
-+ dmac_ch->intr_handler = handler;
-+ dmac_ch->handler_args = handler_args;
-+
-+ /* TODO enable interrupts for that channel */
-+// dmac_channel_state_init(channel);
-+ return channel;
-+ }
-+
-+ return -1;
-+}
-+
-+EXPORT_SYMBOL(dmac_get_channel);
-+EXPORT_SYMBOL(dmac_get_channel_ex);
-+
-+/*
-+ * dmac_release_channel
-+ */
-+int dmac_release_channel(int chan)
-+{
-+ dmac_channel_t *dma_ch;
-+
-+ if (chan < 0 || chan > 7)
-+ return -1;
-+
-+ dma_ch = dmac_channels[chan];
-+ if (!dma_ch->in_use)
-+ return -1;
-+
-+ dma_ch->in_use = 0;
-+ dma_ch->microcode_size = 0;
-+ dma_ch->intr_handler = 0;
-+ dma_ch->handler_args = 0;
-+
-+ /* TODO enable interrupts for that channel */
-+ dmac_channel_state_init(chan);
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(dmac_release_channel);
-+
-+/*
-+ *
-+ */
-+int dmac_get_event(int chan, int event_num)
-+{
-+ if ((event_num < MIN_EVENT_NUM) || (event_num > MAX_INTR_EVENTS)) {
-+ return -1;
-+ }
-+
-+ if (dmac_events[event_num] == -1) {
-+ dmac_channel_t *dmac_ch = dmac_channels[chan];
-+ dmac_events[event_num] = chan;
-+ dmac_ch->notifications_used |= (1 << event_num);
-+ return 0;
-+ }
-+ return -1;
-+}
-+
-+EXPORT_SYMBOL(dmac_get_event);
-+
-+/*
-+ *
-+ */
-+int dmac_release_event(int chan, int event_num)
-+{
-+ if (dmac_events[event_num] != chan)
-+ return -1;
-+
-+ dmac_events[event_num] = -1;
-+ dmac_channels[chan]->notifications_used ^= (1 << event_num);
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(dmac_release_event);
-+
-+static int get_bpb_val(int bpb)
-+{
-+ int i = bpb;
-+ int retval = -1;
-+ while (i) {
-+ retval += 0x1;
-+ i /= 2;
-+ }
-+ return retval;
-+}
-+
-+/* @src_inc - src address auto increment
-+ * @s_bpb - src bytes per burst
-+ * @s_dt - src num of data transfers
-+ * @dst_inc - dst address auto increment
-+ * @d_bpb - dst bytes per burst
-+ * @d_dt - dst data transfers
-+ * @swap - swapping bytes
-+ */
-+uint32_t dmac_create_ctrlval(int src_inc, int s_bpb, int s_dt, int dst_inc,
-+ int d_bpb, int d_dt, int swap)
-+{
-+ if (!
-+ ((s_bpb == 1) || (s_bpb == 2) || (s_bpb == 4) || (s_bpb == 8)
-+ || (s_bpb == 16)
-+ || (s_bpb == 32) || (s_bpb == 64) || (s_bpb == 128))) {
-+ printk
-+ ("INVALID s_bpb parameter ... setting default and proceeding\n");
-+ s_bpb = 4;
-+ }
-+ if (!
-+ ((d_bpb == 1) || (d_bpb == 2) || (d_bpb == 4) || (d_bpb == 8)
-+ || (d_bpb == 16)
-+ || (d_bpb == 32) || (d_bpb == 64) || (d_bpb == 128))) {
-+ printk
-+ ("INVALID d_bpb parameter ... setting default and proceeding\n");
-+ d_bpb = 4;
-+ }
-+
-+ if ((s_dt < 1) || (s_dt > 16)) {
-+ printk
-+ ("INVALID s_dt parameter ... setting default and proceeding\n");
-+ s_dt = 1;
-+ }
-+ if ((d_dt < 1) || (d_dt > 16)) {
-+ printk
-+ ("INVALID d_dt parameter ... setting default and proceeding\n");
-+ d_dt = 1;
-+ }
-+ return (((src_inc & 0x1) << 0) |
-+ ((get_bpb_val(s_bpb) & 0x7) << 1) |
-+ ((s_dt - 1) << 4) |
-+ (0x2 << 8) |
-+ (0x0 << 11) |
-+ ((dst_inc & 0x1) << 14) |
-+ ((get_bpb_val(d_bpb) & 0x7) << 15) |
-+ ((d_dt - 1) << 18) | (0x2 << 22) | (0x0 << 25) | (swap << 28)
-+ );
-+}
-+
-+EXPORT_SYMBOL(dmac_create_ctrlval);
-+
-+void pl330_dump_regs(void)
-+{
-+ printk("Read Periph Id 0 for GDMAC is %x\n", DMAC_MEM_MAP_VALUE(0xFE0));
-+ printk("DS Register: %x\n", DMAC_MEM_MAP_VALUE(0x0));
-+ printk("Conf Reg 0 : %x\n", DMAC_MEM_MAP_VALUE(0xE00));
-+ printk("Conf Reg 1 : %x\n", DMAC_MEM_MAP_VALUE(0xE04));
-+ printk("Conf Reg 2 : %x\n", DMAC_MEM_MAP_VALUE(0xE08));
-+ printk("Conf Reg 3 : %x\n", DMAC_MEM_MAP_VALUE(0xE0C));
-+ printk("Conf Reg 4 : %x\n", DMAC_MEM_MAP_VALUE(0xE10));
-+ printk("Conf Reg d : %x\n", DMAC_MEM_MAP_VALUE(0xE14));
-+
-+ printk("Dumping the status registers \n");
-+ printk("INTEN Register: %x\n", DMAC_MEM_MAP_VALUE(0x20));
-+ printk("ES Register: %x\n", DMAC_MEM_MAP_VALUE(0x24));
-+ printk("INTSTAT Register: %x\n", DMAC_MEM_MAP_VALUE(0x28));
-+ printk("FSDM Register: %x\n", DMAC_MEM_MAP_VALUE(0x30));
-+ printk("FSC Register: %x\n", DMAC_MEM_MAP_VALUE(0x34));
-+ printk("FTM Register: %x\n", DMAC_MEM_MAP_VALUE(0x38));
-+ printk("FTC0 Register: %x\n", DMAC_MEM_MAP_VALUE(0x40));
-+ printk("FTC1 Register: %x\n", DMAC_MEM_MAP_VALUE(0x44));
-+ printk("CS0 Register: %x\n", DMAC_MEM_MAP_VALUE(0x100));
-+ printk("CPC0 Register: %x\n", DMAC_MEM_MAP_VALUE(0x104));
-+ printk("CS1 Register: %x\n", DMAC_MEM_MAP_VALUE(0x108));
-+ printk("CPC1 Register: %x\n", DMAC_MEM_MAP_VALUE(0x10C));
-+ printk("SA0 Register: %x\n", DMAC_MEM_MAP_VALUE(0x400));
-+ printk("SA1 Register: %x\n", DMAC_MEM_MAP_VALUE(0x420));
-+ printk("DA0 Register: %x\n", DMAC_MEM_MAP_VALUE(0x404));
-+ printk("DA1 Register: %x\n", DMAC_MEM_MAP_VALUE(0x424));
-+ return;
-+}
-+
-+EXPORT_SYMBOL(pl330_dump_regs);
-+
-+/*
-+ *
-+ */
-+uint32_t DMAC_READ_CHREGS(int chan, chregs_t reg)
-+{
-+ int step = 0, base = 0;
-+
-+ switch (reg) {
-+ case PL330_FTC:
-+ base = 0x40;
-+ step = chan * 0x4;
-+ break;
-+ case PL330_CS:
-+ base = 0x100;
-+ step = chan * 0x8;
-+ break;
-+ case PL330_CPC:
-+ base = 0x104;
-+ step = chan * 0x8;
-+ break;
-+ case PL330_SA:
-+ base = 0x400;
-+ step = chan * 0x20;
-+ break;
-+ case PL330_DA:
-+ base = 0x404;
-+ step = chan * 0x20;
-+ break;
-+ case PL330_CC:
-+ base = 0x408;
-+ step = chan * 0x20;
-+ break;
-+ case PL330_LC0:
-+ base = 0x40C;
-+ step = chan * 0x20;
-+ break;
-+ case PL330_LC1:
-+ base = 0x410;
-+ step = chan * 0x20;
-+ break;
-+ default:
-+ printk("Wrong argument to function %s\n", __FUNCTION__);
-+ }
-+ return DMAC_MEM_MAP_VALUE(base + step);
-+}
-+
-+EXPORT_SYMBOL(DMAC_READ_CHREGS);
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/headsmp.S
-@@ -0,0 +1,54 @@
-+/*
-+ * linux/arch/arm/mach-cns3xxx/headsmp.S
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (c) 2003 ARM Limited
-+ * All Rights Reserved
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#include <linux/linkage.h>
-+#include <linux/init.h>
-+
-+ __INIT
-+
-+/*
-+ * CNS3XXX specific entry point for secondary CPUs. This provides
-+ * a "holding pen" into which all secondary cores are held until we're
-+ * ready for them to initialise.
-+ */
-+ENTRY(cns3xxx_secondary_startup)
-+ mrc p15, 0, r0, c0, c0, 5
-+ and r0, r0, #15
-+ adr r4, 1f
-+ ldmia r4, {r5, r6}
-+ sub r4, r4, r5
-+ add r6, r6, r4
-+pen: ldr r7, [r6]
-+ cmp r7, r0
-+ bne pen
-+
-+ /*
-+ * we've been released from the holding pen: secondary_stack
-+ * should now contain the SVC stack for this core
-+ */
-+ b secondary_startup
-+
-+1: .long .
-+ .long pen_release
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/hotplug.c
-@@ -0,0 +1,155 @@
-+/*
-+ * linux/arch/arm/mach-cns3xxx/hotplug.c
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (C) 2002 ARM Ltd.
-+ * All Rights Reserved
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/smp.h>
-+#include <linux/completion.h>
-+
-+#include <asm/cacheflush.h>
-+
-+extern volatile int pen_release;
-+
-+static DECLARE_COMPLETION(cpu_killed);
-+
-+static inline void cpu_enter_lowpower(void)
-+{
-+ unsigned int v;
-+
-+ flush_cache_all();
-+ asm volatile(
-+ " mcr p15, 0, %1, c7, c5, 0\n"
-+ " mcr p15, 0, %1, c7, c10, 4\n"
-+ /*
-+ * Turn off coherency
-+ */
-+ " mrc p15, 0, %0, c1, c0, 1\n"
-+ " bic %0, %0, #0x20\n"
-+ " mcr p15, 0, %0, c1, c0, 1\n"
-+ " mrc p15, 0, %0, c1, c0, 0\n"
-+ " bic %0, %0, #0x04\n"
-+ " mcr p15, 0, %0, c1, c0, 0\n"
-+ : "=&r" (v)
-+ : "r" (0)
-+ : "cc");
-+}
-+
-+static inline void cpu_leave_lowpower(void)
-+{
-+ unsigned int v;
-+
-+ asm volatile( "mrc p15, 0, %0, c1, c0, 0\n"
-+ " orr %0, %0, #0x04\n"
-+ " mcr p15, 0, %0, c1, c0, 0\n"
-+ " mrc p15, 0, %0, c1, c0, 1\n"
-+ " orr %0, %0, #0x20\n"
-+ " mcr p15, 0, %0, c1, c0, 1\n"
-+ : "=&r" (v)
-+ :
-+ : "cc");
-+}
-+
-+static inline void platform_do_lowpower(unsigned int cpu)
-+{
-+ /*
-+ * there is no power-control hardware on this platform, so all
-+ * we can do is put the core into WFI; this is safe as the calling
-+ * code will have already disabled interrupts
-+ */
-+ for (;;) {
-+ /*
-+ * here's the WFI
-+ */
-+ asm(".word 0xe320f003\n"
-+ :
-+ :
-+ : "memory", "cc");
-+
-+ if (pen_release == cpu) {
-+ /*
-+ * OK, proper wakeup, we're done
-+ */
-+ break;
-+ }
-+
-+ /*
-+ * getting here, means that we have come out of WFI without
-+ * having been woken up - this shouldn't happen
-+ *
-+ * The trouble is, letting people know about this is not really
-+ * possible, since we are currently running incoherently, and
-+ * therefore cannot safely call printk() or anything else
-+ */
-+#ifdef DEBUG
-+ printk("CPU%u: spurious wakeup call\n", cpu);
-+#endif
-+ }
-+}
-+
-+int platform_cpu_kill(unsigned int cpu)
-+{
-+ return wait_for_completion_timeout(&cpu_killed, 5000);
-+}
-+
-+/*
-+ * platform-specific code to shutdown a CPU
-+ *
-+ * Called with IRQs disabled
-+ */
-+void platform_cpu_die(unsigned int cpu)
-+{
-+#ifdef DEBUG
-+ unsigned int this_cpu = hard_smp_processor_id();
-+
-+ if (cpu != this_cpu) {
-+ printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
-+ this_cpu, cpu);
-+ BUG();
-+ }
-+#endif
-+
-+ printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
-+ complete(&cpu_killed);
-+
-+ /*
-+ * we're ready for shutdown now, so do it
-+ */
-+ cpu_enter_lowpower();
-+ platform_do_lowpower(cpu);
-+
-+ /*
-+ * bring this CPU back into the world of cache
-+ * coherency, and then restore interrupts
-+ */
-+ cpu_leave_lowpower();
-+}
-+
-+int mach_cpu_disable(unsigned int cpu)
-+{
-+ /*
-+ * we don't allow CPU 0 to be shutdown (it is still too special
-+ * e.g. clock tick interrupts)
-+ */
-+ return cpu == 0 ? -EPERM : 0;
-+}
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/board.h
-@@ -0,0 +1,386 @@
-+/*
-+ * arch/arm/mach-cns3xxx/include/mach/board.h
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#ifndef __ASM_ARCH_BOARD_CNS3XXXH
-+#define __ASM_ARCH_BOARD_CNS3XXXH
-+
-+/*
-+ * Cavium Networks CNS3XXX Linux Memory Map:
-+ *
-+ * Phy Size Virt Description
-+ * =========================================================================
-+ *
-+ * 0x00000000 0x10000000(max) PAGE_OFFSET Alien RAM (??)
-+ *
-+ * 0x78000000 0x00400000 0xFFF09000 UART0
-+ *
-+ */
-+
-+/*
-+ * Peripheral addresses
-+ */
-+#define CNS3XXX_FLASH0_BASE 0x10000000 /* Flash/SRAM Memory Bank 0 */
-+#define CNS3XXX_FLASH0_SIZE SZ_128M
-+
-+#define CNS3XXX_FLASH1_BASE 0x11000000 /* Flash/SRAM Memory Bank 1 */
-+#define CNS3XXX_FLASH1_SIZE SZ_16M
-+#define CNS3XXX_FLASH2_BASE 0x12000000 /* Flash/SRAM Memory Bank 2 */
-+#define CNS3XXX_FLASH2_SIZE SZ_16M
-+#define CNS3XXX_FLASH3_BASE 0x13000000 /* Flash/SRAM Memory Bank 3 */
-+#define CNS3XXX_FLASH3_SIZE SZ_16M
-+
-+#define CNS3XXX_DDR2SDRAM_BASE 0x20000000 /* DDR2 SDRAM Memory */
-+
-+#define CNS3XXX_SPI_FLASH_BASE 0x60000000 /* SPI Serial Flash Memory */
-+
-+#define CNS3XXX_SWITCH_BASE 0x70000000 /* Switch and HNAT Control */
-+#define CNS3XXX_SWITCH_BASE_VIRT 0xFFF00000
-+
-+#define CNS3XXX_PPE_BASE 0x70001000 /* HANT */
-+#define CNS3XXX_PPE_BASE_VIRT 0xFFF50000
-+
-+#define CNS3XXX_EMBEDDED_SRAM_BASE 0x70002000 /* HANT Embedded SRAM */
-+#define CNS3XXX_EMBEDDED_SRAM_BASE_VIRT 0xFFF60000
-+
-+#define CNS3XXX_SSP_BASE 0x71000000 /* Synchronous Serial Port - SPI/PCM/I2C */
-+#define CNS3XXX_SSP_BASE_VIRT 0xFFF01000
-+
-+#define CNS3XXX_DMC_BASE 0x72000000 /* DMC Control (DDR2 SDRAM) */
-+#define CNS3XXX_DMC_BASE_VIRT 0xFFF02000
-+
-+#define CNS3XXX_SMC_BASE 0x73000000 /* SMC Control */
-+#define CNS3XXX_SMC_BASE_VIRT 0xFFF03000
-+
-+#define SMC_MEMC_STATUS_OFFSET 0x000
-+#define SMC_MEMIF_CFG_OFFSET 0x004
-+#define SMC_MEMC_CFG_SET_OFFSET 0x008
-+#define SMC_MEMC_CFG_CLR_OFFSET 0x00C
-+#define SMC_DIRECT_CMD_OFFSET 0x010
-+#define SMC_SET_CYCLES_OFFSET 0x014
-+#define SMC_SET_OPMODE_OFFSET 0x018
-+#define SMC_REFRESH_PERIOD_0_OFFSET 0x020
-+#define SMC_REFRESH_PERIOD_1_OFFSET 0x024
-+#define SMC_SRAM_CYCLES0_0_OFFSET 0x100
-+#define SMC_NAND_CYCLES0_0_OFFSET 0x100
-+#define SMC_OPMODE0_0_OFFSET 0x104
-+#define SMC_SRAM_CYCLES0_1_OFFSET 0x120
-+#define SMC_NAND_CYCLES0_1_OFFSET 0x120
-+#define SMC_OPMODE0_1_OFFSET 0x124
-+#define SMC_USER_STATUS_OFFSET 0x200
-+#define SMC_USER_CONFIG_OFFSET 0x204
-+#define SMC_ECC_STATUS_OFFSET 0x300
-+#define SMC_ECC_MEMCFG_OFFSET 0x304
-+#define SMC_ECC_MEMCOMMAND1_OFFSET 0x308
-+#define SMC_ECC_MEMCOMMAND2_OFFSET 0x30C
-+#define SMC_ECC_ADDR0_OFFSET 0x310
-+#define SMC_ECC_ADDR1_OFFSET 0x314
-+#define SMC_ECC_VALUE0_OFFSET 0x318
-+#define SMC_ECC_VALUE1_OFFSET 0x31C
-+#define SMC_ECC_VALUE2_OFFSET 0x320
-+#define SMC_ECC_VALUE3_OFFSET 0x324
-+#define SMC_PERIPH_ID_0_OFFSET 0xFE0
-+#define SMC_PERIPH_ID_1_OFFSET 0xFE4
-+#define SMC_PERIPH_ID_2_OFFSET 0xFE8
-+#define SMC_PERIPH_ID_3_OFFSET 0xFEC
-+#define SMC_PCELL_ID_0_OFFSET 0xFF0
-+#define SMC_PCELL_ID_1_OFFSET 0xFF4
-+#define SMC_PCELL_ID_2_OFFSET 0xFF8
-+#define SMC_PCELL_ID_3_OFFSET 0xFFC
-+
-+#define CNS3XXX_GPIOA_BASE 0x74000000 /* GPIO port A */
-+#define CNS3XXX_GPIOA_BASE_VIRT 0xFFF04000
-+
-+#define CNS3XXX_GPIOB_BASE 0x74800000 /* GPIO port B */
-+#define CNS3XXX_GPIOB_BASE_VIRT 0xFFF05000
-+
-+#define CNS3XXX_RTC_BASE 0x75000000 /* Real Time Clock */
-+#define CNS3XXX_RTC_BASE_VIRT 0xFFF06000
-+
-+#define RTC_SEC_OFFSET 0x00
-+#define RTC_MIN_OFFSET 0x04
-+#define RTC_HOUR_OFFSET 0x08
-+#define RTC_DAY_OFFSET 0x0C
-+#define RTC_SEC_ALM_OFFSET 0x10
-+#define RTC_MIN_ALM_OFFSET 0x14
-+#define RTC_HOUR_ALM_OFFSET 0x18
-+#define RTC_REC_OFFSET 0x1C
-+#define RTC_CTRL_OFFSET 0x20
-+#define RTC_INTR_STS_OFFSET 0x34
-+
-+#define CNS3XXX_MISC_BASE 0x76000000 /* Misc Control */
-+#define CNS3XXX_MISC_BASE_VIRT 0xFFF07000 /* Misc Control */
-+
-+#define CNS3XXX_PM_BASE 0x77000000 /* Power Management Control */
-+#define CNS3XXX_PM_BASE_VIRT 0xFFF08000
-+
-+#define PM_CLK_GATE_OFFSET 0x00
-+#define PM_SOFT_RST_OFFSET 0x04
-+#define PM_HS_CFG_OFFSET 0x08
-+#define PM_CACTIVE_STA_OFFSET 0x0C
-+#define PM_PWR_STA_OFFSET 0x10
-+#define PM_SYS_CLK_CTRL_OFFSET 0x14
-+#define PM_PLL_LCD_I2S_CTRL_OFFSET 0x18
-+#define PM_PLL_HM_PD_OFFSET 0x1C
-+
-+#define CNS3XXX_UART0_BASE 0x78000000 /* UART 0 */
-+#define CNS3XXX_UART0_BASE_VIRT 0xFFF09000
-+
-+#define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */
-+#define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000
-+
-+#define CNS3XXX_UART2_BASE 0x78800000 /* UART 2 */
-+#define CNS3XXX_UART2_BASE_VIRT 0xFFF0B000
-+
-+#define CNS3XXX_UART3_BASE 0x78C00000 /* UART 3 */
-+#define CNS3XXX_UART3_BASE_VIRT 0xFFF0C000
-+
-+#define CNS3XXX_DMAC_BASE 0x79000000 /* Generic DMA Control */
-+#define CNS3XXX_DMAC_BASE_VIRT 0xFFF0D000
-+
-+#define CNS3XXX_CORESIGHT_BASE 0x7A000000 /* CoreSight */
-+#define CNS3XXX_CORESIGHT_BASE_VIRT 0xFFF0E000
-+
-+#define CNS3XXX_CRYPTO_BASE 0x7B000000 /* Crypto */
-+#define CNS3XXX_CRYPTO_BASE_VIRT 0xFFF0F000
-+
-+#define CNS3XXX_I2S_BASE 0x7C000000 /* I2S */
-+#define CNS3XXX_I2S_BASE_VIRT 0xFFF10000
-+
-+#define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */
-+#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFFF10800
-+
-+#define TIMER1_COUNTER_OFFSET 0x00
-+#define TIMER1_AUTO_RELOAD_OFFSET 0x04
-+#define TIMER1_MATCH_V1_OFFSET 0x08
-+#define TIMER1_MATCH_V2_OFFSET 0x0C
-+
-+#define TIMER2_COUNTER_OFFSET 0x10
-+#define TIMER2_AUTO_RELOAD_OFFSET 0x14
-+#define TIMER2_MATCH_V1_OFFSET 0x18
-+#define TIMER2_MATCH_V2_OFFSET 0x1C
-+
-+#define TIMER1_2_CONTROL_OFFSET 0x30
-+#define TIMER1_2_INTERRUPT_STATUS_OFFSET 0x34
-+#define TIMER1_2_INTERRUPT_MASK_OFFSET 0x38
-+
-+#define TIMER_FREERUN_OFFSET 0x40
-+#define TIMER_FREERUN_CONTROL_OFFSET 0x44
-+
-+#define CNS3XXX_HCIE_BASE 0x7D000000 /* HCIE Control */
-+#if 0
-+#define CNS3XXX_HCIE_BASE_VIRT 0xFFF11000
-+#else
-+#define CNS3XXX_HCIE_BASE_VIRT 0xFFF30000
-+#endif
-+
-+#define CNS3XXX_RAID_BASE 0x7E000000 /* RAID Control */
-+#define CNS3XXX_RAID_BASE_VIRT 0xFFF12000
-+
-+#define CNS3XXX_AXI_IXC_BASE 0x7F000000 /* AXI IXC */
-+#define CNS3XXX_AXI_IXC_BASE_VIRT 0xFFF13000
-+
-+#define CNS3XXX_CLCD_BASE 0x80000000 /* LCD Control */
-+#define CNS3XXX_CLCD_BASE_VIRT 0xFFF14000
-+
-+#define CNS3XXX_USBOTG_BASE 0x81000000 /* USB OTG Control */
-+#define CNS3XXX_USBOTG_BASE_VIRT 0xFFF15000
-+
-+#define CNS3XXX_USB_BASE 0x82000000 /* USB Host Control */
-+#define CNS3XXX_USB_BASE_VIRT 0xFFF16000
-+
-+#define CNS3XXX_SATA2_BASE 0x83000000 /* SATA */
-+#define CNS3XXX_SATA2_SIZE SZ_16M
-+#define CNS3XXX_SATA2_BASE_VIRT 0xFFF17000
-+
-+#define CNS3XXX_CAMERA_BASE 0x84000000 /* Camera Interface */
-+#define CNS3XXX_CAMERA_BASE_VIRT 0xFFF18000
-+
-+#define CNS3XXX_SDIO_BASE 0x85000000 /* SDIO */
-+#define CNS3XXX_SDIO_BASE_VIRT 0xFFF19000
-+
-+#define CNS3XXX_I2S_TDM_BASE 0x86000000 /* I2S TDM */
-+#define CNS3XXX_I2S_TDM_BASE_VIRT 0xFFF1A000
-+
-+#define CNS3XXX_2DG_BASE 0x87000000 /* 2D Graphic Control */
-+#define CNS3XXX_2DG_BASE_VIRT 0xFFF1B000
-+
-+#define CNS3XXX_USB_OHCI_BASE 0x88000000 /* USB OHCI */
-+#define CNS3XXX_USB_OHCI_BASE_VIRT 0xFFF1C000
-+
-+#define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */
-+#define CNS3XXX_L2C_BASE_VIRT 0xFFF27000
-+
-+#define CNS3XXX_PCIE0_MEM_BASE 0xA0000000 /* PCIe Port 0 IO/Memory Space */
-+#define CNS3XXX_PCIE0_MEM_BASE_VIRT 0xE0000000
-+
-+#define CNS3XXX_PCIE0_HOST_BASE 0xAB000000 /* PCIe Port 0 RC Base */
-+#define CNS3XXX_PCIE0_HOST_BASE_VIRT 0xE1000000
-+
-+#define CNS3XXX_PCIE0_IO_BASE 0xAC000000 /* PCIe Port 0 */
-+#define CNS3XXX_PCIE0_IO_BASE_VIRT 0xE2000000
-+
-+#define CNS3XXX_PCIE0_CFG0_BASE 0xAD000000 /* PCIe Port 0 CFG Type 0 */
-+#define CNS3XXX_PCIE0_CFG0_BASE_VIRT 0xE3000000
-+
-+#define CNS3XXX_PCIE0_CFG1_BASE 0xAE000000 /* PCIe Port 0 CFG Type 1 */
-+#define CNS3XXX_PCIE0_CFG1_BASE_VIRT 0xE4000000
-+
-+#define CNS3XXX_PCIE0_MSG_BASE 0xAF000000 /* PCIe Port 0 Message Space */
-+#define CNS3XXX_PCIE0_MSG_BASE_VIRT 0xE5000000
-+
-+#define CNS3XXX_PCIE1_MEM_BASE 0xB0000000 /* PCIe Port 1 IO/Memory Space */
-+#define CNS3XXX_PCIE1_MEM_BASE_VIRT 0xE8000000
-+
-+#define CNS3XXX_PCIE1_HOST_BASE 0xBB000000 /* PCIe Port 1 RC Base */
-+#define CNS3XXX_PCIE1_HOST_BASE_VIRT 0xE9000000
-+
-+#define CNS3XXX_PCIE1_IO_BASE 0xBC000000 /* PCIe Port 1 */
-+#define CNS3XXX_PCIE1_IO_BASE_VIRT 0xEA000000
-+
-+#define CNS3XXX_PCIE1_CFG0_BASE 0xBD000000 /* PCIe Port 1 CFG Type 0 */
-+#define CNS3XXX_PCIE1_CFG0_BASE_VIRT 0xEB000000
-+
-+#define CNS3XXX_PCIE1_CFG1_BASE 0xBE000000 /* PCIe Port 1 CFG Type 1 */
-+#define CNS3XXX_PCIE1_CFG1_BASE_VIRT 0xEC000000
-+
-+#define CNS3XXX_PCIE1_MSG_BASE 0xBF000000 /* PCIe Port 1 Message Space */
-+#define CNS3XXX_PCIE1_MSG_BASE_VIRT 0xED000000
-+
-+/*
-+ * Testchip peripheral and fpga gic regions
-+ */
-+//#define CNS3XXX_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */
-+#define CNS3XXX_TC11MP_SCU_BASE 0x90000000 /* IRQ, Test chip */
-+#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFF000000
-+
-+//#define CNS3XXX_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */
-+#define CNS3XXX_TC11MP_GIC_CPU_BASE 0x90000100 /* Test chip interrupt controller CPU interface */
-+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT 0xFF000100
-+
-+//#define CNS3XXX_TC11MP_TWD_BASE 0x1F000600
-+#define CNS3XXX_TC11MP_TWD_BASE 0x90000600
-+#define CNS3XXX_TC11MP_TWD_BASE_VIRT 0xFF000600
-+
-+//#define CNS3XXX_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */
-+#define CNS3XXX_TC11MP_GIC_DIST_BASE 0x90001000 /* Test chip interrupt controller distributor */
-+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT 0xFF001000
-+
-+//#define CNS3XXX_TC11MP_L220_BASE 0x1F002000 /* L220 registers */
-+#define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */
-+#define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000
-+
-+/*
-+ * Irqs
-+ */
-+#define IRQ_TC11MP_GIC_START 32
-+
-+/*
-+ * ARM11 MPCore test chip interrupt sources (primary GIC on the test chip)
-+ */
-+#define IRQ_CNS3XXX_PMU (IRQ_TC11MP_GIC_START + 0)
-+#define IRQ_CNS3XXX_SDIO (IRQ_TC11MP_GIC_START + 1)
-+#define IRQ_CNS3XXX_L2CC (IRQ_TC11MP_GIC_START + 2)
-+#define IRQ_CNS3XXX_RTC (IRQ_TC11MP_GIC_START + 3)
-+#define IRQ_CNS3XXX_I2S (IRQ_TC11MP_GIC_START + 4)
-+#define IRQ_CNS3XXX_PCM (IRQ_TC11MP_GIC_START + 5)
-+#define IRQ_CNS3XXX_SPI (IRQ_TC11MP_GIC_START + 6)
-+#define IRQ_CNS3XXX_I2C (IRQ_TC11MP_GIC_START + 7)
-+#define IRQ_CNS3XXX_CIM (IRQ_TC11MP_GIC_START + 8)
-+#define IRQ_CNS3XXX_GPU (IRQ_TC11MP_GIC_START + 9)
-+#define IRQ_CNS3XXX_LCD (IRQ_TC11MP_GIC_START + 10)
-+#define IRQ_CNS3XXX_GPIOA (IRQ_TC11MP_GIC_START + 11)
-+#define IRQ_CNS3XXX_GPIOB (IRQ_TC11MP_GIC_START + 12)
-+#define IRQ_CNS3XXX_UART0 (IRQ_TC11MP_GIC_START + 13)
-+#define IRQ_CNS3XXX_UART1 (IRQ_TC11MP_GIC_START + 14)
-+#define IRQ_CNS3XXX_UART2 (IRQ_TC11MP_GIC_START + 15)
-+#define IRQ_CNS3XXX_ARM11 (IRQ_TC11MP_GIC_START + 16)
-+
-+#define IRQ_CNS3XXX_SW_STATUS (IRQ_TC11MP_GIC_START + 17)
-+#define IRQ_CNS3XXX_SW_R0TXC (IRQ_TC11MP_GIC_START + 18)
-+#define IRQ_CNS3XXX_SW_R0RXC (IRQ_TC11MP_GIC_START + 19)
-+#define IRQ_CNS3XXX_SW_R0QE (IRQ_TC11MP_GIC_START + 20)
-+#define IRQ_CNS3XXX_SW_R0QF (IRQ_TC11MP_GIC_START + 21)
-+#define IRQ_CNS3XXX_SW_R1TXC (IRQ_TC11MP_GIC_START + 22)
-+#define IRQ_CNS3XXX_SW_R1RXC (IRQ_TC11MP_GIC_START + 23)
-+#define IRQ_CNS3XXX_SW_R1QE (IRQ_TC11MP_GIC_START + 24)
-+#define IRQ_CNS3XXX_SW_R1QF (IRQ_TC11MP_GIC_START + 25)
-+#define IRQ_CNS3XXX_SW_PPE (IRQ_TC11MP_GIC_START + 26)
-+
-+#define IRQ_CNS3XXX_CRYPTO (IRQ_TC11MP_GIC_START + 27)
-+#define IRQ_CNS3XXX_HCIE (IRQ_TC11MP_GIC_START + 28)
-+#define IRQ_CNS3XXX_PCIE0_DEVICE (IRQ_TC11MP_GIC_START + 29)
-+#define IRQ_CNS3XXX_PCIE1_DEVICE (IRQ_TC11MP_GIC_START + 30)
-+#define IRQ_CNS3XXX_USB_OTG (IRQ_TC11MP_GIC_START + 31)
-+#define IRQ_CNS3XXX_USB_EHCI (IRQ_TC11MP_GIC_START + 32)
-+#define IRQ_CNS3XXX_SATA (IRQ_TC11MP_GIC_START + 33)
-+#define IRQ_CNS3XXX_RAID (IRQ_TC11MP_GIC_START + 34)
-+#define IRQ_CNS3XXX_SMC (IRQ_TC11MP_GIC_START + 35)
-+
-+#define IRQ_CNS3XXX_DMAC_ABORT (IRQ_TC11MP_GIC_START + 36)
-+#define IRQ_CNS3XXX_DMAC0 (IRQ_TC11MP_GIC_START + 37)
-+#define IRQ_CNS3XXX_DMAC1 (IRQ_TC11MP_GIC_START + 38)
-+#define IRQ_CNS3XXX_DMAC2 (IRQ_TC11MP_GIC_START + 39)
-+#define IRQ_CNS3XXX_DMAC3 (IRQ_TC11MP_GIC_START + 40)
-+#define IRQ_CNS3XXX_DMAC4 (IRQ_TC11MP_GIC_START + 41)
-+#define IRQ_CNS3XXX_DMAC5 (IRQ_TC11MP_GIC_START + 42)
-+#define IRQ_CNS3XXX_DMAC6 (IRQ_TC11MP_GIC_START + 43)
-+#define IRQ_CNS3XXX_DMAC7 (IRQ_TC11MP_GIC_START + 44)
-+#define IRQ_CNS3XXX_DMAC8 (IRQ_TC11MP_GIC_START + 45)
-+#define IRQ_CNS3XXX_DMAC9 (IRQ_TC11MP_GIC_START + 46)
-+#define IRQ_CNS3XXX_DMAC10 (IRQ_TC11MP_GIC_START + 47)
-+#define IRQ_CNS3XXX_DMAC11 (IRQ_TC11MP_GIC_START + 48)
-+#define IRQ_CNS3XXX_DMAC12 (IRQ_TC11MP_GIC_START + 49)
-+#define IRQ_CNS3XXX_DMAC13 (IRQ_TC11MP_GIC_START + 50)
-+#define IRQ_CNS3XXX_DMAC14 (IRQ_TC11MP_GIC_START + 51)
-+#define IRQ_CNS3XXX_DMAC15 (IRQ_TC11MP_GIC_START + 52)
-+#define IRQ_CNS3XXX_DMAC16 (IRQ_TC11MP_GIC_START + 53)
-+#define IRQ_CNS3XXX_DMAC17 (IRQ_TC11MP_GIC_START + 54)
-+
-+#define IRQ_CNS3XXX_PCIE0_RC (IRQ_TC11MP_GIC_START + 55)
-+#define IRQ_CNS3XXX_PCIE1_RC (IRQ_TC11MP_GIC_START + 56)
-+#define IRQ_CNS3XXX_TIMER0 (IRQ_TC11MP_GIC_START + 57)
-+#define IRQ_CNS3XXX_TIMER1 (IRQ_TC11MP_GIC_START + 58)
-+#define IRQ_CNS3XXX_USB_OHCI (IRQ_TC11MP_GIC_START + 59)
-+#define IRQ_CNS3XXX_TIMER2 (IRQ_TC11MP_GIC_START + 60)
-+#define IRQ_CNS3XXX_EXTERNAL_PIN0 (IRQ_TC11MP_GIC_START + 61)
-+#define IRQ_CNS3XXX_EXTERNAL_PIN1 (IRQ_TC11MP_GIC_START + 62)
-+#define IRQ_CNS3XXX_EXTERNAL_PIN2 (IRQ_TC11MP_GIC_START + 63)
-+
-+#define NR_GIC_CNS3XXX 1
-+
-+/*
-+ * Only define NR_IRQS if less than NR_IRQS_CNS3XXX
-+ */
-+#define NR_IRQS_CNS3XXX (IRQ_TC11MP_GIC_START + 64)
-+
-+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_CNS3XXX)
-+#undef NR_IRQS
-+#define NR_IRQS NR_IRQS_CNS3XXX
-+#endif
-+
-+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_CNS3XXX)
-+#undef MAX_GIC_NR
-+#define MAX_GIC_NR NR_GIC_CNS3XXX
-+#endif
-+
-+#endif /* __ASM_ARCH_BOARD_CNS3XXX_H */
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/camera.h
-@@ -0,0 +1,97 @@
-+/*
-+ camera.h - CNS3XXX camera driver header file
-+
-+ Copyright (C) 2003, Intel Corporation
-+ Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+*/
-+
-+#ifndef __ASM_ARCH_CAMERA_H_
-+#define __ASM_ARCH_CAMERA_H_
-+
-+#define CNS3XXX_CAMERA_MASTER 0x01
-+#define CNS3XXX_CAMERA_DATAWIDTH_4 0x02
-+#define CNS3XXX_CAMERA_DATAWIDTH_5 0x04
-+#define CNS3XXX_CAMERA_DATAWIDTH_8 0x08
-+#define CNS3XXX_CAMERA_DATAWIDTH_9 0x10
-+#define CNS3XXX_CAMERA_DATAWIDTH_10 0x20
-+#define CNS3XXX_CAMERA_PCLK_EN 0x40
-+#define CNS3XXX_CAMERA_MCLK_EN 0x80
-+#define CNS3XXX_CAMERA_PCP 0x100
-+#define CNS3XXX_CAMERA_HSP 0x200
-+#define CNS3XXX_CAMERA_VSP 0x400
-+
-+/* Camera Interface */
-+#define CIM_GLOBAL_REG 0x00 /* CIM control*/
-+#define CIM_TIMING_V_REG 0x04 /* Vertical capture range setting */
-+#define CIM_TIMING_H_REG 0x08 /* Horizontal capture range setting */
-+#define CIM_CCIR656_0_REG 0x0C /* CCIR656 detect and control setting*/
-+#define CIM_CCIR656_1_REG 0x10 /* CCIR656 self test setting */
-+#define CIM_SERIAL_SRC_REG 0x14 /* Serial pix capture module control settings */
-+#define CIM_INT_MASK_REG 0x28 /* CIM interrupt mask register. */
-+#define CIM_INT_STATUS_REG 0x2C /* CIM interrupt status register. */
-+#define CIM_INT_CLEAR_REG 0x30 /* CIM interrupt clear register. */
-+#define CIM_DATAPATH_CTL_REG 0x34 /* CIM data path options and control settings */
-+#define CIM_VIDEO_PORT_REG 0x100 /* CIM¡¦s video port */
-+#define CIM_CORRECTION_R_REG 0x200 /* Internal programmable table for R component. */
-+#define CIM_CORRECTION_G_REG 0x600 /* Internal programmable table for G component. */
-+#define CIM_CORRECTION_B_REG 0xA00 /* Internal programmable table for B component. */
-+
-+#define SRC_DATA_FMT_CCIR656 0x00
-+#define SRC_DATA_FMT_YCBCR_A 0x01
-+#define SRC_DATA_FMT_YCBCR_B 0x02
-+#define SRC_DATA_FMT_RGB565 0x03
-+#define SRC_DATA_FMT_RGB555 0x04
-+#define SRC_DATA_FMT_BAYER_82 0x05
-+#define SRC_DATA_FMT_BAYER_10 0x06
-+
-+#define DST_DATA_FMT_RGB888 0x00
-+#define DST_DATA_FMT_RGB565 0x01
-+#define DST_DATA_FMT_RGB1555 0x02
-+#define DST_DATA_FMT_RGB444 0x03
-+
-+#define CISR_LAST_LINE (1 << 0) /* Last line */
-+#define CISR_FIRST_LINE (1 << 1) /* First line */
-+#define CISR_LINE_END (1 << 2) /* Line end */
-+#define CISR_LINE_START (1 << 3) /* Line start */
-+#define CISR_FIELD_CHG (1 << 4) /* Field Change */
-+#define CISR_FIFO_OVERRUN (1 << 5) /* FIFO overrun */
-+
-+
-+#define CIMR_LAST_LINE_M (1 << 0) /* Last line mask*/
-+#define CIMR_FIRST_LINE_M (1 << 1) /* First line mask*/
-+#define CIMR_LINE_END_M (1 << 2) /* Line end mask*/
-+#define CIMR_LINE_START_M (1 << 3) /* Line start mask*/
-+#define CIMR_FIELD_CHG_M (1 << 4) /* Field Change mask*/
-+#define CIMR_FIFO_OVERRUN_M (1 << 5) /* FIFO overrun mask*/
-+
-+
-+struct cns3xxx_camera_platform_data {
-+#if 0
-+ int (*init)(struct device *);
-+ int (*power)(struct device *, int);
-+ int (*reset)(struct device *, int);
-+#endif
-+
-+ unsigned long flags;
-+ unsigned long mclk_10khz;
-+ unsigned long lcd_base;
-+ unsigned long misc_base;
-+};
-+
-+//extern void cns3xxx_set_camera_info(struct pxacamera_platform_data *);
-+
-+#endif /* __ASM_ARCH_CAMERA_H_ */
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/clkdev.h
-@@ -0,0 +1,7 @@
-+#ifndef __ASM_MACH_CLKDEV_H
-+#define __ASM_MACH_CLKDEV_H
-+
-+#define __clk_get(clk) ({ 1; })
-+#define __clk_put(clk) do { } while (0)
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
-@@ -0,0 +1,35 @@
-+/* arch/arm/mach-cns3xxx/include/mach/debug-macro.S
-+ *
-+ * Debugging macro include header
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (C) 1994-1999 Russell King
-+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+ .macro addruart,rx
-+ mrc p15, 0, \rx, c1, c0
-+ tst \rx, #1 @ MMU enabled?
-+ moveq \rx, #0x10000000
-+ movne \rx, #0xf0000000 @ virtual base
-+ orr \rx, \rx, #0x00009000
-+ .endm
-+
-+#include <asm/hardware/debug-pl01x.S>
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/dmac.h
-@@ -0,0 +1,295 @@
-+/*******************************************************************************
-+ *
-+ * arch/arm/mach-cns3xxx/dmac.h
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ *
-+ ******************************************************************************/
-+
-+#ifndef _CNS3XXX_DMAC_H_
-+#define _CNS3XXX_DMAC_H_
-+
-+#define MAX_DMA_CHANNELS 9
-+#define DMAC_PCM1_PERIPH_ID_0 4
-+#define DMAC_SPI_PERIPH_ID 8
-+#define DMAC_PCM_PERIPH_ID_0 9
-+#define CNS3XXX_DMAC_I2STX_PID 12
-+#define CNS3XXX_DMAC_I2SRX_PID 13
-+
-+/* APIs */
-+int __init dmac_init(void);
-+extern int dmac_get_channel (int (*handler)(void*), void *handler_args);
-+extern int dmac_get_channel_ex(int channel, int (*handler) (void *), void *handler_args);
-+extern int dmac_release_channel(int chan);
-+
-+extern int dmac_get_event (int chan, int ev);
-+extern int dmac_release_event (int chan, int ev);
-+
-+extern uint32_t dmac_create_ctrlval (int src_inc, int s_bpb, int s_dt, int dst_inc, int d_bpb, int d_dt, int swap);
-+/* enum - reg ? 0 => PL330_FTC, 1 => PL330_CS, 2 => PL330_CPC, 3 => PL330_SA,
-+ * 4 => PL330_DA, 5=>PL330_CC, 6 => PL330_LC0, 7 => PL330_LC1
-+ */
-+typedef enum { PL330_FTC =0,
-+ PL330_CS,
-+ PL330_CPC,
-+ PL330_SA,
-+ PL330_DA,
-+ PL330_CC,
-+ PL330_LC0,
-+ PL330_LC1
-+} chregs_t;
-+
-+extern uint32_t DMAC_READ_CHREGS (int chan, chregs_t reg);
-+
-+/* Instruction Set */
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAEND
-+ * Description:
-+ * | 7 6 5 4 | 3 2 1 0 |
-+ * 0 0 0 0 0 0 0 0
-+ * Example:
-+ * DMAEND
-+ * 00
-+ ******************************************************************************/
-+int DMAC_DMAEND(int ch_num);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAFLUSHP
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * <periph[4:0] > 0 0 0 0 0 1 1 0 1 0 1
-+ * Example:
-+ * DMAFLUSHP P0
-+ * 35 00
-+ ******************************************************************************/
-+#define DMAFLUSHP_INSTR_SIZE 2
-+int DMAC_DMAFLUSHP(int ch_num, int periph);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAGO
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * 0 0 0 0 0 <cn[2:0]> 1 0 1 0 0 0 ns 0
-+ *
-+ * | 47 16 |
-+ * < imm[31:0] >
-+ * Example:
-+ * DMAGO C0, 0x40000000
-+ * A0 00 00 00 00 40
-+ ******************************************************************************/
-+int DMAC_DMAGO(int ch_num);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMALD
-+ * Description:
-+ * | 7 6 5 4 | 3 2 1 0 |
-+ * 0 0 0 0 0 1 bs x
-+ * Example:
-+ * DMALD
-+ * 04
-+ ******************************************************************************/
-+#define DMALD_INSTR_SIZE 1
-+#define DMALDB_INSTR_SIZE 1
-+#define DMALDS_INSTR_SIZE 1
-+int DMAC_DMALD(int ch_num);
-+
-+int DMAC_DMALDB(int ch_num);
-+
-+int DMAC_DMALDS(int ch_num);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMALP
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * < iter[7:0] > 0 0 1 0 0 0 lc 0
-+ * Example:
-+ * DMALP 8
-+ * 20 07
-+ ******************************************************************************/
-+#define DMALP_INSTR_SIZE 2
-+int DMAC_DMALP(int ch_num, int loop_reg_idx, int iter);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMALPEND
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * < backwards_jump[7:0] > 0 0 1 nf 1 lc bs x
-+ * Example:
-+ * DMALPEND
-+ * 38 04
-+ ******************************************************************************/
-+#define DMALPEND_INSTR_SIZE 2
-+int DMAC_DMALPEND(int ch_num, int loop_reg_idx, int jump, int lpfe);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAMOV
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * 0 0 0 0 0 <rd[2:0]> 1 0 1 1 1 1 0 0
-+ *
-+ * | 47 16 |
-+ * < imm[31:0] >
-+ *
-+ * # CCR Description
-+ * # [30:28] Endian swap size
-+ * # [27:25] AWCACHE[3,1:0] value
-+ * # [24:22] AWPROT value
-+ * # [21:18] AWLEN value
-+ * # [17:15] AWSIZE value
-+ * # [14] AWBURST[0] value
-+ * 0 - FIXED / 1 - INCR
-+ * # [13:11] ARCACHE[2:0] value
-+ * # [10:8] ARPROT value
-+ * # [7:4] ARLEN value
-+ * # [3:1] ARSIZE value
-+ * # [0] ARBURST[0] value
-+ * 0 - FIXED / 1 - INCR
-+ * Example:
-+ * DMAMOV CCR, SB1 SS32 DB1 DS32
-+ * BC 01 05 40 01 00
-+ ******************************************************************************/
-+
-+#define DMAMOV_INSTR_SIZE 6
-+/* ccr_sar_dar: 0 for SAR, 1, for CCR, 2 for DAR */
-+typedef enum { SAR = 0, CCR = 1, DAR = 2 } dmamov_arg_t;
-+int DMAC_DMAMOV(int ch_num, dmamov_arg_t ccr_sar_dar, uint32_t value);
-+
-+#define DMAWMB_INSTR_SIZE 1
-+int DMAC_DMAWMB (int ch_num);
-+
-+#define DMANOP_INSTR_SIZE 1
-+int DMAC_DMANOP (int ch_num);
-+/******************************************************************************
-+ *
-+ * Instruction: DMAST
-+ * Description:
-+ * | 7 6 5 4 | 3 2 1 0 |
-+ * 0 0 0 0 1 0 bs x
-+ * Example:
-+ * DMAST
-+ * 08
-+ ******************************************************************************/
-+#define DMAST_INSTR_SIZE 1 /* 1 Byte */
-+int DMAC_DMAST(int ch_num);
-+
-+#define DMASTB_INSTR_SIZE 1 /* 1 Byte */
-+int DMAC_DMASTB(int ch_num);
-+
-+#define DMASTS_INSTR_SIZE 1 /* 1 Byte */
-+int DMAC_DMASTS(int ch_num);
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMASTZ
-+ * Description:
-+ * | 7 6 5 4 | 3 2 1 0 |
-+ * 0 0 0 0 1 1 0 0
-+ * Example:
-+ * DMASTZ
-+ * 08
-+ ******************************************************************************/
-+/* Not done */
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAWFE
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * <event_num[4:0]> 0 i 0 0 0 1 1 0 1 1 0
-+ * Example:
-+ * DMAWFE E0
-+ * 36 00
-+ ******************************************************************************/
-+int DMAC_WFE(int ch_num, int event);
-+#define DMAWFE_INSTR_SIZE 2
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAWFP
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * < periph[4:0] > 0 0 0 0 0 1 1 0 0 bs p
-+ * Example:
-+ * DMAWFP P0, periph
-+ * 31 00
-+ ******************************************************************************/
-+typedef enum { SINGLE = 0, BURST = 1, PERIPHERAL = 2} dmawfp_burst_type;
-+int DMAC_DMAWFP(int ch_num, int periph_id,dmawfp_burst_type b);
-+#define DMAWFP_INSTR_SIZE 2
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMAKILL
-+ * Description:
-+ * | 7 6 5 4 | 3 2 1 0 |
-+ * 0 0 0 0 0 0 0 1
-+ * Example:
-+ * DMAKILL
-+ * 01
-+ ******************************************************************************/
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMASEV
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * <event_num[4:0]> 0 i 0 0 0 1 1 0 1 0 0
-+ * Example:
-+ * DMASEV E0
-+ * 34 00
-+ ******************************************************************************/
-+int DMAC_DMASEV(int ch_num, int event_num);
-+#define DMASEV_INSTR_SIZE 2
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMALDP<S|B>
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * < periph[4:0] > 0 0 0 0 0 1 0 0 1 bs 1
-+ * Example:
-+ * DMALDPS P0
-+ * 25 00
-+ ******************************************************************************/
-+int DMAC_DMALDP(int ch_num, int periph_id, int burst);
-+#define DMALDP_INSTR_SIZE 2
-+
-+/******************************************************************************
-+ *
-+ * Instruction: DMASTP<S|B>
-+ * Description:
-+ * | 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 |
-+ * < periph[4:0] > 0 0 0 0 0 1 0 1 0 bs 1
-+ * Example:
-+ * DMASTPS P0
-+ * 29 00
-+ ******************************************************************************/
-+int DMAC_DMASTP(int ch_num, int periph_id, int burst);
-+#define DMASTP_INSTR_SIZE 2
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
-@@ -0,0 +1,105 @@
-+/*
-+ * arch/arm/mach-cns3xxx/include/mach/entry-macro.S
-+ *
-+ * Low-level IRQ helper macros for Cavium Networks platforms
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+#include <mach/hardware.h>
-+#include <asm/hardware/gic.h>
-+
-+ .macro disable_fiq
-+ .endm
-+
-+ .macro get_irqnr_preamble, base, tmp
-+ ldr \base, =gic_cpu_base_addr
-+ ldr \base, [\base]
-+ .endm
-+
-+ .macro arch_ret_to_user, tmp1, tmp2
-+ .endm
-+
-+ /*
-+ * The interrupt numbering scheme is defined in the
-+ * interrupt controller spec. To wit:
-+ *
-+ * Interrupts 0-15 are IPI
-+ * 16-28 are reserved
-+ * 29-31 are local. We allow 30 to be used for the watchdog.
-+ * 32-1020 are global
-+ * 1021-1022 are reserved
-+ * 1023 is "spurious" (no interrupt)
-+ *
-+ * For now, we ignore all local interrupts so only return an interrupt if it's
-+ * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
-+ *
-+ * A simple read from the controller will tell us the number of the highest
-+ * priority enabled interrupt. We then just need to check whether it is in the
-+ * valid range for an IRQ (30-1020 inclusive).
-+ */
-+
-+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-+
-+ ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-+
-+ ldr \tmp, =1021
-+
-+ bic \irqnr, \irqstat, #0x1c00
-+
-+ cmp \irqnr, #29
-+ cmpcc \irqnr, \irqnr
-+ cmpne \irqnr, \tmp
-+ cmpcs \irqnr, \irqnr
-+
-+ .endm
-+
-+ /* We assume that irqstat (the raw value of the IRQ acknowledge
-+ * register) is preserved from the macro above.
-+ * If there is an IPI, we immediately signal end of interrupt on the
-+ * controller, since this requires the original irqstat value which
-+ * we won't easily be able to recreate later.
-+ */
-+
-+ .macro test_for_ipi, irqnr, irqstat, base, tmp
-+ bic \irqnr, \irqstat, #0x1c00
-+ cmp \irqnr, #16
-+ strcc \irqstat, [\base, #GIC_CPU_EOI]
-+ cmpcs \irqnr, \irqnr
-+ .endm
-+
-+ /* As above, this assumes that irqstat and base are preserved.. */
-+
-+ .macro test_for_ltirq, irqnr, irqstat, base, tmp
-+ bic \irqnr, \irqstat, #0x1c00
-+ mov \tmp, #0
-+ cmp \irqnr, #29
-+ moveq \tmp, #1
-+ streq \irqstat, [\base, #GIC_CPU_EOI]
-+ cmp \tmp, #0
-+ .endm
-+
-+ .macro test_for_cache_ipi, irqnr, irqstat, base, tmp
-+ bic \irqnr, \irqstat, #0x1c00
-+ mov \tmp, #0
-+ cmp \irqnr, #1
-+ moveq \tmp, #1
-+ streq \irqstat, [\base, #GIC_CPU_EOI]
-+ cmp \tmp, #0
-+ .endm
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/gpio.h
-@@ -0,0 +1,94 @@
-+/*
-+ * arch/arm/mach-ixp4xx/include/mach/gpio.h
-+ *
-+ * IXP4XX GPIO wrappers for arch-neutral GPIO calls
-+ *
-+ * Written by Milan Svoboda <msvoboda@ra.rockwell.com>
-+ * Based on PXA implementation by Philipp Zabel <philipp.zabel@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ */
-+
-+#ifndef __ASM_ARCH_IXP4XX_GPIO_H
-+#define __ASM_ARCH_IXP4XX_GPIO_H
-+
-+#include <linux/kernel.h>
-+#include <mach/hardware.h>
-+#include <asm-generic/gpio.h> /* cansleep wrappers */
-+
-+#define NR_BUILTIN_GPIO 64
-+
-+#define CNS3XXX_GPIO_IN 0x0
-+#define CNS3XXX_GPIO_OUT 0x1
-+
-+#define CNS3XXX_GPIO_LO 0
-+#define CNS3XXX_GPIO_HI 1
-+
-+#define CNS3XXX_GPIO_OUTPUT 0x00
-+#define CNS3XXX_GPIO_INPUT 0x04
-+#define CNS3XXX_GPIO_DIR 0x08
-+#define CNS3XXX_GPIO_SET 0x10
-+#define CNS3XXX_GPIO_CLEAR 0x14
-+
-+static inline void gpio_line_get(u8 line, int *value)
-+{
-+ if (line < 32)
-+ *value = ((__raw_readl(CNS3XXX_GPIOA_BASE_VIRT + CNS3XXX_GPIO_INPUT) >> line) & 0x1);
-+ else
-+ *value = ((__raw_readl(CNS3XXX_GPIOB_BASE_VIRT + CNS3XXX_GPIO_INPUT) >> (line - 32)) & 0x1);
-+}
-+
-+static inline void gpio_line_set(u8 line, int value)
-+{
-+ if (line < 32) {
-+ if (value)
-+ __raw_writel((1 << line), CNS3XXX_GPIOA_BASE_VIRT + CNS3XXX_GPIO_SET);
-+ else
-+ __raw_writel((1 << line), CNS3XXX_GPIOA_BASE_VIRT + CNS3XXX_GPIO_CLEAR);
-+ } else {
-+ if (value)
-+ __raw_writel((1 << line), CNS3XXX_GPIOB_BASE_VIRT + CNS3XXX_GPIO_SET);
-+ else
-+ __raw_writel((1 << line), CNS3XXX_GPIOB_BASE_VIRT + CNS3XXX_GPIO_CLEAR);
-+ }
-+}
-+
-+static inline int gpio_get_value(unsigned gpio)
-+{
-+ if (gpio < NR_BUILTIN_GPIO)
-+ {
-+ int value;
-+ gpio_line_get(gpio, &value);
-+ return value;
-+ }
-+ else
-+ return __gpio_get_value(gpio);
-+}
-+
-+static inline void gpio_set_value(unsigned gpio, int value)
-+{
-+ if (gpio < NR_BUILTIN_GPIO)
-+ gpio_line_set(gpio, value);
-+ else
-+ __gpio_set_value(gpio, value);
-+}
-+
-+#define gpio_cansleep __gpio_cansleep
-+
-+extern int gpio_to_irq(int gpio);
-+extern int irq_to_gpio(int gpio);
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/hardware.h
-@@ -0,0 +1,40 @@
-+/*
-+ * arch/arm/mach-cns3xxx/include/mach/hardware.h
-+ *
-+ * This file contains the hardware definitions of the Cavium Networks boards.
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (C) 2003 ARM Limited.
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H
-+#define __ASM_ARCH_HARDWARE_H
-+
-+/* macro to get at IO space when running virtually */
-+#define PCIBIOS_MIN_IO 0x00000000
-+#define PCIBIOS_MIN_MEM 0x00000000
-+
-+#define pcibios_assign_all_busses() 0
-+
-+#include "board.h"
-+
-+#include "platform.h"
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/io.h
-@@ -0,0 +1,41 @@
-+/*
-+ * arch/arm/mach-cns3xxx/include/mach/io.h
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (C) 2003 ARM Limited
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+#ifndef __ASM_ARM_ARCH_IO_H
-+#define __ASM_ARM_ARCH_IO_H
-+
-+#include "board.h"
-+
-+#define IO_SPACE_LIMIT 0xffffffff
-+
-+#if 1
-+static inline void __iomem *__io(unsigned long addr)
-+{
-+ return (void __iomem *)((addr - CNS3XXX_PCIE0_IO_BASE)
-+ + CNS3XXX_PCIE0_IO_BASE_VIRT);
-+}
-+#endif
-+#define __io(a) __io(a)
-+#define __mem_pci(a) (a)
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/irqs.h
-@@ -0,0 +1,45 @@
-+/*
-+ * arch/arm/mach-cns3xxx/include/mach/irqs.h
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (C) 2003 ARM Limited
-+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#ifndef __ASM_ARCH_IRQS_H
-+#define __ASM_ARCH_IRQS_H
-+
-+#include <mach/board.h>
-+
-+#define IRQ_LOCALTIMER 29
-+#define IRQ_LOCALWDOG 30
-+
-+#define IRQ_GIC_START 32
-+#define IRQ_CLCD 44
-+
-+#ifdef CONFIG_CNS_RAID
-+#define IRQ_CNS_RAID (43)
-+#endif /* CONFIG_CNS_RAID */
-+
-+#ifndef NR_IRQS
-+#error "NR_IRQS not defined by the board-specific files"
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/lm.h
-@@ -0,0 +1,32 @@
-+#include <linux/version.h>
-+
-+struct lm_device {
-+ struct device dev;
-+ struct resource resource;
-+ unsigned int irq;
-+ unsigned int id;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ void *lm_drvdata;
-+#endif
-+};
-+
-+struct lm_driver {
-+ struct device_driver drv;
-+ int (*probe)(struct lm_device *);
-+ void (*remove)(struct lm_device *);
-+ int (*suspend)(struct lm_device *, pm_message_t);
-+ int (*resume)(struct lm_device *);
-+};
-+
-+int lm_driver_register(struct lm_driver *drv);
-+void lm_driver_unregister(struct lm_driver *drv);
-+
-+int lm_device_register(struct lm_device *dev);
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+# define lm_get_drvdata(lm) ((lm)->lm_drvdata)
-+# define lm_set_drvdata(lm,d) do { (lm)->lm_drvdata = (d); } while (0)
-+#else
-+# define lm_get_drvdata(lm) dev_get_drvdata(&(lm)->dev)
-+# define lm_set_drvdata(lm,d) dev_set_drvdata(&(lm)->dev, d)
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/memory.h
-@@ -0,0 +1,43 @@
-+/*
-+ * arch/arm/mach-cns3xxx/include/mach/memory.h
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (C) 2003 ARM Limited
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#ifndef __ASM_ARCH_MEMORY_H
-+#define __ASM_ARCH_MEMORY_H
-+
-+/*
-+ * Physical DRAM offset.
-+ */
-+#define PHYS_OFFSET UL(0x00000000)
-+
-+/*
-+ * Virtual view <-> DMA view memory address translations
-+ * virt_to_bus: Used to translate the virtual address to an
-+ * address suitable to be passed to set_dma_addr
-+ * bus_to_virt: Used to convert an address for DMA operations
-+ * to an address that the kernel can use.
-+ */
-+#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
-+#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/misc.h
-@@ -0,0 +1,670 @@
-+/******************************************************************************
-+ * MODULE NAME: star_misc.h
-+ * PROJECT CODE: Vega
-+ * DESCRIPTION:
-+ * MAINTAINER: Jacky Hou
-+ * DATE: 9 February 2009
-+ *
-+ * SOURCE CONTROL:
-+ *
-+ * LICENSE:
-+ * This source code is copyright (c) 2008-2009 Cavium Networks Inc.
-+ * All rights reserved.
-+ *
-+ * REVISION HISTORY:
-+ *
-+ *
-+ * SOURCE:
-+ * ISSUES:
-+ * NOTES TO USERS:
-+ ******************************************************************************/
-+
-+#ifndef _CNS3XXX_MISC_H_
-+#define _CNS3XXX_MISC_H_
-+#include <mach/board.h>
-+#define MISC_MEM_MAP_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT + offset)))
-+
-+
-+/*
-+ * define access macros
-+ */
-+#define MISC_MEMORY_REMAP_REG MISC_MEM_MAP_VALUE(0x00)
-+#define MISC_CHIP_CONFIG_REG MISC_MEM_MAP_VALUE(0x04)
-+#define MISC_DEBUG_PROBE_DATA_REG MISC_MEM_MAP_VALUE(0x08)
-+#define MISC_DEBUG_PROBE_SELECTION_REG MISC_MEM_MAP_VALUE(0x0C)
-+#define MISC_IO_PIN_FUNC_SELECTION_REG MISC_MEM_MAP_VALUE(0x10)
-+#define MISC_GPIOA_PIN_ENABLE_REG MISC_MEM_MAP_VALUE(0x14)
-+#define MISC_GPIOB_PIN_ENABLE_REG MISC_MEM_MAP_VALUE(0x18)
-+#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A MISC_MEM_MAP_VALUE(0x1C)
-+#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B MISC_MEM_MAP_VALUE(0x20)
-+#define MISC_GPIOA_15_0_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x24)
-+#define MISC_GPIOA_16_31_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x28)
-+#define MISC_GPIOB_15_0_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x2C)
-+#define MISC_GPIOB_16_31_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x30)
-+#define MISC_IO_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x34)
-+#define MISC_E_FUSE_31_0_REG MISC_MEM_MAP_VALUE(0x40)
-+#define MISC_E_FUSE_63_32_REG MISC_MEM_MAP_VALUE(0x44)
-+#define MISC_E_FUSE_95_64_REG MISC_MEM_MAP_VALUE(0x48)
-+#define MISC_E_FUSE_127_96_REG MISC_MEM_MAP_VALUE(0x4C)
-+#define MISC_SOFTWARE_TEST_1_REG MISC_MEM_MAP_VALUE(0x50)
-+#define MISC_SOFTWARE_TEST_2_REG MISC_MEM_MAP_VALUE(0x54)
-+
-+
-+
-+// USB MISC
-+#define MISC_USB_CFG_REG MISC_MEM_MAP_VALUE(0x800)
-+#define MISC_USB_STS_REG MISC_MEM_MAP_VALUE(0x804)
-+#define MISC_USBPHY00_CFG_REG MISC_MEM_MAP_VALUE(0x808)
-+#define MISC_USBPHY01_CFG_REG MISC_MEM_MAP_VALUE(0x80c)
-+#define MISC_USBPHY10_CFG_REG MISC_MEM_MAP_VALUE(0x810)
-+#define MISC_USBPHY11_CFG_REG MISC_MEM_MAP_VALUE(0x814)
-+
-+#define MISC_PCIEPHY_CMCTL0_REG MISC_MEM_MAP_VALUE(0x900)
-+#define MISC_PCIEPHY_CMCTL1_REG MISC_MEM_MAP_VALUE(0x904)
-+
-+#define MISC_PCIEPHY0_CTL_REG MISC_MEM_MAP_VALUE(0x940)
-+#define MISC_PCIE0_AXIS_AWMISC_REG MISC_MEM_MAP_VALUE(0x944)
-+#define MISC_PCIE0_AXIS_ARMISC_REG MISC_MEM_MAP_VALUE(0x948)
-+#define MISC_PCIE0_AXIS_RMISC_REG MISC_MEM_MAP_VALUE(0x94C)
-+#define MISC_PCIE0_AXIS_BMISC_REG MISC_MEM_MAP_VALUE(0x950)
-+#define MISC_PCIE0_AXIM_RMISC_REG MISC_MEM_MAP_VALUE(0x954)
-+#define MISC_PCIE0_AXIM_BMISC_REG MISC_MEM_MAP_VALUE(0x958)
-+#define MISC_PCIE0_CTRL_REG MISC_MEM_MAP_VALUE(0x95C)
-+#define MISC_PCIE0_PM_DEBUG_REG MISC_MEM_MAP_VALUE(0x960)
-+#define MISC_PCIE0_RFC_DEBUG_REG MISC_MEM_MAP_VALUE(0x964)
-+#define MISC_PCIE0_CXPL_DEBUGL_REG MISC_MEM_MAP_VALUE(0x968)
-+#define MISC_PCIE0_CXPL_DEBUGH_REG MISC_MEM_MAP_VALUE(0x96C)
-+#define MISC_PCIE0_DIAG_DEBUGH_REG MISC_MEM_MAP_VALUE(0x970)
-+#define MISC_PCIE0_W1CLR_REG MISC_MEM_MAP_VALUE(0x974)
-+#define MISC_PCIE0_INT_MASK_REG MISC_MEM_MAP_VALUE(0x978)
-+#define MISC_PCIE0_INT_STATUS_REG MISC_MEM_MAP_VALUE(0x97C)
-+
-+#define MISC_PCIEPHY1_CTL_REG MISC_MEM_MAP_VALUE(0xa40)
-+#define MISC_PCIE1_AXIS_AWMISC_REG MISC_MEM_MAP_VALUE(0xa44)
-+#define MISC_PCIE1_AXIS_ARMISC_REG MISC_MEM_MAP_VALUE(0xa48)
-+#define MISC_PCIE1_AXIS_RMISC_REG MISC_MEM_MAP_VALUE(0xa4C)
-+#define MISC_PCIE1_AXIS_BMISC_REG MISC_MEM_MAP_VALUE(0xa50)
-+#define MISC_PCIE1_AXIM_RMISC_REG MISC_MEM_MAP_VALUE(0xa54)
-+#define MISC_PCIE1_AXIM_BMISC_REG MISC_MEM_MAP_VALUE(0xa58)
-+#define MISC_PCIE1_CTRL_REG MISC_MEM_MAP_VALUE(0xa5C)
-+#define MISC_PCIE1_PM_DEBUG_REG MISC_MEM_MAP_VALUE(0xa60)
-+#define MISC_PCIE1_RFC_DEBUG_REG MISC_MEM_MAP_VALUE(0xa64)
-+#define MISC_PCIE1_CXPL_DEBUGL_REG MISC_MEM_MAP_VALUE(0xa68)
-+#define MISC_PCIE1_CXPL_DEBUGH_REG MISC_MEM_MAP_VALUE(0xa6C)
-+#define MISC_PCIE1_DIAG_DEBUGH_REG MISC_MEM_MAP_VALUE(0xa70)
-+#define MISC_PCIE1_W1CLR_REG MISC_MEM_MAP_VALUE(0xa74)
-+#define MISC_PCIE1_INT_MASK_REG MISC_MEM_MAP_VALUE(0xa78)
-+#define MISC_PCIE1_INT_STATUS_REG MISC_MEM_MAP_VALUE(0xa7C)
-+
-+
-+
-+
-+
-+
-+/*
-+ * define constants macros
-+ */
-+#define MISC_PARALLEL_FLASH_BOOT (0x0)
-+#define MISC_SPI_SERIAL_FLASH_BOOT (0x1)
-+#define MISC_NAND_FLASH_BOOT (0x2)
-+
-+#define MISC_ALIGN_LITTLE_ENDIAN (0x0)
-+#define MISC_UNALIGN_LITTLE_ENDIAN (0x2)
-+#define MISC_UNALIGN_BIG_ENDIAN (0x3)
-+
-+#define MISC_CPU_CLOCK_333_MHZ (0)
-+#define MISC_CPU_CLOCK_366_MHZ (1)
-+#define MISC_CPU_CLOCK_400_MHZ (2)
-+#define MISC_CPU_CLOCK_433_MHZ (3)
-+#define MISC_CPU_CLOCK_466_MHZ (4)
-+#define MISC_CPU_CLOCK_500_MHZ (5)
-+#define MISC_CPU_CLOCK_533_MHZ (6)
-+#define MISC_CPU_CLOCK_566_MHZ (7)
-+#define MISC_CPU_CLOCK_600_MHZ (8)
-+#define MISC_CPU_CLOCK_633_MHZ (9)
-+#define MISC_CPU_CLOCK_666_MHZ (10)
-+#define MISC_CPU_CLOCK_700_MHZ (11)
-+
-+/*
-+ * Macro-defines for shared pins with GPIO_A
-+ */
-+#if 0
-+#define MISC_LCD_PWR_PIN ((0x1 << 0))
-+#define MISC_CIM_OE_PIN ((0x1 << 1))
-+
-+#define MISC_SMC_PINS ((0x1 << 2) | (0x1 << 3) | (0x1 << 4) | (0x1 << 5)| (0x1 << 6))
-+#define MISC_SMC_CS3_PIN ((0x1 << 2))
-+#define MISC_SMC_CS2_PIN ((0x1 << 3))
-+#define MISC_SMC_CLK_PIN ((0x1 << 4))
-+#define MISC_SMC_ADV_PIN ((0x1 << 5))
-+#define MISC_SMC_CRE_PIN ((0x1 << 6))
-+
-+
-+#define MISC_NFI_PINS ((0x1 << 7) | (0x1 << 8) | (0x1 << 9) | (0x1 << 10)| (0x1 << 11))
-+#define MISC_NFI_BUSY_PIN ((0x1 << 7))
-+#define MISC_NFI_CS3_PIN ((0x1 << 8))
-+#define MISC_NFI_CS2_PIN ((0x1 << 9))
-+#define MISC_NFI_CE1_PIN ((0x1 << 10))
-+#define MISC_NFI_CE0_PIN ((0x1 << 11))
-+
-+#define MISC_EXT_INT2_PIN ((0x1 << 12))
-+#define MISC_EXT_INT1_PIN ((0x1 << 13))
-+#define MISC_EXT_INT0_PIN ((0x1 << 14))
-+
-+
-+#define MISC_UART0_PINS ((0x1 << 15) | (0x1 << 16) | (0x1 << 17) | (0x1 << 18))
-+#define MISC_UART0_RTS_PIN ((0x1 << 15))
-+#define MISC_UART0_CTS_PIN ((0x1 << 16))
-+#define MISC_UART0_TXD_PIN ((0x1 << 17))
-+#define MISC_UART0_RXD_PIN ((0x1 << 18))
-+
-+#define MISC_UART1_PINS ((0x1 << 19) | (0x1 << 20) | (0x1 << 21) | (0x1 << 22))
-+#define MISC_UART1_RTS_PIN ((0x1 << 19))
-+#define MISC_UART1_CTS_PIN ((0x1 << 20))
-+#define MISC_UART1_RXD_PIN ((0x1 << 21))
-+#define MISC_UART1_TXD_PIN ((0x1 << 22))
-+
-+#define MISC_UART2_PINS ((0x1 << 23) | (0x1 << 24))
-+#define MISC_UART2_RXD_PIN ((0x1 << 23))
-+#define MISC_UART2_TXD_PIN ((0x1 << 24))
-+
-+#define MISC_PCM_PINS ((0x1 << 25) | (0x1 << 26) | (0x1 << 27) | (0x1 << 28))
-+#define MISC_PCM_CLK_PIN ((0x1 << 25))
-+#define MISC_PCM_FS_PIN ((0x1 << 26))
-+#define MISC_PCM_DT_PIN ((0x1 << 27))
-+#define MISC_PCM_DR_PIN ((0x1 << 28))
-+
-+#define MISC_SPI_CS1_PIN ((0x1 << 29))
-+#define MISC_SPI_CS0_PIN ((0x1 << 30))
-+#define MISC_SPI_CLK_PIN ((0x1 << 31))
-+#else
-+#define MISC_SD_PWR_ON_PIN ((0x1 << 2))
-+#define MISC_OTG_DRVVBUS_PIN ((0x1 << 3))
-+#define MISC_CIM_OE_PIN ((0x1 << 8))
-+#define MISC_LCD_PWR_PIN ((0x1 << 9))
-+#define MISC_SMC_CS3_PIN ((0x1 << 10))
-+#define MISC_SMC_CS2_PIN ((0x1 << 11))
-+#define MISC_SMC_CLK_PIN ((0x1 << 12))
-+#define MISC_SMC_ADV_PIN ((0x1 << 13))
-+#define MISC_SMC_CRE_PIN ((0x1 << 14))
-+#define MISC_SMC_ADDR_26_PIN ((0x1 << 15))
-+
-+#define MISC_SD_nCD_PIN ((0x1 << 16))
-+#define MISC_SD_nWP_PIN ((0x1 << 17))
-+#define MISC_SD_CLK_PIN ((0x1 << 18))
-+#define MISC_SD_CMD_PIN ((0x1 << 19))
-+#define MISC_SD_DT7_PIN ((0x1 << 20))
-+#define MISC_SD_DT6_PIN ((0x1 << 21))
-+#define MISC_SD_DT5_PIN ((0x1 << 22))
-+#define MISC_SD_DT4_PIN ((0x1 << 23))
-+#define MISC_SD_DT3_PIN ((0x1 << 24))
-+#define MISC_SD_DT2_PIN ((0x1 << 25))
-+#define MISC_SD_DT1_PIN ((0x1 << 26))
-+#define MISC_SD_DT0_PIN ((0x1 << 27))
-+#define MISC_SD_LED_PIN ((0x1 << 28))
-+
-+#define MISC_UR_RXD1_PIN ((0x1 << 29))
-+#define MISC_UR_TXD1_PIN ((0x1 << 30))
-+#define MISC_UR_RTS2_PIN ((0x1 << 31))
-+
-+#endif
-+
-+
-+/*
-+ * Macro-defines for shared pins with GPIO_B
-+ */
-+#if 0
-+#define MISC_SPI_DT_PIN ((0x1 << 0))
-+#define MISC_SPI_DR_PIN ((0x1 << 1))
-+
-+#define MISC_SD_CD_PIN ((0x1 << 2))
-+#define MISC_SD_WP_PIN ((0x1 << 3))
-+#define MISC_SD_CLK_PIN ((0x1 << 4))
-+#define MISC_SD_CMD_PIN ((0x1 << 5))
-+#define MISC_SD_DT7_PIN ((0x1 << 6))
-+#define MISC_SD_DT6_PIN ((0x1 << 7))
-+#define MISC_SD_DT5_PIN ((0x1 << 8))
-+#define MISC_SD_DT4_PIN ((0x1 << 9))
-+#define MISC_SD_DT3_PIN ((0x1 << 10))
-+#define MISC_SD_DT2_PIN ((0x1 << 11))
-+#define MISC_SD_DT1_PIN ((0x1 << 12))
-+#define MISC_SD_DT0_PIN ((0x1 << 13))
-+#define MISC_SD_LED_PIN ((0x1 << 14))
-+
-+
-+#define MISC_I2S_CLK_PIN ((0x1 << 15))
-+#define MISC_I2S_FS_PIN ((0x1 << 16))
-+#define MISC_I2S_DT_PIN ((0x1 << 17))
-+#define MISC_I2S_DR_PIN ((0x1 << 18))
-+
-+//Tim.Liao modify
-+#define MISC_I2C_SCL_PIN ((0x1 << 19))
-+#define MISC_I2C_SDA_PIN ((0x1 << 20))
-+
-+#define MISC_GSW_P2_CRS_PIN ((0x1 << 21))
-+#define MISC_GSW_P2_COL_PIN ((0x1 << 22))
-+#define MISC_GSW_P1_CRS_PIN ((0x1 << 23))
-+#define MISC_GSW_P1_COL_PIN ((0x1 << 24))
-+#define MISC_GSW_P0_CRS_PIN ((0x1 << 25))
-+#define MISC_GSW_P0_COL_PIN ((0x1 << 26))
-+
-+#define MISC_GSW_MDC_PIN ((0x1 << 27))
-+#define MISC_GSW_MDIO_PIN ((0x1 << 28))
-+
-+#define MISC_CLOCK_OUTPUT_PIN ((0x1 << 29))
-+
-+#define MISC_SATA_LED1_PIN ((0x1 << 30))
-+#define MISC_SATA_LED0_PIN ((0x1 << 31))
-+#else
-+#define MISC_UR_CTS2_PIN ((0x1 << 0))
-+#define MISC_UR_RXD2_PIN ((0x1 << 1))
-+#define MISC_UR_TXD2_PIN ((0x1 << 2))
-+#define MISC_PCMCLK_PIN ((0x1 << 3))
-+#define MISC_PCMFS_PIN ((0x1 << 4))
-+#define MISC_PCMDT_PIN ((0x1 << 5))
-+#define MISC_PCMDR_PIN ((0x1 << 6))
-+#define MISC_PCM_PINS (MISC_PCMCLK_PIN|MISC_PCMFS_PIN|MISC_PCMDT_PIN|MISC_PCMDR_PIN)
-+
-+#define MISC_SPInCS1_PIN ((0x1 << 7))
-+#define MISC_SPInCS0_PIN ((0x1 << 8))
-+#define MISC_SPICLK_PIN ((0x1 << 9))
-+#define MISC_SPIDT_PIN ((0x1 << 10))
-+#define MISC_SPIDR_PIN ((0x1 << 11))
-+
-+#define MISC_I2C_SCL_PIN ((0x1 << 12))
-+#define MISC_I2C_SDA_PIN ((0x1 << 13))
-+
-+#define MISC_GSW_P2_CRS_PIN ((0x1 << 14))
-+#define MISC_GSW_P2_COL_PIN ((0x1 << 15))
-+#define MISC_GSW_P1_CRS_PIN ((0x1 << 16))
-+#define MISC_GSW_P1_COL_PIN ((0x1 << 17))
-+#define MISC_GSW_P0_CRS_PIN ((0x1 << 18))
-+#define MISC_GSW_P0_COL_PIN ((0x1 << 19))
-+
-+#define MISC_GSW_MDC_PIN ((0x1 << 20))
-+#define MISC_GSW_MDIO_PIN ((0x1 << 21))
-+
-+#define MISC_I2S_CLK_PIN (0x1 << 22)
-+#define MISC_I2S_FS_PIN (0x1 << 23)
-+#define MISC_I2S_DT_PIN (0x1 << 24)
-+#define MISC_I2S_DR_PIN (0x1 << 25)
-+
-+#define MISC_CLOCK_OUTPUT_PIN ((0x1 << 26))
-+
-+#define MISC_EXT_INT2_PIN ((0x1 << 27))
-+#define MISC_EXT_INT1_PIN ((0x1 << 28))
-+#define MISC_EXT_INT0_PIN ((0x1 << 29))
-+
-+#define MISC_SATA_LED1_PIN ((0x1 << 30))
-+#define MISC_SATA_LED0_PIN ((0x1 << 31))
-+
-+#define MISC_CLOCK_OUTPUT_PIN ((0x1 << 26))
-+
-+#define MISC_EXT_INT2_PIN ((0x1 << 27))
-+#define MISC_EXT_INT1_PIN ((0x1 << 28))
-+#define MISC_EXT_INT0_PIN ((0x1 << 29))
-+
-+#define MISC_SATA_LED1_PIN ((0x1 << 30))
-+#define MISC_SATA_LED0_PIN ((0x1 << 31))
-+
-+#define MISC_CLOCK_OUTPUT_PIN ((0x1 << 26))
-+
-+#define MISC_EXT_INT2_PIN ((0x1 << 27))
-+#define MISC_EXT_INT1_PIN ((0x1 << 28))
-+#define MISC_EXT_INT0_PIN ((0x1 << 29))
-+
-+#define MISC_SATA_LED1_PIN ((0x1 << 30))
-+#define MISC_SATA_LED0_PIN ((0x1 << 31))
-+
-+#define MISC_CLOCK_OUTPUT_PIN ((0x1 << 26))
-+
-+#define MISC_EXT_INT2_PIN ((0x1 << 27))
-+#define MISC_EXT_INT1_PIN ((0x1 << 28))
-+#define MISC_EXT_INT0_PIN ((0x1 << 29))
-+
-+#define MISC_SATA_LED1_PIN ((0x1 << 30))
-+#define MISC_SATA_LED0_PIN ((0x1 << 31))
-+
-+#define MISC_CLOCK_OUTPUT_PIN ((0x1 << 26))
-+
-+#define MISC_EXT_INT2_PIN ((0x1 << 27))
-+#define MISC_EXT_INT1_PIN ((0x1 << 28))
-+#define MISC_EXT_INT0_PIN ((0x1 << 29))
-+
-+#define MISC_SATA_LED1_PIN ((0x1 << 30))
-+#define MISC_SATA_LED0_PIN ((0x1 << 31))
-+
-+#define MISC_CLOCK_OUTPUT_PIN ((0x1 << 26))
-+
-+#define MISC_EXT_INT2_PIN ((0x1 << 27))
-+#define MISC_EXT_INT1_PIN ((0x1 << 28))
-+#define MISC_EXT_INT0_PIN ((0x1 << 29))
-+
-+#define MISC_SATA_LED1_PIN ((0x1 << 30))
-+#define MISC_SATA_LED0_PIN ((0x1 << 31))
-+
-+#define MISC_CLOCK_OUTPUT_PIN ((0x1 << 26))
-+
-+#define MISC_EXT_INT2_PIN ((0x1 << 27))
-+#define MISC_EXT_INT1_PIN ((0x1 << 28))
-+#define MISC_EXT_INT0_PIN ((0x1 << 29))
-+
-+#define MISC_SATA_LED1_PIN ((0x1 << 30))
-+#define MISC_SATA_LED0_PIN ((0x1 << 31))
-+
-+#endif
-+/*
-+ * Other defines
-+ */
-+#define MISC_GPIOA_PIN_0 (0)
-+#define MISC_GPIOA_PIN_1 (1)
-+#define MISC_GPIOA_PIN_2 (2)
-+#define MISC_GPIOA_PIN_3 (3)
-+#define MISC_GPIOA_PIN_4 (4)
-+#define MISC_GPIOA_PIN_5 (5)
-+#define MISC_GPIOA_PIN_6 (6)
-+#define MISC_GPIOA_PIN_7 (7)
-+#define MISC_GPIOA_PIN_8 (8)
-+#define MISC_GPIOA_PIN_9 (9)
-+#define MISC_GPIOA_PIN_10 (10)
-+#define MISC_GPIOA_PIN_11 (11)
-+#define MISC_GPIOA_PIN_12 (12)
-+#define MISC_GPIOA_PIN_13 (13)
-+#define MISC_GPIOA_PIN_14 (14)
-+#define MISC_GPIOA_PIN_15 (15)
-+
-+
-+#define MISC_GPIOA_RESISTOR_PULL_DOWN (1)
-+#define MISC_GPIOA_RESISTOR_PULL_UP (1)
-+
-+
-+
-+/*
-+ * function declarations
-+ */
-+
-+
-+/*
-+ * macro declarations
-+ */
-+#define HAL_MISC_GET_SYSTEM_ALIGN_ENDIAN_MODE(mode) \
-+{ \
-+ (mode) = (MISC_CHIP_CONFIG_REG) & 0x3; \
-+}
-+
-+
-+#define HAL_MISC_GET_SYSTEM_CPU_CLOCK(cpu_clock) \
-+{ \
-+ (cpu_clock) = (MISC_CHIP_CONFIG_REG >> 5) & 0xF; \
-+}
-+
-+
-+#define HAL_MISC_ENABLE_SPI_SERIAL_FLASH_BANK_ACCESS() \
-+{ \
-+ (MISC_CHIP_CONFIG_REG) |= (0x1 << 16); \
-+}
-+
-+#define HAL_MISC_DISABLE_SPI_SERIAL_FLASH_BANK_ACCESS() \
-+{ \
-+ (MISC_CHIP_CONFIG_REG) &= ~(0x1 << 16); \
-+}
-+
-+
-+/*
-+ * Macro defines for GPIOA and GPIOB Pin Enable Register
-+ */
-+#define HAL_MISC_ENABLE_EXT_INT0_PIN() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) |= (MISC_EXT_INT0_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_EXT_INT1_PIN() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) &= ~(MISC_EXT_INT1_PIN); \
-+}
-+
-+#define HAL_MISC_ENABLE_EXT_INT2_PIN() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) |= (MISC_EXT_INT2_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_EXT_INT2_PIN() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) &= ~(MISC_EXT_INT2_PIN); \
-+}
-+
-+#define HAL_MISC_ENABLE_EXT_INT1_PIN() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) |= (MISC_EXT_INT1_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_EXT_INT0_PIN() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) &= ~(MISC_EXT_INT0_PIN); \
-+}
-+
-+
-+#define HAL_MISC_ENABLE_PCM_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) |= (MISC_PCM_PINS); \
-+}
-+
-+#define HAL_MISC_DISABLE_PCM_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) &= ~(MISC_PCM_PINS); \
-+}
-+
-+
-+#define HAL_MISC_ENABLE_CIM_OE_PIN() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) |= (MISC_CIM_OE_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_CIM_OE_PIN() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) &= ~(MISC_CIM_OE_PIN); \
-+}
-+
-+
-+#define HAL_MISC_ENABLE_LCD_PWR_PIN() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) |= (MISC_LCD_PWR_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_LCD_PWR_PIN() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) &= ~(MISC_LCD_PWR_PIN); \
-+}
-+
-+
-+#define HAL_MISC_ENABLE_NFI_PINS() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) |= (MISC_NFI_PINS); \
-+}
-+
-+#define HAL_MISC_DISABLE_NFI_PINS() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) &= ~(MISC_NFI_PINS); \
-+}
-+
-+
-+
-+#define HAL_MISC_ENABLE_SMC_PINS() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) |= (MISC_SMC_PINS); \
-+}
-+
-+#define HAL_MISC_DISABLE_SMC_PINS() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) &= ~(MISC_SMC_PINS); \
-+}
-+
-+#define HAL_MISC_ENABLE_UART0_PINS() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) |= (MISC_UART0_PINS); \
-+}
-+
-+#define HAL_MISC_DISABLE_UART0_PINS() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) &= ~(MISC_UART0_PINS); \
-+}
-+
-+#define HAL_MISC_ENABLE_UART1_PINS() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) |= (MISC_UART1_PINS); \
-+}
-+
-+#define HAL_MISC_DISABLE_UART1_PINS() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) &= ~(MISC_UART1_PINS); \
-+}
-+
-+#define HAL_MISC_ENABLE_UART2_PINS() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) |= (MISC_UART2_PINS); \
-+}
-+
-+#define HAL_MISC_DISABLE_UART2_PINS() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) &= ~(MISC_UART2_PINS); \
-+}
-+
-+
-+
-+
-+
-+/*
-+ * Macro-defines for GPIO_B
-+ */
-+#define HAL_MISC_ENABLE_SPI_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) |= \
-+ (MISC_SPInCS1_PIN | MISC_SPInCS0_PIN | \
-+ MISC_SPICLK_PIN | MISC_SPIDT_PIN | MISC_SPIDR_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_SPI_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) &= \
-+ ~(MISC_SPInCS1_PIN | MISC_SPInCS0_PIN | \
-+ MISC_SPICLK_PIN | MISC_SPIDT_PIN | MISC_SPIDR_PIN); \
-+}
-+
-+#define HAL_MISC_ENABLE_SD_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) |= (MISC_SD_CD_PIN | MISC_SD_WP_PIN | MISC_SD_CLK_PIN |MISC_SD_CMD_PIN |MISC_SD_DT7_PIN|MISC_SD_DT6_PIN | \
-+ MISC_SD_DT5_PIN | MISC_SD_DT4_PIN |MISC_SD_DT3_PIN | MISC_SD_DT2_PIN| MISC_SD_DT1_PIN | MISC_SD_DT0_PIN | MISC_SD_LED_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_SD_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) &= ~(MISC_SD_CD_PIN | MISC_SD_WP_PIN | MISC_SD_CLK_PIN |MISC_SD_CMD_PIN |MISC_SD_DT7_PIN|MISC_SD_DT6_PIN |\
-+ MISC_SD_DT5_PIN | MISC_SD_DT4_PIN |MISC_SD_DT3_PIN | MISC_SD_DT2_PIN| MISC_SD_DT1_PIN | MISC_SD_DT0_PIN | MISC_SD_LED_PIN); \
-+}
-+
-+
-+#define HAL_MISC_ENABLE_I2S_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) |= (MISC_I2S_CLK_PIN | MISC_I2S_FS_PIN | MISC_I2S_DT_PIN |MISC_I2S_DR_PIN |MISC_I2S_DR_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_I2S_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) &= ~(MISC_I2S_CLK_PIN | MISC_I2S_FS_PIN | MISC_I2S_DT_PIN |MISC_I2S_DR_PIN |MISC_I2S_DR_PIN); \
-+}
-+
-+//Tim.Liao modify I2C pin
-+#define HAL_MISC_ENABLE_I2C_PINS() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) |= (MISC_I2C_SCL_PIN | MISC_I2C_SDA_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_I2C_PINS() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) &= ~(MISC_I2C_SCL_PIN | MISC_I2C_SDA_PIN); \
-+}
-+
-+#define HAL_MISC_ENABLE_GSW_P2_CRS_COL_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) |= (MISC_GSW_P2_CRS_PIN | MISC_GSW_P2_COL_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_GSW_P2_CRS_COL_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) &= ~(MISC_GSW_P2_CRS_PIN | MISC_GSW_P2_COL_PIN); \
-+}
-+
-+
-+#define HAL_MISC_ENABLE_GSW_P1_CRS_COL_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) |= (MISC_GSW_P1_CRS_PIN | MISC_GSW_P1_COL_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_GSW_P1_CRS_COL_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) &= ~(MISC_GSW_P1_CRS_PIN | MISC_GSW_P1_COL_PIN); \
-+}
-+
-+
-+
-+#define HAL_MISC_ENABLE_GSW_P0_CRS_COL_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) |= (MISC_GSW_P0_CRS_PIN | MISC_GSW_P0_COL_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_GSW_P0_CRS_COL_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) &= ~(MISC_GSW_P0_CRS_PIN | MISC_GSW_P0_COL_PIN); \
-+}
-+
-+
-+#define HAL_MISC_ENABLE_MDC_MDIO_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) |= (MISC_GSW_MDC_PIN | MISC_GSW_MDIO_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_MDC_MDIO_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) &= ~(MISC_GSW_MDC_PIN | MISC_GSW_MDIO_PIN); \
-+}
-+
-+
-+
-+#define HAL_MISC_ENABLE_SATA_LED_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) |= (MISC_SATA_LED1_PIN | MISC_SATA_LED0_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_SATA_LED_PINS() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) &= ~(MISC_SATA_LED1_PIN | MISC_SATA_LED0_PIN); \
-+}
-+
-+
-+
-+#define HAL_MISC_ENABLE_CLOCK_OUTPUT_PIN() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) |= (MISC_CLOCK_OUTPUT_PIN); \
-+}
-+
-+#define HAL_MISC_DISABLE_CLOCK_OUTPUT_PIN() \
-+{ \
-+ (MISC_GPIOB_PIN_ENABLE_REG) &= ~(MISC_CLOCK_OUTPUT_PIN); \
-+}
-+
-+
-+#define HAL_MISC_ENABLE_ALL_SHARED_GPIO_PINS() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) = (0x0); \
-+ (MISC_GPIOB_PIN_ENABLE_REG) = (0x0); \
-+}
-+
-+#define HAL_MISC_DISABLE_ALL_SHARED_GPIO_PINS() \
-+{ \
-+ (MISC_GPIOA_PIN_ENABLE_REG) = (0xFFFFFFFF); \
-+ (MISC_GPIOB_PIN_ENABLE_REG) = (0xFFFFFFFF); \
-+}
-+
-+
-+
-+#endif // end of #ifndef _STAR_MISC_H_
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/pcie.h
-@@ -0,0 +1,149 @@
-+/*******************************************************************************
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ *
-+ ******************************************************************************/
-+
-+#ifndef _CNS3XXX_PCIE_H_
-+#define _CNS3XXX_PCIE_H_
-+
-+#include "mach/board.h"
-+
-+#define PCIE0_IO_SPACE_START (CNS3XXX_PCIE0_IO_BASE)
-+#define PCIE0_IO_SPACE_SIZE 0x01000000 /* 16MB */
-+#define PCIE0_IO_SPACE_END (CNS3XXX_PCIE0_IO_BASE + PCIE0_IO_SPACE_SIZE - 1)
-+
-+#define PCIE0_MEM_SPACE_START (CNS3XXX_PCIE0_MEM_BASE)
-+#define PCIE0_MEM_SPACE_SIZE 0x01000000 /* 176MB */
-+#define PCIE0_MEM_SPACE_END (CNS3XXX_PCIE0_MEM_BASE + PCIE0_MEM_SPACE_SIZE - 1)
-+
-+#define PCIE1_IO_SPACE_START (CNS3XXX_PCIE1_IO_BASE)
-+#define PCIE1_IO_SPACE_SIZE 0x01000000 /* 16MB */
-+#define PCIE1_IO_SPACE_END (CNS3XXX_PCIE1_IO_BASE + PCIE1_IO_SPACE_SIZE - 1)
-+
-+#define PCIE1_MEM_SPACE_START (CNS3XXX_PCIE1_MEM_BASE)
-+#define PCIE1_MEM_SPACE_SIZE 0x01000000 /* 16MB */
-+#define PCIE1_MEM_SPACE_END (CNS3XXX_PCIE1_MEM_BASE + PCIE1_MEM_SPACE_SIZE - 1)
-+
-+#define PCIB_MEM_MAP_VALUE(base, reg_offset) (*((u32 volatile *)(SYSVA_PCI_BRIDGE_##base##_ADDR + reg_offset)))
-+
-+/*
-+ * define access macros
-+ */
-+#define PCI_BRIDGE_CONFIG_DATA PCIB_MEM_MAP_VALUE(CONFIG_DATA_BASE, 0x2C)
-+#define PCI_BRIDGE_CONFIG_ADDR PCIB_MEM_MAP_VALUE(CONFIG_ADDR_BASE, 0x28)
-+
-+#define PCI_BRIDGE_CONFIG_DATA_REG_OFFSET 0x2C
-+#define PCI_BRIDGE_CONFIG_ADDR_REG_OFFSET 0x28
-+
-+
-+/* PCIe MISC 0 Register */
-+#define CNS3XXX_PCIEPHY0_CMCTL0 (CNS3XXX_MISC_BASE_VIRT + 0x900)
-+#define CNS3XXX_PCIEPHY0_CMCTL1 (CNS3XXX_MISC_BASE_VIRT + 0x904)
-+#define CNS3XXX_PCIEPHY0_CTL1 (CNS3XXX_MISC_BASE_VIRT + 0x940)
-+#define CNS3XXX_PCIE0_AXIS_AWMISC (CNS3XXX_MISC_BASE_VIRT + 0x944)
-+#define CNS3XXX_PCIE0_AXIS_ARMISC (CNS3XXX_MISC_BASE_VIRT + 0x948)
-+#define CNS3XXX_PCIE0_AXIS_RMISC (CNS3XXX_MISC_BASE_VIRT + 0x94C)
-+#define CNS3XXX_PCIE0_AXIS_BMISC (CNS3XXX_MISC_BASE_VIRT + 0x950)
-+#define CNS3XXX_PCIE0_AXIM_RMISC (CNS3XXX_MISC_BASE_VIRT + 0x954)
-+#define CNS3XXX_PCIE0_AXIM_BMISC (CNS3XXX_MISC_BASE_VIRT + 0x958)
-+#define CNS3XXX_PCIE0_CTRL (CNS3XXX_MISC_BASE_VIRT + 0x95C)
-+#define CNS3XXX_PCIE0_PM_DEBUG (CNS3XXX_MISC_BASE_VIRT + 0x960)
-+#define CNS3XXX_PCIE0_RFC_DEBUG (CNS3XXX_MISC_BASE_VIRT + 0x964)
-+#define CNS3XXX_PCIE0_CXPL_DEBUGL (CNS3XXX_MISC_BASE_VIRT + 0x968)
-+#define CNS3XXX_PCIE0_CXPL_DEBUGH (CNS3XXX_MISC_BASE_VIRT + 0x96C)
-+#define CNS3XXX_PCIE0_DIAG (CNS3XXX_MISC_BASE_VIRT + 0x970)
-+#define CNS3XXX_PCIE0_INT_STATUS (CNS3XXX_MISC_BASE_VIRT + 0x974)
-+#define CNS3XXX_PCIE0_INT_MASK (CNS3XXX_MISC_BASE_VIRT + 0x978)
-+
-+
-+/* PCIe MISC 1 Register */
-+#define CNS3XXX_PCIEPHY1_CMCTL0 (CNS3XXX_MISC_BASE_VIRT + 0xA00)
-+#define CNS3XXX_PCIEPHY1_CMCTL1 (CNS3XXX_MISC_BASE_VIRT + 0xA04)
-+#define CNS3XXX_PCIEPHY1_CTL1 (CNS3XXX_MISC_BASE_VIRT + 0xA40)
-+#define CNS3XXX_PCIE1_AXIS_AWMISC (CNS3XXX_MISC_BASE_VIRT + 0xA44)
-+#define CNS3XXX_PCIE1_AXIS_ARMISC (CNS3XXX_MISC_BASE_VIRT + 0xA48)
-+#define CNS3XXX_PCIE1_AXIS_RMISC (CNS3XXX_MISC_BASE_VIRT + 0xA4C)
-+#define CNS3XXX_PCIE1_AXIS_BMISC (CNS3XXX_MISC_BASE_VIRT + 0xA50)
-+#define CNS3XXX_PCIE1_AXIM_RMISC (CNS3XXX_MISC_BASE_VIRT + 0xA54)
-+#define CNS3XXX_PCIE1_AXIM_BMISC (CNS3XXX_MISC_BASE_VIRT + 0x958)
-+#define CNS3XXX_PCIE1_CTRL (CNS3XXX_MISC_BASE_VIRT + 0xA5C)
-+#define CNS3XXX_PCIE1_PM_DEBUG (CNS3XXX_MISC_BASE_VIRT + 0xA60)
-+#define CNS3XXX_PCIE1_RFC_DEBUG (CNS3XXX_MISC_BASE_VIRT + 0xA64)
-+#define CNS3XXX_PCIE1_CXPL_DEBUGL (CNS3XXX_MISC_BASE_VIRT + 0xA68)
-+#define CNS3XXX_PCIE1_CXPL_DEBUGH (CNS3XXX_MISC_BASE_VIRT + 0xA6C)
-+#define CNS3XXX_PCIE1_DIAG (CNS3XXX_MISC_BASE_VIRT + 0xA70)
-+#define CNS3XXX_PCIE1_INT_STATUS (CNS3XXX_MISC_BASE_VIRT + 0xA74)
-+#define CNS3XXX_PCIE1_INT_MASK (CNS3XXX_MISC_BASE_VIRT + 0xA78)
-+
-+
-+/*
-+ * define constants macros
-+ */
-+
-+#define PCIB_DEVICE_ID 0x3400
-+#define PCIB_VENDOR_ID 0x177D
-+#define PCIB_CLASS_CODE 0xFF0000
-+#define PCIB_REVISION_ID 0x00
-+#define PCIB_BAR0_MEMORY_SPACE_BASE 0x20000000
-+#define PCIB_BAR1_IO_SPACE_BASE 0x20000000
-+#define PCI_MEMORY_SPACE_BASE 0xB0000000
-+#define PCI_IO_SPACE_BASE 0xA8000000
-+#define PCI_MAX_BUS_NUM 0x01
-+#define PCI_MAX_DEVICE_NUM 0x14
-+#define PCI_MAX_FUNCTION_NUM 0x01
-+#define PCI_MAX_REG_NUM 0x3C
-+
-+#define PCI_MAX_DEVICE_TYPE_NUM 0x13
-+#define PCI_MAX_BAR_NUM 0x06
-+
-+#define PCI_CSH_VENDOR_ID_REG_ADDR 0x00
-+#define PCI_CSH_DEVICE_ID_REG_ADDR 0x02
-+#define PCI_CSH_COMMAND_REG_ADDR 0x04
-+#define PCI_CSH_STATUS_REG_ADDR 0x06
-+#define PCI_CSH_REVISION_CLASS_REG_ADDR 0x08
-+#define PCI_CSH_CACHE_LINE_SIZE_REG_ADDR 0x0C
-+#define PCI_CSH_LATENCY_TIMER_REG_ADDR 0x0D
-+#define PCI_CSH_HEADER_TYPE_REG_ADDR 0x0E
-+#define PCI_CSH_BIST_REG_ADDR 0x0F
-+#define PCI_CSH_BAR_REG_ADDR 0x10
-+
-+
-+#define PCI_IO_SPACE_SIZE_1M 0x00
-+#define PCI_IO_SPACE_SIZE_2M 0x01
-+#define PCI_IO_SPACE_SIZE_4M 0x02
-+#define PCI_IO_SPACE_SIZE_8M 0x03
-+#define PCI_IO_SPACE_SIZE_16M 0x04
-+#define PCI_IO_SPACE_SIZE_32M 0x05
-+#define PCI_IO_SPACE_SIZE_64M 0x06
-+#define PCI_IO_SPACE_SIZE_128M 0x07
-+#define PCI_IO_SPACE_SIZE_256M 0x08
-+#define PCI_IO_SPACE_SIZE_512M 0x09
-+#define PCI_IO_SPACE_SIZE_1G 0x0A
-+#define PCI_IO_SPACE_SIZE_2G 0x0B
-+
-+
-+struct pcie_dbgfs_reg{
-+ char *name;
-+ u32 *addr;
-+};
-+
-+#endif /* end of #ifndef _STAR_PCIE_H_ */
-+
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/pcm.h
-@@ -0,0 +1,277 @@
-+/******************************************************************************
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ *
-+ ******************************************************************************/
-+
-+#ifndef _STAR_PCM_H_
-+#define _STAR_PCM_H_
-+
-+/******************************************************************************
-+ * MODULE NAME: star_pcm.h
-+ * PROJECT CODE: Orion
-+ * DESCRIPTION:
-+ * MAINTAINER: MJLIU
-+ * DATE: 15 September 2005
-+ *
-+ * SOURCE CONTROL:
-+ *
-+ * LICENSE:
-+ * This source code is copyright (c) 2005 Star Semi Inc.
-+ * All rights reserved.
-+ *
-+ * REVISION HISTORY:
-+ * 15 September 2005 - MJLIU - Initial Version v1.0
-+ *
-+ *
-+ * SOURCE:
-+ * ISSUES:
-+ * NOTES TO USERS:
-+ ******************************************************************************/
-+
-+//#include <asm/arch/star_sys_memory_map.h>
-+
-+#define PCM_BASE_ADDR (CNS3XXX_SSP_BASE_VIRT)
-+#define PCM_MEM_MAP_ADDR(reg_offset) (PCM_BASE_ADDR + reg_offset)
-+#define PCM_MEM_MAP_VALUE(reg_offset) (*((u32 volatile *)PCM_MEM_MAP_ADDR(reg_offset)))
-+
-+
-+/*
-+ * define access macros
-+ */
-+#define PCM_CONFIGURATION_0_REG PCM_MEM_MAP_VALUE(0x80)
-+#define PCM_CONFIGURATION_1_REG PCM_MEM_MAP_VALUE(0x84)
-+
-+#define PCM_CHANNEL_0_CONFIG_REG PCM_MEM_MAP_VALUE(0x88)
-+#define PCM_CHANNEL_1_CONFIG_REG PCM_MEM_MAP_VALUE(0x8C)
-+#define PCM_CHANNEL_2_CONFIG_REG PCM_MEM_MAP_VALUE(0x90)
-+#define PCM_CHANNEL_3_CONFIG_REG PCM_MEM_MAP_VALUE(0x94)
-+
-+#define PCM_TX_DATA_31_0_REG PCM_MEM_MAP_VALUE(0x98)
-+#define PCM_TX_DATA_63_32_REG PCM_MEM_MAP_VALUE(0x9C)
-+
-+#define PCM_RX_DATA_31_0_REG PCM_MEM_MAP_VALUE(0xA0)
-+#define PCM_RX_DATA_63_32_REG PCM_MEM_MAP_VALUE(0xA4)
-+
-+#define PCM_INTERRUPT_STATUS_REG PCM_MEM_MAP_VALUE(0xA8)
-+#define PCM_INTERRUPT_ENABLE_REG PCM_MEM_MAP_VALUE(0xAC)
-+
-+
-+
-+/*
-+ * define constants macros
-+ */
-+#define CH0_BIT_INDEX (0x1)
-+#define CH1_BIT_INDEX (0x2)
-+#define CH2_BIT_INDEX (0x4)
-+#define CH3_BIT_INDEX (0x8)
-+
-+#define PCM_RXBUF_FULL_FG (0x1)
-+#define PCM_TXBUF_EMPTY_FG (0x2)
-+#define PCM_RXBUF_OVERRUN_FG (0x4)
-+#define PCM_TXBUF_UNDERRUN_FG (0x8)
-+
-+#define PCM_ENABLE_FG (0x1 << 23)
-+
-+#define PCM_IDL_MODE (0)
-+#define PCM_GCI_MODE (1)
-+
-+#define PCM_DATA_BIT_8 (0)
-+#define PCM_DATA_BIT_16 (1)
-+
-+
-+/*
-+ * Set Commands Variables
-+ */
-+#define Software_Reset (0x02)
-+#define Hardware_Reset (0x04)
-+#define Write_Transmit_Time_Slot (0x40)
-+#define Read_Transmit_Time_Slot (0x41)
-+#define Write_Receive_Time_Slot (0x42)
-+#define Read_Receive_Time_Slot (0x43)
-+#define Write_Tx_Rx_CLK_Slot_Tx_CLK_Edge (0x44)
-+#define Read_Tx_Rx_CLK_Slot_Tx_CLK_Edge (0x45)
-+#define Write_Device_Configure_Reg (0x46)
-+#define Read_Device_Configure_Reg (0x47)
-+#define Write_Channel_Enable_Operating_Mode_Reg (0x4A)
-+#define Read_Channel_Enable_Operating_Mode_Reg (0x4B)
-+#define Read_Signal_Reg (0x4D)
-+#define Input_Data_Reg (0x52)
-+#define Output_Data_Reg (0x53)
-+#define Input_Direction_Reg (0x54)
-+#define Output_Direction_Reg (0x55)
-+#define Write_System_State (0x56)
-+#define Read_System_State (0x57)
-+#define Write_Operating_Functon (0x60)
-+#define Read_Operating_Functon (0x61)
-+#define Write_System_State_Config (0x68)
-+#define Read_System_State_Config (0x69)
-+#define Write_Interrupt_Mask_Reg (0x6C)
-+#define Read_Interrupt_Mask_Reg (0x6D)
-+#define Write_Operating_Condition (0x70)
-+#define Write_Loop_Supervision_Parameter (0xC2)
-+#define Write_DC_Feed_Parameter (0xC6)
-+#define Write_Signal_A_B_Parameter (0xD2)
-+#define Write_Switching_Reg_Parameter (0xE4)
-+#define Write_Switching_Reg_Control (0xE6)
-+
-+
-+/*
-+ * define data structure
-+ */
-+typedef struct _PCM_CHANNEL_OBJECT_ PCM_CHANNEL_OBJECT_T;
-+
-+struct _PCM_CHANNEL_OBJECT_
-+{
-+ u16 channel_0_tx_data;
-+ u16 channel_0_rx_data;
-+ u32 channel_0_data_width; /* 0 : 8-bit, 1 : 16-bit */
-+
-+ u16 channel_1_tx_data;
-+ u16 channel_1_rx_data;
-+ u32 channel_1_data_width;
-+
-+ u16 channel_2_tx_data;
-+ u16 channel_2_rx_data;
-+ u32 channel_2_data_width;
-+
-+ u16 channel_3_tx_data;
-+ u16 channel_3_rx_data;
-+ u32 channel_3_data_width;
-+
-+ u32 channel_enable_config; /* bit[0] = 0 : channel 0 disabled
-+ [0] = 1 : channel 0 enabled
-+ bit[1] = 0 : channel 1 disabled
-+ [1] = 1 : channel 1 enabled
-+ bit[2] = 0 : channel 2 disabled
-+ [2] = 1 : channel 2 enabled
-+ bit[3] = 0 : channel 3 disabled
-+ [3] = 1 : channel 3 enabled */
-+};
-+
-+
-+typedef struct _PCM_OBJECT_ PCM_OBJECT_T;
-+
-+struct _PCM_OBJECT_
-+{
-+ u32 config_0;
-+ u32 config_1;
-+
-+ u32 channel_0_config;
-+ u32 channel_1_config;
-+ u32 channel_2_config;
-+ u32 channel_3_config;
-+
-+ u32 interrupt_config;
-+
-+ /*
-+ * For interrupt setting
-+ */
-+// INTC_OBJECT_T intc_obj;
-+};
-+
-+
-+
-+/*
-+ * function declarations
-+ */
-+void Hal_Pcm_Initialize(PCM_OBJECT_T *);
-+
-+
-+/*
-+ * macro declarations
-+ */
-+#define HAL_PCM_ENABLE_PCM() \
-+{ \
-+ (PCM_CONFIGURATION_0_REG) |= ((u32)0x1 << 31); \
-+}
-+
-+#define HAL_PCM_DISABLE_PCM() \
-+{ \
-+ (PCM_CONFIGURATION_0_REG) &= ~((u32)0x1 << 31); \
-+}
-+
-+#define HAL_PCM_ENABLE_DATA_SWAP() \
-+{ \
-+ (PCM_CONFIGURATION_0_REG) |= (0x1 << 24); \
-+}
-+
-+#define HAL_PCM_DISABLE_DATA_SWAP() \
-+{ \
-+ (PCM_CONFIGURATION_0_REG) &= ~(0x1 << 24); \
-+}
-+
-+#define HAL_PCM_WRITE_TX_DATA_0(tx_data_0) \
-+{ \
-+ (PCM_TX_DATA_31_0_REG) = tx_data_0; \
-+}
-+
-+#define HAL_PCM_WRITE_TX_DATA_1(tx_data_1) \
-+{ \
-+ (PCM_TX_DATA_63_32_REG) = tx_data_1; \
-+}
-+
-+#define HAL_PCM_READ_RX_DATA_0(rx_data_0) \
-+{ \
-+ (rx_data_0) = PCM_RX_DATA_31_0_REG; \
-+}
-+
-+#define HAL_PCM_READ_RX_DATA_1(rx_data_1) \
-+{ \
-+ (rx_data_1) = PCM_RX_DATA_63_32_REG; \
-+}
-+
-+#define HAL_PCM_READ_INTERRUPT_STATUS(status) \
-+{ \
-+ (status) = PCM_INTERRUPT_STATUS_REG; \
-+}
-+
-+#define HAL_PCM_CLEAR_INTERRUPT_STATUS(status) \
-+{ \
-+ (PCM_INTERRUPT_STATUS_REG) = (status & 0xC); \
-+}
-+
-+#define HAL_PCM_DISABLE_RECEIVE_BUFFER_FULL_INTERRUPT() \
-+{ \
-+ (PCM_INTERRUPT_ENABLE_REG) &= ~(0x1 << 0); \
-+}
-+
-+#define HAL_PCM_DISABLE_TRANSMIT_BUFFER_EMPTY_INTERRUPT() \
-+{ \
-+ (PCM_INTERRUPT_ENABLE_REG) &= ~(0x1 << 1); \
-+}
-+
-+#define HAL_PCM_DISABLE_RECEIVE_BUFFER_OVERRUN_INTERRUPT() \
-+{ \
-+ (PCM_INTERRUPT_ENABLE_REG) &= ~(0x1 << 2); \
-+}
-+
-+#define HAL_PCM_DISABLE_TRANSMIT_BUFFER_UNDERRUN_INTERRUPT() \
-+{ \
-+ (PCM_INTERRUPT_ENABLE_REG) &= ~(0x1 << 3); \
-+}
-+
-+#define HAL_PCM_DISABLE_ALL_INTERRUPT_SOURCES() \
-+{ \
-+ (PCM_INTERRUPT_ENABLE_REG) = 0; \
-+}
-+
-+#endif // end of #ifndef _STAR_PCM_H_
-+
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/platform.h
-@@ -0,0 +1,297 @@
-+/*
-+ * arch/arm/mach-cns3xxx/include/mach/platform.h
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (c) ARM Limited 2003. All rights reserved.
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#ifndef __ASM_ARCH_PLATFORM_H
-+#define __ASM_ARCH_PLATFORM_H
-+
-+#ifndef __ASSEMBLY__
-+
-+#include <linux/io.h>
-+
-+/*
-+ * SDRAM
-+ */
-+#define CNS3XXX_SDRAM_BASE 0x00000000
-+
-+/* ------------------------------------------------------------------------
-+ * Cavium Networks Registers
-+ * ------------------------------------------------------------------------
-+ *
-+ */
-+#define CNS3XXX_SYS_ID_OFFSET 0x00
-+#define CNS3XXX_SYS_SW_OFFSET 0x04
-+#define CNS3XXX_SYS_LED_OFFSET 0x08
-+#define CNS3XXX_SYS_OSC0_OFFSET 0x0C
-+
-+#define CNS3XXX_SYS_OSC1_OFFSET 0x10
-+#define CNS3XXX_SYS_OSC2_OFFSET 0x14
-+#define CNS3XXX_SYS_OSC3_OFFSET 0x18
-+#define CNS3XXX_SYS_OSC4_OFFSET 0x1C /* OSC1 for Cavium Networks/AB */
-+
-+#define CNS3XXX_SYS_LOCK_OFFSET 0x20
-+#define CNS3XXX_SYS_100HZ_OFFSET 0x24
-+#define CNS3XXX_SYS_CFGDATA1_OFFSET 0x28
-+#define CNS3XXX_SYS_CFGDATA2_OFFSET 0x2C
-+#define CNS3XXX_SYS_FLAGS_OFFSET 0x30
-+#define CNS3XXX_SYS_FLAGSSET_OFFSET 0x30
-+#define CNS3XXX_SYS_FLAGSCLR_OFFSET 0x34
-+#define CNS3XXX_SYS_NVFLAGS_OFFSET 0x38
-+#define CNS3XXX_SYS_NVFLAGSSET_OFFSET 0x38
-+#define CNS3XXX_SYS_NVFLAGSCLR_OFFSET 0x3C
-+#define CNS3XXX_SYS_RESETCTL_OFFSET 0x40
-+#define CNS3XXX_SYS_PCICTL_OFFSET 0x44
-+#define CNS3XXX_SYS_MCI_OFFSET 0x48
-+#define CNS3XXX_SYS_FLASH_OFFSET 0x4C
-+#define CNS3XXX_SYS_CLCD_OFFSET 0x50
-+#define CNS3XXX_SYS_CLCDSER_OFFSET 0x54
-+#define CNS3XXX_SYS_BOOTCS_OFFSET 0x58
-+#define CNS3XXX_SYS_24MHz_OFFSET 0x5C
-+#define CNS3XXX_SYS_MISC_OFFSET 0x60
-+#define CNS3XXX_SYS_IOSEL_OFFSET 0x70
-+#define CNS3XXX_SYS_PROCID_OFFSET 0x84
-+#define CNS3XXX_SYS_TEST_OSC0_OFFSET 0xC0
-+#define CNS3XXX_SYS_TEST_OSC1_OFFSET 0xC4
-+#define CNS3XXX_SYS_TEST_OSC2_OFFSET 0xC8
-+#define CNS3XXX_SYS_TEST_OSC3_OFFSET 0xCC
-+#define CNS3XXX_SYS_TEST_OSC4_OFFSET 0xD0
-+
-+#define CNS3XXX_SYS_BASE 0x10000000
-+#define CNS3XXX_SYS_ID (CNS3XXX_SYS_BASE + CNS3XXX_SYS_ID_OFFSET)
-+#define CNS3XXX_SYS_SW (CNS3XXX_SYS_BASE + CNS3XXX_SYS_SW_OFFSET)
-+#define CNS3XXX_SYS_LED (CNS3XXX_SYS_BASE + CNS3XXX_SYS_LED_OFFSET)
-+#define CNS3XXX_SYS_OSC0 (CNS3XXX_SYS_BASE + CNS3XXX_SYS_OSC0_OFFSET)
-+#define CNS3XXX_SYS_OSC1 (CNS3XXX_SYS_BASE + CNS3XXX_SYS_OSC1_OFFSET)
-+
-+#define CNS3XXX_SYS_LOCK (CNS3XXX_SYS_BASE + CNS3XXX_SYS_LOCK_OFFSET)
-+#define CNS3XXX_SYS_100HZ (CNS3XXX_SYS_BASE + CNS3XXX_SYS_100HZ_OFFSET)
-+#define CNS3XXX_SYS_CFGDATA1 (CNS3XXX_SYS_BASE + CNS3XXX_SYS_CFGDATA1_OFFSET)
-+#define CNS3XXX_SYS_CFGDATA2 (CNS3XXX_SYS_BASE + CNS3XXX_SYS_CFGDATA2_OFFSET)
-+#define CNS3XXX_SYS_FLAGS (CNS3XXX_SYS_BASE + CNS3XXX_SYS_FLAGS_OFFSET)
-+#define CNS3XXX_SYS_FLAGSSET (CNS3XXX_SYS_BASE + CNS3XXX_SYS_FLAGSSET_OFFSET)
-+#define CNS3XXX_SYS_FLAGSCLR (CNS3XXX_SYS_BASE + CNS3XXX_SYS_FLAGSCLR_OFFSET)
-+#define CNS3XXX_SYS_NVFLAGS (CNS3XXX_SYS_BASE + CNS3XXX_SYS_NVFLAGS_OFFSET)
-+#define CNS3XXX_SYS_NVFLAGSSET (CNS3XXX_SYS_BASE + CNS3XXX_SYS_NVFLAGSSET_OFFSET)
-+#define CNS3XXX_SYS_NVFLAGSCLR (CNS3XXX_SYS_BASE + CNS3XXX_SYS_NVFLAGSCLR_OFFSET)
-+#define CNS3XXX_SYS_RESETCTL (CNS3XXX_SYS_BASE + CNS3XXX_SYS_RESETCTL_OFFSET)
-+#define CNS3XXX_SYS_PCICTL (CNS3XXX_SYS_BASE + CNS3XXX_SYS_PCICTL_OFFSET)
-+#define CNS3XXX_SYS_MCI (CNS3XXX_SYS_BASE + CNS3XXX_SYS_MCI_OFFSET)
-+#define CNS3XXX_SYS_FLASH (CNS3XXX_SYS_BASE + CNS3XXX_SYS_FLASH_OFFSET)
-+#define CNS3XXX_SYS_CLCD (CNS3XXX_SYS_BASE + CNS3XXX_SYS_CLCD_OFFSET)
-+#define CNS3XXX_SYS_CLCDSER (CNS3XXX_SYS_BASE + CNS3XXX_SYS_CLCDSER_OFFSET)
-+#define CNS3XXX_SYS_BOOTCS (CNS3XXX_SYS_BASE + CNS3XXX_SYS_BOOTCS_OFFSET)
-+#define CNS3XXX_SYS_24MHz (CNS3XXX_SYS_BASE + CNS3XXX_SYS_24MHz_OFFSET)
-+#define CNS3XXX_SYS_MISC (CNS3XXX_SYS_BASE + CNS3XXX_SYS_MISC_OFFSET)
-+#define CNS3XXX_SYS_IOSEL (CNS3XXX_SYS_BASE + CNS3XXX_SYS_IOSEL_OFFSET)
-+#define CNS3XXX_SYS_PROCID (CNS3XXX_SYS_BASE + CNS3XXX_SYS_PROCID_OFFSET)
-+#define CNS3XXX_SYS_TEST_OSC0 (CNS3XXX_SYS_BASE + CNS3XXX_SYS_TEST_OSC0_OFFSET)
-+#define CNS3XXX_SYS_TEST_OSC1 (CNS3XXX_SYS_BASE + CNS3XXX_SYS_TEST_OSC1_OFFSET)
-+#define CNS3XXX_SYS_TEST_OSC2 (CNS3XXX_SYS_BASE + CNS3XXX_SYS_TEST_OSC2_OFFSET)
-+#define CNS3XXX_SYS_TEST_OSC3 (CNS3XXX_SYS_BASE + CNS3XXX_SYS_TEST_OSC3_OFFSET)
-+#define CNS3XXX_SYS_TEST_OSC4 (CNS3XXX_SYS_BASE + CNS3XXX_SYS_TEST_OSC4_OFFSET)
-+
-+/*
-+ * Values for CNS3XXX_SYS_RESET_CTRL
-+ */
-+#define CNS3XXX_SYS_CTRL_RESET_CONFIGCLR 0x01
-+#define CNS3XXX_SYS_CTRL_RESET_CONFIGINIT 0x02
-+#define CNS3XXX_SYS_CTRL_RESET_DLLRESET 0x03
-+#define CNS3XXX_SYS_CTRL_RESET_PLLRESET 0x04
-+#define CNS3XXX_SYS_CTRL_RESET_POR 0x05
-+#define CNS3XXX_SYS_CTRL_RESET_DoC 0x06
-+
-+#define CNS3XXX_SYS_CTRL_LED (1 << 0)
-+
-+
-+/* ------------------------------------------------------------------------
-+ * Cavium Networks control registers
-+ * ------------------------------------------------------------------------
-+ */
-+
-+/*
-+ * CNS3XXX_IDFIELD
-+ *
-+ * 31:24 = manufacturer (0x41 = ARM)
-+ * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
-+ * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
-+ * 11:4 = build value
-+ * 3:0 = revision number (0x1 = rev B (AHB))
-+ */
-+
-+/*
-+ * CNS3XXX_SYS_LOCK
-+ * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL,
-+ * SYS_CLD, SYS_BOOTCS
-+ */
-+#define CNS3XXX_SYS_LOCK_LOCKED (1 << 16)
-+#define CNS3XXX_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */
-+
-+/*
-+ * CNS3XXX_SYS_FLASH
-+ */
-+#define CNS3XXX_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */
-+
-+/*
-+ * CNS3XXX_INTREG
-+ * - used to acknowledge and control MMCI and UART interrupts
-+ */
-+#define CNS3XXX_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */
-+#define CNS3XXX_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */
-+#define CNS3XXX_INTREG_CARDIN 0x08 /* MMCI card in detect */
-+ /* write 1 to acknowledge and clear */
-+#define CNS3XXX_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */
-+#define CNS3XXX_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */
-+
-+/*
-+ * Cavium Networks common peripheral addresses
-+ */
-+#define CNS3XXX_SCTL_BASE 0x10001000 /* System controller */
-+
-+/* PCI space */
-+#define CNS3XXX_PCI_BASE 0x41000000 /* PCI Interface */
-+#define CNS3XXX_PCI_CFG_BASE 0x42000000
-+#define CNS3XXX_PCI_MEM_BASE0 0x44000000
-+#define CNS3XXX_PCI_MEM_BASE1 0x50000000
-+#define CNS3XXX_PCI_MEM_BASE2 0x60000000
-+/* Sizes of above maps */
-+#define CNS3XXX_PCI_BASE_SIZE 0x01000000
-+#define CNS3XXX_PCI_CFG_BASE_SIZE 0x02000000
-+#define CNS3XXX_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */
-+#define CNS3XXX_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */
-+#define CNS3XXX_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */
-+
-+#define CNS3XXX_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
-+#define CNS3XXX_LT_BASE 0x80000000 /* Logic Tile expansion */
-+
-+/*
-+ * LED settings, bits [7:0]
-+ */
-+#define CNS3XXX_SYS_LED0 (1 << 0)
-+#define CNS3XXX_SYS_LED1 (1 << 1)
-+#define CNS3XXX_SYS_LED2 (1 << 2)
-+#define CNS3XXX_SYS_LED3 (1 << 3)
-+#define CNS3XXX_SYS_LED4 (1 << 4)
-+#define CNS3XXX_SYS_LED5 (1 << 5)
-+#define CNS3XXX_SYS_LED6 (1 << 6)
-+#define CNS3XXX_SYS_LED7 (1 << 7)
-+
-+#define ALL_LEDS 0xFF
-+
-+#define LED_BANK CNS3XXX_SYS_LED
-+
-+/*
-+ * Control registers
-+ */
-+#define CNS3XXX_IDFIELD_OFFSET 0x0 /* Cavium Networks build information */
-+#define CNS3XXX_FLASHPROG_OFFSET 0x4 /* Flash devices */
-+#define CNS3XXX_INTREG_OFFSET 0x8 /* Interrupt control */
-+#define CNS3XXX_DECODE_OFFSET 0xC /* Fitted logic modules */
-+
-+/*
-+ * System controller bit assignment
-+ */
-+#define CNS3XXX_REFCLK 0
-+#define CNS3XXX_TIMCLK 1
-+
-+#define CNS3XXX_TIMER1_EnSel 15
-+#define CNS3XXX_TIMER2_EnSel 17
-+#define CNS3XXX_TIMER3_EnSel 19
-+#define CNS3XXX_TIMER4_EnSel 21
-+
-+
-+#define MAX_TIMER 2
-+#define MAX_PERIOD 699050
-+#define TICKS_PER_uSEC 1
-+
-+/*
-+ * These are useconds NOT ticks.
-+ *
-+ */
-+#define mSEC_1 1000
-+#define mSEC_5 (mSEC_1 * 5)
-+#define mSEC_10 (mSEC_1 * 10)
-+#define mSEC_25 (mSEC_1 * 25)
-+#define SEC_1 (mSEC_1 * 1000)
-+
-+#define CNS3XXX_CSR_BASE 0x10000000
-+#define CNS3XXX_CSR_SIZE 0x10000000
-+
-+/* Platform Level Setup Functions */
-+
-+extern void cns3xxx_sys_init(void);
-+extern int cns3xxx_pcie_init(u8 ports);
-+
-+/* Information about built-in Ethernet MAC interfaces */
-+struct eth_plat_info {
-+ u8 ports; /* Bitmap of enabled Ports */
-+ u8 eth0_hwaddr[6];
-+ u8 eth1_hwaddr[6];
-+ u8 eth2_hwaddr[6];
-+ u8 cpu_hwaddr[6];
-+};
-+
-+// Config 1 Bitmap
-+#define ETH0_LOAD BIT(0)
-+#define ETH1_LOAD BIT(1)
-+#define ETH2_LOAD BIT(2)
-+#define SATA0_LOAD BIT(3)
-+#define SATA1_LOAD BIT(4)
-+#define PCM_LOAD BIT(5)
-+#define I2S_LOAD BIT(6)
-+#define SPI0_LOAD BIT(7)
-+#define SPI1_LOAD BIT(8)
-+#define PCIe0_LOAD BIT(9)
-+#define PCIe1_LOAD BIT(10)
-+#define USB0_LOAD BIT(11)
-+#define USB1_LOAD BIT(12)
-+#define USB1_ROUTE BIT(13)
-+#define SD_LOAD BIT(14)
-+#define UART0_LOAD BIT(15)
-+#define UART1_LOAD BIT(16)
-+#define UART2_LOAD BIT(17)
-+#define mPCI0_LOAD BIT(18)
-+#define mPCI1_LOAD BIT(19)
-+#define mPCI2_LOAD BIT(20)
-+#define mPCI3_LOAD BIT(21)
-+#define FP_BUT_LOAD BIT(22)
-+#define FP_BUT_HEADER_LOAD BIT(23)
-+#define FP_LED_LOAD BIT(24)
-+#define FP_LED_HEADER_LOAD BIT(25)
-+#define FP_TAMPER_LOAD BIT(26)
-+#define HEADER_33v_LOAD BIT(27)
-+#define SATA_POWER_LOAD BIT(28)
-+#define FP_POWER_LOAD BIT(29)
-+#define GPIO_HEADER_LOAD BIT(30)
-+#define GSP_BAT_LOAD BIT(31)
-+
-+// Config 2 Bitmap
-+#define FAN_LOAD BIT(0)
-+#define SPI_FLASH_LOAD BIT(1)
-+#define NOR_FLASH_LOAD BIT(2)
-+#define GPS_LOAD BIT(3)
-+#define SUPPLY_5v_LOAD BIT(6)
-+#define SUPPLY_33v_LOAD BIT(7)
-+
-+
-+#endif /* __ASM_ARCH_PLATFORM_H */
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/pm.h
-@@ -0,0 +1,333 @@
-+/******************************************************************************
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ *
-+ ******************************************************************************/
-+
-+#ifndef _CNS3XXX_PM_H_
-+#define _CNS3XXX_PM_H_
-+#include <mach/board.h>
-+#define PMU_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_PM_BASE_VIRT+offset)))
-+
-+#define PM_CLK_GATE_REG PMU_REG_VALUE(0x000)
-+#define PM_SOFT_RST_REG PMU_REG_VALUE(0x004)
-+#define PM_HS_CFG_REG PMU_REG_VALUE(0x008)
-+#define PM_CACTIVE_STA_REG PMU_REG_VALUE(0x00C)
-+#define PM_PWR_STA_REG PMU_REG_VALUE(0x010)
-+#define PM_CLK_CTRL_REG PMU_REG_VALUE(0x014)
-+#define PM_PLL_LCD_I2S_CTRL_REG PMU_REG_VALUE(0x018)
-+#define PM_PLL_HM_PD_CTRL_REG PMU_REG_VALUE(0x01C)
-+#define PM_REGULAT_CTRL_REG PMU_REG_VALUE(0x020)
-+#define PM_WDT_CTRL_REG PMU_REG_VALUE(0x024)
-+#define PM_WU_CTRL0_REG PMU_REG_VALUE(0x028)
-+#define PM_WU_CTRL1_REG PMU_REG_VALUE(0x02C)
-+#define PM_CSR_REG PMU_REG_VALUE(0x030)
-+
-+/* PM_CLK_GATE_REG */
-+#define PM_CLK_GATE_REG_OFFSET_SDIO (25)
-+#define PM_CLK_GATE_REG_OFFSET_GPU (24)
-+#define PM_CLK_GATE_REG_OFFSET_CIM (23)
-+#define PM_CLK_GATE_REG_OFFSET_LCDC (22)
-+#define PM_CLK_GATE_REG_OFFSET_I2S (21)
-+#define PM_CLK_GATE_REG_OFFSET_RAID (20)
-+#define PM_CLK_GATE_REG_OFFSET_SATA (19)
-+#define PM_CLK_GATE_REG_OFFSET_PCIE0 (17)
-+#define PM_CLK_GATE_REG_OFFSET_PCIE1 (18)
-+#define PM_CLK_GATE_REG_OFFSET_USB_HOST (16)
-+#define PM_CLK_GATE_REG_OFFSET_USB_OTG (15)
-+#define PM_CLK_GATE_REG_OFFSET_TIMER (14)
-+#define PM_CLK_GATE_REG_OFFSET_CRYPTO (13)
-+#define PM_CLK_GATE_REG_OFFSET_HCIE (12)
-+#define PM_CLK_GATE_REG_OFFSET_SWITCH (11)
-+#define PM_CLK_GATE_REG_OFFSET_GPIO (10)
-+#define PM_CLK_GATE_REG_OFFSET_UART3 (9)
-+#define PM_CLK_GATE_REG_OFFSET_UART2 (8)
-+#define PM_CLK_GATE_REG_OFFSET_UART1 (7)
-+#define PM_CLK_GATE_REG_OFFSET_RTC (5)
-+#define PM_CLK_GATE_REG_OFFSET_GDMA (4)
-+#define PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C (3)
-+#define PM_CLK_GATE_REG_OFFSET_SMC_NFI (1)
-+#define PM_CLK_GATE_REG_MASK (0x03FFFFBA)
-+
-+/* PM_SOFT_RST_REG */
-+#define PM_SOFT_RST_REG_OFFST_WARM_RST_FLAG (31)
-+#define PM_SOFT_RST_REG_OFFST_CPU1 (29)
-+#define PM_SOFT_RST_REG_OFFST_CPU0 (28)
-+#define PM_SOFT_RST_REG_OFFST_SDIO (25)
-+#define PM_SOFT_RST_REG_OFFST_GPU (24)
-+#define PM_SOFT_RST_REG_OFFST_CIM (23)
-+#define PM_SOFT_RST_REG_OFFST_LCDC (22)
-+#define PM_SOFT_RST_REG_OFFST_I2S (21)
-+#define PM_SOFT_RST_REG_OFFST_RAID (20)
-+#define PM_SOFT_RST_REG_OFFST_SATA (19)
-+#define PM_SOFT_RST_REG_OFFST_PCIE1 (18)
-+#define PM_SOFT_RST_REG_OFFST_PCIE0 (17)
-+#define PM_SOFT_RST_REG_OFFST_USB_HOST (16)
-+#define PM_SOFT_RST_REG_OFFST_USB_OTG (15)
-+#define PM_SOFT_RST_REG_OFFST_TIMER (14)
-+#define PM_SOFT_RST_REG_OFFST_CRYPTO (13)
-+#define PM_SOFT_RST_REG_OFFST_HCIE (12)
-+#define PM_SOFT_RST_REG_OFFST_SWITCH (11)
-+#define PM_SOFT_RST_REG_OFFST_GPIO (10)
-+#define PM_SOFT_RST_REG_OFFST_UART3 (9)
-+#define PM_SOFT_RST_REG_OFFST_UART2 (8)
-+#define PM_SOFT_RST_REG_OFFST_UART1 (7)
-+#define PM_SOFT_RST_REG_OFFST_RTC (5)
-+#define PM_SOFT_RST_REG_OFFST_GDMA (4)
-+#define PM_SOFT_RST_REG_OFFST_SPI_PCM_I2C (3)
-+#define PM_SOFT_RST_REG_OFFST_DMC (2)
-+#define PM_SOFT_RST_REG_OFFST_SMC_NFI (1)
-+#define PM_SOFT_RST_REG_OFFST_GLOBAL (0)
-+#define PM_SOFT_RST_REG_MASK (0xF3FFFFBF)
-+
-+/* PMHS_CFG_REG */
-+#define PM_HS_CFG_REG_OFFSET_SDIO (25)
-+#define PM_HS_CFG_REG_OFFSET_GPU (24)
-+#define PM_HS_CFG_REG_OFFSET_CIM (23)
-+#define PM_HS_CFG_REG_OFFSET_LCDC (22)
-+#define PM_HS_CFG_REG_OFFSET_I2S (21)
-+#define PM_HS_CFG_REG_OFFSET_RAID (20)
-+#define PM_HS_CFG_REG_OFFSET_SATA (19)
-+#define PM_HS_CFG_REG_OFFSET_PCIE1 (18)
-+#define PM_HS_CFG_REG_OFFSET_PCIE0 (17)
-+#define PM_HS_CFG_REG_OFFSET_USB_HOST (16)
-+#define PM_HS_CFG_REG_OFFSET_USB_OTG (15)
-+#define PM_HS_CFG_REG_OFFSET_TIMER (14)
-+#define PM_HS_CFG_REG_OFFSET_CRYPTO (13)
-+#define PM_HS_CFG_REG_OFFSET_HCIE (12)
-+#define PM_HS_CFG_REG_OFFSET_SWITCH (11)
-+#define PM_HS_CFG_REG_OFFSET_GPIO (10)
-+#define PM_HS_CFG_REG_OFFSET_UART3 (9)
-+#define PM_HS_CFG_REG_OFFSET_UART2 (8)
-+#define PM_HS_CFG_REG_OFFSET_UART1 (7)
-+#define PM_HS_CFG_REG_OFFSET_RTC (5)
-+#define PM_HS_CFG_REG_OFFSET_GDMA (4)
-+#define PM_HS_CFG_REG_OFFSET_SPI_PCM_I2S (3)
-+#define PM_HS_CFG_REG_OFFSET_DMC (2)
-+#define PM_HS_CFG_REG_OFFSET_SMC_NFI (1)
-+#define PM_HS_CFG_REG_MASK (0x03FFFFBE)
-+#define PM_HS_CFG_REG_MASK_SUPPORT (0x01100806)
-+
-+/* PM_CACTIVE_STA_REG */
-+#define PM_CACTIVE_STA_REG_OFFSET_SDIO (25)
-+#define PM_CACTIVE_STA_REG_OFFSET_GPU (24)
-+#define PM_CACTIVE_STA_REG_OFFSET_CIM (23)
-+#define PM_CACTIVE_STA_REG_OFFSET_LCDC (22)
-+#define PM_CACTIVE_STA_REG_OFFSET_I2S (21)
-+#define PM_CACTIVE_STA_REG_OFFSET_RAID (20)
-+#define PM_CACTIVE_STA_REG_OFFSET_SATA (19)
-+#define PM_CACTIVE_STA_REG_OFFSET_PCIE1 (18)
-+#define PM_CACTIVE_STA_REG_OFFSET_PCIE0 (17)
-+#define PM_CACTIVE_STA_REG_OFFSET_USB_HOST (16)
-+#define PM_CACTIVE_STA_REG_OFFSET_USB_OTG (15)
-+#define PM_CACTIVE_STA_REG_OFFSET_TIMER (14)
-+#define PM_CACTIVE_STA_REG_OFFSET_CRYPTO (13)
-+#define PM_CACTIVE_STA_REG_OFFSET_HCIE (12)
-+#define PM_CACTIVE_STA_REG_OFFSET_SWITCH (11)
-+#define PM_CACTIVE_STA_REG_OFFSET_GPIO (10)
-+#define PM_CACTIVE_STA_REG_OFFSET_UART3 (9)
-+#define PM_CACTIVE_STA_REG_OFFSET_UART2 (8)
-+#define PM_CACTIVE_STA_REG_OFFSET_UART1 (7)
-+#define PM_CACTIVE_STA_REG_OFFSET_RTC (5)
-+#define PM_CACTIVE_STA_REG_OFFSET_GDMA (4)
-+#define PM_CACTIVE_STA_REG_OFFSET_SPI_PCM_I2S (3)
-+#define PM_CACTIVE_STA_REG_OFFSET_DMC (2)
-+#define PM_CACTIVE_STA_REG_OFFSET_SMC_NFI (1)
-+#define PM_CACTIVE_STA_REG_MASK (0x03FFFFBE)
-+
-+/* PM_PWR_STA_REG */
-+#define PM_PWR_STA_REG_REG_OFFSET_SDIO (25)
-+#define PM_PWR_STA_REG_REG_OFFSET_GPU (24)
-+#define PM_PWR_STA_REG_REG_OFFSET_CIM (23)
-+#define PM_PWR_STA_REG_REG_OFFSET_LCDC (22)
-+#define PM_PWR_STA_REG_REG_OFFSET_I2S (21)
-+#define PM_PWR_STA_REG_REG_OFFSET_RAID (20)
-+#define PM_PWR_STA_REG_REG_OFFSET_SATA (19)
-+#define PM_PWR_STA_REG_REG_OFFSET_PCIE1 (18)
-+#define PM_PWR_STA_REG_REG_OFFSET_PCIE0 (17)
-+#define PM_PWR_STA_REG_REG_OFFSET_USB_HOST (16)
-+#define PM_PWR_STA_REG_REG_OFFSET_USB_OTG (15)
-+#define PM_PWR_STA_REG_REG_OFFSET_TIMER (14)
-+#define PM_PWR_STA_REG_REG_OFFSET_CRYPTO (13)
-+#define PM_PWR_STA_REG_REG_OFFSET_HCIE (12)
-+#define PM_PWR_STA_REG_REG_OFFSET_SWITCH (11)
-+#define PM_PWR_STA_REG_REG_OFFSET_GPIO (10)
-+#define PM_PWR_STA_REG_REG_OFFSET_UART3 (9)
-+#define PM_PWR_STA_REG_REG_OFFSET_UART2 (8)
-+#define PM_PWR_STA_REG_REG_OFFSET_UART1 (7)
-+#define PM_PWR_STA_REG_REG_OFFSET_RTC (5)
-+#define PM_PWR_STA_REG_REG_OFFSET_GDMA (4)
-+#define PM_PWR_STA_REG_REG_OFFSET_SPI_PCM_I2S (3)
-+#define PM_PWR_STA_REG_REG_OFFSET_DMC (2)
-+#define PM_PWR_STA_REG_REG_OFFSET_SMC_NFI (1)
-+#define PM_PWR_STA_REG_REG_MASK (0x03FFFFBE)
-+
-+/* PM_CLK_CTRL_REG */
-+#define PM_CLK_CTRL_REG_OFFSET_I2S_MCLK (31)
-+#define PM_CLK_CTRL_REG_OFFSET_DDR2_CHG_EN (30)
-+#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF1_EN (29)
-+#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF0_EN (28)
-+#define PM_CLK_CTRL_REG_OFFSET_TIMER_SIM_MODE (27)
-+#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_DIV (24)
-+#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_SEL (22)
-+#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_DIV (20)
-+#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_SEL (16)
-+#define PM_CLK_CTRL_REG_OFFSET_MDC_DIV (14)
-+#define PM_CLK_CTRL_REG_OFFSET_CRYPTO_CLK_SEL (12)
-+#define PM_CLK_CTRL_REG_OFFSET_CPU_PWR_MODE (9)
-+#define PM_CLK_CTRL_REG_OFFSET_PLL_DDR2_SEL (7)
-+#define PM_CLK_CTRL_REG_OFFSET_DIV_IMMEDIATE (6)
-+#define PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV (4)
-+#define PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL (0)
-+
-+#define PM_CPU_CLK_DIV(DIV) { \
-+ PM_CLK_CTRL_REG &= ~((0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
-+ PM_CLK_CTRL_REG |= (((DIV)&0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
-+}
-+
-+#define PM_PLL_CPU_SEL(CPU) { \
-+ PM_CLK_CTRL_REG &= ~((0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
-+ PM_CLK_CTRL_REG |= (((CPU)&0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
-+}
-+
-+/* PM_PLL_LCD_I2S_CTRL_REG */
-+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_MCLK_SMC_DIV (22)
-+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_R_SEL (17)
-+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_P (11)
-+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_M (3)
-+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_S (0)
-+
-+/* PM_PLL_HM_PD_CTRL_REG */
-+/*
-+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PCIE_PHY1 (13)
-+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PCIE_PHY0 (12)
-+*/
-+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1 (11)
-+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0 (10)
-+/*
-+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_USB_PHY1 (9)
-+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_USB_PHY0 (8)
-+*/
-+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2SCD (6)
-+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2S (5)
-+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_LCD (4)
-+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB (3)
-+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_RGMII (2)
-+#define PM_PLL_HM_PD_CTRL_REG_MASK (0x00000C7C)
-+
-+/* PM_REGULAT_CTRL_REG */
-+
-+/* PM_WDT_CTRL_REG */
-+#define PM_WDT_CTRL_REG_OFFSET_RESET_CPU_ONLY (0)
-+
-+/* PM_WU_CTRL0_REG */
-+
-+/* PM_WU_CTRL1_REG */
-+
-+/* PM_CSR_REG - Clock Scaling Register*/
-+#define PM_CSR_REG_OFFSET_CSR_EN (30)
-+#define PM_CSR_REG_OFFSET_CSR_NUM (0)
-+
-+
-+#define CNS3XXX_PWR_CLK_EN(BLOCK) (0x1<<PM_CLK_GATE_REG_OFFSET_##BLOCK)
-+
-+/* Software reset*/
-+#define CNS3XXX_PWR_SOFTWARE_RST(BLOCK) (0x1<<PM_SOFT_RST_REG_OFFST_##BLOCK)
-+
-+
-+
-+/* CNS3XXX support several power saving mode as following,
-+ * DFS, IDLE, HALT, DOZE, SLEEP, Hibernate
-+ */
-+#define CNS3XXX_PWR_CPU_MODE_DFS (0)
-+#define CNS3XXX_PWR_CPU_MODE_IDLE (1)
-+#define CNS3XXX_PWR_CPU_MODE_HALT (2)
-+#define CNS3XXX_PWR_CPU_MODE_DOZE (3)
-+#define CNS3XXX_PWR_CPU_MODE_SLEEP (4)
-+#define CNS3XXX_PWR_CPU_MODE_HIBERNATE (5)
-+
-+
-+/* Enable functional block */
-+#if 0
-+#define CNS3XXX_PWR_PLL_PCIE_PHY1 (0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PCIE_PHY1)
-+#define CNS3XXX_PWR_PLL_PCIE_PHY0 (0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PCIE_PHY0)
-+#define CNS3XXX_PWR_PLL_SATA_PHY1 (0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1)
-+#define CNS3XXX_PWR_PLL_SATA_PHY0 (0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_USB_PHY0)
-+#define CNS3XXX_PWR_PLL_USB_PHY1 (0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_USB_PHY1)
-+#define CNS3XXX_PWR_PLL_USB_PHY0 (0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_USB_PHY0)
-+#define CNS3XXX_PWR_PLL_I2SCD (0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2SCD)
-+#define CNS3XXX_PWR_PLL_I2S (0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2S)
-+#define CNS3XXX_PWR_PLL_LCD (0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_LCD)
-+#define CNS3XXX_PWR_PLL_USB (0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB)
-+#define CNS3XXX_PWR_PLL_RGMII (0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_RGMII)
-+#else
-+#define CNS3XXX_PWR_PLL(BLOCK) (0x1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_##BLOCK)
-+#endif
-+#define CNS3XXX_PWR_PLL_ALL PM_PLL_HM_PD_CTRL_REG_MASK
-+
-+void cns3xxx_pwr_power_up(unsigned int dev_num);
-+void cns3xxx_pwr_power_down(unsigned int dev_num);
-+
-+
-+/* Change CPU frequency and divider */
-+#define CNS3XXX_PWR_PLL_CPU_300MHZ (0)
-+#define CNS3XXX_PWR_PLL_CPU_333MHZ (1)
-+#define CNS3XXX_PWR_PLL_CPU_366MHZ (2)
-+#define CNS3XXX_PWR_PLL_CPU_400MHZ (3)
-+#define CNS3XXX_PWR_PLL_CPU_433MHZ (4)
-+#define CNS3XXX_PWR_PLL_CPU_466MHZ (5)
-+#define CNS3XXX_PWR_PLL_CPU_500MHZ (6)
-+#define CNS3XXX_PWR_PLL_CPU_533MHZ (7)
-+#define CNS3XXX_PWR_PLL_CPU_566MHZ (8)
-+#define CNS3XXX_PWR_PLL_CPU_600MHZ (9)
-+#define CNS3XXX_PWR_PLL_CPU_633MHZ (10)
-+#define CNS3XXX_PWR_PLL_CPU_666MHZ (11)
-+#define CNS3XXX_PWR_PLL_CPU_700MHZ (12)
-+
-+#define CNS3XXX_PWR_CPU_CLK_DIV_BY1 (0)
-+#define CNS3XXX_PWR_CPU_CLK_DIV_BY2 (1)
-+#define CNS3XXX_PWR_CPU_CLK_DIV_BY4 (2)
-+
-+
-+void cns3xxx_pwr_change_pll_cpu(unsigned int cpu_sel);
-+
-+
-+
-+/* Change DDR2 frequency */
-+#define CNS3XXX_PWR_PLL_DDR2_200MHZ (0)
-+#define CNS3XXX_PWR_PLL_DDR2_266MHZ (1)
-+#define CNS3XXX_PWR_PLL_DDR2_333MHZ (2)
-+#define CNS3XXX_PWR_PLL_DDR2_400MHZ (3)
-+
-+/* Clock enable*/
-+void cns3xxx_pwr_clk_en(unsigned int block);
-+/* Software reset*/
-+void cns3xxx_pwr_soft_rst(unsigned int block);
-+void cns3xxx_pwr_soft_rst_force(unsigned int block);
-+/* PLL/Hard macro */
-+void cns3xxx_pwr_power_up(unsigned int dev_num);
-+void cns3xxx_pwr_power_down(unsigned int dev_num);
-+/* Change CPU clock */
-+void cns3xxx_pwr_change_cpu_clock(unsigned int cpu_sel, unsigned int div_sel);
-+/* System enter into sleep mode */
-+void cns3xxx_pwr_sleep(void);
-+
-+int cns3xxx_cpu_clock(void);
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/scu.h
-@@ -0,0 +1,34 @@
-+/*
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#ifndef __ASMARM_ARCH_SCU_H
-+#define __ASMARM_ARCH_SCU_H
-+
-+/*
-+ * SCU registers
-+ */
-+#define SCU_CTRL 0x00
-+#define SCU_CONFIG 0x04
-+#define SCU_CPU_STATUS 0x08
-+#define SCU_INVALIDATE 0x0c
-+#define SCU_FPGA_REVISION 0x10
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/sdhci.h
-@@ -0,0 +1,42 @@
-+/*******************************************************************************
-+ *
-+ * arch/arm/mach-cns3xxx/include/mach/sdhci.h
-+ *
-+ * Scott Shu
-+ *
-+ * Copyright (c) 2009 Cavium Networks
-+ *
-+ * SDHCI platform data definitions
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ *
-+ ******************************************************************************/
-+
-+#ifndef _CNS3XXX_SDHCI_H_
-+#define _CNS3XXX_SDHCI_H_
-+
-+struct platform_device;
-+
-+struct cns3xxx_sdhci_platdata {
-+ unsigned int max_width;
-+ unsigned int host_caps;
-+ char **clocks;
-+
-+ struct sdhci_host * sdhci_host;
-+};
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/smp.h
-@@ -0,0 +1,49 @@
-+/*
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#ifndef ASMARM_ARCH_SMP_H
-+#define ASMARM_ARCH_SMP_H
-+
-+
-+#include <asm/hardware/gic.h>
-+
-+#define hard_smp_processor_id() \
-+ ({ \
-+ unsigned int cpunum; \
-+ __asm__("mrc p15, 0, %0, c0, c0, 5" \
-+ : "=r" (cpunum)); \
-+ cpunum &= 0x0F; \
-+ })
-+
-+/*
-+ * We use IRQ1 as the IPI
-+ */
-+static inline void smp_cross_call(const struct cpumask *mask)
-+{
-+ gic_raise_softirq(mask, 2);
-+}
-+
-+static inline void smp_cross_call_cache(const struct cpumask *mask)
-+{
-+ gic_raise_softirq(mask, 1);
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/system.h
-@@ -0,0 +1,51 @@
-+/*
-+ * arch/arm/mach-cns3xxx/include/mach/system.h
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (C) 2003 ARM Limited
-+ * Copyright (C) 2000 Deep Blue Solutions Ltd
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+#ifndef __ASM_ARCH_SYSTEM_H
-+#define __ASM_ARCH_SYSTEM_H
-+
-+#include <linux/io.h>
-+#include <mach/hardware.h>
-+#include <mach/platform.h>
-+#include <mach/pm.h>
-+
-+static inline void arch_idle(void)
-+{
-+ /*
-+ * This should do all the clock switching
-+ * and wait for interrupt tricks
-+ */
-+ cpu_do_idle();
-+}
-+
-+static inline void arch_reset(char mode, const char *cmd)
-+{
-+ /*
-+ * To reset, we hit the on-board reset register
-+ * in the system FPGA
-+ */
-+ cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(GLOBAL));
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/timex.h
-@@ -0,0 +1,27 @@
-+/*
-+ * arch/arm/mach-cns3xxx/include/mach/timex.h
-+ *
-+ * Cavium Networks architecture timex specifications
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (C) 2003 ARM Limited
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#define CLOCK_TICK_RATE (50000000 / 16)
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h
-@@ -0,0 +1,68 @@
-+/*
-+ * arch/arm/mach-cns3xxx/include/mach/uncompress.h
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (C) 2003 ARM Limited
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+
-+#include <mach/board.h>
-+
-+#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
-+#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c))
-+#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30))
-+#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18))
-+
-+/*
-+ * Return the UART base address
-+ */
-+static inline unsigned long get_uart_base(void)
-+{
-+ return CNS3XXX_UART0_BASE;
-+}
-+
-+/*
-+ * This does not append a newline
-+ */
-+static inline void putc(int c)
-+{
-+ unsigned long base = get_uart_base();
-+
-+ while (AMBA_UART_FR(base) & (1 << 5))
-+ barrier();
-+
-+ AMBA_UART_DR(base) = c;
-+}
-+
-+static inline void flush(void)
-+{
-+ unsigned long base = get_uart_base();
-+
-+ while (AMBA_UART_FR(base) & (1 << 3))
-+ barrier();
-+}
-+
-+/*
-+ * nothing to do
-+ */
-+#define arch_decomp_setup()
-+#define arch_decomp_wdog()
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h
-@@ -0,0 +1,26 @@
-+/*
-+ * arch/arm/mach-cns3xxx/include/mach/vmalloc.h
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (C) 2003 ARM Limited
-+ * Copyright (C) 2000 Russell King.
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -0,0 +1,101 @@
-+menu "CNS3XXX platform type"
-+ depends on ARCH_CNS3XXX
-+
-+config MACH_GW2388
-+ bool "Support Gateworks Laguna Platform"
-+ select ARM_GIC
-+ help
-+ Include support for the Cavium Networks CNS3XXX MPCore Platform Baseboard.
-+ This is a platform with an on-board ARM11 MPCore and has support for USB,
-+ USB-OTG, MMC/SD/SDIO and PCI-E, etc.
-+
-+config CNS3XXX_PM_API
-+ bool "Support for CNS3XXX Power Managemnet API"
-+ depends on ARCH_CNS3XXX
-+ default y
-+ help
-+ Enable support for the CNS3XXX Power Managemnet API.
-+
-+config CNS3XXX_RAID
-+ bool "Support for CNS3XXX RAID"
-+ depends on ARCH_CNS3XXX
-+ help
-+ Enable RAID 4/5/6 Hardware accelartion in CNS3XXX.
-+ If unsure, say N.
-+
-+config CNS3XXX_DMAC
-+ bool "Support for CNS3XXX DMAC"
-+ depends on ARCH_CNS3XXX
-+ help
-+ Enable support for the CNS3XXX DMA controllers.
-+
-+choice
-+ prompt "PROM VERSTION"
-+ default SILICON
-+ help
-+ Select the PROM interrupt ID mapping.
-+config SILICON
-+ bool "CNS3XXX_SILICON"
-+ help
-+ Temporary option.
-+ Interrupt
-+ ID Source Function Trigger Type
-+ --- ------------- ------------- ----------------
-+ 32 clkscale_intr PMU rising edge
-+ 33 sdio_intr SDIO high level
-+ 34 l2cc_intr L2CC high level
-+ 35 rtc_intr RTC high level
-+ 36 i2s_intr I2S high level
-+ 37 pcm_intr_n PCM high level
-+ 38 spi_intr_n SPI high level
-+ 39 i2c_intr_n I2C high level
-+ 40 cim_intr CIM high level
-+ 41 gpu_intr GPU high level
-+ 42 lcd_intr LCD high level
-+ 43 gpioa_intr GPIOA programmable
-+ 44 gpiob_intr GPIOB programmable
-+ 45 irda0_intr UART0 high level
-+ 46 irda1_intr UART1 high level
-+ 47 irda2_intr UART2 high level
-+ 48 arm11_intr ARM11 high level
-+ 49 swsta_intr PSE Status high level
-+ 50 tstc_r0_intr PSE R0TxComplete rising edge
-+ 51 fstc_r0_intr PSE R0RxComplete rising edge
-+ 52 tsqe_r0_intr PSE R0QEmpty rising edge
-+ 53 tsqe_r0_intr PSE R0QFull rising edge
-+ 54 tstc_r1_intr PSE R1TxComplete rising edge
-+ 55 fstc_r1_intr PSE R1RxComplete rising edge
-+ 56 tsqe_r1_intr PSE R1QEmpty rising edge
-+ 57 tsqe_r1_intr PSE R1QFull rising edge
-+ 58 hnat_intr PPE high level
-+ 59 crypto_intr CRYPTO high level
-+ 60 hcie_intr HCIE rising edge
-+ 61 pcie0_intr PCIE0 Device high level
-+ 62 pcie1_intr PCIE1 Device high level
-+ 63 usbotg_intr USB OTG high level
-+ 64 ehci_intr USB EHCI high level
-+ 65 sata_intr SATA high level
-+ 66 raid_intr_n RAID high level
-+ 67 smc_intr_n SMC high level
-+ 68 dmac_abort_intr DMAC high level
-+ 86:69 dmac_intr[17:0] DMAC high level
-+ 87 pcie0_rc_intr PCIE0 RC high level
-+ 88 pcie1_rc_intr PCIE1 RC high level
-+ 89 timer1_intr TIMER 1 high level
-+ 90 timer2_intr TIMER 2 high level
-+ 91 ochi_intr_n USB OCHI high level
-+ 92 timer3_intr TIMER 3 high level
-+ 93 ext_intr0 Extrenal Pin programmable
-+ 94 ext_intr1 Extrenal Pin programmable
-+ 95 ext_intr2 Extrenal Pin programmable
-+
-+endchoice
-+
-+config CNS3XXX_GPU_ENVIRONMENT
-+ bool "CNS3XXX GPU(GC300 2D Acceleration) Support"
-+ default n
-+ help
-+ Say Y if you want to support 2D acceleration.
-+
-+endmenu
-+
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/laguna-setup.c
-@@ -0,0 +1,593 @@
-+/*
-+ * linux/arch/arm/mach-cns3xxx/laguna.c
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (C) 2008 ARM Limited
-+ * Copyright (C) 2000 Deep Blue Solutions Ltd
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/device.h>
-+#include <linux/if_ether.h>
-+#include <linux/socket.h>
-+#include <linux/netdevice.h>
-+
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c/at24.h>
-+#include <linux/leds.h>
-+#include <linux/i2c/pca953x.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/mmc/host.h>
-+#include <mach/lm.h>
-+#include <mach/sdhci.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <linux/irq.h>
-+
-+#include "core.h"
-+
-+struct laguna_board_info {
-+ char model[6];
-+ u32 config_bitmap;
-+ u32 config2_bitmap;
-+ u8 nor_flash_size;
-+ u8 spi_flash_size;
-+};
-+
-+static struct laguna_board_info laguna_info __initdata;
-+
-+/*
-+ * Cavium Networks ARM11 MPCore platform devices
-+ */
-+
-+static struct mtd_partition laguna_norflash_partitions[] = {
-+ /* Bootloader */
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = SZ_256K,
-+ .mask_flags = MTD_WRITEABLE, /* force read-only */
-+ },
-+ /* Bootloader params */
-+ {
-+ .name = "params",
-+ .offset = SZ_256K,
-+ .size = SZ_128K,
-+ .mask_flags = 0,
-+ },
-+ /* linux */
-+ {
-+ .name = "linux",
-+ .offset = SZ_256K + SZ_128K,
-+ .size = SZ_2M,
-+ .mask_flags = 0,
-+ },
-+ /* Root FS */
-+ {
-+ .name = "rootfs",
-+ .offset = SZ_256K + SZ_128K + SZ_2M,
-+ .size = SZ_16M - SZ_256K - SZ_128K - SZ_2M,
-+ .mask_flags = 0,
-+ }
-+};
-+
-+static struct physmap_flash_data laguna_norflash_data = {
-+ .width = 2,
-+ .parts = laguna_norflash_partitions,
-+ .nr_parts = ARRAY_SIZE(laguna_norflash_partitions),
-+};
-+
-+static struct resource laguna_norflash_resource = {
-+ .start = CNS3XXX_FLASH0_BASE,
-+ .end = CNS3XXX_FLASH0_BASE + SZ_16M - 1,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device laguna_norflash_device = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &laguna_norflash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &laguna_norflash_resource,
-+};
-+
-+/* UART0 */
-+static struct resource laguna_uart_resources[] = {
-+ {
-+ .start = CNS3XXX_UART0_BASE,
-+ .end = CNS3XXX_UART0_BASE + SZ_4K - 1,
-+ .flags = IORESOURCE_MEM
-+ },{
-+ .start = CNS3XXX_UART1_BASE,
-+ .end = CNS3XXX_UART1_BASE + SZ_4K - 1,
-+ .flags = IORESOURCE_MEM
-+ },{
-+ .start = CNS3XXX_UART2_BASE,
-+ .end = CNS3XXX_UART2_BASE + SZ_4K - 1,
-+ .flags = IORESOURCE_MEM
-+ },
-+};
-+
-+static struct plat_serial8250_port laguna_uart_data[] = {
-+ {
-+ .membase = (char*) (CNS3XXX_UART0_BASE_VIRT),
-+ .mapbase = (CNS3XXX_UART0_BASE),
-+ .irq = IRQ_CNS3XXX_UART0,
-+ .iotype = UPIO_MEM,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_NO_TXEN_TEST,
-+ .regshift = 2,
-+ .uartclk = 24000000,
-+ .type = PORT_16550A,
-+ },{
-+ .membase = (char*) (CNS3XXX_UART1_BASE_VIRT),
-+ .mapbase = (CNS3XXX_UART1_BASE),
-+ .irq = IRQ_CNS3XXX_UART1,
-+ .iotype = UPIO_MEM,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_NO_TXEN_TEST,
-+ .regshift = 2,
-+ .uartclk = 24000000,
-+ .type = PORT_16550A,
-+ },{
-+ .membase = (char*) (CNS3XXX_UART2_BASE_VIRT),
-+ .mapbase = (CNS3XXX_UART2_BASE),
-+ .irq = IRQ_CNS3XXX_UART2,
-+ .iotype = UPIO_MEM,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_NO_TXEN_TEST,
-+ .regshift = 2,
-+ .uartclk = 24000000,
-+ .type = PORT_16550A,
-+ },
-+ { },
-+};
-+
-+static struct platform_device laguna_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = laguna_uart_data,
-+ .num_resources = 3,
-+ .resource = laguna_uart_resources
-+};
-+
-+/* SDIO, MMC/SD */
-+static struct resource laguna_sdio_resource[] = {
-+ {
-+ .start = CNS3XXX_SDIO_BASE,
-+ .end = CNS3XXX_SDIO_BASE + SZ_4K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },{
-+ .start = IRQ_CNS3XXX_SDIO,
-+ .end = IRQ_CNS3XXX_SDIO,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+struct cns3xxx_sdhci_platdata laguna_sdio_platform_data = {
-+ .max_width = 4,
-+ .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-+};
-+
-+static u64 laguna_device_sdhci_dmamask = 0xffffffffUL;
-+
-+static struct platform_device laguna_sdio_device = {
-+ .name = "cns3xxx-sdhci",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(laguna_sdio_resource),
-+ .resource = laguna_sdio_resource,
-+ .dev = {
-+ .dma_mask = &laguna_device_sdhci_dmamask,
-+ .coherent_dma_mask = 0xffffffffUL,
-+ .platform_data = &laguna_sdio_platform_data,
-+ }
-+};
-+
-+static struct pca953x_platform_data laguna_pca_data = {
-+ .gpio_base = 100,
-+};
-+
-+static struct resource laguna_i2c_resource[] = {
-+ {
-+ .start = CNS3XXX_SSP_BASE + 0x20,
-+ .end = 0x7100003f,
-+ .flags = IORESOURCE_MEM,
-+ },{
-+ .start = IRQ_CNS3XXX_I2C,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device laguna_i2c_controller_device = {
-+ .name = "cns3xxx-i2c",
-+ .num_resources = 2,
-+ .resource = laguna_i2c_resource,
-+};
-+
-+static struct resource laguna_usb_ehci_resource[] = {
-+ {
-+ .start = CNS3XXX_USB_BASE,
-+ .end = CNS3XXX_USB_BASE + SZ_16M - 1,
-+ .flags = IORESOURCE_MEM,
-+ },{
-+ .start = IRQ_CNS3XXX_USB_EHCI,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 laguna_usb_dma_mask = 0xffffffffULL;
-+
-+static struct platform_device laguna_usb_ehci_device = {
-+ .name = "cns3xxx-ehci",
-+ .num_resources = ARRAY_SIZE(laguna_usb_ehci_resource),
-+ .resource = laguna_usb_ehci_resource,
-+ .dev = {
-+ .dma_mask = &laguna_usb_dma_mask,
-+ .coherent_dma_mask = 0xffffffffULL,
-+ },
-+};
-+
-+static struct resource laguna_usb_ohci_resource[] = {
-+ {
-+ .start = CNS3XXX_USB_OHCI_BASE,
-+ .end = CNS3XXX_USB_OHCI_BASE + SZ_16M - 1,
-+ .flags = IORESOURCE_MEM,
-+ },{
-+ .start = IRQ_CNS3XXX_USB_OHCI,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 laguna_usb_ohci_dma_mask = 0xffffffffULL;
-+static struct platform_device laguna_usb_ohci_device = {
-+ .name = "cns3xxx-ohci",
-+ .dev = {
-+ .dma_mask = &laguna_usb_ohci_dma_mask,
-+ .coherent_dma_mask = 0xffffffffULL,
-+ },
-+ .num_resources = 2,
-+ .resource = laguna_usb_ohci_resource,
-+};
-+
-+static u64 laguna_usbotg_dma_mask = 0xffffffffULL;
-+static struct lm_device laguna_usb_otg_device = {
-+ .dev = {
-+ .dma_mask = &laguna_usbotg_dma_mask,
-+ .coherent_dma_mask = 0xffffffffULL,
-+ },
-+ .resource = {
-+ .start = CNS3XXX_USBOTG_BASE,
-+ .end = CNS3XXX_USBOTG_BASE + SZ_16M - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ .irq = IRQ_CNS3XXX_USB_OTG,
-+};
-+
-+static struct resource laguna_ahci_resource[] = {
-+ {
-+ .start = CNS3XXX_SATA2_BASE,
-+ .end = CNS3XXX_SATA2_BASE + CNS3XXX_SATA2_SIZE - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IRQ_CNS3XXX_SATA,
-+ .end = IRQ_CNS3XXX_SATA,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 laguna_device_ahci_dmamask = 0xffffffffUL;
-+
-+static struct platform_device laguna_ahci = {
-+ .name = "cns3xxx_ahci",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &laguna_device_ahci_dmamask,
-+ .coherent_dma_mask = 0xffffffffUL,
-+ },
-+ .resource = laguna_ahci_resource,
-+ .num_resources = ARRAY_SIZE(laguna_ahci_resource),
-+};
-+
-+/* SPI Flash */
-+static struct mtd_partition laguna_spiflash_partitions[] = {
-+ /* Bootloader */
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = SZ_128K,
-+ },
-+ /* Bootloader params */
-+ {
-+ .name = "params",
-+ .offset = SZ_128K,
-+ .size = SZ_128K,
-+ },
-+ /* linux */
-+ {
-+ .name = "linux",
-+ .offset = SZ_256K,
-+ .size = 0x180000,
-+ .mask_flags = 0,
-+ },
-+ /* FileSystem */
-+ {
-+ .name = "rootfs",
-+ .offset = SZ_256K + 0x180000,
-+ .size = SZ_4M - SZ_256K - 0x180000,
-+ }
-+};
-+
-+static struct flash_platform_data laguna_spiflash_data = {
-+ .parts = laguna_spiflash_partitions,
-+ .nr_parts = ARRAY_SIZE(laguna_spiflash_partitions),
-+};
-+
-+static struct spi_board_info __initdata laguna_spi_devices[] = {
-+ {
-+ .modalias = "m25p80",
-+ .platform_data = &laguna_spiflash_data,
-+ .max_speed_hz = 50000000,
-+ .bus_num = 1,
-+ .chip_select = 0,
-+ },
-+};
-+
-+static struct platform_device laguna_spi_controller_device = {
-+ .name = "cns3xxx_spi",
-+};
-+
-+static struct gpio_led laguna_gpio_leds[] = {
-+ {
-+ .name = "user1", /* Green Led */
-+ .gpio = 115,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "user2", /* Red Led */
-+ .gpio = 114,
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct gpio_led_platform_data laguna_gpio_leds_data = {
-+ .num_leds = 2,
-+ .leds = laguna_gpio_leds,
-+};
-+
-+static struct platform_device laguna_gpio_leds_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &laguna_gpio_leds_data,
-+};
-+
-+static struct eth_plat_info laguna_net_data = {
-+ .ports = 3, // Bring Up both Eth port by Default
-+};
-+
-+static struct platform_device laguna_net_device = {
-+ .name = "cns3xxx-net",
-+ .id = -1,
-+ .dev.platform_data = &laguna_net_data,
-+};
-+
-+static struct memory_accessor *at24_mem_acc;
-+
-+static void at24_setup(struct memory_accessor *mem_acc, void *context)
-+{
-+ char buf[8];
-+
-+ at24_mem_acc = mem_acc;
-+
-+ /* Read MAC addresses */
-+ if (at24_mem_acc->read(at24_mem_acc, buf, 0x100, 6) == 6)
-+ memcpy(&laguna_net_data.eth0_hwaddr, buf, ETH_ALEN);
-+ if (at24_mem_acc->read(at24_mem_acc, buf, 0x106, 6) == 6)
-+ memcpy(&laguna_net_data.eth1_hwaddr, buf, ETH_ALEN);
-+ if (at24_mem_acc->read(at24_mem_acc, buf, 0x10C, 6) == 6)
-+ memcpy(&laguna_net_data.eth2_hwaddr, buf, ETH_ALEN);
-+ if (at24_mem_acc->read(at24_mem_acc, buf, 0x112, 6) == 6)
-+ memcpy(&laguna_net_data.cpu_hwaddr, buf, ETH_ALEN);
-+
-+ /* Read out Model Information */
-+ if (at24_mem_acc->read(at24_mem_acc, buf, 0x130, 16) == 16)
-+ memcpy(&laguna_info.model, buf, 16);
-+ if (at24_mem_acc->read(at24_mem_acc, buf, 0x140, 1) == 1)
-+ memcpy(&laguna_info.nor_flash_size, buf, 1);
-+ if (at24_mem_acc->read(at24_mem_acc, buf, 0x141, 1) == 1)
-+ memcpy(&laguna_info.spi_flash_size, buf, 1);
-+ if (at24_mem_acc->read(at24_mem_acc, buf, 0x142, 4) == 4)
-+ memcpy(&laguna_info.config_bitmap, buf, 8);
-+ if (at24_mem_acc->read(at24_mem_acc, buf, 0x146, 4) == 4)
-+ memcpy(&laguna_info.config2_bitmap, buf, 8);
-+};
-+
-+static struct at24_platform_data laguna_eeprom_info = {
-+ .byte_len = 1024,
-+ .page_size = 16,
-+ .flags = AT24_FLAG_READONLY,
-+ .setup = at24_setup,
-+};
-+
-+static struct i2c_board_info __initdata laguna_i2c_devices[] = {
-+ {
-+ I2C_BOARD_INFO("pca9555", 0x23),
-+ .platform_data = &laguna_pca_data,
-+ },
-+ {
-+ I2C_BOARD_INFO("gsp", 0x29),
-+ },
-+ {
-+ I2C_BOARD_INFO ("24c08",0x50),
-+ .platform_data = &laguna_eeprom_info,
-+ },
-+ {
-+ I2C_BOARD_INFO("ds1672", 0x68),
-+ },
-+};
-+
-+static void __init laguna_init(void)
-+{
-+ cns3xxx_sys_init();
-+
-+ platform_device_register(&laguna_i2c_controller_device);
-+
-+ i2c_register_board_info(0, laguna_i2c_devices, ARRAY_SIZE(laguna_i2c_devices));
-+
-+ pm_power_off = cns3xxx_power_off;
-+}
-+
-+static int __init laguna_model_setup(void)
-+{
-+ if (!machine_is_gw2388())
-+ return 0;
-+
-+ printk("Running on Gateworks Laguna %s\n", laguna_info.model);
-+
-+ if (strncmp(laguna_info.model, "GW", 2) == 0) {
-+ if (laguna_info.config_bitmap & ETH0_LOAD)
-+ laguna_net_data.ports |= BIT(0);
-+ if (laguna_info.config_bitmap & ETH1_LOAD)
-+ laguna_net_data.ports |= BIT(1);
-+ if (laguna_info.config_bitmap & ETH2_LOAD)
-+ laguna_net_data.ports |= BIT(2);
-+ if (laguna_net_data.ports)
-+ platform_device_register(&laguna_net_device);
-+
-+ if (laguna_info.config_bitmap & (SATA0_LOAD | SATA1_LOAD))
-+ platform_device_register(&laguna_ahci);
-+
-+ if (laguna_info.config_bitmap & (PCIe0_LOAD))
-+ cns3xxx_pcie_init(1);
-+
-+ if (laguna_info.config_bitmap & (PCIe1_LOAD))
-+ cns3xxx_pcie_init(2);
-+
-+ if (laguna_info.config_bitmap & (USB0_LOAD))
-+ lm_device_register(&laguna_usb_otg_device);
-+
-+ if (laguna_info.config_bitmap & (USB1_LOAD)) {
-+ platform_device_register(&laguna_usb_ehci_device);
-+ platform_device_register(&laguna_usb_ohci_device);
-+ }
-+
-+ if (laguna_info.config_bitmap & (SD_LOAD))
-+ platform_device_register(&laguna_sdio_device);
-+
-+ if (laguna_info.config_bitmap & (UART0_LOAD))
-+ laguna_uart.num_resources = 1;
-+ if (laguna_info.config_bitmap & (UART1_LOAD))
-+ laguna_uart.num_resources = 2;
-+ if (laguna_info.config_bitmap & (UART2_LOAD))
-+ laguna_uart.num_resources = 3;
-+ platform_device_register(&laguna_uart);
-+
-+ if (laguna_info.config2_bitmap & (NOR_FLASH_LOAD)) {
-+ switch (laguna_info.nor_flash_size) {
-+ case 1:
-+ laguna_norflash_partitions[3].size = SZ_8M - SZ_256K - SZ_128K - SZ_2M;
-+ laguna_norflash_resource.end = CNS3XXX_FLASH0_BASE + SZ_8M - 1;
-+ break;
-+ case 2:
-+ laguna_norflash_partitions[3].size = SZ_16M - SZ_256K - SZ_128K - SZ_2M;
-+ laguna_norflash_resource.end = CNS3XXX_FLASH0_BASE + SZ_16M - 1;
-+ break;
-+ case 3:
-+ laguna_norflash_partitions[3].size = SZ_32M - SZ_256K - SZ_128K - SZ_2M;
-+ laguna_norflash_resource.end = CNS3XXX_FLASH0_BASE + SZ_32M - 1;
-+ break;
-+ case 4:
-+ laguna_norflash_partitions[3].size = SZ_64M - SZ_256K - SZ_128K - SZ_2M;
-+ laguna_norflash_resource.end = CNS3XXX_FLASH0_BASE + SZ_64M - 1;
-+ break;
-+ case 5:
-+ laguna_norflash_partitions[3].size = SZ_128M - SZ_256K - SZ_128K - SZ_2M;
-+ laguna_norflash_resource.end = CNS3XXX_FLASH0_BASE + SZ_128M - 1;
-+ break;
-+ }
-+ platform_device_register(&laguna_norflash_device);
-+ }
-+
-+ if (laguna_info.config2_bitmap & (SPI_FLASH_LOAD)) {
-+ switch (laguna_info.spi_flash_size) {
-+ case 1:
-+ laguna_spiflash_partitions[3].size = SZ_4M - SZ_256K - 0x180000;
-+ break;
-+ case 2:
-+ laguna_spiflash_partitions[3].size = SZ_8M - SZ_256K - 0x180000;
-+ break;
-+ case 3:
-+ laguna_spiflash_partitions[3].size = SZ_16M - SZ_256K - 0x180000;
-+ break;
-+ case 4:
-+ laguna_spiflash_partitions[3].size = SZ_32M - SZ_256K - 0x180000;
-+ break;
-+ case 5:
-+ laguna_spiflash_partitions[3].size = SZ_64M - SZ_256K - 0x180000;
-+ break;
-+ }
-+ spi_register_board_info(laguna_spi_devices, ARRAY_SIZE(laguna_spi_devices));
-+ }
-+
-+ if (laguna_info.config_bitmap & (SPI0_LOAD | SPI1_LOAD))
-+ {
-+ platform_device_register(&laguna_spi_controller_device);
-+ }
-+
-+ /*
-+ * Do any model specific setup not known by the bitmap by matching
-+ * the first 6 characters of the model name
-+ */
-+
-+ if (strncmp(laguna_info.model, "GW2388", 6) == 0)
-+ {
-+ platform_device_register(&laguna_gpio_leds_device);
-+ }
-+ } else {
-+ // Do some defaults here, not sure what yet
-+ }
-+
-+ return 0;
-+}
-+late_initcall(laguna_model_setup);
-+
-+MACHINE_START(GW2388, "Gateworks Laguna Platform")
-+ .phys_io = CNS3XXX_UART0_BASE,
-+ .io_pg_offst = (CNS3XXX_UART0_BASE_VIRT >> 18) & 0xfffc,
-+ .boot_params = 0x00000100,
-+ .map_io = cns3xxx_map_io,
-+ .init_irq = cns3xxx_init_irq,
-+ .timer = &cns3xxx_timer,
-+ .init_machine = laguna_init,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/lm.c
-@@ -0,0 +1,98 @@
-+/*
-+ * linux/arch/arm/mach-integrator/lm.c
-+ *
-+ * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/version.h>
-+#include <linux/slab.h>
-+
-+#include <mach/lm.h>
-+
-+#define to_lm_device(d) container_of(d, struct lm_device, dev)
-+#define to_lm_driver(d) container_of(d, struct lm_driver, drv)
-+
-+static int lm_match(struct device *dev, struct device_driver *drv)
-+{
-+ return 1;
-+}
-+
-+static int lm_bus_probe(struct device *dev)
-+{
-+ struct lm_device *lmdev = to_lm_device(dev);
-+ struct lm_driver *lmdrv = to_lm_driver(dev->driver);
-+
-+ return lmdrv->probe(lmdev);
-+}
-+
-+static int lm_bus_remove(struct device *dev)
-+{
-+ struct lm_device *lmdev = to_lm_device(dev);
-+ struct lm_driver *lmdrv = to_lm_driver(dev->driver);
-+
-+ if (lmdrv->remove)
-+ lmdrv->remove(lmdev);
-+ return 0;
-+}
-+
-+static struct bus_type lm_bustype = {
-+ .name = "logicmodule",
-+ .match = lm_match,
-+ .probe = lm_bus_probe,
-+ .remove = lm_bus_remove,
-+};
-+
-+static int __init lm_init(void)
-+{
-+ return bus_register(&lm_bustype);
-+}
-+
-+postcore_initcall(lm_init);
-+
-+int lm_driver_register(struct lm_driver *drv)
-+{
-+ drv->drv.bus = &lm_bustype;
-+ return driver_register(&drv->drv);
-+}
-+
-+void lm_driver_unregister(struct lm_driver *drv)
-+{
-+ driver_unregister(&drv->drv);
-+}
-+
-+static void lm_device_release(struct device *dev)
-+{
-+ struct lm_device *d = to_lm_device(dev);
-+
-+ kfree(d);
-+}
-+
-+int lm_device_register(struct lm_device *dev)
-+{
-+ int ret;
-+
-+ dev->dev.release = lm_device_release;
-+ dev->dev.bus = &lm_bustype;
-+
-+ ret = dev_set_name(&dev->dev, "lm%d", dev->id);
-+ if (ret)
-+ return ret;
-+ dev->resource.name = dev_name(&dev->dev);
-+
-+ ret = request_resource(&iomem_resource, &dev->resource);
-+ if (ret == 0) {
-+ ret = device_register(&dev->dev);
-+ if (ret)
-+ release_resource(&dev->resource);
-+ }
-+ return ret;
-+}
-+
-+EXPORT_SYMBOL(lm_driver_register);
-+EXPORT_SYMBOL(lm_driver_unregister);
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/localtimer.c
-@@ -0,0 +1,26 @@
-+/*
-+ * linux/arch/arm/mach-cns3xxx/localtimer.c
-+ *
-+ * Copyright (C) 2002 ARM Ltd.
-+ * All Rights Reserved
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/init.h>
-+#include <linux/smp.h>
-+#include <linux/clockchips.h>
-+
-+#include <asm/irq.h>
-+#include <asm/smp_twd.h>
-+#include <asm/localtimer.h>
-+
-+/*
-+ * Setup the local clock events for a CPU.
-+ */
-+void __cpuinit local_timer_setup(struct clock_event_device *evt)
-+{
-+ evt->irq = IRQ_LOCALTIMER;
-+ twd_timer_setup(evt);
-+}
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -0,0 +1,14 @@
-+#
-+# Makefile for the linux kernel.
-+#
-+
-+obj-y := core.o lm.o
-+obj-$(CONFIG_MACH_GW2388) += laguna-setup.o
-+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
-+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
-+obj-$(CONFIG_PCIEPORTBUS) += pcie.o
-+obj-$(CONFIG_CNS3XXX_RAID) += rdma.o
-+obj-$(CONFIG_CNS3XXX_DMAC) += dmac.o
-+obj-$(CONFIG_CNS3XXX_PM_API) += pm.o
-+
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/Makefile.boot
-@@ -0,0 +1,4 @@
-+ zreladdr-y := 0x00008000
-+params_phys-y := 0x00000100
-+initrd_phys-y := 0x00C00000
-+kernel_phys-y := 0x00600000
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/platsmp.c
-@@ -0,0 +1,220 @@
-+/*
-+ * linux/arch/arm/mach-cns3xxx/platsmp.c
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ * Copyright (C) 2002 ARM Ltd.
-+ * All Rights Reserved
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/jiffies.h>
-+#include <linux/smp.h>
-+#include <linux/io.h>
-+
-+#include <asm/cacheflush.h>
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/localtimer.h>
-+
-+#include <asm/smp_scu.h>
-+
-+#include "core.h"
-+
-+extern void cns3xxx_secondary_startup(void);
-+
-+/*
-+ * control for which core is the next to come out of the secondary
-+ * boot "holding pen"
-+ */
-+volatile int __cpuinitdata pen_release = -1;
-+
-+static void __iomem *scu_base_addr(void)
-+{
-+ return (void __iomem *)(CNS3XXX_TC11MP_SCU_BASE_VIRT);
-+}
-+
-+static inline unsigned int get_core_count(void)
-+{
-+ void __iomem *scu_base = scu_base_addr();
-+ if (scu_base)
-+ return scu_get_core_count(scu_base);
-+ return 1;
-+}
-+
-+static DEFINE_SPINLOCK(boot_lock);
-+
-+void __cpuinit platform_secondary_init(unsigned int cpu)
-+{
-+ trace_hardirqs_off();
-+
-+ /*
-+ * if any interrupts are already enabled for the primary
-+ * core (e.g. timer irq), then they will not have been enabled
-+ * for us: do so
-+ */
-+ gic_cpu_init(0, (void __iomem *)(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT));
-+ set_interrupt_pri(1, 0); // set cache broadcast ipi to highest priority
-+
-+ /*
-+ * let the primary processor know we're out of the
-+ * pen, then head off into the C entry point
-+ */
-+ pen_release = -1;
-+ smp_wmb();
-+
-+ /*
-+ * Synchronise with the boot thread.
-+ */
-+ spin_lock(&boot_lock);
-+ spin_unlock(&boot_lock);
-+}
-+
-+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-+{
-+ unsigned long timeout;
-+
-+ /*
-+ * set synchronisation state between this boot processor
-+ * and the secondary one
-+ */
-+ spin_lock(&boot_lock);
-+
-+ /*
-+ * The secondary processor is waiting to be released from
-+ * the holding pen - release it, then wait for it to flag
-+ * that it has been released by resetting pen_release.
-+ *
-+ * Note that "pen_release" is the hardware CPU ID, whereas
-+ * "cpu" is Linux's internal ID.
-+ */
-+ pen_release = cpu;
-+ flush_cache_all();
-+
-+ /*
-+ * XXX
-+ *
-+ * This is a later addition to the booting protocol: the
-+ * bootMonitor now puts secondary cores into WFI, so
-+ * poke_milo() no longer gets the cores moving; we need
-+ * to send a soft interrupt to wake the secondary core.
-+ * Use smp_cross_call() for this, since there's little
-+ * point duplicating the code here
-+ */
-+ smp_cross_call(cpumask_of(cpu));
-+
-+ timeout = jiffies + (1 * HZ);
-+ while (time_before(jiffies, timeout)) {
-+ smp_rmb();
-+ if (pen_release == -1)
-+ break;
-+
-+ udelay(10);
-+ }
-+
-+ /*
-+ * now the secondary core is starting up let it run its
-+ * calibrations, then wait for it to finish
-+ */
-+ spin_unlock(&boot_lock);
-+
-+ return pen_release != -1 ? -ENOSYS : 0;
-+}
-+
-+static void __init poke_milo(void)
-+{
-+ /* nobody is to be released from the pen yet */
-+ pen_release = -1;
-+
-+ /* write the address of secondary startup into the general purpose register */
-+ __raw_writel(virt_to_phys(cns3xxx_secondary_startup), (void __iomem *)(0xFFF07000 + 0x0600));
-+
-+ mb();
-+}
-+
-+/*
-+ * Initialise the CPU possible map early - this describes the CPUs
-+ * which may be present or become present in the system.
-+ */
-+void __init smp_init_cpus(void)
-+{
-+ unsigned int i, ncores = get_core_count();
-+
-+ for (i = 0; i < ncores; i++)
-+ set_cpu_possible(i, true);
-+}
-+
-+void __init smp_prepare_cpus(unsigned int max_cpus)
-+{
-+ unsigned int ncores = get_core_count();
-+ unsigned int cpu = smp_processor_id();
-+ int i;
-+
-+ /* sanity check */
-+ if (ncores == 0) {
-+ printk(KERN_ERR
-+ "CNS3XXX: strange CM count of 0? Default to 1\n");
-+
-+ ncores = 1;
-+ }
-+
-+ if (ncores > NR_CPUS) {
-+ printk(KERN_WARNING
-+ "CNS3XXX: no. of cores (%d) greater than configured "
-+ "maximum of %d - clipping\n",
-+ ncores, NR_CPUS);
-+ ncores = NR_CPUS;
-+ }
-+
-+ smp_store_cpu_info(cpu);
-+
-+ /*
-+ * are we trying to boot more cores than exist?
-+ */
-+ if (max_cpus > ncores)
-+ max_cpus = ncores;
-+
-+ /*
-+ * Initialise the present map, which describes the set of CPUs
-+ * actually populated at the present time.
-+ */
-+ for (i = 0; i < max_cpus; i++)
-+ set_cpu_present(i, true);
-+
-+ /*
-+ * Initialise the SCU if there are more than one CPU and let
-+ * them know where to start. Note that, on modern versions of
-+ * MILO, the "poke" doesn't actually do anything until each
-+ * individual core is sent a soft interrupt to get it out of
-+ * WFI
-+ */
-+ if (max_cpus > 1) {
-+ /*
-+ * Enable the local timer or broadcast device for the
-+ * boot CPU, but only if we have more than one CPU.
-+ */
-+ percpu_timer_setup();
-+
-+ scu_enable(scu_base_addr());
-+ poke_milo();
-+ }
-+}
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/pm.c
-@@ -0,0 +1,476 @@
-+/******************************************************************************
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ *
-+ ******************************************************************************/
-+#include <linux/pm.h>
-+#include <linux/interrupt.h>
-+#include <mach/pm.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/proc_fs.h>
-+#include <linux/delay.h>
-+#include <mach/misc.h>
-+
-+/*
-+ * cns3xxx_pwr_clk_en - clock enable
-+ * @block: bitmap for peripheral
-+ */
-+void cns3xxx_pwr_clk_en(unsigned int block)
-+{
-+ PM_CLK_GATE_REG |= (block&PM_CLK_GATE_REG_MASK);
-+}
-+
-+/*
-+ * cns3xxx_pwr_soft_rst - software reset
-+ * @block: bitmap for peripheral
-+ */
-+void cns3xxx_pwr_soft_rst_force(unsigned int block)
-+{
-+ /* bit 0, 28, 29 => program low to reset,
-+ * the other else program low and then high
-+ */
-+ if (block & 0x30000001) {
-+ PM_SOFT_RST_REG &= ~(block&PM_SOFT_RST_REG_MASK);
-+ } else {
-+ PM_SOFT_RST_REG &= ~(block&PM_SOFT_RST_REG_MASK);
-+ PM_SOFT_RST_REG |= (block&PM_SOFT_RST_REG_MASK);
-+ }
-+}
-+
-+void cns3xxx_pwr_soft_rst(unsigned int block)
-+{
-+ static unsigned int soft_reset = 0;
-+
-+ if(soft_reset & block) {
-+ //Because SPI/I2C/GPIO use the same block, just only reset once...
-+ return;
-+ }
-+ else {
-+ soft_reset |= block;
-+ }
-+ cns3xxx_pwr_soft_rst_force(block);
-+}
-+
-+/*
-+ * void cns3xxx_pwr_lp_hs - lower power handshake
-+ * @dev: bitmap for device
-+ *
-+ */
-+void cns3xxx_lp_hs(unsigned int dev)
-+{
-+
-+ if (PM_HS_CFG_REG_MASK_SUPPORT & dev) {
-+ PM_HS_CFG_REG |= dev;
-+
-+ /* TODO: disable clock */
-+ }
-+}
-+
-+/*
-+ * cns3xxx_pwr_mode - change CPU power mode
-+ * @pwr_mode: CPU power mode
-+ * CNS3XXX_PWR_CPU_MODE_DFS, CNS3XXX_PWR_CPU_MODE_IDLE
-+ * CNS3XXX_PWR_CPU_MODE_HALT, CNS3XXX_PWR_CPU_MODE_DOZE
-+ * CNS3XXX_PWR_CPU_MODE_SLEEP, CNS3XXX_PWR_CPU_MODE_HIBERNATE
-+ */
-+static void cns3xxx_pwr_mode(unsigned int pwr_mode)
-+{
-+ if (CNS3XXX_PWR_CPU_MODE_HIBERNATE < pwr_mode) {
-+ return;
-+ }
-+
-+ PM_CLK_CTRL_REG &=
-+ ~(0x7<<PM_CLK_CTRL_REG_OFFSET_CPU_PWR_MODE);
-+ PM_CLK_CTRL_REG |=
-+ ((pwr_mode&0x7)<<PM_CLK_CTRL_REG_OFFSET_CPU_PWR_MODE);
-+};
-+
-+/* cns3xxx_pwr_power_up -
-+ * cns3xxx_pwr_power_down -
-+ * @dev_num: bitmap for functional block
-+ * CNS3XXX_PWR_PLL_PCIE_PHY1, CNS3XXX_PWR_PLL_PCIE_PHY0
-+ * CNS3XXX_PWR_PLL_SATA_PHY1, CNS3XXX_PWR_PLL_SATA_PHY0
-+ * CNS3XXX_PWR_PLL_USB_PHY1, CNS3XXX_PWR_PLL_USB_PHY0
-+ * CNS3XXX_PWR_PLL_I2SCD, CNS3XXX_PWR_PLL_I2S
-+ * CNS3XXX_PWR_PLL_LCD, CNS3XXX_PWR_PLL_USB
-+ * CNS3XXX_PWR_PLL_RGMII, CNS3XXX_PWR_PLL_ALL
-+ */
-+void cns3xxx_pwr_power_up(unsigned int dev_num)
-+{
-+ PM_PLL_HM_PD_CTRL_REG &= ~(dev_num & CNS3XXX_PWR_PLL_ALL);
-+
-+ /* TODO: wait for 300us for the PLL output clock locked */
-+};
-+
-+void cns3xxx_pwr_power_down(unsigned int dev_num)
-+{
-+ /* write '1' to power down */
-+ PM_PLL_HM_PD_CTRL_REG |= (dev_num & CNS3XXX_PWR_PLL_ALL);
-+};
-+
-+#if 0
-+/* cns3xxx_pwr_change_pll_ddr - change DDR2 frequency
-+ * @ddr_sel: DDR2 clock select
-+ * CNS3XXX_PWR_PLL_DDR2_200MHZ
-+ * CNS3XXX_PWR_PLL_DDR2_266MHZ
-+ * CNS3XXX_PWR_PLL_DDR2_333MHZ
-+ * CNS3XXX_PWR_PLL_DDR2_400MHZ
-+ */
-+void cns3xxx_pwr_change_pll_ddr(unsigned int ddr_sel)
-+{
-+ if (CNS3XXX_PWR_PLL_DDR2_400MHZ < ddr_sel) {
-+ return;
-+ }
-+
-+ PM_CLK_CTRL_REG &= ~(0x3 << PM_CLK_CTRL_REG_OFFSET_PLL_DDR2_SEL);
-+ PM_CLK_CTRL_REG |= (ddr_sel << PM_CLK_CTRL_REG_OFFSET_PLL_DDR2_SEL);
-+}
-+#endif
-+
-+#define GIC_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT+offset)))
-+
-+
-+/* Change CPU frequency and divider */
-+/*
-+ * cns3xxx_pwr_change_pll_cpu - change PLL CPU frequency
-+ * @cpu_sel: PLL CPU frequency
-+ * @div_sel: divider
-+ *
-+ * This feature requires that 2nd core is in WFI mode and L2 cache is disabled
-+ * Before calling this function, please make sure that L2 cache is not in use
-+ *
-+ */
-+void cns3xxx_pwr_change_cpu_clock(unsigned int cpu_sel, unsigned int div_sel)
-+{
-+ /* 1. Set PLL_CPU_SEL
-+ * 2. Set in DFS mode
-+ * 3. disable all interrupt except interrupt ID-32 (clkscale_intr)
-+ * 4. Let CPU enter into WFI state
-+ * 5. Wait PMU to change PLL_CPU and divider and wake up CPU
-+ */
-+ int old_cpu, old_div;
-+
-+
-+ /* sanity check */
-+ if ((CNS3XXX_PWR_PLL_CPU_700MHZ < cpu_sel)
-+ || (CNS3XXX_PWR_CPU_CLK_DIV_BY4 < div_sel)) {
-+ return;
-+ }
-+
-+ old_cpu = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) &0xf;
-+ old_div = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
-+
-+ if ((cpu_sel == old_cpu)
-+ && (div_sel == old_div)) {
-+ return;
-+ }
-+
-+ /* 1. Set PLL_CPU_SEL */
-+ PM_PLL_CPU_SEL(cpu_sel);
-+ PM_CPU_CLK_DIV(div_sel);
-+
-+ /* 2. Set in DFS mode */
-+ cns3xxx_pwr_mode(CNS3XXX_PWR_CPU_MODE_DFS);
-+
-+ /* 3. disable all interrupt except interrupt ID-32 (clkscale_intr) */
-+ /* disable all interrupt */
-+ GIC_REG_VALUE(0x184) = 0xffffffff;
-+ GIC_REG_VALUE(0x188) = 0xffffffff;
-+ /* enable interrupt id 32*/
-+ GIC_REG_VALUE(0x104) = 0x00000001;
-+ GIC_REG_VALUE(0x108) = 0x80000000;
-+
-+ /* 4. Let CPU enter into WFI state */
-+ asm volatile(
-+ "mov r0, #0\n"
-+ "mcr p15, 0, r0, c7, c0, 4\n"
-+ );
-+
-+
-+#if 0
-+ {
-+ int i;
-+ for (i=IRQ_CNS3XXX_PMU+1; i<IRQ_CNS3XXX_EXTERNAL_PIN0; i++) {
-+ enable_irq(i);
-+ }
-+ }
-+#else
-+ GIC_REG_VALUE(0x104) = 0xffffffff;
-+ GIC_REG_VALUE(0x108) = 0xffffffff;
-+#endif
-+
-+ {
-+ /* for timer, because CPU clock is changed */
-+ int pclk = (cns3xxx_cpu_clock() >> 3);
-+ *(volatile unsigned int *) (CNS3XXX_TIMER1_2_3_BASE_VIRT + TIMER1_AUTO_RELOAD_OFFSET)
-+ = pclk/15*0x25000;
-+ }
-+
-+}
-+
-+
-+/*
-+ * clock_out_sel - select clock source to ClkOut pin
-+ * This function just select pll_cpu to ClkOut pin,
-+ * we can measure the ClkOut frequency to make sure whether pll_cpu is change
-+ *
-+ */
-+void clock_out_sel(void)
-+{
-+
-+ int temp = PM_CLK_CTRL_REG;
-+ //MISC_GPIOB_PIN_ENABLE_REG |= (0x1 << 26); /* Set GPIOB26 to ClkOut*/
-+ /* debug purpose, use ext intr 1 and 2 to generate interrupt */
-+ //MISC_GPIOB_PIN_ENABLE_REG |= (0x1 << 27); /* Set GPIOB27 to external interrupt 2*/
-+ //MISC_GPIOB_PIN_ENABLE_REG |= (0x1 << 28); /* Set GPIOB28 to external interrupt 1*/
-+ /* select ClkOut source as pll_cpu_clk and ClkOut divider is by 16 */
-+ temp &=~(0x3 << 20);
-+ temp &=~(0xf << 16);
-+ temp |= (0x3 << 20);
-+ temp |= (0x1 << 16);
-+ PM_CLK_CTRL_REG = temp;
-+}
-+
-+void cns3xxx_wfi(void)
-+{
-+ mb();
-+ asm volatile(
-+ "mov r0, #0\n"
-+ "mcr p15, 0, r0, c7, c10, 4\n"
-+ "mcr p15, 0, r0, c7, c0, 4\n"
-+ );
-+}
-+
-+/*
-+ * cns3xxx_pwr_sleep -
-+ */
-+void cns3xxx_pwr_sleep(void)
-+{
-+ /* 1. Set in sleep mode
-+ * 2. disable all functional block
-+ * 3. make sure that all function block are in power off state
-+ * 4. power down all PLL
-+ * 5. Let CPU enter into WFI state
-+ * 6. Wait PMU to change PLL_CPU and divider and wake up CPU
-+ */
-+ int i, j, count = 0;
-+ /* 1. Set in SLEEP mode */
-+ cns3xxx_pwr_mode(CNS3XXX_PWR_CPU_MODE_SLEEP);
-+
-+ /* 2. disable all functional block */
-+ i = PM_CLK_GATE_REG;
-+ PM_CLK_GATE_REG = 0x0;
-+
-+ /* 3. make sure that all function block are in power off state */
-+ while (0x4 != PM_PWR_STA_REG) {
-+ count++;
-+ if (1000 == count) {
-+ count = PM_PWR_STA_REG;
-+ break;
-+ }
-+ };
-+
-+ /* 4. power down all PLL */
-+ j = PM_PLL_HM_PD_CTRL_REG;
-+ PM_PLL_HM_PD_CTRL_REG = 0x00003FFC;
-+
-+#if 0
-+ /* set DMC to low power hand shake */
-+ PM_HS_CFG_REG |= (0x1 << 2);
-+ /* disable DMC */
-+ PM_CLK_GATE_REG &= ~(0x1<<2);
-+#endif
-+
-+ /* set wake up interrupt source, use ext_intr1 to wake up*/
-+ PM_WU_CTRL0_REG = 0x0; PM_WU_CTRL1_REG = 0x40000000;
-+ //MISC_GPIOB_PIN_ENABLE_REG |= (0x1 << 27);
-+
-+ /* 5. Let CPU enter into WFI state */
-+ GIC_REG_VALUE(0x104) = 0x1; /* enable clock scaling interrupt */
-+ printk("<0>enter WFI\n");
-+ cns3xxx_wfi();
-+ PM_CLK_GATE_REG = i;
-+ PM_PLL_HM_PD_CTRL_REG = j;
-+ printk("<0>leave WFI\n");
-+ GIC_REG_VALUE(0x104) = 0xffffffff;
-+ GIC_REG_VALUE(0x108) = 0xffffffff;
-+ cns3xxx_pwr_mode(CNS3XXX_PWR_CPU_MODE_DFS);
-+}
-+
-+/*
-+ * cns3xxx_pwr_sleep_test - enter into sleep and won't be wake up
-+ */
-+void cns3xxx_pwr_sleep_test(void)
-+{
-+ int i, j, count = 0;
-+ /* 1. Set in SLEEP mode */
-+ cns3xxx_pwr_mode(CNS3XXX_PWR_CPU_MODE_SLEEP);
-+
-+ /* 2. disable all functional block */
-+ i = PM_CLK_GATE_REG;
-+ PM_CLK_GATE_REG = 0x0;
-+
-+ /* 3. make sure that all function block are in power off state */
-+ while (0x4 != PM_PWR_STA_REG) {
-+ count++;
-+ if (1000 == count) {
-+ count = PM_PWR_STA_REG;
-+ break;
-+ }
-+ };
-+ /* 4. power down all PLL */
-+ j = PM_PLL_HM_PD_CTRL_REG;
-+ PM_PLL_HM_PD_CTRL_REG = 0x00003FFC;
-+
-+ /* set wake up interrupt source, do nothing */
-+ PM_WU_CTRL0_REG = 0x0; PM_WU_CTRL1_REG = 0x00000000;
-+
-+ /* 5. Let CPU enter into WFI state */
-+ GIC_REG_VALUE(0x104) = 0x1; /* enable clock scaling interrupt */
-+ printk("<0>enter WFI\n");
-+ cns3xxx_wfi();
-+ PM_CLK_GATE_REG = i;
-+ PM_PLL_HM_PD_CTRL_REG = j;
-+ printk("<0>leave WFI, count 0x%.8x\n", count);
-+ GIC_REG_VALUE(0x104) = 0xffffffff;
-+ GIC_REG_VALUE(0x108) = 0xffffffff;
-+ cns3xxx_pwr_mode(CNS3XXX_PWR_CPU_MODE_DFS);
-+}
-+
-+/*
-+ * cns3xxx_pwr_doze -
-+ */
-+void cns3xxx_pwr_doze(void)
-+{
-+ /* 1. Set in doze mode */
-+ cns3xxx_pwr_mode(CNS3XXX_PWR_CPU_MODE_DOZE);
-+
-+
-+ /* set wake up interrupt source*/
-+ PM_WU_CTRL0_REG = 0x0; PM_WU_CTRL1_REG = 0x40000000;
-+ //MISC_GPIOB_PIN_ENABLE_REG |= (0x1 << 27);
-+
-+ /* 5. Let CPU enter into WFI state */
-+ GIC_REG_VALUE(0x104) = 0x1; /* enable clock scaling interrupt */
-+ printk("<0>enter WFI\n");
-+ cns3xxx_wfi();
-+ printk("<0>leave WFI\n");
-+ cns3xxx_pwr_mode(CNS3XXX_PWR_CPU_MODE_DFS);
-+}
-+
-+/*
-+ * cns3xxx_pwr_idle -
-+ * IDLE mode just turn off CPU clock.
-+ * L2 cache, peripheral, PLL, external DRAM and chip power are still on
-+ */
-+void cns3xxx_pwr_idle(void)
-+{
-+ /* 1. Set in IDLE mode */
-+ cns3xxx_pwr_mode(CNS3XXX_PWR_CPU_MODE_IDLE);
-+
-+#if 1
-+ /* disable all interrupt except interrupt ID-32 (clkscale_intr)
-+ *
-+ * CPU can be wake up by any interrupt here,
-+ * we disable all interrupt is just for testing
-+ */
-+
-+ /* disable all interrupt */
-+ GIC_REG_VALUE(0x184) = 0xffffffff; GIC_REG_VALUE(0x188) = 0xffffffff;
-+ /* enable interrupt id 32*/
-+ GIC_REG_VALUE(0x104) = 0x00000001; GIC_REG_VALUE(0x108) = 0x00000000;
-+#endif
-+
-+ /* set wake up interrupt source*/
-+ PM_WU_CTRL0_REG = 0x0; PM_WU_CTRL1_REG = 0x40000000;
-+ //MISC_GPIOB_PIN_ENABLE_REG |= (0x1 << 27);
-+
-+ /* 5. Let CPU enter into WFI state */
-+ printk("<0>enter WFI\n");
-+ cns3xxx_wfi();
-+ printk("<0>leave WFI\n");
-+ cns3xxx_pwr_mode(CNS3XXX_PWR_CPU_MODE_DFS);
-+ GIC_REG_VALUE(0x104) = 0xffffffff;
-+ GIC_REG_VALUE(0x108) = 0xffffffff;
-+}
-+
-+/*
-+ * cns3xxx_pwr_halt -
-+ * HALT mode just turn off CPU and L2 cache clock.
-+ * peripheral, PLL, external DRAM and chip power are still on
-+ */
-+
-+void cns3xxx_pwr_halt(void)
-+{
-+ /* 1. Set in HALT mode */
-+ cns3xxx_pwr_mode(CNS3XXX_PWR_CPU_MODE_HALT);
-+
-+ /*
-+ * CPU can be wake up by any interrupt here,
-+ * for test, we disable all interrupt except ID-32
-+ */
-+ /* disable all interrupt */
-+ GIC_REG_VALUE(0x184) = 0xffffffff; GIC_REG_VALUE(0x188) = 0xffffffff;
-+ /* enable interrupt id 32*/
-+ GIC_REG_VALUE(0x104) = 0x00000001; GIC_REG_VALUE(0x108) = 0x00000000;
-+
-+ /* set wake up interrupt source to trigger clock scaling interrupt */
-+ PM_WU_CTRL0_REG = 0x0; PM_WU_CTRL1_REG = 0x40000000;
-+ //MISC_GPIOB_PIN_ENABLE_REG |= (0x1 << 27);
-+
-+ /* 5. Let CPU enter into WFI state */
-+ cns3xxx_wfi();
-+ cns3xxx_pwr_mode(CNS3XXX_PWR_CPU_MODE_DFS);
-+ GIC_REG_VALUE(0x104) = 0xffffffff;
-+ GIC_REG_VALUE(0x108) = 0xffffffff;
-+}
-+
-+/*
-+ * cns3xxx_cpu_clock - return CPU/L2 clock
-+ * aclk: cpu clock/2
-+ * hclk: cpu clock/4
-+ * pclk: cpu clock/8
-+ */
-+int cns3xxx_cpu_clock(void)
-+{
-+#define CPU_BASE 300
-+ int cpu, cpu_sel, div_sel;
-+
-+ cpu_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
-+ div_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
-+
-+ cpu = (CPU_BASE + ((cpu_sel/3) * 100) + ((cpu_sel %3) *33)) >> div_sel;
-+ return cpu;
-+}
-+
-+static int __init cns3xxx_pmu_init(void)
-+{
-+ return 0;
-+}
-+
-+
-+EXPORT_SYMBOL(cns3xxx_pwr_power_up);
-+EXPORT_SYMBOL(cns3xxx_pwr_clk_en);
-+EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
-+EXPORT_SYMBOL(cns3xxx_pwr_soft_rst_force);
-+EXPORT_SYMBOL(cns3xxx_cpu_clock);
-+
-+module_init(cns3xxx_pmu_init);
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/rdma.c
-@@ -0,0 +1,901 @@
-+/*
-+ * rdma.c - CNS3XXX RAID-DMA h/w acceleration
-+ *
-+ * Revision History: arch/arm/mach-cns3xxx/ChangeLog.cns_raid.txt
-+ */
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/spinlock.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+#include <linux/wait.h>
-+#include <linux/list.h>
-+#include <linux/mm.h>
-+#include <linux/pagemap.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+#include <mach/irqs.h>
-+#include <linux/mempool.h>
-+#include <linux/dma-mapping.h>
-+
-+#include "rdma.h"
-+#include <mach/pm.h>
-+
-+int rdma_verbose;
-+u8 rdma_test_ptn[32] = {0};
-+unsigned int dma_timeout_jiffies;
-+mempool_t *rdma_sg_pool = NULL; /* pool */
-+rdma_chan_t *dma = NULL; /* dma channel */
-+
-+static DEFINE_SPINLOCK(process_lock);
-+
-+/* Debug Printk */
-+#define dprintk(x...) ((void)(rdma_verbose && printk(KERN_WARNING x)))
-+#define dump_regs(x) \
-+do { \
-+ dprintk("pa:%08x sg:%08x bp:%08x fp:%08x st:%08x qp:%08x sz:%08x\n", \
-+ *((x)->cregs->para), \
-+ *((x)->cregs->sgad), \
-+ *((x)->cregs->back), \
-+ *((x)->cregs->frnt), \
-+ *((x)->cregs->stat), \
-+ *((x)->cregs->qpar), \
-+ *((x)->cregs->blsz)); \
-+} while (0)
-+
-+
-+#define rdma_dmac_flush_range(start, bytes) \
-+ do { \
-+ dma_cache_maint(start, bytes, DMA_BIDIRECTIONAL); \
-+ } while (0);
-+
-+#define rdma_dmac_inv_range(start, bytes) \
-+ do { \
-+ dma_cache_maint(start, bytes, DMA_FROM_DEVICE); \
-+ } while (0);
-+
-+#define rdma_dmac_clean_range(start, bytes) \
-+ do { \
-+ dma_cache_maint(start, bytes, DMA_TO_DEVICE); \
-+ } while (0);
-+
-+
-+
-+extern void *acs_mempool_alloc(mempool_t *pool);
-+
-+/**
-+ * rdma_timeout_handle
-+ */
-+static void rdma_timeout_handle(rdma_chan_t *rdma)
-+{
-+ printk("%s: timeout handling\n", __FUNCTION__);
-+ spin_lock_irq(&process_lock);
-+
-+ if (!list_empty(&rdma->process_q)) {
-+ sg_t *sg_fin = list_entry(rdma->process_q.next, sg_t, lru);
-+ list_del_init(&sg_fin->lru);
-+ sg_fin->status = SG_STATUS_DONE;
-+ }
-+
-+ *(dma->cregs->para) = 0;
-+ *(dma->cregs->back) = rdma->q_first_phys;
-+ *(dma->cregs->frnt) = rdma->q_first_phys;
-+ flush_cache_all();
-+ spin_unlock_irq(&process_lock);
-+}
-+
-+/**
-+ * rdma_mempool_alloc - return a sg from pool
-+ * @gfp_mask: gfp flag
-+ *
-+ * Return:
-+ * sg table
-+ */
-+static void *rdma_sg_mempool_alloc(unsigned int gfp_mask)
-+{
-+ void *element;
-+ int exception_timeout = 30;
-+
-+repeat:
-+ element = acs_mempool_alloc(rdma_sg_pool);
-+ if (likely(element))
-+ return element;
-+
-+ if (!(gfp_mask & __GFP_WAIT)) {
-+ return NULL;
-+ } else {
-+ msleep(1000);
-+ exception_timeout--;
-+ WARN_ON(exception_timeout < 0); /* Thresh check, we should check or increase if any warning */
-+ goto repeat;
-+ }
-+}
-+
-+#define rdma_mempool_create(pool, name, size, min_nr, alloc_fn, free_fn, privp) \
-+do { \
-+ printk("%s: pre-allocating %s: %d*%d=%d\n", \
-+ __FUNCTION__, (name), (min_nr), (size), (min_nr) * (size)); \
-+ pool = mempool_create((min_nr), (mempool_alloc_t *)(alloc_fn), free_fn, (privp)); \
-+ if (!pool) \
-+ goto abort; \
-+} while(0);
-+
-+#define rdma_mempool_destroy(pool) \
-+do { \
-+ if (pool) \
-+ mempool_destroy(pool); \
-+} while(0);
-+
-+#define rdma_kfree_obj(obj) \
-+do { \
-+ if (obj) \
-+ kfree(obj); \
-+} while(0);
-+
-+/**
-+ * rdma_sg_prealloc_fn - sg mempool pre-allocation callback
-+ * @gfp_flags: GFP_ flags
-+ * @data: private data, reserved
-+ *
-+ * Return:
-+ * pre-alloc sg table
-+ */
-+static void *rdma_sg_prealloc_fn(int gfp_flags, void *data)
-+{
-+ sg_t *sg = NULL;
-+ sg = kzalloc(sizeof(sg_t), gfp_flags);
-+ INIT_LIST_HEAD(&sg->lru);
-+ init_waitqueue_head(&sg->wait);
-+ sg->status = SG_STATUS_FREE;
-+
-+ /* Remove Debug Message */
-+#if 0
-+ printk("%s: pre-allocating sg=0x%p, phy=0x%p\n",
-+ __FUNCTION__, (void *)sg, (void *)virt_to_phys(sg));
-+#endif
-+
-+ WARN_ON(!sg);
-+ return (void *)sg;
-+}
-+
-+/**
-+ * rdma_sg_deconstruct_fn - sg mempool de-allocation callback
-+ * @sg: sg elements
-+ * @data: private data, reserved
-+ */
-+static void rdma_sg_deconstruct_fn(void *sg, void *data)
-+{
-+ if (sg) {
-+ printk("%s: de-allocating sg=0x%p, phy=0x%p\n",
-+ __FUNCTION__, (void *)sg, (void *)virt_to_phys(sg));
-+ kfree(sg);
-+ }
-+ return;
-+}
-+
-+
-+
-+/*-------------------------------------------------------- */
-+/**
-+ * rdma_get_sg - alloc an SG
-+ * @dma: dma chan
-+ */
-+static sg_t *rdma_get_sg(rdma_chan_t *dma)
-+{
-+ sg_t *sg = (sg_t *)rdma_sg_mempool_alloc(GFP_KERNEL);
-+
-+ /*
-+ * No need to zero rest of un-used SG entries;
-+ * we detect the src+dst by parameter + sg, not by zero-valued sg.
-+ */
-+ // memzero(&(sg->entry[0]), SG_ENTRY_BYTES);
-+
-+ sg->status = SG_STATUS_ACQUIRED;
-+
-+ return sg;
-+}
-+
-+
-+/**
-+ * rdma_queue_sg - queue an SG, wait done and put it.
-+ * @dma: dma chan
-+ * @sg: sg
-+ * @q_para: parameter
-+ * @q_blsz: block size
-+ * @q_sgad: SG Addr
-+ * @sg_cnt: count of (src_cnt + dst_cnt)
-+ */
-+#define QUEUE_MODE
-+static void rdma_queue_sg(rdma_chan_t *rdma, sg_t *sg, u32 q_para, u32 q_blsz, u32 q_sgad, int sg_cnt)
-+{
-+ cmdq_t *this_virt = NULL;
-+
-+ spin_lock_irq(&process_lock);
-+
-+ sg->status = SG_STATUS_SCHEDULED;
-+ list_add_tail(&sg->lru, &rdma->process_q);
-+
-+ dump_regs(rdma);
-+
-+#ifdef QUEUE_MODE
-+ /* Setup BP */
-+ this_virt = (cmdq_t *)(phys_to_virt(*(rdma->cregs->back)));
-+ this_virt->parameter = q_para;
-+ this_virt->block_size = q_blsz;
-+ this_virt->sg_addr = q_sgad;
-+ this_virt->reserved = 0;
-+ dump_regs(rdma);
-+
-+ /* FP++ */
-+ *(rdma->cregs->frnt) = *(rdma->cregs->frnt) + 16;
-+ dump_regs(rdma);
-+
-+ /* FIXME */
-+ {
-+ void *sgp = (void *)sg;
-+ void *cqp = (void *)this_virt;
-+
-+ rdma_dmac_flush_range(sgp, (sg_cnt * sizeof(u64)));
-+ rdma_dmac_flush_range(cqp, sizeof(cmdq_t));
-+ }
-+
-+ /* Queue Enable */
-+ *(rdma->cregs->stat) = REG_STAT_CMD_QUEUE_ENABLE;
-+ dump_regs(rdma);
-+
-+#else
-+ *(dma->cregs->blsz) = q_blsz;
-+ *(rdma->cregs->sgad) = q_sgad;
-+ *(rdma->cregs->para) = q_para;
-+ dump_regs(rdma);
-+#endif /* QUEUE_MODE */
-+
-+ spin_unlock_irq(&process_lock);
-+ dump_regs(rdma);
-+
-+ wait_event_timeout(sg->wait,
-+ sg->status & (SG_STATUS_DONE | SG_STATUS_ERROR),
-+ dma_timeout_jiffies);
-+ dump_regs(rdma);
-+
-+ /* timed out */
-+ if (unlikely(sg->status & SG_STATUS_SCHEDULED)) {
-+ printk("%s: operation timeout\n", __FUNCTION__);
-+ rdma_timeout_handle(rdma);
-+ }
-+
-+ sg->status = SG_STATUS_FREE;
-+ mempool_free(sg, rdma_sg_pool);
-+ return;
-+}
-+
-+
-+#define R6_RECOV_PD 1
-+#define R6_RECOV_DD 2
-+#define R6_RECOV_DQ 3
-+/**
-+ * @src_no: source count
-+ * @bytes: len in bytes
-+ * @bh_ptr: srcs PA
-+ * @w1_dst: pd: P, dd: DD1, qd: DD
-+ * @w2_dst: pd: DD, dd: DD2, qd: Q
-+ * @pd_dd_qd: failed layout to recover
-+ * @w1_idx: idx of w1_dst
-+ * @w2_idx: idx of w2_dst
-+ * @src_idx: source index; utilize data index only.
-+ *
-+ * Desc:
-+ * Recover P+DD / DD1+DD2 / DD+Q from bh_ptr
-+ */
-+void do_cns_rdma_gfgen_pd_dd_dq(unsigned int src_no, unsigned int bytes,
-+ void **bh_ptr, void *w1_dst, void *w2_dst,
-+ int pd_dd_qd, unsigned int w1_idx, unsigned int w2_idx,
-+ unsigned int *src_idx)
-+{
-+ int i;
-+ sg_t *sg = NULL;
-+ u32 q_sgad, q_blsz, q_para;
-+
-+ /* clean src/dst */
-+ for (i=0; i<src_no; i++)
-+ {
-+ if (likely(bh_ptr[i])) {
-+ rdma_dmac_clean_range(bh_ptr[i], bytes);
-+ }
-+ else
-+ goto abort;
-+ }
-+ rdma_dmac_clean_range(w1_dst, bytes);
-+ rdma_dmac_clean_range(w2_dst, bytes);
-+
-+ sg = rdma_get_sg(dma);
-+
-+ /* Setup SG */
-+ switch(pd_dd_qd)
-+ {
-+
-+ case R6_RECOV_PD:
-+ /* dd...dQ -> PD */
-+ for (i=0; i<(src_no - 1); i++) {
-+ sg->entry[i] = (SG_ADDR_MASK & ((u64)virt_to_phys(bh_ptr[i])))
-+ | (SG_READ_IDX_MASK & ((u64)src_idx[i]) << SG_IDX_SHIFT)
-+ | (RWI_RD_D);
-+ }
-+ sg->entry[src_no-1] = (SG_ADDR_MASK & ((u64)virt_to_phys(bh_ptr[i])))
-+ | (RWI_RD_Q);
-+
-+ /* pd */
-+ sg->entry[src_no] = (SG_ADDR_MASK & ((u64)virt_to_phys(w1_dst))) | (RWI_W_P1);
-+ sg->entry[src_no+1] = (SG_ADDR_MASK & ((u64)virt_to_phys(w2_dst))) | (RWI_W_D2);
-+
-+ q_para = REG_PARA_ENABLE
-+ | REG_PARA_XFER_END
-+ | REG_PARA_CALC_P
-+ | (REG_PARA_FAULTY_DISKS_CNT * 2)
-+ | w2_idx * REG_PARA_FDISK_2_Q_IDX;
-+ break;
-+
-+ case R6_RECOV_DD:
-+ /* dd...PQ -> DD */
-+ for (i=0; i<(src_no - 2); i++) {
-+ sg->entry[i] = (SG_ADDR_MASK & ((u64)virt_to_phys(bh_ptr[i])))
-+ | (SG_READ_IDX_MASK & ((u64)src_idx[i]) << SG_IDX_SHIFT)
-+ | (RWI_RD_D);
-+ }
-+
-+ sg->entry[src_no-2] = (SG_ADDR_MASK & ((u64)virt_to_phys(bh_ptr[i])))
-+ | (RWI_RD_P);
-+ sg->entry[src_no-1] = (SG_ADDR_MASK & ((u64)virt_to_phys(bh_ptr[i+1])))
-+ | (RWI_RD_Q);
-+
-+ /* dd */
-+ sg->entry[src_no] = (SG_ADDR_MASK & ((u64)virt_to_phys(w1_dst))) | (RWI_W_D1);
-+ sg->entry[src_no+1] = (SG_ADDR_MASK & ((u64)virt_to_phys(w2_dst))) | (RWI_W_D2);
-+
-+ q_para = REG_PARA_ENABLE
-+ | REG_PARA_XFER_END
-+ | REG_PARA_CALC_DATA
-+ | (REG_PARA_FAULTY_DISKS_CNT * 2)
-+ | w1_idx * REG_PARA_FDISK_1_P_IDX
-+ | w2_idx * REG_PARA_FDISK_2_Q_IDX;
-+
-+ break;
-+
-+ case R6_RECOV_DQ:
-+ /* dd...dP -> DQ */
-+ for (i=0; i<(src_no - 1); i++) {
-+ sg->entry[i] = (SG_ADDR_MASK & ((u64)virt_to_phys(bh_ptr[i])))
-+ | (SG_READ_IDX_MASK & ((u64)src_idx[i]) << SG_IDX_SHIFT)
-+ | (RWI_RD_D);
-+ }
-+ sg->entry[src_no-1] = (SG_ADDR_MASK & ((u64)virt_to_phys(bh_ptr[i])))
-+ | (RWI_RD_P);
-+
-+ /* qd */
-+ sg->entry[src_no] = (SG_ADDR_MASK & ((u64)virt_to_phys(w1_dst))) | (RWI_W_D1);
-+ sg->entry[src_no+1] = (SG_ADDR_MASK & ((u64)virt_to_phys(w2_dst))) | (RWI_W_Q2);
-+
-+ q_para = REG_PARA_ENABLE
-+ | REG_PARA_XFER_END
-+ | REG_PARA_CALC_Q
-+ | (REG_PARA_FAULTY_DISKS_CNT * 2)
-+ | w1_idx * REG_PARA_FDISK_1_P_IDX;
-+ break;
-+
-+ default:
-+ BUG();
-+ break;
-+
-+ }
-+
-+ q_sgad = virt_to_phys(&(sg->entry[0]));
-+ q_blsz = bytes & REG_BLSZ_MASK;
-+
-+ if (unlikely(rdma_verbose)) {
-+ for (i=0; i<src_no; i++)
-+ printk("set-SG::SRC[%d] = 0x%016llx\n", i, sg->entry[i]);
-+ printk("set-SG::DST1ptr= 0x%016llx\n", sg->entry[src_no]);
-+ printk("set-SG::DST2ptr= 0x%016llx\n", sg->entry[src_no+1]);
-+ }
-+
-+ /* Queue SG */
-+ rdma_queue_sg(dma, sg, q_para, q_blsz, q_sgad, (src_no + 2));
-+
-+ /* Invalidate dst */
-+ rdma_dmac_inv_range(w1_dst, bytes);
-+ rdma_dmac_inv_range(w2_dst, bytes);
-+
-+abort:
-+ return;
-+}
-+
-+/**
-+ * @src_no: source count
-+ * @bytes: len in bytes
-+ * @bh_ptr: srcs PA
-+ * @p_dst: P dest PA
-+ * @q_dst: Q dest PA
-+ *
-+ * Desc:
-+ * p/q_dst = XOR/GFMUL(bh_ptr[0 ... src_no-1]), in Page Addr
-+ */
-+void do_cns_rdma_gfgen(unsigned int src_no, unsigned int bytes, void **bh_ptr,
-+ void *p_dst, void *q_dst) // u8 *gfmr
-+{
-+ int i;
-+ sg_t *sg = NULL;
-+ u32 q_sgad, q_blsz, q_para;
-+
-+ /* clean src/dst */
-+ for (i=0; i<src_no; i++)
-+ {
-+ if (likely(bh_ptr[i])) {
-+ rdma_dmac_clean_range(bh_ptr[i], bytes);
-+ }
-+ else
-+ goto abort;
-+ }
-+ rdma_dmac_clean_range(p_dst, bytes);
-+ rdma_dmac_clean_range(q_dst, bytes);
-+
-+ sg = rdma_get_sg(dma);
-+
-+ /* Setup SG::Read::SRC */
-+ for (i=0; i<src_no; i++) {
-+ /* Set addr, idx#, rw */
-+ sg->entry[i] = (SG_ADDR_MASK & ((u64)virt_to_phys(bh_ptr[i])))
-+ | (SG_READ_IDX_MASK & ((u64)i + 1) << SG_IDX_SHIFT)
-+ | (RWI_RD_D);
-+ }
-+
-+ /* Setup SG::Write::P1 + Q2 */
-+ sg->entry[src_no] = (SG_ADDR_MASK & ((u64)virt_to_phys(p_dst))) | (RWI_W_P1);
-+ sg->entry[src_no+1] = (SG_ADDR_MASK & ((u64)virt_to_phys(q_dst))) | (RWI_W_Q2);
-+
-+ /* Setup SGAD, BLSZ, PARAMETER */
-+ q_sgad = virt_to_phys(&(sg->entry[0]));
-+ q_blsz = bytes & REG_BLSZ_MASK;
-+ q_para = REG_PARA_ENABLE
-+ | REG_PARA_XFER_END
-+ | REG_PARA_CALC_PQ
-+ | (REG_PARA_FAULTY_DISKS_CNT * 2);
-+
-+ if (unlikely(rdma_verbose)) {
-+ for (i=0; i<src_no; i++)
-+ printk("set-SG::SRC[%d] = 0x%016llx\n", i, sg->entry[i]);
-+ printk("set-SG::DST1ptr= 0x%016llx\n", sg->entry[src_no]);
-+ printk("set-SG::DST2ptr= 0x%016llx\n", sg->entry[src_no+1]);
-+ }
-+
-+ /* Queue SG */
-+ rdma_queue_sg(dma, sg, q_para, q_blsz, q_sgad, (src_no + 2));
-+
-+ /* Invalidate dst */
-+ rdma_dmac_inv_range(p_dst, bytes);
-+ rdma_dmac_inv_range(q_dst, bytes);
-+
-+abort:
-+ return;
-+}
-+
-+/**
-+ * @src_no: source count
-+ * @bytes: len in bytes
-+ * @bh_ptr: srcs PA
-+ * @dst_ptr: dest PA
-+ *
-+ * Desc:
-+ * dst_ptr = XOR(bh_ptr[0 ... src_no-1]), in Page Addr
-+ */
-+void do_cns_rdma_xorgen(unsigned int src_no, unsigned int bytes, void **bh_ptr, void *dst_ptr)
-+{
-+ int i;
-+ sg_t *sg = NULL;
-+ u32 q_sgad, q_blsz, q_para;
-+
-+ /* clean src/dst */
-+ for (i=0; i<src_no; i++)
-+ {
-+ if (likely(bh_ptr[i])) {
-+ rdma_dmac_clean_range(bh_ptr[i], bytes);
-+ }
-+ else
-+ goto abort;
-+ }
-+ rdma_dmac_clean_range(dst_ptr, bytes);
-+
-+ sg = rdma_get_sg(dma);
-+
-+ /* Setup SG::Read::SRC */
-+ for (i=0; i<src_no; i++) {
-+ sg->entry[i] = (SG_ADDR_MASK & ((u64)virt_to_phys(bh_ptr[i])))
-+ | (SG_READ_IDX_MASK & ((u64)i + 1) << SG_IDX_SHIFT)
-+ | (RWI_RD_D);
-+ }
-+
-+ /* Setup SG::Write::P1 */
-+ sg->entry[src_no] = (SG_ADDR_MASK & ((u64)virt_to_phys(dst_ptr)))
-+ | (RWI_W_P1);
-+
-+ /* Setup SGAD, BLSZ, PARAMETER */
-+ q_sgad = virt_to_phys(&(sg->entry[0]));
-+ q_blsz = bytes & REG_BLSZ_MASK;
-+ q_para = REG_PARA_ENABLE
-+ | REG_PARA_XFER_END
-+ | REG_PARA_CALC_P
-+ | (REG_PARA_FAULTY_DISKS_CNT * 1);
-+
-+ if (unlikely(rdma_verbose)) {
-+ for (i=0; i<src_no; i++)
-+ printk("set-SG::SRC[%d] = 0x%016llx\n", i, sg->entry[i]);
-+ printk("set-SG::DST1ptr= 0x%016llx\n", sg->entry[src_no]);
-+ }
-+
-+ /* Queue SG */
-+ rdma_queue_sg(dma, sg, q_para, q_blsz, q_sgad, (src_no + 1));
-+
-+ /* Invalidate dst */
-+ rdma_dmac_inv_range(dst_ptr, bytes);
-+
-+abort:
-+ return;
-+}
-+
-+
-+/**
-+ * rdma_isr - rdma isr
-+ * @irq: irq#
-+ * @dev_id: private data
-+ */
-+static irqreturn_t rdma_isr(int irq, void *dev_id)
-+{
-+ unsigned long flags;
-+ rdma_chan_t *this_dma = (rdma_chan_t *)dev_id;
-+
-+ /* Make sure the INT is for us */
-+ if (unlikely(dma != this_dma))
-+ {
-+ printk(KERN_ERR "Unexpected Interrupt, irq=%d, dma=%p, dev_id=%p\n", irq, dma, dev_id);
-+ return IRQ_NONE;
-+ }
-+
-+ dprintk("%s: pstat=0x%08x\n", __FUNCTION__, *(this_dma->cregs->stat));
-+
-+ spin_lock_irqsave(&process_lock, flags);
-+
-+ /* clear */
-+ *(this_dma->cregs->stat) = REG_STAT_XFER_COMPLETE | REG_STAT_INTERRUPT_FLAG;
-+
-+ if (!list_empty(&this_dma->process_q)) {
-+ sg_t *sg_fin = list_entry(this_dma->process_q.next, sg_t, lru);
-+
-+ BUG_ON(!(sg_fin->status & SG_STATUS_SCHEDULED));
-+
-+ list_del_init(&sg_fin->lru);
-+ sg_fin->status = SG_STATUS_DONE; // TODO: slave/decoder error handling
-+
-+ /* FP rewind */
-+ if (*(dma->cregs->frnt) == this_dma->q_last_phys) {
-+ *(dma->cregs->back) = this_dma->q_first_phys;
-+ *(dma->cregs->frnt) = this_dma->q_first_phys;
-+ }
-+
-+ wake_up(&sg_fin->wait);
-+ }
-+ spin_unlock_irqrestore(&process_lock, flags);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/**
-+ * test_show - show unit test result
-+ */
-+static void test_show(void **src, unsigned int bytes, void *p, void *q, unsigned int src_cnt, int stage)
-+{
-+ int i;
-+ char *buf;
-+
-+ for (i=0; i<src_cnt; i++) {
-+ buf = (char *)src[i];
-+ printk("SRC[%d]-stage=%d: %02x %02x %02x %02x %02x %02x %02x %02x %02x, phys=%lx\n",
-+ i, stage,
-+ buf[0], buf[1], buf[16], buf[64],
-+ buf[bytes/16], buf[bytes/8], buf[bytes/4], buf[bytes/2], buf[bytes-1],
-+ virt_to_phys(src[i]));
-+ }
-+
-+ buf = (char *)p;
-+ printk("P-stage=%d: %02x %02x %02x %02x %02x %02x %02x %02x %02x, phys=%lx\n", stage,
-+ buf[0], buf[1], buf[16], buf[64],
-+ buf[bytes/16], buf[bytes/8], buf[bytes/4], buf[bytes/2], buf[bytes-1],
-+ virt_to_phys(p));
-+
-+ buf = (char *)q;
-+ printk("Q-stage=%d: %02x %02x %02x %02x %02x %02x %02x %02x %02x, phys=%lx\n", stage,
-+ buf[0], buf[1], buf[16], buf[64],
-+ buf[bytes/16], buf[bytes/8], buf[bytes/4], buf[bytes/2], buf[bytes-1],
-+ virt_to_phys(q));
-+}
-+
-+/**
-+ * rdma_unit_test - unit tset invoked by sysfs
-+ * @action: test item
-+ * @src_cnt: how many srcs
-+ * @bytes: length
-+ *
-+ * Desc:
-+ * Unit Test
-+ */
-+void rdma_unit_test(int action, unsigned int src_cnt, unsigned int bytes)
-+{
-+ int i, cnt;
-+ void *src_ptrs[MAX_ENTRIES_PER_SG];
-+ void *p_dst, *q_dst;
-+ unsigned int w1_idx, w2_idx;
-+ unsigned int read_idx[32] = {0};
-+
-+ /*
-+ * The lx330 demo board has only 256MB installed,
-+ * we'd be careful.
-+ */
-+ if (src_cnt >= (MAX_ENTRIES_PER_SG - 2))
-+ src_cnt = MAX_ENTRIES_PER_SG - 2;
-+
-+ if (src_cnt < 2)
-+ src_cnt = 2;
-+
-+ if (bytes > 65536)
-+ bytes = 65536;
-+
-+ if (bytes < 4096)
-+ bytes = 4096;
-+
-+ for (i = 0; i < MAX_ENTRIES_PER_SG; i++) {
-+ if (i < src_cnt) {
-+ src_ptrs[i] = kmalloc(bytes, GFP_KERNEL);
-+ } else {
-+ src_ptrs[i] = NULL;
-+ }
-+ }
-+ p_dst = kmalloc(bytes, GFP_KERNEL);
-+ q_dst = kmalloc(bytes, GFP_KERNEL);
-+
-+ printk("%s: ACTION=%d, src_cnt=%u, bytes=%u p/w1=0x%p, q/w2=0x%p\n",
-+ __FUNCTION__, action, src_cnt, bytes, p_dst, q_dst);
-+
-+ /* Shuffle the src and dst */
-+ for (i = 0; i < src_cnt; i++) {
-+ if (rdma_test_ptn[0] == 0) {
-+ memset(src_ptrs[i], (jiffies % 240)+1, bytes);
-+ msleep(10 + 10 * i);
-+ } else {
-+ memset(src_ptrs[i], rdma_test_ptn[i], bytes);
-+ }
-+ }
-+ memset(p_dst, 0xff, bytes);
-+ memset(q_dst, 0xff, bytes);
-+
-+ // flush_cache_all();
-+ test_show(src_ptrs, bytes, p_dst, q_dst, src_cnt, 1);
-+
-+ switch (action)
-+ {
-+ /* P */
-+ case 1:
-+ printk("\n%s: XORgen\n\n", __FUNCTION__);
-+ do_cns_rdma_xorgen(src_cnt, bytes, src_ptrs, p_dst);
-+ break;
-+
-+ /* PQ */
-+ case 2:
-+ printk("\n%s: PQgen\n\n", __FUNCTION__);
-+ do_cns_rdma_gfgen(src_cnt, bytes, src_ptrs, p_dst, q_dst);
-+ break;
-+
-+ /* PD */
-+ case 3:
-+ w1_idx = src_cnt + 1;
-+ w2_idx = 1;
-+ cnt = 0;
-+
-+ printk("read_idx: ");
-+ for (i=1; i<=(src_cnt+2); i++)
-+ if (i != w1_idx && i != w2_idx) {
-+ read_idx[cnt] = i;
-+ printk("%d ", i);
-+ cnt++;
-+ }
-+ printk("\n%s: PDgen w1/w2_idx=%u/%u\n\n", __FUNCTION__, w1_idx, w2_idx);
-+ do_cns_rdma_gfgen_pd_dd_dq(src_cnt, bytes, src_ptrs, p_dst, q_dst,
-+ R6_RECOV_PD, w1_idx, w2_idx, read_idx);
-+ break;
-+
-+ /* DD */
-+ case 4:
-+ w1_idx = 1;
-+ w2_idx = 2;
-+ cnt = 0;
-+
-+ printk("read_idx: ");
-+ for (i=1; i<=(src_cnt+2); i++)
-+ if (i != w1_idx && i != w2_idx) {
-+ read_idx[cnt] = i;
-+ printk("%d ", i);
-+ cnt++;
-+ }
-+ printk("\n%s: DDgen w1/w2_idx=%u/%u\n\n", __FUNCTION__, w1_idx, w2_idx);
-+ do_cns_rdma_gfgen_pd_dd_dq(src_cnt, bytes, src_ptrs, p_dst, q_dst,
-+ R6_RECOV_DD, w1_idx, w2_idx, read_idx);
-+ break;
-+
-+ /* DQ */
-+ case 5:
-+ w1_idx = 1;
-+ w2_idx = src_cnt + 2;
-+ cnt = 0;
-+
-+ printk("read_idx: ");
-+ for (i=1; i<=(src_cnt+2); i++)
-+ if (i != w1_idx && i != w2_idx) {
-+ read_idx[cnt] = i;
-+ printk("%d ", i);
-+ cnt++;
-+ }
-+ printk("\n%s: DQgen w1/w2_idx=%u/%u\n\n", __FUNCTION__, w1_idx, w2_idx);
-+ do_cns_rdma_gfgen_pd_dd_dq(src_cnt, bytes, src_ptrs, p_dst, q_dst,
-+ R6_RECOV_DQ, w1_idx, w2_idx, read_idx);
-+ break;
-+
-+ /* Verbose */
-+ case 9999:
-+ rdma_verbose = (rdma_verbose == 1 ? 0 : 1);
-+ printk("\n%s: Setup verbose mode => %d\n\n", __FUNCTION__, rdma_verbose);
-+ break;
-+
-+ /*
-+ * SRC Pattern Assign
-+ * e.g. 0x00000000 <-- do not assign
-+ * e.g. 0xbbccddee <-- 4 src: bb cc dd ee
-+ */
-+ default:
-+ rdma_test_ptn[0] = (u8)(action >> 24 & 0x000000FF);
-+ rdma_test_ptn[1] = (u8)(action >> 16 & 0x000000FF);
-+ rdma_test_ptn[2] = (u8)(action >> 8 & 0x000000FF);
-+ rdma_test_ptn[3] = (u8)(action & 0x000000FF);
-+
-+ printk("\n%s: Setup src test pattern => 0x%02x %02x %02x %02x\n\n", __FUNCTION__,
-+ rdma_test_ptn[0],
-+ rdma_test_ptn[1],
-+ rdma_test_ptn[2],
-+ rdma_test_ptn[3]);
-+ break;
-+ }
-+
-+ // flush_cache_all();
-+ test_show(src_ptrs, bytes, p_dst, q_dst, src_cnt, 2);
-+
-+ for (i = 0; i < MAX_ENTRIES_PER_SG; i++) {
-+ rdma_kfree_obj(src_ptrs[i]);
-+ }
-+ rdma_kfree_obj(p_dst);
-+ rdma_kfree_obj(q_dst);
-+
-+}
-+
-+void cns_rdma_hw_init(void){
-+
-+ cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_RAID);
-+ cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_RAID);
-+}
-+
-+/**
-+ * cns_rdma_init - module init
-+ */
-+int __init cns_rdma_init(void)
-+{
-+ int err = 0;
-+
-+ printk("%s: start\n", __FUNCTION__);
-+
-+ cns_rdma_hw_init();
-+
-+ rdma_test_ptn[0] = 0;
-+ rdma_verbose = 0;
-+ dma_timeout_jiffies = HZ;
-+
-+ /* DMA chan */
-+ dma = (rdma_chan_t *) kzalloc(sizeof(rdma_chan_t), GFP_KERNEL);
-+ if (dma == NULL)
-+ goto abort;
-+
-+ INIT_LIST_HEAD(&(dma->process_q));
-+
-+ //static DEFINE_SPINLOCK(dma->process_lock);
-+ dma->irq = IRQ_CNS3XXX_RAID;
-+ dma->irq_str = "CNS3XXX RAID acceleration";
-+ dma->cregs = NULL;
-+ dma->q_virt = NULL;
-+
-+ /* control register */
-+ dma->cregs = (struct ctrl_regs *) kzalloc(sizeof(struct ctrl_regs) + GENERIC_ALIGN, GFP_KERNEL);
-+ dma->cregs = (struct ctrl_regs *) (((u32) dma->cregs & GENERIC_ALIGN_MASK) + GENERIC_ALIGN);
-+
-+ if (dma->cregs == NULL)
-+ goto abort;
-+
-+ printk("%s: reg1: virt=0x%p\n",
-+ __FUNCTION__, (void *)dma->cregs);
-+
-+ dma->cregs->para = RDMA_REGS_VIRT(REG_PARA_OFFSET);
-+ dma->cregs->blsz = RDMA_REGS_VIRT(REG_BLSZ_OFFSET);
-+ dma->cregs->sgad = RDMA_REGS_VIRT(REG_SGAD_OFFSET);
-+ dma->cregs->stat = RDMA_REGS_VIRT(REG_STAT_OFFSET);
-+ dma->cregs->frnt = RDMA_REGS_VIRT(REG_FRNT_OFFSET);
-+ dma->cregs->back = RDMA_REGS_VIRT(REG_BACK_OFFSET);
-+ dma->cregs->qpar = RDMA_REGS_VIRT(REG_QPAR_OFFSET);
-+
-+ /* Pre-allocate S/G table */
-+ rdma_mempool_create(rdma_sg_pool, "rdma_sg", sizeof(sg_t),
-+ MAX_SG, rdma_sg_prealloc_fn, rdma_sg_deconstruct_fn, NULL);
-+
-+ /* Pre-allocate Queue Cmds */
-+ dma->q_virt = (cmdq_t *) kzalloc(sizeof(cmdq_t) * CURR_Q_DEPTH + CURR_Q_DEPTH_ALIGN, GFP_KERNEL);
-+ dma->q_virt = (cmdq_t *) (((u32) dma->q_virt & CURR_Q_DEPTH_ALIGN_MASK) + CURR_Q_DEPTH_ALIGN);
-+
-+ if (dma->q_virt == NULL)
-+ goto abort;
-+
-+ dma->q_first_phys = virt_to_phys((void *)dma->q_virt);
-+ dma->q_last_phys = dma->q_first_phys + sizeof(cmdq_t) * (CURR_Q_DEPTH - 1);
-+
-+ printk("%s: q1: virt=0x%p, phy=0x%x -> 0x%x\n",
-+ __FUNCTION__, (void *)dma->q_virt, dma->q_first_phys, dma->q_last_phys);
-+
-+ *(dma->cregs->qpar) = REG_QPAR_DEPTH_32;
-+ *(dma->cregs->back) = dma->q_first_phys;
-+ *(dma->cregs->frnt) = dma->q_first_phys;
-+
-+ /* Register IRQ */
-+ err = request_irq(dma->irq, rdma_isr, 0, dma->irq_str, dma);
-+ if (err) {
-+ printk("%s: request irq failed\n", __FUNCTION__);
-+ goto abort;
-+ }
-+
-+ /* Clear 31 & 0 */
-+ *(dma->cregs->stat) = REG_STAT_INTERRUPT_FLAG;
-+
-+ err = 0;
-+ goto done;
-+
-+abort:
-+ rdma_mempool_destroy(rdma_sg_pool);
-+ rdma_kfree_obj(dma->cregs);
-+ rdma_kfree_obj(dma);
-+
-+
-+done:
-+ printk("%s: done, err=%d\n", __FUNCTION__, err);
-+ return err;
-+}
-+
-+/**
-+ * cns_rdma_exit - module exit
-+ */
-+void cns_rdma_exit(void)
-+{
-+ printk("%s: start\n", __FUNCTION__);
-+
-+ rdma_mempool_destroy(rdma_sg_pool);
-+ rdma_kfree_obj(dma->cregs);
-+ rdma_kfree_obj(dma);
-+ printk("%s: done\n", __FUNCTION__);
-+}
-+
-+//module_init(cns_rdma_init);
-+//module_exit(cns_rdma_exit);
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/rdma.h
-@@ -0,0 +1,178 @@
-+/*
-+ * rdma.h - CNS3xxx hardware RAID acceleration
-+ */
-+#ifndef _CNS3XXX_RDMA_H_
-+#define _CNS3XXX_RDMA_H_
-+
-+#include <mach/hardware.h>
-+
-+#define RDMA_REGS_PHYS(x) ((u32)(CNS3XXX_RAID_BASE + (x)))
-+#define RDMA_REGS_VIRT(x) ((u32 volatile *)(CNS3XXX_RAID_BASE_VIRT + (x)))
-+#define RDMA_REGS_VALUE(x) (*((u32 volatile *)(CNS3XXX_RAID_BASE_VIRT + (x))))
-+
-+
-+#define GENERIC_ALIGN 0x8 /* 64-bits */
-+#define GENERIC_ALIGN_MASK 0xFFFFFFF8UL
-+#define QUEUE_DEPTH_ALIGN_MUL 0x10 /* 16 bytes; ALIGNMENT == QDEPTH * 16 bytes */
-+
-+
-+/* Register Offset */
-+#define REG_PARA_OFFSET 0x00UL /* Parameter */
-+#define REG_BLSZ_OFFSET 0x04UL /* Block Size */
-+#define REG_SGAD_OFFSET 0x08UL /* SG Address */
-+#define REG_STAT_OFFSET 0x0CUL /* Status */
-+#define REG_FRNT_OFFSET 0x10UL /* FP */
-+#define REG_BACK_OFFSET 0x14UL /* BP */
-+#define REG_QPAR_OFFSET 0x18UL /* Queue Parameter */
-+
-+
-+/* 0x00: PARA */
-+#define REG_PARA_ENABLE 0x80000000UL /* 31 */
-+#define REG_PARA_XFER_END 0x40000000UL /* 30 */
-+#define REG_PARA_MEMORY_WR_DISABLE 0x20000000UL /* 29 */
-+#define REG_PARA_FAULTY_DISKS_CNT 0x08000000UL /* 28:27 */
-+
-+#define REG_PARA_CALC 0x01000000UL /* 26:24 */
-+ #define REG_PARA_CALC_DATA 0x00000000UL
-+ #define REG_PARA_CALC_P 0x01000000UL
-+ #define REG_PARA_CALC_Q 0x02000000UL
-+ #define REG_PARA_CALC_R 0x04000000UL
-+ #define REG_PARA_CALC_PQ 0x03000000UL
-+ #define REG_PARA_CALC_PR 0x05000000UL
-+ #define REG_PARA_CALC_QR 0x06000000UL
-+ #define REG_PARA_CALC_PQR 0x07000000UL
-+
-+#define REG_PARA_FDISK_3_R_IDX 0x00010000UL /* 23:16 */
-+#define REG_PARA_FDISK_2_Q_IDX 0x00000100UL /* 15:8 */
-+#define REG_PARA_FDISK_1_P_IDX 0x00000001UL /* 7:0 */
-+
-+/* 0x04: BLSZ */
-+#define REG_BLSZ_SHIFT 3 /* 19:3 */
-+#define REG_BLSZ_MASK 0x000FFFF8UL /* N * 8bytes */
-+
-+/* 0x08: SGAD */
-+#define REG_SGAD_SHIFT 0
-+
-+/* 0x0C: STAT */
-+#define REG_STAT_XFER_COMPLETE 0x80000000UL /* 31 */
-+#define REG_STAT_SLAVE_ERROR 0x40000000UL /* 30 */
-+#define REG_STAT_DECODER_ERROR 0x20000000UL /* 29 */
-+#define REG_STAT_R_FLAG 0x00080000UL /* 19 */
-+#define REG_STAT_Q_FLAG 0x00040000UL /* 18 */
-+#define REG_STAT_P_FLAG 0x00020000UL /* 17 */
-+#define REG_STAT_CMD_QUEUE_ENABLE 0x00000002UL /* 1 */
-+#define REG_STAT_INTERRUPT_FLAG 0x00000001UL /* 0 */
-+
-+/* 0x10/14: FRNT/BACK */
-+#define REG_FRNT_SHIFT 0
-+#define REG_BACK_SHIFT 0
-+
-+/* 0x18: QPAR */
-+#define MAX_Q_DEPTH 256
-+#define REG_QPAR_DEPTH_256 0xFF
-+#define REG_QPAR_DEPTH_128 0x7F
-+#define REG_QPAR_DEPTH_64 0x3F
-+#define REG_QPAR_DEPTH_32 0x1F
-+#define REG_QPAR_DEPTH_16 0xF
-+#define REG_QPAR_DEPTH_8 0x7
-+#define REG_QPAR_DEPTH_4 0x3
-+#define REG_QPAR_DEPTH_2 0x1
-+
-+/* len = 32 */
-+#define CURR_Q_DEPTH (REG_QPAR_DEPTH_32 + 1)
-+#define CURR_Q_DEPTH_ALIGN ((CURR_Q_DEPTH) * (QUEUE_DEPTH_ALIGN_MUL)) /* 0x200 */
-+#define CURR_Q_DEPTH_ALIGN_MASK 0xFFFFFE00UL
-+
-+
-+#define MAX_SG 32 // cf. CURR_Q_DEPTH or MAX_Q_DEPTH
-+#define MAX_ENTRIES_PER_SG 32
-+
-+/* SG Table */
-+#define SG_ADDR_MASK 0x00000000FFFFFFFFULL
-+
-+#define SG_READ_IDX_MASK 0x000000FF00000000ULL
-+#define SG_IDX_SHIFT 32
-+
-+// ---------------------- 7654321076543210
-+#define SG_RW_MASK 0x00000F0000000000ULL
-+#define RWI_RD_D 0x0000000000000000ULL
-+#define RWI_RD_P 0x0000010000000000ULL
-+#define RWI_RD_Q 0x0000020000000000ULL
-+#define RWI_RD_R 0x0000030000000000ULL
-+#define RWI_W_D1 0x0000040000000000ULL
-+#define RWI_W_P1 0x0000050000000000ULL
-+#define RWI_W_Q1 0x0000060000000000ULL
-+#define RWI_W_R1 0x0000070000000000ULL
-+#define RWI_W_D2 0x0000080000000000ULL
-+#define RWI_W_P2 0x0000090000000000ULL
-+#define RWI_W_Q2 0x00000A0000000000ULL
-+#define RWI_W_R2 0x00000B0000000000ULL
-+#define RWI_W_D3 0x00000C0000000000ULL
-+#define RWI_W_P3 0x00000D0000000000ULL
-+#define RWI_W_Q3 0x00000E0000000000ULL
-+#define RWI_W_R3 0x00000F0000000000ULL
-+
-+
-+#define SG_STATUS_FREE 0x00000001UL
-+#define SG_STATUS_ACQUIRED 0x00000002UL
-+#define SG_STATUS_SCHEDULED 0x00000004UL
-+#define SG_STATUS_DONE 0x00000008UL
-+#define SG_STATUS_ERROR 0x00000010UL
-+
-+#define SG_ENTRY_BYTES (8 * MAX_ENTRIES_PER_SG)
-+
-+typedef struct rdma_sgtable sg_t;
-+struct rdma_sgtable {
-+ u64 entry[MAX_ENTRIES_PER_SG];
-+
-+ struct list_head lru; /* list_add_tail/list_del to/from process_q when schedule or isr */
-+ wait_queue_head_t wait;
-+
-+ u32 status;
-+};
-+
-+/* Command Queue: cmdq_t */
-+typedef struct rdma_cmdq cmdq_t;
-+struct rdma_cmdq {
-+ volatile u32 parameter;
-+ volatile u32 block_size;
-+ volatile u32 sg_addr;
-+ volatile u32 reserved;
-+};
-+
-+struct ctrl_regs {
-+ volatile u32 *para;
-+ volatile u32 *blsz;
-+ volatile u32 *sgad;
-+ volatile u32 *stat;
-+ volatile u32 *frnt;
-+ volatile u32 *back;
-+ volatile u32 *qpar;
-+};
-+
-+/* channel */
-+#define RDMA_CHANNEL_COUNT 1
-+typedef struct rdma_channel rdma_chan_t;
-+struct rdma_channel
-+{
-+ struct list_head process_q;
-+ spinlock_t process_lock; /* process queue lock */
-+
-+ int irq;
-+ const char *irq_str;
-+
-+ /* cmd queue start address */
-+ volatile cmdq_t *q_virt;
-+ volatile u32 q_first_phys;
-+ volatile u32 q_last_phys;
-+
-+ /* control regs */
-+ struct ctrl_regs *cregs;
-+
-+ // wait_queue_head_t wait;
-+};
-+
-+int __init cns_rdma_init(void);
-+
-+#endif
-+
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -146,6 +146,7 @@ machine-$(CONFIG_ARCH_ORION5X) := orion
- machine-$(CONFIG_ARCH_PNX4008) := pnx4008
- machine-$(CONFIG_ARCH_PXA) := pxa
- machine-$(CONFIG_ARCH_REALVIEW) := realview
-+machine-$(CONFIG_ARCH_CNS3XXX) := cns3xxx
- machine-$(CONFIG_ARCH_RPC) := rpc
- machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
- machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
---- /dev/null
-+++ b/arch/arm/mm/cache-l2cc.c
-@@ -0,0 +1,218 @@
-+/*******************************************************************************
-+ *
-+ * arch/arm/mm/cache-l2cc.c - L2 cache controller support
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ *
-+ ******************************************************************************/
-+
-+#include <linux/init.h>
-+#include <linux/spinlock.h>
-+
-+#include <asm/cacheflush.h>
-+#include <asm/io.h>
-+#include <asm/hardware/cache-l2cc.h>
-+
-+#define CACHE_LINE_SIZE 32
-+
-+static void __iomem *cns3xxx_l2_base;
-+static DEFINE_SPINLOCK(cns3xxx_l2_lock);
-+
-+static inline void cache_wait(void __iomem *reg, unsigned long mask)
-+{
-+#ifndef CONFIG_L2CC_NO_WAIT
-+ /* wait for the operation to complete */
-+ while (readl(reg) & mask);
-+#endif
-+}
-+
-+static inline void sync_writel(unsigned long val, unsigned long reg,
-+ unsigned long complete_mask)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&cns3xxx_l2_lock, flags);
-+ writel(val, cns3xxx_l2_base + reg);
-+ /* wait for the operation to complete */
-+ while (readl(cns3xxx_l2_base + reg) & complete_mask)
-+ ;
-+ spin_unlock_irqrestore(&cns3xxx_l2_lock, flags);
-+}
-+
-+static inline void cache_sync(void)
-+{
-+ sync_writel(0, L2CC_CACHE_SYNC, 1);
-+}
-+
-+static inline void cns3xxx_l2_inv_all(void)
-+{
-+ /* invalidate all ways */
-+ sync_writel(0xffff, L2CC_INV_WAY, 0xffff);
-+ cache_sync();
-+}
-+
-+static void cns3xxx_l2_inv_range(unsigned long start, unsigned long end)
-+{
-+ unsigned long addr;
-+
-+ if (start & (CACHE_LINE_SIZE - 1)) {
-+ start &= ~(CACHE_LINE_SIZE - 1);
-+ writel(start, cns3xxx_l2_base + L2CC_CLEAN_INV_LINE_PA);
-+ start += CACHE_LINE_SIZE;
-+ }
-+
-+ if (end & (CACHE_LINE_SIZE - 1)) {
-+ end &= ~(CACHE_LINE_SIZE - 1);
-+ writel(end, cns3xxx_l2_base + L2CC_CLEAN_INV_LINE_PA);
-+ }
-+
-+ for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
-+ writel(addr, cns3xxx_l2_base + L2CC_INV_LINE_PA);
-+
-+ cache_sync();
-+}
-+
-+static void cns3xxx_l2_clean_range(unsigned long start, unsigned long end)
-+{
-+ unsigned long addr;
-+
-+ start &= ~(CACHE_LINE_SIZE - 1);
-+ for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
-+ writel(addr, cns3xxx_l2_base + L2CC_CLEAN_LINE_PA);
-+
-+ cache_wait(cns3xxx_l2_base + L2CC_CLEAN_LINE_PA, 1);
-+ cache_sync();
-+}
-+
-+static void cns3xxx_l2_flush_range(unsigned long start, unsigned long end)
-+{
-+ unsigned long addr;
-+
-+ start &= ~(CACHE_LINE_SIZE - 1);
-+ for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
-+ writel(addr, cns3xxx_l2_base + L2CC_CLEAN_INV_LINE_PA);
-+
-+ cache_wait(cns3xxx_l2_base + L2CC_CLEAN_INV_LINE_PA, 1);
-+ cache_sync();
-+}
-+
-+void __init l2cc_init(void __iomem *base)
-+{
-+ __u32 aux, prefetch, tag, data;
-+
-+ printk(KERN_INFO "Initializing CNS3XXX L2 cache controller... ");
-+
-+ cns3xxx_l2_base = base;
-+
-+ /* disable L2CC */
-+ writel(0, cns3xxx_l2_base + L2CC_CTRL);
-+
-+ /*
-+ * Auxiliary control register
-+ *
-+ * bit[22] - shared attribute internally ignored
-+ * bit[21] - parity enabled
-+ * bit[20] -
-+ * bit[19:17] - 32kB way size
-+ * bit[16] - way associative
-+ * bit[12] - exclusive cache disabled
-+ *
-+ */
-+ aux = readl(cns3xxx_l2_base + L2CC_AUX_CTRL);
-+ aux &= 0xfe000fff;
-+#ifdef CONFIG_CACHE_L2_I_PREFETCH
-+ aux |= 0x20000000; /* bit[29]: Instruction prefetching enable, bit[29]: Data prefetching enable */
-+#endif
-+#ifdef CONFIG_CACHE_L2_D_PREFETCH
-+ aux |= 0x10000000; /* bit[28]: Instruction prefetching enable, bit[28]: Data prefetching enable */
-+#endif
-+ aux |= 0x00540000; /* ...010..., 32KB, 8-way, Parity Disable*/
-+ writel(aux, cns3xxx_l2_base + L2CC_AUX_CTRL);
-+
-+ prefetch = readl(cns3xxx_l2_base + 0xF60);
-+ prefetch |= 0x00000008; /* prefetch offset, bit[4..0] */
-+#ifdef CONFIG_CACHE_L2_I_PREFETCH
-+ prefetch |= 0x20000000;
-+#endif
-+#ifdef CONFIG_CACHE_L2_D_PREFETCH
-+ prefetch |= 0x10000000;
-+#endif
-+ writel(prefetch, cns3xxx_l2_base + 0xF60);
-+
-+ /* Tag RAM Control register
-+ *
-+ * bit[10:8] - 1 cycle of write accesses latency
-+ * bit[6:4] - 1 cycle of read accesses latency
-+ * bit[3:0] - 1 cycle of setup latency
-+ *
-+ * 1 cycle of latency for setup, read and write accesses
-+ */
-+ tag = readl(cns3xxx_l2_base + L2CC_TAG_RAM_LATENCY_CTRL);
-+ tag &= 0xfffff888;
-+ tag |= 0x00000000;
-+ writel(tag, cns3xxx_l2_base + L2CC_TAG_RAM_LATENCY_CTRL);
-+
-+ /* Data RAM Control register
-+ *
-+ * bit[10:8] - 1 cycles of write accesses latency
-+ * bit[6:4] - 1 cycles of read accesses latency
-+ * bit[3:0] - 1 cycle of setup latency
-+ *
-+ * 1 cycle of setup latency, 2 cycles of read and write accesses latency
-+ */
-+ data = readl(cns3xxx_l2_base + L2CC_DATA_RAM_LATENCY_CTRL);
-+ data &= 0xfffff888;
-+ data |= 0x00000000;
-+ writel(data, cns3xxx_l2_base + L2CC_DATA_RAM_LATENCY_CTRL);
-+
-+ cns3xxx_l2_inv_all();
-+
-+ /* lockdown required ways for different effective size of the L2 cache */
-+#ifdef CONFIG_CACHE_L2CC_32KB
-+ /* 32KB, lock way7..1 */
-+ writel(0xfe, cns3xxx_l2_base + L2CC_LOCKDOWN_0_WAY_D);
-+ writel(0xfe, cns3xxx_l2_base + L2CC_LOCKDOWN_0_WAY_I);
-+ printk(KERN_INFO "CNS3XXX L2 cache lock down : way7..1\n");
-+#elif defined(CONFIG_CACHE_L2CC_64KB)
-+ /* 64KB, lock way7..2 */
-+ writel(0xfc, cns3xxx_l2_base + L2CC_LOCKDOWN_0_WAY_D);
-+ writel(0xfc, cns3xxx_l2_base + L2CC_LOCKDOWN_0_WAY_I);
-+ printk(KERN_INFO "CNS3XXX L2 cache lock down : way7..2\n");
-+#elif defined(CONFIG_CACHE_L2CC_96KB)
-+ /* 96KB, lock way7..3 */
-+ writel(0xf8, cns3xxx_l2_base + L2CC_LOCKDOWN_0_WAY_D);
-+ writel(0xf8, cns3xxx_l2_base + L2CC_LOCKDOWN_0_WAY_I);
-+ printk(KERN_INFO "CNS3XXX L2 cache lock down : way7..3\n");
-+#elif defined(CONFIG_CACHE_L2CC_128KB)
-+ /* 128KB, lock way7..4 */
-+ writel(0xf0, cns3xxx_l2_base + L2CC_LOCKDOWN_0_WAY_D);
-+ writel(0xf0, cns3xxx_l2_base + L2CC_LOCKDOWN_0_WAY_I);
-+ printk(KERN_INFO "CNS3XXX L2 cache lock down : way7..4\n");
-+#endif
-+
-+ /* enable L2CC */
-+ writel(1, cns3xxx_l2_base + L2CC_CTRL);
-+
-+ outer_cache.inv_range = cns3xxx_l2_inv_range;
-+ outer_cache.clean_range = cns3xxx_l2_clean_range;
-+ outer_cache.flush_range = cns3xxx_l2_flush_range;
-+
-+ printk("done.\n");
-+}
---- a/arch/arm/mm/cache-l2x0.c
-+++ b/arch/arm/mm/cache-l2x0.c
-@@ -109,6 +109,25 @@ void __init l2x0_init(void __iomem *base
-
- l2x0_inv_all();
-
-+ /* lockdown required ways for different effective size of the L2 cache */
-+#ifdef CONFIG_CACHE_L2X0_128KB
-+ /* 128KB, lock way7..1 */
-+ writel(0xfe, l2x0_base + L2X0_LOCKDOWN_WAY_D);
-+ writel(0xfe, l2x0_base + L2X0_LOCKDOWN_WAY_I);
-+#elif defined(CONFIG_CACHE_L2X0_256KB)
-+ /* 256KB, lock way7..2 */
-+ writel(0xfc, l2x0_base + L2X0_LOCKDOWN_WAY_D);
-+ writel(0xfc, l2x0_base + L2X0_LOCKDOWN_WAY_I);
-+#elif defined(CONFIG_CACHE_L2X0_512KB)
-+ /* 512KB, lock way7..3 */
-+ writel(0xf8, l2x0_base + L2X0_LOCKDOWN_WAY_D);
-+ writel(0xf8, l2x0_base + L2X0_LOCKDOWN_WAY_I);
-+#elif defined(CONFIG_CACHE_L2X0_1MB)
-+ /* 1MB, lock way7..4 */
-+ writel(0xf0, l2x0_base + L2X0_LOCKDOWN_WAY_D);
-+ writel(0xf0, l2x0_base + L2X0_LOCKDOWN_WAY_I);
-+#endif
-+
- /* enable L2X0 */
- writel(1, l2x0_base + L2X0_CTRL);
-
---- a/arch/arm/mm/dma-mapping.c
-+++ b/arch/arm/mm/dma-mapping.c
-@@ -29,7 +29,8 @@
- #error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
- #endif
-
--#define CONSISTENT_END (0xffe00000)
-+//#define CONSISTENT_END (0xffe00000)
-+#define CONSISTENT_END (0xf2000000)
- #define CONSISTENT_BASE (CONSISTENT_END - CONSISTENT_DMA_SIZE)
-
- #define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-@@ -208,7 +209,7 @@ __dma_alloc(struct device *dev, size_t s
- {
- void *ptr = page_address(page);
- memset(ptr, 0, size);
-- dmac_flush_range(ptr, ptr + size);
-+ smp_dma_flush_range(ptr, ptr + size);
- outer_flush_range(__pa(ptr), __pa(ptr) + size);
- }
-
-@@ -498,15 +499,15 @@ void dma_cache_maint(const void *start,
-
- switch (direction) {
- case DMA_FROM_DEVICE: /* invalidate only */
-- inner_op = dmac_inv_range;
-+ inner_op = smp_dma_inv_range;
- outer_op = outer_inv_range;
- break;
- case DMA_TO_DEVICE: /* writeback only */
-- inner_op = dmac_clean_range;
-+ inner_op = smp_dma_clean_range;
- outer_op = outer_clean_range;
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
-- inner_op = dmac_flush_range;
-+ inner_op = smp_dma_flush_range;
- outer_op = outer_flush_range;
- break;
- default:
-@@ -528,15 +529,15 @@ static void dma_cache_maint_contiguous(s
-
- switch (direction) {
- case DMA_FROM_DEVICE: /* invalidate only */
-- inner_op = dmac_inv_range;
-+ inner_op = smp_dma_inv_range;
- outer_op = outer_inv_range;
- break;
- case DMA_TO_DEVICE: /* writeback only */
-- inner_op = dmac_clean_range;
-+ inner_op = smp_dma_clean_range;
- outer_op = outer_clean_range;
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
-- inner_op = dmac_flush_range;
-+ inner_op = smp_dma_flush_range;
- outer_op = outer_flush_range;
- break;
- default:
---- a/arch/arm/mm/Kconfig
-+++ b/arch/arm/mm/Kconfig
-@@ -391,7 +391,7 @@ config CPU_FEROCEON_OLD_ID
-
- # ARMv6
- config CPU_V6
-- bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
-+ bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_CNS3XXX || MACH_REALVIEW_PBX
- select CPU_32v6
- select CPU_ABRT_EV6
- select CPU_PABRT_NOIFAR
-@@ -516,6 +516,16 @@ config CPU_CACHE_VIPT
- config CPU_CACHE_FA
- bool
-
-+config CPU_NO_CACHE_BCAST
-+ bool
-+ depends on SMP
-+ default y if CPU_V6
-+
-+config CPU_NO_CACHE_BCAST_DEBUG
-+ bool
-+ depends on SMP
-+ default y if CPU_V6
-+
- if MMU
- # The copy-page model
- config CPU_COPY_V3
-@@ -759,11 +769,84 @@ config CACHE_L2X0
- bool "Enable the L2x0 outer cache controller"
- depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
- REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX
-- default y
-+ default n
- select OUTER_CACHE
- help
- This option enables the L2x0 PrimeCell.
-
-+choice
-+ prompt "L2 Cache Size"
-+ depends on CACHE_L2X0
-+ default CACHE_L2X0_1MB
-+
-+config CACHE_L2X0_128KB
-+ bool "128KB"
-+ help
-+ 16KB/way, 8-way, evmon/parity/share enabled
-+
-+config CACHE_L2X0_256KB
-+ bool "256KB"
-+ help
-+ 32KB/way, 8-way, evmon/parity/share enabled
-+
-+config CACHE_L2X0_512KB
-+ bool "512KB"
-+ help
-+ 64KB/way, 8-way, evmon/parity/share enabled
-+
-+config CACHE_L2X0_1MB
-+ bool "1MB"
-+ help
-+ 128KB/way, 8-way, evmon/parity/share enabled
-+endchoice
-+
-+config CACHE_L2CC
-+ bool "Enable the L2 outer cache controller"
-+ depends on ARCH_CNS3XXX
-+ default n
-+ select OUTER_CACHE
-+ help
-+ This option enables the L2 cache controller.
-+
-+choice
-+ prompt "L2 Cache Size"
-+ depends on CACHE_L2CC
-+ default CACHE_L2CC_256KB
-+
-+config CACHE_L2CC_32KB
-+ bool "32KB"
-+ help
-+ 4KB/way, 8-way, evmon/share enabled
-+
-+config CACHE_L2CC_64KB
-+ bool "64KB"
-+ help
-+ 8KB/way, 8-way, evmon/share enabled
-+
-+config CACHE_L2CC_96KB
-+ bool "96KB"
-+ help
-+ 12KB/way, 8-way, evmon/share enabled
-+
-+config CACHE_L2CC_128KB
-+ bool "128KB"
-+ help
-+ 16KB/way, 8-way, evmon/share enabled
-+
-+config CACHE_L2CC_256KB
-+ bool "256KB"
-+ help
-+ 32KB/way, 8-way, evmon/share enabled
-+
-+endchoice
-+
-+config CACHE_L2_I_PREFETCH
-+ bool "Enable the L2 instruction prefetching"
-+ depends on CACHE_L2CC
-+ default y
-+ help
-+ This option enables instruction prefetching.
-+
- config CACHE_XSC3L2
- bool "Enable the L2 cache on XScale3"
- depends on CPU_XSC3
---- a/arch/arm/mm/Makefile
-+++ b/arch/arm/mm/Makefile
-@@ -82,5 +82,6 @@ obj-$(CONFIG_CPU_V7) += proc-v7.o
-
- obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o
- obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
-+obj-$(CONFIG_CACHE_L2CC) += cache-l2cc.o
- obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o
-
---- a/arch/arm/mm/mmu.c
-+++ b/arch/arm/mm/mmu.c
-@@ -687,7 +687,7 @@ __early_param("vmalloc=", early_vmalloc)
-
- static void __init sanity_check_meminfo(void)
- {
-- int i, j, highmem = 0;
-+ int i, j;
-
- for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
- struct membank *bank = &meminfo.bank[j];
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -2668,3 +2668,5 @@
- #define PCI_DEVICE_ID_RME_DIGI32 0x9896
- #define PCI_DEVICE_ID_RME_DIGI32_PRO 0x9897
- #define PCI_DEVICE_ID_RME_DIGI32_8 0x9898
-+
-+#define PCI_VENDOR_ID_CAVIUM 0x177d
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -12,7 +12,7 @@
- #
- # http://www.arm.linux.org.uk/developer/machines/?action=new
- #
--# Last update: Sat Jun 20 22:28:39 2009
-+# Last update: Wed Jun 9 02:11:30 2010
- #
- # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
- #
-@@ -928,7 +928,7 @@ palmt5 MACH_PALMT5 PALMT5 917
- palmtc MACH_PALMTC PALMTC 918
- omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919
- mxc30030evb MACH_MXC30030EVB MXC30030EVB 920
--rea_2d MACH_REA_2D REA_2D 921
-+rea_cpu2 MACH_REA_2D REA_2D 921
- eti3e524 MACH_TI3E524 TI3E524 922
- ateb9200 MACH_ATEB9200 ATEB9200 923
- auckland MACH_AUCKLAND AUCKLAND 924
-@@ -1319,7 +1319,7 @@ mistral MACH_MISTRAL MISTRAL 1315
- msm MACH_MSM MSM 1316
- ct5910 MACH_CT5910 CT5910 1317
- ct5912 MACH_CT5912 CT5912 1318
--hynet_ine MACH_HYNET_INE HYNET_INE 1319
-+argonst_foundation MACH_HYNET_INE HYNET_INE 1319
- hynet_app MACH_HYNET_APP HYNET_APP 1320
- msm7200 MACH_MSM7200 MSM7200 1321
- msm7600 MACH_MSM7600 MSM7600 1322
-@@ -1638,7 +1638,7 @@ mx35evb MACH_MX35EVB MX35EVB 1643
- aml_m8050 MACH_AML_M8050 AML_M8050 1644
- mx35_3ds MACH_MX35_3DS MX35_3DS 1645
- mars MACH_MARS MARS 1646
--ntosd_644xa MACH_NTOSD_644XA NTOSD_644XA 1647
-+neuros_osd2 MACH_NEUROS_OSD2 NEUROS_OSD2 1647
- badger MACH_BADGER BADGER 1648
- trizeps4wl MACH_TRIZEPS4WL TRIZEPS4WL 1649
- trizeps5 MACH_TRIZEPS5 TRIZEPS5 1650
-@@ -1654,7 +1654,7 @@ vf10xx MACH_VF10XX VF10XX 1659
- zoran43xx MACH_ZORAN43XX ZORAN43XX 1660
- sonix926 MACH_SONIX926 SONIX926 1661
- celestialsemi MACH_CELESTIALSEMI CELESTIALSEMI 1662
--cc9m2443 MACH_CC9M2443 CC9M2443 1663
-+cc9m2443js MACH_CC9M2443JS CC9M2443JS 1663
- tw5334 MACH_TW5334 TW5334 1664
- omap_htcartemis MACH_HTCARTEMIS HTCARTEMIS 1665
- nal_hlite MACH_NAL_HLITE NAL_HLITE 1666
-@@ -1769,14 +1769,15 @@ mx31cicada MACH_MX31CICADA MX31CICADA
- mi424wr MACH_MI424WR MI424WR 1778
- axs_ultrax MACH_AXS_ULTRAX AXS_ULTRAX 1779
- at572d940deb MACH_AT572D940DEB AT572D940DEB 1780
--davinci_da8xx_evm MACH_DAVINCI_DA8XX_EVM DAVINCI_DA8XX_EVM 1781
-+davinci_da830_evm MACH_DAVINCI_DA830_EVM DAVINCI_DA830_EVM 1781
- ep9302 MACH_EP9302 EP9302 1782
- at572d940hfek MACH_AT572D940HFEB AT572D940HFEB 1783
- cybook3 MACH_CYBOOK3 CYBOOK3 1784
- wdg002 MACH_WDG002 WDG002 1785
- sg560adsl MACH_SG560ADSL SG560ADSL 1786
- nextio_n2800_ica MACH_NEXTIO_N2800_ICA NEXTIO_N2800_ICA 1787
--marvell_newdb MACH_MARVELL_NEWDB MARVELL_NEWDB 1789
-+dove_db MACH_DOVE_DB DOVE_DB 1788
-+dove_avng MACH_MARVELL_NEWDB MARVELL_NEWDB 1789
- vandihud MACH_VANDIHUD VANDIHUD 1790
- magx_e8 MACH_MAGX_E8 MAGX_E8 1791
- magx_z6 MACH_MAGX_Z6 MAGX_Z6 1792
-@@ -1802,7 +1803,7 @@ ccw9p9215js MACH_CCW9P9215JS CCW9P9215J
- rd88f5181l_ge MACH_RD88F5181L_GE RD88F5181L_GE 1812
- sifmain MACH_SIFMAIN SIFMAIN 1813
- sam9_l9261 MACH_SAM9_L9261 SAM9_L9261 1814
--cc9m2443js MACH_CC9M2443JS CC9M2443JS 1815
-+cc9m2443 MACH_CC9M2443 CC9M2443 1815
- xaria300 MACH_XARIA300 XARIA300 1816
- it9200 MACH_IT9200 IT9200 1817
- rd88f5181l_fxo MACH_RD88F5181L_FXO RD88F5181L_FXO 1818
-@@ -1962,7 +1963,7 @@ ethernut5 MACH_ETHERNUT5 ETHERNUT5 19
- arm11 MACH_ARM11 ARM11 1972
- cpuat9260 MACH_CPUAT9260 CPUAT9260 1973
- cpupxa255 MACH_CPUPXA255 CPUPXA255 1974
--cpuimx27 MACH_CPUIMX27 CPUIMX27 1975
-+eukrea_cpuimx27 MACH_CPUIMX27 CPUIMX27 1975
- cheflux MACH_CHEFLUX CHEFLUX 1976
- eb_cpux9k2 MACH_EB_CPUX9K2 EB_CPUX9K2 1977
- opcotec MACH_OPCOTEC OPCOTEC 1978
-@@ -2249,14 +2250,14 @@ omap3_phrazer MACH_OMAP3_PHRAZER OMAP3_
- darwin MACH_DARWIN DARWIN 2262
- oratiscomu MACH_ORATISCOMU ORATISCOMU 2263
- rtsbc20 MACH_RTSBC20 RTSBC20 2264
--i780 MACH_I780 I780 2265
-+sgh_i780 MACH_I780 I780 2265
- gemini324 MACH_GEMINI324 GEMINI324 2266
- oratislan MACH_ORATISLAN ORATISLAN 2267
- oratisalog MACH_ORATISALOG ORATISALOG 2268
- oratismadi MACH_ORATISMADI ORATISMADI 2269
- oratisot16 MACH_ORATISOT16 ORATISOT16 2270
- oratisdesk MACH_ORATISDESK ORATISDESK 2271
--v2p_ca9 MACH_V2P_CA9 V2P_CA9 2272
-+vexpress MACH_VEXPRESS VEXPRESS 2272
- sintexo MACH_SINTEXO SINTEXO 2273
- cm3389 MACH_CM3389 CM3389 2274
- omap3_cio MACH_OMAP3_CIO OMAP3_CIO 2275
-@@ -2280,3 +2281,615 @@ htcrhodium MACH_HTCRHODIUM HTCRHODIUM
- htctopaz MACH_HTCTOPAZ HTCTOPAZ 2293
- matrix504 MACH_MATRIX504 MATRIX504 2294
- mrfsa MACH_MRFSA MRFSA 2295
-+sc_p270 MACH_SC_P270 SC_P270 2296
-+atlas5_evb MACH_ATLAS5_EVB ATLAS5_EVB 2297
-+pelco_lobox MACH_PELCO_LOBOX PELCO_LOBOX 2298
-+dilax_pcu200 MACH_DILAX_PCU200 DILAX_PCU200 2299
-+leonardo MACH_LEONARDO LEONARDO 2300
-+zoran_approach7 MACH_ZORAN_APPROACH7 ZORAN_APPROACH7 2301
-+dp6xx MACH_DP6XX DP6XX 2302
-+bcm2153_vesper MACH_BCM2153_VESPER BCM2153_VESPER 2303
-+mahimahi MACH_MAHIMAHI MAHIMAHI 2304
-+clickc MACH_CLICKC CLICKC 2305
-+zb_gateway MACH_ZB_GATEWAY ZB_GATEWAY 2306
-+tazcard MACH_TAZCARD TAZCARD 2307
-+tazdev MACH_TAZDEV TAZDEV 2308
-+annax_cb_arm MACH_ANNAX_CB_ARM ANNAX_CB_ARM 2309
-+annax_dm3 MACH_ANNAX_DM3 ANNAX_DM3 2310
-+cerebric MACH_CEREBRIC CEREBRIC 2311
-+orca MACH_ORCA ORCA 2312
-+pc9260 MACH_PC9260 PC9260 2313
-+ems285a MACH_EMS285A EMS285A 2314
-+gec2410 MACH_GEC2410 GEC2410 2315
-+gec2440 MACH_GEC2440 GEC2440 2316
-+mw903 MACH_ARCH_MW903 ARCH_MW903 2317
-+mw2440 MACH_MW2440 MW2440 2318
-+ecac2378 MACH_ECAC2378 ECAC2378 2319
-+tazkiosk MACH_TAZKIOSK TAZKIOSK 2320
-+whiterabbit_mch MACH_WHITERABBIT_MCH WHITERABBIT_MCH 2321
-+sbox9263 MACH_SBOX9263 SBOX9263 2322
-+oreo_camera MACH_OREO OREO 2323
-+smdk6442 MACH_SMDK6442 SMDK6442 2324
-+openrd_base MACH_OPENRD_BASE OPENRD_BASE 2325
-+incredible MACH_INCREDIBLE INCREDIBLE 2326
-+incrediblec MACH_INCREDIBLEC INCREDIBLEC 2327
-+heroct MACH_HEROCT HEROCT 2328
-+mmnet1000 MACH_MMNET1000 MMNET1000 2329
-+devkit8000 MACH_DEVKIT8000 DEVKIT8000 2330
-+devkit9000 MACH_DEVKIT9000 DEVKIT9000 2331
-+mx31txtr MACH_MX31TXTR MX31TXTR 2332
-+u380 MACH_U380 U380 2333
-+oamp3_hualu MACH_HUALU_BOARD HUALU_BOARD 2334
-+npcmx50 MACH_NPCMX50 NPCMX50 2335
-+mx51_lange51 MACH_MX51_LANGE51 MX51_LANGE51 2336
-+mx51_lange52 MACH_MX51_LANGE52 MX51_LANGE52 2337
-+riom MACH_RIOM RIOM 2338
-+comcas MACH_COMCAS COMCAS 2339
-+wsi_mx27 MACH_WSI_MX27 WSI_MX27 2340
-+cm_t35 MACH_CM_T35 CM_T35 2341
-+net2big MACH_NET2BIG NET2BIG 2342
-+motorola_a1600 MACH_MOTOROLA_A1600 MOTOROLA_A1600 2343
-+igep0020 MACH_IGEP0020 IGEP0020 2344
-+igep0010 MACH_IGEP0010 IGEP0010 2345
-+mv6281gtwge2 MACH_MV6281GTWGE2 MV6281GTWGE2 2346
-+scat100 MACH_SCAT100 SCAT100 2347
-+sanmina MACH_SANMINA SANMINA 2348
-+momento MACH_MOMENTO MOMENTO 2349
-+nuc9xx MACH_NUC9XX NUC9XX 2350
-+nuc910evb MACH_NUC910EVB NUC910EVB 2351
-+nuc920evb MACH_NUC920EVB NUC920EVB 2352
-+nuc950evb MACH_NUC950EVB NUC950EVB 2353
-+nuc945evb MACH_NUC945EVB NUC945EVB 2354
-+nuc960evb MACH_NUC960EVB NUC960EVB 2355
-+nuc932evb MACH_NUC932EVB NUC932EVB 2356
-+nuc900 MACH_NUC900 NUC900 2357
-+sd1soc MACH_SD1SOC SD1SOC 2358
-+ln2440bc MACH_LN2440BC LN2440BC 2359
-+rsbc MACH_RSBC RSBC 2360
-+openrd_client MACH_OPENRD_CLIENT OPENRD_CLIENT 2361
-+hpipaq11x MACH_HPIPAQ11X HPIPAQ11X 2362
-+wayland MACH_WAYLAND WAYLAND 2363
-+acnbsx102 MACH_ACNBSX102 ACNBSX102 2364
-+hwat91 MACH_HWAT91 HWAT91 2365
-+at91sam9263cs MACH_AT91SAM9263CS AT91SAM9263CS 2366
-+csb732 MACH_CSB732 CSB732 2367
-+u8500 MACH_U8500 U8500 2368
-+huqiu MACH_HUQIU HUQIU 2369
-+mx51_kunlun MACH_MX51_KUNLUN MX51_KUNLUN 2370
-+pmt1g MACH_PMT1G PMT1G 2371
-+htcelf MACH_HTCELF HTCELF 2372
-+armadillo420 MACH_ARMADILLO420 ARMADILLO420 2373
-+armadillo440 MACH_ARMADILLO440 ARMADILLO440 2374
-+u_chip_dual_arm MACH_U_CHIP_DUAL_ARM U_CHIP_DUAL_ARM 2375
-+csr_bdb3 MACH_CSR_BDB3 CSR_BDB3 2376
-+dolby_cat1018 MACH_DOLBY_CAT1018 DOLBY_CAT1018 2377
-+hy9307 MACH_HY9307 HY9307 2378
-+aspire_easystore MACH_A_ES A_ES 2379
-+davinci_irif MACH_DAVINCI_IRIF DAVINCI_IRIF 2380
-+agama9263 MACH_AGAMA9263 AGAMA9263 2381
-+marvell_jasper MACH_MARVELL_JASPER MARVELL_JASPER 2382
-+flint MACH_FLINT FLINT 2383
-+tavorevb3 MACH_TAVOREVB3 TAVOREVB3 2384
-+sch_m490 MACH_SCH_M490 SCH_M490 2386
-+rbl01 MACH_RBL01 RBL01 2387
-+omnifi MACH_OMNIFI OMNIFI 2388
-+otavalo MACH_OTAVALO OTAVALO 2389
-+siena MACH_SIENNA SIENNA 2390
-+htc_excalibur_s620 MACH_HTC_EXCALIBUR_S620 HTC_EXCALIBUR_S620 2391
-+htc_opal MACH_HTC_OPAL HTC_OPAL 2392
-+touchbook MACH_TOUCHBOOK TOUCHBOOK 2393
-+latte MACH_LATTE LATTE 2394
-+xa200 MACH_XA200 XA200 2395
-+nimrod MACH_NIMROD NIMROD 2396
-+cc9p9215_3g MACH_CC9P9215_3G CC9P9215_3G 2397
-+cc9p9215_3gjs MACH_CC9P9215_3GJS CC9P9215_3GJS 2398
-+tk71 MACH_TK71 TK71 2399
-+comham3525 MACH_COMHAM3525 COMHAM3525 2400
-+mx31erebus MACH_MX31EREBUS MX31EREBUS 2401
-+mcardmx27 MACH_MCARDMX27 MCARDMX27 2402
-+paradise MACH_PARADISE PARADISE 2403
-+tide MACH_TIDE TIDE 2404
-+wzl2440 MACH_WZL2440 WZL2440 2405
-+sdrdemo MACH_SDRDEMO SDRDEMO 2406
-+ethercan2 MACH_ETHERCAN2 ETHERCAN2 2407
-+ecmimg20 MACH_ECMIMG20 ECMIMG20 2408
-+omap_dragon MACH_OMAP_DRAGON OMAP_DRAGON 2409
-+halo MACH_HALO HALO 2410
-+huangshan MACH_HUANGSHAN HUANGSHAN 2411
-+vl_ma2sc MACH_VL_MA2SC VL_MA2SC 2412
-+raumfeld_rc MACH_RAUMFELD_RC RAUMFELD_RC 2413
-+raumfeld_connector MACH_RAUMFELD_CONNECTOR RAUMFELD_CONNECTOR 2414
-+raumfeld_speaker MACH_RAUMFELD_SPEAKER RAUMFELD_SPEAKER 2415
-+multibus_master MACH_MULTIBUS_MASTER MULTIBUS_MASTER 2416
-+multibus_pbk MACH_MULTIBUS_PBK MULTIBUS_PBK 2417
-+tnetv107x MACH_TNETV107X TNETV107X 2418
-+snake MACH_SNAKE SNAKE 2419
-+cwmx27 MACH_CWMX27 CWMX27 2420
-+sch_m480 MACH_SCH_M480 SCH_M480 2421
-+platypus MACH_PLATYPUS PLATYPUS 2422
-+pss2 MACH_PSS2 PSS2 2423
-+davinci_apm150 MACH_DAVINCI_APM150 DAVINCI_APM150 2424
-+str9100 MACH_STR9100 STR9100 2425
-+net5big MACH_NET5BIG NET5BIG 2426
-+seabed9263 MACH_SEABED9263 SEABED9263 2427
-+mx51_m2id MACH_MX51_M2ID MX51_M2ID 2428
-+octvocplus_eb MACH_OCTVOCPLUS_EB OCTVOCPLUS_EB 2429
-+klk_firefox MACH_KLK_FIREFOX KLK_FIREFOX 2430
-+klk_wirma_module MACH_KLK_WIRMA_MODULE KLK_WIRMA_MODULE 2431
-+klk_wirma_mmi MACH_KLK_WIRMA_MMI KLK_WIRMA_MMI 2432
-+supersonic MACH_SUPERSONIC SUPERSONIC 2433
-+liberty MACH_LIBERTY LIBERTY 2434
-+mh355 MACH_MH355 MH355 2435
-+pc7802 MACH_PC7802 PC7802 2436
-+gnet_sgc MACH_GNET_SGC GNET_SGC 2437
-+einstein15 MACH_EINSTEIN15 EINSTEIN15 2438
-+cmpd MACH_CMPD CMPD 2439
-+davinci_hase1 MACH_DAVINCI_HASE1 DAVINCI_HASE1 2440
-+lgeincitephone MACH_LGEINCITEPHONE LGEINCITEPHONE 2441
-+ea313x MACH_EA313X EA313X 2442
-+fwbd_39064 MACH_FWBD_39064 FWBD_39064 2443
-+fwbd_390128 MACH_FWBD_390128 FWBD_390128 2444
-+pelco_moe MACH_PELCO_MOE PELCO_MOE 2445
-+minimix27 MACH_MINIMIX27 MINIMIX27 2446
-+omap3_thunder MACH_OMAP3_THUNDER OMAP3_THUNDER 2447
-+passionc MACH_PASSIONC PASSIONC 2448
-+mx27amata MACH_MX27AMATA MX27AMATA 2449
-+bgat1 MACH_BGAT1 BGAT1 2450
-+buzz MACH_BUZZ BUZZ 2451
-+mb9g20 MACH_MB9G20 MB9G20 2452
-+yushan MACH_YUSHAN YUSHAN 2453
-+lizard MACH_LIZARD LIZARD 2454
-+omap3polycom MACH_OMAP3POLYCOM OMAP3POLYCOM 2455
-+smdkv210 MACH_SMDKV210 SMDKV210 2456
-+bravo MACH_BRAVO BRAVO 2457
-+siogentoo1 MACH_SIOGENTOO1 SIOGENTOO1 2458
-+siogentoo2 MACH_SIOGENTOO2 SIOGENTOO2 2459
-+sm3k MACH_SM3K SM3K 2460
-+acer_tempo_f900 MACH_ACER_TEMPO_F900 ACER_TEMPO_F900 2461
-+sst61vc010_dev MACH_SST61VC010_DEV SST61VC010_DEV 2462
-+glittertind MACH_GLITTERTIND GLITTERTIND 2463
-+omap_zoom3 MACH_OMAP_ZOOM3 OMAP_ZOOM3 2464
-+omap_3630sdp MACH_OMAP_3630SDP OMAP_3630SDP 2465
-+cybook2440 MACH_CYBOOK2440 CYBOOK2440 2466
-+torino_s MACH_TORINO_S TORINO_S 2467
-+havana MACH_HAVANA HAVANA 2468
-+beaumont_11 MACH_BEAUMONT_11 BEAUMONT_11 2469
-+vanguard MACH_VANGUARD VANGUARD 2470
-+s5pc110_draco MACH_S5PC110_DRACO S5PC110_DRACO 2471
-+cartesio_two MACH_CARTESIO_TWO CARTESIO_TWO 2472
-+aster MACH_ASTER ASTER 2473
-+voguesv210 MACH_VOGUESV210 VOGUESV210 2474
-+acm500x MACH_ACM500X ACM500X 2475
-+km9260 MACH_KM9260 KM9260 2476
-+nideflexg1 MACH_NIDEFLEXG1 NIDEFLEXG1 2477
-+ctera_plug_io MACH_CTERA_PLUG_IO CTERA_PLUG_IO 2478
-+smartq7 MACH_SMARTQ7 SMARTQ7 2479
-+at91sam9g10ek2 MACH_AT91SAM9G10EK2 AT91SAM9G10EK2 2480
-+asusp527 MACH_ASUSP527 ASUSP527 2481
-+at91sam9g20mpm2 MACH_AT91SAM9G20MPM2 AT91SAM9G20MPM2 2482
-+topasa900 MACH_TOPASA900 TOPASA900 2483
-+electrum_100 MACH_ELECTRUM_100 ELECTRUM_100 2484
-+mx51grb MACH_MX51GRB MX51GRB 2485
-+xea300 MACH_XEA300 XEA300 2486
-+htcstartrek MACH_HTCSTARTREK HTCSTARTREK 2487
-+lima MACH_LIMA LIMA 2488
-+csb740 MACH_CSB740 CSB740 2489
-+usb_s8815 MACH_USB_S8815 USB_S8815 2490
-+watson_efm_plugin MACH_WATSON_EFM_PLUGIN WATSON_EFM_PLUGIN 2491
-+milkyway MACH_MILKYWAY MILKYWAY 2492
-+g4evm MACH_G4EVM G4EVM 2493
-+picomod6 MACH_PICOMOD6 PICOMOD6 2494
-+omapl138_hawkboard MACH_OMAPL138_HAWKBOARD OMAPL138_HAWKBOARD 2495
-+ip6000 MACH_IP6000 IP6000 2496
-+ip6010 MACH_IP6010 IP6010 2497
-+utm400 MACH_UTM400 UTM400 2498
-+omap3_zybex MACH_OMAP3_ZYBEX OMAP3_ZYBEX 2499
-+wireless_space MACH_WIRELESS_SPACE WIRELESS_SPACE 2500
-+sx560 MACH_SX560 SX560 2501
-+ts41x MACH_TS41X TS41X 2502
-+elphel10373 MACH_ELPHEL10373 ELPHEL10373 2503
-+rhobot MACH_RHOBOT RHOBOT 2504
-+mx51_refresh MACH_MX51_REFRESH MX51_REFRESH 2505
-+ls9260 MACH_LS9260 LS9260 2506
-+shank MACH_SHANK SHANK 2507
-+qsd8x50_st1 MACH_QSD8X50_ST1 QSD8X50_ST1 2508
-+at91sam9m10ekes MACH_AT91SAM9M10EKES AT91SAM9M10EKES 2509
-+hiram MACH_HIRAM HIRAM 2510
-+phy3250 MACH_PHY3250 PHY3250 2511
-+ea3250 MACH_EA3250 EA3250 2512
-+fdi3250 MACH_FDI3250 FDI3250 2513
-+htcwhitestone MACH_WHITESTONE WHITESTONE 2514
-+at91sam9263nit MACH_AT91SAM9263NIT AT91SAM9263NIT 2515
-+ccmx51 MACH_CCMX51 CCMX51 2516
-+ccmx51js MACH_CCMX51JS CCMX51JS 2517
-+ccwmx51 MACH_CCWMX51 CCWMX51 2518
-+ccwmx51js MACH_CCWMX51JS CCWMX51JS 2519
-+mini6410 MACH_MINI6410 MINI6410 2520
-+tiny6410 MACH_TINY6410 TINY6410 2521
-+nano6410 MACH_NANO6410 NANO6410 2522
-+at572d940hfnldb MACH_AT572D940HFNLDB AT572D940HFNLDB 2523
-+htcleo MACH_HTCLEO HTCLEO 2524
-+avp13 MACH_AVP13 AVP13 2525
-+xxsvideod MACH_XXSVIDEOD XXSVIDEOD 2526
-+vpnext MACH_VPNEXT VPNEXT 2527
-+swarco_itc3 MACH_SWARCO_ITC3 SWARCO_ITC3 2528
-+tx51 MACH_TX51 TX51 2529
-+dolby_cat1021 MACH_DOLBY_CAT1021 DOLBY_CAT1021 2530
-+mx28evk MACH_MX28EVK MX28EVK 2531
-+phoenix260 MACH_PHOENIX260 PHOENIX260 2532
-+uvaca_stork MACH_UVACA_STORK UVACA_STORK 2533
-+smartq5 MACH_SMARTQ5 SMARTQ5 2534
-+all3078 MACH_ALL3078 ALL3078 2535
-+ctera_2bay_ds MACH_CTERA_2BAY_DS CTERA_2BAY_DS 2536
-+siogentoo3 MACH_SIOGENTOO3 SIOGENTOO3 2537
-+epb5000 MACH_EPB5000 EPB5000 2538
-+hy9263 MACH_HY9263 HY9263 2539
-+acer_tempo_m900 MACH_ACER_TEMPO_M900 ACER_TEMPO_M900 2540
-+acer_tempo_dx650 MACH_ACER_TEMPO_DX900 ACER_TEMPO_DX900 2541
-+acer_tempo_x960 MACH_ACER_TEMPO_X960 ACER_TEMPO_X960 2542
-+acer_eten_v900 MACH_ACER_ETEN_V900 ACER_ETEN_V900 2543
-+acer_eten_x900 MACH_ACER_ETEN_X900 ACER_ETEN_X900 2544
-+bonnell MACH_BONNELL BONNELL 2545
-+oht_mx27 MACH_OHT_MX27 OHT_MX27 2546
-+htcquartz MACH_HTCQUARTZ HTCQUARTZ 2547
-+davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548
-+c3ax03 MACH_C3AX03 C3AX03 2549
-+mxt_td60 MACH_MXT_TD60 MXT_TD60 2550
-+esyx MACH_ESYX ESYX 2551
-+dove_db2 MACH_DOVE_DB2 DOVE_DB2 2552
-+bulldog MACH_BULLDOG BULLDOG 2553
-+derell_me2000 MACH_DERELL_ME2000 DERELL_ME2000 2554
-+bcmring_base MACH_BCMRING_BASE BCMRING_BASE 2555
-+bcmring_evm MACH_BCMRING_EVM BCMRING_EVM 2556
-+bcmring_evm_jazz MACH_BCMRING_EVM_JAZZ BCMRING_EVM_JAZZ 2557
-+bcmring_sp MACH_BCMRING_SP BCMRING_SP 2558
-+bcmring_sv MACH_BCMRING_SV BCMRING_SV 2559
-+bcmring_sv_jazz MACH_BCMRING_SV_JAZZ BCMRING_SV_JAZZ 2560
-+bcmring_tablet MACH_BCMRING_TABLET BCMRING_TABLET 2561
-+bcmring_vp MACH_BCMRING_VP BCMRING_VP 2562
-+bcmring_evm_seikor MACH_BCMRING_EVM_SEIKOR BCMRING_EVM_SEIKOR 2563
-+bcmring_sp_wqvga MACH_BCMRING_SP_WQVGA BCMRING_SP_WQVGA 2564
-+bcmring_custom MACH_BCMRING_CUSTOM BCMRING_CUSTOM 2565
-+acer_s200 MACH_ACER_S200 ACER_S200 2566
-+bt270 MACH_BT270 BT270 2567
-+iseo MACH_ISEO ISEO 2568
-+cezanne MACH_CEZANNE CEZANNE 2569
-+lucca MACH_LUCCA LUCCA 2570
-+supersmart MACH_SUPERSMART SUPERSMART 2571
-+arm11_board MACH_CS_MISANO CS_MISANO 2572
-+magnolia2 MACH_MAGNOLIA2 MAGNOLIA2 2573
-+emxx MACH_EMXX EMXX 2574
-+outlaw MACH_OUTLAW OUTLAW 2575
-+riot_bei2 MACH_RIOT_BEI2 RIOT_BEI2 2576
-+riot_vox MACH_RIOT_VOX RIOT_VOX 2577
-+riot_x37 MACH_RIOT_X37 RIOT_X37 2578
-+mega25mx MACH_MEGA25MX MEGA25MX 2579
-+benzina2 MACH_BENZINA2 BENZINA2 2580
-+ignite MACH_IGNITE IGNITE 2581
-+foggia MACH_FOGGIA FOGGIA 2582
-+arezzo MACH_AREZZO AREZZO 2583
-+leica_skywalker MACH_LEICA_SKYWALKER LEICA_SKYWALKER 2584
-+jacinto2_jamr MACH_JACINTO2_JAMR JACINTO2_JAMR 2585
-+gts_nova MACH_GTS_NOVA GTS_NOVA 2586
-+p3600 MACH_P3600 P3600 2587
-+dlt2 MACH_DLT2 DLT2 2588
-+df3120 MACH_DF3120 DF3120 2589
-+ecucore_9g20 MACH_ECUCORE_9G20 ECUCORE_9G20 2590
-+nautel_lpc3240 MACH_NAUTEL_LPC3240 NAUTEL_LPC3240 2591
-+glacier MACH_GLACIER GLACIER 2592
-+phrazer_bulldog MACH_PHRAZER_BULLDOG PHRAZER_BULLDOG 2593
-+omap3_bulldog MACH_OMAP3_BULLDOG OMAP3_BULLDOG 2594
-+pca101 MACH_PCA101 PCA101 2595
-+buzzc MACH_BUZZC BUZZC 2596
-+sasie2 MACH_SASIE2 SASIE2 2597
-+davinci_dm6467_cio MACH_DAVINCI_CIO DAVINCI_CIO 2598
-+smartmeter_dl MACH_SMARTMETER_DL SMARTMETER_DL 2599
-+wzl6410 MACH_WZL6410 WZL6410 2600
-+wzl6410m MACH_WZL6410M WZL6410M 2601
-+wzl6410f MACH_WZL6410F WZL6410F 2602
-+wzl6410i MACH_WZL6410I WZL6410I 2603
-+spacecom1 MACH_SPACECOM1 SPACECOM1 2604
-+pingu920 MACH_PINGU920 PINGU920 2605
-+bravoc MACH_BRAVOC BRAVOC 2606
-+cybo2440 MACH_CYBO2440 CYBO2440 2607
-+vdssw MACH_VDSSW VDSSW 2608
-+romulus MACH_ROMULUS ROMULUS 2609
-+omap_magic MACH_OMAP_MAGIC OMAP_MAGIC 2610
-+eltd100 MACH_ELTD100 ELTD100 2611
-+capc7117 MACH_CAPC7117 CAPC7117 2612
-+swan MACH_SWAN SWAN 2613
-+veu MACH_VEU VEU 2614
-+rm2 MACH_RM2 RM2 2615
-+tt2100 MACH_TT2100 TT2100 2616
-+venice MACH_VENICE VENICE 2617
-+pc7323 MACH_PC7323 PC7323 2618
-+masp MACH_MASP MASP 2619
-+fujitsu_tvstbsoc0 MACH_FUJITSU_TVSTBSOC FUJITSU_TVSTBSOC 2620
-+fujitsu_tvstbsoc1 MACH_FUJITSU_TVSTBSOC1 FUJITSU_TVSTBSOC1 2621
-+lexikon MACH_LEXIKON LEXIKON 2622
-+mini2440v2 MACH_MINI2440V2 MINI2440V2 2623
-+icontrol MACH_ICONTROL ICONTROL 2624
-+sheevad MACH_SHEEVAD SHEEVAD 2625
-+qsd8x50a_st1_1 MACH_QSD8X50A_ST1_1 QSD8X50A_ST1_1 2626
-+qsd8x50a_st1_5 MACH_QSD8X50A_ST1_5 QSD8X50A_ST1_5 2627
-+bee MACH_BEE BEE 2628
-+mx23evk MACH_MX23EVK MX23EVK 2629
-+ap4evb MACH_AP4EVB AP4EVB 2630
-+stockholm MACH_STOCKHOLM STOCKHOLM 2631
-+lpc_h3131 MACH_LPC_H3131 LPC_H3131 2632
-+stingray MACH_STINGRAY STINGRAY 2633
-+kraken MACH_KRAKEN KRAKEN 2634
-+gw2388 MACH_GW2388 GW2388 2635
-+jadecpu MACH_JADECPU JADECPU 2636
-+carlisle MACH_CARLISLE CARLISLE 2637
-+lux_sf9 MACH_LUX_SFT9 LUX_SFT9 2638
-+nemid_tb MACH_NEMID_TB NEMID_TB 2639
-+terrier MACH_TERRIER TERRIER 2640
-+turbot MACH_TURBOT TURBOT 2641
-+sanddab MACH_SANDDAB SANDDAB 2642
-+mx35_cicada MACH_MX35_CICADA MX35_CICADA 2643
-+ghi2703d MACH_GHI2703D GHI2703D 2644
-+lux_sfx9 MACH_LUX_SFX9 LUX_SFX9 2645
-+lux_sf9g MACH_LUX_SF9G LUX_SF9G 2646
-+lux_edk9 MACH_LUX_EDK9 LUX_EDK9 2647
-+hw90240 MACH_HW90240 HW90240 2648
-+dm365_leopard MACH_DM365_LEOPARD DM365_LEOPARD 2649
-+mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650
-+scat110 MACH_SCAT110 SCAT110 2651
-+acer_a1 MACH_ACER_A1 ACER_A1 2652
-+cmcontrol MACH_CMCONTROL CMCONTROL 2653
-+pelco_lamar MACH_PELCO_LAMAR PELCO_LAMAR 2654
-+rfp43 MACH_RFP43 RFP43 2655
-+sk86r0301 MACH_SK86R0301 SK86R0301 2656
-+ctpxa MACH_CTPXA CTPXA 2657
-+epb_arm9_a MACH_EPB_ARM9_A EPB_ARM9_A 2658
-+guruplug MACH_GURUPLUG GURUPLUG 2659
-+spear310 MACH_SPEAR310 SPEAR310 2660
-+spear320 MACH_SPEAR320 SPEAR320 2661
-+robotx MACH_ROBOTX ROBOTX 2662
-+lsxhl MACH_LSXHL LSXHL 2663
-+smartlite MACH_SMARTLITE SMARTLITE 2664
-+cws2 MACH_CWS2 CWS2 2665
-+m619 MACH_M619 M619 2666
-+smartview MACH_SMARTVIEW SMARTVIEW 2667
-+lsa_salsa MACH_LSA_SALSA LSA_SALSA 2668
-+kizbox MACH_KIZBOX KIZBOX 2669
-+htccharmer MACH_HTCCHARMER HTCCHARMER 2670
-+guf_neso_lt MACH_GUF_NESO_LT GUF_NESO_LT 2671
-+pm9g45 MACH_PM9G45 PM9G45 2672
-+htcpanther MACH_HTCPANTHER HTCPANTHER 2673
-+htcpanther_cdma MACH_HTCPANTHER_CDMA HTCPANTHER_CDMA 2674
-+reb01 MACH_REB01 REB01 2675
-+aquila MACH_AQUILA AQUILA 2676
-+spark_sls_hw2 MACH_SPARK_SLS_HW2 SPARK_SLS_HW2 2677
-+sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678
-+msm7x30_surf MACH_MSM7X30_SURF MSM7X30_SURF 2679
-+micro2440 MACH_MICRO2440 MICRO2440 2680
-+am2440 MACH_AM2440 AM2440 2681
-+tq2440 MACH_TQ2440 TQ2440 2682
-+lpc2478oem MACH_LPC2478OEM LPC2478OEM 2683
-+ak880x MACH_AK880X AK880X 2684
-+cobra3530 MACH_COBRA3530 COBRA3530 2685
-+pmppb MACH_PMPPB PMPPB 2686
-+u6715 MACH_U6715 U6715 2687
-+axar1500_sender MACH_AXAR1500_SENDER AXAR1500_SENDER 2688
-+g30_dvb MACH_G30_DVB G30_DVB 2689
-+vc088x MACH_VC088X VC088X 2690
-+mioa702 MACH_MIOA702 MIOA702 2691
-+hpmin MACH_HPMIN HPMIN 2692
-+ak880xak MACH_AK880XAK AK880XAK 2693
-+arm926tomap850 MACH_ARM926TOMAP850 ARM926TOMAP850 2694
-+lkevm MACH_LKEVM LKEVM 2695
-+mw6410 MACH_MW6410 MW6410 2696
-+terastation_wxl MACH_TERASTATION_WXL TERASTATION_WXL 2697
-+cpu8000e MACH_CPU8000E CPU8000E 2698
-+catania MACH_CATANIA CATANIA 2699
-+tokyo MACH_TOKYO TOKYO 2700
-+msm7201a_surf MACH_MSM7201A_SURF MSM7201A_SURF 2701
-+msm7201a_ffa MACH_MSM7201A_FFA MSM7201A_FFA 2702
-+msm7x25_surf MACH_MSM7X25_SURF MSM7X25_SURF 2703
-+msm7x25_ffa MACH_MSM7X25_FFA MSM7X25_FFA 2704
-+msm7x27_surf MACH_MSM7X27_SURF MSM7X27_SURF 2705
-+msm7x27_ffa MACH_MSM7X27_FFA MSM7X27_FFA 2706
-+msm7x30_ffa MACH_MSM7X30_FFA MSM7X30_FFA 2707
-+qsd8x50_surf MACH_QSD8X50_SURF QSD8X50_SURF 2708
-+qsd8x50_comet MACH_QSD8X50_COMET QSD8X50_COMET 2709
-+qsd8x50_ffa MACH_QSD8X50_FFA QSD8X50_FFA 2710
-+qsd8x50a_surf MACH_QSD8X50A_SURF QSD8X50A_SURF 2711
-+qsd8x50a_ffa MACH_QSD8X50A_FFA QSD8X50A_FFA 2712
-+adx_xgcp10 MACH_ADX_XGCP10 ADX_XGCP10 2713
-+mcgwumts2a MACH_MCGWUMTS2A MCGWUMTS2A 2714
-+mobikt MACH_MOBIKT MOBIKT 2715
-+mx53_evk MACH_MX53_EVK MX53_EVK 2716
-+igep0030 MACH_IGEP0030 IGEP0030 2717
-+axell_h40_h50_ctrl MACH_AXELL_H40_H50_CTRL AXELL_H40_H50_CTRL 2718
-+dtcommod MACH_DTCOMMOD DTCOMMOD 2719
-+gould MACH_GOULD GOULD 2720
-+siberia MACH_SIBERIA SIBERIA 2721
-+sbc3530 MACH_SBC3530 SBC3530 2722
-+qarm MACH_QARM QARM 2723
-+mips MACH_MIPS MIPS 2724
-+mx27grb MACH_MX27GRB MX27GRB 2725
-+sbc8100 MACH_SBC8100 SBC8100 2726
-+saarb MACH_SAARB SAARB 2727
-+omap3mini MACH_OMAP3MINI OMAP3MINI 2728
-+cnmbook7se MACH_CNMBOOK7SE CNMBOOK7SE 2729
-+catan MACH_CATAN CATAN 2730
-+harmony MACH_HARMONY HARMONY 2731
-+tonga MACH_TONGA TONGA 2732
-+cybook_orizon MACH_CYBOOK_ORIZON CYBOOK_ORIZON 2733
-+htcrhodiumcdma MACH_HTCRHODIUMCDMA HTCRHODIUMCDMA 2734
-+epc_g45 MACH_EPC_G45 EPC_G45 2735
-+epc_lpc3250 MACH_EPC_LPC3250 EPC_LPC3250 2736
-+mxc91341evb MACH_MXC91341EVB MXC91341EVB 2737
-+rtw1000 MACH_RTW1000 RTW1000 2738
-+bobcat MACH_BOBCAT BOBCAT 2739
-+trizeps6 MACH_TRIZEPS6 TRIZEPS6 2740
-+msm7x30_fluid MACH_MSM7X30_FLUID MSM7X30_FLUID 2741
-+nedap9263 MACH_NEDAP9263 NEDAP9263 2742
-+netgear_ms2110 MACH_NETGEAR_MS2110 NETGEAR_MS2110 2743
-+bmx MACH_BMX BMX 2744
-+netstream MACH_NETSTREAM NETSTREAM 2745
-+vpnext_rcu MACH_VPNEXT_RCU VPNEXT_RCU 2746
-+vpnext_mpu MACH_VPNEXT_MPU VPNEXT_MPU 2747
-+bcmring_tablet_v1 MACH_BCMRING_TABLET_V1 BCMRING_TABLET_V1 2748
-+sgarm10 MACH_SGARM10 SGARM10 2749
-+cm_t3517 MACH_CM_T3517 CM_T3517 2750
-+omap3_cps MACH_OMAP3_CPS OMAP3_CPS 2751
-+axar1500_receiver MACH_AXAR1500_RECEIVER AXAR1500_RECEIVER 2752
-+wbd222 MACH_WBD222 WBD222 2753
-+mt65xx MACH_MT65XX MT65XX 2754
-+msm8x60_surf MACH_MSM8X60_SURF MSM8X60_SURF 2755
-+msm8x60_sim MACH_MSM8X60_SIM MSM8X60_SIM 2756
-+vmc300 MACH_VMC300 VMC300 2757
-+tcc8000_sdk MACH_TCC8000_SDK TCC8000_SDK 2758
-+nanos MACH_NANOS NANOS 2759
-+stamp9g10 MACH_STAMP9G10 STAMP9G10 2760
-+stamp9g45 MACH_STAMP9G45 STAMP9G45 2761
-+h6053 MACH_H6053 H6053 2762
-+smint01 MACH_SMINT01 SMINT01 2763
-+prtlvt2 MACH_PRTLVT2 PRTLVT2 2764
-+ap420 MACH_AP420 AP420 2765
-+htcclio MACH_HTCSHIFT HTCSHIFT 2766
-+davinci_dm365_fc MACH_DAVINCI_DM365_FC DAVINCI_DM365_FC 2767
-+msm8x55_surf MACH_MSM8X55_SURF MSM8X55_SURF 2768
-+msm8x55_ffa MACH_MSM8X55_FFA MSM8X55_FFA 2769
-+esl_vamana MACH_ESL_VAMANA ESL_VAMANA 2770
-+sbc35 MACH_SBC35 SBC35 2771
-+mpx6446 MACH_MPX6446 MPX6446 2772
-+oreo_controller MACH_OREO_CONTROLLER OREO_CONTROLLER 2773
-+kopin_models MACH_KOPIN_MODELS KOPIN_MODELS 2774
-+ttc_vision2 MACH_TTC_VISION2 TTC_VISION2 2775
-+cns3420vb MACH_CNS3420VB CNS3420VB 2776
-+lpc_evo MACH_LPC2 LPC2 2777
-+olympus MACH_OLYMPUS OLYMPUS 2778
-+vortex MACH_VORTEX VORTEX 2779
-+s5pc200 MACH_S5PC200 S5PC200 2780
-+ecucore_9263 MACH_ECUCORE_9263 ECUCORE_9263 2781
-+smdkc200 MACH_SMDKC200 SMDKC200 2782
-+emsiso_sx27 MACH_EMSISO_SX27 EMSISO_SX27 2783
-+apx_som9g45_ek MACH_APX_SOM9G45_EK APX_SOM9G45_EK 2784
-+songshan MACH_SONGSHAN SONGSHAN 2785
-+tianshan MACH_TIANSHAN TIANSHAN 2786
-+vpx500 MACH_VPX500 VPX500 2787
-+am3517sam MACH_AM3517SAM AM3517SAM 2788
-+skat91_sim508 MACH_SKAT91_SIM508 SKAT91_SIM508 2789
-+skat91_s3e MACH_SKAT91_S3E SKAT91_S3E 2790
-+omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791
-+df7220 MACH_DF7220 DF7220 2792
-+nemini MACH_NEMINI NEMINI 2793
-+t8200 MACH_T8200 T8200 2794
-+apf51 MACH_APF51 APF51 2795
-+dr_rc_unit MACH_DR_RC_UNIT DR_RC_UNIT 2796
-+bordeaux MACH_BORDEAUX BORDEAUX 2797
-+catania_b MACH_CATANIA_B CATANIA_B 2798
-+mx51_ocean MACH_MX51_OCEAN MX51_OCEAN 2799
-+ti8168evm MACH_TI8168EVM TI8168EVM 2800
-+neocoreomap MACH_NEOCOREOMAP NEOCOREOMAP 2801
-+withings_wbp MACH_WITHINGS_WBP WITHINGS_WBP 2802
-+dbps MACH_DBPS DBPS 2803
-+at91sam9261 MACH_SBC9261 SBC9261 2804
-+pcbfp0001 MACH_PCBFP0001 PCBFP0001 2805
-+speedy MACH_SPEEDY SPEEDY 2806
-+chrysaor MACH_CHRYSAOR CHRYSAOR 2807
-+tango MACH_TANGO TANGO 2808
-+synology_dsx11 MACH_SYNOLOGY_DSX11 SYNOLOGY_DSX11 2809
-+hanlin_v3ext MACH_HANLIN_V3EXT HANLIN_V3EXT 2810
-+hanlin_v5 MACH_HANLIN_V5 HANLIN_V5 2811
-+hanlin_v3plus MACH_HANLIN_V3PLUS HANLIN_V3PLUS 2812
-+iriver_story MACH_IRIVER_STORY IRIVER_STORY 2813
-+irex_iliad MACH_IREX_ILIAD IREX_ILIAD 2814
-+irex_dr1000 MACH_IREX_DR1000 IREX_DR1000 2815
-+teton_bga MACH_TETON_BGA TETON_BGA 2816
-+snapper9g45 MACH_SNAPPER9G45 SNAPPER9G45 2817
-+tam3517 MACH_TAM3517 TAM3517 2818
-+pdc100 MACH_PDC100 PDC100 2819
-+eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25 EUKREA_CPUIMX25 2820
-+eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35 EUKREA_CPUIMX35 2821
-+eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822
-+eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823
-+p565 MACH_P565 P565 2824
-+acer_a4 MACH_ACER_A4 ACER_A4 2825
-+davinci_dm368_bip MACH_DAVINCI_DM368_BIP DAVINCI_DM368_BIP 2826
-+eshare MACH_ESHARE ESHARE 2827
-+hw_omapl138_europa MACH_HW_OMAPL138_EUROPA HW_OMAPL138_EUROPA 2828
-+wlbargn MACH_WLBARGN WLBARGN 2829
-+bm170 MACH_BM170 BM170 2830
-+netspace_mini_v2 MACH_NETSPACE_MINI_V2 NETSPACE_MINI_V2 2831
-+netspace_plug_v2 MACH_NETSPACE_PLUG_V2 NETSPACE_PLUG_V2 2832
-+siemens_l1 MACH_SIEMENS_L1 SIEMENS_L1 2833
-+elv_lcu1 MACH_ELV_LCU1 ELV_LCU1 2834
-+mcu1 MACH_MCU1 MCU1 2835
-+omap3_tao3530 MACH_OMAP3_TAO3530 OMAP3_TAO3530 2836
-+omap3_pcutouch MACH_OMAP3_PCUTOUCH OMAP3_PCUTOUCH 2837
-+smdkc210 MACH_SMDKC210 SMDKC210 2838
-+omap3_braillo MACH_OMAP3_BRAILLO OMAP3_BRAILLO 2839
-+spyplug MACH_SPYPLUG SPYPLUG 2840
-+ginger MACH_GINGER GINGER 2841
-+tny_t3530 MACH_TNY_T3530 TNY_T3530 2842
-+pca102 MACH_PCA102 PCA102 2843
-+spade MACH_SPADE SPADE 2844
-+mxc25_topaz MACH_MXC25_TOPAZ MXC25_TOPAZ 2845
-+t5325 MACH_T5325 T5325 2846
-+gw2361 MACH_GW2361 GW2361 2847
-+elog MACH_ELOG ELOG 2848
-+income MACH_INCOME INCOME 2849
-+bcm589x MACH_BCM589X BCM589X 2850
-+etna MACH_ETNA ETNA 2851
-+hawks MACH_HAWKS HAWKS 2852
-+meson MACH_MESON MESON 2853
-+xsbase255 MACH_XSBASE255 XSBASE255 2854
-+pvm2030 MACH_PVM2030 PVM2030 2855
-+mioa502 MACH_MIOA502 MIOA502 2856
-+vvbox_sdorig2 MACH_VVBOX_SDORIG2 VVBOX_SDORIG2 2857
-+vvbox_sdlite2 MACH_VVBOX_SDLITE2 VVBOX_SDLITE2 2858
-+vvbox_sdpro4 MACH_VVBOX_SDPRO4 VVBOX_SDPRO4 2859
-+htc_spv_m700 MACH_HTC_SPV_M700 HTC_SPV_M700 2860
-+mx257sx MACH_MX257SX MX257SX 2861
-+goni MACH_GONI GONI 2862
-+msm8x55_svlte_ffa MACH_MSM8X55_SVLTE_FFA MSM8X55_SVLTE_FFA 2863
-+msm8x55_svlte_surf MACH_MSM8X55_SVLTE_SURF MSM8X55_SVLTE_SURF 2864
-+quickstep MACH_QUICKSTEP QUICKSTEP 2865
-+dmw96 MACH_DMW96 DMW96 2866
-+hammerhead MACH_HAMMERHEAD HAMMERHEAD 2867
-+trident MACH_TRIDENT TRIDENT 2868
-+lightning MACH_LIGHTNING LIGHTNING 2869
-+iconnect MACH_ICONNECT ICONNECT 2870
-+autobot MACH_AUTOBOT AUTOBOT 2871
-+coconut MACH_COCONUT COCONUT 2872
-+durian MACH_DURIAN DURIAN 2873
-+cayenne MACH_CAYENNE CAYENNE 2874
-+fuji MACH_FUJI FUJI 2875
-+synology_6282 MACH_SYNOLOGY_6282 SYNOLOGY_6282 2876
-+em1sy MACH_EM1SY EM1SY 2877
-+m502 MACH_M502 M502 2878
-+matrix518 MACH_MATRIX518 MATRIX518 2879
-+tiny_gurnard MACH_TINY_GURNARD TINY_GURNARD 2880
-+spear1310 MACH_SPEAR1310 SPEAR1310 2881
-+bv07 MACH_BV07 BV07 2882
-+mxt_td61 MACH_MXT_TD61 MXT_TD61 2883
-+openrd_ultimate MACH_OPENRD_ULTIMATE OPENRD_ULTIMATE 2884
-+devixp MACH_DEVIXP DEVIXP 2885
-+miccpt MACH_MICCPT MICCPT 2886
-+mic256 MACH_MIC256 MIC256 2887
-+as1167 MACH_AS1167 AS1167 2888
-+omap3_ibiza MACH_OMAP3_IBIZA OMAP3_IBIZA 2889
-+u5500 MACH_U5500 U5500 2890
-+davinci_picto MACH_DAVINCI_PICTO DAVINCI_PICTO 2891
-+mecha MACH_MECHA MECHA 2892
-+bubba3 MACH_BUBBA3 BUBBA3 2893
-+pupitre MACH_PUPITRE PUPITRE 2894
-+tegra_harmony MACH_TEGRA_HARMONY TEGRA_HARMONY 2895
-+tegra_vogue MACH_TEGRA_VOGUE TEGRA_VOGUE 2896
-+tegra_e1165 MACH_TEGRA_E1165 TEGRA_E1165 2897
-+simplenet MACH_SIMPLENET SIMPLENET 2898
-+ec4350tbm MACH_EC4350TBM EC4350TBM 2899
-+pec_tc MACH_PEC_TC PEC_TC 2900
-+pec_hc2 MACH_PEC_HC2 PEC_HC2 2901
-+esl_mobilis_a MACH_ESL_MOBILIS_A ESL_MOBILIS_A 2902
-+esl_mobilis_b MACH_ESL_MOBILIS_B ESL_MOBILIS_B 2903
-+esl_wave_a MACH_ESL_WAVE_A ESL_WAVE_A 2904
-+esl_wave_b MACH_ESL_WAVE_B ESL_WAVE_B 2905
-+unisense_mmm MACH_UNISENSE_MMM UNISENSE_MMM 2906
-+blueshark MACH_BLUESHARK BLUESHARK 2907
-+e10 MACH_E10 E10 2908
---- a/arch/arm/include/asm/thread_info.h
-+++ b/arch/arm/include/asm/thread_info.h
-@@ -115,7 +115,8 @@ extern void iwmmxt_task_restore(struct t
- extern void iwmmxt_task_release(struct thread_info *);
- extern void iwmmxt_task_switch(struct thread_info *);
-
--extern void vfp_sync_state(struct thread_info *thread);
-+extern void vfp_sync_hwstate(struct thread_info *);
-+extern void vfp_flush_hwstate(struct thread_info *);
-
- #endif
-
---- a/arch/arm/kernel/ptrace.c
-+++ b/arch/arm/kernel/ptrace.c
-@@ -663,7 +663,7 @@ static int ptrace_getvfpregs(struct task
- union vfp_state *vfp = &thread->vfpstate;
- struct user_vfp __user *ufp = data;
-
-- vfp_sync_state(thread);
-+ vfp_sync_hwstate(thread);
-
- /* copy the floating point registers */
- if (copy_to_user(&ufp->fpregs, &vfp->hard.fpregs,
-@@ -686,7 +686,7 @@ static int ptrace_setvfpregs(struct task
- union vfp_state *vfp = &thread->vfpstate;
- struct user_vfp __user *ufp = data;
-
-- vfp_sync_state(thread);
-+ vfp_sync_hwstate(thread);
-
- /* copy the floating point registers */
- if (copy_from_user(&vfp->hard.fpregs, &ufp->fpregs,
-@@ -697,6 +697,8 @@ static int ptrace_setvfpregs(struct task
- if (get_user(vfp->hard.fpscr, &ufp->fpscr))
- return -EFAULT;
-
-+ vfp_flush_hwstate(thread);
-+
- return 0;
- }
- #endif
---- a/arch/arm/vfp/entry.S
-+++ b/arch/arm/vfp/entry.S
-@@ -42,6 +42,7 @@ ENTRY(vfp_null_entry)
- mov pc, lr
- ENDPROC(vfp_null_entry)
-
-+ .align 2
- .LCvfp:
- .word vfp_vector
-
-@@ -61,6 +62,7 @@ ENTRY(vfp_testing_entry)
- mov pc, r9 @ we have handled the fault
- ENDPROC(vfp_testing_entry)
-
-+ .align 2
- VFP_arch_address:
- .word VFP_arch
-
---- a/arch/arm/vfp/vfphw.S
-+++ b/arch/arm/vfp/vfphw.S
-@@ -209,40 +209,55 @@ ENDPROC(vfp_save_state)
- last_VFP_context_address:
- .word last_VFP_context
-
--ENTRY(vfp_get_float)
-- add pc, pc, r0, lsl #3
-+ .macro tbl_branch, base, tmp, shift
-+#ifdef CONFIG_THUMB2_KERNEL
-+ adr \tmp, 1f
-+ add \tmp, \tmp, \base, lsl \shift
-+ mov pc, \tmp
-+#else
-+ add pc, pc, \base, lsl \shift
- mov r0, r0
-+#endif
-+1:
-+ .endm
-+
-+ENTRY(vfp_get_float)
-+ tbl_branch r0, r3, #3
- .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-- mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0
-+1: mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0
- mov pc, lr
-- mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1
-+ .org 1b + 8
-+1: mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1
- mov pc, lr
-+ .org 1b + 8
- .endr
- ENDPROC(vfp_get_float)
-
- ENTRY(vfp_put_float)
-- add pc, pc, r1, lsl #3
-- mov r0, r0
-+ tbl_branch r1, r3, #3
- .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-- mcr p10, 0, r0, c\dr, c0, 0 @ fmsr r0, s0
-+1: mcr p10, 0, r0, c\dr, c0, 0 @ fmsr r0, s0
- mov pc, lr
-- mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1
-+ .org 1b + 8
-+1: mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1
- mov pc, lr
-+ .org 1b + 8
- .endr
- ENDPROC(vfp_put_float)
-
- ENTRY(vfp_get_double)
-- add pc, pc, r0, lsl #3
-- mov r0, r0
-+ tbl_branch r0, r3, #3
- .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-- fmrrd r0, r1, d\dr
-+1: fmrrd r0, r1, d\dr
- mov pc, lr
-+ .org 1b + 8
- .endr
- #ifdef CONFIG_VFPv3
- @ d16 - d31 registers
- .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-- mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr
-+1: mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr
- mov pc, lr
-+ .org 1b + 8
- .endr
- #endif
-
-@@ -253,17 +268,18 @@ ENTRY(vfp_get_double)
- ENDPROC(vfp_get_double)
-
- ENTRY(vfp_put_double)
-- add pc, pc, r2, lsl #3
-- mov r0, r0
-+ tbl_branch r2, r3, #3
- .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-- fmdrr d\dr, r0, r1
-+1: fmdrr d\dr, r0, r1
- mov pc, lr
-+ .org 1b + 8
- .endr
- #ifdef CONFIG_VFPv3
- @ d16 - d31 registers
- .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-- mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr
-+1: mcrr p11, 3, r0, r1, c\dr @ fmdrr r0, r1, d\dr
- mov pc, lr
-+ .org 1b + 8
- .endr
- #endif
- ENDPROC(vfp_put_double)
---- a/arch/arm/vfp/vfpmodule.c
-+++ b/arch/arm/vfp/vfpmodule.c
-@@ -38,16 +38,75 @@ union vfp_state *last_VFP_context[NR_CPU
- */
- unsigned int VFP_arch;
-
-+/*
-+ * Per-thread VFP initialization.
-+ */
-+static void vfp_thread_flush(struct thread_info *thread)
-+{
-+ union vfp_state *vfp = &thread->vfpstate;
-+ unsigned int cpu;
-+
-+ memset(vfp, 0, sizeof(union vfp_state));
-+
-+ vfp->hard.fpexc = FPEXC_EN;
-+ vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
-+
-+ /*
-+ * Disable VFP to ensure we initialize it first. We must ensure
-+ * that the modification of last_VFP_context[] and hardware disable
-+ * are done for the same CPU and without preemption.
-+ */
-+ cpu = get_cpu();
-+ if (last_VFP_context[cpu] == vfp)
-+ last_VFP_context[cpu] = NULL;
-+ fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
-+ put_cpu();
-+}
-+
-+static void vfp_thread_exit(struct thread_info *thread)
-+{
-+ /* release case: Per-thread VFP cleanup. */
-+ union vfp_state *vfp = &thread->vfpstate;
-+ unsigned int cpu = get_cpu();
-+
-+ if (last_VFP_context[cpu] == vfp)
-+ last_VFP_context[cpu] = NULL;
-+ put_cpu();
-+}
-+
-+/*
-+ * When this function is called with the following 'cmd's, the following
-+ * is true while this function is being run:
-+ * THREAD_NOFTIFY_SWTICH:
-+ * - the previously running thread will not be scheduled onto another CPU.
-+ * - the next thread to be run (v) will not be running on another CPU.
-+ * - thread->cpu is the local CPU number
-+ * - not preemptible as we're called in the middle of a thread switch
-+ * THREAD_NOTIFY_FLUSH:
-+ * - the thread (v) will be running on the local CPU, so
-+ * v === current_thread_info()
-+ * - thread->cpu is the local CPU number at the time it is accessed,
-+ * but may change at any time.
-+ * - we could be preempted if tree preempt rcu is enabled, so
-+ * it is unsafe to use thread->cpu.
-+ * THREAD_NOTIFY_EXIT
-+ * - the thread (v) will be running on the local CPU, so
-+ * v === current_thread_info()
-+ * - thread->cpu is the local CPU number at the time it is accessed,
-+ * but may change at any time.
-+ * - we could be preempted if tree preempt rcu is enabled, so
-+ * it is unsafe to use thread->cpu.
-+ */
- static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
- {
- struct thread_info *thread = v;
-- union vfp_state *vfp;
-- __u32 cpu = thread->cpu;
-
- if (likely(cmd == THREAD_NOTIFY_SWITCH)) {
- u32 fpexc = fmrx(FPEXC);
-
- #ifdef CONFIG_SMP
-+ unsigned int cpu = thread->cpu;
-+
- /*
- * On SMP, if VFP is enabled, save the old state in
- * case the thread migrates to a different CPU. The
-@@ -74,25 +133,10 @@ static int vfp_notifier(struct notifier_
- return NOTIFY_DONE;
- }
-
-- vfp = &thread->vfpstate;
-- if (cmd == THREAD_NOTIFY_FLUSH) {
-- /*
-- * Per-thread VFP initialisation.
-- */
-- memset(vfp, 0, sizeof(union vfp_state));
--
-- vfp->hard.fpexc = FPEXC_EN;
-- vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
--
-- /*
-- * Disable VFP to ensure we initialise it first.
-- */
-- fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
-- }
--
-- /* flush and release case: Per-thread VFP cleanup. */
-- if (last_VFP_context[cpu] == vfp)
-- last_VFP_context[cpu] = NULL;
-+ if (cmd == THREAD_NOTIFY_FLUSH)
-+ vfp_thread_flush(thread);
-+ else
-+ vfp_thread_exit(thread);
-
- return NOTIFY_DONE;
- }
-@@ -153,10 +197,13 @@ static void vfp_raise_exceptions(u32 exc
- }
-
- /*
-- * Update the FPSCR with the additional exception flags.
-+ * If any of the status flags are set, update the FPSCR.
- * Comparison instructions always return at least one of
- * these flags set.
- */
-+ if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
-+ fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
-+
- fpscr |= exceptions;
-
- fmxr(FPSCR, fpscr);
-@@ -381,54 +428,60 @@ static void vfp_pm_init(void)
- static inline void vfp_pm_init(void) { }
- #endif /* CONFIG_PM */
-
--/*
-- * Synchronise the hardware VFP state of a thread other than current with the
-- * saved one. This function is used by the ptrace mechanism.
-- */
--#ifdef CONFIG_SMP
--void vfp_sync_state(struct thread_info *thread)
-+void vfp_sync_hwstate(struct thread_info *thread)
- {
-+ unsigned int cpu = get_cpu();
-+
- /*
-- * On SMP systems, the VFP state is automatically saved at every
-- * context switch. We mark the thread VFP state as belonging to a
-- * non-existent CPU so that the saved one will be reloaded when
-- * needed.
-+ * If the thread we're interested in is the current owner of the
-+ * hardware VFP state, then we need to save its state.
- */
-- thread->vfpstate.hard.cpu = NR_CPUS;
-+ if (last_VFP_context[cpu] == &thread->vfpstate) {
-+ u32 fpexc = fmrx(FPEXC);
-+
-+ /*
-+ * Save the last VFP state on this CPU.
-+ */
-+ fmxr(FPEXC, fpexc | FPEXC_EN);
-+ vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN);
-+ fmxr(FPEXC, fpexc);
-+ }
-+
-+ put_cpu();
- }
--#else
--void vfp_sync_state(struct thread_info *thread)
-+
-+void vfp_flush_hwstate(struct thread_info *thread)
- {
- unsigned int cpu = get_cpu();
-- u32 fpexc = fmrx(FPEXC);
-
- /*
-- * If VFP is enabled, the previous state was already saved and
-- * last_VFP_context updated.
-+ * If the thread we're interested in is the current owner of the
-+ * hardware VFP state, then we need to save its state.
- */
-- if (fpexc & FPEXC_EN)
-- goto out;
-+ if (last_VFP_context[cpu] == &thread->vfpstate) {
-+ u32 fpexc = fmrx(FPEXC);
-
-- if (!last_VFP_context[cpu])
-- goto out;
-+ fmxr(FPEXC, fpexc & ~FPEXC_EN);
-
-- /*
-- * Save the last VFP state on this CPU.
-- */
-- fmxr(FPEXC, fpexc | FPEXC_EN);
-- vfp_save_state(last_VFP_context[cpu], fpexc);
-- fmxr(FPEXC, fpexc);
-+ /*
-+ * Set the context to NULL to force a reload the next time
-+ * the thread uses the VFP.
-+ */
-+ last_VFP_context[cpu] = NULL;
-+ }
-
-+#ifdef CONFIG_SMP
- /*
-- * Set the context to NULL to force a reload the next time the thread
-- * uses the VFP.
-+ * For SMP we still have to take care of the case where the thread
-+ * migrates to another CPU and then back to the original CPU on which
-+ * the last VFP user is still the same thread. Mark the thread VFP
-+ * state as belonging to a non-existent CPU so that the saved one will
-+ * be reloaded in the above case.
- */
-- last_VFP_context[cpu] = NULL;
--
--out:
-+ thread->vfpstate.hard.cpu = NR_CPUS;
-+#endif
- put_cpu();
- }
--#endif
-
- #include <linux/smp.h>
-
-@@ -481,7 +534,7 @@ static int __init vfp_init(void)
- */
- elf_hwcap |= HWCAP_VFP;
- #ifdef CONFIG_VFPv3
-- if (VFP_arch >= 3) {
-+ if (VFP_arch >= 2) {
- elf_hwcap |= HWCAP_VFPv3;
-
- /*
---- /dev/null
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -0,0 +1,360 @@
-+/*******************************************************************************
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ *
-+ ******************************************************************************/
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/ptrace.h>
-+#include <linux/slab.h>
-+#include <linux/ioport.h>
-+#include <linux/interrupt.h>
-+#include <linux/spinlock.h>
-+#include <linux/init.h>
-+
-+#include <mach/hardware.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+#include <asm/mach/pci.h>
-+#include <mach/pcie.h>
-+#include <linux/proc_fs.h>
-+#include <linux/delay.h>
-+#include <asm/uaccess.h>
-+#include <mach/pm.h>
-+
-+DEFINE_SPINLOCK(pci_config_lock);
-+
-+static int pcie_linked[2] = {0, 0}; // if 1, mean link ok.
-+
-+u32 cns3xxx_pcie0_irqs[2] = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, };
-+u32 cns3xxx_pcie1_irqs[2] = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, };
-+
-+static u32 access_base[2][3] = {
-+ { CNS3XXX_PCIE0_HOST_BASE_VIRT, CNS3XXX_PCIE0_CFG0_BASE_VIRT, CNS3XXX_PCIE0_CFG1_BASE_VIRT},
-+ { CNS3XXX_PCIE1_HOST_BASE_VIRT, CNS3XXX_PCIE1_CFG0_BASE_VIRT, CNS3XXX_PCIE1_CFG1_BASE_VIRT},
-+};
-+
-+static int cns3xxx_pci_cfg_base(struct pci_bus *bus,
-+ unsigned int devfn, int where)
-+{
-+ int domain = pci_domain_nr(bus);
-+ int slot = PCI_SLOT(devfn);
-+ u32 base;
-+
-+ if ((!pcie_linked[domain]) && (bus->number || slot))
-+ return 0;
-+
-+ if (!(bus->number)) {
-+ if (slot > 1)
-+ return 0;
-+ // CFG0 Type
-+ base = access_base[domain][slot];
-+ } else {
-+ // CFG1 Type
-+ base = access_base[domain][2];
-+ }
-+ base += (((bus->number & 0xf) << 20)| (devfn << 12) | (where & 0xfc));
-+ return base;
-+}
-+
-+static int cns3xxx_pci_read_config(struct pci_bus *bus,
-+ unsigned int devfn, int where, int size,
-+ u32 * val)
-+{
-+ u32 v = 0xffffffff;
-+ u32 base;
-+ u32 mask = (0x1ull << (size * 8)) - 1;
-+ int shift = (where % 4) * 8;
-+
-+ base = cns3xxx_pci_cfg_base(bus, devfn, where);
-+ if (!base) {
-+ *val = 0xFFFFFFFF;
-+ return PCIBIOS_SUCCESSFUL;
-+ }
-+
-+ v = __raw_readl(base);
-+ if (bus->number == 0 && devfn == 0 &&
-+ (where & 0xffc) == PCI_CLASS_REVISION) {
-+ /* RC's class is 0xb, but Linux PCI driver needs 0x604 for a PCIe bridge. */
-+ /* So we must dedicate the class code to 0x604 here */
-+ v &= 0xff;
-+ v |= (0x604 << 16);
-+ }
-+
-+ *val = (v >> shift) & mask;
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int cns3xxx_pci_write_config(struct pci_bus *bus,
-+ unsigned int devfn, int where, int size,
-+ u32 val)
-+{
-+ u32 v;
-+ u32 base;
-+ u32 mask = (0x1ull << (size * 8)) - 1;
-+ int shift = (where % 4) * 8;
-+
-+ base = cns3xxx_pci_cfg_base(bus, devfn, where);
-+ if (!base)
-+ return PCIBIOS_SUCCESSFUL;
-+
-+ v = __raw_readl(base);
-+ v &= ~(mask << shift);
-+ v |= (val & mask) << shift;
-+ __raw_writel(v, base);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static struct pci_ops cns3xxx_pcie_ops = {
-+ .read = cns3xxx_pci_read_config,
-+ .write = cns3xxx_pci_write_config,
-+};
-+
-+static struct resource cns3xxx_pcie0_io = {
-+ .name = "PCIe0 I/O space",
-+ .start = PCIE0_IO_SPACE_START,
-+ .end = PCIE0_IO_SPACE_END,
-+ .flags = IORESOURCE_IO,
-+};
-+
-+static struct resource cns3xxx_pcie1_io = {
-+ .name = "PCIe1 I/O space",
-+ .start = PCIE1_IO_SPACE_START,
-+ .end = PCIE1_IO_SPACE_END,
-+ .flags = IORESOURCE_IO,
-+};
-+
-+static struct resource cns3xxx_pcie0_mem = {
-+ .name = "PCIe0 non-prefetchable",
-+ .start = PCIE0_MEM_SPACE_START,
-+ .end = PCIE0_MEM_SPACE_END,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource cns3xxx_pcie1_mem = {
-+ .name = "PCIe1 non-prefetchable",
-+ .start = PCIE1_MEM_SPACE_START,
-+ .end = PCIE1_MEM_SPACE_END,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static int __init cns3xxx_pci_setup_resources(int nr, struct resource **resource)
-+{
-+ if(nr==0){
-+ BUG_ON(request_resource(&iomem_resource, &cns3xxx_pcie0_io) ||
-+ request_resource(&iomem_resource, &cns3xxx_pcie0_mem));
-+ resource[0] = &cns3xxx_pcie0_io;
-+ resource[1] = &cns3xxx_pcie0_mem;
-+ }else{
-+ BUG_ON(request_resource(&iomem_resource, &cns3xxx_pcie1_io) ||
-+ request_resource(&iomem_resource, &cns3xxx_pcie1_mem));
-+ resource[0] = &cns3xxx_pcie1_io;
-+ resource[1] = &cns3xxx_pcie1_mem;
-+ }
-+ return 0;
-+}
-+
-+int __init cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
-+{
-+ BUG_ON(cns3xxx_pci_setup_resources(sys->domain,sys->resource));
-+ return 1;
-+}
-+
-+struct pci_bus *cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys)
-+{
-+ struct pci_bus *ret;
-+ ret = pci_scan_bus(sys->busnr, &cns3xxx_pcie_ops, sys);
-+ pci_assign_unassigned_resources();
-+ return ret;
-+}
-+
-+/*
-+ * CNS3XXX PCIe device don't support hotplugin, and we will check the link at start up.
-+ *
-+ */
-+static void cns3xxx_pcie_check_link(int port)
-+{
-+
-+ u32 reg;
-+ u32 time;
-+
-+ time = jiffies; /* set the start time for the receive */
-+ while (1) {
-+ reg = __raw_readl( port == 0 ? CNS3XXX_PCIE0_PM_DEBUG : CNS3XXX_PCIE1_PM_DEBUG); /* check link up */
-+ reg = __raw_readl( port == 0 ? CNS3XXX_PCIE0_PM_DEBUG : CNS3XXX_PCIE1_PM_DEBUG);
-+ if (reg & 0x1) {
-+ pcie_linked[port]++;
-+ break;
-+ } else if (time_after(jiffies, (unsigned long)(time + 50))) {
-+ break;
-+ }
-+ }
-+
-+}
-+
-+static void cns3xxx_pcie_hw_init(int port){
-+ struct pci_bus bus;
-+ struct pci_sys_data sd;
-+ u32 devfn = 0;
-+ u8 pri_bus, sec_bus, sub_bus;
-+ u8 cp, u8tmp;
-+ u16 u16tmp,pos,dc;
-+ u32 mem_base, host_base, io_base, cfg0_base;
-+
-+ bus.number = 0;
-+ bus.ops = &cns3xxx_pcie_ops;
-+ sd.domain = port;
-+ bus.sysdata = &sd;
-+
-+ mem_base = ( port == 0 ? CNS3XXX_PCIE0_MEM_BASE : CNS3XXX_PCIE1_MEM_BASE );
-+ mem_base = mem_base >> 16;
-+
-+ io_base = ( port == 0 ? CNS3XXX_PCIE0_IO_BASE : CNS3XXX_PCIE1_IO_BASE );
-+ io_base = io_base >> 16;
-+
-+ host_base = ( port == 0 ? CNS3XXX_PCIE0_HOST_BASE_VIRT : CNS3XXX_PCIE1_HOST_BASE_VIRT );
-+ host_base = ( host_base -1 ) >> 16;
-+
-+ cfg0_base = ( port == 0 ? CNS3XXX_PCIE0_CFG0_BASE_VIRT : CNS3XXX_PCIE1_CFG0_BASE_VIRT );
-+ cfg0_base = ( cfg0_base -1 ) >> 16;
-+
-+ pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0);
-+ pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1);
-+ pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1);
-+
-+ pci_bus_read_config_byte(&bus, devfn, PCI_PRIMARY_BUS, &pri_bus);
-+ pci_bus_read_config_byte(&bus, devfn, PCI_SECONDARY_BUS, &sec_bus);
-+ pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &sub_bus);
-+
-+ pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base);
-+ pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, host_base);
-+ pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base);
-+ pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, cfg0_base);
-+
-+ pci_bus_read_config_byte(&bus, devfn, PCI_CAPABILITY_LIST, &cp);
-+ while (cp != 0) {
-+ pci_bus_read_config_byte(&bus, devfn, cp, &u8tmp);
-+ // Read Next ID
-+ pci_bus_read_config_word(&bus, devfn, cp, &u16tmp);
-+ cp = (u16tmp & 0xFF00) >> 8;
-+ }
-+
-+ /* Modify device's Max_Read_Request size */
-+ devfn = PCI_DEVFN(1,0);
-+ if (!pcie_linked[port])
-+ return;
-+
-+ pci_bus_read_config_byte(&bus, devfn, PCI_CAPABILITY_LIST, &cp);
-+ while (cp != 0) {
-+ pci_bus_read_config_byte(&bus, devfn, cp, &u8tmp);
-+ // Read Next ID
-+ pci_bus_read_config_word(&bus, devfn, cp, &u16tmp);
-+ cp = (u16tmp & 0xFF00) >> 8;
-+ }
-+
-+ /* Set Device Max_Read_Request_Size to 128 byte */
-+ pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP);
-+ pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
-+ dc &= ~(0x3 << 12); /* Clear Device Control Register [14:12] */
-+ pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc);
-+ pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
-+
-+ if (!port) {
-+ /* Disable PCIe0 Interrupt Mask INTA to INTD */
-+ __raw_writel(~0x3FFF, CNS3XXX_MISC_BASE_VIRT + 0x978);
-+ } else {
-+ /* Disable PCIe1 Interrupt Mask INTA to INTD */
-+ __raw_writel(~0x3FFF, CNS3XXX_MISC_BASE_VIRT + 0xA78);
-+ }
-+}
-+
-+
-+void __init cns3xxx_pcie0_preinit(void)
-+{
-+ cns3xxx_pcie_check_link(0);
-+ cns3xxx_pcie_hw_init(0);
-+}
-+
-+void __init cns3xxx_pcie1_preinit(void)
-+{
-+ cns3xxx_pcie_check_link(1);
-+ cns3xxx_pcie_hw_init(1);
-+}
-+
-+/*
-+ * map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this.
-+ */
-+
-+static int __init cns3xxx_pcie0_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return cns3xxx_pcie0_irqs[slot];
-+}
-+
-+static int __init cns3xxx_pcie1_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return cns3xxx_pcie1_irqs[slot];
-+}
-+
-+static struct hw_pci cns3xxx_pcie[2] __initdata = {
-+ {
-+ .swizzle = pci_std_swizzle,
-+ .map_irq = cns3xxx_pcie0_map_irq,
-+ .nr_controllers = 1,
-+ .nr_domains = 0,
-+ .setup = cns3xxx_pci_setup,
-+ .scan = cns3xxx_pci_scan_bus,
-+ .preinit = cns3xxx_pcie0_preinit,
-+ },
-+ {
-+ .swizzle = pci_std_swizzle,
-+ .map_irq = cns3xxx_pcie1_map_irq,
-+ .nr_controllers = 1,
-+ .nr_domains = 1,
-+ .setup = cns3xxx_pci_setup,
-+ .scan = cns3xxx_pci_scan_bus,
-+ .preinit = cns3xxx_pcie1_preinit,
-+ }
-+};
-+
-+static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
-+ struct pt_regs *regs)
-+{
-+ if (fsr & (1 << 10))
-+ regs->ARM_pc += 4;
-+ return 0;
-+}
-+
-+//extern void pci_common_init(struct hw_pci *);
-+int cns3xxx_pcie_init(u8 ports)
-+{
-+ hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, "imprecise external abort");
-+
-+ if (ports & 0x1)
-+ pci_common_init(&cns3xxx_pcie[0]);
-+ if (ports & 0x2)
-+ pci_common_init(&cns3xxx_pcie[1]);
-+
-+ return 0;
-+}
-+
-+//device_initcall(cns3xxx_pcie_init);
+++ /dev/null
---- /dev/null
-+++ b/drivers/hwmon/gsp.c
-@@ -0,0 +1,310 @@
-+/*
-+ * A hwmon driver for the Gateworks System Peripheral
-+ * Copyright (C) 2009 Gateworks Corporation
-+ *
-+ * Author: Chris Lang <clang@gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License,
-+ * as published by the Free Software Foundation - version 2.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/i2c.h>
-+#include <linux/hwmon.h>
-+#include <linux/hwmon-sysfs.h>
-+#include <linux/err.h>
-+
-+
-+#define DRV_VERSION "0.2"
-+
-+enum chips { gsp };
-+
-+/* AD7418 registers */
-+#define GSP_REG_TEMP_IN 0x00
-+#define GSP_REG_VIN 0x02
-+#define GSP_REG_3P3 0x05
-+#define GSP_REG_BAT 0x08
-+#define GSP_REG_5P0 0x0b
-+#define GSP_REG_CORE 0x0e
-+#define GSP_REG_CPU1 0x11
-+#define GSP_REG_CPU2 0x14
-+#define GSP_REG_DRAM 0x17
-+#define GSP_REG_EXT_BAT 0x1a
-+#define GSP_REG_IO1 0x1d
-+#define GSP_REG_IO2 0x20
-+#define GSP_REG_PCIE 0x23
-+#define GSP_REG_CURRENT 0x26
-+#define GSP_FAN_0 0x2C
-+#define GSP_FAN_1 0x2E
-+#define GSP_FAN_2 0x30
-+#define GSP_FAN_3 0x32
-+#define GSP_FAN_4 0x34
-+#define GSP_FAN_5 0x36
-+
-+struct gsp_sensor_info {
-+ const char* name;
-+ int reg;
-+};
-+
-+static const struct gsp_sensor_info gsp_sensors[] = {
-+ {"temp", GSP_REG_TEMP_IN},
-+ {"vin", GSP_REG_VIN},
-+ {"3p3", GSP_REG_3P3},
-+ {"bat", GSP_REG_BAT},
-+ {"5p0", GSP_REG_5P0},
-+ {"core", GSP_REG_CORE},
-+ {"cpu1", GSP_REG_CPU1},
-+ {"cpu2", GSP_REG_CPU2},
-+ {"dram", GSP_REG_DRAM},
-+ {"ext_bat", GSP_REG_EXT_BAT},
-+ {"io1", GSP_REG_IO1},
-+ {"io2", GSP_REG_IO2},
-+ {"pci2", GSP_REG_PCIE},
-+ {"current", GSP_REG_CURRENT},
-+ {"fan_point0", GSP_FAN_0},
-+ {"fan_point1", GSP_FAN_1},
-+ {"fan_point2", GSP_FAN_2},
-+ {"fan_point3", GSP_FAN_3},
-+ {"fan_point4", GSP_FAN_4},
-+ {"fan_point5", GSP_FAN_5},
-+};
-+
-+struct gsp_data {
-+ struct device *hwmon_dev;
-+ struct attribute_group attrs;
-+ enum chips type;
-+};
-+
-+static int gsp_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id);
-+static int gsp_remove(struct i2c_client *client);
-+
-+static const struct i2c_device_id gsp_id[] = {
-+ { "gsp", 0 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(i2c, gsp_id);
-+
-+static struct i2c_driver gsp_driver = {
-+ .driver = {
-+ .name = "gsp",
-+ },
-+ .probe = gsp_probe,
-+ .remove = gsp_remove,
-+ .id_table = gsp_id,
-+};
-+
-+/* All registers are word-sized, except for the configuration registers.
-+ * AD7418 uses a high-byte first convention. Do NOT use those functions to
-+ * access the configuration registers CONF and CONF2, as they are byte-sized.
-+ */
-+static inline int gsp_read(struct i2c_client *client, u8 reg)
-+{
-+ unsigned int adc = 0;
-+ if (reg == GSP_REG_TEMP_IN || reg > GSP_REG_CURRENT)
-+ {
-+ adc |= i2c_smbus_read_byte_data(client, reg);
-+ adc |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
-+ return adc;
-+ }
-+ else
-+ {
-+ adc |= i2c_smbus_read_byte_data(client, reg);
-+ adc |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
-+ adc |= i2c_smbus_read_byte_data(client, reg + 2) << 16;
-+ return adc;
-+ }
-+}
-+
-+static inline int gsp_write(struct i2c_client *client, u8 reg, u16 value)
-+{
-+ i2c_smbus_write_byte_data(client, reg, value & 0xff);
-+ i2c_smbus_write_byte_data(client, reg + 1, ((value >> 8) & 0xff));
-+ return 1;
-+}
-+
-+static ssize_t show_adc(struct device *dev, struct device_attribute *devattr,
-+ char *buf)
-+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-+ struct i2c_client *client = to_i2c_client(dev);
-+ return sprintf(buf, "%d\n", gsp_read(client, gsp_sensors[attr->index].reg));
-+}
-+
-+static ssize_t show_label(struct device *dev,
-+ struct device_attribute *devattr, char *buf)
-+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-+
-+ return sprintf(buf, "%s\n", gsp_sensors[attr->index].name);
-+}
-+
-+static ssize_t store_fan(struct device *dev,
-+ struct device_attribute *devattr, const char *buf, size_t count)
-+{
-+ u16 val;
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-+ struct i2c_client *client = to_i2c_client(dev);
-+ val = simple_strtoul(buf, NULL, 10);
-+ gsp_write(client, gsp_sensors[attr->index].reg, val);
-+ return count;
-+}
-+
-+static SENSOR_DEVICE_ATTR(temp0_input, S_IRUGO, show_adc, NULL, 0);
-+static SENSOR_DEVICE_ATTR(temp0_label, S_IRUGO, show_label, NULL, 0);
-+
-+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_adc, NULL, 1);
-+static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_label, NULL, 1);
-+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_adc, NULL, 2);
-+static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_label, NULL, 2);
-+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_adc, NULL, 3);
-+static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_label, NULL, 3);
-+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_adc, NULL, 4);
-+static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 4);
-+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_adc, NULL, 5);
-+static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_label, NULL, 5);
-+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_adc, NULL, 6);
-+static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_label, NULL, 6);
-+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_adc, NULL, 7);
-+static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_label, NULL, 7);
-+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_adc, NULL, 8);
-+static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 8);
-+static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_adc, NULL, 9);
-+static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 9);
-+static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_adc, NULL, 10);
-+static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 10);
-+static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_adc, NULL, 11);
-+static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_label, NULL, 11);
-+static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_adc, NULL, 12);
-+static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_label, NULL, 12);
-+static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_adc, NULL, 13);
-+static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_label, NULL, 13);
-+
-+static SENSOR_DEVICE_ATTR(fan0_point0, S_IRUGO | S_IWUSR, show_adc, store_fan, 14);
-+static SENSOR_DEVICE_ATTR(fan0_point1, S_IRUGO | S_IWUSR, show_adc, store_fan, 15);
-+static SENSOR_DEVICE_ATTR(fan0_point2, S_IRUGO | S_IWUSR, show_adc, store_fan, 16);
-+static SENSOR_DEVICE_ATTR(fan0_point3, S_IRUGO | S_IWUSR, show_adc, store_fan, 17);
-+static SENSOR_DEVICE_ATTR(fan0_point4, S_IRUGO | S_IWUSR, show_adc, store_fan, 18);
-+static SENSOR_DEVICE_ATTR(fan0_point5, S_IRUGO | S_IWUSR, show_adc, store_fan, 19);
-+
-+
-+
-+static struct attribute *gsp_attributes[] = {
-+ &sensor_dev_attr_temp0_input.dev_attr.attr,
-+ &sensor_dev_attr_in0_input.dev_attr.attr,
-+ &sensor_dev_attr_in1_input.dev_attr.attr,
-+ &sensor_dev_attr_in2_input.dev_attr.attr,
-+ &sensor_dev_attr_in3_input.dev_attr.attr,
-+ &sensor_dev_attr_in4_input.dev_attr.attr,
-+ &sensor_dev_attr_in5_input.dev_attr.attr,
-+ &sensor_dev_attr_in6_input.dev_attr.attr,
-+ &sensor_dev_attr_in7_input.dev_attr.attr,
-+ &sensor_dev_attr_in8_input.dev_attr.attr,
-+ &sensor_dev_attr_in9_input.dev_attr.attr,
-+ &sensor_dev_attr_in10_input.dev_attr.attr,
-+ &sensor_dev_attr_in11_input.dev_attr.attr,
-+ &sensor_dev_attr_in12_input.dev_attr.attr,
-+
-+ &sensor_dev_attr_temp0_label.dev_attr.attr,
-+ &sensor_dev_attr_in0_label.dev_attr.attr,
-+ &sensor_dev_attr_in1_label.dev_attr.attr,
-+ &sensor_dev_attr_in2_label.dev_attr.attr,
-+ &sensor_dev_attr_in3_label.dev_attr.attr,
-+ &sensor_dev_attr_in4_label.dev_attr.attr,
-+ &sensor_dev_attr_in5_label.dev_attr.attr,
-+ &sensor_dev_attr_in6_label.dev_attr.attr,
-+ &sensor_dev_attr_in7_label.dev_attr.attr,
-+ &sensor_dev_attr_in8_label.dev_attr.attr,
-+ &sensor_dev_attr_in9_label.dev_attr.attr,
-+ &sensor_dev_attr_in10_label.dev_attr.attr,
-+ &sensor_dev_attr_in11_label.dev_attr.attr,
-+ &sensor_dev_attr_in12_label.dev_attr.attr,
-+
-+ &sensor_dev_attr_fan0_point0.dev_attr.attr,
-+ &sensor_dev_attr_fan0_point1.dev_attr.attr,
-+ &sensor_dev_attr_fan0_point2.dev_attr.attr,
-+ &sensor_dev_attr_fan0_point3.dev_attr.attr,
-+ &sensor_dev_attr_fan0_point4.dev_attr.attr,
-+ &sensor_dev_attr_fan0_point5.dev_attr.attr,
-+
-+ NULL
-+};
-+
-+
-+static int gsp_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ struct i2c_adapter *adapter = client->adapter;
-+ struct gsp_data *data;
-+ int err;
-+
-+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
-+ I2C_FUNC_SMBUS_WORD_DATA)) {
-+ err = -EOPNOTSUPP;
-+ goto exit;
-+ }
-+
-+ if (!(data = kzalloc(sizeof(struct gsp_data), GFP_KERNEL))) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+ i2c_set_clientdata(client, data);
-+
-+ data->type = id->driver_data;
-+
-+ switch (data->type) {
-+ case 0:
-+ data->attrs.attrs = gsp_attributes;
-+ break;
-+ }
-+
-+ dev_info(&client->dev, "%s chip found\n", client->name);
-+
-+ /* Register sysfs hooks */
-+ if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs)))
-+ goto exit_free;
-+
-+ data->hwmon_dev = hwmon_device_register(&client->dev);
-+ if (IS_ERR(data->hwmon_dev)) {
-+ err = PTR_ERR(data->hwmon_dev);
-+ goto exit_remove;
-+ }
-+
-+ return 0;
-+
-+exit_remove:
-+ sysfs_remove_group(&client->dev.kobj, &data->attrs);
-+exit_free:
-+ kfree(data);
-+exit:
-+ return err;
-+}
-+
-+static int gsp_remove(struct i2c_client *client)
-+{
-+ struct gsp_data *data = i2c_get_clientdata(client);
-+ hwmon_device_unregister(data->hwmon_dev);
-+ sysfs_remove_group(&client->dev.kobj, &data->attrs);
-+ kfree(data);
-+ return 0;
-+}
-+
-+static int __init gsp_init(void)
-+{
-+ return i2c_add_driver(&gsp_driver);
-+}
-+
-+static void __exit gsp_exit(void)
-+{
-+ i2c_del_driver(&gsp_driver);
-+}
-+
-+MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
-+MODULE_DESCRIPTION("GSP HWMON driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(gsp_init);
-+module_exit(gsp_exit);
---- a/drivers/hwmon/Kconfig
-+++ b/drivers/hwmon/Kconfig
-@@ -57,6 +57,15 @@ config SENSORS_ABITUGURU3
- This driver can also be built as a module. If so, the module
- will be called abituguru3.
-
-+config SENSORS_GSP
-+ tristate "Gateworks System Peripheral"
-+ depends on I2C && EXPERIMENTAL
-+ help
-+ If you say yes here you get support for the Gateworks System Peripherals.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called gsp.
-+
- config SENSORS_AD7414
- tristate "Analog Devices AD7414"
- depends on I2C && EXPERIMENTAL
---- a/drivers/hwmon/Makefile
-+++ b/drivers/hwmon/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_SENSORS_W83791D) += w83791d
-
- obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o
- obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
-+obj-$(CONFIG_SENSORS_GSP) += gsp.o
- obj-$(CONFIG_SENSORS_AD7414) += ad7414.o
- obj-$(CONFIG_SENSORS_AD7418) += ad7418.o
- obj-$(CONFIG_SENSORS_ADCXX) += adcxx.o
+++ /dev/null
---- /dev/null
-+++ b/drivers/ata/cns3xxx_ahci.c
-@@ -0,0 +1,3281 @@
-+/*
-+ * ahci.c - AHCI SATA support
-+ *
-+ * Maintained by: Jeff Garzik <jgarzik@pobox.com>
-+ * Please ALWAYS copy linux-ide@vger.kernel.org
-+ * on emails.
-+ *
-+ * Copyright 2004-2005 Red Hat, Inc.
-+ *
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; see the file COPYING. If not, write to
-+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ * libata documentation is available via 'make {ps|pdf}docs',
-+ * as Documentation/DocBook/libata.*
-+ *
-+ * AHCI hardware documentation:
-+ * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
-+ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
-+ *
-+ */
-+/*
-+ * Cavium CNS3XXX notice
-+ * This driver is copy from ahci, and this driver only modify memory access function.
-+ * Let the driver support non-PCI device
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/blkdev.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/device.h>
-+#include <linux/dmi.h>
-+#include <scsi/scsi_host.h>
-+#include <scsi/scsi_cmnd.h>
-+#include <linux/libata.h>
-+#include <linux/platform_device.h>
-+#include <mach/pm.h>
-+#include <mach/misc.h>
-+
-+#define DRV_NAME "cns3xxx_ahci"
-+#define DRV_VERSION "3.0"
-+
-+#define MISC_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT+offset)))
-+#define CNS3XXX_MISC_REGISTER MISC_REG_VALUE(0x514)
-+#define AHCI_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_SATA2_BASE_VIRT+offset)))
-+#define CNS3XXX_AHCI_HOSTCTL_REG AHCI_REG_VALUE(0x04)
-+
-+/* Enclosure Management Control */
-+#define EM_CTRL_MSG_TYPE 0x000f0000
-+
-+/* Enclosure Management LED Message Type */
-+#define EM_MSG_LED_HBA_PORT 0x0000000f
-+#define EM_MSG_LED_PMP_SLOT 0x0000ff00
-+#define EM_MSG_LED_VALUE 0xffff0000
-+#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000
-+#define EM_MSG_LED_VALUE_OFF 0xfff80000
-+#define EM_MSG_LED_VALUE_ON 0x00010000
-+
-+/* PHY Misc Define */
-+#define MISC_SATA_POWER_MODE MISC_MEM_MAP_VALUE(0x310)
-+#define MISC_SATA_CORE_ID MISC_MEM_MAP_VALUE(0x600)
-+#define MISC_SATA_PORT0_PHY_CFG MISC_MEM_MAP_VALUE(0x604)
-+#define MISC_SATA_PORT1_PHY_CFG MISC_MEM_MAP_VALUE(0x608)
-+#define MISC_SATA_PORT0_PHY_TST MISC_MEM_MAP_VALUE(0x60C)
-+#define MISC_SATA_PORT1_PHY_TST MISC_MEM_MAP_VALUE(0x610)
-+
-+
-+static int ahci_skip_host_reset;
-+static int ahci_ignore_sss;
-+
-+module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
-+MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
-+
-+module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
-+MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
-+
-+static int ahci_enable_alpm(struct ata_port *ap,
-+ enum link_pm policy);
-+static void ahci_disable_alpm(struct ata_port *ap);
-+static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
-+static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
-+ size_t size);
-+static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
-+ ssize_t size);
-+
-+enum {
-+ AHCI_PCI_BAR = 5,
-+ AHCI_MAX_PORTS = 32,
-+ AHCI_MAX_SG = 168, /* hardware max is 64K */
-+ AHCI_DMA_BOUNDARY = 0xffffffff,
-+ AHCI_MAX_CMDS = 32,
-+ AHCI_CMD_SZ = 32,
-+ AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
-+ AHCI_RX_FIS_SZ = 256,
-+ AHCI_CMD_TBL_CDB = 0x40,
-+ AHCI_CMD_TBL_HDR_SZ = 0x80,
-+ AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
-+ AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
-+ AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
-+ AHCI_RX_FIS_SZ,
-+ AHCI_IRQ_ON_SG = (1 << 31),
-+ AHCI_CMD_ATAPI = (1 << 5),
-+ AHCI_CMD_WRITE = (1 << 6),
-+ AHCI_CMD_PREFETCH = (1 << 7),
-+ AHCI_CMD_RESET = (1 << 8),
-+ AHCI_CMD_CLR_BUSY = (1 << 10),
-+
-+ RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
-+ RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
-+ RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
-+
-+ board_ahci = 0,
-+ board_ahci_vt8251 = 1,
-+ board_ahci_ign_iferr = 2,
-+ board_ahci_sb600 = 3,
-+ board_ahci_mv = 4,
-+ board_ahci_sb700 = 5, /* for SB700 and SB800 */
-+ board_ahci_mcp65 = 6,
-+ board_ahci_nopmp = 7,
-+ board_ahci_yesncq = 8,
-+
-+ /* global controller registers */
-+ HOST_CAP = 0x00, /* host capabilities */
-+ HOST_CTL = 0x04, /* global host control */
-+ HOST_IRQ_STAT = 0x08, /* interrupt status */
-+ HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
-+ HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
-+ HOST_EM_LOC = 0x1c, /* Enclosure Management location */
-+ HOST_EM_CTL = 0x20, /* Enclosure Management Control */
-+
-+ /* HOST_CTL bits */
-+ HOST_RESET = (1 << 0), /* reset controller; self-clear */
-+ HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
-+ HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
-+
-+ /* HOST_CAP bits */
-+ HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
-+ HOST_CAP_SSC = (1 << 14), /* Slumber capable */
-+ HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
-+ HOST_CAP_CLO = (1 << 24), /* Command List Override support */
-+ HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
-+ HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
-+ HOST_CAP_SNTF = (1 << 29), /* SNotification register */
-+ HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
-+ HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
-+
-+ /* registers for each SATA port */
-+ PORT_LST_ADDR = 0x00, /* command list DMA addr */
-+ PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
-+ PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
-+ PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
-+ PORT_IRQ_STAT = 0x10, /* interrupt status */
-+ PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
-+ PORT_CMD = 0x18, /* port command */
-+ PORT_TFDATA = 0x20, /* taskfile data */
-+ PORT_SIG = 0x24, /* device TF signature */
-+ PORT_CMD_ISSUE = 0x38, /* command issue */
-+ PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
-+ PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
-+ PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
-+ PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
-+ PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
-+
-+ /* PORT_IRQ_{STAT,MASK} bits */
-+ PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
-+ PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
-+ PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
-+ PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
-+ PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
-+ PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
-+ PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
-+ PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
-+
-+ PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
-+ PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
-+ PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
-+ PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
-+ PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
-+ PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
-+ PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
-+ PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
-+ PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
-+
-+ PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
-+ PORT_IRQ_IF_ERR |
-+ PORT_IRQ_CONNECT |
-+ PORT_IRQ_PHYRDY |
-+ PORT_IRQ_UNK_FIS |
-+ PORT_IRQ_BAD_PMP,
-+ PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
-+ PORT_IRQ_TF_ERR |
-+ PORT_IRQ_HBUS_DATA_ERR,
-+ DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
-+ PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
-+ PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
-+
-+ /* PORT_CMD bits */
-+ PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
-+ PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
-+ PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
-+ PORT_CMD_PMP = (1 << 17), /* PMP attached */
-+ PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
-+ PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
-+ PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
-+ PORT_CMD_CLO = (1 << 3), /* Command list override */
-+ PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
-+ PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
-+ PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
-+
-+ PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
-+ PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
-+ PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
-+ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
-+
-+ /* hpriv->flags bits */
-+ AHCI_HFLAG_NO_NCQ = (1 << 0),
-+ AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
-+ AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
-+ AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
-+ AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
-+ AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
-+ AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
-+ AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
-+ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
-+ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
-+ AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
-+ AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
-+ link offline */
-+
-+ /* ap->flags bits */
-+
-+ AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-+ ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
-+ ATA_FLAG_IPM,
-+
-+ ICH_MAP = 0x90, /* ICH MAP register */
-+
-+ /* em constants */
-+ EM_MAX_SLOTS = 8,
-+ EM_MAX_RETRY = 5,
-+
-+ /* em_ctl bits */
-+ EM_CTL_RST = (1 << 9), /* Reset */
-+ EM_CTL_TM = (1 << 8), /* Transmit Message */
-+ EM_CTL_ALHD = (1 << 26), /* Activity LED */
-+
-+ /* CNS3XXX define */
-+ HOST_TIMER1MS = 0xe0, /* Timer 1ms register */
-+};
-+
-+struct ahci_cmd_hdr {
-+ __le32 opts;
-+ __le32 status;
-+ __le32 tbl_addr;
-+ __le32 tbl_addr_hi;
-+ __le32 reserved[4];
-+};
-+
-+struct ahci_sg {
-+ __le32 addr;
-+ __le32 addr_hi;
-+ __le32 reserved;
-+ __le32 flags_size;
-+};
-+
-+struct ahci_em_priv {
-+ enum sw_activity blink_policy;
-+ struct timer_list timer;
-+ unsigned long saved_activity;
-+ unsigned long activity;
-+ unsigned long led_state;
-+};
-+
-+struct ahci_host_priv {
-+ unsigned int flags; /* AHCI_HFLAG_* */
-+ u32 cap; /* cap to use */
-+ u32 port_map; /* port map to use */
-+ u32 saved_cap; /* saved initial cap */
-+ u32 saved_port_map; /* saved initial port_map */
-+ u32 em_loc; /* enclosure management location */
-+};
-+
-+struct ahci_port_priv {
-+ struct ata_link *active_link;
-+ struct ahci_cmd_hdr *cmd_slot;
-+ dma_addr_t cmd_slot_dma;
-+ void *cmd_tbl;
-+ dma_addr_t cmd_tbl_dma;
-+ void *rx_fis;
-+ dma_addr_t rx_fis_dma;
-+ /* for NCQ spurious interrupt analysis */
-+ unsigned int ncq_saw_d2h:1;
-+ unsigned int ncq_saw_dmas:1;
-+ unsigned int ncq_saw_sdb:1;
-+ u32 intr_mask; /* interrupts to enable */
-+ /* enclosure management info per PM slot */
-+ struct ahci_em_priv em_priv[EM_MAX_SLOTS];
-+};
-+
-+static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
-+static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
-+#if 0
-+static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-+#else
-+static int ahci_probe(struct platform_device *pdev);
-+static int ahci_remove(struct platform_device *pdev);
-+#endif
-+static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
-+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
-+static int ahci_port_start(struct ata_port *ap);
-+static void ahci_port_stop(struct ata_port *ap);
-+static void ahci_qc_prep(struct ata_queued_cmd *qc);
-+static void ahci_freeze(struct ata_port *ap);
-+static void ahci_thaw(struct ata_port *ap);
-+static void ahci_pmp_attach(struct ata_port *ap);
-+static void ahci_pmp_detach(struct ata_port *ap);
-+static int ahci_softreset(struct ata_link *link, unsigned int *class,
-+ unsigned long deadline);
-+static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
-+ unsigned long deadline);
-+static int ahci_hardreset(struct ata_link *link, unsigned int *class,
-+ unsigned long deadline);
-+static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
-+ unsigned long deadline);
-+#if 0
-+static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
-+ unsigned long deadline);
-+#endif
-+static void ahci_postreset(struct ata_link *link, unsigned int *class);
-+static void ahci_error_handler(struct ata_port *ap);
-+static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
-+static int ahci_port_resume(struct ata_port *ap);
-+static void ahci_dev_config(struct ata_device *dev);
-+static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
-+ u32 opts);
-+#ifdef CONFIG_PM
-+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
-+static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
-+static int ahci_pci_device_resume(struct pci_dev *pdev);
-+#endif
-+static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
-+static ssize_t ahci_activity_store(struct ata_device *dev,
-+ enum sw_activity val);
-+static void ahci_init_sw_activity(struct ata_link *link);
-+
-+static struct device_attribute *ahci_shost_attrs[] = {
-+ &dev_attr_link_power_management_policy,
-+ &dev_attr_em_message_type,
-+ &dev_attr_em_message,
-+ NULL
-+};
-+
-+static struct device_attribute *ahci_sdev_attrs[] = {
-+ &dev_attr_sw_activity,
-+ &dev_attr_unload_heads,
-+ NULL
-+};
-+
-+static struct scsi_host_template ahci_sht = {
-+ ATA_NCQ_SHT(DRV_NAME),
-+ .can_queue = AHCI_MAX_CMDS - 1,
-+ .sg_tablesize = AHCI_MAX_SG,
-+ .dma_boundary = AHCI_DMA_BOUNDARY,
-+ .shost_attrs = ahci_shost_attrs,
-+ .sdev_attrs = ahci_sdev_attrs,
-+};
-+
-+static struct ata_port_operations ahci_ops = {
-+ .inherits = &sata_pmp_port_ops,
-+
-+ .qc_defer = sata_pmp_qc_defer_cmd_switch,
-+ .qc_prep = ahci_qc_prep,
-+ .qc_issue = ahci_qc_issue,
-+ .qc_fill_rtf = ahci_qc_fill_rtf,
-+
-+ .freeze = ahci_freeze,
-+ .thaw = ahci_thaw,
-+ .softreset = ahci_softreset,
-+ .hardreset = ahci_hardreset,
-+ .postreset = ahci_postreset,
-+ .pmp_softreset = ahci_softreset,
-+ .error_handler = ahci_error_handler,
-+ .post_internal_cmd = ahci_post_internal_cmd,
-+ .dev_config = ahci_dev_config,
-+
-+ .scr_read = ahci_scr_read,
-+ .scr_write = ahci_scr_write,
-+ .pmp_attach = ahci_pmp_attach,
-+ .pmp_detach = ahci_pmp_detach,
-+
-+ .enable_pm = ahci_enable_alpm,
-+ .disable_pm = ahci_disable_alpm,
-+ .em_show = ahci_led_show,
-+ .em_store = ahci_led_store,
-+ .sw_activity_show = ahci_activity_show,
-+ .sw_activity_store = ahci_activity_store,
-+#ifdef CONFIG_PM
-+ .port_suspend = ahci_port_suspend,
-+ .port_resume = ahci_port_resume,
-+#endif
-+ .port_start = ahci_port_start,
-+ .port_stop = ahci_port_stop,
-+};
-+
-+static struct ata_port_operations ahci_vt8251_ops = {
-+ .inherits = &ahci_ops,
-+ .hardreset = ahci_vt8251_hardreset,
-+};
-+
-+#if 0
-+static struct ata_port_operations ahci_p5wdh_ops = {
-+ .inherits = &ahci_ops,
-+ .hardreset = ahci_p5wdh_hardreset,
-+};
-+#endif
-+
-+static struct ata_port_operations ahci_sb600_ops = {
-+ .inherits = &ahci_ops,
-+ .softreset = ahci_sb600_softreset,
-+ .pmp_softreset = ahci_sb600_softreset,
-+};
-+
-+#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
-+
-+static const struct ata_port_info ahci_port_info[] = {
-+ [board_ahci] =
-+ {
-+ .flags = AHCI_FLAG_COMMON,
-+ .pio_mask = ATA_PIO4,
-+ .udma_mask = ATA_UDMA6,
-+ .port_ops = &ahci_ops,
-+ },
-+ [board_ahci_vt8251] =
-+ {
-+ AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
-+ .flags = AHCI_FLAG_COMMON,
-+ .pio_mask = ATA_PIO4,
-+ .udma_mask = ATA_UDMA6,
-+ .port_ops = &ahci_vt8251_ops,
-+ },
-+ [board_ahci_ign_iferr] =
-+ {
-+ AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
-+ .flags = AHCI_FLAG_COMMON,
-+ .pio_mask = ATA_PIO4,
-+ .udma_mask = ATA_UDMA6,
-+ .port_ops = &ahci_ops,
-+ },
-+ [board_ahci_sb600] =
-+ {
-+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
-+ AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255),
-+ .flags = AHCI_FLAG_COMMON,
-+ .pio_mask = ATA_PIO4,
-+ .udma_mask = ATA_UDMA6,
-+ .port_ops = &ahci_sb600_ops,
-+ },
-+ [board_ahci_mv] =
-+ {
-+ AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
-+ AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
-+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
-+ .pio_mask = ATA_PIO4,
-+ .udma_mask = ATA_UDMA6,
-+ .port_ops = &ahci_ops,
-+ },
-+ [board_ahci_sb700] = /* for SB700 and SB800 */
-+ {
-+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL),
-+ .flags = AHCI_FLAG_COMMON,
-+ .pio_mask = ATA_PIO4,
-+ .udma_mask = ATA_UDMA6,
-+ .port_ops = &ahci_sb600_ops,
-+ },
-+ [board_ahci_mcp65] =
-+ {
-+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
-+ .flags = AHCI_FLAG_COMMON,
-+ .pio_mask = ATA_PIO4,
-+ .udma_mask = ATA_UDMA6,
-+ .port_ops = &ahci_ops,
-+ },
-+ [board_ahci_nopmp] =
-+ {
-+ AHCI_HFLAGS (AHCI_HFLAG_NO_PMP),
-+ .flags = AHCI_FLAG_COMMON,
-+ .pio_mask = ATA_PIO4,
-+ .udma_mask = ATA_UDMA6,
-+ .port_ops = &ahci_ops,
-+ },
-+ /* board_ahci_yesncq */
-+ {
-+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
-+ .flags = AHCI_FLAG_COMMON,
-+ .pio_mask = ATA_PIO4,
-+ .udma_mask = ATA_UDMA6,
-+ .port_ops = &ahci_ops,
-+ },
-+};
-+
-+static const struct pci_device_id ahci_pci_tbl[] = {
-+ /* Intel */
-+ { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
-+ { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
-+ { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
-+ { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
-+ { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
-+ { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
-+ { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
-+ { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
-+ { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
-+ { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
-+ { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
-+ { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */
-+ { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
-+ { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
-+ { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
-+ { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
-+ { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
-+ { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
-+ { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
-+ { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
-+ { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
-+ { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
-+ { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
-+ { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
-+ { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
-+ { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
-+ { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
-+ { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
-+ { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
-+ { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
-+ { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
-+ { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
-+ { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
-+ { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
-+ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
-+ { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
-+ { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
-+ { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
-+ { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
-+ { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
-+
-+ /* JMicron 360/1/3/5/6, match class to avoid IDE function */
-+ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-+ PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
-+
-+ /* ATI */
-+ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
-+ { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */
-+ { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */
-+ { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */
-+ { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */
-+ { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
-+ { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
-+
-+ /* VIA */
-+ { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
-+ { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
-+
-+ /* NVIDIA */
-+ { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */
-+ { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */
-+ { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */
-+ { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */
-+ { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */
-+ { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
-+ { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
-+ { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
-+ { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci_yesncq }, /* MCP67 */
-+ { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci_yesncq }, /* MCP67 */
-+ { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci_yesncq }, /* MCP67 */
-+ { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci_yesncq }, /* MCP67 */
-+ { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci_yesncq }, /* MCP67 */
-+ { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci_yesncq }, /* MCP67 */
-+ { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci_yesncq }, /* MCP67 */
-+ { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci_yesncq }, /* MCP67 */
-+ { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci_yesncq }, /* MCP67 */
-+ { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */
-+ { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */
-+ { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */
-+ { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */
-+ { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */
-+ { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */
-+ { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci_yesncq }, /* MCP73 */
-+ { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci_yesncq }, /* MCP73 */
-+ { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci_yesncq }, /* MCP73 */
-+ { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci_yesncq }, /* MCP73 */
-+ { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci_yesncq }, /* MCP73 */
-+ { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci_yesncq }, /* MCP73 */
-+ { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci_yesncq }, /* MCP73 */
-+ { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci_yesncq }, /* MCP73 */
-+ { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci_yesncq }, /* MCP73 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
-+ { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */
-+ { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */
-+ { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */
-+ { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */
-+ { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */
-+ { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
-+ { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
-+ { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
-+ { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci }, /* MCP89 */
-+ { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci }, /* MCP89 */
-+ { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci }, /* MCP89 */
-+ { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci }, /* MCP89 */
-+ { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci }, /* MCP89 */
-+ { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci }, /* MCP89 */
-+ { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci }, /* MCP89 */
-+ { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci }, /* MCP89 */
-+ { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci }, /* MCP89 */
-+ { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci }, /* MCP89 */
-+ { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci }, /* MCP89 */
-+ { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci }, /* MCP89 */
-+
-+ /* SiS */
-+ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
-+ { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 968 */
-+ { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
-+
-+ /* Marvell */
-+ { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
-+ { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */
-+
-+ /* Promise */
-+ { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
-+
-+ /* Generic, PCI class code for AHCI */
-+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-+ PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
-+
-+ { } /* terminate list */
-+};
-+
-+
-+#if 0
-+static struct pci_driver ahci_pci_driver = {
-+ .name = DRV_NAME,
-+ .id_table = ahci_pci_tbl,
-+ .probe = ahci_init_one,
-+ .remove = ata_pci_remove_one,
-+#ifdef CONFIG_PM
-+ .suspend = ahci_pci_device_suspend,
-+ .resume = ahci_pci_device_resume,
-+#endif
-+};
-+#else
-+static struct platform_driver ahci_driver = {
-+ .probe = ahci_probe,
-+ .remove = __devexit_p(ahci_remove),
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+#endif
-+
-+static int ahci_em_messages = 1;
-+module_param(ahci_em_messages, int, 0444);
-+/* add other LED protocol types when they become supported */
-+MODULE_PARM_DESC(ahci_em_messages,
-+ "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
-+
-+#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
-+static int marvell_enable;
-+#else
-+static int marvell_enable = 1;
-+#endif
-+module_param(marvell_enable, int, 0644);
-+MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
-+
-+
-+static inline int ahci_nr_ports(u32 cap)
-+{
-+ return (cap & 0x1f) + 1;
-+}
-+
-+static inline void __iomem *__ahci_port_base(struct ata_host *host,
-+ unsigned int port_no)
-+{
-+#if 0
-+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
-+#else
-+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
-+#endif
-+
-+ return mmio + 0x100 + (port_no * 0x80);
-+}
-+
-+static inline void __iomem *ahci_port_base(struct ata_port *ap)
-+{
-+ return __ahci_port_base(ap->host, ap->port_no);
-+}
-+
-+static void ahci_enable_ahci(void __iomem *mmio)
-+{
-+ int i;
-+ u32 tmp;
-+
-+ /* turn on AHCI_EN */
-+ tmp = readl(mmio + HOST_CTL);
-+ if (tmp & HOST_AHCI_EN)
-+ return;
-+
-+ /* Some controllers need AHCI_EN to be written multiple times.
-+ * Try a few times before giving up.
-+ */
-+ for (i = 0; i < 5; i++) {
-+ tmp |= HOST_AHCI_EN;
-+ writel(tmp, mmio + HOST_CTL);
-+ tmp = readl(mmio + HOST_CTL); /* flush && sanity check */
-+ if (tmp & HOST_AHCI_EN)
-+ return;
-+ msleep(10);
-+ }
-+
-+ WARN_ON(1);
-+}
-+
-+/**
-+ * ahci_save_initial_config - Save and fixup initial config values
-+ * @pdev: target PCI device
-+ * @hpriv: host private area to store config values
-+ *
-+ * Some registers containing configuration info might be setup by
-+ * BIOS and might be cleared on reset. This function saves the
-+ * initial values of those registers into @hpriv such that they
-+ * can be restored after controller reset.
-+ *
-+ * If inconsistent, config values are fixed up by this function.
-+ *
-+ * LOCKING:
-+ * None.
-+ */
-+#if 0
-+static void ahci_save_initial_config(struct pci_dev *pdev,
-+ struct ahci_host_priv *hpriv)
-+#else
-+static void ahci_save_initial_config(struct platform_device *pdev,
-+ struct ahci_host_priv *hpriv,
-+ u8 * base)
-+#endif
-+{
-+#if 0
-+ void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
-+#else
-+ void __iomem *mmio = (void __iomem *)base;
-+#endif
-+ u32 cap, port_map;
-+ int i;
-+#if 0
-+ int mv;
-+#endif
-+
-+ /* make sure AHCI mode is enabled before accessing CAP */
-+ ahci_enable_ahci(mmio);
-+
-+ /* Values prefixed with saved_ are written back to host after
-+ * reset. Values without are used for driver operation.
-+ */
-+ hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
-+ hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
-+
-+ /* some chips have errata preventing 64bit use */
-+ if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
-+ dev_printk(KERN_INFO, &pdev->dev,
-+ "controller can't do 64bit DMA, forcing 32bit\n");
-+ cap &= ~HOST_CAP_64;
-+ }
-+
-+ if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
-+ dev_printk(KERN_INFO, &pdev->dev,
-+ "controller can't do NCQ, turning off CAP_NCQ\n");
-+ cap &= ~HOST_CAP_NCQ;
-+ }
-+
-+ if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
-+ dev_printk(KERN_INFO, &pdev->dev,
-+ "controller can do NCQ, turning on CAP_NCQ\n");
-+ cap |= HOST_CAP_NCQ;
-+ }
-+
-+ if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
-+ dev_printk(KERN_INFO, &pdev->dev,
-+ "controller can't do PMP, turning off CAP_PMP\n");
-+ cap &= ~HOST_CAP_PMP;
-+ }
-+#if 0
-+ if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
-+ port_map != 1) {
-+ dev_printk(KERN_INFO, &pdev->dev,
-+ "JMB361 has only one port, port_map 0x%x -> 0x%x\n",
-+ port_map, 1);
-+ port_map = 1;
-+ }
-+
-+ /*
-+ * Temporary Marvell 6145 hack: PATA port presence
-+ * is asserted through the standard AHCI port
-+ * presence register, as bit 4 (counting from 0)
-+ */
-+ if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
-+ if (pdev->device == 0x6121)
-+ mv = 0x3;
-+ else
-+ mv = 0xf;
-+ dev_printk(KERN_ERR, &pdev->dev,
-+ "MV_AHCI HACK: port_map %x -> %x\n",
-+ port_map,
-+ port_map & mv);
-+ dev_printk(KERN_ERR, &pdev->dev,
-+ "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
-+
-+ port_map &= mv;
-+ }
-+#endif
-+
-+ /* cross check port_map and cap.n_ports */
-+ if (port_map) {
-+ int map_ports = 0;
-+
-+ for (i = 0; i < AHCI_MAX_PORTS; i++)
-+ if (port_map & (1 << i))
-+ map_ports++;
-+
-+ /* If PI has more ports than n_ports, whine, clear
-+ * port_map and let it be generated from n_ports.
-+ */
-+ if (map_ports > ahci_nr_ports(cap)) {
-+ dev_printk(KERN_WARNING, &pdev->dev,
-+ "implemented port map (0x%x) contains more "
-+ "ports than nr_ports (%u), using nr_ports\n",
-+ port_map, ahci_nr_ports(cap));
-+ port_map = 0;
-+ }
-+ }
-+
-+ /* fabricate port_map from cap.nr_ports */
-+ if (!port_map) {
-+ port_map = (1 << ahci_nr_ports(cap)) - 1;
-+ dev_printk(KERN_WARNING, &pdev->dev,
-+ "forcing PORTS_IMPL to 0x%x\n", port_map);
-+
-+ /* write the fixed up value to the PI register */
-+ hpriv->saved_port_map = port_map;
-+ }
-+
-+ /* record values to use during operation */
-+ hpriv->cap = cap;
-+ hpriv->port_map = port_map;
-+}
-+
-+/**
-+ * ahci_restore_initial_config - Restore initial config
-+ * @host: target ATA host
-+ *
-+ * Restore initial config stored by ahci_save_initial_config().
-+ *
-+ * LOCKING:
-+ * None.
-+ */
-+static void ahci_restore_initial_config(struct ata_host *host)
-+{
-+ struct ahci_host_priv *hpriv = host->private_data;
-+#if 0
-+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
-+#else
-+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
-+#endif
-+
-+ writel(hpriv->saved_cap, mmio + HOST_CAP);
-+ writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
-+ (void) readl(mmio + HOST_PORTS_IMPL); /* flush */
-+}
-+
-+static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
-+{
-+ static const int offset[] = {
-+ [SCR_STATUS] = PORT_SCR_STAT,
-+ [SCR_CONTROL] = PORT_SCR_CTL,
-+ [SCR_ERROR] = PORT_SCR_ERR,
-+ [SCR_ACTIVE] = PORT_SCR_ACT,
-+ [SCR_NOTIFICATION] = PORT_SCR_NTF,
-+ };
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
-+
-+ if (sc_reg < ARRAY_SIZE(offset) &&
-+ (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
-+ return offset[sc_reg];
-+ return 0;
-+}
-+
-+static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
-+{
-+ void __iomem *port_mmio = ahci_port_base(link->ap);
-+ int offset = ahci_scr_offset(link->ap, sc_reg);
-+
-+ if (offset) {
-+ *val = readl(port_mmio + offset);
-+ return 0;
-+ }
-+ return -EINVAL;
-+}
-+
-+static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
-+{
-+ void __iomem *port_mmio = ahci_port_base(link->ap);
-+ int offset = ahci_scr_offset(link->ap, sc_reg);
-+
-+ if (offset) {
-+ writel(val, port_mmio + offset);
-+ return 0;
-+ }
-+ return -EINVAL;
-+}
-+
-+static void ahci_start_engine(struct ata_port *ap)
-+{
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ u32 tmp;
-+
-+ /* start DMA */
-+ tmp = readl(port_mmio + PORT_CMD);
-+ tmp |= PORT_CMD_START;
-+ writel(tmp, port_mmio + PORT_CMD);
-+ readl(port_mmio + PORT_CMD); /* flush */
-+}
-+
-+static int ahci_stop_engine(struct ata_port *ap)
-+{
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ u32 tmp;
-+
-+ tmp = readl(port_mmio + PORT_CMD);
-+
-+ /* check if the HBA is idle */
-+ if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
-+ return 0;
-+
-+ /* setting HBA to idle */
-+ tmp &= ~PORT_CMD_START;
-+ writel(tmp, port_mmio + PORT_CMD);
-+
-+ /* wait for engine to stop. This could be as long as 500 msec */
-+ tmp = ata_wait_register(port_mmio + PORT_CMD,
-+ PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
-+ if (tmp & PORT_CMD_LIST_ON)
-+ return -EIO;
-+
-+ return 0;
-+}
-+
-+static void ahci_start_fis_rx(struct ata_port *ap)
-+{
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
-+ struct ahci_port_priv *pp = ap->private_data;
-+ u32 tmp;
-+
-+ /* set FIS registers */
-+ if (hpriv->cap & HOST_CAP_64)
-+ writel((pp->cmd_slot_dma >> 16) >> 16,
-+ port_mmio + PORT_LST_ADDR_HI);
-+ writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
-+
-+ if (hpriv->cap & HOST_CAP_64)
-+ writel((pp->rx_fis_dma >> 16) >> 16,
-+ port_mmio + PORT_FIS_ADDR_HI);
-+ writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
-+
-+ /* enable FIS reception */
-+ tmp = readl(port_mmio + PORT_CMD);
-+ tmp |= PORT_CMD_FIS_RX;
-+ writel(tmp, port_mmio + PORT_CMD);
-+
-+ /* flush */
-+ readl(port_mmio + PORT_CMD);
-+}
-+
-+static int ahci_stop_fis_rx(struct ata_port *ap)
-+{
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ u32 tmp;
-+
-+ /* disable FIS reception */
-+ tmp = readl(port_mmio + PORT_CMD);
-+ tmp &= ~PORT_CMD_FIS_RX;
-+ writel(tmp, port_mmio + PORT_CMD);
-+
-+ /* wait for completion, spec says 500ms, give it 1000 */
-+ tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
-+ PORT_CMD_FIS_ON, 10, 1000);
-+ if (tmp & PORT_CMD_FIS_ON)
-+ return -EBUSY;
-+
-+ return 0;
-+}
-+
-+static void ahci_power_up(struct ata_port *ap)
-+{
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ u32 cmd;
-+
-+ cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
-+
-+ /* spin up device */
-+ if (hpriv->cap & HOST_CAP_SSS) {
-+ cmd |= PORT_CMD_SPIN_UP;
-+ writel(cmd, port_mmio + PORT_CMD);
-+ }
-+
-+ /* wake up link */
-+ writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
-+}
-+
-+static void ahci_disable_alpm(struct ata_port *ap)
-+{
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ u32 cmd;
-+ struct ahci_port_priv *pp = ap->private_data;
-+
-+ /* IPM bits should be disabled by libata-core */
-+ /* get the existing command bits */
-+ cmd = readl(port_mmio + PORT_CMD);
-+
-+ /* disable ALPM and ASP */
-+ cmd &= ~PORT_CMD_ASP;
-+ cmd &= ~PORT_CMD_ALPE;
-+
-+ /* force the interface back to active */
-+ cmd |= PORT_CMD_ICC_ACTIVE;
-+
-+ /* write out new cmd value */
-+ writel(cmd, port_mmio + PORT_CMD);
-+ cmd = readl(port_mmio + PORT_CMD);
-+
-+ /* wait 10ms to be sure we've come out of any low power state */
-+ msleep(10);
-+
-+ /* clear out any PhyRdy stuff from interrupt status */
-+ writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
-+
-+ /* go ahead and clean out PhyRdy Change from Serror too */
-+ ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
-+
-+ /*
-+ * Clear flag to indicate that we should ignore all PhyRdy
-+ * state changes
-+ */
-+ hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
-+
-+ /*
-+ * Enable interrupts on Phy Ready.
-+ */
-+ pp->intr_mask |= PORT_IRQ_PHYRDY;
-+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-+
-+ /*
-+ * don't change the link pm policy - we can be called
-+ * just to turn of link pm temporarily
-+ */
-+}
-+
-+static int ahci_enable_alpm(struct ata_port *ap,
-+ enum link_pm policy)
-+{
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ u32 cmd;
-+ struct ahci_port_priv *pp = ap->private_data;
-+ u32 asp;
-+
-+ /* Make sure the host is capable of link power management */
-+ if (!(hpriv->cap & HOST_CAP_ALPM))
-+ return -EINVAL;
-+
-+ switch (policy) {
-+ case MAX_PERFORMANCE:
-+ case NOT_AVAILABLE:
-+ /*
-+ * if we came here with NOT_AVAILABLE,
-+ * it just means this is the first time we
-+ * have tried to enable - default to max performance,
-+ * and let the user go to lower power modes on request.
-+ */
-+ ahci_disable_alpm(ap);
-+ return 0;
-+ case MIN_POWER:
-+ /* configure HBA to enter SLUMBER */
-+ asp = PORT_CMD_ASP;
-+ break;
-+ case MEDIUM_POWER:
-+ /* configure HBA to enter PARTIAL */
-+ asp = 0;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Disable interrupts on Phy Ready. This keeps us from
-+ * getting woken up due to spurious phy ready interrupts
-+ * TBD - Hot plug should be done via polling now, is
-+ * that even supported?
-+ */
-+ pp->intr_mask &= ~PORT_IRQ_PHYRDY;
-+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-+
-+ /*
-+ * Set a flag to indicate that we should ignore all PhyRdy
-+ * state changes since these can happen now whenever we
-+ * change link state
-+ */
-+ hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
-+
-+ /* get the existing command bits */
-+ cmd = readl(port_mmio + PORT_CMD);
-+
-+ /*
-+ * Set ASP based on Policy
-+ */
-+ cmd |= asp;
-+
-+ /*
-+ * Setting this bit will instruct the HBA to aggressively
-+ * enter a lower power link state when it's appropriate and
-+ * based on the value set above for ASP
-+ */
-+ cmd |= PORT_CMD_ALPE;
-+
-+ /* write out new cmd value */
-+ writel(cmd, port_mmio + PORT_CMD);
-+ cmd = readl(port_mmio + PORT_CMD);
-+
-+ /* IPM bits should be set by libata-core */
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static void ahci_power_down(struct ata_port *ap)
-+{
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ u32 cmd, scontrol;
-+
-+ if (!(hpriv->cap & HOST_CAP_SSS))
-+ return;
-+
-+ /* put device into listen mode, first set PxSCTL.DET to 0 */
-+ scontrol = readl(port_mmio + PORT_SCR_CTL);
-+ scontrol &= ~0xf;
-+ writel(scontrol, port_mmio + PORT_SCR_CTL);
-+
-+ /* then set PxCMD.SUD to 0 */
-+ cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
-+ cmd &= ~PORT_CMD_SPIN_UP;
-+ writel(cmd, port_mmio + PORT_CMD);
-+}
-+#endif
-+
-+static void ahci_start_port(struct ata_port *ap)
-+{
-+ struct ahci_port_priv *pp = ap->private_data;
-+ struct ata_link *link;
-+ struct ahci_em_priv *emp;
-+ ssize_t rc;
-+ int i;
-+
-+ /* enable FIS reception */
-+ ahci_start_fis_rx(ap);
-+
-+ /* enable DMA */
-+ ahci_start_engine(ap);
-+
-+ /* turn on LEDs */
-+ if (ap->flags & ATA_FLAG_EM) {
-+ ata_for_each_link(link, ap, EDGE) {
-+ emp = &pp->em_priv[link->pmp];
-+
-+ /* EM Transmit bit maybe busy during init */
-+ for (i = 0; i < EM_MAX_RETRY; i++) {
-+ rc = ahci_transmit_led_message(ap,
-+ emp->led_state,
-+ 4);
-+ if (rc == -EBUSY)
-+ msleep(1);
-+ else
-+ break;
-+ }
-+ }
-+ }
-+
-+ if (ap->flags & ATA_FLAG_SW_ACTIVITY)
-+ ata_for_each_link(link, ap, EDGE)
-+ ahci_init_sw_activity(link);
-+
-+}
-+
-+static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
-+{
-+ int rc;
-+
-+ /* disable DMA */
-+ rc = ahci_stop_engine(ap);
-+ if (rc) {
-+ *emsg = "failed to stop engine";
-+ return rc;
-+ }
-+
-+ /* disable FIS reception */
-+ rc = ahci_stop_fis_rx(ap);
-+ if (rc) {
-+ *emsg = "failed stop FIS RX";
-+ return rc;
-+ }
-+
-+ return 0;
-+}
-+
-+static int ahci_reset_controller(struct ata_host *host)
-+{
-+#if 0
-+ struct pci_dev *pdev = to_pci_dev(host->dev);
-+ struct ahci_host_priv *hpriv = host->private_data;
-+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
-+#else
-+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
-+#endif
-+ u32 tmp;
-+
-+ /* we must be in AHCI mode, before using anything
-+ * AHCI-specific, such as HOST_RESET.
-+ */
-+ ahci_enable_ahci(mmio);
-+
-+ /* global controller reset */
-+ if (!ahci_skip_host_reset) {
-+ tmp = readl(mmio + HOST_CTL);
-+ if ((tmp & HOST_RESET) == 0) {
-+ writel(tmp | HOST_RESET, mmio + HOST_CTL);
-+ readl(mmio + HOST_CTL); /* flush */
-+ }
-+
-+ /*
-+ * to perform host reset, OS should set HOST_RESET
-+ * and poll until this bit is read to be "0".
-+ * reset must complete within 1 second, or
-+ * the hardware should be considered fried.
-+ */
-+ tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET,
-+ HOST_RESET, 10, 1000);
-+
-+ if (tmp & HOST_RESET) {
-+ dev_printk(KERN_ERR, host->dev,
-+ "controller reset failed (0x%x)\n", tmp);
-+ return -EIO;
-+ }
-+
-+ /* turn on AHCI mode */
-+ ahci_enable_ahci(mmio);
-+
-+ /* Some registers might be cleared on reset. Restore
-+ * initial values.
-+ */
-+ ahci_restore_initial_config(host);
-+ } else
-+ dev_printk(KERN_INFO, host->dev,
-+ "skipping global host reset\n");
-+
-+#if 0
-+ if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
-+ u16 tmp16;
-+
-+ /* configure PCS */
-+ pci_read_config_word(pdev, 0x92, &tmp16);
-+ if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
-+ tmp16 |= hpriv->port_map;
-+ pci_write_config_word(pdev, 0x92, tmp16);
-+ }
-+ }
-+#endif
-+
-+ return 0;
-+}
-+
-+static void ahci_sw_activity(struct ata_link *link)
-+{
-+ struct ata_port *ap = link->ap;
-+ struct ahci_port_priv *pp = ap->private_data;
-+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
-+
-+ if (!(link->flags & ATA_LFLAG_SW_ACTIVITY))
-+ return;
-+
-+ emp->activity++;
-+ if (!timer_pending(&emp->timer))
-+ mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10));
-+}
-+
-+static void ahci_sw_activity_blink(unsigned long arg)
-+{
-+ struct ata_link *link = (struct ata_link *)arg;
-+ struct ata_port *ap = link->ap;
-+ struct ahci_port_priv *pp = ap->private_data;
-+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
-+ unsigned long led_message = emp->led_state;
-+ u32 activity_led_state;
-+ unsigned long flags;
-+
-+ led_message &= EM_MSG_LED_VALUE;
-+ led_message |= ap->port_no | (link->pmp << 8);
-+
-+ /* check to see if we've had activity. If so,
-+ * toggle state of LED and reset timer. If not,
-+ * turn LED to desired idle state.
-+ */
-+ spin_lock_irqsave(ap->lock, flags);
-+ if (emp->saved_activity != emp->activity) {
-+ emp->saved_activity = emp->activity;
-+ /* get the current LED state */
-+ activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
-+
-+ if (activity_led_state)
-+ activity_led_state = 0;
-+ else
-+ activity_led_state = 1;
-+
-+ /* clear old state */
-+ led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
-+
-+ /* toggle state */
-+ led_message |= (activity_led_state << 16);
-+ mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
-+ } else {
-+ /* switch to idle */
-+ led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
-+ if (emp->blink_policy == BLINK_OFF)
-+ led_message |= (1 << 16);
-+ }
-+ spin_unlock_irqrestore(ap->lock, flags);
-+ ahci_transmit_led_message(ap, led_message, 4);
-+}
-+
-+static void ahci_init_sw_activity(struct ata_link *link)
-+{
-+ struct ata_port *ap = link->ap;
-+ struct ahci_port_priv *pp = ap->private_data;
-+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
-+
-+ /* init activity stats, setup timer */
-+ emp->saved_activity = emp->activity = 0;
-+ setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link);
-+
-+ /* check our blink policy and set flag for link if it's enabled */
-+ if (emp->blink_policy)
-+ link->flags |= ATA_LFLAG_SW_ACTIVITY;
-+}
-+
-+static int ahci_reset_em(struct ata_host *host)
-+{
-+#if 0
-+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
-+#else
-+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
-+#endif
-+ u32 em_ctl;
-+
-+ em_ctl = readl(mmio + HOST_EM_CTL);
-+ if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST))
-+ return -EINVAL;
-+
-+ writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
-+ return 0;
-+}
-+
-+static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
-+ ssize_t size)
-+{
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
-+ struct ahci_port_priv *pp = ap->private_data;
-+#if 0
-+ void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-+#else
-+ void __iomem *mmio = (void __iomem *)ap->host->iomap;//[AHCI_BAR];
-+#endif
-+ u32 em_ctl;
-+ u32 message[] = {0, 0};
-+ unsigned long flags;
-+ int pmp;
-+ struct ahci_em_priv *emp;
-+
-+ /* get the slot number from the message */
-+ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
-+ if (pmp < EM_MAX_SLOTS)
-+ emp = &pp->em_priv[pmp];
-+ else
-+ return -EINVAL;
-+
-+ spin_lock_irqsave(ap->lock, flags);
-+
-+ /*
-+ * if we are still busy transmitting a previous message,
-+ * do not allow
-+ */
-+ em_ctl = readl(mmio + HOST_EM_CTL);
-+ if (em_ctl & EM_CTL_TM) {
-+ spin_unlock_irqrestore(ap->lock, flags);
-+ return -EBUSY;
-+ }
-+
-+ /*
-+ * create message header - this is all zero except for
-+ * the message size, which is 4 bytes.
-+ */
-+ message[0] |= (4 << 8);
-+
-+ /* ignore 0:4 of byte zero, fill in port info yourself */
-+ message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
-+
-+ /* write message to EM_LOC */
-+ writel(message[0], mmio + hpriv->em_loc);
-+ writel(message[1], mmio + hpriv->em_loc+4);
-+
-+ /* save off new led state for port/slot */
-+ emp->led_state = state;
-+
-+ /*
-+ * tell hardware to transmit the message
-+ */
-+ writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
-+
-+ spin_unlock_irqrestore(ap->lock, flags);
-+ return size;
-+}
-+
-+static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
-+{
-+ struct ahci_port_priv *pp = ap->private_data;
-+ struct ata_link *link;
-+ struct ahci_em_priv *emp;
-+ int rc = 0;
-+
-+ ata_for_each_link(link, ap, EDGE) {
-+ emp = &pp->em_priv[link->pmp];
-+ rc += sprintf(buf, "%lx\n", emp->led_state);
-+ }
-+ return rc;
-+}
-+
-+static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
-+ size_t size)
-+{
-+ int state;
-+ int pmp;
-+ struct ahci_port_priv *pp = ap->private_data;
-+ struct ahci_em_priv *emp;
-+
-+ state = simple_strtoul(buf, NULL, 0);
-+
-+ /* get the slot number from the message */
-+ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
-+ if (pmp < EM_MAX_SLOTS)
-+ emp = &pp->em_priv[pmp];
-+ else
-+ return -EINVAL;
-+
-+ /* mask off the activity bits if we are in sw_activity
-+ * mode, user should turn off sw_activity before setting
-+ * activity led through em_message
-+ */
-+ if (emp->blink_policy)
-+ state &= ~EM_MSG_LED_VALUE_ACTIVITY;
-+
-+ return ahci_transmit_led_message(ap, state, size);
-+}
-+
-+static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
-+{
-+ struct ata_link *link = dev->link;
-+ struct ata_port *ap = link->ap;
-+ struct ahci_port_priv *pp = ap->private_data;
-+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
-+ u32 port_led_state = emp->led_state;
-+
-+ /* save the desired Activity LED behavior */
-+ if (val == OFF) {
-+ /* clear LFLAG */
-+ link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
-+
-+ /* set the LED to OFF */
-+ port_led_state &= EM_MSG_LED_VALUE_OFF;
-+ port_led_state |= (ap->port_no | (link->pmp << 8));
-+ ahci_transmit_led_message(ap, port_led_state, 4);
-+ } else {
-+ link->flags |= ATA_LFLAG_SW_ACTIVITY;
-+ if (val == BLINK_OFF) {
-+ /* set LED to ON for idle */
-+ port_led_state &= EM_MSG_LED_VALUE_OFF;
-+ port_led_state |= (ap->port_no | (link->pmp << 8));
-+ port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
-+ ahci_transmit_led_message(ap, port_led_state, 4);
-+ }
-+ }
-+ emp->blink_policy = val;
-+ return 0;
-+}
-+
-+static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
-+{
-+ struct ata_link *link = dev->link;
-+ struct ata_port *ap = link->ap;
-+ struct ahci_port_priv *pp = ap->private_data;
-+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
-+
-+ /* display the saved value of activity behavior for this
-+ * disk.
-+ */
-+ return sprintf(buf, "%d\n", emp->blink_policy);
-+}
-+
-+#if 0
-+static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
-+ int port_no, void __iomem *mmio,
-+ void __iomem *port_mmio)
-+#else
-+static void ahci_port_init(struct platform_device *pdev, struct ata_port *ap,
-+ int port_no, void __iomem *mmio,
-+ void __iomem *port_mmio)
-+#endif
-+{
-+ const char *emsg = NULL;
-+ int rc;
-+ u32 tmp;
-+
-+ /* make sure port is not active */
-+ rc = ahci_deinit_port(ap, &emsg);
-+ if (rc)
-+ dev_printk(KERN_WARNING, &pdev->dev,
-+ "%s (%d)\n", emsg, rc);
-+
-+ /* clear SError */
-+ tmp = readl(port_mmio + PORT_SCR_ERR);
-+ VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
-+ writel(tmp, port_mmio + PORT_SCR_ERR);
-+
-+ /* clear port IRQ */
-+ tmp = readl(port_mmio + PORT_IRQ_STAT);
-+ VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
-+ if (tmp)
-+ writel(tmp, port_mmio + PORT_IRQ_STAT);
-+
-+ writel(1 << port_no, mmio + HOST_IRQ_STAT);
-+}
-+
-+static void ahci_init_controller(struct ata_host *host)
-+{
-+ struct ahci_host_priv *hpriv = host->private_data;
-+#if 0
-+ struct pci_dev *pdev = to_pci_dev(host->dev);
-+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
-+#else
-+ struct platform_device *pdev = to_platform_device(host->dev);
-+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
-+#endif
-+ int i;
-+ void __iomem *port_mmio;
-+ u32 tmp;
-+ int mv;
-+
-+ if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
-+#if 0
-+ if (pdev->device == 0x6121)
-+ mv = 2;
-+ else
-+ mv = 4;
-+#else
-+ mv = 0;
-+#endif
-+ port_mmio = __ahci_port_base(host, mv);
-+
-+ writel(0, port_mmio + PORT_IRQ_MASK);
-+
-+ /* clear port IRQ */
-+ tmp = readl(port_mmio + PORT_IRQ_STAT);
-+ VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
-+ if (tmp)
-+ writel(tmp, port_mmio + PORT_IRQ_STAT);
-+ }
-+
-+ /* set Timer 1ms, hclk = 200Mhz */
-+ /* FIXME: Add auto detect function */
-+ printk("CPU clock : %d \n", cns3xxx_cpu_clock());
-+ tmp = readl(mmio + HOST_TIMER1MS);
-+ printk("*** Timer 1ms: %d(0x%x) ***\n",tmp,tmp);
-+ writel(cns3xxx_cpu_clock()*500, mmio + HOST_TIMER1MS);
-+ tmp = readl(mmio + HOST_TIMER1MS);
-+ printk("*** Set to: %d(0x%x) ***\n",tmp, tmp);
-+
-+
-+
-+ for (i = 0; i < host->n_ports; i++) {
-+ struct ata_port *ap = host->ports[i];
-+
-+ port_mmio = ahci_port_base(ap);
-+ if (ata_port_is_dummy(ap))
-+ continue;
-+
-+ ahci_port_init(pdev, ap, i, mmio, port_mmio);
-+ }
-+
-+ tmp = readl(mmio + HOST_CTL);
-+ VPRINTK("HOST_CTL 0x%x\n", tmp);
-+ writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
-+ tmp = readl(mmio + HOST_CTL);
-+ VPRINTK("HOST_CTL 0x%x\n", tmp);
-+}
-+
-+static void ahci_dev_config(struct ata_device *dev)
-+{
-+ struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
-+
-+ if (hpriv->flags & AHCI_HFLAG_SECT255) {
-+ dev->max_sectors = 255;
-+ ata_dev_printk(dev, KERN_INFO,
-+ "SB600 AHCI: limiting to 255 sectors per cmd\n");
-+ }
-+}
-+
-+static unsigned int ahci_dev_classify(struct ata_port *ap)
-+{
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ struct ata_taskfile tf;
-+ u32 tmp;
-+
-+ tmp = readl(port_mmio + PORT_SIG);
-+ tf.lbah = (tmp >> 24) & 0xff;
-+ tf.lbam = (tmp >> 16) & 0xff;
-+ tf.lbal = (tmp >> 8) & 0xff;
-+ tf.nsect = (tmp) & 0xff;
-+
-+ return ata_dev_classify(&tf);
-+}
-+
-+static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
-+ u32 opts)
-+{
-+ dma_addr_t cmd_tbl_dma;
-+
-+ cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
-+
-+#if 0
-+ pp->cmd_slot[tag].opts = cpu_to_le32(opts);
-+#else
-+ pp->cmd_slot[tag].opts = opts;
-+#endif
-+ pp->cmd_slot[tag].status = 0;
-+#if 0
-+ pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
-+ pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
-+#else
-+ pp->cmd_slot[tag].tbl_addr = cmd_tbl_dma & 0xffffffff;
-+ pp->cmd_slot[tag].tbl_addr_hi = (cmd_tbl_dma >> 16) >> 16;
-+#endif
-+}
-+
-+static int ahci_kick_engine(struct ata_port *ap, int force_restart)
-+{
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
-+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
-+ u32 tmp;
-+ int busy, rc;
-+
-+ /* do we need to kick the port? */
-+ busy = status & (ATA_BUSY | ATA_DRQ);
-+ if (!busy && !force_restart)
-+ return 0;
-+
-+ /* stop engine */
-+ rc = ahci_stop_engine(ap);
-+ if (rc)
-+ goto out_restart;
-+
-+ /* need to do CLO? */
-+ if (!busy) {
-+ rc = 0;
-+ goto out_restart;
-+ }
-+
-+ if (!(hpriv->cap & HOST_CAP_CLO)) {
-+ rc = -EOPNOTSUPP;
-+ goto out_restart;
-+ }
-+
-+ /* perform CLO */
-+ tmp = readl(port_mmio + PORT_CMD);
-+ tmp |= PORT_CMD_CLO;
-+ writel(tmp, port_mmio + PORT_CMD);
-+
-+ rc = 0;
-+ tmp = ata_wait_register(port_mmio + PORT_CMD,
-+ PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
-+ if (tmp & PORT_CMD_CLO)
-+ rc = -EIO;
-+
-+ /* restart engine */
-+ out_restart:
-+ ahci_start_engine(ap);
-+ return rc;
-+}
-+
-+static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
-+ struct ata_taskfile *tf, int is_cmd, u16 flags,
-+ unsigned long timeout_msec)
-+{
-+ const u32 cmd_fis_len = 5; /* five dwords */
-+ struct ahci_port_priv *pp = ap->private_data;
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ u8 *fis = pp->cmd_tbl;
-+ u32 tmp;
-+
-+ /* prep the command */
-+ ata_tf_to_fis(tf, pmp, is_cmd, fis);
-+ ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
-+
-+ /* issue & wait */
-+ writel(1, port_mmio + PORT_CMD_ISSUE);
-+
-+ if (timeout_msec) {
-+ tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
-+ 1, timeout_msec);
-+ if (tmp & 0x1) {
-+ ahci_kick_engine(ap, 1);
-+ return -EBUSY;
-+ }
-+ } else
-+ readl(port_mmio + PORT_CMD_ISSUE); /* flush */
-+
-+ return 0;
-+}
-+
-+static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
-+ int pmp, unsigned long deadline,
-+ int (*check_ready)(struct ata_link *link))
-+{
-+ struct ata_port *ap = link->ap;
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
-+ const char *reason = NULL;
-+ unsigned long now, msecs;
-+ struct ata_taskfile tf;
-+ int rc;
-+
-+ DPRINTK("ENTER\n");
-+
-+ /* prepare for SRST (AHCI-1.1 10.4.1) */
-+ rc = ahci_kick_engine(ap, 1);
-+ if (rc && rc != -EOPNOTSUPP)
-+ ata_link_printk(link, KERN_WARNING,
-+ "failed to reset engine (errno=%d)\n", rc);
-+
-+ ata_tf_init(link->device, &tf);
-+
-+ /* issue the first D2H Register FIS */
-+ msecs = 0;
-+ now = jiffies;
-+ if (time_after(now, deadline))
-+ msecs = jiffies_to_msecs(deadline - now);
-+
-+ tf.ctl |= ATA_SRST;
-+ if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
-+ AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
-+ rc = -EIO;
-+ reason = "1st FIS failed";
-+ goto fail;
-+ }
-+
-+ /* spec says at least 5us, but be generous and sleep for 1ms */
-+ msleep(1);
-+
-+ /* issue the second D2H Register FIS */
-+ tf.ctl &= ~ATA_SRST;
-+ ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
-+
-+ /* wait for link to become ready */
-+ rc = ata_wait_after_reset(link, deadline, check_ready);
-+ if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
-+ /*
-+ * Workaround for cases where link online status can't
-+ * be trusted. Treat device readiness timeout as link
-+ * offline.
-+ */
-+ ata_link_printk(link, KERN_INFO,
-+ "device not ready, treating as offline\n");
-+ *class = ATA_DEV_NONE;
-+ } else if (rc) {
-+ /* link occupied, -ENODEV too is an error */
-+ reason = "device not ready";
-+ goto fail;
-+ } else
-+ *class = ahci_dev_classify(ap);
-+
-+ DPRINTK("EXIT, class=%u\n", *class);
-+ return 0;
-+
-+ fail:
-+ ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
-+ return rc;
-+}
-+
-+static int ahci_check_ready(struct ata_link *link)
-+{
-+ void __iomem *port_mmio = ahci_port_base(link->ap);
-+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
-+
-+ return ata_check_ready(status);
-+}
-+
-+static int ahci_softreset(struct ata_link *link, unsigned int *class,
-+ unsigned long deadline)
-+{
-+ int pmp = sata_srst_pmp(link);
-+
-+ DPRINTK("ENTER\n");
-+
-+ return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
-+}
-+
-+static int ahci_sb600_check_ready(struct ata_link *link)
-+{
-+ void __iomem *port_mmio = ahci_port_base(link->ap);
-+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
-+ u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
-+
-+ /*
-+ * There is no need to check TFDATA if BAD PMP is found due to HW bug,
-+ * which can save timeout delay.
-+ */
-+ if (irq_status & PORT_IRQ_BAD_PMP)
-+ return -EIO;
-+
-+ return ata_check_ready(status);
-+}
-+
-+static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
-+ unsigned long deadline)
-+{
-+ struct ata_port *ap = link->ap;
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ int pmp = sata_srst_pmp(link);
-+ int rc;
-+ u32 irq_sts;
-+
-+ DPRINTK("ENTER\n");
-+
-+ rc = ahci_do_softreset(link, class, pmp, deadline,
-+ ahci_sb600_check_ready);
-+
-+ /*
-+ * Soft reset fails on some ATI chips with IPMS set when PMP
-+ * is enabled but SATA HDD/ODD is connected to SATA port,
-+ * do soft reset again to port 0.
-+ */
-+ if (rc == -EIO) {
-+ irq_sts = readl(port_mmio + PORT_IRQ_STAT);
-+ if (irq_sts & PORT_IRQ_BAD_PMP) {
-+ ata_link_printk(link, KERN_WARNING,
-+ "applying SB600 PMP SRST workaround "
-+ "and retrying\n");
-+ rc = ahci_do_softreset(link, class, 0, deadline,
-+ ahci_check_ready);
-+ }
-+ }
-+
-+ return rc;
-+}
-+
-+static int ahci_hardreset(struct ata_link *link, unsigned int *class,
-+ unsigned long deadline)
-+{
-+ const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
-+ struct ata_port *ap = link->ap;
-+ struct ahci_port_priv *pp = ap->private_data;
-+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
-+ struct ata_taskfile tf;
-+ bool online;
-+ int rc;
-+
-+ DPRINTK("ENTER\n");
-+
-+ ahci_stop_engine(ap);
-+
-+ /* clear D2H reception area to properly wait for D2H FIS */
-+ ata_tf_init(link->device, &tf);
-+ tf.command = 0x80;
-+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
-+
-+ rc = sata_link_hardreset(link, timing, deadline, &online,
-+ ahci_check_ready);
-+
-+ ahci_start_engine(ap);
-+
-+ if (online)
-+ *class = ahci_dev_classify(ap);
-+
-+ DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
-+ return rc;
-+}
-+
-+static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
-+ unsigned long deadline)
-+{
-+ struct ata_port *ap = link->ap;
-+ bool online;
-+ int rc;
-+
-+ DPRINTK("ENTER\n");
-+
-+ ahci_stop_engine(ap);
-+
-+ rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
-+ deadline, &online, NULL);
-+
-+ ahci_start_engine(ap);
-+
-+ DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
-+
-+ /* vt8251 doesn't clear BSY on signature FIS reception,
-+ * request follow-up softreset.
-+ */
-+ return online ? -EAGAIN : rc;
-+}
-+
-+#if 0
-+static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
-+ unsigned long deadline)
-+{
-+ struct ata_port *ap = link->ap;
-+ struct ahci_port_priv *pp = ap->private_data;
-+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
-+ struct ata_taskfile tf;
-+ bool online;
-+ int rc;
-+
-+ ahci_stop_engine(ap);
-+
-+ /* clear D2H reception area to properly wait for D2H FIS */
-+ ata_tf_init(link->device, &tf);
-+ tf.command = 0x80;
-+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
-+
-+ rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
-+ deadline, &online, NULL);
-+
-+ ahci_start_engine(ap);
-+
-+ /* The pseudo configuration device on SIMG4726 attached to
-+ * ASUS P5W-DH Deluxe doesn't send signature FIS after
-+ * hardreset if no device is attached to the first downstream
-+ * port && the pseudo device locks up on SRST w/ PMP==0. To
-+ * work around this, wait for !BSY only briefly. If BSY isn't
-+ * cleared, perform CLO and proceed to IDENTIFY (achieved by
-+ * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
-+ *
-+ * Wait for two seconds. Devices attached to downstream port
-+ * which can't process the following IDENTIFY after this will
-+ * have to be reset again. For most cases, this should
-+ * suffice while making probing snappish enough.
-+ */
-+ if (online) {
-+ rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
-+ ahci_check_ready);
-+ if (rc)
-+ ahci_kick_engine(ap, 0);
-+ }
-+ return rc;
-+}
-+#endif
-+
-+static void ahci_postreset(struct ata_link *link, unsigned int *class)
-+{
-+ struct ata_port *ap = link->ap;
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ u32 new_tmp, tmp;
-+
-+ ata_std_postreset(link, class);
-+
-+ /* Make sure port's ATAPI bit is set appropriately */
-+ new_tmp = tmp = readl(port_mmio + PORT_CMD);
-+ if (*class == ATA_DEV_ATAPI)
-+ new_tmp |= PORT_CMD_ATAPI;
-+ else
-+ new_tmp &= ~PORT_CMD_ATAPI;
-+ if (new_tmp != tmp) {
-+ writel(new_tmp, port_mmio + PORT_CMD);
-+ readl(port_mmio + PORT_CMD); /* flush */
-+ }
-+}
-+
-+static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
-+{
-+ struct scatterlist *sg;
-+ struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
-+ unsigned int si;
-+
-+ VPRINTK("ENTER\n");
-+
-+ /*
-+ * Next, the S/G list.
-+ */
-+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
-+ dma_addr_t addr = sg_dma_address(sg);
-+ u32 sg_len = sg_dma_len(sg);
-+
-+#if 0
-+ ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
-+ ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
-+ ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
-+#else
-+ ahci_sg[si].addr = addr & 0xffffffff;
-+ ahci_sg[si].addr_hi = (addr >> 16) >> 16;
-+ ahci_sg[si].flags_size = sg_len - 1;
-+#endif
-+ }
-+
-+ return si;
-+}
-+
-+static void ahci_qc_prep(struct ata_queued_cmd *qc)
-+{
-+ struct ata_port *ap = qc->ap;
-+ struct ahci_port_priv *pp = ap->private_data;
-+ int is_atapi = ata_is_atapi(qc->tf.protocol);
-+ void *cmd_tbl;
-+ u32 opts;
-+ const u32 cmd_fis_len = 5; /* five dwords */
-+ unsigned int n_elem;
-+
-+ /*
-+ * Fill in command table information. First, the header,
-+ * a SATA Register - Host to Device command FIS.
-+ */
-+ cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
-+
-+ ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
-+ if (is_atapi) {
-+ memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
-+ memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
-+ }
-+
-+ n_elem = 0;
-+ if (qc->flags & ATA_QCFLAG_DMAMAP)
-+ n_elem = ahci_fill_sg(qc, cmd_tbl);
-+
-+ /*
-+ * Fill in command slot information.
-+ */
-+ opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
-+ if (qc->tf.flags & ATA_TFLAG_WRITE)
-+ opts |= AHCI_CMD_WRITE;
-+ if (is_atapi)
-+ opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
-+
-+ ahci_fill_cmd_slot(pp, qc->tag, opts);
-+}
-+
-+static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
-+{
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
-+ struct ahci_port_priv *pp = ap->private_data;
-+ struct ata_eh_info *host_ehi = &ap->link.eh_info;
-+ struct ata_link *link = NULL;
-+ struct ata_queued_cmd *active_qc;
-+ struct ata_eh_info *active_ehi;
-+ u32 serror;
-+
-+ /* determine active link */
-+ ata_for_each_link(link, ap, EDGE)
-+ if (ata_link_active(link))
-+ break;
-+ if (!link)
-+ link = &ap->link;
-+
-+ active_qc = ata_qc_from_tag(ap, link->active_tag);
-+ active_ehi = &link->eh_info;
-+
-+ /* record irq stat */
-+ ata_ehi_clear_desc(host_ehi);
-+ ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
-+
-+ /* AHCI needs SError cleared; otherwise, it might lock up */
-+ ahci_scr_read(&ap->link, SCR_ERROR, &serror);
-+ ahci_scr_write(&ap->link, SCR_ERROR, serror);
-+ host_ehi->serror |= serror;
-+
-+ /* some controllers set IRQ_IF_ERR on device errors, ignore it */
-+ if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
-+ irq_stat &= ~PORT_IRQ_IF_ERR;
-+
-+ if (irq_stat & PORT_IRQ_TF_ERR) {
-+ /* If qc is active, charge it; otherwise, the active
-+ * link. There's no active qc on NCQ errors. It will
-+ * be determined by EH by reading log page 10h.
-+ */
-+ if (active_qc)
-+ active_qc->err_mask |= AC_ERR_DEV;
-+ else
-+ active_ehi->err_mask |= AC_ERR_DEV;
-+
-+ if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
-+ host_ehi->serror &= ~SERR_INTERNAL;
-+ }
-+
-+ if (irq_stat & PORT_IRQ_UNK_FIS) {
-+ u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
-+
-+ active_ehi->err_mask |= AC_ERR_HSM;
-+ active_ehi->action |= ATA_EH_RESET;
-+ ata_ehi_push_desc(active_ehi,
-+ "unknown FIS %08x %08x %08x %08x" ,
-+ unk[0], unk[1], unk[2], unk[3]);
-+ }
-+
-+ if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
-+ active_ehi->err_mask |= AC_ERR_HSM;
-+ active_ehi->action |= ATA_EH_RESET;
-+ ata_ehi_push_desc(active_ehi, "incorrect PMP");
-+ }
-+
-+ if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
-+ host_ehi->err_mask |= AC_ERR_HOST_BUS;
-+ host_ehi->action |= ATA_EH_RESET;
-+ ata_ehi_push_desc(host_ehi, "host bus error");
-+ }
-+
-+ if (irq_stat & PORT_IRQ_IF_ERR) {
-+ host_ehi->err_mask |= AC_ERR_ATA_BUS;
-+ host_ehi->action |= ATA_EH_RESET;
-+ ata_ehi_push_desc(host_ehi, "interface fatal error");
-+ }
-+
-+ if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
-+ ata_ehi_hotplugged(host_ehi);
-+ ata_ehi_push_desc(host_ehi, "%s",
-+ irq_stat & PORT_IRQ_CONNECT ?
-+ "connection status changed" : "PHY RDY changed");
-+ }
-+
-+ /* okay, let's hand over to EH */
-+
-+ if (irq_stat & PORT_IRQ_FREEZE)
-+ ata_port_freeze(ap);
-+ else
-+ ata_port_abort(ap);
-+}
-+
-+static void ahci_port_intr(struct ata_port *ap)
-+{
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ struct ata_eh_info *ehi = &ap->link.eh_info;
-+ struct ahci_port_priv *pp = ap->private_data;
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
-+ int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
-+ u32 status, qc_active;
-+ int rc;
-+
-+ status = readl(port_mmio + PORT_IRQ_STAT);
-+ writel(status, port_mmio + PORT_IRQ_STAT);
-+
-+ /* ignore BAD_PMP while resetting */
-+ if (unlikely(resetting))
-+ status &= ~PORT_IRQ_BAD_PMP;
-+
-+ /* If we are getting PhyRdy, this is
-+ * just a power state change, we should
-+ * clear out this, plus the PhyRdy/Comm
-+ * Wake bits from Serror
-+ */
-+ if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
-+ (status & PORT_IRQ_PHYRDY)) {
-+ status &= ~PORT_IRQ_PHYRDY;
-+ ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
-+ }
-+
-+ if (unlikely(status & PORT_IRQ_ERROR)) {
-+ ahci_error_intr(ap, status);
-+ return;
-+ }
-+
-+ if (status & PORT_IRQ_SDB_FIS) {
-+ /* If SNotification is available, leave notification
-+ * handling to sata_async_notification(). If not,
-+ * emulate it by snooping SDB FIS RX area.
-+ *
-+ * Snooping FIS RX area is probably cheaper than
-+ * poking SNotification but some constrollers which
-+ * implement SNotification, ICH9 for example, don't
-+ * store AN SDB FIS into receive area.
-+ */
-+ if (hpriv->cap & HOST_CAP_SNTF)
-+ sata_async_notification(ap);
-+ else {
-+ /* If the 'N' bit in word 0 of the FIS is set,
-+ * we just received asynchronous notification.
-+ * Tell libata about it.
-+ */
-+ const __le32 *f = pp->rx_fis + RX_FIS_SDB;
-+#if 0
-+ u32 f0 = le32_to_cpu(f[0]);
-+#else
-+ u32 f0 = f[0];
-+#endif
-+
-+ if (f0 & (1 << 15))
-+ sata_async_notification(ap);
-+ }
-+ }
-+
-+ /* pp->active_link is valid iff any command is in flight */
-+ if (ap->qc_active && pp->active_link->sactive)
-+ qc_active = readl(port_mmio + PORT_SCR_ACT);
-+ else
-+ qc_active = readl(port_mmio + PORT_CMD_ISSUE);
-+
-+ rc = ata_qc_complete_multiple(ap, qc_active);
-+
-+ /* while resetting, invalid completions are expected */
-+ if (unlikely(rc < 0 && !resetting)) {
-+ ehi->err_mask |= AC_ERR_HSM;
-+ ehi->action |= ATA_EH_RESET;
-+ ata_port_freeze(ap);
-+ }
-+}
-+
-+static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
-+{
-+ struct ata_host *host = dev_instance;
-+ struct ahci_host_priv *hpriv;
-+ unsigned int i, handled = 0;
-+ void __iomem *mmio;
-+ u32 irq_stat, irq_masked;
-+
-+ VPRINTK("ENTER\n");
-+
-+ hpriv = host->private_data;
-+#if 0
-+ mmio = host->iomap[AHCI_PCI_BAR];
-+#else
-+ mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
-+#endif
-+
-+ /* sigh. 0xffffffff is a valid return from h/w */
-+ irq_stat = readl(mmio + HOST_IRQ_STAT);
-+ if (!irq_stat)
-+ return IRQ_NONE;
-+
-+ irq_masked = irq_stat & hpriv->port_map;
-+
-+ spin_lock(&host->lock);
-+
-+ for (i = 0; i < host->n_ports; i++) {
-+ struct ata_port *ap;
-+
-+ if (!(irq_masked & (1 << i)))
-+ continue;
-+
-+ ap = host->ports[i];
-+ if (ap) {
-+ ahci_port_intr(ap);
-+ VPRINTK("port %u\n", i);
-+ } else {
-+ VPRINTK("port %u (no irq)\n", i);
-+ if (ata_ratelimit())
-+ dev_printk(KERN_WARNING, host->dev,
-+ "interrupt on disabled port %u\n", i);
-+ }
-+
-+ handled = 1;
-+ }
-+
-+ /* HOST_IRQ_STAT behaves as level triggered latch meaning that
-+ * it should be cleared after all the port events are cleared;
-+ * otherwise, it will raise a spurious interrupt after each
-+ * valid one. Please read section 10.6.2 of ahci 1.1 for more
-+ * information.
-+ *
-+ * Also, use the unmasked value to clear interrupt as spurious
-+ * pending event on a dummy port might cause screaming IRQ.
-+ */
-+ writel(irq_stat, mmio + HOST_IRQ_STAT);
-+
-+ spin_unlock(&host->lock);
-+
-+ VPRINTK("EXIT\n");
-+
-+ return IRQ_RETVAL(handled);
-+}
-+
-+static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
-+{
-+ struct ata_port *ap = qc->ap;
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ struct ahci_port_priv *pp = ap->private_data;
-+
-+ /* Keep track of the currently active link. It will be used
-+ * in completion path to determine whether NCQ phase is in
-+ * progress.
-+ */
-+ pp->active_link = qc->dev->link;
-+
-+ if (qc->tf.protocol == ATA_PROT_NCQ)
-+ writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
-+ writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
-+
-+ ahci_sw_activity(qc->dev->link);
-+
-+ return 0;
-+}
-+
-+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
-+{
-+ struct ahci_port_priv *pp = qc->ap->private_data;
-+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
-+
-+ ata_tf_from_fis(d2h_fis, &qc->result_tf);
-+ return true;
-+}
-+
-+static void ahci_freeze(struct ata_port *ap)
-+{
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+
-+ /* turn IRQ off */
-+ writel(0, port_mmio + PORT_IRQ_MASK);
-+}
-+
-+static void ahci_thaw(struct ata_port *ap)
-+{
-+#if 0
-+ void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-+#else
-+ void __iomem *mmio = (void __iomem *)ap->host->iomap;//[AHCI_BAR];
-+#endif
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ u32 tmp;
-+ struct ahci_port_priv *pp = ap->private_data;
-+
-+ /* clear IRQ */
-+ tmp = readl(port_mmio + PORT_IRQ_STAT);
-+ writel(tmp, port_mmio + PORT_IRQ_STAT);
-+ writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
-+
-+ /* turn IRQ back on */
-+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-+}
-+
-+static void ahci_error_handler(struct ata_port *ap)
-+{
-+ if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
-+ /* restart engine */
-+ ahci_stop_engine(ap);
-+ ahci_start_engine(ap);
-+ }
-+
-+ sata_pmp_error_handler(ap);
-+}
-+
-+static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
-+{
-+ struct ata_port *ap = qc->ap;
-+
-+ /* make DMA engine forget about the failed command */
-+ if (qc->flags & ATA_QCFLAG_FAILED)
-+ ahci_kick_engine(ap, 1);
-+}
-+
-+static void ahci_pmp_attach(struct ata_port *ap)
-+{
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ struct ahci_port_priv *pp = ap->private_data;
-+ u32 cmd;
-+
-+ cmd = readl(port_mmio + PORT_CMD);
-+ cmd |= PORT_CMD_PMP;
-+ writel(cmd, port_mmio + PORT_CMD);
-+
-+ pp->intr_mask |= PORT_IRQ_BAD_PMP;
-+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-+}
-+
-+static void ahci_pmp_detach(struct ata_port *ap)
-+{
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ struct ahci_port_priv *pp = ap->private_data;
-+ u32 cmd;
-+
-+ cmd = readl(port_mmio + PORT_CMD);
-+ cmd &= ~PORT_CMD_PMP;
-+ writel(cmd, port_mmio + PORT_CMD);
-+
-+ pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
-+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-+}
-+
-+static int ahci_port_resume(struct ata_port *ap)
-+{
-+ ahci_power_up(ap);
-+ ahci_start_port(ap);
-+
-+ if (sata_pmp_attached(ap))
-+ ahci_pmp_attach(ap);
-+ else
-+ ahci_pmp_detach(ap);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
-+{
-+ const char *emsg = NULL;
-+ int rc;
-+
-+ rc = ahci_deinit_port(ap, &emsg);
-+ if (rc == 0)
-+ ahci_power_down(ap);
-+ else {
-+ ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
-+ ahci_start_port(ap);
-+ }
-+
-+ return rc;
-+}
-+
-+static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
-+{
-+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
-+ struct ahci_host_priv *hpriv = host->private_data;
-+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
-+ u32 ctl;
-+
-+ if (mesg.event & PM_EVENT_SUSPEND &&
-+ hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
-+ dev_printk(KERN_ERR, &pdev->dev,
-+ "BIOS update required for suspend/resume\n");
-+ return -EIO;
-+ }
-+
-+ if (mesg.event & PM_EVENT_SLEEP) {
-+ /* AHCI spec rev1.1 section 8.3.3:
-+ * Software must disable interrupts prior to requesting a
-+ * transition of the HBA to D3 state.
-+ */
-+ ctl = readl(mmio + HOST_CTL);
-+ ctl &= ~HOST_IRQ_EN;
-+ writel(ctl, mmio + HOST_CTL);
-+ readl(mmio + HOST_CTL); /* flush */
-+ }
-+
-+ return ata_pci_device_suspend(pdev, mesg);
-+}
-+
-+static int ahci_pci_device_resume(struct pci_dev *pdev)
-+{
-+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
-+ int rc;
-+
-+ rc = ata_pci_device_do_resume(pdev);
-+ if (rc)
-+ return rc;
-+
-+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
-+ rc = ahci_reset_controller(host);
-+ if (rc)
-+ return rc;
-+
-+ ahci_init_controller(host);
-+ }
-+
-+ ata_host_resume(host);
-+
-+ return 0;
-+}
-+#endif
-+
-+static int ahci_port_start(struct ata_port *ap)
-+{
-+ struct device *dev = ap->host->dev;
-+ struct ahci_port_priv *pp;
-+ void *mem;
-+ dma_addr_t mem_dma;
-+
-+ pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
-+ if (!pp)
-+ return -ENOMEM;
-+
-+ mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
-+ GFP_KERNEL);
-+ if (!mem)
-+ return -ENOMEM;
-+ memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
-+
-+ /*
-+ * First item in chunk of DMA memory: 32-slot command table,
-+ * 32 bytes each in size
-+ */
-+ pp->cmd_slot = mem;
-+ pp->cmd_slot_dma = mem_dma;
-+
-+ mem += AHCI_CMD_SLOT_SZ;
-+ mem_dma += AHCI_CMD_SLOT_SZ;
-+
-+ /*
-+ * Second item: Received-FIS area
-+ */
-+ pp->rx_fis = mem;
-+ pp->rx_fis_dma = mem_dma;
-+
-+ mem += AHCI_RX_FIS_SZ;
-+ mem_dma += AHCI_RX_FIS_SZ;
-+
-+ /*
-+ * Third item: data area for storing a single command
-+ * and its scatter-gather table
-+ */
-+ pp->cmd_tbl = mem;
-+ pp->cmd_tbl_dma = mem_dma;
-+
-+ /*
-+ * Save off initial list of interrupts to be enabled.
-+ * This could be changed later
-+ */
-+ pp->intr_mask = DEF_PORT_IRQ;
-+
-+ ap->private_data = pp;
-+
-+ /* engage engines, captain */
-+ return ahci_port_resume(ap);
-+}
-+
-+static void ahci_port_stop(struct ata_port *ap)
-+{
-+ const char *emsg = NULL;
-+ int rc;
-+
-+ /* de-initialize port */
-+ rc = ahci_deinit_port(ap, &emsg);
-+ if (rc)
-+ ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
-+}
-+
-+#if 0
-+static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
-+{
-+ int rc;
-+
-+ if (using_dac &&
-+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
-+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
-+ if (rc) {
-+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-+ if (rc) {
-+ dev_printk(KERN_ERR, &pdev->dev,
-+ "64-bit DMA enable failed\n");
-+ return rc;
-+ }
-+ }
-+ } else {
-+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-+ if (rc) {
-+ dev_printk(KERN_ERR, &pdev->dev,
-+ "32-bit DMA enable failed\n");
-+ return rc;
-+ }
-+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-+ if (rc) {
-+ dev_printk(KERN_ERR, &pdev->dev,
-+ "32-bit consistent DMA enable failed\n");
-+ return rc;
-+ }
-+ }
-+ return 0;
-+}
-+#endif
-+
-+static void ahci_print_info(struct ata_host *host)
-+{
-+ struct ahci_host_priv *hpriv = host->private_data;
-+#if 0
-+ struct pci_dev *pdev = to_pci_dev(host->dev);
-+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
-+#else
-+ struct platform_device *pdev = to_platform_device(host->dev);
-+ void __iomem *mmio = (void __iomem *)host->iomap;//[AHCI_BAR];
-+#endif
-+ u32 vers, cap, impl, speed;
-+ const char *speed_s;
-+#if 0
-+ u16 cc;
-+#endif
-+ const char *scc_s;
-+
-+ vers = readl(mmio + HOST_VERSION);
-+ cap = hpriv->cap;
-+ impl = hpriv->port_map;
-+
-+ speed = (cap >> 20) & 0xf;
-+ if (speed == 1)
-+ speed_s = "1.5";
-+ else if (speed == 2)
-+ speed_s = "3";
-+ else if (speed == 3)
-+ speed_s = "6";
-+ else
-+ speed_s = "?";
-+
-+#if 0
-+ pci_read_config_word(pdev, 0x0a, &cc);
-+ if (cc == PCI_CLASS_STORAGE_IDE)
-+ scc_s = "IDE";
-+ else if (cc == PCI_CLASS_STORAGE_SATA)
-+ scc_s = "SATA";
-+ else if (cc == PCI_CLASS_STORAGE_RAID)
-+ scc_s = "RAID";
-+ else
-+ scc_s = "unknown";
-+#else
-+ scc_s = "SATA";
-+#endif
-+
-+ dev_printk(KERN_INFO, &pdev->dev,
-+ "AHCI %02x%02x.%02x%02x "
-+ "%u slots %u ports %s Gbps 0x%x impl %s mode\n"
-+ ,
-+
-+ (vers >> 24) & 0xff,
-+ (vers >> 16) & 0xff,
-+ (vers >> 8) & 0xff,
-+ vers & 0xff,
-+
-+ ((cap >> 8) & 0x1f) + 1,
-+ (cap & 0x1f) + 1,
-+ speed_s,
-+ impl,
-+ scc_s);
-+
-+ dev_printk(KERN_INFO, &pdev->dev,
-+ "flags: "
-+ "%s%s%s%s%s%s%s"
-+ "%s%s%s%s%s%s%s"
-+ "%s\n"
-+ ,
-+
-+ cap & (1 << 31) ? "64bit " : "",
-+ cap & (1 << 30) ? "ncq " : "",
-+ cap & (1 << 29) ? "sntf " : "",
-+ cap & (1 << 28) ? "ilck " : "",
-+ cap & (1 << 27) ? "stag " : "",
-+ cap & (1 << 26) ? "pm " : "",
-+ cap & (1 << 25) ? "led " : "",
-+
-+ cap & (1 << 24) ? "clo " : "",
-+ cap & (1 << 19) ? "nz " : "",
-+ cap & (1 << 18) ? "only " : "",
-+ cap & (1 << 17) ? "pmp " : "",
-+ cap & (1 << 15) ? "pio " : "",
-+ cap & (1 << 14) ? "slum " : "",
-+ cap & (1 << 13) ? "part " : "",
-+ cap & (1 << 6) ? "ems ": ""
-+ );
-+}
-+
-+#if 0
-+/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
-+ * hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't
-+ * support PMP and the 4726 either directly exports the device
-+ * attached to the first downstream port or acts as a hardware storage
-+ * controller and emulate a single ATA device (can be RAID 0/1 or some
-+ * other configuration).
-+ *
-+ * When there's no device attached to the first downstream port of the
-+ * 4726, "Config Disk" appears, which is a pseudo ATA device to
-+ * configure the 4726. However, ATA emulation of the device is very
-+ * lame. It doesn't send signature D2H Reg FIS after the initial
-+ * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
-+ *
-+ * The following function works around the problem by always using
-+ * hardreset on the port and not depending on receiving signature FIS
-+ * afterward. If signature FIS isn't received soon, ATA class is
-+ * assumed without follow-up softreset.
-+ */
-+static void ahci_p5wdh_workaround(struct ata_host *host)
-+{
-+ static struct dmi_system_id sysids[] = {
-+ {
-+ .ident = "P5W DH Deluxe",
-+ .matches = {
-+ DMI_MATCH(DMI_SYS_VENDOR,
-+ "ASUSTEK COMPUTER INC"),
-+ DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
-+ },
-+ },
-+ { }
-+ };
-+ struct pci_dev *pdev = to_pci_dev(host->dev);
-+
-+ if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
-+ dmi_check_system(sysids)) {
-+ struct ata_port *ap = host->ports[1];
-+
-+ dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
-+ "Deluxe on-board SIMG4726 workaround\n");
-+
-+ ap->ops = &ahci_p5wdh_ops;
-+ ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
-+ }
-+}
-+
-+/*
-+ * SB600 ahci controller on ASUS M2A-VM can't do 64bit DMA with older
-+ * BIOS. The oldest version known to be broken is 0901 and working is
-+ * 1501 which was released on 2007-10-26. Force 32bit DMA on anything
-+ * older than 1501. Please read bko#9412 for more info.
-+ */
-+static bool ahci_asus_m2a_vm_32bit_only(struct pci_dev *pdev)
-+{
-+ static const struct dmi_system_id sysids[] = {
-+ {
-+ .ident = "ASUS M2A-VM",
-+ .matches = {
-+ DMI_MATCH(DMI_BOARD_VENDOR,
-+ "ASUSTeK Computer INC."),
-+ DMI_MATCH(DMI_BOARD_NAME, "M2A-VM"),
-+ },
-+ },
-+ { }
-+ };
-+ const char *cutoff_mmdd = "10/26";
-+ const char *date;
-+ int year;
-+
-+ if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) ||
-+ !dmi_check_system(sysids))
-+ return false;
-+
-+ /*
-+ * Argh.... both version and date are free form strings.
-+ * Let's hope they're using the same date format across
-+ * different versions.
-+ */
-+ date = dmi_get_system_info(DMI_BIOS_DATE);
-+ year = dmi_get_year(DMI_BIOS_DATE);
-+ if (date && strlen(date) >= 10 && date[2] == '/' && date[5] == '/' &&
-+ (year > 2007 ||
-+ (year == 2007 && strncmp(date, cutoff_mmdd, 5) >= 0)))
-+ return false;
-+
-+ dev_printk(KERN_WARNING, &pdev->dev, "ASUS M2A-VM: BIOS too old, "
-+ "forcing 32bit DMA, update BIOS\n");
-+
-+ return true;
-+}
-+
-+static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
-+{
-+ static const struct dmi_system_id broken_systems[] = {
-+ {
-+ .ident = "HP Compaq nx6310",
-+ .matches = {
-+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
-+ },
-+ /* PCI slot number of the controller */
-+ .driver_data = (void *)0x1FUL,
-+ },
-+ {
-+ .ident = "HP Compaq 6720s",
-+ .matches = {
-+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"),
-+ },
-+ /* PCI slot number of the controller */
-+ .driver_data = (void *)0x1FUL,
-+ },
-+
-+ { } /* terminate list */
-+ };
-+ const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
-+
-+ if (dmi) {
-+ unsigned long slot = (unsigned long)dmi->driver_data;
-+ /* apply the quirk only to on-board controllers */
-+ return slot == PCI_SLOT(pdev->devfn);
-+ }
-+
-+ return false;
-+}
-+
-+static bool ahci_broken_suspend(struct pci_dev *pdev)
-+{
-+ static const struct dmi_system_id sysids[] = {
-+ /*
-+ * On HP dv[4-6] and HDX18 with earlier BIOSen, link
-+ * to the harddisk doesn't become online after
-+ * resuming from STR. Warn and fail suspend.
-+ */
-+ {
-+ .ident = "dv4",
-+ .matches = {
-+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-+ DMI_MATCH(DMI_PRODUCT_NAME,
-+ "HP Pavilion dv4 Notebook PC"),
-+ },
-+ .driver_data = "F.30", /* cutoff BIOS version */
-+ },
-+ {
-+ .ident = "dv5",
-+ .matches = {
-+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-+ DMI_MATCH(DMI_PRODUCT_NAME,
-+ "HP Pavilion dv5 Notebook PC"),
-+ },
-+ .driver_data = "F.16", /* cutoff BIOS version */
-+ },
-+ {
-+ .ident = "dv6",
-+ .matches = {
-+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-+ DMI_MATCH(DMI_PRODUCT_NAME,
-+ "HP Pavilion dv6 Notebook PC"),
-+ },
-+ .driver_data = "F.21", /* cutoff BIOS version */
-+ },
-+ {
-+ .ident = "HDX18",
-+ .matches = {
-+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-+ DMI_MATCH(DMI_PRODUCT_NAME,
-+ "HP HDX18 Notebook PC"),
-+ },
-+ .driver_data = "F.23", /* cutoff BIOS version */
-+ },
-+ { } /* terminate list */
-+ };
-+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
-+ const char *ver;
-+
-+ if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2))
-+ return false;
-+
-+ ver = dmi_get_system_info(DMI_BIOS_VERSION);
-+
-+ return !ver || strcmp(ver, dmi->driver_data) < 0;
-+}
-+
-+static bool ahci_broken_online(struct pci_dev *pdev)
-+{
-+#define ENCODE_BUSDEVFN(bus, slot, func) \
-+ (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
-+ static const struct dmi_system_id sysids[] = {
-+ /*
-+ * There are several gigabyte boards which use
-+ * SIMG5723s configured as hardware RAID. Certain
-+ * 5723 firmware revisions shipped there keep the link
-+ * online but fail to answer properly to SRST or
-+ * IDENTIFY when no device is attached downstream
-+ * causing libata to retry quite a few times leading
-+ * to excessive detection delay.
-+ *
-+ * As these firmwares respond to the second reset try
-+ * with invalid device signature, considering unknown
-+ * sig as offline works around the problem acceptably.
-+ */
-+ {
-+ .ident = "EP45-DQ6",
-+ .matches = {
-+ DMI_MATCH(DMI_BOARD_VENDOR,
-+ "Gigabyte Technology Co., Ltd."),
-+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
-+ },
-+ .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
-+ },
-+ {
-+ .ident = "EP45-DS5",
-+ .matches = {
-+ DMI_MATCH(DMI_BOARD_VENDOR,
-+ "Gigabyte Technology Co., Ltd."),
-+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
-+ },
-+ .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
-+ },
-+ { } /* terminate list */
-+ };
-+#undef ENCODE_BUSDEVFN
-+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
-+ unsigned int val;
-+
-+ if (!dmi)
-+ return false;
-+
-+ val = (unsigned long)dmi->driver_data;
-+
-+ return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
-+}
-+
-+#endif
-+static int ahci_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct ata_host *host = dev_get_drvdata(dev);
-+
-+ ata_host_detach(host);
-+ return 0;
-+}
-+
-+#if 0
-+static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
-+#else
-+static int __init ahci_probe(struct platform_device *pdev)
-+#endif
-+{
-+ static int printed_version;
-+#if 0
-+ unsigned int board_id = ent->driver_data;
-+ struct ata_port_info pi = ahci_port_info[board_id];
-+#else
-+ struct ata_port_info pi = ahci_port_info[board_ahci];
-+#endif
-+ const struct ata_port_info *ppi[] = { &pi, NULL };
-+ struct device *dev = &pdev->dev;
-+ struct ahci_host_priv *hpriv;
-+ struct ata_host *host;
-+ int n_ports, i, rc;
-+ struct resource *res;
-+ u8 *base = NULL;
-+
-+ VPRINTK("ENTER\n");
-+
-+ WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
-+
-+ if (!printed_version++)
-+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
-+
-+#if 0
-+ /* The AHCI driver can only drive the SATA ports, the PATA driver
-+ can drive them all so if both drivers are selected make sure
-+ AHCI stays out of the way */
-+ if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
-+ return -ENODEV;
-+
-+ /* acquire resources */
-+ rc = pcim_enable_device(pdev);
-+ if (rc)
-+ return rc;
-+
-+ /* AHCI controllers often implement SFF compatible interface.
-+ * Grab all PCI BARs just in case.
-+ */
-+ rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
-+ if (rc == -EBUSY)
-+ pcim_pin_device(pdev);
-+ if (rc)
-+ return rc;
-+
-+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
-+ (pdev->device == 0x2652 || pdev->device == 0x2653)) {
-+ u8 map;
-+
-+ /* ICH6s share the same PCI ID for both piix and ahci
-+ * modes. Enabling ahci mode while MAP indicates
-+ * combined mode is a bad idea. Yield to ata_piix.
-+ */
-+ pci_read_config_byte(pdev, ICH_MAP, &map);
-+ if (map & 0x3) {
-+ dev_printk(KERN_INFO, &pdev->dev, "controller is in "
-+ "combined mode, can't enable AHCI mode\n");
-+ return -ENODEV;
-+ }
-+ }
-+#endif
-+
-+ hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
-+ if (!hpriv)
-+ return -ENOMEM;
-+ hpriv->flags |= (unsigned long)pi.private_data;
-+
-+#if 0
-+ /* MCP65 revision A1 and A2 can't do MSI */
-+ if (board_id == board_ahci_mcp65 &&
-+ (pdev->revision == 0xa1 || pdev->revision == 0xa2))
-+ hpriv->flags |= AHCI_HFLAG_NO_MSI;
-+
-+ /* SB800 does NOT need the workaround to ignore SERR_INTERNAL */
-+ if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
-+ hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
-+
-+ /* apply ASUS M2A_VM quirk */
-+ if (ahci_asus_m2a_vm_32bit_only(pdev))
-+ hpriv->flags |= AHCI_HFLAG_32BIT_ONLY;
-+
-+ if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
-+ pci_enable_msi(pdev);
-+#endif
-+
-+ /* Cavium CNS3XXX Initial */
-+ /* Get SATA register base address */
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev, "no reg addr\n");
-+ return -ENODEV;
-+ }
-+
-+ /* ioremap SATA registers */
-+ base = devm_ioremap(&pdev->dev, res->start, res->end - res->start + 1);
-+
-+ if (!base) {
-+ dev_err(&pdev->dev, "ioremap failed for 0x%x\n", res->start);
-+ return -ENODEV;
-+ }
-+
-+#if 0
-+ /* reset PHY test chip */
-+ printk("*** Reset PHY ***\n");
-+ CNS3XXX_MISC_REGISTER |= 0xF;
-+ mdelay(100);
-+
-+ printk("%s %d, base:0x%x\n",__FUNCTION__,__LINE__,(u32)base);
-+
-+ /* set PI first */
-+ printk("*** Manually set PI ***\n");
-+ writel(0x1, (void __iomem *)base + HOST_PORTS_IMPL);
-+ printk("*** Now PI is: 0x%x ***\n",readl((void __iomem *)base + HOST_PORTS_IMPL));
-+#endif
-+
-+
-+
-+
-+ /* save initial config */
-+#if 0
-+ ahci_save_initial_config(pdev, hpriv);
-+#else
-+ ahci_save_initial_config(pdev, hpriv, base);
-+#endif
-+
-+ /* prepare host */
-+ if (hpriv->cap & HOST_CAP_NCQ)
-+ pi.flags |= ATA_FLAG_NCQ;
-+
-+ if (hpriv->cap & HOST_CAP_PMP)
-+ pi.flags |= ATA_FLAG_PMP;
-+
-+ if (ahci_em_messages && (hpriv->cap & HOST_CAP_EMS)) {
-+ u8 messages;
-+#if 0
-+ void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
-+#else
-+ void __iomem *mmio = (void __iomem *)base;
-+#endif
-+ u32 em_loc = readl(mmio + HOST_EM_LOC);
-+ u32 em_ctl = readl(mmio + HOST_EM_CTL);
-+
-+ messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
-+
-+ /* we only support LED message type right now */
-+ if ((messages & 0x01) && (ahci_em_messages == 1)) {
-+ /* store em_loc */
-+ hpriv->em_loc = ((em_loc >> 16) * 4);
-+ pi.flags |= ATA_FLAG_EM;
-+ if (!(em_ctl & EM_CTL_ALHD))
-+ pi.flags |= ATA_FLAG_SW_ACTIVITY;
-+ }
-+ }
-+
-+#if 0
-+ if (ahci_broken_system_poweroff(pdev)) {
-+ pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
-+ dev_info(&pdev->dev,
-+ "quirky BIOS, skipping spindown on poweroff\n");
-+ }
-+
-+ if (ahci_broken_suspend(pdev)) {
-+ hpriv->flags |= AHCI_HFLAG_NO_SUSPEND;
-+ dev_printk(KERN_WARNING, &pdev->dev,
-+ "BIOS update required for suspend/resume\n");
-+ }
-+
-+ if (ahci_broken_online(pdev)) {
-+ hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
-+ dev_info(&pdev->dev,
-+ "online status unreliable, applying workaround\n");
-+ }
-+#endif
-+
-+ /* CAP.NP sometimes indicate the index of the last enabled
-+ * port, at other times, that of the last possible port, so
-+ * determining the maximum port number requires looking at
-+ * both CAP.NP and port_map.
-+ */
-+ n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
-+
-+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
-+ if (!host)
-+ return -ENOMEM;
-+#if 0
-+ host->iomap = pcim_iomap_table(pdev);
-+#else
-+ host->iomap = (void __iomem *)base;
-+#endif
-+ host->private_data = hpriv;
-+
-+ if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
-+ host->flags |= ATA_HOST_PARALLEL_SCAN;
-+ else
-+ printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
-+
-+ if (pi.flags & ATA_FLAG_EM)
-+ ahci_reset_em(host);
-+
-+ for (i = 0; i < host->n_ports; i++) {
-+ struct ata_port *ap = host->ports[i];
-+
-+#if 0
-+ ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
-+ ata_port_pbar_desc(ap, AHCI_PCI_BAR,
-+ 0x100 + ap->port_no * 0x80, "port");
-+#else
-+ ata_port_desc(ap, "%s %s%llu@0x%llx", "ahci bar", "m",
-+ (long long)(res->end - res->start) + 1, (long long)res->start);
-+ ata_port_desc(ap, "%s 0x%llx", "port",
-+ (long long)res->start + 0x100 + ap->port_no * 0x80);
-+#endif
-+
-+ /* set initial link pm policy */
-+ ap->pm_policy = NOT_AVAILABLE;
-+
-+ /* set enclosure management message type */
-+ if (ap->flags & ATA_FLAG_EM)
-+ ap->em_message_type = ahci_em_messages;
-+
-+
-+ /* disabled/not-implemented port */
-+ if (!(hpriv->port_map & (1 << i)))
-+ ap->ops = &ata_dummy_port_ops;
-+ }
-+
-+#if 0
-+ /* apply workaround for ASUS P5W DH Deluxe mainboard */
-+ ahci_p5wdh_workaround(host);
-+
-+ /* initialize adapter */
-+ rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
-+ if (rc)
-+ return rc;
-+#endif
-+
-+ rc = ahci_reset_controller(host);
-+ if (rc)
-+ return rc;
-+
-+ ahci_init_controller(host);
-+ ahci_print_info(host);
-+
-+#if 0
-+ pci_set_master(pdev);
-+#endif
-+
-+
-+
-+#if 0
-+ return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
-+ &ahci_sht);
-+#else
-+ /* Get SATA port interrupt number */
-+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev, "no SATA irq\n");
-+ return -ENODEV;
-+ }
-+
-+ return ata_host_activate(host, res->start, ahci_interrupt, IRQF_SHARED,
-+ &ahci_sht);
-+
-+
-+#endif
-+}
-+
-+
-+#if defined(CONFIG_CNS3XXX_SILICON) || defined(CONFIG_SILICON)
-+static void ahci_phy_init(void){
-+
-+ u32 u32tmp;
-+
-+
-+ u32tmp = MISC_SATA_POWER_MODE;
-+ u32tmp |= 0x1<< 16; // Disable SATA PHY 0 from SLUMBER Mode
-+ u32tmp |= 0x1<< 17; // Disable SATA PHY 1 from SLUMBER Mode
-+ MISC_SATA_POWER_MODE = u32tmp;
-+
-+ /* Enable SATA PHY */
-+ cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
-+ cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
-+
-+ /* Enable SATA Clock */
-+ cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
-+
-+ /* De-Asscer SATA Reset */
-+ u32tmp = PM_SOFT_RST_REG;
-+ u32tmp |= 0x1 << PM_SOFT_RST_REG_OFFST_SATA;
-+ PM_SOFT_RST_REG = u32tmp;
-+}
-+#endif
-+
-+
-+
-+static int __init ahci_init(void)
-+{
-+#if 0
-+ return pci_register_driver(&ahci_pci_driver);
-+#else
-+ printk("CNS3XXX AHCI SATA low-level driver\n");
-+#if defined(CONFIG_CNS3XXX_SILICON) || defined(CONFIG_SILICON)
-+ ahci_phy_init();
-+#endif
-+ return platform_driver_register(&ahci_driver);
-+#endif
-+}
-+
-+static void __exit ahci_exit(void)
-+{
-+#if 0
-+ pci_unregister_driver(&ahci_pci_driver);
-+#else
-+ platform_driver_unregister(&ahci_driver);
-+#endif
-+}
-+
-+
-+MODULE_AUTHOR("Jeff Garzik");
-+MODULE_DESCRIPTION("AHCI SATA low-level driver");
-+MODULE_LICENSE("GPL");
-+#if 0
-+MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
-+#endif
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(ahci_init);
-+module_exit(ahci_exit);
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -47,6 +47,14 @@ config SATA_PMP
- This option adds support for SATA Port Multipliers
- (the SATA version of an ethernet hub, or SAS expander).
-
-+config SATA_CNS3XXX_AHCI
-+ tristate "Cavium CNS3XXX AHCI SATA support"
-+ help
-+ This option enables support for AHCI Serial ATA support for Cavium CNS3XXX.
-+
-+ If unsure, say N.
-+
-+
- config SATA_AHCI
- tristate "AHCI SATA support"
- depends on PCI
---- a/drivers/ata/libata-scsi.c
-+++ b/drivers/ata/libata-scsi.c
-@@ -3096,12 +3096,22 @@ int ata_scsi_queuecmd(struct scsi_cmnd *
- struct scsi_device *scsidev = cmd->device;
- struct Scsi_Host *shost = scsidev->host;
- int rc = 0;
--
-+#ifdef CONFIG_SMP
-+ u32 flags;
-+ local_save_flags(flags);
-+#endif
- ap = ata_shost_to_port(shost);
-
- spin_unlock(shost->host_lock);
-+#ifndef CONFIG_SMP
- spin_lock(ap->lock);
--
-+#else
-+ while(!spin_trylock(ap->lock)){
-+ if(!irqs_disabled()) continue;
-+ local_irq_enable();
-+ local_irq_restore(flags);
-+ }
-+#endif
- ata_scsi_dump_cdb(ap, cmd);
-
- dev = ata_scsi_find_dev(ap, scsidev);
---- a/drivers/ata/libata-sff.c
-+++ b/drivers/ata/libata-sff.c
-@@ -893,6 +893,9 @@ static void ata_pio_sector(struct ata_qu
- do_write);
- }
-
-+ if (!do_write)
-+ flush_dcache_page(page);
-+
- qc->curbytes += qc->sect_size;
- qc->cursg_ofs += qc->sect_size;
-
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -1,6 +1,7 @@
-
- obj-$(CONFIG_ATA) += libata.o
-
-+obj-$(CONFIG_SATA_CNS3XXX_AHCI) += cns3xxx_ahci.o
- obj-$(CONFIG_SATA_AHCI) += ahci.o
- obj-$(CONFIG_SATA_SVW) += sata_svw.o
- obj-$(CONFIG_ATA_PIIX) += ata_piix.o
+++ /dev/null
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-cns3xxx.c
-@@ -0,0 +1,388 @@
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <asm/io.h>
-+#include <linux/wait.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
-+#include <mach/pm.h>
-+
-+/*
-+ * We need the memory map
-+ */
-+
-+#include <mach/board.h>
-+
-+#define MISC_MEM_MAP_VALUE(reg_offset) (*((uint32_t volatile *)(CNS3XXX_MISC_BASE_VIRT + reg_offset)))
-+#define MISC_IOCDB_CTRL MISC_MEM_MAP_VALUE(0x020)
-+
-+#define I2C_MEM_MAP_ADDR(x) (CNS3XXX_SSP_BASE_VIRT + x)
-+#define I2C_MEM_MAP_VALUE(x) (*((unsigned int volatile*)I2C_MEM_MAP_ADDR(x)))
-+
-+#define I2C_CONTROLLER_REG I2C_MEM_MAP_VALUE(0x20)
-+#define I2C_TIME_OUT_REG I2C_MEM_MAP_VALUE(0x24)
-+#define I2C_SLAVE_ADDRESS_REG I2C_MEM_MAP_VALUE(0x28)
-+#define I2C_WRITE_DATA_REG I2C_MEM_MAP_VALUE(0x2C)
-+#define I2C_READ_DATA_REG I2C_MEM_MAP_VALUE(0x30)
-+#define I2C_INTERRUPT_STATUS_REG I2C_MEM_MAP_VALUE(0x34)
-+#define I2C_INTERRUPT_ENABLE_REG I2C_MEM_MAP_VALUE(0x38)
-+#define I2C_TWI_OUT_DLY_REG I2C_MEM_MAP_VALUE(0x3C)
-+
-+#define I2C_BUS_ERROR_FLAG (0x1)
-+#define I2C_ACTION_DONE_FLAG (0x2)
-+
-+#define CNS3xxx_I2C_ENABLE() (I2C_CONTROLLER_REG) |= ((unsigned int)0x1 << 31)
-+#define CNS3xxx_I2C_DISABLE() (I2C_CONTROLLER_REG) &= ~((unsigned int)0x1 << 31)
-+#define CNS3xxx_I2C_ENABLE_INTR() (I2C_INTERRUPT_ENABLE_REG) |= 0x03
-+#define CNS3xxx_I2C_DISABLE_INTR() (I2C_INTERRUPT_ENABLE_REG) &= 0xfc
-+
-+#define TWI_TIMEOUT (10*HZ)
-+#define I2C_100KHZ 100000
-+#define I2C_200KHZ 200000
-+#define I2C_300KHZ 300000
-+#define I2C_400KHZ 400000
-+
-+#define CNS3xxx_I2C_CLK I2C_100KHZ
-+
-+#define STATE_DONE 1
-+#define STATE_ERROR 2
-+
-+struct cns3xxx_i2c {
-+ void __iomem *base;
-+ wait_queue_head_t wait;
-+ struct i2c_adapter adap;
-+ struct i2c_msg *msg;
-+ int state; /* see STATE_ */
-+ int rd_wr_len;
-+ u8 *buf;
-+};
-+
-+static u32 cns3xxx_i2c_func(struct i2c_adapter *adap)
-+{
-+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static int
-+cns3xxx_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg)
-+{
-+ struct cns3xxx_i2c *i2c = i2c_get_adapdata(adap);
-+ int i, j;
-+ u8 buf[1] = { 0 };
-+
-+ if (msg->len == 0) {
-+ /*
-+ * We are probably doing a probe for a device here,
-+ * so set the length to one, and data to 0
-+ */
-+ msg->len = 1;
-+ i2c->buf = buf;
-+ } else {
-+ i2c->buf = msg->buf;
-+ }
-+
-+ if (msg->flags & I2C_M_TEN) {
-+ printk
-+ ("%s:%d: Presently the driver does not handle extended addressing\n",
-+ __FUNCTION__, __LINE__);
-+ return -EINVAL;
-+ }
-+ i2c->msg = msg;
-+
-+ for (i = 0; i < msg->len; i++) {
-+ if (msg->len - i >= 4)
-+ i2c->rd_wr_len = 3;
-+ else
-+ i2c->rd_wr_len = msg->len - i - 1;
-+
-+ // Set Data Width and TWI_EN
-+ I2C_CONTROLLER_REG = 0x80000000 | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
-+
-+ // Clear Write Reg
-+ I2C_WRITE_DATA_REG = 0;
-+
-+ // Set the slave address
-+ I2C_SLAVE_ADDRESS_REG = (msg->addr << 1);
-+
-+ // Are we Writing
-+ if (!(msg->flags & I2C_M_RD)) {
-+ I2C_CONTROLLER_REG |= (1 << 4);
-+ if (i != 0) {
-+ /*
-+ * We need to set the address in the first byte.
-+ * The base address is going to be in buf[0] and then
-+ * it needs to be incremented by i - 1.
-+ */
-+ i2c->buf--;
-+ *i2c->buf = buf[0] + i - 1;
-+
-+ if (i2c->rd_wr_len < 3) {
-+ i += i2c->rd_wr_len;
-+ i2c->rd_wr_len++;
-+ I2C_CONTROLLER_REG = 0x80000000 | (1 << 4) | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
-+ } else {
-+ i += i2c->rd_wr_len - 1;
-+ }
-+ } else {
-+ i += i2c->rd_wr_len;
-+ buf[0] = *i2c->buf;
-+ }
-+ for (j = 0; j <= i2c->rd_wr_len; j++) {
-+ I2C_WRITE_DATA_REG |= ((*i2c->buf++) << (8 * j));
-+ }
-+ } else {
-+ i += i2c->rd_wr_len;
-+ }
-+
-+ // Start the Transfer
-+ i2c->state = 0; // Clear out the State
-+ I2C_CONTROLLER_REG |= (1 << 6);
-+
-+ if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
-+ (i2c->state == STATE_DONE), TWI_TIMEOUT)) {
-+ if (i2c->state == STATE_ERROR) {
-+ return -EIO;
-+ }
-+ } else {
-+ return -ETIMEDOUT;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static int
-+cns3xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
-+{
-+ int i;
-+ int ret;
-+ for (i = 0; i < num; i++)
-+ {
-+ ret = cns3xxx_i2c_xfer_msg(adap, &msgs[i]);
-+ if (ret < 0) {
-+ return ret;
-+ }
-+ }
-+ return num;
-+}
-+
-+
-+static struct i2c_algorithm cns3xxx_i2c_algo = {
-+ .master_xfer = cns3xxx_i2c_xfer,
-+ .functionality = cns3xxx_i2c_func,
-+};
-+
-+static struct i2c_adapter cns3xxx_i2c_adapter = {
-+ .owner = THIS_MODULE,
-+ .algo = &cns3xxx_i2c_algo,
-+ .algo_data = NULL,
-+ .nr = 0,
-+ .name = "CNS3xxx I2C 0",
-+ .retries = 5,
-+};
-+
-+static void cns3xxx_i2c_adapter_init(struct cns3xxx_i2c *i2c)
-+{
-+
-+ /* Steps
-+ * 1. Check if the power is enabled to the module (PMU_BASE + 0x010)
-+ * 2. Enable the clock (Enabled by default (PMU doc
-+ * but check clk status anyway PMU_BASE + 0X00C)
-+ * 3. Configure the registers of i2c
-+ */
-+
-+ // if (!CNS3xxx_I2C_POWER_ON())
-+// CNS3xxx_I2C_POWER_ENABLE();
-+
-+ // if (!CNS3xxx_I2C_CLOCK())
-+ // CNS3xxx_I2C_CLOCK_ENABLE();
-+
-+ cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
-+ cns3xxx_pwr_power_up(0x1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
-+ cns3xxx_pwr_soft_rst(0x1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
-+
-+ /* Disable the I2C */
-+ I2C_CONTROLLER_REG = 0; /* Disabled the I2C */
-+
-+ //enable SCL and SDA which share pin with GPIOB_PIN_EN(0x18)
-+ //GPIOB[12]: SCL
-+ //GPIOB[13]: SDA
-+ (*(u32*)(CNS3XXX_MISC_BASE_VIRT+0x18)) |= ((1<<12)|(1<<13));
-+
-+ MISC_IOCDB_CTRL &= ~0x300;
-+ MISC_IOCDB_CTRL |= 0x300; //21mA...
-+
-+ /* Check the Reg Dump when testing */
-+ I2C_TIME_OUT_REG =
-+ ((((((cns3xxx_cpu_clock()*(1000000/8)) / (2 * CNS3xxx_I2C_CLK)) -
-+ 1) & 0x3FF) << 8) | (1 << 7) | 0x7F);
-+ I2C_TWI_OUT_DLY_REG |= 0x3;
-+
-+ /* Enable The Interrupt */
-+ CNS3xxx_I2C_ENABLE_INTR();
-+
-+ /* Clear Interrupt Status (0x2 | 0x1) */
-+ I2C_INTERRUPT_STATUS_REG |= (I2C_ACTION_DONE_FLAG | I2C_BUS_ERROR_FLAG);
-+
-+ /* Enable the I2C Controller */
-+ CNS3xxx_I2C_ENABLE();
-+}
-+
-+static irqreturn_t cns3xxx_i2c_isr(int irq, void *dev_id)
-+{
-+ struct cns3xxx_i2c *i2c = dev_id;
-+ int i;
-+ uint32_t stat = I2C_INTERRUPT_STATUS_REG;
-+
-+ /* Clear Interrupt */
-+ I2C_INTERRUPT_STATUS_REG |= 0x1;
-+
-+ if (stat & I2C_BUS_ERROR_FLAG) {
-+ i2c->state = STATE_ERROR;
-+ } else {
-+ if (i2c->msg->flags & I2C_M_RD) {
-+ for (i = 0; i <= i2c->rd_wr_len; i++)
-+ {
-+ *i2c->buf++ = ((I2C_READ_DATA_REG >> (8 * i)) & 0xff);
-+ }
-+ }
-+ i2c->state = STATE_DONE;
-+ }
-+ wake_up(&i2c->wait);
-+ return IRQ_HANDLED;
-+}
-+
-+static int __devinit cns3xxx_i2c_probe(struct platform_device *pdev)
-+{
-+ struct cns3xxx_i2c *i2c;
-+ struct resource *res, *res2;
-+ int ret;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ printk("%s: IORESOURCE_MEM not defined \n", __FUNCTION__);
-+ return -ENODEV;
-+ }
-+
-+ res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (!res2) {
-+ printk("%s: IORESOURCE_IRQ not defined \n", __FUNCTION__);
-+ return -ENODEV;
-+ }
-+
-+ i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
-+ if (!i2c)
-+ return -ENOMEM;
-+
-+ if (!request_mem_region(res->start, res->end - res->start + 1,
-+ pdev->name)) {
-+ dev_err(&pdev->dev, "Memory region busy\n");
-+ ret = -EBUSY;
-+ goto request_mem_failed;
-+ }
-+
-+ i2c->base = ioremap(res->start, res->end - res->start + 1);
-+ if (!i2c->base) {
-+ dev_err(&pdev->dev, "Unable to map registers\n");
-+ ret = -EIO;
-+ goto map_failed;
-+ }
-+
-+ cns3xxx_i2c_adapter_init(i2c);
-+
-+ init_waitqueue_head(&i2c->wait);
-+ ret = request_irq(res2->start, cns3xxx_i2c_isr, 0, pdev->name, i2c);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Cannot claim IRQ\n");
-+ goto request_irq_failed;
-+ }
-+
-+ platform_set_drvdata(pdev, i2c);
-+ i2c->adap = cns3xxx_i2c_adapter;
-+ i2c_set_adapdata(&i2c->adap, i2c);
-+ i2c->adap.dev.parent = &pdev->dev;
-+
-+ /* add i2c adapter to i2c tree */
-+ ret = i2c_add_numbered_adapter(&i2c->adap);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Failed to add adapter\n");
-+ goto add_adapter_failed;
-+ }
-+
-+ return 0;
-+
-+ add_adapter_failed:
-+ free_irq(res2->start, i2c);
-+ request_irq_failed:
-+ iounmap(i2c->base);
-+ map_failed:
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ request_mem_failed:
-+ kfree(i2c);
-+
-+ return ret;
-+}
-+
-+static int __devexit cns3xxx_i2c_remove(struct platform_device *pdev)
-+{
-+ struct cns3xxx_i2c *i2c = platform_get_drvdata(pdev);
-+ struct resource *res;
-+
-+ /* disable i2c logic */
-+ CNS3xxx_I2C_DISABLE_INTR();
-+ CNS3xxx_I2C_DISABLE();
-+ /* remove adapter & data */
-+ i2c_del_adapter(&i2c->adap);
-+ platform_set_drvdata(pdev, NULL);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (res)
-+ free_irq(res->start, i2c);
-+
-+ iounmap(i2c->base);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (res)
-+ release_mem_region(res->start, res->end - res->start + 1);
-+
-+ kfree(i2c);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+#warning "CONFIG_PM defined: suspend and resume not implemented"
-+#define cns3xxx_i2c_suspend NULL
-+#define cns3xxx_i2c_resume NULL
-+#else
-+#define cns3xxx_i2c_suspend NULL
-+#define cns3xxx_i2c_resume NULL
-+#endif
-+
-+static struct platform_driver cns3xxx_i2c_driver = {
-+ .probe = cns3xxx_i2c_probe,
-+ .remove = cns3xxx_i2c_remove,
-+ .suspend = cns3xxx_i2c_suspend,
-+ .resume = cns3xxx_i2c_resume,
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "cns3xxx-i2c",
-+ },
-+};
-+
-+static int __init cns3xxx_i2c_init(void)
-+{
-+ return platform_driver_register(&cns3xxx_i2c_driver);
-+}
-+
-+static void __exit cns3xxx_i2c_exit(void)
-+{
-+ platform_driver_unregister(&cns3xxx_i2c_driver);
-+}
-+
-+module_init(cns3xxx_i2c_init);
-+module_exit(cns3xxx_i2c_exit);
-+
-+MODULE_AUTHOR("Cavium Networks");
-+MODULE_DESCRIPTION("Cavium CNS3XXX I2C Controller");
-+MODULE_LICENSE("GPL");
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -422,6 +422,12 @@ config I2C_MV64XXX
- This driver can also be built as a module. If so, the module
- will be called i2c-mv64xxx.
-
-+config I2C_CNS3XXX
-+ tristate "Cavium Networks CNS3XXX I2C Controller"
-+ depends on ARCH_CNS3XXX
-+ help
-+ Supports the Cavium Networks CNS3XXX on-chip I2C interfaces
-+
- config I2C_OCORES
- tristate "OpenCores I2C Controller"
- depends on EXPERIMENTAL
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -39,6 +39,7 @@ obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
- obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
- obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
- obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
-+obj-$(CONFIG_I2C_CNS3XXX) += i2c-cns3xxx.o
- obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o
- obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
- obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
+++ /dev/null
---- a/drivers/mmc/card/block.c
-+++ b/drivers/mmc/card/block.c
-@@ -130,7 +130,7 @@ mmc_blk_getgeo(struct block_device *bdev
- return 0;
- }
-
--static struct block_device_operations mmc_bdops = {
-+static const struct block_device_operations mmc_bdops = {
- .open = mmc_blk_open,
- .release = mmc_blk_release,
- .getgeo = mmc_blk_getgeo,
-@@ -392,13 +392,9 @@ static int mmc_blk_issue_rq(struct mmc_q
- } while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
- (R1_CURRENT_STATE(cmd.resp[0]) == 7));
-
--#if 0
- if (cmd.resp[0] & ~0x00000900)
- printk(KERN_ERR "%s: status = %08x\n",
- req->rq_disk->disk_name, cmd.resp[0]);
-- if (mmc_decode_status(cmd.resp))
-- goto cmd_err;
--#endif
- }
-
- if (brq.cmd.error || brq.stop.error || brq.data.error) {
---- a/drivers/mmc/core/core.c
-+++ b/drivers/mmc/core/core.c
-@@ -37,6 +37,9 @@
- #include "sd_ops.h"
- #include "sdio_ops.h"
-
-+/* scott.trace */
-+//#define MMC_DEBUG
-+
- static struct workqueue_struct *workqueue;
-
- /*
-@@ -90,17 +93,30 @@ void mmc_request_done(struct mmc_host *h
- cmd->error = 0;
- host->ops->request(host, mrq);
- } else {
-+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
- led_trigger_event(host->led, LED_OFF);
-+#endif
-
- pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
- mmc_hostname(host), cmd->opcode, err,
- cmd->resp[0], cmd->resp[1],
- cmd->resp[2], cmd->resp[3]);
-+#ifdef MMC_DEBUG
-+ printk("[MMC_DEBUG] %s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
-+ mmc_hostname(host), cmd->opcode, err,
-+ cmd->resp[0], cmd->resp[1],
-+ cmd->resp[2], cmd->resp[3]);
-+#endif
-
- if (mrq->data) {
- pr_debug("%s: %d bytes transferred: %d\n",
- mmc_hostname(host),
- mrq->data->bytes_xfered, mrq->data->error);
-+#ifdef MMC_DEBUG
-+ printk("[MMC_DEBUG] %s: %d bytes transferred: %d\n",
-+ mmc_hostname(host),
-+ mrq->data->bytes_xfered, mrq->data->error);
-+#endif
- }
-
- if (mrq->stop) {
-@@ -109,6 +125,13 @@ void mmc_request_done(struct mmc_host *h
- mrq->stop->error,
- mrq->stop->resp[0], mrq->stop->resp[1],
- mrq->stop->resp[2], mrq->stop->resp[3]);
-+#ifdef MMC_DEBUG
-+ printk("[MMC_DEBUG] %s: (CMD%u): %d: %08x %08x %08x %08x\n",
-+ mmc_hostname(host), mrq->stop->opcode,
-+ mrq->stop->error,
-+ mrq->stop->resp[0], mrq->stop->resp[1],
-+ mrq->stop->resp[2], mrq->stop->resp[3]);
-+#endif
- }
-
- if (mrq->done)
-@@ -129,6 +152,11 @@ mmc_start_request(struct mmc_host *host,
- pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
- mmc_hostname(host), mrq->cmd->opcode,
- mrq->cmd->arg, mrq->cmd->flags);
-+#ifdef MMC_DEBUG
-+ printk("[MMC_DEBUG] %s: starting CMD%u arg %08x flags %08x\n",
-+ mmc_hostname(host), mrq->cmd->opcode,
-+ mrq->cmd->arg, mrq->cmd->flags);
-+#endif
-
- if (mrq->data) {
- pr_debug("%s: blksz %d blocks %d flags %08x "
-@@ -137,17 +165,32 @@ mmc_start_request(struct mmc_host *host,
- mrq->data->blocks, mrq->data->flags,
- mrq->data->timeout_ns / 1000000,
- mrq->data->timeout_clks);
-+#ifdef MMC_DEBUG
-+ printk("[MMC_DEBUG] %s: blksz %d blocks %d flags %08x "
-+ "tsac %d ms nsac %d\n",
-+ mmc_hostname(host), mrq->data->blksz,
-+ mrq->data->blocks, mrq->data->flags,
-+ mrq->data->timeout_ns / 1000000,
-+ mrq->data->timeout_clks);
-+#endif
- }
-
- if (mrq->stop) {
- pr_debug("%s: CMD%u arg %08x flags %08x\n",
- mmc_hostname(host), mrq->stop->opcode,
- mrq->stop->arg, mrq->stop->flags);
-+#ifdef MMC_DEBUG
-+ printk("[MMC_DEBUG] %s: CMD%u arg %08x flags %08x\n",
-+ mmc_hostname(host), mrq->stop->opcode,
-+ mrq->stop->arg, mrq->stop->flags);
-+#endif
- }
-
- WARN_ON(!host->claimed);
-
-+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
- led_trigger_event(host->led, LED_FULL);
-+#endif
-
- mrq->cmd->error = 0;
- mrq->cmd->mrq = mrq;
-@@ -286,9 +329,9 @@ void mmc_set_data_timeout(struct mmc_dat
- * The limit is really 250 ms, but that is
- * insufficient for some crappy cards.
- */
-- limit_us = 300000;
-+ limit_us = 500000;
- else
-- limit_us = 100000;
-+ limit_us = 200000;
-
- /*
- * SDHC cards always use these fixed values.
-@@ -344,6 +387,101 @@ unsigned int mmc_align_data_size(struct
- EXPORT_SYMBOL(mmc_align_data_size);
-
- /**
-+ * mmc_host_enable - enable a host.
-+ * @host: mmc host to enable
-+ *
-+ * Hosts that support power saving can use the 'enable' and 'disable'
-+ * methods to exit and enter power saving states. For more information
-+ * see comments for struct mmc_host_ops.
-+ */
-+int mmc_host_enable(struct mmc_host *host)
-+{
-+ if (!(host->caps & MMC_CAP_DISABLE))
-+ return 0;
-+
-+ if (host->en_dis_recurs)
-+ return 0;
-+
-+ if (host->nesting_cnt++)
-+ return 0;
-+
-+ cancel_delayed_work_sync(&host->disable);
-+
-+ if (host->enabled)
-+ return 0;
-+
-+ if (host->ops->enable) {
-+ int err;
-+
-+ host->en_dis_recurs = 1;
-+ err = host->ops->enable(host);
-+ host->en_dis_recurs = 0;
-+
-+ if (err) {
-+ pr_debug("%s: enable error %d\n",
-+ mmc_hostname(host), err);
-+ return err;
-+ }
-+ }
-+ host->enabled = 1;
-+ return 0;
-+}
-+EXPORT_SYMBOL(mmc_host_enable);
-+
-+static int mmc_host_do_disable(struct mmc_host *host, int lazy)
-+{
-+ if (host->ops->disable) {
-+ int err;
-+
-+ host->en_dis_recurs = 1;
-+ err = host->ops->disable(host, lazy);
-+ host->en_dis_recurs = 0;
-+
-+ if (err < 0) {
-+ pr_debug("%s: disable error %d\n",
-+ mmc_hostname(host), err);
-+ return err;
-+ }
-+ if (err > 0) {
-+ unsigned long delay = msecs_to_jiffies(err);
-+
-+ mmc_schedule_delayed_work(&host->disable, delay);
-+ }
-+ }
-+ host->enabled = 0;
-+ return 0;
-+}
-+
-+/**
-+ * mmc_host_disable - disable a host.
-+ * @host: mmc host to disable
-+ *
-+ * Hosts that support power saving can use the 'enable' and 'disable'
-+ * methods to exit and enter power saving states. For more information
-+ * see comments for struct mmc_host_ops.
-+ */
-+int mmc_host_disable(struct mmc_host *host)
-+{
-+ int err;
-+
-+ if (!(host->caps & MMC_CAP_DISABLE))
-+ return 0;
-+
-+ if (host->en_dis_recurs)
-+ return 0;
-+
-+ if (--host->nesting_cnt)
-+ return 0;
-+
-+ if (!host->enabled)
-+ return 0;
-+
-+ err = mmc_host_do_disable(host, 0);
-+ return err;
-+}
-+EXPORT_SYMBOL(mmc_host_disable);
-+
-+/**
- * __mmc_claim_host - exclusively claim a host
- * @host: mmc host to claim
- * @abort: whether or not the operation should be aborted
-@@ -366,25 +504,111 @@ int __mmc_claim_host(struct mmc_host *ho
- while (1) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- stop = abort ? atomic_read(abort) : 0;
-- if (stop || !host->claimed)
-+ if (stop || !host->claimed || host->claimer == current)
- break;
- spin_unlock_irqrestore(&host->lock, flags);
- schedule();
- spin_lock_irqsave(&host->lock, flags);
- }
- set_current_state(TASK_RUNNING);
-- if (!stop)
-+ if (!stop) {
- host->claimed = 1;
-- else
-+ host->claimer = current;
-+ host->claim_cnt += 1;
-+ } else
- wake_up(&host->wq);
- spin_unlock_irqrestore(&host->lock, flags);
- remove_wait_queue(&host->wq, &wait);
-+ if (!stop)
-+ mmc_host_enable(host);
- return stop;
- }
-
- EXPORT_SYMBOL(__mmc_claim_host);
-
- /**
-+ * mmc_try_claim_host - try exclusively to claim a host
-+ * @host: mmc host to claim
-+ *
-+ * Returns %1 if the host is claimed, %0 otherwise.
-+ */
-+int mmc_try_claim_host(struct mmc_host *host)
-+{
-+ int claimed_host = 0;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&host->lock, flags);
-+ if (!host->claimed || host->claimer == current) {
-+ host->claimed = 1;
-+ host->claimer = current;
-+ host->claim_cnt += 1;
-+ claimed_host = 1;
-+ }
-+ spin_unlock_irqrestore(&host->lock, flags);
-+ return claimed_host;
-+}
-+EXPORT_SYMBOL(mmc_try_claim_host);
-+
-+static void mmc_do_release_host(struct mmc_host *host)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&host->lock, flags);
-+ if (--host->claim_cnt) {
-+ /* Release for nested claim */
-+ spin_unlock_irqrestore(&host->lock, flags);
-+ } else {
-+ host->claimed = 0;
-+ host->claimer = NULL;
-+ spin_unlock_irqrestore(&host->lock, flags);
-+ wake_up(&host->wq);
-+ }
-+}
-+
-+void mmc_host_deeper_disable(struct work_struct *work)
-+{
-+ struct mmc_host *host =
-+ container_of(work, struct mmc_host, disable.work);
-+
-+ /* If the host is claimed then we do not want to disable it anymore */
-+ if (!mmc_try_claim_host(host))
-+ return;
-+ mmc_host_do_disable(host, 1);
-+ mmc_do_release_host(host);
-+}
-+
-+/**
-+ * mmc_host_lazy_disable - lazily disable a host.
-+ * @host: mmc host to disable
-+ *
-+ * Hosts that support power saving can use the 'enable' and 'disable'
-+ * methods to exit and enter power saving states. For more information
-+ * see comments for struct mmc_host_ops.
-+ */
-+int mmc_host_lazy_disable(struct mmc_host *host)
-+{
-+ if (!(host->caps & MMC_CAP_DISABLE))
-+ return 0;
-+
-+ if (host->en_dis_recurs)
-+ return 0;
-+
-+ if (--host->nesting_cnt)
-+ return 0;
-+
-+ if (!host->enabled)
-+ return 0;
-+
-+ if (host->disable_delay) {
-+ mmc_schedule_delayed_work(&host->disable,
-+ msecs_to_jiffies(host->disable_delay));
-+ return 0;
-+ } else
-+ return mmc_host_do_disable(host, 1);
-+}
-+EXPORT_SYMBOL(mmc_host_lazy_disable);
-+
-+/**
- * mmc_release_host - release a host
- * @host: mmc host to release
- *
-@@ -393,15 +617,11 @@ EXPORT_SYMBOL(__mmc_claim_host);
- */
- void mmc_release_host(struct mmc_host *host)
- {
-- unsigned long flags;
--
- WARN_ON(!host->claimed);
-
-- spin_lock_irqsave(&host->lock, flags);
-- host->claimed = 0;
-- spin_unlock_irqrestore(&host->lock, flags);
-+ mmc_host_lazy_disable(host);
-
-- wake_up(&host->wq);
-+ mmc_do_release_host(host);
- }
-
- EXPORT_SYMBOL(mmc_release_host);
-@@ -687,7 +907,13 @@ void mmc_set_timing(struct mmc_host *hos
- */
- static void mmc_power_up(struct mmc_host *host)
- {
-- int bit = fls(host->ocr_avail) - 1;
-+ int bit;
-+
-+ /* If ocr is set, we use it */
-+ if (host->ocr)
-+ bit = ffs(host->ocr) - 1;
-+ else
-+ bit = fls(host->ocr_avail) - 1;
-
- host->ios.vdd = bit;
- if (mmc_host_is_spi(host)) {
-@@ -947,6 +1173,8 @@ void mmc_stop_host(struct mmc_host *host
- spin_unlock_irqrestore(&host->lock, flags);
- #endif
-
-+ if (host->caps & MMC_CAP_DISABLE)
-+ cancel_delayed_work(&host->disable);
- cancel_delayed_work(&host->detect);
- mmc_flush_scheduled_work();
-
-@@ -958,6 +1186,8 @@ void mmc_stop_host(struct mmc_host *host
- mmc_claim_host(host);
- mmc_detach_bus(host);
- mmc_release_host(host);
-+ mmc_bus_put(host);
-+ return;
- }
- mmc_bus_put(host);
-
-@@ -966,6 +1196,80 @@ void mmc_stop_host(struct mmc_host *host
- mmc_power_off(host);
- }
-
-+void mmc_power_save_host(struct mmc_host *host)
-+{
-+ mmc_bus_get(host);
-+
-+ if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) {
-+ mmc_bus_put(host);
-+ return;
-+ }
-+
-+ if (host->bus_ops->power_save)
-+ host->bus_ops->power_save(host);
-+
-+ mmc_bus_put(host);
-+
-+ mmc_power_off(host);
-+}
-+EXPORT_SYMBOL(mmc_power_save_host);
-+
-+void mmc_power_restore_host(struct mmc_host *host)
-+{
-+ mmc_bus_get(host);
-+
-+ if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) {
-+ mmc_bus_put(host);
-+ return;
-+ }
-+
-+ mmc_power_up(host);
-+ host->bus_ops->power_restore(host);
-+
-+ mmc_bus_put(host);
-+}
-+EXPORT_SYMBOL(mmc_power_restore_host);
-+
-+int mmc_card_awake(struct mmc_host *host)
-+{
-+ int err = -ENOSYS;
-+
-+ mmc_bus_get(host);
-+
-+ if (host->bus_ops && !host->bus_dead && host->bus_ops->awake)
-+ err = host->bus_ops->awake(host);
-+
-+ mmc_bus_put(host);
-+
-+ return err;
-+}
-+EXPORT_SYMBOL(mmc_card_awake);
-+
-+int mmc_card_sleep(struct mmc_host *host)
-+{
-+ int err = -ENOSYS;
-+
-+ mmc_bus_get(host);
-+
-+ if (host->bus_ops && !host->bus_dead && host->bus_ops->awake)
-+ err = host->bus_ops->sleep(host);
-+
-+ mmc_bus_put(host);
-+
-+ return err;
-+}
-+EXPORT_SYMBOL(mmc_card_sleep);
-+
-+int mmc_card_can_sleep(struct mmc_host *host)
-+{
-+ struct mmc_card *card = host->card;
-+
-+ if (card && mmc_card_mmc(card) && card->ext_csd.rev >= 3)
-+ return 1;
-+ return 0;
-+}
-+EXPORT_SYMBOL(mmc_card_can_sleep);
-+
- #ifdef CONFIG_PM
-
- /**
-@@ -975,27 +1279,36 @@ void mmc_stop_host(struct mmc_host *host
- */
- int mmc_suspend_host(struct mmc_host *host, pm_message_t state)
- {
-+ int err = 0;
-+
-+ if (host->caps & MMC_CAP_DISABLE)
-+ cancel_delayed_work(&host->disable);
- cancel_delayed_work(&host->detect);
- mmc_flush_scheduled_work();
-
- mmc_bus_get(host);
- if (host->bus_ops && !host->bus_dead) {
- if (host->bus_ops->suspend)
-- host->bus_ops->suspend(host);
-- if (!host->bus_ops->resume) {
-+ err = host->bus_ops->suspend(host);
-+ if (err == -ENOSYS || !host->bus_ops->resume) {
-+ /*
-+ * We simply "remove" the card in this case.
-+ * It will be redetected on resume.
-+ */
- if (host->bus_ops->remove)
- host->bus_ops->remove(host);
--
- mmc_claim_host(host);
- mmc_detach_bus(host);
- mmc_release_host(host);
-+ err = 0;
- }
- }
- mmc_bus_put(host);
-
-- mmc_power_off(host);
-+ if (!err)
-+ mmc_power_off(host);
-
-- return 0;
-+ return err;
- }
-
- EXPORT_SYMBOL(mmc_suspend_host);
-@@ -1006,12 +1319,26 @@ EXPORT_SYMBOL(mmc_suspend_host);
- */
- int mmc_resume_host(struct mmc_host *host)
- {
-+ int err = 0;
-+
- mmc_bus_get(host);
- if (host->bus_ops && !host->bus_dead) {
- mmc_power_up(host);
- mmc_select_voltage(host, host->ocr);
- BUG_ON(!host->bus_ops->resume);
-- host->bus_ops->resume(host);
-+ err = host->bus_ops->resume(host);
-+ if (err) {
-+ printk(KERN_WARNING "%s: error %d during resume "
-+ "(card was removed?)\n",
-+ mmc_hostname(host), err);
-+ if (host->bus_ops->remove)
-+ host->bus_ops->remove(host);
-+ mmc_claim_host(host);
-+ mmc_detach_bus(host);
-+ mmc_release_host(host);
-+ /* no need to bother upper layers */
-+ err = 0;
-+ }
- }
- mmc_bus_put(host);
-
-@@ -1021,7 +1348,7 @@ int mmc_resume_host(struct mmc_host *hos
- */
- mmc_detect_change(host, 1);
-
-- return 0;
-+ return err;
- }
-
- EXPORT_SYMBOL(mmc_resume_host);
---- a/drivers/mmc/core/core.h
-+++ b/drivers/mmc/core/core.h
-@@ -16,10 +16,14 @@
- #define MMC_CMD_RETRIES 3
-
- struct mmc_bus_ops {
-+ int (*awake)(struct mmc_host *);
-+ int (*sleep)(struct mmc_host *);
- void (*remove)(struct mmc_host *);
- void (*detect)(struct mmc_host *);
-- void (*suspend)(struct mmc_host *);
-- void (*resume)(struct mmc_host *);
-+ int (*suspend)(struct mmc_host *);
-+ int (*resume)(struct mmc_host *);
-+ void (*power_save)(struct mmc_host *);
-+ void (*power_restore)(struct mmc_host *);
- };
-
- void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops);
---- a/drivers/mmc/core/debugfs.c
-+++ b/drivers/mmc/core/debugfs.c
-@@ -240,7 +240,7 @@ static int mmc_ext_csd_release(struct in
- return 0;
- }
-
--static struct file_operations mmc_dbg_ext_csd_fops = {
-+static const struct file_operations mmc_dbg_ext_csd_fops = {
- .open = mmc_ext_csd_open,
- .read = mmc_ext_csd_read,
- .release = mmc_ext_csd_release,
---- a/drivers/mmc/core/host.c
-+++ b/drivers/mmc/core/host.c
-@@ -83,6 +83,7 @@ struct mmc_host *mmc_alloc_host(int extr
- spin_lock_init(&host->lock);
- init_waitqueue_head(&host->wq);
- INIT_DELAYED_WORK(&host->detect, mmc_rescan);
-+ INIT_DELAYED_WORK_DEFERRABLE(&host->disable, mmc_host_deeper_disable);
-
- /*
- * By default, hosts do not support SGIO or large requests.
---- a/drivers/mmc/core/host.h
-+++ b/drivers/mmc/core/host.h
-@@ -14,5 +14,7 @@
- int mmc_register_host_class(void);
- void mmc_unregister_host_class(void);
-
-+void mmc_host_deeper_disable(struct work_struct *work);
-+
- #endif
-
---- a/drivers/mmc/core/mmc.c
-+++ b/drivers/mmc/core/mmc.c
-@@ -160,7 +160,6 @@ static int mmc_read_ext_csd(struct mmc_c
- {
- int err;
- u8 *ext_csd;
-- unsigned int ext_csd_struct;
-
- BUG_ON(!card);
-
-@@ -207,16 +206,16 @@ static int mmc_read_ext_csd(struct mmc_c
- goto out;
- }
-
-- ext_csd_struct = ext_csd[EXT_CSD_REV];
-- if (ext_csd_struct > 3) {
-+ card->ext_csd.rev = ext_csd[EXT_CSD_REV];
-+ if (card->ext_csd.rev > 3) {
- printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
- "version %d\n", mmc_hostname(card->host),
-- ext_csd_struct);
-+ card->ext_csd.rev);
- err = -EINVAL;
- goto out;
- }
-
-- if (ext_csd_struct >= 2) {
-+ if (card->ext_csd.rev >= 2) {
- card->ext_csd.sectors =
- ext_csd[EXT_CSD_SEC_CNT + 0] << 0 |
- ext_csd[EXT_CSD_SEC_CNT + 1] << 8 |
-@@ -241,6 +240,15 @@ static int mmc_read_ext_csd(struct mmc_c
- goto out;
- }
-
-+ if (card->ext_csd.rev >= 3) {
-+ u8 sa_shift = ext_csd[EXT_CSD_S_A_TIMEOUT];
-+
-+ /* Sleep / awake timeout in 100ns units */
-+ if (sa_shift > 0 && sa_shift <= 0x17)
-+ card->ext_csd.sa_timeout =
-+ 1 << ext_csd[EXT_CSD_S_A_TIMEOUT];
-+ }
-+
- out:
- kfree(ext_csd);
-
-@@ -276,7 +284,7 @@ static struct attribute_group mmc_std_at
- .attrs = mmc_std_attrs,
- };
-
--static struct attribute_group *mmc_attr_groups[] = {
-+static const struct attribute_group *mmc_attr_groups[] = {
- &mmc_std_attr_group,
- NULL,
- };
-@@ -408,12 +416,17 @@ static int mmc_init_card(struct mmc_host
- (host->caps & MMC_CAP_MMC_HIGHSPEED)) {
- err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, 1);
-- if (err)
-+ if (err && err != -EBADMSG)
- goto free_card;
-
-- mmc_card_set_highspeed(card);
--
-- mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
-+ if (err) {
-+ printk(KERN_WARNING "%s: switch to highspeed failed\n",
-+ mmc_hostname(card->host));
-+ err = 0;
-+ } else {
-+ mmc_card_set_highspeed(card);
-+ mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
-+ }
- }
-
- /*
-@@ -448,10 +461,17 @@ static int mmc_init_card(struct mmc_host
- err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_BUS_WIDTH, ext_csd_bit);
-
-- if (err)
-+ if (err && err != -EBADMSG)
- goto free_card;
-
-- mmc_set_bus_width(card->host, bus_width);
-+ if (err) {
-+ printk(KERN_WARNING "%s: switch to bus width %d "
-+ "failed\n", mmc_hostname(card->host),
-+ 1 << bus_width);
-+ err = 0;
-+ } else {
-+ mmc_set_bus_width(card->host, bus_width);
-+ }
- }
-
- if (!oldcard)
-@@ -507,12 +527,10 @@ static void mmc_detect(struct mmc_host *
- }
- }
-
--#ifdef CONFIG_MMC_UNSAFE_RESUME
--
- /*
- * Suspend callback from host.
- */
--static void mmc_suspend(struct mmc_host *host)
-+static int mmc_suspend(struct mmc_host *host)
- {
- BUG_ON(!host);
- BUG_ON(!host->card);
-@@ -522,6 +540,8 @@ static void mmc_suspend(struct mmc_host
- mmc_deselect_cards(host);
- host->card->state &= ~MMC_STATE_HIGHSPEED;
- mmc_release_host(host);
-+
-+ return 0;
- }
-
- /*
-@@ -530,7 +550,7 @@ static void mmc_suspend(struct mmc_host
- * This function tries to determine if the same card is still present
- * and, if so, restore all state to it.
- */
--static void mmc_resume(struct mmc_host *host)
-+static int mmc_resume(struct mmc_host *host)
- {
- int err;
-
-@@ -541,30 +561,99 @@ static void mmc_resume(struct mmc_host *
- err = mmc_init_card(host, host->ocr, host->card);
- mmc_release_host(host);
-
-- if (err) {
-- mmc_remove(host);
-+ return err;
-+}
-
-- mmc_claim_host(host);
-- mmc_detach_bus(host);
-- mmc_release_host(host);
-+static void mmc_power_restore(struct mmc_host *host)
-+{
-+ host->card->state &= ~MMC_STATE_HIGHSPEED;
-+ mmc_claim_host(host);
-+ mmc_init_card(host, host->ocr, host->card);
-+ mmc_release_host(host);
-+}
-+
-+static int mmc_sleep(struct mmc_host *host)
-+{
-+ struct mmc_card *card = host->card;
-+ int err = -ENOSYS;
-+
-+ if (card && card->ext_csd.rev >= 3) {
-+ err = mmc_card_sleepawake(host, 1);
-+ if (err < 0)
-+ pr_debug("%s: Error %d while putting card into sleep",
-+ mmc_hostname(host), err);
- }
-
-+ return err;
- }
-
--#else
-+static int mmc_awake(struct mmc_host *host)
-+{
-+ struct mmc_card *card = host->card;
-+ int err = -ENOSYS;
-
--#define mmc_suspend NULL
--#define mmc_resume NULL
-+ if (card && card->ext_csd.rev >= 3) {
-+ err = mmc_card_sleepawake(host, 0);
-+ if (err < 0)
-+ pr_debug("%s: Error %d while awaking sleeping card",
-+ mmc_hostname(host), err);
-+ }
-
--#endif
-+ return err;
-+}
-+
-+#ifdef CONFIG_MMC_UNSAFE_RESUME
-+
-+static const struct mmc_bus_ops mmc_ops = {
-+ .awake = mmc_awake,
-+ .sleep = mmc_sleep,
-+ .remove = mmc_remove,
-+ .detect = mmc_detect,
-+ .suspend = mmc_suspend,
-+ .resume = mmc_resume,
-+ .power_restore = mmc_power_restore,
-+};
-+
-+static void mmc_attach_bus_ops(struct mmc_host *host)
-+{
-+ mmc_attach_bus(host, &mmc_ops);
-+}
-+
-+#else
-
- static const struct mmc_bus_ops mmc_ops = {
-+ .awake = mmc_awake,
-+ .sleep = mmc_sleep,
-+ .remove = mmc_remove,
-+ .detect = mmc_detect,
-+ .suspend = NULL,
-+ .resume = NULL,
-+ .power_restore = mmc_power_restore,
-+};
-+
-+static const struct mmc_bus_ops mmc_ops_unsafe = {
-+ .awake = mmc_awake,
-+ .sleep = mmc_sleep,
- .remove = mmc_remove,
- .detect = mmc_detect,
- .suspend = mmc_suspend,
- .resume = mmc_resume,
-+ .power_restore = mmc_power_restore,
- };
-
-+static void mmc_attach_bus_ops(struct mmc_host *host)
-+{
-+ const struct mmc_bus_ops *bus_ops;
-+
-+ if (host->caps & MMC_CAP_NONREMOVABLE)
-+ bus_ops = &mmc_ops_unsafe;
-+ else
-+ bus_ops = &mmc_ops;
-+ mmc_attach_bus(host, bus_ops);
-+}
-+
-+#endif
-+
- /*
- * Starting point for MMC card init.
- */
-@@ -575,7 +664,7 @@ int mmc_attach_mmc(struct mmc_host *host
- BUG_ON(!host);
- WARN_ON(!host->claimed);
-
-- mmc_attach_bus(host, &mmc_ops);
-+ mmc_attach_bus_ops(host);
-
- /*
- * We need to get OCR a different way for SPI.
---- a/drivers/mmc/core/mmc_ops.c
-+++ b/drivers/mmc/core/mmc_ops.c
-@@ -57,6 +57,42 @@ int mmc_deselect_cards(struct mmc_host *
- return _mmc_select_card(host, NULL);
- }
-
-+int mmc_card_sleepawake(struct mmc_host *host, int sleep)
-+{
-+ struct mmc_command cmd;
-+ struct mmc_card *card = host->card;
-+ int err;
-+
-+ if (sleep)
-+ mmc_deselect_cards(host);
-+
-+ memset(&cmd, 0, sizeof(struct mmc_command));
-+
-+ cmd.opcode = MMC_SLEEP_AWAKE;
-+ cmd.arg = card->rca << 16;
-+ if (sleep)
-+ cmd.arg |= 1 << 15;
-+
-+ cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
-+ err = mmc_wait_for_cmd(host, &cmd, 0);
-+ if (err)
-+ return err;
-+
-+ /*
-+ * If the host does not wait while the card signals busy, then we will
-+ * will have to wait the sleep/awake timeout. Note, we cannot use the
-+ * SEND_STATUS command to poll the status because that command (and most
-+ * others) is invalid while the card sleeps.
-+ */
-+ if (!(host->caps & MMC_CAP_WAIT_WHILE_BUSY))
-+ mmc_delay(DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000));
-+
-+ if (!sleep)
-+ err = mmc_select_card(card);
-+
-+ return err;
-+}
-+
- int mmc_go_idle(struct mmc_host *host)
- {
- int err;
-@@ -354,6 +390,7 @@ int mmc_switch(struct mmc_card *card, u8
- {
- int err;
- struct mmc_command cmd;
-+ u32 status;
-
- BUG_ON(!card);
- BUG_ON(!card->host);
-@@ -371,6 +408,28 @@ int mmc_switch(struct mmc_card *card, u8
- if (err)
- return err;
-
-+ /* Must check status to be sure of no errors */
-+ do {
-+ err = mmc_send_status(card, &status);
-+ if (err)
-+ return err;
-+ if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
-+ break;
-+ if (mmc_host_is_spi(card->host))
-+ break;
-+ } while (R1_CURRENT_STATE(status) == 7);
-+
-+ if (mmc_host_is_spi(card->host)) {
-+ if (status & R1_SPI_ILLEGAL_COMMAND)
-+ return -EBADMSG;
-+ } else {
-+ if (status & 0xFDFFA000)
-+ printk(KERN_WARNING "%s: unexpected status %#x after "
-+ "switch", mmc_hostname(card->host), status);
-+ if (status & R1_SWITCH_ERROR)
-+ return -EBADMSG;
-+ }
-+
- return 0;
- }
-
---- a/drivers/mmc/core/mmc_ops.h
-+++ b/drivers/mmc/core/mmc_ops.h
-@@ -25,6 +25,7 @@ int mmc_send_status(struct mmc_card *car
- int mmc_send_cid(struct mmc_host *host, u32 *cid);
- int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp);
- int mmc_spi_set_crc(struct mmc_host *host, int use_crc);
-+int mmc_card_sleepawake(struct mmc_host *host, int sleep);
-
- #endif
-
---- a/drivers/mmc/core/sd.c
-+++ b/drivers/mmc/core/sd.c
-@@ -314,7 +314,7 @@ static struct attribute_group sd_std_att
- .attrs = sd_std_attrs,
- };
-
--static struct attribute_group *sd_attr_groups[] = {
-+static const struct attribute_group *sd_attr_groups[] = {
- &sd_std_attr_group,
- NULL,
- };
-@@ -561,12 +561,10 @@ static void mmc_sd_detect(struct mmc_hos
- }
- }
-
--#ifdef CONFIG_MMC_UNSAFE_RESUME
--
- /*
- * Suspend callback from host.
- */
--static void mmc_sd_suspend(struct mmc_host *host)
-+static int mmc_sd_suspend(struct mmc_host *host)
- {
- BUG_ON(!host);
- BUG_ON(!host->card);
-@@ -576,6 +574,8 @@ static void mmc_sd_suspend(struct mmc_ho
- mmc_deselect_cards(host);
- host->card->state &= ~MMC_STATE_HIGHSPEED;
- mmc_release_host(host);
-+
-+ return 0;
- }
-
- /*
-@@ -584,7 +584,7 @@ static void mmc_sd_suspend(struct mmc_ho
- * This function tries to determine if the same card is still present
- * and, if so, restore all state to it.
- */
--static void mmc_sd_resume(struct mmc_host *host)
-+static int mmc_sd_resume(struct mmc_host *host)
- {
- int err;
-
-@@ -595,30 +595,63 @@ static void mmc_sd_resume(struct mmc_hos
- err = mmc_sd_init_card(host, host->ocr, host->card);
- mmc_release_host(host);
-
-- if (err) {
-- mmc_sd_remove(host);
--
-- mmc_claim_host(host);
-- mmc_detach_bus(host);
-- mmc_release_host(host);
-- }
-+ return err;
-+}
-
-+static void mmc_sd_power_restore(struct mmc_host *host)
-+{
-+ host->card->state &= ~MMC_STATE_HIGHSPEED;
-+ mmc_claim_host(host);
-+ mmc_sd_init_card(host, host->ocr, host->card);
-+ mmc_release_host(host);
- }
-
--#else
-+#ifdef CONFIG_MMC_UNSAFE_RESUME
-
--#define mmc_sd_suspend NULL
--#define mmc_sd_resume NULL
-+static const struct mmc_bus_ops mmc_sd_ops = {
-+ .remove = mmc_sd_remove,
-+ .detect = mmc_sd_detect,
-+ .suspend = mmc_sd_suspend,
-+ .resume = mmc_sd_resume,
-+ .power_restore = mmc_sd_power_restore,
-+};
-
--#endif
-+static void mmc_sd_attach_bus_ops(struct mmc_host *host)
-+{
-+ mmc_attach_bus(host, &mmc_sd_ops);
-+}
-+
-+#else
-
- static const struct mmc_bus_ops mmc_sd_ops = {
- .remove = mmc_sd_remove,
- .detect = mmc_sd_detect,
-+ .suspend = NULL,
-+ .resume = NULL,
-+ .power_restore = mmc_sd_power_restore,
-+};
-+
-+static const struct mmc_bus_ops mmc_sd_ops_unsafe = {
-+ .remove = mmc_sd_remove,
-+ .detect = mmc_sd_detect,
- .suspend = mmc_sd_suspend,
- .resume = mmc_sd_resume,
-+ .power_restore = mmc_sd_power_restore,
- };
-
-+static void mmc_sd_attach_bus_ops(struct mmc_host *host)
-+{
-+ const struct mmc_bus_ops *bus_ops;
-+
-+ if (host->caps & MMC_CAP_NONREMOVABLE)
-+ bus_ops = &mmc_sd_ops_unsafe;
-+ else
-+ bus_ops = &mmc_sd_ops;
-+ mmc_attach_bus(host, bus_ops);
-+}
-+
-+#endif
-+
- /*
- * Starting point for SD card init.
- */
-@@ -629,7 +662,7 @@ int mmc_attach_sd(struct mmc_host *host,
- BUG_ON(!host);
- WARN_ON(!host->claimed);
-
-- mmc_attach_bus(host, &mmc_sd_ops);
-+ mmc_sd_attach_bus_ops(host);
-
- /*
- * We need to get OCR a different way for SPI.
---- a/drivers/mmc/core/sdio_bus.c
-+++ b/drivers/mmc/core/sdio_bus.c
-@@ -20,9 +20,6 @@
- #include "sdio_cis.h"
- #include "sdio_bus.h"
-
--#define dev_to_sdio_func(d) container_of(d, struct sdio_func, dev)
--#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv)
--
- /* show configuration fields */
- #define sdio_config_attr(field, format_string) \
- static ssize_t \
-@@ -251,12 +248,15 @@ int sdio_add_func(struct sdio_func *func
- /*
- * Unregister a SDIO function with the driver model, and
- * (eventually) free it.
-+ * This function can be called through error paths where sdio_add_func() was
-+ * never executed (because a failure occurred at an earlier point).
- */
- void sdio_remove_func(struct sdio_func *func)
- {
-- if (sdio_func_present(func))
-- device_del(&func->dev);
-+ if (!sdio_func_present(func))
-+ return;
-
-+ device_del(&func->dev);
- put_device(&func->dev);
- }
-
---- a/drivers/mmc/core/sdio.c
-+++ b/drivers/mmc/core/sdio.c
-@@ -165,6 +165,29 @@ static int sdio_enable_wide(struct mmc_c
- }
-
- /*
-+ * If desired, disconnect the pull-up resistor on CD/DAT[3] (pin 1)
-+ * of the card. This may be required on certain setups of boards,
-+ * controllers and embedded sdio device which do not need the card's
-+ * pull-up. As a result, card detection is disabled and power is saved.
-+ */
-+static int sdio_disable_cd(struct mmc_card *card)
-+{
-+ int ret;
-+ u8 ctrl;
-+
-+ if (!card->cccr.disable_cd)
-+ return 0;
-+
-+ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
-+ if (ret)
-+ return ret;
-+
-+ ctrl |= SDIO_BUS_CD_DISABLE;
-+
-+ return mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
-+}
-+
-+/*
- * Test if the card supports high-speed mode and, if so, switch to it.
- */
- static int sdio_enable_hs(struct mmc_card *card)
-@@ -195,6 +218,135 @@ static int sdio_enable_hs(struct mmc_car
- }
-
- /*
-+ * Handle the detection and initialisation of a card.
-+ *
-+ * In the case of a resume, "oldcard" will contain the card
-+ * we're trying to reinitialise.
-+ */
-+static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
-+ struct mmc_card *oldcard)
-+{
-+ struct mmc_card *card;
-+ int err;
-+
-+ BUG_ON(!host);
-+ WARN_ON(!host->claimed);
-+
-+ /*
-+ * Inform the card of the voltage
-+ */
-+ err = mmc_send_io_op_cond(host, host->ocr, &ocr);
-+ if (err)
-+ goto err;
-+
-+ /*
-+ * For SPI, enable CRC as appropriate.
-+ */
-+ if (mmc_host_is_spi(host)) {
-+ err = mmc_spi_set_crc(host, use_spi_crc);
-+ if (err)
-+ goto err;
-+ }
-+
-+ /*
-+ * Allocate card structure.
-+ */
-+ card = mmc_alloc_card(host, NULL);
-+ if (IS_ERR(card)) {
-+ err = PTR_ERR(card);
-+ goto err;
-+ }
-+
-+ card->type = MMC_TYPE_SDIO;
-+
-+ /*
-+ * For native busses: set card RCA and quit open drain mode.
-+ */
-+ if (!mmc_host_is_spi(host)) {
-+ err = mmc_send_relative_addr(host, &card->rca);
-+ if (err)
-+ goto remove;
-+
-+ mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
-+ }
-+
-+ /*
-+ * Select card, as all following commands rely on that.
-+ */
-+ if (!mmc_host_is_spi(host)) {
-+ err = mmc_select_card(card);
-+ if (err)
-+ goto remove;
-+ }
-+
-+ /*
-+ * Read the common registers.
-+ */
-+ err = sdio_read_cccr(card);
-+ if (err)
-+ goto remove;
-+
-+ /*
-+ * Read the common CIS tuples.
-+ */
-+ err = sdio_read_common_cis(card);
-+ if (err)
-+ goto remove;
-+
-+ if (oldcard) {
-+ int same = (card->cis.vendor == oldcard->cis.vendor &&
-+ card->cis.device == oldcard->cis.device);
-+ mmc_remove_card(card);
-+ if (!same) {
-+ err = -ENOENT;
-+ goto err;
-+ }
-+ card = oldcard;
-+ return 0;
-+ }
-+
-+ /*
-+ * Switch to high-speed (if supported).
-+ */
-+ err = sdio_enable_hs(card);
-+ if (err)
-+ goto remove;
-+
-+ /*
-+ * Change to the card's maximum speed.
-+ */
-+ if (mmc_card_highspeed(card)) {
-+ /*
-+ * The SDIO specification doesn't mention how
-+ * the CIS transfer speed register relates to
-+ * high-speed, but it seems that 50 MHz is
-+ * mandatory.
-+ */
-+ mmc_set_clock(host, 50000000);
-+ } else {
-+ mmc_set_clock(host, card->cis.max_dtr);
-+ }
-+
-+ /*
-+ * Switch to wider bus (if supported).
-+ */
-+ err = sdio_enable_wide(card);
-+ if (err)
-+ goto remove;
-+
-+ if (!oldcard)
-+ host->card = card;
-+ return 0;
-+
-+remove:
-+ if (!oldcard)
-+ mmc_remove_card(card);
-+
-+err:
-+ return err;
-+}
-+
-+/*
- * Host is being removed. Free up the current card.
- */
- static void mmc_sdio_remove(struct mmc_host *host)
-@@ -243,10 +395,77 @@ static void mmc_sdio_detect(struct mmc_h
- }
- }
-
-+/*
-+ * SDIO suspend. We need to suspend all functions separately.
-+ * Therefore all registered functions must have drivers with suspend
-+ * and resume methods. Failing that we simply remove the whole card.
-+ */
-+static int mmc_sdio_suspend(struct mmc_host *host)
-+{
-+ int i, err = 0;
-+
-+ for (i = 0; i < host->card->sdio_funcs; i++) {
-+ struct sdio_func *func = host->card->sdio_func[i];
-+ if (func && sdio_func_present(func) && func->dev.driver) {
-+ const struct dev_pm_ops *pmops = func->dev.driver->pm;
-+ if (!pmops || !pmops->suspend || !pmops->resume) {
-+ /* force removal of entire card in that case */
-+ err = -ENOSYS;
-+ } else
-+ err = pmops->suspend(&func->dev);
-+ if (err)
-+ break;
-+ }
-+ }
-+ while (err && --i >= 0) {
-+ struct sdio_func *func = host->card->sdio_func[i];
-+ if (func && sdio_func_present(func) && func->dev.driver) {
-+ const struct dev_pm_ops *pmops = func->dev.driver->pm;
-+ pmops->resume(&func->dev);
-+ }
-+ }
-+
-+ return err;
-+}
-+
-+static int mmc_sdio_resume(struct mmc_host *host)
-+{
-+ int i, err;
-+
-+ BUG_ON(!host);
-+ BUG_ON(!host->card);
-+
-+ /* Basic card reinitialization. */
-+ mmc_claim_host(host);
-+ err = mmc_sdio_init_card(host, host->ocr, host->card);
-+ mmc_release_host(host);
-+
-+ /*
-+ * If the card looked to be the same as before suspending, then
-+ * we proceed to resume all card functions. If one of them returns
-+ * an error then we simply return that error to the core and the
-+ * card will be redetected as new. It is the responsibility of
-+ * the function driver to perform further tests with the extra
-+ * knowledge it has of the card to confirm the card is indeed the
-+ * same as before suspending (same MAC address for network cards,
-+ * etc.) and return an error otherwise.
-+ */
-+ for (i = 0; !err && i < host->card->sdio_funcs; i++) {
-+ struct sdio_func *func = host->card->sdio_func[i];
-+ if (func && sdio_func_present(func) && func->dev.driver) {
-+ const struct dev_pm_ops *pmops = func->dev.driver->pm;
-+ err = pmops->resume(&func->dev);
-+ }
-+ }
-+
-+ return err;
-+}
-
- static const struct mmc_bus_ops mmc_sdio_ops = {
- .remove = mmc_sdio_remove,
- .detect = mmc_sdio_detect,
-+ .suspend = mmc_sdio_suspend,
-+ .resume = mmc_sdio_resume,
- };
-
-
-@@ -275,13 +494,6 @@ int mmc_attach_sdio(struct mmc_host *hos
- ocr &= ~0x7F;
- }
-
-- if (ocr & MMC_VDD_165_195) {
-- printk(KERN_WARNING "%s: SDIO card claims to support the "
-- "incompletely defined 'low voltage range'. This "
-- "will be ignored.\n", mmc_hostname(host));
-- ocr &= ~MMC_VDD_165_195;
-- }
--
- host->ocr = mmc_select_voltage(host, ocr);
-
- /*
-@@ -293,108 +505,31 @@ int mmc_attach_sdio(struct mmc_host *hos
- }
-
- /*
-- * Inform the card of the voltage
-+ * Detect and init the card.
- */
-- err = mmc_send_io_op_cond(host, host->ocr, &ocr);
-+ err = mmc_sdio_init_card(host, host->ocr, NULL);
- if (err)
- goto err;
--
-- /*
-- * For SPI, enable CRC as appropriate.
-- */
-- if (mmc_host_is_spi(host)) {
-- err = mmc_spi_set_crc(host, use_spi_crc);
-- if (err)
-- goto err;
-- }
-+ card = host->card;
-
- /*
- * The number of functions on the card is encoded inside
- * the ocr.
- */
- funcs = (ocr & 0x70000000) >> 28;
-+ card->sdio_funcs = 0;
-
- /*
-- * Allocate card structure.
-- */
-- card = mmc_alloc_card(host, NULL);
-- if (IS_ERR(card)) {
-- err = PTR_ERR(card);
-- goto err;
-- }
--
-- card->type = MMC_TYPE_SDIO;
-- card->sdio_funcs = funcs;
--
-- host->card = card;
--
-- /*
-- * For native busses: set card RCA and quit open drain mode.
-+ * If needed, disconnect card detection pull-up resistor.
- */
-- if (!mmc_host_is_spi(host)) {
-- err = mmc_send_relative_addr(host, &card->rca);
-- if (err)
-- goto remove;
--
-- mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
-- }
--
-- /*
-- * Select card, as all following commands rely on that.
-- */
-- if (!mmc_host_is_spi(host)) {
-- err = mmc_select_card(card);
-- if (err)
-- goto remove;
-- }
--
-- /*
-- * Read the common registers.
-- */
-- err = sdio_read_cccr(card);
-- if (err)
-- goto remove;
--
-- /*
-- * Read the common CIS tuples.
-- */
-- err = sdio_read_common_cis(card);
-- if (err)
-- goto remove;
--
-- /*
-- * Switch to high-speed (if supported).
-- */
-- err = sdio_enable_hs(card);
-- if (err)
-- goto remove;
--
-- /*
-- * Change to the card's maximum speed.
-- */
-- if (mmc_card_highspeed(card)) {
-- /*
-- * The SDIO specification doesn't mention how
-- * the CIS transfer speed register relates to
-- * high-speed, but it seems that 50 MHz is
-- * mandatory.
-- */
-- mmc_set_clock(host, 50000000);
-- } else {
-- mmc_set_clock(host, card->cis.max_dtr);
-- }
--
-- /*
-- * Switch to wider bus (if supported).
-- */
-- err = sdio_enable_wide(card);
-+ err = sdio_disable_cd(card);
- if (err)
- goto remove;
-
- /*
- * Initialize (but don't add) all present functions.
- */
-- for (i = 0;i < funcs;i++) {
-+ for (i = 0; i < funcs; i++, card->sdio_funcs++) {
- err = sdio_init_func(host->card, i + 1);
- if (err)
- goto remove;
---- a/drivers/mmc/core/sdio_cis.c
-+++ b/drivers/mmc/core/sdio_cis.c
-@@ -29,6 +29,8 @@ static int cistpl_vers_1(struct mmc_card
- unsigned i, nr_strings;
- char **buffer, *string;
-
-+ /* Find all null-terminated (including zero length) strings in
-+ the TPLLV1_INFO field. Trailing garbage is ignored. */
- buf += 2;
- size -= 2;
-
-@@ -39,11 +41,8 @@ static int cistpl_vers_1(struct mmc_card
- if (buf[i] == 0)
- nr_strings++;
- }
--
-- if (buf[i-1] != '\0') {
-- printk(KERN_WARNING "SDIO: ignoring broken CISTPL_VERS_1\n");
-+ if (nr_strings == 0)
- return 0;
-- }
-
- size = i;
-
-@@ -98,6 +97,22 @@ static const unsigned char speed_val[16]
- static const unsigned int speed_unit[8] =
- { 10000, 100000, 1000000, 10000000, 0, 0, 0, 0 };
-
-+/* FUNCE tuples with these types get passed to SDIO drivers */
-+static const unsigned char funce_type_whitelist[] = {
-+ 4 /* CISTPL_FUNCE_LAN_NODE_ID used in Broadcom cards */
-+};
-+
-+static int cistpl_funce_whitelisted(unsigned char type)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(funce_type_whitelist); i++) {
-+ if (funce_type_whitelist[i] == type)
-+ return 1;
-+ }
-+ return 0;
-+}
-+
- static int cistpl_funce_common(struct mmc_card *card,
- const unsigned char *buf, unsigned size)
- {
-@@ -120,6 +135,10 @@ static int cistpl_funce_func(struct sdio
- unsigned vsn;
- unsigned min_size;
-
-+ /* let SDIO drivers take care of whitelisted FUNCE tuples */
-+ if (cistpl_funce_whitelisted(buf[0]))
-+ return -EILSEQ;
-+
- vsn = func->card->cccr.sdio_vsn;
- min_size = (vsn == SDIO_SDIO_REV_1_00) ? 28 : 42;
-
-@@ -154,13 +173,12 @@ static int cistpl_funce(struct mmc_card
- else
- ret = cistpl_funce_common(card, buf, size);
-
-- if (ret) {
-+ if (ret && ret != -EILSEQ) {
- printk(KERN_ERR "%s: bad CISTPL_FUNCE size %u "
- "type %u\n", mmc_hostname(card->host), size, buf[0]);
-- return ret;
- }
-
-- return 0;
-+ return ret;
- }
-
- typedef int (tpl_parse_t)(struct mmc_card *, struct sdio_func *,
-@@ -253,21 +271,12 @@ static int sdio_read_cis(struct mmc_card
- for (i = 0; i < ARRAY_SIZE(cis_tpl_list); i++)
- if (cis_tpl_list[i].code == tpl_code)
- break;
-- if (i >= ARRAY_SIZE(cis_tpl_list)) {
-- /* this tuple is unknown to the core */
-- this->next = NULL;
-- this->code = tpl_code;
-- this->size = tpl_link;
-- *prev = this;
-- prev = &this->next;
-- printk(KERN_DEBUG
-- "%s: queuing CIS tuple 0x%02x length %u\n",
-- mmc_hostname(card->host), tpl_code, tpl_link);
-- } else {
-+ if (i < ARRAY_SIZE(cis_tpl_list)) {
- const struct cis_tpl *tpl = cis_tpl_list + i;
- if (tpl_link < tpl->min_size) {
- printk(KERN_ERR
-- "%s: bad CIS tuple 0x%02x (length = %u, expected >= %u)\n",
-+ "%s: bad CIS tuple 0x%02x"
-+ " (length = %u, expected >= %u)\n",
- mmc_hostname(card->host),
- tpl_code, tpl_link, tpl->min_size);
- ret = -EINVAL;
-@@ -275,7 +284,30 @@ static int sdio_read_cis(struct mmc_card
- ret = tpl->parse(card, func,
- this->data, tpl_link);
- }
-- kfree(this);
-+ /*
-+ * We don't need the tuple anymore if it was
-+ * successfully parsed by the SDIO core or if it is
-+ * not going to be parsed by SDIO drivers.
-+ */
-+ if (!ret || ret != -EILSEQ)
-+ kfree(this);
-+ } else {
-+ /* unknown tuple */
-+ ret = -EILSEQ;
-+ }
-+
-+ if (ret == -EILSEQ) {
-+ /* this tuple is unknown to the core or whitelisted */
-+ this->next = NULL;
-+ this->code = tpl_code;
-+ this->size = tpl_link;
-+ *prev = this;
-+ prev = &this->next;
-+ printk(KERN_DEBUG
-+ "%s: queuing CIS tuple 0x%02x length %u\n",
-+ mmc_hostname(card->host), tpl_code, tpl_link);
-+ /* keep on analyzing tuples */
-+ ret = 0;
- }
-
- ptr += tpl_link;
---- a/drivers/mmc/core/sdio_io.c
-+++ b/drivers/mmc/core/sdio_io.c
-@@ -624,7 +624,7 @@ void sdio_f0_writeb(struct sdio_func *fu
-
- BUG_ON(!func);
-
-- if (addr < 0xF0 || addr > 0xFF) {
-+ if ((addr < 0xF0 || addr > 0xFF) && (!mmc_card_lenient_fn0(func->card))) {
- if (err_ret)
- *err_ret = -EINVAL;
- return;
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -55,6 +55,17 @@ config MMC_SDHCI_PCI
-
- If unsure, say N.
-
-+config MMC_SDHCI_CNS3XXX
-+ tristate "SDHCI support on CNS3XXX"
-+ depends on MMC_SDHCI && ARCH_CNS3XXX
-+ help
-+ This selects the Secure Digital Host Controller Interface (SDHCI)
-+ in Cavium Networks CNS3XXX SOCs.
-+
-+ If you have a controller with this interface, say Y or M here.
-+
-+ If unsure, say N.
-+
- config MMC_RICOH_MMC
- tristate "Ricoh MMC Controller Disabler (EXPERIMENTAL)"
- depends on MMC_SDHCI_PCI
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MMC_IMX) += imxmmc.o
- obj-$(CONFIG_MMC_MXC) += mxcmmc.o
- obj-$(CONFIG_MMC_SDHCI) += sdhci.o
- obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
-+obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
- obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o
- obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
- obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
---- a/drivers/mmc/host/sdhci.c
-+++ b/drivers/mmc/host/sdhci.c
-@@ -27,6 +27,15 @@
-
- #define DRIVER_NAME "sdhci"
-
-+#define SDHCI_DEBUG
-+#undef SDHCI_DEBUG
-+
-+#ifdef SDHCI_DEBUG
-+#define sd_printk(x...) printk(x)
-+#else
-+#define sd_printk(x...) do { } while(0)
-+#endif
-+
- #define DBG(f, x...) \
- pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
-
-@@ -43,6 +52,39 @@ static void sdhci_finish_data(struct sdh
- static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
- static void sdhci_finish_command(struct sdhci_host *);
-
-+static void sdhci_dumpallregs(struct sdhci_host *host)
-+{
-+#ifdef SDHCI_DEBUG
-+ printk(" _______________________________________________\n");
-+
-+ printk(" 0x00: 0x%08x | 0x04: 0x%08x\n", sdhci_readl(host, 0x00), sdhci_readl(host, 0x04));
-+ printk(" 0x08: 0x%08x | 0x0C: 0x%08x\n", sdhci_readl(host, 0x08), sdhci_readl(host, 0x0C));
-+ printk(" 0x10: 0x%08x | 0x14: 0x%08x\n", sdhci_readl(host, 0x10), sdhci_readl(host, 0x14));
-+ printk(" 0x18: 0x%08x | 0x1C: 0x%08x\n", sdhci_readl(host, 0x18), sdhci_readl(host, 0x1C));
-+ printk(" -----------------| 0x24: 0x%08x\n", sdhci_readl(host, 0x24));
-+ printk(" 0x28: 0x%08x | 0x2C: 0x%08x\n", sdhci_readl(host, 0x28), sdhci_readl(host, 0x2C));
-+ printk(" 0x30: 0x%08x | 0x34: 0x%08x\n", sdhci_readl(host, 0x30), sdhci_readl(host, 0x34));
-+ printk(" 0x38: 0x%08x | 0x3C: 0x%08x\n", sdhci_readl(host, 0x38), sdhci_readl(host, 0x3C));
-+ printk(" 0x40: 0x%08x | 0x44: 0x%08x\n", sdhci_readl(host, 0x40), sdhci_readl(host, 0x44));
-+ printk(" 0x48: 0x%08x | 0x4C: 0x%08x\n", sdhci_readl(host, 0x48), sdhci_readl(host, 0x4C));
-+ printk(" 0x50: 0x%08x | 0xFC: 0x%08x\n", sdhci_readl(host, 0x50), sdhci_readl(host, 0xFC));
-+//#else
-+ printk(KERN_DEBUG " _______________________________________________\n");
-+
-+ printk(KERN_DEBUG " 0x00: 0x%08x | 0x04: 0x%08x\n", sdhci_readl(host, 0x00), sdhci_readl(host, 0x04));
-+ printk(KERN_DEBUG " 0x08: 0x%08x | 0x0C: 0x%08x\n", sdhci_readl(host, 0x08), sdhci_readl(host, 0x0C));
-+ printk(KERN_DEBUG " 0x10: 0x%08x | 0x14: 0x%08x\n", sdhci_readl(host, 0x10), sdhci_readl(host, 0x14));
-+ printk(KERN_DEBUG " 0x18: 0x%08x | 0x1C: 0x%08x\n", sdhci_readl(host, 0x18), sdhci_readl(host, 0x1C));
-+ printk(KERN_DEBUG " -----------------| 0x24: 0x%08x\n", sdhci_readl(host, 0x24));
-+ printk(KERN_DEBUG " 0x28: 0x%08x | 0x2C: 0x%08x\n", sdhci_readl(host, 0x28), sdhci_readl(host, 0x2C));
-+ printk(KERN_DEBUG " 0x30: 0x%08x | 0x34: 0x%08x\n", sdhci_readl(host, 0x30), sdhci_readl(host, 0x34));
-+ printk(KERN_DEBUG " 0x38: 0x%08x | 0x3C: 0x%08x\n", sdhci_readl(host, 0x38), sdhci_readl(host, 0x3C));
-+ printk(KERN_DEBUG " 0x40: 0x%08x | 0x44: 0x%08x\n", sdhci_readl(host, 0x40), sdhci_readl(host, 0x44));
-+ printk(KERN_DEBUG " 0x48: 0x%08x | 0x4C: 0x%08x\n", sdhci_readl(host, 0x48), sdhci_readl(host, 0x4C));
-+ printk(KERN_DEBUG " 0x50: 0x%08x | 0xFC: 0x%08x\n", sdhci_readl(host, 0x50), sdhci_readl(host, 0xFC));
-+#endif
-+}
-+
- static void sdhci_dumpregs(struct sdhci_host *host)
- {
- printk(KERN_DEBUG DRIVER_NAME ": ============== REGISTER DUMP ==============\n");
-@@ -591,6 +633,9 @@ static u8 sdhci_calc_timeout(struct sdhc
- target_timeout = data->timeout_ns / 1000 +
- data->timeout_clks / host->clock;
-
-+ if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
-+ host->timeout_clk = host->clock / 1000;
-+
- /*
- * Figure out needed cycles.
- * We do this in steps in order to fit inside a 32 bit int.
-@@ -622,7 +667,7 @@ static u8 sdhci_calc_timeout(struct sdhc
- static void sdhci_set_transfer_irqs(struct sdhci_host *host)
- {
- u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
-- u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
-+ u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ACMD12ERR | SDHCI_INT_ADMA_ERROR;
-
- if (host->flags & SDHCI_REQ_USE_DMA)
- sdhci_clear_set_irqs(host, pio_irqs, dma_irqs);
-@@ -652,7 +697,7 @@ static void sdhci_prepare_data(struct sd
- count = sdhci_calc_timeout(host, data);
- sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
-
-- if (host->flags & SDHCI_USE_DMA)
-+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
- host->flags |= SDHCI_REQ_USE_DMA;
-
- /*
-@@ -736,11 +781,21 @@ static void sdhci_prepare_data(struct sd
- } else {
- int sg_cnt;
-
-+ sd_printk("[SDHCI_DEBUG] dma_map_sg(), mmc_dev(host->mmc) = %p \n", mmc_dev(host->mmc));
-+ sd_printk("[SDHCI_DEBUG] dma_map_sg(), data->sg = %p \n", data->sg);
-+ sd_printk("[SDHCI_DEBUG] dma_map_sg(), data->sg_len = %d \n", data->sg_len);
- sg_cnt = dma_map_sg(mmc_dev(host->mmc),
- data->sg, data->sg_len,
- (data->flags & MMC_DATA_READ) ?
- DMA_FROM_DEVICE :
- DMA_TO_DEVICE);
-+ if (data->sg == NULL) {
-+ sd_printk("[SDHCI_DEBUG] dma_map_sg(), data->sg = (NULL) \n");
-+ return;
-+ }
-+ sd_printk("[SDHCI_DEBUG] dma_map_sg(), data->sg = %p \n", data->sg);
-+ sd_printk("[SDHCI_DEBUG] dma_map_sg(), sg_cnt = %d \n", sg_cnt);
-+
- if (sg_cnt == 0) {
- /*
- * This only happens when someone fed
-@@ -750,6 +805,7 @@ static void sdhci_prepare_data(struct sd
- host->flags &= ~SDHCI_REQ_USE_DMA;
- } else {
- WARN_ON(sg_cnt != 1);
-+ sd_printk("[SDHCI_DEBUG] sg_dma_address() => %08x \n", sg_dma_address(data->sg));
- sdhci_writel(host, sg_dma_address(data->sg),
- SDHCI_DMA_ADDRESS);
- }
-@@ -763,14 +819,32 @@ static void sdhci_prepare_data(struct sd
- */
- if (host->version >= SDHCI_SPEC_200) {
- ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
-+#ifdef SDHCI_USE_LEDS_CLASS
-+ ctrl |= SDHCI_CTRL_LED;
-+#else
-+ ctrl &= ~SDHCI_CTRL_LED;
-+#endif
- ctrl &= ~SDHCI_CTRL_DMA_MASK;
- if ((host->flags & SDHCI_REQ_USE_DMA) &&
- (host->flags & SDHCI_USE_ADMA))
- ctrl |= SDHCI_CTRL_ADMA32;
- else
- ctrl |= SDHCI_CTRL_SDMA;
-+
- sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
-- }
-+ } else if (host->version == SDHCI_SPEC_100) {
-+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
-+#ifdef SDHCI_USE_LEDS_CLASS
-+ ctrl |= SDHCI_CTRL_LED;
-+#else
-+ ctrl &= ~SDHCI_CTRL_LED;
-+#endif
-+ ctrl &= ~SDHCI_CTRL_DMA_MASK;
-+ if (host->flags & SDHCI_REQ_USE_DMA)
-+ ctrl |= SDHCI_CTRL_SDMA;
-+
-+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
-+ }
-
- if (!(host->flags & SDHCI_REQ_USE_DMA)) {
- int flags;
-@@ -795,15 +869,26 @@ static void sdhci_set_transfer_mode(stru
- struct mmc_data *data)
- {
- u16 mode;
-+ u8 bgctrl;
-
- if (data == NULL)
- return;
-
- WARN_ON(!host->data);
-
-+ bgctrl = sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL);
-+ if (host->quirks & SDHCI_QUIRK_READ_WAIT_CTRL)
-+ bgctrl |= SDHCI_READ_WAIT_CTRL;
-+ sdhci_writeb(host, bgctrl, SDHCI_BLOCK_GAP_CONTROL);
-+
- mode = SDHCI_TRNS_BLK_CNT_EN;
-- if (data->blocks > 1)
-+
-+ if (data->blocks > 1) {
- mode |= SDHCI_TRNS_MULTI;
-+
-+ if (host->quirks & SDHCI_QUIRK_AUTO_CMD12)
-+ mode |= SDHCI_TRNS_ACMD12;
-+ }
- if (data->flags & MMC_DATA_READ)
- mode |= SDHCI_TRNS_READ;
- if (host->flags & SDHCI_REQ_USE_DMA)
-@@ -812,6 +897,20 @@ static void sdhci_set_transfer_mode(stru
- sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
- }
-
-+static void shdci_check_dma_overrun(struct sdhci_host *host, struct mmc_data *data)
-+{
-+ u32 dma_pos = sdhci_readl(host, SDHCI_DMA_ADDRESS);
-+ u32 dma_start = sg_dma_address(data->sg);
-+ u32 dma_end = dma_start + data->sg->length;
-+
-+ /* Test whether we ended up moving more data than was originally requested. */
-+ if (dma_pos <= dma_end)
-+ return;
-+
-+ printk(KERN_ERR "%s: dma overrun, dma %08x, req %08x..%08x\n",
-+ mmc_hostname(host->mmc), dma_pos, dma_start, dma_end);
-+}
-+
- static void sdhci_finish_data(struct sdhci_host *host)
- {
- struct mmc_data *data;
-@@ -825,6 +924,9 @@ static void sdhci_finish_data(struct sdh
- if (host->flags & SDHCI_USE_ADMA)
- sdhci_adma_table_post(host, data);
- else {
-+ shdci_check_dma_overrun(host, data);
-+
-+ sd_printk("[SDHCI_DEBUG] dma_unmap_sg(), data->sg_len = %d \n", data->sg_len);
- dma_unmap_sg(mmc_dev(host->mmc), data->sg,
- data->sg_len, (data->flags & MMC_DATA_READ) ?
- DMA_FROM_DEVICE : DMA_TO_DEVICE);
-@@ -866,12 +968,16 @@ static void sdhci_send_command(struct sd
-
- WARN_ON(host->cmd);
-
-+ sd_printk("[SDHCI_DEBUG] sdhci_send_command() \n");
-+
- /* Wait max 10 ms */
- timeout = 10;
-
- mask = SDHCI_CMD_INHIBIT;
- if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
- mask |= SDHCI_DATA_INHIBIT;
-+ if ((cmd->data != NULL))
-+ mask |= SDHCI_DATA_INHIBIT;
-
- /* We shouldn't wait for data inihibit for stop commands, even
- though they might use busy signaling */
-@@ -925,7 +1031,11 @@ static void sdhci_send_command(struct sd
- if (cmd->data)
- flags |= SDHCI_CMD_DATA;
-
-+ sd_printk("[SDHCI_DEBUG] sdhci_send_command() => %08x \n", SDHCI_MAKE_CMD(cmd->opcode, flags));
-+ sdhci_dumpallregs(host);
- sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
-+ sd_printk("[SDHCI_DEBUG] sdhci_send_command(): After issue command \n");
-+ sdhci_dumpallregs(host);
- }
-
- static void sdhci_finish_command(struct sdhci_host *host)
-@@ -934,6 +1044,8 @@ static void sdhci_finish_command(struct
-
- BUG_ON(host->cmd == NULL);
-
-+ sd_printk("[SDHCI_DEBUG] sdhci_finish_command() \n");
-+
- if (host->cmd->flags & MMC_RSP_PRESENT) {
- if (host->cmd->flags & MMC_RSP_136) {
- /* CRC is stripped so we need to do some shifting. */
-@@ -991,8 +1103,8 @@ static void sdhci_set_clock(struct sdhci
- clk |= SDHCI_CLOCK_INT_EN;
- sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
-
-- /* Wait max 10 ms */
-- timeout = 10;
-+ /* Wait max 20 ms */
-+ timeout = 20;
- while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
- & SDHCI_CLOCK_INT_STABLE)) {
- if (timeout == 0) {
-@@ -1154,6 +1266,12 @@ static void sdhci_set_ios(struct mmc_hos
- else
- ctrl &= ~SDHCI_CTRL_HISPD;
-
-+#ifdef SDHCI_USE_LEDS_CLASS
-+ ctrl |= SDHCI_CTRL_LED;
-+#else
-+ ctrl &= ~SDHCI_CTRL_LED;
-+#endif
-+
- sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
-
- /*
-@@ -1321,7 +1439,11 @@ static void sdhci_timeout_timer(unsigned
- if (host->mrq) {
- printk(KERN_ERR "%s: Timeout waiting for hardware "
- "interrupt.\n", mmc_hostname(host->mmc));
-+#ifdef SDHCI_DEBUG
-+ sdhci_dumpallregs(host);
-+#else
- sdhci_dumpregs(host);
-+#endif
-
- if (host->data) {
- host->data->error = -ETIMEDOUT;
-@@ -1508,6 +1630,10 @@ static irqreturn_t sdhci_irq(int irq, vo
- DBG("*** %s got interrupt: 0x%08x\n",
- mmc_hostname(host->mmc), intmask);
-
-+#ifdef SDHCI_DEBUG
-+ printk("*** %s got interrupt: 0x%08x\n", mmc_hostname(host->mmc), intmask);
-+#endif
-+
- if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
- sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
- SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
-@@ -1597,7 +1723,7 @@ int sdhci_resume_host(struct sdhci_host
- {
- int ret;
-
-- if (host->flags & SDHCI_USE_DMA) {
-+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
- if (host->ops->enable_dma)
- host->ops->enable_dma(host);
- }
-@@ -1678,23 +1804,20 @@ int sdhci_add_host(struct sdhci_host *ho
- caps = sdhci_readl(host, SDHCI_CAPABILITIES);
-
- if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
-- host->flags |= SDHCI_USE_DMA;
-- else if (!(caps & SDHCI_CAN_DO_DMA))
-- DBG("Controller doesn't have DMA capability\n");
-+ host->flags |= SDHCI_USE_SDMA;
-+ else if (!(caps & SDHCI_CAN_DO_SDMA))
-+ DBG("Controller doesn't have SDMA capability\n");
- else
-- host->flags |= SDHCI_USE_DMA;
-+ host->flags |= SDHCI_USE_SDMA;
-
- if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
-- (host->flags & SDHCI_USE_DMA)) {
-+ (host->flags & SDHCI_USE_SDMA)) {
- DBG("Disabling DMA as it is marked broken\n");
-- host->flags &= ~SDHCI_USE_DMA;
-+ host->flags &= ~SDHCI_USE_SDMA;
- }
-
-- if (host->flags & SDHCI_USE_DMA) {
-- if ((host->version >= SDHCI_SPEC_200) &&
-- (caps & SDHCI_CAN_DO_ADMA2))
-- host->flags |= SDHCI_USE_ADMA;
-- }
-+ if ((host->version >= SDHCI_SPEC_200) && (caps & SDHCI_CAN_DO_ADMA2))
-+ host->flags |= SDHCI_USE_ADMA;
-
- if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
- (host->flags & SDHCI_USE_ADMA)) {
-@@ -1702,13 +1825,14 @@ int sdhci_add_host(struct sdhci_host *ho
- host->flags &= ~SDHCI_USE_ADMA;
- }
-
-- if (host->flags & SDHCI_USE_DMA) {
-+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
- if (host->ops->enable_dma) {
- if (host->ops->enable_dma(host)) {
- printk(KERN_WARNING "%s: No suitable DMA "
- "available. Falling back to PIO.\n",
- mmc_hostname(mmc));
-- host->flags &= ~(SDHCI_USE_DMA | SDHCI_USE_ADMA);
-+ host->flags &=
-+ ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
- }
- }
- }
-@@ -1736,7 +1860,7 @@ int sdhci_add_host(struct sdhci_host *ho
- * mask, but PIO does not need the hw shim so we set a new
- * mask here in that case.
- */
-- if (!(host->flags & SDHCI_USE_DMA)) {
-+ if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) {
- host->dma_mask = DMA_BIT_MASK(64);
- mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
- }
-@@ -1757,13 +1881,15 @@ int sdhci_add_host(struct sdhci_host *ho
- host->timeout_clk =
- (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
- if (host->timeout_clk == 0) {
-- if (!host->ops->get_timeout_clock) {
-+ if (host->ops->get_timeout_clock) {
-+ host->timeout_clk = host->ops->get_timeout_clock(host);
-+ } else if (!(host->quirks &
-+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
- printk(KERN_ERR
- "%s: Hardware doesn't specify timeout clock "
- "frequency.\n", mmc_hostname(mmc));
- return -ENODEV;
- }
-- host->timeout_clk = host->ops->get_timeout_clock(host);
- }
- if (caps & SDHCI_TIMEOUT_CLK_UNIT)
- host->timeout_clk *= 1000;
-@@ -1772,7 +1898,8 @@ int sdhci_add_host(struct sdhci_host *ho
- * Set host parameters.
- */
- mmc->ops = &sdhci_ops;
-- if (host->ops->get_min_clock)
-+ if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK &&
-+ host->ops->set_clock && host->ops->get_min_clock)
- mmc->f_min = host->ops->get_min_clock(host);
- else
- mmc->f_min = host->max_clk / 256;
-@@ -1810,7 +1937,7 @@ int sdhci_add_host(struct sdhci_host *ho
- */
- if (host->flags & SDHCI_USE_ADMA)
- mmc->max_hw_segs = 128;
-- else if (host->flags & SDHCI_USE_DMA)
-+ else if (host->flags & SDHCI_USE_SDMA)
- mmc->max_hw_segs = 1;
- else /* PIO */
- mmc->max_hw_segs = 128;
-@@ -1893,10 +2020,10 @@ int sdhci_add_host(struct sdhci_host *ho
-
- mmc_add_host(mmc);
-
-- printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n",
-+ printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s\n",
- mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
-- (host->flags & SDHCI_USE_ADMA)?"A":"",
-- (host->flags & SDHCI_USE_DMA)?"DMA":"PIO");
-+ (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
-+ (host->flags & SDHCI_USE_SDMA) ? "SDMA" : "PIO");
-
- sdhci_enable_card_detection(host);
-
---- /dev/null
-+++ b/drivers/mmc/host/sdhci-cns3xxx.c
-@@ -0,0 +1,313 @@
-+/*******************************************************************************
-+ *
-+ * drivers/mmc/host/sdhci-cns3xxx.c
-+ *
-+ * SDHCI support for the CNS3XXX SOCs
-+ *
-+ * Author: Scott Shu
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ *
-+ ******************************************************************************/
-+
-+#include <linux/delay.h>
-+#include <linux/highmem.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <linux/mmc/host.h>
-+
-+#include <asm/scatterlist.h>
-+#include <asm/io.h>
-+#include <linux/interrupt.h>
-+
-+#include <mach/sdhci.h>
-+#include <mach/pm.h>
-+
-+#include "sdhci.h"
-+
-+//#define DEBUG
-+
-+#define MAX_BUS_CLK (4)
-+
-+static unsigned __initdata use_dma = 0;
-+
-+struct sdhci_cns3xxx {
-+ struct sdhci_host *host;
-+ struct platform_device *pdev;
-+ struct resource *ioarea;
-+ struct cns3xxx_sdhci_platdata *pdata;
-+ struct clk *clk_io;
-+ struct clk *clk_bus[MAX_BUS_CLK];
-+};
-+
-+static unsigned int sdhci_cns3xxx_get_max_clk(struct sdhci_host *host)
-+{
-+ int clk = 50000000;
-+
-+ return clk;
-+}
-+
-+static unsigned int sdhci_cns3xxx_get_timeout_clk(struct sdhci_host *host)
-+{
-+ return sdhci_cns3xxx_get_max_clk(host) / 100000;
-+}
-+
-+/*
-+ * sdhci_cns3xxx_set_clock - callback on clock change
-+ *
-+ * When the card's clock is going to be changed, look at the new frequency
-+ * and find the best clock source to go with it.
-+ */
-+static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock)
-+{
-+ u16 clk;
-+ unsigned long timeout;
-+
-+ if (clock == host->clock)
-+ return;
-+
-+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
-+
-+ if (clock == 0)
-+ goto out;
-+#if 1
-+ clk = 0x03 << SDHCI_DIVIDER_SHIFT; /* base clock divided by 3 */
-+#else
-+ /* high speed mode or normal speed mode */
-+ if (0x4 & sdhci_readw(host, 0x28)) {
-+ clk = 0x03 << SDHCI_DIVIDER_SHIFT; /* base clock divided by 3 */
-+ } else {
-+ clk = 0x02 << SDHCI_DIVIDER_SHIFT; /* base clock divided by 4 */
-+ }
-+#endif
-+ clk |= SDHCI_CLOCK_INT_EN;
-+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
-+
-+ timeout = 10;
-+ while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
-+ & SDHCI_CLOCK_INT_STABLE)) {
-+ if (timeout == 0) {
-+ return;
-+ }
-+ timeout--;
-+ mdelay(1);
-+ }
-+
-+ clk |= SDHCI_CLOCK_CARD_EN;
-+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
-+
-+ host->timeout_clk = sdhci_cns3xxx_get_timeout_clk(host);
-+out:
-+ host->clock = clock;
-+}
-+
-+static struct sdhci_ops sdhci_cns3xxx_ops = {
-+ .get_max_clock = sdhci_cns3xxx_get_max_clk,
-+ .get_timeout_clock = sdhci_cns3xxx_get_timeout_clk,
-+ .set_clock = sdhci_cns3xxx_set_clock,
-+};
-+
-+static int __devinit sdhci_cns3xxx_probe(struct platform_device *pdev)
-+{
-+ struct cns3xxx_sdhci_platdata *pdata = pdev->dev.platform_data;
-+ struct device *dev = &pdev->dev;
-+ struct sdhci_host *host;
-+ struct sdhci_cns3xxx *sc;
-+ struct resource *res;
-+ int ret, irq;
-+
-+ if (!pdata) {
-+ dev_err(dev, "no device data specified\n");
-+ return -ENOENT;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(dev, "no irq specified\n");
-+ return irq;
-+ }
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ dev_err(dev, "no memory specified\n");
-+ return -ENOENT;
-+ }
-+
-+ host = sdhci_alloc_host(dev, sizeof(*sc));
-+ if (IS_ERR(host)) {
-+ dev_err(dev, "sdhci_alloc_host() failed\n");
-+ return PTR_ERR(host);
-+ }
-+
-+ sc = sdhci_priv(host);
-+
-+ sc->host = host;
-+ sc->pdev = pdev;
-+ sc->pdata = pdata;
-+
-+ platform_set_drvdata(pdev, host);
-+
-+ sc->ioarea = request_mem_region(res->start, resource_size(res), mmc_hostname(host->mmc));
-+ if (!sc->ioarea) {
-+ dev_err(dev, "failed to reserve register area\n");
-+ ret = -ENXIO;
-+ goto err_req_regs;
-+ }
-+
-+ host->ioaddr = ioremap_nocache(res->start, resource_size(res));
-+ if (!host->ioaddr) {
-+ dev_err(dev, "failed to map registers\n");
-+ ret = -ENXIO;
-+ goto err_req_regs;
-+ }
-+
-+ host->hw_name = "cns3xxx";
-+ host->ops = &sdhci_cns3xxx_ops;
-+ host->quirks = 0;
-+ host->irq = irq;
-+
-+ if (use_dma != 1) {
-+ host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
-+ host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
-+ } else {
-+ host->quirks |= SDHCI_QUIRK_FORCE_DMA;
-+ host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
-+ host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE);
-+ host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
-+ //host->quirks |= SDHCI_QUIRK_FORCE_BLK_SZ_2048;
-+ //host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
-+ host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
-+ host->quirks |= SDHCI_QUIRK_AUTO_CMD12;
-+ host->quirks |= SDHCI_QUIRK_READ_WAIT_CTRL;
-+ }
-+
-+ //host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
-+
-+ host->quirks |= SDHCI_QUIRK_NONSTANDARD_CLOCK;
-+
-+ host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
-+
-+ ret = sdhci_add_host(host);
-+ if (ret) {
-+ dev_err(dev, "sdhci_add_host() failed (%d)\n", ret);
-+ goto err_add_host;
-+ }
-+
-+ return 0;
-+
-+err_add_host:
-+ free_irq(host->irq, host);
-+ iounmap(host->ioaddr);
-+ release_resource(sc->ioarea);
-+ kfree(sc->ioarea);
-+
-+err_req_regs:
-+ sdhci_free_host(host);
-+
-+ return ret;
-+}
-+
-+static int __devexit sdhci_cns3xxx_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct sdhci_host *host = dev_get_drvdata(dev);
-+ struct resource *res;
-+
-+ pr_debug("%s: remove=%p\n", __func__, pdev);
-+
-+ sdhci_remove_host(host, 0);
-+ sdhci_free_host(host);
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ release_mem_region(res->start, resource_size(res));
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int sdhci_cns3xxx_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+
-+ return 0;
-+}
-+
-+static int sdhci_cns3xxx_resume(struct platform_device *dev)
-+{
-+
-+ return 0;
-+}
-+
-+#else
-+#define sdhci_cns3xxx_suspend NULL
-+#define sdhci_cns3xxx_resume NULL
-+#endif /* CONFIG_PM */
-+
-+static struct platform_driver sdhci_cns3xxx_driver = {
-+ .probe = sdhci_cns3xxx_probe,
-+ .remove = __devexit_p(sdhci_cns3xxx_remove),
-+ .suspend = sdhci_cns3xxx_suspend,
-+ .resume = sdhci_cns3xxx_resume,
-+ .driver = {
-+ .name = "cns3xxx-sdhci",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static char banner[] __initdata = KERN_INFO "cns3xxx-sdhci, (c) 2009 Cavium Networks\n";
-+
-+static int __init sdhci_cns3xxx_init(void)
-+{
-+#ifdef CONFIG_SILICON
-+ unsigned long gpioapin = __raw_readl((void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0014));;
-+#else
-+ unsigned long status = __raw_readl((void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0700));
-+#endif
-+
-+ printk(banner);
-+
-+#ifdef CONFIG_SILICON
-+ /* MMC/SD pins share with GPIOA */
-+ __raw_writel(gpioapin | (0x1fff0004), (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0014));
-+ cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
-+ cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
-+#else
-+ /* insert a delay on SDIO output interface (only for FPGA mode & high-speed mode) */
-+ __raw_writel(status | (1 << 4), (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0700));
-+#endif
-+ return platform_driver_register(&sdhci_cns3xxx_driver);
-+}
-+
-+static void __exit sdhci_cns3xxx_exit(void)
-+{
-+ platform_driver_unregister(&sdhci_cns3xxx_driver);
-+}
-+
-+module_init(sdhci_cns3xxx_init);
-+module_exit(sdhci_cns3xxx_exit);
-+
-+module_param(use_dma, uint, 0);
-+
-+MODULE_AUTHOR("Scott Shu");
-+MODULE_DESCRIPTION("Cavium Networks CNS3XXX SDHCI glue");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:cns3xxx-sdhci");
-+
-+MODULE_PARM_DESC(use_dma, "Whether to use DMA or not. Default = 0");
---- a/drivers/mmc/host/sdhci.h
-+++ b/drivers/mmc/host/sdhci.h
-@@ -8,6 +8,8 @@
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-+#ifndef __SDHCI_H
-+#define __SDHCI_H
-
- #include <linux/scatterlist.h>
- #include <linux/compiler.h>
-@@ -78,6 +80,7 @@
- #define SDHCI_POWER_330 0x0E
-
- #define SDHCI_BLOCK_GAP_CONTROL 0x2A
-+#define SDHCI_READ_WAIT_CTRL 0x04
-
- #define SDHCI_WAKE_UP_CONTROL 0x2B
-
-@@ -143,7 +146,7 @@
- #define SDHCI_CAN_DO_ADMA2 0x00080000
- #define SDHCI_CAN_DO_ADMA1 0x00100000
- #define SDHCI_CAN_DO_HISPD 0x00200000
--#define SDHCI_CAN_DO_DMA 0x00400000
-+#define SDHCI_CAN_DO_SDMA 0x00400000
- #define SDHCI_CAN_VDD_330 0x01000000
- #define SDHCI_CAN_VDD_300 0x02000000
- #define SDHCI_CAN_VDD_180 0x04000000
-@@ -232,6 +235,12 @@ struct sdhci_host {
- #define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
- /* Controller needs 10ms delay between applying power and clock */
- #define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
-+/* Controller uses SDCLK instead of TMCLK for data timeouts */
-+#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
-+/* Controller uses Auto CMD12 */
-+#define SDHCI_QUIRK_AUTO_CMD12 (1<<25)
-+/* Controller uses read wait control protocol */
-+#define SDHCI_QUIRK_READ_WAIT_CTRL (1<<26)
-
- int irq; /* Device IRQ */
- void __iomem * ioaddr; /* Mapped address */
-@@ -250,7 +259,7 @@ struct sdhci_host {
- spinlock_t lock; /* Mutex */
-
- int flags; /* Host attributes */
--#define SDHCI_USE_DMA (1<<0) /* Host is DMA capable */
-+#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
- #define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
- #define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
- #define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
-@@ -406,3 +415,5 @@ extern void sdhci_remove_host(struct sdh
- extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
- extern int sdhci_resume_host(struct sdhci_host *host);
- #endif
-+
-+#endif /* __SDHCI_H */
---- a/include/linux/mmc/card.h
-+++ b/include/linux/mmc/card.h
-@@ -40,6 +40,8 @@ struct mmc_csd {
- };
-
- struct mmc_ext_csd {
-+ u8 rev;
-+ unsigned int sa_timeout; /* Units: 100ns */
- unsigned int hs_max_dtr;
- unsigned int sectors;
- };
-@@ -62,7 +64,8 @@ struct sdio_cccr {
- low_speed:1,
- wide_bus:1,
- high_power:1,
-- high_speed:1;
-+ high_speed:1,
-+ disable_cd:1;
- };
-
- struct sdio_cis {
-@@ -94,6 +97,8 @@ struct mmc_card {
- #define MMC_STATE_READONLY (1<<1) /* card is read-only */
- #define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */
- #define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */
-+ unsigned int quirks; /* card quirks */
-+#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
-
- u32 raw_cid[4]; /* raw card CID */
- u32 raw_csd[4]; /* raw card CSD */
-@@ -129,6 +134,11 @@ struct mmc_card {
- #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
- #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
-
-+static inline int mmc_card_lenient_fn0(const struct mmc_card *c)
-+{
-+ return c->quirks & MMC_QUIRK_LENIENT_FN0;
-+}
-+
- #define mmc_card_name(c) ((c)->cid.prod_name)
- #define mmc_card_id(c) (dev_name(&(c)->dev))
-
---- a/include/linux/mmc/core.h
-+++ b/include/linux/mmc/core.h
-@@ -139,6 +139,7 @@ extern unsigned int mmc_align_data_size(
-
- extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
- extern void mmc_release_host(struct mmc_host *host);
-+extern int mmc_try_claim_host(struct mmc_host *host);
-
- /**
- * mmc_claim_host - exclusively claim a host
---- a/include/linux/mmc/host.h
-+++ b/include/linux/mmc/host.h
-@@ -11,6 +11,7 @@
- #define LINUX_MMC_HOST_H
-
- #include <linux/leds.h>
-+#include <linux/sched.h>
-
- #include <linux/mmc/core.h>
-
-@@ -51,6 +52,35 @@ struct mmc_ios {
- };
-
- struct mmc_host_ops {
-+ /*
-+ * Hosts that support power saving can use the 'enable' and 'disable'
-+ * methods to exit and enter power saving states. 'enable' is called
-+ * when the host is claimed and 'disable' is called (or scheduled with
-+ * a delay) when the host is released. The 'disable' is scheduled if
-+ * the disable delay set by 'mmc_set_disable_delay()' is non-zero,
-+ * otherwise 'disable' is called immediately. 'disable' may be
-+ * scheduled repeatedly, to permit ever greater power saving at the
-+ * expense of ever greater latency to re-enable. Rescheduling is
-+ * determined by the return value of the 'disable' method. A positive
-+ * value gives the delay in milliseconds.
-+ *
-+ * In the case where a host function (like set_ios) may be called
-+ * with or without the host claimed, enabling and disabling can be
-+ * done directly and will nest correctly. Call 'mmc_host_enable()' and
-+ * 'mmc_host_lazy_disable()' for this purpose, but note that these
-+ * functions must be paired.
-+ *
-+ * Alternatively, 'mmc_host_enable()' may be paired with
-+ * 'mmc_host_disable()' which calls 'disable' immediately. In this
-+ * case the 'disable' method will be called with 'lazy' set to 0.
-+ * This is mainly useful for error paths.
-+ *
-+ * Because lazy disable may be called from a work queue, the 'disable'
-+ * method must claim the host when 'lazy' != 0, which will work
-+ * correctly because recursion is detected and handled.
-+ */
-+ int (*enable)(struct mmc_host *host);
-+ int (*disable)(struct mmc_host *host, int lazy);
- void (*request)(struct mmc_host *host, struct mmc_request *req);
- /*
- * Avoid calling these three functions too often or in a "fast path",
-@@ -118,6 +148,9 @@ struct mmc_host {
- #define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */
- #define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */
- #define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */
-+#define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */
-+#define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */
-+#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */
-
- /* host specific block data */
- unsigned int max_seg_size; /* see blk_queue_max_segment_size */
-@@ -142,9 +175,18 @@ struct mmc_host {
- unsigned int removed:1; /* host is being removed */
- #endif
-
-+ /* Only used with MMC_CAP_DISABLE */
-+ int enabled; /* host is enabled */
-+ int nesting_cnt; /* "enable" nesting count */
-+ int en_dis_recurs; /* detect recursion */
-+ unsigned int disable_delay; /* disable delay in msecs */
-+ struct delayed_work disable; /* disabling work */
-+
- struct mmc_card *card; /* device attached to this host */
-
- wait_queue_head_t wq;
-+ struct task_struct *claimer; /* task that has host claimed */
-+ int claim_cnt; /* "claim" nesting count */
-
- struct delayed_work detect;
-
-@@ -183,6 +225,9 @@ static inline void *mmc_priv(struct mmc_
- extern int mmc_suspend_host(struct mmc_host *, pm_message_t);
- extern int mmc_resume_host(struct mmc_host *);
-
-+extern void mmc_power_save_host(struct mmc_host *host);
-+extern void mmc_power_restore_host(struct mmc_host *host);
-+
- extern void mmc_detect_change(struct mmc_host *, unsigned long delay);
- extern void mmc_request_done(struct mmc_host *, struct mmc_request *);
-
-@@ -197,5 +242,19 @@ struct regulator;
- int mmc_regulator_get_ocrmask(struct regulator *supply);
- int mmc_regulator_set_ocr(struct regulator *supply, unsigned short vdd_bit);
-
-+int mmc_card_awake(struct mmc_host *host);
-+int mmc_card_sleep(struct mmc_host *host);
-+int mmc_card_can_sleep(struct mmc_host *host);
-+
-+int mmc_host_enable(struct mmc_host *host);
-+int mmc_host_disable(struct mmc_host *host);
-+int mmc_host_lazy_disable(struct mmc_host *host);
-+
-+static inline void mmc_set_disable_delay(struct mmc_host *host,
-+ unsigned int disable_delay)
-+{
-+ host->disable_delay = disable_delay;
-+}
-+
- #endif
-
---- a/include/linux/mmc/mmc.h
-+++ b/include/linux/mmc/mmc.h
-@@ -31,6 +31,7 @@
- #define MMC_ALL_SEND_CID 2 /* bcr R2 */
- #define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
- #define MMC_SET_DSR 4 /* bc [31:16] RCA */
-+#define MMC_SLEEP_AWAKE 5 /* ac [31:16] RCA 15:flg R1b */
- #define MMC_SWITCH 6 /* ac [31:0] See below R1b */
- #define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
- #define MMC_SEND_EXT_CSD 8 /* adtc R1 */
-@@ -127,6 +128,7 @@
- #define R1_STATUS(x) (x & 0xFFFFE000)
- #define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
- #define R1_READY_FOR_DATA (1 << 8) /* sx, a */
-+#define R1_SWITCH_ERROR (1 << 7) /* sx, c */
- #define R1_APP_CMD (1 << 5) /* sr, c */
-
- /*
-@@ -254,6 +256,7 @@ struct _mmc_csd {
- #define EXT_CSD_CARD_TYPE 196 /* RO */
- #define EXT_CSD_REV 192 /* RO */
- #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
-+#define EXT_CSD_S_A_TIMEOUT 217
-
- /*
- * EXT_CSD field definitions
---- a/include/linux/mmc/sdio_func.h
-+++ b/include/linux/mmc/sdio_func.h
-@@ -67,6 +67,7 @@ struct sdio_func {
-
- #define sdio_get_drvdata(f) dev_get_drvdata(&(f)->dev)
- #define sdio_set_drvdata(f,d) dev_set_drvdata(&(f)->dev, d)
-+#define dev_to_sdio_func(d) container_of(d, struct sdio_func, dev)
-
- /*
- * SDIO function device driver
-@@ -81,6 +82,8 @@ struct sdio_driver {
- struct device_driver drv;
- };
-
-+#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv)
-+
- /**
- * SDIO_DEVICE - macro used to describe a specific SDIO device
- * @vend: the 16 bit manufacturer code
---- a/include/linux/mmc/sdio_ids.h
-+++ b/include/linux/mmc/sdio_ids.h
-@@ -22,6 +22,12 @@
- /*
- * Vendors and devices. Sort key: vendor first, device next.
- */
-+#define SDIO_VENDOR_ID_INTEL 0x0089
-+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402
-+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIFI 0x1403
-+#define SDIO_DEVICE_ID_INTEL_IWMC3200TOP 0x1404
-+#define SDIO_DEVICE_ID_INTEL_IWMC3200GPS 0x1405
-+#define SDIO_DEVICE_ID_INTEL_IWMC3200BT 0x1406
-
- #define SDIO_VENDOR_ID_MARVELL 0x02df
- #define SDIO_DEVICE_ID_MARVELL_LIBERTAS 0x9103
+++ /dev/null
---- /dev/null
-+++ b/drivers/net/cns3xxx/cns3xxx_config.h
-@@ -0,0 +1,136 @@
-+/*******************************************************************************
-+ *
-+ * Copyright (c) 2009 Cavium Networks
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the Free
-+ * Software Foundation; either version 2 of the License, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program; if not, write to the Free Software Foundation, Inc., 59
-+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this distribution in the
-+ * file called LICENSE.
-+ *
-+ ********************************************************************************/
-+
-+#include <linux/version.h>
-+
-+#ifndef CNS3XXX_CONFIG_H
-+#define CNS3XXX_CONFIG_H
-+
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,27)
-+#define LINUX2627 1
-+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,31)
-+#define LINUX2631 1
-+#endif
-+
-+
-+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-+#define CNS3XXX_VLAN_8021Q
-+#endif
-+
-+#ifdef CNS3XXX_VLAN_8021Q
-+//#define CNS3XXX_NIC_MODE_8021Q // use NIC mode to support 8021Q
-+
-+#endif
-+
-+#define CONFIG_CNS3XXX_JUMBO_FRAME
-+
-+#ifdef CONFIG_CNS3XXX_JUMBO_FRAME
-+#define MAX_PACKET_LEN 9600
-+#else
-+#define MAX_PACKET_LEN 1536
-+#endif
-+
-+//#define CONFIG_SWITCH_BIG_ENDIAN
-+
-+//#define CONFIG_FPGA_FORCE
-+
-+//#define CNS3XXX_GIGA_MODE
-+
-+#define CNS3XXX_SET_ARL_TABLE
-+#define CNS3XXX_AGE_ENABLE
-+#define CNS3XXX_LEARN_ENABLE
-+#define CNS3XXX_CPU_PORT_FC
-+#define CNS3XXX_CPU_MIB_COUNTER
-+#define CNS3XXX_MAC0_MIB_COUNTER
-+#define CNS3XXX_MAC1_MIB_COUNTER
-+//#define CNS3XXX_MAC2_MIB_COUNTER
-+//#define QOS_TEST
-+//#define ACCEPT_CRC_BAD_PKT
-+//#define CONFIG_FAST_BRIDGE
-+//#define CONFIG_HOLP_TEST
-+
-+
-+#define CONFIG_CNS3XXX_NAPI
-+#ifdef CONFIG_CNS3XXX_NAPI
-+#define CNS3XXX_NAPI_WEIGHT 64
-+#endif
-+//#define CONFIG_NIC_MODE
-+//#define CNS3XXX_TX_HW_CHECKSUM
-+//#define CNS3XXX_RX_HW_CHECKSUM
-+//#define CNS3XXX_STATUS_ISR
-+//#define CNS3XXX_TEST_ONE_LEG_VLAN
-+//#define CNS3XXX_TX_DSCP_PROC
-+
-+
-+#define CNS3XXX_FSQF_RING0_ISR
-+//#define CNS3XXX_TSTC_RING0_ISR
-+//#define CNS3XXX_TSTC_RING1_ISR
-+
-+//#define CNS3XXX_COMPARE_PACKET
-+//#define CONFIG_FPGA_10
-+//#define CNS3XXX_CONFIG_SIM_MODE
-+
-+#define CNS3XXX_8021Q_HW_TX
-+
-+
-+#ifndef CONFIG_CNS3XXX_SPPE
-+#define IVL // if no define, use SVL
-+#endif
-+//#define CNS3XXX_4N // if don't define it, use 4N+2
-+
-+//#define NCNB_TEST
-+//#define CNS3XXX_TEST_D_CACHE
-+#define CNS3XXX_FREE_TX_IN_RX_PATH
-+
-+
-+//#define DEBUG_RX
-+//#define DEBUG_TX
-+//#define DEBUG_PRIO_IPDSCR
-+#define DEBUG_RX_PROC
-+#define DEBUG_TX_PROC
-+//#define DEBUG_PHY_PROC
-+#define CNS3XXX_PVID_PROC
-+#define CNS3XXX_SARL_PROC
-+
-+
-+//#define DOUBLE_RING_TEST
-+
-+//#define CNS3XXX_DOUBLE_RX_RING
-+//#define CNS3XXX_DOUBLE_TX_RING
-+#define CNS3XXX_USE_MASK
-+
-+#define CNS3XXX_CONFIG_CHANGE_TX_RING
-+
-+#ifdef CNS3XXX_DOUBLE_RX_RING
-+#define CNS3XXX_FSQF_RING1_ISR
-+#endif
-+
-+//#define CNS3XXX_DELAYED_INTERRUPT
-+
-+#ifdef CNS3XXX_DELAYED_INTERRUPT
-+#define MAX_PEND_INT_CNT 0x06
-+#define MAX_PEND_TIME 0x20
-+#endif
-+
-+//#define CNS3XXX_ENABLE_RINT1
-+#endif
---- /dev/null
-+++ b/drivers/net/cns3xxx/cns3xxx_ethtool.c
-@@ -0,0 +1,436 @@
-+/*******************************************************************************
-+ *
-+ *
-+ * Copyright (c) 2009 Cavium Networks
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the Free
-+ * Software Foundation; either version 2 of the License, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program; if not, write to the Free Software Foundation, Inc., 59
-+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this distribution in the
-+ * file called LICENSE.
-+ *
-+ ********************************************************************************/
-+
-+//#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/ethtool.h>
-+#include <linux/netdevice.h>
-+#include "cns3xxx_symbol.h"
-+#include "cns3xxx.h"
-+#include "cns3xxx_tool.h"
-+
-+// ethtool support reference e100.c and e1000_ethtool.c .
-+static void cns3xxx_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
-+{
-+ strcpy(info->driver, "cns3xxx");
-+ strcpy(info->version, DRV_VERSION);
-+ strcpy(info->fw_version, "N/A");
-+ strcpy(info->bus_info, "N/A");
-+}
-+
-+static void cns3xxx_get_ringparam(struct net_device *netdev,
-+ struct ethtool_ringparam *ring)
-+{
-+ CNS3XXXPrivate *priv = netdev_priv(netdev);
-+
-+ ring->rx_max_pending = priv->rx_ring->max_ring_size;
-+ ring->tx_max_pending = priv->tx_ring->max_ring_size;
-+ ring->rx_pending = priv->rx_ring->ring_size;
-+ ring->tx_pending = priv->tx_ring->ring_size;
-+#if 0
-+ struct nic *nic = netdev_priv(netdev);
-+ struct param_range *rfds = &nic->params.rfds;
-+ struct param_range *cbs = &nic->params.cbs;
-+
-+ ring->rx_max_pending = rfds->max;
-+ ring->tx_max_pending = cbs->max;
-+ ring->rx_mini_max_pending = 0;
-+ ring->rx_jumbo_max_pending = 0;
-+ ring->rx_pending = rfds->count;
-+ ring->tx_pending = cbs->count;
-+ ring->rx_mini_pending = 0;
-+ ring->rx_jumbo_pending = 0;
-+#endif
-+}
-+
-+
-+
-+static int cns3xxx_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
-+{
-+ int cns3xxx_up(void);
-+ int cns3xxx_down(void);
-+ int cns3xxx_close(struct net_device *dev);
-+ int cns3xxx_open(struct net_device *dev);
-+ extern struct net_device *net_dev_array[];
-+
-+ CNS3XXXPrivate *priv = netdev_priv(netdev);
-+
-+ int i=0;
-+
-+#if 0
-+ struct nic *nic = netdev_priv(netdev);
-+ struct param_range *rfds = &nic->params.rfds;
-+ struct param_range *cbs = &nic->params.cbs;
-+
-+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
-+ return -EINVAL;
-+
-+ if(netif_running(netdev))
-+ e100_down(nic);
-+ rfds->count = max(ring->rx_pending, rfds->min);
-+ rfds->count = min(rfds->count, rfds->max);
-+ cbs->count = max(ring->tx_pending, cbs->min);
-+ cbs->count = min(cbs->count, cbs->max);
-+ DPRINTK(DRV, INFO, "Ring Param settings: rx: %d, tx %d\n",
-+ rfds->count, cbs->count);
-+ if(netif_running(netdev))
-+ e100_up(nic);
-+
-+#endif
-+ //ring->rx_max_pending = RX_DESC_SIZE;
-+ //ring->tx_max_pending = TX_DESC_SIZE;
-+
-+#if 0
-+ printk("ring->rx_max_pending: %d\n", ring->rx_max_pending);
-+ printk("ring->tx_max_pending: %d\n", ring->tx_max_pending);
-+ printk("ring->rx_pending: %d\n", ring->rx_pending);
-+ printk("ring->tx_pending: %d\n", ring->tx_pending);
-+#endif
-+
-+ for (i=0 ; i < NETDEV_SIZE ; ++i) {
-+ if(net_dev_array[i] && netif_running(net_dev_array[i])) {
-+ //printk("close net_dev_array[%d]: %s\n", i, net_dev_array[i]);
-+ cns3xxx_close(net_dev_array[i]);
-+ }
-+ }
-+
-+ //cns3xxx_down();
-+
-+ priv->rx_ring->ring_size = min(ring->rx_pending, priv->rx_ring->max_ring_size);
-+ priv->tx_ring->ring_size = min(ring->rx_pending, priv->tx_ring->max_ring_size);
-+
-+ for (i=0 ; i < NETDEV_SIZE ; ++i) {
-+ if(net_dev_array[i] && netif_running(net_dev_array[i])) {
-+ //printk("open net_dev_array[%d]: %s\n", i, net_dev_array[i]);
-+ cns3xxx_open(net_dev_array[i]);
-+ }
-+ }
-+ //cns3xxx_up();
-+
-+ return 0;
-+}
-+
-+static uint32_t cns3xxx_get_tx_csum(struct net_device *netdev)
-+{
-+ //return (netdev->features & NETIF_F_HW_CSUM) != 0;
-+ return (netdev->features & NETIF_F_IP_CSUM) != 0;
-+}
-+
-+static int cns3xxx_set_tx_csum(struct net_device *netdev, uint32_t data)
-+{
-+ if (data)
-+ netdev->features |= NETIF_F_IP_CSUM;
-+ else
-+ netdev->features &= ~NETIF_F_IP_CSUM;
-+ return 0;
-+}
-+
-+static uint32_t cns3xxx_get_rx_csum(struct net_device *netdev)
-+{
-+ //struct e1000_adapter *adapter = netdev_priv(netdev);
-+ //return adapter->rx_csum;
-+ return 1;
-+}
-+
-+static int cns3xxx_set_rx_csum(struct net_device *netdev, uint32_t data)
-+{
-+ return 0;
-+}
-+
-+u32 cns3xxx_get_sg(struct net_device *dev)
-+{
-+#ifdef NETIF_F_SG
-+ return (dev->features & NETIF_F_SG) != 0;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+int cns3xxx_set_sg(struct net_device *dev, u32 data)
-+{
-+#ifdef NETIF_F_SG
-+ if (data)
-+ dev->features |= NETIF_F_SG;
-+ else
-+ dev->features &= ~NETIF_F_SG;
-+#endif
-+
-+ return 0;
-+}
-+
-+static void cns3xxx_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
-+{
-+ u32 mac_port_config = 0;
-+ CNS3XXXPrivate *priv = netdev_priv(netdev);
-+
-+ switch (priv->net_device_priv->which_port)
-+ {
-+ case MAC_PORT0:
-+ {
-+ mac_port_config = MAC0_CFG_REG;
-+ break;
-+ }
-+ case MAC_PORT1:
-+ {
-+ mac_port_config = MAC1_CFG_REG;
-+ break;
-+ }
-+ case MAC_PORT2:
-+ {
-+ mac_port_config = MAC2_CFG_REG;
-+ break;
-+ }
-+ }
-+
-+
-+ pause->autoneg = ( ((mac_port_config >> 7) & 1) ? AUTONEG_ENABLE : AUTONEG_DISABLE);
-+ pause->tx_pause = (mac_port_config >> 6) & 1;
-+ pause->rx_pause = (mac_port_config >> 5) & 1;
-+}
-+
-+static int cns3xxx_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
-+{
-+ u32 mac_port_config = 0;
-+ CNS3XXXPrivate *priv = netdev_priv(netdev);
-+
-+ switch (priv->net_device_priv->which_port)
-+ {
-+ case MAC_PORT0:
-+ {
-+ mac_port_config = MAC0_CFG_REG;
-+ break;
-+ }
-+ case MAC_PORT1:
-+ {
-+ mac_port_config = MAC1_CFG_REG;
-+ break;
-+ }
-+ case MAC_PORT2:
-+ {
-+ mac_port_config = MAC2_CFG_REG;
-+ break;
-+ }
-+ }
-+
-+
-+ mac_port_config &= ~(0x1 << 7); // clean AN
-+ mac_port_config &= ~(0x1 << 11); // clean rx flow control
-+ mac_port_config &= ~(0x1 << 12); // clean tx flow control
-+
-+ mac_port_config |= ( (pause->autoneg << 7) | (pause->rx_pause << 11) | (pause->tx_pause << 12) );
-+
-+
-+ switch (priv->net_device_priv->which_port)
-+ {
-+ case MAC_PORT0:
-+ {
-+ MAC0_CFG_REG = mac_port_config;
-+ break;
-+ }
-+ case MAC_PORT1:
-+ {
-+ MAC1_CFG_REG = mac_port_config;
-+ break;
-+ }
-+ case MAC_PORT2:
-+ {
-+ MAC2_CFG_REG = mac_port_config;
-+ break;
-+ }
-+ }
-+ return 0;
-+}
-+
-+u32 cns3xxx_get_link(struct net_device *netdev)
-+{
-+ u32 mac_port_config = 0;
-+ CNS3XXXPrivate *priv = netdev_priv(netdev);
-+
-+ switch (priv->net_device_priv->which_port)
-+ {
-+ case MAC_PORT0:
-+ {
-+ mac_port_config = MAC0_CFG_REG;
-+ break;
-+ }
-+ case MAC_PORT1:
-+ {
-+ mac_port_config = MAC1_CFG_REG;
-+ break;
-+ }
-+ case MAC_PORT2:
-+ {
-+ mac_port_config = MAC2_CFG_REG;
-+ break;
-+ }
-+ }
-+
-+ return (mac_port_config & 1 ) ? 1 : 0;
-+ //return netif_carrier_ok(dev) ? 1 : 0;
-+}
-+
-+
-+static int cns3xxx_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
-+{
-+ u8 value;
-+ u32 mac_port_config = 0;
-+ CNS3XXXPrivate *priv = netdev_priv(netdev);
-+
-+
-+ if (priv->net_device_priv->nic_setting == 0) { // connect to switch chip
-+
-+ GET_MAC_PORT_CFG(priv->net_device_priv->which_port, mac_port_config)
-+
-+ ecmd->supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full| SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_Pause);
-+
-+ ecmd->duplex = ((mac_port_config >> 4) & 0x1) ? DUPLEX_FULL : DUPLEX_HALF ;
-+
-+ value = ((mac_port_config >> 2) & 0x3);
-+ switch (value)
-+ {
-+ case 0:
-+ ecmd->speed = SPEED_10;
-+ break;
-+ case 1:
-+ ecmd->speed = SPEED_100;
-+ break;
-+ case 2:
-+ ecmd->speed = SPEED_1000;
-+ break;
-+ }
-+
-+ ecmd->autoneg = ((mac_port_config >> 7) & 1) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
-+
-+
-+
-+ } else { // connect to PHY chip
-+
-+ }
-+
-+ return 0;
-+}
-+
-+// set speed and duplex
-+int cns3xxx_set_spd_dplx(struct net_device *netdev, u16 spddplx)
-+{
-+ u32 mac_port_config = 0;
-+ CNS3XXXPrivate *priv = netdev_priv(netdev);
-+
-+ GET_MAC_PORT_CFG(priv->net_device_priv->which_port, mac_port_config)
-+
-+ //printk("mac_port_config: %x\n", mac_port_config);
-+
-+ mac_port_config &= ~(0x3 << 8); // clear speed
-+ mac_port_config &= ~(0x1 << 10); // clear duplex
-+ mac_port_config &= ~(0x1 << 7); // disable AN
-+
-+ switch (spddplx) {
-+ case AUTONEG_ENABLE:
-+ mac_port_config |= (0x1 << 7); // enable AN
-+ break;
-+ case SPEED_10 + DUPLEX_HALF:
-+ printk("10, halt\n");
-+ mac_port_config |= (0 << 8); // set speed
-+ mac_port_config |= (0 << 10); // set duplex
-+ //printk("xxx mac_port_config: %x\n", mac_port_config);
-+ break;
-+ case SPEED_10 + DUPLEX_FULL:
-+ mac_port_config |= (0 << 8); // set speed
-+ mac_port_config |= (1 << 10); // set duplex
-+ break;
-+ case SPEED_100 + DUPLEX_HALF:
-+ mac_port_config |= (1 << 8); // set speed
-+ mac_port_config |= (0 << 10); // set duplex
-+ break;
-+ case SPEED_100 + DUPLEX_FULL:
-+ mac_port_config |= (1 << 8); // set speed
-+ mac_port_config |= (1 << 10); // set duplex
-+ break;
-+ case SPEED_1000 + DUPLEX_HALF:
-+ mac_port_config |= (2 << 8); // set speed
-+ mac_port_config |= (0 << 10); // set duplex
-+ break;
-+ case SPEED_1000 + DUPLEX_FULL:
-+ mac_port_config |= (2 << 8); // set speed
-+ mac_port_config |= (1 << 10); // set duplex
-+ break;
-+ default:
-+ //printk("Unsupported Speed/Duplex configuration\n");
-+ return -EINVAL;
-+ }
-+
-+ SET_MAC_PORT_CFG(priv->net_device_priv->which_port, mac_port_config)
-+
-+ return 0;
-+}
-+
-+static int cns3xxx_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
-+{
-+ u8 value = 0;
-+ CNS3XXXPrivate *priv = netdev_priv(netdev);
-+
-+ if (priv->net_device_priv->nic_setting == 0) { // connect to switch chip
-+ if (ecmd->autoneg == AUTONEG_ENABLE) {
-+ printk("autoneg\n");
-+ if ((value=cns3xxx_set_spd_dplx(netdev, AUTONEG_ENABLE)) != 0) {
-+ return -EINVAL;
-+ }
-+ } else {
-+ printk("no autoneg\n");
-+ if ((value=cns3xxx_set_spd_dplx(netdev, ecmd->speed + ecmd->duplex)) != 0) {
-+ return -EINVAL;
-+ }
-+
-+
-+ }
-+
-+ } else { // connect to PHY chip
-+
-+ }
-+
-+ // down then up
-+ return 0;
-+}
-+
-+static const struct ethtool_ops cns3xxx_ethtool_ops = {
-+ .get_drvinfo = cns3xxx_get_drvinfo,
-+ .get_ringparam = cns3xxx_get_ringparam,
-+ .set_ringparam = cns3xxx_set_ringparam,
-+ .get_rx_csum = cns3xxx_get_rx_csum,
-+ .set_rx_csum = cns3xxx_set_rx_csum,
-+ .get_tx_csum = cns3xxx_get_tx_csum,
-+ .set_tx_csum = cns3xxx_set_tx_csum,
-+ .get_sg = cns3xxx_get_sg,
-+ .set_sg = cns3xxx_set_sg,
-+ .get_pauseparam = cns3xxx_get_pauseparam,
-+ .set_pauseparam = cns3xxx_set_pauseparam,
-+ .get_link = cns3xxx_get_link,
-+ .get_settings = cns3xxx_get_settings,
-+ .set_settings = cns3xxx_set_settings,
-+};
-+
-+void cns3xxx_set_ethtool_ops(struct net_device *netdev)
-+{
-+ SET_ETHTOOL_OPS(netdev, &cns3xxx_ethtool_ops);
-+}
---- /dev/null
-+++ b/drivers/net/cns3xxx/cns3xxx.h
-@@ -0,0 +1,452 @@
-+/*******************************************************************************
-+ *
-+ * Copyright (c) 2009 Cavium Networks
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the Free
-+ * Software Foundation; either version 2 of the License, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program; if not, write to the Free Software Foundation, Inc., 59
-+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this distribution in the
-+ * file called LICENSE.
-+ *
-+ ********************************************************************************/
-+
-+#ifndef CNS3XXX_H
-+#define CNS3XXX_H
-+
-+#include "cns3xxx_symbol.h"
-+#include "cns3xxx_config.h"
-+#include <linux/cns3xxx/switch_api.h>
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/bootmem.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/fcntl.h>
-+#include <linux/interrupt.h>
-+#include <linux/ptrace.h>
-+#include <linux/ioport.h>
-+#include <linux/in.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/proc_fs.h>
-+#include <linux/reboot.h>
-+#include <asm/bitops.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+//#include <asm/hardware.h>
-+#include <linux/pci.h>
-+#include <linux/errno.h>
-+#include <linux/delay.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/ip.h>
-+#include <linux/if_ether.h>
-+#include <linux/icmp.h>
-+#include <linux/udp.h>
-+#include <linux/tcp.h>
-+#include <linux/if_arp.h>
-+#include <net/arp.h>
-+
-+
-+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-+#include <linux/if_vlan.h>
-+#endif
-+
-+//#define VERSION "1.0"
-+
-+
-+typedef struct
-+{
-+ int32_t sdp; // segment data pointer
-+
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ u32 cown:1;
-+ u32 eor:1;
-+ u32 fsd:1;
-+ u32 lsd:1;
-+ u32 interrupt:1;
-+ u32 fr:1;
-+ u32 fp:1; // force priority
-+ u32 pri:3;
-+ u32 rsv_1:3; // reserve
-+ u32 ico:1;
-+ u32 uco:1;
-+ u32 tco:1;
-+ u32 sdl:16; // segment data length
-+
-+#else
-+ u32 sdl:16; // segment data length
-+ u32 tco:1;
-+ u32 uco:1;
-+ u32 ico:1;
-+ u32 rsv_1:3; // reserve
-+ u32 pri:3;
-+ u32 fp:1; // force priority
-+ u32 fr:1;
-+ u32 interrupt:1;
-+ u32 lsd:1;
-+ u32 fsd:1;
-+ u32 eor:1;
-+ u32 cown:1;
-+#endif
-+
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ u32 rsv_3:5;
-+ u32 fewan:1;
-+ u32 ewan:1;
-+ u32 mark:3;
-+ u32 pmap:5;
-+ u32 rsv_2:9;
-+ u32 dels:1;
-+ u32 inss:1;
-+ u32 sid:4;
-+ u32 stv:1;
-+ u32 ctv:1;
-+#else
-+ u32 ctv:1;
-+ u32 stv:1;
-+ u32 sid:4;
-+ u32 inss:1;
-+ u32 dels:1;
-+ u32 rsv_2:9;
-+ u32 pmap:5;
-+ u32 mark:3;
-+ u32 ewan:1;
-+ u32 fewan:1;
-+ u32 rsv_3:5;
-+#endif
-+
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ u32 s_pri:3;
-+ u32 s_dei:1;
-+ u32 s_vid:12;
-+ u32 c_pri:3;
-+ u32 c_cfs:1;
-+ u32 c_vid:12;
-+#else
-+ u32 c_vid:12;
-+ u32 c_cfs:1;
-+ u32 c_pri:3;
-+ u32 s_vid:12;
-+ u32 s_dei:1;
-+ u32 s_pri:3;
-+#endif
-+
-+ u8 alignment[16]; // for alignment 32 byte
-+
-+} __attribute__((packed)) TXDesc;
-+
-+typedef struct
-+{
-+ u32 sdp;
-+
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ u32 cown:1;
-+ u32 eor:1;
-+ u32 fsd:1;
-+ u32 lsd:1;
-+ u32 hr :6;
-+ u32 prot:4;
-+ u32 ipf:1;
-+ u32 l4f:1;
-+ u32 sdl:16;
-+#else
-+ u32 sdl:16;
-+ u32 l4f:1;
-+ u32 ipf:1;
-+ u32 prot:4;
-+ u32 hr :6;
-+ u32 lsd:1;
-+ u32 fsd:1;
-+ u32 eor:1;
-+ u32 cown:1;
-+#endif
-+
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ u32 rsv_3:11;
-+ u32 ip_offset:5;
-+ u32 rsv_2:1;
-+ u32 tc:2;
-+ u32 un_eth:1;
-+ u32 crc_err:1;
-+ u32 sp:3;
-+ u32 rsv_1:2;
-+ u32 e_wan:1;
-+ u32 exdv:1;
-+ u32 iwan:1;
-+ u32 unv:1;
-+ u32 stv:1;
-+ u32 ctv:1;
-+#else
-+ u32 ctv:1;
-+ u32 stv:1;
-+ u32 unv:1;
-+ u32 iwan:1;
-+ u32 exdv:1;
-+ u32 e_wan:1;
-+ u32 rsv_1:2;
-+ u32 sp:3;
-+ u32 crc_err:1;
-+ u32 un_eth:1;
-+ u32 tc:2;
-+ u32 rsv_2:1;
-+ u32 ip_offset:5;
-+ u32 rsv_3:11;
-+#endif
-+
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ u32 s_pri:3;
-+ u32 s_dei:1;
-+ u32 s_vid:12;
-+ u32 c_pri:3;
-+ u32 c_cfs:1;
-+ u32 c_vid:12;
-+#else
-+ u32 c_vid:12;
-+ u32 c_cfs:1;
-+ u32 c_pri:3;
-+ u32 s_vid:12;
-+ u32 s_dei:1;
-+ u32 s_pri:3;
-+#endif
-+
-+ u8 alignment[16]; // for alignment 32 byte
-+
-+} __attribute__((packed)) RXDesc;
-+
-+typedef struct {
-+ TXDesc *tx_desc;
-+ struct sk_buff *skb; // for free skb
-+ u32 pri;
-+ unsigned long j;
-+ unsigned long tx_index;
-+}TXBuffer;
-+
-+typedef struct {
-+ RXDesc *rx_desc;
-+ struct sk_buff *skb; // rx path need to fill some skb field, ex: length ...
-+#ifdef NCNB_TEST
-+ u32 ncnb_index;
-+#endif
-+}RXBuffer;
-+
-+
-+typedef struct {
-+ TXBuffer *head;
-+ TXDesc *tx_desc_head_vir_addr;
-+ dma_addr_t tx_desc_head_phy_addr;
-+ u32 cur_index; // for put send packet
-+ spinlock_t tx_lock;
-+ u32 non_free_tx_skb;
-+ u32 free_tx_skb_index;
-+ u32 ring_size;
-+ u32 max_ring_size;
-+}TXRing;
-+
-+
-+typedef struct {
-+ RXBuffer *head;
-+ RXDesc *rx_desc_head_vir_addr;
-+ dma_addr_t rx_desc_head_phy_addr;
-+ u32 cur_index;
-+ u32 ring_size;
-+ u32 max_ring_size;
-+}RXRing;
-+
-+#if 0
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ TXRing *tx_ring;
-+ RXRing *rx_ring;
-+}CNS3XXXRingStatus;
-+#endif
-+
-+
-+#define RX_RING0(priv) (priv->rx_ring[0])
-+#define TX_RING0(priv) (priv->tx_ring[0])
-+
-+
-+static inline u32 get_rx_ring_size(const RXRing *ring)
-+{
-+ //printk("rx ring->ring_size: %d\n", ring->ring_size);
-+ return ring->ring_size;
-+}
-+
-+static inline u32 get_tx_ring_size(TXRing *ring)
-+{
-+ //printk("tx ring->ring_size: %d\n", ring->ring_size);
-+ return ring->ring_size;
-+}
-+
-+static inline RXBuffer *get_rx_ring_head(const RXRing *rx_ring)
-+{
-+ return rx_ring->head;
-+}
-+
-+static inline TXBuffer *get_tx_ring_head(TXRing *tx_ring)
-+{
-+ return tx_ring->head;
-+}
-+
-+static inline RXBuffer *get_cur_rx_buffer(RXRing *rx_ring)
-+{
-+ return rx_ring->head + rx_ring->cur_index;
-+}
-+
-+static inline TXBuffer *get_cur_tx_buffer(TXRing *tx_ring)
-+{
-+ return tx_ring->head + tx_ring->cur_index;
-+}
-+
-+static inline u32 get_rx_head_phy_addr(RXRing *rx_ring)
-+{
-+ return rx_ring->rx_desc_head_phy_addr;
-+}
-+
-+static inline u32 get_tx_ring_head_phy_addr(TXRing *tx_ring)
-+{
-+ return tx_ring->tx_desc_head_phy_addr;
-+}
-+
-+
-+static inline u32 get_rx_cur_index(RXRing *rx_ring)
-+{
-+ return rx_ring->cur_index;
-+}
-+
-+static inline u32 get_tx_cur_index(TXRing *tx_ring)
-+{
-+ return tx_ring->cur_index;
-+}
-+
-+static inline u32 get_tx_cur_phy_addr(u8 ring_num)
-+{
-+ if (ring_num == 0)
-+ return TS_DESC_PTR0_REG;
-+ if (ring_num == 1)
-+ return TS_DESC_PTR1_REG;
-+ return 0; // fail
-+}
-+
-+static inline void rx_index_next(RXRing *ring)
-+{
-+ ring->cur_index = ((ring->cur_index + 1) % ring->ring_size);
-+}
-+static inline void tx_index_next(TXRing *ring)
-+{
-+ ring->cur_index = ((ring->cur_index + 1) % ring->ring_size);
-+}
-+
-+
-+
-+struct CNS3XXXPrivate_;
-+
-+typedef int (*RXFuncPtr)(struct sk_buff *skb, RXDesc*tx_desc_ptr, const struct CNS3XXXPrivate_* );
-+typedef int (*TXFuncPtr)(TXDesc*tx_desc_ptr, const struct CNS3XXXPrivate_*, struct sk_buff *);
-+typedef void (*OpenPtr)(void);
-+typedef void (*ClosePtr)(void);
-+
-+
-+// for ethtool set operate
-+typedef struct{
-+
-+}NICSetting;
-+
-+typedef struct{
-+ int pmap; // for port base, force route
-+ int is_wan; // mean the net device is WAN side.
-+ //u16 gid;
-+ u16 s_tag;
-+ //u8 mac_type; // VLAN base, or port base;
-+ u16 vlan_tag;
-+
-+ // do port base mode and vlan base mode work
-+ RXFuncPtr rx_func;
-+ TXFuncPtr tx_func;
-+ OpenPtr open;
-+ ClosePtr close;
-+ u8 which_port;
-+ //NICSetting *nic_setting;
-+ u8 *mac; // point to a mac address array
-+ VLANTableEntry *vlan_table_entry;
-+ ARLTableEntry *arl_table_entry;
-+ NICSetting *nic_setting;
-+ const char *name; // 16 bytes, reference include/linux/netdevice.h IFNAMSIZ
-+}NetDevicePriv;
-+
-+typedef struct
-+{
-+ u8 num_rx_queues;
-+ u8 num_tx_queues;
-+ TXRing *tx_ring;
-+ RXRing *rx_ring;
-+}RingInfo;
-+
-+
-+/* store this information for the driver.. */
-+typedef struct CNS3XXXPrivate_
-+{
-+ u8 num_rx_queues;
-+ u8 num_tx_queues;
-+ TXRing *tx_ring;
-+ RXRing *rx_ring;
-+ struct net_device_stats stats;
-+ spinlock_t lock;
-+ int pmap;
-+ int is_wan; // mean the net device is WAN side.
-+ u16 gid;
-+ u8 mac_type; // VLAN base, or port base;
-+ u16 vlan_tag;
-+ struct napi_struct napi;
-+ struct work_struct reset_task;
-+
-+ u8 which_port;
-+ //NICSetting *nic_setting;
-+ char name[IFNAMSIZ]; // 16 bytes, reference include/linux/netdevice.h IFNAMSIZ
-+
-+
-+ NetDevicePriv *net_device_priv;
-+ u8 ring_index;
-+
-+ u32 rx_s_vid[4096]; // record receive s vid (0x9100 ...)
-+ u32 rx_c_vid[4096]; // record receive c vid (0x8100 ...)
-+#ifdef CONFIG_CNS3XXX_NAPI
-+ volatile unsigned long is_qf; // determine rx ring queue full state
-+#endif
-+
-+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-+ struct vlan_group *vlgrp;
-+#endif
-+}CNS3XXXPrivate;
-+
-+
-+
-+
-+int rx_port_base(struct sk_buff *skb, RXDesc *rx_desc_ptr, const struct CNS3XXXPrivate_ *priv);
-+
-+int rx_vlan_base(struct sk_buff *skb, RXDesc *rx_desc_ptr, const struct CNS3XXXPrivate_ *priv);
-+
-+int tx_port_base(TXDesc *tx_desc_ptr, const struct CNS3XXXPrivate_ *priv, struct sk_buff *skb);
-+
-+
-+int tx_vlan_base(TXDesc *tx_desc_ptr, const struct CNS3XXXPrivate_ *priv, struct sk_buff *skb);
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+int fp_port_base(TXDesc *tx_desc_ptr, const struct CNS3XXXPrivate_ *priv, struct sk_buff *skb);
-+#endif
-+#endif
-+
---- /dev/null
-+++ b/drivers/net/cns3xxx/cns3xxx_main.c
-@@ -0,0 +1,3949 @@
-+/*******************************************************************************
-+ *
-+ * Copyright (c) 2009 Cavium Networks
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the Free
-+ * Software Foundation; either version 2 of the License, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program; if not, write to the Free Software Foundation, Inc., 59
-+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this distribution in the
-+ * file called LICENSE.
-+ *
-+ ********************************************************************************/
-+
-+#include <linux/module.h>
-+#include <mach/board.h>
-+#include <linux/platform_device.h>
-+#include "cns3xxx.h"
-+#include "cns3xxx_tool.h"
-+#include "cns3xxx_config.h"
-+
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+#include <linux/cns3xxx/sppe.h>
-+#define PACKET_REASON_TO_CPU (0x2C)
-+#endif
-+
-+#define RX_SDP_ALIGN 64
-+
-+#ifdef CONFIG_FPGA
-+#include "fpga.h"
-+#endif
-+
-+#ifdef CONFIG_VB
-+#include "vb.h"
-+#endif
-+
-+#define CPU_CACHE_BYTES 64
-+#define CPU_CACHE_ALIGN(X) (((X) + (CPU_CACHE_BYTES-1)) & ~(CPU_CACHE_BYTES-1))
-+
-+
-+#define QUEUE_WEIGHT_SET(port, ctl) \
-+{ \
-+ MAC##port##_PRI_CTRL_REG &= ~(0x3ffff); \
-+ MAC##port##_PRI_CTRL_REG |= (ctl.sch_mode << 16); \
-+ MAC##port##_PRI_CTRL_REG |= (ctl.q0_w); \
-+ MAC##port##_PRI_CTRL_REG |= (ctl.q1_w << 4); \
-+ MAC##port##_PRI_CTRL_REG |= (ctl.q2_w << 8); \
-+ MAC##port##_PRI_CTRL_REG |= (ctl.q3_w << 12); \
-+}
-+
-+#define QUEUE_WEIGHT_GET(port, ctl) \
-+{ \
-+ ctl.sch_mode = ((MAC##port##_PRI_CTRL_REG >> 16 ) & 0x3); \
-+ ctl.q0_w = ((MAC##port##_PRI_CTRL_REG >> 0 ) & 0x7); \
-+ ctl.q1_w = ((MAC##port##_PRI_CTRL_REG >> 4 ) & 0x7); \
-+ ctl.q2_w = ((MAC##port##_PRI_CTRL_REG >> 8 ) & 0x7); \
-+ ctl.q3_w = ((MAC##port##_PRI_CTRL_REG >> 12 ) & 0x7); \
-+}
-+
-+int cns3xxx_send_packet(struct sk_buff *skb, struct net_device *netdev);
-+static int install_isr_rc = 0;
-+static int rc_setup_rx_tx = 0; // rc means reference counting.
-+static struct net_device *intr_netdev;
-+struct net_device *net_dev_array[NETDEV_SIZE];
-+spinlock_t tx_lock;
-+spinlock_t rx_lock;
-+u8 fast_bridge_en=1;
-+u8 show_rx_proc=0;
-+u8 show_tx_proc=0;
-+
-+int init_port=7; // bit map 7 means port 0, 1 and 2, default is 7.
-+//module_param(init_port, u8, S_IRUGO);
-+module_param(init_port, int, 0);
-+
-+u8 ring_index=0; // 0 or 1
-+
-+#ifdef CNS3XXX_DELAYED_INTERRUPT
-+static u32 max_pend_int_cnt=MAX_PEND_INT_CNT, max_pend_time=MAX_PEND_TIME;
-+#endif
-+
-+#ifdef CONFIG_CNS3XXX_NAPI
-+struct net_device *napi_dev;
-+ #ifdef CNS3XXX_DOUBLE_RX_RING
-+ struct net_device *r1_napi_dev; // ring1 napi dev
-+ #endif
-+#endif
-+
-+const u32 MAX_RX_DESC_SIZE = 512;
-+const u32 MAX_TX_DESC_SIZE = 512;
-+const u32 RX_DESC_SIZE = 128;
-+//const u32 RX_DESC_SIZE = 5;
-+const u32 TX_DESC_SIZE = 120;
-+
-+//RXRing *rx_ring;
-+//TXRing *tx_ring;
-+
-+// only for debug (proc)
-+RingInfo g_ring_info;
-+
-+int MSG_LEVEL = NORMAL_MSG;
-+
-+#ifdef CNS3XXX_STATUS_ISR
-+const char *cns3xxx_gsw_status_tbl[] = {
-+ "\nMAC0_Q_FULL\n",
-+ "\nMAC1_Q_FULL\n",
-+ "\nCPU_Q_FULL\n",
-+ "\nHNAT_Q_FULL\n",
-+ "\nMAC2_Q_FULL\n",
-+ "\nMAC0_Q_EXT_FULL\n",
-+ "\nGLOBAL_Q_FULL\n",
-+ "\nBUFFER_FULL\n",
-+ "\nMIB_COUNTER_TH\n",
-+ "\n", // 9
-+ "\nMAC0_INTRUDER\n",
-+ "\nMAC1_INTRUDER\n",
-+ "\nCPU_INTRUDER\n",
-+ "\nMAC2_INTRUDER\n",
-+ "\nMAC0_STATUS_CHG\n",
-+ "\nMAC1_STATUS_CHG\n",
-+ "\nMAC2_STATUS_CHG\n",
-+ "\nMAC0_NO_LINK_DROP\n",
-+ "\nMAC1_NO_LINK_DROP\n",
-+ "\nMAC2_NO_LINK_DROP\n",
-+ "\nMAC0_RX_ERROR_DROP\n",
-+ "\nMAC1_RX_ERROR_DROP\n",
-+ "\nMAC2_RX_ERROR_DROP\n",
-+ "\nMAC0_NO_DESTINATION_DROP\n",
-+ "\nMAC1_NO_DESTINATION_DROP\n",
-+ "\nMAC2_NO_DESTINATION_DROP\n",
-+ "\nMAC0_RMC_PAUSE_DROP\n",
-+ "\nMAC1_RMC_PAUSE_DROP\n",
-+ "\nMAC2_RMC_PAUSE_DROP\n",
-+ "\nMAC0_LOCAL_DROP\n",
-+ "\nMAC1_LOCAL_DROP\n",
-+ "\nMAC2_LOCAL_DROP\n",
-+};
-+#endif
-+
-+#define MIN_PACKET_LEN 14
-+
-+void cns3xxx_write_pri_mask(u8 pri_mask);
-+
-+static int cns3xxx_notify_reboot(struct notifier_block *nb, unsigned long event, void *ptr);
-+
-+static struct notifier_block cns3xxx_notifier_reboot = {
-+ .notifier_call = cns3xxx_notify_reboot,
-+ .next = NULL,
-+ .priority = 0
-+};
-+
-+#if defined(CNS3XXX_VLAN_8021Q)
-+void cns3xxx_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid);
-+void cns3xxx_vlan_rx_register(struct net_device *dev, struct vlan_group *grp);
-+#endif
-+
-+void take_off_vlan_header(struct sk_buff *skb)
-+{
-+ // take off VLAN header
-+ memmove(skb->data + 4, skb->data, 12);
-+#if 0
-+ //skb_ptr->data += 4;
-+ skb_reserve(skb, 4);
-+#else
-+ skb->data += 4;
-+#endif
-+ skb->len -= 4; // minus 4 byte vlan tag
-+}
-+
-+int rx_port_base(struct sk_buff *skb, RXDesc *rx_desc_ptr, const struct CNS3XXXPrivate_ *priv)
-+{
-+ if (skb->data[12] == 0x81 && skb->data[13] == 0x00) // VLAN header
-+ {
-+ take_off_vlan_header(skb);
-+ print_packet(skb->data, skb->len);
-+ }
-+ return 0;
-+}
-+
-+int rx_vlan_base(struct sk_buff *skb, RXDesc *rx_desc_ptr, const struct CNS3XXXPrivate_ *priv)
-+{
-+ return 0;
-+}
-+
-+int tx_port_base(TXDesc *tx_desc_ptr, const struct CNS3XXXPrivate_ *priv, struct sk_buff *skb)
-+{
-+#if defined(CNS3XXX_VLAN_8021Q) && defined (CNS3XXX_8021Q_HW_TX)
-+ if (skb && priv->vlgrp != NULL && vlan_tx_tag_present(skb))
-+ {
-+ tx_desc_ptr->c_vid = cpu_to_le16(vlan_tx_tag_get(skb));
-+ tx_desc_ptr->ctv=1;
-+ tx_desc_ptr->fr = 0;
-+
-+ }
-+ else
-+#endif
-+ {
-+ tx_desc_ptr->ctv = 0;
-+ tx_desc_ptr->pmap = priv->net_device_priv->pmap;
-+ tx_desc_ptr->fr = 1;
-+ }
-+
-+ return 0;
-+}
-+
-+
-+int tx_vlan_base(TXDesc *tx_desc_ptr, const struct CNS3XXXPrivate_ *priv, struct sk_buff *skb)
-+{
-+#if defined(CNS3XXX_VLAN_8021Q)
-+
-+ if (skb && priv->vlgrp != NULL && vlan_tx_tag_present(skb)) {
-+ tx_desc_ptr->c_vid = cpu_to_le16(vlan_tx_tag_get(skb));
-+ }
-+#else
-+ tx_desc_ptr->c_vid = priv->net_device_priv->vlan_tag;
-+
-+#endif
-+ tx_desc_ptr->ctv=1;
-+ tx_desc_ptr->fr = 0;
-+
-+ return 0;
-+}
-+
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+int fp_port_base(TXDesc *tx_desc_ptr, const struct CNS3XXXPrivate_ *priv, struct sk_buff *skb)
-+{
-+#if 1
-+ tx_desc_ptr->fr = 1;
-+ tx_desc_ptr->pmap = 0x8;
-+#else
-+ tx_desc_ptr->fr = 0;
-+ tx_desc_ptr->ctv = 1;
-+ tx_desc_ptr->c_vid = 80;
-+#endif
-+ return 0;
-+}
-+#endif
-+
-+static inline struct sk_buff *cns3xxx_alloc_skb(void)
-+{
-+ struct sk_buff *skb;
-+ u32 align_64;
-+
-+ skb = dev_alloc_skb(MAX_PACKET_LEN + 2 + RX_SDP_ALIGN);
-+
-+ if (unlikely(!skb)) {
-+ return NULL;
-+ }
-+ pci_dma_sync_single_for_device(NULL, virt_to_phys(skb->data), MAX_PACKET_LEN+2+RX_SDP_ALIGN, PCI_DMA_FROMDEVICE);
-+
-+ align_64=CPU_CACHE_ALIGN((u32)skb->data);
-+ skb_reserve(skb, align_64-(u32)skb->data); /* 16 bytes alignment */
-+
-+#ifndef CNS3XXX_4N
-+ skb_reserve(skb, NET_IP_ALIGN); /* 16 bytes alignment */
-+#endif
-+
-+
-+
-+ return skb;
-+}
-+
-+static int free_rx_skb(RXRing *rx_ring)
-+{
-+ int i=0;
-+ RXBuffer *rx_buffer = rx_ring->head;
-+ //RXDesc *rx_desc = rx_ring.rx_desc_head_vir_addr;
-+
-+ for (i=0 ; i < get_rx_ring_size(rx_ring) ; ++i) {
-+ if (rx_buffer->rx_desc->cown==0 && rx_buffer->skb) {
-+ dev_kfree_skb(rx_buffer->skb);
-+ rx_buffer->skb=0;
-+ }
-+ }
-+ return 0;
-+}
-+
-+int cns3xxx_setup_all_rx_resources(RXRing *rx_ring, u8 ring_num)
-+{
-+ int i=0;
-+ RXBuffer *rx_buffer = 0;
-+ RXDesc *rx_desc = 0;
-+
-+#ifdef NCNB_TEST
-+ ncnb_buf = dma_alloc_coherent(NULL, 2*1024* get_rx_ring_size(rx_ring), &ncnb_buf_phy, GFP_KERNEL);
-+ printk("NCB_BUF: %08X PHY: %08X \n", ncnb_buf, ncnb_buf_phy);
-+
-+#endif
-+
-+ // alloc RXDesc array
-+ rx_ring->rx_desc_head_vir_addr = dma_alloc_coherent(NULL, sizeof(RXDesc) * (get_rx_ring_size(rx_ring)), &rx_ring->rx_desc_head_phy_addr, GFP_KERNEL);
-+ if (!rx_ring->rx_desc_head_vir_addr) {
-+ return -ENOMEM;
-+ }
-+
-+ memset(rx_ring->rx_desc_head_vir_addr, 0, sizeof(RXDesc) * get_rx_ring_size(rx_ring));
-+
-+ // alloc RXBuffer array
-+ rx_ring->head = kmalloc(sizeof(RXBuffer) * get_rx_ring_size(rx_ring), GFP_KERNEL);
-+
-+ if (!rx_ring->head) {
-+ return -ENOMEM;
-+ }
-+
-+ rx_buffer = rx_ring->head;
-+ for (i=0 ; i < get_rx_ring_size(rx_ring) ; ++i) {
-+ rx_buffer->skb=0;
-+ ++rx_buffer;
-+ }
-+
-+ rx_buffer = rx_ring->head;
-+ rx_desc = rx_ring->rx_desc_head_vir_addr;
-+ for (i=0 ; i < get_rx_ring_size(rx_ring) ; ++i, ++rx_buffer, ++rx_desc) {
-+ rx_buffer->rx_desc = rx_desc;
-+ rx_buffer->skb = cns3xxx_alloc_skb();
-+
-+ if (!rx_buffer->skb) {
-+
-+ free_rx_skb(rx_ring);
-+ kfree(rx_ring->head);
-+ dma_free_coherent(NULL, sizeof(RXDesc) * get_rx_ring_size(rx_ring), rx_ring->rx_desc_head_vir_addr, rx_ring->rx_desc_head_phy_addr);
-+ return -ENOMEM;
-+ }
-+
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ {
-+ RXDesc tmp_rx_desc;
-+
-+ memset(&tmp_rx_desc, 0, sizeof(RXDesc));
-+ tmp_rx_desc.sdp = (u32)virt_to_phys(rx_buffer->skb->data);
-+ tmp_rx_desc.sdl = MAX_PACKET_LEN;
-+ if (i == (get_rx_ring_size(rx_ring)-1) ){
-+ tmp_rx_desc.eor = 1;
-+ }
-+ tmp_rx_desc.fsd = 1;
-+ tmp_rx_desc.lsd = 1;
-+ swap_rx_desc(&tmp_rx_desc, rx_buffer->rx_desc);
-+ }
-+
-+#else
-+ rx_buffer->rx_desc->sdp = (u32)virt_to_phys(rx_buffer->skb->data);
-+ rx_buffer->rx_desc->sdl = MAX_PACKET_LEN;
-+ if (i == (get_rx_ring_size(rx_ring)-1) ){
-+ rx_buffer->rx_desc->eor = 1;
-+ }
-+ rx_buffer->rx_desc->fsd = 1;
-+ rx_buffer->rx_desc->lsd = 1;
-+#endif
-+
-+ }
-+ rx_ring->cur_index = 0 ;
-+
-+ if (ring_num == 0){
-+ FS_DESC_PTR0_REG = rx_ring->rx_desc_head_phy_addr;
-+ FS_DESC_BASE_ADDR0_REG = rx_ring->rx_desc_head_phy_addr;
-+
-+ } else if (ring_num == 1){
-+ FS_DESC_PTR1_REG = rx_ring->rx_desc_head_phy_addr;
-+ FS_DESC_BASE_ADDR1_REG = rx_ring->rx_desc_head_phy_addr;
-+ }
-+
-+ return CAVM_OK;
-+}
-+
-+static int cns3xxx_setup_all_tx_resources(TXRing *tx_ring, u8 ring_num)
-+{
-+ int i=0;
-+ TXBuffer *tx_buffer = 0;
-+ TXDesc *tx_desc = 0;
-+
-+
-+ spin_lock_init(&(tx_ring->tx_lock));
-+
-+ tx_ring->tx_desc_head_vir_addr = dma_alloc_coherent(NULL, sizeof(TXDesc) * get_tx_ring_size(tx_ring), &tx_ring->tx_desc_head_phy_addr, GFP_KERNEL);
-+ if (!tx_ring->tx_desc_head_vir_addr) {
-+ return -ENOMEM;
-+ }
-+
-+ memset(tx_ring->tx_desc_head_vir_addr, 0, sizeof(TXDesc) * get_tx_ring_size(tx_ring));
-+ tx_ring->head = kmalloc(sizeof(TXBuffer) * get_tx_ring_size(tx_ring), GFP_KERNEL);
-+
-+ tx_buffer = tx_ring->head;
-+ tx_desc = tx_ring->tx_desc_head_vir_addr;
-+ for (i=0 ; i < get_tx_ring_size(tx_ring) ; ++i, ++tx_buffer, ++tx_desc) {
-+ tx_buffer->tx_desc = tx_desc;
-+
-+ tx_buffer->tx_desc->cown = 1;
-+ tx_buffer->skb = 0;
-+ if (i == (get_tx_ring_size(tx_ring)-1) ){
-+ tx_buffer->tx_desc->eor = 1;
-+ }
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ swap_tx_desc(tx_buffer->tx_desc, tx_buffer->tx_desc);
-+#endif
-+
-+ }
-+
-+ tx_ring->cur_index = 0 ;
-+
-+ if (ring_num == 0){
-+ TS_DESC_PTR0_REG = tx_ring->tx_desc_head_phy_addr;
-+ TS_DESC_BASE_ADDR0_REG = tx_ring->tx_desc_head_phy_addr;
-+ } else if (ring_num == 1){
-+ TS_DESC_PTR1_REG = tx_ring->tx_desc_head_phy_addr;
-+ TS_DESC_BASE_ADDR1_REG = tx_ring->tx_desc_head_phy_addr;
-+ }
-+ return CAVM_OK;
-+}
-+
-+int cns3xxx_free_all_rx_resources(RXRing *rx_ring)
-+{
-+ free_rx_skb(rx_ring);
-+ kfree(rx_ring->head);
-+ dma_free_coherent(NULL, sizeof(RXDesc) * get_rx_ring_size(rx_ring), rx_ring->rx_desc_head_vir_addr, rx_ring->rx_desc_head_phy_addr);
-+ return 0;
-+}
-+
-+static int free_tx_skb(TXRing *tx_ring)
-+{
-+ int i=0;
-+ TXBuffer *tx_buffer = tx_ring->head;
-+
-+ for (i=0 ; i < get_tx_ring_size(tx_ring) ; ++i) {
-+ if (tx_buffer->skb) {
-+ dev_kfree_skb(tx_buffer->skb);
-+ tx_buffer->skb = 0;
-+ }
-+ }
-+ return 0;
-+}
-+
-+int cns3xxx_free_all_tx_resources(TXRing *tx_ring)
-+{
-+ free_tx_skb(tx_ring);
-+ kfree(tx_ring->head);
-+ dma_free_coherent(NULL, sizeof(TXDesc) * get_tx_ring_size(tx_ring), tx_ring->tx_desc_head_vir_addr, tx_ring->tx_desc_head_phy_addr);
-+ return 0;
-+}
-+
-+static int cns3xxx_free_rx_tx_res(CNS3XXXPrivate *priv)
-+{
-+ int i=0;
-+
-+ --rc_setup_rx_tx;
-+ if (rc_setup_rx_tx == 0) {
-+ enable_port(3, 0); // disable cpu port
-+
-+ // stop RX/TX ring0 dma
-+ enable_rx_dma(0, 0);
-+ enable_tx_dma(0, 0);
-+
-+ for (i=0 ; i < priv->num_rx_queues ; ++i) {
-+ cns3xxx_free_all_rx_resources(priv->rx_ring+i);
-+ memset(priv->rx_ring + i, 0, sizeof(RXRing));
-+ }
-+
-+ for (i=0 ; i < priv->num_tx_queues ; ++i) {
-+ cns3xxx_free_all_tx_resources(priv->tx_ring+i);
-+ memset(priv->tx_ring + i, 0, sizeof(TXRing));
-+ }
-+
-+ }
-+ return 0;
-+}
-+
-+
-+static int cns3xxx_setup_rx_tx_res(CNS3XXXPrivate *priv)
-+{
-+ int i=0;
-+
-+ if (rc_setup_rx_tx == 0) {
-+ clear_fs_dma_state(1);
-+ FS_DESC_PTR0_REG = 0;
-+ FS_DESC_BASE_ADDR0_REG = 0;
-+ FS_DESC_PTR1_REG = 0;
-+ FS_DESC_BASE_ADDR1_REG = 0;
-+ TS_DESC_PTR0_REG = 0;
-+ TS_DESC_BASE_ADDR0_REG = 0;
-+ TS_DESC_PTR1_REG = 0;
-+ TS_DESC_BASE_ADDR1_REG = 0;
-+
-+ for (i=0 ; i < priv->num_tx_queues ; ++i) {
-+ spin_lock_init(&((priv->tx_ring+i)->tx_lock));
-+ (priv->tx_ring+i)->max_ring_size = MAX_TX_DESC_SIZE;
-+ (priv->tx_ring+i)->ring_size = TX_DESC_SIZE;
-+ if (cns3xxx_setup_all_tx_resources(priv->tx_ring+i, i) != CAVM_OK)
-+ return CAVM_ERR;
-+ }
-+
-+ for (i=0 ; i < priv->num_rx_queues ; ++i) {
-+ (priv->rx_ring+i)->max_ring_size = MAX_RX_DESC_SIZE;
-+ (priv->rx_ring+i)->ring_size = RX_DESC_SIZE;
-+ if (cns3xxx_setup_all_rx_resources(priv->rx_ring+i, i) != CAVM_OK)
-+ return CAVM_ERR;
-+
-+ }
-+ clear_fs_dma_state(0);
-+ }
-+ ++rc_setup_rx_tx;
-+ return CAVM_OK;
-+}
-+
-+int free_tx_desc_skb(TXRing *tx_ring, u8 ring_num)
-+{
-+#if 1
-+ int i=0;
-+ //u32 tssd_current=0;
-+ TXBuffer *tx_buffer = 0;
-+ u32 tx_ring_size = get_tx_ring_size(tx_ring);
-+ // check curent hw index previous tx descriptor
-+ u32 cur_index = cns3xxx_get_tx_hw_index(ring_num) - 1;
-+
-+ tx_buffer = get_tx_buffer_by_index(tx_ring, cur_index);
-+
-+
-+ //while (1)
-+ for (i=0 ; i < tx_ring_size ; ++i) {
-+ if (tx_buffer->tx_desc->cown == 1 && tx_buffer->skb) {
-+ dev_kfree_skb_any(tx_buffer->skb);
-+ tx_buffer->skb=0;
-+ //tx_buffer->tx_desc->cown == 1;
-+ } else {
-+ break;
-+ }
-+ // --tx_desc_pair_ptr
-+ --cur_index;
-+ tx_buffer = get_tx_buffer_by_index(tx_ring, cur_index);
-+
-+ }
-+#endif
-+ return 0;
-+}
-+
-+void do_arl_lookup(void)
-+{
-+}
-+
-+inline void assign_netdev(RXBuffer volatile *rx_buffer)
-+{
-+ RXDesc * rx_desc=0;
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ RXDesc tmp_rx_desc;
-+ rx_desc = &tmp_rx_desc;
-+ swap_rx_desc(rx_buffer->rx_desc, rx_desc);
-+#else
-+ rx_desc = rx_buffer->rx_desc;
-+#endif
-+
-+
-+#if defined(CONFIG_CNS3XXX_PORT_BASE) || defined(CNS3XXX_VLAN_8021Q)
-+ // sp:
-+ // 0 - mac port 0
-+ // 1 - mac port 1
-+ // 4 - mac port 2
-+
-+ switch (rx_desc->sp)
-+ {
-+ case 0:
-+ {
-+ rx_buffer->skb->dev = PORT0_NETDEV;
-+ break;
-+ }
-+ case 1:
-+ {
-+ rx_buffer->skb->dev = PORT1_NETDEV;
-+ break;
-+ }
-+ case 4:
-+ {
-+ rx_buffer->skb->dev = PORT2_NETDEV;
-+ break;
-+ }
-+
-+ }
-+#endif
-+
-+#ifdef CONFIG_CNS3XXX_VLAN_BASE
-+{
-+ u16 vlan_tag;
-+
-+ vlan_tag = rx_desc->c_vid;
-+ rx_buffer->skb->dev = net_dev_array[vlan_tag];
-+
-+}
-+#endif
-+
-+}
-+
-+#if defined(CNS3XXX_VLAN_8021Q)
-+static int cns3xxx_vlan_rx(CNS3XXXPrivate *priv, struct sk_buff *skb, u16 vlan_tag)
-+{
-+ return vlan_hwaccel_receive_skb(skb, priv->vlgrp, vlan_tag);
-+}
-+#endif
-+
-+// old_priv has ring index information, current version only uses the information.
-+static int cns3xxx_get_rfd_buff(RXBuffer volatile *rx_buffer, CNS3XXXPrivate *old_priv)
-+{
-+ CNS3XXXPrivate *priv=0;
-+ //RXDesc volatile *rxdesc_ptr = rx_buffer->rx_desc;
-+ struct sk_buff *skb;
-+ //unsigned char *data;
-+ u32 len;
-+ RXDesc *rx_desc;
-+
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+
-+ RXDesc tmp_rx_desc;
-+
-+ rx_desc = &tmp_rx_desc;
-+ swap_rx_desc(rx_buffer->rx_desc, rx_desc);
-+
-+#else
-+ rx_desc = rx_buffer->rx_desc;
-+#endif
-+
-+ //rxdesc_ptr = rxring.vir_addr + index;
-+ skb = rx_buffer->skb;
-+ len = rx_desc->sdl;
-+
-+
-+#ifdef DEBUG_RX
-+ if (MSG_LEVEL == DUMP_RX_PKT_INFO) {
-+ print_packet(skb->data, len);
-+ }
-+
-+#endif
-+
-+ pci_dma_sync_single_for_device(NULL, virt_to_phys(skb->data), len, PCI_DMA_FROMDEVICE);
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+ if (PACKET_REASON_TO_CPU == rx_buffer->rx_desc->hr) {
-+ if (sppe_pci_fp_ready) {
-+ SPPE_PARAM param;
-+ int pci_dev_index;
-+ struct iphdr *iph;
-+
-+ skb_put(skb, len);
-+ iph = (struct iphdr *)(skb->data + sizeof(struct ethhdr));
-+
-+ memset(¶m, 0, sizeof(SPPE_PARAM));
-+ param.cmd = SPPE_CMD_ARP;
-+ param.op = SPPE_OP_GET;
-+ param.data.sppe_arp.ip[0] = iph->daddr;
-+ if (SPPE_RESULT_SUCCESS != sppe_func_hook(¶m)) {
-+ goto NOT_IN_PCI_FP;
-+ } else {
-+ pci_dev_index = param.data.sppe_arp.unused_1;
-+ }
-+ param.cmd = SPPE_CMD_PCI_FP_DEV;
-+ param.op = SPPE_OP_GET;
-+ param.data.sppe_pci_fp_dev.dev = NULL;
-+ param.data.sppe_pci_fp_dev.index = pci_dev_index;
-+ if (SPPE_RESULT_SUCCESS != sppe_pci_fp_hook(¶m)) {
-+ goto NOT_IN_PCI_FP;
-+ } else {
-+ skb->dev = param.data.sppe_pci_fp_dev.dev;
-+ }
-+ #if 1
-+ dev_queue_xmit(skb);
-+ #else
-+ skb->dev->hard_start_xmit(skb, skb->dev);
-+ #endif
-+
-+ return 0;
-+ }
-+ }
-+NOT_IN_PCI_FP:
-+#endif
-+
-+#ifdef CNS3XXX_NON_NIC_MODE_8021Q
-+ if (cns3xxx_is_untag_packet(rx_desc) == 1)
-+ take_off_vlan_header(skb);
-+#endif
-+
-+#ifdef CONFIG_CNS3XXX_PORT_BASE
-+ assign_netdev(rx_buffer);
-+
-+ if (rx_buffer->skb->dev) // if skb->dev is 0, means VLAN base
-+ goto determine_dev_ok;
-+
-+#endif /* CONFIG_CNS3XXX_PORT_BASE */
-+
-+
-+#ifdef CONFIG_CNS3XXX_VLAN_BASE
-+
-+#ifdef CONFIG_HAVE_VLAN_TAG
-+
-+#if defined(CNS3XXX_VLAN_8021Q)
-+ // some funcion need netdev like eth_type_trans(), so need to assign it.
-+ skb->dev = intr_netdev;
-+ // 8021Q module will determine right netdev by vlan tag.
-+#else // defined(CNS3XXX_VLAN_8021Q)
-+ {
-+ assign_netdev(rx_buffer);
-+
-+ take_off_vlan_header(skb);
-+ if (MSG_LEVEL == 5)
-+ print_packet(skb->data, 32);
-+
-+ if ( rx_buffer->skb->dev == 0){
-+ goto freepacket;
-+ }
-+ }
-+
-+#endif // CNS3XXX_VLAN_8021Q
-+
-+#else /* CONFIG_HAVE_VLAN_TAG */
-+
-+#ifdef CNS3XXX_RX_DESC_VLAN_INFO
-+// get VLAN information by RX descriptor field
-+
-+#endif
-+
-+#endif // CONFIG_HAVE_VLAN_TAG
-+
-+#endif // CONFIG_CNS3XXX_VLAN_BASE
-+
-+
-+#ifdef CONFIG_CNS3XXX_PORT_BASE
-+determine_dev_ok:
-+#endif
-+
-+ skb_put(skb, len);
-+
-+ if (skb->dev) {
-+ priv = netdev_priv(skb->dev);
-+ }
-+ else{
-+ DEBUG_MSG(WARNING_MSG, "skb_ptr->dev==NULL\n");
-+ goto freepacket;
-+ }
-+
-+#ifdef CNS3XXX_RX_HW_CHECKSUM
-+ switch (rx_desc->prot)
-+ {
-+ case 1 :
-+ case 2 :
-+ case 5 :
-+ case 6 :
-+ {
-+ if ( rx_desc->l4f == 0) { // tcp/udp checksum is correct
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+ } else {
-+ skb->ip_summed = CHECKSUM_NONE;
-+ }
-+ break;
-+ }
-+ default:
-+ {
-+ skb->ip_summed = CHECKSUM_NONE;
-+ break;
-+ }
-+ }
-+#else
-+ skb->ip_summed = CHECKSUM_NONE;
-+#endif // CNS3XXX_RX_HW_CHECKSUM
-+
-+
-+ // this line must, if no, packet will not send to network layer
-+#ifdef CONFIG_FAST_BRIDGE
-+ if (fast_bridge_en == 0)
-+#endif
-+ skb->protocol = eth_type_trans(skb, skb->dev);
-+
-+ skb->dev->last_rx = jiffies;
-+ priv->stats.rx_packets++;
-+ priv->stats.rx_bytes += len;
-+
-+#ifdef CONFIG_FAST_BRIDGE
-+ if (fast_bridge_en == 1) {
-+
-+ skb->ip_summed = CHECKSUM_NONE;
-+ if ( skb->dev == PORT0_NETDEV) {
-+ skb->dev = PORT1_NETDEV;
-+ } else if ( skb->dev == PORT1_NETDEV) {
-+ skb->dev = PORT0_NETDEV;
-+ }
-+ //skb->dev->hard_start_xmit(skb, skb->dev);
-+ cns3xxx_send_packet(skb, skb->dev);
-+ } else {
-+#endif // #ifdef CONFIG_FAST_BRIDGE
-+
-+
-+//#if defined(CNS3XXX_VLAN_8021Q)
-+#if 0
-+ if (priv->vlgrp != NULL)
-+ {
-+ //cns3xxx_vlan_rx(priv, skb, rx_buffer->rx_desc->c_vid);
-+ cns3xxx_vlan_rx(priv, skb, rx_buffer->rx_desc->c_vid);
-+ //cns3xxx_vlan_rx(priv, skb, swab16(le32_to_cpu(rx_buffer->rx_desc->c_vid)) );
-+ }
-+ else
-+#else
-+ #ifdef CONFIG_CNS3XXX_NAPI
-+ netif_receive_skb(skb);
-+ #else
-+ netif_rx(skb);
-+ #endif
-+#endif
-+
-+#ifdef CONFIG_FAST_BRIDGE
-+ }
-+#endif
-+
-+ //vlan_hwaccel_receive_skb(skb, priv->vlgrp, 1);
-+
-+ return 0;
-+
-+freepacket:
-+ //DEBUG_MSG(NORMAL_MSG, "freepacket\n");
-+ dev_kfree_skb_any(skb);
-+ return 0;
-+}
-+
-+// index from 1
-+inline u32 get_rx_hw_index(CNS3XXXPrivate *priv)
-+{
-+ return ((FS_DESC_PTR0_REG - get_rx_head_phy_addr(&RX_RING0(priv))) / sizeof(RXDesc) );
-+}
-+
-+inline int get_rx_hw_index_by_reg(u8 ring_num)
-+{
-+ if (ring_num == 0 ) {
-+ return ((FS_DESC_PTR0_REG - FS_DESC_BASE_ADDR0_REG) / sizeof(RXDesc) );
-+ } else if (ring_num == 1 ) {
-+ return ((FS_DESC_PTR1_REG - FS_DESC_BASE_ADDR1_REG) / sizeof(RXDesc) );
-+ }
-+
-+ return CAVM_FAIL;
-+}
-+
-+void dump_rxring(void)
-+{
-+ int j=0;
-+ RXBuffer *rx_buffer = 0;
-+
-+ rx_buffer = get_rx_ring_head(g_ring_info.rx_ring+0);
-+ for (j=0 ; j < get_rx_ring_size(g_ring_info.rx_ring+0); ++j, ++rx_buffer) {
-+ printk("[%d] ## rx_buffer->rx_desc->cown: %d\n", j, rx_buffer->rx_desc->cown);
-+ }
-+}
-+
-+#ifdef CONFIG_CNS3XXX_NAPI
-+void cns3xxx_receive_packet(CNS3XXXPrivate *priv, int mode, int *work_done, int work_to_do)
-+#else
-+void cns3xxx_receive_packet(CNS3XXXPrivate *priv, int mode)
-+#endif
-+{
-+ int fssd_index;
-+ //int fssd_current;
-+ RXBuffer volatile *rx_buffer = 0;
-+ RXDesc volatile *rx_desc=0;
-+ struct sk_buff *skb;
-+#ifndef CONFIG_CNS3XXX_NAPI
-+ int fsqf = 0; // Queue Full Mode =0
-+#endif
-+ int i, rxcount = 0;
-+ u8 queue_index = priv->ring_index;
-+
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ RXDesc tmp_rx_desc;
-+#endif
-+
-+ rx_buffer = get_cur_rx_buffer(&(priv->rx_ring[queue_index]));
-+
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ rx_desc = &tmp_rx_desc;
-+ swap_rx_desc(rx_buffer->rx_desc, rx_desc);
-+#else
-+ rx_desc = rx_buffer->rx_desc;
-+#endif
-+
-+ fssd_index = get_rx_hw_index_by_reg(queue_index);
-+
-+ if (fssd_index > get_rx_cur_index(&priv->rx_ring[queue_index]) ) {
-+ rxcount = fssd_index - get_rx_cur_index(&priv->rx_ring[queue_index]);
-+ } else if (fssd_index < get_rx_cur_index(&priv->rx_ring[queue_index])) {
-+ rxcount = (get_rx_ring_size(&priv->rx_ring[queue_index]) - get_rx_cur_index(&priv->rx_ring[queue_index]) ) + fssd_index;
-+ } else { // fssd_index == rxring.cur_index
-+ if (rx_desc->cown == 0) { // if rx_desc->cown is 1, we can receive the RX descriptor.
-+ enable_rx_dma(0, 1);
-+ goto receive_packet_exit;
-+ } else {
-+ // Queue Full
-+#ifndef CONFIG_CNS3XXX_NAPI
-+ fsqf = 1;
-+#endif
-+ rxcount = get_rx_ring_size(&priv->rx_ring[queue_index]);
-+ }
-+ }
-+#ifndef CONFIG_CNS3XXX_NAPI
-+ if (mode == 1) {
-+ fsqf = 1;
-+ rxcount = get_rx_ring_size(&priv->rx_ring[queue_index]);
-+ }
-+#endif
-+
-+#ifdef CNS3XXX_FREE_TX_IN_RX_PATH
-+ free_tx_desc_skb(priv->tx_ring + 0, 0);
-+#ifdef CNS3XXX_DOUBLE_TX_RING
-+ free_tx_desc_skb(priv->tx_ring + 1, 1);
-+#endif
-+#endif
-+
-+ for (i = 0; i < rxcount; i++) {
-+
-+ if (rx_desc->cown != 0) { // start to get packet
-+ // Alloc New skb_buff
-+ skb = cns3xxx_alloc_skb();
-+ // Check skb_buff
-+ if (skb) {
-+ cns3xxx_get_rfd_buff(rx_buffer, priv);
-+ rx_buffer->skb = skb;
-+#ifndef NCNB_TEST
-+ rx_desc->sdp = (u32)virt_to_phys(skb->data);
-+#endif
-+ rx_desc->sdl = MAX_PACKET_LEN;
-+ rx_desc->fsd = 1;
-+ rx_desc->lsd = 1;
-+ rx_desc->cown = 0; // set cbit to 0
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ swap_rx_desc(rx_desc, rx_buffer->rx_desc);
-+#endif
-+
-+#ifdef CONFIG_CNS3XXX_NAPI
-+ ++(*work_done);
-+ if (*work_done >= work_to_do) {
-+
-+ rx_index_next(&priv->rx_ring[queue_index]); // rx_ring.cur_index points to next
-+ rx_buffer = get_cur_rx_buffer(&priv->rx_ring[queue_index]);
-+ rx_desc = rx_buffer->rx_desc;
-+ break;
-+ }
-+#endif
-+
-+ } else {
-+ // I will add dev->lp.stats->rx_dropped, it will effect the performance
-+ //PDEBUG("%s: Alloc sk_buff fail, reuse the buffer\n", __FUNCTION__);
-+ rx_desc->cown = 0; // set cbit to 0
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ swap_rx_desc(rx_desc, rx_buffer->rx_desc);
-+#endif
-+
-+ return;
-+ }
-+ } else { // cown is 0, no packets
-+ //*work_done = 0;
-+ return;
-+ }
-+
-+
-+ rx_index_next(&priv->rx_ring[queue_index]); // rx_ring.cur_index points to next
-+ rx_buffer = get_cur_rx_buffer(&priv->rx_ring[queue_index]);
-+ rx_desc = rx_buffer->rx_desc;
-+
-+ } // end for (i = 0; i < rxcount; i++)
-+
-+
-+#ifndef CONFIG_CNS3XXX_NAPI
-+ if (fsqf) {
-+ priv->rx_ring[queue_index].cur_index = fssd_index;
-+ mb();
-+ enable_rx_dma(0, 1);
-+ }
-+#endif
-+
-+
-+ //spin_unlock(&rx_lock);
-+receive_packet_exit:
-+ return;
-+}
-+
-+irqreturn_t cns3xxx_fsrc_ring0_isr(int irq, void *dev_id)
-+{
-+ struct net_device *netdev = dev_id;
-+ CNS3XXXPrivate *priv = netdev_priv(netdev);
-+
-+ priv->ring_index=0;
-+
-+#ifdef CONFIG_CNS3XXX_NAPI
-+{
-+ CNS3XXXPrivate *priv = netdev_priv(napi_dev);
-+ priv->ring_index=0;
-+
-+#ifdef CNS3XXX_USE_MASK
-+ cns3xxx_write_pri_mask(0xb0);
-+#else
-+ cns3xxx_disable_irq(FSRC_RING0_INTERRUPT_ID);
-+#endif
-+
-+ //if (likely(netif_rx_schedule_prep(napi_dev, &priv->napi))) {
-+ if (likely(napi_schedule_prep(&priv->napi))) {
-+ //__netif_rx_schedule(napi_dev, &priv->napi);
-+ __napi_schedule(&priv->napi);
-+ } else {
-+#ifdef CNS3XXX_USE_MASK
-+ cns3xxx_write_pri_mask(0xf0);
-+#else
-+ cns3xxx_enable_irq(FSRC_RING0_INTERRUPT_ID);
-+#endif
-+ }
-+}
-+#else // !CONFIG_CNS3XXX_NAPI
-+
-+#ifdef CNS3XXX_USE_MASK
-+ cns3xxx_write_pri_mask(0xb0);
-+#else
-+ cns3xxx_disable_irq(FSRC_RING0_INTERRUPT_ID);
-+ cns3xxx_disable_irq(FSQF_RING0_INTERRUPT_ID);
-+#endif
-+
-+ cns3xxx_receive_packet(priv, 0); // Receive Once
-+
-+#ifdef CNS3XXX_USE_MASK
-+ cns3xxx_write_pri_mask(0xf0);
-+#else
-+ cns3xxx_enable_irq(FSRC_RING0_INTERRUPT_ID);
-+ cns3xxx_enable_irq(FSQF_RING0_INTERRUPT_ID);
-+#endif
-+ enable_rx_dma(0, 1);
-+#endif
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+#if defined(CNS3XXX_DOUBLE_RX_RING)
-+irqreturn_t cns3xxx_fsrc_ring1_isr(int irq, void *dev_id)
-+{
-+ struct net_device *netdev = dev_id;
-+ CNS3XXXPrivate *priv = netdev_priv(netdev);
-+ priv->ring_index=1;
-+
-+
-+#if defined(CONFIG_CNS3XXX_NAPI) && defined(CNS3XXX_DOUBLE_RX_RING)
-+{
-+ CNS3XXXPrivate *priv = netdev_priv(r1_napi_dev);
-+ priv->ring_index=1;
-+
-+ cns3xxx_disable_irq(FSRC_RING1_INTERRUPT_ID);
-+
-+ if (likely(napi_schedule_prep(&priv->napi))) {
-+ __napi_schedule(&priv->napi);
-+ } else {
-+ cns3xxx_enable_irq(FSRC_RING1_INTERRUPT_ID);
-+ }
-+}
-+#else
-+
-+ cns3xxx_disable_irq(CNS3XXX_FSRC_RING1_INTERRUPT_ID);
-+ cns3xxx_disable_irq(CNS3XXX_FSQF_RING1_INTERRUPT_ID);
-+ cns3xxx_receive_packet(priv, 0); // Receive Once
-+ enable_rx_dma(1, 1);
-+
-+ cns3xxx_enable_irq(CNS3XXX_FSRC_RING1_INTERRUPT_ID);
-+ cns3xxx_enable_irq(CNS3XXX_FSQF_RING1_INTERRUPT_ID);
-+#endif
-+
-+ return IRQ_HANDLED;
-+}
-+#endif
-+
-+int cns3xxx_check_enough_tx_descriptor(TXRing *tx_ring, int need_free_tx_desc)
-+{
-+#if 1
-+ int i=0;
-+ TXDesc *tx_desc=0;
-+ u32 cur_index = get_tx_cur_index(tx_ring);
-+ TXBuffer *tx_buffer = get_tx_buffer_by_index(tx_ring, cur_index);
-+
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ TXDesc tmp_tx_desc;
-+ tx_desc = &tmp_tx_desc;
-+ swap_tx_desc(tx_buffer->tx_desc, tx_desc);
-+#else
-+ tx_desc = tx_buffer->tx_desc;
-+#endif
-+
-+
-+ for (i=0 ; i < need_free_tx_desc ; ++i) {
-+ if ( tx_desc->cown == 0 ) {
-+ return 0; // no free TX descriptor
-+ }
-+ tx_buffer = get_tx_buffer_by_index(tx_ring, ++cur_index);
-+ }
-+#endif
-+ return 1;
-+}
-+
-+// if return CAVM_ERR, means pad is fail, the packet cannot send by switch.
-+
-+int fill_a_skb_to_tx_desc(TXBuffer * tx_buffer, u8 *data, int len, struct sk_buff *skb, const struct CNS3XXXPrivate_ *priv, int sg, int fsd, int lsd)
-+{
-+ //TXDesc *tx_desc_ptr = tx_buffer->tx_desc;
-+ static int tt=0;
-+
-+ TXDesc *tx_desc_ptr = 0;
-+#ifdef CONFIG_SWTICH_BIG_ENDIAN
-+ TXDesc tmp_tx_desc;
-+ tx_desc_ptr = &tmp_tx_desc;
-+ swap_tx_desc(tx_buffer->tx_desc, tx_desc_ptr);
-+#else
-+ tx_desc_ptr = tx_buffer->tx_desc;
-+#endif
-+
-+
-+
-+ if (tx_buffer->skb) {
-+ dev_kfree_skb_any(tx_buffer->skb);
-+ tx_buffer->skb = 0 ;
-+ } else {
-+ //++tx_ring.non_free_tx_skb;
-+ }
-+
-+ tx_buffer->skb = skb; /* for free skb */
-+ tx_desc_ptr->sdp = virt_to_phys(data);
-+ tx_buffer->j = tt;
-+ tx_buffer->tx_index = cns3xxx_get_tx_hw_index(0);
-+ ++tt;
-+
-+#if 0
-+ {
-+ static u16 previous_sn_num=10;
-+ u16 sn_num=0;
-+ u16 e_type=0;
-+
-+ memcpy(&e_type, skb->data + 12, 2);
-+ e_type = be16_to_cpu(e_type);
-+
-+ if (e_type == 0x0800) {
-+ memcpy(&sn_num, skb->data + 0x28, 2);
-+ sn_num = be16_to_cpu(sn_num);
-+
-+ if ( previous_sn_num == sn_num)
-+ printk("dup\n");
-+
-+ previous_sn_num = sn_num;
-+ }
-+
-+ }
-+#endif
-+
-+
-+#ifdef CNS3XXX_TX_HW_CHECKSUM
-+ tx_desc_ptr->ico = 1;
-+ tx_desc_ptr->uco = 1;
-+ tx_desc_ptr->tco = 1;
-+#else
-+ tx_desc_ptr->ico = 0;
-+ tx_desc_ptr->uco = 0;
-+ tx_desc_ptr->tco = 0;
-+#endif
-+ // Wake interrupt
-+#ifdef CNS3XXX_TSTC_RING0_ISR
-+ tx_desc_ptr->interrupt = 1;
-+#else
-+ tx_desc_ptr->interrupt = 0;
-+#endif
-+
-+ /* fill 0 to MIN_PACKET_LEN size */
-+ // can change MIN_PACKET_LEN to 14
-+ if (sg==0 && len < MIN_PACKET_LEN) {
-+ if (skb_padto(skb, MIN_PACKET_LEN))
-+ return CAVM_ERR;
-+
-+ //memset(skb->data + len, 0, MIN_PACKET_LEN - len);
-+ //skb->len = MIN_PACKET_LEN;
-+ tx_desc_ptr->sdl = MIN_PACKET_LEN;
-+ } else {
-+ tx_desc_ptr->sdl = len;
-+ }
-+
-+ dma_cache_maint(data, tx_desc_ptr->sdl, PCI_DMA_TODEVICE);
-+
-+ /* VLAN base or port base function to set TX descriptor */
-+ /* reference: tx_//port_base(), tx_vlan_base() */
-+ priv->net_device_priv->tx_func(tx_desc_ptr, priv, skb);
-+ tx_desc_ptr->fsd = fsd;
-+ tx_desc_ptr->lsd = lsd;
-+
-+ /* NOT SG packet */
-+ if( fsd == 1 && lsd == 1)
-+ tx_desc_ptr->cown = 0;
-+
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+ swap_tx_desc(tx_desc_ptr, tx_buffer->tx_desc);
-+#endif
-+
-+ return CAVM_OK;
-+}
-+
-+int cns3xxx_send_packet(struct sk_buff *skb, struct net_device *netdev)
-+{
-+
-+ CNS3XXXPrivate *priv = netdev_priv(netdev);
-+ TXBuffer *tx_buffer = 0;
-+ unsigned long flags;
-+ int nr_frags =skb_shinfo(skb)->nr_frags;
-+
-+ TXDesc *tx_desc[10]; // FIXME: ensure to maximum sg size
-+ int tx_desc_count=0;
-+ int i=0;
-+
-+#ifdef DEBUG_TX
-+ if (MSG_LEVEL == DUMP_TX_PKT_INFO) {
-+ print_packet(tx_buffer->skb->data, tx_buffer->tx_desc->sdl);
-+ //dump_tx_desc(tx_buffer->tx_desc);
-+ }
-+#endif
-+
-+ spin_lock_irqsave(&tx_lock, flags);
-+
-+ if (cns3xxx_check_enough_tx_descriptor(priv->tx_ring + ring_index, (nr_frags==0 ) ? 1 : nr_frags) == 0) {
-+ // no enough tx descriptor
-+ spin_unlock_irqrestore(&tx_lock, flags);
-+ // re-queue the skb
-+ return NETDEV_TX_BUSY;
-+ }
-+
-+ tx_buffer = get_cur_tx_buffer(priv->tx_ring + ring_index);
-+
-+ if (nr_frags == 0) { // non scatter/gather I/O
-+
-+ fill_a_skb_to_tx_desc(tx_buffer, skb->data, skb->len, skb, priv, 0, 1, 1);
-+
-+ tx_index_next(priv->tx_ring + ring_index);
-+
-+ } else { // scatter/gather I/O
-+ struct skb_frag_struct *frag = 0;
-+
-+
-+ fill_a_skb_to_tx_desc(tx_buffer, skb->data, skb->len - skb->data_len, 0, priv, 1, 1, 0);
-+ tx_desc[tx_desc_count++] = tx_buffer->tx_desc;
-+ tx_index_next(priv->tx_ring + ring_index);
-+ tx_buffer = get_cur_tx_buffer(priv->tx_ring + ring_index);
-+
-+ for (i=0 ; i < nr_frags-1 ; ++i) {
-+ frag = &skb_shinfo(skb)->frags[i];
-+
-+ fill_a_skb_to_tx_desc(tx_buffer, page_address(frag->page) + frag->page_offset, frag->size, 0, priv, 1, 0, 0);
-+ tx_desc[tx_desc_count++] = tx_buffer->tx_desc;
-+
-+ tx_index_next(priv->tx_ring + ring_index);
-+ tx_buffer = get_cur_tx_buffer(priv->tx_ring + ring_index);
-+ }
-+ frag = &skb_shinfo(skb)->frags[nr_frags-1];
-+
-+ // last fragment
-+ fill_a_skb_to_tx_desc(tx_buffer, page_address(frag->page) + frag->page_offset, frag->size, skb, priv, 1, 0, 1);
-+ tx_desc[tx_desc_count++] = tx_buffer->tx_desc;
-+
-+ tx_index_next(priv->tx_ring + ring_index);
-+ tx_buffer = get_cur_tx_buffer(priv->tx_ring + ring_index);
-+ }
-+
-+
-+ if( nr_frags != 0) {
-+
-+ for (i = 0; i < tx_desc_count ; i++ )
-+ tx_desc[i]->cown = 0 ;
-+ }
-+
-+ mb();
-+ enable_tx_dma(ring_index, 1);
-+
-+ priv->stats.tx_packets++;
-+ priv->stats.tx_bytes += skb->len;
-+ netdev->trans_start = jiffies;
-+
-+ spin_unlock_irqrestore(&tx_lock, flags);
-+ return NETDEV_TX_OK;
-+}
-+
-+
-+#ifdef CNS3XXX_FSQF_RING0_ISR
-+irqreturn_t cns3xxx_fsqf_ring0_isr(int irq, void *dev_id)
-+{
-+#ifndef CONFIG_CNS3XXX_NAPI
-+ struct net_device *netdev = dev_id;
-+ CNS3XXXPrivate *priv = netdev_priv(netdev);
-+#endif
-+
-+#ifdef CONFIG_CNS3XXX_NAPI
-+{
-+ CNS3XXXPrivate *priv = netdev_priv(napi_dev);
-+ // because in normal state, fsql only invoke once and set_bit is atomic function.
-+ // so I don't mask it.
-+ set_bit(0, &priv->is_qf);
-+}
-+#else
-+#ifdef CNS3XXX_USE_MASK
-+ cns3xxx_write_pri_mask(0xb0);
-+#else
-+ cns3xxx_disable_irq(FSRC_RING0_INTERRUPT_ID);
-+ cns3xxx_disable_irq(FSQF_RING0_INTERRUPT_ID);
-+#endif
-+
-+
-+ cns3xxx_receive_packet(priv, 1); // Receive at Queue Full Mode
-+
-+#ifdef CNS3XXX_USE_MASK
-+ cns3xxx_write_pri_mask(0xf0);
-+#else
-+ cns3xxx_enable_irq(FSRC_RING0_INTERRUPT_ID);
-+ cns3xxx_enable_irq(FSQF_RING0_INTERRUPT_ID);
-+#endif
-+
-+ enable_rx_dma(0, 1);
-+#endif // CONFIG_CNS3XXX_NAPI
-+
-+ return IRQ_HANDLED;
-+}
-+#endif
-+
-+
-+#if defined(CNS3XXX_DOUBLE_RX_RING)
-+#ifdef CNS3XXX_FSQF_RING1_ISR
-+irqreturn_t cns3xxx_fsqf_ring1_isr(int irq, void *dev_id)
-+{
-+ struct net_device *netdev = dev_id;
-+ CNS3XXXPrivate *priv = netdev_priv(netdev);
-+ //INTC_CLEAR_EDGE_TRIGGER_INTERRUPT(INTC_GSW_FSQF_BIT_INDEX);
-+
-+#ifdef CONFIG_CNS3XXX_NAPI
-+{
-+ CNS3XXXPrivate *priv = netdev_priv(r1_napi_dev);
-+ // because in normal state, fsqf only invoke once and set_bit is atomic function.
-+ // so don't mask it.
-+ set_bit(0, &priv->is_qf);
-+}
-+#else
-+ cns3xxx_disable_irq(FSRC_RING1_INTERRUPT_ID);
-+ cns3xxx_disable_irq(FSQF_RING1_INTERRUPT_ID);
-+
-+ cns3xxx_receive_packet(priv, 1); // Receive at Queue Full Mode
-+ enable_rx_dma(1, 1);
-+
-+ cns3xxx_enable_irq(FSRC_RING1_INTERRUPT_ID);
-+ cns3xxx_enable_irq(FSQF_RING1_INTERRUPT_ID);
-+#endif
-+ return IRQ_HANDLED;
-+}
-+#endif
-+#endif //#if defined(CNS3XXX_DOUBLE_RX_RING)
-+
-+
-+#ifdef CNS3XXX_STATUS_ISR
-+irqreturn_t cns3xxx_status_isr(int irq, void *dev_id)
-+{
-+ u32 int_status = INTR_STAT_REG;
-+ u32 i=0;
-+
-+ cns3xxx_disable_irq(STATUS_INTERRUPT_ID);
-+ for (i = 0; i < 32; i++) {
-+ if (int_status & (1 << i)) {
-+ PRINT_INFO(cns3xxx_gsw_status_tbl[i]);
-+ }
-+ }
-+ INTR_STAT_REG = 0xffffffff; // write 1 for clear.
-+ cns3xxx_enable_irq(STATUS_INTERRUPT_ID);
-+ return IRQ_HANDLED;
-+}
-+#endif
-+
-+
-+#ifdef CNS3XXX_TSTC_RING0_ISR
-+irqreturn_t cns3xxx_tstc_ring0_isr(int irq, void *dev_id)
-+{
-+ return IRQ_HANDLED;
-+}
-+#endif
-+
-+
-+static int cns3xxx_install_isr(struct net_device *dev)
-+{
-+ int retval;
-+ CNS3XXXPrivate *priv = netdev_priv(dev);
-+
-+ if (install_isr_rc == 0) {
-+
-+ retval = request_irq(FSRC_RING0_INTERRUPT_ID, cns3xxx_fsrc_ring0_isr, IRQF_SHARED, "FSRC_RING0", intr_netdev);
-+
-+ if (retval) {
-+ return 1;
-+ }
-+
-+#ifdef CNS3XXX_FSQF_RING0_ISR
-+ retval = request_irq(FSQF_RING0_INTERRUPT_ID, cns3xxx_fsqf_ring0_isr, IRQF_SHARED, "FSQF_RING0", intr_netdev);
-+
-+ if (retval) {
-+ PRINT_INFO("%s: unable to get IRQ %d (irqval=%d).\n", "FSQF_RING0", FSQF_RING0_INTERRUPT_ID, retval);
-+ return 2;
-+ }
-+#endif
-+
-+#ifdef CNS3XXX_TSTC_RING0_ISR
-+ retval = request_irq(TSTC_RING0_INTERRUPT_ID, cns3xxx_tstc_ring0_isr, IRQF_SHARED, "TSTC_RING0", intr_netdev);
-+
-+ if (retval) {
-+ PRINT_INFO("%s: unable to get IRQ %d (irqval=%d).\n", "TSTC_RING0", FSQF_RING0_INTERRUPT_ID, retval);
-+ return 3;
-+ }
-+
-+#endif
-+
-+
-+ if (priv->num_rx_queues == 2) {
-+#if defined(CNS3XXX_DOUBLE_RX_RING)
-+ retval = request_irq(FSRC_RING1_INTERRUPT_ID, cns3xxx_fsrc_ring1_isr, IRQF_SHARED, "FSRC_RING1", intr_netdev);
-+
-+ if (retval) {
-+ return 1;
-+ }
-+
-+#ifdef CNS3XXX_FSQF_RING1_ISR
-+ retval = request_irq(FSQF_RING1_INTERRUPT_ID, cns3xxx_fsqf_ring1_isr, IRQF_SHARED, "FSQF_RING1", intr_netdev);
-+
-+ if (retval) {
-+ PRINT_INFO("%s: unable to get IRQ %d (irqval=%d).\n", "FSQF_RING1", FSQF_RING1_INTERRUPT_ID, retval);
-+ return 2;
-+ }
-+#endif
-+
-+#endif
-+ }
-+
-+#ifdef CNS3XXX_STATUS_ISR
-+ retval = request_irq(STATUS_INTERRUPT_ID, cns3xxx_status_isr, IRQF_SHARED, "GSW_STATUS", intr_netdev);
-+
-+ if (retval) {
-+ PRINT_INFO("%s: unable to get IRQ %d (irqval=%d).\n", "GSW STATUS INT", STATUS_INTERRUPT_ID, retval);
-+ return 3;
-+ }
-+ INTR_MASK_REG = 0;
-+#endif
-+
-+
-+
-+
-+
-+
-+#ifdef CONFIG_CNS3XXX_NAPI
-+{
-+ CNS3XXXPrivate *sp = netdev_priv(napi_dev);
-+ napi_enable(&sp->napi);
-+ netif_start_queue(napi_dev);
-+
-+#ifdef CNS3XXX_DOUBLE_RX_RING
-+ sp = netdev_priv(r1_napi_dev);
-+ napi_enable(&sp->napi);
-+ netif_start_queue(r1_napi_dev);
-+#endif
-+}
-+#endif
-+ // enable cpu port
-+ enable_port(3, 1);
-+
-+ } // end if (install_isr_rc == 0)
-+
-+ ++install_isr_rc;
-+
-+ return 0;
-+}
-+
-+
-+int cns3xxx_open(struct net_device *dev)
-+{
-+ CNS3XXXPrivate *priv = netdev_priv(dev);
-+ //static int init_state=0;
-+
-+ if (cns3xxx_setup_rx_tx_res(priv) != CAVM_OK) {
-+ return -1;
-+ }
-+
-+ netif_start_queue(dev);
-+ priv->net_device_priv->open();
-+
-+ cns3xxx_install_isr(dev);
-+
-+ enable_rx_dma(0, 1);
-+
-+ if (priv->num_rx_queues == 2)
-+ enable_rx_dma(1, 1);
-+
-+ netif_carrier_on(dev);
-+
-+ return 0;
-+}
-+
-+static int cns3xxx_uninstall_isr(struct net_device *dev)
-+{
-+ CNS3XXXPrivate *priv = netdev_priv(dev);
-+ --install_isr_rc;
-+ if (install_isr_rc == 0) {
-+ enable_port(3, 0);
-+ free_irq(FSRC_RING0_INTERRUPT_ID, intr_netdev);
-+#ifdef CNS3XXX_STATUS_ISR
-+ free_irq(STATUS_INTERRUPT_ID, intr_netdev);
-+#endif
-+
-+#ifdef CNS3XXX_FSQF_RING0_ISR
-+ free_irq(FSQF_RING0_INTERRUPT_ID, intr_netdev);
-+#endif
-+
-+#ifdef CNS3XXX_TSTC_RING0_ISR
-+ free_irq(TSTC_RING0_INTERRUPT_ID, intr_netdev);
-+#endif
-+
-+ if (priv->num_rx_queues == 2) {
-+ free_irq(FSRC_RING1_INTERRUPT_ID, intr_netdev);
-+
-+#ifdef CNS3XXX_FSQF_RING1_ISR
-+ free_irq(FSQF_RING1_INTERRUPT_ID, intr_netdev);
-+#endif
-+ }
-+
-+
-+
-+#ifdef CONFIG_CNS3XXX_NAPI
-+{
-+ CNS3XXXPrivate *sp = netdev_priv(napi_dev);
-+
-+ napi_disable(&sp->napi);
-+ netif_stop_queue(napi_dev);
-+#ifdef CNS3XXX_DOUBLE_RX_RING
-+ sp = netdev_priv(r1_napi_dev);
-+
-+ napi_disable(&sp->napi);
-+ netif_stop_queue(r1_napi_dev);
-+#endif
-+}
-+#endif
-+
-+
-+ }
-+
-+ return 0;
-+}
-+
-+int cns3xxx_close(struct net_device *dev)
-+{
-+ CNS3XXXPrivate *priv = netdev_priv(dev);
-+
-+ enable_rx_dma(0, 0);
-+ enable_tx_dma(0, 0);
-+
-+ if (priv->num_rx_queues == 2)
-+ enable_tx_dma(1, 0);
-+
-+ if (priv->num_tx_queues == 2)
-+ enable_rx_dma(1, 0);
-+
-+ netif_stop_queue(dev);
-+
-+ priv->net_device_priv->close();
-+ cns3xxx_uninstall_isr(dev);
-+ cns3xxx_free_rx_tx_res(priv);
-+ netif_carrier_off(dev);
-+ return 0;
-+}
-+
-+
-+
-+//#define MAC_PORT(p) MAC##p##_CFG_REG
-+
-+void broadcast_storm_cfg(u8 port, u8 boradcast, u8 multicast, u8 unknown)
-+{
-+ switch (port)
-+ {
-+ case 0:
-+ {
-+ (boradcast == 1) ? (MAC0_CFG_REG |= (1 << 30)) : (MAC0_CFG_REG &= (~(1 << 30))) ;
-+ (multicast == 1) ? (MAC0_CFG_REG |= (1 << 29)) : (MAC0_CFG_REG &= (~(1 << 29))) ;
-+ (unknown == 1) ? (MAC0_CFG_REG |= (1 << 28)) : (MAC0_CFG_REG &= (~(1 << 28))) ;
-+ break;
-+ }
-+ case 1:
-+ {
-+ (boradcast == 1) ? (MAC1_CFG_REG |= (1 << 30)) : (MAC1_CFG_REG &= (~(1 << 30))) ;
-+ (multicast == 1) ? (MAC1_CFG_REG |= (1 << 29)) : (MAC1_CFG_REG &= (~(1 << 29))) ;
-+ (unknown == 1) ? (MAC1_CFG_REG |= (1 << 28)) : (MAC1_CFG_REG &= (~(1 << 28))) ;
-+ break;
-+ }
-+ case 2:
-+ {
-+ (boradcast == 1) ? (MAC2_CFG_REG |= (1 << 30)) : (MAC2_CFG_REG &= (~(1 << 30))) ;
-+ (multicast == 1) ? (MAC2_CFG_REG |= (1 << 29)) : (MAC2_CFG_REG &= (~(1 << 29))) ;
-+ (unknown == 1) ? (MAC2_CFG_REG |= (1 << 28)) : (MAC2_CFG_REG &= (~(1 << 28))) ;
-+ break;
-+ }
-+ }
-+}
-+
-+void broadcast_storm_rate(u8 rate)
-+{
-+ TC_CTRL_REG &= (~(0xf << 24));
-+ TC_CTRL_REG |= (rate << 24);
-+}
-+
-+// port: 0, 1, 2 ; port0, port1 and port2
-+// config general mac port configuration
-+void cns3xxx_general_mac_cfg(u8 port)
-+{
-+ u32 cfg=0;
-+
-+ switch (port)
-+ {
-+ case 0:
-+ {
-+ cfg = MAC0_CFG_REG;
-+ break;
-+ }
-+ case 1:
-+ {
-+ cfg = MAC1_CFG_REG;
-+ break;
-+ }
-+ case 2:
-+ {
-+ cfg = MAC2_CFG_REG;
-+ break;
-+ }
-+ }
-+
-+
-+ // txc_check_en: 1
-+ cfg |= (1 << 13);
-+
-+ // bp_en: 1
-+ cfg |= (1 << 17);
-+
-+#ifdef CNS3XXX_LEARN_ENABLE
-+ // learn_dis: 0
-+ cfg &= (~(1 << 19));
-+#else
-+ // learn disable
-+ cfg |= (1 << 19);
-+#endif
-+
-+ // blocking_state: 0
-+ cfg &= (~(1 << 20));
-+
-+ // block_mode: 0
-+ cfg &= (~(1 << 21));
-+
-+#ifdef CNS3XXX_AGE_ENABLE
-+ // age_en: 1
-+ cfg |= (1 << 22);
-+
-+#else
-+ // age disable
-+ cfg &= (~(1 << 22));
-+#endif
-+
-+ // SA_secured: 0
-+ cfg &= (~(1 << 23));
-+
-+ switch (port)
-+ {
-+ case 0:
-+ {
-+ MAC0_CFG_REG = cfg;
-+ break;
-+ }
-+ case 1:
-+ {
-+ MAC1_CFG_REG = cfg;
-+ break;
-+ }
-+ case 2:
-+ {
-+ MAC2_CFG_REG = cfg;
-+ break;
-+ }
-+ }
-+
-+}
-+
-+void cns3xxx_configu_cpu_port(void)
-+{
-+ // Set CPU port to general configuration
-+
-+#ifdef CNS3XXX_LEARN_ENABLE
-+ CPU_CFG_REG &= (~(1 << 19));
-+#else
-+ // learn_dis: 1
-+ CPU_CFG_REG |= (1 << 19);
-+#endif
-+
-+#ifdef CNS3XXX_AGE_ENABLE
-+ // age_en: 1
-+ CPU_CFG_REG |= (1 << 22);
-+#else
-+ // age disable
-+ CPU_CFG_REG &= (~(1 << 22));
-+#endif
-+
-+ // SA_secured: 0
-+ CPU_CFG_REG &= (~(1 << 23));
-+
-+ // go to hnat:1
-+ CPU_CFG_REG |= (1 << 29);
-+
-+ //offset 4N +2
-+ CPU_CFG_REG &= (~(1 << 30));
-+#ifdef CNS3XXX_4N
-+ CPU_CFG_REG |= (1 << 30);
-+#endif
-+
-+ // cpu flow control disable
-+ CPU_CFG_REG &= (~(1 << 31));
-+#ifdef CNS3XXX_CPU_PORT_FC
-+ // cpu flow control enable
-+ CPU_CFG_REG |= (1 << 31);
-+#endif
-+
-+}
-+
-+static void __init cns3xxx_gsw_hw_init(void)
-+{
-+ //u32 mac_port_config;
-+ int i;
-+ //u32 cfg_reg = 0;
-+ u32 reg_config = 0;
-+
-+#ifdef CONFIG_SILICON
-+
-+ //GPIOB_PIN_EN_REG |= (1 << 14); //enable GMII2_CRS
-+ //GPIOB_PIN_EN_REG |= (1 << 15); //enable GMII2_COL
-+ GPIOB_PIN_EN_REG |= (1 << 20); //enable MDC
-+ GPIOB_PIN_EN_REG |= (1 << 21); //enable MDIO
-+
-+ cns3xxx_gsw_power_enable();
-+ cns3xxx_gsw_software_reset();
-+#endif
-+
-+#ifdef CNS3XXX_CONFIG_SIM_MODE
-+ SLK_SKEW_CTRL_REG |= (1 << 31);
-+#endif
-+
-+
-+#if 1
-+ while (((SRAM_TEST_REG >> 20) & 1) == 0);
-+#endif
-+
-+ clear_fs_dma_state(1);
-+
-+
-+ // disable port mac0, mac1, mac2, cpu port
-+ enable_port(0, 0);
-+ enable_port(1, 0);
-+ enable_port(2, 0);
-+ enable_port(3, 0);
-+
-+ // disable RX0/TX0 RX1/TX1 DMA
-+ enable_tx_dma(0, 0);
-+ enable_tx_dma(1, 0);
-+ enable_rx_dma(0, 0);
-+ enable_rx_dma(1, 0);
-+
-+ INTR_STAT_REG = 0xffffffff; // write 1 for clear.
-+
-+#ifdef CNS3XXX_DELAYED_INTERRUPT
-+ DELAY_INTR_CFG_REG = (1 << 16) | (max_pend_int_cnt << 8) | (max_pend_time);
-+#endif
-+
-+ reg_config = PHY_AUTO_ADDR_REG;
-+ reg_config &= ~(3 << 30);
-+#ifdef CONFIG_CNS3XXX_JUMBO_FRAME
-+ reg_config |= (3 << 30); // maximum frame length: 9600 bytes
-+#else
-+ reg_config |= (2 << 30); // maximum frame length: 1536 bytes
-+#endif
-+
-+ PHY_AUTO_ADDR_REG = reg_config;
-+
-+
-+ // Set general value for MAC_GLOB_CFG_REG
-+ // age_time: 2 ^(1-1) * 300 sec
-+ MAC_GLOB_CFG_REG &= (~0xf);
-+ MAC_GLOB_CFG_REG |= 1;
-+
-+
-+ // bkoff_mode: 111 follow standard
-+ MAC_GLOB_CFG_REG &= (~(0x7 << 9));
-+ MAC_GLOB_CFG_REG |= (0x7 << 9);
-+
-+ // jam_no: 1010:
-+ MAC_GLOB_CFG_REG &= (~(0xf << 12));
-+ MAC_GLOB_CFG_REG |= (0xa << 12);
-+
-+ // bp_mode: 10:
-+ MAC_GLOB_CFG_REG &= (~(0x3 << 16));
-+ MAC_GLOB_CFG_REG |= (0x2 << 16);
-+
-+ // res_mc_flt: 0
-+ MAC_GLOB_CFG_REG &= (~(0x1 << 28));
-+
-+ // col_mode: 11
-+ MAC_GLOB_CFG_REG &= (~(0x3 << 18));
-+ MAC_GLOB_CFG_REG |= (0x3 << 18);
-+
-+ // crc_stripping: 1
-+ MAC_GLOB_CFG_REG |= (0x1 << 20);
-+
-+
-+ // ACCEPT_CRC_BAD_PKT : 0
-+ MAC_GLOB_CFG_REG &= (~(0x1 << 21));
-+
-+#ifdef ACCEPT_CRC_BAD_PKT
-+ MAC_GLOB_CFG_REG |= (0x1 << 21);
-+#endif
-+
-+ // SVL
-+ MAC_GLOB_CFG_REG &= (~(0x1 << 7));
-+
-+#ifdef IVL
-+ // IVL: 1 (IVL), 0 (SVL)
-+ MAC_GLOB_CFG_REG |= (0x1 << 7);
-+#endif
-+
-+
-+ // HNAT_en: 0
-+ MAC_GLOB_CFG_REG &= (~(0x1 << 26));
-+
-+ // Firewall_mode: 0
-+ MAC_GLOB_CFG_REG &= (~(0x1 << 27));
-+
-+
-+
-+ cns3xxx_general_mac_cfg(0);
-+ cns3xxx_general_mac_cfg(1);
-+ cns3xxx_general_mac_cfg(2);
-+ cns3xxx_configu_cpu_port();
-+
-+ // write vlan table
-+ // set cpu port vlan table
-+ cns3xxx_vlan_table_add(&cpu_vlan_table_entry);
-+ for (i=0 ; i < sizeof(vlan_table_entry)/sizeof(VLANTableEntry) ; ++i)
-+ cns3xxx_vlan_table_add(&vlan_table_entry[i]);
-+
-+ cns3xxx_set_pvid(0, PORT0_PVID);
-+ cns3xxx_set_pvid(1, PORT1_PVID);
-+ cns3xxx_set_pvid(2, PORT2_PVID);
-+ cns3xxx_set_pvid(3, CPU_PVID);
-+
-+#ifdef CNS3XXX_SET_ARL_TABLE
-+ // set arl table
-+ cns3xxx_arl_table_flush();
-+#endif
-+}
-+
-+static int cns3xxx_set_mac_addr(struct net_device *dev, void *p)
-+{
-+ //struct sockaddr *sock_addr = addr;
-+ CNS3XXXPrivate *priv = netdev_priv(dev);
-+
-+ struct sockaddr *addr= p;
-+
-+
-+ spin_lock_irq(&priv->lock);
-+
-+
-+ if (!is_valid_ether_addr(addr->sa_data))
-+ return -EADDRNOTAVAIL;
-+
-+ // 1. delete old arl mac entry
-+ // 2. add new arl mac entry
-+ // 3. copy new mac to netdev field
-+
-+ if (priv->net_device_priv->arl_table_entry) {
-+ cns3xxx_arl_table_invalid(priv->net_device_priv->arl_table_entry);
-+ memcpy(priv->net_device_priv->arl_table_entry->mac, addr->sa_data, dev->addr_len);
-+ //print_arl_table_entry(priv->net_device_priv->arl_table_entry);
-+ cns3xxx_arl_table_add(priv->net_device_priv->arl_table_entry);
-+ }
-+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-+
-+ spin_unlock_irq(&priv->lock);
-+ return 0;
-+}
-+
-+
-+int set_fc_rls(struct ifreq *ifr)
-+{
-+ CNS3XXXSARLEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+ FC_GLOB_THRS_REG &= (~(0x1ff << 16));
-+ FC_GLOB_THRS_REG |= (ctl.val << 16);
-+ return CAVM_OK;
-+}
-+
-+int get_fc_rls(struct ifreq *ifr)
-+{
-+ CNS3XXXSARLEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+
-+ ctl.val = ((FC_GLOB_THRS_REG >> 16) & 0x1ff);
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+ return CAVM_OK;
-+}
-+
-+int set_fc_set(struct ifreq *ifr)
-+{
-+ CNS3XXXSARLEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+ FC_GLOB_THRS_REG &= (~0x1ff);
-+ FC_GLOB_THRS_REG |= ctl.val;
-+ return CAVM_OK;
-+}
-+
-+int get_fc_set(struct ifreq *ifr)
-+{
-+ CNS3XXXSARLEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+
-+ ctl.val = ((FC_GLOB_THRS_REG) & 0x1ff);
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+ return CAVM_OK;
-+}
-+
-+
-+int set_sarl_rls(struct ifreq *ifr)
-+{
-+ CNS3XXXSARLEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+ SARL_CTRL_REG &= (~(0x1ff << 12));
-+ SARL_CTRL_REG |= (ctl.val << 12);
-+ return CAVM_OK;
-+}
-+
-+int get_sarl_rls(struct ifreq *ifr)
-+{
-+ CNS3XXXSARLEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+
-+ ctl.val = ((SARL_CTRL_REG >> 12) & 0x1ff);
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+ return CAVM_OK;
-+}
-+
-+int set_sarl_enable(struct ifreq *ifr)
-+{
-+ CNS3XXXSARLEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+ SARL_CTRL_REG &= (~(0x1 << 31));
-+ SARL_CTRL_REG |= (ctl.val << 31);
-+ return CAVM_OK;
-+}
-+
-+int get_sarl_enable(struct ifreq *ifr)
-+{
-+ CNS3XXXSARLEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+ ctl.val = ((SARL_CTRL_REG >> 31 ) & 0x1);
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+ return CAVM_OK;
-+}
-+int set_sarl_set(struct ifreq *ifr)
-+{
-+ CNS3XXXSARLEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+ SARL_CTRL_REG &= (~0x1ff);
-+ SARL_CTRL_REG |= ctl.val;
-+ return CAVM_OK;
-+}
-+
-+int get_sarl_set(struct ifreq *ifr)
-+{
-+ CNS3XXXSARLEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+
-+ ctl.val = ((SARL_CTRL_REG) & 0x1ff);
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+ return CAVM_OK;
-+}
-+
-+int set_sarl_oq(struct ifreq *ifr)
-+{
-+ CNS3XXXSARLEntry ctl;
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+
-+ switch (ctl.gyr)
-+ {
-+ case 0: // green
-+ {
-+ SARL_OQ_GTH_REG &= (~(0xff << ctl.tc*8));
-+ SARL_OQ_GTH_REG |= (ctl.val << ctl.tc*8);
-+ break;
-+ }
-+ case 1: // yellow
-+ {
-+ SARL_OQ_YTH_REG &= (~(0xff << ctl.tc*8));
-+ SARL_OQ_YTH_REG |= (ctl.val << ctl.tc*8);
-+ break;
-+ }
-+ case 2: // red
-+ {
-+ SARL_OQ_RTH_REG &= (~(0xff << ctl.tc*8));
-+ SARL_OQ_RTH_REG |= (ctl.val << ctl.tc*8);
-+ break;
-+ }
-+ }
-+ return CAVM_OK;
-+}
-+
-+int get_sarl_oq(struct ifreq *ifr)
-+{
-+ CNS3XXXSARLEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+
-+ switch (ctl.gyr)
-+ {
-+ case 0: // green
-+ {
-+ ctl.val = ((SARL_OQ_GTH_REG >> ctl.tc*8) & 0xff);
-+ break;
-+ }
-+ case 1: // yellow
-+ {
-+ ctl.val = ((SARL_OQ_YTH_REG >> ctl.tc*8) & 0xff);
-+ break;
-+ }
-+ case 2: // red
-+ {
-+ ctl.val = ((SARL_OQ_RTH_REG >> ctl.tc*8) & 0xff);
-+ break;
-+ }
-+ }
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXSARLEntry)) )
-+ return -EFAULT;
-+ return CAVM_OK;
-+}
-+
-+int set_queue_weight(struct ifreq *ifr)
-+{
-+ CNS3XXXQueueWeightEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXQueueWeightEntry)) )
-+ return -EFAULT;
-+ switch (ctl.which_port)
-+ {
-+ case 0:
-+ {
-+ QUEUE_WEIGHT_SET(0, ctl)
-+ return 0;
-+ }
-+ case 1:
-+ {
-+ QUEUE_WEIGHT_SET(1, ctl)
-+ return 0;
-+ }
-+ case 2:
-+ {
-+ QUEUE_WEIGHT_SET(2, ctl)
-+ return 0;
-+ }
-+ case 3: // cpu port
-+ {
-+ CPU_PRI_CTRL_REG &= ~(0x3ffff);
-+ CPU_PRI_CTRL_REG |= (ctl.sch_mode << 16);
-+ CPU_PRI_CTRL_REG |= (ctl.q0_w);
-+ CPU_PRI_CTRL_REG |= (ctl.q1_w << 4);
-+ CPU_PRI_CTRL_REG |= (ctl.q2_w << 8);
-+ CPU_PRI_CTRL_REG |= (ctl.q3_w << 12);
-+ return 0;
-+ }
-+ case 4: // PPE port
-+ {
-+ HNAT_PRI_CTRL_REG &= ~(0x3ffff);
-+ HNAT_PRI_CTRL_REG |= (ctl.sch_mode << 16);
-+ HNAT_PRI_CTRL_REG |= (ctl.q0_w);
-+ HNAT_PRI_CTRL_REG |= (ctl.q1_w << 4);
-+ HNAT_PRI_CTRL_REG |= (ctl.q2_w << 8);
-+ HNAT_PRI_CTRL_REG |= (ctl.q3_w << 12);
-+ return 0;
-+ }
-+ default:
-+ {
-+ return -EFAULT;
-+ }
-+ }
-+}
-+
-+int get_queue_weight(struct ifreq *ifr)
-+{
-+ CNS3XXXQueueWeightEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXQueueWeightEntry)) )
-+ return -EFAULT;
-+
-+ switch (ctl.which_port)
-+ {
-+ case 0:
-+ {
-+ QUEUE_WEIGHT_GET(0, ctl)
-+ break;
-+ }
-+ case 1:
-+ {
-+ QUEUE_WEIGHT_GET(1, ctl)
-+ break;
-+ }
-+ case 2:
-+ {
-+ QUEUE_WEIGHT_GET(2, ctl)
-+ break;
-+ }
-+ case 3:
-+ {
-+ ctl.sch_mode = ((CPU_PRI_CTRL_REG >> 16 ) & 0x3);
-+ ctl.q0_w = ((CPU_PRI_CTRL_REG >> 0 ) & 0x7);
-+ ctl.q1_w = ((CPU_PRI_CTRL_REG >> 4 ) & 0x7);
-+ ctl.q2_w = ((CPU_PRI_CTRL_REG >> 8 ) & 0x7);
-+ ctl.q3_w = ((CPU_PRI_CTRL_REG >> 12 ) & 0x7);
-+ break;
-+ }
-+ case 4:
-+ {
-+ ctl.sch_mode = ((HNAT_PRI_CTRL_REG >> 16 ) & 0x3);
-+ ctl.q0_w = ((HNAT_PRI_CTRL_REG >> 0 ) & 0x7);
-+ ctl.q1_w = ((HNAT_PRI_CTRL_REG >> 4 ) & 0x7);
-+ ctl.q2_w = ((HNAT_PRI_CTRL_REG >> 8 ) & 0x7);
-+ ctl.q3_w = ((HNAT_PRI_CTRL_REG >> 12 ) & 0x7);
-+ break;
-+ }
-+ }
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXQueueWeightEntry)) )
-+ return -EFAULT;
-+
-+ return CAVM_OK;
-+}
-+
-+int set_rate_limit(struct ifreq *ifr)
-+{
-+ CNS3XXXRateLimitEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXRateLimitEntry)) )
-+ return -EFAULT;
-+ switch (ctl.which_port)
-+ {
-+ case 0:
-+ {
-+ RATE_CTRL_REG &= (~(0x7f << 8));
-+ RATE_CTRL_REG |= ( ctl.band_width << 8);
-+ RATE_CTRL_REG &= (~(0x3));
-+ RATE_CTRL_REG |= ctl.base_rate;
-+ return 0;
-+ }
-+ case 1:
-+ {
-+ RATE_CTRL_REG &= (~(0x7f << 16));
-+ RATE_CTRL_REG |= ( ctl.band_width << 16);
-+ RATE_CTRL_REG &= (~(0x3 << 2));
-+ RATE_CTRL_REG |= (ctl.base_rate << 2);
-+ return 0;
-+ }
-+ case 2:
-+ {
-+ RATE_CTRL_REG &= (~(0x7f << 24));
-+ RATE_CTRL_REG |= ( ctl.band_width << 24);
-+ RATE_CTRL_REG &= (~(0x3 << 4));
-+ RATE_CTRL_REG |= (ctl.base_rate << 4);
-+ return 0;
-+ }
-+ case 3: // port 0 extra dma
-+ {
-+ TC_CTRL_REG &= (~0x7f);
-+ TC_CTRL_REG |= ctl.band_width;
-+ RATE_CTRL_REG &= (~(0x3 << 6));
-+ RATE_CTRL_REG |= (ctl.base_rate << 6);
-+ return 0;
-+ }
-+ default:
-+ {
-+ return -EFAULT;
-+ }
-+ }
-+}
-+
-+int get_rate_limit(struct ifreq *ifr)
-+{
-+ CNS3XXXRateLimitEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXRateLimitEntry)) )
-+ return -EFAULT;
-+ switch (ctl.which_port)
-+ {
-+ case 0:
-+ {
-+ ctl.band_width = (RATE_CTRL_REG >> 8) & 0x7f;
-+ ctl.base_rate = RATE_CTRL_REG & 0x3;
-+ break;
-+ }
-+ case 1:
-+ {
-+ ctl.band_width = (RATE_CTRL_REG >> 16) & 0x7f;
-+ ctl.base_rate = (RATE_CTRL_REG >> 2) & 0x3;
-+ break;
-+ }
-+ case 2:
-+ {
-+ ctl.band_width = (RATE_CTRL_REG >> 24) & 0x7f;
-+ ctl.base_rate = (RATE_CTRL_REG >> 4) & 0x3;
-+ break;
-+ }
-+ case 3: // port 0 extra dma
-+ {
-+ ctl.band_width = (TC_CTRL_REG) & 0x7f;
-+ ctl.base_rate = (RATE_CTRL_REG >> 6) & 0x3;
-+ break;
-+ }
-+ default:
-+ {
-+ return -EFAULT;
-+ }
-+ }
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXRateLimitEntry)) )
-+ return -EFAULT;
-+
-+ return CAVM_OK;
-+}
-+
-+int set_fc(struct ifreq *ifr)
-+{
-+ CNS3XXXFCEntry ctl;
-+ u32 port_offset[]={0x0c, 0x10, 0x18, 0x14}; // 0x14 is cpu port offset
-+ u32 val=0;
-+
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXFCEntry)) )
-+ return -EFAULT;
-+
-+ val = SWITCH_REG_VALUE(port_offset[ctl.port]);
-+ if (ctl.port == 3) { // cpu port, only can set rx fc
-+ val &= (~(1 << 31));
-+ if (ctl.fc_en)
-+ val |= (1 << 31);
-+ } else {
-+ val &= (~(1 << 11)); // disable rx fc
-+ val &= (~(1 << 12)); // disable tx fc
-+ val |= (ctl.fc_en << 11);
-+ }
-+
-+ SWITCH_REG_VALUE(port_offset[ctl.port]) = val;
-+ return CAVM_OK;
-+}
-+
-+int get_fc(struct ifreq *ifr)
-+{
-+ CNS3XXXFCEntry ctl;
-+ u32 port_offset[]={0x0c, 0x10, 0x18, 0x14}; // 0x14 is cpu port offset
-+ u32 val=0;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXFCEntry)) )
-+ return -EFAULT;
-+
-+ val = SWITCH_REG_VALUE(port_offset[ctl.port]);
-+ if (ctl.port == 3) { // cpu port, only can set rx fc
-+ ctl.fc_en = ((val >> 31) & 1);
-+ } else {
-+ ctl.fc_en = ((val >> 11) & 3);
-+
-+ }
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXFCEntry)) )
-+ return -EFAULT;
-+
-+ return CAVM_OK;
-+}
-+
-+int set_ivl(struct ifreq *ifr)
-+{
-+ CNS3XXXIVLEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXIVLEntry)) )
-+ return -EFAULT;
-+
-+ cns3xxx_ivl(ctl.enable);
-+
-+ return CAVM_OK;
-+}
-+
-+int get_ivl(struct ifreq *ifr)
-+{
-+ CNS3XXXIVLEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXIVLEntry)) )
-+ return -EFAULT;
-+
-+ ctl.enable = ((MAC_GLOB_CFG_REG >> 7) & 0x1);
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXIVLEntry)) )
-+ return -EFAULT;
-+
-+ return CAVM_OK;
-+}
-+
-+int set_wan_port(struct ifreq *ifr)
-+{
-+ CNS3XXXWANPortEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXWANPortEntry)) )
-+ return -EFAULT;
-+ VLAN_CFG &= (~(0x1f << 8));
-+ VLAN_CFG |= (ctl.wan_port << 8);
-+
-+ return CAVM_OK;
-+}
-+int get_wan_port(struct ifreq *ifr)
-+{
-+ CNS3XXXWANPortEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXWANPortEntry)) )
-+ return -EFAULT;
-+
-+ ctl.wan_port = ((VLAN_CFG >> 8) & 0x1f);
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXWANPortEntry)) )
-+ return -EFAULT;
-+
-+ return CAVM_OK;
-+}
-+
-+int set_pvid(struct ifreq *ifr)
-+{
-+ CNS3XXXPVIDEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXPVIDEntry)) )
-+ return -EFAULT;
-+ cns3xxx_set_pvid(ctl.which_port, ctl.pvid);
-+
-+ return CAVM_OK;
-+}
-+
-+int get_pvid(struct ifreq *ifr)
-+{
-+ CNS3XXXPVIDEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXPVIDEntry)) )
-+ return -EFAULT;
-+
-+ ctl.pvid = cns3xxx_get_pvid(ctl.which_port);
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXPVIDEntry)) )
-+ return -EFAULT;
-+ return CAVM_OK;
-+}
-+
-+int set_qa(struct ifreq *ifr)
-+{
-+ CNS3XXXQAEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXQAEntry)) )
-+ return -EFAULT;
-+
-+ MAC_GLOB_CFG_EXT_REG &= ~(0x7 << 27);
-+ MAC_GLOB_CFG_EXT_REG |= (ctl.qa << 27);
-+
-+ return CAVM_OK;
-+}
-+
-+int get_qa(struct ifreq *ifr)
-+{
-+ CNS3XXXQAEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXQAEntry)) )
-+ return -EFAULT;
-+
-+ ctl.qa = (MAC_GLOB_CFG_EXT_REG >> 27) & 0x7;
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXQAEntry)) )
-+ return -EFAULT;
-+ return CAVM_OK;
-+}
-+
-+int get_packet_max_len(struct ifreq *ifr)
-+{
-+ CNS3XXXMaxLenEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXMaxLenEntry)) )
-+ return -EFAULT;
-+
-+ ctl.max_len = (PHY_AUTO_ADDR_REG >> 30) & 0x3;
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXMaxLenEntry)) )
-+ return -EFAULT;
-+ return CAVM_OK;
-+}
-+
-+int set_packet_max_len(struct ifreq *ifr)
-+{
-+ CNS3XXXMaxLenEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXMaxLenEntry)) )
-+ return -EFAULT;
-+
-+ PHY_AUTO_ADDR_REG &= (~(3 << 30));
-+ PHY_AUTO_ADDR_REG |= (ctl.max_len << 30);
-+
-+ return CAVM_OK;
-+}
-+
-+int set_udp_range(struct ifreq *ifr)
-+{
-+ CNS3XXXUdpRangeEtypeControl conf;
-+
-+ if (copy_from_user(&conf, ifr->ifr_data, sizeof(CNS3XXXUdpRangeEtypeControl)) )
-+ return -EFAULT;
-+
-+ switch (conf.udp_range_num)
-+ {
-+ case 0:
-+ {
-+ UDP_RANGE0_REG = 0;
-+ UDP_RANGE0_REG |= conf.port_start;
-+ UDP_RANGE0_REG |= (conf.port_end << 16);
-+ break;
-+ }
-+ case 1:
-+ {
-+ UDP_RANGE1_REG = 0;
-+ UDP_RANGE1_REG |= conf.port_start;
-+ UDP_RANGE1_REG |= (conf.port_end << 16);
-+ break;
-+ }
-+ case 2:
-+ {
-+ UDP_RANGE2_REG = 0;
-+ UDP_RANGE2_REG |= conf.port_start;
-+ UDP_RANGE2_REG |= (conf.port_end << 16);
-+ break;
-+ }
-+ case 3:
-+ {
-+ UDP_RANGE3_REG = 0;
-+ UDP_RANGE3_REG |= conf.port_start;
-+ UDP_RANGE3_REG |= (conf.port_end << 16);
-+ break;
-+ }
-+ }
-+
-+ return CAVM_OK;
-+}
-+
-+int get_udp_range(struct ifreq *ifr)
-+{
-+ CNS3XXXUdpRangeEtypeControl conf;
-+
-+ if (copy_from_user(&conf, ifr->ifr_data, sizeof(CNS3XXXUdpRangeEtypeControl)) )
-+ return -EFAULT;
-+
-+ switch (conf.udp_range_num)
-+ {
-+ case 0:
-+ {
-+ conf.port_start = (UDP_RANGE0_REG & 0xffff);
-+ conf.port_end = ((UDP_RANGE0_REG >> 16 )& 0xffff);
-+ break;
-+ }
-+ case 1:
-+ {
-+ conf.port_start = (UDP_RANGE1_REG & 0xffff);
-+ conf.port_end = ((UDP_RANGE1_REG >> 16 )& 0xffff);
-+ break;
-+ }
-+ case 2:
-+ {
-+ conf.port_start = (UDP_RANGE2_REG & 0xffff);
-+ conf.port_end = ((UDP_RANGE2_REG >> 16 )& 0xffff);
-+ break;
-+ }
-+ case 3:
-+ {
-+ conf.port_start = (UDP_RANGE3_REG & 0xffff);
-+ conf.port_end = ((UDP_RANGE3_REG >> 16 )& 0xffff);
-+ break;
-+ }
-+ }
-+
-+ if (copy_to_user(ifr->ifr_data, &conf, sizeof(CNS3XXXEtypeControl)) )
-+ return -EFAULT;
-+
-+ return CAVM_OK;
-+}
-+
-+int get_etype(struct ifreq *ifr)
-+{
-+ CNS3XXXEtypeControl conf;
-+
-+ if (copy_from_user(&conf, ifr->ifr_data, sizeof(CNS3XXXEtypeControl)) )
-+ return -EFAULT;
-+ switch (conf.etype_num)
-+ {
-+ case 0:
-+ {
-+ conf.val = (ETYPE1_ETYPE0_REG & 0xffff);
-+ conf.pri = (PRIO_ETYPE_UDP_REG & 0x7);
-+ break;
-+ }
-+ case 1:
-+ {
-+ conf.val = ((ETYPE1_ETYPE0_REG >> 16 )& 0xffff);
-+ conf.pri = ((PRIO_ETYPE_UDP_REG >> 4) & 0x7);
-+ break;
-+ }
-+ case 2:
-+ {
-+ conf.val = (ETYPE3_ETYPE2_REG & 0xffff);
-+ conf.pri = ((PRIO_ETYPE_UDP_REG >> 8) & 0x7);
-+ break;
-+ }
-+ case 3:
-+ {
-+ conf.val = ((ETYPE3_ETYPE2_REG >> 16 )& 0xffff);
-+ conf.pri = ((PRIO_ETYPE_UDP_REG >> 12) & 0x7);
-+ break;
-+ }
-+ }
-+ if (copy_to_user(ifr->ifr_data, &conf, sizeof(CNS3XXXEtypeControl)) )
-+ return -EFAULT;
-+
-+ return CAVM_OK;
-+}
-+
-+int set_etype(struct ifreq *ifr)
-+{
-+ CNS3XXXEtypeControl conf;
-+
-+ if (copy_from_user(&conf, ifr->ifr_data, sizeof(CNS3XXXEtypeControl)) )
-+ return -EFAULT;
-+ switch (conf.etype_num)
-+ {
-+ case 0:
-+ {
-+ ETYPE1_ETYPE0_REG &= (~0xffff);
-+ ETYPE1_ETYPE0_REG |= conf.val;
-+
-+ PRIO_ETYPE_UDP_REG &= (~7);
-+ PRIO_ETYPE_UDP_REG |= (conf.pri);
-+ break;
-+ }
-+ case 1:
-+ {
-+ ETYPE1_ETYPE0_REG &= (~(0xffff << 16));
-+ ETYPE1_ETYPE0_REG |= (conf.val << 16);
-+
-+ PRIO_ETYPE_UDP_REG &= (~(7 << 4));
-+ PRIO_ETYPE_UDP_REG |= (conf.pri << 4);
-+ break;
-+ }
-+ case 2:
-+ {
-+ ETYPE3_ETYPE2_REG &= (~0xffff);
-+ ETYPE3_ETYPE2_REG |= conf.val;
-+
-+ PRIO_ETYPE_UDP_REG &= (~(7 << 8));
-+ PRIO_ETYPE_UDP_REG |= (conf.pri << 8);
-+ break;
-+ }
-+ case 3:
-+ {
-+ ETYPE3_ETYPE2_REG &= (~(0xffff << 16));
-+ ETYPE3_ETYPE2_REG |= (conf.val << 16);
-+
-+ PRIO_ETYPE_UDP_REG &= (~(7 << 12));
-+ PRIO_ETYPE_UDP_REG |= (conf.pri << 12);
-+ break;
-+ }
-+ }
-+ return CAVM_OK;
-+}
-+
-+int get_pri_ip_dscp(struct ifreq *ifr)
-+{
-+ CNS3XXXPriIpDscpControl conf;
-+
-+ if (copy_from_user(&conf, ifr->ifr_data, sizeof(CNS3XXXPriIpDscpControl)) )
-+ return -EFAULT;
-+
-+ if ( 0 <= conf.ip_dscp_num && conf.ip_dscp_num <= 7) {
-+ conf.pri = ((PRIO_IPDSCP_7_0_REG >> (conf.ip_dscp_num * 4)) & 0x7);
-+ } else if ( 8 <= conf.ip_dscp_num && conf.ip_dscp_num <= 15) {
-+ conf.pri = ((PRIO_IPDSCP_15_8_REG >> ((conf.ip_dscp_num-8) * 4)) & 0x7);
-+ } else if ( 16 <= conf.ip_dscp_num && conf.ip_dscp_num <= 23) {
-+ conf.pri = ((PRIO_IPDSCP_23_16_REG >> ((conf.ip_dscp_num-16) * 4)) & 0x7);
-+ } else if ( 24 <= conf.ip_dscp_num && conf.ip_dscp_num <= 31) {
-+ conf.pri = ((PRIO_IPDSCP_31_24_REG >> ((conf.ip_dscp_num-24) * 4)) & 0x7);
-+ } else if ( 32 <= conf.ip_dscp_num && conf.ip_dscp_num <= 39) {
-+ conf.pri = ((PRIO_IPDSCP_39_32_REG >> ((conf.ip_dscp_num-32) * 4)) & 0x7);
-+ } else if ( 40 <= conf.ip_dscp_num && conf.ip_dscp_num <= 47) {
-+ conf.pri = ((PRIO_IPDSCP_47_40_REG >> ((conf.ip_dscp_num-40) * 4)) & 0x7);
-+ } else if ( 48 <= conf.ip_dscp_num && conf.ip_dscp_num <= 55) {
-+ conf.pri = ((PRIO_IPDSCP_55_48_REG >> ((conf.ip_dscp_num-48) * 4)) & 0x7);
-+ } else if ( 56 <= conf.ip_dscp_num && conf.ip_dscp_num <= 63) {
-+ conf.pri = ((PRIO_IPDSCP_63_56_REG >> ((conf.ip_dscp_num-56) * 4)) & 0x7);
-+ } else {
-+ return CAVM_ERR;
-+ }
-+
-+
-+ if (copy_to_user(ifr->ifr_data, &conf, sizeof(CNS3XXXPriIpDscpControl)) )
-+ return -EFAULT;
-+ return CAVM_OK;
-+}
-+
-+
-+int set_pri_ip_dscp(struct ifreq *ifr)
-+{
-+ CNS3XXXPriIpDscpControl conf;
-+
-+ if (copy_from_user(&conf, ifr->ifr_data, sizeof(CNS3XXXPriIpDscpControl)) )
-+ return -EFAULT;
-+
-+ if ( 0 <= conf.ip_dscp_num && conf.ip_dscp_num <= 7) {
-+ PRIO_IPDSCP_7_0_REG &= (~(0x7 << (conf.ip_dscp_num * 4) ) );
-+ PRIO_IPDSCP_7_0_REG |= (conf.pri << (conf.ip_dscp_num * 4));
-+ } else if ( 8 <= conf.ip_dscp_num && conf.ip_dscp_num <= 15) {
-+ PRIO_IPDSCP_15_8_REG &= (~(0x7 << ((conf.ip_dscp_num-8) * 4) ) );
-+ PRIO_IPDSCP_15_8_REG |= (conf.pri << ((conf.ip_dscp_num-8) * 4));
-+ } else if ( 16 <= conf.ip_dscp_num && conf.ip_dscp_num <= 23) {
-+ PRIO_IPDSCP_23_16_REG &= (~(0x7 << ((conf.ip_dscp_num-16) * 4) ) );
-+ PRIO_IPDSCP_23_16_REG |= (conf.pri << ((conf.ip_dscp_num-16) * 4));
-+
-+ } else if ( 24 <= conf.ip_dscp_num && conf.ip_dscp_num <= 31) {
-+ PRIO_IPDSCP_31_24_REG &= (~(0x7 << ((conf.ip_dscp_num-24) * 4) ) );
-+ PRIO_IPDSCP_31_24_REG |= (conf.pri << ((conf.ip_dscp_num-24) * 4));
-+
-+ } else if ( 32 <= conf.ip_dscp_num && conf.ip_dscp_num <= 39) {
-+ PRIO_IPDSCP_39_32_REG &= (~(0x7 << ((conf.ip_dscp_num-32) * 4) ) );
-+ PRIO_IPDSCP_39_32_REG |= (conf.pri << ((conf.ip_dscp_num-32) * 4));
-+
-+ } else if ( 40 <= conf.ip_dscp_num && conf.ip_dscp_num <= 47) {
-+ PRIO_IPDSCP_47_40_REG &= (~(0x7 << ((conf.ip_dscp_num-40) * 4) ) );
-+ PRIO_IPDSCP_47_40_REG |= (conf.pri << ((conf.ip_dscp_num-40) * 4));
-+ } else if ( 48 <= conf.ip_dscp_num && conf.ip_dscp_num <= 55) {
-+ PRIO_IPDSCP_55_48_REG &= (~(0x7 << ((conf.ip_dscp_num-48) * 4) ) );
-+ PRIO_IPDSCP_55_48_REG |= (conf.pri << ((conf.ip_dscp_num-48) * 4));
-+ } else if ( 56 <= conf.ip_dscp_num && conf.ip_dscp_num <= 63) {
-+ PRIO_IPDSCP_63_56_REG &= (~(0x7 << ((conf.ip_dscp_num-56) * 4) ) );
-+ PRIO_IPDSCP_63_56_REG |= (conf.pri << ((conf.ip_dscp_num-56) * 4));
-+ } else {
-+ return CAVM_ERR;
-+ }
-+ return CAVM_OK;
-+}
-+
-+
-+int bcm53115M_reg_read_ioctl(struct ifreq *ifr)
-+{
-+ int bcm53115M_reg_read(int page, int offset, u8 *buf, int len);
-+ CNS3XXXBCM53115M conf;
-+ int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
-+
-+
-+ if (copy_from_user(&conf, ifr->ifr_data, sizeof(CNS3XXXBCM53115M)) )
-+ return -EFAULT;
-+ printk("conf.page: %x\n", conf.page);
-+ printk("conf.offset: %x\n", conf.offset);
-+ printk("conf.data_len: %x\n", conf.data_len);
-+ switch (conf.data_len)
-+ {
-+ case 1:
-+ {
-+ bcm53115M_reg_read(conf.page, conf.offset, (u8 *)&conf.u8_val, 1);
-+ printk("conf.u8_val: %x\n", conf.u8_val);
-+ break;
-+ }
-+ case 2:
-+ {
-+ bcm53115M_reg_read(conf.page, conf.offset, (u8 *)&conf.u16_val, 2);
-+ printk("conf.u16_val: %x\n", conf.u16_val);
-+ break;
-+ }
-+ case 4:
-+ {
-+ bcm53115M_reg_read(conf.page, conf.offset, (u8 *)&conf.u32_val, 4);
-+ printk("conf.u32_val: %x\n", conf.u32_val);
-+ break;
-+ }
-+ default:
-+ {
-+ printk("[kernel mode]: don't support date length: %d\n", conf.data_len);
-+ }
-+ }
-+
-+
-+
-+ if (copy_to_user(ifr->ifr_data, &conf, sizeof(CNS3XXXBCM53115M)) )
-+ return -EFAULT;
-+ return CAVM_OK;
-+}
-+
-+int bcm53115M_reg_write_ioctl(struct ifreq *ifr)
-+{
-+ int bcm53115M_reg_write(int page, int offset, u8 *buf, int len);
-+ CNS3XXXBCM53115M conf;
-+
-+ if (copy_from_user(&conf, ifr->ifr_data, sizeof(CNS3XXXBCM53115M)) )
-+ return -EFAULT;
-+
-+ switch (conf.data_len)
-+ {
-+ case 1:
-+ {
-+ bcm53115M_reg_write(conf.page, conf.offset, (u8 *)&conf.u8_val, 1);
-+ break;
-+ }
-+ case 2:
-+ {
-+ bcm53115M_reg_write(conf.page, conf.offset, (u8 *)&conf.u16_val, 2);
-+ break;
-+ }
-+ case 4:
-+ {
-+ bcm53115M_reg_write(conf.page, conf.offset, (u8 *)&conf.u32_val, 4);
-+ break;
-+ }
-+ default:
-+ {
-+ printk("[kernel mode]: don't support date length: %d\n", conf.data_len);
-+ }
-+ }
-+ return CAVM_OK;
-+}
-+
-+#if 0
-+int get_rxring(struct ifreq *ifr)
-+{
-+ CNS3XXXRingStatus conf;
-+
-+ if (copy_from_user(&conf, ifr->ifr_data, sizeof(CNS3XXXRingStatus)) )
-+ return -EFAULT;
-+ conf.rx_ring=g_ring_info.rx_ring;
-+ conf.tx_ring=0;
-+ if (copy_to_user(ifr->ifr_data, &conf, sizeof(CNS3XXXRingStatus)) )
-+ return -EFAULT;
-+}
-+#endif
-+
-+int dump_mib_counter(struct ifreq *ifr)
-+{
-+ CNS3XXXMIBCounter conf;
-+ int addr=0,i=0;
-+
-+ if (copy_from_user(&conf, ifr->ifr_data, sizeof(CNS3XXXMIBCounter)) )
-+ return -EFAULT;
-+
-+ for (addr=0x300; addr <= 0x334 ; addr+=4)
-+ conf.mib[i++]=SWITCH_REG_VALUE(addr);
-+ for (addr=0x400; addr <= 0x434 ; addr+=4)
-+ conf.mib[i++]=SWITCH_REG_VALUE(addr);
-+ for (addr=0x600; addr <= 0x634 ; addr+=4)
-+ conf.mib[i++]=SWITCH_REG_VALUE(addr);
-+ // cpu mib counter
-+ for (addr=0x500; addr <= 0x528 ; addr+=4)
-+ conf.mib[i++]=SWITCH_REG_VALUE(addr);
-+ conf.mib_len=i;
-+ if (copy_to_user(ifr->ifr_data, &conf, sizeof(CNS3XXXMIBCounter)) )
-+ return -EFAULT;
-+ return 0;
-+}
-+
-+// reference e100.c
-+int cns3xxx_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-+{
-+ CNS3XXXIoctlCmd ioctl_cmd;
-+
-+ //printk("cns3xxx_do_ioctl begin\n");
-+
-+ if (cmd != SIOCDEVPRIVATE) {
-+ return -EOPNOTSUPP;
-+ }
-+ if (copy_from_user(&ioctl_cmd, ifr->ifr_data, sizeof(CNS3XXXIoctlCmd)))
-+ return -EFAULT;
-+
-+ //printk("ioctl_cmd: %d\n", ioctl_cmd);
-+ switch (ioctl_cmd) {
-+ case CNS3XXX_ARP_REQUEST_SET:
-+ {
-+ CNS3XXXArpRequestControl ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXArpRequestControl)) )
-+ return -EFAULT;
-+
-+ (ctl.val==0) ? (MAC_GLOB_CFG_REG &= (~(1 << 23)) ): (MAC_GLOB_CFG_REG |= (1 << 23) );
-+
-+ }
-+
-+ case CNS3XXX_ARP_REQUEST_GET:
-+ {
-+ CNS3XXXArpRequestControl ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXArpRequestControl)) )
-+ return -EFAULT;
-+
-+ ctl.val = ((MAC_GLOB_CFG_REG >> 23) & 1);
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXArpRequestControl)) )
-+ return -EFAULT;
-+ return CAVM_OK;
-+ }
-+
-+ case CNS3XXX_HOL_PREVENT_SET:
-+ {
-+ CNS3XXXHOLPreventControl ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXHOLPreventControl)) )
-+ return -EFAULT;
-+ (ctl.enable == 1) ? (TC_CTRL_REG |= (1 << 29)) : (TC_CTRL_REG &= (~(1 << 29))) ;
-+
-+ return CAVM_OK;
-+ }
-+ case CNS3XXX_HOL_PREVENT_GET:
-+ {
-+ CNS3XXXHOLPreventControl ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXHOLPreventControl)) )
-+ return -EFAULT;
-+
-+ ctl.enable = ((TC_CTRL_REG >> 29) & 0x1);
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXHOLPreventControl)) )
-+ return -EFAULT;
-+ return CAVM_OK;
-+ }
-+
-+ // for S component or C conponent
-+ case CNS3XXX_BRIDGE_SET:
-+ {
-+ CNS3XXXBridgeControl ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXBridgeControl)) )
-+ return -EFAULT;
-+ (ctl.type == 1) ? (VLAN_CFG |= (1 << 1)) : (VLAN_CFG &= (~(1 << 1))) ;
-+
-+
-+ }
-+ case CNS3XXX_BRIDGE_GET:
-+ {
-+ CNS3XXXBridgeControl ctl;
-+
-+ ctl.type = ((VLAN_CFG >> 1) & 0x1);
-+ printk("[kernel mode] ctl.type: %d\n", ctl.type);
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXBridgeControl)) )
-+ return -EFAULT;
-+
-+ return CAVM_OK;
-+ }
-+
-+ case CNS3XXX_PORT_NEIGHBOR_SET:
-+ {
-+ CNS3XXXPortNeighborControl ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXPortNeighborControl)) )
-+ return -EFAULT;
-+ switch (ctl.which_port)
-+ {
-+ case 0:
-+ {
-+ (ctl.type == 1) ? (VLAN_CFG |= (1 << 4)) : (VLAN_CFG &= (~(1 << 4))) ;
-+ return 0;
-+ }
-+ case 1:
-+ {
-+ (ctl.type == 1) ? (VLAN_CFG |= (1 << 5)) : (VLAN_CFG &= (~(1 << 5))) ;
-+ return 0;
-+ }
-+ case 2:
-+ {
-+ (ctl.type == 1) ? (VLAN_CFG |= (1 << 7)) : (VLAN_CFG &= (~(1 << 7))) ;
-+ return 0;
-+ }
-+ case 3: // cpu port
-+ {
-+ (ctl.type == 1) ? (VLAN_CFG |= (1 << 6)) : (VLAN_CFG &= (~(1 << 6))) ;
-+ return 0;
-+ }
-+ default:
-+ return -EFAULT;
-+ }
-+
-+ }
-+
-+ case CNS3XXX_PORT_NEIGHBOR_GET:
-+ {
-+ CNS3XXXPortNeighborControl ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXPortNeighborControl)) )
-+ return -EFAULT;
-+ switch (ctl.which_port)
-+ {
-+ case 0:
-+ {
-+ ctl.type = ((VLAN_CFG >> 4 ) & 0x1);
-+ break;
-+ }
-+ case 1:
-+ {
-+ ctl.type = ((VLAN_CFG >> 5 ) & 0x1);
-+ break;
-+ }
-+ case 2:
-+ {
-+ ctl.type = ((VLAN_CFG >> 7 ) & 0x1);
-+ break;
-+ }
-+ case 3: // cpu port
-+ {
-+ ctl.type = ((VLAN_CFG >> 6 ) & 0x1);
-+ break;
-+ }
-+ }
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXPortNeighborControl)) )
-+ return -EFAULT;
-+
-+ return CAVM_OK;
-+ }
-+
-+ case CNS3XXX_VLAN_TABLE_LOOKUP:
-+ {
-+ CNS3XXXVLANTableEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXVLANTableEntry)) )
-+ return -EFAULT;
-+ if (cns3xxx_vlan_table_lookup(&ctl.entry) == CAVM_NOT_FOUND) {
-+ return CAVM_NOT_FOUND;
-+ }
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXVLANTableEntry)))
-+ return -EFAULT;
-+
-+ return CAVM_FOUND;
-+ }
-+ case CNS3XXX_VLAN_TABLE_READ:
-+ {
-+ CNS3XXXVLANTableEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXVLANTableEntry)) )
-+ {
-+ return -EFAULT;
-+ }
-+ cns3xxx_vlan_table_read(&ctl.entry);
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXVLANTableEntry)))
-+ return -EFAULT;
-+
-+ return 0;
-+ }
-+ case CNS3XXX_VLAN_TABLE_ADD:
-+ {
-+ CNS3XXXVLANTableEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXVLANTableEntry)) )
-+ return -EFAULT;
-+ cns3xxx_vlan_table_add(&ctl.entry);
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXVLANTableEntry)))
-+ return -EFAULT;
-+
-+ return 0;
-+ }
-+
-+ case CNS3XXX_ARL_TABLE_ADD:
-+ {
-+ CNS3XXXARLTableEntry ctl;
-+
-+ printk("[kernel mode] CNS3XXX_ARL_TABLE_ADD\n");
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXARLTableEntry)) )
-+ return -EFAULT;
-+ cns3xxx_arl_table_add(&ctl.entry);
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXARLTableEntry)))
-+ return -EFAULT;
-+
-+ return 0;
-+ }
-+
-+
-+ case CNS3XXX_ARL_TABLE_DEL:
-+ {
-+ CNS3XXXARLTableEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXARLTableEntry)) )
-+ return -EFAULT;
-+ cns3xxx_arl_table_invalid(&ctl.entry);
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXARLTableEntry)))
-+ return -EFAULT;
-+
-+ return 0;
-+ }
-+ case CNS3XXX_VLAN_TABLE_DEL:
-+ {
-+ CNS3XXXARLTableEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXARLTableEntry)) )
-+ return -EFAULT;
-+ cns3xxx_arl_table_invalid(&ctl.entry);
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXARLTableEntry)))
-+ return -EFAULT;
-+
-+ return CAVM_FOUND;
-+ }
-+
-+ case CNS3XXX_ARL_TABLE_SEARCH:
-+ {
-+ CNS3XXXARLTableEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXARLTableEntry)) )
-+ return -EFAULT;
-+ if (cns3xxx_arl_table_search(&ctl.entry) == CAVM_NOT_FOUND){
-+ printk("[kernel mode] not found\n");
-+ return CAVM_NOT_FOUND;
-+ }
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXARLTableEntry)))
-+ return -EFAULT;
-+
-+ return CAVM_FOUND;
-+ }
-+ case CNS3XXX_ARL_IS_TABLE_END:
-+ {
-+ CNS3XXXARLTableEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXARLTableEntry)) )
-+ return -EFAULT;
-+ if (cns3xxx_is_arl_table_end() == CAVM_ERR)
-+ return CAVM_ERR;
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXARLTableEntry)))
-+ return -EFAULT;
-+
-+ return CAVM_OK;
-+ }
-+
-+ case CNS3XXX_ARL_TABLE_SEARCH_AGAIN:
-+ {
-+ CNS3XXXARLTableEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXARLTableEntry)) )
-+ return -EFAULT;
-+ if (cns3xxx_arl_table_search_again(&ctl.entry) == CAVM_NOT_FOUND)
-+ return CAVM_NOT_FOUND;
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXARLTableEntry)))
-+ return -EFAULT;
-+
-+ return CAVM_FOUND;
-+ }
-+
-+ case CNS3XXX_ARL_TABLE_FLUSH:
-+ {
-+ CNS3XXXARLTableEntry ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXARLTableEntry)) )
-+ return -EFAULT;
-+
-+ cns3xxx_arl_table_flush();
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXARLTableEntry)))
-+ return -EFAULT;
-+
-+ return CAVM_FOUND;
-+ }
-+
-+
-+
-+ case CNS3XXX_ARL_TABLE_LOOKUP:
-+ {
-+ CNS3XXXARLTableEntry ctl;
-+
-+
-+ printk("[kernel mode] in CNS3XXX_ARL_TABLE_LOOKUP\n");
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXARLTableEntry)) )
-+ return -EFAULT;
-+ if (cns3xxx_arl_table_lookup(&ctl.entry) == CAVM_NOT_FOUND)
-+ return CAVM_NOT_FOUND;
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXARLTableEntry)))
-+ return -EFAULT;
-+
-+ return CAVM_FOUND;
-+ }
-+
-+ case CNS3XXX_TC_SET:
-+ {
-+ CNS3XXXTrafficClassControl ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXTrafficClassControl)) )
-+ return -EFAULT;
-+ TC_CTRL_REG &= (~(0x3 << 30));
-+ TC_CTRL_REG |= (ctl.tc << 30);
-+ return CAVM_OK;
-+ }
-+ case CNS3XXX_TC_GET:
-+ {
-+ CNS3XXXTrafficClassControl ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXTrafficClassControl)) )
-+ return -EFAULT;
-+
-+ ctl.tc = ((TC_CTRL_REG >> 30) & 0x3);
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXTrafficClassControl)) )
-+ return -EFAULT;
-+
-+ return CAVM_OK;
-+ }
-+
-+ case CNS3XXX_PRI_CTRL_SET:
-+ {
-+ CNS3XXXPriCtrlControl ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXPriCtrlControl)) )
-+ return -EFAULT;
-+
-+ switch (ctl.which_port)
-+ {
-+ case 0:
-+ {
-+ MAC0_PRI_CTRL_REG &= (~(0x7 << 24));
-+ MAC0_PRI_CTRL_REG &= (~(0xf << 18));
-+
-+ MAC0_PRI_CTRL_REG |= (ctl.port_pri << 24);
-+
-+ MAC0_PRI_CTRL_REG |= (ctl.ether_pri_en << 18);
-+ MAC0_PRI_CTRL_REG |= (ctl.vlan_pri_en << 19);
-+ MAC0_PRI_CTRL_REG |= (ctl.dscp_pri_en << 20);
-+ MAC0_PRI_CTRL_REG |= (ctl.udp_pri_en << 21);
-+ break;
-+ }
-+ case 1:
-+ {
-+ MAC1_PRI_CTRL_REG &= (~(0x7 << 24));
-+ MAC1_PRI_CTRL_REG &= (~(0xf << 18));
-+
-+ MAC1_PRI_CTRL_REG |= (ctl.port_pri << 24);
-+
-+ MAC1_PRI_CTRL_REG |= (ctl.ether_pri_en << 18);
-+ MAC1_PRI_CTRL_REG |= (ctl.vlan_pri_en << 19);
-+ MAC1_PRI_CTRL_REG |= (ctl.dscp_pri_en << 20);
-+ MAC1_PRI_CTRL_REG |= (ctl.udp_pri_en << 21);
-+ break;
-+ }
-+ case 2:
-+ {
-+ MAC2_PRI_CTRL_REG &= (~(0x7 << 24));
-+ MAC2_PRI_CTRL_REG &= (~(0xf << 18));
-+
-+ MAC2_PRI_CTRL_REG |= (ctl.port_pri << 24);
-+
-+ MAC2_PRI_CTRL_REG |= (ctl.ether_pri_en << 18);
-+ MAC2_PRI_CTRL_REG |= (ctl.vlan_pri_en << 19);
-+ MAC2_PRI_CTRL_REG |= (ctl.dscp_pri_en << 20);
-+ MAC2_PRI_CTRL_REG |= (ctl.udp_pri_en << 21);
-+ break;
-+ }
-+ case 3: // cpu
-+ {
-+ printk("[kernel mode] CPU_PRI_CTRL_REG: %#x\n", CPU_PRI_CTRL_REG);
-+ CPU_PRI_CTRL_REG &= (~(0x7 << 24));
-+ CPU_PRI_CTRL_REG &= (~(0xf << 18));
-+
-+ CPU_PRI_CTRL_REG |= (ctl.port_pri << 24);
-+
-+ CPU_PRI_CTRL_REG |= (ctl.ether_pri_en << 18);
-+ CPU_PRI_CTRL_REG |= (ctl.vlan_pri_en << 19);
-+ CPU_PRI_CTRL_REG |= (ctl.dscp_pri_en << 20);
-+ CPU_PRI_CTRL_REG |= (ctl.udp_pri_en << 21);
-+ break;
-+ }
-+ }
-+
-+ return CAVM_OK;
-+ }
-+
-+ case CNS3XXX_PRI_CTRL_GET:
-+ {
-+ CNS3XXXPriCtrlControl ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXPriCtrlControl)) )
-+ return -EFAULT;
-+
-+
-+ if (copy_to_user(ifr->ifr_data, &ctl, sizeof(CNS3XXXPriCtrlControl)) )
-+ return -EFAULT;
-+
-+ return CAVM_OK;
-+ }
-+
-+ case CNS3XXX_DMA_RING_CTRL_SET:
-+ {
-+ CNS3XXXDmaRingCtrlControl ctl;
-+
-+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(CNS3XXXDmaRingCtrlControl)) )
-+ return -EFAULT;
-+
-+ (ctl.ts_double_ring_en == 0) ? DMA_RING_CTRL_REG &= (~(0x1 << 16)) : (DMA_RING_CTRL_REG |= (ctl.ts_double_ring_en << 16));
-+ (ctl.fs_double_ring_en == 0) ? DMA_RING_CTRL_REG &= (~(0x1 << 0)) : (DMA_RING_CTRL_REG |= (ctl.fs_double_ring_en << 0));
-+ (ctl.fs_pkt_allocate == 0) ? DMA_RING_CTRL_REG &= (~(0x1 << 1)) : (DMA_RING_CTRL_REG |= (ctl.fs_pkt_allocate << 1));
-+ }
-+
-+ case CNS3XXX_PRI_IP_DSCP_SET:
-+ {
-+ return set_pri_ip_dscp(ifr);
-+ }
-+ case CNS3XXX_PRI_IP_DSCP_GET:
-+ {
-+ return get_pri_ip_dscp(ifr);
-+ }
-+
-+ case CNS3XXX_ETYPE_SET:
-+ {
-+ return set_etype(ifr);
-+ }
-+ case CNS3XXX_ETYPE_GET:
-+ {
-+ return get_etype(ifr);
-+ }
-+
-+ case CNS3XXX_UDP_RANGE_SET:
-+ {
-+ return set_udp_range(ifr);
-+ }
-+ case CNS3XXX_UDP_RANGE_GET:
-+ {
-+ return get_udp_range(ifr);
-+ }
-+
-+ case CNS3XXX_RATE_LIMIT_SET:
-+ {
-+ return set_rate_limit(ifr);
-+ }
-+ case CNS3XXX_RATE_LIMIT_GET:
-+ {
-+ return get_rate_limit(ifr);
-+ }
-+ case CNS3XXX_QUEUE_WEIGHT_SET:
-+ {
-+ return set_queue_weight(ifr);
-+ }
-+ case CNS3XXX_QUEUE_WEIGHT_GET:
-+ {
-+ return get_queue_weight(ifr);
-+ }
-+
-+ case CNS3XXX_FC_RLS_SET:
-+ {
-+ return set_fc_rls(ifr);
-+ }
-+ case CNS3XXX_FC_RLS_GET:
-+ {
-+ return get_fc_rls(ifr);
-+ }
-+
-+ case CNS3XXX_FC_SET_SET:
-+ {
-+ return set_fc_set(ifr);
-+ }
-+ case CNS3XXX_FC_SET_GET:
-+ {
-+ return get_fc_set(ifr);
-+ }
-+
-+ case CNS3XXX_SARL_RLS_SET:
-+ {
-+ return set_sarl_rls(ifr);
-+ }
-+ case CNS3XXX_SARL_RLS_GET:
-+ {
-+ return get_sarl_rls(ifr);
-+ }
-+
-+ case CNS3XXX_SARL_SET_SET:
-+ {
-+ return set_sarl_set(ifr);
-+ }
-+ case CNS3XXX_SARL_SET_GET:
-+ {
-+ return get_sarl_set(ifr);
-+ }
-+
-+ case CNS3XXX_SARL_OQ_SET:
-+ {
-+ return set_sarl_oq(ifr);
-+ }
-+ case CNS3XXX_SARL_OQ_GET:
-+ {
-+ return get_sarl_oq(ifr);
-+ }
-+
-+ case CNS3XXX_SARL_ENABLE_SET:
-+ {
-+ return set_sarl_enable(ifr);
-+ }
-+ case CNS3XXX_SARL_ENABLE_GET:
-+ {
-+ return get_sarl_enable(ifr);
-+ }
-+
-+ case CNS3XXX_FC_SET:
-+ {
-+ return set_fc(ifr);
-+ }
-+ case CNS3XXX_FC_GET:
-+ {
-+ return get_fc(ifr);
-+ }
-+
-+ case CNS3XXX_IVL_SET:
-+ {
-+ return set_ivl(ifr);
-+ }
-+ case CNS3XXX_IVL_GET:
-+ {
-+ return get_ivl(ifr);
-+ }
-+
-+ case CNS3XXX_WAN_PORT_SET:
-+ {
-+ return set_wan_port(ifr);
-+ }
-+ case CNS3XXX_WAN_PORT_GET:
-+ {
-+ return get_wan_port(ifr);
-+ }
-+
-+ case CNS3XXX_PVID_SET:
-+ {
-+ return set_pvid(ifr);
-+ }
-+ case CNS3XXX_PVID_GET:
-+ {
-+ return get_pvid(ifr);
-+ }
-+
-+ case CNS3XXX_QA_GET:
-+ {
-+ return get_qa(ifr);
-+ }
-+ case CNS3XXX_QA_SET:
-+ {
-+ return set_qa(ifr);
-+ }
-+
-+ case CNS3XXX_PACKET_MAX_LEN_GET:
-+ {
-+ return get_packet_max_len(ifr);
-+ }
-+ case CNS3XXX_PACKET_MAX_LEN_SET:
-+ {
-+ return set_packet_max_len(ifr);
-+ }
-+
-+ case CNS3XXX_BCM53115M_REG_READ:
-+ {
-+ return bcm53115M_reg_read_ioctl(ifr);
-+ }
-+ case CNS3XXX_BCM53115M_REG_WRITE:
-+ {
-+ return bcm53115M_reg_write_ioctl(ifr);
-+ }
-+
-+#if 0
-+ case CNS3XXX_RXRING_STATUS:
-+ {
-+ return get_rxring(ifr);
-+ }
-+#endif
-+ case CNS3XXX_DUMP_MIB_COUNTER:
-+ {
-+ return dump_mib_counter(ifr);
-+ }
-+
-+
-+ default:
-+ {
-+ printk("[kernel mode] don't match any command\n");
-+ break;
-+ }
-+
-+ } // end switch (ioctl_cmd)
-+ return 0;
-+}
-+
-+#ifdef CONFIG_CNS3XXX_NAPI
-+static int cns3xxx_poll(struct napi_struct *napi, int budget)
-+{
-+
-+ CNS3XXXPrivate *sp = container_of(napi, CNS3XXXPrivate, napi);
-+ int work_done = 0;
-+ int work_to_do = budget; // define minima value
-+
-+ cns3xxx_receive_packet(sp, 0, &work_done, work_to_do);
-+
-+ budget -= work_done;
-+
-+ if (work_done) {
-+ if (test_bit(0, (unsigned long *)&sp->is_qf) == 1){
-+ clear_bit(0, (unsigned long *)&sp->is_qf);
-+ enable_rx_dma(sp->ring_index, 1);
-+ return 1;
-+ }
-+ } else {
-+ //netif_rx_complete(napi_dev, &sp->napi);
-+ napi_complete(napi);
-+#ifdef CNS3XXX_USE_MASK
-+ cns3xxx_write_pri_mask(0xf0);
-+#else
-+ if (sp->ring_index == 0)
-+ cns3xxx_enable_irq(FSRC_RING0_INTERRUPT_ID);
-+ else
-+ cns3xxx_enable_irq(FSRC_RING1_INTERRUPT_ID);
-+#endif
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+#endif
-+
-+static struct net_device_stats *cns3xxx_get_stats(struct net_device *dev)
-+{
-+ CNS3XXXPrivate *priv = netdev_priv(dev);
-+
-+ return &priv->stats;
-+}
-+
-+static int cns3xxx_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+ if (new_mtu < cns3xxx_min_mtu() || new_mtu > cns3xxx_max_mtu())
-+ return -EINVAL;
-+
-+ dev->mtu = new_mtu;
-+
-+ return 0;
-+}
-+
-+static void cns3xxx_timeout(struct net_device *dev)
-+{
-+ //star_gsw_enable(dev);
-+ netif_wake_queue(dev);
-+ dev->trans_start = jiffies;
-+}
-+
-+#ifdef LINUX2631
-+static const struct net_device_ops cns3xxx_netdev_ops = {
-+ .ndo_open = cns3xxx_open,
-+ .ndo_stop = cns3xxx_close,
-+ .ndo_start_xmit = cns3xxx_send_packet,
-+ //.ndo_validate_addr = eth_validate_addr,
-+ //.ndo_set_multicast_list = cns3xxx_set_multicast_list,
-+ .ndo_set_mac_address = cns3xxx_set_mac_addr,
-+ .ndo_change_mtu = cns3xxx_change_mtu,
-+ .ndo_do_ioctl = cns3xxx_do_ioctl,
-+ .ndo_tx_timeout = cns3xxx_timeout,
-+ .ndo_get_stats = cns3xxx_get_stats,
-+
-+#if defined(CNS3XXX_VLAN_8021Q)
-+ .ndo_vlan_rx_register = cns3xxx_vlan_rx_register,
-+ //.ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
-+ .ndo_vlan_rx_kill_vid = cns3xxx_vlan_rx_kill_vid,
-+#endif
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+ .ndo_poll_controller = cns3xxx_netpoll,
-+#endif
-+};
-+#endif // LINUX2631
-+
-+static int __init cns3xxx_probe(RingInfo ring_info)
-+{
-+ void cns3xxx_set_ethtool_ops(struct net_device *netdev);
-+
-+ int netdev_size = sizeof(net_device_prive)/sizeof(NetDevicePriv);
-+ int i=0, err=0;
-+ struct net_device *netdev=0;
-+ CNS3XXXPrivate *priv=0;
-+ struct sockaddr sock_addr;
-+
-+ for (i=0 ; i < netdev_size ; ++i) {
-+ if (init_port & (1 << i)) {
-+
-+ netdev = alloc_etherdev(sizeof(CNS3XXXPrivate));
-+ if (!netdev) {
-+ err = -ENOMEM;
-+ goto err_alloc_etherdev;
-+ }
-+ if (net_device_prive[i].name)
-+ strcpy(netdev->name, net_device_prive[i].name);
-+
-+
-+ net_dev_array[net_device_prive[i].vlan_tag] = netdev;
-+ if (intr_netdev==0)
-+ intr_netdev = netdev;
-+
-+ SET_NETDEV_DEV(netdev, NULL);
-+ priv = netdev_priv(netdev);
-+ spin_lock_init(&priv->lock);
-+ memset(priv, 0, sizeof(CNS3XXXPrivate));
-+
-+#if 1
-+ priv->num_rx_queues = ring_info.num_rx_queues;
-+ priv->num_tx_queues = ring_info.num_tx_queues;
-+ priv->rx_ring = ring_info.rx_ring;
-+ priv->tx_ring = ring_info.tx_ring;
-+#endif
-+
-+ priv->net_device_priv = &net_device_prive[i];
-+
-+ // set netdev MAC address
-+ memcpy(sock_addr.sa_data, net_device_prive[i].mac, 6);
-+ cns3xxx_set_mac_addr(netdev, &sock_addr);
-+
-+#ifdef LINUX2631
-+ netdev->netdev_ops = &cns3xxx_netdev_ops;
-+#endif
-+
-+ cns3xxx_set_ethtool_ops(netdev);
-+#ifdef LINUX2627
-+ //netdev->base_addr = IO_ADDRESS(GSW_BASE_ADDR);
-+ netdev->base_addr = 0;
-+ netdev->open = cns3xxx_open;
-+ netdev->stop = cns3xxx_close;
-+ netdev->hard_start_xmit = cns3xxx_send_packet;
-+ //netdev->hard_start_xmit = 0;
-+ netdev->do_ioctl = cns3xxx_do_ioctl;
-+ netdev->change_mtu = cns3xxx_change_mtu;
-+
-+ //netdev->get_stats = cns3xxx_get_stats;
-+ netdev->watchdog_timeo = 5 * HZ; // ref e1000_main.c
-+ netdev->tx_timeout = cns3xxx_timeout;
-+ netdev->set_mac_address = cns3xxx_set_mac_addr;
-+#endif
-+
-+#if defined(CNS3XXX_TX_HW_CHECKSUM)
-+ netdev->features |= (NETIF_F_IP_CSUM | NETIF_F_SG);
-+ //netdev->features |= (NETIF_F_HW_CSUM | NETIF_F_SG);
-+#endif
-+
-+
-+#ifdef CONFIG_CNS3XXX_NAPI
-+ //netif_napi_add(netdev, &priv->napi, cns3xxx_poll, CNS3XXX_NAPI_WEIGHT);
-+#endif
-+
-+#if defined(CNS3XXX_VLAN_8021Q)
-+ // do not let 8021Q module insert vlan tag
-+ // can use the snippet code to get vlan tage
-+ // if (priv->vlgrp && vlan_tx_tag_present(skb))
-+ // vlan_tag = cpu_to_be16(vlan_tx_tag_get(skb));
-+#ifdef CNS3XXX_8021Q_HW_TX
-+ // hardware support insert VLAN tag on TX path
-+ netdev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-+#else
-+ netdev->features |= NETIF_F_HW_VLAN_RX; // remove NETIF_F_HW_VLAN_TX flag that 8021Q module to insert vlan tag.
-+#endif
-+
-+ //netdev->vlan_rx_register = cns3xxx_vlan_rx_register;
-+ //netdev->vlan_rx_kill_vid = cns3xxx_vlan_rx_kill_vid;
-+#endif
-+
-+
-+ err = register_netdev(netdev);
-+ if (err) {
-+ goto err_register_netdev;
-+ }
-+
-+ netif_carrier_off(netdev);
-+ netdev = 0;
-+ }
-+ } // for (i=0 ; i < netdev_size ; ++i)
-+
-+ return 0;
-+
-+
-+err_register_netdev:
-+ free_netdev(netdev);
-+
-+err_alloc_etherdev:
-+ return err;
-+}
-+
-+int cns3xxx_gsw_config_mac_port0(void)
-+{
-+ INIT_PORT0_PHY
-+ INIT_PORT0_MAC
-+ PORT0_LINK_DOWN
-+ return 0;
-+}
-+
-+int cns3xxx_gsw_config_mac_port1(void)
-+{
-+ INIT_PORT1_PHY
-+ INIT_PORT1_MAC
-+ PORT1_LINK_DOWN
-+ return 0;
-+}
-+
-+int cns3xxx_gsw_config_mac_port2(void)
-+{
-+ INIT_PORT2_PHY
-+ INIT_PORT2_MAC
-+ PORT2_LINK_DOWN
-+ return 0;
-+}
-+
-+static int cns3xxx_notify_reboot(struct notifier_block *nb, unsigned long event, void *ptr)
-+{
-+ // stop the DMA
-+ enable_rx_dma(0, 0);
-+ enable_tx_dma(0, 0);
-+ enable_rx_dma(1, 0);
-+ enable_tx_dma(1, 0);
-+
-+ // disable Port 0
-+ enable_port(0, 0);
-+ enable_port(1, 0);
-+ enable_port(2, 0);
-+ enable_port(3, 0);
-+ return NOTIFY_DONE;
-+}
-+
-+#ifdef CONFIG_CNS3XXX_NAPI
-+static struct net_device *init_napi_dev(struct net_device *ndev, const RingInfo *ring_info)
-+{
-+ CNS3XXXPrivate *priv;
-+
-+ ndev = alloc_etherdev(sizeof(CNS3XXXPrivate));
-+ if (!ndev) {
-+ BUG();
-+ }
-+ priv = netdev_priv(ndev);
-+ memset(priv, 0, sizeof(CNS3XXXPrivate));
-+
-+ //priv = netdev_priv(napi_dev);
-+ priv->num_rx_queues = ring_info->num_rx_queues;
-+ priv->num_tx_queues = ring_info->num_tx_queues;
-+ priv->rx_ring = ring_info->rx_ring;
-+ priv->tx_ring = ring_info->tx_ring;
-+ //priv->is_qf=0; // because of memset, so need not the line
-+
-+ netif_napi_add(ndev, &priv->napi , cns3xxx_poll, CNS3XXX_NAPI_WEIGHT);
-+ dev_hold(ndev);
-+ set_bit(__LINK_STATE_START, &ndev->state);
-+
-+ return ndev;
-+}
-+#endif
-+
-+
-+void cns3xxx_config_intr(void)
-+{
-+ u32 v=0xffffffff;
-+
-+ get_interrupt_type(FSRC_RING0_INTERRUPT_ID, &v);
-+#if 1
-+ set_interrupt_type(FSRC_RING0_INTERRUPT_ID, RISING_EDGE);
-+ get_interrupt_type(FSRC_RING0_INTERRUPT_ID, &v);
-+
-+ get_interrupt_type(FSRC_RING1_INTERRUPT_ID, &v);
-+ set_interrupt_type(FSRC_RING1_INTERRUPT_ID, RISING_EDGE);
-+ get_interrupt_type(FSRC_RING1_INTERRUPT_ID, &v);
-+
-+ get_interrupt_type(FSQF_RING0_INTERRUPT_ID, &v);
-+ set_interrupt_type(FSQF_RING0_INTERRUPT_ID, RISING_EDGE);
-+ get_interrupt_type(FSQF_RING0_INTERRUPT_ID, &v);
-+
-+ get_interrupt_type(FSQF_RING1_INTERRUPT_ID, &v);
-+ set_interrupt_type(FSQF_RING1_INTERRUPT_ID, RISING_EDGE);
-+ get_interrupt_type(FSQF_RING1_INTERRUPT_ID, &v);
-+
-+ #ifdef CNS3XXX_USE_MASK
-+ get_interrupt_pri(FSRC_RING0_INTERRUPT_ID, &v);
-+ set_interrupt_pri(FSRC_RING0_INTERRUPT_ID, 0xc);
-+ get_interrupt_pri(FSRC_RING0_INTERRUPT_ID, &v);
-+
-+ get_interrupt_pri(FSRC_RING1_INTERRUPT_ID, &v);
-+ set_interrupt_pri(FSRC_RING1_INTERRUPT_ID, 0xc);
-+ get_interrupt_pri(FSRC_RING1_INTERRUPT_ID, &v);
-+
-+ get_interrupt_pri(FSQF_RING1_INTERRUPT_ID, &v);
-+ set_interrupt_pri(FSQF_RING1_INTERRUPT_ID, 0xc);
-+ get_interrupt_pri(FSQF_RING1_INTERRUPT_ID, &v);
-+
-+ #ifndef CONFIG_CNS3XXX_NAPI
-+ set_interrupt_pri(FSQF_RING0_INTERRUPT_ID, 0xc);
-+ #endif
-+
-+
-+ #endif // CNS3XXX_USE_MASK
-+#endif
-+}
-+
-+static int __devinit cns3xxx_init(struct platform_device *pdev)
-+{
-+ // when tx_ring/rx_ring alloc memory,
-+ // don't free them until cns3xxx_exit_module
-+
-+ struct eth_plat_info *plat = pdev->dev.platform_data;
-+ init_port = plat->ports;
-+ memcpy(cpu_vlan_table_entry.my_mac, plat->cpu_hwaddr, ETH_ALEN);
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+ memcpy(net_device_prive[3].mac, plat->cpu_hwaddr, ETH_ALEN);
-+#endif
-+
-+ RingInfo ring_info;
-+ int i=0;
-+ //spin_lock_init(&star_gsw_send_lock);
-+
-+
-+#ifdef CNS3XXX_DOUBLE_RX_RING
-+ ring_info.num_rx_queues = 2;
-+#else
-+ ring_info.num_rx_queues = 1;
-+#endif
-+
-+#ifdef CNS3XXX_DOUBLE_TX_RING
-+ ring_info.num_tx_queues = 2;
-+#else
-+ ring_info.num_tx_queues = 1;
-+#endif
-+
-+ ring_info.rx_ring = kcalloc(ring_info.num_rx_queues, sizeof(RXRing), GFP_KERNEL);
-+ if (!ring_info.rx_ring)
-+ return -ENOMEM;
-+
-+ for (i=0 ; i < ring_info.num_rx_queues ; ++i) {
-+ memset(ring_info.rx_ring + i, 0, sizeof(RXRing));
-+ }
-+
-+
-+ ring_info.tx_ring = kcalloc(ring_info.num_tx_queues, sizeof(TXRing), GFP_KERNEL);
-+
-+
-+ if (!ring_info.tx_ring)
-+ return -ENOMEM;
-+
-+ for (i=0 ; i < ring_info.num_tx_queues ; ++i) {
-+ memset(ring_info.tx_ring + i, 0, sizeof(TXRing));
-+ }
-+
-+
-+ g_ring_info = ring_info;
-+
-+ cns3xxx_gsw_hw_init();
-+
-+#ifdef CONFIG_FPGA
-+ // GIGA mode disable
-+ MAC0_CFG_REG &= (~(1<<16));
-+ MAC1_CFG_REG &= (~(1<<16));
-+ MAC2_CFG_REG &= (~(1<<16));
-+#endif
-+
-+ if ((init_port & 1) == 1) {
-+ memcpy(vlan_table_entry[0].my_mac, plat->eth0_hwaddr, ETH_ALEN);
-+ memcpy(arl_table_entry[0].mac, plat->eth0_hwaddr, ETH_ALEN);
-+ memcpy(net_device_prive[0].mac, plat->eth0_hwaddr, ETH_ALEN);
-+ cns3xxx_gsw_config_mac_port0();
-+ }
-+
-+ if (((init_port >> 1) & 1) == 1) {
-+ memcpy(vlan_table_entry[1].my_mac, plat->eth1_hwaddr, ETH_ALEN);
-+ memcpy(arl_table_entry[1].mac, plat->eth1_hwaddr, ETH_ALEN);
-+ memcpy(net_device_prive[1].mac, plat->eth1_hwaddr, ETH_ALEN);
-+ cns3xxx_gsw_config_mac_port1();
-+ }
-+
-+ if (((init_port >> 2) & 1) == 1) {
-+ memcpy(vlan_table_entry[2].my_mac, plat->eth2_hwaddr, ETH_ALEN);
-+ memcpy(arl_table_entry[2].mac, plat->eth2_hwaddr, ETH_ALEN);
-+ memcpy(net_device_prive[2].mac, plat->eth2_hwaddr, ETH_ALEN);
-+ cns3xxx_gsw_config_mac_port2();
-+ }
-+
-+ cns3xxx_probe(ring_info);
-+ cns3xxx_config_intr();
-+
-+#ifdef CNS3XXX_VLAN_8021Q
-+#ifdef CNS3XXX_NIC_MODE_8021Q
-+ cns3xxx_nic_mode(1);
-+#endif
-+#endif
-+ spin_lock_init(&tx_lock);
-+ spin_lock_init(&rx_lock);
-+
-+#ifdef CONFIG_CNS3XXX_NAPI
-+ napi_dev = init_napi_dev(napi_dev, &ring_info);
-+ #ifdef CNS3XXX_DOUBLE_RX_RING
-+ r1_napi_dev = init_napi_dev(r1_napi_dev, &ring_info);
-+ #endif
-+#endif
-+
-+ register_reboot_notifier(&cns3xxx_notifier_reboot);
-+ clear_fs_dma_state(0);
-+
-+ if (ring_info.num_rx_queues == 2) {
-+ // enable RX dobule ring
-+ DMA_RING_CTRL_REG |= 1;
-+ }
-+
-+ if (ring_info.num_tx_queues == 2 ) {
-+ // enable TX dobule ring
-+ DMA_RING_CTRL_REG |= (1 << 16);
-+ }
-+
-+
-+ return 0;
-+}
-+
-+static int __devexit cns3xxx_remove(struct platform_device *pdev)
-+{
-+ int i=0;
-+
-+#if 1
-+ for (i=0 ; i < NETDEV_SIZE ; ++i) {
-+ CNS3XXXPrivate *priv = 0;
-+
-+ if (net_dev_array[i]){
-+ priv = netdev_priv(net_dev_array[i]);
-+
-+ kfree(priv->tx_ring);
-+ priv->tx_ring = 0;
-+
-+ kfree(priv->rx_ring);
-+ priv->rx_ring = 0;
-+
-+ unregister_netdev(net_dev_array[i]);
-+ free_netdev(net_dev_array[i]);
-+ }
-+
-+
-+#if 0
-+ sprintf(netdev_name, "eth%d", i);
-+ netdev=__dev_get_by_name(&init_net, netdev_name);
-+ // if no unregister_netdev and free_netdev,
-+ // after remove module, ifconfig will hang.
-+ #if 1
-+ if (netdev) {
-+ unregister_netdev(netdev);
-+ free_netdev(netdev);
-+ }
-+#endif
-+ #endif
-+ }
-+#endif
-+
-+#ifdef CONFIG_CNS3XXX_NAPI
-+ free_netdev(napi_dev);
-+ #ifdef CNS3XXX_DOUBLE_RX_RING
-+ free_netdev(r1_napi_dev);
-+ #endif
-+#endif
-+
-+
-+#if 0
-+ //star_gsw_buffer_free();
-+#endif
-+ unregister_reboot_notifier(&cns3xxx_notifier_reboot);
-+}
-+
-+
-+// this snippet code ref 8139cp.c
-+#if defined(CNS3XXX_VLAN_8021Q)
-+void cns3xxx_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
-+{
-+ CNS3XXXPrivate *priv = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->lock, flags);
-+ priv->vlgrp = grp;
-+ spin_unlock_irqrestore(&priv->lock, flags);
-+}
-+
-+void cns3xxx_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
-+{
-+ CNS3XXXPrivate *priv = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->lock, flags);
-+ // reference: linux-2.6.24-current/drivers/netvia-velocity.c
-+ vlan_group_set_device(priv->vlgrp, vid, NULL);
-+ //priv->vlgrp->vlan_devices[vid] = NULL;
-+ spin_unlock_irqrestore(&priv->lock, flags);
-+}
-+
-+#endif
-+
-+static struct platform_driver drv = {
-+ .driver.name = "cns3xxx-net",
-+ .probe = cns3xxx_init,
-+ .remove = cns3xxx_remove,
-+};
-+
-+static int __init cns3xxx_init_module(void)
-+{
-+ return platform_driver_register(&drv);
-+}
-+
-+static void __exit cns3xxx_exit_module(void)
-+{
-+ platform_driver_unregister(&drv);
-+}
-+
-+MODULE_AUTHOR("Cavium Networks, <tech@XXXX.com>");
-+MODULE_DESCRIPTION("CNS3XXX Switch Driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(cns3xxx_init_module);
-+module_exit(cns3xxx_exit_module);
-+
---- /dev/null
-+++ b/drivers/net/cns3xxx/cns3xxx_phy.c
-@@ -0,0 +1,1968 @@
-+/*******************************************************************************
-+ *
-+ *
-+ * Copyright (c) 2009 Cavium Networks
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the Free
-+ * Software Foundation; either version 2 of the License, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+1* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program; if not, write to the Free Software Foundation, Inc., 59
-+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this distribution in the
-+ * file called LICENSE.
-+ *
-+ ********************************************************************************/
-+
-+#include "cns3xxx_phy.h"
-+#include "cns3xxx_symbol.h"
-+
-+
-+#if defined(LINUX_KERNEL)
-+#include "cns3xxx_tool.h"
-+#include <linux/cns3xxx/switch_api.h> // for CAVM_OK ... macro
-+#include <linux/delay.h>
-+#include "cns3xxx_config.h"
-+#else // u-boot
-+#include <common.h>
-+#include "cns3xxx_switch_type.h"
-+#define printk printf
-+#endif
-+
-+int cns3xxx_phy_reset(u8 phy_addr)
-+{
-+ u16 phy_data=0;
-+
-+ if (cns3xxx_read_phy(phy_addr, 0, &phy_data) != CAVM_OK)
-+ return CAVM_ERR;
-+ phy_data |= (0x1 << 15);
-+ if (cns3xxx_write_phy(phy_addr, 0, phy_data) != CAVM_OK)
-+ return CAVM_ERR;
-+
-+ return CAVM_OK;
-+}
-+
-+// mac_port: 0, 1, 2
-+int cns3xxx_enable_mac_clock(u8 mac_port, u8 en)
-+{
-+ switch (mac_port)
-+ {
-+ case 0:
-+ {
-+ (en==1)?(PHY_AUTO_ADDR_REG |= 1 << 7) :(PHY_AUTO_ADDR_REG &= (~(1 << 7)) );
-+ break;
-+ }
-+ case 1:
-+ {
-+ (en==1)?(PHY_AUTO_ADDR_REG |= (1 << 15)) :(PHY_AUTO_ADDR_REG &= (~(1 << 15)) );
-+ break;
-+ }
-+ case 2:
-+ {
-+ (en==1)?(PHY_AUTO_ADDR_REG |= (1 << 23)) :(PHY_AUTO_ADDR_REG &= (~(1 << 23)) );
-+ break;
-+ }
-+ }
-+
-+ return CAVM_OK;
-+}
-+
-+// dis: 1 disable
-+// dis: 0 enable
-+int cns3xxx_phy_auto_polling_enable(u8 port, u8 en)
-+{
-+ u8 phy_addr[]={5, 13, 21};
-+
-+ PHY_AUTO_ADDR_REG &= (~(1 << phy_addr[port]));
-+ if (en) {
-+ PHY_AUTO_ADDR_REG |= (1 << phy_addr[port]);
-+ }
-+ return CAVM_OK;
-+}
-+
-+// dis: 1 disable
-+// dis: 0 enable
-+int cns3xxx_mdc_mdio_disable(u8 dis)
-+{
-+
-+ PHY_CTRL_REG &= (~(1 << 7));
-+ if (dis) {
-+ PHY_CTRL_REG |= (1 << 7);
-+ }
-+ return CAVM_OK;
-+}
-+
-+
-+static int cns3xxx_phy_auto_polling_conf(int mac_port, u8 phy_addr)
-+{
-+ if ( (mac_port < 0) || (mac_port > 2) ) {
-+ return CAVM_ERR;
-+ }
-+
-+ switch (mac_port)
-+ {
-+ case 0:
-+ {
-+ PHY_AUTO_ADDR_REG &= (~0x1f);
-+ PHY_AUTO_ADDR_REG |= phy_addr;
-+ break;
-+ }
-+ case 1:
-+ {
-+ PHY_AUTO_ADDR_REG &= (~(0x1f << 8));
-+ PHY_AUTO_ADDR_REG |= (phy_addr << 8);
-+ break;
-+ }
-+ case 2:
-+ {
-+ PHY_AUTO_ADDR_REG &= (~(0x1f << 16));
-+ PHY_AUTO_ADDR_REG |= (phy_addr << 16);
-+ break;
-+ }
-+ }
-+ cns3xxx_phy_auto_polling_enable(mac_port, 1);
-+ return CAVM_OK;
-+}
-+
-+
-+
-+int cns3xxx_read_phy(u8 phy_addr, u8 phy_reg, u16 *read_data)
-+{
-+ int delay=0;
-+ u32 volatile tmp = PHY_CTRL_REG;
-+
-+ PHY_CTRL_REG |= (1 << 15); // clear "command completed" bit
-+ // delay
-+ for (delay=0; delay<10; delay++);
-+ tmp &= (~0x1f);
-+ tmp |= phy_addr;
-+
-+ tmp &= (~(0x1f << 8));
-+ tmp |= (phy_reg << 8);
-+
-+ tmp |= (1 << 14); // read command
-+
-+ PHY_CTRL_REG = tmp;
-+
-+ // wait command complete
-+ while ( ((PHY_CTRL_REG >> 15) & 1) == 0);
-+
-+ *read_data = (PHY_CTRL_REG >> 16);
-+
-+ PHY_CTRL_REG |= (1 << 15); // clear "command completed" bit
-+
-+ return CAVM_OK;
-+}
-+
-+int cns3xxx_write_phy(u8 phy_addr, u8 phy_reg, u16 write_data)
-+{
-+ int delay=0;
-+ u32 tmp = PHY_CTRL_REG;
-+
-+ PHY_CTRL_REG |= (1 << 15); // clear "command completed" bit
-+ // delay
-+ for (delay=0; delay<10; delay++);
-+
-+ tmp &= (~(0xffff << 16));
-+ tmp |= (write_data << 16);
-+
-+ tmp &= (~0x1f);
-+ tmp |= phy_addr;
-+
-+ tmp &= (~(0x1f << 8));
-+ tmp |= (phy_reg << 8);
-+
-+ tmp |= (1 << 13); // write command
-+
-+ PHY_CTRL_REG = tmp;
-+
-+ // wait command complete
-+ while ( ((PHY_CTRL_REG >> 15) & 1) == 0);
-+
-+ return CAVM_OK;
-+}
-+
-+// port 0,1,2
-+void cns3xxx_rxc_dly(u8 port, u8 val)
-+{
-+ switch (port)
-+ {
-+ case 0:
-+ {
-+ SLK_SKEW_CTRL_REG &= (~(0x3 << 4));
-+ SLK_SKEW_CTRL_REG |= (val << 4);
-+ break;
-+ }
-+ case 1:
-+ {
-+ SLK_SKEW_CTRL_REG &= (~(0x3 << 12));
-+ SLK_SKEW_CTRL_REG |= (val << 12);
-+ break;
-+ }
-+ case 2:
-+ {
-+ SLK_SKEW_CTRL_REG &= (~(0x3 << 20));
-+ SLK_SKEW_CTRL_REG |= (val << 20);
-+ break;
-+ }
-+ }
-+}
-+
-+// port 0,1,2
-+void cns3xxx_txc_dly(u8 port, u8 val)
-+{
-+ switch (port)
-+ {
-+ case 0:
-+ {
-+ SLK_SKEW_CTRL_REG &= (~(0x3 << 6));
-+ SLK_SKEW_CTRL_REG |= (val << 6);
-+ break;
-+ }
-+ case 1:
-+ {
-+ SLK_SKEW_CTRL_REG &= (~(0x3 << 14));
-+ SLK_SKEW_CTRL_REG |= (val << 14);
-+ break;
-+ }
-+ case 2:
-+ {
-+ SLK_SKEW_CTRL_REG &= (~(0x3 << 22));
-+ SLK_SKEW_CTRL_REG |= (val << 22);
-+ break;
-+ }
-+ }
-+}
-+
-+void cns3xxx_mac2_gtxd_dly(u8 val)
-+{
-+ SLK_SKEW_CTRL_REG &= (~(0x3 << 24));
-+ SLK_SKEW_CTRL_REG |= (val << 24);
-+}
-+
-+// VITESSE suggest use isolate bit.
-+int vsc8601_power_down(int phy_addr, int y)
-+{
-+ u16 phy_data = 0;
-+ /* set isolate bit instead of powerdown */
-+ cns3xxx_read_phy(phy_addr, 0, &phy_data);
-+ if (y==1) // set isolate
-+ phy_data |= (0x1 << 10);
-+ if (y==0) // unset isolate
-+ phy_data &= (~(0x1 << 10));
-+ cns3xxx_write_phy(phy_addr, 0, phy_data);
-+
-+ return 0;
-+}
-+
-+
-+// port : 0 => port0 ; port : 1 => port1
-+// y = 1 ; disable AN
-+void disable_AN(int port, int y)
-+{
-+ u32 mac_port_config=0;
-+
-+ switch (port)
-+ {
-+ case 0:
-+ {
-+ mac_port_config = MAC0_CFG_REG;
-+ break;
-+ }
-+ case 1:
-+ {
-+ mac_port_config = MAC1_CFG_REG;
-+ break;
-+ }
-+ case 2:
-+ {
-+ mac_port_config = MAC2_CFG_REG;
-+ break;
-+ }
-+ }
-+
-+
-+ // disable PHY's AN
-+ if (y==1)
-+ {
-+ mac_port_config &= ~(0x1 << 7);
-+ }
-+
-+ // enable PHY's AN
-+ if (y==0)
-+ {
-+ mac_port_config |= (0x1 << 7);
-+ }
-+
-+ switch (port)
-+ {
-+ case 0:
-+ {
-+ MAC0_CFG_REG = mac_port_config;
-+ break;
-+ }
-+ case 1:
-+ {
-+ MAC1_CFG_REG = mac_port_config;
-+ break;
-+ }
-+ case 2:
-+ {
-+ MAC2_CFG_REG = mac_port_config;
-+ break;
-+ }
-+ }
-+}
-+
-+int cns3xxx_std_phy_power_down(int phy_addr, int y)
-+{
-+ u16 phy_data = 0;
-+ // power-down or up the PHY
-+ cns3xxx_read_phy(phy_addr, 0, &phy_data);
-+ if (y==1) // down
-+ phy_data |= (0x1 << 11);
-+ if (y==0) // up
-+ phy_data &= (~(0x1 << 11));
-+ cns3xxx_write_phy(phy_addr, 0, phy_data);
-+
-+ phy_data=0;
-+ cns3xxx_read_phy(phy_addr, 0, &phy_data);
-+
-+ return 0;
-+}
-+
-+
-+#if defined(LINUX_KERNEL)
-+int cns3xxx_spi_tx_rx_n(u32 tx_data, u32 *rx_data, u32 tx_channel, u32 tx_eof_flag)
-+{
-+ u8 cns3xxx_spi_tx_rx(u8 tx_channel, u8 tx_eof, u32 tx_data, u32 * rx_data);
-+
-+ return cns3xxx_spi_tx_rx(tx_channel, tx_eof_flag, tx_data, rx_data);
-+}
-+
-+int bcm53115M_reg_read(int page, int offset, u8 *buf, int len)
-+{
-+ u32 ch = BCM53115_SPI_CHANNEL;
-+ u8 cmd_byte;
-+ u32 dumy_word;
-+ u32 spi_status;
-+ int i;
-+
-+ /*
-+ * Normal SPI Mode (Command Byte)
-+ * Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
-+ * 0 1 1 Mode=0 CHIP_ID2 ID1 ID0(lsb) Rd/Wr(0/1)
-+ *
-+ */
-+
-+ /* Normal Read Operation */
-+ /* 1. Issue a normal read command(0x60) to poll the SPIF bit in the
-+ SPI status register(0XFE) to determine the operation can start */
-+ do
-+ {
-+ cmd_byte = 0x60;
-+ cns3xxx_spi_tx_rx_n(cmd_byte, &dumy_word, ch, 0);
-+ cns3xxx_spi_tx_rx_n(0xFE, &dumy_word, ch, 0);
-+ cns3xxx_spi_tx_rx_n(0x00, &spi_status, ch, 1);
-+ udelay(100);
-+ }while ((spi_status >> ROBO_SPIF_BIT) & 1) ; // wait SPI bit to 0
-+
-+ /* 2. Issue a normal write command(0x61) to write the register page value
-+ into the SPI page register(0xFF) */
-+ cmd_byte = 0x61;
-+ cns3xxx_spi_tx_rx_n(cmd_byte, &dumy_word, ch, 0);
-+ cns3xxx_spi_tx_rx_n(0xFF, &dumy_word, ch, 0);
-+ cns3xxx_spi_tx_rx_n(page, &dumy_word, ch, 1);
-+
-+ /* 3. Issue a normal read command(0x60) to setup the required RobiSwitch register
-+ address */
-+ cmd_byte = 0x60;
-+ cns3xxx_spi_tx_rx_n(cmd_byte, &dumy_word, ch, 0);
-+ cns3xxx_spi_tx_rx_n(offset, &dumy_word, ch, 0);
-+ cns3xxx_spi_tx_rx_n(0x00, &dumy_word, ch, 1);
-+
-+ /* 4. Issue a normal read command(0x60) to poll the RACK bit in the
-+ SPI status register(0XFE) to determine the completion of read */
-+ do
-+ {
-+ cmd_byte = 0x60;
-+ cns3xxx_spi_tx_rx_n(cmd_byte, &dumy_word, ch, 0);
-+ cns3xxx_spi_tx_rx_n(0xFE, &dumy_word, ch, 0);
-+ cns3xxx_spi_tx_rx_n(0x00, &spi_status, ch, 1);
-+ udelay(100);
-+ }while (((spi_status >> ROBO_RACK_BIT) & 1) == 0); // wait RACK bit to 1
-+
-+ /* 5. Issue a normal read command(0x60) to read the specific register's conternt
-+ placed in the SPI data I/O register(0xF0) */
-+ cmd_byte = 0x60;
-+ cns3xxx_spi_tx_rx_n(cmd_byte, &dumy_word, ch, 0);
-+ cns3xxx_spi_tx_rx_n(0xF0, &dumy_word, ch, 0);
-+ // read content
-+ for (i=0; i<len; i++) {
-+ cns3xxx_spi_tx_rx_n(0x00, &dumy_word, ch, ((i==(len-1)) ? 1 : 0));
-+ buf[i] = (u8)dumy_word;
-+ }
-+
-+ return 0;
-+
-+}
-+
-+int bcm53115M_reg_write(int page, int offset, u8 *buf, int len)
-+{
-+ u32 ch = BCM53115_SPI_CHANNEL;
-+ u8 cmd_byte;
-+ u32 dumy_word;
-+ u32 spi_status;
-+ int i;
-+
-+ /*
-+ * Normal SPI Mode (Command Byte)
-+ * Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
-+ * 0 1 1 Mode=0 CHIP_ID2 ID1 ID0(lsb) Rd/Wr(0/1)
-+ *
-+ */
-+
-+ /* Normal Write Operation */
-+ /* 1. Issue a normal read command(0x60) to poll the SPIF bit in the
-+ SPI status register(0XFE) to determine the operation can start */
-+
-+ do
-+ {
-+ cmd_byte = 0x60;
-+ cns3xxx_spi_tx_rx_n(cmd_byte, &dumy_word, ch, 0);
-+ cns3xxx_spi_tx_rx_n(0xFE, &dumy_word, ch, 0);
-+ cns3xxx_spi_tx_rx_n(0x00, &spi_status, ch, 1);
-+ }while ((spi_status >> ROBO_SPIF_BIT) & 1) ; // wait SPI bit to 0
-+
-+ /* 2. Issue a normal write command(0x61) to write the register page value
-+ into the SPI page register(0xFF) */
-+ cmd_byte = 0x61;
-+ cns3xxx_spi_tx_rx_n((u32)cmd_byte, &dumy_word, ch, 0);
-+ cns3xxx_spi_tx_rx_n(0xFF, &dumy_word, ch, 0);
-+ cns3xxx_spi_tx_rx_n(page, &dumy_word, ch, 1);
-+
-+ /* 3. Issue a normal write command(0x61) and write the address of the accessed
-+ register followed by the write content starting from a lower byte */
-+ cmd_byte = 0x61;
-+ cns3xxx_spi_tx_rx_n((u32)cmd_byte, &dumy_word, ch, 0);
-+ cns3xxx_spi_tx_rx_n(offset, &dumy_word, ch, 0);
-+ // write content
-+ for (i=0; i<len; i++) {
-+ cns3xxx_spi_tx_rx_n((u32)buf[i], &dumy_word, ch, ((i==(len-1)) ? 1 : 0));
-+ }
-+
-+ return 0;
-+}
-+
-+int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
-+
-+void bcm53115M_init_mac(u8 mac_port, u16 phy_addr)
-+{
-+ u32 mac_port_config = 0;
-+ u8 mac_addr[]={0x0c, 0x10, 0x18};
-+
-+ cns3xxx_enable_mac_clock(mac_port, 1);
-+ cns3xxx_phy_auto_polling_enable(mac_port, 0);
-+
-+ mac_port_config = SWITCH_REG_VALUE(mac_addr[mac_port]);
-+
-+ // enable GMII, MII, reverse MII
-+ mac_port_config &= (~(1 << 15));
-+
-+ // enable RGMII
-+ mac_port_config |= (1 << 15);
-+
-+ // disable GIGA mode
-+ mac_port_config &= (~(1<<16));
-+
-+ // enable GIGA mode
-+ mac_port_config |= (1<<16);
-+
-+ // disable PHY's AN
-+ mac_port_config &= (~(0x1 << 7));
-+
-+ // force 1000Mbps
-+ mac_port_config &= (~(0x3 << 8));
-+ mac_port_config |= (0x2 << 8);
-+
-+ // force duplex
-+ mac_port_config |= (0x1 << 10);
-+
-+ // TX flow control on
-+ mac_port_config |= (0x1 << 12);
-+
-+ // RX flow control on
-+ mac_port_config |= (0x1 << 11);
-+
-+ // Turn off GSW_PORT_TX_CHECK_EN_BIT
-+ mac_port_config &= (~(0x1 << 13));
-+
-+ // Turn on GSW_PORT_TX_CHECK_EN_BIT
-+ mac_port_config |= (0x1 << 13);
-+
-+ SWITCH_REG_VALUE(mac_addr[mac_port]) = mac_port_config;
-+}
-+
-+typedef struct bcm53115M_vlan_entry_t
-+{
-+ u16 vid;
-+ u16 forward_map;
-+ u16 untag_map;
-+}bcm53115M_vlan_entry;
-+
-+
-+
-+int bcm53115M_write_vlan(bcm53115M_vlan_entry *v)
-+{
-+ u8 bval;
-+ u16 wval;
-+ u32 dwval;
-+
-+ // fill vid
-+ wval = (u16)v->vid;
-+ bcm53115M_reg_write(0x05, 0x81, (u8*)&wval, 2);
-+
-+ // fill table content
-+ dwval = 0;
-+ dwval |= (v->forward_map & 0x1FF);
-+ dwval |= ((v->untag_map& 0x1FF) << 9);
-+ bcm53115M_reg_write(0x05, 0x83, (u8*)&wval, 4);
-+
-+ // write cmd
-+ bval = VLAN_WRITE_CMD;
-+ bval |= (1 << VLAN_START_BIT);
-+ bcm53115M_reg_write(0x05, 0x80, (u8*)&bval, 1);
-+
-+ // wait cmd complete
-+ while(1) {
-+ bcm53115M_reg_read(0x05, 0x80, (u8*)&bval, 1);
-+ if (((bval >> VLAN_START_BIT) & 1) == 0) break;
-+ }
-+
-+ return CAVM_OK;
-+}
-+
-+typedef struct bcm_port_cfg_t
-+{
-+ u8 link;
-+ u8 fdx;
-+ BCM_PORT_SPEED speed;
-+ u8 rx_flw_ctrl;
-+ u8 tx_flw_ctrl;
-+ u8 ow;
-+}bcm_port_cfg;
-+
-+
-+
-+int bcm53115M_mac_port_config(int port, bcm_port_cfg *cfg)
-+{
-+ u8 bval = 0;
-+ int page, addr;
-+
-+ if (cfg->link) bval |= (1<<0);
-+ if (cfg->fdx) bval |= (1<<1);
-+ bval |= ((cfg->speed&0x3) << 2);
-+ if (cfg->rx_flw_ctrl) bval |= (1<<4);
-+ if (cfg->tx_flw_ctrl) bval |= (1<<5);
-+
-+ if (port == BCM_PORT_IMP) {
-+ bval |= (1<<7); // Use content of this register
-+ page = 0x00;
-+ addr = 0x0E;
-+ }else {
-+ page = 0x00;
-+ addr = 0x58+port;
-+ }
-+
-+ bcm53115M_reg_write(page, addr, &bval, 1);
-+
-+ return 0;
-+}
-+
-+int bcm53115M_init_internal_phy(void)
-+{
-+ int p, page;
-+ u16 wval;
-+
-+ for (p=BCM_PORT_0; p<=BCM_PORT_4; p++) {
-+ page = 0x10+p;
-+
-+ // reset phy
-+ bcm53115M_reg_read(page, 0x00, (u8*)&wval, 2);
-+ wval |= 0x8000;
-+ bcm53115M_reg_write(page, 0x00, (u8*)&wval, 2);
-+
-+ // config auto-nego & all advertisement
-+ bcm53115M_reg_read(page, 0x00, (u8*)&wval, 2);
-+ wval |= (1<<12); // auto-nego
-+ bcm53115M_reg_write(page, 0x00, (u8*)&wval, 2);
-+
-+ bcm53115M_reg_read(page, 0x08, (u8*)&wval, 2);
-+ wval |= 0x1E0; // advertisement all
-+ bcm53115M_reg_write(page, 0x08, (u8*)&wval, 2);
-+
-+ // 1000BASE-T
-+ bcm53115M_reg_read(page, 0x12, (u8*)&wval, 2);
-+ wval &= ~(1<<12); // automatic master/slave configuration
-+ wval |= 0x300; // 1000-base full/half advertisements
-+ bcm53115M_reg_write(page, 0x12, (u8*)&wval, 2);
-+ }
-+
-+ return 0;
-+}
-+
-+int bcm53115M_led_init(void)
-+{
-+ u16 led_func, bval, wval;
-+
-+ /* LED function 1G/ACT, 100M/ACT, 10M/ACT, not used */
-+ led_func = 0x2C00;
-+ bcm53115M_reg_write(0x00, 0x10, (u8*)&led_func, 2);
-+ bcm53115M_reg_write(0x00, 0x12, (u8*)&led_func, 2);
-+
-+ /* LED map enable */
-+ wval = 0x1F; // port0~4
-+ bcm53115M_reg_write(0x00, 0x16, (u8*)&wval, 2);
-+
-+ /* LED mode map */
-+ wval = 0x1F; // led auto mode
-+ bcm53115M_reg_write(0x00, 0x18, (u8*)&wval, 2);
-+ bcm53115M_reg_write(0x00, 0x1A, (u8*)&wval, 2);
-+
-+ /* LED enable */
-+ bcm53115M_reg_read(0x00, 0x0F, (u8*)&bval, 1);
-+ bval |= 0x80;
-+ bcm53115M_reg_write(0x00, 0x0F, (u8*)&bval, 1);
-+
-+ return 0;
-+}
-+
-+//#define BCM53115M_DUMMY_SWITCH
-+#define BCM53115M_DISABLE_LEARNING
-+
-+int bcm53115M_init(u8 mac_port, u16 phy_addr)
-+{
-+ u32 u32_val=0;
-+ u16 u16_val=0;
-+ u8 bval=0;
-+ int i=0;
-+ bcm53115M_vlan_entry v_ent;
-+ bcm_port_cfg pc;
-+ u8 page=0, offset=0;
-+
-+ printk("bcm53115M init\n");
-+
-+ memset(&v_ent, 0, sizeof(bcm53115M_vlan_entry));
-+
-+ // gpio B pin 18
-+ gpio_direction_output(50, 0);
-+ bcm53115M_init_mac(0, 0);
-+ bcm53115M_init_mac(1, 1);
-+
-+ // read device id
-+ bcm53115M_reg_read(0x02, 0x30, (u8*)&u32_val, 4);
-+ printk("bcm53115M device id:(0x%x)\r\n", u32_val);
-+
-+ if (u32_val != 0x53115) {
-+ printk("bad device id(0x%x)\r\n", u32_val);
-+ return -1;
-+ }
-+
-+ u16_val=0;
-+ // read phy id
-+ bcm53115M_reg_read(0x10, 0x04, (u8 *)&u16_val, 2);
-+ printk("bcm53115M phy id_1:(0x%x)\r\n", u16_val);
-+
-+ if (u16_val != 0x143) {
-+ printk("bad phy id1(0x%x)\r\n", u16_val);
-+ return CAVM_ERR;
-+ }
-+
-+ u16_val=0;
-+ // read phy id2
-+ bcm53115M_reg_read(0x10, 0x06, (u8 *)&u16_val, 2);
-+ printk("bcm53115M phy id_2:(0x%x)\r\n", u16_val);
-+
-+#ifdef BCM53115M_DUMMY_SWITCH
-+ bval=0;
-+ bcm53115M_reg_read(0x00, 0x0e, (u8 *)&bval, 1);
-+ printk("bcm53115M page:0 addr:0x0e ## %x\n", bval);
-+ bval |= (1 << 7);
-+ bval |= 1;
-+
-+ bval = 0x8b;
-+ bval |= (1 << 5);
-+ bval |= (1 << 4);
-+ printk("bval : %x\n", bval);
-+ bcm53115M_reg_write(0x00, 0x0e, (u8 *)&bval, 1);
-+ bcm53115M_reg_read(0x00, 0x0e, (u8 *)&bval, 1);
-+ printk("bcm53115M page:0 addr:0x0e ## %x\n", bval);
-+
-+ /* Unmanagement mode */
-+ // Switch Mode. Page 00h,Address 0Bh
-+ bval = 0x06; // forward enable, unmanaged mode
-+ //bval = 0x3; // forward enable, managed mode
-+ bcm53115M_reg_write(0x0, 0xb, &bval, 1);
-+ bcm53115M_reg_read(0x0, 0xb, (u8 *)&bval, 1);
-+ printk("bcm53115M page:0 addr:0xb ## %x\n", bval);
-+
-+ page=0x0;
-+ offset=0x5d; // port 5
-+ bval=0x7b;
-+ bcm53115M_reg_write(page, offset, (u8 *)&bval, 1);
-+ bcm53115M_reg_read(page, offset, (u8 *)&bval, 1);
-+
-+ printk("bcm53115M page:%x addr:%x ## %x\n", page, offset, bval);
-+
-+ page=0x0;
-+ offset=0x58; // port 0
-+ bval=0x7b;
-+ bcm53115M_reg_write(page, offset, (u8 *)&bval, 1);
-+ bcm53115M_reg_read(page, offset, (u8 *)&bval, 1);
-+ printk("bcm53115M page:%x addr:%x ## %x\n", page, offset, bval);
-+
-+#ifdef CONFIG_CNS3XXX_JUMBO_FRAME
-+ printk("enable BCM53115 jumbo frame\n");
-+
-+ page=0x40;
-+ offset=0x01;
-+ u32_val=0x013f; // enable 0-5 port and IMP port jumbo frame. MAX frame: 9720 bytes.
-+ bcm53115M_reg_write(page, offset, (u8 *)&u32_val, 4);
-+ bcm53115M_reg_read(page, offset, (u8 *)&u32_val, 4);
-+ printk("bcm53115M page:%x addr:%x ## %x\n", page, offset, u32_val);
-+
-+#if 0
-+ page=0x40;
-+ offset=0x05;
-+ u16_val=0;
-+ bcm53115M_reg_write(page, offset, (u8 *)&u16_val, 2);
-+#endif
-+
-+#endif
-+
-+#else // !BCM53115M_DUMMY_SWITCH
-+ /* Loop detection disable */
-+ bcm53115M_reg_read(0x72, 0x00, (u8 *)&u16_val, 2);
-+ u16_val &= ~(0x3<<11);
-+ bcm53115M_reg_write(0x72, 0x00, (u8 *)&u16_val, 2);
-+
-+
-+ /* VLAN forwarding mask */
-+ // Bit8 IMP port, Bits[5:0] correspond to ports[5:0]
-+ // port 0 <-> port IMP
-+ u16_val = 0x103;
-+ bcm53115M_reg_write(0x31, 0x0, (u8 *)&u16_val, 2); // port 0
-+ u16_val = 0x103;
-+ bcm53115M_reg_write(0x31, 0x10, (u8 *)&u16_val, 2); // IMP
-+
-+
-+ // port 4 <-> port 5
-+ u16_val = 0x3c;
-+ bcm53115M_reg_write(0x31, 0x08, (u8 *)&u16_val, 2); // port 4
-+ u16_val = 0x3c;
-+ bcm53115M_reg_write(0x31, 0x0A, (u8 *)&u16_val, 2); // port 5
-+
-+
-+ // others <-> none
-+ u16_val = 0x00;
-+ bcm53115M_reg_write(0x31, 0x02, (u8 *)&u16_val, 2); // port 1
-+ bcm53115M_reg_write(0x31, 0x04, (u8 *)&u16_val, 2); // port 2
-+ bcm53115M_reg_write(0x31, 0x06, (u8 *)&u16_val, 2); // port 3
-+
-+ // port 1 <-> port IMP
-+ u16_val = 0x103;
-+ bcm53115M_reg_write(0x31, 0x2, (u8 *)&u16_val, 2); // port 1
-+
-+ // port 2 <-> port 5
-+ u16_val = 0x3c;
-+ bcm53115M_reg_write(0x31, 0x4, (u8 *)&u16_val, 2); // port 2
-+
-+ // port 3 <-> port 5
-+ u16_val = 0x3c;
-+ bcm53115M_reg_write(0x31, 0x6, (u8 *)&u16_val, 2); // port 3
-+
-+ /* Create VLAN1 for default port pvid */
-+#if 0
-+ v_ent.vid = 1;
-+ v_ent.forward_map = 0x13F; // all ports
-+ robo_write_vlan(&v_ent);
-+#endif
-+
-+ /* Unmanagement mode */
-+ // Switch Mode. Page 00h,Address 0Bh
-+ bval = 0x02; // forward enable, unmanaged mode
-+ bcm53115M_reg_write(0x0, 0xb, &bval, 1);
-+
-+ /* Init port5 & IMP (test giga mode first) */
-+ // IMP port control. Page 00h,Address 08h
-+ bval = 0x1C; // RX UCST/MCST/BCST enable
-+ bcm53115M_reg_write(0x0, 0x8, &bval, 1);
-+
-+ offset=0x5d; // port 5
-+ bval=0x7b;
-+ bcm53115M_reg_write(page, offset, (u8 *)&bval, 1);
-+ bcm53115M_reg_read(page, offset, (u8 *)&bval, 1);
-+
-+ // Speed, dulplex......etc
-+ // setting in Gsw_Configure_Gsw_Hardware()
-+
-+ // Mgmt configuration, Page 02h, Address 00h
-+ bval = 0;
-+ bcm53115M_reg_write(0x02, 0x00, &bval, 1);
-+ // BRCM header, Page 02h, Address 03h
-+ bval = 0; // without additional header information
-+ bcm53115M_reg_write(0x02, 0x03, &bval, 1);
-+
-+ /* Init front ports, port0-4 */
-+ // MAC
-+ pc.speed = BCM_PORT_1G;
-+ pc.link = 0; // link detect by robo_port_update()
-+ pc.ow = 0;
-+ for (i=BCM_PORT_0; i<=BCM_PORT_4; i++)
-+ bcm53115M_mac_port_config(i, &pc);
-+ // Internal Phy
-+ bcm53115M_init_internal_phy();
-+
-+ /* Enable all port, STP_STATE=No spanning tree, TX/RX enable */
-+ // Page 00h, Address 00h-05h
-+ bval = 0x0;
-+ for (i=0; i<=5; i++)
-+ bcm53115M_reg_write(0x0, i, &bval, 1);
-+
-+ // Disable broadcast storm control due to h/w strap pin BC_SUPP_EN
-+ // Page 41h, Address 10h-13h, bit28&22
-+
-+ // for port 0 ~ 5
-+ for (i=0 ; i <= 0x14; i+=4) {
-+ bcm53115M_reg_read(0x41, 0x10+i, (u8 *)&u32_val, 4);
-+ u32_val &= ~((1<<28) | (1<<22));
-+ bcm53115M_reg_write(0x41, 0x10+i, (u8 *)&u32_val, 4);
-+ }
-+
-+ // for IMP port
-+ bcm53115M_reg_read(0x41, 0x30, (u8 *)&u32_val, 4);
-+ u32_val &= ~((1<<28) | (1<<22));
-+ bcm53115M_reg_write(0x41, 0x30, (u8 *)&u32_val, 4);
-+
-+ /* Misc */
-+ // led
-+ bcm53115M_led_init();
-+ // multicast fwd rule, Page 00h, Address 2Fh
-+ bval = 0;
-+ bcm53115M_reg_write(0x00, 0x2F, &bval, 1);
-+
-+#ifdef BCM53115M_DISABLE_LEARNING
-+ // disable learning
-+ page=0x00;
-+ offset=0x3c;
-+ u16_val=0x13f;
-+ bcm53115M_reg_write(page, offset, (u8 *)&u16_val, 2);
-+ bcm53115M_reg_read(page, offset, (u8 *)&u16_val, 2);
-+
-+ page=0x02;
-+ offset=0x06;
-+ u32_val=4;
-+ bcm53115M_reg_write(page, offset, (u8 *)&u32_val, 4);
-+#endif
-+#endif
-+ return CAVM_OK;
-+}
-+#endif // defined(LINUX_KERNEL)
-+
-+//#define MAC2_RGMII
-+#define CNS3XXX_MAC2_IP1001_GIGA_MODE
-+
-+void icp_ip1001_init_mac(u8 mac_port, u16 phy_addr)
-+{
-+ u32 mac_port_config = 0;
-+ u8 mac_addr[]={0x0c, 0x10, 0x18};
-+
-+ cns3xxx_enable_mac_clock(mac_port, 1);
-+
-+ mac_port_config = SWITCH_REG_VALUE(mac_addr[mac_port]);
-+
-+ //cns3xxx_txc_dly(mac_port, 2);
-+ //cns3xxx_rxc_dly(mac_port, 2);
-+ //SLK_SKEW_CTRL_REG
-+#if 1
-+
-+ // enable GMII, MII, reverse MII
-+ mac_port_config &= (~(1 << 15));
-+
-+#ifdef MAC2_RGMII
-+ mac_port_config |= (1 << 15);
-+#endif
-+
-+ // TXC check disable
-+ //mac_port_config &= (~(1 << 13));
-+
-+ // disable GIGA mode
-+ mac_port_config &= (~(1<<16));
-+
-+#ifdef CNS3XXX_MAC2_IP1001_GIGA_MODE
-+ // enable GIGA mode
-+ mac_port_config |= (1<<16);
-+
-+ //mac_port_config |= (1<<19);
-+#endif
-+
-+ // disable PHY's AN
-+ mac_port_config &= (~(0x1 << 7));
-+
-+ // enable PHY's AN
-+ mac_port_config |= (0x1 << 7);
-+#else
-+ // disable PHY's AN
-+ mac_port_config &= (~(0x1 << 7));
-+ // disable GIGA mode
-+ mac_port_config &= (~(1<<16));
-+
-+ // force 100Mbps
-+ mac_port_config &= (~(0x3 << 8));
-+ mac_port_config |= (0x1 << 8);
-+
-+ // force duplex
-+ mac_port_config |= (0x1 << 10);
-+
-+ // TX flow control off
-+ mac_port_config &= (~(0x1 << 12));
-+
-+ // RX flow control off
-+ mac_port_config &= (~(0x1 << 11));
-+
-+#if 0
-+ // TX flow control on
-+ mac_port_config |= (0x1 << 12);
-+
-+ // RX flow control on
-+ mac_port_config |= (0x1 << 11);
-+#endif
-+
-+ // enable GMII, MII, reverse MII
-+ mac_port_config &= (~(1 << 15));
-+#endif
-+ SWITCH_REG_VALUE(mac_addr[mac_port]) = mac_port_config;
-+
-+ // If mac port AN turns on, auto polling needs to turn on.
-+ cns3xxx_phy_auto_polling_conf(mac_port, phy_addr);
-+
-+}
-+
-+int icp_ip1001_init(u8 mac_port, u8 phy_addr)
-+{
-+ u16 phy_data = 0;
-+
-+ printk("mac_port: %d ## phy_addr: %d\n", mac_port, phy_addr);
-+ cns3xxx_mdc_mdio_disable(0);
-+
-+#if 0
-+ // GMII2 high speed drive strength
-+ IOCDA_REG &= ((~3 << 10));
-+ IOCDA_REG |= (1 << 10);
-+#endif
-+ IOCDA_REG = 0x55555800;
-+
-+ phy_data = get_phy_id(phy_addr); // should be 0x243
-+
-+ printk("ICPLUS IP 1001 phy id : %x\n", phy_data);
-+
-+ if (phy_data != 0x0243) {
-+ printk("wrong phy id!!\n");
-+ return CAVM_ERR;
-+ }
-+
-+
-+ cns3xxx_phy_reset(phy_addr);
-+
-+ icp_ip1001_init_mac(mac_port, phy_addr);
-+
-+ // read advertisement register
-+ cns3xxx_read_phy(phy_addr, 0x4, &phy_data);
-+
-+ // enable PAUSE frame capability
-+ phy_data |= (0x1 << 10);
-+
-+ phy_data &= (~(0x1 << 5));
-+ phy_data &= (~(0x1 << 6));
-+ phy_data &= (~(0x1 << 7));
-+ phy_data &= (~(0x1 << 8));
-+
-+#if 1
-+ phy_data |= (0x1 << 5);
-+ phy_data |= (0x1 << 6);
-+ phy_data |= (0x1 << 7);
-+ phy_data |= (0x1 << 8);
-+#endif
-+
-+ cns3xxx_write_phy(phy_addr, 0x4, phy_data);
-+
-+ cns3xxx_read_phy(phy_addr, 9, &phy_data);
-+
-+ phy_data &= (~(1<<8)); // remove advertise 1000 half duples
-+ phy_data &= (~(1<<9)); // remove advertise 1000 full duples
-+#ifdef CNS3XXX_MAC2_IP1001_GIGA_MODE
-+ //phy_data |= (1<<8); // add advertise 1000 half duples
-+ phy_data |= (1<<9); // add advertise 1000 full duples
-+#endif
-+ cns3xxx_write_phy(phy_addr, 9, phy_data);
-+
-+ cns3xxx_read_phy(phy_addr, 9, &phy_data);
-+
-+ cns3xxx_read_phy(phy_addr, 0, &phy_data);
-+ // AN enable
-+ phy_data |= (0x1 << 12);
-+ cns3xxx_write_phy(phy_addr, 0, phy_data);
-+
-+ cns3xxx_read_phy(phy_addr, 0, &phy_data);
-+ // restart AN
-+ phy_data |= (0x1 << 9);
-+ cns3xxx_write_phy(phy_addr, 0, phy_data);
-+ return 0;
-+}
-+
-+#define PHY_CONTROL_REG_ADDR 0x00
-+#define PHY_AN_ADVERTISEMENT_REG_ADDR 0x04
-+
-+int icp_101a_init_mac(u8 port, u8 phy_addr)
-+{
-+ u32 mac_port_config = 0;
-+
-+ cns3xxx_enable_mac_clock(port, 1);
-+
-+ switch (port)
-+ {
-+ case 0:
-+ {
-+ mac_port_config = MAC0_CFG_REG;
-+ break;
-+ }
-+ case 1:
-+ {
-+ mac_port_config = MAC1_CFG_REG;
-+ break;
-+ }
-+ case 2:
-+ {
-+ mac_port_config = MAC2_CFG_REG;
-+ break;
-+ }
-+ }
-+
-+ // enable GMII, MII, reverse MII
-+ mac_port_config &= (~(1 << 15));
-+
-+ // disable PHY's AN, use force mode
-+ mac_port_config &= (~(0x1 << 7));
-+#ifdef CONFIG_FPGA_FORCE
-+
-+ // force 100Mbps
-+ mac_port_config &= (~(0x3 << 8));
-+ mac_port_config |= (0x1 << 8);
-+
-+ // force duplex
-+ mac_port_config |= (0x1 << 10);
-+
-+ // TX flow control on
-+ mac_port_config |= (0x1 << 12);
-+
-+ // RX flow control on
-+ mac_port_config |= (0x1 << 11);
-+
-+ // Turn off GSW_PORT_TX_CHECK_EN_BIT
-+ mac_port_config &= (~(0x1 << 13));
-+#else
-+ // enable PHY's AN
-+ mac_port_config |= (0x1 << 7);
-+ // If mac port AN turns on, auto polling needs to turn on.
-+ cns3xxx_phy_auto_polling_conf(port, phy_addr);
-+#endif
-+ // normal MII
-+ mac_port_config &= (~(1 << 14));
-+
-+
-+ switch (port)
-+ {
-+ case 0:
-+ {
-+ MAC0_CFG_REG = mac_port_config;
-+ break;
-+ }
-+ case 1:
-+ {
-+ MAC1_CFG_REG = mac_port_config;
-+ break;
-+ }
-+ case 2:
-+ {
-+ MAC2_CFG_REG = mac_port_config;
-+ break;
-+ }
-+ }
-+
-+
-+ return CAVM_OK;
-+}
-+
-+int icp_101a_init(u8 mac_port, u8 phy_addr)
-+{
-+ u32 mac_port_config=0;
-+ u16 phy_data = 0;
-+
-+ cns3xxx_mdc_mdio_disable(0);
-+ cns3xxx_phy_reset(phy_addr);
-+
-+ phy_data = get_phy_id(mac_port);
-+ if (phy_data != 0x0243) {
-+ printk("ICPLUS 101A phy id should be 0x243, but the phy id is : %x\n", phy_data);
-+ return CAVM_ERR;
-+ }
-+ printk("phy id : %x\n", phy_data);
-+ printk("init IC+101A\n");
-+
-+ icp_101a_init_mac(mac_port, phy_addr);
-+
-+ // read advertisement register
-+ cns3xxx_read_phy(phy_addr, 0x4, &phy_data);
-+
-+ // enable PAUSE frame capability
-+ phy_data |= (0x1 << 10);
-+
-+ cns3xxx_write_phy(phy_addr, 0x4, phy_data);
-+
-+#ifndef CONFIG_FPGA_FORCE
-+
-+ switch (mac_port)
-+ {
-+ case 0:
-+ {
-+ mac_port_config = MAC0_CFG_REG;
-+ break;
-+ }
-+ case 1:
-+ {
-+ mac_port_config = MAC1_CFG_REG;
-+ break;
-+ }
-+ case 2:
-+ {
-+ mac_port_config = MAC2_CFG_REG;
-+ break;
-+ }
-+ }
-+
-+#if 0
-+ if (!(mac_port_config & (0x1 << 5))) {
-+ if (cns3xxx_read_phy (port, PHY_AN_ADVERTISEMENT_REG_ADDR, &phy_data) == CAVM_ERR)
-+ {
-+ //PDEBUG("\n PORT%d, enable local flow control capability Fail\n", port);
-+ return CAVM_ERR;
-+ }
-+ else
-+ {
-+ // enable PAUSE frame capability
-+ phy_data |= (0x1 << 10);
-+
-+ if (cns3xxx_write_phy (port, PHY_AN_ADVERTISEMENT_REG_ADDR, phy_data) == CAVM_ERR)
-+ {
-+ //PDEBUG("\nPORT%d, enable PAUSE frame capability Fail\n", port);
-+ return CAVM_ERR;
-+ }
-+ }
-+ }
-+#endif
-+
-+ cns3xxx_read_phy(phy_addr, 0, &phy_data);
-+ // an enable
-+ phy_data |= (0x1 << 12);
-+
-+ // restart AN
-+ phy_data |= (0x1 << 9);
-+ cns3xxx_write_phy(phy_addr, 0, phy_data);
-+
-+ while (1)
-+ {
-+ //PDEBUG ("\n Polling PHY%d AN \n", port);
-+ cns3xxx_read_phy (phy_data, 0, &phy_data);
-+
-+ if (phy_data & (0x1 << 9)) {
-+ continue;
-+ } else {
-+ //PDEBUG ("\n PHY%d AN restart is complete \n", port);
-+ break;
-+ }
-+ }
-+
-+#endif
-+
-+ return CAVM_OK;
-+}
-+
-+int cns3xxx_config_VSC8601_mac(u8 port)
-+{
-+ u32 mac_port_config = 0;
-+
-+ switch (port)
-+ {
-+ case 0:
-+ {
-+ mac_port_config = MAC0_CFG_REG;
-+ break;
-+ }
-+ case 1:
-+ {
-+ mac_port_config = MAC1_CFG_REG;
-+ break;
-+ }
-+ case 2:
-+ {
-+ mac_port_config = MAC2_CFG_REG;
-+ break;
-+ }
-+ }
-+
-+ switch (port)
-+ {
-+ case 0:
-+ {
-+ MAC0_CFG_REG = mac_port_config;
-+ break;
-+ }
-+ case 1:
-+ {
-+ MAC1_CFG_REG = mac_port_config;
-+ break;
-+ }
-+ case 2:
-+ {
-+ MAC2_CFG_REG = mac_port_config;
-+ break;
-+ }
-+ }
-+ return CAVM_OK;
-+}
-+
-+u16 get_phy_id(u8 phy_addr)
-+{
-+ u16 read_data;
-+
-+ cns3xxx_read_phy(phy_addr, 2, &read_data);
-+
-+ return read_data;
-+}
-+
-+u32 get_vsc8601_recv_err_counter(u8 phy_addr)
-+{
-+ u16 read_data=0;
-+ cns3xxx_read_phy(phy_addr, 19, &read_data);
-+ return read_data;
-+}
-+
-+u32 get_crc_good_counter(u8 phy_addr)
-+{
-+ u16 read_data=0;
-+
-+ // enter extended register mode
-+ cns3xxx_write_phy(phy_addr, 31, 0x0001);
-+
-+ cns3xxx_read_phy(phy_addr, 18, &read_data);
-+
-+ // back to normal register mode
-+ cns3xxx_write_phy(phy_addr, 31, 0x0000);
-+
-+ return read_data;
-+}
-+
-+int cns3xxx_config_VSC8601(u8 mac_port, u8 phy_addr)
-+{
-+ u16 phy_data=0;
-+ u32 mac_port_config=0;
-+ //u8 tx_skew=1, rx_skew=1;
-+ u16 phy_id=0;
-+
-+ cns3xxx_mdc_mdio_disable(0);
-+
-+ cns3xxx_read_phy(phy_addr, 0, &phy_data);
-+ // software reset
-+ phy_data |= (0x1 << 15);
-+ cns3xxx_write_phy(phy_addr, 0, phy_data);
-+ udelay(10);
-+
-+ phy_id = get_phy_id(phy_addr);
-+ if (phy_id != 0x143) {
-+ return CAVM_ERR;
-+ }
-+
-+ switch (mac_port)
-+ {
-+ case 0:
-+ {
-+ mac_port_config = MAC0_CFG_REG;
-+ break;
-+ }
-+ case 1:
-+ {
-+ mac_port_config = MAC1_CFG_REG;
-+ break;
-+ }
-+ case 2:
-+ {
-+ mac_port_config = MAC2_CFG_REG;
-+ break;
-+ }
-+ }
-+
-+ cns3xxx_enable_mac_clock(mac_port, 1);
-+ //phy_auto_polling(mac_port, phy_addr);
-+
-+ // enable RGMII-PHY mode
-+ mac_port_config |= (0x1 << 15);
-+
-+ // If mac AN turns on, auto polling needs to turn on.
-+ // enable PHY's AN
-+ mac_port_config |= (0x1 << 7);
-+ cns3xxx_phy_auto_polling_conf(mac_port, phy_addr);
-+
-+ // enable GSW MAC port 0
-+ mac_port_config &= ~(0x1 << 18);
-+
-+ // normal MII
-+ mac_port_config &= (~(1 << 14));
-+
-+ switch (mac_port)
-+ {
-+ case 0:
-+ {
-+ MAC0_CFG_REG = mac_port_config;
-+ printk("8601 MAC0_CFG_REG: %x\n", MAC0_CFG_REG);
-+ break;
-+ }
-+ case 1:
-+ {
-+ MAC1_CFG_REG = mac_port_config;
-+ printk("8601 MAC1_CFG_REG: %x\n", MAC1_CFG_REG);
-+ break;
-+ }
-+ case 2:
-+ {
-+ MAC2_CFG_REG = mac_port_config;
-+ break;
-+ }
-+ }
-+
-+ cns3xxx_write_phy(phy_addr, 0x18, 0xf1e7);
-+ cns3xxx_write_phy(phy_addr, 0x1c, 0x8e00);
-+ cns3xxx_write_phy(phy_addr, 0x10, 0x20);
-+ cns3xxx_write_phy(phy_addr, 0x1c, 0xa41f);
-+ cns3xxx_write_phy(phy_addr, 0x1c, 0xb41a);
-+ cns3xxx_write_phy(phy_addr, 0x1c, 0xb863);
-+ cns3xxx_write_phy(phy_addr, 0x17, 0xf04);
-+ cns3xxx_write_phy(phy_addr, 0x15, 0x1);
-+ cns3xxx_write_phy(phy_addr, 0x17, 0x0);
-+
-+ return CAVM_OK;
-+}
-+
-+
-+
-+#ifdef CONFIG_LIBRA
-+void icp_175c_all_phy_power_down(int y)
-+{
-+ int i=0;
-+
-+ for (i=0 ; i < 5 ; ++i)
-+ std_phy_power_down(i, y);
-+
-+}
-+
-+static int star_gsw_config_icplus_175c_phy4(void)
-+{
-+ u16 phy_data = 0, phy_data2 = 0;
-+ u32 volatile ii, jj;
-+ u8 phy_speed_dup = 0, phy_flowctrl = 0;
-+ u32 volatile reg;
-+ u8 gsw_mac_0_phy_addr = 0;
-+ u8 gsw_mac_1_phy_addr = 1;
-+
-+
-+ printk("config IC+175C\n");
-+ /*
-+ * Configure MAC port 0
-+ * For IP175C Switch setting
-+ * Force 100Mbps, and full-duplex, and flow control on
-+ */
-+ reg = GSW_MAC_PORT_0_CONFIG_REG;
-+
-+ // disable PHY's AN
-+ reg &= ~(0x1 << 7);
-+
-+ // disable RGMII-PHY mode
-+ reg &= ~(0x1 << 15);
-+
-+ // force speed = 100Mbps
-+ reg &= ~(0x3 << 8);
-+ reg |= (0x1 << 8);
-+
-+ // force full-duplex
-+ reg |= (0x1 << 10);
-+
-+ // force Tx/Rx flow-control on
-+ reg |= (0x1 << 11) | (0x1 << 12);
-+
-+ GSW_MAC_PORT_0_CONFIG_REG = reg;
-+
-+
-+ for (ii = 0; ii < 0x2000; ii++)
-+ {
-+ reg = GSW_MAC_PORT_0_CONFIG_REG;
-+
-+ if ((reg & 0x1) && !(reg & 0x2))
-+ {
-+ /*
-+ * enable MAC port 0
-+ */
-+ reg &= ~(0x1 << 18);
-+
-+
-+ /*
-+ * enable the forwarding of unknown, multicast and broadcast packets to CPU
-+ */
-+ reg &= ~((0x1 << 25) | (0x1 << 26) | (0x1 << 27));
-+
-+ /*
-+ * include unknown, multicast and broadcast packets into broadcast storm
-+ */
-+ reg |= ((0x1 << 29) | (0x1 << 30) | ((u32)0x1 << 31));
-+
-+ GSW_MAC_PORT_0_CONFIG_REG = reg;
-+
-+ break;
-+ }
-+ else
-+ {
-+ for (jj = 0; jj < 0x1000; jj++);
-+
-+
-+ if ((ii % 4) == 0)
-+ printk("\rCheck MAC/PHY 0 Link Status : |");
-+ else if ((ii % 4) == 1)
-+ printk("\rCheck MAC/PHY 0 Link Status : /");
-+ else if ((ii % 4) == 2)
-+ printk("\rCheck MAC/PHY 0 Link Status : -");
-+ else if ((ii % 4) == 3)
-+ printk("\rCheck MAC/PHY 0 Link Status : \\");
-+ }
-+ }
-+
-+
-+ if (!(reg & 0x1) || (reg & 0x2))
-+ {
-+ /*
-+ * Port 0 PHY link down or no TXC in Port 0
-+ */
-+ printk("\rCheck MAC/PHY 0 Link Status : DOWN!\n");
-+
-+ return -1;
-+ }
-+ else
-+ {
-+ printk("\rCheck MAC/PHY 0 Link Status : UP!\n");
-+ }
-+
-+
-+
-+ /*
-+ * Configure MAC port 1
-+ */
-+ reg = GSW_MAC_PORT_0_CONFIG_REG;
-+
-+ // disable MAC's AN
-+ reg &= ~(0x1 << 7);
-+
-+ GSW_MAC_PORT_0_CONFIG_REG = reg;
-+
-+
-+ /* enable flow control on (PAUSE frame) */
-+ star_gsw_read_phy(gsw_mac_1_phy_addr, 0x4, &phy_data);
-+
-+ phy_data |= (0x1 << 10);
-+
-+ star_gsw_write_phy(gsw_mac_1_phy_addr, 0x4, phy_data);
-+
-+#if 1
-+ /* 2007/12/18 Jerry
-+ The software reset of IC+ 175C won't reset MII register 29, 30, 31.
-+ Router Control Register: bit 7 (TAG_VLAN_EN) is a VLAN related filed which affect vlan setting.
-+ Router Control Register: bit 3 (ROUTER_EN) enable router function at MII port.
-+ We set them to default to let U-boot properly work.
-+ */
-+ phy_data = 0x1001;
-+ star_gsw_write_phy(30, 9, phy_data);
-+#endif
-+ /* restart PHY auto neg. */
-+ star_gsw_read_phy(gsw_mac_1_phy_addr, 0x0, &phy_data);
-+
-+ phy_data |= (0x1 << 9) | (0x1 << 12);
-+
-+ star_gsw_write_phy(gsw_mac_1_phy_addr, 0x0, phy_data);
-+
-+
-+
-+ /* wait for PHY auto neg. complete */
-+ for (ii = 0; ii < 0x20; ii++)
-+ {
-+ star_gsw_read_phy(gsw_mac_1_phy_addr, 0x1, &phy_data);
-+
-+ if ((phy_data & (0x1 << 2)) && (phy_data & (0x1 << 5)))
-+ {
-+ break;
-+ }
-+ else
-+ {
-+ if ((ii % 4) == 0)
-+ printk("\rCheck MAC/PHY 1 Link Status : |");
-+ else if ((ii % 4) == 1)
-+ printk("\rCheck MAC/PHY 1 Link Status : /");
-+ else if ((ii % 4) == 2)
-+ printk("\rCheck MAC/PHY 1 Link Status : -");
-+ else if ((ii % 4) == 3)
-+ printk("\rCheck MAC/PHY 1 Link Status : \\");
-+ }
-+ }
-+
-+
-+ if (ii >= 0x20)
-+ {
-+ printk("\rCheck MAC/PHY 1 Link Status : DOWN!\n");
-+
-+ return -1;
-+ }
-+ else
-+ {
-+ printk("\rCheck MAC/PHY 1 Link Status : UP!\n");
-+ }
-+
-+
-+ star_gsw_read_phy(gsw_mac_1_phy_addr, 0x4, &phy_data);
-+
-+ star_gsw_read_phy(gsw_mac_1_phy_addr, 0x5, &phy_data2);
-+
-+
-+ if (phy_data & 0x0400) //FC on
-+ {
-+ //printk("<FC ON>");
-+ phy_flowctrl = 1;
-+ }
-+ else
-+ {
-+ // printk("<FC OFF>");
-+ phy_flowctrl = 0;
-+ }
-+
-+
-+ phy_speed_dup = 0;
-+
-+ if ((phy_data & 0x0100) && (phy_data2 & 0x0100)) //100F
-+ {
-+ // printk("<100F>");
-+ phy_speed_dup |= (0x1 << 3); //set bit3 for 100F
-+ }
-+ else if ((phy_data & 0x0080) && (phy_data2 & 0x0080)) //100F
-+ {
-+ // printk("<100H>");
-+ phy_speed_dup |= (0x1 << 2);
-+ }
-+ else if ((phy_data & 0x0040) && (phy_data2 & 0x0040)) //100F
-+ {
-+ // printk("<10F>");
-+ phy_speed_dup |= (0x1 << 1);
-+ }
-+ else if ((phy_data & 0x0020) && (phy_data2 & 0x0020)) //100F
-+ {
-+ // printk("<10H>");
-+ phy_speed_dup |= 0x1;
-+ }
-+
-+
-+ /*
-+ * Configure MAC port 1 in forced setting subject to the current PHY status
-+ */
-+ reg = GSW_MAC_PORT_1_CONFIG_REG;
-+
-+ reg &= ~(0x1 << 7); //AN off
-+
-+ reg &= ~(0x3 << 8);
-+
-+ if (phy_speed_dup & 0x0C) //100
-+ {
-+ //printk("<set 100>");
-+ reg |= (0x01 << 8);
-+ }
-+ else if (phy_speed_dup & 0x03) //10
-+ {
-+ //printk("<set 10>");
-+ reg |= (0x00 << 8);
-+ }
-+
-+ reg &= ~(0x1 << 11);
-+
-+ if (phy_flowctrl) //FC on
-+ {
-+ //printk("<set FC on>");
-+ reg |= (0x1 << 11);
-+ }
-+ else
-+ {
-+ //printk("<set FC off>");
-+ reg |= (0x0 << 11);
-+ }
-+
-+ reg &= ~(0x1 << 10);
-+
-+ if ((phy_speed_dup & 0x2) || (phy_speed_dup & 0x8)) //FullDup
-+ {
-+ //printk("<set full>");
-+ reg |= (0x1 << 10);
-+ }
-+ else //HalfDup
-+ {
-+ //printk("<set half>");
-+ reg |= (0x0 << 10); //Half
-+ }
-+
-+ GSW_MAC_PORT_1_CONFIG_REG = reg;
-+
-+
-+ /*
-+ * Check MAC port 1 link status
-+ */
-+ for (ii = 0; ii < 0x1000; ii++)
-+ {
-+ reg = GSW_MAC_PORT_1_CONFIG_REG;
-+
-+ if ((reg & 0x1) && !(reg & 0x2))
-+ {
-+ /*
-+ * enable MAC port 1
-+ */
-+ reg &= ~(0x1 << 18);
-+
-+ /*
-+ * enable the forwarding of unknown, multicast and broadcast packets to CPU
-+ */
-+ reg &= ~((0x1 << 25) | (0x1 << 26) | (0x1 << 27));
-+
-+ /*
-+ * include unknown, multicast and broadcast packets into broadcast storm
-+ */
-+ reg |= ((0x1 << 29) | (0x1 << 30) | ((u32)0x1 << 31));
-+
-+ GSW_MAC_PORT_1_CONFIG_REG = reg;
-+
-+ return 0;
-+ }
-+ }
-+
-+
-+ if (ii > 0x1000)
-+ {
-+ /*
-+ * Port 1 PHY link down or no TXC in Port 1
-+ */
-+ printk("\rCheck MAC/PHY 1 Link Status : DOWN!\n");
-+
-+ return -1;
-+ }
-+ return 0;
-+}
-+#endif
-+
-+#if 0
-+static int star_gsw_config_VSC8201(u8 mac_port, u8 phy_addr) // include cicada 8201
-+{
-+ //u32 mac_port_base = 0;
-+ u32 mac_port_config=0;
-+ u16 phy_reg;
-+ int i;
-+
-+ printk("\nconfigure VSC8201\n");
-+ //PDEBUG("mac port : %d phy addr : %d\n", mac_port, phy_addr);
-+ /*
-+ * Configure MAC port 0
-+ * For Cicada CIS8201 single PHY
-+ */
-+ if (mac_port == 0) {
-+ //PDEBUG("port 0\n");
-+ mac_port_config = GSW_MAC_PORT_0_CONFIG_REG;
-+ }
-+ if (mac_port == 1) {
-+ //PDEBUG("port 1\n");
-+ mac_port_config = GSW_MAC_PORT_1_CONFIG_REG;
-+ }
-+
-+ star_gsw_set_phy_addr(mac_port, phy_addr);
-+ //star_gsw_set_phy_addr(1, 1);
-+
-+ //mac_port_config = __REG(mac_port_base);
-+
-+ // enable PHY's AN
-+ mac_port_config |= (0x1 << 7);
-+
-+ // enable RGMII-PHY mode
-+ mac_port_config |= (0x1 << 15);
-+
-+ // enable GSW MAC port 0
-+ mac_port_config &= ~(0x1 << 18);
-+
-+ if (mac_port == 0) {
-+ //PDEBUG("port 0\n");
-+ GSW_MAC_PORT_0_CONFIG_REG = mac_port_config;
-+ }
-+ if (mac_port == 1) {
-+ //PDEBUG("port 1\n");
-+ GSW_MAC_PORT_1_CONFIG_REG = mac_port_config;
-+ }
-+
-+ /*
-+ * Configure Cicada's CIS8201 single PHY
-+ */
-+#ifdef CONFIG_STAR9100_SHNAT_PCI_FASTPATH
-+ /* near-end loopback mode */
-+ star_gsw_read_phy(phy_addr, 0x0, &phy_reg);
-+ phy_reg |= (0x1 << 14);
-+ star_gsw_write_phy(phy_addr, 0x0, phy_reg);
-+#endif
-+
-+ star_gsw_read_phy(phy_addr, 0x1C, &phy_reg);
-+
-+ // configure SMI registers have higher priority over MODE/FRC_DPLX, and ANEG_DIS pins
-+ phy_reg |= (0x1 << 2);
-+
-+ star_gsw_write_phy(phy_addr, 0x1C, phy_reg);
-+
-+ star_gsw_read_phy(phy_addr, 0x17, &phy_reg);
-+
-+ // enable RGMII MAC interface mode
-+ phy_reg &= ~(0xF << 12);
-+ phy_reg |= (0x1 << 12);
-+
-+ // enable RGMII I/O pins operating from 2.5V supply
-+ phy_reg &= ~(0x7 << 9);
-+ phy_reg |= (0x1 << 9);
-+
-+ star_gsw_write_phy(phy_addr, 0x17, phy_reg);
-+
-+ star_gsw_read_phy(phy_addr, 0x4, &phy_reg);
-+
-+ // Enable symmetric Pause capable
-+ phy_reg |= (0x1 << 10);
-+
-+ star_gsw_write_phy(phy_addr, 0x4, phy_reg);
-+
-+
-+
-+ if (mac_port == 0) {
-+ //PDEBUG("port 0\n");
-+ mac_port_config = GSW_MAC_PORT_0_CONFIG_REG;
-+ }
-+ if (mac_port == 1) {
-+ //PDEBUG("port 1\n");
-+ mac_port_config = GSW_MAC_PORT_1_CONFIG_REG;
-+ }
-+
-+
-+
-+
-+
-+
-+
-+ // enable PHY's AN
-+ mac_port_config |= (0x1 << 7);
-+
-+ if (mac_port == 0) {
-+ //PDEBUG("port 0\n");
-+ GSW_MAC_PORT_0_CONFIG_REG = mac_port_config;
-+ }
-+ if (mac_port == 1) {
-+ //PDEBUG("port 1\n");
-+ GSW_MAC_PORT_1_CONFIG_REG = mac_port_config;
-+ }
-+
-+ /*
-+ * Enable PHY1 AN restart bit to restart PHY1 AN
-+ */
-+ star_gsw_read_phy(phy_addr, 0x0, &phy_reg);
-+
-+ phy_reg |= (0x1 << 9) | (0x1 << 12);
-+
-+ star_gsw_write_phy(phy_addr, 0x0, phy_reg);
-+
-+ /*
-+ * Polling until PHY0 AN restart is complete
-+ */
-+ for (i = 0; i < 0x1000; i++) {
-+ star_gsw_read_phy(phy_addr, 0x1, &phy_reg);
-+
-+ if ((phy_reg & (0x1 << 5)) && (phy_reg & (0x1 << 2))) {
-+ printk("0x1 phy reg: %x\n", phy_reg);
-+ break;
-+ } else {
-+ udelay(100);
-+ }
-+ }
-+
-+ if (mac_port == 0) {
-+ //PDEBUG("port 0\n");
-+ mac_port_config = GSW_MAC_PORT_0_CONFIG_REG;
-+ }
-+ if (mac_port == 1) {
-+ //PDEBUG("port 1\n");
-+ mac_port_config = GSW_MAC_PORT_1_CONFIG_REG;
-+ }
-+
-+ if (((mac_port_config & 0x1) == 0) || (mac_port_config & 0x2)) {
-+ printk("Check MAC/PHY%s Link Status : DOWN!\n", (mac_port == 0 ? "0" : "1"));
-+ } else {
-+ printk("Check MAC/PHY%s Link Status : UP!\n", (mac_port == 0 ? "0" : "1"));
-+ /*
-+ * There is a bug for CIS8201 PHY operating at 10H mode, and we use the following
-+ * code segment to work-around
-+ */
-+ star_gsw_read_phy(phy_addr, 0x05, &phy_reg);
-+
-+ if ((phy_reg & (0x1 << 5)) && (!(phy_reg & (0x1 << 6))) && (!(phy_reg & (0x1 << 7))) && (!(phy_reg & (0x1 << 8)))) { /* 10H,10F/100F/100H off */
-+ star_gsw_read_phy(phy_addr, 0x0a, &phy_reg);
-+
-+ if ((!(phy_reg & (0x1 << 10))) && (!(phy_reg & (0x1 << 11)))) { /* 1000F/1000H off */
-+ star_gsw_read_phy(phy_addr, 0x16, &phy_reg);
-+
-+ phy_reg |= (0x1 << 13) | (0x1 << 15); // disable "Link integrity check(B13)" & "Echo mode(B15)"
-+
-+ star_gsw_write_phy(phy_addr, 0x16, phy_reg);
-+ }
-+ }
-+ }
-+
-+ if (mac_port == 0) {
-+ // adjust MAC port 0 RX/TX clock skew
-+ GSW_BIST_RESULT_TEST_0_REG &= ~((0x3 << 24) | (0x3 << 26));
-+ GSW_BIST_RESULT_TEST_0_REG |= ((0x2 << 24) | (0x2 << 26));
-+ }
-+
-+ if (mac_port == 1) {
-+ // adjust MAC port 1 RX/TX clock skew
-+ GSW_BIST_RESULT_TEST_0_REG &= ~((0x3 << 28) | (0x3 << 30));
-+ GSW_BIST_RESULT_TEST_0_REG |= ((0x2 << 28) | (0x2 << 30));
-+ }
-+
-+ return 0;
-+}
-+
-+
-+
-+
-+static void star_gsw_config_VSC8X01()
-+{
-+ u16 phy_id = 0;
-+
-+#ifdef CONFIG_DORADO2
-+ star_gsw_set_phy_addr(1,1);
-+ star_gsw_read_phy(1, 0x02, &phy_id);
-+ // printk("phy id = %X\n", phy_id);
-+ if (phy_id == 0x000F) //VSC8201
-+ star_gsw_config_VSC8201(1,1);
-+ else
-+ star_gsw_config_VSC8601(1,1);
-+#else
-+#ifdef CONFIG_LEO
-+ star_gsw_set_phy_addr(0,0);
-+ star_gsw_read_phy(0, 0x02, &phy_id);
-+ // printk("phy id = %X\n", phy_id);
-+ if (phy_id == 0x000F) //VSC8201
-+ star_gsw_config_VSC8201(0,0);
-+ else
-+ star_gsw_config_VSC8601(0,0);
-+#endif
-+#endif
-+}
-+#endif
-+
-+#if defined(CONFIG_DORADO) || defined(CONFIG_DORADO2)
-+static int star_gsw_config_port0_VSC7385(void)
-+{
-+ u32 mac_port_config=0;
-+ int i;
-+
-+ printk("config VSC7385\n");
-+
-+ mac_port_config = GSW_MAC_PORT_0_CONFIG_REG;
-+
-+ // disable PHY's AN
-+ mac_port_config &= ~(0x1 << 7);
-+
-+ // enable RGMII-PHY mode
-+ mac_port_config |= (0x1 << 15);
-+
-+ // force speed = 1000Mbps
-+ mac_port_config &= ~(0x3 << 8);
-+ mac_port_config |= (0x2 << 8);
-+
-+ // force full-duplex
-+ mac_port_config |= (0x1 << 10);
-+
-+ // force Tx/Rx flow-control on
-+ mac_port_config |= (0x1 << 11) | (0x1 << 12);
-+
-+ GSW_MAC_PORT_0_CONFIG_REG = mac_port_config;
-+
-+ udelay(1000);
-+
-+ for (i = 0; i < 50000; i++) {
-+ mac_port_config = GSW_MAC_PORT_0_CONFIG_REG;
-+ if ((mac_port_config & 0x1) && !(mac_port_config & 0x2)) {
-+ break;
-+ } else {
-+ udelay(100);
-+ }
-+ }
-+
-+ if (!(mac_port_config & 0x1) || (mac_port_config & 0x2)) {
-+ printk("MAC0 PHY Link Status : DOWN!\n");
-+ return -1;
-+ } else {
-+ printk("MAC0 PHY Link Status : UP!\n");
-+ }
-+
-+ // enable MAC port 0
-+ mac_port_config &= ~(0x1 << 18);
-+
-+ // disable SA learning
-+ mac_port_config |= (0x1 << 19);
-+
-+ // forward unknown, multicast and broadcast packets to CPU
-+ mac_port_config &= ~((0x1 << 25) | (0x1 << 26) | (0x1 << 27));
-+
-+ // storm rate control for unknown, multicast and broadcast packets
-+ mac_port_config |= (0x1 << 29) | (0x1 << 30) | ((u32)0x1 << 31);
-+
-+ GSW_MAC_PORT_0_CONFIG_REG = mac_port_config;
-+
-+ // disable MAC port 1
-+ mac_port_config = GSW_MAC_PORT_1_CONFIG_REG;
-+ mac_port_config |= (0x1 << 18);
-+ GSW_MAC_PORT_1_CONFIG_REG = mac_port_config;
-+
-+ // adjust MAC port 0 /RX/TX clock skew
-+ GSW_BIST_RESULT_TEST_0_REG &= ~((0x3 << 24) | (0x3 << 26));
-+ GSW_BIST_RESULT_TEST_0_REG |= ((0x2 << 24) | (0x2 << 26));
-+
-+ return 0;
-+}
-+#endif
---- /dev/null
-+++ b/drivers/net/cns3xxx/cns3xxx_phy.h
-@@ -0,0 +1,82 @@
-+/*******************************************************************************
-+ *
-+ *
-+ * Copyright (c) 2009 Cavium Networks
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the Free
-+ * Software Foundation; either version 2 of the License, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+1* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program; if not, write to the Free Software Foundation, Inc., 59
-+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this distribution in the
-+ * file called LICENSE.
-+ *
-+ ********************************************************************************/
-+
-+#ifndef CNS3XXX_PHY_H
-+#define CNS3XXX_PHY_H
-+
-+#define LINUX_KERNEL // if don't define LINUX_KERNEL, mean u-boot
-+
-+#if defined(LINUX_KERNEL)
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#else // u-boot
-+#define __init_or_module
-+#include "cns3xxx_symbol.h"
-+#endif
-+
-+void disable_AN(int port, int y);
-+
-+u16 get_phy_id(u8 phy_addr);
-+int cns3xxx_std_phy_power_down(int phy_addr, int y);
-+u32 get_vsc8601_recv_err_counter(u8 phy_addr);
-+u32 get_crc_good_counter(u8 phy_addr);
-+int cns3xxx_config_VSC8601(u8 mac_port, u8 phy_addr);
-+int vsc8601_power_down(int phy_addr, int y);
-+int icp_101a_init(u8 mac_port, u8 phy_addr);
-+int bcm53115M_init(u8 mac_port, u16 phy_addr);
-+int icp_ip1001_init(u8 mac_port, u8 phy_addr);
-+
-+int cns3xxx_phy_auto_polling_enable(u8 port, u8 en);
-+
-+int cns3xxx_read_phy(u8 phy_addr, u8 phy_reg, u16 *read_data);
-+int cns3xxx_write_phy(u8 phy_addr, u8 phy_reg, u16 write_data);
-+
-+// wrap cns3xxx_spi_tx_rx() for argument order
-+int cns3xxx_spi_tx_rx_n(u32 tx_data, u32 *rx_data, u32 tx_channel, u32 tx_eof_flag);
-+
-+// for bcm53115M
-+#define ROBO_SPIF_BIT 7
-+#define BCM53115_SPI_CHANNEL 1
-+#define ROBO_RACK_BIT 5
-+
-+#define VLAN_START_BIT 7
-+#define VLAN_WRITE_CMD 0
-+
-+//#define BCM_PORT_1G 2
-+typedef enum
-+{
-+ BCM_PORT_10M = 0,
-+ BCM_PORT_100M,
-+ BCM_PORT_1G,
-+}BCM_PORT_SPEED;
-+
-+#define BCM_PORT_0 0
-+#define BCM_PORT_1 1
-+#define BCM_PORT_2 2
-+#define BCM_PORT_3 3
-+#define BCM_PORT_4 4
-+#define BCM_PORT_5 5
-+#define BCM_PORT_IMP 6
-+
-+#endif // end #ifndef CNS3XXX_PHY_H
---- /dev/null
-+++ b/drivers/net/cns3xxx/cns3xxx_sppe_hook.c
-@@ -0,0 +1,39 @@
-+/******************************************************************************
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ *
-+ ******************************************************************************/
-+
-+#if defined(CONFIG_CNS3XXX_SPPE)
-+#include <linux/module.h>
-+#include <linux/cns3xxx/sppe.h>
-+
-+int sppe_hook_ready = 0;
-+int (*sppe_func_hook)(SPPE_PARAM *param) = NULL;
-+int sppe_pci_fp_ready = 0;
-+int (*sppe_pci_fp_hook)(SPPE_PARAM *param) = NULL;
-+
-+EXPORT_SYMBOL(sppe_hook_ready);
-+EXPORT_SYMBOL(sppe_func_hook);
-+EXPORT_SYMBOL(sppe_pci_fp_ready);
-+EXPORT_SYMBOL(sppe_pci_fp_hook);
-+
-+#endif //#if defined(CONFIG_CNS3XXX_SPPE)
-+
---- /dev/null
-+++ b/drivers/net/cns3xxx/cns3xxx_symbol.h
-@@ -0,0 +1,317 @@
-+/*******************************************************************************
-+ *
-+ * Copyright (c) 2009 Cavium Networks
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the Free
-+ * Software Foundation; either version 2 of the License, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program; if not, write to the Free Software Foundation, Inc., 59
-+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this distribution in the
-+ * file called LICENSE.
-+ *
-+ ********************************************************************************/
-+
-+// the symbol define memory map register.
-+
-+#ifndef CNS3XXX_SYMBOL_H
-+#define CNS3XXX_SYMBOL_H
-+
-+#define DRV_VERSION "Cavium CNS3XXX Switch Driver-0.0.1"
-+
-+
-+#define LINUX_KERNEL // if don't define LINUX_KERNEL, mean u-boot
-+
-+#if defined(LINUX_KERNEL)
-+// linux kernel
-+#include <mach/board.h>
-+
-+#define SWITCH_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_SWITCH_BASE_VIRT+offset)))
-+#define PMU_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_PM_BASE_VIRT+offset)))
-+#define MISC_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT+offset)))
-+
-+
-+#define NETDEV_SIZE 4097+3
-+
-+#define PORT0_NETDEV_INDEX NETDEV_SIZE-3
-+#define PORT1_NETDEV_INDEX NETDEV_SIZE-2
-+#define PORT2_NETDEV_INDEX NETDEV_SIZE-1
-+
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+#define FP_NETDEV_INDEX NETDEV_SIZE-4
-+#endif
-+
-+#define PORT0_NETDEV net_dev_array[PORT0_NETDEV_INDEX]
-+#define PORT1_NETDEV net_dev_array[PORT1_NETDEV_INDEX]
-+#define PORT2_NETDEV net_dev_array[PORT2_NETDEV_INDEX]
-+
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+#define FP_NETDEV net_dev_array[FP_NETDEV_INDEX]
-+#endif
-+
-+#else // u-boot
-+#include <malloc.h> // for u8, u32
-+
-+#include "cns3000.h"
-+#define CAVM_OK 0
-+#define CAVM_ERR 1
-+#define CAVM_NOT_FOUND 2
-+#define CAVM_FOUND 3
-+#define CAVM_FAIL -1 // use minus
-+
-+#define SWITCH_REG_VALUE(addr) (*((volatile unsigned int *)(CNS3000_VEGA_SWITCH_BASE+addr)))
-+#define PMU_REG_VALUE(addr) (*((volatile unsigned int *)(CNS3000_VEGA_PM_BASE+addr)))
-+#define MISC_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3000_VEGA_MISC_BASE+offset)))
-+
-+#endif
-+
-+// for VLAN and ARL table MB_PMAP
-+#define MAC_PORT0_PMAP 1
-+#define MAC_PORT1_PMAP (1 << 1)
-+#define MAC_PORT2_PMAP (1 << 4)
-+#define CPU_PORT_PMAP (1 << 2)
-+
-+
-+
-+// memory map register definition
-+
-+//#define PHY_CTRL_REG (*(u32 volatile*(0xff)))
-+#define PHY_CTRL_REG SWITCH_REG_VALUE(0x0)
-+#define PHY_AUTO_ADDR_REG SWITCH_REG_VALUE(0x04)
-+
-+#define MAC_GLOB_CFG_REG SWITCH_REG_VALUE(0x08)
-+#define MAC_GLOB_CFG_EXT_REG SWITCH_REG_VALUE(0xf4)
-+#define MAC0_CFG_REG SWITCH_REG_VALUE(0x0c)
-+#define MAC1_CFG_REG SWITCH_REG_VALUE(0x10)
-+#define MAC2_CFG_REG SWITCH_REG_VALUE(0x18)
-+#define CPU_CFG_REG SWITCH_REG_VALUE(0x14)
-+
-+#define MAC0_PRI_CTRL_REG SWITCH_REG_VALUE(0x1c)
-+#define MAC1_PRI_CTRL_REG SWITCH_REG_VALUE(0x20)
-+#define CPU_PRI_CTRL_REG SWITCH_REG_VALUE(0x24)
-+#define HNAT_PRI_CTRL_REG SWITCH_REG_VALUE(0x28)
-+#define MAC2_PRI_CTRL_REG SWITCH_REG_VALUE(0x2c)
-+
-+#define MAC0_PRI_CTRL_EXT_REG SWITCH_REG_VALUE(0x30)
-+
-+#define ETYPE1_ETYPE0_REG SWITCH_REG_VALUE(0x34)
-+#define ETYPE3_ETYPE2_REG SWITCH_REG_VALUE(0x38)
-+
-+#define UDP_RANGE0_REG SWITCH_REG_VALUE(0x3c)
-+#define UDP_RANGE1_REG SWITCH_REG_VALUE(0x40)
-+#define UDP_RANGE2_REG SWITCH_REG_VALUE(0x44)
-+#define UDP_RANGE3_REG SWITCH_REG_VALUE(0x48)
-+
-+
-+#define PRIO_ETYPE_UDP_REG SWITCH_REG_VALUE(0x4c)
-+
-+#define PRIO_IPDSCP_7_0_REG SWITCH_REG_VALUE(0x50)
-+#define PRIO_IPDSCP_15_8_REG SWITCH_REG_VALUE(0x54)
-+#define PRIO_IPDSCP_23_16_REG SWITCH_REG_VALUE(0x58)
-+#define PRIO_IPDSCP_31_24_REG SWITCH_REG_VALUE(0x5c)
-+#define PRIO_IPDSCP_39_32_REG SWITCH_REG_VALUE(0x60)
-+#define PRIO_IPDSCP_47_40_REG SWITCH_REG_VALUE(0x64)
-+#define PRIO_IPDSCP_55_48_REG SWITCH_REG_VALUE(0x68)
-+#define PRIO_IPDSCP_63_56_REG SWITCH_REG_VALUE(0x6c)
-+
-+#define TC_CTRL_REG SWITCH_REG_VALUE(0x70)
-+#define RATE_CTRL_REG SWITCH_REG_VALUE(0x74)
-+
-+#define FC_GLOB_THRS_REG SWITCH_REG_VALUE(0x78)
-+#define FC_PORT_THRS_REG SWITCH_REG_VALUE(0x7c)
-+#define MC_GLOB_THRS_REG SWITCH_REG_VALUE(0x80)
-+#define DC_GLOB_THRS_REG SWITCH_REG_VALUE(0x84)
-+
-+#define ARL_VLAN_CMD_REG SWITCH_REG_VALUE(0x88)
-+
-+#define ARL_CTRL0_REG SWITCH_REG_VALUE(0x8c)
-+#define ARL_CTRL1_REG SWITCH_REG_VALUE(0x90)
-+#define ARL_CTRL2_REG SWITCH_REG_VALUE(0x94)
-+
-+#define VLAN_CFG SWITCH_REG_VALUE(0x098)
-+
-+#define MAC1_MAC0_PVID_REG SWITCH_REG_VALUE(0x9c)
-+#define MAC2_CPU_PVID_REG SWITCH_REG_VALUE(0xa0)
-+
-+#define VLAN_CTRL0_REG SWITCH_REG_VALUE(0xa4)
-+#define VLAN_CTRL1_REG SWITCH_REG_VALUE(0xa8)
-+#define VLAN_CTRL2_REG SWITCH_REG_VALUE(0xac)
-+
-+#define SESSION_ID_1_0_REG SWITCH_REG_VALUE(0xb0)
-+#define SESSION_ID_3_2_REG SWITCH_REG_VALUE(0xb4)
-+#define SESSION_ID_5_4_REG SWITCH_REG_VALUE(0xb8)
-+#define SESSION_ID_7_6_REG SWITCH_REG_VALUE(0xbc)
-+#define SESSION_ID_9_8_REG SWITCH_REG_VALUE(0xc0)
-+#define SESSION_ID_11_10_REG SWITCH_REG_VALUE(0xc4)
-+#define SESSION_ID_13_12_REG SWITCH_REG_VALUE(0xc8)
-+#define SESSION_ID_15_14_REG SWITCH_REG_VALUE(0xcc)
-+
-+#define INTR_STAT_REG SWITCH_REG_VALUE(0xd0)
-+#define INTR_MASK_REG SWITCH_REG_VALUE(0xd4)
-+
-+#define SRAM_TEST_REG SWITCH_REG_VALUE(0xd8)
-+
-+#define MEM_QUEUE_REG SWITCH_REG_VALUE(0xdc)
-+
-+#define SARL_CTRL_REG SWITCH_REG_VALUE(0xe0)
-+#define SARL_OQ_GTH_REG SWITCH_REG_VALUE(0xe4)
-+#define SARL_OQ_YTH_REG SWITCH_REG_VALUE(0xe8)
-+#define SARL_OQ_RTH_REG SWITCH_REG_VALUE(0xec)
-+
-+#define SLK_SKEW_CTRL_REG SWITCH_REG_VALUE(0xf0)
-+
-+#define DMA_RING_CTRL_REG SWITCH_REG_VALUE(0x100)
-+
-+#define DMA_AUTO_POLL_CFG_REG SWITCH_REG_VALUE(0x104)
-+
-+#define DELAY_INTR_CFG_REG SWITCH_REG_VALUE(0x108)
-+
-+#define TS_DMA_CTRL0_REG SWITCH_REG_VALUE(0x110)
-+#define TS_DESC_PTR0_REG SWITCH_REG_VALUE(0x114)
-+#define TS_DESC_BASE_ADDR0_REG SWITCH_REG_VALUE(0x118)
-+
-+#define FS_DMA_CTRL0_REG SWITCH_REG_VALUE(0x120)
-+#define FS_DESC_PTR0_REG SWITCH_REG_VALUE(0x124)
-+#define FS_DESC_BASE_ADDR0_REG SWITCH_REG_VALUE(0x128)
-+
-+#define TS_DMA_CTRL1_REG SWITCH_REG_VALUE(0x130)
-+#define TS_DESC_PTR1_REG SWITCH_REG_VALUE(0x134)
-+#define TS_DESC_BASE_ADDR1_REG SWITCH_REG_VALUE(0x138)
-+
-+#define FS_DMA_CTRL1_REG SWITCH_REG_VALUE(0x140)
-+#define FS_DESC_PTR1_REG SWITCH_REG_VALUE(0x144)
-+#define FS_DESC_BASE_ADDR1_REG SWITCH_REG_VALUE(0x148)
-+
-+#define TS_DMA_STA_REG SWITCH_REG_VALUE(0x150)
-+#define FS_DMA_STA_REG SWITCH_REG_VALUE(0x154)
-+
-+#define TS_MRD_CMD_CNT_REG SWITCH_REG_VALUE(0x158)
-+#define TS_MWT_CMD_CNT_REG SWITCH_REG_VALUE(0x15c)
-+
-+#define FS_MRD_CMD_CNT_REG SWITCH_REG_VALUE(0x160)
-+#define FS_MWT_CMD_CNT_REG SWITCH_REG_VALUE(0x164)
-+
-+#define C_RXOKPKT_MAC0_REG SWITCH_REG_VALUE(0x300)
-+#define C_RXOKBYTE_MAC0_REG SWITCH_REG_VALUE(0x304)
-+#define C_RXRUNT_MAC0_REG SWITCH_REG_VALUE(0x308)
-+#define C_RXLONG_MAC0_REG SWITCH_REG_VALUE(0x30c)
-+#define C_RXDROP_MAC0_REG SWITCH_REG_VALUE(0x310)
-+#define C_RXCRC_MAC0_REG SWITCH_REG_VALUE(0x314)
-+#define C_RXARLDROP_MAC0_REG SWITCH_REG_VALUE(0x318)
-+#define C_VIDROP_MAC0_REG SWITCH_REG_VALUE(0x31c)
-+#define C_VEDROP_MAC0_REG SWITCH_REG_VALUE(0x320)
-+#define C_RXRL_MAC0_REG SWITCH_REG_VALUE(0x324)
-+#define C_RXPAUSE_MAC0_REG SWITCH_REG_VALUE(0x328)
-+
-+#define C_TXOKPKT_MAC0_REG SWITCH_REG_VALUE(0x32c)
-+#define C_TXOKBYTE_MAC0_REG SWITCH_REG_VALUE(0x330)
-+#define C_TXPAUSECOL_MAC0_REG SWITCH_REG_VALUE(0x334)
-+
-+#define C_RXOKPKT_MAC1_REG SWITCH_REG_VALUE(0x400)
-+#define C_RXOKBYTE_MAC1_REG SWITCH_REG_VALUE(0x404)
-+#define C_RXRUNT_MAC1_REG SWITCH_REG_VALUE(0x408)
-+#define C_RXLONG_MAC1_REG SWITCH_REG_VALUE(0x40c)
-+#define C_RXDROP_MAC1_REG SWITCH_REG_VALUE(0x410)
-+#define C_RXCRC_MAC1_REG SWITCH_REG_VALUE(0x414)
-+#define C_RXARLDROP_MAC1_REG SWITCH_REG_VALUE(0x418)
-+#define C_VIDROP_MAC1_REG SWITCH_REG_VALUE(0x41c)
-+#define C_VEDROP_MAC1_REG SWITCH_REG_VALUE(0x420)
-+#define C_RXRL_MAC1_REG SWITCH_REG_VALUE(0x424)
-+#define C_RXPAUSE_MAC1_REG SWITCH_REG_VALUE(0x428)
-+
-+#define C_TXOKPKT_MAC1_REG SWITCH_REG_VALUE(0x42c)
-+#define C_TXOKBYTE_MAC1_REG SWITCH_REG_VALUE(0x430)
-+#define C_TXPAUSECOL_MAC1_REG SWITCH_REG_VALUE(0x434)
-+
-+#define C_TSOKPKT_CPU_REG SWITCH_REG_VALUE(0x500)
-+#define C_TSOKBYTE_CPU_REG SWITCH_REG_VALUE(0x504)
-+#define C_TSRUNT_CPU_REG SWITCH_REG_VALUE(0x508)
-+#define C_TSLONG_CPU_REG SWITCH_REG_VALUE(0x50c)
-+#define C_TSNODSTDROP_CPU_REG SWITCH_REG_VALUE(0x510)
-+#define C_TSARLDROP_CPU_REG SWITCH_REG_VALUE(0x514)
-+#define C_TSVIDROP_CPU_REG SWITCH_REG_VALUE(0x518)
-+#define C_TSVEDROP_CPU_REG SWITCH_REG_VALUE(0x51c)
-+#define C_TSRL_CPU_REG SWITCH_REG_VALUE(0x520)
-+
-+#define C_FSOKPKT_CPU_REG SWITCH_REG_VALUE(0x524)
-+#define C_FSOKBYTE_CPU_REG SWITCH_REG_VALUE(0x528)
-+
-+#define C_RXOKPKT_MAC2_REG SWITCH_REG_VALUE(0x600)
-+#define C_RXOKBYTE_MAC2_REG SWITCH_REG_VALUE(0x604)
-+#define C_RXRUNT_MAC2_REG SWITCH_REG_VALUE(0x608)
-+#define C_RXLONG_MAC2_REG SWITCH_REG_VALUE(0x60c)
-+#define C_RXDROP_MAC2_REG SWITCH_REG_VALUE(0x610)
-+#define C_RXCRC_MAC2_REG SWITCH_REG_VALUE(0x614)
-+#define C_RXARLDROP_MAC2_REG SWITCH_REG_VALUE(0x618)
-+#define C_VIDROP_MAC2_REG SWITCH_REG_VALUE(0x61c)
-+#define C_VEDROP_MAC2_REG SWITCH_REG_VALUE(0x620)
-+#define C_RXRL_MAC2_REG SWITCH_REG_VALUE(0x624)
-+#define C_RXPAUSE_MAC2_REG SWITCH_REG_VALUE(0x628)
-+
-+#define C_TXOKPKT_MAC2_REG SWITCH_REG_VALUE(0x62c)
-+#define C_TXOKBYTE_MAC2_REG SWITCH_REG_VALUE(0x630)
-+#define C_TXPAUSECOL_MAC2_REG SWITCH_REG_VALUE(0x634)
-+
-+#define C_TXOKPKT_MAC0_EXT_REG SWITCH_REG_VALUE(0x72c)
-+#define C_TXOKBYTE_MAC0_EXT_REG SWITCH_REG_VALUE(0x730)
-+
-+#define CLK_GATE_REG PMU_REG_VALUE(0x0)
-+#define SOFT_RST_REG PMU_REG_VALUE(0x4)
-+#define PLL_HM_PD_CTRL_REG PMU_REG_VALUE(0x1c)
-+
-+#define GPIOB_PIN_EN_REG MISC_REG_VALUE(0x18)
-+#define IOCDA_REG MISC_REG_VALUE(0x1c)
-+
-+#define LEVEL_HIGH 0
-+#define RISING_EDGE 1
-+
-+#ifdef CONFIG_SILICON
-+
-+#define STATUS_INTERRUPT_ID 49
-+
-+#define FSRC_RING0_INTERRUPT_ID 51
-+#define FSQF_RING0_INTERRUPT_ID 53
-+
-+#define FSRC_RING1_INTERRUPT_ID 55
-+#define FSQF_RING1_INTERRUPT_ID 57
-+
-+#define TSTC_RING0_INTERRUPT_ID 50
-+
-+#define TSTC_RING1_INTERRUPT_ID 54
-+
-+#define HNAT_INTERRUPT_ID 58
-+
-+#else
-+
-+//#define STATUS_INTERRUPT_ID 49
-+#define STATUS_INTERRUPT_ID 38
-+//#define FSRC_RING0_INTERRUPT_ID 51
-+#define FSRC_RING0_INTERRUPT_ID 40
-+
-+#define TSQE_RING0_INTERRUPT_ID 52
-+
-+//#define FSQF_RING0_INTERRUPT_ID 53
-+#define FSQF_RING0_INTERRUPT_ID 42
-+
-+#define FSQF_RING1_INTERRUPT_ID 46
-+#define FSRC_RING1_INTERRUPT_ID 44
-+
-+//#define FSRC_RING1_INTERRUPT_ID 55
-+
-+#define TSTC_RING0_INTERRUPT_ID 39
-+#define TSTC_RING1_INTERRUPT_ID 43
-+
-+#define TSQE_RING1_INTERRUPT_ID 56
-+#define HNAT_INTERRUPT_ID 58
-+#endif // #ifdef CONFIG_SILICON
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/cns3xxx/cns3xxx_tool.h
-@@ -0,0 +1,898 @@
-+/*******************************************************************************
-+ *
-+ *
-+ * Copyright (c) 2009 Cavium Networks
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the Free
-+ * Software Foundation; either version 2 of the License, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program; if not, write to the Free Software Foundation, Inc., 59
-+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this distribution in the
-+ * file called LICENSE.
-+ *
-+ ********************************************************************************/
-+
-+#ifndef CNS3XXX_TOOL_H
-+#define CNS3XXX_TOOL_H
-+
-+#define PRINT_INFO printk
-+
-+#if defined(__KERNEL__)
-+
-+#include "cns3xxx.h"
-+#include <linux/kernel.h> // for printk
-+
-+#else // u-boot
-+
-+#endif
-+
-+#define SHOW_DEBUG_MESSAGE
-+#ifdef SHOW_DEBUG_MESSAGE
-+
-+extern int MSG_LEVEL;
-+
-+#define NO_MSG 0
-+#define NORMAL_MSG 1
-+#define WARNING_MSG (1 << 1)
-+#define CRITICAL_MSG (1 << 2)
-+#define DUMP_RX_PKT_INFO (1 << 3)
-+#define DUMP_TX_PKT_INFO (1 << 4)
-+
-+#define DEBUG_MSG(msg_level, fmt, args...)\
-+{ \
-+ int i=0; \
-+\
-+ for(i=0 ; i < 3 ; ++i) { \
-+ if ((MSG_LEVEL & msg_level) >> i) \
-+ printk(KERN_INFO "*cns3xxx gsw debug* " fmt, ## args); \
-+ } \
-+}
-+
-+#endif
-+
-+#define GET_MAC_PORT_CFG(port, cfg) \
-+{ \
-+ switch (port) \
-+ { \
-+ case MAC_PORT0: \
-+ { \
-+ cfg = MAC0_CFG_REG; \
-+ break; \
-+ } \
-+ case MAC_PORT1: \
-+ { \
-+ cfg = MAC1_CFG_REG; \
-+ break; \
-+ } \
-+ case MAC_PORT2: \
-+ { \
-+ cfg = MAC2_CFG_REG; \
-+ break; \
-+ } \
-+ } \
-+}
-+
-+#define SET_MAC_PORT_CFG(port, cfg) \
-+{ \
-+ switch (port) \
-+ { \
-+ case MAC_PORT0: \
-+ { \
-+ MAC0_CFG_REG = cfg; \
-+ break; \
-+ } \
-+ case MAC_PORT1: \
-+ { \
-+ MAC1_CFG_REG = cfg; \
-+ break; \
-+ } \
-+ case MAC_PORT2: \
-+ { \
-+ MAC2_CFG_REG = cfg; \
-+ break; \
-+ } \
-+ } \
-+}
-+
-+#define between(x, start, end) ((x)>=(start) && (x)<=(end))
-+static inline void print_packet(unsigned char *data, int len)
-+{
-+ int i,j;
-+
-+ printk("packet length: %d%s:\n", len, len>128?"(only show the first 128 bytes)":"");
-+#if 0
-+ if(len > 128) {
-+ len = 128;
-+ }
-+#endif
-+ for(i=0;len;) {
-+ if(len >=16 ) {
-+ for(j=0;j<16;j++) {
-+ printk("%02x ", data[i++]);
-+ }
-+ printk("| ");
-+
-+ i -= 16;
-+ for(j=0;j<16;j++) {
-+ if( between(data[i], 0x21, 0x7e) ) {
-+ printk("%c", data[i++]);
-+ }
-+ else {
-+ printk(".");
-+ i++;
-+ }
-+ }
-+ printk("\n");
-+
-+ len -= 16;
-+ }
-+ else {
-+ /* last line */
-+
-+ for(j=0; j<len; j++) {
-+ printk("%02x ", data[i++]);
-+ }
-+ for(;j<16;j++) {
-+ printk(" ");
-+ }
-+ printk("| ");
-+
-+ i -= len;
-+ for(j=0;j<len;j++) {
-+ if( between(data[i], 0x21, 0x7e) ) {
-+ printk("%c", data[i++]);
-+ }
-+ else {
-+ printk(".");
-+ i++;
-+ }
-+ }
-+ for(;j<16;j++) {
-+ printk(" ");
-+ }
-+ printk("\n");
-+
-+ len = 0;
-+ }
-+ }
-+ return;
-+
-+}
-+
-+static inline void cns3xxx_gsw_power_enable(void)
-+{
-+ PLL_HM_PD_CTRL_REG &= (~(1 << 2)); // power up PLL_RGMII (for MAC)
-+ CLK_GATE_REG |= (1 << 11); // enable switch clock
-+}
-+
-+static inline void cns3xxx_gsw_software_reset(void)
-+{
-+ SOFT_RST_REG &= (~(1 << 11));
-+ SOFT_RST_REG |= (1 << 11);
-+}
-+
-+
-+
-+
-+// port:
-+// 0 : mac port0
-+// 1 : mac port1
-+// 2 : mac port2
-+// 3 : cpu port
-+static inline void enable_port(u8 port, u8 enable)
-+{
-+ switch (port)
-+ {
-+ case 0:
-+ {
-+ (enable==1) ? (MAC0_CFG_REG &= (~(1 << 18)) ) : (MAC0_CFG_REG |= (1 << 18)) ;
-+
-+ break;
-+ }
-+ case 1:
-+ {
-+ (enable==1) ? (MAC1_CFG_REG &= (~(1 << 18)) ) : (MAC1_CFG_REG |= (1 << 18)) ;
-+ break;
-+ }
-+ case 2:
-+ {
-+ (enable==1) ? (MAC2_CFG_REG &= (~(1 << 18)) ) : (MAC2_CFG_REG |= (1 << 18)) ;
-+ break;
-+ }
-+ case 3:
-+ {
-+ (enable==1) ? (CPU_CFG_REG &= (~(1 << 18)) ) : (CPU_CFG_REG |= (1 << 18)) ;
-+ break;
-+ }
-+ }
-+}
-+
-+static inline int cns3xxx_vlan_table_lookup(VLANTableEntry *entry)
-+{
-+ VLAN_CTRL2_REG |= entry->vid;
-+ ARL_VLAN_CMD_REG |= (1 << 8); // look up vlan table command
-+
-+ // wait for vlan command complete
-+ while(( (ARL_VLAN_CMD_REG >> 9) & 1) == 0) ;
-+
-+ if (!((ARL_VLAN_CMD_REG >> 10) & 1)) {
-+ // not found any entry
-+ return CAVM_NOT_FOUND;
-+ }
-+
-+ entry->valid = ((VLAN_CTRL0_REG >> 31) & 0x1);
-+ entry->vid = ((VLAN_CTRL2_REG >> 31) & 0xfff);
-+ entry->wan_side = ((VLAN_CTRL0_REG >> 30) & 0x1);
-+ entry->etag_pmap = ((VLAN_CTRL0_REG >> 25) & 0x1f);
-+ entry->mb_pmap = ((VLAN_CTRL0_REG >> 9) & 0x1f);
-+
-+ entry->my_mac[0] = ((VLAN_CTRL1_REG >> 24) & 0xff);
-+ entry->my_mac[1] = ((VLAN_CTRL1_REG >> 16) & 0xff);
-+ entry->my_mac[2] = ((VLAN_CTRL1_REG >> 8) & 0xff);
-+ entry->my_mac[3] = (VLAN_CTRL1_REG & 0xff);
-+
-+ entry->my_mac[4] = ((VLAN_CTRL2_REG >> 24) & 0xff);
-+ entry->my_mac[5] = ((VLAN_CTRL2_REG >> 16) & 0xff);
-+
-+ return CAVM_FOUND;
-+}
-+
-+static inline int cns3xxx_vlan_table_read(VLANTableEntry *entry)
-+{
-+ //printf("VLAN_CTRL0_REG: %x\n", VLAN_CTRL0_REG);
-+ ARL_VLAN_CMD_REG &= (~0x3f);
-+ ARL_VLAN_CMD_REG |= (entry->vlan_index);
-+ ARL_VLAN_CMD_REG |= (1 << 7); // read vlan table command
-+ //printf("after read ARL_VLAN_CMD_REG: %x\n", ARL_VLAN_CMD_REG);
-+
-+ // wait for vlan command complete
-+ while(( (ARL_VLAN_CMD_REG >> 9) & 1) == 0) ;
-+
-+ //printf("ARL_VLAN_CMD_REG: %x\n", ARL_VLAN_CMD_REG);
-+ //printf("VLAN_CTRL0_REG: %x\n", VLAN_CTRL0_REG);
-+
-+ entry->valid = ((VLAN_CTRL0_REG >> 31) & 0x1);
-+ entry->vid = ((VLAN_CTRL2_REG) & 0xfff);
-+ entry->wan_side = ((VLAN_CTRL0_REG >> 30) & 0x1);
-+ entry->etag_pmap = ((VLAN_CTRL0_REG >> 25) & 0x1f);
-+ entry->mb_pmap = ((VLAN_CTRL0_REG >> 9) & 0x1f);
-+
-+ entry->my_mac[0] = ((VLAN_CTRL1_REG >> 24) & 0xff);
-+ entry->my_mac[1] = ((VLAN_CTRL1_REG >> 16) & 0xff);
-+ entry->my_mac[2] = ((VLAN_CTRL1_REG >> 8) & 0xff);
-+ entry->my_mac[3] = (VLAN_CTRL1_REG & 0xff);
-+
-+ entry->my_mac[4] = ((VLAN_CTRL2_REG >> 24) & 0xff);
-+ entry->my_mac[5] = ((VLAN_CTRL2_REG >> 16) & 0xff);
-+
-+ return CAVM_OK;
-+
-+}
-+
-+
-+// add a entry in the vlan table
-+static inline int cns3xxx_vlan_table_add(VLANTableEntry *entry)
-+{
-+ VLAN_CTRL0_REG = 0;
-+ VLAN_CTRL1_REG = 0;
-+ VLAN_CTRL2_REG = 0;
-+
-+#if 0
-+ printk("a [kernel mode] VLAN_CTRL0_REG: %x\n", VLAN_CTRL0_REG);
-+ printk("a [kernel mode] VLAN_CTRL1_REG: %x\n", VLAN_CTRL1_REG);
-+ printk("a [kernel mode] VLAN_CTRL2_REG: %x\n", VLAN_CTRL2_REG);
-+#endif
-+
-+ //printk("vlan_index: %x\n", entry->vlan_index);
-+ VLAN_CTRL0_REG |= (entry->valid << 31);
-+ //DEBUG_MSG(NORMAL_MSG, "1 [kernel mode] VLAN_CTRL0_REG: %x\n", VLAN_CTRL0_REG);
-+ VLAN_CTRL0_REG |= (entry->wan_side << 30);
-+ //DEBUG_MSG(NORMAL_MSG, "2 [kernel mode] VLAN_CTRL0_REG: %x\n", VLAN_CTRL0_REG);
-+ //printk("entry->etag_pmap: %x\n", entry->etag_pmap);
-+ VLAN_CTRL0_REG |= (entry->etag_pmap << 25);
-+ //DEBUG_MSG(NORMAL_MSG, "3 [kernel mode] VLAN_CTRL0_REG: %x\n", VLAN_CTRL0_REG);
-+ //printk("entry->mb_pmap: %x\n", entry->mb_pmap);
-+ VLAN_CTRL0_REG |= (entry->mb_pmap << 9);
-+ //DEBUG_MSG(NORMAL_MSG, "4 [kernel mode] VLAN_CTRL0_REG: %x\n", VLAN_CTRL0_REG);
-+ //printk("bb [kernel mode] VLAN_CTRL0_REG: %x\n", VLAN_CTRL0_REG);
-+
-+ //printf("vlan index: %d ## add VLAN_CTRL0_REG: %x\n", entry->vlan_index, VLAN_CTRL0_REG);
-+
-+
-+ VLAN_CTRL1_REG |= (entry->my_mac[0] << 24);
-+ VLAN_CTRL1_REG |= (entry->my_mac[1] << 16);
-+ VLAN_CTRL1_REG |= (entry->my_mac[2] << 8);
-+ VLAN_CTRL1_REG |= (entry->my_mac[3]);
-+
-+ VLAN_CTRL2_REG |= (entry->my_mac[4] << 24);
-+ VLAN_CTRL2_REG |= (entry->my_mac[5] << 16);
-+ VLAN_CTRL2_REG |= entry->vid;
-+
-+#if 0
-+ printk("b [kernel mode] VLAN_CTRL0_REG: %x\n", VLAN_CTRL0_REG);
-+ printk("b [kernel mode] VLAN_CTRL1_REG: %x\n", VLAN_CTRL1_REG);
-+ printk("b [kernel mode] VLAN_CTRL2_REG: %x\n", VLAN_CTRL2_REG);
-+#endif
-+
-+ ARL_VLAN_CMD_REG &= (~0x3f);
-+ ARL_VLAN_CMD_REG |= (entry->vlan_index);
-+ ARL_VLAN_CMD_REG |= (1 << 6); // write vlan table command
-+
-+
-+ //printf("after write ARL_VLAN_CMD_REG: %x\n", ARL_VLAN_CMD_REG);
-+
-+ // wait for vlan command complete
-+ while(( (ARL_VLAN_CMD_REG >> 9) & 1) == 0) ;
-+
-+ return CAVM_OK;
-+}
-+
-+static inline void print_arl_table_entry(ARLTableEntry *entry)
-+{
-+ printk("vid: %d\n", entry->vid);
-+ printk("pmap: %#x\n", entry->pmap);
-+ printk("age_field: %d\n", entry->age_field);
-+ printk("vlan_mac: %d\n", entry->vlan_mac);
-+ printk("filter: %d\n", entry->filter);
-+ printk("mac addr: %x:%x:%x:%x:%x:%x\n", entry->mac[0], entry->mac[1],entry->mac[2],entry->mac[3],entry->mac[4],entry->mac[5]);
-+
-+}
-+
-+
-+static inline int cns3xxx_arl_table_lookup(ARLTableEntry *entry)
-+{
-+ ARL_CTRL0_REG = 0;
-+ ARL_CTRL1_REG = 0;
-+ ARL_CTRL2_REG = 0;
-+
-+ ARL_CTRL0_REG |= (entry->vid << 16);
-+
-+ ARL_CTRL1_REG |= (entry->mac[0] << 24);
-+ ARL_CTRL1_REG |= (entry->mac[1] << 16);
-+ ARL_CTRL1_REG |= (entry->mac[2] << 8);
-+ ARL_CTRL1_REG |= entry->mac[3];
-+
-+ ARL_CTRL2_REG |= (entry->mac[4] << 24);
-+ ARL_CTRL2_REG |= (entry->mac[5] << 16);
-+
-+ ARL_VLAN_CMD_REG |= (1 << 18); // arl table lookup command
-+
-+ // wait arl command complete
-+ while(( (ARL_VLAN_CMD_REG >> 21) & 1) == 0);
-+
-+ if (( (ARL_VLAN_CMD_REG >> 23) & 1)) {
-+ // found
-+
-+ entry->vid = ((ARL_CTRL0_REG >> 16) & 0xfff);
-+ entry->pmap = ((ARL_CTRL0_REG >> 9) & 0x1f);
-+
-+ entry->age_field = ((ARL_CTRL2_REG >> 4 ) & 0x7);
-+ entry->vlan_mac = ((ARL_CTRL2_REG >> 1 ) & 0x1);
-+ entry->filter = (ARL_CTRL2_REG & 0x1);
-+ } else {
-+ // not found
-+ return CAVM_NOT_FOUND;
-+ }
-+#if 0
-+ printk("[kernel mode] ARL_VLAN_CMD_REG : %#x\n", ARL_VLAN_CMD_REG);
-+ printk("[kernel mode] ARL_CTRL0_REG : %#x\n", ARL_CTRL0_REG);
-+ printk("[kernel mode] ARL_CTRL1_REG : %#x\n", ARL_CTRL1_REG);
-+ printk("[kernel mode] ARL_CTRL2_REG : %#x\n", ARL_CTRL2_REG);
-+#endif
-+
-+ return CAVM_FOUND;
-+}
-+
-+static inline int cns3xxx_arl_table_search_again(ARLTableEntry *entry)
-+{
-+ ARL_CTRL0_REG = 0;
-+ ARL_CTRL1_REG = 0;
-+ ARL_CTRL2_REG = 0;
-+
-+ ARL_VLAN_CMD_REG |= (1 << 17); // arl table search again command
-+
-+ // wait arl command complete
-+ while(( (ARL_VLAN_CMD_REG >> 21) & 1) == 0);
-+
-+ if ((ARL_VLAN_CMD_REG >> 23) & 1) {
-+
-+ // found
-+ #if 0
-+ printk("[kernel mode] ARL_VLAN_CMD_REG : %#x\n", ARL_VLAN_CMD_REG);
-+ printk("[kernel mode] ARL_CTRL0_REG : %#x\n", ARL_CTRL0_REG);
-+ printk("[kernel mode] ARL_CTRL1_REG : %#x\n", ARL_CTRL1_REG);
-+ printk("[kernel mode] ARL_CTRL2_REG : %#x\n", ARL_CTRL2_REG);
-+ #endif
-+ entry->vid = ((ARL_CTRL0_REG >> 16) & 0xfff);
-+ entry->pmap = ((ARL_CTRL0_REG >> 9) & 0x1f);
-+
-+ entry->age_field = ((ARL_CTRL2_REG >> 4 ) & 0x7);
-+ entry->vlan_mac = ((ARL_CTRL2_REG >> 1 ) & 0x1);
-+ entry->filter = (ARL_CTRL2_REG & 0x1);
-+
-+ entry->mac[0] = (ARL_CTRL1_REG >> 24);
-+ entry->mac[1] = (ARL_CTRL1_REG >> 16);
-+ entry->mac[2] = (ARL_CTRL1_REG >> 8);
-+ entry->mac[3] = ARL_CTRL1_REG;
-+
-+ entry->mac[4] = (ARL_CTRL2_REG >> 24);
-+ entry->mac[5] = (ARL_CTRL2_REG >> 16);
-+
-+ return CAVM_FOUND;
-+ } else {
-+ // not found
-+ return CAVM_NOT_FOUND;
-+ }
-+}
-+
-+static inline int cns3xxx_is_arl_table_end(void)
-+{
-+ ARL_CTRL0_REG = 0;
-+ ARL_CTRL1_REG = 0;
-+ ARL_CTRL2_REG = 0;
-+
-+ if (( (ARL_VLAN_CMD_REG >> 22) & 1)) { // search to table end
-+ return CAVM_OK;
-+ } else {
-+ return CAVM_ERR;
-+ }
-+}
-+
-+static inline int cns3xxx_arl_table_search(ARLTableEntry *entry)
-+{
-+ ARL_CTRL0_REG = 0;
-+ ARL_CTRL1_REG = 0;
-+ ARL_CTRL2_REG = 0;
-+
-+#if 0
-+ ARL_CTRL0_REG |= (entry->vid << 16);
-+
-+ ARL_CTRL1_REG |= (entry->mac[0] << 24);
-+ ARL_CTRL1_REG |= (entry->mac[1] << 16);
-+ ARL_CTRL1_REG |= (entry->mac[2] << 8);
-+ ARL_CTRL1_REG |= entry->mac[3];
-+
-+ ARL_CTRL2_REG |= (entry->mac[4] << 24);
-+ ARL_CTRL2_REG |= (entry->mac[5] << 16);
-+#endif
-+ ARL_VLAN_CMD_REG |= (1 << 16); // arl table search start command
-+
-+ // wait arl command complete
-+ while(( (ARL_VLAN_CMD_REG >> 21) & 1) == 0);
-+
-+ if (((ARL_VLAN_CMD_REG >> 23) & 1)) {
-+ // found
-+ #if 0
-+ printk("[kernel mode] ARL_VLAN_CMD_REG : %#x\n", ARL_VLAN_CMD_REG);
-+ printk("[kernel mode] ARL_CTRL0_REG : %#x\n", ARL_CTRL0_REG);
-+ printk("[kernel mode] ARL_CTRL1_REG : %#x\n", ARL_CTRL1_REG);
-+ printk("[kernel mode] ARL_CTRL2_REG : %#x\n", ARL_CTRL2_REG);
-+ #endif
-+ entry->vid = ((ARL_CTRL0_REG >> 16) & 0xfff);
-+ entry->pmap = ((ARL_CTRL0_REG >> 9) & 0x1f);
-+
-+ entry->age_field = ((ARL_CTRL2_REG >> 4 ) & 0x7);
-+ entry->vlan_mac = ((ARL_CTRL2_REG >> 1 ) & 0x1);
-+ entry->filter = (ARL_CTRL2_REG & 0x1);
-+
-+ entry->mac[0] = (ARL_CTRL1_REG >> 24);
-+ entry->mac[1] = (ARL_CTRL1_REG >> 16);
-+ entry->mac[2] = (ARL_CTRL1_REG >> 8);
-+ entry->mac[3] = ARL_CTRL1_REG;
-+
-+ entry->mac[4] = (ARL_CTRL2_REG >> 24);
-+ entry->mac[5] = (ARL_CTRL2_REG >> 16);
-+
-+ return CAVM_FOUND;
-+ } else {
-+ // not found
-+ return CAVM_NOT_FOUND;
-+ }
-+}
-+
-+
-+// flush all age out entries except static entries
-+static inline int cns3xxx_arl_table_flush(void)
-+{
-+ ARL_VLAN_CMD_REG |= (1 << 20); // flush arl table command
-+
-+ // wait arl command complete
-+ while(( (ARL_VLAN_CMD_REG >> 21) & 1) == 0);
-+
-+
-+ return CAVM_OK;
-+}
-+
-+
-+// add a entry in the arl table
-+static inline int cns3xxx_arl_table_add(ARLTableEntry *entry)
-+{
-+ ARL_CTRL0_REG = 0;
-+ ARL_CTRL1_REG = 0;
-+ ARL_CTRL2_REG = 0;
-+
-+ entry->age_field = 7; // static entry
-+ ARL_CTRL0_REG |= (entry->vid << 16);
-+ ARL_CTRL0_REG |= (entry->pmap << 9);
-+
-+ ARL_CTRL1_REG |= (entry->mac[0] << 24);
-+ ARL_CTRL1_REG |= (entry->mac[1] << 16);
-+ ARL_CTRL1_REG |= (entry->mac[2] << 8);
-+ ARL_CTRL1_REG |= entry->mac[3];
-+
-+ ARL_CTRL2_REG |= (entry->mac[4] << 24);
-+ ARL_CTRL2_REG |= (entry->mac[5] << 16);
-+
-+ ARL_CTRL2_REG |= (entry->age_field << 4);
-+ ARL_CTRL2_REG |= (entry->vlan_mac << 1);
-+ ARL_CTRL2_REG |= (entry->filter);
-+
-+ //printk("entry->age_field: %d\n", entry->age_field);
-+ //printk("ARL_CTRL2_REG: %x\n", ARL_CTRL2_REG);
-+
-+ ARL_VLAN_CMD_REG |= (1 << 19); // arl table write command
-+
-+ // wait arl command complete
-+ while(( (ARL_VLAN_CMD_REG >> 21) & 1) == 0);
-+
-+ return CAVM_OK;
-+}
-+
-+// invalid a entry in the arl table
-+static inline int cns3xxx_arl_table_invalid(ARLTableEntry *entry)
-+{
-+ entry->age_field = 0; // invalid
-+ return cns3xxx_arl_table_add(entry);
-+}
-+
-+// port:
-+// 0 : mac port0
-+// 1 : mac port1
-+// 2 : mac port2
-+// 3 : cpu port
-+static inline void cns3xxx_set_pvid(u8 port, u16 pvid)
-+{
-+ switch (port)
-+ {
-+ case 0:
-+ {
-+ MAC1_MAC0_PVID_REG &= (~0x0fff);
-+ MAC1_MAC0_PVID_REG |= pvid;
-+ break;
-+ }
-+ case 1:
-+ {
-+ MAC1_MAC0_PVID_REG &= (~(0x0fff << 16));
-+ MAC1_MAC0_PVID_REG |= (pvid << 16);
-+ break;
-+ }
-+ case 2:
-+ {
-+ MAC2_CPU_PVID_REG &= (~(0x0fff << 16));
-+ MAC2_CPU_PVID_REG |= (pvid << 16);
-+ break;
-+ }
-+ case 3: // cpu port
-+ {
-+ MAC2_CPU_PVID_REG &= (~0x0fff);
-+ MAC2_CPU_PVID_REG |= pvid;
-+ break;
-+ }
-+ }
-+
-+
-+}
-+
-+static inline u16 cns3xxx_get_pvid(u8 port)
-+{
-+ // 0, 1, 2, cpu port
-+ u16 port_offset[]={0x9c, 0x9c, 0xa0, 0xa0};
-+ // 0, 1, 2, cpu port
-+ u16 port_shift[]={0, 16, 16, 0};
-+
-+ return ((SWITCH_REG_VALUE(port_offset[port]) >> port_shift[port]) & 0xfff);
-+}
-+
-+// which : 0 or 1
-+// enable: 0 or 1
-+static inline int enable_rx_dma(u8 which, u8 enable)
-+{
-+ if (which == 0 ) {
-+ FS_DMA_CTRL0_REG = enable;
-+ } else if (which == 1 ) {
-+ FS_DMA_CTRL1_REG = enable;
-+ } else {
-+ return CAVM_ERR;
-+ }
-+ return CAVM_OK;
-+}
-+
-+
-+// which : 0 or 1
-+// enable: 0 or 1
-+static inline int enable_tx_dma(u8 which, u8 enable)
-+{
-+ if (which == 0 ) {
-+ TS_DMA_CTRL0_REG = enable;
-+ } else if (which == 1 ) {
-+ TS_DMA_CTRL1_REG = enable;
-+ } else {
-+ return CAVM_ERR;
-+ }
-+ return CAVM_OK;
-+}
-+
-+#define DUMP_TX_DESC_PROC(tx_desc, page, num) \
-+{ \
-+ num += sprintf(page + num,"sdp: %x\n", tx_desc->sdp); \
-+ num += sprintf(page + num,"sdl: %d\n", tx_desc->sdl); \
-+ num += sprintf(page + num,"tco: %d\n", tx_desc->tco); \
-+ num += sprintf(page + num,"uco: %d\n", tx_desc->uco); \
-+ num += sprintf(page + num,"ico: %d\n", tx_desc->ico); \
-+ num += sprintf(page + num,"pri: %d\n", tx_desc->pri); \
-+ num += sprintf(page + num,"fp: %d\n", tx_desc->fp); \
-+ num += sprintf(page + num,"fr: %d\n", tx_desc->fr); \
-+ num += sprintf(page + num,"interrupt: %d\n", tx_desc->interrupt); \
-+ num += sprintf(page + num,"lsd: %d\n", tx_desc->lsd); \
-+ num += sprintf(page + num,"fsd: %d\n", tx_desc->fsd); \
-+ num += sprintf(page + num,"eor: %d\n", tx_desc->eor); \
-+ num += sprintf(page + num,"cown: %d\n", tx_desc->cown); \
-+ \
-+ num += sprintf(page + num,"ctv: %d\n", tx_desc->ctv); \
-+ num += sprintf(page + num,"stv: %d\n", tx_desc->stv); \
-+ num += sprintf(page + num,"sid: %d\n", tx_desc->sid); \
-+ num += sprintf(page + num,"inss: %d\n", tx_desc->inss); \
-+ num += sprintf(page + num,"dels: %d\n", tx_desc->dels); \
-+ num += sprintf(page + num,"pmap: %d\n", tx_desc->pmap); \
-+ num += sprintf(page + num,"mark: %d\n", tx_desc->mark); \
-+ num += sprintf(page + num,"ewan: %d\n", tx_desc->ewan); \
-+ num += sprintf(page + num,"fewan: %d\n", tx_desc->fewan); \
-+ \
-+ num += sprintf(page + num,"c_vid: %d\n", tx_desc->c_vid); \
-+ num += sprintf(page + num,"c_cfs: %d\n", tx_desc->c_cfs); \
-+ num += sprintf(page + num,"c_pri: %d\n", tx_desc->c_pri); \
-+ num += sprintf(page + num,"s_vid: %d\n", tx_desc->s_vid); \
-+ num += sprintf(page + num,"s_dei: %d\n", tx_desc->s_dei); \
-+ num += sprintf(page + num,"s_pri: %d\n", tx_desc->s_pri); \
-+}
-+
-+static inline void dump_tx_desc(TXDesc volatile *tx_desc)
-+{
-+ printk("sdp: %x\n", tx_desc->sdp);
-+ printk("sdl: %d\n", tx_desc->sdl);
-+ printk("tco: %d\n", tx_desc->tco);
-+ printk("uco: %d\n", tx_desc->uco);
-+ printk("ico: %d\n", tx_desc->ico);
-+ printk("pri: %d\n", tx_desc->pri);
-+ printk("fp: %d\n", tx_desc->fp);
-+ printk("fr: %d\n", tx_desc->fr);
-+ printk("interrupt: %d\n", tx_desc->interrupt);
-+ printk("lsd: %d\n", tx_desc->lsd);
-+ printk("fsd: %d\n", tx_desc->fsd);
-+ printk("eor: %d\n", tx_desc->eor);
-+ printk("cown: %d\n", tx_desc->cown);
-+
-+ printk("ctv: %d\n", tx_desc->ctv);
-+ printk("stv: %d\n", tx_desc->stv);
-+ printk("sid: %d\n", tx_desc->sid);
-+ printk("inss: %d\n", tx_desc->inss);
-+ printk("dels: %d\n", tx_desc->dels);
-+ printk("pmap: %d\n", tx_desc->pmap);
-+ printk("mark: %d\n", tx_desc->mark);
-+ printk("ewan: %d\n", tx_desc->ewan);
-+ printk("fewan: %d\n", tx_desc->fewan);
-+
-+ printk("c_vid: %d\n", tx_desc->c_vid);
-+ printk("c_cfs: %d\n", tx_desc->c_cfs);
-+ printk("c_pri: %d\n", tx_desc->c_pri);
-+ printk("s_vid: %d\n", tx_desc->s_vid);
-+ printk("s_dei: %d\n", tx_desc->s_dei);
-+ printk("s_pri: %d\n", tx_desc->s_pri);
-+}
-+
-+static inline void dump_rx_desc(RXDesc volatile *rx_desc)
-+{
-+
-+ printk("rx_desc: %p\n", rx_desc);
-+ //printk("rx_desc: %p ## cown: %d\n", rx_desc, rx_desc->cown);
-+ //printk("rx_desc phy addr : %x\n", (u32)page_to_dma(NULL, rx_desc) );
-+#if 0
-+ int i=0;
-+ for (i=0; i < 8 ; ++4) {
-+ u32 rx_desc_data = *((u32 *)(rx_desc+i));
-+ printk("%d: %#x\n", i, rx_desc_data);
-+ }
-+#endif
-+
-+ printk("sdp: %x\n", rx_desc->sdp);
-+
-+ printk("sdl: %d\n", rx_desc->sdl);
-+#if 1
-+ printk("l4f: %d\n", rx_desc->l4f);
-+ printk("ipf: %d\n", rx_desc->ipf);
-+ printk("prot: %d\n", rx_desc->prot);
-+ printk("hr: %d\n", rx_desc->hr);
-+ printk("lsd: %d\n", rx_desc->lsd);
-+ printk("fsd: %d\n", rx_desc->fsd);
-+ printk("eor: %d\n", rx_desc->eor);
-+#endif
-+ printk("cown: %d\n", rx_desc->cown);
-+
-+#if 1
-+ printk("ctv: %d\n", rx_desc->ctv);
-+ printk("stv: %d\n", rx_desc->stv);
-+ printk("unv: %d\n", rx_desc->unv);
-+ printk("iwan: %d\n", rx_desc->iwan);
-+ printk("exdv: %d\n", rx_desc->exdv);
-+ printk("sp: %d\n", rx_desc->sp);
-+ printk("crc_err: %d\n", rx_desc->crc_err);
-+ printk("un_eth: %d\n", rx_desc->un_eth);
-+ printk("tc: %d\n", rx_desc->tc);
-+ printk("ip_offset: %d\n", rx_desc->ip_offset);
-+
-+ printk("c_vid: %d\n", rx_desc->c_vid);
-+ printk("c_cfs: %d\n", rx_desc->c_cfs);
-+ printk("c_pri: %d\n", rx_desc->c_pri);
-+ printk("s_vid: %d\n", rx_desc->s_vid);
-+ printk("s_dei: %d\n", rx_desc->s_dei);
-+ printk("s_pri: %d\n", rx_desc->s_pri);
-+#endif
-+}
-+
-+static inline void dump_all_rx_ring(const RXRing *rx_ring, u8 r_index)
-+{
-+ int i=0;
-+
-+ RXBuffer volatile *rx_buf = get_rx_ring_head(rx_ring);
-+
-+ printk("all rx ring: %d\n", r_index);
-+ for (i=0 ; i < get_rx_ring_size(rx_ring) ; ++i) {
-+ printk("%d ## rx_buf: %p ## rx_buf->rx_desc: %p\n", i, rx_buf, rx_buf->rx_desc);
-+ dump_rx_desc(rx_buf->rx_desc);
-+ ++rx_buf;
-+ }
-+}
-+
-+static inline void rx_dma_suspend(u8 enable)
-+{
-+#if 1
-+ DMA_AUTO_POLL_CFG_REG &= (~0x00000001);
-+ if (enable == 1)
-+ DMA_AUTO_POLL_CFG_REG |= 1;
-+#endif
-+}
-+
-+
-+// clear: 0 normal
-+// clear: 1 clear
-+static inline void clear_fs_dma_state(u8 clear)
-+{
-+ DMA_RING_CTRL_REG &= (~(1 << 31));
-+ if (clear==1) {
-+ DMA_RING_CTRL_REG |= (1 << 31);
-+ }
-+}
-+
-+// enable: 1 -> IVL
-+// enable: 0 -> SVL
-+static inline void cns3xxx_ivl(u8 enable)
-+{
-+ // SVL
-+ MAC_GLOB_CFG_REG &= (~(0x1 << 7));
-+ if (enable == 1)
-+ MAC_GLOB_CFG_REG |= (0x1 << 7);
-+}
-+
-+static inline void cns3xxx_nic_mode(u8 enable)
-+{
-+ VLAN_CFG &= (~(1<<15));
-+ if (enable == 1)
-+ VLAN_CFG |= (1<<15);
-+}
-+
-+
-+void gic_mask_irq(unsigned int irq);
-+void gic_unmask_irq(unsigned int irq);
-+extern void __iomem *gic_cpu_base_addr;
-+
-+
-+static inline void cns3xxx_disable_irq(u32 irq)
-+{
-+#ifdef CONFIG_SMP
-+ disable_irq_nosync(irq);
-+#else
-+ disable_irq(irq);
-+#endif
-+ //gic_mask_irq(irq);
-+}
-+
-+static inline void cns3xxx_enable_irq(u32 irq)
-+{
-+ enable_irq(irq);
-+ //gic_unmask_irq(irq);
-+}
-+
-+static inline int cns3xxx_get_tx_hw_index(u8 ring_index)
-+{
-+ if (ring_index == 0) {
-+ return (TS_DESC_PTR0_REG - TS_DESC_BASE_ADDR0_REG) / sizeof (TXDesc);
-+ } else if (ring_index == 1) {
-+ return (TS_DESC_PTR1_REG - TS_DESC_BASE_ADDR1_REG) / sizeof (TXDesc);
-+ } else {
-+ return CAVM_ERR;
-+ }
-+}
-+
-+static inline TXBuffer* get_tx_buffer_by_index(TXRing *tx_ring, int i)
-+{
-+ int index = i;
-+
-+ index = ((index + get_tx_ring_size(tx_ring) )% get_tx_ring_size(tx_ring));
-+
-+ return tx_ring->head + index;
-+}
-+
-+static inline int cns3xxx_is_untag_packet(const RXDesc *rx_desc)
-+{
-+ return rx_desc->crc_err;
-+}
-+
-+
-+#ifdef CONFIG_SWITCH_BIG_ENDIAN
-+static inline void swap_rx_desc(RXDesc *org_desc, RXDesc *new_desc)
-+{
-+ int i=0;
-+ void *org_p = org_desc;
-+ void *new_p = new_desc;
-+
-+ for (i=0; i < 16 ; i+=4) {
-+ u32 rx_desc_data = 0;
-+ u32 swab_rx_desc_data = 0;
-+
-+ rx_desc_data = *((volatile u32 *)(org_p+i));
-+ swab_rx_desc_data = ___swab32(rx_desc_data);
-+
-+ *((volatile u32 *)(new_p+i)) = swab_rx_desc_data;
-+ }
-+}
-+
-+static inline void swap_tx_desc(TXDesc *org_desc, TXDesc *new_desc)
-+{
-+ int i=0;
-+ void *org_p = org_desc;
-+ void *new_p = new_desc;
-+
-+ for (i=0; i < 16 ; i+=4) {
-+ u32 desc_data = *((volatile u32 *)(org_p+i));
-+ u32 swab_desc_data = ___swab32(desc_data);
-+
-+ *((volatile u32 *)(new_p+i)) = swab_desc_data;
-+ }
-+}
-+
-+#endif
-+
-+
-+static inline int cns3xxx_min_mtu(void)
-+{
-+ return 64;
-+}
-+
-+static inline int cns3xxx_max_mtu(void)
-+{
-+ int max_len[]={1518, 1522, 1536, 9600};
-+
-+ return max_len[((PHY_AUTO_ADDR_REG >> 30) & 0x3)];
-+}
-+
-+#endif // CNS3XXX_TOOL_H
---- /dev/null
-+++ b/drivers/net/cns3xxx/fpga.h
-@@ -0,0 +1,306 @@
-+/*******************************************************************************
-+ *
-+ * Copyright (c) 2009 Cavium Networks
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the Free
-+ * Software Foundation; either version 2 of the License, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program; if not, write to the Free Software Foundation, Inc., 59
-+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this distribution in the
-+ * file called LICENSE.
-+ *
-+ ********************************************************************************/
-+
-+// This macro or function divide two part,
-+// one is initial state, another is in netdev open (ifconfig up) function.
-+
-+#ifndef FPGA_H
-+#define FPGA_H
-+
-+#include <linux/types.h>
-+
-+#include "cns3xxx_config.h"
-+#include "cns3xxx_phy.h"
-+
-+//#define FGPA
-+
-+
-+#ifdef CONFIG_FPGA
-+// init phy or switch chip
-+#define INIT_PORT0_PHY cns3xxx_config_VSC8601(0,0);
-+#define INIT_PORT1_PHY cns3xxx_config_VSC8601(1,1);
-+#define INIT_PORT2_PHY icp_101a_init(2, 2);
-+//#define INIT_PORT1_PHY
-+
-+// configure mac0/mac1 register
-+#define INIT_PORT0_MAC
-+#define INIT_PORT1_MAC
-+#define INIT_PORT2_MAC
-+//#define INIT_PORT1_MAC
-+
-+#define PORT0_LINK_DOWN vsc8601_power_down(0, 1);
-+#define PORT0_LINK_UP vsc8601_power_down(0, 0);
-+
-+#define PORT1_LINK_DOWN vsc8601_power_down(1, 1);
-+#define PORT1_LINK_UP vsc8601_power_down(1, 0);
-+
-+#define PORT2_LINK_DOWN cns3xxx_std_phy_power_down(2, 1);
-+#define PORT2_LINK_UP cns3xxx_std_phy_power_down(2, 0);
-+
-+
-+
-+#define MODEL "VEGA FPGA"
-+
-+static int rc_port0 = 0; // rc means reference counting, determine port open/close.
-+
-+
-+// enable port
-+// link down
-+static inline void open_port0(void)
-+{
-+ if (rc_port0 == 0) {
-+ enable_port(0, 1);
-+ PRINT_INFO("open mac port 0\n");
-+ // link up
-+ PORT0_LINK_UP
-+ } else {
-+ PRINT_INFO("port 0 already open\n");\
-+ }
-+ ++rc_port0;
-+}
-+
-+static inline void close_port0(void)
-+{
-+ --rc_port0;
-+ if (rc_port0 == 0) {
-+ // link down
-+ PORT0_LINK_DOWN
-+ enable_port(0, 0);
-+ PRINT_INFO("close mac port 0\n");\
-+ }
-+}
-+
-+static inline void open_port1(void)
-+{
-+
-+ enable_port(1, 1);
-+ PRINT_INFO("open mac port 1\n");
-+ // link up
-+ PORT1_LINK_UP
-+}
-+
-+static inline void close_port1(void)
-+{
-+ enable_port(1, 0);
-+ PRINT_INFO("close mac port 1\n");
-+ // link down
-+ PORT1_LINK_DOWN
-+}
-+
-+static inline void open_port2(void)
-+{
-+
-+ enable_port(2, 1);
-+ PRINT_INFO("open mac port 2\n");
-+ // link up
-+ PORT2_LINK_UP
-+}
-+
-+static inline void close_port2(void)
-+{
-+ enable_port(2, 0);
-+ PRINT_INFO("close mac port 2\n");
-+ // link down
-+ PORT2_LINK_DOWN
-+}
-+
-+static u8 my_vlan0_mac[] = {0x00, 0x11, 0x22, 0x33, 0x55, 0x00};
-+static u8 my_vlan1_mac[] = {0x00, 0x11, 0x22, 0x33, 0x55, 0x11};
-+static u8 my_vlan2_mac[] = {0x00, 0x11, 0xbb, 0xcc, 0xdd, 0x70};
-+static u8 my_vlan3_mac[] = {0x00, 0x11, 0xbb, 0xcc, 0xdd, 0x80};
-+
-+
-+
-+
-+// CNS3XXX_NIC_MODE_8021Q, CNS3XXX_NON_NIC_MODE_8021Q, CNS3XXX_VLAN_BASE_MODE and
-+// CNS3XXX_PORT_BASE_MODE, only one macro can be defined
-+
-+#ifdef CNS3XXX_VLAN_8021Q
-+ #ifndef CNS3XXX_NIC_MODE_8021Q
-+ #define CNS3XXX_NON_NIC_MODE_8021Q
-+ #endif
-+#else
-+ //#define CNS3XXX_VLAN_BASE_MODE
-+ #define CNS3XXX_PORT_BASE_MODE
-+#endif
-+
-+#ifdef CNS3XXX_PORT_BASE_MODE
-+
-+#define PORT0_PVID 0x1
-+#define PORT1_PVID 0x2
-+#define PORT2_PVID 3
-+#define CPU_PVID 5
-+
-+#define CONFIG_CNS3XXX_PORT_BASE
-+
-+static VLANTableEntry cpu_vlan_table_entry = {0, 1, CPU_PVID, 0, 0, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan3_mac};
-+
-+static VLANTableEntry vlan_table_entry[] =
-+{
-+ // vlan_index; valid; vid; wan_side; etag_pmap; mb_pmap; *my_mac;
-+ //{0, 1, 1, 0, 0, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan0_mac},
-+ {1, 1, PORT0_PVID, 0, 0, MAC_PORT0_PMAP | CPU_PORT_PMAP, my_vlan0_mac},
-+ {2, 1, PORT1_PVID, 0, 0, MAC_PORT1_PMAP | CPU_PORT_PMAP, my_vlan1_mac},
-+ {3, 1, PORT2_PVID, 1, 0, MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan2_mac},
-+ //{2, 1, 4, 0, 0, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan3_mac}, // for cpu
-+};
-+
-+static ARLTableEntry arl_table_entry[] =
-+{
-+ // vid; pmap; *mac; age_field; vlan_mac ; filter
-+ {PORT0_PVID, CPU_PORT_PMAP, my_vlan0_mac, 7, 1, 0},
-+ //{CPU_PVID, CPU_PORT_PMAP, my_vlan0_mac, 7, 1, 0},
-+ {PORT1_PVID, CPU_PORT_PMAP, my_vlan1_mac, 7, 1, 0},
-+ {PORT2_PVID, CPU_PORT_PMAP, my_vlan2_mac, 7, 1, 0},
-+ //{PORT0_PVID, MAC_PORT0_PMAP, my_vlan8_mac, 7, 0, 0},
-+ //{PORT0_PVID, MAC_PORT0_PMAP, my_vlan9_mac, 7, 0, 0},
-+ //{CPU_PVID, 0x4, my_vlan2_mac, 7, 1, 0},
-+ //{CPU_PVID, MAC_PORT2_PMAP, my_vlan2_mac, 7, 1, 0},
-+};
-+
-+static NetDevicePriv net_device_prive[]= {
-+ /* pmap, is_wan, s-tag, vlan_tag or pvid, rx_func_ptr, tx_func_ptr, open_ptr, close_ptr, which port, mac, VLANTableEntry, ARLTableEntry, NICSetting, netdev s-tag, name */
-+ {MAC_PORT0_PMAP, 0, 1, PORT0_NETDEV_INDEX, rx_port_base, tx_port_base, open_port0, close_port0, MAC_PORT0, my_vlan0_mac, &vlan_table_entry[0], &arl_table_entry[0], 0, 0}, // eth0
-+ {MAC_PORT1_PMAP, 0, 2, PORT1_NETDEV_INDEX, rx_port_base, tx_port_base, open_port1, close_port1, MAC_PORT1, my_vlan1_mac, &vlan_table_entry[1], &arl_table_entry[1], 0, 0}, // eth1
-+ {MAC_PORT2_PMAP, 1, 3, PORT2_NETDEV_INDEX, rx_port_base, tx_port_base, open_port2, close_port2, MAC_PORT2, my_vlan2_mac, &vlan_table_entry[2], &arl_table_entry[2], 0, 0} // eth2
-+ };
-+
-+#endif
-+
-+#ifdef CNS3XXX_NON_NIC_MODE_8021Q
-+//#error "8021Q"
-+#define PORT0_PVID 50
-+#define PORT1_PVID 60
-+#define PORT2_PVID 70
-+#define CPU_PVID 80
-+
-+#define CONFIG_CNS3XXX_PORT_BASE
-+//#define CONFIG_CNS3XXX_VLAN_BASE
-+//#define CONFIG_HAVE_VLAN_TAG
-+
-+static VLANTableEntry cpu_vlan_table_entry = {0, 1, CPU_PVID, 0, 0, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan3_mac}; // for cpu
-+
-+static VLANTableEntry vlan_table_entry[] =
-+{
-+ // vlan_index; valid; vid; wan_side; etag_pmap; mb_pmap; *my_mac;C_PORT2_PMAP
-+ {1, 1, PORT0_PVID, 0, CPU_PORT_PMAP, MAC_PORT0_PMAP | CPU_PORT_PMAP, my_vlan0_mac},
-+ {2, 1, PORT1_PVID, 0, CPU_PORT_PMAP, MAC_PORT1_PMAP | CPU_PORT_PMAP, my_vlan1_mac},
-+ {3, 1, PORT2_PVID, 0, CPU_PORT_PMAP, MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan2_mac},
-+};
-+
-+static ARLTableEntry arl_table_entry[] =
-+{
-+ // vid; pmap; *mac; age_field; vlan_mac ; filter
-+ {PORT0_PVID, CPU_PORT_PMAP, my_vlan0_mac, 7, 1, 0},
-+ {PORT1_PVID, CPU_PORT_PMAP, my_vlan1_mac, 7, 1, 0},
-+ {PORT2_PVID, CPU_PORT_PMAP, my_vlan2_mac, 7, 1, 0},
-+};
-+
-+
-+// if used 8021Q, use PORT0_NETDEV_INDEX, don't use VID
-+static NetDevicePriv net_device_prive[]= {
-+ {MAC_PORT0_PMAP, 0, 1, PORT0_NETDEV_INDEX, rx_port_base, tx_port_base, open_port0, close_port0, MAC_PORT0, my_vlan0_mac, &vlan_table_entry[0], &arl_table_entry[0], 0, 0}, // eth0
-+ {MAC_PORT1_PMAP, 0, 0, PORT1_NETDEV_INDEX, rx_port_base, tx_port_base, open_port1, close_port1, MAC_PORT1, my_vlan1_mac, &vlan_table_entry[1], &arl_table_entry[1], 0, 0}, // eth1
-+ {MAC_PORT2_PMAP, 1, 3, PORT2_NETDEV_INDEX, rx_port_base, tx_port_base, open_port2, close_port2, MAC_PORT2, my_vlan2_mac, &vlan_table_entry[2], &arl_table_entry[2], 0, 0} // eth2
-+ };
-+#endif
-+
-+
-+
-+#ifdef CNS3XXX_NIC_MODE_8021Q
-+//#error "8021Q"
-+#define PORT0_PVID 1
-+#define PORT1_PVID 2
-+#define PORT2_PVID 9
-+#define CPU_PVID 5
-+
-+#define CONFIG_CNS3XXX_PORT_BASE
-+//#define CONFIG_CNS3XXX_VLAN_BASE
-+//#define CONFIG_HAVE_VLAN_TAG
-+
-+static VLANTableEntry cpu_vlan_table_entry = {0, 1, CPU_PVID, 0, 0, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan3_mac}; // for cpu
-+
-+static VLANTableEntry vlan_table_entry[] =
-+{
-+ // vlan_index; valid; vid; wan_side; etag_pmap; mb_pmap; *my_mac;C_PORT2_PMAP
-+ {1, 1, PORT0_PVID, 1, MAC_PORT0_PMAP|CPU_PORT_PMAP, MAC_PORT0_PMAP | CPU_PORT_PMAP, my_vlan0_mac},
-+ {2, 1, PORT1_PVID, 0, MAC_PORT1_PMAP|CPU_PORT_PMAP, MAC_PORT1_PMAP | CPU_PORT_PMAP, my_vlan1_mac},
-+ {3, 1, PORT2_PVID, 1, MAC_PORT2_PMAP|CPU_PORT_PMAP, MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan2_mac},
-+};
-+
-+static ARLTableEntry arl_table_entry[] =
-+{
-+ // vid; pmap; *mac; age_field; vlan_mac ; filter
-+ {PORT0_PVID, CPU_PORT_PMAP, my_vlan0_mac, 7, 1, 0},
-+ {PORT1_PVID, CPU_PORT_PMAP, my_vlan1_mac, 7, 1, 0},
-+ {PORT2_PVID, CPU_PORT_PMAP, my_vlan2_mac, 7, 1, 0},
-+};
-+
-+
-+// if used 8021Q, use PORT0_NETDEV_INDEX, don't use VID
-+static NetDevicePriv net_device_prive[]= {
-+ {MAC_PORT0_PMAP, 0, 1, PORT0_NETDEV_INDEX, rx_port_base, tx_port_base, open_port0, close_port0, MAC_PORT0, my_vlan0_mac, &vlan_table_entry[0], &arl_table_entry[0], 0, 0}, // eth0
-+ {MAC_PORT1_PMAP, 0, 0, PORT1_NETDEV_INDEX, rx_port_base, tx_port_base, open_port1, close_port1, MAC_PORT1, my_vlan1_mac, &vlan_table_entry[1], &arl_table_entry[1], 0, 0}, // eth1
-+ {MAC_PORT2_PMAP, 1, 3, PORT2_NETDEV_INDEX, rx_port_base, tx_port_base, open_port2, close_port2, MAC_PORT2, my_vlan2_mac, &vlan_table_entry[2], &arl_table_entry[2], 0, 0} // eth2
-+ };
-+#endif
-+
-+#ifdef CNS3XXX_VLAN_BASE_MODE
-+//#error "vlan_base"
-+// vlan configuration
-+
-+#define PORT0_PVID 1
-+#define PORT1_PVID 2
-+#define PORT2_PVID 3
-+#define CPU_PVID 5
-+#define CONFIG_CNS3XXX_VLAN_BASE
-+#define CONFIG_HAVE_VLAN_TAG
-+
-+static VLANTableEntry cpu_vlan_table_entry = {0, 1, CPU_PVID, 0, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan3_mac}; // for cpu
-+
-+static VLANTableEntry vlan_table_entry[] =
-+{
-+ // vlan_index; valid; vid; wan_side; etag_pmap; mb_pmap; *my_mac;
-+ {1, 1, PORT0_PVID, 0, MAC_PORT0_PMAP | CPU_PORT_PMAP, MAC_PORT0_PMAP | CPU_PORT_PMAP, my_vlan0_mac},
-+ {2, 1, PORT1_PVID, 0, MAC_PORT1_PMAP | CPU_PORT_PMAP, MAC_PORT1_PMAP | CPU_PORT_PMAP, my_vlan1_mac},
-+ {3, 1, PORT2_PVID, 1, MAC_PORT2_PMAP | CPU_PORT_PMAP, MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan2_mac},
-+};
-+
-+static ARLTableEntry arl_table_entry[] =
-+{
-+ // vid; pmap; *mac; age_field; vlan_mac ; filter
-+ {PORT0_PVID, CPU_PORT_PMAP, my_vlan0_mac, 7, 1, 0},
-+ {PORT1_PVID, CPU_PORT_PMAP, my_vlan1_mac, 7, 1, 0},
-+ {PORT2_PVID, CPU_PORT_PMAP, my_vlan2_mac, 7, 1, 0},
-+};
-+
-+static NetDevicePriv net_device_prive[]= {
-+ /* pmap, is_wan, gid, vlan_tag or pvid, rx_func_ptr, tx_func_ptr, open_ptr, close_ptr, which port, mac, VLANTableEntry, ARLTableEntry, NICSetting, netdev name */
-+ {MAC_PORT0_PMAP, 0, 1, PORT0_PVID, rx_port_base, tx_vlan_base, open_port0, close_port0, MAC_PORT0, my_vlan0_mac, &vlan_table_entry[0], &arl_table_entry[0], 0, 0}, // eth0
-+ {MAC_PORT1_PMAP, 0, 0, PORT1_PVID, rx_port_base, tx_vlan_base, open_port1, close_port1, MAC_PORT1, my_vlan1_mac, &vlan_table_entry[1], &arl_table_entry[1], 0, 0}, // eth1
-+ {MAC_PORT2_PMAP, 1, 3, PORT2_PVID, rx_port_base, tx_vlan_base, open_port2, close_port2, MAC_PORT2, my_vlan2_mac, &vlan_table_entry[2], &arl_table_entry[2], 0, 0} // eth2
-+ };
-+#endif
-+
-+#endif // CONFIG_FPGA
-+#endif // FPGA_H
---- /dev/null
-+++ b/drivers/net/cns3xxx/Kconfig
-@@ -0,0 +1,58 @@
-+menu "CNS3XXX Gigabit Switch Support"
-+ depends on ARCH_CNS3XXX
-+
-+config CNS3XXX_GSW
-+ tristate "CNS3XXX Gigabit Switch Driver Support"
-+ help
-+ CNS3XXX Gigabit Switch.
-+
-+config CNS3XXX_SPPE
-+ bool "CNS3XXX Smart PPE(Packet Processing Engine) Support"
-+ depends on CNS3XXX_GSW
-+ help
-+ PPE(Packet Processing Engine) is a hardware accelerator hook on a port of
-+ CNS3XXX Gigabit Switch.
-+
-+ This option is used for Smart PPE hook.
-+
-+ Say Y if you want to enable Smart PPE function.
-+
-+config CNS3XXX_HCIE_TEST
-+ bool "CNS3XXX HCIE(Hardware Content Inspection Engine) Support"
-+# depends on CNS3XXX_GSW
-+ help
-+ HCIE is patent-protected layer-7 packet processing engine.
-+
-+ This option is used for fundamental HCIE functional test .
-+ Say Y if you want to do HCIE functional test.
-+
-+
-+#config CNS3XXX_SHNAT_PCI_FASTPATH
-+# bool "FastPath(From PCI to WAN) Support"
-+# depends on CNS3XXX_SHNAT
-+# help
-+# Add FastPath Support for Smart HNAT.
-+
-+comment "NOTE: 'Validation Board' depends on"
-+comment "GPIO_CNS3XXX and SPI_CNS3XXX"
-+choice
-+ prompt "CNS3XXX Board"
-+ depends on CNS3XXX_GSW
-+ default FPGA
-+
-+config FPGA
-+ bool "Fpga"
-+
-+config VB
-+ bool "Validation Board"
-+ help
-+ MAC0 and MAC1 connect to BCM53115M. It need enable CNS3XXX SPI and CNS3XXX GPIO option.
-+ MAC2 use ICPLUS IP1001 phy.
-+
-+#config LEO
-+# bool "Leo"
-+
-+endchoice
-+
-+endmenu
-+
---- /dev/null
-+++ b/drivers/net/cns3xxx/Makefile
-@@ -0,0 +1,41 @@
-+################################################################################
-+#
-+#
-+# Copyright (c) 2008 Cavium Networks
-+#
-+# This program is free software; you can redistribute it and/or modify it
-+# under the terms of the GNU General Public License as published by the Free
-+# Software Foundation; either version 2 of the License, or (at your option)
-+# any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but WITHOUT
-+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+# more details.
-+#
-+# You should have received a copy of the GNU General Public License along with
-+# this program; if not, write to the Free Software Foundation, Inc., 59
-+# Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+#
-+# The full GNU General Public License is included in this distribution in the
-+# file called LICENSE.
-+#
-+# Contact Information:
-+# Star semiconduction Linux Support <support@starsemi.com>
-+#
-+################################################################################
-+
-+#
-+# Makefile for the Star GSW ethernet driver
-+#
-+
-+#obj-y :=
-+#obj-m :=
-+
-+obj-$(CONFIG_CNS3XXX_GSW) += cns3xxx.o
-+cns3xxx-objs := cns3xxx_phy.o cns3xxx_main.o cns3xxx_ethtool.o
-+obj-$(CONFIG_CNS3XXX_SPPE) += cns3xxx_sppe_hook.o
-+#endif
-+#vega_main.o
-+
-+#include $(TOPDIR)/Rules.make
---- /dev/null
-+++ b/drivers/net/cns3xxx/vb.h
-@@ -0,0 +1,328 @@
-+/*******************************************************************************
-+ *
-+ * Copyright (c) 2009 Cavium Networks
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the Free
-+ * Software Foundation; either version 2 of the License, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program; if not, write to the Free Software Foundation, Inc., 59
-+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this distribution in the
-+ * file called LICENSE.
-+ *
-+ ********************************************************************************/
-+
-+// This macro or function divide two part,
-+// one is initial state, another is in netdev open (ifconfig up) function.
-+
-+#ifndef VB_H
-+#define VB_H
-+
-+#include <linux/types.h>
-+
-+#include "cns3xxx_config.h"
-+#include "cns3xxx_phy.h"
-+
-+#ifdef CONFIG_VB
-+// init phy or switch chip
-+#define INIT_PORT0_PHY cns3xxx_config_VSC8601(0, 0);
-+#define INIT_PORT1_PHY cns3xxx_config_VSC8601(1, 1);
-+#define INIT_PORT2_PHY
-+//#define INIT_PORT1_PHY
-+
-+// configure mac0/mac1 register
-+#define INIT_PORT0_MAC
-+#define INIT_PORT1_MAC
-+#define INIT_PORT2_MAC
-+//#define INIT_PORT1_MAC
-+
-+#define PORT0_LINK_DOWN cns3xxx_std_phy_power_down(0, 1);
-+#define PORT0_LINK_UP cns3xxx_std_phy_power_down(0, 0);
-+
-+#define PORT1_LINK_DOWN cns3xxx_std_phy_power_down(1, 1);
-+#define PORT1_LINK_UP cns3xxx_std_phy_power_down(1, 0);
-+
-+#define PORT2_LINK_DOWN
-+#define PORT2_LINK_UP
-+
-+#define MODEL "CNS3XXX validation board"
-+
-+static int rc_port0 = 0; // rc means reference counting, determine port open/close.
-+
-+#define PRINT_INFO printk
-+
-+// enable port
-+// link down
-+static inline void open_port0(void)
-+{
-+ if (rc_port0 == 0) {
-+ enable_port(0, 1);
-+ // link up
-+ PORT0_LINK_UP
-+ }
-+ ++rc_port0;
-+}
-+
-+static inline void close_port0(void)
-+{
-+ --rc_port0;
-+ if (rc_port0 == 0) {
-+ // link down
-+ PORT0_LINK_DOWN
-+ enable_port(0, 0);
-+ }
-+}
-+
-+static inline void open_port1(void)
-+{
-+
-+ enable_port(1, 1);
-+ // link up
-+ PORT1_LINK_UP
-+}
-+
-+static inline void close_port1(void)
-+{
-+ enable_port(1, 0);
-+ // link down
-+ PORT1_LINK_DOWN
-+}
-+
-+static inline void open_port2(void)
-+{
-+
-+ enable_port(2, 1);
-+ // link up
-+ PORT2_LINK_UP
-+}
-+
-+static inline void close_port2(void)
-+{
-+ enable_port(2, 0);
-+ // link down
-+ PORT2_LINK_DOWN
-+}
-+
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+/* only for PPE PCI-to-WAN fast path */
-+static int fp_ref_cnt = 0;
-+static inline void open_fp(void)
-+{
-+ if (!fp_ref_cnt) {
-+ fp_ref_cnt++;
-+ }
-+}
-+
-+static inline void close_fp(void)
-+{
-+ if (fp_ref_cnt) {
-+ fp_ref_cnt--;
-+ }
-+}
-+#endif
-+
-+static u8 my_vlan0_mac[] = {0x00, 0x11, 0x22, 0x33, 0x55, 0x00};
-+static u8 my_vlan1_mac[] = {0x00, 0x11, 0x22, 0x33, 0x55, 0x11};
-+static u8 my_vlan2_mac[] = {0x00, 0x11, 0xbb, 0xcc, 0xdd, 0x70};
-+static u8 my_vlan3_mac[] = {0x00, 0x11, 0xbb, 0xcc, 0xdd, 0x80};
-+
-+
-+
-+
-+// CNS3XXX_NIC_MODE_8021Q, CNS3XXX_NON_NIC_MODE_8021Q, CNS3XXX_VLAN_BASE_MODE and
-+// CNS3XXX_PORT_BASE_MODE, only one macro can be defined
-+
-+#ifdef CNS3XXX_VLAN_8021Q
-+ #define CNS3XXX_NIC_MODE_8021Q
-+ #ifndef CNS3XXX_NIC_MODE_8021Q
-+ #define CNS3XXX_NON_NIC_MODE_8021Q
-+ #endif
-+#else
-+ //#define CNS3XXX_VLAN_BASE_MODE
-+ #define CNS3XXX_PORT_BASE_MODE
-+#endif
-+
-+//#define CNS3XXX_PORT_BASE_MODE
-+//
-+#ifdef CNS3XXX_NON_NIC_MODE_8021Q
-+
-+#define PORT0_PVID 50
-+#define PORT1_PVID 60
-+#define PORT2_PVID 70
-+#define CPU_PVID 80
-+
-+#define CONFIG_CNS3XXX_PORT_BASE
-+
-+static VLANTableEntry cpu_vlan_table_entry = {0, 1, CPU_PVID, 0, 0, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan3_mac};
-+
-+static VLANTableEntry vlan_table_entry[] =
-+{
-+ // vlan_index; valid; vid; wan_side; etag_pmap; mb_pmap; *my_mac;
-+ #if 0
-+ {1, 1, PORT0_PVID, 0, 0, MAC_PORT0_PMAP | CPU_PORT_PMAP, my_vlan0_mac},
-+ {2, 1, PORT1_PVID, 0, 0, MAC_PORT1_PMAP | CPU_PORT_PMAP, my_vlan1_mac},
-+ {3, 1, PORT2_PVID, 1, 0, MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan2_mac},
-+ #endif
-+
-+ {1, 1, PORT0_PVID, 0, CPU_PORT_PMAP, MAC_PORT0_PMAP | CPU_PORT_PMAP, my_vlan0_mac},
-+ {2, 1, PORT1_PVID, 0, CPU_PORT_PMAP, MAC_PORT1_PMAP | CPU_PORT_PMAP, my_vlan1_mac},
-+ {3, 1, PORT2_PVID, 0, CPU_PORT_PMAP, MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan2_mac},
-+ //{2, 1, 4, 0, 0, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan3_mac}, // for cpu
-+};
-+
-+static ARLTableEntry arl_table_entry[] =
-+{
-+ // vid; pmap; *mac; age_field; vlan_mac ; filter
-+ {PORT0_PVID, CPU_PORT_PMAP, my_vlan0_mac, 7, 1, 0},
-+ //{CPU_PVID, CPU_PORT_PMAP, my_vlan0_mac, 7, 1, 0},
-+ {PORT1_PVID, CPU_PORT_PMAP, my_vlan1_mac, 7, 1, 0},
-+ {PORT2_PVID, CPU_PORT_PMAP, my_vlan2_mac, 7, 1, 0},
-+ //{PORT0_PVID, MAC_PORT0_PMAP, my_vlan8_mac, 7, 0, 0},
-+ //{PORT0_PVID, MAC_PORT0_PMAP, my_vlan9_mac, 7, 0, 0},
-+ //{CPU_PVID, 0x4, my_vlan2_mac, 7, 1, 0},
-+ //{CPU_PVID, MAC_PORT2_PMAP, my_vlan2_mac, 7, 1, 0},
-+};
-+
-+static NetDevicePriv net_device_prive[]= {
-+ /* pmap, is_wan, s-tag, vlan_tag or pvid, rx_func_ptr, tx_func_ptr, open_ptr, close_ptr, which port, mac, VLANTableEntry, ARLTableEntry, NICSetting, netdev s-tag, name */
-+ {MAC_PORT0_PMAP, 0, 1, PORT0_NETDEV_INDEX, rx_port_base, tx_port_base, open_port0, close_port0, MAC_PORT0, my_vlan0_mac, &vlan_table_entry[0], &arl_table_entry[0], 0, 0}, // eth0
-+ {MAC_PORT1_PMAP, 0, 2, PORT1_NETDEV_INDEX, rx_port_base, tx_port_base, open_port1, close_port1, MAC_PORT1, my_vlan1_mac, &vlan_table_entry[1], &arl_table_entry[1], 0, 0}, // eth1
-+ {MAC_PORT2_PMAP, 1, 3, PORT2_NETDEV_INDEX, rx_port_base, tx_port_base, open_port2, close_port2, MAC_PORT2, my_vlan2_mac, &vlan_table_entry[2], &arl_table_entry[2], 0, 0} // eth2
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+ ,{CPU_PORT_PMAP, 0, 1, FP_NETDEV_INDEX, NULL, fp_port_base,
-+ open_fp, close_fp, CPU_PORT, my_vlan3_mac, &cpu_vlan_table_entry,
-+ 0, 0, "fp"}
-+#endif
-+ };
-+
-+#endif // CNS3XXX_PORT_BASE_MODE
-+
-+#ifdef CNS3XXX_PORT_BASE_MODE
-+
-+#define PORT0_PVID 0x1
-+#define PORT1_PVID 0x2
-+#define PORT2_PVID 3
-+#define CPU_PVID 5
-+
-+#define CONFIG_CNS3XXX_PORT_BASE
-+
-+static VLANTableEntry cpu_vlan_table_entry = {0, 1, CPU_PVID, 0, 0, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan3_mac};
-+
-+static VLANTableEntry vlan_table_entry[] =
-+{
-+ // vlan_index; valid; vid; wan_side; etag_pmap; mb_pmap; *my_mac;
-+ //{0, 1, 1, 0, 0, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan0_mac},
-+ {1, 1, PORT0_PVID, 0, 0, MAC_PORT0_PMAP | CPU_PORT_PMAP, my_vlan0_mac},
-+ {2, 1, PORT1_PVID, 0, 0, MAC_PORT1_PMAP | CPU_PORT_PMAP, my_vlan1_mac},
-+ {3, 1, PORT2_PVID, 1, 0, MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan2_mac},
-+ //{2, 1, 4, 0, 0, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan3_mac}, // for cpu
-+};
-+
-+static ARLTableEntry arl_table_entry[] =
-+{
-+ // vid; pmap; *mac; age_field; vlan_mac ; filter
-+ {PORT0_PVID, CPU_PORT_PMAP, my_vlan0_mac, 7, 1, 0},
-+ //{CPU_PVID, CPU_PORT_PMAP, my_vlan0_mac, 7, 1, 0},
-+ {PORT1_PVID, CPU_PORT_PMAP, my_vlan1_mac, 7, 1, 0},
-+ {PORT2_PVID, CPU_PORT_PMAP, my_vlan2_mac, 7, 1, 0},
-+ //{PORT0_PVID, MAC_PORT0_PMAP, my_vlan8_mac, 7, 0, 0},
-+ //{PORT0_PVID, MAC_PORT0_PMAP, my_vlan9_mac, 7, 0, 0},
-+ //{CPU_PVID, 0x4, my_vlan2_mac, 7, 1, 0},
-+ //{CPU_PVID, MAC_PORT2_PMAP, my_vlan2_mac, 7, 1, 0},
-+};
-+
-+static NetDevicePriv net_device_prive[]= {
-+ /* pmap, is_wan, s-tag, vlan_tag or pvid, rx_func_ptr, tx_func_ptr, open_ptr, close_ptr, which port, mac, VLANTableEntry, ARLTableEntry, NICSetting, netdev s-tag, name */
-+ {MAC_PORT0_PMAP, 0, 1, PORT0_NETDEV_INDEX, rx_port_base, tx_port_base, open_port0, close_port0, MAC_PORT0, my_vlan0_mac, &vlan_table_entry[0], &arl_table_entry[0], 0, 0}, // eth0
-+ {MAC_PORT1_PMAP, 0, 2, PORT1_NETDEV_INDEX, rx_port_base, tx_port_base, open_port1, close_port1, MAC_PORT1, my_vlan1_mac, &vlan_table_entry[1], &arl_table_entry[1], 0, 0}, // eth1
-+ {MAC_PORT2_PMAP, 1, 3, PORT2_NETDEV_INDEX, rx_port_base, tx_port_base, open_port2, close_port2, MAC_PORT2, my_vlan2_mac, &vlan_table_entry[2], &arl_table_entry[2], 0, 0} // eth2
-+ };
-+
-+#endif // CNS3XXX_PORT_BASE_MODE
-+
-+#ifdef CNS3XXX_NIC_MODE_8021Q
-+//#error "8021Q"
-+#define PORT0_PVID 1
-+#define PORT1_PVID 2
-+#define PORT2_PVID 9
-+#define CPU_PVID 5
-+
-+#define CONFIG_CNS3XXX_PORT_BASE
-+//#define CONFIG_CNS3XXX_VLAN_BASE
-+//#define CONFIG_HAVE_VLAN_TAG
-+
-+static VLANTableEntry cpu_vlan_table_entry = {0, 1, CPU_PVID, 0, 0, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan3_mac}; // for cpu
-+
-+static VLANTableEntry vlan_table_entry[] =
-+{
-+ // vlan_index; valid; vid; wan_side; etag_pmap; mb_pmap; *my_mac;C_PORT2_PMAP
-+ {1, 1, PORT0_PVID, 1, MAC_PORT0_PMAP|CPU_PORT_PMAP, MAC_PORT0_PMAP | CPU_PORT_PMAP, my_vlan0_mac},
-+ {2, 1, PORT1_PVID, 0, MAC_PORT1_PMAP|CPU_PORT_PMAP, MAC_PORT1_PMAP | CPU_PORT_PMAP, my_vlan1_mac},
-+ {3, 1, PORT2_PVID, 1, MAC_PORT2_PMAP|CPU_PORT_PMAP, MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan2_mac},
-+};
-+
-+static ARLTableEntry arl_table_entry[] =
-+{
-+ // vid; pmap; *mac; age_field; vlan_mac ; filter
-+ {PORT0_PVID, CPU_PORT_PMAP, my_vlan0_mac, 7, 1, 0},
-+ {PORT1_PVID, CPU_PORT_PMAP, my_vlan1_mac, 7, 1, 0},
-+ {PORT2_PVID, CPU_PORT_PMAP, my_vlan2_mac, 7, 1, 0},
-+};
-+
-+
-+// if used 8021Q, use PORT0_NETDEV_INDEX, don't use VID
-+static NetDevicePriv net_device_prive[]= {
-+ {MAC_PORT0_PMAP, 0, 1, PORT0_NETDEV_INDEX, rx_port_base, tx_port_base, open_port0, close_port0, MAC_PORT0, my_vlan0_mac, &vlan_table_entry[0], &arl_table_entry[0], 0, 0}, // eth0
-+ {MAC_PORT1_PMAP, 0, 0, PORT1_NETDEV_INDEX, rx_port_base, tx_port_base, open_port1, close_port1, MAC_PORT1, my_vlan1_mac, &vlan_table_entry[1], &arl_table_entry[1], 0, 0}, // eth1
-+ {MAC_PORT2_PMAP, 1, 3, PORT2_NETDEV_INDEX, rx_port_base, tx_port_base, open_port2, close_port2, MAC_PORT2, my_vlan2_mac, &vlan_table_entry[2], &arl_table_entry[2], 0, 0} // eth2
-+ };
-+#endif // CNS3XXX_NIC_MODE_8021Q
-+
-+#ifdef CNS3XXX_VLAN_BASE_MODE
-+//#error "vlan_base"
-+// vlan configuration
-+
-+#define PORT0_PVID 1
-+#define PORT1_PVID 2
-+#define PORT2_PVID 3
-+#define CPU_PVID 5
-+#define CONFIG_CNS3XXX_VLAN_BASE
-+#define CONFIG_HAVE_VLAN_TAG
-+
-+static VLANTableEntry cpu_vlan_table_entry = {0, 1, CPU_PVID, 0, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, MAC_PORT0_PMAP | MAC_PORT1_PMAP | MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan3_mac}; // for cpu
-+
-+static VLANTableEntry vlan_table_entry[] =
-+{
-+ // vlan_index; valid; vid; wan_side; etag_pmap; mb_pmap; *my_mac;
-+ {1, 1, PORT0_PVID, 0, MAC_PORT0_PMAP | CPU_PORT_PMAP, MAC_PORT0_PMAP | CPU_PORT_PMAP, my_vlan0_mac},
-+ {2, 1, PORT1_PVID, 0, MAC_PORT1_PMAP | CPU_PORT_PMAP, MAC_PORT1_PMAP | CPU_PORT_PMAP, my_vlan1_mac},
-+ {3, 1, PORT2_PVID, 1, MAC_PORT2_PMAP | CPU_PORT_PMAP, MAC_PORT2_PMAP | CPU_PORT_PMAP, my_vlan2_mac},
-+};
-+
-+static ARLTableEntry arl_table_entry[] =
-+{
-+ // vid; pmap; *mac; age_field; vlan_mac ; filter
-+ {PORT0_PVID, CPU_PORT_PMAP, my_vlan0_mac, 7, 1, 0},
-+ {PORT1_PVID, CPU_PORT_PMAP, my_vlan1_mac, 7, 1, 0},
-+ {PORT2_PVID, CPU_PORT_PMAP, my_vlan2_mac, 7, 1, 0},
-+};
-+
-+static NetDevicePriv net_device_prive[]= {
-+ /* pmap, is_wan, gid, vlan_tag or pvid, rx_func_ptr, tx_func_ptr, open_ptr, close_ptr, which port, mac, VLANTableEntry, ARLTableEntry, NICSetting, netdev name */
-+ {MAC_PORT0_PMAP, 0, 1, PORT0_PVID, rx_port_base, tx_vlan_base, open_port0, close_port0, MAC_PORT0, my_vlan0_mac, &vlan_table_entry[0], &arl_table_entry[0], 0, 0}, // eth0
-+ {MAC_PORT1_PMAP, 0, 0, PORT1_PVID, rx_port_base, tx_vlan_base, open_port1, close_port1, MAC_PORT1, my_vlan1_mac, &vlan_table_entry[1], &arl_table_entry[1], 0, 0}, // eth1
-+ {MAC_PORT2_PMAP, 1, 3, PORT2_PVID, rx_port_base, tx_vlan_base, open_port2, close_port2, MAC_PORT2, my_vlan2_mac, &vlan_table_entry[2], &arl_table_entry[2], 0, 0} // eth2
-+ };
-+#endif // CNS3XXX_VLAN_BASE_MODE
-+
-+#endif // CONFIG_VB
-+#endif // VB_H
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2076,6 +2076,8 @@ menuconfig NETDEV_1000
-
- if NETDEV_1000
-
-+source "drivers/net/cns3xxx/Kconfig"
-+
- config ACENIC
- tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
- depends on PCI
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -6,6 +6,11 @@ obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci
-
- obj-$(CONFIG_E1000) += e1000/
- obj-$(CONFIG_E1000E) += e1000e/
-+obj-$(CONFIG_CNS3XXX_GSW) += cns3xxx/
-+ifeq ($(CONFIG_CNS3XXX_GSW),m)
-+ obj-y += cns3xxx/cns3xxx_sppe_hook.o
-+endif
-+
- obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
- obj-$(CONFIG_IGB) += igb/
- obj-$(CONFIG_IGBVF) += igbvf/
---- /dev/null
-+++ b/include/linux/cns3xxx/sppe.h
-@@ -0,0 +1,1579 @@
-+/*
-+ * PROJECT CODE: CNS3XXX Smart Packet Processing Engine
-+ * MODULE NAME: sppe.h
-+ * DESCRIPTION:
-+ *
-+ * Change Log
-+ *
-+ * 1.0.0 25-Dec-2008
-+ * o
-+ *
-+ */
-+
-+#ifndef _SPPE_H_
-+#define _SPPE_H_
-+
-+#if defined(CONFIG_CNS3XXX_SPPE)
-+
-+
-+/* PPE Table Size Def. */
-+#define PPE_TABLE_SIZE_2K (0x0)
-+#define PPE_TABLE_SIZE_4K (0x1)
-+#define PPE_TABLE_SIZE_8K (0x2)
-+#define PPE_TABLE_SIZE_16K (0x3)
-+#define PPE_TABLE_SIZE_32K (0x4)
-+#define PPE_TABLE_SIZE_64K (0x5)
-+#define PPE_TABLE_SIZE_128K (0x6)
-+#define PPE_TABLE_SIZE_256K (0x7)
-+
-+typedef enum _sppe_cmd {
-+ SPPE_CMD_INIT = 0,
-+ SPPE_CMD_VERSION,
-+
-+ SPPE_CMD_ENABLE,
-+ SPPE_CMD_FIREWALL,
-+ SPPE_CMD_RULE_CHECK,
-+ SPPE_CMD_GRL_CHECK,
-+ SPPE_CMD_FLOW_CHECK,
-+ SPPE_CMD_RATE_LIMIT_EN,
-+ SPPE_CMD_POLICE_EN,
-+ SPPE_CMD_RLCFG,
-+ SPPE_CMD_FC, /* flow control */
-+ SPPE_CMD_MIRROR_TO_CPU,
-+
-+ SPPE_CMD_TCP_SNA_TH,
-+ SPPE_CMD_PRDA,
-+ SPPE_CMD_AGING,
-+ SPPE_CMD_MAX_LENGTH,
-+
-+ SPPE_CMD_LANIPV4,
-+ SPPE_CMD_WANIPV4,
-+
-+ SPPE_CMD_RULE_PPPOE_RELAY,
-+ SPPE_CMD_RULE_BRIDGE,
-+ SPPE_CMD_RULE_ACL,
-+ SPPE_CMD_RULE_ROUTE,
-+#if 0
-+ SPPE_CMD_RULE_VSERVER,
-+#else
-+ SPPE_CMD_RULE_SNAT,
-+ SPPE_CMD_RULE_DNAT,
-+#endif
-+ SPPE_CMD_RULE_GRL,
-+
-+ SPPE_CMD_ARP,
-+ SPPE_CMD_ARL,
-+ SPPE_CMD_PPPOE_SID,
-+
-+ SPPE_CMD_FLOW_BRIDGE_IPV4,
-+ SPPE_CMD_FLOW_BRIDGE_IPV6,
-+ SPPE_CMD_FLOW_ROUTE_IPV4,
-+ SPPE_CMD_FLOW_ROUTE_IPV6,
-+ SPPE_CMD_FLOW_NAT_IPV4,
-+ SPPE_CMD_FLOW_NAT_IPV6,
-+ //SPPE_CMD_FLOW_TWICE_NAT,
-+ SPPE_CMD_FLOW_MCAST_IPV4,
-+ SPPE_CMD_FLOW_MCAST_IPV6,
-+ SPPE_CMD_FLOW_BRIDGE_L2,
-+
-+ SPPE_CMD_CHGDSCP,
-+ SPPE_CMD_CHGPRI,
-+ SPPE_CMD_RL_FLOW,
-+ SPPE_CMD_RL_RULE,
-+
-+ SPPE_CMD_DEBUG,
-+ SPPE_CMD_REG,
-+ SPPE_CMD_SRAM,
-+ SPPE_CMD_DUMP,
-+
-+ /* accounting group and drop packet count */
-+ SPPE_CMD_ACCOUNTING_GROUP,
-+ SPPE_CMD_DROP_IPCS_ERR,
-+ SPPE_CMD_DROP_RATE_LIMIT,
-+ SPPE_CMD_DROP_OTHERS,
-+
-+ SPPE_CMD_PCI_FP_DEV,
-+
-+} SPPE_CMD;
-+
-+typedef enum _sppe_op {
-+ SPPE_OP_GET = 0,
-+ SPPE_OP_SET,
-+ SPPE_OP_DELETE,
-+ SPPE_OP_DELETE_OUTDATED, /* flow only */
-+ SPPE_OP_UPDATE_COUNTER, /* ACL rule only */
-+ SPPE_OP_CLEAN,
-+ SPPE_OP_UNKNOWN
-+} SPPE_OP;
-+
-+typedef enum _sppe_boolean {
-+ SPPE_BOOL_FALSE = 0,
-+ SPPE_BOOL_TRUE = 1
-+} SPPE_BOOL;
-+
-+
-+typedef enum _sppe_result {
-+ SPPE_RESULT_SUCCESS = 0,
-+ SPPE_RESULT_FAIL,
-+ SPPE_RESULT_UNSUPPORT_CMD,
-+ SPPE_RESULT_UNSUPPORT_OP,
-+ SPPE_RESULT_INVALID_INDEX,
-+ SPPE_RESULT_INVALID_TYPE,
-+ SPPE_RESULT_FLOW_NOT_FOUND,
-+} SPPE_RESULT;
-+
-+typedef enum _sppe_prot {
-+ SPPE_PROT_UDP = 0,
-+ SPPE_PROT_TCP = 1,
-+ SPPE_PROT_PPTP_GRE = 2,
-+ SPPE_PROT_OTHERS = 3,
-+} SPPE_PROT;
-+
-+
-+typedef enum _sppe_l2_select {
-+ SPPE_L2S_ARP_TABLE = 0,
-+ SPPE_L2S_POLICY_ROUTE = 1,
-+ SPPE_L2S_IN_FLOW = 2,
-+ SPPE_L2S_RESERVED = 3,
-+} SPPE_L2_SELECT;
-+
-+typedef enum _sppe_dump_type {
-+ SPPE_DUMP_TYPE_FLOW = 0,
-+ SPPE_DUMP_TYPE_ARP,
-+ SPPE_DUMP_TYPE_RULE
-+} SPPE_DUMP_TYPE;
-+
-+/* Data Structure */
-+typedef struct _sppe_pppoe_relay {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int valid:1;
-+ unsigned int unused:31;
-+#else
-+ unsigned int unused:31;
-+ unsigned int valid:1;
-+#endif
-+ unsigned short lsid; /* PPPoE session ID in LAN side */
-+ unsigned short wsid; /* PPPoE session ID in WAN side */
-+ unsigned char lmac[6]; /* MAC address of PPPoE client */
-+ unsigned char wmac[6]; /* MAC address of PPPoE server */
-+} SPPE_PPPOE_RELAY;
-+
-+typedef struct _sppe_bridge {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int valid:1;
-+ unsigned int wan:1;
-+ unsigned int ppp:1; /* enable PPPoE sessoion ID comparison*/
-+ unsigned int psidx:4; /* PPPoE session ID index */
-+ unsigned int kv:1;
-+ unsigned int sws:1;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int fp:1; /* force VLAN priority */
-+ unsigned int pri:3;
-+ unsigned int ag:2;
-+ unsigned int unused:15;
-+#else
-+ unsigned int unused:15;
-+ unsigned int ag:2;
-+ unsigned int pri:3;
-+ unsigned int fp:1; /* force VLAN priority */
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int sws:1;
-+ unsigned int kv:1;
-+ unsigned int psidx:4; /* PPPoE session ID index */
-+ unsigned int ppp:1; /* enable PPPoE sessoion ID comparison*/
-+ unsigned int wan:1;
-+ unsigned int valid:1;
-+#endif
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int svid:12;
-+ unsigned int cvid:12;
-+ unsigned int loc:8;
-+#else
-+ unsigned int loc:8;
-+ unsigned int cvid:12;
-+ unsigned int svid:12;
-+#endif
-+
-+ unsigned char smac[6]; /* source MAC address */
-+ unsigned char dmac[6]; /* destination MAC address */
-+ unsigned int pkt_cnt;
-+} SPPE_BRIDGE;
-+
-+typedef struct _sppe_acl {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int valid:1;
-+ unsigned int ipv6:1;
-+ unsigned int wan:1;
-+ unsigned int tcp:1;
-+ unsigned int udp:1;
-+ unsigned int to:4;
-+ unsigned int from:4;
-+ unsigned int rr:4;
-+ unsigned int kv:1;
-+ unsigned int sws:1;
-+ unsigned int loc:8;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int unused:3;
-+#else
-+ unsigned int unused:3;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int loc:8;
-+ unsigned int sws:1;
-+ unsigned int kv:1;
-+ unsigned int rr:4;
-+ unsigned int from:4;
-+ unsigned int to:4;
-+ unsigned int udp:1;
-+ unsigned int tcp:1;
-+ unsigned int wan:1;
-+ unsigned int ipv6:1;
-+ unsigned int valid:1;
-+#endif
-+
-+ unsigned int sip[4];
-+ unsigned int dip[4];
-+ unsigned short sip_mask;
-+ unsigned short dip_mask;
-+
-+ unsigned short sport_start;
-+ unsigned short sport_end;
-+ unsigned short dport_start;
-+ unsigned short dport_end;
-+ unsigned int pkt_cnt;
-+} SPPE_ACL;
-+
-+typedef struct _sppe_route {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int valid:1;
-+ unsigned int ipv6:1;
-+ unsigned int wan:1;
-+ unsigned int rd:1; /* replace dscp */
-+ unsigned int dscp:6;
-+ unsigned int pr:1; /* policy route */
-+ unsigned int prs:2; /* policy route select */
-+ unsigned int kv:1;
-+ unsigned int sws:1;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int fp:1; /* force VLAN priority */
-+ unsigned int pri:3;
-+ unsigned int pd:1;
-+ unsigned int pi:1;
-+ unsigned int psidx:4;
-+ unsigned int ag:2;
-+ unsigned int unused:3;
-+#else
-+ unsigned int unused:3;
-+ unsigned int ag:2;
-+ unsigned int psidx:4;
-+ unsigned int pi:1;
-+ unsigned int pd:1;
-+ unsigned int pri:3;
-+ unsigned int fp:1; /* force VLAN priority */
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int sws:1;
-+ unsigned int kv:1;
-+ unsigned int prs:2; /* policy route select */
-+ unsigned int pr:1; /* policy route */
-+ unsigned int dscp:6;
-+ unsigned int rd:1; /* replace dscp */
-+ unsigned int wan:1;
-+ unsigned int ipv6:1;
-+ unsigned int valid:1;
-+#endif
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int unused_1:24;
-+ unsigned int loc:8;
-+#else
-+ unsigned int loc:8;
-+ unsigned int unused_1:24;
-+#endif
-+
-+ unsigned int dip[4];
-+ unsigned int sip[4];
-+ unsigned short dip_mask;
-+ unsigned short sip_mask;
-+ unsigned int pkt_cnt;
-+} SPPE_ROUTE;
-+
-+#if 0
-+typedef struct _sppe_vserver {
-+ unsigned int valid:1;
-+ unsigned int tcp:1;
-+ unsigned int udp:1;
-+ unsigned int dscp_lan:6;
-+ unsigned int dscp_wan:6;
-+ unsigned int pri_lan:3;
-+ unsigned int pri_wan:3;
-+ unsigned int unused:11;
-+
-+ unsigned int wanip;
-+ unsigned int lanip;
-+ unsigned short port_start;
-+ unsigned short port_end;
-+ unsigned int pkt_cnt;
-+} SPPE_VSERVER;
-+#else
-+typedef struct _sppe_snat {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int valid:1;
-+ unsigned int tcp:1;
-+ unsigned int udp:1;
-+ unsigned int rd:1;
-+ unsigned int dscp:6;
-+ unsigned int fp:1;
-+ unsigned int pri:3;
-+ unsigned int kv:1;
-+ unsigned int sws:1;
-+ unsigned int max_len:2;
-+ unsigned int pd:1;
-+ unsigned int pi:1;
-+ unsigned int psidx:4;
-+ unsigned int pr:1; /* policy route */
-+ unsigned int prs:2; /* policy route select */
-+ unsigned int ag:2;
-+ unsigned int unused:3;
-+#else
-+ unsigned int unused:3;
-+ unsigned int ag:2;
-+ unsigned int prs:2; /* policy route select */
-+ unsigned int pr:1; /* policy route */
-+ unsigned int psidx:4;
-+ unsigned int pi:1;
-+ unsigned int pd:1;
-+ unsigned int max_len:2;
-+ unsigned int sws:1;
-+ unsigned int kv:1;
-+ unsigned int pri:3;
-+ unsigned int fp:1;
-+ unsigned int dscp:6;
-+ unsigned int rd:1;
-+ unsigned int udp:1;
-+ unsigned int tcp:1;
-+ unsigned int valid:1;
-+#endif
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int unused_1:24;
-+ unsigned int loc:8;
-+#else
-+ unsigned int loc:8;
-+ unsigned int unused_1:24;
-+#endif
-+
-+ unsigned int wanip;
-+ unsigned int lanip;
-+ unsigned short port_start;
-+ unsigned short port_end;
-+ unsigned int pkt_cnt;
-+} SPPE_SNAT;
-+
-+typedef struct _sppe_dnat {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int valid:1;
-+ unsigned int tcp:1;
-+ unsigned int udp:1;
-+ unsigned int rd:1;
-+ unsigned int dscp:6;
-+ unsigned int fp:1;
-+ unsigned int pri:3;
-+ unsigned int kv:1;
-+ unsigned int sws:1;
-+ unsigned int max_len:2;
-+ unsigned int pd:1;
-+ unsigned int pi:1;
-+ unsigned int psidx:4;
-+ unsigned int pr:1; /* policy route */
-+ unsigned int prs:2; /* policy route select */
-+ unsigned int ag:2;
-+ unsigned int unused:3;
-+#else
-+ unsigned int unused:3;
-+ unsigned int ag:2;
-+ unsigned int prs:2; /* policy route select */
-+ unsigned int pr:1; /* policy route */
-+ unsigned int psidx:4;
-+ unsigned int pi:1;
-+ unsigned int pd:1;
-+ unsigned int max_len:2;
-+ unsigned int sws:1;
-+ unsigned int kv:1;
-+ unsigned int pri:3;
-+ unsigned int fp:1;
-+ unsigned int dscp:6;
-+ unsigned int rd:1;
-+ unsigned int udp:1;
-+ unsigned int tcp:1;
-+ unsigned int valid:1;
-+#endif
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int unused_1:24;
-+ unsigned int loc:8;
-+#else
-+ unsigned int loc:8;
-+ unsigned int unused_1:24;
-+#endif
-+
-+ unsigned int wanip;
-+ unsigned int lanip;
-+ unsigned short port_start;
-+ unsigned short port_end;
-+ unsigned int pkt_cnt;
-+} SPPE_DNAT;
-+#endif
-+typedef struct _sppe_limit {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int drop_red:1;
-+ unsigned int pass_green:1;
-+ unsigned int force_color:1;
-+ unsigned int color_select:2;
-+ unsigned int time_stamp:21;
-+ unsigned int reserved:6;
-+#else
-+ unsigned int reserved:6;
-+ unsigned int time_stamp:21;
-+ unsigned int color_select:2;
-+ unsigned int force_color:1;
-+ unsigned int pass_green:1;
-+ unsigned int drop_red:1;
-+#endif
-+ unsigned short min_rate;
-+ unsigned short max_rate;
-+} SPPE_LIMIT;
-+
-+typedef struct _sppe_global_rate_limit {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int valid:1;
-+ unsigned int wan:1;
-+ unsigned int ipv6:1;
-+ unsigned int tcp:1;
-+ unsigned int udp:1;
-+ unsigned int unused:17;
-+#else
-+ unsigned int unused:17;
-+ unsigned int udp:1;
-+ unsigned int tcp:1;
-+ unsigned int ipv6:1;
-+ unsigned int wan:1;
-+ unsigned int valid:1;
-+#endif
-+
-+ unsigned int sip[4];
-+ unsigned int dip[4];
-+ unsigned short sip_mask;
-+ unsigned short dip_mask;
-+ unsigned short sport_start;
-+ unsigned short sport_end;
-+ unsigned short dport_start;
-+ unsigned short dport_end;
-+ SPPE_LIMIT limit;
-+} SPPE_GLOBAL_RATE_LIMIT;
-+
-+/*
-+ * SPPE_CMD_FLOW_BRIDGE_IPV4
-+ * type = 1 , as = 3
-+ */
-+typedef struct _sppe_flow_bridge_ipv4 {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int fw:1;
-+ unsigned int s:1;
-+ unsigned int sws:1;
-+ unsigned int ag:2;
-+ unsigned int rl:1;
-+ unsigned int l4_prot:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int prs:2;
-+ unsigned int kv:1;
-+ unsigned int fp:1;
-+ unsigned int pri:3;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int reserved:13;
-+#else
-+ unsigned int reserved:13;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int pri:3;
-+ unsigned int fp:1;
-+ unsigned int kv:1;
-+ unsigned int prs:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int l4_prot:2;
-+ unsigned int rl:1;
-+ unsigned int ag:2;
-+ unsigned int sws:1;
-+ unsigned int s:1;
-+ unsigned int fw:1;
-+#endif
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int unused:16;
-+ unsigned int mac4732:16;
-+#else
-+ unsigned int mac4732:16;
-+ unsigned int unused:16;
-+#endif
-+
-+ unsigned int mac3100;
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int lp:1;
-+ unsigned int fr:1;
-+ unsigned int pm:4;
-+ unsigned int sv:1;
-+ unsigned int svid:12;
-+ unsigned int cv:1;
-+ unsigned int cvid:12;
-+#else
-+ unsigned int cvid:12;
-+ unsigned int cv:1;
-+ unsigned int svid:12;
-+ unsigned int sv:1;
-+ unsigned int pm:4;
-+ unsigned int fr:1;
-+ unsigned int lp:1;
-+#endif
-+ unsigned int sip;
-+ unsigned int dip;
-+
-+ union {
-+ struct {
-+ unsigned short src;
-+ unsigned short dst;
-+ } port;
-+ struct {
-+ unsigned short call_id;
-+ } gre;
-+ struct {
-+ unsigned char protocol;
-+ } others;
-+ } l4;
-+
-+ SPPE_LIMIT limit;
-+ unsigned int pkt_cnt;
-+} SPPE_FLOW_BRIDGE_IPV4;
-+
-+/*
-+ * SPPE_CMD_FLOW_BRIDGE_IPV6
-+ * type = 2 , as = 3
-+ */
-+typedef struct _sppe_flow_bridge_ipv6 {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int fw:1;
-+ unsigned int s:1;
-+ unsigned int sws:1;
-+ unsigned int ag:2;
-+ unsigned int rl:1;
-+ unsigned int l4_prot:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int prs:2;
-+ unsigned int kv:1;
-+ unsigned int fp:1;
-+ unsigned int pri:3;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int reserved:13;
-+#else
-+ unsigned int reserved:13;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int pri:3;
-+ unsigned int fp:1;
-+ unsigned int kv:1;
-+ unsigned int prs:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int l4_prot:2;
-+ unsigned int rl:1;
-+ unsigned int ag:2;
-+ unsigned int sws:1;
-+ unsigned int s:1;
-+ unsigned int fw:1;
-+#endif
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int unused:16;
-+ unsigned int mac4732:16;
-+#else
-+ unsigned int mac4732:16;
-+ unsigned int unused:16;
-+#endif
-+
-+ unsigned int mac3100;
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int lp:1;
-+ unsigned int fr:1;
-+ unsigned int pm:4;
-+ unsigned int sv:1;
-+ unsigned int svid:12;
-+ unsigned int cv:1;
-+ unsigned int cvid:12;
-+#else
-+ unsigned int cvid:12;
-+ unsigned int cv:1;
-+ unsigned int svid:12;
-+ unsigned int sv:1;
-+ unsigned int pm:4;
-+ unsigned int fr:1;
-+ unsigned int lp:1;
-+#endif
-+ unsigned int sip[4];
-+ unsigned int dip[4];
-+ union {
-+ struct {
-+ unsigned short src;
-+ unsigned short dst;
-+ } port;
-+ struct {
-+ unsigned short call_id;
-+ } gre;
-+ struct {
-+ unsigned char protocol;
-+ } others;
-+ } l4;
-+ SPPE_LIMIT limit;
-+ unsigned int pkt_cnt;
-+} SPPE_FLOW_BRIDGE_IPV6;
-+
-+/*
-+ * SPPE_CMD_FLOW_ROUTE_IPV4
-+ * type = 1, as = 0
-+ */
-+typedef struct _sppe_flow_route_ipv4 {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int fw:1;
-+ unsigned int s:1;
-+ unsigned int sws:1;
-+ unsigned int ag:2;
-+ unsigned int rl:1;
-+ unsigned int l4_prot:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int prs:2;
-+ unsigned int kv:1;
-+ unsigned int rd:1;
-+ unsigned int dscp:6;
-+ unsigned int fp:1;
-+ unsigned int pri:3;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int pd:1;
-+ unsigned int pi:1;
-+ unsigned int psidx:4;
-+#else
-+ unsigned int psidx:4;
-+ unsigned int pi:1;
-+ unsigned int pd:1;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int pri:3;
-+ unsigned int fp:1;
-+ unsigned int dscp:6;
-+ unsigned int rd:1;
-+ unsigned int kv:1;
-+ unsigned int prs:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int l4_prot:2;
-+ unsigned int rl:1;
-+ unsigned int ag:2;
-+ unsigned int sws:1;
-+ unsigned int s:1;
-+ unsigned int fw:1;
-+#endif
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int unused:16;
-+ unsigned int mac4732:16;
-+#else
-+ unsigned int mac4732:16;
-+ unsigned int unused:16;
-+#endif
-+ unsigned int mac3100;
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int lp:1;
-+ unsigned int fr:1;
-+ unsigned int pm:4;
-+ unsigned int sv:1;
-+ unsigned int svid:12;
-+ unsigned int cv:1;
-+ unsigned int cvid:12;
-+#else
-+ unsigned int cvid:12;
-+ unsigned int cv:1;
-+ unsigned int svid:12;
-+ unsigned int sv:1;
-+ unsigned int pm:4;
-+ unsigned int fr:1;
-+ unsigned int lp:1;
-+#endif
-+
-+ unsigned int sip;
-+ unsigned int dip;
-+ union {
-+ struct {
-+ unsigned short src;
-+ unsigned short dst;
-+ } port;
-+ struct {
-+ unsigned short call_id;
-+ } gre;
-+ struct {
-+ unsigned char protocol;
-+ } others;
-+ } l4;
-+ SPPE_LIMIT limit;
-+ unsigned int pkt_cnt;
-+} SPPE_FLOW_ROUTE_IPV4;
-+
-+/*
-+ * SPPE_CMD_FLOW_ROUTE_IPV6
-+ * type = 2, as = 0
-+ */
-+typedef struct _sppe_flow_route_ipv6 {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int fw:1;
-+ unsigned int s:1;
-+ unsigned int sws:1;
-+ unsigned int ag:2;
-+ unsigned int rl:1;
-+ unsigned int l4_prot:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int prs:2;
-+ unsigned int kv:1;
-+ unsigned int rd:1;
-+ unsigned int dscp:6;
-+ unsigned int fp:1;
-+ unsigned int pri:3;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int pd:1;
-+ unsigned int pi:1;
-+ unsigned int psidx:4;
-+#else
-+ unsigned int psidx:4;
-+ unsigned int pi:1;
-+ unsigned int pd:1;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int pri:3;
-+ unsigned int fp:1;
-+ unsigned int dscp:6;
-+ unsigned int rd:1;
-+ unsigned int kv:1;
-+ unsigned int prs:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int l4_prot:2;
-+ unsigned int rl:1;
-+ unsigned int ag:2;
-+ unsigned int sws:1;
-+ unsigned int s:1;
-+ unsigned int fw:1;
-+#endif
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int unused:16;
-+ unsigned int mac4732:16;
-+#else
-+ unsigned int mac4732:16;
-+ unsigned int unused:16;
-+#endif
-+ unsigned int mac3100;
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int lp:1;
-+ unsigned int fr:1;
-+ unsigned int pm:4;
-+ unsigned int sv:1;
-+ unsigned int svid:12;
-+ unsigned int cv:1;
-+ unsigned int cvid:12;
-+#else
-+ unsigned int cvid:12;
-+ unsigned int cv:1;
-+ unsigned int svid:12;
-+ unsigned int sv:1;
-+ unsigned int pm:4;
-+ unsigned int fr:1;
-+ unsigned int lp:1;
-+#endif
-+ unsigned int sip[4];
-+ unsigned int dip[4];
-+ union {
-+ struct {
-+ unsigned short src;
-+ unsigned short dst;
-+ } port;
-+ struct {
-+ unsigned short call_id;
-+ } gre;
-+ struct {
-+ unsigned char protocol;
-+ } others;
-+ } l4;
-+ SPPE_LIMIT limit;
-+ unsigned int pkt_cnt;
-+} SPPE_FLOW_ROUTE_IPV6;
-+
-+/*
-+ * SPPE_CMD_FLOW_NAT_IPV4
-+ * type = 0, as = 1
-+ */
-+typedef struct _sppe_flow_nat_ipv4 {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int fw:1;
-+ unsigned int s:1;
-+ unsigned int sws:1;
-+ unsigned int ag:2;
-+ unsigned int rl:1;
-+ unsigned int l4_prot:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int prs:2;
-+ unsigned int kv:1;
-+ unsigned int rd:1;
-+ unsigned int dscp:6;
-+ unsigned int fp:1;
-+ unsigned int pri:3;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int pd:1;
-+ unsigned int pi:1;
-+ unsigned int psidx:4;
-+#else
-+ unsigned int psidx:4;
-+ unsigned int pi:1;
-+ unsigned int pd:1;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int pri:3;
-+ unsigned int fp:1;
-+ unsigned int dscp:6;
-+ unsigned int rd:1;
-+ unsigned int kv:1;
-+ unsigned int prs:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int l4_prot:2;
-+ unsigned int rl:1;
-+ unsigned int ag:2;
-+ unsigned int sws:1;
-+ unsigned int s:1;
-+ unsigned int fw:1;
-+#endif
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int unused:16;
-+ unsigned int mac4732:16;
-+#else
-+ unsigned int mac4732:16;
-+ unsigned int unused:16;
-+#endif
-+
-+ unsigned int mac3100;
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int lp:1;
-+ unsigned int fr:1;
-+ unsigned int pm:4;
-+ unsigned int sv:1;
-+ unsigned int svid:12;
-+ unsigned int cv:1;
-+ unsigned int cvid:12;
-+#else
-+ unsigned int cvid:12;
-+ unsigned int cv:1;
-+ unsigned int svid:12;
-+ unsigned int sv:1;
-+ unsigned int pm:4;
-+ unsigned int fr:1;
-+ unsigned int lp:1;
-+#endif
-+
-+ unsigned int sip;
-+ unsigned int dip;
-+ union {
-+ struct {
-+ unsigned short src;
-+ unsigned short dst;
-+ } port;
-+ struct {
-+ unsigned short call_id;
-+ unsigned short nat_call_id;
-+ } gre;
-+ struct {
-+ unsigned char protocol;
-+ } others;
-+ } l4;
-+ unsigned int nat_ip;
-+ unsigned short nat_port;
-+ SPPE_LIMIT limit;
-+ unsigned int pkt_cnt;
-+} SPPE_FLOW_NAT_IPV4;
-+
-+/*
-+ * SPPE_CMD_FLOW_NAT_IPV6
-+ * type = 1, as = 1
-+ */
-+typedef struct _sppe_flow_nat_ipv6 {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int fw:1;
-+ unsigned int s:1;
-+ unsigned int sws:1;
-+ unsigned int ag:2;
-+ unsigned int rl:1;
-+ unsigned int l4_prot:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int prs:2;
-+ unsigned int kv:1;
-+ unsigned int rd:1;
-+ unsigned int dscp:6;
-+ unsigned int fp:1;
-+ unsigned int pri:3;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int pd:1;
-+ unsigned int pi:1;
-+ unsigned int psidx:4;
-+#else
-+ unsigned int psidx:4;
-+ unsigned int pi:1;
-+ unsigned int pd:1;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int pri:3;
-+ unsigned int fp:1;
-+ unsigned int dscp:6;
-+ unsigned int rd:1;
-+ unsigned int kv:1;
-+ unsigned int prs:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int l4_prot:2;
-+ unsigned int rl:1;
-+ unsigned int ag:2;
-+ unsigned int sws:1;
-+ unsigned int s:1;
-+ unsigned int fw:1;
-+#endif
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int unused:16;
-+ unsigned int mac4732:16;
-+#else
-+ unsigned int mac4732:16;
-+ unsigned int unused:16;
-+#endif
-+ unsigned int mac3100;
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int lp:1;
-+ unsigned int fr:1;
-+ unsigned int pm:4;
-+ unsigned int sv:1;
-+ unsigned int svid:12;
-+ unsigned int cv:1;
-+ unsigned int cvid:12;
-+#else
-+ unsigned int cvid:12;
-+ unsigned int cv:1;
-+ unsigned int svid:12;
-+ unsigned int sv:1;
-+ unsigned int pm:4;
-+ unsigned int fr:1;
-+ unsigned int lp:1;
-+#endif
-+ unsigned int sip[4];
-+ unsigned int dip[4];
-+ union {
-+ struct {
-+ unsigned short src;
-+ unsigned short dst;
-+ } port;
-+ struct {
-+ unsigned short call_id;
-+ unsigned short nat_call_id;
-+ } gre;
-+ struct {
-+ unsigned char protocol;
-+ } others;
-+ } l4;
-+ unsigned int nat_ip[4];
-+ unsigned short nat_port;
-+ SPPE_LIMIT limit;
-+ unsigned int pkt_cnt;
-+} SPPE_FLOW_NAT_IPV6;
-+
-+/*
-+ * SPPE_CMD_FLOW_TWICE_NAT
-+ * type = 0, as = 2
-+ */
-+typedef struct _sppe_flow_twice_nat {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int fw:1;
-+ unsigned int s:1;
-+ unsigned int sws:1;
-+ unsigned int ag:2;
-+ unsigned int rl:1;
-+ unsigned int l4_prot:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int prs:2;
-+ unsigned int kv:1;
-+ unsigned int rd:1;
-+ unsigned int dscp:6;
-+ unsigned int fp:1;
-+ unsigned int pri:3;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int psidx:4;
-+ unsigned int reserved:2;
-+#else
-+ unsigned int reserved:2;
-+ unsigned int psidx:4;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int pri:3;
-+ unsigned int fp:1;
-+ unsigned int dscp:6;
-+ unsigned int rd:1;
-+ unsigned int kv:1;
-+ unsigned int prs:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int l4_prot:2;
-+ unsigned int rl:1;
-+ unsigned int ag:2;
-+ unsigned int sws:1;
-+ unsigned int s:1;
-+ unsigned int fw:1;
-+#endif
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int unused:16;
-+ unsigned int mac4732:16;
-+#else
-+ unsigned int mac4732:16;
-+ unsigned int unused:16;
-+#endif
-+ unsigned int mac3100;
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int lp:1;
-+ unsigned int fr:1;
-+ unsigned int pm:4;
-+ unsigned int sv:1;
-+ unsigned int svid:12;
-+ unsigned int cv:1;
-+ unsigned int cvid:12;
-+#else
-+ unsigned int cvid:12;
-+ unsigned int cv:1;
-+ unsigned int svid:12;
-+ unsigned int sv:1;
-+ unsigned int pm:4;
-+ unsigned int fr:1;
-+ unsigned int lp:1;
-+#endif
-+ unsigned int sip;
-+ unsigned int dip;
-+ unsigned short sport;
-+ unsigned short dport;
-+ unsigned int natsip;
-+ unsigned int natdip;
-+ unsigned short natsport;
-+ unsigned short natdport;
-+ SPPE_LIMIT limit;
-+ unsigned int pkt_cnt;
-+} SPPE_FLOW_TWICE_NAT;
-+
-+/*
-+ * SPPE_CMD_FLOW_MULTICAST_IPV4
-+ * type = 0, as = 0 or 3
-+ */
-+typedef struct _sppe_flow_multicast_ipv4 {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int fw:1;
-+ unsigned int s:1;
-+ unsigned int sws:1;
-+ unsigned int ag:2;
-+ unsigned int rl:1;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int prs:2;
-+ unsigned int kv:1;
-+ unsigned int rd:1;
-+ unsigned int dscp:6;
-+ unsigned int fp:1;
-+ unsigned int pri:3;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int bridge:1;
-+ unsigned int reserved:7;
-+#else
-+ unsigned int reserved:7;
-+ unsigned int bridge:1;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int pri:3;
-+ unsigned int fp:1;
-+ unsigned int dscp:6;
-+ unsigned int rd:1;
-+ unsigned int kv:1;
-+ unsigned int prs:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int rl:1;
-+ unsigned int ag:2;
-+ unsigned int sws:1;
-+ unsigned int s:1;
-+ unsigned int fw:1;
-+#endif
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int unused:16;
-+ unsigned int mac4732:16;
-+#else
-+ unsigned int mac4732:16;
-+ unsigned int unused:16;
-+#endif
-+ unsigned int mac3100;
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int lp:1;
-+ unsigned int fr:1;
-+ unsigned int pm:4;
-+ unsigned int sv:1;
-+ unsigned int svid:12;
-+ unsigned int cv:1;
-+ unsigned int cvid:12;
-+#else
-+ unsigned int cvid:12;
-+ unsigned int cv:1;
-+ unsigned int svid:12;
-+ unsigned int sv:1;
-+ unsigned int pm:4;
-+ unsigned int fr:1;
-+ unsigned int lp:1;
-+#endif
-+
-+ unsigned int sip;
-+ unsigned int dip;
-+ SPPE_LIMIT limit;
-+ unsigned int pkt_cnt;
-+} SPPE_FLOW_MCAST_IPV4;
-+
-+/*
-+ * SPPE_CMD_FLOW_MULTICAST_IPV6
-+ * type = 1, as = 0 or 3
-+ */
-+typedef struct _sppe_flow_multicast_ipv6 {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int fw:1;
-+ unsigned int s:1;
-+ unsigned int sws:1;
-+ unsigned int ag:2;
-+ unsigned int rl:1;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int prs:2;
-+ unsigned int kv:1;
-+ unsigned int rd:1;
-+ unsigned int dscp:6;
-+ unsigned int fp:1;
-+ unsigned int pri:3;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int bridge:1;
-+ unsigned int reserved:7;
-+#else
-+ unsigned int reserved:7;
-+ unsigned int bridge:1;
-+ unsigned int max_len:2; /* Max. length select */
-+ unsigned int pri:3;
-+ unsigned int fp:1;
-+ unsigned int dscp:6;
-+ unsigned int rd:1;
-+ unsigned int kv:1;
-+ unsigned int prs:2;
-+ unsigned int l2s:2; /* L2 select */
-+ unsigned int rl:1;
-+ unsigned int ag:2;
-+ unsigned int sws:1;
-+ unsigned int s:1;
-+ unsigned int fw:1;
-+#endif
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int unused:16;
-+ unsigned int mac4732:16;
-+#else
-+ unsigned int mac4732:16;
-+ unsigned int unused:16;
-+#endif
-+ unsigned int mac3100;
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int lp:1;
-+ unsigned int fr:1;
-+ unsigned int pm:4;
-+ unsigned int sv:1;
-+ unsigned int svid:12;
-+ unsigned int cv:1;
-+ unsigned int cvid:12;
-+#else
-+ unsigned int cvid:12;
-+ unsigned int cv:1;
-+ unsigned int svid:12;
-+ unsigned int sv:1;
-+ unsigned int pm:4;
-+ unsigned int fr:1;
-+ unsigned int lp:1;
-+#endif
-+
-+ unsigned int sip[4];
-+ unsigned int dip[4];
-+ SPPE_LIMIT limit;
-+ unsigned int pkt_cnt;
-+} SPPE_FLOW_MCAST_IPV6;
-+
-+/*
-+ * SPPE_CMD_FLOW_LAYER_TWO
-+ * type = 2
-+ */
-+typedef struct _sppe_flow_bridge_l2 {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int fw:1;
-+ unsigned int s:1;
-+ unsigned int sws:1;
-+ unsigned int ag:2;
-+ unsigned int rl:1;
-+ unsigned int l2_prot:2;
-+ unsigned int kv:1;
-+ unsigned int fp:1;
-+ unsigned int pri:3;
-+ unsigned int psidx:4;
-+ unsigned int reserved:15;
-+#else
-+ unsigned int reserved:15;
-+ unsigned int psidx:4;
-+ unsigned int pri:3;
-+ unsigned int fp:1;
-+ unsigned int kv:1;
-+ unsigned int l2_prot:2;
-+ unsigned int rl:1;
-+ unsigned int ag:2;
-+ unsigned int sws:1;
-+ unsigned int s:1;
-+ unsigned int fw:1;
-+#endif
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int lp:1;
-+ unsigned int fr:1;
-+ unsigned int pm:4;
-+ unsigned int sv:1;
-+ unsigned int svid:12;
-+ unsigned int cv:1;
-+ unsigned int cvid:12;
-+#else
-+ unsigned int cvid:12;
-+ unsigned int cv:1;
-+ unsigned int svid:12;
-+ unsigned int sv:1;
-+ unsigned int pm:4;
-+ unsigned int fr:1;
-+ unsigned int lp:1;
-+#endif
-+
-+ unsigned short smac[3];
-+ unsigned short dmac[3];
-+
-+ SPPE_LIMIT limit;
-+ unsigned int pkt_cnt;
-+} SPPE_FLOW_BRIDGE_L2;
-+
-+typedef struct _sppe_arl {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int vid:12;
-+ unsigned int pmap:5;
-+ unsigned int age:3;
-+ unsigned int mymac:1;
-+ unsigned int filter:1;
-+ unsigned int reserved:10;
-+#else
-+ unsigned int reserved:10;
-+ unsigned int filter:1;
-+ unsigned int mymac:1;
-+ unsigned int age:3;
-+ unsigned int pmap:5;
-+ unsigned int vid:12;
-+#endif
-+ unsigned char mac[6];
-+} SPPE_ARL;
-+
-+typedef struct _sppe_init {
-+ unsigned int flow_pre_match_paddr;
-+ unsigned int flow_pre_match_vaddr;
-+ unsigned int flow_body_paddr;
-+ unsigned int flow_body_vaddr;
-+ unsigned int flow_ext_paddr;
-+ unsigned int flow_ext_vaddr;
-+ unsigned int flow_size;
-+ unsigned int arp_pre_match_paddr;
-+ unsigned int arp_pre_match_vaddr;
-+ unsigned int arp_body_paddr;
-+ unsigned int arp_body_vaddr;
-+ unsigned int arp_size;
-+ unsigned int ipv6_napt;
-+} SPPE_INIT;
-+
-+typedef struct _sppe_param_t {
-+ SPPE_CMD cmd;
-+ SPPE_OP op;
-+
-+ union {
-+ struct {
-+ unsigned char major;
-+ unsigned char minor;
-+ unsigned char very_minor;
-+ unsigned char pre;
-+ } sppe_version;
-+
-+ SPPE_BOOL sppe_enable;
-+ unsigned int sppe_lanip;
-+
-+ struct {
-+ unsigned int index;
-+ unsigned int ip;
-+ unsigned int session_id;
-+ } sppe_wanip;
-+
-+ struct {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int index:2;
-+ unsigned int to:4;
-+ unsigned int sv:1;
-+ unsigned int stag_vid:12;
-+ unsigned int cv:1;
-+ unsigned int ctag_vid:12;
-+#else
-+ unsigned int ctag_vid:12;
-+ unsigned int cv:1;
-+ unsigned int stag_vid:12;
-+ unsigned int sv:1;
-+ unsigned int to:4;
-+ unsigned int index:2;
-+#endif
-+ unsigned char mac[6]; /* MAC address */
-+ } sppe_prda;
-+
-+ struct {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int interval:2;
-+ unsigned int mfactor:1;
-+ unsigned int ununsed:29;
-+#else
-+ unsigned int ununsed:29;
-+ unsigned int mfactor:1;
-+ unsigned int interval:2;
-+#endif
-+ } sppe_rlcfg;
-+
-+ struct {
-+ unsigned int index;
-+ SPPE_PPPOE_RELAY rule;
-+ } sppe_pppoe_relay;
-+
-+ struct {
-+ unsigned int index;
-+ SPPE_BRIDGE rule;
-+ } sppe_bridge;
-+
-+ struct {
-+ unsigned int index;
-+ SPPE_ACL rule;
-+ } sppe_acl;
-+
-+ struct {
-+ unsigned int index;
-+ SPPE_ROUTE rule;
-+ } sppe_route;
-+#if 0
-+ struct {
-+ unsigned int index;
-+ SPPE_VSERVER rule;
-+ } sppe_vserver;
-+#else
-+ struct {
-+ unsigned int index;
-+ SPPE_SNAT rule;
-+ } sppe_snat;
-+
-+ struct {
-+ unsigned int index;
-+ SPPE_DNAT rule;
-+ } sppe_dnat;
-+#endif
-+ struct {
-+ unsigned int index;
-+ SPPE_GLOBAL_RATE_LIMIT rule;
-+ } sppe_grl;
-+
-+ struct {
-+ unsigned char unit;
-+ unsigned char arp;
-+ unsigned char bridge;
-+ unsigned char tcp;
-+ unsigned char udp;
-+ unsigned char pptp;
-+ unsigned char other;
-+ } sppe_agingout;
-+
-+ struct {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int index:2;
-+ unsigned int reserved:20;
-+ unsigned int max:10;
-+#else
-+ unsigned int max:10;
-+ unsigned int reserved:20;
-+ unsigned int index:2;
-+#endif
-+ } sppe_max_length;
-+
-+ struct {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int v6:1;
-+ unsigned int s:1;
-+ unsigned int r:1;
-+ unsigned int fr:1;
-+ unsigned int to:4;
-+ unsigned int unused:24;
-+#else
-+ unsigned int unused:24;
-+ unsigned int to:4;
-+ unsigned int fr:1;
-+ unsigned int r:1;
-+ unsigned int s:1;
-+ unsigned int v6:1;
-+#endif
-+
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int sv:1;
-+ unsigned int stag_vid:12;
-+ unsigned int cv:1;
-+ unsigned int ctag_vid:12;
-+ unsigned int unused_1:6;
-+#else
-+ unsigned int unused_1:6;
-+ unsigned int ctag_vid:12;
-+ unsigned int cv:1;
-+ unsigned int stag_vid:12;
-+ unsigned int sv:1;
-+#endif
-+ unsigned int ip[4];
-+ unsigned char mac[6];
-+ } sppe_arp;
-+
-+ SPPE_ARL sppe_arl;
-+
-+ struct {
-+ unsigned int sid;
-+ unsigned int index;
-+ } sppe_pppoe_sid;
-+
-+ SPPE_FLOW_BRIDGE_IPV4 flow_bridge_ipv4;
-+ SPPE_FLOW_BRIDGE_IPV6 flow_bridge_ipv6;
-+ SPPE_FLOW_ROUTE_IPV4 flow_route_ipv4;
-+ SPPE_FLOW_ROUTE_IPV6 flow_route_ipv6;
-+ SPPE_FLOW_NAT_IPV4 flow_nat_ipv4;
-+ SPPE_FLOW_NAT_IPV6 flow_nat_ipv6;
-+ SPPE_FLOW_TWICE_NAT flow_twice_nat;
-+ SPPE_FLOW_MCAST_IPV4 flow_mcast_ipv4;
-+ SPPE_FLOW_MCAST_IPV6 flow_mcast_ipv6;
-+ SPPE_FLOW_BRIDGE_L2 flow_bridge_l2;
-+
-+ struct {
-+ SPPE_DUMP_TYPE type;
-+ unsigned short key;
-+ unsigned short way;
-+ unsigned int raw[23];
-+ } sppe_dump;
-+
-+ unsigned int sppe_sna_th;
-+
-+ struct {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int enable:1;
-+ unsigned int lan:6;
-+ unsigned int wan:6;
-+ unsigned int reserved:19;
-+#else
-+ unsigned int reserved:19;
-+ unsigned int wan:6;
-+ unsigned int lan:6;
-+ unsigned int enable:1;
-+#endif
-+ } sppe_chgdscp;
-+
-+ struct {
-+#ifndef CONFIG_SWITCH_BIG_ENDIAN
-+ unsigned int enable:1;
-+ unsigned int lan:3;
-+ unsigned int wan:3;
-+ unsigned int reserved:25;
-+#else
-+ unsigned int reserved:25;
-+ unsigned int wan:3;
-+ unsigned int lan:3;
-+ unsigned int enable:1;
-+#endif
-+ } sppe_chgpri;
-+
-+ struct {
-+ int enable;
-+ int module;
-+ int level;
-+ } sppe_debug;
-+
-+ struct {
-+ unsigned int offset;
-+ unsigned int data;
-+ } sppe_reg;
-+
-+ struct {
-+ unsigned int offset;
-+ unsigned int data;
-+ } sppe_sram;
-+
-+ struct {
-+ char enable;
-+ unsigned int max;
-+ unsigned int min;
-+ char drop_red;
-+ char pass_green;
-+ } sppe_rl_flow;
-+
-+ struct {
-+ char enable;
-+ unsigned int max;
-+ unsigned int min;
-+ char drop_red;
-+ char pass_green;
-+ } sppe_rl_rule;
-+
-+ struct {
-+ unsigned int index;
-+ unsigned short start;
-+ unsigned short end;
-+ SPPE_LIMIT limit;
-+ } sppe_bm_flow;
-+
-+ struct {
-+ unsigned int index;
-+ unsigned int pkt_cnt;
-+ unsigned int byte_cnt;
-+ } sppe_accounting_group;
-+
-+ struct {
-+ unsigned int pkt_cnt;
-+ } sppe_drop_ipcs_err; /* IP checksum error */
-+
-+ struct {
-+ unsigned int pkt_cnt;
-+ } sppe_drop_rate_limit;
-+
-+ struct {
-+ unsigned int pkt_cnt;
-+ } sppe_drop_others;
-+
-+ struct {
-+ unsigned int index;
-+ unsigned char name[16];
-+ struct net_device *dev;
-+ unsigned int vid;
-+ } sppe_pci_fp_dev;
-+
-+ SPPE_INIT sppe_init;
-+
-+ } data;
-+} SPPE_PARAM;
-+
-+extern int sppe_hook_ready;
-+extern int (*sppe_func_hook)(SPPE_PARAM *param);
-+
-+extern int sppe_pci_fp_ready;
-+extern int (*sppe_pci_fp_hook)(SPPE_PARAM *param);
-+
-+#endif /* CONFIG_CNS3XXX_SPPE */
-+
-+#endif /* _SPPE_H_ */
---- /dev/null
-+++ b/include/linux/cns3xxx/switch_api.h
-@@ -0,0 +1,366 @@
-+/*******************************************************************************
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the Free
-+ * Software Foundation; either version 2 of the License, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program; if not, write to the Free Software Foundation, Inc., 59
-+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this distribution in the
-+ * file called LICENSE.
-+ *
-+ * Contact Information:
-+ * Technology Support <tech@starsemi.com>
-+ * Star Semiconductor 4F, No.1, Chin-Shan 8th St, Hsin-Chu,300 Taiwan, R.O.C
-+ *
-+ ********************************************************************************/
-+
-+#ifndef SWITCH_API_H_K
-+#define SWITCH_API_H_K
-+
-+
-+#ifndef __KERNEL__
-+typedef unsigned int u32;
-+typedef unsigned short int u16;
-+typedef unsigned char u8;
-+typedef int s32;
-+#else
-+
-+#include <linux/types.h>
-+
-+#endif
-+
-+
-+#define CAVM_OK 0
-+#define CAVM_ERR 1
-+#define CAVM_NOT_FOUND 2
-+#define CAVM_FOUND 3
-+#define CAVM_FAIL -1 // use minus
-+
-+#define MAC_PORT0 0
-+#define MAC_PORT1 1
-+#define MAC_PORT2 2
-+#define CPU_PORT 3
-+
-+typedef enum
-+{
-+
-+
-+ CNS3XXX_ARL_TABLE_LOOKUP,
-+ CNS3XXX_ARL_TABLE_ADD,
-+ CNS3XXX_ARL_TABLE_DEL,
-+ CNS3XXX_ARL_TABLE_SEARCH,
-+ CNS3XXX_ARL_TABLE_SEARCH_AGAIN,
-+ CNS3XXX_ARL_IS_TABLE_END,
-+ CNS3XXX_ARL_TABLE_FLUSH,
-+
-+ CNS3XXX_VLAN_TABLE_LOOKUP,
-+ CNS3XXX_VLAN_TABLE_ADD,
-+ CNS3XXX_VLAN_TABLE_DEL,
-+ CNS3XXX_VLAN_TABLE_READ,
-+
-+ CNS3XXX_SKEW_SET,
-+ CNS3XXX_SKEW_GET,
-+
-+ CNS3XXX_BRIDGE_SET,
-+ CNS3XXX_BRIDGE_GET,
-+
-+ CNS3XXX_PORT_NEIGHBOR_SET,
-+ CNS3XXX_PORT_NEIGHBOR_GET,
-+
-+ CNS3XXX_HOL_PREVENT_SET,
-+ CNS3XXX_HOL_PREVENT_GET,
-+
-+ CNS3XXX_TC_SET, // traffic class, for 1, 2, 4, traffic class
-+ CNS3XXX_TC_GET,
-+
-+ CNS3XXX_PRI_CTRL_SET,
-+ CNS3XXX_PRI_CTRL_GET,
-+
-+ CNS3XXX_DMA_RING_CTRL_SET,
-+ CNS3XXX_DMA_RING_CTRL_GET,
-+
-+ CNS3XXX_PRI_IP_DSCP_SET,
-+ CNS3XXX_PRI_IP_DSCP_GET,
-+
-+ CNS3XXX_ETYPE_SET,
-+ CNS3XXX_ETYPE_GET,
-+
-+ CNS3XXX_UDP_RANGE_SET,
-+ CNS3XXX_UDP_RANGE_GET,
-+
-+ CNS3XXX_ARP_REQUEST_SET,
-+ CNS3XXX_ARP_REQUEST_GET,
-+
-+ CNS3XXX_RATE_LIMIT_SET,
-+ CNS3XXX_RATE_LIMIT_GET,
-+
-+ CNS3XXX_QUEUE_WEIGHT_SET,
-+ CNS3XXX_QUEUE_WEIGHT_GET,
-+
-+ CNS3XXX_FC_RLS_SET,
-+ CNS3XXX_FC_RLS_GET,
-+
-+ CNS3XXX_FC_SET_SET,
-+ CNS3XXX_FC_SET_GET,
-+
-+ CNS3XXX_SARL_RLS_SET,
-+ CNS3XXX_SARL_RLS_GET,
-+
-+ CNS3XXX_SARL_SET_SET,
-+ CNS3XXX_SARL_SET_GET,
-+
-+ CNS3XXX_SARL_OQ_SET,
-+ CNS3XXX_SARL_OQ_GET,
-+
-+ CNS3XXX_SARL_ENABLE_SET,
-+ CNS3XXX_SARL_ENABLE_GET,
-+
-+ CNS3XXX_FC_SET,
-+ CNS3XXX_FC_GET,
-+
-+ CNS3XXX_IVL_SET,
-+ CNS3XXX_IVL_GET,
-+
-+ CNS3XXX_WAN_PORT_SET,
-+ CNS3XXX_WAN_PORT_GET,
-+
-+ CNS3XXX_PVID_GET,
-+ CNS3XXX_PVID_SET,
-+
-+ CNS3XXX_QA_GET, // queue allocate
-+ CNS3XXX_QA_SET,
-+
-+ CNS3XXX_PACKET_MAX_LEN_GET, // set maximun frame length.
-+ CNS3XXX_PACKET_MAX_LEN_SET,
-+
-+ CNS3XXX_BCM53115M_REG_READ,
-+ CNS3XXX_BCM53115M_REG_WRITE,
-+
-+ CNS3XXX_RXRING_STATUS,
-+ CNS3XXX_TXRING_STATUS,
-+
-+ CNS3XXX_DUMP_MIB_COUNTER,
-+
-+ CNS3XXX_REG_READ,
-+ CNS3XXX_REG_WRITE,
-+
-+}CNS3XXXIoctlCmd;
-+
-+typedef struct
-+{
-+ u8 vlan_index;
-+ u8 valid;
-+ u16 vid;
-+ u8 wan_side;
-+ u8 etag_pmap;
-+ u8 mb_pmap;
-+ //u8 my_mac[6];
-+ u8 *my_mac;
-+}VLANTableEntry; // for vlan table function
-+
-+typedef struct
-+{
-+ u16 vid;
-+ u8 pmap;
-+ //u8 mac[6];
-+ u8 *mac;
-+ u8 age_field;
-+ u8 vlan_mac;
-+ u8 filter;
-+}ARLTableEntry; // for arl table function
-+
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ ARLTableEntry entry;
-+}CNS3XXXARLTableEntry; // for ioctl arl ...
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ VLANTableEntry entry;
-+}CNS3XXXVLANTableEntry; // for ioctl VLAN table ...
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ u8 enable;
-+}CNS3XXXHOLPreventControl;
-+
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned char which_port; // 0, 1, 2, 3 (cpu port)
-+ unsigned char type; // 0: C-Neighbor, 1: S-Neighbor
-+}CNS3XXXPortNeighborControl;
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned char type; // 0: C-Component, 1: S-Component
-+}CNS3XXXBridgeControl;
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned char tc; // traffic class, for 1, 2, 4, traffic class
-+}CNS3XXXTrafficClassControl;
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned char which_port; // 0, 1, 2, 3 (cpu port)
-+ unsigned int val;
-+ unsigned char port_pri;
-+ unsigned char udp_pri_en;
-+ unsigned char dscp_pri_en;
-+ unsigned char vlan_pri_en;
-+ unsigned char ether_pri_en;
-+}CNS3XXXPriCtrlControl;
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned char ts_double_ring_en;
-+ unsigned char fs_double_ring_en;
-+ unsigned char fs_pkt_allocate;
-+}CNS3XXXDmaRingCtrlControl;
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned int ip_dscp_num; // 0 ~ 63
-+ unsigned char pri; // 3 bits
-+}CNS3XXXPriIpDscpControl;
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned int etype_num;
-+ unsigned int val;
-+ unsigned int pri;
-+}CNS3XXXEtypeControl;
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned int udp_range_num;
-+ unsigned short int port_start;
-+ unsigned short int port_end;
-+}CNS3XXXUdpRangeEtypeControl;
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned char val; // 0: boradcast forward, 1: redirect to the CPU
-+}CNS3XXXArpRequestControl;
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned char which_port; // 0, 1, 2, 3 (port 0 extra dma)
-+ unsigned char band_width;
-+ unsigned char base_rate;
-+
-+}CNS3XXXRateLimitEntry; // for ioctl arl ...
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned char which_port; // 0, 1, 2, 3 (port 0 extra dma)
-+ unsigned char sch_mode;
-+ unsigned char q0_w;
-+ unsigned char q1_w;
-+ unsigned char q2_w;
-+ unsigned char q3_w;
-+}CNS3XXXQueueWeightEntry; // for ioctl arl ...
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned int val;
-+ unsigned char tc; // 0-3
-+ unsigned char gyr; // 0 (green), 1(yellow), 2(red)
-+}CNS3XXXSARLEntry; // for ioctl arl ...
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned char port; // 0, 1, 2, 3 (cpu port)
-+ unsigned char fc_en; // 0(rx/tx disable), 1(rx enable), 2(tx enable), 3(rx/tx enable)
-+}CNS3XXXFCEntry; // for ioctl arl ...
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned char enable; // enable: 1 -> IVL, enable: 0 -> SVL
-+}CNS3XXXIVLEntry; // for ioctl arl ...
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned char wan_port;
-+}CNS3XXXWANPortEntry; // for ioctl arl ...
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned char which_port;
-+ unsigned int pvid;
-+}CNS3XXXPVIDEntry; // for ioctl arl ...
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned char qa; // queue allocate
-+}CNS3XXXQAEntry; // for ioctl arl ...
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ unsigned char max_len; // maximum frame length
-+}CNS3XXXMaxLenEntry; // for ioctl arl ...
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ u8 page;
-+ u8 offset;
-+ u32 u32_val;
-+ u16 u16_val;
-+ u8 u8_val;
-+ u8 data_len;
-+
-+}CNS3XXXBCM53115M;
-+
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ u32 mib[52];
-+ u16 mib_len;
-+}CNS3XXXMIBCounter;
-+
-+#if 0
-+typedef struct
-+{
-+ CNS3XXXIoctlCmd cmd;
-+ TXRing *tx_ring;
-+ RXRing *rx_ring;
-+}CNS3XXXRingStatus;
-+#endif
-+
-+
-+#endif
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -133,6 +133,10 @@
-
- #include "net-sysfs.h"
-
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+#include <linux/cns3xxx/sppe.h>
-+#endif
-+
- /* Instead of increasing this, you should create a hash table. */
- #define MAX_GRO_SKBS 8
-
-@@ -1944,6 +1948,197 @@ int weight_p __read_mostly = 64;
-
- DEFINE_PER_CPU(struct netif_rx_stats, netdev_rx_stat) = { 0, };
-
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+static struct net_device *tun_netdev = NULL;
-+
-+int sppe_pci_fp(struct sk_buff *skb)
-+{
-+ SPPE_PARAM param;
-+ struct iphdr *iph;
-+#if defined (CONFIG_IPV6)
-+ struct ipv6hdr *ipv6h;
-+#endif
-+ struct tcphdr *th;
-+ struct udphdr *uh;
-+ int pci_dev_index;
-+
-+ if (!sppe_hook_ready) {
-+ goto NOT_IN_FP;
-+ }
-+
-+ if (!sppe_pci_fp_ready) {
-+ goto NOT_IN_FP;
-+ }
-+
-+ /* check device packet comes from, is a registed device? */
-+ memset(¶m, 0, sizeof(SPPE_PARAM));
-+ param.cmd = SPPE_CMD_PCI_FP_DEV;
-+ param.op = SPPE_OP_GET;
-+ param.data.sppe_pci_fp_dev.dev = skb->dev;
-+ sppe_pci_fp_hook(¶m);
-+
-+ pci_dev_index = param.data.sppe_pci_fp_dev.index;
-+
-+ if ((-1) == pci_dev_index) {
-+ goto NOT_IN_FP;
-+ }
-+
-+ if (!tun_netdev) {
-+ tun_netdev = dev_get_by_name(&init_net, "fp");
-+
-+ if (!tun_netdev) {
-+ goto NOT_IN_FP;
-+ }
-+ }
-+
-+ /* check PPE status */
-+ memset(¶m, 0, sizeof(SPPE_PARAM));
-+ param.cmd = SPPE_CMD_ENABLE;
-+ param.op = SPPE_OP_GET;
-+
-+ if (sppe_func_hook(¶m)) {
-+ printk("<0><%s> fail to get PPE status!!\n", __FUNCTION__);
-+ goto NOT_IN_FP;
-+ }
-+
-+ if (!param.data.sppe_enable) {
-+ goto NOT_IN_FP;
-+ }
-+
-+ memset(¶m, 0, sizeof(SPPE_PARAM));
-+
-+ switch (htons(skb->protocol)) {
-+ case ETH_P_IP:
-+ iph = (struct iphdr *)skb->data;
-+
-+ if (5 != iph->ihl) { goto NOT_IN_FP; }
-+
-+ if (iph->frag_off & 0x20) { goto NOT_IN_FP; }
-+
-+ param.cmd = SPPE_CMD_FLOW_NAT_IPV4;
-+ param.op = SPPE_OP_GET;
-+
-+ param.data.flow_nat_ipv4.sip = ntohl(iph->saddr);
-+ param.data.flow_nat_ipv4.dip = ntohl(iph->daddr);
-+
-+ switch (iph->protocol) {
-+ case IPPROTO_TCP:
-+ th = (struct tcphdr *) ((int *)iph + 5); /* IP header length is 20 */
-+
-+ if ((th->syn) || (th->fin) || (th->rst)) { goto NOT_IN_FP; }
-+
-+ param.data.flow_nat_ipv4.l4_prot = SPPE_PROT_TCP;
-+ param.data.flow_nat_ipv4.l4.port.src = ntohs(th->source);
-+ param.data.flow_nat_ipv4.l4.port.dst = ntohs(th->dest);
-+ break;
-+ case IPPROTO_UDP:
-+ uh = (struct udphdr *) ((int *)iph + 5); /* IP header length is 20 */
-+ param.data.flow_nat_ipv4.l4_prot = SPPE_PROT_UDP;
-+ param.data.flow_nat_ipv4.l4.port.src = ntohs(uh->source);
-+ param.data.flow_nat_ipv4.l4.port.dst = ntohs(uh->dest);
-+ break;
-+ default:
-+ goto NOT_IN_FP;
-+ }
-+
-+ if (SPPE_RESULT_SUCCESS != sppe_func_hook(¶m)) {
-+ goto NOT_IN_FP;
-+ } else {
-+ struct ethhdr *eth;
-+
-+ eth = (struct ethhdr *)skb->mac_header;
-+
-+ memset(¶m, 0, sizeof(SPPE_PARAM));
-+ param.cmd = SPPE_CMD_ARP;
-+ param.op = SPPE_OP_SET;
-+ param.data.sppe_arp.s = 1;
-+ param.data.sppe_arp.ip[0] = iph->saddr;
-+ param.data.sppe_arp.mac[0] = eth->h_source[0];
-+ param.data.sppe_arp.mac[1] = eth->h_source[1];
-+ param.data.sppe_arp.mac[2] = eth->h_source[2];
-+ param.data.sppe_arp.mac[3] = eth->h_source[3];
-+ param.data.sppe_arp.mac[4] = eth->h_source[4];
-+ param.data.sppe_arp.mac[5] = eth->h_source[5];
-+ param.data.sppe_arp.unused_1 = pci_dev_index;
-+
-+ if (SPPE_RESULT_SUCCESS != sppe_func_hook(¶m)) {
-+ printk("add ARP fail\n");
-+ #if 0
-+ } else {
-+ param.data.sppe_arp.unused_1 = 0xf;
-+ param.op = SPPE_OP_GET;
-+ if (SPPE_RESULT_SUCCESS != sppe_func_hook(¶m)) {
-+ printk("read ARP fail\n");
-+ } else {
-+ printk("param.data.sppe_arp.unused_1 %d\n", param.data.sppe_arp.unused_1);
-+ }
-+ #endif
-+ }
-+ }
-+ break; /* case ETH_P_IP: */
-+#if defined (CONFIG_IPV6)
-+ case ETH_P_IPV6:
-+ ipv6h = (struct ipv6hdr *)skb->data;
-+ switch (ipv6h->nexthdr) {
-+ case IPPROTO_TCP:
-+ th = (struct tcphdr *) ((int *)ipv6h + 10); /* IPv6 header length is 40 bytes */
-+
-+ if ((th->syn) || (th->fin) || (th->rst)) { goto NOT_IN_FP; }
-+
-+ param.data.flow_route_ipv6.l4_prot = SPPE_PROT_TCP;
-+ param.data.flow_route_ipv6.l4.port.src = ntohs(th->source);
-+ param.data.flow_route_ipv6.l4.port.dst = ntohs(th->dest);
-+ param.data.flow_route_ipv6.l4_prot = SPPE_PROT_TCP;
-+ break;
-+ case IPPROTO_UDP:
-+ uh = (struct udphdr *) ((int *)ipv6h + 10); /* IPv6 header length is 40 byte */
-+ param.data.flow_route_ipv6.l4_prot = SPPE_PROT_UDP;
-+ param.data.flow_route_ipv6.l4.port.src = ntohs(uh->source);
-+ param.data.flow_route_ipv6.l4.port.dst = ntohs(uh->dest);
-+ break;
-+ default:
-+ goto NOT_IN_FP;
-+ }
-+
-+ param.data.flow_route_ipv6.sip[0] = ntohl(ipv6h->saddr.s6_addr32[0]);
-+ param.data.flow_route_ipv6.sip[1] = ntohl(ipv6h->saddr.s6_addr32[1]);
-+ param.data.flow_route_ipv6.sip[2] = ntohl(ipv6h->saddr.s6_addr32[2]);
-+ param.data.flow_route_ipv6.sip[3] = ntohl(ipv6h->saddr.s6_addr32[3]);
-+ param.data.flow_route_ipv6.dip[0] = ntohl(ipv6h->daddr.s6_addr32[0]);
-+ param.data.flow_route_ipv6.dip[1] = ntohl(ipv6h->daddr.s6_addr32[1]);
-+ param.data.flow_route_ipv6.dip[2] = ntohl(ipv6h->daddr.s6_addr32[2]);
-+ param.data.flow_route_ipv6.dip[3] = ntohl(ipv6h->daddr.s6_addr32[3]);
-+
-+ param.cmd = SPPE_CMD_FLOW_ROUTE_IPV6;
-+ param.op = SPPE_OP_GET;
-+
-+ if (SPPE_RESULT_SUCCESS != sppe_func_hook(¶m)) {
-+ goto NOT_IN_FP;
-+ }
-+
-+ break; /* case ETH_P_IPV6: */
-+#endif
-+ case ETH_P_PPP_SES:
-+ break;
-+ default: /* unsupport protocol */
-+ goto NOT_IN_FP;
-+ }
-+ /* Update counter */
-+ skb->dev = tun_netdev;
-+ skb->ip_summed = CHECKSUM_NONE;
-+ skb_push(skb, ETH_HLEN);
-+
-+ dev_queue_xmit(skb);
-+
-+return 0;
-+
-+NOT_IN_FP:
-+ return (-1);
-+}
-+#endif
-+
-+
-+
-
- /**
- * netif_rx - post buffer to the network code
-@@ -1965,6 +2160,12 @@ int netif_rx(struct sk_buff *skb)
- struct softnet_data *queue;
- unsigned long flags;
-
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+ if (0 == sppe_pci_fp(skb)) {
-+ return NET_RX_SUCCESS;
-+ }
-+#endif
-+
- /* if netpoll wants it, pretend we never saw it */
- if (netpoll_rx(skb))
- return NET_RX_DROP;
-@@ -2259,6 +2460,12 @@ int netif_receive_skb(struct sk_buff *sk
- if (!skb->tstamp.tv64)
- net_timestamp(skb);
-
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+ if (0 == sppe_pci_fp(skb)) {
-+ return NET_RX_SUCCESS;
-+ }
-+#endif
-+
- if (skb->vlan_tci && vlan_hwaccel_do_receive(skb))
- return NET_RX_SUCCESS;
-
---- a/net/netfilter/nf_conntrack_core.c
-+++ b/net/netfilter/nf_conntrack_core.c
-@@ -42,6 +42,9 @@
- #include <net/netfilter/nf_conntrack_ecache.h>
- #include <net/netfilter/nf_nat.h>
- #include <net/netfilter/nf_nat_core.h>
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+#include <linux/cns3xxx/sppe.h>
-+#endif
-
- #define NF_CONNTRACK_VERSION "0.5.0"
-
-@@ -275,6 +278,92 @@ void nf_ct_insert_dying_list(struct nf_c
- }
- EXPORT_SYMBOL_GPL(nf_ct_insert_dying_list);
-
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+static int sppe_flow_del(struct nf_conn *ct)
-+{
-+ if (sppe_hook_ready) {
-+ SPPE_PARAM param;
-+
-+ struct nf_conntrack_tuple *orig, *reply;
-+
-+ orig = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-+ reply = &ct->tuplehash[IP_CT_DIR_REPLY].tuple;
-+
-+ if (PF_INET == orig->src.l3num) {
-+ param.cmd = SPPE_CMD_FLOW_NAT_IPV4;
-+ } else if (PF_INET6 == orig->src.l3num) {
-+ param.cmd = SPPE_CMD_FLOW_ROUTE_IPV6;
-+ } else {
-+ goto SPPE_FLOW_DEL_FINI;
-+ }
-+
-+ if (IPPROTO_TCP == orig->dst.protonum) {
-+ param.data.flow_nat_ipv4.l4_prot = SPPE_PROT_TCP;
-+ } else if (IPPROTO_UDP == orig->dst.protonum) {
-+ param.data.flow_nat_ipv4.l4_prot = SPPE_PROT_UDP;
-+ } else if (IPPROTO_GRE == orig->dst.protonum) {
-+ param.data.flow_nat_ipv4.l4_prot = SPPE_PROT_PPTP_GRE;
-+ } else {
-+ goto SPPE_FLOW_DEL_FINI;
-+ }
-+
-+ param.op = SPPE_OP_DELETE_OUTDATED;
-+
-+ param.data.flow_nat_ipv4.fw = 0;
-+ if (SPPE_CMD_FLOW_ROUTE_IPV6 == param.cmd) {
-+ param.data.flow_route_ipv6.sip[0] = htonl(orig->src.u3.ip6[0]);
-+ param.data.flow_route_ipv6.sip[1] = htonl(orig->src.u3.ip6[1]);
-+ param.data.flow_route_ipv6.sip[2] = htonl(orig->src.u3.ip6[2]);
-+ param.data.flow_route_ipv6.sip[3] = htonl(orig->src.u3.ip6[3]);
-+ param.data.flow_route_ipv6.dip[0] = htonl(orig->dst.u3.ip6[0]);
-+ param.data.flow_route_ipv6.dip[1] = htonl(orig->dst.u3.ip6[1]);
-+ param.data.flow_route_ipv6.dip[2] = htonl(orig->dst.u3.ip6[2]);
-+ param.data.flow_route_ipv6.dip[3] = htonl(orig->dst.u3.ip6[3]);
-+ param.data.flow_route_ipv6.l4.port.src = htons(orig->src.u.tcp.port);
-+ param.data.flow_route_ipv6.l4.port.dst = htons(orig->dst.u.tcp.port);
-+ } else {
-+ param.data.flow_nat_ipv4.sip = htonl(orig->src.u3.ip);
-+ param.data.flow_nat_ipv4.dip = htonl(orig->dst.u3.ip);
-+ param.data.flow_nat_ipv4.l4.port.src = htons(orig->src.u.tcp.port);
-+ param.data.flow_nat_ipv4.l4.port.dst = htons(orig->dst.u.tcp.port);
-+ }
-+
-+ if (SPPE_RESULT_FAIL == sppe_func_hook(¶m)) {
-+ return (-1);
-+ }
-+
-+ param.data.flow_nat_ipv4.fw = 1;
-+
-+ if (SPPE_CMD_FLOW_ROUTE_IPV6 == param.cmd) {
-+ param.data.flow_route_ipv6.sip[0] = htonl(reply->src.u3.ip6[0]);
-+ param.data.flow_route_ipv6.sip[1] = htonl(reply->src.u3.ip6[1]);
-+ param.data.flow_route_ipv6.sip[2] = htonl(reply->src.u3.ip6[2]);
-+ param.data.flow_route_ipv6.sip[3] = htonl(reply->src.u3.ip6[3]);
-+ param.data.flow_route_ipv6.dip[0] = htonl(reply->dst.u3.ip6[0]);
-+ param.data.flow_route_ipv6.dip[1] = htonl(reply->dst.u3.ip6[1]);
-+ param.data.flow_route_ipv6.dip[2] = htonl(reply->dst.u3.ip6[2]);
-+ param.data.flow_route_ipv6.dip[3] = htonl(reply->dst.u3.ip6[3]);
-+
-+ param.data.flow_route_ipv6.l4.port.src = htons(reply->src.u.tcp.port);
-+ param.data.flow_route_ipv6.l4.port.dst = htons(reply->dst.u.tcp.port);
-+ } else {
-+ param.data.flow_nat_ipv4.sip = htonl(reply->src.u3.ip);
-+ param.data.flow_nat_ipv4.dip = htonl(reply->dst.u3.ip);
-+ param.data.flow_nat_ipv4.l4.port.src = htons(reply->src.u.tcp.port);
-+ param.data.flow_nat_ipv4.l4.port.dst = htons(reply->dst.u.tcp.port);
-+ }
-+
-+ if (SPPE_RESULT_FAIL == sppe_func_hook(¶m)) {
-+ return (-1);
-+ }
-+ }
-+
-+SPPE_FLOW_DEL_FINI:
-+ return 0;
-+}
-+#endif
-+
-+
- static void death_by_timeout(unsigned long ul_conntrack)
- {
- struct nf_conn *ct = (void *)ul_conntrack;
-@@ -289,6 +378,16 @@ static void death_by_timeout(unsigned lo
- set_bit(IPS_DYING_BIT, &ct->status);
- nf_ct_delete_from_lists(ct);
- nf_ct_put(ct);
-+
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+ if (sppe_flow_del(ct)) {
-+ #if 0
-+ ct->timeout.expires = jiffies + (120*HZ);
-+ add_timer(&ct->timeout);
-+ #endif
-+ }
-+#endif
-+
- }
-
- /*
---- a/net/netfilter/nf_conntrack_proto_gre.c
-+++ b/net/netfilter/nf_conntrack_proto_gre.c
-@@ -40,6 +40,10 @@
- #include <linux/netfilter/nf_conntrack_proto_gre.h>
- #include <linux/netfilter/nf_conntrack_pptp.h>
-
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+#include <linux/cns3xxx/sppe.h>
-+#endif
-+
- #define GRE_TIMEOUT (30 * HZ)
- #define GRE_STREAM_TIMEOUT (180 * HZ)
-
-@@ -226,6 +230,57 @@ static int gre_print_conntrack(struct se
- (ct->proto.gre.stream_timeout / HZ));
- }
-
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+static int sppe_gre_flow_add(struct nf_conn *ct)
-+{
-+ SPPE_PARAM param;
-+ struct nf_conntrack_tuple *orig, *reply;
-+
-+ if (0 == sppe_hook_ready) {
-+ return 0;
-+ }
-+
-+ memset(¶m, 0, sizeof(SPPE_PARAM));
-+
-+ orig = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-+ reply = &ct->tuplehash[IP_CT_DIR_REPLY].tuple;
-+
-+ param.cmd = SPPE_CMD_FLOW_NAT_IPV4;
-+ param.op = SPPE_OP_SET;
-+
-+ param.data.flow_nat_ipv4.fw = 0;
-+ param.data.flow_nat_ipv4.sip = htonl(orig->src.u3.ip);
-+ param.data.flow_nat_ipv4.dip = htonl(orig->dst.u3.ip);
-+
-+ param.data.flow_nat_ipv4.l4_prot = SPPE_PROT_PPTP_GRE;
-+ param.data.flow_nat_ipv4.l4.gre.call_id = htons(orig->dst.u.gre.key);
-+
-+ param.data.flow_nat_ipv4.nat_ip = htonl(reply->dst.u3.ip);
-+ param.data.flow_nat_ipv4.l4.gre.nat_call_id = htons(reply->src.u.gre.key);
-+
-+ if (sppe_func_hook(¶m)) {
-+ printk("<0><%s> fail to add IPv4 from-LAN flow!!\n", __FUNCTION__);
-+ }
-+
-+ param.data.flow_nat_ipv4.fw = 1;
-+
-+ param.data.flow_nat_ipv4.sip = htonl(reply->src.u3.ip);
-+ param.data.flow_nat_ipv4.dip = htonl(reply->dst.u3.ip);
-+ param.data.flow_nat_ipv4.l4.gre.call_id = htons(reply->dst.u.gre.key);
-+
-+ param.data.flow_nat_ipv4.nat_ip = htonl(orig->src.u3.ip);
-+ param.data.flow_nat_ipv4.l4.gre.nat_call_id = htons(orig->src.u.gre.key);
-+
-+ if (sppe_func_hook(¶m)) {
-+ printk("<0><%s> fail to add IPv4 from-WAN flow!!\n", __FUNCTION__);
-+ }
-+
-+ return 0;
-+}
-+#endif
-+
-+
-+
- /* Returns verdict for packet, and may modify conntrack */
- static int gre_packet(struct nf_conn *ct,
- const struct sk_buff *skb,
-@@ -242,6 +297,10 @@ static int gre_packet(struct nf_conn *ct
- /* Also, more likely to be important, and not a probe. */
- set_bit(IPS_ASSURED_BIT, &ct->status);
- nf_conntrack_event_cache(IPCT_STATUS, ct);
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+ sppe_gre_flow_add(ct);
-+#endif
-+
- } else
- nf_ct_refresh_acct(ct, ctinfo, skb,
- ct->proto.gre.timeout);
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -29,6 +29,10 @@
- #include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
- #include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
-
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+#include <linux/cns3xxx/sppe.h>
-+#endif
-+
- /* "Be conservative in what you do,
- be liberal in what you accept from others."
- If it's non-zero, we mark only out of window RST segments as INVALID. */
-@@ -814,6 +818,141 @@ static int tcp_error(struct net *net,
- return NF_ACCEPT;
- }
-
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+static int sppe_tcp_flow_add_ipv4(struct nf_conn *ct)
-+{
-+ SPPE_PARAM param;
-+ struct nf_conntrack_tuple *orig, *reply;
-+
-+ orig = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-+ reply = &ct->tuplehash[IP_CT_DIR_REPLY].tuple;
-+
-+#if defined (CONFIG_NF_CONNTRACK_PPTP)
-+ if (1723 == htons(orig->dst.u.tcp.port)) {
-+ /* PPTP Control Protocol, PPTP GRE tunneling need this kind of packet */
-+ return 0;
-+ }
-+#endif
-+#if defined (CONFIG_NF_CONNTRACK_FTP)
-+ if (21 == htons(orig->dst.u.tcp.port)) {
-+ /* PPTP Control Protocol, PPTP GRE tunneling need this kind of packet */
-+ return 0;
-+ }
-+#endif
-+
-+ memset(¶m, 0, sizeof(SPPE_PARAM));
-+
-+ param.cmd = SPPE_CMD_FLOW_NAT_IPV4;
-+ param.op = SPPE_OP_SET;
-+
-+ param.data.flow_nat_ipv4.fw = 0;
-+ param.data.flow_nat_ipv4.sip = htonl(orig->src.u3.ip);
-+ param.data.flow_nat_ipv4.dip = htonl(orig->dst.u3.ip);
-+
-+ param.data.flow_nat_ipv4.l4_prot = SPPE_PROT_TCP;
-+ param.data.flow_nat_ipv4.l4.port.src = htons(orig->src.u.tcp.port);
-+ param.data.flow_nat_ipv4.l4.port.dst = htons(orig->dst.u.tcp.port);
-+
-+ param.data.flow_nat_ipv4.nat_ip = htonl(reply->dst.u3.ip);
-+ param.data.flow_nat_ipv4.nat_port = htons(reply->dst.u.tcp.port);
-+ param.data.flow_nat_ipv4.max_len = 0x3;
-+
-+ if (sppe_func_hook(¶m)) {
-+ printk("<0><%s> fail to add IPv4 from-LAN flow!!\n", __FUNCTION__);
-+ }
-+
-+ param.data.flow_nat_ipv4.fw = 1;
-+ param.data.flow_nat_ipv4.sip = htonl(reply->src.u3.ip);
-+ param.data.flow_nat_ipv4.dip = htonl(reply->dst.u3.ip);
-+ param.data.flow_nat_ipv4.l4.port.src = htons(reply->src.u.tcp.port);
-+ param.data.flow_nat_ipv4.l4.port.dst = htons(reply->dst.u.tcp.port);
-+
-+ param.data.flow_nat_ipv4.nat_ip = htonl(orig->src.u3.ip);
-+ param.data.flow_nat_ipv4.nat_port = htons(orig->src.u.tcp.port);
-+
-+ if (sppe_func_hook(¶m)) {
-+ printk("<0><%s> fail to add IPv4 from-WAN flow!!\n", __FUNCTION__);
-+ }
-+
-+ return 0;
-+}
-+
-+static int sppe_tcp_flow_add_ipv6(struct nf_conn *ct)
-+{
-+ SPPE_PARAM param;
-+ struct nf_conntrack_tuple *orig, *reply;
-+
-+ orig = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-+ reply = &ct->tuplehash[IP_CT_DIR_REPLY].tuple;
-+
-+ if (1723 == htons(orig->dst.u.tcp.port)) {
-+ /* PPTP Control Protocol, PPTP GRE tunneling need this kind of packet */
-+ return 0;
-+ }
-+
-+ memset(¶m, 0, sizeof(SPPE_PARAM));
-+
-+ param.cmd = SPPE_CMD_FLOW_ROUTE_IPV6;
-+ param.op = SPPE_OP_SET;
-+
-+ /* from-LAN flow */
-+ param.data.flow_route_ipv6.fw = 0;
-+ param.data.flow_route_ipv6.sip[0] = htonl(orig->src.u3.ip6[0]);
-+ param.data.flow_route_ipv6.sip[1] = htonl(orig->src.u3.ip6[1]);
-+ param.data.flow_route_ipv6.sip[2] = htonl(orig->src.u3.ip6[2]);
-+ param.data.flow_route_ipv6.sip[3] = htonl(orig->src.u3.ip6[3]);
-+ param.data.flow_route_ipv6.dip[0] = htonl(orig->dst.u3.ip6[0]);
-+ param.data.flow_route_ipv6.dip[1] = htonl(orig->dst.u3.ip6[1]);
-+ param.data.flow_route_ipv6.dip[2] = htonl(orig->dst.u3.ip6[2]);
-+ param.data.flow_route_ipv6.dip[3] = htonl(orig->dst.u3.ip6[3]);
-+ param.data.flow_route_ipv6.l4_prot = SPPE_PROT_TCP;
-+ param.data.flow_route_ipv6.l4.port.src = htons(orig->src.u.tcp.port);
-+ param.data.flow_route_ipv6.l4.port.dst = htons(orig->dst.u.tcp.port);
-+ param.data.flow_route_ipv6.max_len = 0x3;
-+
-+ if (sppe_func_hook(¶m)) {
-+ printk("<0><%s> fail to add IPv6 from-LAN flow!!\n", __FUNCTION__);
-+ }
-+
-+ /* from-WAN flow */
-+ param.data.flow_route_ipv6.fw = 1;
-+ param.data.flow_route_ipv6.sip[0] = htonl(reply->src.u3.ip6[0]);
-+ param.data.flow_route_ipv6.sip[1] = htonl(reply->src.u3.ip6[1]);
-+ param.data.flow_route_ipv6.sip[2] = htonl(reply->src.u3.ip6[2]);
-+ param.data.flow_route_ipv6.sip[3] = htonl(reply->src.u3.ip6[3]);
-+ param.data.flow_route_ipv6.dip[0] = htonl(reply->dst.u3.ip6[0]);
-+ param.data.flow_route_ipv6.dip[1] = htonl(reply->dst.u3.ip6[1]);
-+ param.data.flow_route_ipv6.dip[2] = htonl(reply->dst.u3.ip6[2]);
-+ param.data.flow_route_ipv6.dip[3] = htonl(reply->dst.u3.ip6[3]);
-+ param.data.flow_route_ipv6.l4.port.src = htons(reply->src.u.tcp.port);
-+ param.data.flow_route_ipv6.l4.port.dst = htons(reply->dst.u.tcp.port);
-+
-+ if (sppe_func_hook(¶m)) {
-+ printk("<0><%s> fail to add IPv6 from-LAN flow!!\n", __FUNCTION__);
-+ }
-+
-+ return 0;
-+}
-+
-+static int sppe_tcp_flow_add(struct nf_conn *ct)
-+{
-+ if (0 == sppe_hook_ready) {
-+ return 0;
-+ }
-+
-+ if (AF_INET == ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.l3num) {
-+ sppe_tcp_flow_add_ipv4(ct);
-+ return 0;
-+ } else if (AF_INET6 == ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.l3num) {
-+ sppe_tcp_flow_add_ipv6(ct);
-+ return 0;
-+ }
-+
-+ /* return fail */
-+ return (-1);
-+}
-+#endif
-+
- /* Returns verdict for packet, or -1 for invalid. */
- static int tcp_packet(struct nf_conn *ct,
- const struct sk_buff *skb,
-@@ -961,11 +1100,18 @@ static int tcp_packet(struct nf_conn *ct
- break;
- }
-
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+ if(!(th->rst == 1 || th->fin == 1)) {
-+#endif
- if (!tcp_in_window(ct, &ct->proto.tcp, dir, index,
- skb, dataoff, th, pf)) {
- spin_unlock_bh(&ct->lock);
- return -NF_ACCEPT;
- }
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+ }
-+#endif
-+
- in_window:
- /* From now on we have got in-window packets */
- ct->proto.tcp.last_index = index;
-@@ -1015,6 +1161,10 @@ static int tcp_packet(struct nf_conn *ct
- connection. */
- set_bit(IPS_ASSURED_BIT, &ct->status);
- nf_conntrack_event_cache(IPCT_STATUS, ct);
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+ /* Add SPPE hardware flow */
-+ sppe_tcp_flow_add(ct);
-+#endif
- }
- nf_ct_refresh_acct(ct, ctinfo, skb, timeout);
-
---- a/net/netfilter/nf_conntrack_proto_udp.c
-+++ b/net/netfilter/nf_conntrack_proto_udp.c
-@@ -24,6 +24,9 @@
- #include <net/netfilter/nf_log.h>
- #include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
- #include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+#include <linux/cns3xxx/sppe.h>
-+#endif
-
- static unsigned int nf_ct_udp_timeout __read_mostly = 30*HZ;
- static unsigned int nf_ct_udp_timeout_stream __read_mostly = 180*HZ;
-@@ -63,6 +66,122 @@ static int udp_print_tuple(struct seq_fi
- ntohs(tuple->dst.u.udp.port));
- }
-
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+static int sppe_udp_flow_add_ipv4(struct nf_conn *ct)
-+{
-+ SPPE_PARAM param;
-+ struct nf_conntrack_tuple *orig, *reply;
-+
-+ orig = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-+ reply = &ct->tuplehash[IP_CT_DIR_REPLY].tuple;
-+
-+ memset(¶m, 0, sizeof(SPPE_PARAM));
-+
-+ param.cmd = SPPE_CMD_FLOW_NAT_IPV4;
-+ param.op = SPPE_OP_SET;
-+
-+ param.data.flow_nat_ipv4.fw = 0;
-+ param.data.flow_nat_ipv4.sip = htonl(orig->src.u3.ip);
-+ param.data.flow_nat_ipv4.dip = htonl(orig->dst.u3.ip);
-+ param.data.flow_nat_ipv4.l4_prot = SPPE_PROT_UDP;
-+
-+ param.data.flow_nat_ipv4.l4.port.src = htons(orig->src.u.tcp.port);
-+ param.data.flow_nat_ipv4.l4.port.dst = htons(orig->dst.u.tcp.port);
-+
-+ param.data.flow_nat_ipv4.nat_ip = htonl(reply->dst.u3.ip);
-+ param.data.flow_nat_ipv4.nat_port = htons(reply->dst.u.tcp.port);
-+
-+ if (sppe_func_hook(¶m)) {
-+ printk("<0><%s> fail to add IPv4 UDP from-LAN flow!!\n", __FUNCTION__);
-+ }
-+ param.data.flow_nat_ipv4.fw = 1;
-+ param.data.flow_nat_ipv4.sip = htonl(reply->src.u3.ip);
-+ param.data.flow_nat_ipv4.dip = htonl(reply->dst.u3.ip);
-+
-+ param.data.flow_nat_ipv4.l4.port.src = htons(reply->src.u.tcp.port);
-+ param.data.flow_nat_ipv4.l4.port.dst = htons(reply->dst.u.tcp.port);
-+
-+ param.data.flow_nat_ipv4.nat_ip = htonl(orig->src.u3.ip);
-+ param.data.flow_nat_ipv4.nat_port = htons(orig->src.u.tcp.port);
-+
-+ if (sppe_func_hook(¶m)) {
-+ printk("<0><%s> fail to add IPv4 from-WAN flow!!\n", __FUNCTION__);
-+ }
-+
-+ return 0;
-+}
-+
-+static int sppe_udp_flow_add_ipv6(struct nf_conn *ct)
-+{
-+ SPPE_PARAM param;
-+ struct nf_conntrack_tuple *orig, *reply;
-+
-+ orig = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-+ reply = &ct->tuplehash[IP_CT_DIR_REPLY].tuple;
-+
-+ memset(¶m, 0, sizeof(SPPE_PARAM));
-+
-+ param.cmd = SPPE_CMD_FLOW_ROUTE_IPV6;
-+ param.op = SPPE_OP_SET;
-+
-+ /* from-LAN flow */
-+ param.data.flow_route_ipv6.fw = 0;
-+ param.data.flow_route_ipv6.sip[0] = htonl(orig->src.u3.ip6[0]);
-+ param.data.flow_route_ipv6.sip[1] = htonl(orig->src.u3.ip6[1]);
-+ param.data.flow_route_ipv6.sip[2] = htonl(orig->src.u3.ip6[2]);
-+ param.data.flow_route_ipv6.sip[3] = htonl(orig->src.u3.ip6[3]);
-+ param.data.flow_route_ipv6.dip[0] = htonl(orig->dst.u3.ip6[0]);
-+ param.data.flow_route_ipv6.dip[1] = htonl(orig->dst.u3.ip6[1]);
-+ param.data.flow_route_ipv6.dip[2] = htonl(orig->dst.u3.ip6[2]);
-+ param.data.flow_route_ipv6.dip[3] = htonl(orig->dst.u3.ip6[3]);
-+ param.data.flow_route_ipv6.l4_prot = SPPE_PROT_UDP;
-+ param.data.flow_route_ipv6.l4.port.src = htons(orig->src.u.udp.port);
-+ param.data.flow_route_ipv6.l4.port.dst = htons(orig->dst.u.udp.port);
-+
-+ if (sppe_func_hook(¶m)) {
-+ printk("<0><%s> fail to add IPv6 from-LAN flow!!\n", __FUNCTION__);
-+ }
-+
-+ /* from-WAN flow */
-+ param.data.flow_route_ipv6.fw = 1;
-+ param.data.flow_route_ipv6.sip[0] = htonl(reply->src.u3.ip6[0]);
-+ param.data.flow_route_ipv6.sip[1] = htonl(reply->src.u3.ip6[1]);
-+ param.data.flow_route_ipv6.sip[2] = htonl(reply->src.u3.ip6[2]);
-+ param.data.flow_route_ipv6.sip[3] = htonl(reply->src.u3.ip6[3]);
-+ param.data.flow_route_ipv6.dip[0] = htonl(reply->dst.u3.ip6[0]);
-+ param.data.flow_route_ipv6.dip[1] = htonl(reply->dst.u3.ip6[1]);
-+ param.data.flow_route_ipv6.dip[2] = htonl(reply->dst.u3.ip6[2]);
-+ param.data.flow_route_ipv6.dip[3] = htonl(reply->dst.u3.ip6[3]);
-+ param.data.flow_route_ipv6.l4.port.src = htons(reply->src.u.udp.port);
-+ param.data.flow_route_ipv6.l4.port.dst = htons(reply->dst.u.udp.port);
-+
-+ if (sppe_func_hook(¶m)) {
-+ printk("<0><%s> fail to add IPv6 from-LAN flow!!\n", __FUNCTION__);
-+ }
-+
-+ return 0;
-+}
-+
-+static int sppe_udp_flow_add(struct nf_conn *ct)
-+{
-+ if (0 == sppe_hook_ready) {
-+ return 0;
-+ }
-+
-+ if (AF_INET == ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.l3num) {
-+ sppe_udp_flow_add_ipv4(ct);
-+ return 0;
-+ } else if (AF_INET6 == ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.l3num) {
-+ sppe_udp_flow_add_ipv6(ct);
-+ return 0;
-+ }
-+
-+ /* return fail */
-+ return (-1);
-+}
-+#endif
-+
-+
- /* Returns verdict for packet, and may modify conntracktype */
- static int udp_packet(struct nf_conn *ct,
- const struct sk_buff *skb,
-@@ -77,7 +196,15 @@ static int udp_packet(struct nf_conn *ct
- nf_ct_refresh_acct(ct, ctinfo, skb, nf_ct_udp_timeout_stream);
- /* Also, more likely to be important, and not a probe */
- if (!test_and_set_bit(IPS_ASSURED_BIT, &ct->status))
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+ {
-+#endif
- nf_conntrack_event_cache(IPCT_STATUS, ct);
-+#if defined (CONFIG_CNS3XXX_SPPE)
-+ /* Add SPPE hardware flow */
-+ sppe_udp_flow_add(ct);
-+ }
-+#endif
- } else
- nf_ct_refresh_acct(ct, ctinfo, skb, nf_ct_udp_timeout);
-
+++ /dev/null
---- a/crypto/xor.c
-+++ b/crypto/xor.c
-@@ -25,6 +25,26 @@
- /* The xor routines to use. */
- static struct xor_block_template *active_template;
-
-+#ifdef CONFIG_CNS3XXX_RAID
-+extern void do_cns_rdma_xorgen(unsigned int src_no, unsigned int bytes,
-+ void **bh_ptr, void *dst_ptr);
-+/**
-+ * xor_blocks - one pass xor
-+ * @src_count: source count
-+ * @bytes: length in bytes
-+ * @dest: dest
-+ * @srcs: srcs
-+ *
-+ * Desc:
-+ * 1. dest = xor(srcs[0...src_count-1]) within one calc
-+ * 2. don't care if dest also be placed in srcs list or not.
-+ */
-+void xor_blocks(unsigned int src_count, unsigned int bytes, void *dest,
-+ void **srcs)
-+{
-+ do_cns_rdma_xorgen(src_count, bytes, srcs, dest);
-+}
-+#else
- void
- xor_blocks(unsigned int src_count, unsigned int bytes, void *dest, void **srcs)
- {
-@@ -51,6 +71,7 @@ xor_blocks(unsigned int src_count, unsig
- p4 = (unsigned long *) srcs[3];
- active_template->do_5(bytes, dest, p1, p2, p3, p4);
- }
-+#endif /* CONFIG_CNS3XXX_RAID */
- EXPORT_SYMBOL(xor_blocks);
-
- /* Set of all registered templates. */
-@@ -95,7 +116,11 @@ do_xor_speed(struct xor_block_template *
- speed / 1000, speed % 1000);
- }
-
-+#ifdef CONFIG_CNS3XXX_RAID
-+int
-+#else
- static int __init
-+#endif /* CONFIG_CNS3XXX_RAID */
- calibrate_xor_blocks(void)
- {
- void *b1, *b2;
-@@ -139,7 +164,10 @@ calibrate_xor_blocks(void)
- if (f->speed > fastest->speed)
- fastest = f;
- }
--
-+#ifdef CONFIG_CNS3XXX_RAID
-+ /* preferred */
-+ fastest = template_list;
-+#endif /* CONFIG_CNS3XXX_RAID */
- printk(KERN_INFO "xor: using function: %s (%d.%03d MB/sec)\n",
- fastest->name, fastest->speed / 1000, fastest->speed % 1000);
-
-@@ -151,10 +179,20 @@ calibrate_xor_blocks(void)
- return 0;
- }
-
--static __exit void xor_exit(void) { }
-+#ifndef CONFIG_CNS3XXX_RAID
-+static __exit void xor_exit(void)
-+{
-+}
-+#endif /* ! CONFIG_CNS3XXX_RAID */
-
- MODULE_LICENSE("GPL");
-
-+#ifdef CONFIG_CNS3XXX_RAID
-+/*
-+ * Calibrate in R5 init.
-+ */
-+#else
- /* when built-in xor.o must initialize before drivers/md/md.o */
- core_initcall(calibrate_xor_blocks);
- module_exit(xor_exit);
-+#endif /* ! CONFIG_CNS3XXX_RAID */
---- a/drivers/md/Makefile
-+++ b/drivers/md/Makefile
-@@ -17,7 +17,7 @@ raid6_pq-y += raid6algos.o raid6recov.o
- raid6int8.o raid6int16.o raid6int32.o \
- raid6altivec1.o raid6altivec2.o raid6altivec4.o \
- raid6altivec8.o \
-- raid6mmx.o raid6sse1.o raid6sse2.o
-+ raid6mmx.o raid6sse1.o raid6sse2.o raid6cns.o
- hostprogs-y += mktables
-
- # Note: link order is important. All raid personalities
---- a/drivers/md/raid5.c
-+++ b/drivers/md/raid5.c
-@@ -1817,11 +1817,30 @@ static void compute_block_2(struct strip
- compute_parity6(sh, UPDATE_PARITY);
- return;
- } else {
-+#ifdef CONFIG_CNS3XXX_RAID
-+ void *ptrs[disks];
-+
-+ count = 0;
-+ i = d0_idx;
-+ do {
-+ ptrs[count++] = page_address(sh->dev[i].page);
-+ i = raid6_next_disk(i, disks);
-+ if (i != dd_idx1 && i != dd_idx2 &&
-+ !test_bit(R5_UPTODATE, &sh->dev[i].flags))
-+ printk
-+ ("compute_2 with missing block %d/%d\n",
-+ count, i);
-+ } while (i != d0_idx);
-+
-+ raid6_dataq_recov(disks, STRIPE_SIZE, faila, ptrs);
-+#else
-+
- /* We're missing D+Q; recompute D from P */
- compute_block_1(sh, ((dd_idx1 == sh->qd_idx) ?
- dd_idx2 : dd_idx1),
- 0);
- compute_parity6(sh, UPDATE_PARITY); /* Is this necessary? */
-+#endif /* CONFIG_CNS3XXX_RAID */
- return;
- }
- }
-@@ -5412,8 +5431,21 @@ static struct mdk_personality raid4_pers
- .quiesce = raid5_quiesce,
- };
-
-+#ifdef CONFIG_CNS3XXX_RAID
-+extern int calibrate_xor_blocks(void);
-+#endif /* CONFIG_CNS3XXX_RAID */
-+
- static int __init raid5_init(void)
- {
-+
-+#ifdef CONFIG_CNS3XXX_RAID
-+ /* Just execute calibrate xor blocks */
-+ int e;
-+ e = calibrate_xor_blocks();
-+ if (e)
-+ return e;
-+#endif /* CONFIG_CNS3XXX_RAID */
-+
- register_md_personality(&raid6_personality);
- register_md_personality(&raid5_personality);
- register_md_personality(&raid4_personality);
---- a/drivers/md/raid6algos.c
-+++ b/drivers/md/raid6algos.c
-@@ -49,6 +49,9 @@ extern const struct raid6_calls raid6_al
- extern const struct raid6_calls raid6_altivec2;
- extern const struct raid6_calls raid6_altivec4;
- extern const struct raid6_calls raid6_altivec8;
-+#ifdef CONFIG_CNS3XXX_RAID
-+extern const struct raid6_calls raid6_cns_raid;
-+#endif /* CONFIG_CNS3XXX_RAID */
-
- const struct raid6_calls * const raid6_algos[] = {
- &raid6_intx1,
-@@ -78,6 +81,11 @@ const struct raid6_calls * const raid6_a
- &raid6_altivec4,
- &raid6_altivec8,
- #endif
-+#ifdef CONFIG_CNS3XXX_RAID
-+ /* CNS3000 HW RAID acceleration */
-+ &raid6_cns_raid,
-+#endif /* CONFIG_CNS3XXX_RAID */
-+
- NULL
- };
-
-@@ -125,7 +133,9 @@ int __init raid6_select_algo(void)
- if ( !(*algo)->valid || (*algo)->valid() ) {
- perf = 0;
-
-+#ifndef CONFIG_CNS3XXX_RAID
- preempt_disable();
-+#endif
- j0 = jiffies;
- while ( (j1 = jiffies) == j0 )
- cpu_relax();
-@@ -134,7 +144,9 @@ int __init raid6_select_algo(void)
- (*algo)->gen_syndrome(disks, PAGE_SIZE, dptrs);
- perf++;
- }
-+#ifndef CONFIG_CNS3XXX_RAID
- preempt_enable();
-+#endif
-
- if ( (*algo)->prefer > bestprefer ||
- ((*algo)->prefer == bestprefer &&
---- /dev/null
-+++ b/drivers/md/raid6cns.c
-@@ -0,0 +1,38 @@
-+/*
-+ * raid6cns.c
-+ *
-+ * CNS3xxx xor & gen_syndrome functions
-+ *
-+ */
-+
-+#ifdef CONFIG_CNS3XXX_RAID
-+
-+#include <linux/raid/pq.h>
-+
-+extern void do_cns_rdma_gfgen(unsigned int src_no, unsigned int bytes, void **bh_ptr,
-+ void *p_dst, void *q_dst);
-+
-+/**
-+ * raid6_cnsraid_gen_syndrome - CNSRAID Syndrome Generate
-+ *
-+ * @disks: raid disks
-+ * @bytes: length
-+ * @ptrs: already arranged stripe ptrs,
-+ * disk0=[0], diskNNN=[disks-3],
-+ * P/Q=[z0+1] & [z0+2], or, [disks-2], [disks-1]
-+ */
-+static void raid6_cnsraid_gen_syndrome(int disks, size_t bytes, void **ptrs)
-+{
-+ do_cns_rdma_gfgen(disks - 2, bytes, ptrs, ptrs[disks-2], ptrs[disks-1]);
-+}
-+
-+const struct raid6_calls raid6_cns_raid = {
-+ raid6_cnsraid_gen_syndrome, /* callback */
-+ NULL, /* always valid */
-+ "CNS-RAID", /* name */
-+ 1 /* preferred: revise it to "0" to compare/compete with others algos */
-+};
-+
-+EXPORT_SYMBOL(raid6_cns_raid);
-+
-+#endif /* CONFIG_CNS3XXX_RAID */
---- a/drivers/md/raid6recov.c
-+++ b/drivers/md/raid6recov.c
-@@ -20,6 +20,136 @@
-
- #include <linux/raid/pq.h>
-
-+#ifdef CONFIG_CNS3XXX_RAID
-+#define R6_RECOV_PD 1
-+#define R6_RECOV_DD 2
-+#define R6_RECOV_DQ 3
-+extern void do_cns_rdma_gfgen_pd_dd_dq(unsigned int src_no, unsigned int bytes,
-+ void **bh_ptr, void *w1_dst,
-+ void *w2_dst, int pd_dd_qd,
-+ unsigned int w1_idx, unsigned int w2_idx,
-+ unsigned int *src_idx);
-+
-+/**
-+ * @disks: nr_disks
-+ * @bytes: len
-+ * @faila: 1st failed DD
-+ * @ptrs: ptrs by order {d0, d1, ..., da, ..., dn, P, Q}
-+ *
-+ * Desc:
-+ * new_read_ptrs = {d0, d1, ... dn, Q}
-+ * dd1 = faila
-+ * p_dst = P
-+ */
-+void raid6_datap_recov(int disks, size_t bytes, int faila, void **ptrs)
-+{
-+ int cnt = 0;
-+ int count = 0;
-+ void *p_dst, *q;
-+ void *dd1_dst;
-+ void *new_read_ptrs[disks - 2];
-+ unsigned int read_idx[disks - 2];
-+
-+ q = ptrs[disks - 1];
-+ p_dst = ptrs[disks - 2];
-+ dd1_dst = ptrs[faila];
-+
-+ while (cnt < disks) {
-+ if (cnt != faila && cnt != disks - 2) {
-+ new_read_ptrs[count] = ptrs[cnt];
-+ read_idx[count] = cnt;
-+ count++;
-+ }
-+ cnt++;
-+ }
-+
-+ do_cns_rdma_gfgen_pd_dd_dq(disks - 2, bytes,
-+ new_read_ptrs, p_dst, dd1_dst,
-+ R6_RECOV_PD, disks - 1, faila + 1, read_idx);
-+}
-+
-+/**
-+ * @disks: nr_disks
-+ * @bytes: len
-+ * @faila: 1st failed DD
-+ * @failb: 2nd failed DD
-+ * @ptrs: ptrs by order {d0, d1, ..., da, ..., db, ..., dn, P, Q}
-+ *
-+ * Desc:
-+ * new_read_ptrs = {d0, d1, ... dn, P, Q}
-+ * dd1_dst = faila
-+ * dd2_dst = failb
-+ */
-+void raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
-+ void **ptrs)
-+{
-+
-+ int cnt = 0;
-+ int count = 0;
-+ void *p, *q;
-+ void *dd1_dst, *dd2_dst;
-+ void *new_read_ptrs[disks - 2];
-+ unsigned int read_idx[disks - 2];
-+
-+ q = ptrs[disks - 1];
-+ p = ptrs[disks - 2];
-+ dd1_dst = ptrs[faila];
-+ dd2_dst = ptrs[failb];
-+
-+ while (cnt < disks) {
-+ if (cnt != faila && cnt != failb) {
-+ new_read_ptrs[count] = ptrs[cnt];
-+ read_idx[count] = cnt;
-+ count++;
-+ }
-+ cnt++;
-+ }
-+
-+ do_cns_rdma_gfgen_pd_dd_dq(disks - 2, bytes,
-+ new_read_ptrs, dd1_dst, dd2_dst,
-+ R6_RECOV_DD, faila + 1, failb + 1, read_idx);
-+}
-+
-+/**
-+ * @disks: nr_disks
-+ * @bytes: len
-+ * @faila: 1st failed DD
-+ * @ptrs: ptrs by order {d0, d1, ..., da, ..., dn, P, Q}
-+ *
-+ * Desc:
-+ * new_read_ptrs = {d0, d1, ... dn, P}
-+ * dd1 = faila
-+ * q_dst = Q
-+ */
-+void raid6_dataq_recov(int disks, size_t bytes, int faila, void **ptrs)
-+{
-+ int cnt = 0;
-+ int count = 0;
-+ void *q_dst, *p;
-+ void *dd1_dst;
-+ void *new_read_ptrs[disks - 2];
-+ unsigned int read_idx[disks - 2];
-+
-+ p = ptrs[disks - 2];
-+ q_dst = ptrs[disks - 1];
-+ dd1_dst = ptrs[faila];
-+
-+ while (cnt < disks) {
-+ if (cnt != faila && cnt != disks - 1) {
-+ new_read_ptrs[count] = ptrs[cnt];
-+ read_idx[count] = cnt;
-+ count++;
-+ }
-+ cnt++;
-+ }
-+
-+ do_cns_rdma_gfgen_pd_dd_dq(disks - 2, bytes,
-+ new_read_ptrs, dd1_dst, q_dst,
-+ R6_RECOV_DQ, faila + 1, disks, read_idx);
-+}
-+
-+#else /* CONFIG_CNS3XXX_RAID
-+
- /* Recover two failed data blocks. */
- void raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
- void **ptrs)
-@@ -96,6 +226,7 @@ void raid6_datap_recov(int disks, size_t
- }
- }
- EXPORT_SYMBOL_GPL(raid6_datap_recov);
-+#endif /* CONFIG_CNS3XXX_RAID */
-
- #ifndef __KERNEL__
- /* Testing only */
---- a/include/linux/raid/pq.h
-+++ b/include/linux/raid/pq.h
-@@ -100,6 +100,9 @@ void raid6_2data_recov(int disks, size_t
- void raid6_datap_recov(int disks, size_t bytes, int faila, void **ptrs);
- void raid6_dual_recov(int disks, size_t bytes, int faila, int failb,
- void **ptrs);
-+#ifdef CONFIG_CNS3XXX_RAID
-+void raid6_dataq_recov(int disks, size_t bytes, int faila, void **ptrs);
-+#endif /* CONFIG_CNS3XXX_RAID */
-
- /* Some definitions to allow code to be compiled for testing in userspace */
- #ifndef __KERNEL__
---- a/include/linux/raid/xor.h
-+++ b/include/linux/raid/xor.h
-@@ -1,7 +1,11 @@
- #ifndef _XOR_H
- #define _XOR_H
-
-+#ifdef CONFIG_CNS3XXX_RAID
-+#define MAX_XOR_BLOCKS 32
-+#else
- #define MAX_XOR_BLOCKS 4
-+#endif /* CONFIG_CNS3XXX_RAID */
-
- extern void xor_blocks(unsigned int count, unsigned int bytes,
- void *dest, void **srcs);
---- a/mm/mempool.c
-+++ b/mm/mempool.c
-@@ -250,6 +250,28 @@ repeat_alloc:
- }
- EXPORT_SYMBOL(mempool_alloc);
-
-+#ifdef CONFIG_CNS3XXX_RAID
-+/**
-+ * acs_mempool_alloc - allocate an element from a specific memory pool
-+ * @pool: pointer to the memory pool which was allocated via
-+ * mempool_create().
-+ *
-+ * this function differs from mempool_alloc by directly allocating an element
-+ * from @pool without calling @pool->alloc().
-+ */
-+void *acs_mempool_alloc(mempool_t * pool)
-+{
-+ unsigned long flags;
-+ void *element = NULL;
-+
-+ spin_lock_irqsave(&pool->lock, flags);
-+ if (likely(pool->curr_nr))
-+ element = remove_element(pool);
-+ spin_unlock_irqrestore(&pool->lock, flags);
-+ return element;
-+}
-+#endif /* CONFIG_CNS3XXX_RAID */
-+
- /**
- * mempool_free - return an element to the pool.
- * @element: pool element pointer.
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -236,6 +236,39 @@ config SPI_XILINX
- See the "OPB Serial Peripheral Interface (SPI) (v1.00e)"
- Product Specification document (DS464) for hardware details.
-
-+config SPI_CNS3XXX
-+ tristate "CNS3XXX SPI controller"
-+ depends on ARCH_CNS3XXX && SPI_MASTER && EXPERIMENTAL
-+ select SPI_BITBANG
-+ help
-+ This enables using the CNS3XXX SPI controller in master
-+ mode.
-+
-+config SPI_CNS3XXX_DEBUG
-+ boolean "Debug support for CNS3XXX SPI drivers"
-+ depends on SPI_CNS3XXX
-+ help
-+ Say "yes" to enable debug messaging
-+
-+config SPI_CNS3XXX_2IOREAD
-+ bool "CNS3XXX SPI 2 IO Read Mode"
-+ depends on SPI_CNS3XXX
-+ help
-+ This enables 2 IO Read Mode
-+
-+config SPI_CNS3XXX_USEDMA
-+ bool "CNS3XXX SPI DMA Mode"
-+ depends on SPI_CNS3XXX
-+ select CNS3XXX_DMAC
-+ help
-+ This enables DMA Mode
-+
-+config SPI_CNS3XXX_USEDMA_DEBUG
-+ boolean "Debug support for CNS3XXX SPI DMA drivers"
-+ depends on SPI_CNS3XXX_USEDMA
-+ help
-+ Say "yes" to enable debug messaging
-+
- #
- # Add new SPI master controllers in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24x
- obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
- obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
- obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
-+obj-$(CONFIG_SPI_CNS3XXX) += spi_cns3xxx.o
- # ... add above this line ...
-
- # SPI protocol drivers (device/link on bus)
---- a/drivers/spi/spi_bitbang.c
-+++ b/drivers/spi/spi_bitbang.c
-@@ -334,6 +334,14 @@ static void bitbang_work(struct work_str
- */
- if (!m->is_dma_mapped)
- t->rx_dma = t->tx_dma = 0;
-+
-+#ifdef CONFIG_ARCH_CNS3XXX
-+ if (t->transfer_list.next == &m->transfers) {
-+ t->last_in_message_list = 1;
-+ } else {
-+ t->last_in_message_list = 0;
-+ }
-+#endif
- status = bitbang->txrx_bufs(spi, t);
- }
- if (status > 0)
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -769,6 +769,89 @@ int spi_write_then_read(struct spi_devic
- }
- EXPORT_SYMBOL_GPL(spi_write_then_read);
-
-+#ifdef CONFIG_ARCH_CNS3XXX
-+/**
-+ * spi_write_read_sync - SPI synchronous write & read
-+ * @spi: device with which data will be exchanged
-+ * @txbuf: data to be written (need not be dma-safe)
-+ * @n_tx: size of txbuf, in bytes
-+ * @rxbuf: buffer into which data will be read
-+ * @n_rx: size of rxbuf, in bytes (need not be dma-safe)
-+ *
-+ * This performs a half duplex MicroWire style transaction with the
-+ * device, sending txbuf and then reading rxbuf. The return value
-+ * is zero for success, else a negative errno status code.
-+ * This call may only be used from a context that may sleep.
-+ *
-+ * Parameters to this routine are always copied using a small buffer;
-+ * performance-sensitive or bulk transfer code should instead use
-+ * spi_{async,sync}() calls with dma-safe buffers.
-+ */
-+int spi_write_read_sync(struct spi_device *spi,
-+ const u8 *txbuf, unsigned n_tx,
-+ u8 *rxbuf, unsigned n_rx)
-+{
-+ static DECLARE_MUTEX(lock);
-+
-+ int status;
-+ struct spi_message message;
-+ struct spi_transfer x;
-+ u8 *local_buf;
-+
-+ /* Use preallocated DMA-safe buffer. We can't avoid copying here,
-+ * (as a pure convenience thing), but we can keep heap costs
-+ * out of the hot path ...
-+ */
-+#if 0
-+ while (!str8131_spi_bus_idle()){
-+ printk("spi bus is not idle \n"); // do nothing
-+ }
-+ while (!str8131_spi_tx_buffer_empty()){
-+ printk("spi tx buffer is not empty \n"); // do nothing
-+ }
-+#endif
-+ if ((n_tx + n_rx) > SPI_BUFSIZ)
-+ return -EINVAL;
-+ spi_message_init(&message);
-+ memset(&x, 0, sizeof x);
-+ x.len = n_tx;
-+ spi_message_add_tail(&x, &message);
-+
-+ /* ... unless someone else is using the pre-allocated buffer */
-+ if (down_trylock(&lock)) {
-+ local_buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL);
-+ if (!local_buf)
-+ return -ENOMEM;
-+ } else
-+ local_buf = buf;
-+
-+ memcpy(local_buf, txbuf, n_tx);
-+ x.tx_buf = local_buf;
-+ x.rx_buf = local_buf + n_tx;
-+
-+ /* do the i/o */
-+ status = spi_sync(spi, &message);
-+ if (status == 0) {
-+ memcpy(rxbuf, x.rx_buf, n_rx);
-+ status = message.status;
-+ }
-+
-+ if (x.tx_buf == buf)
-+ up(&lock);
-+ else
-+ kfree(local_buf);
-+
-+ return status;
-+}
-+
-+EXPORT_SYMBOL_GPL(spi_write_read_sync);
-+#endif /* CONFIG_ARCH_CNS3XXX */
-+
-+
-+
-+
-+
-+
- /*-------------------------------------------------------------------------*/
-
- static int __init spi_init(void)
---- /dev/null
-+++ b/drivers/spi/spi_cns3xxx.c
-@@ -0,0 +1,878 @@
-+/*******************************************************************************
-+ *
-+ * CNS3XXX SPI controller driver (master mode only)
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ *
-+ ******************************************************************************/
-+
-+#include <linux/init.h>
-+#include <linux/spinlock.h>
-+#include <linux/workqueue.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/errno.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/io.h>
-+#include <asm/memory.h>
-+#include <asm/dma.h>
-+#include <asm/delay.h>
-+#include <mach/board.h>
-+#include <mach/dmac.h>
-+#include <linux/module.h>
-+#include <mach/misc.h>
-+#include <mach/gpio.h>
-+#include <mach/pm.h>
-+
-+#define LE8221_SPI_CS 1
-+#define SI3226_SPI_CS 1
-+
-+#define CNS3XXX_SPI_INTERRUPT
-+#undef CNS3XXX_SPI_INTERRUPT /* Interrupt is not supported for D2 and SEN */
-+
-+/*
-+ * define access macros
-+ */
-+#define SPI_MEM_MAP_VALUE(reg_offset) (*((u32 volatile *)(CNS3XXX_SSP_BASE_VIRT + reg_offset)))
-+
-+#define SPI_CONFIGURATION_REG SPI_MEM_MAP_VALUE(0x40)
-+#define SPI_SERVICE_STATUS_REG SPI_MEM_MAP_VALUE(0x44)
-+#define SPI_BIT_RATE_CONTROL_REG SPI_MEM_MAP_VALUE(0x48)
-+#define SPI_TRANSMIT_CONTROL_REG SPI_MEM_MAP_VALUE(0x4C)
-+#define SPI_TRANSMIT_BUFFER_REG SPI_MEM_MAP_VALUE(0x50)
-+#define SPI_RECEIVE_CONTROL_REG SPI_MEM_MAP_VALUE(0x54)
-+#define SPI_RECEIVE_BUFFER_REG SPI_MEM_MAP_VALUE(0x58)
-+#define SPI_FIFO_TRANSMIT_CONFIG_REG SPI_MEM_MAP_VALUE(0x5C)
-+#define SPI_FIFO_TRANSMIT_CONTROL_REG SPI_MEM_MAP_VALUE(0x60)
-+#define SPI_FIFO_RECEIVE_CONFIG_REG SPI_MEM_MAP_VALUE(0x64)
-+#define SPI_INTERRUPT_STATUS_REG SPI_MEM_MAP_VALUE(0x68)
-+#define SPI_INTERRUPT_ENABLE_REG SPI_MEM_MAP_VALUE(0x6C)
-+
-+#define SPI_TRANSMIT_BUFFER_REG_ADDR (CNS3XXX_SSP_BASE +0x50)
-+#define SPI_RECEIVE_BUFFER_REG_ADDR (CNS3XXX_SSP_BASE +0x58)
-+
-+/* Structure for SPI controller of CNS3XXX SOCs */
-+struct cns3xxx_spi {
-+ /* bitbang has to be first */
-+ struct spi_bitbang bitbang;
-+ struct completion done;
-+ wait_queue_head_t wait;
-+
-+ int len;
-+ int count;
-+ int last_in_message_list;
-+
-+ /* data buffers */
-+ const unsigned char *tx;
-+ unsigned char *rx;
-+
-+ struct spi_master *master;
-+ struct platform_device *pdev;
-+ struct device *dev;
-+};
-+
-+static inline u8 cns3xxx_spi_bus_idle(void)
-+{
-+ return ((SPI_SERVICE_STATUS_REG & 0x1) ? 0 : 1);
-+}
-+
-+static inline u8 cns3xxx_spi_tx_buffer_empty(void)
-+{
-+ return ((SPI_INTERRUPT_STATUS_REG & (0x1 << 3)) ? 1 : 0);
-+}
-+
-+static inline u8 cns3xxx_spi_rx_buffer_full(void)
-+{
-+ return ((SPI_INTERRUPT_STATUS_REG & (0x1 << 2)) ? 1 : 0);
-+}
-+
-+u8 cns3xxx_spi_tx_rx(u8 tx_channel, u8 tx_eof, u32 tx_data,
-+ u32 * rx_data)
-+{
-+ u8 rx_channel;
-+ u8 rx_eof;
-+
-+ while (!cns3xxx_spi_bus_idle()) ; // do nothing
-+
-+ while (!cns3xxx_spi_tx_buffer_empty()) ; // do nothing
-+
-+ SPI_TRANSMIT_CONTROL_REG &= ~(0x7);
-+ SPI_TRANSMIT_CONTROL_REG |= (tx_channel & 0x3) | ((tx_eof & 0x1) << 2);
-+
-+ SPI_TRANSMIT_BUFFER_REG = tx_data;
-+
-+ while (!cns3xxx_spi_rx_buffer_full()) ; // do nothing
-+
-+ rx_channel = SPI_RECEIVE_CONTROL_REG & 0x3;
-+ rx_eof = (SPI_RECEIVE_CONTROL_REG & (0x1 << 2)) ? 1 : 0;
-+
-+ *rx_data = SPI_RECEIVE_BUFFER_REG;
-+
-+ if ((tx_channel != rx_channel) || (tx_eof != rx_eof)) {
-+ return 0;
-+ } else {
-+ return 1;
-+ }
-+}
-+
-+u8 cns3xxx_spi_tx(u8 tx_channel, u8 tx_eof, u32 tx_data)
-+{
-+
-+ while (!cns3xxx_spi_bus_idle()) ; // do nothing
-+
-+ while (!cns3xxx_spi_tx_buffer_empty()) ; // do nothing
-+
-+ SPI_TRANSMIT_CONTROL_REG &= ~(0x7);
-+ SPI_TRANSMIT_CONTROL_REG |= (tx_channel & 0x3) | ((tx_eof & 0x1) << 2);
-+
-+ SPI_TRANSMIT_BUFFER_REG = tx_data;
-+
-+ return 1;
-+}
-+
-+
-+
-+#ifdef CONFIG_SPI_CNS3XXX_DEBUG
-+static void spi_slave_probe(void)
-+{
-+ int i;
-+ u32 rx_data1, rx_data2, rx_data3;
-+
-+ cns3xxx_spi_tx_rx(0, 0, 0x9f, &rx_data1);
-+ cns3xxx_spi_tx_rx(0, 0, 0xff, &rx_data1);
-+ cns3xxx_spi_tx_rx(0, 0, 0xff, &rx_data2);
-+ cns3xxx_spi_tx_rx(0, 1, 0xff, &rx_data3);
-+ printk("[SPI_CNS3XXX_DEBUG] manufacturer: %x\n", rx_data1);
-+ printk("[SPI_CNS3XXX_DEBUG] device: %x\n",
-+ ((rx_data2 & 0xff) << 8) | (u16) (rx_data3 & 0xff));
-+
-+ cns3xxx_spi_tx_rx(0, 0, 0x03, &rx_data1);
-+ cns3xxx_spi_tx_rx(0, 0, 0x00, &rx_data1);
-+ cns3xxx_spi_tx_rx(0, 0, 0x00, &rx_data1);
-+ cns3xxx_spi_tx_rx(0, 0, 0x00, &rx_data1);
-+ for (i = 0; i < 15; i++) {
-+ cns3xxx_spi_tx_rx(0, 0, 0xff, &rx_data1);
-+ printk("[SPI_CNS3XXX_DEBUG] flash[%02d]:0x%02x\n", i,
-+ rx_data1 & 0xff);
-+ }
-+ cns3xxx_spi_tx_rx(0, 1, 0xff, &rx_data1);
-+ printk("[SPI_CNS3XXX_DEBUG] flash[%02d]:0x%02x\n", i, rx_data1 & 0xff);
-+}
-+#else
-+#define spi_slave_probe() do{}while(0)
-+#endif
-+
-+static inline struct cns3xxx_spi *to_hw(struct spi_device *sdev)
-+{
-+ return spi_master_get_devdata(sdev->master);
-+}
-+
-+static int cns3xxx_spi_setup_transfer(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ return 0;
-+}
-+
-+static void cns3xxx_spi_chipselect(struct spi_device *spi, int value)
-+{
-+ unsigned int spi_config;
-+
-+ switch (value) {
-+ case BITBANG_CS_INACTIVE:
-+ break;
-+
-+ case BITBANG_CS_ACTIVE:
-+ spi_config = SPI_CONFIGURATION_REG;
-+
-+ if (spi->mode & SPI_CPHA)
-+ spi_config |= (0x1 << 13);
-+ else
-+ spi_config &= ~(0x1 << 13);
-+
-+ if (spi->mode & SPI_CPOL)
-+ spi_config |= (0x1 << 14);
-+ else
-+ spi_config &= ~(0x1 << 14);
-+
-+ /* write new configration */
-+ SPI_CONFIGURATION_REG = spi_config;
-+
-+ SPI_TRANSMIT_CONTROL_REG &= ~(0x7);
-+ SPI_TRANSMIT_CONTROL_REG |= (spi->chip_select & 0x3);
-+
-+#if defined(CONFIG_LE8221_CONTROL)
-+ if (spi->chip_select == LE8221_SPI_CS) {
-+ SPI_CONFIGURATION_REG |= (0x1 << 9);
-+ }
-+#elif defined (CONFIG_SI3226_CONTROL_API)
-+ if (spi->chip_select == SI3226_SPI_CS) {
-+ SPI_CONFIGURATION_REG &= ~(0x1 << 9);
-+ }
-+#endif
-+ break;
-+ }
-+}
-+
-+static int cns3xxx_spi_setup(struct spi_device *spi)
-+{
-+ if (!spi->bits_per_word)
-+ spi->bits_per_word = 8;
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_SPI_CNS3XXX_USEDMA
-+
-+int cns3xxx_spi_dma_irq_handler(void *pdata)
-+{
-+
-+ struct cns3xxx_spi *hw = pdata;
-+ complete(&hw->done);
-+
-+ return 0;
-+}
-+
-+static int cns3xxx_spi_dma_initialize(int *rxchan, int *txchan, int *rxevtno,
-+ int *txevtno, void *handlerargs)
-+{
-+ *rxchan = dmac_get_channel(cns3xxx_spi_dma_irq_handler, handlerargs);
-+ if ((*rxchan) == -1)
-+ goto fail1;
-+ *txchan = dmac_get_channel(NULL, NULL);
-+ if ((*txchan) == -1)
-+ goto fail2;
-+ *rxevtno = 9;
-+ if (dmac_get_event(*rxchan, *rxevtno) == -1)
-+ goto fail3;
-+ *txevtno = 10;
-+ if (dmac_get_event(*txchan, *txevtno) == -1)
-+ goto fail4;
-+ return 0;
-+
-+fail4:
-+ dmac_release_event(*rxchan, *rxevtno);
-+fail3:
-+ dmac_release_channel(*txchan);
-+fail2:
-+ dmac_release_channel(*rxchan);
-+fail1:
-+ return -1;
-+}
-+
-+static int cns3xxx_spi_start_dma(int rch, int tch, int rev, int tev,
-+ struct spi_transfer *t, struct cns3xxx_spi *hw)
-+{
-+ static void *dummy;
-+ static dma_addr_t dummy_dma;
-+ dma_addr_t rdma, tdma;
-+ int rx_inc, tx_inc;
-+ int lc0, totlps, lc1, rump;
-+ u32 rx_data;
-+
-+ if (!dummy) {
-+ dummy = dma_alloc_coherent(NULL, 16, &dummy_dma, GFP_KERNEL);
-+#ifdef CONFIG_SPI_CNS3XXX_DEBUG_DMA
-+ printk("Allocated Memory for dummy buffer va:%p,pa:%x\n", dummy,
-+ dummy_dma);
-+#endif
-+ }
-+ if (!dummy) {
-+ return -1;
-+ }
-+ *((uint32_t *) dummy) = 0xffffffff;
-+
-+ (t->tx_buf) ? (tdma = t->tx_dma, tx_inc = 1) :
-+ (tdma = dummy_dma, tx_inc = 0);
-+ (t->rx_buf) ? (rdma = t->rx_dma, rx_inc = 1) :
-+ (rdma = dummy_dma, rx_inc = 0);
-+
-+#ifdef CONFIG_SPI_CNS3XXX_DEBUG_DMA
-+ printk("Here with tdma %x, rdma %x\n", tdma, rdma);
-+#endif
-+
-+ if(t->len < 3) {
-+ if(t->len == 2){
-+ cns3xxx_spi_tx_rx(0,0,(t->tx_buf) ? hw->tx[0] : 0xff ,&rx_data);
-+ if(!(t->tx_buf))
-+ hw->rx[0] = rx_data & 0xff;
-+ }
-+ cns3xxx_spi_dma_irq_handler(hw);
-+ return 0;
-+ }
-+
-+
-+ totlps = t->len - 1 -1;
-+ if (totlps > 0x100) {
-+ lc0 = 0x100;
-+ lc1 = totlps / lc0;
-+ rump = totlps % lc0;
-+ } else {
-+ lc0 = totlps;
-+ lc1 = 0;
-+ rump = 0;
-+ }
-+
-+ if(t->tx_buf) {
-+ cns3xxx_spi_tx(0,0,*((uint32_t *) t->tx_buf));
-+ tdma+=1;
-+ }
-+ else {
-+ cns3xxx_spi_tx(0,0,0xff);
-+ }
-+
-+ //SPI_RECEIVE_BUFFER_REG;
-+ {
-+ DMAC_DMAMOV(tch, SAR, tdma);
-+ DMAC_DMAMOV(tch, DAR, SPI_TRANSMIT_BUFFER_REG_ADDR);
-+ DMAC_DMAMOV(tch, CCR,
-+ dmac_create_ctrlval(tx_inc, 1, 1, 0, 1, 1, 0));
-+ //DMAC_WFE(tch, rev);
-+ if (lc1)
-+ DMAC_DMALP(tch, 1, lc1);
-+ DMAC_DMALP(tch, 0, lc0);
-+ DMAC_WFE(tch, rev);
-+ DMAC_DMALDS(tch);
-+ DMAC_DMASTS(tch);
-+ DMAC_DMAWMB(tch);
-+ DMAC_DMASEV(tch, tev);
-+ DMAC_DMALPEND(tch, 0,
-+ DMAWFE_INSTR_SIZE + DMASEV_INSTR_SIZE +
-+ DMAWMB_INSTR_SIZE + DMAST_INSTR_SIZE +
-+ DMALD_INSTR_SIZE, 1);
-+ if (lc1)
-+ DMAC_DMALPEND(tch, 1,
-+ DMALP_INSTR_SIZE + DMALPEND_INSTR_SIZE +
-+ DMAWFE_INSTR_SIZE + DMASEV_INSTR_SIZE +
-+ DMAWMB_INSTR_SIZE + DMAST_INSTR_SIZE +
-+ DMALD_INSTR_SIZE, 1);
-+
-+ if (rump) {
-+ DMAC_DMALP(tch, 0, rump);
-+ DMAC_WFE(tch, rev);
-+ DMAC_DMALDS(tch);
-+ DMAC_DMASTS(tch);
-+ DMAC_DMAWMB(tch);
-+ DMAC_DMASEV(tch, tev);
-+ DMAC_DMALPEND(tch, 0,
-+ DMAWFE_INSTR_SIZE + DMASEV_INSTR_SIZE +
-+ DMAWMB_INSTR_SIZE + DMAST_INSTR_SIZE +
-+ DMALD_INSTR_SIZE, 1);
-+ }
-+
-+
-+ DMAC_DMAEND(tch);
-+ DMAC_DMAGO(tch);
-+ }
-+ {
-+ DMAC_DMAMOV(rch, SAR, SPI_RECEIVE_BUFFER_REG_ADDR);
-+ DMAC_DMAMOV(rch, DAR, rdma);
-+ DMAC_DMAMOV(rch, CCR,
-+ dmac_create_ctrlval(0, 1, 1, rx_inc, 1, 1, 0));
-+
-+ if (lc1)
-+ DMAC_DMALP(rch, 1, lc1);
-+ DMAC_DMALP(rch, 0, lc0);
-+ DMAC_DMAWFP(rch, DMAC_SPI_PERIPH_ID, PERIPHERAL);
-+ DMAC_DMALDP(rch, DMAC_SPI_PERIPH_ID, 0);
-+ DMAC_DMASTS(rch);
-+ DMAC_DMAWMB(rch);
-+ DMAC_DMASEV(rch, rev);
-+ DMAC_WFE(rch, tev);
-+ DMAC_DMALPEND(rch, 0,
-+ DMAWFE_INSTR_SIZE + DMASEV_INSTR_SIZE +
-+ DMAWMB_INSTR_SIZE + DMAST_INSTR_SIZE +
-+ DMALDP_INSTR_SIZE + DMAWFP_INSTR_SIZE, 1);
-+ if (lc1)
-+ DMAC_DMALPEND(rch, 1,
-+ DMAWFE_INSTR_SIZE +
-+ DMASEV_INSTR_SIZE + DMAWMB_INSTR_SIZE +
-+ DMAST_INSTR_SIZE + DMALDP_INSTR_SIZE +
-+ DMAWFP_INSTR_SIZE + DMALP_INSTR_SIZE +
-+ DMALPEND_INSTR_SIZE, 1);
-+
-+
-+ if (rump) {
-+ DMAC_DMALP(rch, 0, rump);
-+ DMAC_DMAWFP(rch, DMAC_SPI_PERIPH_ID, PERIPHERAL);
-+ DMAC_DMALDP(rch, DMAC_SPI_PERIPH_ID, 0);
-+ DMAC_DMASTS(rch);
-+ DMAC_DMAWMB(rch);
-+ DMAC_DMASEV(rch, rev);
-+ DMAC_WFE(rch, tev);
-+ DMAC_DMALPEND(rch, 0,
-+ DMAWFE_INSTR_SIZE +
-+ DMASEV_INSTR_SIZE + DMAWMB_INSTR_SIZE +
-+ DMAST_INSTR_SIZE + DMALDP_INSTR_SIZE +
-+ DMAWFP_INSTR_SIZE, 1);
-+ }
-+ // extra RX
-+ DMAC_DMAWFP(rch, DMAC_SPI_PERIPH_ID, PERIPHERAL);
-+ DMAC_DMALDP(rch, DMAC_SPI_PERIPH_ID, 0);
-+ DMAC_DMASTS(rch);
-+ DMAC_DMAWMB(rch);
-+
-+ DMAC_DMAFLUSHP(rch, DMAC_SPI_PERIPH_ID);
-+ DMAC_DMASEV(rch, rch); // This will generate an interrupt
-+ DMAC_DMAEND(rch);
-+ DMAC_DMAGO(rch);
-+ }
-+ return 0;
-+}
-+
-+static void cns3xxx_spi_dma_uninitialize(int rch, int tch, int revt, int tevt)
-+{
-+ dmac_release_event(rch, revt);
-+ dmac_release_event(tch, tevt);
-+ dmac_release_channel(rch);
-+ dmac_release_channel(tch);
-+ return;
-+}
-+
-+#endif /* CONFIG_SPI_CNS3XXX_USEDMA */
-+
-+static int cns3xxx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
-+{
-+ struct cns3xxx_spi *hw = to_hw(spi);
-+#ifdef CONFIG_SPI_CNS3XXX_USEDMA
-+ int spi_rxchan, spi_txchan, spi_rxevt, spi_txevt;
-+ int rx_data;
-+#endif
-+ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", t->tx_buf, t->rx_buf,
-+ t->len);
-+
-+ hw->tx = t->tx_buf;
-+ hw->rx = t->rx_buf;
-+ hw->len = t->len;
-+ hw->count = 0;
-+ hw->last_in_message_list = t->last_in_message_list;
-+
-+#ifdef CONFIG_SPI_CNS3XXX_USEDMA
-+ init_completion(&hw->done);
-+
-+ if (cns3xxx_spi_dma_initialize
-+ (&spi_rxchan, &spi_txchan, &spi_rxevt, &spi_txevt, hw)) {
-+ dev_dbg(&spi->dev, "%s:%d Could not initialize DMA. \n",
-+ __FUNCTION__, __LINE__);
-+ return 0;
-+ }
-+
-+ if (t->tx_buf)
-+ t->tx_dma =
-+ dma_map_single(NULL, t->tx_buf, t->len, DMA_TO_DEVICE);
-+ if (t->rx_buf)
-+ t->rx_dma =
-+ dma_map_single(NULL, t->rx_buf, t->len, DMA_FROM_DEVICE);
-+
-+ if (cns3xxx_spi_start_dma
-+ (spi_rxchan, spi_txchan, spi_rxevt, spi_txevt, t, hw)) {
-+ dev_dbg(&spi->dev, "Could not start DMA. \n");
-+ if (t->tx_buf)
-+ dma_unmap_single(NULL, t->tx_dma, t->len,
-+ DMA_TO_DEVICE);
-+ t->tx_dma = 0;
-+ if (t->rx_buf)
-+ dma_unmap_single(NULL, t->rx_dma, t->len,
-+ DMA_FROM_DEVICE);
-+ t->rx_dma = 0;
-+ cns3xxx_spi_dma_uninitialize(spi_rxchan, spi_txchan, spi_rxevt,
-+ spi_txevt);
-+ return 0;
-+ }
-+
-+ wait_for_completion(&hw->done);
-+
-+ dev_dbg(&spi->dev, "DMA reported completion of transfer of %d bytes\n",
-+ t->len - 1);
-+
-+ if (t->tx_buf)
-+ dma_unmap_single(NULL, t->tx_dma, t->len, DMA_TO_DEVICE);
-+ t->tx_dma = 0;
-+ if (t->rx_buf)
-+ dma_unmap_single(NULL, t->rx_dma, t->len, DMA_FROM_DEVICE);
-+ t->rx_dma = 0;
-+ cns3xxx_spi_dma_uninitialize(spi_rxchan, spi_txchan, spi_rxevt,
-+ spi_txevt);
-+
-+ if (t->last_in_message_list)
-+ cns3xxx_spi_tx_rx(spi->chip_select, 1,
-+ (hw->tx) ? hw->tx[hw->len - 1] : 0xff,
-+ &rx_data);
-+ else
-+ cns3xxx_spi_tx_rx(spi->chip_select, 0,
-+ (hw->tx) ? hw->tx[hw->len - 1] : 0xff,
-+ &rx_data);
-+
-+ if (hw->rx)
-+ hw->rx[hw->len - 1] = rx_data & 0xff;
-+
-+ return hw->len;
-+
-+#else /* !CONFIG_SPI_CNS3XXX_USEDMA */
-+
-+#ifdef CNS3XXX_SPI_INTERRUPT
-+
-+ init_completion(&hw->done);
-+
-+ /* Effectively, we are enabling only the Receive Buffer Interrupt Enable */
-+ /* TX Buf Underrun and RX Buf Overrun are not to happen */
-+ SPI_INTERRUPT_ENABLE_REG = (0x1 << 2);
-+// (0x0) | (0x1 << 2) | (0x0 << 3) | (0x1 << 6) | (0x1 << 7);
-+
-+ /* Write data and wait for completion */
-+ SPI_TRANSMIT_CONTROL_REG &= ~(0x7);
-+ SPI_TRANSMIT_CONTROL_REG |= (spi->chip_select & 0x3) |
-+ ((((hw->last_in_message_list) && (hw->len == 1)) ? 0x1 : 0x0) << 2);
-+
-+ SPI_TRANSMIT_BUFFER_REG = (hw->tx) ? hw->tx[hw->count] : 0xff;
-+
-+ wait_for_completion(&hw->done);
-+
-+ SPI_INTERRUPT_ENABLE_REG = 0;
-+
-+ return hw->count;
-+
-+#else /* !CNS3XXX_SPI_INTERRUPT */
-+
-+ init_completion(&hw->done);
-+
-+ if (hw->tx) {
-+ int i;
-+ u32 rx_data;
-+ for (i = 0; i < (hw->len - 1); i++) {
-+ dev_dbg(&spi->dev,
-+ "[SPI_CNS3XXX_DEBUG] hw->tx[%02d]: 0x%02x\n", i,
-+ hw->tx[i]);
-+ cns3xxx_spi_tx_rx(spi->chip_select, 0, hw->tx[i],
-+ &rx_data);
-+ if (hw->rx) {
-+ hw->rx[i] = rx_data;
-+ dev_dbg(&spi->dev,
-+ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n",
-+ i, hw->rx[i]);
-+ }
-+ }
-+
-+ if (t->last_in_message_list) {
-+ cns3xxx_spi_tx_rx(spi->chip_select, 1, hw->tx[i],
-+ &rx_data);
-+ if (hw->rx) {
-+ hw->rx[i] = rx_data;
-+ dev_dbg(&spi->dev,
-+ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n",
-+ i, hw->rx[i]);
-+ }
-+ } else {
-+ cns3xxx_spi_tx_rx(spi->chip_select, 0, hw->tx[i],
-+ &rx_data);
-+ }
-+ goto done;
-+ }
-+
-+ if (hw->rx) {
-+ int i;
-+ u32 rx_data;
-+ for (i = 0; i < (hw->len - 1); i++) {
-+ cns3xxx_spi_tx_rx(spi->chip_select, 0, 0xff, &rx_data);
-+ hw->rx[i] = rx_data;
-+ dev_dbg(&spi->dev,
-+ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n", i,
-+ hw->rx[i]);
-+ }
-+
-+ if (t->last_in_message_list) {
-+ cns3xxx_spi_tx_rx(spi->chip_select, 1, 0xff, &rx_data);
-+ } else {
-+ cns3xxx_spi_tx_rx(spi->chip_select, 0, 0xff, &rx_data);
-+ }
-+ hw->rx[i] = rx_data;
-+ dev_dbg(&spi->dev, "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n",
-+ i, hw->rx[i]);
-+ }
-+done:
-+ return hw->len;
-+
-+#endif /* CNS3XXX_SPI_INTERRUPT */
-+
-+#endif /* CONFIG_SPI_CNS3XXX_USEDMA */
-+}
-+
-+#ifdef CNS3XXX_SPI_INTERRUPT
-+/* Driver supports single master only.
-+ * We have disabled fifo, so we wait for the receive buff full interrupt.
-+ * Receive Buff overrun, transmit buff underrun are not to happen
-+ */
-+static irqreturn_t cns3xxx_spi_irq(int irq, void *dev)
-+{
-+ struct cns3xxx_spi *hw = dev;
-+ uint32_t int_status;
-+ uint8_t data;
-+ unsigned int count = hw->count;
-+
-+ /* Read the interrupt status and clear interrupt */
-+ int_status = SPI_INTERRUPT_STATUS_REG;
-+
-+ if (!(int_status & (0x1 << 2))) {
-+ printk("DEBUG THIS ! Unexpected interrupt (status = 0x%x)", int_status);
-+ /* Clearing spurious interrupts */
-+ SPI_INTERRUPT_STATUS_REG = (0xF << 4);
-+ goto irq_done;
-+ }
-+
-+ /* Read to clear */
-+ data = SPI_RECEIVE_BUFFER_REG & 0xff;
-+
-+ if (hw->rx)
-+ hw->rx[hw->count] = data;
-+
-+ hw->count++;
-+ hw->len--;
-+
-+ if (hw->len) {
-+ SPI_TRANSMIT_CONTROL_REG |=
-+ ((((hw->last_in_message_list) && (hw->len == 1)) ? 0x1 : 0x0) << 2);
-+ SPI_TRANSMIT_BUFFER_REG = (hw->tx) ? hw->tx[hw->count] : 0xff;
-+ } else {
-+ complete(&hw->done);
-+ }
-+
-+irq_done:
-+ return IRQ_HANDLED;
-+}
-+#endif
-+
-+static void __init cns3xxx_spi_initial(void)
-+{
-+
-+ /* share pin config. */
-+#if 1
-+#if 0
-+ /* GPIOB18 is set to PCM by default */
-+ MISC_GPIOB_PIN_ENABLE_REG &= ~(MISC_GSW_P0_CRS_PIN);
-+ gpio_direction_output(50, 1);
-+#endif
-+ PM_PLL_HM_PD_CTRL_REG &= ~(0x1 << 5);
-+ HAL_MISC_ENABLE_SPI_PINS();
-+ HAL_MISC_ENABLE_PCM_PINS(); /* this just for PCM test */
-+ cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SPI_PCM_I2C));
-+ cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SPI_PCM_I2C));
-+#endif
-+
-+ SPI_CONFIGURATION_REG = (((0x0 & 0x3) << 0) | /* 8bits shift length */
-+ (0x0 << 9) | /* SPI mode */
-+ (0x0 << 10) | /* disable FIFO */
-+ (0x1 << 11) | /* SPI master mode */
-+ (0x0 << 12) | /* disable SPI loopback mode */
-+ (0x1 << 13) | /* clock phase */
-+ (0x1 << 14) | /* clock polarity */
-+ (0x0 << 24) | /* disable - SPI data swap */
-+#ifdef CONFIG_SPI_CNS3XXX_2IOREAD
-+ (0x1 << 29) | /* enable - 2IO Read mode */
-+#else
-+ (0x0 << 29) | /* disablea - 2IO Read mode */
-+#endif
-+ (0x0 << 30) | /* disable - SPI high speed read for system boot up */
-+ (0x0 << 31)); /* disable - SPI */
-+
-+ /* Set SPI bit rate PCLK/2 */
-+ SPI_BIT_RATE_CONTROL_REG = 0x1;
-+
-+ /* Set SPI Tx channel 0 */
-+ SPI_TRANSMIT_CONTROL_REG = 0x0;
-+
-+ /* Set Tx FIFO Threshold, Tx FIFO has 2 words */
-+ SPI_FIFO_TRANSMIT_CONFIG_REG &= ~(0x03 << 4);
-+ SPI_FIFO_TRANSMIT_CONFIG_REG |= ((0x0 & 0x03) << 4);
-+
-+ /* Set Rx FIFO Threshold, Rx FIFO has 2 words */
-+ SPI_FIFO_RECEIVE_CONFIG_REG &= ~(0x03 << 4);
-+ SPI_FIFO_RECEIVE_CONFIG_REG |= ((0x0 & 0x03) << 4);
-+
-+ /* Disable all interrupt */
-+ SPI_INTERRUPT_ENABLE_REG = 0x0;
-+
-+ /* Clear spurious interrupt sources */
-+ SPI_INTERRUPT_STATUS_REG = (0x0F << 4);
-+
-+ /* Enable SPI */
-+ SPI_CONFIGURATION_REG |= (0x1 << 31);
-+
-+ return;
-+}
-+
-+static int __init cns3xxx_spi_probe(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct cns3xxx_spi *hw;
-+ int err = 0;
-+
-+ printk("%s: setup CNS3XXX SPI Controller", __FUNCTION__);
-+#ifdef CONFIG_SPI_CNS3XXX_USEDMA
-+ printk(" w/ DMA \n");
-+#else
-+#ifdef CNS3XXX_SPI_INTERRUPT
-+ printk(" in Interrupt mode, w/o DMA \n");
-+#else
-+ printk(" in polling mode, w/o DMA \n");
-+#endif
-+#endif
-+
-+ /* share pin config. */
-+// HAL_MISC_ENABLE_SPI_PINS();
-+
-+ /* Allocate master with space for cns3xxx_spi */
-+ master = spi_alloc_master(&pdev->dev, sizeof(struct cns3xxx_spi));
-+ if (master == NULL) {
-+ dev_err(&pdev->dev, "No memory for spi_master\n");
-+ err = -ENOMEM;
-+ goto err_nomem;
-+ }
-+
-+ hw = spi_master_get_devdata(master);
-+ memset(hw, 0, sizeof(struct cns3xxx_spi));
-+
-+ hw->master = spi_master_get(master);
-+ hw->dev = &pdev->dev;
-+
-+ platform_set_drvdata(pdev, hw);
-+ init_completion(&hw->done);
-+
-+ /* setup the master state. */
-+
-+ master->num_chipselect = 4;
-+ master->bus_num = 1;
-+
-+ /* setup the state for the bitbang driver */
-+
-+ hw->bitbang.master = hw->master;
-+ hw->bitbang.setup_transfer = cns3xxx_spi_setup_transfer;
-+ hw->bitbang.chipselect = cns3xxx_spi_chipselect;
-+ hw->bitbang.txrx_bufs = cns3xxx_spi_txrx;
-+ hw->bitbang.master->setup = cns3xxx_spi_setup;
-+
-+ dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
-+
-+#ifdef CNS3XXX_SPI_INTERRUPT
-+ err = request_irq(IRQ_CNS3XXX_SPI, cns3xxx_spi_irq, IRQF_SHARED, "cns3xxx_spi", hw);
-+ if (err) {
-+ dev_err(&pdev->dev, "Cannot claim IRQ\n");
-+ goto err_no_irq;
-+ }
-+#endif
-+
-+ /* SPI controller initializations */
-+ cns3xxx_spi_initial();
-+
-+ /* register SPI controller */
-+
-+ err = spi_bitbang_start(&hw->bitbang);
-+ if (err) {
-+ dev_err(&pdev->dev, "Failed to register SPI master\n");
-+ goto err_register;
-+ }
-+
-+ spi_slave_probe();
-+
-+ return 0;
-+
-+err_register:
-+#ifdef CNS3XXX_SPI_INTERRUPT
-+err_no_irq:
-+#endif
-+ spi_master_put(hw->master);;
-+
-+err_nomem:
-+ return err;
-+}
-+
-+static int __devexit cns3xxx_spi_remove(struct platform_device *dev)
-+{
-+ struct cns3xxx_spi *hw = platform_get_drvdata(dev);
-+
-+ platform_set_drvdata(dev, NULL);
-+
-+ spi_unregister_master(hw->master);
-+
-+ //cns3xxx_spi_clk_disable();
-+
-+ spi_master_put(hw->master);
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int cns3xxx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
-+{
-+ struct cns3xxx_spi *hw = platform_get_drvdata(pdev);
-+
-+ //cns3xxx_spi_clk_disable();
-+ return 0;
-+}
-+
-+static int cns3xxx_spi_resume(struct platform_device *pdev)
-+{
-+ struct cns3xxx_spi *hw = platform_get_drvdata(pdev);
-+
-+ //cns3xxx_spi_clk_enable()
-+ return 0;
-+}
-+
-+#else
-+#define cns3xxx_spi_suspend NULL
-+#define cns3xxx_spi_resume NULL
-+#endif
-+
-+static struct platform_driver cns3xxx_spi_driver = {
-+ .probe = cns3xxx_spi_probe,
-+ .remove = __devexit_p(cns3xxx_spi_remove),
-+ .suspend = cns3xxx_spi_suspend,
-+ .resume = cns3xxx_spi_resume,
-+ .driver = {
-+ .name = "cns3xxx_spi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init cns3xxx_spi_init(void)
-+{
-+ return platform_driver_register(&cns3xxx_spi_driver);
-+}
-+
-+static void __exit cns3xxx_spi_exit(void)
-+{
-+ platform_driver_unregister(&cns3xxx_spi_driver);
-+}
-+
-+module_init(cns3xxx_spi_init);
-+module_exit(cns3xxx_spi_exit);
-+
-+MODULE_AUTHOR("Cavium Networks");
-+MODULE_DESCRIPTION("CNS3XXX SPI Controller Driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:cns3xxx_spi");
-+
-+EXPORT_SYMBOL_GPL(cns3xxx_spi_tx_rx);
---- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -424,6 +424,12 @@ struct spi_transfer {
- u16 delay_usecs;
- u32 speed_hz;
-
-+#ifdef CONFIG_ARCH_CNS3XXX
-+ unsigned last_in_message_list;
-+#ifdef CONFIG_SPI_CNS3XXX_2IOREAD
-+ u8 dio_read;
-+#endif
-+#endif
- struct list_head transfer_list;
- };
-
-@@ -627,6 +633,13 @@ spi_read(struct spi_device *spi, u8 *buf
- return spi_sync(spi, &m);
- }
-
-+#ifdef CONFIG_ARCH_CNS3XXX
-+extern int spi_write_read_sync(struct spi_device *spi,
-+ const u8 *txbuf, unsigned n_tx,
-+ u8 *rxbuf, unsigned n_rx);
-+
-+#endif
-+
- /* this copies txbuf and rxbuf data; for small transfers only! */
- extern int spi_write_then_read(struct spi_device *spi,
- const u8 *txbuf, unsigned n_tx,
+++ /dev/null
---- a/drivers/usb/core/Kconfig
-+++ b/drivers/usb/core/Kconfig
-@@ -106,11 +106,11 @@ config USB_SUSPEND
-
- If you are unsure about this, say N here.
-
--config USB_OTG
-- bool
-- depends on USB && EXPERIMENTAL
-- select USB_SUSPEND
-- default n
-+#config USB_OTG
-+# bool
-+# depends on USB && EXPERIMENTAL
-+# select USB_SUSPEND
-+# default n
-
-
- config USB_OTG_WHITELIST
---- a/drivers/usb/core/urb.c
-+++ b/drivers/usb/core/urb.c
-@@ -17,7 +17,11 @@ static void urb_destroy(struct kref *kre
-
- if (urb->transfer_flags & URB_FREE_BUFFER)
- kfree(urb->transfer_buffer);
--
-+ if(urb->aligned_transfer_buffer){
-+ kfree(urb->aligned_transfer_buffer);
-+ urb->aligned_transfer_buffer=0;
-+ urb->aligned_transfer_dma=0;
-+ }
- kfree(urb);
- }
-
-@@ -91,6 +95,7 @@ void usb_free_urb(struct urb *urb)
- {
- if (urb)
- kref_put(&urb->kref, urb_destroy);
-+
- }
- EXPORT_SYMBOL_GPL(usb_free_urb);
-
---- a/drivers/usb/gadget/file_storage.c
-+++ b/drivers/usb/gadget/file_storage.c
-@@ -225,9 +225,9 @@
- * of the Gadget, USB Mass Storage, and SCSI protocols.
- */
-
--
--/* #define VERBOSE_DEBUG */
--/* #define DUMP_MSGS */
-+#define DEBUG
-+#define VERBOSE_DEBUG
-+#define DUMP_MSGS
-
-
- #include <linux/blkdev.h>
-@@ -3086,7 +3086,9 @@ static int received_cbw(struct fsg_dev *
- if (req->actual != USB_BULK_CB_WRAP_LEN ||
- cbw->Signature != cpu_to_le32(
- USB_BULK_CB_SIG)) {
-- DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
-+ DBG(fsg, "invalid CBW: bh %.8x buf %.8x len %u sig 0x%x\n",
-+ (u32)bh,
-+ (u32)bh->buf,
- req->actual,
- le32_to_cpu(cbw->Signature));
-
-@@ -4097,6 +4099,7 @@ static int __init fsg_bind(struct usb_ga
- * the buffer will also work with the bulk-out (and
- * interrupt-in) endpoint. */
- bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL);
-+ VDBG(fsg,"%s: %d, bh=%.8x, buf=%.8x\n",__func__,i,bh,bh->buf);
- if (!bh->buf)
- goto out;
- bh->next = bh + 1;
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -495,6 +495,16 @@ config USB_LANGWELL
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-+config USB_GADGET_CNS3XXX_OTG
-+ boolean "CNS3XXX peripheral controller"
-+ depends on USB_CNS3XXX_OTG_BOTH || USB_CNS3XXX_OTG_PCD_ONLY
-+# select USB_OTG
-+ select USB_GADGET_DUALSPEED
-+ select USB_GADGET_SELECTED
-+ select USB_GADGET_SNPS_DWC_OTG
-+ help
-+ Selects the CNS3XXX Perpheral Controller driver
-+
-
- #
- # LAST -- dummy/emulated controller
---- /dev/null
-+++ b/drivers/usb/host/ehci-cns3xxx.c
-@@ -0,0 +1,171 @@
-+
-+#include <linux/platform_device.h>
-+#include <mach/board.h>
-+#include <mach/pm.h>
-+
-+#define cns3xxx_ioremap ioremap
-+#define cns3xxx_iounmap(addr) iounmap
-+
-+static int cns3xxx_ehci_init(struct usb_hcd *hcd)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+ int retval = 0;
-+
-+ printk("%s: !!WARNING!! to verify the following ehci->caps ehci->regs \n",
-+ __FUNCTION__);
-+#ifdef CONFIG_SILICON
-+ //OTG PHY
-+ //cns3xxx_pwr_power_up(1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_USB_PHY0);
-+ //USB PHY
-+ //cns3xxx_pwr_power_up(1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_USB_PHY1);
-+ cns3xxx_pwr_power_up(1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
-+ cns3xxx_pwr_clk_en(1<<PM_CLK_GATE_REG_OFFSET_USB_HOST);
-+ cns3xxx_pwr_soft_rst(1<<PM_SOFT_RST_REG_OFFST_USB_HOST);
-+ //cns3xxx_pwr_clk_en(1<<PM_CLK_GATE_REG_OFFSET_USB_OTG);
-+ //cns3xxx_pwr_soft_rst(1<<PM_SOFT_RST_REG_OFFST_USB_OTG);
-+#endif //CONFIG_SILICON
-+
-+ ehci->caps = hcd->regs;
-+ ehci->regs = hcd->regs
-+ + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
-+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+
-+ hcd->has_tt = 0;
-+ ehci_reset(ehci);
-+
-+ retval = ehci_init(hcd);
-+ if (retval)
-+ return retval;
-+
-+ /* XXX: Only for FPGA, remove it later */
-+ ehci_writel(ehci, 0x00800080, hcd->regs + 0x94);
-+
-+ ehci_port_power(ehci, 0);
-+
-+ return retval;
-+}
-+
-+static const struct hc_driver cns3xxx_ehci_hc_driver = {
-+ .description = hcd_name,
-+ .product_desc = "CNS3XXX EHCI Host Controller",
-+ .hcd_priv_size = sizeof(struct ehci_hcd),
-+ .irq = ehci_irq,
-+ .flags = HCD_MEMORY | HCD_USB2,
-+ .reset = cns3xxx_ehci_init,
-+ .start = ehci_run,
-+ .stop = ehci_stop,
-+ .shutdown = ehci_shutdown,
-+ .urb_enqueue = ehci_urb_enqueue,
-+ .urb_dequeue = ehci_urb_dequeue,
-+ .endpoint_disable = ehci_endpoint_disable,
-+ .get_frame_number = ehci_get_frame,
-+ .hub_status_data = ehci_hub_status_data,
-+ .hub_control = ehci_hub_control,
-+#if defined(CONFIG_PM)
-+ .bus_suspend = ehci_bus_suspend,
-+ .bus_resume = ehci_bus_resume,
-+#endif
-+ .relinquish_port = ehci_relinquish_port,
-+ .port_handed_over = ehci_port_handed_over,
-+};
-+
-+static int cns3xxx_ehci_probe(struct platform_device *pdev)
-+{
-+ struct usb_hcd *hcd;
-+ const struct hc_driver *driver = &cns3xxx_ehci_hc_driver;
-+ struct resource *res;
-+ int irq;
-+ int retval;
-+
-+ if (usb_disabled())
-+ return -ENODEV;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev,
-+ "Found HC with no IRQ. Check %s setup!\n",
-+ dev_name(&pdev->dev));
-+ return -ENODEV;
-+ }
-+ irq = res->start;
-+
-+ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
-+ if (!hcd) {
-+ retval = -ENOMEM;
-+ goto fail_create_hcd;
-+ }
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev,
-+ "Found HC with no register addr. Check %s setup!\n",
-+ dev_name(&pdev->dev));
-+ retval = -ENODEV;
-+ goto fail_request_resource;
-+ }
-+ hcd->rsrc_start = res->start;
-+ hcd->rsrc_len = res->end - res->start + 1;
-+
-+#ifdef CNS3XXX_USB_BASE_VIRT
-+ hcd->regs = (void __iomem *) CNS3XXX_USB_BASE_VIRT;
-+#else
-+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
-+ driver->description)) {
-+ dev_dbg(&pdev->dev, "controller already in use\n");
-+ retval = -EBUSY;
-+ goto fail_request_resource;
-+ }
-+
-+ hcd->regs = cns3xxx_ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+
-+ if (hcd->regs == NULL) {
-+ dev_dbg(&pdev->dev, "error mapping memory\n");
-+ retval = -EFAULT;
-+ goto fail_ioremap;
-+ }
-+#endif
-+
-+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED); /* TODO: IRQF_DISABLED if any interrupt issues */
-+ if (retval)
-+ goto fail_add_hcd;
-+
-+ return retval;
-+
-+#ifndef CNS3XXX_USB_BASE_VIRT
-+fail_add_hcd:
-+ cns3xxx_iounmap(hcd->regs);
-+fail_ioremap:
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+#else
-+fail_request_resource:
-+fail_add_hcd:
-+#endif
-+ usb_put_hcd(hcd);
-+fail_create_hcd:
-+ dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
-+ return retval;
-+}
-+
-+static int cns3xxx_ehci_remove(struct platform_device *pdev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
-+
-+ usb_remove_hcd(hcd);
-+#ifndef CNS3XXX_USB_BASE_VIRT
-+ cns3xxx_iounmap(hcd->regs);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+#endif
-+ usb_put_hcd(hcd);
-+
-+ return 0;
-+}
-+
-+MODULE_ALIAS("platform:cns3xxx-ehci");
-+
-+static struct platform_driver cns3xxx_ehci_driver = {
-+ .probe = cns3xxx_ehci_probe,
-+ .remove = cns3xxx_ehci_remove,
-+ .driver = {
-+ .name = "cns3xxx-ehci",
-+ },
-+};
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -602,6 +602,13 @@ ehci_port_speed(struct ehci_hcd *ehci, u
- #define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
- #endif
-
-+#if defined(CONFIG_ARM) && defined(CONFIG_ARCH_CNS3XXX)
-+#undef readl
-+#undef writel
-+#define readl(addr) __raw_readl((__force unsigned *)addr)
-+#define writel(val, addr) __raw_writel(val, (__force unsigned *)addr)
-+#endif
-+
- static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
- __u32 __iomem * regs)
- {
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1120,6 +1120,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ixp4xx_ehci_driver
- #endif
-
-+#ifdef CONFIG_USB_CNS3XXX_EHCI
-+#include "ehci-cns3xxx.c"
-+#define PLATFORM_DRIVER cns3xxx_ehci_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
- #error "missing bus glue for ehci-hcd"
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -153,6 +153,45 @@ config USB_ISP1760_HCD
- To compile this driver as a module, choose M here: the
- module will be called isp1760.
-
-+config USB_CNS3XXX_EHCI
-+ bool "Cavium CNS3XXX EHCI Module"
-+ depends on USB && USB_EHCI_HCD
-+ ---help---
-+ Cavium CNS3XXX USB EHCI Chipset support
-+
-+config USB_CNS3XXX_OTG
-+ tristate "Cavium CNS3XXX OTG Module"
-+ depends on USB
-+ ---help---
-+ Cavium CNS3XXX USB OTG Chipset support
-+
-+choice
-+ prompt "OTG function includes"
-+ depends on USB_CNS3XXX_OTG
-+ default USB_CNS3XXX_OTG_BOTH
-+
-+config USB_CNS3XXX_OTG_BOTH
-+ bool "both HCD and PCD"
-+
-+config USB_CNS3XXX_OTG_HCD_ONLY
-+ bool "HCD only"
-+
-+config USB_CNS3XXX_OTG_PCD_ONLY
-+ bool "PCD only"
-+
-+endchoice
-+config USB_CNS3XXX_OTG_ENABLE_OTG_DRVVBUS
-+ bool "Enable OTG_DRVVBUS"
-+ depends on USB_CNS3XXX_OTG
-+ default y
-+ ---help---
-+ The Power control IC (FB6862B), which is located around the OTG mini
-+ USB type A/B receptacle, in some early EVB board v1.0/v1.1(#1~#22) is
-+ incorrect(FB6862A), and need to be patched so that VBUS can be applied
-+ properly. In that case, we don't use the OTG_DRVVBUS to control the VBUS.
-+
-+ Check the board that you are using, if the IC is FB6862B, say Y. Otherwise, say N.
-+
- config USB_OHCI_HCD
- tristate "OHCI HCD support"
- depends on USB && USB_ARCH_HAS_OHCI
-@@ -225,6 +264,12 @@ config USB_OHCI_HCD_SSB
-
- If unsure, say N.
-
-+config USB_CNS3XXX_OHCI
-+ bool "Cavium CNS3XXX OHCI Module"
-+ depends on USB_OHCI_HCD
-+ ---help---
-+ Cavium CNS3XXX USB OHCI Chipset support
-+
- config USB_OHCI_BIG_ENDIAN_DESC
- bool
- depends on USB_OHCI_HCD
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -31,3 +31,6 @@ obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
- obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
- obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
- obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
-+obj-$(CONFIG_USB_CNS3XXX_OTG) += otg/
-+obj-$(CONFIG_USB_GADGET_CNS3XXX_OTG) += otg/
-+
---- /dev/null
-+++ b/drivers/usb/host/ohci-cns3xxx.c
-@@ -0,0 +1,143 @@
-+
-+#include <linux/platform_device.h>
-+#include <mach/board.h>
-+
-+#define cns3xxx_ioremap ioremap
-+#define cns3xxx_iounmap(addr) iounmap
-+
-+static int __devinit
-+cns3xxx_ohci_start (struct usb_hcd *hcd)
-+{
-+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
-+ int ret;
-+
-+ if ((ret = ohci_init(ohci)) < 0)
-+ return ret;
-+
-+ ohci->num_ports = 1;
-+
-+ if ((ret = ohci_run(ohci)) < 0) {
-+ err("can't start %s", hcd->self.bus_name);
-+ ohci_stop(hcd);
-+ return ret;
-+ }
-+ return 0;
-+}
-+
-+static const struct hc_driver cns3xxx_ohci_hc_driver = {
-+ .description = hcd_name,
-+ .product_desc = "CNS3XXX OHCI Host controller",
-+ .hcd_priv_size = sizeof(struct ohci_hcd),
-+ .irq = ohci_irq,
-+ .flags = HCD_USB11 | HCD_MEMORY,
-+ .start = cns3xxx_ohci_start,
-+ .stop = ohci_stop,
-+ .shutdown = ohci_shutdown,
-+ .urb_enqueue = ohci_urb_enqueue,
-+ .urb_dequeue = ohci_urb_dequeue,
-+ .endpoint_disable = ohci_endpoint_disable,
-+ .get_frame_number = ohci_get_frame,
-+ .hub_status_data = ohci_hub_status_data,
-+ .hub_control = ohci_hub_control,
-+#ifdef CONFIG_PM
-+ .bus_suspend = ohci_bus_suspend,
-+ .bus_resume = ohci_bus_resume,
-+#endif
-+ .start_port_reset = ohci_start_port_reset,
-+};
-+
-+static int cns3xxx_ohci_probe(struct platform_device *pdev)
-+{
-+ struct usb_hcd *hcd = NULL;
-+ const struct hc_driver *driver = &cns3xxx_ohci_hc_driver;
-+ struct resource *res;
-+ int irq;
-+ int retval;
-+
-+ if (usb_disabled())
-+ return -ENODEV;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev,
-+ "Found HC with no IRQ. Check %s setup!\n",
-+ dev_name(&pdev->dev));
-+ return -ENODEV;
-+ }
-+ irq = res->start;
-+
-+ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
-+ if (!hcd)
-+ return -ENOMEM;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev,
-+ "Found HC with no register addr. Check %s setup!\n",
-+ dev_name(&pdev->dev));
-+ retval = -ENODEV;
-+ goto err1;
-+ }
-+ hcd->rsrc_start = res->start;
-+ hcd->rsrc_len = res->end - res->start + 1;
-+
-+#ifdef CNS3XXX_USB_OHCI_BASE_VIRT
-+ hcd->regs = (void __iomem *) CNS3XXX_USB_OHCI_BASE_VIRT;
-+#else
-+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
-+ driver->description)) {
-+ dev_dbg(&pdev->dev, "controller already in use\n");
-+ retval = -EBUSY;
-+ goto err1;
-+ }
-+
-+ hcd->regs = cns3xxx_ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+
-+ if (hcd->regs == NULL) {
-+ dev_dbg(&pdev->dev, "error mapping memory\n");
-+ retval = -EFAULT;
-+ goto err2;
-+ }
-+#endif
-+
-+ ohci_hcd_init(hcd_to_ohci(hcd));
-+
-+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
-+ if (retval == 0)
-+ return retval;
-+
-+#ifndef CNS3XXX_USB_OHCI_BASE_VIRT
-+ cns3xxx_iounmap(hcd->regs);
-+
-+err2:
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+#endif
-+
-+err1:
-+ usb_put_hcd(hcd);
-+ return retval;
-+}
-+
-+static int cns3xxx_ohci_remove(struct platform_device *pdev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
-+
-+ usb_remove_hcd(hcd);
-+#ifndef CNS3XXX_USB_OHCI_BASE_VIRT
-+ cns3xxx_iounmap(hcd->regs);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+#endif
-+ usb_put_hcd(hcd);
-+
-+ return 0;
-+}
-+
-+MODULE_ALIAS("platform:cns3xxx-ohci");
-+
-+static struct platform_driver ohci_hcd_cns3xxx_driver = {
-+ .probe = cns3xxx_ohci_probe,
-+ .remove = cns3xxx_ohci_remove,
-+ .driver = {
-+ .name = "cns3xxx-ohci",
-+ },
-+};
---- a/drivers/usb/host/ohci.h
-+++ b/drivers/usb/host/ohci.h
-@@ -550,6 +550,14 @@ static inline struct usb_hcd *ohci_to_hc
- * Other arches can be added if/when they're needed.
- *
- */
-+
-+#if defined(CONFIG_ARM) && defined(CONFIG_ARCH_CNS3XXX)
-+#undef readl
-+#undef writel
-+#define readl(addr) __raw_readl((__force unsigned *)addr)
-+#define writel(val, addr) __raw_writel(val, (__force unsigned *)addr)
-+#endif
-+
- static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci,
- __hc32 __iomem * regs)
- {
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1047,6 +1047,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ohci_hcd_at91_driver
- #endif
-
-+#ifdef CONFIG_USB_CNS3XXX_OHCI
-+#include "ohci-cns3xxx.c"
-+#define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver
-+#endif
-+
- #ifdef CONFIG_ARCH_PNX4008
- #include "ohci-pnx4008.c"
- #define PLATFORM_DRIVER usb_hcd_pnx4008_driver
---- /dev/null
-+++ b/drivers/usb/host/otg/dummy_audio.c
-@@ -0,0 +1,1575 @@
-+/*
-+ * zero.c -- Gadget Zero, for USB development
-+ *
-+ * Copyright (C) 2003-2004 David Brownell
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions, and the following disclaimer,
-+ * without modification.
-+ * 2. Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * 3. The names of the above-listed copyright holders may not be used
-+ * to endorse or promote products derived from this software without
-+ * specific prior written permission.
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/*
-+ * Gadget Zero only needs two bulk endpoints, and is an example of how you
-+ * can write a hardware-agnostic gadget driver running inside a USB device.
-+ *
-+ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't
-+ * affect most of the driver.
-+ *
-+ * Use it with the Linux host/master side "usbtest" driver to get a basic
-+ * functional test of your device-side usb stack, or with "usb-skeleton".
-+ *
-+ * It supports two similar configurations. One sinks whatever the usb host
-+ * writes, and in return sources zeroes. The other loops whatever the host
-+ * writes back, so the host can read it. Module options include:
-+ *
-+ * buflen=N default N=4096, buffer size used
-+ * qlen=N default N=32, how many buffers in the loopback queue
-+ * loopdefault default false, list loopback config first
-+ *
-+ * Many drivers will only have one configuration, letting them be much
-+ * simpler if they also don't support high speed operation (like this
-+ * driver does).
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <linux/ioport.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/smp_lock.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/timer.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/uts.h>
-+#include <linux/version.h>
-+#include <linux/device.h>
-+#include <linux/moduleparam.h>
-+#include <linux/proc_fs.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+#include <asm/unaligned.h>
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
-+# include <linux/usb/ch9.h>
-+#else
-+# include <linux/usb_ch9.h>
-+#endif
-+
-+#include <linux/usb_gadget.h>
-+
-+
-+/*-------------------------------------------------------------------------*/
-+/*-------------------------------------------------------------------------*/
-+
-+
-+static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len)
-+{
-+ int count = 0;
-+ u8 c;
-+ u16 uchar;
-+
-+ /* this insists on correct encodings, though not minimal ones.
-+ * BUT it currently rejects legit 4-byte UTF-8 code points,
-+ * which need surrogate pairs. (Unicode 3.1 can use them.)
-+ */
-+ while (len != 0 && (c = (u8) *s++) != 0) {
-+ if (unlikely(c & 0x80)) {
-+ // 2-byte sequence:
-+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
-+ if ((c & 0xe0) == 0xc0) {
-+ uchar = (c & 0x1f) << 6;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c;
-+
-+ // 3-byte sequence (most CJKV characters):
-+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
-+ } else if ((c & 0xf0) == 0xe0) {
-+ uchar = (c & 0x0f) << 12;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c << 6;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c;
-+
-+ /* no bogus surrogates */
-+ if (0xd800 <= uchar && uchar <= 0xdfff)
-+ goto fail;
-+
-+ // 4-byte sequence (surrogate pairs, currently rare):
-+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx
-+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
-+ // (uuuuu = wwww + 1)
-+ // FIXME accept the surrogate code points (only)
-+
-+ } else
-+ goto fail;
-+ } else
-+ uchar = c;
-+ put_unaligned (cpu_to_le16 (uchar), cp++);
-+ count++;
-+ len--;
-+ }
-+ return count;
-+fail:
-+ return -1;
-+}
-+
-+
-+/**
-+ * usb_gadget_get_string - fill out a string descriptor
-+ * @table: of c strings encoded using UTF-8
-+ * @id: string id, from low byte of wValue in get string descriptor
-+ * @buf: at least 256 bytes
-+ *
-+ * Finds the UTF-8 string matching the ID, and converts it into a
-+ * string descriptor in utf16-le.
-+ * Returns length of descriptor (always even) or negative errno
-+ *
-+ * If your driver needs stings in multiple languages, you'll probably
-+ * "switch (wIndex) { ... }" in your ep0 string descriptor logic,
-+ * using this routine after choosing which set of UTF-8 strings to use.
-+ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
-+ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1
-+ * characters (which are also widely used in C strings).
-+ */
-+int
-+usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
-+{
-+ struct usb_string *s;
-+ int len;
-+
-+ /* descriptor 0 has the language id */
-+ if (id == 0) {
-+ buf [0] = 4;
-+ buf [1] = USB_DT_STRING;
-+ buf [2] = (u8) table->language;
-+ buf [3] = (u8) (table->language >> 8);
-+ return 4;
-+ }
-+ for (s = table->strings; s && s->s; s++)
-+ if (s->id == id)
-+ break;
-+
-+ /* unrecognized: stall. */
-+ if (!s || !s->s)
-+ return -EINVAL;
-+
-+ /* string descriptors have length, tag, then UTF16-LE text */
-+ len = min ((size_t) 126, strlen (s->s));
-+ memset (buf + 2, 0, 2 * len); /* zero all the bytes */
-+ len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len);
-+ if (len < 0)
-+ return -EINVAL;
-+ buf [0] = (len + 1) * 2;
-+ buf [1] = USB_DT_STRING;
-+ return buf [0];
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+/*-------------------------------------------------------------------------*/
-+
-+
-+/**
-+ * usb_descriptor_fillbuf - fill buffer with descriptors
-+ * @buf: Buffer to be filled
-+ * @buflen: Size of buf
-+ * @src: Array of descriptor pointers, terminated by null pointer.
-+ *
-+ * Copies descriptors into the buffer, returning the length or a
-+ * negative error code if they can't all be copied. Useful when
-+ * assembling descriptors for an associated set of interfaces used
-+ * as part of configuring a composite device; or in other cases where
-+ * sets of descriptors need to be marshaled.
-+ */
-+int
-+usb_descriptor_fillbuf(void *buf, unsigned buflen,
-+ const struct usb_descriptor_header **src)
-+{
-+ u8 *dest = buf;
-+
-+ if (!src)
-+ return -EINVAL;
-+
-+ /* fill buffer from src[] until null descriptor ptr */
-+ for (; 0 != *src; src++) {
-+ unsigned len = (*src)->bLength;
-+
-+ if (len > buflen)
-+ return -EINVAL;
-+ memcpy(dest, *src, len);
-+ buflen -= len;
-+ dest += len;
-+ }
-+ return dest - (u8 *)buf;
-+}
-+
-+
-+/**
-+ * usb_gadget_config_buf - builts a complete configuration descriptor
-+ * @config: Header for the descriptor, including characteristics such
-+ * as power requirements and number of interfaces.
-+ * @desc: Null-terminated vector of pointers to the descriptors (interface,
-+ * endpoint, etc) defining all functions in this device configuration.
-+ * @buf: Buffer for the resulting configuration descriptor.
-+ * @length: Length of buffer. If this is not big enough to hold the
-+ * entire configuration descriptor, an error code will be returned.
-+ *
-+ * This copies descriptors into the response buffer, building a descriptor
-+ * for that configuration. It returns the buffer length or a negative
-+ * status code. The config.wTotalLength field is set to match the length
-+ * of the result, but other descriptor fields (including power usage and
-+ * interface count) must be set by the caller.
-+ *
-+ * Gadget drivers could use this when constructing a config descriptor
-+ * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the
-+ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.
-+ */
-+int usb_gadget_config_buf(
-+ const struct usb_config_descriptor *config,
-+ void *buf,
-+ unsigned length,
-+ const struct usb_descriptor_header **desc
-+)
-+{
-+ struct usb_config_descriptor *cp = buf;
-+ int len;
-+
-+ /* config descriptor first */
-+ if (length < USB_DT_CONFIG_SIZE || !desc)
-+ return -EINVAL;
-+ *cp = *config;
-+
-+ /* then interface/endpoint/class/vendor/... */
-+ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
-+ length - USB_DT_CONFIG_SIZE, desc);
-+ if (len < 0)
-+ return len;
-+ len += USB_DT_CONFIG_SIZE;
-+ if (len > 0xffff)
-+ return -EINVAL;
-+
-+ /* patch up the config descriptor */
-+ cp->bLength = USB_DT_CONFIG_SIZE;
-+ cp->bDescriptorType = USB_DT_CONFIG;
-+ cp->wTotalLength = cpu_to_le16(len);
-+ cp->bmAttributes |= USB_CONFIG_ATT_ONE;
-+ return len;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+/*-------------------------------------------------------------------------*/
-+
-+
-+#define RBUF_LEN (1024*1024)
-+static int rbuf_start;
-+static int rbuf_len;
-+static __u8 rbuf[RBUF_LEN];
-+
-+/*-------------------------------------------------------------------------*/
-+
-+#define DRIVER_VERSION "St Patrick's Day 2004"
-+
-+static const char shortname [] = "zero";
-+static const char longname [] = "YAMAHA YST-MS35D USB Speaker ";
-+
-+static const char source_sink [] = "source and sink data";
-+static const char loopback [] = "loop input to output";
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * driver assumes self-powered hardware, and
-+ * has no way for users to trigger remote wakeup.
-+ *
-+ * this version autoconfigures as much as possible,
-+ * which is reasonable for most "bulk-only" drivers.
-+ */
-+static const char *EP_IN_NAME; /* source */
-+static const char *EP_OUT_NAME; /* sink */
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* big enough to hold our biggest descriptor */
-+#define USB_BUFSIZ 512
-+
-+struct zero_dev {
-+ spinlock_t lock;
-+ struct usb_gadget *gadget;
-+ struct usb_request *req; /* for control responses */
-+
-+ /* when configured, we have one of two configs:
-+ * - source data (in to host) and sink it (out from host)
-+ * - or loop it back (out from host back in to host)
-+ */
-+ u8 config;
-+ struct usb_ep *in_ep, *out_ep;
-+
-+ /* autoresume timer */
-+ struct timer_list resume;
-+};
-+
-+#define xprintk(d,level,fmt,args...) \
-+ dev_printk(level , &(d)->gadget->dev , fmt , ## args)
-+
-+#ifdef DEBUG
-+#define DBG(dev,fmt,args...) \
-+ xprintk(dev , KERN_DEBUG , fmt , ## args)
-+#else
-+#define DBG(dev,fmt,args...) \
-+ do { } while (0)
-+#endif /* DEBUG */
-+
-+#ifdef VERBOSE
-+#define VDBG DBG
-+#else
-+#define VDBG(dev,fmt,args...) \
-+ do { } while (0)
-+#endif /* VERBOSE */
-+
-+#define ERROR(dev,fmt,args...) \
-+ xprintk(dev , KERN_ERR , fmt , ## args)
-+#define WARN(dev,fmt,args...) \
-+ xprintk(dev , KERN_WARNING , fmt , ## args)
-+#define INFO(dev,fmt,args...) \
-+ xprintk(dev , KERN_INFO , fmt , ## args)
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static unsigned buflen = 4096;
-+static unsigned qlen = 32;
-+static unsigned pattern = 0;
-+
-+module_param (buflen, uint, S_IRUGO|S_IWUSR);
-+module_param (qlen, uint, S_IRUGO|S_IWUSR);
-+module_param (pattern, uint, S_IRUGO|S_IWUSR);
-+
-+/*
-+ * if it's nonzero, autoresume says how many seconds to wait
-+ * before trying to wake up the host after suspend.
-+ */
-+static unsigned autoresume = 0;
-+module_param (autoresume, uint, 0);
-+
-+/*
-+ * Normally the "loopback" configuration is second (index 1) so
-+ * it's not the default. Here's where to change that order, to
-+ * work better with hosts where config changes are problematic.
-+ * Or controllers (like superh) that only support one config.
-+ */
-+static int loopdefault = 0;
-+
-+module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* Thanks to NetChip Technologies for donating this product ID.
-+ *
-+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
-+ * Instead: allocate your own, using normal USB-IF procedures.
-+ */
-+#ifndef CONFIG_USB_ZERO_HNPTEST
-+#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */
-+#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */
-+#else
-+#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */
-+#define DRIVER_PRODUCT_NUM 0xbadd
-+#endif
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * DESCRIPTORS ... most are static, but strings and (full)
-+ * configuration descriptors are built on demand.
-+ */
-+
-+/*
-+#define STRING_MANUFACTURER 25
-+#define STRING_PRODUCT 42
-+#define STRING_SERIAL 101
-+*/
-+#define STRING_MANUFACTURER 1
-+#define STRING_PRODUCT 2
-+#define STRING_SERIAL 3
-+
-+#define STRING_SOURCE_SINK 250
-+#define STRING_LOOPBACK 251
-+
-+/*
-+ * This device advertises two configurations; these numbers work
-+ * on a pxa250 as well as more flexible hardware.
-+ */
-+#define CONFIG_SOURCE_SINK 3
-+#define CONFIG_LOOPBACK 2
-+
-+/*
-+static struct usb_device_descriptor
-+device_desc = {
-+ .bLength = sizeof device_desc,
-+ .bDescriptorType = USB_DT_DEVICE,
-+
-+ .bcdUSB = __constant_cpu_to_le16 (0x0200),
-+ .bDeviceClass = USB_CLASS_VENDOR_SPEC,
-+
-+ .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM),
-+ .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM),
-+ .iManufacturer = STRING_MANUFACTURER,
-+ .iProduct = STRING_PRODUCT,
-+ .iSerialNumber = STRING_SERIAL,
-+ .bNumConfigurations = 2,
-+};
-+*/
-+static struct usb_device_descriptor
-+device_desc = {
-+ .bLength = sizeof device_desc,
-+ .bDescriptorType = USB_DT_DEVICE,
-+ .bcdUSB = __constant_cpu_to_le16 (0x0100),
-+ .bDeviceClass = USB_CLASS_PER_INTERFACE,
-+ .bDeviceSubClass = 0,
-+ .bDeviceProtocol = 0,
-+ .bMaxPacketSize0 = 64,
-+ .bcdDevice = __constant_cpu_to_le16 (0x0100),
-+ .idVendor = __constant_cpu_to_le16 (0x0499),
-+ .idProduct = __constant_cpu_to_le16 (0x3002),
-+ .iManufacturer = STRING_MANUFACTURER,
-+ .iProduct = STRING_PRODUCT,
-+ .iSerialNumber = STRING_SERIAL,
-+ .bNumConfigurations = 1,
-+};
-+
-+static struct usb_config_descriptor
-+z_config = {
-+ .bLength = sizeof z_config,
-+ .bDescriptorType = USB_DT_CONFIG,
-+
-+ /* compute wTotalLength on the fly */
-+ .bNumInterfaces = 2,
-+ .bConfigurationValue = 1,
-+ .iConfiguration = 0,
-+ .bmAttributes = 0x40,
-+ .bMaxPower = 0, /* self-powered */
-+};
-+
-+
-+static struct usb_otg_descriptor
-+otg_descriptor = {
-+ .bLength = sizeof otg_descriptor,
-+ .bDescriptorType = USB_DT_OTG,
-+
-+ .bmAttributes = USB_OTG_SRP,
-+};
-+
-+/* one interface in each configuration */
-+#ifdef CONFIG_USB_GADGET_DUALSPEED
-+
-+/*
-+ * usb 2.0 devices need to expose both high speed and full speed
-+ * descriptors, unless they only run at full speed.
-+ *
-+ * that means alternate endpoint descriptors (bigger packets)
-+ * and a "device qualifier" ... plus more construction options
-+ * for the config descriptor.
-+ */
-+
-+static struct usb_qualifier_descriptor
-+dev_qualifier = {
-+ .bLength = sizeof dev_qualifier,
-+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
-+
-+ .bcdUSB = __constant_cpu_to_le16 (0x0200),
-+ .bDeviceClass = USB_CLASS_VENDOR_SPEC,
-+
-+ .bNumConfigurations = 2,
-+};
-+
-+
-+struct usb_cs_as_general_descriptor {
-+ __u8 bLength;
-+ __u8 bDescriptorType;
-+
-+ __u8 bDescriptorSubType;
-+ __u8 bTerminalLink;
-+ __u8 bDelay;
-+ __u16 wFormatTag;
-+} __attribute__ ((packed));
-+
-+struct usb_cs_as_format_descriptor {
-+ __u8 bLength;
-+ __u8 bDescriptorType;
-+
-+ __u8 bDescriptorSubType;
-+ __u8 bFormatType;
-+ __u8 bNrChannels;
-+ __u8 bSubframeSize;
-+ __u8 bBitResolution;
-+ __u8 bSamfreqType;
-+ __u8 tLowerSamFreq[3];
-+ __u8 tUpperSamFreq[3];
-+} __attribute__ ((packed));
-+
-+static const struct usb_interface_descriptor
-+z_audio_control_if_desc = {
-+ .bLength = sizeof z_audio_control_if_desc,
-+ .bDescriptorType = USB_DT_INTERFACE,
-+ .bInterfaceNumber = 0,
-+ .bAlternateSetting = 0,
-+ .bNumEndpoints = 0,
-+ .bInterfaceClass = USB_CLASS_AUDIO,
-+ .bInterfaceSubClass = 0x1,
-+ .bInterfaceProtocol = 0,
-+ .iInterface = 0,
-+};
-+
-+static const struct usb_interface_descriptor
-+z_audio_if_desc = {
-+ .bLength = sizeof z_audio_if_desc,
-+ .bDescriptorType = USB_DT_INTERFACE,
-+ .bInterfaceNumber = 1,
-+ .bAlternateSetting = 0,
-+ .bNumEndpoints = 0,
-+ .bInterfaceClass = USB_CLASS_AUDIO,
-+ .bInterfaceSubClass = 0x2,
-+ .bInterfaceProtocol = 0,
-+ .iInterface = 0,
-+};
-+
-+static const struct usb_interface_descriptor
-+z_audio_if_desc2 = {
-+ .bLength = sizeof z_audio_if_desc,
-+ .bDescriptorType = USB_DT_INTERFACE,
-+ .bInterfaceNumber = 1,
-+ .bAlternateSetting = 1,
-+ .bNumEndpoints = 1,
-+ .bInterfaceClass = USB_CLASS_AUDIO,
-+ .bInterfaceSubClass = 0x2,
-+ .bInterfaceProtocol = 0,
-+ .iInterface = 0,
-+};
-+
-+static const struct usb_cs_as_general_descriptor
-+z_audio_cs_as_if_desc = {
-+ .bLength = 7,
-+ .bDescriptorType = 0x24,
-+
-+ .bDescriptorSubType = 0x01,
-+ .bTerminalLink = 0x01,
-+ .bDelay = 0x0,
-+ .wFormatTag = __constant_cpu_to_le16 (0x0001)
-+};
-+
-+
-+static const struct usb_cs_as_format_descriptor
-+z_audio_cs_as_format_desc = {
-+ .bLength = 0xe,
-+ .bDescriptorType = 0x24,
-+
-+ .bDescriptorSubType = 2,
-+ .bFormatType = 1,
-+ .bNrChannels = 1,
-+ .bSubframeSize = 1,
-+ .bBitResolution = 8,
-+ .bSamfreqType = 0,
-+ .tLowerSamFreq = {0x7e, 0x13, 0x00},
-+ .tUpperSamFreq = {0xe2, 0xd6, 0x00},
-+};
-+
-+static const struct usb_endpoint_descriptor
-+z_iso_ep = {
-+ .bLength = 0x09,
-+ .bDescriptorType = 0x05,
-+ .bEndpointAddress = 0x04,
-+ .bmAttributes = 0x09,
-+ .wMaxPacketSize = 0x0038,
-+ .bInterval = 0x01,
-+ .bRefresh = 0x00,
-+ .bSynchAddress = 0x00,
-+};
-+
-+static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+// 9 bytes
-+static char z_ac_interface_header_desc[] =
-+{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 };
-+
-+// 12 bytes
-+static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02,
-+ 0x03, 0x00, 0x00, 0x00};
-+// 13 bytes
-+static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00,
-+ 0x02, 0x00, 0x02, 0x00, 0x00};
-+// 9 bytes
-+static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02,
-+ 0x00};
-+
-+static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00,
-+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00,
-+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00,
-+ 0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00,
-+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00,
-+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+
-+
-+static const struct usb_descriptor_header *z_function [] = {
-+ (struct usb_descriptor_header *) &z_audio_control_if_desc,
-+ (struct usb_descriptor_header *) &z_ac_interface_header_desc,
-+ (struct usb_descriptor_header *) &z_0,
-+ (struct usb_descriptor_header *) &z_1,
-+ (struct usb_descriptor_header *) &z_2,
-+ (struct usb_descriptor_header *) &z_audio_if_desc,
-+ (struct usb_descriptor_header *) &z_audio_if_desc2,
-+ (struct usb_descriptor_header *) &z_audio_cs_as_if_desc,
-+ (struct usb_descriptor_header *) &z_audio_cs_as_format_desc,
-+ (struct usb_descriptor_header *) &z_iso_ep,
-+ (struct usb_descriptor_header *) &z_iso_ep2,
-+ (struct usb_descriptor_header *) &za_0,
-+ (struct usb_descriptor_header *) &za_1,
-+ (struct usb_descriptor_header *) &za_2,
-+ (struct usb_descriptor_header *) &za_3,
-+ (struct usb_descriptor_header *) &za_4,
-+ (struct usb_descriptor_header *) &za_5,
-+ (struct usb_descriptor_header *) &za_6,
-+ (struct usb_descriptor_header *) &za_7,
-+ (struct usb_descriptor_header *) &za_8,
-+ (struct usb_descriptor_header *) &za_9,
-+ (struct usb_descriptor_header *) &za_10,
-+ (struct usb_descriptor_header *) &za_11,
-+ (struct usb_descriptor_header *) &za_12,
-+ (struct usb_descriptor_header *) &za_13,
-+ (struct usb_descriptor_header *) &za_14,
-+ (struct usb_descriptor_header *) &za_15,
-+ (struct usb_descriptor_header *) &za_16,
-+ (struct usb_descriptor_header *) &za_17,
-+ (struct usb_descriptor_header *) &za_18,
-+ (struct usb_descriptor_header *) &za_19,
-+ (struct usb_descriptor_header *) &za_20,
-+ (struct usb_descriptor_header *) &za_21,
-+ (struct usb_descriptor_header *) &za_22,
-+ (struct usb_descriptor_header *) &za_23,
-+ (struct usb_descriptor_header *) &za_24,
-+ NULL,
-+};
-+
-+/* maxpacket and other transfer characteristics vary by speed. */
-+#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
-+
-+#else
-+
-+/* if there's no high speed support, maxpacket doesn't change. */
-+#define ep_desc(g,hs,fs) fs
-+
-+#endif /* !CONFIG_USB_GADGET_DUALSPEED */
-+
-+static char manufacturer [40];
-+//static char serial [40];
-+static char serial [] = "Ser 00 em";
-+
-+/* static strings, in UTF-8 */
-+static struct usb_string strings [] = {
-+ { STRING_MANUFACTURER, manufacturer, },
-+ { STRING_PRODUCT, longname, },
-+ { STRING_SERIAL, serial, },
-+ { STRING_LOOPBACK, loopback, },
-+ { STRING_SOURCE_SINK, source_sink, },
-+ { } /* end of list */
-+};
-+
-+static struct usb_gadget_strings stringtab = {
-+ .language = 0x0409, /* en-us */
-+ .strings = strings,
-+};
-+
-+/*
-+ * config descriptors are also handcrafted. these must agree with code
-+ * that sets configurations, and with code managing interfaces and their
-+ * altsettings. other complexity may come from:
-+ *
-+ * - high speed support, including "other speed config" rules
-+ * - multiple configurations
-+ * - interfaces with alternate settings
-+ * - embedded class or vendor-specific descriptors
-+ *
-+ * this handles high speed, and has a second config that could as easily
-+ * have been an alternate interface setting (on most hardware).
-+ *
-+ * NOTE: to demonstrate (and test) more USB capabilities, this driver
-+ * should include an altsetting to test interrupt transfers, including
-+ * high bandwidth modes at high speed. (Maybe work like Intel's test
-+ * device?)
-+ */
-+static int
-+config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index)
-+{
-+ int len;
-+ const struct usb_descriptor_header **function;
-+
-+ function = z_function;
-+ len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function);
-+ if (len < 0)
-+ return len;
-+ ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
-+ return len;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static struct usb_request *
-+alloc_ep_req (struct usb_ep *ep, unsigned length)
-+{
-+ struct usb_request *req;
-+
-+ req = usb_ep_alloc_request (ep, GFP_ATOMIC);
-+ if (req) {
-+ req->length = length;
-+ req->buf = usb_ep_alloc_buffer (ep, length,
-+ &req->dma, GFP_ATOMIC);
-+ if (!req->buf) {
-+ usb_ep_free_request (ep, req);
-+ req = NULL;
-+ }
-+ }
-+ return req;
-+}
-+
-+static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
-+{
-+ if (req->buf)
-+ usb_ep_free_buffer (ep, req->buf, req->dma, req->length);
-+ usb_ep_free_request (ep, req);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* optionally require specific source/sink data patterns */
-+
-+static int
-+check_read_data (
-+ struct zero_dev *dev,
-+ struct usb_ep *ep,
-+ struct usb_request *req
-+)
-+{
-+ unsigned i;
-+ u8 *buf = req->buf;
-+
-+ for (i = 0; i < req->actual; i++, buf++) {
-+ switch (pattern) {
-+ /* all-zeroes has no synchronization issues */
-+ case 0:
-+ if (*buf == 0)
-+ continue;
-+ break;
-+ /* mod63 stays in sync with short-terminated transfers,
-+ * or otherwise when host and gadget agree on how large
-+ * each usb transfer request should be. resync is done
-+ * with set_interface or set_config.
-+ */
-+ case 1:
-+ if (*buf == (u8)(i % 63))
-+ continue;
-+ break;
-+ }
-+ ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf);
-+ usb_ep_set_halt (ep);
-+ return -EINVAL;
-+ }
-+ return 0;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void zero_reset_config (struct zero_dev *dev)
-+{
-+ if (dev->config == 0)
-+ return;
-+
-+ DBG (dev, "reset config\n");
-+
-+ /* just disable endpoints, forcing completion of pending i/o.
-+ * all our completion handlers free their requests in this case.
-+ */
-+ if (dev->in_ep) {
-+ usb_ep_disable (dev->in_ep);
-+ dev->in_ep = NULL;
-+ }
-+ if (dev->out_ep) {
-+ usb_ep_disable (dev->out_ep);
-+ dev->out_ep = NULL;
-+ }
-+ dev->config = 0;
-+ del_timer (&dev->resume);
-+}
-+
-+#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos))
-+
-+static void
-+zero_isoc_complete (struct usb_ep *ep, struct usb_request *req)
-+{
-+ struct zero_dev *dev = ep->driver_data;
-+ int status = req->status;
-+ int i, j;
-+
-+ switch (status) {
-+
-+ case 0: /* normal completion? */
-+ //printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual);
-+ for (i=0, j=rbuf_start; i<req->actual; i++) {
-+ //printk ("%02x ", ((__u8*)req->buf)[i]);
-+ rbuf[j] = ((__u8*)req->buf)[i];
-+ j++;
-+ if (j >= RBUF_LEN) j=0;
-+ }
-+ rbuf_start = j;
-+ //printk ("\n\n");
-+
-+ if (rbuf_len < RBUF_LEN) {
-+ rbuf_len += req->actual;
-+ if (rbuf_len > RBUF_LEN) {
-+ rbuf_len = RBUF_LEN;
-+ }
-+ }
-+
-+ break;
-+
-+ /* this endpoint is normally active while we're configured */
-+ case -ECONNABORTED: /* hardware forced ep reset */
-+ case -ECONNRESET: /* request dequeued */
-+ case -ESHUTDOWN: /* disconnect from host */
-+ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
-+ req->actual, req->length);
-+ if (ep == dev->out_ep)
-+ check_read_data (dev, ep, req);
-+ free_ep_req (ep, req);
-+ return;
-+
-+ case -EOVERFLOW: /* buffer overrun on read means that
-+ * we didn't provide a big enough
-+ * buffer.
-+ */
-+ default:
-+#if 1
-+ DBG (dev, "%s complete --> %d, %d/%d\n", ep->name,
-+ status, req->actual, req->length);
-+#endif
-+ case -EREMOTEIO: /* short read */
-+ break;
-+ }
-+
-+ status = usb_ep_queue (ep, req, GFP_ATOMIC);
-+ if (status) {
-+ ERROR (dev, "kill %s: resubmit %d bytes --> %d\n",
-+ ep->name, req->length, status);
-+ usb_ep_set_halt (ep);
-+ /* FIXME recover later ... somehow */
-+ }
-+}
-+
-+static struct usb_request *
-+zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags)
-+{
-+ struct usb_request *req;
-+ int status;
-+
-+ req = alloc_ep_req (ep, 512);
-+ if (!req)
-+ return NULL;
-+
-+ req->complete = zero_isoc_complete;
-+
-+ status = usb_ep_queue (ep, req, gfp_flags);
-+ if (status) {
-+ struct zero_dev *dev = ep->driver_data;
-+
-+ ERROR (dev, "start %s --> %d\n", ep->name, status);
-+ free_ep_req (ep, req);
-+ req = NULL;
-+ }
-+
-+ return req;
-+}
-+
-+/* change our operational config. this code must agree with the code
-+ * that returns config descriptors, and altsetting code.
-+ *
-+ * it's also responsible for power management interactions. some
-+ * configurations might not work with our current power sources.
-+ *
-+ * note that some device controller hardware will constrain what this
-+ * code can do, perhaps by disallowing more than one configuration or
-+ * by limiting configuration choices (like the pxa2xx).
-+ */
-+static int
-+zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags)
-+{
-+ int result = 0;
-+ struct usb_gadget *gadget = dev->gadget;
-+ const struct usb_endpoint_descriptor *d;
-+ struct usb_ep *ep;
-+
-+ if (number == dev->config)
-+ return 0;
-+
-+ zero_reset_config (dev);
-+
-+ gadget_for_each_ep (ep, gadget) {
-+
-+ if (strcmp (ep->name, "ep4") == 0) {
-+
-+ d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6
-+ result = usb_ep_enable (ep, d);
-+
-+ if (result == 0) {
-+ ep->driver_data = dev;
-+ dev->in_ep = ep;
-+
-+ if (zero_start_isoc_ep (ep, gfp_flags) != 0) {
-+
-+ dev->in_ep = ep;
-+ continue;
-+ }
-+
-+ usb_ep_disable (ep);
-+ result = -EIO;
-+ }
-+ }
-+
-+ }
-+
-+ dev->config = number;
-+ return result;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
-+{
-+ if (req->status || req->actual != req->length)
-+ DBG ((struct zero_dev *) ep->driver_data,
-+ "setup complete --> %d, %d/%d\n",
-+ req->status, req->actual, req->length);
-+}
-+
-+/*
-+ * The setup() callback implements all the ep0 functionality that's
-+ * not handled lower down, in hardware or the hardware driver (like
-+ * device and endpoint feature flags, and their status). It's all
-+ * housekeeping for the gadget function we're implementing. Most of
-+ * the work is in config-specific setup.
-+ */
-+static int
-+zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+ struct usb_request *req = dev->req;
-+ int value = -EOPNOTSUPP;
-+
-+ /* usually this stores reply data in the pre-allocated ep0 buffer,
-+ * but config change events will reconfigure hardware.
-+ */
-+ req->zero = 0;
-+ switch (ctrl->bRequest) {
-+
-+ case USB_REQ_GET_DESCRIPTOR:
-+
-+ switch (ctrl->wValue >> 8) {
-+
-+ case USB_DT_DEVICE:
-+ value = min (ctrl->wLength, (u16) sizeof device_desc);
-+ memcpy (req->buf, &device_desc, value);
-+ break;
-+#ifdef CONFIG_USB_GADGET_DUALSPEED
-+ case USB_DT_DEVICE_QUALIFIER:
-+ if (!gadget->is_dualspeed)
-+ break;
-+ value = min (ctrl->wLength, (u16) sizeof dev_qualifier);
-+ memcpy (req->buf, &dev_qualifier, value);
-+ break;
-+
-+ case USB_DT_OTHER_SPEED_CONFIG:
-+ if (!gadget->is_dualspeed)
-+ break;
-+ // FALLTHROUGH
-+#endif /* CONFIG_USB_GADGET_DUALSPEED */
-+ case USB_DT_CONFIG:
-+ value = config_buf (gadget, req->buf,
-+ ctrl->wValue >> 8,
-+ ctrl->wValue & 0xff);
-+ if (value >= 0)
-+ value = min (ctrl->wLength, (u16) value);
-+ break;
-+
-+ case USB_DT_STRING:
-+ /* wIndex == language code.
-+ * this driver only handles one language, you can
-+ * add string tables for other languages, using
-+ * any UTF-8 characters
-+ */
-+ value = usb_gadget_get_string (&stringtab,
-+ ctrl->wValue & 0xff, req->buf);
-+ if (value >= 0) {
-+ value = min (ctrl->wLength, (u16) value);
-+ }
-+ break;
-+ }
-+ break;
-+
-+ /* currently two configs, two speeds */
-+ case USB_REQ_SET_CONFIGURATION:
-+ if (ctrl->bRequestType != 0)
-+ goto unknown;
-+
-+ spin_lock (&dev->lock);
-+ value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC);
-+ spin_unlock (&dev->lock);
-+ break;
-+ case USB_REQ_GET_CONFIGURATION:
-+ if (ctrl->bRequestType != USB_DIR_IN)
-+ goto unknown;
-+ *(u8 *)req->buf = dev->config;
-+ value = min (ctrl->wLength, (u16) 1);
-+ break;
-+
-+ /* until we add altsetting support, or other interfaces,
-+ * only 0/0 are possible. pxa2xx only supports 0/0 (poorly)
-+ * and already killed pending endpoint I/O.
-+ */
-+ case USB_REQ_SET_INTERFACE:
-+
-+ if (ctrl->bRequestType != USB_RECIP_INTERFACE)
-+ goto unknown;
-+ spin_lock (&dev->lock);
-+ if (dev->config) {
-+ u8 config = dev->config;
-+
-+ /* resets interface configuration, forgets about
-+ * previous transaction state (queued bufs, etc)
-+ * and re-inits endpoint state (toggle etc)
-+ * no response queued, just zero status == success.
-+ * if we had more than one interface we couldn't
-+ * use this "reset the config" shortcut.
-+ */
-+ zero_reset_config (dev);
-+ zero_set_config (dev, config, GFP_ATOMIC);
-+ value = 0;
-+ }
-+ spin_unlock (&dev->lock);
-+ break;
-+ case USB_REQ_GET_INTERFACE:
-+ if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) {
-+ value = ctrl->wLength;
-+ break;
-+ }
-+ else {
-+ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
-+ goto unknown;
-+ if (!dev->config)
-+ break;
-+ if (ctrl->wIndex != 0) {
-+ value = -EDOM;
-+ break;
-+ }
-+ *(u8 *)req->buf = 0;
-+ value = min (ctrl->wLength, (u16) 1);
-+ }
-+ break;
-+
-+ /*
-+ * These are the same vendor-specific requests supported by
-+ * Intel's USB 2.0 compliance test devices. We exceed that
-+ * device spec by allowing multiple-packet requests.
-+ */
-+ case 0x5b: /* control WRITE test -- fill the buffer */
-+ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
-+ goto unknown;
-+ if (ctrl->wValue || ctrl->wIndex)
-+ break;
-+ /* just read that many bytes into the buffer */
-+ if (ctrl->wLength > USB_BUFSIZ)
-+ break;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x5c: /* control READ test -- return the buffer */
-+ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
-+ goto unknown;
-+ if (ctrl->wValue || ctrl->wIndex)
-+ break;
-+ /* expect those bytes are still in the buffer; send back */
-+ if (ctrl->wLength > USB_BUFSIZ
-+ || ctrl->wLength != req->length)
-+ break;
-+ value = ctrl->wLength;
-+ break;
-+
-+ case 0x01: // SET_CUR
-+ case 0x02:
-+ case 0x03:
-+ case 0x04:
-+ case 0x05:
-+ value = ctrl->wLength;
-+ break;
-+ case 0x81:
-+ switch (ctrl->wValue) {
-+ case 0x0201:
-+ case 0x0202:
-+ ((u8*)req->buf)[0] = 0x00;
-+ ((u8*)req->buf)[1] = 0xe3;
-+ break;
-+ case 0x0300:
-+ case 0x0500:
-+ ((u8*)req->buf)[0] = 0x00;
-+ break;
-+ }
-+ //((u8*)req->buf)[0] = 0x81;
-+ //((u8*)req->buf)[1] = 0x81;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x82:
-+ switch (ctrl->wValue) {
-+ case 0x0201:
-+ case 0x0202:
-+ ((u8*)req->buf)[0] = 0x00;
-+ ((u8*)req->buf)[1] = 0xc3;
-+ break;
-+ case 0x0300:
-+ case 0x0500:
-+ ((u8*)req->buf)[0] = 0x00;
-+ break;
-+ }
-+ //((u8*)req->buf)[0] = 0x82;
-+ //((u8*)req->buf)[1] = 0x82;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x83:
-+ switch (ctrl->wValue) {
-+ case 0x0201:
-+ case 0x0202:
-+ ((u8*)req->buf)[0] = 0x00;
-+ ((u8*)req->buf)[1] = 0x00;
-+ break;
-+ case 0x0300:
-+ ((u8*)req->buf)[0] = 0x60;
-+ break;
-+ case 0x0500:
-+ ((u8*)req->buf)[0] = 0x18;
-+ break;
-+ }
-+ //((u8*)req->buf)[0] = 0x83;
-+ //((u8*)req->buf)[1] = 0x83;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x84:
-+ switch (ctrl->wValue) {
-+ case 0x0201:
-+ case 0x0202:
-+ ((u8*)req->buf)[0] = 0x00;
-+ ((u8*)req->buf)[1] = 0x01;
-+ break;
-+ case 0x0300:
-+ case 0x0500:
-+ ((u8*)req->buf)[0] = 0x08;
-+ break;
-+ }
-+ //((u8*)req->buf)[0] = 0x84;
-+ //((u8*)req->buf)[1] = 0x84;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x85:
-+ ((u8*)req->buf)[0] = 0x85;
-+ ((u8*)req->buf)[1] = 0x85;
-+ value = ctrl->wLength;
-+ break;
-+
-+
-+ default:
-+unknown:
-+ printk("unknown control req%02x.%02x v%04x i%04x l%d\n",
-+ ctrl->bRequestType, ctrl->bRequest,
-+ ctrl->wValue, ctrl->wIndex, ctrl->wLength);
-+ }
-+
-+ /* respond with data transfer before status phase? */
-+ if (value >= 0) {
-+ req->length = value;
-+ req->zero = value < ctrl->wLength
-+ && (value % gadget->ep0->maxpacket) == 0;
-+ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
-+ if (value < 0) {
-+ DBG (dev, "ep_queue < 0 --> %d\n", value);
-+ req->status = 0;
-+ zero_setup_complete (gadget->ep0, req);
-+ }
-+ }
-+
-+ /* device either stalls (value < 0) or reports success */
-+ return value;
-+}
-+
-+static void
-+zero_disconnect (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave (&dev->lock, flags);
-+ zero_reset_config (dev);
-+
-+ /* a more significant application might have some non-usb
-+ * activities to quiesce here, saving resources like power
-+ * or pushing the notification up a network stack.
-+ */
-+ spin_unlock_irqrestore (&dev->lock, flags);
-+
-+ /* next we may get setup() calls to enumerate new connections;
-+ * or an unbind() during shutdown (including removing module).
-+ */
-+}
-+
-+static void
-+zero_autoresume (unsigned long _dev)
-+{
-+ struct zero_dev *dev = (struct zero_dev *) _dev;
-+ int status;
-+
-+ /* normally the host would be woken up for something
-+ * more significant than just a timer firing...
-+ */
-+ if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
-+ status = usb_gadget_wakeup (dev->gadget);
-+ DBG (dev, "wakeup --> %d\n", status);
-+ }
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void
-+zero_unbind (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+
-+ DBG (dev, "unbind\n");
-+
-+ /* we've already been disconnected ... no i/o is active */
-+ if (dev->req)
-+ free_ep_req (gadget->ep0, dev->req);
-+ del_timer_sync (&dev->resume);
-+ kfree (dev);
-+ set_gadget_data (gadget, NULL);
-+}
-+
-+static int
-+zero_bind (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev;
-+ //struct usb_ep *ep;
-+
-+ printk("binding\n");
-+ /*
-+ * DRIVER POLICY CHOICE: you may want to do this differently.
-+ * One thing to avoid is reusing a bcdDevice revision code
-+ * with different host-visible configurations or behavior
-+ * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc
-+ */
-+ //device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
-+
-+
-+ /* ok, we made sense of the hardware ... */
-+ dev = kmalloc (sizeof *dev, SLAB_KERNEL);
-+ if (!dev)
-+ return -ENOMEM;
-+ memset (dev, 0, sizeof *dev);
-+ spin_lock_init (&dev->lock);
-+ dev->gadget = gadget;
-+ set_gadget_data (gadget, dev);
-+
-+ /* preallocate control response and buffer */
-+ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
-+ if (!dev->req)
-+ goto enomem;
-+ dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ,
-+ &dev->req->dma, GFP_KERNEL);
-+ if (!dev->req->buf)
-+ goto enomem;
-+
-+ dev->req->complete = zero_setup_complete;
-+
-+ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-+
-+#ifdef CONFIG_USB_GADGET_DUALSPEED
-+ /* assume ep0 uses the same value for both speeds ... */
-+ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
-+
-+ /* and that all endpoints are dual-speed */
-+ //hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
-+ //hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
-+#endif
-+
-+ usb_gadget_set_selfpowered (gadget);
-+
-+ init_timer (&dev->resume);
-+ dev->resume.function = zero_autoresume;
-+ dev->resume.data = (unsigned long) dev;
-+
-+ gadget->ep0->driver_data = dev;
-+
-+ INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
-+ INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
-+ EP_OUT_NAME, EP_IN_NAME);
-+
-+ snprintf (manufacturer, sizeof manufacturer,
-+ UTS_SYSNAME " " UTS_RELEASE " with %s",
-+ gadget->name);
-+
-+ return 0;
-+
-+enomem:
-+ zero_unbind (gadget);
-+ return -ENOMEM;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void
-+zero_suspend (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+
-+ if (gadget->speed == USB_SPEED_UNKNOWN)
-+ return;
-+
-+ if (autoresume) {
-+ mod_timer (&dev->resume, jiffies + (HZ * autoresume));
-+ DBG (dev, "suspend, wakeup in %d seconds\n", autoresume);
-+ } else
-+ DBG (dev, "suspend\n");
-+}
-+
-+static void
-+zero_resume (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+
-+ DBG (dev, "resume\n");
-+ del_timer (&dev->resume);
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static struct usb_gadget_driver zero_driver = {
-+#ifdef CONFIG_USB_GADGET_DUALSPEED
-+ .speed = USB_SPEED_HIGH,
-+#else
-+ .speed = USB_SPEED_FULL,
-+#endif
-+ .function = (char *) longname,
-+ .bind = zero_bind,
-+ .unbind = zero_unbind,
-+
-+ .setup = zero_setup,
-+ .disconnect = zero_disconnect,
-+
-+ .suspend = zero_suspend,
-+ .resume = zero_resume,
-+
-+ .driver = {
-+ .name = (char *) shortname,
-+ // .shutdown = ...
-+ // .suspend = ...
-+ // .resume = ...
-+ },
-+};
-+
-+MODULE_AUTHOR ("David Brownell");
-+MODULE_LICENSE ("Dual BSD/GPL");
-+
-+static struct proc_dir_entry *pdir, *pfile;
-+
-+static int isoc_read_data (char *page, char **start,
-+ off_t off, int count,
-+ int *eof, void *data)
-+{
-+ int i;
-+ static int c = 0;
-+ static int done = 0;
-+ static int s = 0;
-+
-+/*
-+ printk ("\ncount: %d\n", count);
-+ printk ("rbuf_start: %d\n", rbuf_start);
-+ printk ("rbuf_len: %d\n", rbuf_len);
-+ printk ("off: %d\n", off);
-+ printk ("start: %p\n\n", *start);
-+*/
-+ if (done) {
-+ c = 0;
-+ done = 0;
-+ *eof = 1;
-+ return 0;
-+ }
-+
-+ if (c == 0) {
-+ if (rbuf_len == RBUF_LEN)
-+ s = rbuf_start;
-+ else s = 0;
-+ }
-+
-+ for (i=0; i<count && c<rbuf_len; i++, c++) {
-+ page[i] = rbuf[(c+s) % RBUF_LEN];
-+ }
-+ *start = page;
-+
-+ if (c >= rbuf_len) {
-+ *eof = 1;
-+ done = 1;
-+ }
-+
-+
-+ return i;
-+}
-+
-+static int __init init (void)
-+{
-+
-+ int retval = 0;
-+
-+ pdir = proc_mkdir("isoc_test", NULL);
-+ if(pdir == NULL) {
-+ retval = -ENOMEM;
-+ printk("Error creating dir\n");
-+ goto done;
-+ }
-+ pdir->owner = THIS_MODULE;
-+
-+ pfile = create_proc_read_entry("isoc_data",
-+ 0444, pdir,
-+ isoc_read_data,
-+ NULL);
-+ if (pfile == NULL) {
-+ retval = -ENOMEM;
-+ printk("Error creating file\n");
-+ goto no_file;
-+ }
-+ pfile->owner = THIS_MODULE;
-+
-+ return usb_gadget_register_driver (&zero_driver);
-+
-+ no_file:
-+ remove_proc_entry("isoc_data", NULL);
-+ done:
-+ return retval;
-+}
-+module_init (init);
-+
-+static void __exit cleanup (void)
-+{
-+
-+ usb_gadget_unregister_driver (&zero_driver);
-+
-+ remove_proc_entry("isoc_data", pdir);
-+ remove_proc_entry("isoc_test", NULL);
-+}
-+module_exit (cleanup);
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_attr.c
-@@ -0,0 +1,1055 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $
-+ * $Revision: #31 $
-+ * $Date: 2008/07/15 $
-+ * $Change: 1064918 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ *
-+ * The diagnostic interface will provide access to the controller for
-+ * bringing up the hardware and testing. The Linux driver attributes
-+ * feature will be used to provide the Linux Diagnostic
-+ * Interface. These attributes are accessed through sysfs.
-+ */
-+
-+/** @page "Linux Module Attributes"
-+ *
-+ * The Linux module attributes feature is used to provide the Linux
-+ * Diagnostic Interface. These attributes are accessed through sysfs.
-+ * The diagnostic interface will provide access to the controller for
-+ * bringing up the hardware and testing.
-+
-+
-+ The following table shows the attributes.
-+ <table>
-+ <tr>
-+ <td><b> Name</b></td>
-+ <td><b> Description</b></td>
-+ <td><b> Access</b></td>
-+ </tr>
-+
-+ <tr>
-+ <td> mode </td>
-+ <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hnpcapable </td>
-+ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
-+ Read returns the current value.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> srpcapable </td>
-+ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
-+ Read returns the current value.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hnp </td>
-+ <td> Initiates the Host Negotiation Protocol. Read returns the status.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> srp </td>
-+ <td> Initiates the Session Request Protocol. Read returns the status.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> buspower </td>
-+ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> bussuspend </td>
-+ <td> Suspends the USB bus.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> busconnected </td>
-+ <td> Gets the connection status of the bus</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gotgctl </td>
-+ <td> Gets or sets the Core Control Status Register.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gusbcfg </td>
-+ <td> Gets or sets the Core USB Configuration Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> grxfsiz </td>
-+ <td> Gets or sets the Receive FIFO Size Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gnptxfsiz </td>
-+ <td> Gets or sets the non-periodic Transmit Size Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gpvndctl </td>
-+ <td> Gets or sets the PHY Vendor Control Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> ggpio </td>
-+ <td> Gets the value in the lower 16-bits of the General Purpose IO Register
-+ or sets the upper 16 bits.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> guid </td>
-+ <td> Gets or sets the value of the User ID Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gsnpsid </td>
-+ <td> Gets the value of the Synopsys ID Regester</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> devspeed </td>
-+ <td> Gets or sets the device speed setting in the DCFG register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> enumspeed </td>
-+ <td> Gets the device enumeration Speed.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hptxfsiz </td>
-+ <td> Gets the value of the Host Periodic Transmit FIFO</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hprt0 </td>
-+ <td> Gets or sets the value in the Host Port Control and Status Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> regoffset </td>
-+ <td> Sets the register offset for the next Register Access</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> regvalue </td>
-+ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> remote_wakeup </td>
-+ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
-+ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
-+ Wakeup signalling bit in the Device Control Register is set for 1
-+ milli-second.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> regdump </td>
-+ <td> Dumps the contents of core registers.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> spramdump </td>
-+ <td> Dumps the contents of core registers.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hcddump </td>
-+ <td> Dumps the current HCD state.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hcd_frrem </td>
-+ <td> Shows the average value of the Frame Remaining
-+ field in the Host Frame Number/Frame Remaining register when an SOF interrupt
-+ occurs. This can be used to determine the average interrupt latency. Also
-+ shows the average Frame Remaining value for start_transfer and the "a" and
-+ "b" sample points. The "a" and "b" sample points may be used during debugging
-+ bto determine how long it takes to execute a section of the HCD code.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> rd_reg_test </td>
-+ <td> Displays the time required to read the GNPTXFSIZ register many times
-+ (the output shows the number of times the register is read).
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> wr_reg_test </td>
-+ <td> Displays the time required to write the GNPTXFSIZ register many times
-+ (the output shows the number of times the register is written).
-+ <td> Read</td>
-+ </tr>
-+
-+ </table>
-+
-+ Example usage:
-+ To get the current mode:
-+ cat /sys/devices/lm0/mode
-+
-+ To power down the USB:
-+ echo 0 > /sys/devices/lm0/buspower
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/stat.h> /* permission constants */
-+#include <linux/version.h>
-+
-+#include <asm/sizes.h>
-+#include <asm/io.h>
-+//#include <asm/arch/lm.h>
-+#include <mach/lm.h>
-+#include <asm/sizes.h>
-+
-+#include "dwc_otg_plat.h"
-+#include "dwc_otg_attr.h"
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_pcd.h"
-+#include "dwc_otg_hcd.h"
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+/*
-+ * MACROs for defining sysfs attribute
-+ */
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-+{ \
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
-+ uint32_t val; \
-+ val = dwc_read_reg32 (_addr_); \
-+ val = (val & (_mask_)) >> _shift_; \
-+ return sprintf (buf, "%s = 0x%x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
-+ const char *buf, size_t count) \
-+{ \
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
-+ uint32_t set = simple_strtoul(buf, NULL, 16); \
-+ uint32_t clear = set; \
-+ clear = ((~clear) << _shift_) & _mask_; \
-+ set = (set << _shift_) & _mask_; \
-+ dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
-+ dwc_modify_reg32(_addr_, clear, set); \
-+ return count; \
-+}
-+
-+/*
-+ * MACROs for defining sysfs attribute for 32-bit registers
-+ */
-+#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-+{ \
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
-+ uint32_t val; \
-+ val = dwc_read_reg32 (_addr_); \
-+ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
-+ const char *buf, size_t count) \
-+{ \
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
-+ uint32_t val = simple_strtoul(buf, NULL, 16); \
-+ dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
-+ dwc_write_reg32(_addr_, val); \
-+ return count; \
-+}
-+
-+#else
-+
-+/*
-+ * MACROs for defining sysfs attribute
-+ */
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, char *buf) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
-+ uint32_t val; \
-+ val = dwc_read_reg32 (_addr_); \
-+ val = (val & (_mask_)) >> _shift_; \
-+ return sprintf (buf, "%s = 0x%x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, const char *buf, size_t count) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
-+ uint32_t set = simple_strtoul(buf, NULL, 16); \
-+ uint32_t clear = set; \
-+ clear = ((~clear) << _shift_) & _mask_; \
-+ set = (set << _shift_) & _mask_; \
-+ dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
-+ dwc_modify_reg32(_addr_, clear, set); \
-+ return count; \
-+}
-+
-+/*
-+ * MACROs for defining sysfs attribute for 32-bit registers
-+ */
-+#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, char *buf) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
-+ uint32_t val; \
-+ val = dwc_read_reg32 (_addr_); \
-+ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, const char *buf, size_t count) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
-+ uint32_t val = simple_strtoul(buf, NULL, 16); \
-+ dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
-+ dwc_write_reg32(_addr_, val); \
-+ return count; \
-+}
-+
-+#endif
-+
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
-+
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
-+
-+#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
-+DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-+DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
-+
-+#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
-+DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
-+
-+
-+/** @name Functions for Show/Store of Attributes */
-+/**@{*/
-+
-+/**
-+ * Show the register offset of the Register Access.
-+ */
-+static ssize_t regoffset_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset);
-+}
-+
-+/**
-+ * Set the register offset for the next Register Access Read/Write
-+ */
-+static ssize_t regoffset_store( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ const char *buf,
-+ size_t count )
-+{
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ uint32_t offset = simple_strtoul(buf, NULL, 16);
-+ //dev_dbg(_dev, "Offset=0x%08x\n", offset);
-+ if (offset < SZ_256K ) {
-+ otg_dev->reg_offset = offset;
-+ }
-+ else {
-+ dev_err( _dev, "invalid offset\n" );
-+ }
-+
-+ return count;
-+}
-+DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, (void *)regoffset_show, regoffset_store);
-+
-+
-+/**
-+ * Show the value of the register at the offset in the reg_offset
-+ * attribute.
-+ */
-+static ssize_t regvalue_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ uint32_t val;
-+ volatile uint32_t *addr;
-+
-+ if (otg_dev->reg_offset != 0xFFFFFFFF &&
-+ 0 != otg_dev->base) {
-+ /* Calculate the address */
-+ addr = (uint32_t*)(otg_dev->reg_offset +
-+ (uint8_t*)otg_dev->base);
-+ //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
-+ val = dwc_read_reg32( addr );
-+ return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1,
-+ "Reg@0x%06x = 0x%08x\n",
-+ otg_dev->reg_offset, val);
-+ }
-+ else {
-+ dev_err(_dev, "Invalid offset (0x%0x)\n",
-+ otg_dev->reg_offset);
-+ return sprintf(buf, "invalid offset\n" );
-+ }
-+}
-+
-+/**
-+ * Store the value in the register at the offset in the reg_offset
-+ * attribute.
-+ *
-+ */
-+static ssize_t regvalue_store( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ const char *buf,
-+ size_t count )
-+{
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ volatile uint32_t * addr;
-+ uint32_t val = simple_strtoul(buf, NULL, 16);
-+ //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
-+ if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
-+ /* Calculate the address */
-+ addr = (uint32_t*)(otg_dev->reg_offset +
-+ (uint8_t*)otg_dev->base);
-+ //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
-+ dwc_write_reg32( addr, val );
-+ }
-+ else {
-+ dev_err(_dev, "Invalid Register Offset (0x%08x)\n",
-+ otg_dev->reg_offset);
-+ }
-+ return count;
-+}
-+DEVICE_ATTR(regvalue, S_IRUGO|S_IWUSR, regvalue_show, regvalue_store);
-+
-+/*
-+ * Attributes
-+ */
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode");
-+
-+//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
-+//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected");
-+
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID");
-+DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed");
-+
-+DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0");
-+
-+
-+/**
-+ * @todo Add code to initiate the HNP.
-+ */
-+/**
-+ * Show the HNP status bit
-+ */
-+static ssize_t hnp_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ gotgctl_data_t val;
-+ val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
-+ return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs);
-+}
-+
-+/**
-+ * Set the HNP Request bit
-+ */
-+static ssize_t hnp_store( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ const char *buf,
-+ size_t count )
-+{
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ uint32_t in = simple_strtoul(buf, NULL, 16);
-+ uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl);
-+ gotgctl_data_t mem;
-+ mem.d32 = dwc_read_reg32(addr);
-+ mem.b.hnpreq = in;
-+ dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
-+ dwc_write_reg32(addr, mem.d32);
-+ return count;
-+}
-+DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
-+
-+/**
-+ * @todo Add code to initiate the SRP.
-+ */
-+/**
-+ * Show the SRP status bit
-+ */
-+static ssize_t srp_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#ifndef DWC_HOST_ONLY
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ gotgctl_data_t val;
-+ val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
-+ return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs);
-+#else
-+ return sprintf(buf, "Host Only Mode!\n");
-+#endif
-+}
-+
-+
-+
-+/**
-+ * Set the SRP Request bit
-+ */
-+static ssize_t srp_store( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ const char *buf,
-+ size_t count )
-+{
-+#ifndef DWC_HOST_ONLY
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ dwc_otg_pcd_initiate_srp(otg_dev->pcd);
-+#endif
-+ return count;
-+}
-+DEVICE_ATTR(srp, 0644, srp_show, srp_store);
-+
-+/**
-+ * @todo Need to do more for power on/off?
-+ */
-+/**
-+ * Show the Bus Power status
-+ */
-+static ssize_t buspower_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ hprt0_data_t val;
-+ val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
-+ return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr);
-+}
-+
-+
-+/**
-+ * Set the Bus Power status
-+ */
-+static ssize_t buspower_store( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ const char *buf,
-+ size_t count )
-+{
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ uint32_t on = simple_strtoul(buf, NULL, 16);
-+ uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
-+ hprt0_data_t mem;
-+
-+ mem.d32 = dwc_read_reg32(addr);
-+ mem.b.prtpwr = on;
-+
-+ //dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
-+ dwc_write_reg32(addr, mem.d32);
-+
-+ return count;
-+}
-+DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
-+
-+/**
-+ * @todo Need to do more for suspend?
-+ */
-+/**
-+ * Show the Bus Suspend status
-+ */
-+static ssize_t bussuspend_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ hprt0_data_t val;
-+ val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
-+ return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
-+}
-+
-+/**
-+ * Set the Bus Suspend status
-+ */
-+static ssize_t bussuspend_store( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ const char *buf,
-+ size_t count )
-+{
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ uint32_t in = simple_strtoul(buf, NULL, 16);
-+ uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
-+ hprt0_data_t mem;
-+ mem.d32 = dwc_read_reg32(addr);
-+ mem.b.prtsusp = in;
-+ dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
-+ dwc_write_reg32(addr, mem.d32);
-+ return count;
-+}
-+DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
-+
-+/**
-+ * Show the status of Remote Wakeup.
-+ */
-+static ssize_t remote_wakeup_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#ifndef DWC_HOST_ONLY
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ dctl_data_t val;
-+ val.d32 =
-+ dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl);
-+ return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n",
-+ val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable);
-+#else
-+ return sprintf(buf, "Host Only Mode!\n");
-+#endif
-+}
-+/**
-+ * Initiate a remote wakeup of the host. The Device control register
-+ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
-+ * flag is set.
-+ *
-+ */
-+static ssize_t remote_wakeup_store( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ const char *buf,
-+ size_t count )
-+{
-+#ifndef DWC_HOST_ONLY
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ uint32_t val = simple_strtoul(buf, NULL, 16);
-+ if (val&1) {
-+ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
-+ }
-+ else {
-+ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
-+ }
-+#endif
-+ return count;
-+}
-+DEVICE_ATTR(remote_wakeup, S_IRUGO|S_IWUSR, remote_wakeup_show,
-+ remote_wakeup_store);
-+
-+/**
-+ * Dump global registers and either host or device registers (depending on the
-+ * current mode of the core).
-+ */
-+static ssize_t regdump_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ dwc_otg_dump_global_registers( otg_dev->core_if);
-+ if (dwc_otg_is_host_mode(otg_dev->core_if)) {
-+ dwc_otg_dump_host_registers( otg_dev->core_if);
-+ } else {
-+ dwc_otg_dump_dev_registers( otg_dev->core_if);
-+
-+ }
-+ return sprintf( buf, "Register Dump\n" );
-+}
-+
-+DEVICE_ATTR(regdump, S_IRUGO|S_IWUSR, regdump_show, 0);
-+
-+/**
-+ * Dump global registers and either host or device registers (depending on the
-+ * current mode of the core).
-+ */
-+static ssize_t spramdump_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ dwc_otg_dump_spram( otg_dev->core_if);
-+
-+ return sprintf( buf, "SPRAM Dump\n" );
-+}
-+
-+DEVICE_ATTR(spramdump, S_IRUGO|S_IWUSR, spramdump_show, 0);
-+
-+/**
-+ * Dump the current hcd state.
-+ */
-+static ssize_t hcddump_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#ifndef DWC_DEVICE_ONLY
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ dwc_otg_hcd_dump_state(otg_dev->hcd);
-+#endif
-+ return sprintf( buf, "HCD Dump\n" );
-+}
-+
-+DEVICE_ATTR(hcddump, S_IRUGO|S_IWUSR, hcddump_show, 0);
-+
-+/**
-+ * Dump the average frame remaining at SOF. This can be used to
-+ * determine average interrupt latency. Frame remaining is also shown for
-+ * start transfer and two additional sample points.
-+ */
-+static ssize_t hcd_frrem_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#ifndef DWC_DEVICE_ONLY
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ dwc_otg_hcd_dump_frrem(otg_dev->hcd);
-+#endif
-+ return sprintf( buf, "HCD Dump Frame Remaining\n" );
-+}
-+
-+DEVICE_ATTR(hcd_frrem, S_IRUGO|S_IWUSR, hcd_frrem_show, 0);
-+
-+/**
-+ * Displays the time required to read the GNPTXFSIZ register many times (the
-+ * output shows the number of times the register is read).
-+ */
-+#define RW_REG_COUNT 10000000
-+#define MSEC_PER_JIFFIE 1000/HZ
-+static ssize_t rd_reg_test_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ int i;
-+ int time;
-+ int start_jiffies;
-+
-+ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
-+ HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
-+ start_jiffies = jiffies;
-+ for (i = 0; i < RW_REG_COUNT; i++) {
-+ dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
-+ }
-+ time = jiffies - start_jiffies;
-+ return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
-+ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time );
-+}
-+
-+DEVICE_ATTR(rd_reg_test, S_IRUGO|S_IWUSR, rd_reg_test_show, 0);
-+
-+/**
-+ * Displays the time required to write the GNPTXFSIZ register many times (the
-+ * output shows the number of times the register is written).
-+ */
-+static ssize_t wr_reg_test_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev);
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);
-+#else
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+#endif
-+ uint32_t reg_val;
-+ int i;
-+ int time;
-+ int start_jiffies;
-+
-+ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
-+ HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
-+ reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
-+ start_jiffies = jiffies;
-+ for (i = 0; i < RW_REG_COUNT; i++) {
-+ dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val);
-+ }
-+ time = jiffies - start_jiffies;
-+ return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
-+ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
-+}
-+
-+DEVICE_ATTR(wr_reg_test, S_IRUGO|S_IWUSR, wr_reg_test_show, 0);
-+/**@}*/
-+
-+/**
-+ * Create the device files
-+ */
-+void dwc_otg_attr_create (struct lm_device *lmdev)
-+{
-+ int error;
-+
-+ error = device_create_file(&lmdev->dev, &dev_attr_regoffset);
-+ error = device_create_file(&lmdev->dev, &dev_attr_regvalue);
-+ error = device_create_file(&lmdev->dev, &dev_attr_mode);
-+ error = device_create_file(&lmdev->dev, &dev_attr_hnpcapable);
-+ error = device_create_file(&lmdev->dev, &dev_attr_srpcapable);
-+ error = device_create_file(&lmdev->dev, &dev_attr_hnp);
-+ error = device_create_file(&lmdev->dev, &dev_attr_srp);
-+ error = device_create_file(&lmdev->dev, &dev_attr_buspower);
-+ error = device_create_file(&lmdev->dev, &dev_attr_bussuspend);
-+ error = device_create_file(&lmdev->dev, &dev_attr_busconnected);
-+ error = device_create_file(&lmdev->dev, &dev_attr_gotgctl);
-+ error = device_create_file(&lmdev->dev, &dev_attr_gusbcfg);
-+ error = device_create_file(&lmdev->dev, &dev_attr_grxfsiz);
-+ error = device_create_file(&lmdev->dev, &dev_attr_gnptxfsiz);
-+ error = device_create_file(&lmdev->dev, &dev_attr_gpvndctl);
-+ error = device_create_file(&lmdev->dev, &dev_attr_ggpio);
-+ error = device_create_file(&lmdev->dev, &dev_attr_guid);
-+ error = device_create_file(&lmdev->dev, &dev_attr_gsnpsid);
-+ error = device_create_file(&lmdev->dev, &dev_attr_devspeed);
-+ error = device_create_file(&lmdev->dev, &dev_attr_enumspeed);
-+ error = device_create_file(&lmdev->dev, &dev_attr_hptxfsiz);
-+ error = device_create_file(&lmdev->dev, &dev_attr_hprt0);
-+ error = device_create_file(&lmdev->dev, &dev_attr_remote_wakeup);
-+ error = device_create_file(&lmdev->dev, &dev_attr_regdump);
-+ error = device_create_file(&lmdev->dev, &dev_attr_spramdump);
-+ error = device_create_file(&lmdev->dev, &dev_attr_hcddump);
-+ error = device_create_file(&lmdev->dev, &dev_attr_hcd_frrem);
-+ error = device_create_file(&lmdev->dev, &dev_attr_rd_reg_test);
-+ error = device_create_file(&lmdev->dev, &dev_attr_wr_reg_test);
-+}
-+
-+/**
-+ * Remove the device files
-+ */
-+void dwc_otg_attr_remove (struct lm_device *lmdev)
-+{
-+ device_remove_file(&lmdev->dev, &dev_attr_regoffset);
-+ device_remove_file(&lmdev->dev, &dev_attr_regvalue);
-+ device_remove_file(&lmdev->dev, &dev_attr_mode);
-+ device_remove_file(&lmdev->dev, &dev_attr_hnpcapable);
-+ device_remove_file(&lmdev->dev, &dev_attr_srpcapable);
-+ device_remove_file(&lmdev->dev, &dev_attr_hnp);
-+ device_remove_file(&lmdev->dev, &dev_attr_srp);
-+ device_remove_file(&lmdev->dev, &dev_attr_buspower);
-+ device_remove_file(&lmdev->dev, &dev_attr_bussuspend);
-+ device_remove_file(&lmdev->dev, &dev_attr_busconnected);
-+ device_remove_file(&lmdev->dev, &dev_attr_gotgctl);
-+ device_remove_file(&lmdev->dev, &dev_attr_gusbcfg);
-+ device_remove_file(&lmdev->dev, &dev_attr_grxfsiz);
-+ device_remove_file(&lmdev->dev, &dev_attr_gnptxfsiz);
-+ device_remove_file(&lmdev->dev, &dev_attr_gpvndctl);
-+ device_remove_file(&lmdev->dev, &dev_attr_ggpio);
-+ device_remove_file(&lmdev->dev, &dev_attr_guid);
-+ device_remove_file(&lmdev->dev, &dev_attr_gsnpsid);
-+ device_remove_file(&lmdev->dev, &dev_attr_devspeed);
-+ device_remove_file(&lmdev->dev, &dev_attr_enumspeed);
-+ device_remove_file(&lmdev->dev, &dev_attr_hptxfsiz);
-+ device_remove_file(&lmdev->dev, &dev_attr_hprt0);
-+ device_remove_file(&lmdev->dev, &dev_attr_remote_wakeup);
-+ device_remove_file(&lmdev->dev, &dev_attr_regdump);
-+ device_remove_file(&lmdev->dev, &dev_attr_spramdump);
-+ device_remove_file(&lmdev->dev, &dev_attr_hcddump);
-+ device_remove_file(&lmdev->dev, &dev_attr_hcd_frrem);
-+ device_remove_file(&lmdev->dev, &dev_attr_rd_reg_test);
-+ device_remove_file(&lmdev->dev, &dev_attr_wr_reg_test);
-+}
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_attr.h
-@@ -0,0 +1,67 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $
-+ * $Revision: #7 $
-+ * $Date: 2005/03/28 $
-+ * $Change: 477051 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#if !defined(__DWC_OTG_ATTR_H__)
-+#define __DWC_OTG_ATTR_H__
-+
-+/** @file
-+ * This file contains the interface to the Linux device attributes.
-+ */
-+extern struct device_attribute dev_attr_regoffset;
-+extern struct device_attribute dev_attr_regvalue;
-+
-+extern struct device_attribute dev_attr_mode;
-+extern struct device_attribute dev_attr_hnpcapable;
-+extern struct device_attribute dev_attr_srpcapable;
-+extern struct device_attribute dev_attr_hnp;
-+extern struct device_attribute dev_attr_srp;
-+extern struct device_attribute dev_attr_buspower;
-+extern struct device_attribute dev_attr_bussuspend;
-+extern struct device_attribute dev_attr_busconnected;
-+extern struct device_attribute dev_attr_gotgctl;
-+extern struct device_attribute dev_attr_gusbcfg;
-+extern struct device_attribute dev_attr_grxfsiz;
-+extern struct device_attribute dev_attr_gnptxfsiz;
-+extern struct device_attribute dev_attr_gpvndctl;
-+extern struct device_attribute dev_attr_ggpio;
-+extern struct device_attribute dev_attr_guid;
-+extern struct device_attribute dev_attr_gsnpsid;
-+extern struct device_attribute dev_attr_devspeed;
-+extern struct device_attribute dev_attr_enumspeed;
-+extern struct device_attribute dev_attr_hptxfsiz;
-+extern struct device_attribute dev_attr_hprt0;
-+
-+void dwc_otg_attr_create (struct lm_device *lmdev);
-+void dwc_otg_attr_remove (struct lm_device *lmdev);
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_cil.c
-@@ -0,0 +1,3842 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $
-+ * $Revision: #147 $
-+ * $Date: 2008/10/16 $
-+ * $Change: 1117667 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ *
-+ * The Core Interface Layer provides basic services for accessing and
-+ * managing the DWC_otg hardware. These services are used by both the
-+ * Host Controller Driver and the Peripheral Controller Driver.
-+ *
-+ * The CIL manages the memory map for the core so that the HCD and PCD
-+ * don't have to do this separately. It also handles basic tasks like
-+ * reading/writing the registers and data FIFOs in the controller.
-+ * Some of the data access functions provide encapsulation of several
-+ * operations required to perform a task, such as writing multiple
-+ * registers to start a transfer. Finally, the CIL performs basic
-+ * services that are not specific to either the host or device modes
-+ * of operation. These services include management of the OTG Host
-+ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
-+ * Diagnostic API is also provided to allow testing of the controller
-+ * hardware.
-+ *
-+ * The Core Interface Layer has the following requirements:
-+ * - Provides basic controller operations.
-+ * - Minimal use of OS services.
-+ * - The OS services used will be abstracted by using inline functions
-+ * or macros.
-+ *
-+ */
-+#include <asm/unaligned.h>
-+#include <linux/dma-mapping.h>
-+#ifdef DEBUG
-+#include <linux/jiffies.h>
-+#endif
-+
-+#include "dwc_otg_plat.h"
-+#include "dwc_otg_regs.h"
-+#include "dwc_otg_cil.h"
-+#include "dwc_otg_pcd.h"
-+
-+
-+/**
-+ * This function is called to initialize the DWC_otg CSR data
-+ * structures. The register addresses in the device and host
-+ * structures are initialized from the base address supplied by the
-+ * caller. The calling function must make the OS calls to get the
-+ * base address of the DWC_otg controller registers. The core_params
-+ * argument holds the parameters that specify how the core should be
-+ * configured.
-+ *
-+ * @param[in] reg_base_addr Base address of DWC_otg core registers
-+ * @param[in] core_params Pointer to the core configuration parameters
-+ *
-+ */
-+dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *reg_base_addr,
-+ dwc_otg_core_params_t *core_params)
-+{
-+ dwc_otg_core_if_t *core_if = 0;
-+ dwc_otg_dev_if_t *dev_if = 0;
-+ dwc_otg_host_if_t *host_if = 0;
-+ uint8_t *reg_base = (uint8_t *)reg_base_addr;
-+ int i = 0;
-+
-+ DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, reg_base_addr, core_params);
-+
-+ core_if = kmalloc(sizeof(dwc_otg_core_if_t), GFP_KERNEL);
-+
-+ if (core_if == 0) {
-+ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n");
-+ return 0;
-+ }
-+
-+ memset(core_if, 0, sizeof(dwc_otg_core_if_t));
-+
-+ core_if->core_params = core_params;
-+ core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base;
-+
-+ /*
-+ * Allocate the Device Mode structures.
-+ */
-+ dev_if = kmalloc(sizeof(dwc_otg_dev_if_t), GFP_KERNEL);
-+
-+ if (dev_if == 0) {
-+ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
-+ kfree(core_if);
-+ return 0;
-+ }
-+
-+ dev_if->dev_global_regs =
-+ (dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET);
-+
-+ for (i=0; i<MAX_EPS_CHANNELS; i++)
-+ {
-+ dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
-+ (reg_base + DWC_DEV_IN_EP_REG_OFFSET +
-+ (i * DWC_EP_REG_OFFSET));
-+
-+ dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
-+ (reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
-+ (i * DWC_EP_REG_OFFSET));
-+ DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
-+ i, &dev_if->in_ep_regs[i]->diepctl);
-+ DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
-+ i, &dev_if->out_ep_regs[i]->doepctl);
-+ }
-+
-+ dev_if->speed = 0; // unknown
-+
-+ core_if->dev_if = dev_if;
-+
-+ /*
-+ * Allocate the Host Mode structures.
-+ */
-+ host_if = kmalloc(sizeof(dwc_otg_host_if_t), GFP_KERNEL);
-+
-+ if (host_if == 0) {
-+ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n");
-+ kfree(dev_if);
-+ kfree(core_if);
-+ return 0;
-+ }
-+
-+ host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
-+ (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
-+
-+ host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
-+
-+ for (i=0; i<MAX_EPS_CHANNELS; i++)
-+ {
-+ host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
-+ (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
-+ (i * DWC_OTG_CHAN_REGS_OFFSET));
-+ DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
-+ i, &host_if->hc_regs[i]->hcchar);
-+ }
-+
-+ host_if->num_host_channels = MAX_EPS_CHANNELS;
-+ core_if->host_if = host_if;
-+
-+ for (i=0; i<MAX_EPS_CHANNELS; i++)
-+ {
-+ core_if->data_fifo[i] =
-+ (uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET +
-+ (i * DWC_OTG_DATA_FIFO_SIZE));
-+ DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
-+ i, (unsigned)core_if->data_fifo[i]);
-+ }
-+
-+ core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET);
-+
-+ /*
-+ * Store the contents of the hardware configuration registers here for
-+ * easy access later.
-+ */
-+ core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1);
-+ core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2);
-+ core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3);
-+ core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4);
-+
-+ DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32);
-+ DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32);
-+ DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32);
-+ DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32);
-+
-+ core_if->hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
-+ core_if->dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
-+
-+ DWC_DEBUGPL(DBG_CILV,"hcfg=%08x\n",core_if->hcfg.d32);
-+ DWC_DEBUGPL(DBG_CILV,"dcfg=%08x\n",core_if->dcfg.d32);
-+
-+ DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode);
-+ DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture);
-+ DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep);
-+ DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan);
-+ DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth);
-+ DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth);
-+ DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth);
-+
-+ DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth);
-+ DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width);
-+
-+ /*
-+ * Set the SRP sucess bit for FS-I2c
-+ */
-+ core_if->srp_success = 0;
-+ core_if->srp_timer_started = 0;
-+
-+
-+ /*
-+ * Create new workqueue and init works
-+ */
-+ core_if->wq_otg = create_singlethread_workqueue("dwc_otg");
-+ if(core_if->wq_otg == 0) {
-+ DWC_DEBUGPL(DBG_CIL, "Creation of wq_otg failed\n");
-+ kfree(host_if);
-+ kfree(dev_if);
-+ kfree(core_if);
-+ return 0 * HZ;
-+ }
-+
-+
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+
-+ INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change, core_if);
-+ INIT_WORK(&core_if->w_wkp, w_wakeup_detected, core_if);
-+
-+#else
-+
-+ INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change);
-+ INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected);
-+
-+#endif
-+ return core_if;
-+}
-+
-+/**
-+ * This function frees the structures allocated by dwc_otg_cil_init().
-+ *
-+ * @param[in] core_if The core interface pointer returned from
-+ * dwc_otg_cil_init().
-+ *
-+ */
-+void dwc_otg_cil_remove(dwc_otg_core_if_t *core_if)
-+{
-+ /* Disable all interrupts */
-+ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 1, 0);
-+ dwc_write_reg32(&core_if->core_global_regs->gintmsk, 0);
-+
-+ if (core_if->wq_otg) {
-+ destroy_workqueue(core_if->wq_otg);
-+ }
-+ if (core_if->dev_if) {
-+ kfree(core_if->dev_if);
-+ }
-+ if (core_if->host_if) {
-+ kfree(core_if->host_if);
-+ }
-+ kfree(core_if);
-+}
-+
-+/**
-+ * This function enables the controller's Global Interrupt in the AHB Config
-+ * register.
-+ *
-+ * @param[in] core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t *core_if)
-+{
-+ gahbcfg_data_t ahbcfg = { .d32 = 0};
-+ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
-+ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
-+}
-+
-+/**
-+ * This function disables the controller's Global Interrupt in the AHB Config
-+ * register.
-+ *
-+ * @param[in] core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t *core_if)
-+{
-+ gahbcfg_data_t ahbcfg = { .d32 = 0};
-+ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
-+ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
-+}
-+
-+/**
-+ * This function initializes the commmon interrupts, used in both
-+ * device and host modes.
-+ *
-+ * @param[in] core_if Programming view of the DWC_otg controller
-+ *
-+ */
-+static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+
-+ /* Clear any pending OTG Interrupts */
-+ dwc_write_reg32(&global_regs->gotgint, 0xFFFFFFFF);
-+
-+ /* Clear any pending interrupts */
-+ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /*
-+ * Enable the interrupts in the GINTMSK.
-+ */
-+ intr_mask.b.modemismatch = 1;
-+ intr_mask.b.otgintr = 1;
-+
-+ if (!core_if->dma_enable) {
-+ intr_mask.b.rxstsqlvl = 1;
-+ }
-+
-+ intr_mask.b.conidstschng = 1;
-+ intr_mask.b.wkupintr = 1;
-+ intr_mask.b.disconnect = 1;
-+ intr_mask.b.usbsuspend = 1;
-+ intr_mask.b.sessreqintr = 1;
-+ dwc_write_reg32(&global_regs->gintmsk, intr_mask.d32);
-+}
-+
-+/**
-+ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
-+ * type.
-+ */
-+static void init_fslspclksel(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t val;
-+ hcfg_data_t hcfg;
-+
-+ if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
-+ (core_if->hwcfg2.b.fs_phy_type == 1) &&
-+ (core_if->core_params->ulpi_fs_ls)) ||
-+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
-+ /* Full speed PHY */
-+ val = DWC_HCFG_48_MHZ;
-+ }
-+ else {
-+ /* High speed PHY running at full speed or high speed */
-+ val = DWC_HCFG_30_60_MHZ;
-+ }
-+
-+ DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
-+ hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
-+ hcfg.b.fslspclksel = val;
-+ dwc_write_reg32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
-+}
-+
-+/**
-+ * Initializes the DevSpd field of the DCFG register depending on the PHY type
-+ * and the enumeration speed of the device.
-+ */
-+static void init_devspd(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t val;
-+ dcfg_data_t dcfg;
-+
-+ if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
-+ (core_if->hwcfg2.b.fs_phy_type == 1) &&
-+ (core_if->core_params->ulpi_fs_ls)) ||
-+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
-+ /* Full speed PHY */
-+ val = 0x3;
-+ }
-+ else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
-+ /* High speed PHY running at full speed */
-+ val = 0x1;
-+ }
-+ else {
-+ /* High speed PHY running at high speed */
-+ val = 0x0;
-+ }
-+
-+ DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
-+
-+ dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
-+ dcfg.b.devspd = val;
-+ dwc_write_reg32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
-+}
-+
-+/**
-+ * This function calculates the number of IN EPS
-+ * using GHWCFG1 and GHWCFG2 registers values
-+ *
-+ * @param core_if Programming view of the DWC_otg controller
-+ */
-+static uint32_t calc_num_in_eps(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t num_in_eps = 0;
-+ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
-+ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3;
-+ uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps;
-+ int i;
-+
-+
-+ for(i = 0; i < num_eps; ++i)
-+ {
-+ if(!(hwcfg1 & 0x1))
-+ num_in_eps++;
-+
-+ hwcfg1 >>= 2;
-+ }
-+
-+ if(core_if->hwcfg4.b.ded_fifo_en) {
-+ num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
-+ }
-+
-+ return num_in_eps;
-+}
-+
-+
-+/**
-+ * This function calculates the number of OUT EPS
-+ * using GHWCFG1 and GHWCFG2 registers values
-+ *
-+ * @param core_if Programming view of the DWC_otg controller
-+ */
-+static uint32_t calc_num_out_eps(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t num_out_eps = 0;
-+ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
-+ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2;
-+ int i;
-+
-+ for(i = 0; i < num_eps; ++i)
-+ {
-+ if(!(hwcfg1 & 0x2))
-+ num_out_eps++;
-+
-+ hwcfg1 >>= 2;
-+ }
-+ return num_out_eps;
-+}
-+/**
-+ * This function initializes the DWC_otg controller registers and
-+ * prepares the core for device mode or host mode operation.
-+ *
-+ * @param core_if Programming view of the DWC_otg controller
-+ *
-+ */
-+void dwc_otg_core_init(dwc_otg_core_if_t *core_if)
-+{
-+ int i = 0;
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ gahbcfg_data_t ahbcfg = { .d32 = 0 };
-+ gusbcfg_data_t usbcfg = { .d32 = 0 };
-+ gi2cctl_data_t i2cctl = { .d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n", core_if);
-+
-+ /* Common Initialization */
-+
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+
-+// usbcfg.b.tx_end_delay = 1;
-+ /* Program the ULPI External VBUS bit if needed */
-+ usbcfg.b.ulpi_ext_vbus_drv =
-+ (core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
-+
-+ /* Set external TS Dline pulsing */
-+ usbcfg.b.term_sel_dl_pulse = (core_if->core_params->ts_dline == 1) ? 1 : 0;
-+ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-+
-+
-+ /* Reset the Controller */
-+ dwc_otg_core_reset(core_if);
-+
-+ /* Initialize parameters from Hardware configuration registers. */
-+ dev_if->num_in_eps = calc_num_in_eps(core_if);
-+ dev_if->num_out_eps = calc_num_out_eps(core_if);
-+
-+
-+ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", core_if->hwcfg4.b.num_dev_perio_in_ep);
-+
-+ for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
-+ {
-+ dev_if->perio_tx_fifo_size[i] =
-+ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
-+ DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n",
-+ i, dev_if->perio_tx_fifo_size[i]);
-+ }
-+
-+ for (i=0; i < core_if->hwcfg4.b.num_in_eps; i++)
-+ {
-+ dev_if->tx_fifo_size[i] =
-+ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
-+ DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n",
-+ i, dev_if->perio_tx_fifo_size[i]);
-+ }
-+
-+ core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth;
-+ core_if->rx_fifo_size =
-+ dwc_read_reg32(&global_regs->grxfsiz);
-+ core_if->nperio_tx_fifo_size =
-+ dwc_read_reg32(&global_regs->gnptxfsiz) >> 16;
-+
-+ DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", core_if->nperio_tx_fifo_size);
-+
-+ /* This programming sequence needs to happen in FS mode before any other
-+ * programming occurs */
-+ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
-+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
-+ /* If FS mode with FS PHY */
-+
-+ /* core_init() is now called on every switch so only call the
-+ * following for the first time through. */
-+ if (!core_if->phy_init_done) {
-+ core_if->phy_init_done = 1;
-+ DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ usbcfg.b.physel = 1;
-+ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Reset after a PHY select */
-+ dwc_otg_core_reset(core_if);
-+ }
-+
-+ /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
-+ * do this on HNP Dev/Host mode switches (done in dev_init and
-+ * host_init). */
-+ if (dwc_otg_is_host_mode(core_if)) {
-+ init_fslspclksel(core_if);
-+ }
-+ else {
-+ init_devspd(core_if);
-+ }
-+
-+ if (core_if->core_params->i2c_enable) {
-+ DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
-+ /* Program GUSBCFG.OtgUtmifsSel to I2C */
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ usbcfg.b.otgutmifssel = 1;
-+ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Program GI2CCTL.I2CEn */
-+ i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl);
-+ i2cctl.b.i2cdevaddr = 1;
-+ i2cctl.b.i2cen = 0;
-+ dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
-+ i2cctl.b.i2cen = 1;
-+ dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
-+ }
-+
-+ } /* endif speed == DWC_SPEED_PARAM_FULL */
-+
-+ else {
-+ /* High speed PHY. */
-+ if (!core_if->phy_init_done) {
-+ core_if->phy_init_done = 1;
-+ /* HS PHY parameters. These parameters are preserved
-+ * during soft reset so only program the first time. Do
-+ * a soft reset immediately after setting phyif. */
-+ usbcfg.b.ulpi_utmi_sel = core_if->core_params->phy_type;
-+ if (usbcfg.b.ulpi_utmi_sel == 1) {
-+ /* ULPI interface */
-+ usbcfg.b.phyif = 0;
-+ usbcfg.b.ddrsel = core_if->core_params->phy_ulpi_ddr;
-+ }
-+ else {
-+ /* UTMI+ interface */
-+ if (core_if->core_params->phy_utmi_width == 16) {
-+ usbcfg.b.phyif = 1;
-+ }
-+ else {
-+ usbcfg.b.phyif = 0;
-+ }
-+ }
-+
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Reset after setting the PHY parameters */
-+ dwc_otg_core_reset(core_if);
-+ }
-+ }
-+
-+ if ((core_if->hwcfg2.b.hs_phy_type == 2) &&
-+ (core_if->hwcfg2.b.fs_phy_type == 1) &&
-+ (core_if->core_params->ulpi_fs_ls)) {
-+ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ usbcfg.b.ulpi_fsls = 1;
-+ usbcfg.b.ulpi_clk_sus_m = 1;
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+ }
-+ else {
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ usbcfg.b.ulpi_fsls = 0;
-+ usbcfg.b.ulpi_clk_sus_m = 0;
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+ }
-+
-+ /* Program the GAHBCFG Register.*/
-+ switch (core_if->hwcfg2.b.architecture) {
-+
-+ case DWC_SLAVE_ONLY_ARCH:
-+ DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
-+ ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
-+ ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
-+ core_if->dma_enable = 0;
-+ core_if->dma_desc_enable = 0;
-+ break;
-+
-+ case DWC_EXT_DMA_ARCH:
-+ DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
-+ ahbcfg.b.hburstlen = core_if->core_params->dma_burst_size;
-+ core_if->dma_enable = (core_if->core_params->dma_enable != 0);
-+ core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
-+ break;
-+
-+ case DWC_INT_DMA_ARCH:
-+ DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
-+ ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR;
-+ core_if->dma_enable = (core_if->core_params->dma_enable != 0);
-+ core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
-+ break;
-+
-+ }
-+ ahbcfg.b.dmaenable = core_if->dma_enable;
-+ dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32);
-+
-+ core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en;
-+
-+ core_if->pti_enh_enable = core_if->core_params->pti_enable != 0;
-+ core_if->multiproc_int_enable = core_if->core_params->mpi_enable;
-+ DWC_PRINT("Periodic Transfer Interrupt Enhancement - %s\n", ((core_if->pti_enh_enable) ? "enabled": "disabled"));
-+ DWC_PRINT("Multiprocessor Interrupt Enhancement - %s\n", ((core_if->multiproc_int_enable) ? "enabled": "disabled"));
-+
-+ /*
-+ * Program the GUSBCFG register.
-+ */
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+
-+ switch (core_if->hwcfg2.b.op_mode) {
-+ case DWC_MODE_HNP_SRP_CAPABLE:
-+ usbcfg.b.hnpcap = (core_if->core_params->otg_cap ==
-+ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
-+ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_SRP_ONLY_CAPABLE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_NO_HNP_SRP_CAPABLE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = 0;
-+ break;
-+
-+ case DWC_MODE_SRP_CAPABLE_DEVICE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = 0;
-+ break;
-+
-+ case DWC_MODE_SRP_CAPABLE_HOST:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_NO_SRP_CAPABLE_HOST:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = 0;
-+ break;
-+ }
-+
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Enable common interrupts */
-+ dwc_otg_enable_common_interrupts(core_if);
-+
-+ /* Do device or host intialization based on mode during PCD
-+ * and HCD initialization */
-+ if (dwc_otg_is_host_mode(core_if)) {
-+ DWC_DEBUGPL(DBG_ANY, "Host Mode\n");
-+ core_if->op_state = A_HOST;
-+ }
-+ else {
-+ DWC_DEBUGPL(DBG_ANY, "Device Mode\n");
-+ core_if->op_state = B_PERIPHERAL;
-+#ifdef DWC_DEVICE_ONLY
-+ dwc_otg_core_dev_init(core_if);
-+#endif
-+ }
-+}
-+
-+
-+/**
-+ * This function enables the Device mode interrupts.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ */
-+void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *core_if)
-+{
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+
-+ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-+
-+ /* Disable all interrupts. */
-+ dwc_write_reg32(&global_regs->gintmsk, 0);
-+
-+ /* Clear any pending interrupts */
-+ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* Enable the common interrupts */
-+ dwc_otg_enable_common_interrupts(core_if);
-+
-+ /* Enable interrupts */
-+ intr_mask.b.usbreset = 1;
-+ intr_mask.b.enumdone = 1;
-+
-+ if(!core_if->multiproc_int_enable) {
-+ intr_mask.b.inepintr = 1;
-+ intr_mask.b.outepintr = 1;
-+ }
-+
-+ intr_mask.b.erlysuspend = 1;
-+
-+ if(core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.epmismatch = 1;
-+ }
-+
-+
-+#ifdef DWC_EN_ISOC
-+ if(core_if->dma_enable) {
-+ if(core_if->dma_desc_enable == 0) {
-+ if(core_if->pti_enh_enable) {
-+ dctl_data_t dctl = { .d32 = 0 };
-+ dctl.b.ifrmnum = 1;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
-+ } else {
-+ intr_mask.b.incomplisoin = 1;
-+ intr_mask.b.incomplisoout = 1;
-+ }
-+ }
-+ } else {
-+ intr_mask.b.incomplisoin = 1;
-+ intr_mask.b.incomplisoout = 1;
-+ }
-+#endif // DWC_EN_ISOC
-+
-+/** @todo NGS: Should this be a module parameter? */
-+#ifdef USE_PERIODIC_EP
-+ intr_mask.b.isooutdrop = 1;
-+ intr_mask.b.eopframe = 1;
-+ intr_mask.b.incomplisoin = 1;
-+ intr_mask.b.incomplisoout = 1;
-+#endif
-+
-+ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-+
-+ DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
-+ dwc_read_reg32(&global_regs->gintmsk));
-+}
-+
-+/**
-+ * This function initializes the DWC_otg controller registers for
-+ * device mode.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ *
-+ */
-+void dwc_otg_core_dev_init(dwc_otg_core_if_t *core_if)
-+{
-+ int i,size;
-+ u_int32_t *default_value_array;
-+
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ dwc_otg_core_params_t *params = core_if->core_params;
-+ dcfg_data_t dcfg = { .d32 = 0};
-+ grstctl_t resetctl = { .d32 = 0 };
-+ uint32_t rx_fifo_size;
-+ fifosize_data_t nptxfifosize;
-+ fifosize_data_t txfifosize;
-+ dthrctl_data_t dthrctl;
-+
-+ /* Restart the Phy Clock */
-+ dwc_write_reg32(core_if->pcgcctl, 0);
-+
-+ /* Device configuration register */
-+ init_devspd(core_if);
-+ dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
-+ dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0;
-+ dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
-+
-+ dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
-+
-+ /* Configure data FIFO sizes */
-+ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
-+ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", core_if->total_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size);
-+
-+ /* Rx FIFO */
-+ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->grxfsiz));
-+
-+ rx_fifo_size = params->dev_rx_fifo_size;
-+ dwc_write_reg32(&global_regs->grxfsiz, rx_fifo_size);
-+
-+ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->grxfsiz));
-+
-+ /** Set Periodic Tx FIFO Mask all bits 0 */
-+ core_if->p_tx_msk = 0;
-+
-+ /** Set Tx FIFO Mask all bits 0 */
-+ core_if->tx_msk = 0;
-+
-+ /* Non-periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->gnptxfsiz));
-+
-+ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
-+ nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
-+
-+ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
-+
-+ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->gnptxfsiz));
-+
-+ txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
-+ if(core_if->en_multiple_tx_fifo == 0) {
-+ //core_if->hwcfg4.b.ded_fifo_en==0
-+
-+ /**@todo NGS: Fix Periodic FIFO Sizing! */
-+ /*
-+ * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
-+ * Indexes of the FIFO size module parameters in the
-+ * dev_perio_tx_fifo_size array and the FIFO size registers in
-+ * the dptxfsiz array run from 0 to 14.
-+ */
-+ /** @todo Finish debug of this */
-+ size=core_if->hwcfg4.b.num_dev_perio_in_ep;
-+ default_value_array=params->dev_perio_tx_fifo_size;
-+
-+ }
-+ else {
-+ //core_if->hwcfg4.b.ded_fifo_en==1
-+ /*
-+ * Tx FIFOs These FIFOs are numbered from 1 to 15.
-+ * Indexes of the FIFO size module parameters in the
-+ * dev_tx_fifo_size array and the FIFO size registers in
-+ * the dptxfsiz_dieptxf array run from 0 to 14.
-+ */
-+
-+ size=core_if->hwcfg4.b.num_in_eps;
-+ default_value_array=params->dev_tx_fifo_size;
-+
-+ }
-+ for (i=0; i < size; i++)
-+ {
-+
-+ txfifosize.b.depth = default_value_array[i];
-+ DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i,
-+ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
-+ dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],
-+ txfifosize.d32);
-+ DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i,
-+ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
-+ txfifosize.b.startaddr += txfifosize.b.depth;
-+ }
-+ }
-+ /* Flush the FIFOs */
-+ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */
-+ dwc_otg_flush_rx_fifo(core_if);
-+
-+ /* Flush the Learning Queue. */
-+ resetctl.b.intknqflsh = 1;
-+ dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
-+
-+ /* Clear all pending Device Interrupts */
-+
-+ if(core_if->multiproc_int_enable) {
-+ }
-+
-+ /** @todo - if the condition needed to be checked
-+ * or in any case all pending interrutps should be cleared?
-+ */
-+ if(core_if->multiproc_int_enable) {
-+ for(i = 0; i < core_if->dev_if->num_in_eps; ++i) {
-+ dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[i], 0);
-+ }
-+
-+ for(i = 0; i < core_if->dev_if->num_out_eps; ++i) {
-+ dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[i], 0);
-+ }
-+
-+ dwc_write_reg32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF);
-+ dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, 0);
-+ } else {
-+ dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, 0);
-+ dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, 0);
-+ dwc_write_reg32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF);
-+ dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, 0);
-+ }
-+
-+ for (i=0; i <= dev_if->num_in_eps; i++)
-+ {
-+ depctl_data_t depctl;
-+ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
-+ if (depctl.b.epena) {
-+ depctl.d32 = 0;
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+ }
-+ else {
-+ depctl.d32 = 0;
-+ }
-+
-+ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
-+
-+
-+ dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
-+ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0);
-+ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
-+ }
-+
-+ for (i=0; i <= dev_if->num_out_eps; i++)
-+ {
-+ depctl_data_t depctl;
-+ depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
-+ if (depctl.b.epena) {
-+ depctl.d32 = 0;
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+ }
-+ else {
-+ depctl.d32 = 0;
-+ }
-+
-+ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32);
-+
-+ dwc_write_reg32(&dev_if->out_ep_regs[i]->doeptsiz, 0);
-+ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepdma, 0);
-+ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepint, 0xFF);
-+ }
-+
-+ if(core_if->en_multiple_tx_fifo && core_if->dma_enable) {
-+ dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1;
-+ dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1;
-+ dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1;
-+
-+ dev_if->rx_thr_length = params->rx_thr_length;
-+ dev_if->tx_thr_length = params->tx_thr_length;
-+
-+ dev_if->setup_desc_index = 0;
-+
-+ dthrctl.d32 = 0;
-+ dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
-+ dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
-+ dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
-+ dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
-+ dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
-+
-+ dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl, dthrctl.d32);
-+
-+ DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
-+ dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, dthrctl.b.rx_thr_len);
-+
-+ }
-+
-+ dwc_otg_enable_device_interrupts(core_if);
-+
-+ {
-+ diepmsk_data_t msk = { .d32 = 0 };
-+ msk.b.txfifoundrn = 1;
-+ if(core_if->multiproc_int_enable) {
-+ dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], msk.d32, msk.d32);
-+ } else {
-+ dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32, msk.d32);
-+ }
-+ }
-+
-+
-+ if(core_if->multiproc_int_enable) {
-+ /* Set NAK on Babble */
-+ dctl_data_t dctl = { .d32 = 0};
-+ dctl.b.nakonbble = 1;
-+ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
-+ }
-+}
-+
-+/**
-+ * This function enables the Host mode interrupts.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ */
-+void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ gintmsk_data_t intr_mask = { .d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-+
-+ /* Disable all interrupts. */
-+ dwc_write_reg32(&global_regs->gintmsk, 0);
-+
-+ /* Clear any pending interrupts. */
-+ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* Enable the common interrupts */
-+ dwc_otg_enable_common_interrupts(core_if);
-+
-+ /*
-+ * Enable host mode interrupts without disturbing common
-+ * interrupts.
-+ */
-+ intr_mask.b.sofintr = 1;
-+ intr_mask.b.portintr = 1;
-+ intr_mask.b.hcintr = 1;
-+
-+ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-+}
-+
-+/**
-+ * This function disables the Host Mode interrupts.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ */
-+void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+ gintmsk_data_t intr_mask = { .d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
-+
-+ /*
-+ * Disable host mode interrupts without disturbing common
-+ * interrupts.
-+ */
-+ intr_mask.b.sofintr = 1;
-+ intr_mask.b.portintr = 1;
-+ intr_mask.b.hcintr = 1;
-+ intr_mask.b.ptxfempty = 1;
-+ intr_mask.b.nptxfempty = 1;
-+
-+ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
-+}
-+
-+/**
-+ * This function initializes the DWC_otg controller registers for
-+ * host mode.
-+ *
-+ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
-+ * request queues. Host channels are reset to ensure that they are ready for
-+ * performing transfers.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ *
-+ */
-+void dwc_otg_core_host_init(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ dwc_otg_host_if_t *host_if = core_if->host_if;
-+ dwc_otg_core_params_t *params = core_if->core_params;
-+ hprt0_data_t hprt0 = { .d32 = 0 };
-+ fifosize_data_t nptxfifosize;
-+ fifosize_data_t ptxfifosize;
-+ int i;
-+ hcchar_data_t hcchar;
-+ hcfg_data_t hcfg;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ int num_channels;
-+ gotgctl_data_t gotgctl = { .d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, core_if);
-+
-+ /* Restart the Phy Clock */
-+ dwc_write_reg32(core_if->pcgcctl, 0);
-+
-+ /* Initialize Host Configuration Register */
-+ init_fslspclksel(core_if);
-+ if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL)
-+ {
-+ hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
-+ hcfg.b.fslssupp = 1;
-+ dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32);
-+ }
-+
-+ /* Configure data FIFO sizes */
-+ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
-+ DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", core_if->total_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size);
-+
-+ /* Rx FIFO */
-+ DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
-+ dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
-+
-+ /* Non-periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
-+ nptxfifosize.b.depth = params->host_nperio_tx_fifo_size;
-+ nptxfifosize.b.startaddr = params->host_rx_fifo_size;
-+ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
-+ DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
-+
-+ /* Periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
-+ ptxfifosize.b.depth = params->host_perio_tx_fifo_size;
-+ ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
-+ dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32);
-+ DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
-+ }
-+
-+ /* Clear Host Set HNP Enable in the OTG Control Register */
-+ gotgctl.b.hstsethnpen = 1;
-+ dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0);
-+
-+ /* Make sure the FIFOs are flushed. */
-+ dwc_otg_flush_tx_fifo(core_if, 0x10 /* all Tx FIFOs */);
-+ dwc_otg_flush_rx_fifo(core_if);
-+
-+ /* Flush out any leftover queued requests. */
-+ num_channels = core_if->core_params->host_channels;
-+ for (i = 0; i < num_channels; i++)
-+ {
-+ hc_regs = core_if->host_if->hc_regs[i];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.chen = 0;
-+ hcchar.b.chdis = 1;
-+ hcchar.b.epdir = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ }
-+
-+ /* Halt all channels to put them into a known state. */
-+ for (i = 0; i < num_channels; i++)
-+ {
-+ int count = 0;
-+ hc_regs = core_if->host_if->hc_regs[i];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 1;
-+ hcchar.b.epdir = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
-+ do {
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (++count > 1000)
-+ {
-+ DWC_ERROR("%s: Unable to clear halt on channel %d\n",
-+ __func__, i);
-+ break;
-+ }
-+ }
-+ while (hcchar.b.chen);
-+ }
-+
-+ /* Turn on the vbus power. */
-+ DWC_PRINT("Init: Port Power? op_state=%d\n", core_if->op_state);
-+ if (core_if->op_state == A_HOST) {
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
-+ if (hprt0.b.prtpwr == 0) {
-+ hprt0.b.prtpwr = 1;
-+ dwc_write_reg32(host_if->hprt0, hprt0.d32);
-+ }
-+ }
-+
-+ dwc_otg_enable_host_interrupts(core_if);
-+}
-+
-+/**
-+ * Prepares a host channel for transferring packets to/from a specific
-+ * endpoint. The HCCHARn register is set up with the characteristics specified
-+ * in _hc. Host channel interrupts that may need to be serviced while this
-+ * transfer is in progress are enabled.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ * @param hc Information needed to initialize the host channel
-+ */
-+void dwc_otg_hc_init(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-+{
-+ uint32_t intr_enable;
-+ hcintmsk_data_t hc_intr_mask;
-+ gintmsk_data_t gintmsk = { .d32 = 0 };
-+ hcchar_data_t hcchar;
-+ hcsplt_data_t hcsplt;
-+
-+ uint8_t hc_num = hc->hc_num;
-+ dwc_otg_host_if_t *host_if = core_if->host_if;
-+ dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
-+
-+ /* Clear old interrupt conditions for this host channel. */
-+ hc_intr_mask.d32 = 0xFFFFFFFF;
-+ hc_intr_mask.b.reserved = 0;
-+ dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32);
-+
-+ /* Enable channel interrupts required for this transfer. */
-+ hc_intr_mask.d32 = 0;
-+ hc_intr_mask.b.chhltd = 1;
-+ if (core_if->dma_enable) {
-+ hc_intr_mask.b.ahberr = 1;
-+ if (hc->error_state && !hc->do_split &&
-+ hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
-+ hc_intr_mask.b.ack = 1;
-+ if (hc->ep_is_in) {
-+ hc_intr_mask.b.datatglerr = 1;
-+ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
-+ hc_intr_mask.b.nak = 1;
-+ }
-+ }
-+ }
-+ }
-+ else {
-+ switch (hc->ep_type) {
-+ case DWC_OTG_EP_TYPE_CONTROL:
-+ case DWC_OTG_EP_TYPE_BULK:
-+ hc_intr_mask.b.xfercompl = 1;
-+ hc_intr_mask.b.stall = 1;
-+ hc_intr_mask.b.xacterr = 1;
-+ hc_intr_mask.b.datatglerr = 1;
-+ if (hc->ep_is_in) {
-+ hc_intr_mask.b.bblerr = 1;
-+ }
-+ else {
-+ hc_intr_mask.b.nak = 1;
-+ hc_intr_mask.b.nyet = 1;
-+ if (hc->do_ping) {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ }
-+
-+ if (hc->do_split) {
-+ hc_intr_mask.b.nak = 1;
-+ if (hc->complete_split) {
-+ hc_intr_mask.b.nyet = 1;
-+ }
-+ else {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ }
-+
-+ if (hc->error_state) {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ break;
-+ case DWC_OTG_EP_TYPE_INTR:
-+ hc_intr_mask.b.xfercompl = 1;
-+ hc_intr_mask.b.nak = 1;
-+ hc_intr_mask.b.stall = 1;
-+ hc_intr_mask.b.xacterr = 1;
-+ hc_intr_mask.b.datatglerr = 1;
-+ hc_intr_mask.b.frmovrun = 1;
-+
-+ if (hc->ep_is_in) {
-+ hc_intr_mask.b.bblerr = 1;
-+ }
-+ if (hc->error_state) {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ if (hc->do_split) {
-+ if (hc->complete_split) {
-+ hc_intr_mask.b.nyet = 1;
-+ }
-+ else {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ }
-+ break;
-+ case DWC_OTG_EP_TYPE_ISOC:
-+ hc_intr_mask.b.xfercompl = 1;
-+ hc_intr_mask.b.frmovrun = 1;
-+ hc_intr_mask.b.ack = 1;
-+
-+ if (hc->ep_is_in) {
-+ hc_intr_mask.b.xacterr = 1;
-+ hc_intr_mask.b.bblerr = 1;
-+ }
-+ break;
-+ }
-+ }
-+ dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32);
-+
-+// if(hc->ep_type == DWC_OTG_EP_TYPE_BULK && !hc->ep_is_in)
-+// hc->max_packet = 512;
-+ /* Enable the top level host channel interrupt. */
-+ intr_enable = (1 << hc_num);
-+ dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
-+
-+ /* Make sure host channel interrupts are enabled. */
-+ gintmsk.b.hcintr = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
-+
-+ /*
-+ * Program the HCCHARn register with the endpoint characteristics for
-+ * the current transfer.
-+ */
-+ hcchar.d32 = 0;
-+ hcchar.b.devaddr = hc->dev_addr;
-+ hcchar.b.epnum = hc->ep_num;
-+ hcchar.b.epdir = hc->ep_is_in;
-+ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
-+ hcchar.b.eptype = hc->ep_type;
-+ hcchar.b.mps = hc->max_packet;
-+
-+ dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n", hcchar.b.devaddr);
-+ DWC_DEBUGPL(DBG_HCDV, " Ep Num: %d\n", hcchar.b.epnum);
-+ DWC_DEBUGPL(DBG_HCDV, " Is In: %d\n", hcchar.b.epdir);
-+ DWC_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev);
-+ DWC_DEBUGPL(DBG_HCDV, " Ep Type: %d\n", hcchar.b.eptype);
-+ DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
-+ DWC_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n", hcchar.b.multicnt);
-+
-+ /*
-+ * Program the HCSPLIT register for SPLITs
-+ */
-+ hcsplt.d32 = 0;
-+ if (hc->do_split) {
-+ DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", hc->hc_num,
-+ hc->complete_split ? "CSPLIT" : "SSPLIT");
-+ hcsplt.b.compsplt = hc->complete_split;
-+ hcsplt.b.xactpos = hc->xact_pos;
-+ hcsplt.b.hubaddr = hc->hub_addr;
-+ hcsplt.b.prtaddr = hc->port_addr;
-+ DWC_DEBUGPL(DBG_HCDV, " comp split %d\n", hc->complete_split);
-+ DWC_DEBUGPL(DBG_HCDV, " xact pos %d\n", hc->xact_pos);
-+ DWC_DEBUGPL(DBG_HCDV, " hub addr %d\n", hc->hub_addr);
-+ DWC_DEBUGPL(DBG_HCDV, " port addr %d\n", hc->port_addr);
-+ DWC_DEBUGPL(DBG_HCDV, " is_in %d\n", hc->ep_is_in);
-+ DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
-+ DWC_DEBUGPL(DBG_HCDV, " xferlen: %d\n", hc->xfer_len);
-+ }
-+ dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
-+
-+}
-+
-+/**
-+ * Attempts to halt a host channel. This function should only be called in
-+ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
-+ * normal circumstances in DMA mode, the controller halts the channel when the
-+ * transfer is complete or a condition occurs that requires application
-+ * intervention.
-+ *
-+ * In slave mode, checks for a free request queue entry, then sets the Channel
-+ * Enable and Channel Disable bits of the Host Channel Characteristics
-+ * register of the specified channel to intiate the halt. If there is no free
-+ * request queue entry, sets only the Channel Disable bit of the HCCHARn
-+ * register to flush requests for this channel. In the latter case, sets a
-+ * flag to indicate that the host channel needs to be halted when a request
-+ * queue slot is open.
-+ *
-+ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
-+ * HCCHARn register. The controller ensures there is space in the request
-+ * queue before submitting the halt request.
-+ *
-+ * Some time may elapse before the core flushes any posted requests for this
-+ * host channel and halts. The Channel Halted interrupt handler completes the
-+ * deactivation of the host channel.
-+ *
-+ * @param core_if Controller register interface.
-+ * @param hc Host channel to halt.
-+ * @param halt_status Reason for halting the channel.
-+ */
-+void dwc_otg_hc_halt(dwc_otg_core_if_t *core_if,
-+ dwc_hc_t *hc,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ gnptxsts_data_t nptxsts;
-+ hptxsts_data_t hptxsts;
-+ hcchar_data_t hcchar;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ dwc_otg_core_global_regs_t *global_regs;
-+ dwc_otg_host_global_regs_t *host_global_regs;
-+
-+ hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+ global_regs = core_if->core_global_regs;
-+ host_global_regs = core_if->host_if->host_global_regs;
-+
-+ WARN_ON(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS);
-+
-+ if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
-+ halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
-+ /*
-+ * Disable all channel interrupts except Ch Halted. The QTD
-+ * and QH state associated with this transfer has been cleared
-+ * (in the case of URB_DEQUEUE), so the channel needs to be
-+ * shut down carefully to prevent crashes.
-+ */
-+ hcintmsk_data_t hcintmsk;
-+ hcintmsk.d32 = 0;
-+ hcintmsk.b.chhltd = 1;
-+ dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32);
-+
-+ /*
-+ * Make sure no other interrupts besides halt are currently
-+ * pending. Handling another interrupt could cause a crash due
-+ * to the QTD and QH state.
-+ */
-+ dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32);
-+
-+ /*
-+ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
-+ * even if the channel was already halted for some other
-+ * reason.
-+ */
-+ hc->halt_status = halt_status;
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen == 0) {
-+ /*
-+ * The channel is either already halted or it hasn't
-+ * started yet. In DMA mode, the transfer may halt if
-+ * it finishes normally or a condition occurs that
-+ * requires driver intervention. Don't want to halt
-+ * the channel again. In either Slave or DMA mode,
-+ * it's possible that the transfer has been assigned
-+ * to a channel, but not started yet when an URB is
-+ * dequeued. Don't want to halt a channel that hasn't
-+ * started yet.
-+ */
-+ return;
-+ }
-+ }
-+
-+ if (hc->halt_pending) {
-+ /*
-+ * A halt has already been issued for this channel. This might
-+ * happen when a transfer is aborted by a higher level in
-+ * the stack.
-+ */
-+#ifdef DEBUG
-+ DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n",
-+ __func__, hc->hc_num);
-+
-+/* dwc_otg_dump_global_registers(core_if); */
-+/* dwc_otg_dump_host_registers(core_if); */
-+#endif
-+ return;
-+ }
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 1;
-+
-+ if (!core_if->dma_enable) {
-+ /* Check for space in the request queue to issue the halt. */
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
-+ nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ if (nptxsts.b.nptxqspcavail == 0) {
-+ hcchar.b.chen = 0;
-+ }
-+ }
-+ else {
-+ hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts);
-+ if ((hptxsts.b.ptxqspcavail == 0) || (core_if->queuing_high_bandwidth)) {
-+ hcchar.b.chen = 0;
-+ }
-+ }
-+ }
-+
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ hc->halt_status = halt_status;
-+
-+ if (hcchar.b.chen) {
-+ hc->halt_pending = 1;
-+ hc->halt_on_queue = 0;
-+ }
-+ else {
-+ hc->halt_on_queue = 1;
-+ }
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32);
-+ DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending);
-+ DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue);
-+ DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status);
-+
-+ return;
-+}
-+
-+/**
-+ * Clears the transfer state for a host channel. This function is normally
-+ * called after a transfer is done and the host channel is being released.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param hc Identifies the host channel to clean up.
-+ */
-+void dwc_otg_hc_cleanup(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-+{
-+ dwc_otg_hc_regs_t *hc_regs;
-+
-+ hc->xfer_started = 0;
-+
-+ /*
-+ * Clear channel interrupt enables and any unhandled channel interrupt
-+ * conditions.
-+ */
-+ hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0);
-+ dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF);
-+
-+#ifdef DEBUG
-+ del_timer(&core_if->hc_xfer_timer[hc->hc_num]);
-+ {
-+ hcchar_data_t hcchar;
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chdis) {
-+ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
-+ __func__, hc->hc_num, hcchar.d32);
-+ }
-+ }
-+#endif
-+}
-+
-+/**
-+ * Sets the channel property that indicates in which frame a periodic transfer
-+ * should occur. This is always set to the _next_ frame. This function has no
-+ * effect on non-periodic transfers.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param hc Identifies the host channel to set up and its properties.
-+ * @param hcchar Current value of the HCCHAR register for the specified host
-+ * channel.
-+ */
-+static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *core_if,
-+ dwc_hc_t *hc,
-+ hcchar_data_t *hcchar)
-+{
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ hfnum_data_t hfnum;
-+ hfnum.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hfnum);
-+
-+ /* 1 if _next_ frame is odd, 0 if it's even */
-+ hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
-+#ifdef DEBUG
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split && !hc->complete_split) {
-+ switch (hfnum.b.frnum & 0x7) {
-+ case 7:
-+ core_if->hfnum_7_samples++;
-+ core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
-+ break;
-+ case 0:
-+ core_if->hfnum_0_samples++;
-+ core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
-+ break;
-+ default:
-+ core_if->hfnum_other_samples++;
-+ core_if->hfnum_other_frrem_accum += hfnum.b.frrem;
-+ break;
-+ }
-+ }
-+#endif
-+ }
-+}
-+
-+#ifdef DEBUG
-+static void hc_xfer_timeout(unsigned long ptr)
-+{
-+ hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)ptr;
-+ int hc_num = xfer_info->hc->hc_num;
-+ DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
-+ DWC_WARN(" start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]);
-+}
-+#endif
-+
-+/*
-+ * This function does the setup for a data transfer for a host channel and
-+ * starts the transfer. May be called in either Slave mode or DMA mode. In
-+ * Slave mode, the caller must ensure that there is sufficient space in the
-+ * request queue and Tx Data FIFO.
-+ *
-+ * For an OUT transfer in Slave mode, it loads a data packet into the
-+ * appropriate FIFO. If necessary, additional data packets will be loaded in
-+ * the Host ISR.
-+ *
-+ * For an IN transfer in Slave mode, a data packet is requested. The data
-+ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
-+ * additional data packets are requested in the Host ISR.
-+ *
-+ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
-+ * register along with a packet count of 1 and the channel is enabled. This
-+ * causes a single PING transaction to occur. Other fields in HCTSIZ are
-+ * simply set to 0 since no data transfer occurs in this case.
-+ *
-+ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
-+ * all the information required to perform the subsequent data transfer. In
-+ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
-+ * controller performs the entire PING protocol, then starts the data
-+ * transfer.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param hc Information needed to initialize the host channel. The xfer_len
-+ * value may be reduced to accommodate the max widths of the XferSize and
-+ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
-+ * to reflect the final xfer_len value.
-+ */
-+void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-+{
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ uint16_t num_packets;
-+ uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size;
-+ uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count;
-+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+
-+ hctsiz.d32 = 0;
-+
-+ if (hc->do_ping) {
-+ if (!core_if->dma_enable) {
-+ dwc_otg_hc_do_ping(core_if, hc);
-+ hc->xfer_started = 1;
-+ return;
-+ }
-+ else {
-+ hctsiz.b.dopng = 1;
-+ }
-+ }
-+
-+ if (hc->do_split) {
-+ num_packets = 1;
-+
-+ if (hc->complete_split && !hc->ep_is_in) {
-+ /* For CSPLIT OUT Transfer, set the size to 0 so the
-+ * core doesn't expect any data written to the FIFO */
-+ hc->xfer_len = 0;
-+ }
-+ else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
-+ hc->xfer_len = hc->max_packet;
-+ }
-+ else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
-+ hc->xfer_len = 188;
-+ }
-+
-+ hctsiz.b.xfersize = hc->xfer_len;
-+ }
-+ else {
-+ /*
-+ * Ensure that the transfer length and packet count will fit
-+ * in the widths allocated for them in the HCTSIZn register.
-+ */
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * Make sure the transfer size is no larger than one
-+ * (micro)frame's worth of data. (A check was done
-+ * when the periodic transfer was accepted to ensure
-+ * that a (micro)frame's worth of data can be
-+ * programmed into a channel.)
-+ */
-+ uint32_t max_periodic_len = hc->multi_count * hc->max_packet;
-+ if (hc->xfer_len > max_periodic_len) {
-+ hc->xfer_len = max_periodic_len;
-+ }
-+ else {
-+ }
-+ }
-+ else if (hc->xfer_len > max_hc_xfer_size) {
-+ /* Make sure that xfer_len is a multiple of max packet size. */
-+ hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1;
-+ }
-+
-+ if (hc->xfer_len > 0) {
-+ num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet;
-+ if (num_packets > max_hc_pkt_count) {
-+ num_packets = max_hc_pkt_count;
-+ hc->xfer_len = num_packets * hc->max_packet;
-+ }
-+ }
-+ else {
-+ /* Need 1 packet for transfer length of 0. */
-+ num_packets = 1;
-+ }
-+
-+#if 0
-+//host testusb item 10, would do series of Control transfer
-+//with URB_SHORT_NOT_OK set in transfer_flags ,
-+//changing the xfer_len would cause the test fail
-+ if (hc->ep_is_in) {
-+ /* Always program an integral # of max packets for IN transfers. */
-+ hc->xfer_len = num_packets * hc->max_packet;
-+ }
-+#endif
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * Make sure that the multi_count field matches the
-+ * actual transfer length.
-+ */
-+ hc->multi_count = num_packets;
-+ }
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /* Set up the initial PID for the transfer. */
-+ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) {
-+ if (hc->ep_is_in) {
-+ if (hc->multi_count == 1) {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-+ }
-+ else if (hc->multi_count == 2) {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
-+ }
-+ else {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
-+ }
-+ }
-+ else {
-+ if (hc->multi_count == 1) {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-+ }
-+ else {
-+ hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
-+ }
-+ }
-+ }
-+ else {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-+ }
-+ }
-+
-+ hctsiz.b.xfersize = hc->xfer_len;
-+ }
-+
-+ hc->start_pkt_count = num_packets;
-+ hctsiz.b.pktcnt = num_packets;
-+ hctsiz.b.pid = hc->data_pid_start;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize);
-+ DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt);
-+ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid);
-+
-+ if (core_if->dma_enable) {
-+ dwc_write_reg32(&hc_regs->hcdma, (uint32_t)hc->xfer_buff);
-+ }
-+
-+ /* Start the split */
-+ if (hc->do_split) {
-+ hcsplt_data_t hcsplt;
-+ hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt);
-+ hcsplt.b.spltena = 1;
-+ dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32);
-+ }
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.multicnt = hc->multi_count;
-+ hc_set_even_odd_frame(core_if, hc, &hcchar);
-+#ifdef DEBUG
-+ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
-+ if (hcchar.b.chdis) {
-+ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
-+ __func__, hc->hc_num, hcchar.d32);
-+ }
-+#endif
-+
-+ /* Set host channel enable after all other setup is complete. */
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ hc->xfer_started = 1;
-+ hc->requests++;
-+
-+ if (!core_if->dma_enable &&
-+ !hc->ep_is_in && hc->xfer_len > 0) {
-+ /* Load OUT packet into the appropriate Tx FIFO. */
-+ dwc_otg_hc_write_packet(core_if, hc);
-+ }
-+
-+#ifdef DEBUG
-+ /* Start a timer for this transfer. */
-+ core_if->hc_xfer_timer[hc->hc_num].function = hc_xfer_timeout;
-+ core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
-+ core_if->hc_xfer_info[hc->hc_num].hc = hc;
-+ core_if->hc_xfer_timer[hc->hc_num].data = (unsigned long)(&core_if->hc_xfer_info[hc->hc_num]);
-+ core_if->hc_xfer_timer[hc->hc_num].expires = jiffies + (HZ*10);
-+ add_timer(&core_if->hc_xfer_timer[hc->hc_num]);
-+#endif
-+}
-+
-+/**
-+ * This function continues a data transfer that was started by previous call
-+ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
-+ * sufficient space in the request queue and Tx Data FIFO. This function
-+ * should only be called in Slave mode. In DMA mode, the controller acts
-+ * autonomously to complete transfers programmed to a host channel.
-+ *
-+ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
-+ * if there is any data remaining to be queued. For an IN transfer, another
-+ * data packet is always requested. For the SETUP phase of a control transfer,
-+ * this function does nothing.
-+ *
-+ * @return 1 if a new request is queued, 0 if no more requests are required
-+ * for this transfer.
-+ */
-+int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-+{
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+
-+ if (hc->do_split) {
-+ /* SPLITs always queue just once per channel */
-+ return 0;
-+ }
-+ else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
-+ /* SETUPs are queued only once since they can't be NAKed. */
-+ return 0;
-+ }
-+ else if (hc->ep_is_in) {
-+ /*
-+ * Always queue another request for other IN transfers. If
-+ * back-to-back INs are issued and NAKs are received for both,
-+ * the driver may still be processing the first NAK when the
-+ * second NAK is received. When the interrupt handler clears
-+ * the NAK interrupt for the first NAK, the second NAK will
-+ * not be seen. So we can't depend on the NAK interrupt
-+ * handler to requeue a NAKed request. Instead, IN requests
-+ * are issued each time this function is called. When the
-+ * transfer completes, the extra requests for the channel will
-+ * be flushed.
-+ */
-+ hcchar_data_t hcchar;
-+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hc_set_even_odd_frame(core_if, hc, &hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+ DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", hcchar.d32);
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ hc->requests++;
-+ return 1;
-+ }
-+ else {
-+ /* OUT transfers. */
-+ if (hc->xfer_count < hc->xfer_len) {
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ hcchar_data_t hcchar;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hc_set_even_odd_frame(core_if, hc, &hcchar);
-+ }
-+
-+ /* Load OUT packet into the appropriate Tx FIFO. */
-+ dwc_otg_hc_write_packet(core_if, hc);
-+ hc->requests++;
-+ return 1;
-+ }
-+ else {
-+ return 0;
-+ }
-+ }
-+}
-+
-+/**
-+ * Starts a PING transfer. This function should only be called in Slave mode.
-+ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
-+ */
-+void dwc_otg_hc_do_ping(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-+{
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+
-+ hctsiz.d32 = 0;
-+ hctsiz.b.dopng = 1;
-+ hctsiz.b.pktcnt = 1;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+}
-+
-+/*
-+ * This function writes a packet into the Tx FIFO associated with the Host
-+ * Channel. For a channel associated with a non-periodic EP, the non-periodic
-+ * Tx FIFO is written. For a channel associated with a periodic EP, the
-+ * periodic Tx FIFO is written. This function should only be called in Slave
-+ * mode.
-+ *
-+ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
-+ * then number of bytes written to the Tx FIFO.
-+ */
-+void dwc_otg_hc_write_packet(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-+{
-+ uint32_t i;
-+ uint32_t remaining_count;
-+ uint32_t byte_count;
-+ uint32_t dword_count;
-+
-+ uint32_t *data_buff = (uint32_t *)(hc->xfer_buff);
-+ uint32_t *data_fifo = core_if->data_fifo[hc->hc_num];
-+
-+ remaining_count = hc->xfer_len - hc->xfer_count;
-+ if (remaining_count > hc->max_packet) {
-+ byte_count = hc->max_packet;
-+ }
-+ else {
-+ byte_count = remaining_count;
-+ }
-+
-+ dword_count = (byte_count + 3) / 4;
-+
-+ if ((((unsigned long)data_buff) & 0x3) == 0) {
-+ /* xfer_buff is DWORD aligned. */
-+ for (i = 0; i < dword_count; i++, data_buff++)
-+ {
-+ dwc_write_reg32(data_fifo, *data_buff);
-+ }
-+ }
-+ else {
-+ /* xfer_buff is not DWORD aligned. */
-+ for (i = 0; i < dword_count; i++, data_buff++)
-+ {
-+ dwc_write_reg32(data_fifo, get_unaligned(data_buff));
-+ }
-+ }
-+
-+ hc->xfer_count += byte_count;
-+ hc->xfer_buff += byte_count;
-+}
-+
-+/**
-+ * Gets the current USB frame number. This is the frame number from the last
-+ * SOF packet.
-+ */
-+uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *core_if)
-+{
-+ dsts_data_t dsts;
-+ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ /* read current frame/microframe number from DSTS register */
-+ return dsts.b.soffn;
-+}
-+
-+/**
-+ * This function reads a setup packet from the Rx FIFO into the destination
-+ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl)
-+ * Interrupt routine when a SETUP packet has been received in Slave mode.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dest Destination buffer for packet data.
-+ */
-+void dwc_otg_read_setup_packet(dwc_otg_core_if_t *core_if, uint32_t *dest)
-+{
-+ /* Get the 8 bytes of a setup transaction data */
-+
-+ /* Pop 2 DWORDS off the receive data FIFO into memory */
-+ dest[0] = dwc_read_reg32(core_if->data_fifo[0]);
-+ dest[1] = dwc_read_reg32(core_if->data_fifo[0]);
-+}
-+
-+
-+/**
-+ * This function enables EP0 OUT to receive SETUP packets and configures EP0
-+ * IN for transmitting packets. It is normally called when the
-+ * "Enumeration Done" interrupt occurs.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP0 data.
-+ */
-+void dwc_otg_ep0_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ dsts_data_t dsts;
-+ depctl_data_t diepctl;
-+ depctl_data_t doepctl;
-+ dctl_data_t dctl = { .d32 = 0 };
-+
-+ /* Read the Device Status and Endpoint 0 Control registers */
-+ dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
-+ diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
-+ doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl);
-+
-+ /* Set the MPS of the IN EP based on the enumeration speed */
-+ switch (dsts.b.enumspd) {
-+ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
-+ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
-+ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
-+ diepctl.b.mps = DWC_DEP0CTL_MPS_64;
-+ break;
-+ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
-+ diepctl.b.mps = DWC_DEP0CTL_MPS_8;
-+ break;
-+ }
-+
-+ dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
-+
-+ /* Enable OUT EP for receive */
-+ doepctl.b.epena = 1;
-+ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
-+
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
-+ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
-+ DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
-+ dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
-+#endif
-+ dctl.b.cgnpinnak = 1;
-+
-+ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
-+ DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n",
-+ dwc_read_reg32(&dev_if->dev_global_regs->dctl));
-+}
-+
-+/**
-+ * This function activates an EP. The Device EP control register for
-+ * the EP is configured as defined in the ep structure. Note: This
-+ * function is not used for EP0.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to activate.
-+ */
-+void dwc_otg_ep_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ depctl_data_t depctl;
-+ volatile uint32_t *addr;
-+ daint_data_t daintmsk = { .d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num,
-+ (ep->is_in?"IN":"OUT"));
-+
-+ /* Read DEPCTLn register */
-+ if (ep->is_in == 1) {
-+ addr = &dev_if->in_ep_regs[ep->num]->diepctl;
-+ daintmsk.ep.in = 1<<ep->num;
-+ }
-+ else {
-+ addr = &dev_if->out_ep_regs[ep->num]->doepctl;
-+ daintmsk.ep.out = 1<<ep->num;
-+ }
-+
-+ /* If the EP is already active don't change the EP Control
-+ * register. */
-+ depctl.d32 = dwc_read_reg32(addr);
-+ if (!depctl.b.usbactep) {
-+ depctl.b.mps = ep->maxpacket;
-+ depctl.b.eptype = ep->type;
-+ depctl.b.txfnum = ep->tx_fifo_num;
-+
-+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ depctl.b.setd0pid = 1; // ???
-+ }
-+ else {
-+ depctl.b.setd0pid = 1;
-+ }
-+ depctl.b.usbactep = 1;
-+
-+ dwc_write_reg32(addr, depctl.d32);
-+ DWC_DEBUGPL(DBG_PCDV,"DEPCTL(%.8x)=%08x\n",(u32)addr, dwc_read_reg32(addr));
-+ }
-+
-+ /* Enable the Interrupt for this EP */
-+ if(core_if->multiproc_int_enable) {
-+ if (ep->is_in == 1) {
-+ diepmsk_data_t diepmsk = { .d32 = 0};
-+ diepmsk.b.xfercompl = 1;
-+ diepmsk.b.timeout = 1;
-+ diepmsk.b.epdisabled = 1;
-+ diepmsk.b.ahberr = 1;
-+ diepmsk.b.intknepmis = 1;
-+ diepmsk.b.txfifoundrn = 1; //?????
-+
-+
-+ if(core_if->dma_desc_enable) {
-+ diepmsk.b.bna = 1;
-+ }
-+/*
-+ if(core_if->dma_enable) {
-+ doepmsk.b.nak = 1;
-+ }
-+*/
-+ dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num], diepmsk.d32);
-+
-+ } else {
-+ doepmsk_data_t doepmsk = { .d32 = 0};
-+ doepmsk.b.xfercompl = 1;
-+ doepmsk.b.ahberr = 1;
-+ doepmsk.b.epdisabled = 1;
-+
-+
-+ if(core_if->dma_desc_enable) {
-+ doepmsk.b.bna = 1;
-+ }
-+/*
-+ doepmsk.b.babble = 1;
-+ doepmsk.b.nyet = 1;
-+ doepmsk.b.nak = 1;
-+*/
-+ dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[ep->num], doepmsk.d32);
-+ }
-+ dwc_modify_reg32(&dev_if->dev_global_regs->deachintmsk,
-+ 0, daintmsk.d32);
-+ } else {
-+ dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk,
-+ 0, daintmsk.d32);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n",
-+ dwc_read_reg32(&dev_if->dev_global_regs->daintmsk));
-+
-+ ep->stall_clear_flag = 0;
-+ return;
-+}
-+
-+/**
-+ * This function deactivates an EP. This is done by clearing the USB Active
-+ * EP bit in the Device EP control register. Note: This function is not used
-+ * for EP0. EP0 cannot be deactivated.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to deactivate.
-+ */
-+void dwc_otg_ep_deactivate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl = { .d32 = 0 };
-+ volatile uint32_t *addr;
-+ daint_data_t daintmsk = { .d32 = 0};
-+
-+ /* Read DEPCTLn register */
-+ if (ep->is_in == 1) {
-+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-+ daintmsk.ep.in = 1<<ep->num;
-+ }
-+ else {
-+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-+ daintmsk.ep.out = 1<<ep->num;
-+ }
-+
-+ //disabled ep only when ep is enabled
-+ //or got halt in the loop in test in cv9
-+ depctl.d32=dwc_read_reg32(addr);
-+ if(depctl.b.epena){
-+ if (ep->is_in == 1) {
-+ diepint_data_t diepint;
-+ dwc_otg_dev_in_ep_regs_t *in_reg=core_if->dev_if->in_ep_regs[ep->num];
-+
-+ //Set ep nak
-+ depctl.d32=dwc_read_reg32(&in_reg->diepctl);
-+ depctl.b.snak=1;
-+ dwc_write_reg32(&in_reg->diepctl,depctl.d32);
-+
-+ //wait for diepint.b.inepnakeff
-+ diepint.d32=dwc_read_reg32(&in_reg->diepint);
-+ while(!diepint.b.inepnakeff){
-+ udelay(1);
-+ diepint.d32=dwc_read_reg32(&in_reg->diepint);
-+ }
-+ diepint.d32=0;
-+ diepint.b.inepnakeff=1;
-+ dwc_write_reg32(&in_reg->diepint,diepint.d32);
-+
-+ //set ep disable and snak
-+ depctl.d32=dwc_read_reg32(&in_reg->diepctl);
-+ depctl.b.snak=1;
-+ depctl.b.epdis=1;
-+ dwc_write_reg32(&in_reg->diepctl,depctl.d32);
-+
-+ //wait for diepint.b.epdisabled
-+ diepint.d32=dwc_read_reg32(&in_reg->diepint);
-+ while(!diepint.b.epdisabled){
-+ udelay(1);
-+ diepint.d32=dwc_read_reg32(&in_reg->diepint);
-+ }
-+ diepint.d32=0;
-+ diepint.b.epdisabled=1;
-+ dwc_write_reg32(&in_reg->diepint,diepint.d32);
-+
-+ //clear ep enable and disable bit
-+ depctl.d32=dwc_read_reg32(&in_reg->diepctl);
-+ depctl.b.epena=0;
-+ depctl.b.epdis=0;
-+ dwc_write_reg32(&in_reg->diepctl,depctl.d32);
-+
-+ }
-+#if 0
-+//following DWC OTG DataBook v2.72a, 6.4.2.1.3 Disabling an OUT Endpoint,
-+//but this doesn't work, the old code do.
-+ else {
-+ doepint_data_t doepint;
-+ dwc_otg_dev_out_ep_regs_t *out_reg=core_if->dev_if->out_ep_regs[ep->num];
-+ dctl_data_t dctl;
-+ gintsts_data_t gintsts;
-+
-+ //set dctl global out nak
-+ dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl);
-+ dctl.b.sgoutnak=1;
-+ dwc_write_reg32(&core_if->dev_if->dev_global_regs->dctl,dctl.d32);
-+
-+ //wait for gintsts.goutnakeff
-+ gintsts.d32=dwc_read_reg32(&core_if->core_global_regs->gintsts);
-+ while(!gintsts.b.goutnakeff){
-+ udelay(1);
-+ gintsts.d32=dwc_read_reg32(&core_if->core_global_regs->gintsts);
-+ }
-+ gintsts.d32=0;
-+ gintsts.b.goutnakeff=1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ //set ep disable and snak
-+ depctl.d32=dwc_read_reg32(&out_reg->doepctl);
-+ depctl.b.snak=1;
-+ depctl.b.epdis=1;
-+ dwc_write_reg32(&out_reg->doepctl,depctl.d32);
-+
-+ //wait for diepint.b.epdisabled
-+ doepint.d32=dwc_read_reg32(&out_reg->doepint);
-+ while(!doepint.b.epdisabled){
-+ udelay(1);
-+ doepint.d32=dwc_read_reg32(&out_reg->doepint);
-+ }
-+ doepint.d32=0;
-+ doepint.b.epdisabled=1;
-+ dwc_write_reg32(&out_reg->doepint,doepint.d32);
-+
-+ //clear ep enable and disable bit
-+ depctl.d32=dwc_read_reg32(&out_reg->doepctl);
-+ depctl.b.epena=0;
-+ depctl.b.epdis=0;
-+ dwc_write_reg32(&out_reg->doepctl,depctl.d32);
-+ }
-+#endif
-+
-+ depctl.d32=0;
-+ depctl.b.usbactep = 0;
-+
-+ if (ep->is_in == 0) {
-+ if(core_if->dma_enable||core_if->dma_desc_enable)
-+ depctl.b.epdis = 1;
-+ }
-+
-+ dwc_write_reg32(addr, depctl.d32);
-+ }
-+
-+ /* Disable the Interrupt for this EP */
-+ if(core_if->multiproc_int_enable) {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->deachintmsk,
-+ daintmsk.d32, 0);
-+
-+ if (ep->is_in == 1) {
-+ dwc_write_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[ep->num], 0);
-+ } else {
-+ dwc_write_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[ep->num], 0);
-+ }
-+ } else {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->daintmsk,
-+ daintmsk.d32, 0);
-+ }
-+
-+ if (ep->is_in == 1) {
-+ DWC_DEBUGPL(DBG_PCD, "DIEPCTL(%.8x)=%08x DIEPTSIZ=%08x, DIEPINT=%.8x, DIEPDMA=%.8x, DTXFSTS=%.8x\n",
-+ (u32)&core_if->dev_if->in_ep_regs[ep->num]->diepctl,
-+ dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->diepctl),
-+ dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz),
-+ dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->diepint),
-+ dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->diepdma),
-+ dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts));
-+ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
-+ dwc_read_reg32(&core_if->core_global_regs->gintmsk));
-+ }
-+ else {
-+ DWC_DEBUGPL(DBG_PCD, "DOEPCTL(%.8x)=%08x DOEPTSIZ=%08x, DOEPINT=%.8x, DOEPDMA=%.8x\n",
-+ (u32)&core_if->dev_if->out_ep_regs[ep->num]->doepctl,
-+ dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doepctl),
-+ dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz),
-+ dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doepint),
-+ dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doepdma));
-+
-+ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
-+ dwc_read_reg32(&core_if->core_global_regs->gintmsk));
-+ }
-+
-+}
-+
-+/**
-+ * This function does the setup for a data transfer for an EP and
-+ * starts the transfer. For an IN transfer, the packets will be
-+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
-+ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ */
-+static void init_dma_desc_chain(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ dwc_otg_dma_desc_t* dma_desc;
-+ uint32_t offset;
-+ uint32_t xfer_est;
-+ int i;
-+
-+ ep->desc_cnt = ( ep->total_len / ep->maxxfer) +
-+ ((ep->total_len % ep->maxxfer) ? 1 : 0);
-+ if(!ep->desc_cnt)
-+ ep->desc_cnt = 1;
-+
-+ dma_desc = ep->desc_addr;
-+ xfer_est = ep->total_len;
-+ offset = 0;
-+ for( i = 0; i < ep->desc_cnt; ++i) {
-+ /** DMA Descriptor Setup */
-+ if(xfer_est > ep->maxxfer) {
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 0;
-+ dma_desc->status.b.ioc = 0;
-+ dma_desc->status.b.sp = 0;
-+ dma_desc->status.b.bytes = ep->maxxfer;
-+ dma_desc->buf = ep->dma_addr + offset;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ xfer_est -= ep->maxxfer;
-+ offset += ep->maxxfer;
-+ } else {
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ if(ep->is_in) {
-+ dma_desc->status.b.sp = (xfer_est % ep->maxpacket) ?
-+ 1 : ((ep->sent_zlp) ? 1 : 0);
-+ dma_desc->status.b.bytes = xfer_est;
-+ } else {
-+ dma_desc->status.b.bytes = xfer_est + ((4 - (xfer_est & 0x3)) & 0x3) ;
-+ }
-+
-+ dma_desc->buf = ep->dma_addr + offset;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+ }
-+ dma_desc ++;
-+ }
-+}
-+
-+/**
-+ * This function does the setup for a data transfer for an EP and
-+ * starts the transfer. For an IN transfer, the packets will be
-+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
-+ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ */
-+
-+void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl;
-+ deptsiz_data_t deptsiz;
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
-+
-+ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
-+ "xfer_buff=%p start_xfer_buff=%p\n",
-+ ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
-+ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
-+
-+ /* IN endpoint */
-+ if (ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[ep->num];
-+
-+ gnptxsts_data_t gtxstatus;
-+
-+ gtxstatus.d32 =
-+ dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
-+
-+ if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
-+#ifdef DEBUG
-+ DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32);
-+#endif
-+ return;
-+ }
-+
-+ depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
-+ deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
-+
-+ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
-+ ep->maxxfer : (ep->total_len - ep->xfer_len);
-+
-+ /* Zero Length Packet? */
-+ if ((ep->xfer_len - ep->xfer_count) == 0) {
-+ deptsiz.b.xfersize = 0;
-+ deptsiz.b.pktcnt = 1;
-+ }
-+ else {
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len - ep->xfer_count - 1 + ep->maxpacket) /
-+ ep->maxpacket;
-+ }
-+
-+
-+ /* Write the DMA register */
-+ if (core_if->dma_enable) {
-+ if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
-+ ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
-+ }
-+ DWC_DEBUGPL(DBG_PCDV, "ep%d dma_addr=%.8x\n", ep->num, ep->dma_addr);
-+
-+ if (core_if->dma_desc_enable == 0) {
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+
-+ VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-+ dwc_write_reg32 (&(in_regs->diepdma),
-+ (uint32_t)ep->dma_addr);
-+ }
-+ else {
-+ init_dma_desc_chain(core_if, ep);
-+ /** DIEPDMAn Register write */
-+
-+ VERIFY_PCD_DMA_ADDR(ep->dma_desc_addr);
-+ dwc_write_reg32(&in_regs->diepdma, ep->dma_desc_addr);
-+ }
-+ }
-+ else
-+ {
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+ if(ep->type != DWC_OTG_EP_TYPE_ISOC) {
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt,
-+ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
-+ * the data will be written into the fifo by the ISR.
-+ */
-+ if(core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+ }
-+ else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if(ep->xfer_len > 0) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk = 1 << ep->num;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ 0, fifoemptymsk);
-+
-+ }
-+ }
-+ }
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-+
-+ depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
-+ depctl.b.nextep = ep->num;
-+ dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
-+
-+ DWC_DEBUGPL(DBG_PCD, "DIEPCTL(%.8x)=%08x DIEPTSIZ=%08x, DIEPINT=%.8x, DIEPDMA=%.8x, DTXFSTS=%.8x\n",
-+ (u32)&in_regs->diepctl,
-+ dwc_read_reg32(&in_regs->diepctl),
-+ dwc_read_reg32(&in_regs->dieptsiz),
-+ dwc_read_reg32(&in_regs->diepint),
-+ dwc_read_reg32(&in_regs->diepdma),
-+ dwc_read_reg32(&in_regs->dtxfsts));
-+ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
-+ dwc_read_reg32(&core_if->core_global_regs->gintmsk));
-+
-+ }
-+ else {
-+ /* OUT endpoint */
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[ep->num];
-+
-+ depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
-+ deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
-+
-+ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
-+ ep->maxxfer : (ep->total_len - ep->xfer_len);
-+
-+ /* Program the transfer size and packet count as follows:
-+ *
-+ * pktcnt = N
-+ * xfersize = N * maxpacket
-+ */
-+ if ((ep->xfer_len - ep->xfer_count) == 0) {
-+ /* Zero Length Packet */
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ deptsiz.b.pktcnt = 1;
-+ }
-+ else {
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len - ep->xfer_count + (ep->maxpacket - 1)) /
-+ ep->maxpacket;
-+ ep->xfer_len = deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count;
-+ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
-+ ep->num,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+
-+ if (core_if->dma_enable) {
-+ if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
-+ ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
-+ }
-+ DWC_DEBUGPL(DBG_PCDV, "ep%d dma_addr=%.8x\n",
-+ ep->num,
-+ ep->dma_addr);
-+ if (!core_if->dma_desc_enable) {
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+
-+ VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-+ dwc_write_reg32 (&(out_regs->doepdma),
-+ (uint32_t)ep->dma_addr);
-+ }
-+ else {
-+ init_dma_desc_chain(core_if, ep);
-+
-+ /** DOEPDMAn Register write */
-+
-+ VERIFY_PCD_DMA_ADDR(ep->dma_desc_addr);
-+ dwc_write_reg32(&out_regs->doepdma, ep->dma_desc_addr);
-+ }
-+ }
-+ else {
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+ }
-+
-+ /* EP enable */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+
-+ dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-+
-+ DWC_DEBUGPL(DBG_PCD, "DOEPCTL(%.8x)=%08x DOEPTSIZ=%08x, DOEPINT=%.8x, DOEPDMA=%.8x\n",
-+ (u32)&out_regs->doepctl,
-+ dwc_read_reg32(&out_regs->doepctl),
-+ dwc_read_reg32(&out_regs->doeptsiz),
-+ dwc_read_reg32(&out_regs->doepint),
-+ dwc_read_reg32(&out_regs->doepdma));
-+
-+ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
-+ dwc_read_reg32(&core_if->core_global_regs->gintmsk));
-+ }
-+}
-+
-+/**
-+ * This function setup a zero length transfer in Buffer DMA and
-+ * Slave modes for usb requests with zero field set
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+
-+ depctl_data_t depctl;
-+ deptsiz_data_t deptsiz;
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
-+
-+ /* IN endpoint */
-+ if (ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[ep->num];
-+
-+ depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
-+ deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
-+
-+ deptsiz.b.xfersize = 0;
-+ deptsiz.b.pktcnt = 1;
-+
-+
-+ /* Write the DMA register */
-+ if (core_if->dma_enable) {
-+ if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
-+ ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
-+ }
-+ if (core_if->dma_desc_enable == 0) {
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+
-+ VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-+ dwc_write_reg32 (&(in_regs->diepdma),
-+ (uint32_t)ep->dma_addr);
-+ }
-+ }
-+ else {
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt,
-+ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
-+ * the data will be written into the fifo by the ISR.
-+ */
-+ if(core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+ }
-+ else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if(ep->xfer_len > 0) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk = 1 << ep->num;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ 0, fifoemptymsk);
-+ }
-+ }
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-+
-+ depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
-+ depctl.b.nextep = ep->num;
-+ dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
-+
-+ }
-+ else {
-+ /* OUT endpoint */
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[ep->num];
-+
-+ depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
-+ deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
-+
-+ /* Zero Length Packet */
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ deptsiz.b.pktcnt = 1;
-+
-+ if (core_if->dma_enable) {
-+ if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
-+ ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
-+ }
-+ if (!core_if->dma_desc_enable) {
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+
-+
-+ VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-+ dwc_write_reg32 (&(out_regs->doepdma),
-+ (uint32_t)ep->dma_addr);
-+ }
-+ }
-+ else {
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+ }
-+
-+ /* EP enable */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+
-+ dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-+
-+ }
-+}
-+
-+/**
-+ * This function does the setup for a data transfer for EP0 and starts
-+ * the transfer. For an IN transfer, the packets will be loaded into
-+ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
-+ * unloaded from the Rx FIFO in the ISR.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP0 data.
-+ */
-+void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl;
-+ deptsiz0_data_t deptsiz;
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ dwc_otg_dma_desc_t* dma_desc;
-+
-+ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
-+ "xfer_buff=%p start_xfer_buff=%p, dma_addr=%.8x\n",
-+ ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
-+ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff,ep->dma_addr);
-+
-+ ep->total_len = ep->xfer_len;
-+
-+ /* IN endpoint */
-+ if (ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[0];
-+
-+ gnptxsts_data_t gtxstatus;
-+
-+ gtxstatus.d32 =
-+ dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
-+
-+ if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
-+#ifdef DEBUG
-+ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-+ DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n",
-+ dwc_read_reg32(&in_regs->diepctl));
-+ DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
-+ deptsiz.d32,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+ DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n",
-+ gtxstatus.d32);
-+#endif
-+ return;
-+ }
-+
-+
-+ depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
-+ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-+
-+ /* Zero Length Packet? */
-+ if (ep->xfer_len == 0) {
-+ deptsiz.b.xfersize = 0;
-+ deptsiz.b.pktcnt = 1;
-+ }
-+ else {
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ if (ep->xfer_len > ep->maxpacket) {
-+ ep->xfer_len = ep->maxpacket;
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ }
-+ else {
-+ deptsiz.b.xfersize = ep->xfer_len;
-+ }
-+ deptsiz.b.pktcnt = 1;
-+
-+ }
-+ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
-+ ep->xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
-+ /* Write the DMA register */
-+ if (core_if->dma_enable) {
-+ if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
-+ ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
-+ }
-+ if(core_if->dma_desc_enable == 0) {
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+
-+ VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-+ dwc_write_reg32 (&(in_regs->diepdma),
-+ (uint32_t)ep->dma_addr);
-+ }
-+ else {
-+ dma_desc = core_if->dev_if->in_desc_addr;
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
-+ dma_desc->status.b.bytes = ep->xfer_len;
-+ dma_desc->buf = ep->dma_addr;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ /** DIEPDMA0 Register write */
-+
-+ VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_in_desc_addr);
-+ dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
-+ }
-+ }
-+ else {
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-+
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt, the
-+ * data will be written into the fifo by the ISR.
-+ */
-+ if (!core_if->dma_enable) {
-+ if(core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+ }
-+ else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if(ep->xfer_len > 0) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk |= 1 << ep->num;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ 0, fifoemptymsk);
-+ }
-+ }
-+ }
-+ }
-+ else {
-+ /* OUT endpoint */
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[0];
-+
-+ depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
-+ deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
-+
-+ /* Program the transfer size and packet count as follows:
-+ * xfersize = N * (maxpacket + 4 - (maxpacket % 4))
-+ * pktcnt = N */
-+ /* Zero Length Packet */
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ deptsiz.b.pktcnt = 1;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n",
-+ ep->xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+
-+ if (core_if->dma_enable) {
-+ if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
-+ ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
-+ }
-+ if(!core_if->dma_desc_enable) {
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+
-+
-+ VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-+ dwc_write_reg32 (&(out_regs->doepdma),
-+ (uint32_t)ep->dma_addr);
-+ }
-+ else {
-+ dma_desc = core_if->dev_if->out_desc_addr;
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.bytes = ep->maxpacket;
-+ dma_desc->buf = ep->dma_addr;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ /** DOEPDMA0 Register write */
-+ VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_out_desc_addr);
-+ dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
-+ }
-+ }
-+ else {
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+ }
-+
-+ /* EP enable */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32 (&(out_regs->doepctl), depctl.d32);
-+ }
-+}
-+
-+/**
-+ * This function continues control IN transfers started by
-+ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
-+ * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
-+ * bit for the packet count.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP0 data.
-+ */
-+void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl;
-+ deptsiz0_data_t deptsiz;
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ dwc_otg_dma_desc_t* dma_desc;
-+
-+ if (ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[0];
-+ gnptxsts_data_t tx_status = { .d32 = 0 };
-+
-+ tx_status.d32 = dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
-+ /** @todo Should there be check for room in the Tx
-+ * Status Queue. If not remove the code above this comment. */
-+
-+ depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
-+ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-+
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+
-+
-+ if(core_if->dma_desc_enable == 0) {
-+ deptsiz.b.xfersize = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
-+ (ep->total_len - ep->xfer_count);
-+ deptsiz.b.pktcnt = 1;
-+ if(core_if->dma_enable == 0) {
-+ ep->xfer_len += deptsiz.b.xfersize;
-+ } else {
-+ ep->xfer_len = deptsiz.b.xfersize;
-+ }
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+ }
-+ else {
-+ ep->xfer_len = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
-+ (ep->total_len - ep->xfer_count);
-+
-+ dma_desc = core_if->dev_if->in_desc_addr;
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
-+ dma_desc->status.b.bytes = ep->xfer_len;
-+ dma_desc->buf = ep->dma_addr;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+
-+ /** DIEPDMA0 Register write */
-+ VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_in_desc_addr);
-+ dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
-+ }
-+
-+
-+ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
-+ ep->xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
-+ if(core_if->dma_desc_enable == 0){
-+
-+ VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-+ dwc_write_reg32 (&(in_regs->diepdma), (uint32_t)ep->dma_addr);
-+ }
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-+
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt, the
-+ * data will be written into the fifo by the ISR.
-+ */
-+ if (!core_if->dma_enable) {
-+ if(core_if->en_multiple_tx_fifo == 0) {
-+ /* First clear it from GINTSTS */
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+
-+ }
-+ else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if(ep->xfer_len > 0) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk |= 1 << ep->num;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ 0, fifoemptymsk);
-+ }
-+ }
-+ }
-+ }
-+ else {
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[0];
-+
-+
-+ depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
-+ deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
-+
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ deptsiz.b.pktcnt = 1;
-+
-+
-+ if(core_if->dma_desc_enable == 0) {
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+ }
-+ else {
-+ dma_desc = core_if->dev_if->out_desc_addr;
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.bytes = ep->maxpacket;
-+ dma_desc->buf = ep->dma_addr;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ /** DOEPDMA0 Register write */
-+ VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_out_desc_addr);
-+ dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
-+ }
-+
-+
-+ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
-+ ep->xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
-+ if(core_if->dma_desc_enable == 0){
-+
-+ VERIFY_PCD_DMA_ADDR(ep->dma_addr);
-+ dwc_write_reg32 (&(out_regs->doepdma), (uint32_t)ep->dma_addr);
-+ }
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-+
-+ }
-+}
-+
-+#ifdef DEBUG
-+void dump_msg(const u8 *buf, unsigned int length)
-+{
-+ unsigned int start, num, i;
-+ char line[52], *p;
-+
-+ if (length >= 512)
-+ return;
-+ start = 0;
-+ while (length > 0) {
-+ num = min(length, 16u);
-+ p = line;
-+ for (i = 0; i < num; ++i)
-+ {
-+ if (i == 8)
-+ *p++ = ' ';
-+ sprintf(p, " %02x", buf[i]);
-+ p += 3;
-+ }
-+ *p = 0;
-+ DWC_PRINT("%6x: %s\n", start, line);
-+ buf += num;
-+ start += num;
-+ length -= num;
-+ }
-+}
-+#else
-+static inline void dump_msg(const u8 *buf, unsigned int length)
-+{
-+}
-+#endif
-+
-+/**
-+ * This function writes a packet into the Tx FIFO associated with the
-+ * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For
-+ * periodic EPs the periodic Tx FIFO associated with the EP is written
-+ * with all packets for the next micro-frame.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to write packet for.
-+ * @param dma Indicates if DMA is being used.
-+ */
-+void dwc_otg_ep_write_packet(dwc_otg_core_if_t *core_if, dwc_ep_t *ep, int dma)
-+{
-+ /**
-+ * The buffer is padded to DWORD on a per packet basis in
-+ * slave/dma mode if the MPS is not DWORD aligned. The last
-+ * packet, if short, is also padded to a multiple of DWORD.
-+ *
-+ * ep->xfer_buff always starts DWORD aligned in memory and is a
-+ * multiple of DWORD in length
-+ *
-+ * ep->xfer_len can be any number of bytes
-+ *
-+ * ep->xfer_count is a multiple of ep->maxpacket until the last
-+ * packet
-+ *
-+ * FIFO access is DWORD */
-+
-+ uint32_t i;
-+ uint32_t byte_count;
-+ uint32_t dword_count;
-+ uint32_t *fifo;
-+ uint32_t *data_buff = (uint32_t *)ep->xfer_buff;
-+
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ep);
-+ if (ep->xfer_count >= ep->xfer_len) {
-+ DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num);
-+ return;
-+ }
-+
-+ /* Find the byte length of the packet either short packet or MPS */
-+ if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) {
-+ byte_count = ep->xfer_len - ep->xfer_count;
-+ }
-+ else {
-+ byte_count = ep->maxpacket;
-+ }
-+
-+ /* Find the DWORD length, padded by extra bytes as neccessary if MPS
-+ * is not a multiple of DWORD */
-+ dword_count = (byte_count + 3) / 4;
-+
-+#ifdef VERBOSE
-+ dump_msg(ep->xfer_buff, byte_count);
-+#endif
-+
-+ /**@todo NGS Where are the Periodic Tx FIFO addresses
-+ * intialized? What should this be? */
-+
-+ fifo = core_if->data_fifo[ep->num];
-+
-+
-+ DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", fifo, data_buff, *data_buff, byte_count);
-+
-+ if (!dma) {
-+ for (i=0; i<dword_count; i++, data_buff++) {
-+ dwc_write_reg32(fifo, *data_buff);
-+ }
-+ }
-+
-+ ep->xfer_count += byte_count;
-+ ep->xfer_buff += byte_count;
-+ ep->dma_addr += byte_count;
-+}
-+
-+/**
-+ * Set the EP STALL.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to set the stall on.
-+ */
-+void dwc_otg_ep_set_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl;
-+ volatile uint32_t *depctl_addr;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s ep%d-%s1\n", __func__, ep->num,
-+ (ep->is_in?"IN":"OUT"));
-+
-+ DWC_PRINT("%s ep%d-%s\n", __func__, ep->num,
-+ (ep->is_in?"in":"out"));
-+
-+ if (ep->is_in == 1) {
-+ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
-+ depctl.d32 = dwc_read_reg32(depctl_addr);
-+
-+ /* set the disable and stall bits */
-+#if 0
-+//epdis is set here but not cleared at latter dwc_otg_ep_clear_stall,
-+//which cause the testusb item 13 failed(Host:pc, device: otg device)
-+ if (depctl.b.epena) {
-+ depctl.b.epdis = 1;
-+ }
-+#endif
-+ depctl.b.stall = 1;
-+ dwc_write_reg32(depctl_addr, depctl.d32);
-+ }
-+ else {
-+ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
-+ depctl.d32 = dwc_read_reg32(depctl_addr);
-+
-+ /* set the stall bit */
-+ depctl.b.stall = 1;
-+ dwc_write_reg32(depctl_addr, depctl.d32);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s: DEPCTL(%.8x)=%0x\n",__func__,(u32)depctl_addr,dwc_read_reg32(depctl_addr));
-+
-+ return;
-+}
-+
-+/**
-+ * Clear the EP STALL.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to clear stall from.
-+ */
-+void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl;
-+ volatile uint32_t *depctl_addr;
-+
-+ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
-+ (ep->is_in?"IN":"OUT"));
-+
-+ if (ep->is_in == 1) {
-+ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
-+ }
-+ else {
-+ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
-+ }
-+
-+ depctl.d32 = dwc_read_reg32(depctl_addr);
-+
-+ /* clear the stall bits */
-+ depctl.b.stall = 0;
-+
-+ /*
-+ * USB Spec 9.4.5: For endpoints using data toggle, regardless
-+ * of whether an endpoint has the Halt feature set, a
-+ * ClearFeature(ENDPOINT_HALT) request always results in the
-+ * data toggle being reinitialized to DATA0.
-+ */
-+ if (ep->type == DWC_OTG_EP_TYPE_INTR ||
-+ ep->type == DWC_OTG_EP_TYPE_BULK) {
-+ depctl.b.setd0pid = 1; /* DATA0 */
-+ }
-+
-+ dwc_write_reg32(depctl_addr, depctl.d32);
-+ DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
-+ return;
-+}
-+
-+/**
-+ * This function reads a packet from the Rx FIFO into the destination
-+ * buffer. To read SETUP data use dwc_otg_read_setup_packet.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dest Destination buffer for the packet.
-+ * @param bytes Number of bytes to copy to the destination.
-+ */
-+void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
-+ uint8_t *dest,
-+ uint16_t bytes)
-+{
-+ int i;
-+ int word_count = (bytes + 3) / 4;
-+
-+ volatile uint32_t *fifo = core_if->data_fifo[0];
-+ uint32_t *data_buff = (uint32_t *)dest;
-+
-+ /**
-+ * @todo Account for the case where _dest is not dword aligned. This
-+ * requires reading data from the FIFO into a uint32_t temp buffer,
-+ * then moving it into the data buffer.
-+ */
-+
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
-+ core_if, dest, bytes);
-+
-+ for (i=0; i<word_count; i++, data_buff++)
-+ {
-+ *data_buff = dwc_read_reg32(fifo);
-+ }
-+
-+ return;
-+}
-+
-+
-+
-+/**
-+ * This functions reads the device registers and prints them
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *core_if)
-+{
-+ int i;
-+ volatile uint32_t *addr;
-+
-+ DWC_PRINT("Device Global Registers\n");
-+ addr=&core_if->dev_if->dev_global_regs->dcfg;
-+ DWC_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->dctl;
-+ DWC_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->dsts;
-+ DWC_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->diepmsk;
-+ DWC_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->doepmsk;
-+ DWC_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->daint;
-+ DWC_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->daintmsk;
-+ DWC_PRINT("DAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->dtknqr1;
-+ DWC_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ if (core_if->hwcfg2.b.dev_token_q_depth > 6) {
-+ addr=&core_if->dev_if->dev_global_regs->dtknqr2;
-+ DWC_PRINT("DTKNQR2 @0x%08X : 0x%08X\n",
-+ (uint32_t)addr,dwc_read_reg32(addr));
-+ }
-+
-+ addr=&core_if->dev_if->dev_global_regs->dvbusdis;
-+ DWC_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+ addr=&core_if->dev_if->dev_global_regs->dvbuspulse;
-+ DWC_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n",
-+ (uint32_t)addr,dwc_read_reg32(addr));
-+
-+ if (core_if->hwcfg2.b.dev_token_q_depth > 14) {
-+ addr=&core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
-+ DWC_PRINT("DTKNQR3_DTHRCTL @0x%08X : 0x%08X\n",
-+ (uint32_t)addr, dwc_read_reg32(addr));
-+ }
-+/*
-+ if (core_if->hwcfg2.b.dev_token_q_depth > 22) {
-+ addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
-+ DWC_PRINT("DTKNQR4 @0x%08X : 0x%08X\n",
-+ (uint32_t)addr, dwc_read_reg32(addr));
-+ }
-+*/
-+ addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
-+ DWC_PRINT("FIFOEMPMSK @0x%08X : 0x%08X\n", (uint32_t)addr, dwc_read_reg32(addr));
-+
-+ addr=&core_if->dev_if->dev_global_regs->deachint;
-+ DWC_PRINT("DEACHINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->deachintmsk;
-+ DWC_PRINT("DEACHINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+ for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
-+ addr=&core_if->dev_if->dev_global_regs->diepeachintmsk[i];
-+ DWC_PRINT("DIEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
-+ }
-+
-+
-+ for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
-+ addr=&core_if->dev_if->dev_global_regs->doepeachintmsk[i];
-+ DWC_PRINT("DOEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
-+ }
-+
-+ for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
-+ DWC_PRINT("Device IN EP %d Registers\n", i);
-+ addr=&core_if->dev_if->in_ep_regs[i]->diepctl;
-+ DWC_PRINT("DIEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->in_ep_regs[i]->diepint;
-+ DWC_PRINT("DIEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->in_ep_regs[i]->dieptsiz;
-+ DWC_PRINT("DIETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->in_ep_regs[i]->diepdma;
-+ DWC_PRINT("DIEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->in_ep_regs[i]->dtxfsts;
-+ DWC_PRINT("DTXFSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ //reading depdmab in non desc dma mode would halt the ahb bus...
-+ if(core_if->dma_desc_enable){
-+ addr=&core_if->dev_if->in_ep_regs[i]->diepdmab;
-+ DWC_PRINT("DIEPDMAB @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ }
-+ }
-+
-+
-+ for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
-+ DWC_PRINT("Device OUT EP %d Registers\n", i);
-+ addr=&core_if->dev_if->out_ep_regs[i]->doepctl;
-+ DWC_PRINT("DOEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->out_ep_regs[i]->doepfn;
-+ DWC_PRINT("DOEPFN @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->out_ep_regs[i]->doepint;
-+ DWC_PRINT("DOEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->out_ep_regs[i]->doeptsiz;
-+ DWC_PRINT("DOETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->out_ep_regs[i]->doepdma;
-+ DWC_PRINT("DOEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+ //reading depdmab in non desc dma mode would halt the ahb bus...
-+ if(core_if->dma_desc_enable){
-+ addr=&core_if->dev_if->out_ep_regs[i]->doepdmab;
-+ DWC_PRINT("DOEPDMAB @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ }
-+
-+ }
-+
-+
-+
-+ return;
-+}
-+
-+/**
-+ * This functions reads the SPRAM and prints its content
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_spram(dwc_otg_core_if_t *core_if)
-+{
-+ volatile uint8_t *addr, *start_addr, *end_addr;
-+
-+ DWC_PRINT("SPRAM Data:\n");
-+ start_addr = (void*)core_if->core_global_regs;
-+ DWC_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr);
-+ start_addr += 0x00028000;
-+ end_addr=(void*)core_if->core_global_regs;
-+ end_addr += 0x000280e0;
-+
-+ for(addr = start_addr; addr < end_addr; addr+=16)
-+ {
-+ DWC_PRINT("0x%8X:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", (uint32_t)addr,
-+ addr[0],
-+ addr[1],
-+ addr[2],
-+ addr[3],
-+ addr[4],
-+ addr[5],
-+ addr[6],
-+ addr[7],
-+ addr[8],
-+ addr[9],
-+ addr[10],
-+ addr[11],
-+ addr[12],
-+ addr[13],
-+ addr[14],
-+ addr[15]
-+ );
-+ }
-+
-+ return;
-+}
-+/**
-+ * This function reads the host registers and prints them
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_host_registers(dwc_otg_core_if_t *core_if)
-+{
-+ int i;
-+ volatile uint32_t *addr;
-+
-+ DWC_PRINT("Host Global Registers\n");
-+ addr=&core_if->host_if->host_global_regs->hcfg;
-+ DWC_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->host_global_regs->hfir;
-+ DWC_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->host_global_regs->hfnum;
-+ DWC_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->host_global_regs->hptxsts;
-+ DWC_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->host_global_regs->haint;
-+ DWC_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->host_global_regs->haintmsk;
-+ DWC_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=core_if->host_if->hprt0;
-+ DWC_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+ for (i=0; i<core_if->core_params->host_channels; i++)
-+ {
-+ DWC_PRINT("Host Channel %d Specific Registers\n", i);
-+ addr=&core_if->host_if->hc_regs[i]->hcchar;
-+ DWC_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->hc_regs[i]->hcsplt;
-+ DWC_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->hc_regs[i]->hcint;
-+ DWC_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->hc_regs[i]->hcintmsk;
-+ DWC_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->hc_regs[i]->hctsiz;
-+ DWC_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->hc_regs[i]->hcdma;
-+ DWC_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ }
-+ return;
-+}
-+
-+/**
-+ * This function reads the core global registers and prints them
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_global_registers(dwc_otg_core_if_t *core_if)
-+{
-+ int i,size;
-+ char* str;
-+ volatile uint32_t *addr;
-+
-+ DWC_PRINT("Core Global Registers\n");
-+ addr=&core_if->core_global_regs->gotgctl;
-+ DWC_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gotgint;
-+ DWC_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gahbcfg;
-+ DWC_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gusbcfg;
-+ DWC_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->grstctl;
-+ DWC_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gintsts;
-+ DWC_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gintmsk;
-+ DWC_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->grxstsr;
-+ DWC_PRINT("GRXSTSR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ //addr=&core_if->core_global_regs->grxstsp;
-+ //DWC_PRINT("GRXSTSP @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->grxfsiz;
-+ DWC_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gnptxfsiz;
-+ DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gnptxsts;
-+ DWC_PRINT("GNPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gi2cctl;
-+ DWC_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gpvndctl;
-+ DWC_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->ggpio;
-+ DWC_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->guid;
-+ DWC_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gsnpsid;
-+ DWC_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->ghwcfg1;
-+ DWC_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->ghwcfg2;
-+ DWC_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->ghwcfg3;
-+ DWC_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->ghwcfg4;
-+ DWC_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->hptxfsiz;
-+ DWC_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+ size=(core_if->hwcfg4.b.ded_fifo_en)?
-+ core_if->hwcfg4.b.num_in_eps:core_if->hwcfg4.b.num_dev_perio_in_ep;
-+ str=(core_if->hwcfg4.b.ded_fifo_en)?"DIEPTXF":"DPTXFSIZ";
-+ for (i=0; i<size; i++)
-+ {
-+ addr=&core_if->core_global_regs->dptxfsiz_dieptxf[i];
-+ DWC_PRINT("%s[%d] @0x%08X : 0x%08X\n",str,i,(uint32_t)addr,dwc_read_reg32(addr));
-+ }
-+}
-+
-+/**
-+ * Flush a Tx FIFO.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param num Tx FIFO to flush.
-+ */
-+void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t *core_if,
-+ const int num)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ volatile grstctl_t greset = { .d32 = 0};
-+ int count = 0;
-+
-+ DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", num);
-+
-+ greset.b.txfflsh = 1;
-+ greset.b.txfnum = num;
-+ dwc_write_reg32(&global_regs->grstctl, greset.d32);
-+
-+ do {
-+ greset.d32 = dwc_read_reg32(&global_regs->grstctl);
-+ if (++count > 10000) {
-+ DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
-+ __func__, greset.d32,
-+ dwc_read_reg32(&global_regs->gnptxsts));
-+ break;
-+ }
-+ }
-+ while (greset.b.txfflsh == 1);
-+
-+ /* Wait for 3 PHY Clocks*/
-+ UDELAY(1);
-+}
-+
-+/**
-+ * Flush Rx FIFO.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ volatile grstctl_t greset = { .d32 = 0};
-+ int count = 0;
-+
-+ DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
-+ /*
-+ *
-+ */
-+ greset.b.rxfflsh = 1;
-+ dwc_write_reg32(&global_regs->grstctl, greset.d32);
-+
-+ do {
-+ greset.d32 = dwc_read_reg32(&global_regs->grstctl);
-+ if (++count > 10000) {
-+ DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
-+ greset.d32);
-+ break;
-+ }
-+ }
-+ while (greset.b.rxfflsh == 1);
-+
-+ /* Wait for 3 PHY Clocks*/
-+ UDELAY(1);
-+}
-+
-+/**
-+ * Do core a soft reset of the core. Be careful with this because it
-+ * resets all the internal state machines of the core.
-+ */
-+void dwc_otg_core_reset(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ volatile grstctl_t greset = { .d32 = 0};
-+ int count = 0;
-+
-+ DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
-+ /* Wait for AHB master IDLE state. */
-+ do {
-+ UDELAY(10);
-+ greset.d32 = dwc_read_reg32(&global_regs->grstctl);
-+ if (++count > 100000) {
-+ DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__,
-+ greset.d32);
-+ return;
-+ }
-+ }
-+ while (greset.b.ahbidle == 0);
-+
-+ /* Core Soft Reset */
-+ count = 0;
-+ greset.b.csftrst = 1;
-+ dwc_write_reg32(&global_regs->grstctl, greset.d32);
-+ do {
-+ greset.d32 = dwc_read_reg32(&global_regs->grstctl);
-+ if (++count > 10000) {
-+ DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__,
-+ greset.d32);
-+ break;
-+ }
-+ }
-+ while (greset.b.csftrst == 1);
-+
-+ /* Wait for 3 PHY Clocks*/
-+ MDELAY(100);
-+
-+ DWC_DEBUGPL(DBG_CILV, "GINTSTS=%.8x\n", dwc_read_reg32(&global_regs->gintsts));
-+ DWC_DEBUGPL(DBG_CILV, "GINTSTS=%.8x\n", dwc_read_reg32(&global_regs->gintsts));
-+ DWC_DEBUGPL(DBG_CILV, "GINTSTS=%.8x\n", dwc_read_reg32(&global_regs->gintsts));
-+
-+}
-+
-+
-+
-+/**
-+ * Register HCD callbacks. The callbacks are used to start and stop
-+ * the HCD for interrupt processing.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param cb the HCD callback structure.
-+ * @param p pointer to be passed to callback function (usb_hcd*).
-+ */
-+void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t *core_if,
-+ dwc_otg_cil_callbacks_t *cb,
-+ void *p)
-+{
-+ core_if->hcd_cb = cb;
-+ cb->p = p;
-+}
-+
-+/**
-+ * Register PCD callbacks. The callbacks are used to start and stop
-+ * the PCD for interrupt processing.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param cb the PCD callback structure.
-+ * @param p pointer to be passed to callback function (pcd*).
-+ */
-+void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t *core_if,
-+ dwc_otg_cil_callbacks_t *cb,
-+ void *p)
-+{
-+ core_if->pcd_cb = cb;
-+ cb->p = p;
-+}
-+
-+#ifdef DWC_EN_ISOC
-+
-+/**
-+ * This function writes isoc data per 1 (micro)frame into tx fifo
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+void write_isoc_frame_data(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ dwc_otg_dev_in_ep_regs_t *ep_regs;
-+ dtxfsts_data_t txstatus = {.d32 = 0};
-+ uint32_t len = 0;
-+ uint32_t dwords;
-+
-+ ep->xfer_len = ep->data_per_frame;
-+ ep->xfer_count = 0;
-+
-+ ep_regs = core_if->dev_if->in_ep_regs[ep->num];
-+
-+ len = ep->xfer_len - ep->xfer_count;
-+
-+ if (len > ep->maxpacket) {
-+ len = ep->maxpacket;
-+ }
-+
-+ dwords = (len + 3)/4;
-+
-+ /* While there is space in the queue and space in the FIFO and
-+ * More data to tranfer, Write packets to the Tx FIFO */
-+ txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
-+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",ep->num,txstatus.d32);
-+
-+ while (txstatus.b.txfspcavail > dwords &&
-+ ep->xfer_count < ep->xfer_len &&
-+ ep->xfer_len != 0) {
-+ /* Write the FIFO */
-+ dwc_otg_ep_write_packet(core_if, ep, 0);
-+
-+ len = ep->xfer_len - ep->xfer_count;
-+ if (len > ep->maxpacket) {
-+ len = ep->maxpacket;
-+ }
-+
-+ dwords = (len + 3)/4;
-+ txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
-+ DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32);
-+ }
-+}
-+
-+
-+/**
-+ * This function initializes a descriptor chain for Isochronous transfer
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ deptsiz_data_t deptsiz = { .d32 = 0 };
-+ depctl_data_t depctl = { .d32 = 0 };
-+ dsts_data_t dsts = { .d32 = 0 };
-+ volatile uint32_t *addr;
-+
-+ if(ep->is_in) {
-+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-+ } else {
-+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-+ }
-+
-+ ep->xfer_len = ep->data_per_frame;
-+ ep->xfer_count = 0;
-+ ep->xfer_buff = ep->cur_pkt_addr;
-+ ep->dma_addr = ep->cur_pkt_dma_addr;
-+
-+ if(ep->is_in) {
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ deptsiz.b.xfersize = ep->xfer_len;
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len - 1 + ep->maxpacket) /
-+ ep->maxpacket;
-+ deptsiz.b.mc = deptsiz.b.pktcnt;
-+ dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ if (core_if->dma_enable) {
-+ dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
-+ }
-+ } else {
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len + (ep->maxpacket - 1)) /
-+ ep->maxpacket;
-+ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
-+
-+ dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
-+
-+ if (core_if->dma_enable) {
-+ dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma),
-+ (uint32_t)ep->dma_addr);
-+ }
-+ }
-+
-+
-+ /** Enable endpoint, clear nak */
-+
-+ depctl.d32 = 0;
-+ if(ep->bInterval == 1) {
-+ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-+ ep->next_frame = dsts.b.soffn + ep->bInterval;
-+
-+ if(ep->next_frame & 0x1) {
-+ depctl.b.setd1pid = 1;
-+ } else {
-+ depctl.b.setd0pid = 1;
-+ }
-+ } else {
-+ ep->next_frame += ep->bInterval;
-+
-+ if(ep->next_frame & 0x1) {
-+ depctl.b.setd1pid = 1;
-+ } else {
-+ depctl.b.setd0pid = 1;
-+ }
-+ }
-+ depctl.b.epena = 1;
-+ depctl.b.cnak = 1;
-+
-+ dwc_modify_reg32(addr, 0, depctl.d32);
-+ depctl.d32 = dwc_read_reg32(addr);
-+
-+ if(ep->is_in && core_if->dma_enable == 0) {
-+ write_isoc_frame_data(core_if, ep);
-+ }
-+
-+}
-+
-+#endif //DWC_EN_ISOC
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_cil.h
-@@ -0,0 +1,1119 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $
-+ * $Revision: #91 $
-+ * $Date: 2008/09/19 $
-+ * $Change: 1099526 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#if !defined(__DWC_CIL_H__)
-+#define __DWC_CIL_H__
-+
-+#include <linux/workqueue.h>
-+#include <linux/version.h>
-+#include <asm/param.h>
-+//#include <asm/arch/regs-irq.h>
-+
-+#include "dwc_otg_plat.h"
-+#include "dwc_otg_regs.h"
-+#ifdef DEBUG
-+#include "linux/timer.h"
-+#endif
-+
-+/**
-+ * @file
-+ * This file contains the interface to the Core Interface Layer.
-+ */
-+
-+
-+/** Macros defined for DWC OTG HW Release verison */
-+#define OTG_CORE_REV_2_00 0x4F542000
-+#define OTG_CORE_REV_2_60a 0x4F54260A
-+#define OTG_CORE_REV_2_71a 0x4F54271A
-+#define OTG_CORE_REV_2_72a 0x4F54272A
-+
-+/**
-+*/
-+typedef struct iso_pkt_info
-+{
-+ uint32_t offset;
-+ uint32_t length;
-+ int32_t status;
-+} iso_pkt_info_t;
-+/**
-+ * The <code>dwc_ep</code> structure represents the state of a single
-+ * endpoint when acting in device mode. It contains the data items
-+ * needed for an endpoint to be activated and transfer packets.
-+ */
-+typedef struct dwc_ep
-+{
-+ /** EP number used for register address lookup */
-+ uint8_t num;
-+ /** EP direction 0 = OUT */
-+ unsigned is_in : 1;
-+ /** EP active. */
-+ unsigned active : 1;
-+
-+ /** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO
-+ If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/
-+ unsigned tx_fifo_num : 4;
-+ /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */
-+ unsigned type : 2;
-+#define DWC_OTG_EP_TYPE_CONTROL 0
-+#define DWC_OTG_EP_TYPE_ISOC 1
-+#define DWC_OTG_EP_TYPE_BULK 2
-+#define DWC_OTG_EP_TYPE_INTR 3
-+
-+ /** DATA start PID for INTR and BULK EP */
-+ unsigned data_pid_start : 1;
-+ /** Frame (even/odd) for ISOC EP */
-+ unsigned even_odd_frame : 1;
-+ /** Max Packet bytes */
-+ unsigned maxpacket : 11;
-+
-+ /** Max Transfer size */
-+ unsigned maxxfer : 16;
-+
-+ /** @name Transfer state */
-+ /** @{ */
-+
-+ /**
-+ * Pointer to the beginning of the transfer buffer -- do not modify
-+ * during transfer.
-+ */
-+
-+ uint32_t dma_addr;
-+
-+ uint32_t dma_desc_addr;
-+ dwc_otg_dma_desc_t* desc_addr;
-+
-+
-+ uint8_t *start_xfer_buff;
-+ /** pointer to the transfer buffer */
-+ uint8_t *xfer_buff;
-+ /** Number of bytes to transfer */
-+ unsigned xfer_len : 19;
-+ /** Number of bytes transferred. */
-+ unsigned xfer_count : 19;
-+ /** Sent ZLP */
-+ unsigned sent_zlp : 1;
-+ /** Total len for control transfer */
-+ unsigned total_len : 19;
-+
-+ /** stall clear flag */
-+ unsigned stall_clear_flag : 1;
-+
-+ /** Allocated DMA Desc count */
-+ uint32_t desc_cnt;
-+
-+ uint32_t aligned_dma_addr;
-+ uint32_t aligned_buf_size;
-+ uint8_t *aligned_buf;
-+
-+
-+#ifdef DWC_EN_ISOC
-+ /**
-+ * Variables specific for ISOC EPs
-+ *
-+ */
-+ /** DMA addresses of ISOC buffers */
-+ uint32_t dma_addr0;
-+ uint32_t dma_addr1;
-+
-+ uint32_t iso_dma_desc_addr;
-+ dwc_otg_dma_desc_t* iso_desc_addr;
-+
-+ /** pointer to the transfer buffers */
-+ uint8_t *xfer_buff0;
-+ uint8_t *xfer_buff1;
-+
-+ /** number of ISOC Buffer is processing */
-+ uint32_t proc_buf_num;
-+ /** Interval of ISOC Buffer processing */
-+ uint32_t buf_proc_intrvl;
-+ /** Data size for regular frame */
-+ uint32_t data_per_frame;
-+
-+ /* todo - pattern data support is to be implemented in the future */
-+ /** Data size for pattern frame */
-+ uint32_t data_pattern_frame;
-+ /** Frame number of pattern data */
-+ uint32_t sync_frame;
-+
-+ /** bInterval */
-+ uint32_t bInterval;
-+ /** ISO Packet number per frame */
-+ uint32_t pkt_per_frm;
-+ /** Next frame num for which will be setup DMA Desc */
-+ uint32_t next_frame;
-+ /** Number of packets per buffer processing */
-+ uint32_t pkt_cnt;
-+ /** Info for all isoc packets */
-+ iso_pkt_info_t *pkt_info;
-+ /** current pkt number */
-+ uint32_t cur_pkt;
-+ /** current pkt number */
-+ uint8_t *cur_pkt_addr;
-+ /** current pkt number */
-+ uint32_t cur_pkt_dma_addr;
-+#endif //DWC_EN_ISOC
-+/** @} */
-+} dwc_ep_t;
-+
-+/*
-+ * Reasons for halting a host channel.
-+ */
-+typedef enum dwc_otg_halt_status
-+{
-+ DWC_OTG_HC_XFER_NO_HALT_STATUS,
-+ DWC_OTG_HC_XFER_COMPLETE,
-+ DWC_OTG_HC_XFER_URB_COMPLETE,
-+ DWC_OTG_HC_XFER_ACK,
-+ DWC_OTG_HC_XFER_NAK,
-+ DWC_OTG_HC_XFER_NYET,
-+ DWC_OTG_HC_XFER_STALL,
-+ DWC_OTG_HC_XFER_XACT_ERR,
-+ DWC_OTG_HC_XFER_FRAME_OVERRUN,
-+ DWC_OTG_HC_XFER_BABBLE_ERR,
-+ DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
-+ DWC_OTG_HC_XFER_AHB_ERR,
-+ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
-+ DWC_OTG_HC_XFER_URB_DEQUEUE
-+} dwc_otg_halt_status_e;
-+
-+/**
-+ * Host channel descriptor. This structure represents the state of a single
-+ * host channel when acting in host mode. It contains the data items needed to
-+ * transfer packets to an endpoint via a host channel.
-+ */
-+typedef struct dwc_hc
-+{
-+ /** Host channel number used for register address lookup */
-+ uint8_t hc_num;
-+
-+ /** Device to access */
-+ unsigned dev_addr : 7;
-+
-+ /** EP to access */
-+ unsigned ep_num : 4;
-+
-+ /** EP direction. 0: OUT, 1: IN */
-+ unsigned ep_is_in : 1;
-+
-+ /**
-+ * EP speed.
-+ * One of the following values:
-+ * - DWC_OTG_EP_SPEED_LOW
-+ * - DWC_OTG_EP_SPEED_FULL
-+ * - DWC_OTG_EP_SPEED_HIGH
-+ */
-+ unsigned speed : 2;
-+#define DWC_OTG_EP_SPEED_LOW 0
-+#define DWC_OTG_EP_SPEED_FULL 1
-+#define DWC_OTG_EP_SPEED_HIGH 2
-+
-+ /**
-+ * Endpoint type.
-+ * One of the following values:
-+ * - DWC_OTG_EP_TYPE_CONTROL: 0
-+ * - DWC_OTG_EP_TYPE_ISOC: 1
-+ * - DWC_OTG_EP_TYPE_BULK: 2
-+ * - DWC_OTG_EP_TYPE_INTR: 3
-+ */
-+ unsigned ep_type : 2;
-+
-+ /** Max packet size in bytes */
-+ unsigned max_packet : 11;
-+
-+ /**
-+ * PID for initial transaction.
-+ * 0: DATA0,<br>
-+ * 1: DATA2,<br>
-+ * 2: DATA1,<br>
-+ * 3: MDATA (non-Control EP),
-+ * SETUP (Control EP)
-+ */
-+ unsigned data_pid_start : 2;
-+#define DWC_OTG_HC_PID_DATA0 0
-+#define DWC_OTG_HC_PID_DATA2 1
-+#define DWC_OTG_HC_PID_DATA1 2
-+#define DWC_OTG_HC_PID_MDATA 3
-+#define DWC_OTG_HC_PID_SETUP 3
-+
-+ /** Number of periodic transactions per (micro)frame */
-+ unsigned multi_count: 2;
-+
-+ /** @name Transfer State */
-+ /** @{ */
-+
-+ /** Pointer to the current transfer buffer position. */
-+ uint8_t *xfer_buff;
-+ /** Total number of bytes to transfer. */
-+ uint32_t xfer_len;
-+ /** Number of bytes transferred so far. */
-+ uint32_t xfer_count;
-+ /** Packet count at start of transfer.*/
-+ uint16_t start_pkt_count;
-+
-+ /**
-+ * Flag to indicate whether the transfer has been started. Set to 1 if
-+ * it has been started, 0 otherwise.
-+ */
-+ uint8_t xfer_started;
-+
-+ /**
-+ * Set to 1 to indicate that a PING request should be issued on this
-+ * channel. If 0, process normally.
-+ */
-+ uint8_t do_ping;
-+
-+ /**
-+ * Set to 1 to indicate that the error count for this transaction is
-+ * non-zero. Set to 0 if the error count is 0.
-+ */
-+ uint8_t error_state;
-+
-+ /**
-+ * Set to 1 to indicate that this channel should be halted the next
-+ * time a request is queued for the channel. This is necessary in
-+ * slave mode if no request queue space is available when an attempt
-+ * is made to halt the channel.
-+ */
-+ uint8_t halt_on_queue;
-+
-+ /**
-+ * Set to 1 if the host channel has been halted, but the core is not
-+ * finished flushing queued requests. Otherwise 0.
-+ */
-+ uint8_t halt_pending;
-+
-+ /**
-+ * Reason for halting the host channel.
-+ */
-+ dwc_otg_halt_status_e halt_status;
-+
-+ /*
-+ * Split settings for the host channel
-+ */
-+ uint8_t do_split; /**< Enable split for the channel */
-+ uint8_t complete_split; /**< Enable complete split */
-+ uint8_t hub_addr; /**< Address of high speed hub */
-+
-+ uint8_t port_addr; /**< Port of the low/full speed device */
-+ /** Split transaction position
-+ * One of the following values:
-+ * - DWC_HCSPLIT_XACTPOS_MID
-+ * - DWC_HCSPLIT_XACTPOS_BEGIN
-+ * - DWC_HCSPLIT_XACTPOS_END
-+ * - DWC_HCSPLIT_XACTPOS_ALL */
-+ uint8_t xact_pos;
-+
-+ /** Set when the host channel does a short read. */
-+ uint8_t short_read;
-+
-+ /**
-+ * Number of requests issued for this channel since it was assigned to
-+ * the current transfer (not counting PINGs).
-+ */
-+ uint8_t requests;
-+
-+ /**
-+ * Queue Head for the transfer being processed by this channel.
-+ */
-+ struct dwc_otg_qh *qh;
-+
-+ /** @} */
-+
-+ /** Entry in list of host channels. */
-+ struct list_head hc_list_entry;
-+} dwc_hc_t;
-+
-+/**
-+ * The following parameters may be specified when starting the module. These
-+ * parameters define how the DWC_otg controller should be configured.
-+ * Parameter values are passed to the CIL initialization function
-+ * dwc_otg_cil_init.
-+ */
-+typedef struct dwc_otg_core_params
-+{
-+ int32_t opt;
-+#define dwc_param_opt_default 1
-+
-+ /**
-+ * Specifies the OTG capabilities. The driver will automatically
-+ * detect the value for this parameter if none is specified.
-+ * 0 - HNP and SRP capable (default)
-+ * 1 - SRP Only capable
-+ * 2 - No HNP/SRP capable
-+ */
-+ int32_t otg_cap;
-+#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
-+#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
-+#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
-+//#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
-+#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE
-+
-+ /**
-+ * Specifies whether to use slave or DMA mode for accessing the data
-+ * FIFOs. The driver will automatically detect the value for this
-+ * parameter if none is specified.
-+ * 0 - Slave
-+ * 1 - DMA (default, if available)
-+ */
-+ int32_t dma_enable;
-+#define dwc_param_dma_enable_default 1
-+
-+ /**
-+ * When DMA mode is enabled specifies whether to use address DMA or DMA Descritor mode for accessing the data
-+ * FIFOs in device mode. The driver will automatically detect the value for this
-+ * parameter if none is specified.
-+ * 0 - address DMA
-+ * 1 - DMA Descriptor(default, if available)
-+ */
-+ int32_t dma_desc_enable;
-+#define dwc_param_dma_desc_enable_default 0
-+ /** The DMA Burst size (applicable only for External DMA
-+ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
-+ */
-+ int32_t dma_burst_size; /* Translate this to GAHBCFG values */
-+//#define dwc_param_dma_burst_size_default 32
-+#define dwc_param_dma_burst_size_default 1
-+
-+ /**
-+ * Specifies the maximum speed of operation in host and device mode.
-+ * The actual speed depends on the speed of the attached device and
-+ * the value of phy_type. The actual speed depends on the speed of the
-+ * attached device.
-+ * 0 - High Speed (default)
-+ * 1 - Full Speed
-+ */
-+ int32_t speed;
-+#define dwc_param_speed_default 0
-+#define DWC_SPEED_PARAM_HIGH 0
-+#define DWC_SPEED_PARAM_FULL 1
-+
-+ /** Specifies whether low power mode is supported when attached
-+ * to a Full Speed or Low Speed device in host mode.
-+ * 0 - Don't support low power mode (default)
-+ * 1 - Support low power mode
-+ */
-+ int32_t host_support_fs_ls_low_power;
-+#define dwc_param_host_support_fs_ls_low_power_default 0
-+
-+ /** Specifies the PHY clock rate in low power mode when connected to a
-+ * Low Speed device in host mode. This parameter is applicable only if
-+ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
-+ * then defaults to 6 MHZ otherwise 48 MHZ.
-+ *
-+ * 0 - 48 MHz
-+ * 1 - 6 MHz
-+ */
-+ int32_t host_ls_low_power_phy_clk;
-+#define dwc_param_host_ls_low_power_phy_clk_default 0
-+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
-+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
-+
-+ /**
-+ * 0 - Use cC FIFO size parameters
-+ * 1 - Allow dynamic FIFO sizing (default)
-+ */
-+ int32_t enable_dynamic_fifo;
-+#define dwc_param_enable_dynamic_fifo_default 1
-+
-+ /** Total number of 4-byte words in the data FIFO memory. This
-+ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
-+ * Tx FIFOs.
-+ * 32 to 32768 (default 8192)
-+ * Note: The total FIFO memory depth in the FPGA configuration is 8192.
-+ */
-+ int32_t data_fifo_size;
-+#define dwc_param_data_fifo_size_default 8192
-+
-+ /** Number of 4-byte words in the Rx FIFO in device mode when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1064)
-+ */
-+ int32_t dev_rx_fifo_size;
-+//#define dwc_param_dev_rx_fifo_size_default 1064
-+#define dwc_param_dev_rx_fifo_size_default 0x100
-+
-+ /**
-+ * Specifies whether dedicated transmit FIFOs are
-+ * enabled for non periodic IN endpoints in device mode
-+ * 0 - No
-+ * 1 - Yes
-+ */
-+ int32_t en_multiple_tx_fifo;
-+#define dwc_param_en_multiple_tx_fifo_default 1
-+
-+ /** Number of 4-byte words in each of the Tx FIFOs in device
-+ * mode when dynamic FIFO sizing is enabled.
-+ * 4 to 768 (default 256)
-+ */
-+ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
-+//#define dwc_param_dev_tx_fifo_size_default 256
-+#define dwc_param_dev_tx_fifo_size_default 0x80
-+
-+ /** Number of 4-byte words in the non-periodic Tx FIFO in device mode
-+ * when dynamic FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t dev_nperio_tx_fifo_size;
-+//#define dwc_param_dev_nperio_tx_fifo_size_default 1024
-+#define dwc_param_dev_nperio_tx_fifo_size_default 0x80
-+
-+ /** Number of 4-byte words in each of the periodic Tx FIFOs in device
-+ * mode when dynamic FIFO sizing is enabled.
-+ * 4 to 768 (default 256)
-+ */
-+ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
-+//#define dwc_param_dev_perio_tx_fifo_size_default 256
-+#define dwc_param_dev_perio_tx_fifo_size_default 0x80
-+
-+ /** Number of 4-byte words in the Rx FIFO in host mode when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t host_rx_fifo_size;
-+//#define dwc_param_host_rx_fifo_size_default 1024
-+#define dwc_param_host_rx_fifo_size_default 0x292
-+
-+ /** Number of 4-byte words in the non-periodic Tx FIFO in host mode
-+ * when Dynamic FIFO sizing is enabled in the core.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t host_nperio_tx_fifo_size;
-+//#define dwc_param_host_nperio_tx_fifo_size_default 1024
-+//#define dwc_param_host_nperio_tx_fifo_size_default 0x292
-+#define dwc_param_host_nperio_tx_fifo_size_default 0x80
-+
-+ /** Number of 4-byte words in the host periodic Tx FIFO when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t host_perio_tx_fifo_size;
-+//#define dwc_param_host_perio_tx_fifo_size_default 1024
-+#define dwc_param_host_perio_tx_fifo_size_default 0x292
-+
-+ /** The maximum transfer size supported in bytes.
-+ * 2047 to 65,535 (default 65,535)
-+ */
-+ int32_t max_transfer_size;
-+#define dwc_param_max_transfer_size_default 65535
-+
-+ /** The maximum number of packets in a transfer.
-+ * 15 to 511 (default 511)
-+ */
-+ int32_t max_packet_count;
-+#define dwc_param_max_packet_count_default 511
-+
-+ /** The number of host channel registers to use.
-+ * 1 to 16 (default 12)
-+ * Note: The FPGA configuration supports a maximum of 12 host channels.
-+ */
-+ int32_t host_channels;
-+//#define dwc_param_host_channels_default 12
-+#define dwc_param_host_channels_default 16
-+
-+ /** The number of endpoints in addition to EP0 available for device
-+ * mode operations.
-+ * 1 to 15 (default 6 IN and OUT)
-+ * Note: The FPGA configuration supports a maximum of 6 IN and OUT
-+ * endpoints in addition to EP0.
-+ */
-+ int32_t dev_endpoints;
-+//#define dwc_param_dev_endpoints_default 6
-+#define dwc_param_dev_endpoints_default 8
-+
-+ /**
-+ * Specifies the type of PHY interface to use. By default, the driver
-+ * will automatically detect the phy_type.
-+ *
-+ * 0 - Full Speed PHY
-+ * 1 - UTMI+ (default)
-+ * 2 - ULPI
-+ */
-+ int32_t phy_type;
-+#define DWC_PHY_TYPE_PARAM_FS 0
-+#define DWC_PHY_TYPE_PARAM_UTMI 1
-+#define DWC_PHY_TYPE_PARAM_ULPI 2
-+#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
-+
-+ /**
-+ * Specifies the UTMI+ Data Width. This parameter is
-+ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
-+ * PHY_TYPE, this parameter indicates the data width between
-+ * the MAC and the ULPI Wrapper.) Also, this parameter is
-+ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
-+ * to "8 and 16 bits", meaning that the core has been
-+ * configured to work at either data path width.
-+ *
-+ * 8 or 16 bits (default 16)
-+ */
-+ int32_t phy_utmi_width;
-+#define dwc_param_phy_utmi_width_default 16
-+
-+ /**
-+ * Specifies whether the ULPI operates at double or single
-+ * data rate. This parameter is only applicable if PHY_TYPE is
-+ * ULPI.
-+ *
-+ * 0 - single data rate ULPI interface with 8 bit wide data
-+ * bus (default)
-+ * 1 - double data rate ULPI interface with 4 bit wide data
-+ * bus
-+ */
-+ int32_t phy_ulpi_ddr;
-+#define dwc_param_phy_ulpi_ddr_default 0
-+
-+ /**
-+ * Specifies whether to use the internal or external supply to
-+ * drive the vbus with a ULPI phy.
-+ */
-+ int32_t phy_ulpi_ext_vbus;
-+#define DWC_PHY_ULPI_INTERNAL_VBUS 0
-+#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
-+#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
-+
-+ /**
-+ * Specifies whether to use the I2Cinterface for full speed PHY. This
-+ * parameter is only applicable if PHY_TYPE is FS.
-+ * 0 - No (default)
-+ * 1 - Yes
-+ */
-+ int32_t i2c_enable;
-+#define dwc_param_i2c_enable_default 0
-+
-+ int32_t ulpi_fs_ls;
-+#define dwc_param_ulpi_fs_ls_default 0
-+
-+ int32_t ts_dline;
-+#define dwc_param_ts_dline_default 0
-+
-+ /** Thresholding enable flag-
-+ * bit 0 - enable non-ISO Tx thresholding
-+ * bit 1 - enable ISO Tx thresholding
-+ * bit 2 - enable Rx thresholding
-+ */
-+ uint32_t thr_ctl;
-+#define dwc_param_thr_ctl_default 0
-+
-+ /** Thresholding length for Tx
-+ * FIFOs in 32 bit DWORDs
-+ */
-+ uint32_t tx_thr_length;
-+#define dwc_param_tx_thr_length_default 64
-+
-+ /** Thresholding length for Rx
-+ * FIFOs in 32 bit DWORDs
-+ */
-+ uint32_t rx_thr_length;
-+#define dwc_param_rx_thr_length_default 64
-+
-+ /** Per Transfer Interrupt
-+ * mode enable flag
-+ * 1 - Enabled
-+ * 0 - Disabled
-+ */
-+ uint32_t pti_enable;
-+#define dwc_param_pti_enable_default 0
-+
-+ /** Molti Processor Interrupt
-+ * mode enable flag
-+ * 1 - Enabled
-+ * 0 - Disabled
-+ */
-+ uint32_t mpi_enable;
-+#define dwc_param_mpi_enable_default 0
-+
-+} dwc_otg_core_params_t;
-+
-+#ifdef DEBUG
-+struct dwc_otg_core_if;
-+typedef struct hc_xfer_info
-+{
-+ struct dwc_otg_core_if *core_if;
-+ dwc_hc_t *hc;
-+} hc_xfer_info_t;
-+#endif
-+
-+/**
-+ * The <code>dwc_otg_core_if</code> structure contains information needed to manage
-+ * the DWC_otg controller acting in either host or device mode. It
-+ * represents the programming view of the controller as a whole.
-+ */
-+typedef struct dwc_otg_core_if
-+{
-+ /** Parameters that define how the core should be configured.*/
-+ dwc_otg_core_params_t *core_params;
-+
-+ /** Core Global registers starting at offset 000h. */
-+ dwc_otg_core_global_regs_t *core_global_regs;
-+
-+ /** Device-specific information */
-+ dwc_otg_dev_if_t *dev_if;
-+ /** Host-specific information */
-+ dwc_otg_host_if_t *host_if;
-+
-+ /** Value from SNPSID register */
-+ uint32_t snpsid;
-+
-+ /*
-+ * Set to 1 if the core PHY interface bits in USBCFG have been
-+ * initialized.
-+ */
-+ uint8_t phy_init_done;
-+
-+ /*
-+ * SRP Success flag, set by srp success interrupt in FS I2C mode
-+ */
-+ uint8_t srp_success;
-+ uint8_t srp_timer_started;
-+
-+ /* Common configuration information */
-+ /** Power and Clock Gating Control Register */
-+ volatile uint32_t *pcgcctl;
-+#define DWC_OTG_PCGCCTL_OFFSET 0xE00
-+
-+ /** Push/pop addresses for endpoints or host channels.*/
-+ uint32_t *data_fifo[MAX_EPS_CHANNELS];
-+#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
-+#define DWC_OTG_DATA_FIFO_SIZE 0x1000
-+
-+ /** Total RAM for FIFOs (Bytes) */
-+ uint16_t total_fifo_size;
-+ /** Size of Rx FIFO (Bytes) */
-+ uint16_t rx_fifo_size;
-+ /** Size of Non-periodic Tx FIFO (Bytes) */
-+ uint16_t nperio_tx_fifo_size;
-+
-+
-+ /** 1 if DMA is enabled, 0 otherwise. */
-+ uint8_t dma_enable;
-+
-+ /** 1 if Descriptor DMA mode is enabled, 0 otherwise. */
-+ uint8_t dma_desc_enable;
-+
-+ /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */
-+ uint8_t pti_enh_enable;
-+
-+ /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */
-+ uint8_t multiproc_int_enable;
-+
-+ /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
-+ uint8_t en_multiple_tx_fifo;
-+
-+ /** Set to 1 if multiple packets of a high-bandwidth transfer is in
-+ * process of being queued */
-+ uint8_t queuing_high_bandwidth;
-+
-+ /** Hardware Configuration -- stored here for convenience.*/
-+ hwcfg1_data_t hwcfg1;
-+ hwcfg2_data_t hwcfg2;
-+ hwcfg3_data_t hwcfg3;
-+ hwcfg4_data_t hwcfg4;
-+
-+ /** Host and Device Configuration -- stored here for convenience.*/
-+ hcfg_data_t hcfg;
-+ dcfg_data_t dcfg;
-+
-+ /** The operational State, during transations
-+ * (a_host>>a_peripherial and b_device=>b_host) this may not
-+ * match the core but allows the software to determine
-+ * transitions.
-+ */
-+ uint8_t op_state;
-+
-+ /**
-+ * Set to 1 if the HCD needs to be restarted on a session request
-+ * interrupt. This is required if no connector ID status change has
-+ * occurred since the HCD was last disconnected.
-+ */
-+ uint8_t restart_hcd_on_session_req;
-+
-+ /** HCD callbacks */
-+ /** A-Device is a_host */
-+#define A_HOST (1)
-+ /** A-Device is a_suspend */
-+#define A_SUSPEND (2)
-+ /** A-Device is a_peripherial */
-+#define A_PERIPHERAL (3)
-+ /** B-Device is operating as a Peripheral. */
-+#define B_PERIPHERAL (4)
-+ /** B-Device is operating as a Host. */
-+#define B_HOST (5)
-+
-+ /** HCD callbacks */
-+ struct dwc_otg_cil_callbacks *hcd_cb;
-+ /** PCD callbacks */
-+ struct dwc_otg_cil_callbacks *pcd_cb;
-+
-+ /** Device mode Periodic Tx FIFO Mask */
-+ uint32_t p_tx_msk;
-+ /** Device mode Periodic Tx FIFO Mask */
-+ uint32_t tx_msk;
-+
-+ /** Workqueue object used for handling several interrupts */
-+ struct workqueue_struct *wq_otg;
-+
-+ /** Work object used for handling "Connector ID Status Change" Interrupt */
-+ struct work_struct w_conn_id;
-+
-+ /** Work object used for handling "Wakeup Detected" Interrupt */
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ struct work_struct w_wkp;
-+#else
-+ struct delayed_work w_wkp;
-+#endif
-+
-+#ifdef DEBUG
-+ uint32_t start_hcchar_val[MAX_EPS_CHANNELS];
-+
-+ hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS];
-+ struct timer_list hc_xfer_timer[MAX_EPS_CHANNELS];
-+
-+ uint32_t hfnum_7_samples;
-+ uint64_t hfnum_7_frrem_accum;
-+ uint32_t hfnum_0_samples;
-+ uint64_t hfnum_0_frrem_accum;
-+ uint32_t hfnum_other_samples;
-+ uint64_t hfnum_other_frrem_accum;
-+#endif
-+
-+
-+} dwc_otg_core_if_t;
-+
-+/*We must clear S3C24XX_EINTPEND external interrupt register
-+ * because after clearing in this register trigerred IRQ from
-+ * H/W core in kernel interrupt can be occured again before OTG
-+ * handlers clear all IRQ sources of Core registers because of
-+ * timing latencies and Low Level IRQ Type.
-+ */
-+
-+#ifdef CONFIG_MACH_IPMATE
-+#define S3C2410X_CLEAR_EINTPEND() \
-+do { \
-+ if (!dwc_otg_read_core_intr(core_if)) { \
-+ __raw_writel(1UL << 11,S3C24XX_EINTPEND); \
-+ } \
-+} while (0)
-+#else
-+#define S3C2410X_CLEAR_EINTPEND() do { } while (0)
-+#endif
-+
-+/*
-+ * The following functions are functions for works
-+ * using during handling some interrupts
-+ */
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+
-+extern void w_conn_id_status_change(void *p);
-+extern void w_wakeup_detected(void *p);
-+
-+#else
-+
-+extern void w_conn_id_status_change(struct work_struct *p);
-+extern void w_wakeup_detected(struct work_struct *p);
-+
-+#endif
-+
-+
-+/*
-+ * The following functions support initialization of the CIL driver component
-+ * and the DWC_otg controller.
-+ */
-+extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
-+ dwc_otg_core_params_t *_core_params);
-+extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if );
-+extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if );
-+
-+/** @name Device CIL Functions
-+ * The following functions support managing the DWC_otg controller in device
-+ * mode.
-+ */
-+/**@{*/
-+extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest);
-+extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma);
-+extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_dump_spram(dwc_otg_core_if_t *_core_if);
-+#ifdef DWC_EN_ISOC
-+extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep);
-+extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep);
-+#endif //DWC_EN_ISOC
-+/**@}*/
-+
-+/** @name Host CIL Functions
-+ * The following functions support managing the DWC_otg controller in host
-+ * mode.
-+ */
-+/**@{*/
-+extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
-+ dwc_hc_t *_hc,
-+ dwc_otg_halt_status_e _halt_status);
-+extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if);
-+
-+/**
-+ * This function Reads HPRT0 in preparation to modify. It keeps the
-+ * WC bits 0 so that if they are read as 1, they won't clear when you
-+ * write it back
-+ */
-+static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if)
-+{
-+ hprt0_data_t hprt0;
-+ hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0);
-+ hprt0.b.prtena = 0;
-+ hprt0.b.prtconndet = 0;
-+ hprt0.b.prtenchng = 0;
-+ hprt0.b.prtovrcurrchng = 0;
-+ return hprt0.d32;
-+}
-+
-+extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if);
-+/**@}*/
-+
-+/** @name Common CIL Functions
-+ * The following functions support managing the DWC_otg controller in either
-+ * device or host mode.
-+ */
-+/**@{*/
-+
-+extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
-+ uint8_t *dest,
-+ uint16_t bytes);
-+
-+extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if);
-+
-+extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if,
-+ const int _num );
-+extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if );
-+extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if );
-+
-+extern dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count);
-+extern void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count);
-+
-+/**
-+ * This function returns the Core Interrupt register.
-+ */
-+static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) &
-+ dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
-+}
-+
-+/**
-+ * This function returns the OTG Interrupt register.
-+ */
-+static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint));
-+}
-+
-+/**
-+ * This function reads the Device All Endpoints Interrupt register and
-+ * returns the IN endpoint interrupt bits.
-+ */
-+static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t v;
-+
-+ if(core_if->multiproc_int_enable) {
-+ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) &
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk);
-+ } else {
-+ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) &
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk);
-+ }
-+ return (v & 0xffff);
-+
-+}
-+
-+/**
-+ * This function reads the Device All Endpoints Interrupt register and
-+ * returns the OUT endpoint interrupt bits.
-+ */
-+static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t v;
-+
-+ if(core_if->multiproc_int_enable) {
-+ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) &
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk);
-+ } else {
-+ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) &
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk);
-+ }
-+
-+ return ((v & 0xffff0000) >> 16);
-+}
-+
-+/**
-+ * This function returns the Device IN EP Interrupt register
-+ */
-+static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *core_if,
-+ dwc_ep_t *ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ uint32_t v, msk, emp;
-+
-+ if(core_if->multiproc_int_enable) {
-+ msk = dwc_read_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num]);
-+ emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
-+ msk |= ((emp >> ep->num) & 0x1) << 7;
-+ v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
-+ } else {
-+ msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
-+ emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
-+ msk |= ((emp >> ep->num) & 0x1) << 7;
-+ v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
-+ }
-+
-+
-+ return v;
-+}
-+/**
-+ * This function returns the Device OUT EP Interrupt register
-+ */
-+static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if,
-+ dwc_ep_t *_ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
-+ uint32_t v;
-+ doepmsk_data_t msk = { .d32 = 0 };
-+
-+ if(_core_if->multiproc_int_enable) {
-+ msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepeachintmsk[_ep->num]);
-+ if(_core_if->pti_enh_enable) {
-+ msk.b.pktdrpsts = 1;
-+ }
-+ v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32;
-+ } else {
-+ msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepmsk);
-+ if(_core_if->pti_enh_enable) {
-+ msk.b.pktdrpsts = 1;
-+ }
-+ v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32;
-+ }
-+ return v;
-+}
-+
-+/**
-+ * This function returns the Host All Channel Interrupt register
-+ */
-+static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint));
-+}
-+
-+static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-+{
-+ return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
-+}
-+
-+
-+/**
-+ * This function returns the mode of the operation, host or device.
-+ *
-+ * @return 0 - Device Mode, 1 - Host Mode
-+ */
-+static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1);
-+}
-+
-+static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
-+}
-+static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
-+}
-+
-+extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if );
-+
-+
-+/**@}*/
-+
-+/**
-+ * DWC_otg CIL callback structure. This structure allows the HCD and
-+ * PCD to register functions used for starting and stopping the PCD
-+ * and HCD for role change on for a DRD.
-+ */
-+typedef struct dwc_otg_cil_callbacks
-+{
-+ /** Start function for role change */
-+ int (*start) (void *_p);
-+ /** Stop Function for role change */
-+ int (*stop) (void *_p);
-+ /** Disconnect Function for role change */
-+ int (*disconnect) (void *_p);
-+ /** Resume/Remote wakeup Function */
-+ int (*resume_wakeup) (void *_p);
-+ /** Suspend function */
-+ int (*suspend) (void *_p);
-+ /** Session Start (SRP) */
-+ int (*session_start) (void *_p);
-+ /** Pointer passed to start() and stop() */
-+ void *p;
-+} dwc_otg_cil_callbacks_t;
-+
-+extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
-+ dwc_otg_cil_callbacks_t *_cb,
-+ void *_p);
-+extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
-+ dwc_otg_cil_callbacks_t *_cb,
-+ void *_p);
-+#ifndef warn
-+#define warn printk
-+#endif
-+
-+#endif
-+
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_cil_intr.c
-@@ -0,0 +1,881 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $
-+ * $Revision: #10 $
-+ * $Date: 2008/07/16 $
-+ * $Change: 1065567 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ *
-+ * The Core Interface Layer provides basic services for accessing and
-+ * managing the DWC_otg hardware. These services are used by both the
-+ * Host Controller Driver and the Peripheral Controller Driver.
-+ *
-+ * This file contains the Common Interrupt handlers.
-+ */
-+#include "dwc_otg_plat.h"
-+#include "dwc_otg_regs.h"
-+#include "dwc_otg_cil.h"
-+#include "dwc_otg_pcd.h"
-+
-+#ifdef DEBUG
-+inline const char *op_state_str(dwc_otg_core_if_t *core_if)
-+{
-+ return (core_if->op_state==A_HOST?"a_host":
-+ (core_if->op_state==A_SUSPEND?"a_suspend":
-+ (core_if->op_state==A_PERIPHERAL?"a_peripheral":
-+ (core_if->op_state==B_PERIPHERAL?"b_peripheral":
-+ (core_if->op_state==B_HOST?"b_host":
-+ "unknown")))));
-+}
-+#endif
-+
-+/** This function will log a debug message
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *core_if)
-+{
-+ gintsts_data_t gintsts;
-+ DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
-+ dwc_otg_mode(core_if) ? "Host" : "Device");
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.modemismatch = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+
-+/** Start the HCD. Helper function for using the HCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void hcd_start(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->hcd_cb && core_if->hcd_cb->start) {
-+ core_if->hcd_cb->start(core_if->hcd_cb->p);
-+ }
-+}
-+/** Stop the HCD. Helper function for using the HCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void hcd_stop(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->hcd_cb && core_if->hcd_cb->stop) {
-+ core_if->hcd_cb->stop(core_if->hcd_cb->p);
-+ }
-+}
-+/** Disconnect the HCD. Helper function for using the HCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void hcd_disconnect(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->hcd_cb && core_if->hcd_cb->disconnect) {
-+ core_if->hcd_cb->disconnect(core_if->hcd_cb->p);
-+ }
-+}
-+/** Inform the HCD the a New Session has begun. Helper function for
-+ * using the HCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void hcd_session_start(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->hcd_cb && core_if->hcd_cb->session_start) {
-+ core_if->hcd_cb->session_start(core_if->hcd_cb->p);
-+ }
-+}
-+
-+/** Start the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void pcd_start(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->pcd_cb && core_if->pcd_cb->start) {
-+ core_if->pcd_cb->start(core_if->pcd_cb->p);
-+ }
-+}
-+/** Stop the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void pcd_stop(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->pcd_cb && core_if->pcd_cb->stop) {
-+ core_if->pcd_cb->stop(core_if->pcd_cb->p);
-+ }
-+}
-+/** Suspend the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void pcd_suspend(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->pcd_cb && core_if->pcd_cb->suspend) {
-+ core_if->pcd_cb->suspend(core_if->pcd_cb->p);
-+ }
-+}
-+/** Resume the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void pcd_resume(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
-+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
-+ }
-+}
-+
-+/**
-+ * This function handles the OTG Interrupts. It reads the OTG
-+ * Interrupt Register (GOTGINT) to determine what interrupt has
-+ * occurred.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+ gotgint_data_t gotgint;
-+ gotgctl_data_t gotgctl;
-+ gintmsk_data_t gintmsk;
-+
-+ gotgint.d32 = dwc_read_reg32(&global_regs->gotgint);
-+ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
-+ DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32,
-+ op_state_str(core_if));
-+ //DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32);
-+
-+ if (gotgint.b.sesenddet) {
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "Session End Detected++ (%s)\n",
-+ op_state_str(core_if));
-+ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
-+
-+ if (core_if->op_state == B_HOST) {
-+
-+ dwc_otg_pcd_t *pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-+ if(unlikely(!pcd)) {
-+ DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-+ BUG();
-+ }
-+ SPIN_LOCK(&pcd->lock);
-+
-+ pcd_start(core_if);
-+
-+ SPIN_UNLOCK(&pcd->lock);
-+ core_if->op_state = B_PERIPHERAL;
-+ } else {
-+ dwc_otg_pcd_t *pcd;
-+
-+ /* If not B_HOST and Device HNP still set. HNP
-+ * Did not succeed!*/
-+ if (gotgctl.b.devhnpen) {
-+ DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
-+ DWC_ERROR("Device Not Connected/Responding!\n");
-+ }
-+
-+ /* If Session End Detected the B-Cable has
-+ * been disconnected. */
-+ /* Reset PCD and Gadget driver to a
-+ * clean state. */
-+
-+ pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-+ if(unlikely(!pcd)) {
-+ DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-+ BUG();
-+ }
-+ SPIN_LOCK(&pcd->lock);
-+
-+ pcd_stop(core_if);
-+
-+ SPIN_UNLOCK(&pcd->lock);
-+ }
-+ gotgctl.d32 = 0;
-+ gotgctl.b.devhnpen = 1;
-+ dwc_modify_reg32(&global_regs->gotgctl,
-+ gotgctl.d32, 0);
-+ }
-+ if (gotgint.b.sesreqsucstschng) {
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "Session Reqeust Success Status Change++\n");
-+ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
-+ if (gotgctl.b.sesreqscs) {
-+ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
-+ (core_if->core_params->i2c_enable)) {
-+ core_if->srp_success = 1;
-+ }
-+ else {
-+ dwc_otg_pcd_t *pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-+ if(unlikely(!pcd)) {
-+ DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-+ BUG();
-+ }
-+ SPIN_LOCK(&pcd->lock);
-+
-+ pcd_resume(core_if);
-+
-+ SPIN_UNLOCK(&pcd->lock);
-+ /* Clear Session Request */
-+ gotgctl.d32 = 0;
-+ gotgctl.b.sesreq = 1;
-+ dwc_modify_reg32(&global_regs->gotgctl,
-+ gotgctl.d32, 0);
-+ }
-+ }
-+ }
-+ if (gotgint.b.hstnegsucstschng) {
-+ /* Print statements during the HNP interrupt handling
-+ * can cause it to fail.*/
-+ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
-+ if (gotgctl.b.hstnegscs) {
-+ if (dwc_otg_is_host_mode(core_if)) {
-+ dwc_otg_pcd_t *pcd;
-+
-+ core_if->op_state = B_HOST;
-+ /*
-+ * Need to disable SOF interrupt immediately.
-+ * When switching from device to host, the PCD
-+ * interrupt handler won't handle the
-+ * interrupt if host mode is already set. The
-+ * HCD interrupt handler won't get called if
-+ * the HCD state is HALT. This means that the
-+ * interrupt does not get handled and Linux
-+ * complains loudly.
-+ */
-+ gintmsk.d32 = 0;
-+ gintmsk.b.sofintr = 1;
-+ dwc_modify_reg32(&global_regs->gintmsk,
-+ gintmsk.d32, 0);
-+
-+ pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-+ if(unlikely(!pcd)) {
-+ DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-+ BUG();
-+ }
-+ SPIN_LOCK(&pcd->lock);
-+
-+ pcd_stop(core_if);
-+
-+ SPIN_UNLOCK(&pcd->lock);
-+ /*
-+ * Initialize the Core for Host mode.
-+ */
-+ hcd_start(core_if);
-+ core_if->op_state = B_HOST;
-+ }
-+ } else {
-+ gotgctl.d32 = 0;
-+ gotgctl.b.hnpreq = 1;
-+ gotgctl.b.devhnpen = 1;
-+ dwc_modify_reg32(&global_regs->gotgctl,
-+ gotgctl.d32, 0);
-+ DWC_DEBUGPL(DBG_ANY, "HNP Failed\n");
-+ DWC_ERROR("Device Not Connected/Responding\n");
-+ }
-+ }
-+ if (gotgint.b.hstnegdet) {
-+ /* The disconnect interrupt is set at the same time as
-+ * Host Negotiation Detected. During the mode
-+ * switch all interrupts are cleared so the disconnect
-+ * interrupt handler will not get executed.
-+ */
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "Host Negotiation Detected++ (%s)\n",
-+ (dwc_otg_is_host_mode(core_if)?"Host":"Device"));
-+ if (dwc_otg_is_device_mode(core_if)){
-+ dwc_otg_pcd_t *pcd;
-+
-+ DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", core_if->op_state);
-+ hcd_disconnect(core_if);
-+
-+ pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-+ if(unlikely(!pcd)) {
-+ DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-+ BUG();
-+ }
-+ SPIN_LOCK(&pcd->lock);
-+
-+ pcd_start(core_if);
-+
-+ SPIN_UNLOCK(&pcd->lock);
-+ core_if->op_state = A_PERIPHERAL;
-+ } else {
-+ dwc_otg_pcd_t *pcd;
-+
-+ /*
-+ * Need to disable SOF interrupt immediately. When
-+ * switching from device to host, the PCD interrupt
-+ * handler won't handle the interrupt if host mode is
-+ * already set. The HCD interrupt handler won't get
-+ * called if the HCD state is HALT. This means that
-+ * the interrupt does not get handled and Linux
-+ * complains loudly.
-+ */
-+ gintmsk.d32 = 0;
-+ gintmsk.b.sofintr = 1;
-+ dwc_modify_reg32(&global_regs->gintmsk,
-+ gintmsk.d32, 0);
-+
-+ pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-+ if(unlikely(!pcd)) {
-+ DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-+ BUG();
-+ }
-+ SPIN_LOCK(&pcd->lock);
-+
-+ pcd_stop(core_if);
-+
-+ SPIN_UNLOCK(&pcd->lock);
-+ hcd_start(core_if);
-+ core_if->op_state = A_HOST;
-+ }
-+ }
-+ if (gotgint.b.adevtoutchng) {
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "A-Device Timeout Change++\n");
-+ }
-+ if (gotgint.b.debdone) {
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "Debounce Done++\n");
-+ }
-+
-+ /* Clear GOTGINT */
-+ dwc_write_reg32 (&core_if->core_global_regs->gotgint, gotgint.d32);
-+
-+ return 1;
-+}
-+
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+
-+void w_conn_id_status_change(void *p)
-+{
-+ dwc_otg_core_if_t *core_if = p;
-+
-+#else
-+
-+void w_conn_id_status_change(struct work_struct *p)
-+{
-+ dwc_otg_core_if_t *core_if = container_of(p, dwc_otg_core_if_t, w_conn_id);
-+
-+#endif
-+
-+
-+ uint32_t count = 0;
-+ gotgctl_data_t gotgctl = { .d32 = 0 };
-+
-+ gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
-+ DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
-+ DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
-+
-+ /* B-Device connector (Device Mode) */
-+ if (gotgctl.b.conidsts) {
-+ dwc_otg_pcd_t *pcd;
-+
-+ /* Wait for switch to device mode. */
-+ while (!dwc_otg_is_device_mode(core_if)){
-+ DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n",
-+ (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral"));
-+ MDELAY(100);
-+ if (++count > 10000) *(uint32_t*)NULL=0;
-+ }
-+ core_if->op_state = B_PERIPHERAL;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+
-+ pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-+ if(unlikely(!pcd)) {
-+ DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-+ BUG();
-+ }
-+ SPIN_LOCK(&pcd->lock);
-+
-+ pcd_start(core_if);
-+
-+ SPIN_UNLOCK(&pcd->lock);
-+ } else {
-+ /* A-Device connector (Host Mode) */
-+ while (!dwc_otg_is_host_mode(core_if)) {
-+ DWC_PRINT("Waiting for Host Mode, Mode=%s\n",
-+ (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral"));
-+ MDELAY(100);
-+ if (++count > 10000) *(uint32_t*)NULL=0;
-+ }
-+ core_if->op_state = A_HOST;
-+ /*
-+ * Initialize the Core for Host mode.
-+ */
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ hcd_start(core_if);
-+ }
-+}
-+
-+
-+/**
-+ * This function handles the Connector ID Status Change Interrupt. It
-+ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
-+ * is a Device to Host Mode transition or a Host Mode to Device
-+ * Transition.
-+ *
-+ * This only occurs when the cable is connected/removed from the PHY
-+ * connector.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *core_if)
-+{
-+
-+ /*
-+ * Need to disable SOF interrupt immediately. If switching from device
-+ * to host, the PCD interrupt handler won't handle the interrupt if
-+ * host mode is already set. The HCD interrupt handler won't get
-+ * called if the HCD state is HALT. This means that the interrupt does
-+ * not get handled and Linux complains loudly.
-+ */
-+ gintmsk_data_t gintmsk = { .d32 = 0 };
-+ gintsts_data_t gintsts = { .d32 = 0 };
-+
-+ gintmsk.b.sofintr = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
-+
-+ DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++ (%s)\n",
-+ (dwc_otg_is_host_mode(core_if)?"Host":"Device"));
-+
-+ /*
-+ * Need to schedule a work, as there are possible DELAY function calls
-+ */
-+ queue_work(core_if->wq_otg, &core_if->w_conn_id);
-+
-+ /* Set flag and clear interrupt */
-+ gintsts.b.conidstschng = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that a device is initiating the Session
-+ * Request Protocol to request the host to turn on bus power so a new
-+ * session can begin. The handler responds by turning on bus power. If
-+ * the DWC_otg controller is in low power mode, the handler brings the
-+ * controller out of low power mode before turning on bus power.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t *core_if)
-+{
-+ hprt0_data_t hprt0;
-+ gintsts_data_t gintsts;
-+
-+#ifndef DWC_HOST_ONLY
-+ DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");
-+
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ DWC_PRINT("SRP: Device mode\n");
-+ } else {
-+ DWC_PRINT("SRP: Host mode\n");
-+
-+ /* Turn on the port power bit. */
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtpwr = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ /* Start the Connection timer. So a message can be displayed
-+ * if connect does not occur within 10 seconds. */
-+ hcd_session_start(core_if);
-+ }
-+#endif
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.sessreqintr = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+void w_wakeup_detected(void *p)
-+{
-+ dwc_otg_core_if_t* core_if = p;
-+
-+#else
-+
-+void w_wakeup_detected(struct work_struct *p)
-+{
-+ struct delayed_work *dw = container_of(p, struct delayed_work, work);
-+ dwc_otg_core_if_t *core_if = container_of(dw, dwc_otg_core_if_t, w_wkp);
-+
-+#endif
-+ /*
-+ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
-+ * so that OPT tests pass with all PHYs).
-+ */
-+ hprt0_data_t hprt0 = {.d32=0};
-+#if 0
-+ pcgcctl_data_t pcgcctl = {.d32=0};
-+ /* Restart the Phy Clock */
-+ pcgcctl.b.stoppclk = 1;
-+ dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0);
-+ UDELAY(10);
-+#endif //0
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
-+// MDELAY(70);
-+ hprt0.b.prtres = 0; /* Resume */
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(core_if->host_if->hprt0));
-+}
-+/**
-+ * This interrupt indicates that the DWC_otg controller has detected a
-+ * resume or remote wakeup sequence. If the DWC_otg controller is in
-+ * low power mode, the handler must brings the controller out of low
-+ * power mode. The controller automatically begins resume
-+ * signaling. The handler schedules a time to stop resume signaling.
-+ */
-+int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t *core_if)
-+{
-+ gintsts_data_t gintsts;
-+
-+ DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
-+
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ dctl_data_t dctl = {.d32=0};
-+ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n",
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts));
-+#ifdef PARTIAL_POWER_DOWN
-+ if (core_if->hwcfg4.b.power_optimiz) {
-+ pcgcctl_data_t power = {.d32=0};
-+
-+ power.d32 = dwc_read_reg32(core_if->pcgcctl);
-+ DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32);
-+
-+ power.b.stoppclk = 0;
-+ dwc_write_reg32(core_if->pcgcctl, power.d32);
-+
-+ power.b.pwrclmp = 0;
-+ dwc_write_reg32(core_if->pcgcctl, power.d32);
-+
-+ power.b.rstpdwnmodule = 0;
-+ dwc_write_reg32(core_if->pcgcctl, power.d32);
-+ }
-+#endif
-+ /* Clear the Remote Wakeup Signalling */
-+ dctl.b.rmtwkupsig = 1;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl,
-+ dctl.d32, 0);
-+
-+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
-+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
-+ }
-+
-+ } else {
-+ pcgcctl_data_t pcgcctl = {.d32=0};
-+
-+ /* Restart the Phy Clock */
-+ pcgcctl.b.stoppclk = 1;
-+ dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0);
-+
-+ queue_delayed_work(core_if->wq_otg, &core_if->w_wkp, ((70 * HZ / 1000) + 1));
-+ }
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.wkupintr = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that a device has been disconnected from
-+ * the root port.
-+ */
-+int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t *core_if)
-+{
-+ gintsts_data_t gintsts;
-+
-+ DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n",
-+ (dwc_otg_is_host_mode(core_if)?"Host":"Device"),
-+ op_state_str(core_if));
-+
-+/** @todo Consolidate this if statement. */
-+#ifndef DWC_HOST_ONLY
-+ if (core_if->op_state == B_HOST) {
-+ dwc_otg_pcd_t *pcd;
-+
-+ /* If in device mode Disconnect and stop the HCD, then
-+ * start the PCD. */
-+ hcd_disconnect(core_if);
-+
-+ pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-+ if(unlikely(!pcd)) {
-+ DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-+ BUG();
-+ }
-+ SPIN_LOCK(&pcd->lock);
-+
-+ pcd_start(core_if);
-+
-+ SPIN_UNLOCK(&pcd->lock);
-+ core_if->op_state = B_PERIPHERAL;
-+ } else if (dwc_otg_is_device_mode(core_if)) {
-+ gotgctl_data_t gotgctl = { .d32 = 0 };
-+ gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
-+ if (gotgctl.b.hstsethnpen==1) {
-+ /* Do nothing, if HNP in process the OTG
-+ * interrupt "Host Negotiation Detected"
-+ * interrupt will do the mode switch.
-+ */
-+ } else if (gotgctl.b.devhnpen == 0) {
-+ dwc_otg_pcd_t *pcd;
-+
-+ /* If in device mode Disconnect and stop the HCD, then
-+ * start the PCD. */
-+ hcd_disconnect(core_if);
-+
-+ pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-+ if(unlikely(!pcd)) {
-+ DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-+ BUG();
-+ }
-+ SPIN_LOCK(&pcd->lock);
-+
-+ pcd_start(core_if);
-+
-+ SPIN_UNLOCK(&pcd->lock);
-+
-+ core_if->op_state = B_PERIPHERAL;
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n");
-+ }
-+ } else {
-+ if (core_if->op_state == A_HOST) {
-+ /* A-Cable still connected but device disconnected. */
-+ hcd_disconnect(core_if);
-+ }
-+ }
-+#endif
-+
-+ gintsts.d32 = 0;
-+ gintsts.b.disconnect = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+/**
-+ * This interrupt indicates that SUSPEND state has been detected on
-+ * the USB.
-+ *
-+ * For HNP the USB Suspend interrupt signals the change from
-+ * "a_peripheral" to "a_host".
-+ *
-+ * When power management is enabled the core will be put in low power
-+ * mode.
-+ */
-+int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *core_if)
-+{
-+ dsts_data_t dsts;
-+ gintsts_data_t gintsts;
-+
-+ DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n");
-+
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ dwc_otg_pcd_t *pcd;
-+
-+ /* Check the Device status register to determine if the Suspend
-+ * state is active. */
-+ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-+ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
-+ DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
-+ "HWCFG4.power Optimize=%d\n",
-+ dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz);
-+
-+
-+#ifdef PARTIAL_POWER_DOWN
-+/** @todo Add a module parameter for power management. */
-+
-+ if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) {
-+ pcgcctl_data_t power = {.d32=0};
-+ DWC_DEBUGPL(DBG_CIL, "suspend\n");
-+
-+ power.b.pwrclmp = 1;
-+ dwc_write_reg32(core_if->pcgcctl, power.d32);
-+
-+ power.b.rstpdwnmodule = 1;
-+ dwc_modify_reg32(core_if->pcgcctl, 0, power.d32);
-+
-+ power.b.stoppclk = 1;
-+ dwc_modify_reg32(core_if->pcgcctl, 0, power.d32);
-+
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY,"disconnect?\n");
-+ }
-+#endif
-+ /* PCD callback for suspend. */
-+ pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-+ if(unlikely(!pcd)) {
-+ DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-+ BUG();
-+ }
-+ SPIN_LOCK(&pcd->lock);
-+
-+ pcd_suspend(core_if);
-+
-+ SPIN_UNLOCK(&pcd->lock);
-+ } else {
-+ if (core_if->op_state == A_PERIPHERAL) {
-+ dwc_otg_pcd_t *pcd;
-+
-+ DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n");
-+ /* Clear the a_peripheral flag, back to a_host. */
-+
-+ pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
-+ if(unlikely(!pcd)) {
-+ DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
-+ BUG();
-+ }
-+ SPIN_LOCK(&pcd->lock);
-+
-+ pcd_stop(core_if);
-+
-+ SPIN_UNLOCK(&pcd->lock);
-+
-+ hcd_start(core_if);
-+ core_if->op_state = A_HOST;
-+ }
-+ }
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.usbsuspend = 1;
-+ dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+
-+/**
-+ * This function returns the Core Interrupt register.
-+ */
-+static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *core_if)
-+{
-+ gintsts_data_t gintsts;
-+ gintmsk_data_t gintmsk;
-+ gintmsk_data_t gintmsk_common = {.d32=0};
-+ gintmsk_common.b.wkupintr = 1;
-+ gintmsk_common.b.sessreqintr = 1;
-+ gintmsk_common.b.conidstschng = 1;
-+ gintmsk_common.b.otgintr = 1;
-+ gintmsk_common.b.modemismatch = 1;
-+ gintmsk_common.b.disconnect = 1;
-+ gintmsk_common.b.usbsuspend = 1;
-+ /** @todo: The port interrupt occurs while in device
-+ * mode. Added code to CIL to clear the interrupt for now!
-+ */
-+ gintmsk_common.b.portintr = 1;
-+
-+ gintsts.d32 = dwc_read_reg32(&core_if->core_global_regs->gintsts);
-+ gintmsk.d32 = dwc_read_reg32(&core_if->core_global_regs->gintmsk);
-+#ifdef DEBUG
-+ /* if any common interrupts set */
-+ if (gintsts.d32 & gintmsk_common.d32) {
-+ DWC_DEBUGPL(DBG_ANY, "gintsts=%08x gintmsk=%08x\n",
-+ gintsts.d32, gintmsk.d32);
-+ }
-+#endif
-+
-+ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
-+
-+}
-+
-+/**
-+ * Common interrupt handler.
-+ *
-+ * The common interrupts are those that occur in both Host and Device mode.
-+ * This handler handles the following interrupts:
-+ * - Mode Mismatch Interrupt
-+ * - Disconnect Interrupt
-+ * - OTG Interrupt
-+ * - Connector ID Status Change Interrupt
-+ * - Session Request Interrupt.
-+ * - Resume / Remote Wakeup Detected Interrupt.
-+ *
-+ */
-+int32_t dwc_otg_handle_common_intr(dwc_otg_core_if_t *core_if)
-+{
-+ int retval = 0;
-+ gintsts_data_t gintsts;
-+
-+ gintsts.d32 = dwc_otg_read_common_intr(core_if);
-+
-+ if (gintsts.b.modemismatch) {
-+ retval |= dwc_otg_handle_mode_mismatch_intr(core_if);
-+ }
-+ if (gintsts.b.otgintr) {
-+ retval |= dwc_otg_handle_otg_intr(core_if);
-+ }
-+ if (gintsts.b.conidstschng) {
-+ retval |= dwc_otg_handle_conn_id_status_change_intr(core_if);
-+ }
-+ if (gintsts.b.disconnect) {
-+ retval |= dwc_otg_handle_disconnect_intr(core_if);
-+ }
-+ if (gintsts.b.sessreqintr) {
-+ retval |= dwc_otg_handle_session_req_intr(core_if);
-+ }
-+ if (gintsts.b.wkupintr) {
-+ retval |= dwc_otg_handle_wakeup_detected_intr(core_if);
-+ }
-+ if (gintsts.b.usbsuspend) {
-+ retval |= dwc_otg_handle_usb_suspend_intr(core_if);
-+ }
-+ if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) {
-+ /* The port interrupt occurs while in device mode with HPRT0
-+ * Port Enable/Disable.
-+ */
-+ gintsts.d32 = 0;
-+ gintsts.b.portintr = 1;
-+ dwc_write_reg32(&core_if->core_global_regs->gintsts,
-+ gintsts.d32);
-+ retval |= 1;
-+
-+ }
-+
-+ S3C2410X_CLEAR_EINTPEND();
-+
-+ return retval;
-+}
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_driver.c
-@@ -0,0 +1,1283 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.c $
-+ * $Revision: #63 $
-+ * $Date: 2008/09/24 $
-+ * $Change: 1101777 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ * The dwc_otg_driver module provides the initialization and cleanup entry
-+ * points for the DWC_otg driver. This module will be dynamically installed
-+ * after Linux is booted using the insmod command. When the module is
-+ * installed, the dwc_otg_driver_init function is called. When the module is
-+ * removed (using rmmod), the dwc_otg_driver_cleanup function is called.
-+ *
-+ * This module also defines a data structure for the dwc_otg_driver, which is
-+ * used in conjunction with the standard ARM lm_device structure. These
-+ * structures allow the OTG driver to comply with the standard Linux driver
-+ * model in which devices and drivers are registered with a bus driver. This
-+ * has the benefit that Linux can expose attributes of the driver and device
-+ * in its special sysfs file system. Users can then read or write files in
-+ * this file system to perform diagnostics on the driver components or the
-+ * device.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/stat.h> /* permission constants */
-+#include <linux/version.h>
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+# include <linux/irq.h>
-+#endif
-+
-+#include <asm/io.h>
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+# include <asm/irq.h>
-+#endif
-+
-+//#include <asm/arch/lm.h>
-+#include <mach/lm.h>
-+#include <mach/board.h>
-+#include <asm/sizes.h>
-+#include <mach/pm.h>
-+
-+#include "dwc_otg_plat.h"
-+#include "dwc_otg_attr.h"
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_cil.h"
-+#include "dwc_otg_pcd.h"
-+#include "dwc_otg_hcd.h"
-+
-+#define DWC_DRIVER_VERSION "2.72a 24-JUN-2008"
-+#define DWC_DRIVER_DESC "HS OTG USB Controller driver"
-+
-+static const char dwc_driver_name[] = "dwc_otg";
-+
-+/*-------------------------------------------------------------------------*/
-+/* Encapsulate the module parameter settings */
-+
-+static dwc_otg_core_params_t dwc_otg_module_params = {
-+ .opt = -1,
-+ .otg_cap = -1,
-+ .dma_enable = -1,
-+ .dma_desc_enable = -1,
-+ .dma_burst_size = -1,
-+ .speed = -1,
-+ .host_support_fs_ls_low_power = -1,
-+ .host_ls_low_power_phy_clk = -1,
-+ .enable_dynamic_fifo = -1,
-+ .data_fifo_size = -1,
-+ .dev_rx_fifo_size = -1,
-+ .dev_nperio_tx_fifo_size = -1,
-+ .dev_perio_tx_fifo_size = {
-+ /* dev_perio_tx_fifo_size_1 */
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1
-+ /* 15 */
-+ },
-+ .host_rx_fifo_size = -1,
-+ .host_nperio_tx_fifo_size = -1,
-+ .host_perio_tx_fifo_size = -1,
-+ .max_transfer_size = -1,
-+ .max_packet_count = -1,
-+ .host_channels = -1,
-+ .dev_endpoints = -1,
-+ .phy_type = -1,
-+ .phy_utmi_width = -1,
-+ .phy_ulpi_ddr = -1,
-+ .phy_ulpi_ext_vbus = -1,
-+ .i2c_enable = -1,
-+ .ulpi_fs_ls = -1,
-+ .ts_dline = -1,
-+ .en_multiple_tx_fifo = -1,
-+ .dev_tx_fifo_size = {
-+ /* dev_tx_fifo_size */
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1
-+ /* 15 */
-+ },
-+ .thr_ctl = -1,
-+ .tx_thr_length = -1,
-+ .rx_thr_length = -1,
-+ .pti_enable = -1,
-+ .mpi_enable = -1,
-+};
-+
-+/**
-+ * This function shows the Driver Version.
-+ */
-+static ssize_t version_show(struct device_driver *dev, char *buf)
-+{
-+ return snprintf(buf, sizeof(DWC_DRIVER_VERSION)+2, "%s\n",
-+ DWC_DRIVER_VERSION);
-+}
-+static DRIVER_ATTR(version, S_IRUGO, version_show, NULL);
-+
-+/**
-+ * Global Debug Level Mask.
-+ */
-+uint32_t g_dbg_lvl = 0; /* OFF */
-+
-+/**
-+ * This function shows the driver Debug Level.
-+ */
-+static ssize_t dbg_level_show(struct device_driver *drv, char *buf)
-+{
-+ return sprintf(buf, "0x%0x\n", g_dbg_lvl);
-+}
-+
-+/**
-+ * This function stores the driver Debug Level.
-+ */
-+static ssize_t dbg_level_store(struct device_driver *drv, const char *buf,
-+ size_t count)
-+{
-+ g_dbg_lvl = simple_strtoul(buf, NULL, 16);
-+ return count;
-+}
-+static DRIVER_ATTR(debuglevel, S_IRUGO|S_IWUSR, dbg_level_show, dbg_level_store);
-+
-+/**
-+ * This function is called during module intialization to verify that
-+ * the module parameters are in a valid state.
-+ */
-+static int check_parameters(dwc_otg_core_if_t *core_if)
-+{
-+ int i;
-+ int retval = 0;
-+
-+/* Checks if the parameter is outside of its valid range of values */
-+#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \
-+ ((dwc_otg_module_params._param_ < (_low_)) || \
-+ (dwc_otg_module_params._param_ > (_high_)))
-+
-+/* If the parameter has been set by the user, check that the parameter value is
-+ * within the value range of values. If not, report a module error. */
-+#define DWC_OTG_PARAM_ERR(_param_, _low_, _high_, _string_) \
-+ do { \
-+ if (dwc_otg_module_params._param_ != -1) { \
-+ if (DWC_OTG_PARAM_TEST(_param_, (_low_), (_high_))) { \
-+ DWC_ERROR("`%d' invalid for parameter `%s'\n", \
-+ dwc_otg_module_params._param_, _string_); \
-+ dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
-+ retval++; \
-+ } \
-+ } \
-+ } while (0)
-+
-+ DWC_OTG_PARAM_ERR(opt,0,1,"opt");
-+ DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap");
-+ DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable");
-+ DWC_OTG_PARAM_ERR(dma_desc_enable,0,1,"dma_desc_enable");
-+ DWC_OTG_PARAM_ERR(speed,0,1,"speed");
-+ DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power");
-+ DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk");
-+ DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo");
-+ DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size");
-+ DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size");
-+ DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size");
-+ DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size");
-+ DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size");
-+ DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size");
-+ DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size");
-+ DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count");
-+ DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels");
-+ DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints");
-+ DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type");
-+ DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr");
-+ DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus");
-+ DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable");
-+ DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls");
-+ DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline");
-+
-+ if (dwc_otg_module_params.dma_burst_size != -1) {
-+ if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,4,4) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,8,8) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,16,16) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,32,32) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,64,64) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,128,128) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,256,256)) {
-+ DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n",
-+ dwc_otg_module_params.dma_burst_size);
-+ dwc_otg_module_params.dma_burst_size = 32;
-+ retval++;
-+ }
-+
-+ {
-+ uint8_t brst_sz = 0;
-+ while(dwc_otg_module_params.dma_burst_size > 1) {
-+ brst_sz ++;
-+ dwc_otg_module_params.dma_burst_size >>= 1;
-+ }
-+ dwc_otg_module_params.dma_burst_size = brst_sz;
-+ }
-+ }
-+
-+ if (dwc_otg_module_params.phy_utmi_width != -1) {
-+ if (DWC_OTG_PARAM_TEST(phy_utmi_width, 8, 8) &&
-+ DWC_OTG_PARAM_TEST(phy_utmi_width, 16, 16)) {
-+ DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n",
-+ dwc_otg_module_params.phy_utmi_width);
-+ dwc_otg_module_params.phy_utmi_width = 16;
-+ retval++;
-+ }
-+ }
-+
-+ for (i = 0; i < 15; i++) {
-+ /** @todo should be like above */
-+ //DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i], 4, 768, "dev_perio_tx_fifo_size");
-+ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
-+ if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i], 4, 768)) {
-+ DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i);
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
-+ retval++;
-+ }
-+ }
-+ }
-+
-+ DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo");
-+
-+ for (i = 0; i < 15; i++) {
-+ /** @todo should be like above */
-+ //DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i], 4, 768, "dev_tx_fifo_size");
-+ if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
-+ if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) {
-+ DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
-+ dwc_otg_module_params.dev_tx_fifo_size[i], "dev_tx_fifo_size", i);
-+ dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default;
-+ retval++;
-+ }
-+ }
-+ }
-+
-+ DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl");
-+ DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length");
-+ DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length");
-+
-+ DWC_OTG_PARAM_ERR(pti_enable,0,1,"pti_enable");
-+ DWC_OTG_PARAM_ERR(mpi_enable,0,1,"mpi_enable");
-+
-+ /* At this point, all module parameters that have been set by the user
-+ * are valid, and those that have not are left unset. Now set their
-+ * default values and/or check the parameters against the hardware
-+ * configurations of the OTG core. */
-+
-+/* This sets the parameter to the default value if it has not been set by the
-+ * user */
-+#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \
-+ ({ \
-+ int changed = 1; \
-+ if (dwc_otg_module_params._param_ == -1) { \
-+ changed = 0; \
-+ dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
-+ } \
-+ changed; \
-+ })
-+
-+/* This checks the macro agains the hardware configuration to see if it is
-+ * valid. It is possible that the default value could be invalid. In this
-+ * case, it will report a module error if the user touched the parameter.
-+ * Otherwise it will adjust the value without any error. */
-+#define DWC_OTG_PARAM_CHECK_VALID(_param_, _str_, _is_valid_, _set_valid_) \
-+ ({ \
-+ int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \
-+ int error = 0; \
-+ if (!(_is_valid_)) { \
-+ if (changed) { \
-+ DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_, _str_); \
-+ error = 1; \
-+ } \
-+ dwc_otg_module_params._param_ = (_set_valid_); \
-+ } \
-+ error; \
-+ })
-+
-+ /* OTG Cap */
-+ retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap, "otg_cap",
-+ ({
-+ int valid;
-+ valid = 1;
-+ switch (dwc_otg_module_params.otg_cap) {
-+ case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
-+ if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
-+ valid = 0;
-+ break;
-+ case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
-+ if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) &&
-+ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) &&
-+ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) &&
-+ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
-+ valid = 0;
-+ }
-+ break;
-+ case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
-+ /* always valid */
-+ break;
-+ }
-+ valid;
-+ }),
-+ (((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ||
-+ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ||
-+ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
-+ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
-+ DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable, "dma_enable",
-+ ((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1,
-+ 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(dma_desc_enable, "dma_desc_enable",
-+ ((dwc_otg_module_params.dma_desc_enable == 1) &&
-+ ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.desc_dma == 0))) ? 0 : 1,
-+ 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(opt, "opt", 1, 0);
-+
-+ DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power,
-+ "host_support_fs_ls_low_power",
-+ 1, 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo,
-+ "enable_dynamic_fifo",
-+ ((dwc_otg_module_params.enable_dynamic_fifo == 0) ||
-+ (core_if->hwcfg2.b.dynamic_fifo == 1)), 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size,
-+ "data_fifo_size",
-+ (dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth),
-+ core_if->hwcfg3.b.dfifo_depth);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size,
-+ "dev_rx_fifo_size",
-+ (dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
-+ dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size,
-+ "dev_nperio_tx_fifo_size",
-+ (dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
-+ (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size,
-+ "host_rx_fifo_size",
-+ (dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
-+ dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size,
-+ "host_nperio_tx_fifo_size",
-+ (dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
-+ (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size,
-+ "host_perio_tx_fifo_size",
-+ (dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))),
-+ ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16)));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size,
-+ "max_transfer_size",
-+ (dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))),
-+ ((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count,
-+ "max_packet_count",
-+ (dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))),
-+ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_channels,
-+ "host_channels",
-+ (dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)),
-+ (core_if->hwcfg2.b.num_host_chan + 1));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints,
-+ "dev_endpoints",
-+ (dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)),
-+ core_if->hwcfg2.b.num_dev_ep);
-+
-+/*
-+ * Define the following to disable the FS PHY Hardware checking. This is for
-+ * internal testing only.
-+ *
-+ * #define NO_FS_PHY_HW_CHECKS
-+ */
-+
-+#ifdef NO_FS_PHY_HW_CHECKS
-+ retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
-+ "phy_type", 1, 0);
-+#else
-+ retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
-+ "phy_type",
-+ ({
-+ int valid = 0;
-+ if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) &&
-+ ((core_if->hwcfg2.b.hs_phy_type == 1) ||
-+ (core_if->hwcfg2.b.hs_phy_type == 3))) {
-+ valid = 1;
-+ }
-+ else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) &&
-+ ((core_if->hwcfg2.b.hs_phy_type == 2) ||
-+ (core_if->hwcfg2.b.hs_phy_type == 3))) {
-+ valid = 1;
-+ }
-+ else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) &&
-+ (core_if->hwcfg2.b.fs_phy_type == 1)) {
-+ valid = 1;
-+ }
-+ valid;
-+ }),
-+ ({
-+ int set = DWC_PHY_TYPE_PARAM_FS;
-+ if (core_if->hwcfg2.b.hs_phy_type) {
-+ if ((core_if->hwcfg2.b.hs_phy_type == 3) ||
-+ (core_if->hwcfg2.b.hs_phy_type == 1)) {
-+ set = DWC_PHY_TYPE_PARAM_UTMI;
-+ }
-+ else {
-+ set = DWC_PHY_TYPE_PARAM_ULPI;
-+ }
-+ }
-+ set;
-+ }));
-+#endif
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(speed, "speed",
-+ (dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1,
-+ dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk,
-+ "host_ls_low_power_phy_clk",
-+ ((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1),
-+ ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ));
-+
-+ DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr);
-+ DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus);
-+ DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width);
-+ DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls);
-+ DWC_OTG_PARAM_SET_DEFAULT(ts_dline);
-+
-+#ifdef NO_FS_PHY_HW_CHECKS
-+ retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, "i2c_enable", 1, 0);
-+#else
-+ retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
-+ "i2c_enable",
-+ (dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1,
-+ 0);
-+#endif
-+
-+ for (i = 0; i < 15; i++) {
-+ int changed = 1;
-+ int error = 0;
-+
-+ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) {
-+ changed = 0;
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
-+ }
-+ if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
-+ if (changed) {
-+ DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i], i);
-+ error = 1;
-+ }
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
-+ }
-+ retval += error;
-+ }
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo, "en_multiple_tx_fifo",
-+ ((dwc_otg_module_params.en_multiple_tx_fifo == 1) && (core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1,
-+ 0);
-+
-+ for (i = 0; i < 15; i++) {
-+ int changed = 1;
-+ int error = 0;
-+
-+ if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) {
-+ changed = 0;
-+ dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default;
-+ }
-+ if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
-+ if (changed) {
-+ DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_tx_fifo_size[i], i);
-+ error = 1;
-+ }
-+ dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
-+ }
-+ retval += error;
-+ }
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(thr_ctl, "thr_ctl",
-+ ((dwc_otg_module_params.thr_ctl != 0) && ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.ded_fifo_en == 0))) ? 0 : 1,
-+ 0);
-+
-+ DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length);
-+ DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(pti_enable, "pti_enable",
-+ ((dwc_otg_module_params.pti_enable == 0) || ((dwc_otg_module_params.pti_enable == 1) && (core_if->snpsid >= 0x4F54272A))) ? 1 : 0,
-+ 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(mpi_enable, "mpi_enable",
-+ ((dwc_otg_module_params.mpi_enable == 0) || ((dwc_otg_module_params.mpi_enable == 1) && (core_if->hwcfg2.b.multi_proc_int == 1))) ? 1 : 0,
-+ 0);
-+ return retval;
-+}
-+
-+/**
-+ * This function is the top level interrupt handler for the Common
-+ * (Device and host modes) interrupts.
-+ */
-+static irqreturn_t dwc_otg_common_irq(int irq, void *dev
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
-+ , struct pt_regs *r
-+#endif
-+ )
-+{
-+ dwc_otg_device_t *otg_dev = dev;
-+ int32_t retval = IRQ_NONE;
-+
-+ retval = dwc_otg_handle_common_intr(otg_dev->core_if);
-+ return IRQ_RETVAL(retval);
-+}
-+
-+/**
-+ * This function is called when a lm_device is unregistered with the
-+ * dwc_otg_driver. This happens, for example, when the rmmod command is
-+ * executed. The device may or may not be electrically present. If it is
-+ * present, the driver stops device processing. Any resources used on behalf
-+ * of this device are freed.
-+ *
-+ * @param[in] lmdev
-+ */
-+static void dwc_otg_driver_remove(struct lm_device *lmdev)
-+{
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lmdev);
-+ DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, lmdev);
-+
-+ if (!otg_dev) {
-+ /* Memory allocation for the dwc_otg_device failed. */
-+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
-+ return;
-+ }
-+
-+ /*
-+ * Free the IRQ
-+ */
-+ if (otg_dev->common_irq_installed) {
-+ free_irq(lmdev->irq, otg_dev);
-+ }
-+
-+#ifndef DWC_DEVICE_ONLY
-+ if (otg_dev->hcd) {
-+ dwc_otg_hcd_remove(lmdev);
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
-+ return;
-+ }
-+#endif
-+
-+#ifndef DWC_HOST_ONLY
-+ if (otg_dev->pcd) {
-+ dwc_otg_pcd_remove(lmdev);
-+ }
-+#endif
-+ if (otg_dev->core_if) {
-+ dwc_otg_cil_remove(otg_dev->core_if);
-+ }
-+
-+ /*
-+ * Remove the device attributes
-+ */
-+ dwc_otg_attr_remove(lmdev);
-+
-+ /*
-+ * Return the memory.
-+ */
-+ if (otg_dev->base) {
-+ cns3xxx_iounmap(otg_dev->base);
-+ }
-+ kfree(otg_dev);
-+
-+ /*
-+ * Clear the drvdata pointer.
-+ */
-+ lm_set_drvdata(lmdev, 0);
-+}
-+
-+/**
-+ * This function is called when an lm_device is bound to a
-+ * dwc_otg_driver. It creates the driver components required to
-+ * control the device (CIL, HCD, and PCD) and it initializes the
-+ * device. The driver components are stored in a dwc_otg_device
-+ * structure. A reference to the dwc_otg_device is saved in the
-+ * lm_device. This allows the driver to access the dwc_otg_device
-+ * structure on subsequent calls to driver methods for this device.
-+ *
-+ * @param[in] lmdev lm_device definition
-+ */
-+static int dwc_otg_driver_probe(struct lm_device *lmdev)
-+{
-+ int retval = 0;
-+ uint32_t snpsid;
-+ dwc_otg_device_t *dwc_otg_device;
-+ u_int32_t val;
-+
-+ dev_dbg(&lmdev->dev, "dwc_otg_driver_probe(%p)\n", lmdev);
-+ dev_dbg(&lmdev->dev, "start=0x%08x\n", (unsigned)lmdev->resource.start);
-+
-+ dwc_otg_device = kmalloc(sizeof(dwc_otg_device_t), GFP_KERNEL);
-+
-+ if (!dwc_otg_device) {
-+ dev_err(&lmdev->dev, "kmalloc of dwc_otg_device failed\n");
-+ retval = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ memset(dwc_otg_device, 0, sizeof(*dwc_otg_device));
-+ dwc_otg_device->reg_offset = 0xFFFFFFFF;
-+
-+ /*
-+ * Map the DWC_otg Core memory into virtual address space.
-+ */
-+#ifdef CNS3XXX_USBOTG_BASE_VIRT
-+ dwc_otg_device->base = (void __iomem *) CNS3XXX_USBOTG_BASE_VIRT;
-+#else
-+ dwc_otg_device->base = ioremap(lmdev->resource.start, SZ_256K);
-+#endif
-+
-+ if (!dwc_otg_device->base) {
-+ dev_err(&lmdev->dev, "cns3xxx_ioremap() failed\n");
-+ retval = -ENOMEM;
-+ goto fail;
-+ }
-+ dev_dbg(&lmdev->dev, "base=0x%08x\n", (unsigned)dwc_otg_device->base);
-+
-+#ifdef CONFIG_SILICON
-+#if 0
-+ //OTG PHY
-+ cns3xxx_pwr_power_up(1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_USB_PHY0);
-+ //USB
-+ //cns3xxx_pwr_power_up(1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_USB_PHY1);
-+#endif
-+ cns3xxx_pwr_power_up(1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
-+ cns3xxx_pwr_clk_en(1<<PM_CLK_GATE_REG_OFFSET_USB_OTG);
-+ cns3xxx_pwr_soft_rst(1<<PM_SOFT_RST_REG_OFFST_USB_OTG);
-+ //cns3xxx_pwr_clk_en(1<<PM_CLK_GATE_REG_OFFSET_USB_HOST);
-+ //cns3xxx_pwr_soft_rst(1<<PM_SOFT_RST_REG_OFFST_USB_HOST);
-+#ifdef CONFIG_USB_CNS3XXX_OTG_ENABLE_OTG_DRVVBUS
-+ *((volatile u32*) (CNS3XXX_MISC_BASE_VIRT/*0x7600_0000*/+0x14)) |= (1<<3);
-+#endif //#ifdef CONFIG_USB_CNS3XXX_OTG_ENABLE_OTG_DRVVBUS
-+
-+#endif //CONFIG_SILICON
-+
-+ /*
-+ * Attempt to ensure this device is really a DWC_otg Controller.
-+ * Read and verify the SNPSID register contents. The value should be
-+ * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX".
-+ */
-+ snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)dwc_otg_device->base + 0x40));
-+
-+ if ((snpsid & 0xFFFFF000) != OTG_CORE_REV_2_00) {
-+ dev_err(&lmdev->dev, "Bad value for SNPSID: 0x%08x\n", snpsid);
-+ retval = -EINVAL;
-+ goto fail;
-+ }
-+
-+ DWC_PRINT("Core Release: %x.%x%x%x\n",
-+ (snpsid >> 12 & 0xF),
-+ (snpsid >> 8 & 0xF),
-+ (snpsid >> 4 & 0xF),
-+ (snpsid & 0xF));
-+
-+
-+
-+ // de-assert otgdisable
-+ val=__raw_readl((void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0808));
-+ __raw_writel(val&(~(1 << 10)), (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0808));
-+ val=__raw_readl((void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0808));
-+ DWC_DEBUGPL(DBG_CIL, "de-assert otgdisable(bit10): MISC_USBPHY00_CFG_REG=%.8x\n",val);
-+
-+
-+#ifdef ENDIAN_MODE_BIG_ENDIAN
-+ // bit[18]:otg endian, bit[19]:usbh endian
-+ val=__raw_readl((void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0800));
-+ __raw_writel(val|(1 << 18), (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0800));
-+#endif
-+ val=__raw_readl((void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0800));
-+ DWC_DEBUGPL(DBG_CIL, "OTG endian(bit18): MISC_USB_CFG_REG=%.8x, OTG in %s endian mode\n",val,(val&(1<<18))?"big":"little");
-+
-+/*
-+ // PMU control
-+ HAL_PMU_POWER_ON_USB_PHY1();
-+ HAL_PMU_POWER_ON_USB_PHY0();
-+
-+ HAL_PMU_POWER_ON_USB();
-+
-+ HAL_PMU_ENABLE_USB_OTG_CLOCK();
-+ HAL_PMU_ENABLE_USB_HOST_CLOCK();
-+
-+ Hal_Pmu_Software_Reset(PMU_USB_OTG_SOFTWARE_RESET_BIT_INDEX);
-+ Hal_Pmu_Software_Reset(PMU_USB_HOST_SOFTWARE_RESET_BIT_INDEX);
-+*/
-+
-+ /*
-+ * Initialize driver data to point to the global DWC_otg
-+ * Device structure.
-+ */
-+ lm_set_drvdata(lmdev, dwc_otg_device);
-+ dev_dbg(&lmdev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device);
-+
-+ dwc_otg_device->core_if = dwc_otg_cil_init(dwc_otg_device->base,
-+ &dwc_otg_module_params);
-+
-+ dwc_otg_device->core_if->snpsid = snpsid;
-+
-+ if (!dwc_otg_device->core_if) {
-+ dev_err(&lmdev->dev, "CIL initialization failed!\n");
-+ retval = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ /*
-+ * Validate parameter values.
-+ */
-+ if (check_parameters(dwc_otg_device->core_if)) {
-+ retval = -EINVAL;
-+ goto fail;
-+ }
-+
-+ /*
-+ * Create Device Attributes in sysfs
-+ */
-+ dwc_otg_attr_create(lmdev);
-+
-+ /*
-+ * Disable the global interrupt until all the interrupt
-+ * handlers are installed.
-+ */
-+ dwc_otg_disable_global_interrupts(dwc_otg_device->core_if);
-+
-+ /*
-+ * Install the interrupt handler for the common interrupts before
-+ * enabling common interrupts in core_init below.
-+ */
-+ DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n",
-+ lmdev->irq);
-+ retval = request_irq(lmdev->irq, dwc_otg_common_irq,
-+ IRQF_SHARED, "dwc_otg", dwc_otg_device);
-+ if (retval) {
-+ DWC_ERROR("request of irq%d failed\n", lmdev->irq);
-+ retval = -EBUSY;
-+ goto fail;
-+ } else {
-+ dwc_otg_device->common_irq_installed = 1;
-+ }
-+
-+ /*
-+ * Initialize the DWC_otg core.
-+ */
-+ dwc_otg_core_init(dwc_otg_device->core_if);
-+
-+#ifndef DWC_HOST_ONLY
-+ /*
-+ * Initialize the PCD
-+ */
-+ retval = dwc_otg_pcd_init(lmdev);
-+ if (retval != 0) {
-+ DWC_ERROR("dwc_otg_pcd_init failed\n");
-+ dwc_otg_device->pcd = NULL;
-+ goto fail;
-+ }
-+#endif
-+#ifndef DWC_DEVICE_ONLY
-+ /*
-+ * Initialize the HCD
-+ */
-+ retval = dwc_otg_hcd_init(lmdev);
-+ if (retval != 0) {
-+ DWC_ERROR("dwc_otg_hcd_init failed\n");
-+ dwc_otg_device->hcd = NULL;
-+ goto fail;
-+ }
-+#endif
-+
-+ /*
-+ * Enable the global interrupt after all the interrupt
-+ * handlers are installed.
-+ */
-+ dwc_otg_enable_global_interrupts(dwc_otg_device->core_if);
-+
-+ return 0;
-+
-+ fail:
-+ dwc_otg_driver_remove(lmdev);
-+ return retval;
-+}
-+
-+/**
-+ * This structure defines the methods to be called by a bus driver
-+ * during the lifecycle of a device on that bus. Both drivers and
-+ * devices are registered with a bus driver. The bus driver matches
-+ * devices to drivers based on information in the device and driver
-+ * structures.
-+ *
-+ * The probe function is called when the bus driver matches a device
-+ * to this driver. The remove function is called when a device is
-+ * unregistered with the bus driver.
-+ */
-+static struct lm_driver dwc_otg_driver = {
-+ .drv = {
-+ .name = (char *)dwc_driver_name,
-+ },
-+ .probe = dwc_otg_driver_probe,
-+ .remove = dwc_otg_driver_remove,
-+};
-+
-+/**
-+ * This function is called when the dwc_otg_driver is installed with the
-+ * insmod command. It registers the dwc_otg_driver structure with the
-+ * appropriate bus driver. This will cause the dwc_otg_driver_probe function
-+ * to be called. In addition, the bus driver will automatically expose
-+ * attributes defined for the device and driver in the special sysfs file
-+ * system.
-+ *
-+ * @return
-+ */
-+static int __init dwc_otg_driver_init(void)
-+{
-+ int retval = 0;
-+ int error;
-+ printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION);
-+
-+ retval = lm_driver_register(&dwc_otg_driver);
-+ if (retval < 0) {
-+ printk(KERN_ERR "%s retval=%d\n", __func__, retval);
-+ return retval;
-+ }
-+ error = driver_create_file(&dwc_otg_driver.drv, &driver_attr_version);
-+ error = driver_create_file(&dwc_otg_driver.drv, &driver_attr_debuglevel);
-+
-+ return retval;
-+}
-+module_init(dwc_otg_driver_init);
-+
-+/**
-+ * This function is called when the driver is removed from the kernel
-+ * with the rmmod command. The driver unregisters itself with its bus
-+ * driver.
-+ *
-+ */
-+static void __exit dwc_otg_driver_cleanup(void)
-+{
-+ printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n");
-+
-+ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_debuglevel);
-+ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_version);
-+
-+ lm_driver_unregister(&dwc_otg_driver);
-+
-+ printk(KERN_INFO "%s module removed\n", dwc_driver_name);
-+}
-+module_exit(dwc_otg_driver_cleanup);
-+
-+MODULE_DESCRIPTION(DWC_DRIVER_DESC);
-+MODULE_AUTHOR("Synopsys Inc.");
-+MODULE_LICENSE("GPL");
-+
-+module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
-+MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
-+module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
-+MODULE_PARM_DESC(opt, "OPT Mode");
-+module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
-+MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
-+
-+module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, 0444);
-+MODULE_PARM_DESC(dma_desc_enable, "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled");
-+
-+module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444);
-+MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
-+module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
-+MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
-+module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444);
-+MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support");
-+module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
-+MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
-+module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
-+MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
-+module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444);
-+MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
-+module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-+module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-+module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-+module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-+module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
-+module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444);
-+/** @todo Set the max to 512K, modify checks */
-+MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
-+module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444);
-+MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
-+module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444);
-+MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
-+module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444);
-+MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
-+module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
-+MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
-+module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444);
-+MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
-+module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
-+MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double");
-+module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444);
-+MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal");
-+module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
-+MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
-+module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
-+MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
-+module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
-+MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
-+module_param_named(debug, g_dbg_lvl, int, 0444);
-+MODULE_PARM_DESC(debug, "");
-+
-+module_param_named(en_multiple_tx_fifo, dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
-+MODULE_PARM_DESC(en_multiple_tx_fifo, "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
-+module_param_named(dev_tx_fifo_size_1, dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_2, dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_3, dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_4, dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_5, dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_6, dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_7, dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_8, dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_9, dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_10, dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_11, dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_12, dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_13, dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_14, dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_15, dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
-+
-+module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
-+MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
-+module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444);
-+MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
-+module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444);
-+MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
-+
-+module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444);
-+MODULE_PARM_DESC(pti_enable, "Per Transfer Interrupt mode 0=disabled 1=enabled");
-+
-+module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444);
-+MODULE_PARM_DESC(mpi_enable, "Multiprocessor Interrupt mode 0=disabled 1=enabled");
-+
-+/** @page "Module Parameters"
-+ *
-+ * The following parameters may be specified when starting the module.
-+ * These parameters define how the DWC_otg controller should be
-+ * configured. Parameter values are passed to the CIL initialization
-+ * function dwc_otg_cil_init
-+ *
-+ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code>
-+ *
-+
-+ <table>
-+ <tr><td>Parameter Name</td><td>Meaning</td></tr>
-+
-+ <tr>
-+ <td>otg_cap</td>
-+ <td>Specifies the OTG capabilities. The driver will automatically detect the
-+ value for this parameter if none is specified.
-+ - 0: HNP and SRP capable (default, if available)
-+ - 1: SRP Only capable
-+ - 2: No HNP/SRP capable
-+ </td></tr>
-+
-+ <tr>
-+ <td>dma_enable</td>
-+ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: Slave
-+ - 1: DMA (default, if available)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dma_burst_size</td>
-+ <td>The DMA Burst size (applicable only for External DMA Mode).
-+ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32)
-+ </td></tr>
-+
-+ <tr>
-+ <td>speed</td>
-+ <td>Specifies the maximum speed of operation in host and device mode. The
-+ actual speed depends on the speed of the attached device and the value of
-+ phy_type.
-+ - 0: High Speed (default)
-+ - 1: Full Speed
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_support_fs_ls_low_power</td>
-+ <td>Specifies whether low power mode is supported when attached to a Full
-+ Speed or Low Speed device in host mode.
-+ - 0: Don't support low power mode (default)
-+ - 1: Support low power mode
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_ls_low_power_phy_clk</td>
-+ <td>Specifies the PHY clock rate in low power mode when connected to a Low
-+ Speed device in host mode. This parameter is applicable only if
-+ HOST_SUPPORT_FS_LS_LOW_POWER is enabled.
-+ - 0: 48 MHz (default)
-+ - 1: 6 MHz
-+ </td></tr>
-+
-+ <tr>
-+ <td>enable_dynamic_fifo</td>
-+ <td> Specifies whether FIFOs may be resized by the driver software.
-+ - 0: Use cC FIFO size parameters
-+ - 1: Allow dynamic FIFO sizing (default)
-+ </td></tr>
-+
-+ <tr>
-+ <td>data_fifo_size</td>
-+ <td>Total number of 4-byte words in the data FIFO memory. This memory
-+ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs.
-+ - Values: 32 to 32768 (default 8192)
-+
-+ Note: The total FIFO memory depth in the FPGA configuration is 8192.
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_rx_fifo_size</td>
-+ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic
-+ FIFO sizing is enabled.
-+ - Values: 16 to 32768 (default 1064)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_nperio_tx_fifo_size</td>
-+ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when
-+ dynamic FIFO sizing is enabled.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td>
-+ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode
-+ when dynamic FIFO sizing is enabled.
-+ - Values: 4 to 768 (default 256)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_rx_fifo_size</td>
-+ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO
-+ sizing is enabled.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_nperio_tx_fifo_size</td>
-+ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when
-+ dynamic FIFO sizing is enabled in the core.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_perio_tx_fifo_size</td>
-+ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO
-+ sizing is enabled.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>max_transfer_size</td>
-+ <td>The maximum transfer size supported in bytes.
-+ - Values: 2047 to 65,535 (default 65,535)
-+ </td></tr>
-+
-+ <tr>
-+ <td>max_packet_count</td>
-+ <td>The maximum number of packets in a transfer.
-+ - Values: 15 to 511 (default 511)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_channels</td>
-+ <td>The number of host channel registers to use.
-+ - Values: 1 to 16 (default 12)
-+
-+ Note: The FPGA configuration supports a maximum of 12 host channels.
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_endpoints</td>
-+ <td>The number of endpoints in addition to EP0 available for device mode
-+ operations.
-+ - Values: 1 to 15 (default 6 IN and OUT)
-+
-+ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in
-+ addition to EP0.
-+ </td></tr>
-+
-+ <tr>
-+ <td>phy_type</td>
-+ <td>Specifies the type of PHY interface to use. By default, the driver will
-+ automatically detect the phy_type.
-+ - 0: Full Speed
-+ - 1: UTMI+ (default, if available)
-+ - 2: ULPI
-+ </td></tr>
-+
-+ <tr>
-+ <td>phy_utmi_width</td>
-+ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a
-+ phy_type of UTMI+. Also, this parameter is applicable only if the
-+ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the
-+ core has been configured to work at either data path width.
-+ - Values: 8 or 16 bits (default 16)
-+ </td></tr>
-+
-+ <tr>
-+ <td>phy_ulpi_ddr</td>
-+ <td>Specifies whether the ULPI operates at double or single data rate. This
-+ parameter is only applicable if phy_type is ULPI.
-+ - 0: single data rate ULPI interface with 8 bit wide data bus (default)
-+ - 1: double data rate ULPI interface with 4 bit wide data bus
-+ </td></tr>
-+
-+ <tr>
-+ <td>i2c_enable</td>
-+ <td>Specifies whether to use the I2C interface for full speed PHY. This
-+ parameter is only applicable if PHY_TYPE is FS.
-+ - 0: Disabled (default)
-+ - 1: Enabled
-+ </td></tr>
-+
-+ <tr>
-+ <td>otg_en_multiple_tx_fifo</td>
-+ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: Disabled
-+ - 1: Enabled (default, if available)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_tx_fifo_size_n (n = 1 to 15)</td>
-+ <td>Number of 4-byte words in each of the Tx FIFOs in device mode
-+ when dynamic FIFO sizing is enabled.
-+ - Values: 4 to 768 (default 256)
-+ </td></tr>
-+
-+*/
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_driver.h
-@@ -0,0 +1,73 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $
-+ * $Revision: #12 $
-+ * $Date: 2008/07/15 $
-+ * $Change: 1064918 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#ifndef __DWC_OTG_DRIVER_H__
-+#define __DWC_OTG_DRIVER_H__
-+
-+/** @file
-+ * This file contains the interface to the Linux driver.
-+ */
-+#include "dwc_otg_cil.h"
-+
-+/* Type declarations */
-+struct dwc_otg_pcd;
-+struct dwc_otg_hcd;
-+
-+/**
-+ * This structure is a wrapper that encapsulates the driver components used to
-+ * manage a single DWC_otg controller.
-+ */
-+typedef struct dwc_otg_device {
-+ /** Base address returned from ioremap() */
-+ void *base;
-+
-+ struct lm_device *lmdev;
-+
-+ /** Pointer to the core interface structure. */
-+ dwc_otg_core_if_t *core_if;
-+
-+ /** Register offset for Diagnostic API. */
-+ uint32_t reg_offset;
-+
-+ /** Pointer to the PCD structure. */
-+ struct dwc_otg_pcd *pcd;
-+
-+ /** Pointer to the HCD structure. */
-+ struct dwc_otg_hcd *hcd;
-+
-+ /** Flag to indicate whether the common IRQ handler is installed. */
-+ uint8_t common_irq_installed;
-+
-+} dwc_otg_device_t;
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_hcd.c
-@@ -0,0 +1,2919 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $
-+ * $Revision: #75 $
-+ * $Date: 2008/07/15 $
-+ * $Change: 1064940 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the implementation of the HCD. In Linux, the HCD
-+ * implements the hc_driver API.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/string.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/version.h>
-+
-+#include <mach/lm.h>
-+#include <mach/irqs.h>
-+
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_hcd.h"
-+#include "dwc_otg_regs.h"
-+
-+static const char dwc_otg_hcd_name[] = "dwc_otg_hcd";
-+
-+static const struct hc_driver dwc_otg_hc_driver = {
-+
-+ .description = dwc_otg_hcd_name,
-+ .product_desc = "DWC OTG Controller",
-+ .hcd_priv_size = sizeof(dwc_otg_hcd_t),
-+
-+ .irq = dwc_otg_hcd_irq,
-+
-+ .flags = HCD_MEMORY | HCD_USB2,
-+
-+ //.reset =
-+ .start = dwc_otg_hcd_start,
-+ //.suspend =
-+ //.resume =
-+ .stop = dwc_otg_hcd_stop,
-+
-+ .urb_enqueue = dwc_otg_hcd_urb_enqueue,
-+ .urb_dequeue = dwc_otg_hcd_urb_dequeue,
-+ .endpoint_disable = dwc_otg_hcd_endpoint_disable,
-+
-+ .get_frame_number = dwc_otg_hcd_get_frame_number,
-+
-+ .hub_status_data = dwc_otg_hcd_hub_status_data,
-+ .hub_control = dwc_otg_hcd_hub_control,
-+ //.hub_suspend =
-+ //.hub_resume =
-+};
-+
-+/**
-+ * Work queue function for starting the HCD when A-Cable is connected.
-+ * The dwc_otg_hcd_start() must be called in a process context.
-+ */
-+static void hcd_start_func(
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ void *_vp
-+#else
-+ struct work_struct *_work
-+#endif
-+ )
-+{
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ struct usb_hcd *usb_hcd = (struct usb_hcd *)_vp;
-+#else
-+ struct delayed_work *dw = container_of(_work, struct delayed_work, work);
-+ struct dwc_otg_hcd *otg_hcd = container_of(dw, struct dwc_otg_hcd, start_work);
-+ struct usb_hcd *usb_hcd = container_of((void *)otg_hcd, struct usb_hcd, hcd_priv);
-+#endif
-+ DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd);
-+ if (usb_hcd) {
-+ dwc_otg_hcd_start(usb_hcd);
-+ }
-+}
-+
-+/**
-+ * HCD Callback function for starting the HCD when A-Cable is
-+ * connected.
-+ *
-+ * @param p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_start_cb(void *p)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
-+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-+ hprt0_data_t hprt0;
-+
-+ if (core_if->op_state == B_HOST) {
-+ /*
-+ * Reset the port. During a HNP mode switch the reset
-+ * needs to occur within 1ms and have a duration of at
-+ * least 50ms.
-+ */
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtrst = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ ((struct usb_hcd *)p)->self.is_b_host = 1;
-+ } else {
-+ ((struct usb_hcd *)p)->self.is_b_host = 0;
-+ }
-+
-+ /* Need to start the HCD in a non-interrupt context. */
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func, p);
-+// INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func, p);
-+#else
-+// INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
-+ INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
-+#endif
-+// schedule_work(&dwc_otg_hcd->start_work);
-+ queue_delayed_work(core_if->wq_otg, &dwc_otg_hcd->start_work, 50 * HZ / 1000);
-+
-+ return 1;
-+}
-+
-+/**
-+ * HCD Callback function for stopping the HCD.
-+ *
-+ * @param p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_stop_cb(void *p)
-+{
-+ struct usb_hcd *usb_hcd = (struct usb_hcd *)p;
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
-+ dwc_otg_hcd_stop(usb_hcd);
-+ return 1;
-+}
-+
-+static void del_xfer_timers(dwc_otg_hcd_t *hcd)
-+{
-+#ifdef DEBUG
-+ int i;
-+ int num_channels = hcd->core_if->core_params->host_channels;
-+ for (i = 0; i < num_channels; i++) {
-+ del_timer(&hcd->core_if->hc_xfer_timer[i]);
-+ }
-+#endif
-+}
-+
-+static void del_timers(dwc_otg_hcd_t *hcd)
-+{
-+ del_xfer_timers(hcd);
-+ del_timer(&hcd->conn_timer);
-+}
-+
-+/**
-+ * Processes all the URBs in a single list of QHs. Completes them with
-+ * -ETIMEDOUT and frees the QTD.
-+ */
-+static void kill_urbs_in_qh_list(dwc_otg_hcd_t *hcd, struct list_head *qh_list)
-+{
-+ struct list_head *qh_item;
-+ dwc_otg_qh_t *qh;
-+ struct list_head *qtd_item;
-+ dwc_otg_qtd_t *qtd;
-+
-+ list_for_each(qh_item, qh_list) {
-+ qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry);
-+ for (qtd_item = qh->qtd_list.next;
-+ qtd_item != &qh->qtd_list;
-+ qtd_item = qh->qtd_list.next) {
-+ qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry);
-+ if (qtd->urb != NULL) {
-+ dwc_otg_hcd_complete_urb(hcd, qtd->urb,
-+ -ETIMEDOUT);
-+ }
-+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd);
-+ }
-+ }
-+}
-+
-+/**
-+ * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic
-+ * and periodic schedules. The QTD associated with each URB is removed from
-+ * the schedule and freed. This function may be called when a disconnect is
-+ * detected or when the HCD is being stopped.
-+ */
-+static void kill_all_urbs(dwc_otg_hcd_t *hcd)
-+{
-+ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive);
-+ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active);
-+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive);
-+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready);
-+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned);
-+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued);
-+}
-+
-+/**
-+ * HCD Callback function for disconnect of the HCD.
-+ *
-+ * @param p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_disconnect_cb(void *p)
-+{
-+ gintsts_data_t intr;
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
-+
-+ //DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
-+
-+ /*
-+ * Set status flags for the hub driver.
-+ */
-+ dwc_otg_hcd->flags.b.port_connect_status_change = 1;
-+ dwc_otg_hcd->flags.b.port_connect_status = 0;
-+
-+ /*
-+ * Shutdown any transfers in process by clearing the Tx FIFO Empty
-+ * interrupt mask and status bits and disabling subsequent host
-+ * channel interrupts.
-+ */
-+ intr.d32 = 0;
-+ intr.b.nptxfempty = 1;
-+ intr.b.ptxfempty = 1;
-+ intr.b.hcintr = 1;
-+ dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0);
-+ dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0);
-+
-+ del_timers(dwc_otg_hcd);
-+
-+ /*
-+ * Turn off the vbus power only if the core has transitioned to device
-+ * mode. If still in host mode, need to keep power on to detect a
-+ * reconnection.
-+ */
-+ if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
-+ if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {
-+ hprt0_data_t hprt0 = { .d32=0 };
-+ DWC_PRINT("Disconnect: PortPower off\n");
-+ hprt0.b.prtpwr = 0;
-+ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
-+ }
-+
-+ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
-+ }
-+
-+ /* Respond with an error status to all URBs in the schedule. */
-+ kill_all_urbs(dwc_otg_hcd);
-+
-+ if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
-+ /* Clean up any host channels that were in use. */
-+ int num_channels;
-+ int i;
-+ dwc_hc_t *channel;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ hcchar_data_t hcchar;
-+
-+ num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
-+
-+ if (!dwc_otg_hcd->core_if->dma_enable) {
-+ /* Flush out any channel requests in slave mode. */
-+ for (i = 0; i < num_channels; i++) {
-+ channel = dwc_otg_hcd->hc_ptr_array[i];
-+ if (list_empty(&channel->hc_list_entry)) {
-+ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ hcchar.b.chen = 0;
-+ hcchar.b.chdis = 1;
-+ hcchar.b.epdir = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ }
-+ }
-+ }
-+ }
-+
-+ for (i = 0; i < num_channels; i++) {
-+ channel = dwc_otg_hcd->hc_ptr_array[i];
-+ if (list_empty(&channel->hc_list_entry)) {
-+ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ /* Halt the channel. */
-+ hcchar.b.chdis = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ }
-+
-+ dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel);
-+ list_add_tail(&channel->hc_list_entry,
-+ &dwc_otg_hcd->free_hc_list);
-+ }
-+ }
-+ }
-+
-+ /* A disconnect will end the session so the B-Device is no
-+ * longer a B-host. */
-+ ((struct usb_hcd *)p)->self.is_b_host = 0;
-+ return 1;
-+}
-+
-+/**
-+ * Connection timeout function. An OTG host is required to display a
-+ * message if the device does not connect within 10 seconds.
-+ */
-+void dwc_otg_hcd_connect_timeout(unsigned long ptr)
-+{
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)ptr);
-+ DWC_PRINT("Connect Timeout\n");
-+ DWC_ERROR("Device Not Connected/Responding\n");
-+}
-+
-+/**
-+ * Start the connection timer. An OTG host is required to display a
-+ * message if the device does not connect within 10 seconds. The
-+ * timer is deleted if a port connect interrupt occurs before the
-+ * timer expires.
-+ */
-+static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t *hcd)
-+{
-+ init_timer(&hcd->conn_timer);
-+ hcd->conn_timer.function = dwc_otg_hcd_connect_timeout;
-+ hcd->conn_timer.data = 0;
-+ hcd->conn_timer.expires = jiffies + (HZ * 10);
-+ add_timer(&hcd->conn_timer);
-+}
-+
-+/**
-+ * HCD Callback function for disconnect of the HCD.
-+ *
-+ * @param p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_session_start_cb(void *p)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
-+ dwc_otg_hcd_start_connect_timer(dwc_otg_hcd);
-+ return 1;
-+}
-+
-+/**
-+ * HCD Callback structure for handling mode switching.
-+ */
-+static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
-+ .start = dwc_otg_hcd_start_cb,
-+ .stop = dwc_otg_hcd_stop_cb,
-+ .disconnect = dwc_otg_hcd_disconnect_cb,
-+ .session_start = dwc_otg_hcd_session_start_cb,
-+ .p = 0,
-+};
-+
-+/**
-+ * Reset tasklet function
-+ */
-+static void reset_tasklet_func(unsigned long data)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)data;
-+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-+ hprt0_data_t hprt0;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
-+
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtrst = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ mdelay(60);
-+
-+ hprt0.b.prtrst = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ dwc_otg_hcd->flags.b.port_reset_change = 1;
-+}
-+
-+static struct tasklet_struct reset_tasklet = {
-+ .next = NULL,
-+ .state = 0,
-+ .count = ATOMIC_INIT(0),
-+ .func = reset_tasklet_func,
-+ .data = 0,
-+};
-+
-+/**
-+ * Initializes the HCD. This function allocates memory for and initializes the
-+ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
-+ * USB bus with the core and calls the hc_driver->start() function. It returns
-+ * a negative error on failure.
-+ */
-+int dwc_otg_hcd_init(struct lm_device *lmdev)
-+{
-+ struct usb_hcd *hcd = NULL;
-+ dwc_otg_hcd_t *dwc_otg_hcd = NULL;
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lmdev);
-+
-+ int num_channels;
-+ int i;
-+ dwc_hc_t *channel;
-+
-+ int retval = 0;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n");
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ /* 2.6.20+ requires dev.dma_mask to be set prior to calling usb_create_hcd() */
-+
-+ /* Set device flags indicating whether the HCD supports DMA. */
-+ if (otg_dev->core_if->dma_enable) {
-+ DWC_PRINT("Using DMA mode\n");
-+#if 0
-+//090707: setting dma_mask would cause kernel to fetch 0xffffffff, result in crash, at scsi_calculate_bounce_limit
-+ lmdev->dev.dma_mask = (void *)~0;
-+ lmdev->dev.coherent_dma_mask = ~0;
-+#endif
-+
-+ if (otg_dev->core_if->dma_desc_enable) {
-+ DWC_PRINT("Device using Descriptor DMA mode\n");
-+ } else {
-+ DWC_PRINT("Device using Buffer DMA mode\n");
-+ }
-+ } else {
-+ DWC_PRINT("Using Slave mode\n");
-+ lmdev->dev.dma_mask = (void *)0;
-+ lmdev->dev.coherent_dma_mask = 0;
-+ }
-+#endif
-+ /*
-+ * Allocate memory for the base HCD plus the DWC OTG HCD.
-+ * Initialize the base HCD.
-+ */
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31)
-+ hcd = usb_create_hcd(&dwc_otg_hc_driver, &lmdev->dev, lmdev->dev.bus_id);
-+#else
-+ hcd = usb_create_hcd(&dwc_otg_hc_driver, &lmdev->dev, "gadget");
-+#endif
-+ if (!hcd) {
-+ retval = -ENOMEM;
-+ goto error1;
-+ }
-+
-+ hcd->regs = otg_dev->base;
-+ hcd->self.otg_port = 1;
-+
-+ /* Initialize the DWC OTG HCD. */
-+ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ dwc_otg_hcd->core_if = otg_dev->core_if;
-+ otg_dev->hcd = dwc_otg_hcd;
-+
-+ /* */
-+ spin_lock_init(&dwc_otg_hcd->lock);
-+
-+ /* Register the HCD CIL Callbacks */
-+ dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if,
-+ &hcd_cil_callbacks, hcd);
-+
-+ /* Initialize the non-periodic schedule. */
-+ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive);
-+ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active);
-+
-+ /* Initialize the periodic schedule. */
-+ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive);
-+ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready);
-+ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned);
-+ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued);
-+
-+ /*
-+ * Create a host channel descriptor for each host channel implemented
-+ * in the controller. Initialize the channel descriptor array.
-+ */
-+ INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list);
-+ num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
-+ memset(dwc_otg_hcd->hc_ptr_array, 0, sizeof(dwc_otg_hcd->hc_ptr_array));
-+ for (i = 0; i < num_channels; i++) {
-+ channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL);
-+ if (channel == NULL) {
-+ retval = -ENOMEM;
-+ DWC_ERROR("%s: host channel allocation failed\n", __func__);
-+ goto error2;
-+ }
-+ memset(channel, 0, sizeof(dwc_hc_t));
-+ channel->hc_num = i;
-+ dwc_otg_hcd->hc_ptr_array[i] = channel;
-+#ifdef DEBUG
-+ init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]);
-+#endif
-+ DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel);
-+ }
-+
-+ /* Initialize the Connection timeout timer. */
-+ init_timer(&dwc_otg_hcd->conn_timer);
-+
-+ /* Initialize reset tasklet. */
-+ reset_tasklet.data = (unsigned long) dwc_otg_hcd;
-+ dwc_otg_hcd->reset_tasklet = &reset_tasklet;
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ /* Set device flags indicating whether the HCD supports DMA. */
-+ if (otg_dev->core_if->dma_enable) {
-+ DWC_PRINT("Using DMA mode\n");
-+ lmdev->dev.dma_mask = (void *)~0;
-+ lmdev->dev.coherent_dma_mask = ~0;
-+
-+ if (otg_dev->core_if->dma_desc_enable){
-+ DWC_PRINT("Device using Descriptor DMA mode\n");
-+ } else {
-+ DWC_PRINT("Device using Buffer DMA mode\n");
-+ }
-+ } else {
-+ DWC_PRINT("Using Slave mode\n");
-+ lmdev->dev.dma_mask = (void *)0;
-+ lmdev->dev.coherent_dma_mask = 0;
-+ }
-+#endif
-+ /*
-+ * Finish generic HCD initialization and start the HCD. This function
-+ * allocates the DMA buffer pool, registers the USB bus, requests the
-+ * IRQ line, and calls dwc_otg_hcd_start method.
-+ */
-+ retval = usb_add_hcd(hcd, lmdev->irq, IRQF_SHARED);
-+ if (retval < 0) {
-+ goto error2;
-+ }
-+
-+ /*
-+ * Allocate space for storing data on status transactions. Normally no
-+ * data is sent, but this space acts as a bit bucket. This must be
-+ * done after usb_add_hcd since that function allocates the DMA buffer
-+ * pool.
-+ */
-+ if (otg_dev->core_if->dma_enable) {
-+ dwc_otg_hcd->status_buf =
-+ dma_alloc_coherent(&lmdev->dev,
-+ DWC_OTG_HCD_STATUS_BUF_SIZE,
-+ &dwc_otg_hcd->status_buf_dma,
-+ GFP_KERNEL | GFP_DMA);
-+ } else {
-+ dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE,
-+ GFP_KERNEL);
-+ }
-+ if (!dwc_otg_hcd->status_buf) {
-+ retval = -ENOMEM;
-+ DWC_ERROR("%s: status_buf allocation failed\n", __func__);
-+ goto error3;
-+ }
-+
-+ dwc_otg_hcd->otg_dev = otg_dev;
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31)
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n",
-+ lmdev->dev.bus_id, hcd->self.busnum);
-+#else
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, usbbus=%d\n",
-+ hcd->self.busnum);
-+#endif
-+ return 0;
-+
-+ /* Error conditions */
-+ error3:
-+ usb_remove_hcd(hcd);
-+ error2:
-+ dwc_otg_hcd_free(hcd);
-+ usb_put_hcd(hcd);
-+ error1:
-+ return retval;
-+}
-+
-+/**
-+ * Removes the HCD.
-+ * Frees memory and resources associated with the HCD and deregisters the bus.
-+ */
-+void dwc_otg_hcd_remove(struct lm_device *lmdev)
-+{
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lmdev);
-+ dwc_otg_hcd_t *dwc_otg_hcd;
-+ struct usb_hcd *hcd;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n");
-+
-+ if (!otg_dev) {
-+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
-+ return;
-+ }
-+
-+ dwc_otg_hcd = otg_dev->hcd;
-+
-+ if (!dwc_otg_hcd) {
-+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
-+ return;
-+ }
-+
-+ hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
-+
-+ if (!hcd) {
-+ DWC_DEBUGPL(DBG_ANY, "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", __func__);
-+ return;
-+ }
-+
-+ /* Turn off all interrupts */
-+ dwc_write_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0);
-+ dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0);
-+
-+ usb_remove_hcd(hcd);
-+ dwc_otg_hcd_free(hcd);
-+ usb_put_hcd(hcd);
-+}
-+
-+/* =========================================================================
-+ * Linux HC Driver Functions
-+ * ========================================================================= */
-+
-+/**
-+ * Initializes dynamic portions of the DWC_otg HCD state.
-+ */
-+static void hcd_reinit(dwc_otg_hcd_t *hcd)
-+{
-+ struct list_head *item;
-+ int num_channels;
-+ int i;
-+ dwc_hc_t *channel;
-+
-+ hcd->flags.d32 = 0;
-+
-+ hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active;
-+ hcd->non_periodic_channels = 0;
-+ hcd->periodic_channels = 0;
-+
-+ /*
-+ * Put all channels in the free channel list and clean up channel
-+ * states.
-+ */
-+ item = hcd->free_hc_list.next;
-+ while (item != &hcd->free_hc_list) {
-+ list_del(item);
-+ item = hcd->free_hc_list.next;
-+ }
-+ num_channels = hcd->core_if->core_params->host_channels;
-+ for (i = 0; i < num_channels; i++) {
-+ channel = hcd->hc_ptr_array[i];
-+ list_add_tail(&channel->hc_list_entry, &hcd->free_hc_list);
-+ dwc_otg_hc_cleanup(hcd->core_if, channel);
-+ }
-+
-+ /* Initialize the DWC core for host mode operation. */
-+ dwc_otg_core_host_init(hcd->core_if);
-+}
-+
-+/** Initializes the DWC_otg controller and its root hub and prepares it for host
-+ * mode operation. Activates the root port. Returns 0 on success and a negative
-+ * error code on failure. */
-+int dwc_otg_hcd_start(struct usb_hcd *hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-+ struct usb_bus *bus;
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ struct usb_device *udev;
-+ int retval;
-+#endif
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
-+
-+ bus = hcd_to_bus(hcd);
-+
-+ /* Initialize the bus state. If the core is in Device Mode
-+ * HALT the USB bus and return. */
-+ if (dwc_otg_is_device_mode(core_if)) {
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ hcd->state = HC_STATE_HALT;
-+#else
-+ hcd->state = HC_STATE_RUNNING;
-+#endif
-+ return 0;
-+ }
-+ hcd->state = HC_STATE_RUNNING;
-+
-+ /* Initialize and connect root hub if one is not already attached */
-+ if (bus->root_hub) {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
-+ /* Inform the HUB driver to resume. */
-+ usb_hcd_resume_root_hub(hcd);
-+ }
-+ else {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Does Not Have Root Hub\n");
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ udev = usb_alloc_dev(NULL, bus, 0);
-+ udev->speed = USB_SPEED_HIGH;
-+ if (!udev) {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
-+ return -ENODEV;
-+ }
-+ if ((retval = usb_hcd_register_root_hub(udev, hcd)) != 0) {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval);
-+ return -ENODEV;
-+ }
-+#endif
-+ }
-+
-+ hcd_reinit(dwc_otg_hcd);
-+
-+ return 0;
-+}
-+
-+static void qh_list_free(dwc_otg_hcd_t *hcd, struct list_head *qh_list)
-+{
-+ struct list_head *item;
-+ dwc_otg_qh_t *qh;
-+
-+ if (!qh_list->next) {
-+ /* The list hasn't been initialized yet. */
-+ return;
-+ }
-+
-+ /* Ensure there are no QTDs or URBs left. */
-+ kill_urbs_in_qh_list(hcd, qh_list);
-+
-+ for (item = qh_list->next; item != qh_list; item = qh_list->next) {
-+ qh = list_entry(item, dwc_otg_qh_t, qh_list_entry);
-+ dwc_otg_hcd_qh_remove_and_free(hcd, qh);
-+ }
-+}
-+
-+/**
-+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
-+ * stopped.
-+ */
-+void dwc_otg_hcd_stop(struct usb_hcd *hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ hprt0_data_t hprt0 = { .d32=0 };
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
-+
-+ /* Turn off all host-specific interrupts. */
-+ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
-+
-+ /*
-+ * The root hub should be disconnected before this function is called.
-+ * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
-+ * and the QH lists (via ..._hcd_endpoint_disable).
-+ */
-+
-+ /* Turn off the vbus power */
-+ DWC_PRINT("PortPower off\n");
-+ hprt0.b.prtpwr = 0;
-+ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
-+}
-+
-+/** Returns the current frame number. */
-+int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ hfnum_data_t hfnum;
-+
-+ hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->
-+ host_if->host_global_regs->hfnum);
-+
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum);
-+#endif
-+ return hfnum.b.frnum;
-+}
-+
-+/**
-+ * Frees secondary storage associated with the dwc_otg_hcd structure contained
-+ * in the struct usb_hcd field.
-+ */
-+void dwc_otg_hcd_free(struct usb_hcd *hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ int i;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
-+
-+ del_timers(dwc_otg_hcd);
-+
-+ /* Free memory for QH/QTD lists */
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
-+
-+ /* Free memory for the host channels. */
-+ for (i = 0; i < MAX_EPS_CHANNELS; i++) {
-+ dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
-+ if (hc != NULL) {
-+ DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc);
-+ kfree(hc);
-+ }
-+ }
-+
-+ if (dwc_otg_hcd->core_if->dma_enable) {
-+ if (dwc_otg_hcd->status_buf_dma) {
-+ dma_free_coherent(hcd->self.controller,
-+ DWC_OTG_HCD_STATUS_BUF_SIZE,
-+ dwc_otg_hcd->status_buf,
-+ dwc_otg_hcd->status_buf_dma);
-+ }
-+ } else if (dwc_otg_hcd->status_buf != NULL) {
-+ kfree(dwc_otg_hcd->status_buf);
-+ }
-+}
-+
-+#ifdef DEBUG
-+static void dump_urb_info(struct urb *urb, char* fn_name)
-+{
-+ DWC_PRINT("%s, urb %p\n", fn_name, urb);
-+ DWC_PRINT(" Device address: %d\n", usb_pipedevice(urb->pipe));
-+ DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
-+ (usb_pipein(urb->pipe) ? "IN" : "OUT"));
-+ DWC_PRINT(" Endpoint type: %s\n",
-+ ({char *pipetype;
-+ switch (usb_pipetype(urb->pipe)) {
-+ case PIPE_CONTROL: pipetype = "CONTROL"; break;
-+ case PIPE_BULK: pipetype = "BULK"; break;
-+ case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
-+ case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
-+ default: pipetype = "UNKNOWN"; break;
-+ }; pipetype;}));
-+ DWC_PRINT(" Speed: %s\n",
-+ ({char *speed;
-+ switch (urb->dev->speed) {
-+ case USB_SPEED_HIGH: speed = "HIGH"; break;
-+ case USB_SPEED_FULL: speed = "FULL"; break;
-+ case USB_SPEED_LOW: speed = "LOW"; break;
-+ default: speed = "UNKNOWN"; break;
-+ }; speed;}));
-+ DWC_PRINT(" Max packet size: %d\n",
-+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-+ DWC_PRINT(" Data buffer length: %d\n", urb->transfer_buffer_length);
-+ DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n",
-+ urb->transfer_buffer, (void *)urb->transfer_dma);
-+ DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n",
-+ urb->setup_packet, (void *)urb->setup_dma);
-+ DWC_PRINT(" Interval: %d\n", urb->interval);
-+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-+ int i;
-+ for (i = 0; i < urb->number_of_packets; i++) {
-+ DWC_PRINT(" ISO Desc %d:\n", i);
-+ DWC_PRINT(" offset: %d, length %d\n",
-+ urb->iso_frame_desc[i].offset,
-+ urb->iso_frame_desc[i].length);
-+ }
-+ }
-+}
-+
-+static void dump_channel_info(dwc_otg_hcd_t *hcd,
-+ dwc_otg_qh_t *qh)
-+{
-+ if (qh->channel != NULL) {
-+ dwc_hc_t *hc = qh->channel;
-+ struct list_head *item;
-+ dwc_otg_qh_t *qh_item;
-+ int num_channels = hcd->core_if->core_params->host_channels;
-+ int i;
-+
-+ dwc_otg_hc_regs_t *hc_regs;
-+ hcchar_data_t hcchar;
-+ hcsplt_data_t hcsplt;
-+ hctsiz_data_t hctsiz;
-+ uint32_t hcdma;
-+
-+ hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+ hcdma = dwc_read_reg32(&hc_regs->hcdma);
-+
-+ DWC_PRINT(" Assigned to channel %p:\n", hc);
-+ DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
-+ DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
-+ DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
-+ hc->dev_addr, hc->ep_num, hc->ep_is_in);
-+ DWC_PRINT(" ep_type: %d\n", hc->ep_type);
-+ DWC_PRINT(" max_packet: %d\n", hc->max_packet);
-+ DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start);
-+ DWC_PRINT(" xfer_started: %d\n", hc->xfer_started);
-+ DWC_PRINT(" halt_status: %d\n", hc->halt_status);
-+ DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff);
-+ DWC_PRINT(" xfer_len: %d\n", hc->xfer_len);
-+ DWC_PRINT(" qh: %p\n", hc->qh);
-+ DWC_PRINT(" NP inactive sched:\n");
-+ list_for_each(item, &hcd->non_periodic_sched_inactive) {
-+ qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
-+ DWC_PRINT(" %p\n", qh_item);
-+ }
-+ DWC_PRINT(" NP active sched:\n");
-+ list_for_each(item, &hcd->non_periodic_sched_active) {
-+ qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
-+ DWC_PRINT(" %p\n", qh_item);
-+ }
-+ DWC_PRINT(" Channels: \n");
-+ for (i = 0; i < num_channels; i++) {
-+ dwc_hc_t *hc = hcd->hc_ptr_array[i];
-+ DWC_PRINT(" %2d: %p\n", i, hc);
-+ }
-+ }
-+}
-+#endif
-+
-+
-+//OTG host require the DMA addr is DWORD-aligned,
-+//patch it if the buffer is not DWORD-aligned
-+inline
-+void hcd_check_and_patch_dma_addr(struct urb *urb){
-+
-+ if((!urb->transfer_buffer)||!urb->transfer_dma||urb->transfer_dma==0xffffffff)
-+ return;
-+
-+ if(((u32)urb->transfer_buffer)& 0x3){
-+ /*
-+ printk("%s: "
-+ "urb(%.8x) "
-+ "transfer_buffer=%.8x, "
-+ "transfer_dma=%.8x, "
-+ "transfer_buffer_length=%d, "
-+ "actual_length=%d(%x), "
-+ "\n",
-+ ((urb->transfer_flags & URB_DIR_MASK)==URB_DIR_OUT)?"OUT":"IN",
-+ urb,
-+ urb->transfer_buffer,
-+ urb->transfer_dma,
-+ urb->transfer_buffer_length,
-+ urb->actual_length,urb->actual_length
-+ );
-+ */
-+ if(!urb->aligned_transfer_buffer||urb->aligned_transfer_buffer_length<urb->transfer_buffer_length){
-+ urb->aligned_transfer_buffer_length=urb->transfer_buffer_length;
-+ if(urb->aligned_transfer_buffer) {
-+ kfree(urb->aligned_transfer_buffer);
-+ }
-+ urb->aligned_transfer_buffer=kmalloc(urb->aligned_transfer_buffer_length,GFP_KERNEL|GFP_DMA|GFP_ATOMIC);
-+ urb->aligned_transfer_dma=dma_map_single(NULL,(void *)(urb->aligned_transfer_buffer),(urb->aligned_transfer_buffer_length),DMA_FROM_DEVICE);
-+ if(!urb->aligned_transfer_buffer){
-+ DWC_ERROR("Cannot alloc required buffer!!\n");
-+ BUG();
-+ }
-+ //printk(" new allocated aligned_buf=%.8x aligned_buf_len=%d\n", (u32)urb->aligned_transfer_buffer, urb->aligned_transfer_buffer_length);
-+ }
-+ urb->transfer_dma=urb->aligned_transfer_dma;
-+ if((urb->transfer_flags & URB_DIR_MASK)==URB_DIR_OUT) {
-+ memcpy(urb->aligned_transfer_buffer,urb->transfer_buffer,urb->transfer_buffer_length);
-+ dma_sync_single_for_device(NULL,urb->transfer_dma,urb->transfer_buffer_length,DMA_TO_DEVICE);
-+ }
-+ }
-+}
-+
-+
-+
-+/** Starts processing a USB transfer request specified by a USB Request Block
-+ * (URB). mem_flags indicates the type of memory allocation to use while
-+ * processing this URB. */
-+int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
-+// struct usb_host_endpoint *ep,
-+ struct urb *urb,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ int mem_flags
-+#else
-+ gfp_t mem_flags
-+#endif
-+ )
-+{
-+ int retval = 0;
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ dwc_otg_qtd_t *qtd;
-+
-+#ifdef DEBUG
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ dump_urb_info(urb, "dwc_otg_hcd_urb_enqueue");
-+ }
-+#endif
-+ if (!dwc_otg_hcd->flags.b.port_connect_status) {
-+ /* No longer connected. */
-+ return -ENODEV;
-+ }
-+
-+ hcd_check_and_patch_dma_addr(urb);
-+ qtd = dwc_otg_hcd_qtd_create(urb);
-+ if (qtd == NULL) {
-+ DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
-+ return -ENOMEM;
-+ }
-+
-+ retval = dwc_otg_hcd_qtd_add(qtd, dwc_otg_hcd);
-+ if (retval < 0) {
-+ DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
-+ "Error status %d\n", retval);
-+ dwc_otg_hcd_qtd_free(qtd);
-+ }
-+
-+ return retval;
-+}
-+
-+/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
-+ * success. */
-+int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ struct usb_host_endpoint *ep,
-+#endif
-+ struct urb *urb, int status)
-+{
-+ unsigned long flags;
-+ dwc_otg_hcd_t *dwc_otg_hcd;
-+ dwc_otg_qtd_t *urb_qtd;
-+ dwc_otg_qh_t *qh;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
-+#endif
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
-+
-+ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+
-+ SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
-+
-+ urb_qtd = (dwc_otg_qtd_t *)urb->hcpriv;
-+ qh = (dwc_otg_qh_t *)ep->hcpriv;
-+
-+#ifdef DEBUG
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ dump_urb_info(urb, "dwc_otg_hcd_urb_dequeue");
-+ if (urb_qtd == qh->qtd_in_process) {
-+ dump_channel_info(dwc_otg_hcd, qh);
-+ }
-+ }
-+#endif
-+
-+ if (urb_qtd == qh->qtd_in_process) {
-+ /* The QTD is in process (it has been assigned to a channel). */
-+
-+ if (dwc_otg_hcd->flags.b.port_connect_status) {
-+ /*
-+ * If still connected (i.e. in host mode), halt the
-+ * channel so it can be used for other transfers. If
-+ * no longer connected, the host registers can't be
-+ * written to halt the channel since the core is in
-+ * device mode.
-+ */
-+ dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel,
-+ DWC_OTG_HC_XFER_URB_DEQUEUE);
-+ }
-+ }
-+
-+ /*
-+ * Free the QTD and clean up the associated QH. Leave the QH in the
-+ * schedule if it has any remaining QTDs.
-+ */
-+ dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd, urb_qtd);
-+ if (urb_qtd == qh->qtd_in_process) {
-+ dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0);
-+ qh->channel = NULL;
-+ qh->qtd_in_process = NULL;
-+ } else if (list_empty(&qh->qtd_list)) {
-+ dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh);
-+ }
-+
-+ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-+
-+ urb->hcpriv = NULL;
-+
-+ /* Higher layer software sets URB status. */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ usb_hcd_giveback_urb(hcd, urb, status);
-+#else
-+ usb_hcd_giveback_urb(hcd, urb, NULL);
-+#endif
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ DWC_PRINT("Called usb_hcd_giveback_urb()\n");
-+ DWC_PRINT(" urb->status = %d\n", urb->status);
-+ }
-+
-+ return 0;
-+}
-+
-+/** Frees resources in the DWC_otg controller related to a given endpoint. Also
-+ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
-+ * must already be dequeued. */
-+void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
-+ struct usb_host_endpoint *ep)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ dwc_otg_qh_t *qh;
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ unsigned long flags;
-+ int retry = 0;
-+#endif
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
-+ "endpoint=%d\n", ep->desc.bEndpointAddress,
-+ dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress));
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+rescan:
-+ SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
-+ qh = (dwc_otg_qh_t *)(ep->hcpriv);
-+ if (!qh)
-+ goto done;
-+
-+ /** Check that the QTD list is really empty */
-+ if (!list_empty(&qh->qtd_list)) {
-+ if (retry++ < 250) {
-+ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-+ schedule_timeout_uninterruptible(1);
-+ goto rescan;
-+ }
-+
-+ DWC_WARN("DWC OTG HCD EP DISABLE:"
-+ " QTD List for this endpoint is not empty\n");
-+ }
-+
-+ dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
-+ ep->hcpriv = NULL;
-+done:
-+ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-+
-+#else // LINUX_VERSION_CODE
-+
-+ qh = (dwc_otg_qh_t *)(ep->hcpriv);
-+ if (qh != NULL) {
-+#ifdef DEBUG
-+ /** Check that the QTD list is really empty */
-+ if (!list_empty(&qh->qtd_list)) {
-+ DWC_WARN("DWC OTG HCD EP DISABLE:"
-+ " QTD List for this endpoint is not empty\n");
-+ }
-+#endif
-+ dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
-+ ep->hcpriv = NULL;
-+ }
-+#endif // LINUX_VERSION_CODE
-+}
-+
-+/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
-+ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
-+ * interrupt.
-+ *
-+ * This function is called by the USB core when an interrupt occurs */
-+irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
-+ , struct pt_regs *regs
-+#endif
-+ )
-+{
-+ int retVal = 0;
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ retVal = dwc_otg_hcd_handle_intr(dwc_otg_hcd);
-+ if (dwc_otg_hcd->flags.b.port_connect_status_change == 1)
-+ usb_hcd_poll_rh_status(hcd);
-+ return IRQ_RETVAL(retVal);
-+}
-+
-+/** Creates Status Change bitmap for the root hub and root port. The bitmap is
-+ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
-+ * is the status change indicator for the single root port. Returns 1 if either
-+ * change indicator is 1, otherwise returns 0. */
-+int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, char *buf)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+
-+ buf[0] = 0;
-+ buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change ||
-+ dwc_otg_hcd->flags.b.port_reset_change ||
-+ dwc_otg_hcd->flags.b.port_enable_change ||
-+ dwc_otg_hcd->flags.b.port_suspend_change ||
-+ dwc_otg_hcd->flags.b.port_over_current_change) << 1;
-+
-+#ifdef DEBUG
-+ if (buf[0]) {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
-+ " Root port status changed\n");
-+ DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_connect_status_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_reset_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_enable_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_suspend_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_over_current_change);
-+ }
-+#endif
-+ return (buf[0] != 0);
-+}
-+
-+#ifdef DWC_HS_ELECT_TST
-+/*
-+ * Quick and dirty hack to implement the HS Electrical Test
-+ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
-+ *
-+ * This code was copied from our userspace app "hset". It sends a
-+ * Get Device Descriptor control sequence in two parts, first the
-+ * Setup packet by itself, followed some time later by the In and
-+ * Ack packets. Rather than trying to figure out how to add this
-+ * functionality to the normal driver code, we just hijack the
-+ * hardware, using these two function to drive the hardware
-+ * directly.
-+ */
-+
-+dwc_otg_core_global_regs_t *global_regs;
-+dwc_otg_host_global_regs_t *hc_global_regs;
-+dwc_otg_hc_regs_t *hc_regs;
-+uint32_t *data_fifo;
-+
-+static void do_setup(void)
-+{
-+ gintsts_data_t gintsts;
-+ hctsiz_data_t hctsiz;
-+ hcchar_data_t hcchar;
-+ haint_data_t haint;
-+ hcint_data_t hcint;
-+
-+ /* Enable HAINTs */
-+ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
-+
-+ /* Enable HCINTs */
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /*
-+ * Send Setup packet (Get Device Descriptor)
-+ */
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
-+ hcchar.b.chdis = 1;
-+// hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ mdelay(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //if (hcchar.b.chen) {
-+ // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
-+ //}
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 8;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-+ hcchar.b.epdir = 0;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ /* Fill FIFO with Setup data for Get Device Descriptor */
-+ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-+ dwc_write_reg32(data_fifo++, 0x01000680);
-+ dwc_write_reg32(data_fifo++, 0x00080000);
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Disable HCINTs */
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
-+
-+ /* Disable HAINTs */
-+ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+}
-+
-+static void do_in_ack(void)
-+{
-+ gintsts_data_t gintsts;
-+ hctsiz_data_t hctsiz;
-+ hcchar_data_t hcchar;
-+ haint_data_t haint;
-+ hcint_data_t hcint;
-+ host_grxsts_data_t grxsts;
-+
-+ /* Enable HAINTs */
-+ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
-+
-+ /* Enable HCINTs */
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /*
-+ * Receive Control In packet
-+ */
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
-+ hcchar.b.chdis = 1;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ mdelay(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //if (hcchar.b.chen) {
-+ // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
-+ //}
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 8;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-+ hcchar.b.epdir = 1;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for receive status queue interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.rxstsqlvl == 0);
-+
-+ //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Read RXSTS */
-+ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
-+ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-+
-+ /* Clear RXSTSQLVL in GINTSTS */
-+ gintsts.d32 = 0;
-+ gintsts.b.rxstsqlvl = 1;
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ switch (grxsts.b.pktsts) {
-+ case DWC_GRXSTS_PKTSTS_IN:
-+ /* Read the data into the host buffer */
-+ if (grxsts.b.bcnt > 0) {
-+ int i;
-+ int word_count = (grxsts.b.bcnt + 3) / 4;
-+
-+ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-+
-+ for (i = 0; i < word_count; i++) {
-+ (void)dwc_read_reg32(data_fifo++);
-+ }
-+ }
-+
-+ //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt);
-+ break;
-+
-+ default:
-+ //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
-+ break;
-+ }
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for receive status queue interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.rxstsqlvl == 0);
-+
-+ //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Read RXSTS */
-+ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
-+ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-+
-+ /* Clear RXSTSQLVL in GINTSTS */
-+ gintsts.d32 = 0;
-+ gintsts.b.rxstsqlvl = 1;
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ switch (grxsts.b.pktsts) {
-+ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
-+ break;
-+
-+ default:
-+ //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
-+ break;
-+ }
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+// usleep(100000);
-+// mdelay(100);
-+ mdelay(1);
-+
-+ /*
-+ * Send handshake packet
-+ */
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
-+ hcchar.b.chdis = 1;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ mdelay(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //if (hcchar.b.chen) {
-+ // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
-+ //}
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 0;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-+ hcchar.b.epdir = 0;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Disable HCINTs */
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
-+
-+ /* Disable HAINTs */
-+ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+}
-+#endif /* DWC_HS_ELECT_TST */
-+
-+/** Handles hub class-specific requests. */
-+int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
-+ u16 typeReq,
-+ u16 wValue,
-+ u16 wIndex,
-+ char *buf,
-+ u16 wLength)
-+{
-+ int retval = 0;
-+
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd(hcd)->core_if;
-+ struct usb_hub_descriptor *desc;
-+ hprt0_data_t hprt0 = {.d32 = 0};
-+
-+ uint32_t port_status;
-+
-+ switch (typeReq) {
-+ case ClearHubFeature:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearHubFeature 0x%x\n", wValue);
-+ switch (wValue) {
-+ case C_HUB_LOCAL_POWER:
-+ case C_HUB_OVER_CURRENT:
-+ /* Nothing required here */
-+ break;
-+ default:
-+ retval = -EINVAL;
-+ DWC_ERROR("DWC OTG HCD - "
-+ "ClearHubFeature request %xh unknown\n", wValue);
-+ }
-+ break;
-+ case ClearPortFeature:
-+ if (!wIndex || wIndex > 1)
-+ goto error;
-+
-+ switch (wValue) {
-+ case USB_PORT_FEAT_ENABLE:
-+ DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtena = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_SUSPEND:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtres = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ /* Clear Resume bit */
-+ mdelay(100);
-+ hprt0.b.prtres = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_POWER:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_POWER\n");
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtpwr = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_INDICATOR:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
-+ /* Port inidicator not supported */
-+ break;
-+ case USB_PORT_FEAT_C_CONNECTION:
-+ /* Clears drivers internal connect status change
-+ * flag */
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
-+ dwc_otg_hcd->flags.b.port_connect_status_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_RESET:
-+ /* Clears the driver's internal Port Reset Change
-+ * flag */
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
-+ dwc_otg_hcd->flags.b.port_reset_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_ENABLE:
-+ /* Clears the driver's internal Port
-+ * Enable/Disable Change flag */
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
-+ dwc_otg_hcd->flags.b.port_enable_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_SUSPEND:
-+ /* Clears the driver's internal Port Suspend
-+ * Change flag, which is set when resume signaling on
-+ * the host port is complete */
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
-+ dwc_otg_hcd->flags.b.port_suspend_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_OVER_CURRENT:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
-+ dwc_otg_hcd->flags.b.port_over_current_change = 0;
-+ break;
-+ default:
-+ retval = -EINVAL;
-+ DWC_ERROR("DWC OTG HCD - "
-+ "ClearPortFeature request %xh "
-+ "unknown or unsupported\n", wValue);
-+ }
-+ break;
-+ case GetHubDescriptor:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "GetHubDescriptor\n");
-+ desc = (struct usb_hub_descriptor *)buf;
-+ desc->bDescLength = 9;
-+ desc->bDescriptorType = 0x29;
-+ desc->bNbrPorts = 1;
-+ desc->wHubCharacteristics = 0x08;
-+ desc->bPwrOn2PwrGood = 1;
-+ desc->bHubContrCurrent = 0;
-+ desc->bitmap[0] = 0;
-+ desc->bitmap[1] = 0xff;
-+ break;
-+ case GetHubStatus:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "GetHubStatus\n");
-+ memset(buf, 0, 4);
-+ break;
-+ case GetPortStatus:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "GetPortStatus\n");
-+
-+ if (!wIndex || wIndex > 1)
-+ goto error;
-+
-+ port_status = 0;
-+
-+ if (dwc_otg_hcd->flags.b.port_connect_status_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
-+
-+ if (dwc_otg_hcd->flags.b.port_enable_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
-+
-+ if (dwc_otg_hcd->flags.b.port_suspend_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
-+
-+ if (dwc_otg_hcd->flags.b.port_reset_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_RESET);
-+
-+ if (dwc_otg_hcd->flags.b.port_over_current_change) {
-+ DWC_ERROR("Device Not Supported\n");
-+ port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
-+ }
-+
-+ if (!dwc_otg_hcd->flags.b.port_connect_status) {
-+ /*
-+ * The port is disconnected, which means the core is
-+ * either in device mode or it soon will be. Just
-+ * return 0's for the remainder of the port status
-+ * since the port register can't be read if the core
-+ * is in device mode.
-+ */
-+ *((__le32 *) buf) = cpu_to_le32(port_status);
-+ break;
-+ }
-+
-+ hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0);
-+ DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32);
-+
-+ if (hprt0.b.prtconnsts)
-+ port_status |= (1 << USB_PORT_FEAT_CONNECTION);
-+
-+ if (hprt0.b.prtena)
-+ port_status |= (1 << USB_PORT_FEAT_ENABLE);
-+
-+ if (hprt0.b.prtsusp)
-+ port_status |= (1 << USB_PORT_FEAT_SUSPEND);
-+
-+ if (hprt0.b.prtovrcurract)
-+ port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
-+
-+ if (hprt0.b.prtrst)
-+ port_status |= (1 << USB_PORT_FEAT_RESET);
-+
-+ if (hprt0.b.prtpwr)
-+ port_status |= (1 << USB_PORT_FEAT_POWER);
-+
-+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
-+ port_status |= (1 << USB_PORT_FEAT_HIGHSPEED);
-+ else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
-+ port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
-+
-+ if (hprt0.b.prttstctl)
-+ port_status |= (1 << USB_PORT_FEAT_TEST);
-+
-+ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */
-+
-+ *((__le32 *) buf) = cpu_to_le32(port_status);
-+
-+ break;
-+ case SetHubFeature:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetHubFeature\n");
-+ /* No HUB features supported */
-+ break;
-+ case SetPortFeature:
-+ if (wValue != USB_PORT_FEAT_TEST && (!wIndex || wIndex > 1))
-+ goto error;
-+
-+ if (!dwc_otg_hcd->flags.b.port_connect_status) {
-+ /*
-+ * The port is disconnected, which means the core is
-+ * either in device mode or it soon will be. Just
-+ * return without doing anything since the port
-+ * register can't be written if the core is in device
-+ * mode.
-+ */
-+ break;
-+ }
-+
-+ switch (wValue) {
-+ case USB_PORT_FEAT_SUSPEND:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
-+ if (hcd->self.otg_port == wIndex &&
-+ hcd->self.b_hnp_enable) {
-+ gotgctl_data_t gotgctl = {.d32=0};
-+ gotgctl.b.hstsethnpen = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
-+ 0, gotgctl.d32);
-+ core_if->op_state = A_SUSPEND;
-+ }
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtsusp = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ //DWC_PRINT("SUSPEND: HPRT0=%0x\n", hprt0.d32);
-+ /* Suspend the Phy Clock */
-+ {
-+ pcgcctl_data_t pcgcctl = {.d32=0};
-+ pcgcctl.b.stoppclk = 1;
-+ dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32);
-+ }
-+
-+ /* For HNP the bus must be suspended for at least 200ms. */
-+ if (hcd->self.b_hnp_enable) {
-+ mdelay(200);
-+ //DWC_PRINT("SUSPEND: wait complete! (%d)\n", _hcd->state);
-+ }
-+ break;
-+ case USB_PORT_FEAT_POWER:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_POWER\n");
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtpwr = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_RESET:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_RESET\n");
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ /* When B-Host the Port reset bit is set in
-+ * the Start HCD Callback function, so that
-+ * the reset is started within 1ms of the HNP
-+ * success interrupt. */
-+ if (!hcd->self.is_b_host) {
-+ hprt0.b.prtrst = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ }
-+ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
-+ MDELAY(60);
-+ hprt0.b.prtrst = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+
-+#ifdef DWC_HS_ELECT_TST
-+ case USB_PORT_FEAT_TEST:
-+ {
-+ uint32_t t;
-+ gintmsk_data_t gintmsk;
-+
-+ t = (wIndex >> 8); /* MSB wIndex USB */
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
-+ warn("USB_PORT_FEAT_TEST %d\n", t);
-+ if (t < 6) {
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prttstctl = t;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ } else {
-+ /* Setup global vars with reg addresses (quick and
-+ * dirty hack, should be cleaned up)
-+ */
-+ global_regs = core_if->core_global_regs;
-+ hc_global_regs = core_if->host_if->host_global_regs;
-+ hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500);
-+ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-+
-+ if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */
-+ /* Save current interrupt mask */
-+ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ dwc_write_reg32(&global_regs->gintmsk, 0);
-+
-+ /* 15 second delay per the test spec */
-+ mdelay(15000);
-+
-+ /* Drive suspend on the root port */
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtsusp = 1;
-+ hprt0.b.prtres = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ /* 15 second delay per the test spec */
-+ mdelay(15000);
-+
-+ /* Drive resume on the root port */
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtsusp = 0;
-+ hprt0.b.prtres = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ mdelay(100);
-+
-+ /* Clear the resume bit */
-+ hprt0.b.prtres = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ /* Restore interrupts */
-+ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
-+ } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
-+ /* Save current interrupt mask */
-+ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ dwc_write_reg32(&global_regs->gintmsk, 0);
-+
-+ /* 15 second delay per the test spec */
-+ mdelay(15000);
-+
-+ /* Send the Setup packet */
-+ do_setup();
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ mdelay(15000);
-+
-+ /* Restore interrupts */
-+ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
-+ } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
-+ /* Save current interrupt mask */
-+ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ dwc_write_reg32(&global_regs->gintmsk, 0);
-+
-+ /* Send the Setup packet */
-+ do_setup();
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ mdelay(15000);
-+
-+ /* Send the In and Ack packets */
-+ do_in_ack();
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ mdelay(15000);
-+
-+ /* Restore interrupts */
-+ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
-+ }
-+ }
-+ break;
-+ }
-+#endif /* DWC_HS_ELECT_TST */
-+
-+ case USB_PORT_FEAT_INDICATOR:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
-+ /* Not supported */
-+ break;
-+ default:
-+ retval = -EINVAL;
-+ DWC_ERROR("DWC OTG HCD - "
-+ "SetPortFeature request %xh "
-+ "unknown or unsupported\n", wValue);
-+ break;
-+ }
-+ break;
-+ default:
-+ error:
-+ retval = -EINVAL;
-+ DWC_WARN("DWC OTG HCD - "
-+ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
-+ typeReq, wIndex, wValue);
-+ break;
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * Assigns transactions from a QTD to a free host channel and initializes the
-+ * host channel to perform the transactions. The host channel is removed from
-+ * the free list.
-+ *
-+ * @param hcd The HCD state structure.
-+ * @param qh Transactions from the first QTD for this QH are selected and
-+ * assigned to a free host channel.
-+ */
-+static void assign_and_init_hc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ dwc_hc_t *hc;
-+ dwc_otg_qtd_t *qtd;
-+ struct urb *urb;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, hcd, qh);
-+
-+ hc = list_entry(hcd->free_hc_list.next, dwc_hc_t, hc_list_entry);
-+
-+ /* Remove the host channel from the free list. */
-+ list_del_init(&hc->hc_list_entry);
-+
-+ qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-+ urb = qtd->urb;
-+ qh->channel = hc;
-+ qh->qtd_in_process = qtd;
-+
-+ /*
-+ * Use usb_pipedevice to determine device address. This address is
-+ * 0 before the SET_ADDRESS command and the correct address afterward.
-+ */
-+ hc->dev_addr = usb_pipedevice(urb->pipe);
-+ hc->ep_num = usb_pipeendpoint(urb->pipe);
-+
-+ if (urb->dev->speed == USB_SPEED_LOW) {
-+ hc->speed = DWC_OTG_EP_SPEED_LOW;
-+ } else if (urb->dev->speed == USB_SPEED_FULL) {
-+ hc->speed = DWC_OTG_EP_SPEED_FULL;
-+ } else {
-+ hc->speed = DWC_OTG_EP_SPEED_HIGH;
-+ }
-+
-+ hc->max_packet = dwc_max_packet(qh->maxp);
-+
-+ hc->xfer_started = 0;
-+ hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
-+ hc->error_state = (qtd->error_count > 0);
-+ hc->halt_on_queue = 0;
-+ hc->halt_pending = 0;
-+ hc->requests = 0;
-+
-+ /*
-+ * The following values may be modified in the transfer type section
-+ * below. The xfer_len value may be reduced when the transfer is
-+ * started to accommodate the max widths of the XferSize and PktCnt
-+ * fields in the HCTSIZn register.
-+ */
-+ hc->do_ping = qh->ping_state;
-+ hc->ep_is_in = (usb_pipein(urb->pipe) != 0);
-+ hc->data_pid_start = qh->data_toggle;
-+ hc->multi_count = 1;
-+
-+ if (hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *)urb->transfer_dma + urb->actual_length;
-+ } else {
-+ hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length;
-+ }
-+ hc->xfer_len = urb->transfer_buffer_length - urb->actual_length;
-+ hc->xfer_count = 0;
-+
-+ /*
-+ * Set the split attributes
-+ */
-+ hc->do_split = 0;
-+ if (qh->do_split) {
-+ hc->do_split = 1;
-+ hc->xact_pos = qtd->isoc_split_pos;
-+ hc->complete_split = qtd->complete_split;
-+ hc->hub_addr = urb->dev->tt->hub->devnum;
-+ hc->port_addr = urb->dev->ttport;
-+ }
-+
-+ switch (usb_pipetype(urb->pipe)) {
-+ case PIPE_CONTROL:
-+ hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
-+ switch (qtd->control_phase) {
-+ case DWC_OTG_CONTROL_SETUP:
-+ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n");
-+ hc->do_ping = 0;
-+ hc->ep_is_in = 0;
-+ hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
-+ if (hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *)urb->setup_dma;
-+ } else {
-+ hc->xfer_buff = (uint8_t *)urb->setup_packet;
-+ }
-+ hc->xfer_len = 8;
-+ break;
-+ case DWC_OTG_CONTROL_DATA:
-+ DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n");
-+ hc->data_pid_start = qtd->data_toggle;
-+ break;
-+ case DWC_OTG_CONTROL_STATUS:
-+ /*
-+ * Direction is opposite of data direction or IN if no
-+ * data.
-+ */
-+ DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n");
-+ if (urb->transfer_buffer_length == 0) {
-+ hc->ep_is_in = 1;
-+ } else {
-+ hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN);
-+ }
-+ if (hc->ep_is_in) {
-+ hc->do_ping = 0;
-+ }
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
-+ hc->xfer_len = 0;
-+ if (hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *)hcd->status_buf_dma;
-+ } else {
-+ hc->xfer_buff = (uint8_t *)hcd->status_buf;
-+ }
-+ break;
-+ }
-+ break;
-+ case PIPE_BULK:
-+ hc->ep_type = DWC_OTG_EP_TYPE_BULK;
-+ break;
-+ case PIPE_INTERRUPT:
-+ hc->ep_type = DWC_OTG_EP_TYPE_INTR;
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ {
-+ struct usb_iso_packet_descriptor *frame_desc;
-+ frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
-+ hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
-+ if (hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *)urb->transfer_dma;
-+ } else {
-+ hc->xfer_buff = (uint8_t *)urb->transfer_buffer;
-+ }
-+ hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset;
-+ hc->xfer_len = frame_desc->length - qtd->isoc_split_offset;
-+
-+ if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
-+ if (hc->xfer_len <= 188) {
-+ hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
-+ }
-+ else {
-+ hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN;
-+ }
-+ }
-+ }
-+ break;
-+ }
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * This value may be modified when the transfer is started to
-+ * reflect the actual transfer length.
-+ */
-+ hc->multi_count = dwc_hb_mult(qh->maxp);
-+ }
-+
-+ dwc_otg_hc_init(hcd->core_if, hc);
-+ hc->qh = qh;
-+}
-+
-+/**
-+ * This function selects transactions from the HCD transfer schedule and
-+ * assigns them to available host channels. It is called from HCD interrupt
-+ * handler functions.
-+ *
-+ * @param hcd The HCD state structure.
-+ *
-+ * @return The types of new transactions that were assigned to host channels.
-+ */
-+dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd)
-+{
-+ struct list_head *qh_ptr;
-+ dwc_otg_qh_t *qh;
-+ int num_channels;
-+ dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE;
-+
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCD, " Select Transactions\n");
-+#endif
-+
-+ /* Process entries in the periodic ready list. */
-+ qh_ptr = hcd->periodic_sched_ready.next;
-+ while (qh_ptr != &hcd->periodic_sched_ready &&
-+ !list_empty(&hcd->free_hc_list)) {
-+
-+ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+ assign_and_init_hc(hcd, qh);
-+
-+ /*
-+ * Move the QH from the periodic ready schedule to the
-+ * periodic assigned schedule.
-+ */
-+ qh_ptr = qh_ptr->next;
-+ list_move(&qh->qh_list_entry, &hcd->periodic_sched_assigned);
-+
-+ ret_val = DWC_OTG_TRANSACTION_PERIODIC;
-+ }
-+
-+ /*
-+ * Process entries in the inactive portion of the non-periodic
-+ * schedule. Some free host channels may not be used if they are
-+ * reserved for periodic transfers.
-+ */
-+ qh_ptr = hcd->non_periodic_sched_inactive.next;
-+ num_channels = hcd->core_if->core_params->host_channels;
-+ while (qh_ptr != &hcd->non_periodic_sched_inactive &&
-+ (hcd->non_periodic_channels <
-+ num_channels - hcd->periodic_channels) &&
-+ !list_empty(&hcd->free_hc_list)) {
-+
-+ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+ assign_and_init_hc(hcd, qh);
-+
-+ /*
-+ * Move the QH from the non-periodic inactive schedule to the
-+ * non-periodic active schedule.
-+ */
-+ qh_ptr = qh_ptr->next;
-+ list_move(&qh->qh_list_entry, &hcd->non_periodic_sched_active);
-+
-+ if (ret_val == DWC_OTG_TRANSACTION_NONE) {
-+ ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC;
-+ } else {
-+ ret_val = DWC_OTG_TRANSACTION_ALL;
-+ }
-+
-+ hcd->non_periodic_channels++;
-+ }
-+
-+ return ret_val;
-+}
-+
-+/**
-+ * Attempts to queue a single transaction request for a host channel
-+ * associated with either a periodic or non-periodic transfer. This function
-+ * assumes that there is space available in the appropriate request queue. For
-+ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
-+ * is available in the appropriate Tx FIFO.
-+ *
-+ * @param hcd The HCD state structure.
-+ * @param hc Host channel descriptor associated with either a periodic or
-+ * non-periodic transfer.
-+ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx
-+ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
-+ * transfers.
-+ *
-+ * @return 1 if a request is queued and more requests may be needed to
-+ * complete the transfer, 0 if no more requests are required for this
-+ * transfer, -1 if there is insufficient space in the Tx FIFO.
-+ */
-+static int queue_transaction(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ uint16_t fifo_dwords_avail)
-+{
-+ int retval;
-+
-+ if (hcd->core_if->dma_enable) {
-+ if (!hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(hcd->core_if, hc);
-+ hc->qh->ping_state = 0;
-+ }
-+ retval = 0;
-+ } else if (hc->halt_pending) {
-+ /* Don't queue a request if the channel has been halted. */
-+ retval = 0;
-+ } else if (hc->halt_on_queue) {
-+ dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status);
-+ retval = 0;
-+ } else if (hc->do_ping) {
-+ if (!hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(hcd->core_if, hc);
-+ }
-+ retval = 0;
-+ } else if (!hc->ep_is_in ||
-+ hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
-+ if ((fifo_dwords_avail * 4) >= hc->max_packet) {
-+ if (!hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(hcd->core_if, hc);
-+ retval = 1;
-+ } else {
-+ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
-+ }
-+ } else {
-+ retval = -1;
-+ }
-+ } else {
-+ if (!hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(hcd->core_if, hc);
-+ retval = 1;
-+ } else {
-+ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
-+ }
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * Processes active non-periodic channels and queues transactions for these
-+ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
-+ * FIFO Empty interrupt is enabled if there are more transactions to queue as
-+ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
-+ * FIFO Empty interrupt is disabled.
-+ */
-+static void process_non_periodic_channels(dwc_otg_hcd_t *hcd)
-+{
-+ gnptxsts_data_t tx_status;
-+ struct list_head *orig_qh_ptr;
-+ dwc_otg_qh_t *qh;
-+ int status;
-+ int no_queue_space = 0;
-+ int no_fifo_space = 0;
-+ int more_to_do = 0;
-+
-+ dwc_otg_core_global_regs_t *global_regs = hcd->core_if->core_global_regs;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
-+#ifdef DEBUG
-+ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (before queue): %d\n",
-+ tx_status.b.nptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n",
-+ tx_status.b.nptxfspcavail);
-+#endif
-+ /*
-+ * Keep track of the starting point. Skip over the start-of-list
-+ * entry.
-+ */
-+ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
-+ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
-+ }
-+ orig_qh_ptr = hcd->non_periodic_qh_ptr;
-+
-+ /*
-+ * Process once through the active list or until no more space is
-+ * available in the request queue or the Tx FIFO.
-+ */
-+ do {
-+ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
-+ no_queue_space = 1;
-+ break;
-+ }
-+
-+ qh = list_entry(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+ status = queue_transaction(hcd, qh->channel, tx_status.b.nptxfspcavail);
-+
-+ if (status > 0) {
-+ more_to_do = 1;
-+ } else if (status < 0) {
-+ no_fifo_space = 1;
-+ break;
-+ }
-+
-+ /* Advance to next QH, skipping start-of-list entry. */
-+ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
-+ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
-+ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
-+ }
-+
-+ } while (hcd->non_periodic_qh_ptr != orig_qh_ptr);
-+
-+ if (!hcd->core_if->dma_enable) {
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+ intr_mask.b.nptxfempty = 1;
-+
-+#ifdef DEBUG
-+ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (after queue): %d\n",
-+ tx_status.b.nptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (after queue): %d\n",
-+ tx_status.b.nptxfspcavail);
-+#endif
-+ if (more_to_do || no_queue_space || no_fifo_space) {
-+ /*
-+ * May need to queue more transactions as the request
-+ * queue or Tx FIFO empties. Enable the non-periodic
-+ * Tx FIFO empty interrupt. (Always use the half-empty
-+ * level to ensure that new requests are loaded as
-+ * soon as possible.)
-+ */
-+ dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
-+ } else {
-+ /*
-+ * Disable the Tx FIFO empty interrupt since there are
-+ * no more transactions that need to be queued right
-+ * now. This function is called from interrupt
-+ * handlers to queue more transactions as transfer
-+ * states change.
-+ */
-+ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
-+ }
-+ }
-+}
-+
-+/**
-+ * Processes periodic channels for the next frame and queues transactions for
-+ * these channels to the DWC_otg controller. After queueing transactions, the
-+ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
-+ * to queue as Periodic Tx FIFO or request queue space becomes available.
-+ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
-+ */
-+static void process_periodic_channels(dwc_otg_hcd_t *hcd)
-+{
-+ hptxsts_data_t tx_status;
-+ struct list_head *qh_ptr;
-+ dwc_otg_qh_t *qh;
-+ int status;
-+ int no_queue_space = 0;
-+ int no_fifo_space = 0;
-+
-+ dwc_otg_host_global_regs_t *host_regs;
-+ host_regs = hcd->core_if->host_if->host_global_regs;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
-+#ifdef DEBUG
-+ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
-+ DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (before queue): %d\n",
-+ tx_status.b.ptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n",
-+ tx_status.b.ptxfspcavail);
-+#endif
-+
-+ qh_ptr = hcd->periodic_sched_assigned.next;
-+ while (qh_ptr != &hcd->periodic_sched_assigned) {
-+ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
-+ if (tx_status.b.ptxqspcavail == 0) {
-+ no_queue_space = 1;
-+ break;
-+ }
-+
-+ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+
-+ /*
-+ * Set a flag if we're queuing high-bandwidth in slave mode.
-+ * The flag prevents any halts to get into the request queue in
-+ * the middle of multiple high-bandwidth packets getting queued.
-+ */
-+ if (!hcd->core_if->dma_enable &&
-+ qh->channel->multi_count > 1)
-+ {
-+ hcd->core_if->queuing_high_bandwidth = 1;
-+ }
-+
-+ status = queue_transaction(hcd, qh->channel, tx_status.b.ptxfspcavail);
-+ if (status < 0) {
-+ no_fifo_space = 1;
-+ break;
-+ }
-+
-+ /*
-+ * In Slave mode, stay on the current transfer until there is
-+ * nothing more to do or the high-bandwidth request count is
-+ * reached. In DMA mode, only need to queue one request. The
-+ * controller automatically handles multiple packets for
-+ * high-bandwidth transfers.
-+ */
-+ if (hcd->core_if->dma_enable || status == 0 ||
-+ qh->channel->requests == qh->channel->multi_count) {
-+ qh_ptr = qh_ptr->next;
-+ /*
-+ * Move the QH from the periodic assigned schedule to
-+ * the periodic queued schedule.
-+ */
-+ list_move(&qh->qh_list_entry, &hcd->periodic_sched_queued);
-+
-+ /* done queuing high bandwidth */
-+ hcd->core_if->queuing_high_bandwidth = 0;
-+ }
-+ }
-+
-+ if (!hcd->core_if->dma_enable) {
-+ dwc_otg_core_global_regs_t *global_regs;
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+
-+ global_regs = hcd->core_if->core_global_regs;
-+ intr_mask.b.ptxfempty = 1;
-+#ifdef DEBUG
-+ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
-+ DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (after queue): %d\n",
-+ tx_status.b.ptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (after queue): %d\n",
-+ tx_status.b.ptxfspcavail);
-+#endif
-+ if (!list_empty(&hcd->periodic_sched_assigned) ||
-+ no_queue_space || no_fifo_space) {
-+ /*
-+ * May need to queue more transactions as the request
-+ * queue or Tx FIFO empties. Enable the periodic Tx
-+ * FIFO empty interrupt. (Always use the half-empty
-+ * level to ensure that new requests are loaded as
-+ * soon as possible.)
-+ */
-+ dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
-+ } else {
-+ /*
-+ * Disable the Tx FIFO empty interrupt since there are
-+ * no more transactions that need to be queued right
-+ * now. This function is called from interrupt
-+ * handlers to queue more transactions as transfer
-+ * states change.
-+ */
-+ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
-+ }
-+ }
-+}
-+
-+/**
-+ * This function processes the currently active host channels and queues
-+ * transactions for these channels to the DWC_otg controller. It is called
-+ * from HCD interrupt handler functions.
-+ *
-+ * @param hcd The HCD state structure.
-+ * @param tr_type The type(s) of transactions to queue (non-periodic,
-+ * periodic, or both).
-+ */
-+void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd,
-+ dwc_otg_transaction_type_e tr_type)
-+{
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
-+#endif
-+ /* Process host channels associated with periodic transfers. */
-+ if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
-+ tr_type == DWC_OTG_TRANSACTION_ALL) &&
-+ !list_empty(&hcd->periodic_sched_assigned)) {
-+
-+ process_periodic_channels(hcd);
-+ }
-+
-+ /* Process host channels associated with non-periodic transfers. */
-+ if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
-+ tr_type == DWC_OTG_TRANSACTION_ALL) {
-+ if (!list_empty(&hcd->non_periodic_sched_active)) {
-+ process_non_periodic_channels(hcd);
-+ } else {
-+ /*
-+ * Ensure NP Tx FIFO empty interrupt is disabled when
-+ * there are no non-periodic transfers to process.
-+ */
-+ gintmsk_data_t gintmsk = {.d32 = 0};
-+ gintmsk.b.nptxfempty = 1;
-+ dwc_modify_reg32(&hcd->core_if->core_global_regs->gintmsk,
-+ gintmsk.d32, 0);
-+ }
-+ }
-+}
-+
-+/**
-+ * Sets the final status of an URB and returns it to the device driver. Any
-+ * required cleanup of the URB is performed.
-+ */
-+void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *hcd, struct urb *urb, int status)
-+{
-+#ifdef DEBUG
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n",
-+ __func__, urb, usb_pipedevice(urb->pipe),
-+ usb_pipeendpoint(urb->pipe),
-+ usb_pipein(urb->pipe) ? "IN" : "OUT", status);
-+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-+ int i;
-+ for (i = 0; i < urb->number_of_packets; i++) {
-+ DWC_PRINT(" ISO Desc %d status: %d\n",
-+ i, urb->iso_frame_desc[i].status);
-+ }
-+ }
-+ }
-+#endif
-+
-+ //if we use the aligned buffer instead of the original unaligned buffer,
-+ //for IN data, we have to move the data to the original buffer
-+ if((urb->transfer_dma==urb->aligned_transfer_dma)&&((urb->transfer_flags & URB_DIR_MASK)==URB_DIR_IN)){
-+ dma_sync_single_for_device(NULL,urb->transfer_dma,urb->actual_length,DMA_FROM_DEVICE);
-+ memcpy(urb->transfer_buffer,urb->aligned_transfer_buffer,urb->actual_length);
-+ }
-+
-+
-+ urb->status = status;
-+ urb->hcpriv = NULL;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, status);
-+#else
-+ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, NULL);
-+#endif
-+}
-+
-+/*
-+ * Returns the Queue Head for an URB.
-+ */
-+dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb)
-+{
-+ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
-+ return (dwc_otg_qh_t *)ep->hcpriv;
-+}
-+
-+#ifdef DEBUG
-+void dwc_print_setup_data(uint8_t *setup)
-+{
-+ int i;
-+ if (CHK_DEBUG_LEVEL(DBG_HCD)){
-+ DWC_PRINT("Setup Data = MSB ");
-+ for (i = 7; i >= 0; i--) DWC_PRINT("%02x ", setup[i]);
-+ DWC_PRINT("\n");
-+ DWC_PRINT(" bmRequestType Tranfer = %s\n", (setup[0] & 0x80) ? "Device-to-Host" : "Host-to-Device");
-+ DWC_PRINT(" bmRequestType Type = ");
-+ switch ((setup[0] & 0x60) >> 5) {
-+ case 0: DWC_PRINT("Standard\n"); break;
-+ case 1: DWC_PRINT("Class\n"); break;
-+ case 2: DWC_PRINT("Vendor\n"); break;
-+ case 3: DWC_PRINT("Reserved\n"); break;
-+ }
-+ DWC_PRINT(" bmRequestType Recipient = ");
-+ switch (setup[0] & 0x1f) {
-+ case 0: DWC_PRINT("Device\n"); break;
-+ case 1: DWC_PRINT("Interface\n"); break;
-+ case 2: DWC_PRINT("Endpoint\n"); break;
-+ case 3: DWC_PRINT("Other\n"); break;
-+ default: DWC_PRINT("Reserved\n"); break;
-+ }
-+ DWC_PRINT(" bRequest = 0x%0x\n", setup[1]);
-+ DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t *)&setup[2]));
-+ DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t *)&setup[4]));
-+ DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_t *)&setup[6]));
-+ }
-+}
-+#endif
-+
-+void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd) {
-+#if defined(DEBUG) && LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ DWC_PRINT("Frame remaining at SOF:\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->frrem_samples, hcd->frrem_accum,
-+ (hcd->frrem_samples > 0) ?
-+ hcd->frrem_accum/hcd->frrem_samples : 0);
-+
-+ DWC_PRINT("\n");
-+ DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->core_if->hfnum_7_samples, hcd->core_if->hfnum_7_frrem_accum,
-+ (hcd->core_if->hfnum_7_samples > 0) ?
-+ hcd->core_if->hfnum_7_frrem_accum/hcd->core_if->hfnum_7_samples : 0);
-+ DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->core_if->hfnum_0_samples, hcd->core_if->hfnum_0_frrem_accum,
-+ (hcd->core_if->hfnum_0_samples > 0) ?
-+ hcd->core_if->hfnum_0_frrem_accum/hcd->core_if->hfnum_0_samples : 0);
-+ DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->core_if->hfnum_other_samples, hcd->core_if->hfnum_other_frrem_accum,
-+ (hcd->core_if->hfnum_other_samples > 0) ?
-+ hcd->core_if->hfnum_other_frrem_accum/hcd->core_if->hfnum_other_samples : 0);
-+
-+ DWC_PRINT("\n");
-+ DWC_PRINT("Frame remaining at sample point A (uframe 7):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a,
-+ (hcd->hfnum_7_samples_a > 0) ?
-+ hcd->hfnum_7_frrem_accum_a/hcd->hfnum_7_samples_a : 0);
-+ DWC_PRINT("Frame remaining at sample point A (uframe 0):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a,
-+ (hcd->hfnum_0_samples_a > 0) ?
-+ hcd->hfnum_0_frrem_accum_a/hcd->hfnum_0_samples_a : 0);
-+ DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a,
-+ (hcd->hfnum_other_samples_a > 0) ?
-+ hcd->hfnum_other_frrem_accum_a/hcd->hfnum_other_samples_a : 0);
-+
-+ DWC_PRINT("\n");
-+ DWC_PRINT("Frame remaining at sample point B (uframe 7):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b,
-+ (hcd->hfnum_7_samples_b > 0) ?
-+ hcd->hfnum_7_frrem_accum_b/hcd->hfnum_7_samples_b : 0);
-+ DWC_PRINT("Frame remaining at sample point B (uframe 0):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b,
-+ (hcd->hfnum_0_samples_b > 0) ?
-+ hcd->hfnum_0_frrem_accum_b/hcd->hfnum_0_samples_b : 0);
-+ DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b,
-+ (hcd->hfnum_other_samples_b > 0) ?
-+ hcd->hfnum_other_frrem_accum_b/hcd->hfnum_other_samples_b : 0);
-+#endif
-+}
-+
-+void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd)
-+{
-+#ifdef DEBUG
-+ int num_channels;
-+ int i;
-+ gnptxsts_data_t np_tx_status;
-+ hptxsts_data_t p_tx_status;
-+
-+ num_channels = hcd->core_if->core_params->host_channels;
-+ DWC_PRINT("\n");
-+ DWC_PRINT("************************************************************\n");
-+ DWC_PRINT("HCD State:\n");
-+ DWC_PRINT(" Num channels: %d\n", num_channels);
-+ for (i = 0; i < num_channels; i++) {
-+ dwc_hc_t *hc = hcd->hc_ptr_array[i];
-+ DWC_PRINT(" Channel %d:\n", i);
-+ DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
-+ hc->dev_addr, hc->ep_num, hc->ep_is_in);
-+ DWC_PRINT(" speed: %d\n", hc->speed);
-+ DWC_PRINT(" ep_type: %d\n", hc->ep_type);
-+ DWC_PRINT(" max_packet: %d\n", hc->max_packet);
-+ DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start);
-+ DWC_PRINT(" multi_count: %d\n", hc->multi_count);
-+ DWC_PRINT(" xfer_started: %d\n", hc->xfer_started);
-+ DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff);
-+ DWC_PRINT(" xfer_len: %d\n", hc->xfer_len);
-+ DWC_PRINT(" xfer_count: %d\n", hc->xfer_count);
-+ DWC_PRINT(" halt_on_queue: %d\n", hc->halt_on_queue);
-+ DWC_PRINT(" halt_pending: %d\n", hc->halt_pending);
-+ DWC_PRINT(" halt_status: %d\n", hc->halt_status);
-+ DWC_PRINT(" do_split: %d\n", hc->do_split);
-+ DWC_PRINT(" complete_split: %d\n", hc->complete_split);
-+ DWC_PRINT(" hub_addr: %d\n", hc->hub_addr);
-+ DWC_PRINT(" port_addr: %d\n", hc->port_addr);
-+ DWC_PRINT(" xact_pos: %d\n", hc->xact_pos);
-+ DWC_PRINT(" requests: %d\n", hc->requests);
-+ DWC_PRINT(" qh: %p\n", hc->qh);
-+ if (hc->xfer_started) {
-+ hfnum_data_t hfnum;
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum);
-+ hcchar.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcchar);
-+ hctsiz.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hctsiz);
-+ hcint.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcint);
-+ hcintmsk.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcintmsk);
-+ DWC_PRINT(" hfnum: 0x%08x\n", hfnum.d32);
-+ DWC_PRINT(" hcchar: 0x%08x\n", hcchar.d32);
-+ DWC_PRINT(" hctsiz: 0x%08x\n", hctsiz.d32);
-+ DWC_PRINT(" hcint: 0x%08x\n", hcint.d32);
-+ DWC_PRINT(" hcintmsk: 0x%08x\n", hcintmsk.d32);
-+ }
-+ if (hc->xfer_started && hc->qh && hc->qh->qtd_in_process) {
-+ dwc_otg_qtd_t *qtd;
-+ struct urb *urb;
-+ qtd = hc->qh->qtd_in_process;
-+ urb = qtd->urb;
-+ DWC_PRINT(" URB Info:\n");
-+ DWC_PRINT(" qtd: %p, urb: %p\n", qtd, urb);
-+ if (urb) {
-+ DWC_PRINT(" Dev: %d, EP: %d %s\n",
-+ usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe),
-+ usb_pipein(urb->pipe) ? "IN" : "OUT");
-+ DWC_PRINT(" Max packet size: %d\n",
-+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-+ DWC_PRINT(" transfer_buffer: %p\n", urb->transfer_buffer);
-+ DWC_PRINT(" transfer_dma: %p\n", (void *)urb->transfer_dma);
-+ DWC_PRINT(" transfer_buffer_length: %d\n", urb->transfer_buffer_length);
-+ DWC_PRINT(" actual_length: %d\n", urb->actual_length);
-+ }
-+ }
-+ }
-+ DWC_PRINT(" non_periodic_channels: %d\n", hcd->non_periodic_channels);
-+ DWC_PRINT(" periodic_channels: %d\n", hcd->periodic_channels);
-+ DWC_PRINT(" periodic_usecs: %d\n", hcd->periodic_usecs);
-+ np_tx_status.d32 = dwc_read_reg32(&hcd->core_if->core_global_regs->gnptxsts);
-+ DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail);
-+ DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail);
-+ p_tx_status.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hptxsts);
-+ DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail);
-+ DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
-+ dwc_otg_hcd_dump_frrem(hcd);
-+ dwc_otg_dump_global_registers(hcd->core_if);
-+ dwc_otg_dump_host_registers(hcd->core_if);
-+ DWC_PRINT("************************************************************\n");
-+ DWC_PRINT("\n");
-+#endif
-+}
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_hcd.h
-@@ -0,0 +1,663 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $
-+ * $Revision: #45 $
-+ * $Date: 2008/07/15 $
-+ * $Change: 1064918 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+#ifndef __DWC_HCD_H__
-+#define __DWC_HCD_H__
-+
-+#include <linux/list.h>
-+#include <linux/usb.h>
-+#include <../drivers/usb/core/hcd.h>
-+
-+struct lm_device;
-+struct dwc_otg_device;
-+
-+#include "dwc_otg_cil.h"
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the structures, constants, and interfaces for
-+ * the Host Contoller Driver (HCD).
-+ *
-+ * The Host Controller Driver (HCD) is responsible for translating requests
-+ * from the USB Driver into the appropriate actions on the DWC_otg controller.
-+ * It isolates the USBD from the specifics of the controller by providing an
-+ * API to the USBD.
-+ */
-+
-+/**
-+ * Phases for control transfers.
-+ */
-+typedef enum dwc_otg_control_phase {
-+ DWC_OTG_CONTROL_SETUP,
-+ DWC_OTG_CONTROL_DATA,
-+ DWC_OTG_CONTROL_STATUS
-+} dwc_otg_control_phase_e;
-+
-+/** Transaction types. */
-+typedef enum dwc_otg_transaction_type {
-+ DWC_OTG_TRANSACTION_NONE,
-+ DWC_OTG_TRANSACTION_PERIODIC,
-+ DWC_OTG_TRANSACTION_NON_PERIODIC,
-+ DWC_OTG_TRANSACTION_ALL
-+} dwc_otg_transaction_type_e;
-+
-+/**
-+ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
-+ * interrupt, or isochronous transfer. A single QTD is created for each URB
-+ * (of one of these types) submitted to the HCD. The transfer associated with
-+ * a QTD may require one or multiple transactions.
-+ *
-+ * A QTD is linked to a Queue Head, which is entered in either the
-+ * non-periodic or periodic schedule for execution. When a QTD is chosen for
-+ * execution, some or all of its transactions may be executed. After
-+ * execution, the state of the QTD is updated. The QTD may be retired if all
-+ * its transactions are complete or if an error occurred. Otherwise, it
-+ * remains in the schedule so more transactions can be executed later.
-+ */
-+typedef struct dwc_otg_qtd {
-+ /**
-+ * Determines the PID of the next data packet for the data phase of
-+ * control transfers. Ignored for other transfer types.<br>
-+ * One of the following values:
-+ * - DWC_OTG_HC_PID_DATA0
-+ * - DWC_OTG_HC_PID_DATA1
-+ */
-+ uint8_t data_toggle;
-+
-+ /** Current phase for control transfers (Setup, Data, or Status). */
-+ dwc_otg_control_phase_e control_phase;
-+
-+ /** Keep track of the current split type
-+ * for FS/LS endpoints on a HS Hub */
-+ uint8_t complete_split;
-+
-+ /** How many bytes transferred during SSPLIT OUT */
-+ uint32_t ssplit_out_xfer_count;
-+
-+ /**
-+ * Holds the number of bus errors that have occurred for a transaction
-+ * within this transfer.
-+ */
-+ uint8_t error_count;
-+
-+ /**
-+ * Index of the next frame descriptor for an isochronous transfer. A
-+ * frame descriptor describes the buffer position and length of the
-+ * data to be transferred in the next scheduled (micro)frame of an
-+ * isochronous transfer. It also holds status for that transaction.
-+ * The frame index starts at 0.
-+ */
-+ int isoc_frame_index;
-+
-+ /** Position of the ISOC split on full/low speed */
-+ uint8_t isoc_split_pos;
-+
-+ /** Position of the ISOC split in the buffer for the current frame */
-+ uint16_t isoc_split_offset;
-+
-+ /** URB for this transfer */
-+ struct urb *urb;
-+
-+ /** This list of QTDs */
-+ struct list_head qtd_list_entry;
-+
-+} dwc_otg_qtd_t;
-+
-+/**
-+ * A Queue Head (QH) holds the static characteristics of an endpoint and
-+ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
-+ * be entered in either the non-periodic or periodic schedule.
-+ */
-+typedef struct dwc_otg_qh {
-+ /**
-+ * Endpoint type.
-+ * One of the following values:
-+ * - USB_ENDPOINT_XFER_CONTROL
-+ * - USB_ENDPOINT_XFER_ISOC
-+ * - USB_ENDPOINT_XFER_BULK
-+ * - USB_ENDPOINT_XFER_INT
-+ */
-+ uint8_t ep_type;
-+ uint8_t ep_is_in;
-+
-+ /** wMaxPacketSize Field of Endpoint Descriptor. */
-+ uint16_t maxp;
-+
-+ /**
-+ * Determines the PID of the next data packet for non-control
-+ * transfers. Ignored for control transfers.<br>
-+ * One of the following values:
-+ * - DWC_OTG_HC_PID_DATA0
-+ * - DWC_OTG_HC_PID_DATA1
-+ */
-+ uint8_t data_toggle;
-+
-+ /** Ping state if 1. */
-+ uint8_t ping_state;
-+
-+ /**
-+ * List of QTDs for this QH.
-+ */
-+ struct list_head qtd_list;
-+
-+ /** Host channel currently processing transfers for this QH. */
-+ dwc_hc_t *channel;
-+
-+ /** QTD currently assigned to a host channel for this QH. */
-+ dwc_otg_qtd_t *qtd_in_process;
-+
-+ /** Full/low speed endpoint on high-speed hub requires split. */
-+ uint8_t do_split;
-+
-+ /** @name Periodic schedule information */
-+ /** @{ */
-+
-+ /** Bandwidth in microseconds per (micro)frame. */
-+ uint8_t usecs;
-+
-+ /** Interval between transfers in (micro)frames. */
-+ uint16_t interval;
-+
-+ /**
-+ * (micro)frame to initialize a periodic transfer. The transfer
-+ * executes in the following (micro)frame.
-+ */
-+ uint16_t sched_frame;
-+
-+ /** (micro)frame at which last start split was initialized. */
-+ uint16_t start_split_frame;
-+
-+ /** @} */
-+
-+ /** Entry for QH in either the periodic or non-periodic schedule. */
-+ struct list_head qh_list_entry;
-+} dwc_otg_qh_t;
-+
-+/**
-+ * This structure holds the state of the HCD, including the non-periodic and
-+ * periodic schedules.
-+ */
-+typedef struct dwc_otg_hcd {
-+ /** The DWC otg device pointer */
-+ struct dwc_otg_device *otg_dev;
-+
-+ /** DWC OTG Core Interface Layer */
-+ dwc_otg_core_if_t *core_if;
-+
-+ /** Internal DWC HCD Flags */
-+ volatile union dwc_otg_hcd_internal_flags {
-+ uint32_t d32;
-+ struct {
-+ unsigned port_connect_status_change : 1;
-+ unsigned port_connect_status : 1;
-+ unsigned port_reset_change : 1;
-+ unsigned port_enable_change : 1;
-+ unsigned port_suspend_change : 1;
-+ unsigned port_over_current_change : 1;
-+ unsigned reserved : 27;
-+ } b;
-+ } flags;
-+
-+ /**
-+ * Inactive items in the non-periodic schedule. This is a list of
-+ * Queue Heads. Transfers associated with these Queue Heads are not
-+ * currently assigned to a host channel.
-+ */
-+ struct list_head non_periodic_sched_inactive;
-+
-+ /**
-+ * Active items in the non-periodic schedule. This is a list of
-+ * Queue Heads. Transfers associated with these Queue Heads are
-+ * currently assigned to a host channel.
-+ */
-+ struct list_head non_periodic_sched_active;
-+
-+ /**
-+ * Pointer to the next Queue Head to process in the active
-+ * non-periodic schedule.
-+ */
-+ struct list_head *non_periodic_qh_ptr;
-+
-+ /**
-+ * Inactive items in the periodic schedule. This is a list of QHs for
-+ * periodic transfers that are _not_ scheduled for the next frame.
-+ * Each QH in the list has an interval counter that determines when it
-+ * needs to be scheduled for execution. This scheduling mechanism
-+ * allows only a simple calculation for periodic bandwidth used (i.e.
-+ * must assume that all periodic transfers may need to execute in the
-+ * same frame). However, it greatly simplifies scheduling and should
-+ * be sufficient for the vast majority of OTG hosts, which need to
-+ * connect to a small number of peripherals at one time.
-+ *
-+ * Items move from this list to periodic_sched_ready when the QH
-+ * interval counter is 0 at SOF.
-+ */
-+ struct list_head periodic_sched_inactive;
-+
-+ /**
-+ * List of periodic QHs that are ready for execution in the next
-+ * frame, but have not yet been assigned to host channels.
-+ *
-+ * Items move from this list to periodic_sched_assigned as host
-+ * channels become available during the current frame.
-+ */
-+ struct list_head periodic_sched_ready;
-+
-+ /**
-+ * List of periodic QHs to be executed in the next frame that are
-+ * assigned to host channels.
-+ *
-+ * Items move from this list to periodic_sched_queued as the
-+ * transactions for the QH are queued to the DWC_otg controller.
-+ */
-+ struct list_head periodic_sched_assigned;
-+
-+ /**
-+ * List of periodic QHs that have been queued for execution.
-+ *
-+ * Items move from this list to either periodic_sched_inactive or
-+ * periodic_sched_ready when the channel associated with the transfer
-+ * is released. If the interval for the QH is 1, the item moves to
-+ * periodic_sched_ready because it must be rescheduled for the next
-+ * frame. Otherwise, the item moves to periodic_sched_inactive.
-+ */
-+ struct list_head periodic_sched_queued;
-+
-+ /**
-+ * Total bandwidth claimed so far for periodic transfers. This value
-+ * is in microseconds per (micro)frame. The assumption is that all
-+ * periodic transfers may occur in the same (micro)frame.
-+ */
-+ uint16_t periodic_usecs;
-+
-+ /**
-+ * Frame number read from the core at SOF. The value ranges from 0 to
-+ * DWC_HFNUM_MAX_FRNUM.
-+ */
-+ uint16_t frame_number;
-+
-+ /**
-+ * Free host channels in the controller. This is a list of
-+ * dwc_hc_t items.
-+ */
-+ struct list_head free_hc_list;
-+
-+ /**
-+ * Number of host channels assigned to periodic transfers. Currently
-+ * assuming that there is a dedicated host channel for each periodic
-+ * transaction and at least one host channel available for
-+ * non-periodic transactions.
-+ */
-+ int periodic_channels;
-+
-+ /**
-+ * Number of host channels assigned to non-periodic transfers.
-+ */
-+ int non_periodic_channels;
-+
-+ /**
-+ * Array of pointers to the host channel descriptors. Allows accessing
-+ * a host channel descriptor given the host channel number. This is
-+ * useful in interrupt handlers.
-+ */
-+ dwc_hc_t *hc_ptr_array[MAX_EPS_CHANNELS];
-+
-+ /**
-+ * Buffer to use for any data received during the status phase of a
-+ * control transfer. Normally no data is transferred during the status
-+ * phase. This buffer is used as a bit bucket.
-+ */
-+ uint8_t *status_buf;
-+
-+ /**
-+ * DMA address for status_buf.
-+ */
-+ dma_addr_t status_buf_dma;
-+#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
-+
-+ /**
-+ * Structure to allow starting the HCD in a non-interrupt context
-+ * during an OTG role change.
-+ */
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ struct work_struct start_work;
-+#else
-+ struct delayed_work start_work;
-+#endif
-+
-+ /**
-+ * Connection timer. An OTG host must display a message if the device
-+ * does not connect. Started when the VBus power is turned on via
-+ * sysfs attribute "buspower".
-+ */
-+ struct timer_list conn_timer;
-+
-+ /* Tasket to do a reset */
-+ struct tasklet_struct *reset_tasklet;
-+
-+ /* */
-+ spinlock_t lock;
-+
-+#ifdef DEBUG
-+ uint32_t frrem_samples;
-+ uint64_t frrem_accum;
-+
-+ uint32_t hfnum_7_samples_a;
-+ uint64_t hfnum_7_frrem_accum_a;
-+ uint32_t hfnum_0_samples_a;
-+ uint64_t hfnum_0_frrem_accum_a;
-+ uint32_t hfnum_other_samples_a;
-+ uint64_t hfnum_other_frrem_accum_a;
-+
-+ uint32_t hfnum_7_samples_b;
-+ uint64_t hfnum_7_frrem_accum_b;
-+ uint32_t hfnum_0_samples_b;
-+ uint64_t hfnum_0_frrem_accum_b;
-+ uint32_t hfnum_other_samples_b;
-+ uint64_t hfnum_other_frrem_accum_b;
-+#endif
-+} dwc_otg_hcd_t;
-+
-+/** Gets the dwc_otg_hcd from a struct usb_hcd */
-+static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
-+{
-+ return (dwc_otg_hcd_t *)(hcd->hcd_priv);
-+}
-+
-+/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
-+static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv);
-+}
-+
-+/** @name HCD Create/Destroy Functions */
-+/** @{ */
-+extern int dwc_otg_hcd_init(struct lm_device *lmdev);
-+extern void dwc_otg_hcd_remove(struct lm_device *lmdev);
-+/** @} */
-+
-+/** @name Linux HC Driver API Functions */
-+/** @{ */
-+
-+extern int dwc_otg_hcd_start(struct usb_hcd *hcd);
-+extern void dwc_otg_hcd_stop(struct usb_hcd *hcd);
-+extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd);
-+extern void dwc_otg_hcd_free(struct usb_hcd *hcd);
-+extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
-+ // struct usb_host_endpoint *ep,
-+ struct urb *urb,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ int mem_flags
-+#else
-+ gfp_t mem_flags
-+#endif
-+ );
-+extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ struct usb_host_endpoint *ep,
-+#endif
-+ struct urb *urb, int status);
-+extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
-+ struct usb_host_endpoint *ep);
-+extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ , struct pt_regs *regs
-+#endif
-+ );
-+extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd,
-+ char *buf);
-+extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
-+ u16 typeReq,
-+ u16 wValue,
-+ u16 wIndex,
-+ char *buf,
-+ u16 wLength);
-+
-+/** @} */
-+
-+/** @name Transaction Execution Functions */
-+/** @{ */
-+extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd);
-+extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd,
-+ dwc_otg_transaction_type_e tr_type);
-+extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *urb,
-+ int status);
-+/** @} */
-+
-+/** @name Interrupt Handler Functions */
-+/** @{ */
-+extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num);
-+extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+/** @} */
-+
-+
-+/** @name Schedule Queue Functions */
-+/** @{ */
-+
-+/* Implemented in dwc_otg_hcd_queue.c */
-+extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t *hcd, struct urb *urb);
-+extern void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb);
-+extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
-+extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
-+extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
-+extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_csplit);
-+
-+/** Remove and free a QH */
-+static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t *hcd,
-+ dwc_otg_qh_t *qh)
-+{
-+ dwc_otg_hcd_qh_remove(hcd, qh);
-+ dwc_otg_hcd_qh_free(hcd, qh);
-+}
-+
-+/** Allocates memory for a QH structure.
-+ * @return Returns the memory allocate or NULL on error. */
-+static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(void)
-+{
-+ return (dwc_otg_qh_t *) kmalloc(sizeof(dwc_otg_qh_t), GFP_KERNEL);
-+}
-+
-+extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(struct urb *urb);
-+extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t *qtd, struct urb *urb);
-+extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd);
-+
-+/** Allocates memory for a QTD structure.
-+ * @return Returns the memory allocate or NULL on error. */
-+static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(void)
-+{
-+ return (dwc_otg_qtd_t *) kmalloc(sizeof(dwc_otg_qtd_t), GFP_KERNEL);
-+}
-+
-+/** Frees the memory for a QTD structure. QTD should already be removed from
-+ * list.
-+ * @param[in] qtd QTD to free.*/
-+static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t *qtd)
-+{
-+ kfree(qtd);
-+}
-+
-+/** Removes a QTD from list.
-+ * @param[in] hcd HCD instance.
-+ * @param[in] qtd QTD to remove from list. */
-+static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd)
-+{
-+ unsigned long flags;
-+ SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-+ list_del(&qtd->qtd_list_entry);
-+ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
-+}
-+
-+/** Remove and free a QTD */
-+static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd)
-+{
-+ dwc_otg_hcd_qtd_remove(hcd, qtd);
-+ dwc_otg_hcd_qtd_free(qtd);
-+}
-+
-+/** @} */
-+
-+
-+/** @name Internal Functions */
-+/** @{ */
-+dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb);
-+void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd);
-+void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd);
-+/** @} */
-+
-+/** Gets the usb_host_endpoint associated with an URB. */
-+static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb)
-+{
-+ struct usb_device *dev = urb->dev;
-+ int ep_num = usb_pipeendpoint(urb->pipe);
-+
-+ if (usb_pipein(urb->pipe))
-+ return dev->ep_in[ep_num];
-+ else
-+ return dev->ep_out[ep_num];
-+}
-+
-+/**
-+ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
-+ * qualified with its direction (possible 32 endpoints per device).
-+ */
-+#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
-+ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
-+
-+/** Gets the QH that contains the list_head */
-+#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry)
-+
-+/** Gets the QTD that contains the list_head */
-+#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry)
-+
-+/** Check if QH is non-periodic */
-+#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \
-+ (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL))
-+
-+/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
-+#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
-+
-+/** Packet size for any kind of endpoint descriptor */
-+#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
-+
-+/**
-+ * Returns true if _frame1 is less than or equal to _frame2. The comparison is
-+ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
-+ * frame number when the max frame number is reached.
-+ */
-+static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2)
-+{
-+ return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <=
-+ (DWC_HFNUM_MAX_FRNUM >> 1);
-+}
-+
-+/**
-+ * Returns true if _frame1 is greater than _frame2. The comparison is done
-+ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
-+ * number when the max frame number is reached.
-+ */
-+static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2)
-+{
-+ return (frame1 != frame2) &&
-+ (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) <
-+ (DWC_HFNUM_MAX_FRNUM >> 1));
-+}
-+
-+/**
-+ * Increments _frame by the amount specified by _inc. The addition is done
-+ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
-+ */
-+static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc)
-+{
-+ return (frame + inc) & DWC_HFNUM_MAX_FRNUM;
-+}
-+
-+static inline uint16_t dwc_full_frame_num(uint16_t frame)
-+{
-+ return (frame & DWC_HFNUM_MAX_FRNUM) >> 3;
-+}
-+
-+static inline uint16_t dwc_micro_frame_num(uint16_t frame)
-+{
-+ return frame & 0x7;
-+}
-+
-+#ifdef DEBUG
-+/**
-+ * Macro to sample the remaining PHY clocks left in the current frame. This
-+ * may be used during debugging to determine the average time it takes to
-+ * execute sections of code. There are two possible sample points, "a" and
-+ * "b", so the _letter argument must be one of these values.
-+ *
-+ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
-+ * example, "cat /sys/devices/lm0/hcd_frrem".
-+ */
-+#define dwc_sample_frrem(_hcd, _qh, _letter) \
-+{ \
-+ hfnum_data_t hfnum; \
-+ dwc_otg_qtd_t *qtd; \
-+ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
-+ if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
-+ hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
-+ switch (hfnum.b.frnum & 0x7) { \
-+ case 7: \
-+ _hcd->hfnum_7_samples_##_letter++; \
-+ _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
-+ break; \
-+ case 0: \
-+ _hcd->hfnum_0_samples_##_letter++; \
-+ _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
-+ break; \
-+ default: \
-+ _hcd->hfnum_other_samples_##_letter++; \
-+ _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
-+ break; \
-+ } \
-+ } \
-+}
-+#else
-+#define dwc_sample_frrem(_hcd, _qh, _letter)
-+#endif
-+#endif
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_hcd_intr.c
-@@ -0,0 +1,1829 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $
-+ * $Revision: #70 $
-+ * $Date: 2008/10/16 $
-+ * $Change: 1117667 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+
-+#include <linux/version.h>
-+
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_hcd.h"
-+#include "dwc_otg_regs.h"
-+
-+/** @file
-+ * This file contains the implementation of the HCD Interrupt handlers.
-+ */
-+
-+/** This function handles interrupts for the HCD. */
-+int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ int retval = 0;
-+
-+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-+ gintsts_data_t gintsts;
-+#ifdef DEBUG
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+#endif
-+
-+ /* Check if HOST Mode */
-+ if (dwc_otg_is_host_mode(core_if)) {
-+ gintsts.d32 = dwc_otg_read_core_intr(core_if);
-+ if (!gintsts.d32) {
-+ return 0;
-+ }
-+
-+#ifdef DEBUG
-+ /* Don't print debug message in the interrupt handler on SOF */
-+# ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+# endif
-+ DWC_DEBUGPL(DBG_HCD, "\n");
-+#endif
-+
-+#ifdef DEBUG
-+# ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+# endif
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32);
-+#endif
-+ if (gintsts.b.usbreset) {
-+ DWC_PRINT("Usb Reset In Host Mode\n");
-+ }
-+
-+
-+ if (gintsts.b.sofintr) {
-+ retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd);
-+ }
-+ if (gintsts.b.rxstsqlvl) {
-+ retval |= dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd);
-+ }
-+ if (gintsts.b.nptxfempty) {
-+ retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd);
-+ }
-+ if (gintsts.b.i2cintr) {
-+ /** @todo Implement i2cintr handler. */
-+ }
-+ if (gintsts.b.portintr) {
-+ retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd);
-+ }
-+ if (gintsts.b.hcintr) {
-+ retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd);
-+ }
-+ if (gintsts.b.ptxfempty) {
-+ retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd);
-+ }
-+#ifdef DEBUG
-+# ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+# endif
-+ {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Finished Servicing Interrupts\n");
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
-+ dwc_read_reg32(&global_regs->gintsts));
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
-+ dwc_read_reg32(&global_regs->gintmsk));
-+ }
-+#endif
-+
-+#ifdef DEBUG
-+# ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+# endif
-+ DWC_DEBUGPL(DBG_HCD, "\n");
-+#endif
-+
-+ }
-+
-+ S3C2410X_CLEAR_EINTPEND();
-+
-+ return retval;
-+}
-+
-+#ifdef DWC_TRACK_MISSED_SOFS
-+#warning Compiling code to track missed SOFs
-+#define FRAME_NUM_ARRAY_SIZE 1000
-+/**
-+ * This function is for debug only.
-+ */
-+static inline void track_missed_sofs(uint16_t curr_frame_number)
-+{
-+ static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE];
-+ static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
-+ static int frame_num_idx = 0;
-+ static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM;
-+ static int dumped_frame_num_array = 0;
-+
-+ if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
-+ if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != curr_frame_number) {
-+ frame_num_array[frame_num_idx] = curr_frame_number;
-+ last_frame_num_array[frame_num_idx++] = last_frame_num;
-+ }
-+ } else if (!dumped_frame_num_array) {
-+ int i;
-+ printk(KERN_EMERG USB_DWC "Frame Last Frame\n");
-+ printk(KERN_EMERG USB_DWC "----- ----------\n");
-+ for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
-+ printk(KERN_EMERG USB_DWC "0x%04x 0x%04x\n",
-+ frame_num_array[i], last_frame_num_array[i]);
-+ }
-+ dumped_frame_num_array = 1;
-+ }
-+ last_frame_num = curr_frame_number;
-+}
-+#endif
-+
-+/**
-+ * Handles the start-of-frame interrupt in host mode. Non-periodic
-+ * transactions may be queued to the DWC_otg controller for the current
-+ * (micro)frame. Periodic transactions may be queued to the controller for the
-+ * next (micro)frame.
-+ */
-+int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *hcd)
-+{
-+ hfnum_data_t hfnum;
-+ struct list_head *qh_entry;
-+ dwc_otg_qh_t *qh;
-+ dwc_otg_transaction_type_e tr_type;
-+ gintsts_data_t gintsts = {.d32 = 0};
-+
-+ hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum);
-+
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
-+#endif
-+ hcd->frame_number = hfnum.b.frnum;
-+
-+#ifdef DEBUG
-+ hcd->frrem_accum += hfnum.b.frrem;
-+ hcd->frrem_samples++;
-+#endif
-+
-+#ifdef DWC_TRACK_MISSED_SOFS
-+ track_missed_sofs(hcd->frame_number);
-+#endif
-+
-+ /* Determine whether any periodic QHs should be executed. */
-+ qh_entry = hcd->periodic_sched_inactive.next;
-+ while (qh_entry != &hcd->periodic_sched_inactive) {
-+ qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry);
-+ qh_entry = qh_entry->next;
-+ if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) {
-+ /*
-+ * Move QH to the ready list to be executed next
-+ * (micro)frame.
-+ */
-+ list_move(&qh->qh_list_entry, &hcd->periodic_sched_ready);
-+ }
-+ }
-+
-+ tr_type = dwc_otg_hcd_select_transactions(hcd);
-+ if (tr_type != DWC_OTG_TRANSACTION_NONE) {
-+ dwc_otg_hcd_queue_transactions(hcd, tr_type);
-+ }
-+
-+ /* Clear interrupt */
-+ gintsts.b.sofintr = 1;
-+ dwc_write_reg32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
-+ * least one packet in the Rx FIFO. The packets are moved from the FIFO to
-+ * memory if the DWC_otg controller is operating in Slave mode. */
-+int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ host_grxsts_data_t grxsts;
-+ dwc_hc_t *hc = NULL;
-+
-+ DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
-+
-+ grxsts.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp);
-+
-+ hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
-+
-+ /* Packet Status */
-+ DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum);
-+ DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt);
-+ DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start);
-+ DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts);
-+
-+ switch (grxsts.b.pktsts) {
-+ case DWC_GRXSTS_PKTSTS_IN:
-+ /* Read the data into the host buffer. */
-+ if (grxsts.b.bcnt > 0) {
-+ dwc_otg_read_packet(dwc_otg_hcd->core_if,
-+ hc->xfer_buff,
-+ grxsts.b.bcnt);
-+
-+ /* Update the HC fields for the next packet received. */
-+ hc->xfer_count += grxsts.b.bcnt;
-+ hc->xfer_buff += grxsts.b.bcnt;
-+ }
-+
-+ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
-+ case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
-+ case DWC_GRXSTS_PKTSTS_CH_HALTED:
-+ /* Handled in interrupt, just ignore data */
-+ break;
-+ default:
-+ DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts);
-+ break;
-+ }
-+
-+ return 1;
-+}
-+
-+/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
-+ * data packets may be written to the FIFO for OUT transfers. More requests
-+ * may be written to the non-periodic request queue for IN transfers. This
-+ * interrupt is enabled only in Slave mode. */
-+int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
-+ dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
-+ DWC_OTG_TRANSACTION_NON_PERIODIC);
-+ return 1;
-+}
-+
-+/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
-+ * packets may be written to the FIFO for OUT transfers. More requests may be
-+ * written to the periodic request queue for IN transfers. This interrupt is
-+ * enabled only in Slave mode. */
-+int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");
-+ dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
-+ DWC_OTG_TRANSACTION_PERIODIC);
-+ return 1;
-+}
-+
-+/** There are multiple conditions that can cause a port interrupt. This function
-+ * determines which interrupt conditions have occurred and handles them
-+ * appropriately. */
-+int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ int retval = 0;
-+ hprt0_data_t hprt0;
-+ hprt0_data_t hprt0_modify;
-+
-+ hprt0.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0);
-+ hprt0_modify.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0);
-+
-+ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in
-+ * GINTSTS */
-+
-+ hprt0_modify.b.prtena = 0;
-+ hprt0_modify.b.prtconndet = 0;
-+ hprt0_modify.b.prtenchng = 0;
-+ hprt0_modify.b.prtovrcurrchng = 0;
-+
-+ /* Port Connect Detected
-+ * Set flag and clear if detected */
-+ if (hprt0.b.prtconndet) {
-+ DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
-+ "Port Connect Detected--\n", hprt0.d32);
-+ dwc_otg_hcd->flags.b.port_connect_status_change = 1;
-+ dwc_otg_hcd->flags.b.port_connect_status = 1;
-+ hprt0_modify.b.prtconndet = 1;
-+
-+ /* B-Device has connected, Delete the connection timer. */
-+ del_timer( &dwc_otg_hcd->conn_timer );
-+
-+ /* The Hub driver asserts a reset when it sees port connect
-+ * status change flag */
-+ retval |= 1;
-+ }
-+
-+ /* Port Enable Changed
-+ * Clear if detected - Set internal flag if disabled */
-+ if (hprt0.b.prtenchng) {
-+ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
-+ "Port Enable Changed--\n", hprt0.d32);
-+ hprt0_modify.b.prtenchng = 1;
-+ if (hprt0.b.prtena == 1) {
-+ int do_reset = 0;
-+ dwc_otg_core_params_t *params = dwc_otg_hcd->core_if->core_params;
-+ dwc_otg_core_global_regs_t *global_regs = dwc_otg_hcd->core_if->core_global_regs;
-+ dwc_otg_host_if_t *host_if = dwc_otg_hcd->core_if->host_if;
-+
-+ /* Check if we need to adjust the PHY clock speed for
-+ * low power and adjust it */
-+ if (params->host_support_fs_ls_low_power) {
-+ gusbcfg_data_t usbcfg;
-+
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+
-+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED ||
-+ hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) {
-+ /*
-+ * Low power
-+ */
-+ hcfg_data_t hcfg;
-+ if (usbcfg.b.phylpwrclksel == 0) {
-+ /* Set PHY low power clock select for FS/LS devices */
-+ usbcfg.b.phylpwrclksel = 1;
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+ do_reset = 1;
-+ }
-+
-+ hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
-+
-+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED &&
-+ params->host_ls_low_power_phy_clk ==
-+ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) {
-+ /* 6 MHZ */
-+ DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
-+ if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) {
-+ hcfg.b.fslspclksel = DWC_HCFG_6_MHZ;
-+ dwc_write_reg32(&host_if->host_global_regs->hcfg,
-+ hcfg.d32);
-+ do_reset = 1;
-+ }
-+ } else {
-+ /* 48 MHZ */
-+ DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n");
-+ if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) {
-+ hcfg.b.fslspclksel = DWC_HCFG_48_MHZ;
-+ dwc_write_reg32(&host_if->host_global_regs->hcfg,
-+ hcfg.d32);
-+ do_reset = 1;
-+ }
-+ }
-+ } else {
-+ /*
-+ * Not low power
-+ */
-+ if (usbcfg.b.phylpwrclksel == 1) {
-+ usbcfg.b.phylpwrclksel = 0;
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+ do_reset = 1;
-+ }
-+ }
-+
-+ if (do_reset) {
-+ tasklet_schedule(dwc_otg_hcd->reset_tasklet);
-+ }
-+ }
-+
-+ if (!do_reset) {
-+ /* Port has been enabled set the reset change flag */
-+ dwc_otg_hcd->flags.b.port_reset_change = 1;
-+ }
-+ } else {
-+ dwc_otg_hcd->flags.b.port_enable_change = 1;
-+ }
-+ retval |= 1;
-+ }
-+
-+ /** Overcurrent Change Interrupt */
-+ if (hprt0.b.prtovrcurrchng) {
-+ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
-+ "Port Overcurrent Changed--\n", hprt0.d32);
-+ dwc_otg_hcd->flags.b.port_over_current_change = 1;
-+ hprt0_modify.b.prtovrcurrchng = 1;
-+ retval |= 1;
-+ }
-+
-+ /* Clear Port Interrupts */
-+ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
-+
-+ return retval;
-+}
-+
-+/** This interrupt indicates that one or more host channels has a pending
-+ * interrupt. There are multiple conditions that can cause each host channel
-+ * interrupt. This function determines which conditions have occurred for each
-+ * host channel interrupt and handles them appropriately. */
-+int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ int i;
-+ int retval = 0;
-+ haint_data_t haint;
-+
-+ /* Clear appropriate bits in HCINTn to clear the interrupt bit in
-+ * GINTSTS */
-+
-+ haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if);
-+
-+ for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) {
-+ if (haint.b2.chint & (1 << i)) {
-+ retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i);
-+ }
-+ }
-+
-+ return retval;
-+}
-+
-+/* Macro used to clear one channel interrupt */
-+#define clear_hc_int(_hc_regs_, _intr_) \
-+do { \
-+ hcint_data_t hcint_clear = {.d32 = 0}; \
-+ hcint_clear.b._intr_ = 1; \
-+ dwc_write_reg32(&(_hc_regs_)->hcint, hcint_clear.d32); \
-+} while (0)
-+
-+/*
-+ * Macro used to disable one channel interrupt. Channel interrupts are
-+ * disabled when the channel is halted or released by the interrupt handler.
-+ * There is no need to handle further interrupts of that type until the
-+ * channel is re-assigned. In fact, subsequent handling may cause crashes
-+ * because the channel structures are cleaned up when the channel is released.
-+ */
-+#define disable_hc_int(_hc_regs_, _intr_) \
-+do { \
-+ hcintmsk_data_t hcintmsk = {.d32 = 0}; \
-+ hcintmsk.b._intr_ = 1; \
-+ dwc_modify_reg32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \
-+} while (0)
-+
-+/**
-+ * Gets the actual length of a transfer after the transfer halts. _halt_status
-+ * holds the reason for the halt.
-+ *
-+ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE,
-+ * *short_read is set to 1 upon return if less than the requested
-+ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon
-+ * return. short_read may also be NULL on entry, in which case it remains
-+ * unchanged.
-+ */
-+static uint32_t get_actual_xfer_length(dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd,
-+ dwc_otg_halt_status_e halt_status,
-+ int *short_read)
-+{
-+ hctsiz_data_t hctsiz;
-+ uint32_t length;
-+
-+ if (short_read != NULL) {
-+ *short_read = 0;
-+ }
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+
-+ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
-+ if (hc->ep_is_in) {
-+ length = hc->xfer_len - hctsiz.b.xfersize;
-+ if (short_read != NULL) {
-+ *short_read = (hctsiz.b.xfersize != 0);
-+ }
-+ } else if (hc->qh->do_split) {
-+ length = qtd->ssplit_out_xfer_count;
-+ } else {
-+ length = hc->xfer_len;
-+ }
-+ } else {
-+ /*
-+ * Must use the hctsiz.pktcnt field to determine how much data
-+ * has been transferred. This field reflects the number of
-+ * packets that have been transferred via the USB. This is
-+ * always an integral number of packets if the transfer was
-+ * halted before its normal completion. (Can't use the
-+ * hctsiz.xfersize field because that reflects the number of
-+ * bytes transferred via the AHB, not the USB).
-+ */
-+ length = (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet;
-+ }
-+
-+ return length;
-+}
-+
-+/**
-+ * Updates the state of the URB after a Transfer Complete interrupt on the
-+ * host channel. Updates the actual_length field of the URB based on the
-+ * number of bytes transferred via the host channel. Sets the URB status
-+ * if the data transfer is finished.
-+ *
-+ * @return 1 if the data transfer specified by the URB is completely finished,
-+ * 0 otherwise.
-+ */
-+static int update_urb_state_xfer_comp(dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ struct urb *urb,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ int xfer_done = 0;
-+ int short_read = 0;
-+
-+ urb->actual_length += get_actual_xfer_length(hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_COMPLETE,
-+ &short_read);
-+
-+ if (short_read || urb->actual_length == urb->transfer_buffer_length) {
-+ xfer_done = 1;
-+ if (short_read && (urb->transfer_flags & URB_SHORT_NOT_OK)) {
-+ urb->status = -EREMOTEIO;
-+ } else {
-+ urb->status = 0;
-+ }
-+ }
-+
-+#ifdef DEBUG
-+ {
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
-+ __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", hc->xfer_len);
-+ DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", hctsiz.b.xfersize);
-+ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
-+ urb->transfer_buffer_length);
-+ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", urb->actual_length);
-+ DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n",
-+ short_read, xfer_done);
-+ }
-+#endif
-+
-+ return xfer_done;
-+}
-+
-+/*
-+ * Save the starting data toggle for the next transfer. The data toggle is
-+ * saved in the QH for non-control transfers and it's saved in the QTD for
-+ * control transfers.
-+ */
-+static void save_data_toggle(dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+
-+ if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
-+ dwc_otg_qh_t *qh = hc->qh;
-+ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
-+ qh->data_toggle = DWC_OTG_HC_PID_DATA0;
-+ } else {
-+ qh->data_toggle = DWC_OTG_HC_PID_DATA1;
-+ }
-+ } else {
-+ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
-+ qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
-+ } else {
-+ qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
-+ }
-+ }
-+}
-+
-+/**
-+ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
-+ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
-+ * still linked to the QH, the QH is added to the end of the inactive
-+ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
-+ * schedule if no more QTDs are linked to the QH.
-+ */
-+static void deactivate_qh(dwc_otg_hcd_t *hcd,
-+ dwc_otg_qh_t *qh,
-+ int free_qtd)
-+{
-+ int continue_split = 0;
-+ dwc_otg_qtd_t *qtd;
-+
-+ DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd);
-+
-+ qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-+
-+ if (qtd->complete_split) {
-+ continue_split = 1;
-+ } else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID ||
-+ qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) {
-+ continue_split = 1;
-+ }
-+
-+ if (free_qtd) {
-+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd);
-+ continue_split = 0;
-+ }
-+
-+ qh->channel = NULL;
-+ qh->qtd_in_process = NULL;
-+ dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split);
-+}
-+
-+/**
-+ * Updates the state of an Isochronous URB when the transfer is stopped for
-+ * any reason. The fields of the current entry in the frame descriptor array
-+ * are set based on the transfer state and the input _halt_status. Completes
-+ * the Isochronous URB if all the URB frames have been completed.
-+ *
-+ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
-+ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
-+ */
-+static dwc_otg_halt_status_e
-+update_isoc_urb_state(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ struct urb *urb = qtd->urb;
-+ dwc_otg_halt_status_e ret_val = halt_status;
-+ struct usb_iso_packet_descriptor *frame_desc;
-+
-+ frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
-+ switch (halt_status) {
-+ case DWC_OTG_HC_XFER_COMPLETE:
-+ frame_desc->status = 0;
-+ frame_desc->actual_length =
-+ get_actual_xfer_length(hc, hc_regs, qtd,
-+ halt_status, NULL);
-+ break;
-+ case DWC_OTG_HC_XFER_FRAME_OVERRUN:
-+ urb->error_count++;
-+ if (hc->ep_is_in) {
-+ frame_desc->status = -ENOSR;
-+ } else {
-+ frame_desc->status = -ECOMM;
-+ }
-+ frame_desc->actual_length = 0;
-+ break;
-+ case DWC_OTG_HC_XFER_BABBLE_ERR:
-+ urb->error_count++;
-+ frame_desc->status = -EOVERFLOW;
-+ /* Don't need to update actual_length in this case. */
-+ break;
-+ case DWC_OTG_HC_XFER_XACT_ERR:
-+ urb->error_count++;
-+ frame_desc->status = -EPROTO;
-+ frame_desc->actual_length =
-+ get_actual_xfer_length(hc, hc_regs, qtd,
-+ halt_status, NULL);
-+ default:
-+ DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__,
-+ halt_status);
-+ BUG();
-+ break;
-+ }
-+
-+ if (++qtd->isoc_frame_index == urb->number_of_packets) {
-+ /*
-+ * urb->status is not used for isoc transfers.
-+ * The individual frame_desc statuses are used instead.
-+ */
-+ dwc_otg_hcd_complete_urb(hcd, urb, 0);
-+ ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
-+ } else {
-+ ret_val = DWC_OTG_HC_XFER_COMPLETE;
-+ }
-+
-+ return ret_val;
-+}
-+
-+/**
-+ * Releases a host channel for use by other transfers. Attempts to select and
-+ * queue more transactions since at least one host channel is available.
-+ *
-+ * @param hcd The HCD state structure.
-+ * @param hc The host channel to release.
-+ * @param qtd The QTD associated with the host channel. This QTD may be freed
-+ * if the transfer is complete or an error has occurred.
-+ * @param halt_status Reason the channel is being released. This status
-+ * determines the actions taken by this function.
-+ */
-+static void release_channel(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_qtd_t *qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ dwc_otg_transaction_type_e tr_type;
-+ int free_qtd;
-+
-+ DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n",
-+ __func__, hc->hc_num, halt_status);
-+
-+ switch (halt_status) {
-+ case DWC_OTG_HC_XFER_URB_COMPLETE:
-+ free_qtd = 1;
-+ break;
-+ case DWC_OTG_HC_XFER_AHB_ERR:
-+ case DWC_OTG_HC_XFER_STALL:
-+ case DWC_OTG_HC_XFER_BABBLE_ERR:
-+ free_qtd = 1;
-+ break;
-+ case DWC_OTG_HC_XFER_XACT_ERR:
-+ if (qtd->error_count >= 3) {
-+ DWC_DEBUGPL(DBG_HCDV, " Complete URB with transaction error\n");
-+ free_qtd = 1;
-+ qtd->urb->status = -EPROTO;
-+ dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EPROTO);
-+ } else {
-+ free_qtd = 0;
-+ }
-+ break;
-+ case DWC_OTG_HC_XFER_URB_DEQUEUE:
-+ /*
-+ * The QTD has already been removed and the QH has been
-+ * deactivated. Don't want to do anything except release the
-+ * host channel and try to queue more transfers.
-+ */
-+ goto cleanup;
-+ case DWC_OTG_HC_XFER_NO_HALT_STATUS:
-+ DWC_ERROR("%s: No halt_status, channel %d\n", __func__, hc->hc_num);
-+ free_qtd = 0;
-+ break;
-+ default:
-+ free_qtd = 0;
-+ break;
-+ }
-+
-+ deactivate_qh(hcd, hc->qh, free_qtd);
-+
-+ cleanup:
-+ /*
-+ * Release the host channel for use by other transfers. The cleanup
-+ * function clears the channel interrupt enables and conditions, so
-+ * there's no need to clear the Channel Halted interrupt separately.
-+ */
-+ dwc_otg_hc_cleanup(hcd->core_if, hc);
-+ list_add_tail(&hc->hc_list_entry, &hcd->free_hc_list);
-+
-+ switch (hc->ep_type) {
-+ case DWC_OTG_EP_TYPE_CONTROL:
-+ case DWC_OTG_EP_TYPE_BULK:
-+ hcd->non_periodic_channels--;
-+ break;
-+
-+ default:
-+ /*
-+ * Don't release reservations for periodic channels here.
-+ * That's done when a periodic transfer is descheduled (i.e.
-+ * when the QH is removed from the periodic schedule).
-+ */
-+ break;
-+ }
-+
-+ /* Try to queue more transfers now that there's a free channel. */
-+ tr_type = dwc_otg_hcd_select_transactions(hcd);
-+ if (tr_type != DWC_OTG_TRANSACTION_NONE) {
-+ dwc_otg_hcd_queue_transactions(hcd, tr_type);
-+ }
-+}
-+
-+/**
-+ * Halts a host channel. If the channel cannot be halted immediately because
-+ * the request queue is full, this function ensures that the FIFO empty
-+ * interrupt for the appropriate queue is enabled so that the halt request can
-+ * be queued when there is space in the request queue.
-+ *
-+ * This function may also be called in DMA mode. In that case, the channel is
-+ * simply released since the core always halts the channel automatically in
-+ * DMA mode.
-+ */
-+static void halt_channel(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_qtd_t *qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ if (hcd->core_if->dma_enable) {
-+ release_channel(hcd, hc, qtd, halt_status);
-+ return;
-+ }
-+
-+ /* Slave mode processing... */
-+ dwc_otg_hc_halt(hcd->core_if, hc, halt_status);
-+
-+ if (hc->halt_on_queue) {
-+ gintmsk_data_t gintmsk = {.d32 = 0};
-+ dwc_otg_core_global_regs_t *global_regs;
-+ global_regs = hcd->core_if->core_global_regs;
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
-+ /*
-+ * Make sure the Non-periodic Tx FIFO empty interrupt
-+ * is enabled so that the non-periodic schedule will
-+ * be processed.
-+ */
-+ gintmsk.b.nptxfempty = 1;
-+ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
-+ } else {
-+ /*
-+ * Move the QH from the periodic queued schedule to
-+ * the periodic assigned schedule. This allows the
-+ * halt to be queued when the periodic schedule is
-+ * processed.
-+ */
-+ list_move(&hc->qh->qh_list_entry,
-+ &hcd->periodic_sched_assigned);
-+
-+ /*
-+ * Make sure the Periodic Tx FIFO Empty interrupt is
-+ * enabled so that the periodic schedule will be
-+ * processed.
-+ */
-+ gintmsk.b.ptxfempty = 1;
-+ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
-+ }
-+ }
-+}
-+
-+/**
-+ * Performs common cleanup for non-periodic transfers after a Transfer
-+ * Complete interrupt. This function should be called after any endpoint type
-+ * specific handling is finished to release the host channel.
-+ */
-+static void complete_non_periodic_xfer(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ hcint_data_t hcint;
-+
-+ qtd->error_count = 0;
-+
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ if (hcint.b.nyet) {
-+ /*
-+ * Got a NYET on the last transaction of the transfer. This
-+ * means that the endpoint should be in the PING state at the
-+ * beginning of the next transfer.
-+ */
-+ hc->qh->ping_state = 1;
-+ clear_hc_int(hc_regs, nyet);
-+ }
-+
-+ /*
-+ * Always halt and release the host channel to make it available for
-+ * more transfers. There may still be more phases for a control
-+ * transfer or more data packets for a bulk transfer at this point,
-+ * but the host channel is still halted. A channel will be reassigned
-+ * to the transfer when the non-periodic schedule is processed after
-+ * the channel is released. This allows transactions to be queued
-+ * properly via dwc_otg_hcd_queue_transactions, which also enables the
-+ * Tx FIFO Empty interrupt if necessary.
-+ */
-+ if (hc->ep_is_in) {
-+ /*
-+ * IN transfers in Slave mode require an explicit disable to
-+ * halt the channel. (In DMA mode, this call simply releases
-+ * the channel.)
-+ */
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ } else {
-+ /*
-+ * The channel is automatically disabled by the core for OUT
-+ * transfers in Slave mode.
-+ */
-+ release_channel(hcd, hc, qtd, halt_status);
-+ }
-+}
-+
-+/**
-+ * Performs common cleanup for periodic transfers after a Transfer Complete
-+ * interrupt. This function should be called after any endpoint type specific
-+ * handling is finished to release the host channel.
-+ */
-+static void complete_periodic_xfer(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ hctsiz_data_t hctsiz;
-+ qtd->error_count = 0;
-+
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+ if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) {
-+ /* Core halts channel in these cases. */
-+ release_channel(hcd, hc, qtd, halt_status);
-+ } else {
-+ /* Flush any outstanding requests from the Tx queue. */
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ }
-+}
-+
-+/**
-+ * Handles a host channel Transfer Complete interrupt. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ int urb_xfer_done;
-+ dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ struct urb *urb = qtd->urb;
-+ int pipe_type = usb_pipetype(urb->pipe);
-+
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Transfer Complete--\n", hc->hc_num);
-+
-+ /*
-+ * Handle xfer complete on CSPLIT.
-+ */
-+ if (hc->qh->do_split) {
-+ qtd->complete_split = 0;
-+ }
-+
-+ /* Update the QTD and URB states. */
-+ switch (pipe_type) {
-+ case PIPE_CONTROL:
-+ switch (qtd->control_phase) {
-+ case DWC_OTG_CONTROL_SETUP:
-+ if (urb->transfer_buffer_length > 0) {
-+ qtd->control_phase = DWC_OTG_CONTROL_DATA;
-+ } else {
-+ qtd->control_phase = DWC_OTG_CONTROL_STATUS;
-+ }
-+ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n");
-+ halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ break;
-+ case DWC_OTG_CONTROL_DATA: {
-+ urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
-+ if (urb_xfer_done) {
-+ qtd->control_phase = DWC_OTG_CONTROL_STATUS;
-+ DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n");
-+ } else {
-+ save_data_toggle(hc, hc_regs, qtd);
-+ }
-+ halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ break;
-+ }
-+ case DWC_OTG_CONTROL_STATUS:
-+ DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n");
-+ if (urb->status == -EINPROGRESS) {
-+ urb->status = 0;
-+ }
-+ dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
-+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
-+ break;
-+ }
-+
-+ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
-+ break;
-+ case PIPE_BULK:
-+ DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n");
-+ urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
-+ if (urb_xfer_done) {
-+ dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
-+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
-+ } else {
-+ halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ }
-+
-+ save_data_toggle(hc, hc_regs, qtd);
-+ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
-+ break;
-+ case PIPE_INTERRUPT:
-+ DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n");
-+ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
-+
-+ /*
-+ * Interrupt URB is done on the first transfer complete
-+ * interrupt.
-+ */
-+ dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
-+ save_data_toggle(hc, hc_regs, qtd);
-+ complete_periodic_xfer(hcd, hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_URB_COMPLETE);
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n");
-+ if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) {
-+ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_COMPLETE);
-+ }
-+ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
-+ break;
-+ }
-+
-+ disable_hc_int(hc_regs, xfercompl);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel STALL interrupt. This handler may be called in
-+ * either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ struct urb *urb = qtd->urb;
-+ int pipe_type = usb_pipetype(urb->pipe);
-+
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "STALL Received--\n", hc->hc_num);
-+
-+ if (pipe_type == PIPE_CONTROL) {
-+ dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE);
-+ }
-+
-+ if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) {
-+ dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE);
-+ /*
-+ * USB protocol requires resetting the data toggle for bulk
-+ * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
-+ * setup command is issued to the endpoint. Anticipate the
-+ * CLEAR_FEATURE command since a STALL has occurred and reset
-+ * the data toggle now.
-+ */
-+ hc->qh->data_toggle = 0;
-+ }
-+
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL);
-+
-+ disable_hc_int(hc_regs, stall);
-+
-+ return 1;
-+}
-+
-+/*
-+ * Updates the state of the URB when a transfer has been stopped due to an
-+ * abnormal condition before the transfer completes. Modifies the
-+ * actual_length field of the URB to reflect the number of bytes that have
-+ * actually been transferred via the host channel.
-+ */
-+static void update_urb_state_xfer_intr(dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ struct urb *urb,
-+ dwc_otg_qtd_t *qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd,
-+ halt_status, NULL);
-+ urb->actual_length += bytes_transferred;
-+
-+#ifdef DEBUG
-+ {
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
-+ __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " hc->start_pkt_count %d\n", hc->start_pkt_count);
-+ DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
-+ DWC_DEBUGPL(DBG_HCDV, " hc->max_packet %d\n", hc->max_packet);
-+ DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", bytes_transferred);
-+ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", urb->actual_length);
-+ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
-+ urb->transfer_buffer_length);
-+ }
-+#endif
-+}
-+
-+/**
-+ * Handles a host channel NAK interrupt. This handler may be called in either
-+ * DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "NAK Received--\n", hc->hc_num);
-+
-+ /*
-+ * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
-+ * interrupt. Re-start the SSPLIT transfer.
-+ */
-+ if (hc->do_split) {
-+ if (hc->complete_split) {
-+ qtd->error_count = 0;
-+ }
-+ qtd->complete_split = 0;
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
-+ goto handle_nak_done;
-+ }
-+
-+ switch (usb_pipetype(qtd->urb->pipe)) {
-+ case PIPE_CONTROL:
-+ case PIPE_BULK:
-+ if (hcd->core_if->dma_enable && hc->ep_is_in) {
-+ /*
-+ * NAK interrupts are enabled on bulk/control IN
-+ * transfers in DMA mode for the sole purpose of
-+ * resetting the error count after a transaction error
-+ * occurs. The core will continue transferring data.
-+ */
-+ qtd->error_count = 0;
-+ goto handle_nak_done;
-+ }
-+
-+ /*
-+ * NAK interrupts normally occur during OUT transfers in DMA
-+ * or Slave mode. For IN transfers, more requests will be
-+ * queued as request queue space is available.
-+ */
-+ qtd->error_count = 0;
-+
-+ if (!hc->qh->ping_state) {
-+ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
-+ qtd, DWC_OTG_HC_XFER_NAK);
-+ save_data_toggle(hc, hc_regs, qtd);
-+ if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
-+ hc->qh->ping_state = 1;
-+ }
-+ }
-+
-+ /*
-+ * Halt the channel so the transfer can be re-started from
-+ * the appropriate point or the PING protocol will
-+ * start/continue.
-+ */
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
-+ break;
-+ case PIPE_INTERRUPT:
-+ qtd->error_count = 0;
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ /* Should never get called for isochronous transfers. */
-+ BUG();
-+ break;
-+ }
-+
-+ handle_nak_done:
-+ disable_hc_int(hc_regs, nak);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel ACK interrupt. This interrupt is enabled when
-+ * performing the PING protocol in Slave mode, when errors occur during
-+ * either Slave mode or DMA mode, and during Start Split transactions.
-+ */
-+static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "ACK Received--\n", hc->hc_num);
-+
-+ if (hc->do_split) {
-+ /*
-+ * Handle ACK on SSPLIT.
-+ * ACK should not occur in CSPLIT.
-+ */
-+ if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) {
-+ qtd->ssplit_out_xfer_count = hc->xfer_len;
-+ }
-+ if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) {
-+ /* Don't need complete for isochronous out transfers. */
-+ qtd->complete_split = 1;
-+ }
-+
-+ /* ISOC OUT */
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
-+ switch (hc->xact_pos) {
-+ case DWC_HCSPLIT_XACTPOS_ALL:
-+ break;
-+ case DWC_HCSPLIT_XACTPOS_END:
-+ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
-+ qtd->isoc_split_offset = 0;
-+ break;
-+ case DWC_HCSPLIT_XACTPOS_BEGIN:
-+ case DWC_HCSPLIT_XACTPOS_MID:
-+ /*
-+ * For BEGIN or MID, calculate the length for
-+ * the next microframe to determine the correct
-+ * SSPLIT token, either MID or END.
-+ */
-+ {
-+ struct usb_iso_packet_descriptor *frame_desc;
-+
-+ frame_desc = &qtd->urb->iso_frame_desc[qtd->isoc_frame_index];
-+ qtd->isoc_split_offset += 188;
-+
-+ if ((frame_desc->length - qtd->isoc_split_offset) <= 188) {
-+ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END;
-+ } else {
-+ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID;
-+ }
-+
-+ }
-+ break;
-+ }
-+ } else {
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
-+ }
-+ } else {
-+ qtd->error_count = 0;
-+
-+ if (hc->qh->ping_state) {
-+ hc->qh->ping_state = 0;
-+ /*
-+ * Halt the channel so the transfer can be re-started
-+ * from the appropriate point. This only happens in
-+ * Slave mode. In DMA mode, the ping_state is cleared
-+ * when the transfer is started because the core
-+ * automatically executes the PING, then the transfer.
-+ */
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
-+ }
-+ }
-+
-+ /*
-+ * If the ACK occurred when _not_ in the PING state, let the channel
-+ * continue transferring data after clearing the error count.
-+ */
-+
-+ disable_hc_int(hc_regs, ack);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel NYET interrupt. This interrupt should only occur on
-+ * Bulk and Control OUT endpoints and for complete split transactions. If a
-+ * NYET occurs at the same time as a Transfer Complete interrupt, it is
-+ * handled in the xfercomp interrupt handler, not here. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "NYET Received--\n", hc->hc_num);
-+
-+ /*
-+ * NYET on CSPLIT
-+ * re-do the CSPLIT immediately on non-periodic
-+ */
-+ if (hc->do_split && hc->complete_split) {
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
-+
-+ if (dwc_full_frame_num(frnum) !=
-+ dwc_full_frame_num(hc->qh->sched_frame)) {
-+ /*
-+ * No longer in the same full speed frame.
-+ * Treat this as a transaction error.
-+ */
-+#if 0
-+ /** @todo Fix system performance so this can
-+ * be treated as an error. Right now complete
-+ * splits cannot be scheduled precisely enough
-+ * due to other system activity, so this error
-+ * occurs regularly in Slave mode.
-+ */
-+ qtd->error_count++;
-+#endif
-+ qtd->complete_split = 0;
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ /** @todo add support for isoc release */
-+ goto handle_nyet_done;
-+ }
-+ }
-+
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
-+ goto handle_nyet_done;
-+ }
-+
-+ hc->qh->ping_state = 1;
-+ qtd->error_count = 0;
-+
-+ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd,
-+ DWC_OTG_HC_XFER_NYET);
-+ save_data_toggle(hc, hc_regs, qtd);
-+
-+ /*
-+ * Halt the channel and re-start the transfer so the PING
-+ * protocol will start.
-+ */
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
-+
-+handle_nyet_done:
-+ disable_hc_int(hc_regs, nyet);
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel babble interrupt. This handler may be called in
-+ * either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Babble Error--\n", hc->hc_num);
-+ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
-+ dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EOVERFLOW);
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR);
-+ } else {
-+ dwc_otg_halt_status_e halt_status;
-+ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_BABBLE_ERR);
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ }
-+ disable_hc_int(hc_regs, bblerr);
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel AHB error interrupt. This handler is only called in
-+ * DMA mode.
-+ */
-+static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ hcchar_data_t hcchar;
-+ hcsplt_data_t hcsplt;
-+ hctsiz_data_t hctsiz;
-+ uint32_t hcdma;
-+ struct urb *urb = qtd->urb;
-+
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "AHB Error--\n", hc->hc_num);
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+ hcdma = dwc_read_reg32(&hc_regs->hcdma);
-+
-+ DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num);
-+ DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
-+ DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
-+ DWC_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe));
-+ DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
-+ (usb_pipein(urb->pipe) ? "IN" : "OUT"));
-+ DWC_ERROR(" Endpoint type: %s\n",
-+ ({char *pipetype;
-+ switch (usb_pipetype(urb->pipe)) {
-+ case PIPE_CONTROL: pipetype = "CONTROL"; break;
-+ case PIPE_BULK: pipetype = "BULK"; break;
-+ case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
-+ case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
-+ default: pipetype = "UNKNOWN"; break;
-+ }; pipetype;}));
-+ DWC_ERROR(" Speed: %s\n",
-+ ({char *speed;
-+ switch (urb->dev->speed) {
-+ case USB_SPEED_HIGH: speed = "HIGH"; break;
-+ case USB_SPEED_FULL: speed = "FULL"; break;
-+ case USB_SPEED_LOW: speed = "LOW"; break;
-+ default: speed = "UNKNOWN"; break;
-+ }; speed;}));
-+ DWC_ERROR(" Max packet size: %d\n",
-+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-+ DWC_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length);
-+ DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n",
-+ urb->transfer_buffer, (void *)urb->transfer_dma);
-+ DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n",
-+ urb->setup_packet, (void *)urb->setup_dma);
-+ DWC_ERROR(" Interval: %d\n", urb->interval);
-+
-+ dwc_otg_hcd_complete_urb(hcd, urb, -EIO);
-+
-+ /*
-+ * Force a channel halt. Don't call halt_channel because that won't
-+ * write to the HCCHARn register in DMA mode to force the halt.
-+ */
-+ dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR);
-+
-+ disable_hc_int(hc_regs, ahberr);
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel transaction error interrupt. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Transaction Error--\n", hc->hc_num);
-+
-+ switch (usb_pipetype(qtd->urb->pipe)) {
-+ case PIPE_CONTROL:
-+ case PIPE_BULK:
-+ qtd->error_count++;
-+ if (!hc->qh->ping_state) {
-+ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
-+ qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ save_data_toggle(hc, hc_regs, qtd);
-+ if (!hc->ep_is_in && qtd->urb->dev->speed == USB_SPEED_HIGH) {
-+ hc->qh->ping_state = 1;
-+ }
-+ }
-+
-+ /*
-+ * Halt the channel so the transfer can be re-started from
-+ * the appropriate point or the PING protocol will start.
-+ */
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ break;
-+ case PIPE_INTERRUPT:
-+ qtd->error_count++;
-+ if (hc->do_split && hc->complete_split) {
-+ qtd->complete_split = 0;
-+ }
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ {
-+ dwc_otg_halt_status_e halt_status;
-+ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_XACT_ERR);
-+
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ }
-+ break;
-+ }
-+
-+ disable_hc_int(hc_regs, xacterr);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel frame overrun interrupt. This handler may be called
-+ * in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Frame Overrun--\n", hc->hc_num);
-+
-+ switch (usb_pipetype(qtd->urb->pipe)) {
-+ case PIPE_CONTROL:
-+ case PIPE_BULK:
-+ break;
-+ case PIPE_INTERRUPT:
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN);
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ {
-+ dwc_otg_halt_status_e halt_status;
-+ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_FRAME_OVERRUN);
-+
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ }
-+ break;
-+ }
-+
-+ disable_hc_int(hc_regs, frmovrun);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel data toggle error interrupt. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Data Toggle Error--\n", hc->hc_num);
-+
-+ if (hc->ep_is_in) {
-+ qtd->error_count = 0;
-+ } else {
-+ DWC_ERROR("Data Toggle Error on OUT transfer,"
-+ "channel %d\n", hc->hc_num);
-+ }
-+
-+ disable_hc_int(hc_regs, datatglerr);
-+
-+ return 1;
-+}
-+
-+#ifdef DEBUG
-+/**
-+ * This function is for debug only. It checks that a valid halt status is set
-+ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
-+ * taken and a warning is issued.
-+ * @return 1 if halt status is ok, 0 otherwise.
-+ */
-+static inline int halt_status_ok(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ hcsplt_data_t hcsplt;
-+
-+ if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
-+ /*
-+ * This code is here only as a check. This condition should
-+ * never happen. Ignore the halt if it does occur.
-+ */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
-+ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
-+ DWC_WARN("%s: hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, "
-+ "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
-+ "hcint 0x%08x, hcintmsk 0x%08x, "
-+ "hcsplt 0x%08x, qtd->complete_split %d\n",
-+ __func__, hc->hc_num, hcchar.d32, hctsiz.d32,
-+ hcint.d32, hcintmsk.d32,
-+ hcsplt.d32, qtd->complete_split);
-+
-+ DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
-+ __func__, hc->hc_num);
-+ DWC_WARN("\n");
-+ clear_hc_int(hc_regs, chhltd);
-+ return 0;
-+ }
-+
-+ /*
-+ * This code is here only as a check. hcchar.chdis should
-+ * never be set when the halt interrupt occurs. Halt the
-+ * channel again if it does occur.
-+ */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chdis) {
-+ DWC_WARN("%s: hcchar.chdis set unexpectedly, "
-+ "hcchar 0x%08x, trying to halt again\n",
-+ __func__, hcchar.d32);
-+ clear_hc_int(hc_regs, chhltd);
-+ hc->halt_pending = 0;
-+ halt_channel(hcd, hc, qtd, hc->halt_status);
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+#endif
-+
-+/**
-+ * Handles a host Channel Halted interrupt in DMA mode. This handler
-+ * determines the reason the channel halted and proceeds accordingly.
-+ */
-+static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ int out_nak_enh = 0;
-+
-+ /* For core with OUT NAK enhancement, the flow for high-
-+ * speed CONTROL/BULK OUT is handled a little differently.
-+ */
-+ if (hcd->core_if->snpsid >= 0x4F54271A) {
-+ if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in &&
-+ (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_BULK)) {
-+ DWC_DEBUGPL(DBG_HCD, "OUT NAK enhancement enabled\n");
-+ out_nak_enh = 1;
-+ } else {
-+ DWC_DEBUGPL(DBG_HCD, "OUT NAK enhancement disabled, not HS Ctrl/Bulk OUT EP\n");
-+ }
-+ } else {
-+ DWC_DEBUGPL(DBG_HCD, "OUT NAK enhancement disabled, no core support\n");
-+ }
-+
-+ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
-+ hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
-+ /*
-+ * Just release the channel. A dequeue can happen on a
-+ * transfer timeout. In the case of an AHB Error, the channel
-+ * was forced to halt because there's no way to gracefully
-+ * recover.
-+ */
-+ release_channel(hcd, hc, qtd, hc->halt_status);
-+ return;
-+ }
-+
-+ /* Read the HCINTn register to determine the cause for the halt. */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
-+
-+ if (hcint.b.xfercomp) {
-+ /** @todo This is here because of a possible hardware bug. Spec
-+ * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
-+ * interrupt w/ACK bit set should occur, but I only see the
-+ * XFERCOMP bit, even with it masked out. This is a workaround
-+ * for that behavior. Should fix this when hardware is fixed.
-+ */
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
-+ handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
-+ }
-+ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.stall) {
-+ handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.xacterr) {
-+ if (out_nak_enh) {
-+ if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) {
-+ printk(KERN_DEBUG "XactErr with NYET/NAK/ACK\n");
-+ qtd->error_count = 0;
-+ } else {
-+ printk(KERN_DEBUG "XactErr without NYET/NAK/ACK\n");
-+ }
-+ }
-+
-+ /*
-+ * Must handle xacterr before nak or ack. Could get a xacterr
-+ * at the same time as either of these on a BULK/CONTROL OUT
-+ * that started with a PING. The xacterr takes precedence.
-+ */
-+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
-+ } else if (!out_nak_enh) {
-+ if (hcint.b.nyet) {
-+ /*
-+ * Must handle nyet before nak or ack. Could get a nyet at the
-+ * same time as either of those on a BULK/CONTROL OUT that
-+ * started with a PING. The nyet takes precedence.
-+ */
-+ handle_hc_nyet_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.bblerr) {
-+ handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.frmovrun) {
-+ handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.nak && !hcintmsk.b.nak) {
-+ /*
-+ * If nak is not masked, it's because a non-split IN transfer
-+ * is in an error state. In that case, the nak is handled by
-+ * the nak interrupt handler, not here. Handle nak here for
-+ * BULK/CONTROL OUT transfers, which halt on a NAK to allow
-+ * rewinding the buffer pointer.
-+ */
-+ handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.ack && !hcintmsk.b.ack) {
-+ /*
-+ * If ack is not masked, it's because a non-split IN transfer
-+ * is in an error state. In that case, the ack is handled by
-+ * the ack interrupt handler, not here. Handle ack here for
-+ * split transfers. Start splits halt on ACK.
-+ */
-+ handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
-+ } else {
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * A periodic transfer halted with no other channel
-+ * interrupts set. Assume it was halted by the core
-+ * because it could not be completed in its scheduled
-+ * (micro)frame.
-+ */
-+#ifdef DEBUG
-+ DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n",
-+ __func__, hc->hc_num);
-+#endif
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE);
-+ } else {
-+ DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
-+ "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n",
-+ __func__, hc->hc_num, hcint.d32,
-+ dwc_read_reg32(&hcd->core_if->core_global_regs->gintsts));
-+ }
-+ }
-+ } else {
-+ printk(KERN_DEBUG "NYET/NAK/ACK/other in non-error case, 0x%08x\n", hcint.d32);
-+ }
-+}
-+
-+/**
-+ * Handles a host channel Channel Halted interrupt.
-+ *
-+ * In slave mode, this handler is called only when the driver specifically
-+ * requests a halt. This occurs during handling other host channel interrupts
-+ * (e.g. nak, xacterr, stall, nyet, etc.).
-+ *
-+ * In DMA mode, this is the interrupt that occurs when the core has finished
-+ * processing a transfer on a channel. Other host channel interrupts (except
-+ * ahberr) are disabled in DMA mode.
-+ */
-+static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Channel Halted--\n", hc->hc_num);
-+
-+ if (hcd->core_if->dma_enable) {
-+ handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd);
-+ } else {
-+#ifdef DEBUG
-+ if (!halt_status_ok(hcd, hc, hc_regs, qtd)) {
-+ return 1;
-+ }
-+#endif
-+ release_channel(hcd, hc, qtd, hc->halt_status);
-+ }
-+
-+ return 1;
-+}
-+
-+/** Handles interrupt for a specific Host Channel */
-+int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num)
-+{
-+ int retval = 0;
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ dwc_hc_t *hc;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ dwc_otg_qtd_t *qtd;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num);
-+
-+ hc = dwc_otg_hcd->hc_ptr_array[num];
-+ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num];
-+ qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-+
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
-+ DWC_DEBUGPL(DBG_HCDV, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
-+ hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
-+ hcint.d32 = hcint.d32 & hcintmsk.d32;
-+
-+ if (!dwc_otg_hcd->core_if->dma_enable) {
-+ if (hcint.b.chhltd && hcint.d32 != 0x2) {
-+ hcint.b.chhltd = 0;
-+ }
-+ }
-+
-+ if (hcint.b.xfercomp) {
-+ retval |= handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ /*
-+ * If NYET occurred at same time as Xfer Complete, the NYET is
-+ * handled by the Xfer Complete interrupt handler. Don't want
-+ * to call the NYET interrupt handler in this case.
-+ */
-+ hcint.b.nyet = 0;
-+ }
-+ if (hcint.b.chhltd) {
-+ retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.ahberr) {
-+ retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.stall) {
-+ retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.nak) {
-+ retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.ack) {
-+ retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.nyet) {
-+ retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.xacterr) {
-+ retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.bblerr) {
-+ retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.frmovrun) {
-+ retval |= handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.datatglerr) {
-+ retval |= handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+
-+ return retval;
-+}
-+
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_hcd_queue.c
-@@ -0,0 +1,716 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $
-+ * $Revision: #33 $
-+ * $Date: 2008/07/15 $
-+ * $Change: 1064918 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the functions to manage Queue Heads and Queue
-+ * Transfer Descriptors.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/string.h>
-+#include <linux/version.h>
-+
-+#include <mach/lm.h>
-+#include <mach/irqs.h>
-+
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_hcd.h"
-+#include "dwc_otg_regs.h"
-+
-+/**
-+ * This function allocates and initializes a QH.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param[in] urb Holds the information about the device/endpoint that we need
-+ * to initialize the QH.
-+ *
-+ * @return Returns pointer to the newly allocated QH, or NULL on error. */
-+dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *hcd, struct urb *urb)
-+{
-+ dwc_otg_qh_t *qh;
-+
-+ /* Allocate memory */
-+ /** @todo add memflags argument */
-+ qh = dwc_otg_hcd_qh_alloc ();
-+ if (qh == NULL) {
-+ return NULL;
-+ }
-+
-+ dwc_otg_hcd_qh_init (hcd, qh, urb);
-+ return qh;
-+}
-+
-+/** Free each QTD in the QH's QTD-list then free the QH. QH should already be
-+ * removed from a list. QTD list should already be empty if called from URB
-+ * Dequeue.
-+ *
-+ * @param[in] hcd HCD instance.
-+ * @param[in] qh The QH to free.
-+ */
-+void dwc_otg_hcd_qh_free (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ dwc_otg_qtd_t *qtd;
-+ struct list_head *pos;
-+ //unsigned long flags;
-+
-+ /* Free each QTD in the QTD list */
-+
-+#if CONFIG_SMP
-+ //the spinlock is locked before this function get called,
-+ //but in case the lock is needed, the check function is preserved
-+
-+ //but in non-SMP mode, all spinlock is lockable.
-+ //don't do the test in non-SMP mode
-+
-+ if(spin_trylock(&hcd->lock)) {
-+ printk("%s: It is not supposed to be lockable!!\n",__func__);
-+ BUG();
-+ }
-+#endif
-+// SPIN_LOCK_IRQSAVE(&hcd->lock, flags)
-+ for (pos = qh->qtd_list.next;
-+ pos != &qh->qtd_list;
-+ pos = qh->qtd_list.next)
-+ {
-+ list_del (pos);
-+ qtd = dwc_list_to_qtd (pos);
-+ dwc_otg_hcd_qtd_free (qtd);
-+ }
-+// SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
-+
-+ kfree (qh);
-+ return;
-+}
-+
-+/** Initializes a QH structure.
-+ *
-+ * @param[in] hcd The HCD state structure for the DWC OTG controller.
-+ * @param[in] qh The QH to init.
-+ * @param[in] urb Holds the information about the device/endpoint that we need
-+ * to initialize the QH. */
-+#define SCHEDULE_SLOP 10
-+void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb)
-+{
-+ char *speed, *type;
-+ memset (qh, 0, sizeof (dwc_otg_qh_t));
-+
-+ /* Initialize QH */
-+ switch (usb_pipetype(urb->pipe)) {
-+ case PIPE_CONTROL:
-+ qh->ep_type = USB_ENDPOINT_XFER_CONTROL;
-+ break;
-+ case PIPE_BULK:
-+ qh->ep_type = USB_ENDPOINT_XFER_BULK;
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ qh->ep_type = USB_ENDPOINT_XFER_ISOC;
-+ break;
-+ case PIPE_INTERRUPT:
-+ qh->ep_type = USB_ENDPOINT_XFER_INT;
-+ break;
-+ }
-+
-+ qh->ep_is_in = usb_pipein(urb->pipe) ? 1 : 0;
-+
-+ qh->data_toggle = DWC_OTG_HC_PID_DATA0;
-+ qh->maxp = usb_maxpacket(urb->dev, urb->pipe, !(usb_pipein(urb->pipe)));
-+ INIT_LIST_HEAD(&qh->qtd_list);
-+ INIT_LIST_HEAD(&qh->qh_list_entry);
-+ qh->channel = NULL;
-+
-+ /* FS/LS Enpoint on HS Hub
-+ * NOT virtual root hub */
-+ qh->do_split = 0;
-+ if (((urb->dev->speed == USB_SPEED_LOW) ||
-+ (urb->dev->speed == USB_SPEED_FULL)) &&
-+ (urb->dev->tt) && (urb->dev->tt->hub) && (urb->dev->tt->hub->devnum != 1))
-+ {
-+ DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
-+ usb_pipeendpoint(urb->pipe), urb->dev->tt->hub->devnum,
-+ urb->dev->ttport);
-+ qh->do_split = 1;
-+ }
-+
-+ if (qh->ep_type == USB_ENDPOINT_XFER_INT ||
-+ qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
-+ /* Compute scheduling parameters once and save them. */
-+ hprt0_data_t hprt;
-+
-+ /** @todo Account for split transfers in the bus time. */
-+ int bytecount = dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp);
-+ qh->usecs = usb_calc_bus_time(urb->dev->speed,
-+ usb_pipein(urb->pipe),
-+ (qh->ep_type == USB_ENDPOINT_XFER_ISOC),
-+ bytecount);
-+
-+ /* Start in a slightly future (micro)frame. */
-+ qh->sched_frame = dwc_frame_num_inc(hcd->frame_number,
-+ SCHEDULE_SLOP);
-+ qh->interval = urb->interval;
-+#if 0
-+ /* Increase interrupt polling rate for debugging. */
-+ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
-+ qh->interval = 8;
-+ }
-+#endif
-+ hprt.d32 = dwc_read_reg32(hcd->core_if->host_if->hprt0);
-+ if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
-+ ((urb->dev->speed == USB_SPEED_LOW) ||
-+ (urb->dev->speed == USB_SPEED_FULL))) {
-+ qh->interval *= 8;
-+ qh->sched_frame |= 0x7;
-+ qh->start_split_frame = qh->sched_frame;
-+ }
-+
-+ }
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", qh);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n",
-+ urb->dev->devnum);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n",
-+ usb_pipeendpoint(urb->pipe),
-+ usb_pipein(urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
-+
-+ switch(urb->dev->speed) {
-+ case USB_SPEED_LOW:
-+ speed = "low";
-+ break;
-+ case USB_SPEED_FULL:
-+ speed = "full";
-+ break;
-+ case USB_SPEED_HIGH:
-+ speed = "high";
-+ break;
-+ default:
-+ speed = "?";
-+ break;
-+ }
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", speed);
-+
-+ switch (qh->ep_type) {
-+ case USB_ENDPOINT_XFER_ISOC:
-+ type = "isochronous";
-+ break;
-+ case USB_ENDPOINT_XFER_INT:
-+ type = "interrupt";
-+ break;
-+ case USB_ENDPOINT_XFER_CONTROL:
-+ type = "control";
-+ break;
-+ case USB_ENDPOINT_XFER_BULK:
-+ type = "bulk";
-+ break;
-+ default:
-+ type = "?";
-+ break;
-+ }
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n",type);
-+
-+#ifdef DEBUG
-+ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
-+ qh->usecs);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
-+ qh->interval);
-+ }
-+#endif
-+
-+ return;
-+}
-+
-+/**
-+ * Checks that a channel is available for a periodic transfer.
-+ *
-+ * @return 0 if successful, negative error code otherise.
-+ */
-+static int periodic_channel_available(dwc_otg_hcd_t *hcd)
-+{
-+ /*
-+ * Currently assuming that there is a dedicated host channnel for each
-+ * periodic transaction plus at least one host channel for
-+ * non-periodic transactions.
-+ */
-+ int status;
-+ int num_channels;
-+
-+ num_channels = hcd->core_if->core_params->host_channels;
-+ if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) &&
-+ (hcd->periodic_channels < num_channels - 1)) {
-+ status = 0;
-+ }
-+ else {
-+ DWC_NOTICE("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n",
-+ __func__, num_channels, hcd->periodic_channels,
-+ hcd->non_periodic_channels);
-+ status = -ENOSPC;
-+ }
-+
-+ return status;
-+}
-+
-+/**
-+ * Checks that there is sufficient bandwidth for the specified QH in the
-+ * periodic schedule. For simplicity, this calculation assumes that all the
-+ * transfers in the periodic schedule may occur in the same (micro)frame.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh QH containing periodic bandwidth required.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+static int check_periodic_bandwidth(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ int status;
-+ uint16_t max_claimed_usecs;
-+
-+ status = 0;
-+
-+ if (hcd->core_if->core_params->speed == DWC_SPEED_PARAM_HIGH) {
-+ /*
-+ * High speed mode.
-+ * Max periodic usecs is 80% x 125 usec = 100 usec.
-+ */
-+ max_claimed_usecs = 100 - qh->usecs;
-+ } else {
-+ /*
-+ * Full speed mode.
-+ * Max periodic usecs is 90% x 1000 usec = 900 usec.
-+ */
-+ max_claimed_usecs = 900 - qh->usecs;
-+ }
-+
-+ if (hcd->periodic_usecs > max_claimed_usecs) {
-+ DWC_NOTICE("%s: already claimed usecs %d, required usecs %d\n",
-+ __func__, hcd->periodic_usecs, qh->usecs);
-+ status = -ENOSPC;
-+ }
-+
-+ return status;
-+}
-+
-+/**
-+ * Checks that the max transfer size allowed in a host channel is large enough
-+ * to handle the maximum data transfer in a single (micro)frame for a periodic
-+ * transfer.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh QH for a periodic endpoint.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+static int check_max_xfer_size(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ int status;
-+ uint32_t max_xfer_size;
-+ uint32_t max_channel_xfer_size;
-+
-+ status = 0;
-+
-+ max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp);
-+ max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size;
-+
-+ if (max_xfer_size > max_channel_xfer_size) {
-+ DWC_NOTICE("%s: Periodic xfer length %d > "
-+ "max xfer length for channel %d\n",
-+ __func__, max_xfer_size, max_channel_xfer_size);
-+ status = -ENOSPC;
-+ }
-+
-+ return status;
-+}
-+
-+/**
-+ * Schedules an interrupt or isochronous transfer in the periodic schedule.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh QH for the periodic transfer. The QH should already contain the
-+ * scheduling information.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+static int schedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ int status = 0;
-+
-+ status = periodic_channel_available(hcd);
-+ if (status) {
-+ DWC_NOTICE("%s: No host channel available for periodic "
-+ "transfer.\n", __func__);
-+ return status;
-+ }
-+
-+ status = check_periodic_bandwidth(hcd, qh);
-+ if (status) {
-+ DWC_NOTICE("%s: Insufficient periodic bandwidth for "
-+ "periodic transfer.\n", __func__);
-+ return status;
-+ }
-+
-+ status = check_max_xfer_size(hcd, qh);
-+ if (status) {
-+ DWC_NOTICE("%s: Channel max transfer size too small "
-+ "for periodic transfer.\n", __func__);
-+ return status;
-+ }
-+
-+ /* Always start in the inactive schedule. */
-+ list_add_tail(&qh->qh_list_entry, &hcd->periodic_sched_inactive);
-+
-+ /* Reserve the periodic channel. */
-+ hcd->periodic_channels++;
-+
-+ /* Update claimed usecs per (micro)frame. */
-+ hcd->periodic_usecs += qh->usecs;
-+
-+ /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated += qh->usecs / qh->interval;
-+ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs++;
-+ DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n",
-+ qh, qh->usecs, qh->interval);
-+ } else {
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs++;
-+ DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n",
-+ qh, qh->usecs, qh->interval);
-+ }
-+
-+ return status;
-+}
-+
-+/**
-+ * This function adds a QH to either the non periodic or periodic schedule if
-+ * it is not already in the schedule. If the QH is already in the schedule, no
-+ * action is taken.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ //unsigned long flags;
-+ int status = 0;
-+
-+#if CONFIG_SMP
-+ //the spinlock is locked before this function get called,
-+ //but in case the lock is needed, the check function is preserved
-+
-+ //but in non-SMP mode, all spinlock is lockable.
-+ //don't do the test in non-SMP mode
-+
-+ if(spin_trylock(&hcd->lock)) {
-+ printk("%s: It is not supposed to be lockable!!\n",__func__);
-+ BUG();
-+ }
-+#endif
-+// SPIN_LOCK_IRQSAVE(&hcd->lock, flags)
-+
-+ if (!list_empty(&qh->qh_list_entry)) {
-+ /* QH already in a schedule. */
-+ goto done;
-+ }
-+
-+ /* Add the new QH to the appropriate schedule */
-+ if (dwc_qh_is_non_per(qh)) {
-+ /* Always start in the inactive schedule. */
-+ list_add_tail(&qh->qh_list_entry, &hcd->non_periodic_sched_inactive);
-+ } else {
-+ status = schedule_periodic(hcd, qh);
-+ }
-+
-+ done:
-+// SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
-+
-+ return status;
-+}
-+
-+/**
-+ * Removes an interrupt or isochronous transfer from the periodic schedule.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh QH for the periodic transfer.
-+ */
-+static void deschedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ list_del_init(&qh->qh_list_entry);
-+
-+ /* Release the periodic channel reservation. */
-+ hcd->periodic_channels--;
-+
-+ /* Update claimed usecs per (micro)frame. */
-+ hcd->periodic_usecs -= qh->usecs;
-+
-+ /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated -= qh->usecs / qh->interval;
-+
-+ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs--;
-+ DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n",
-+ qh, qh->usecs, qh->interval);
-+ } else {
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs--;
-+ DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n",
-+ qh, qh->usecs, qh->interval);
-+ }
-+}
-+
-+/**
-+ * Removes a QH from either the non-periodic or periodic schedule. Memory is
-+ * not freed.
-+ *
-+ * @param[in] hcd The HCD state structure.
-+ * @param[in] qh QH to remove from schedule. */
-+void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ //unsigned long flags;
-+
-+#if CONFIG_SMP
-+ //the spinlock is locked before this function get called,
-+ //but in case the lock is needed, the check function is preserved
-+
-+ //but in non-SMP mode, all spinlock is lockable.
-+ //don't do the test in non-SMP mode
-+
-+ if(spin_trylock(&hcd->lock)) {
-+ printk("%s: It is not supposed to be lockable!!\n",__func__);
-+ BUG();
-+ }
-+#endif
-+// SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-+
-+ if (list_empty(&qh->qh_list_entry)) {
-+ /* QH is not in a schedule. */
-+ goto done;
-+ }
-+
-+ if (dwc_qh_is_non_per(qh)) {
-+ if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) {
-+ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
-+ }
-+ list_del_init(&qh->qh_list_entry);
-+ } else {
-+ deschedule_periodic(hcd, qh);
-+ }
-+
-+ done:
-+// SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
-+ return;
-+}
-+
-+/**
-+ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
-+ * non-periodic schedule. The QH is added to the inactive non-periodic
-+ * schedule if any QTDs are still attached to the QH.
-+ *
-+ * For periodic QHs, the QH is removed from the periodic queued schedule. If
-+ * there are any QTDs still attached to the QH, the QH is added to either the
-+ * periodic inactive schedule or the periodic ready schedule and its next
-+ * scheduled frame is calculated. The QH is placed in the ready schedule if
-+ * the scheduled frame has been reached already. Otherwise it's placed in the
-+ * inactive schedule. If there are no QTDs attached to the QH, the QH is
-+ * completely removed from the periodic schedule.
-+ */
-+void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_next_periodic_split)
-+{
-+ unsigned long flags;
-+ SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-+
-+ if (dwc_qh_is_non_per(qh)) {
-+ dwc_otg_hcd_qh_remove(hcd, qh);
-+ if (!list_empty(&qh->qtd_list)) {
-+ /* Add back to inactive non-periodic schedule. */
-+ dwc_otg_hcd_qh_add(hcd, qh);
-+ }
-+ } else {
-+ uint16_t frame_number = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
-+
-+ if (qh->do_split) {
-+ /* Schedule the next continuing periodic split transfer */
-+ if (sched_next_periodic_split) {
-+
-+ qh->sched_frame = frame_number;
-+ if (dwc_frame_num_le(frame_number,
-+ dwc_frame_num_inc(qh->start_split_frame, 1))) {
-+ /*
-+ * Allow one frame to elapse after start
-+ * split microframe before scheduling
-+ * complete split, but DONT if we are
-+ * doing the next start split in the
-+ * same frame for an ISOC out.
-+ */
-+ if ((qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (qh->ep_is_in != 0)) {
-+ qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, 1);
-+ }
-+ }
-+ } else {
-+ qh->sched_frame = dwc_frame_num_inc(qh->start_split_frame,
-+ qh->interval);
-+ if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
-+ qh->sched_frame = frame_number;
-+ }
-+ qh->sched_frame |= 0x7;
-+ qh->start_split_frame = qh->sched_frame;
-+ }
-+ } else {
-+ qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, qh->interval);
-+ if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
-+ qh->sched_frame = frame_number;
-+ }
-+ }
-+
-+ if (list_empty(&qh->qtd_list)) {
-+ dwc_otg_hcd_qh_remove(hcd, qh);
-+ } else {
-+ /*
-+ * Remove from periodic_sched_queued and move to
-+ * appropriate queue.
-+ */
-+ if (qh->sched_frame == frame_number) {
-+ list_move(&qh->qh_list_entry,
-+ &hcd->periodic_sched_ready);
-+ } else {
-+ list_move(&qh->qh_list_entry,
-+ &hcd->periodic_sched_inactive);
-+ }
-+ }
-+ }
-+
-+ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
-+}
-+
-+/**
-+ * This function allocates and initializes a QTD.
-+ *
-+ * @param[in] urb The URB to create a QTD from. Each URB-QTD pair will end up
-+ * pointing to each other so each pair should have a unique correlation.
-+ *
-+ * @return Returns pointer to the newly allocated QTD, or NULL on error. */
-+dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb)
-+{
-+ dwc_otg_qtd_t *qtd;
-+
-+ qtd = dwc_otg_hcd_qtd_alloc ();
-+ if (qtd == NULL) {
-+ return NULL;
-+ }
-+
-+ dwc_otg_hcd_qtd_init (qtd, urb);
-+ return qtd;
-+}
-+
-+/**
-+ * Initializes a QTD structure.
-+ *
-+ * @param[in] qtd The QTD to initialize.
-+ * @param[in] urb The URB to use for initialization. */
-+void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb)
-+{
-+ memset (qtd, 0, sizeof (dwc_otg_qtd_t));
-+ qtd->urb = urb;
-+ if (usb_pipecontrol(urb->pipe)) {
-+ /*
-+ * The only time the QTD data toggle is used is on the data
-+ * phase of control transfers. This phase always starts with
-+ * DATA1.
-+ */
-+ qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
-+ qtd->control_phase = DWC_OTG_CONTROL_SETUP;
-+ }
-+
-+ /* start split */
-+ qtd->complete_split = 0;
-+ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
-+ qtd->isoc_split_offset = 0;
-+
-+ /* Store the qtd ptr in the urb to reference what QTD. */
-+ urb->hcpriv = qtd;
-+ return;
-+}
-+
-+/**
-+ * This function adds a QTD to the QTD-list of a QH. It will find the correct
-+ * QH to place the QTD into. If it does not find a QH, then it will create a
-+ * new QH. If the QH to which the QTD is added is not currently scheduled, it
-+ * is placed into the proper schedule based on its EP type.
-+ *
-+ * @param[in] qtd The QTD to add
-+ * @param[in] dwc_otg_hcd The DWC HCD structure
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd,
-+ dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ struct usb_host_endpoint *ep;
-+ dwc_otg_qh_t *qh;
-+ unsigned long flags;
-+ int retval = 0;
-+
-+ struct urb *urb = qtd->urb;
-+
-+ SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
-+
-+ /*
-+ * Get the QH which holds the QTD-list to insert to. Create QH if it
-+ * doesn't exist.
-+ */
-+ ep = dwc_urb_to_endpoint(urb);
-+ qh = (dwc_otg_qh_t *)ep->hcpriv;
-+ if (qh == NULL) {
-+ qh = dwc_otg_hcd_qh_create (dwc_otg_hcd, urb);
-+ if (qh == NULL) {
-+ goto done;
-+ }
-+ ep->hcpriv = qh;
-+ }
-+
-+ retval = dwc_otg_hcd_qh_add(dwc_otg_hcd, qh);
-+ if (retval == 0) {
-+ list_add_tail(&qtd->qtd_list_entry, &qh->qtd_list);
-+ }
-+
-+ done:
-+ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-+
-+ return retval;
-+}
-+
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_pcd.c
-@@ -0,0 +1,2542 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $
-+ * $Revision: #70 $
-+ * $Date: 2008/10/14 $
-+ * $Change: 1115682 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_HOST_ONLY
-+
-+/** @file
-+ * This file implements the Peripheral Controller Driver.
-+ *
-+ * The Peripheral Controller Driver (PCD) is responsible for
-+ * translating requests from the Function Driver into the appropriate
-+ * actions on the DWC_otg controller. It isolates the Function Driver
-+ * from the specifics of the controller by providing an API to the
-+ * Function Driver.
-+ *
-+ * The Peripheral Controller Driver for Linux will implement the
-+ * Gadget API, so that the existing Gadget drivers can be used.
-+ * (Gadget Driver is the Linux terminology for a Function Driver.)
-+ *
-+ * The Linux Gadget API is defined in the header file
-+ * <code><linux/usb_gadget.h></code>. The USB EP operations API is
-+ * defined in the structure <code>usb_ep_ops</code> and the USB
-+ * Controller API is defined in the structure
-+ * <code>usb_gadget_ops</code>.
-+ *
-+ * An important function of the PCD is managing interrupts generated
-+ * by the DWC_otg controller. The implementation of the DWC_otg device
-+ * mode interrupt service routines is in dwc_otg_pcd_intr.c.
-+ *
-+ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc).
-+ * @todo Does it work when the request size is greater than DEPTSIZ
-+ * transfer size
-+ *
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/string.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/version.h>
-+
-+//#include <asm/arch/lm.h>
-+#include <mach/lm.h>
-+#include <mach/irqs.h>
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
-+# include <linux/usb/ch9.h>
-+#else
-+# include <linux/usb_ch9.h>
-+#endif
-+
-+//#include <linux/usb_gadget.h>
-+
-+
-+
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_pcd.h"
-+
-+
-+
-+/**
-+ * Static PCD pointer for use in usb_gadget_register_driver and
-+ * usb_gadget_unregister_driver. Initialized in dwc_otg_pcd_init.
-+ */
-+static dwc_otg_pcd_t *s_pcd = 0;
-+
-+
-+/* Display the contents of the buffer */
-+extern void dump_msg(const u8 *buf, unsigned int length);
-+
-+
-+/**
-+ * This function completes a request. It call's the request call back.
-+ */
-+void dwc_otg_request_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_request_t *req,
-+ int status)
-+{
-+ unsigned stopped = ep->stopped;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, ep);
-+ list_del_init(&req->queue);
-+
-+ if (req->req.status == -EINPROGRESS) {
-+ req->req.status = status;
-+ } else {
-+ status = req->req.status;
-+ }
-+
-+ /* don't modify queue heads during completion callback */
-+ ep->stopped = 1;
-+ SPIN_UNLOCK(&ep->pcd->lock);
-+ req->req.complete(&ep->ep, &req->req);
-+ SPIN_LOCK(&ep->pcd->lock);
-+
-+ if (ep->pcd->request_pending > 0) {
-+ --ep->pcd->request_pending;
-+ }
-+
-+ ep->stopped = stopped;
-+}
-+
-+/**
-+ * This function terminates all the requsts in the EP request queue.
-+ */
-+void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *ep)
-+{
-+ dwc_otg_pcd_request_t *req;
-+
-+ ep->stopped = 1;
-+
-+ /* called with irqs blocked?? */
-+ while (!list_empty(&ep->queue)) {
-+ req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
-+ queue);
-+ dwc_otg_request_done(ep, req, -ESHUTDOWN);
-+ }
-+}
-+
-+/* USB Endpoint Operations */
-+/*
-+ * The following sections briefly describe the behavior of the Gadget
-+ * API endpoint operations implemented in the DWC_otg driver
-+ * software. Detailed descriptions of the generic behavior of each of
-+ * these functions can be found in the Linux header file
-+ * include/linux/usb_gadget.h.
-+ *
-+ * The Gadget API provides wrapper functions for each of the function
-+ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper
-+ * function, which then calls the underlying PCD function. The
-+ * following sections are named according to the wrapper
-+ * functions. Within each section, the corresponding DWC_otg PCD
-+ * function name is specified.
-+ *
-+ */
-+
-+/**
-+ * This function assigns periodic Tx FIFO to an periodic EP
-+ * in shared Tx FIFO mode
-+ */
-+static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t PerTxMsk = 1;
-+ int i;
-+ for(i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i)
-+ {
-+ if((PerTxMsk & core_if->p_tx_msk) == 0) {
-+ core_if->p_tx_msk |= PerTxMsk;
-+ return i + 1;
-+ }
-+ PerTxMsk <<= 1;
-+ }
-+ return 0;
-+}
-+/**
-+ * This function releases periodic Tx FIFO
-+ * in shared Tx FIFO mode
-+ */
-+static void release_perio_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num)
-+{
-+ core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk;
-+}
-+/**
-+ * This function assigns periodic Tx FIFO to an periodic EP
-+ * in shared Tx FIFO mode
-+ */
-+static uint32_t assign_tx_fifo(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t TxMsk = 1;
-+ int i;
-+
-+ for(i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i)
-+ {
-+ if((TxMsk & core_if->tx_msk) == 0) {
-+ core_if->tx_msk |= TxMsk;
-+ return i + 1;
-+ }
-+ TxMsk <<= 1;
-+ }
-+ return 0;
-+}
-+/**
-+ * This function releases periodic Tx FIFO
-+ * in shared Tx FIFO mode
-+ */
-+static void release_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num)
-+{
-+ core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk;
-+}
-+
-+/**
-+ * This function is called by the Gadget Driver for each EP to be
-+ * configured for the current configuration (SET_CONFIGURATION).
-+ *
-+ * This function initializes the dwc_otg_ep_t data structure, and then
-+ * calls dwc_otg_ep_activate.
-+ */
-+static int dwc_otg_pcd_ep_enable(struct usb_ep *usb_ep,
-+ const struct usb_endpoint_descriptor *ep_desc)
-+{
-+ dwc_otg_pcd_ep_t *ep = 0;
-+ dwc_otg_pcd_t *pcd = 0;
-+ unsigned long flags;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, ep_desc);
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+ if (!usb_ep || !ep_desc || ep->desc ||
-+ ep_desc->bDescriptorType != USB_DT_ENDPOINT) {
-+ DWC_WARN("%s, bad ep or descriptor\n", __func__);
-+ return -EINVAL;
-+ }
-+ if (ep == &ep->pcd->ep0) {
-+ DWC_WARN("%s, bad ep(0)\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ /* Check FIFO size? */
-+ if (!ep_desc->wMaxPacketSize) {
-+ DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name);
-+ return -ERANGE;
-+ }
-+
-+ pcd = ep->pcd;
-+ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DWC_WARN("%s, bogus device state\n", __func__);
-+ return -ESHUTDOWN;
-+ }
-+
-+ SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-+
-+ ep->desc = ep_desc;
-+ ep->ep.maxpacket = le16_to_cpu (ep_desc->wMaxPacketSize);
-+
-+ /*
-+ * Activate the EP
-+ */
-+ ep->stopped = 0;
-+
-+ ep->dwc_ep.is_in = (USB_DIR_IN & ep_desc->bEndpointAddress) != 0;
-+ ep->dwc_ep.maxpacket = ep->ep.maxpacket;
-+
-+ ep->dwc_ep.type = ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-+
-+ if(ep->dwc_ep.is_in) {
-+ if(!pcd->otg_dev->core_if->en_multiple_tx_fifo) {
-+ ep->dwc_ep.tx_fifo_num = 0;
-+
-+ if (ep->dwc_ep.type == USB_ENDPOINT_XFER_ISOC) {
-+ /*
-+ * if ISOC EP then assign a Periodic Tx FIFO.
-+ */
-+ ep->dwc_ep.tx_fifo_num = assign_perio_tx_fifo(pcd->otg_dev->core_if);
-+ }
-+ } else {
-+ /*
-+ * if Dedicated FIFOs mode is on then assign a Tx FIFO.
-+ */
-+ ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if);
-+
-+ }
-+ }
-+ /* Set initial data PID. */
-+ if (ep->dwc_ep.type == USB_ENDPOINT_XFER_BULK) {
-+ ep->dwc_ep.data_pid_start = 0;
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCD, "Activate %s-%s: type=%d, mps=%d desc=%p\n",
-+ ep->ep.name, (ep->dwc_ep.is_in ?"IN":"OUT"),
-+ ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc);
-+
-+ if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC) {
-+ ep->dwc_ep.desc_addr = dwc_otg_ep_alloc_desc_chain(&ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
-+ }
-+
-+ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function is called when an EP is disabled due to disconnect or
-+ * change in configuration. Any pending requests will terminate with a
-+ * status of -ESHUTDOWN.
-+ *
-+ * This function modifies the dwc_otg_ep_t data structure for this EP,
-+ * and then calls dwc_otg_ep_deactivate.
-+ */
-+static int dwc_otg_pcd_ep_disable(struct usb_ep *usb_ep)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_t *pcd = 0;
-+ unsigned long flags;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, usb_ep);
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+ if (!usb_ep || !ep->desc) {
-+ DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__,
-+ usb_ep ? ep->ep.name : NULL);
-+ return -EINVAL;
-+ }
-+
-+ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-+
-+ dwc_otg_request_nuke(ep);
-+
-+ dwc_otg_ep_deactivate(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
-+ ep->desc = 0;
-+ ep->stopped = 1;
-+
-+ if(ep->dwc_ep.is_in) {
-+ dwc_otg_flush_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
-+ release_perio_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
-+ release_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
-+ }
-+
-+ /* Free DMA Descriptors */
-+ pcd = ep->pcd;
-+
-+ SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
-+
-+ if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC && ep->dwc_ep.desc_addr) {
-+ dwc_otg_ep_free_desc_chain(ep->dwc_ep.desc_addr, ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCD, "%s disabled\n", usb_ep->name);
-+ return 0;
-+}
-+
-+
-+/**
-+ * This function allocates a request object to use with the specified
-+ * endpoint.
-+ *
-+ * @param ep The endpoint to be used with with the request
-+ * @param gfp_flags the GFP_* flags to use.
-+ */
-+static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ int gfp_flags
-+#else
-+ gfp_t gfp_flags
-+#endif
-+ )
-+{
-+ dwc_otg_pcd_request_t *req;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d)\n", __func__, ep, gfp_flags);
-+ if (0 == ep) {
-+ DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n");
-+ return 0;
-+ }
-+ req = kmalloc(sizeof(dwc_otg_pcd_request_t), gfp_flags);
-+ if (0 == req) {
-+ DWC_WARN("%s() %s\n", __func__,
-+ "request allocation failed!\n");
-+ return 0;
-+ }
-+ memset(req, 0, sizeof(dwc_otg_pcd_request_t));
-+ req->req.dma = DMA_ADDR_INVALID;
-+ INIT_LIST_HEAD(&req->queue);
-+ return &req->req;
-+}
-+
-+/**
-+ * This function frees a request object.
-+ *
-+ * @param ep The endpoint associated with the request
-+ * @param req The request being freed
-+ */
-+static void dwc_otg_pcd_free_request(struct usb_ep *ep,
-+ struct usb_request *req)
-+{
-+ dwc_otg_pcd_request_t *request;
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, ep, req);
-+
-+ if (0 == ep || 0 == req) {
-+ DWC_WARN("%s() %s\n", __func__,
-+ "Invalid ep or req argument!\n");
-+ return;
-+ }
-+
-+ request = container_of(req, dwc_otg_pcd_request_t, req);
-+ kfree(request);
-+}
-+
-+#if 0
-+/**
-+ * This function allocates an I/O buffer to be used for a transfer
-+ * to/from the specified endpoint.
-+ *
-+ * @param usb_ep The endpoint to be used with with the request
-+ * @param bytes The desired number of bytes for the buffer
-+ * @param dma Pointer to the buffer's DMA address; must be valid
-+ * @param gfp_flags the GFP_* flags to use.
-+ * @return address of a new buffer or null is buffer could not be allocated.
-+ */
-+static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes,
-+ dma_addr_t *dma,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ int gfp_flags
-+#else
-+ gfp_t gfp_flags
-+#endif
-+ )
-+{
-+ void *buf;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_t *pcd = 0;
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+ pcd = ep->pcd;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes,
-+ dma, gfp_flags);
-+
-+ /* Check dword alignment */
-+ if ((bytes & 0x3UL) != 0) {
-+ DWC_WARN("%s() Buffer size is not a multiple of"
-+ "DWORD size (%d)",__func__, bytes);
-+ }
-+
-+ if (GET_CORE_IF(pcd)->dma_enable) {
-+ buf = dma_alloc_coherent (NULL, bytes, dma, gfp_flags);
-+ }
-+ else {
-+ buf = kmalloc(bytes, gfp_flags);
-+ }
-+
-+ /* Check dword alignment */
-+ if (((int)buf & 0x3UL) != 0) {
-+ DWC_WARN("%s() Buffer is not DWORD aligned (%p)",
-+ __func__, buf);
-+ }
-+
-+ return buf;
-+}
-+
-+/**
-+ * This function frees an I/O buffer that was allocated by alloc_buffer.
-+ *
-+ * @param usb_ep the endpoint associated with the buffer
-+ * @param buf address of the buffer
-+ * @param dma The buffer's DMA address
-+ * @param bytes The number of bytes of the buffer
-+ */
-+static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf,
-+ dma_addr_t dma, unsigned bytes)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_t *pcd = 0;
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+ pcd = ep->pcd;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%0x,%d)\n", __func__, ep, buf, dma, bytes);
-+
-+ if (GET_CORE_IF(pcd)->dma_enable) {
-+ dma_free_coherent (NULL, bytes, buf, dma);
-+ }
-+ else {
-+ kfree(buf);
-+ }
-+}
-+#endif
-+
-+/**
-+ * This function is used to submit an I/O Request to an EP.
-+ *
-+ * - When the request completes the request's completion callback
-+ * is called to return the request to the driver.
-+ * - An EP, except control EPs, may have multiple requests
-+ * pending.
-+ * - Once submitted the request cannot be examined or modified.
-+ * - Each request is turned into one or more packets.
-+ * - A BULK EP can queue any amount of data; the transfer is
-+ * packetized.
-+ * - Zero length Packets are specified with the request 'zero'
-+ * flag.
-+ */
-+static int dwc_otg_pcd_ep_queue(struct usb_ep *usb_ep,
-+ struct usb_request *usb_req,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ int gfp_flags
-+#else
-+ gfp_t gfp_flags
-+#endif
-+ )
-+{
-+ int prevented = 0;
-+ dwc_otg_pcd_request_t *req;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_t *pcd;
-+ unsigned long flags = 0;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%d)\n",
-+ __func__, usb_ep, usb_req, gfp_flags);
-+
-+ req = container_of(usb_req, dwc_otg_pcd_request_t, req);
-+ if (!usb_req || !usb_req->complete || !usb_req->buf ||
-+ !list_empty(&req->queue)) {
-+ DWC_WARN("%s, bad params\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+ if (!usb_ep || (!ep->desc && ep->dwc_ep.num != 0)/* || ep->stopped != 0*/) {
-+ DWC_WARN("%s, bad ep\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ pcd = ep->pcd;
-+ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
-+ DWC_WARN("%s, bogus device state\n", __func__);
-+ return -ESHUTDOWN;
-+ }
-+
-+
-+ DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n",
-+ usb_ep->name, usb_req, usb_req->length, usb_req->buf);
-+
-+ if (!GET_CORE_IF(pcd)->core_params->opt) {
-+ if (ep->dwc_ep.num != 0) {
-+ DWC_ERROR("%s queue req %p, len %d buf %p\n",
-+ usb_ep->name, usb_req, usb_req->length, usb_req->buf);
-+ }
-+ }
-+
-+ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-+
-+#if defined(DEBUG) & defined(VERBOSE)
-+ dump_msg(usb_req->buf, usb_req->length);
-+#endif
-+
-+ usb_req->status = -EINPROGRESS;
-+ usb_req->actual = 0;
-+
-+ /*
-+ * For EP0 IN without premature status, zlp is required?
-+ */
-+ if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) {
-+ DWC_DEBUGPL(DBG_PCDV, "%s-OUT ZLP\n", usb_ep->name);
-+ //_req->zero = 1;
-+ }
-+
-+ /* Start the transfer */
-+ if (list_empty(&ep->queue) && !ep->stopped) {
-+ /* EP0 Transfer? */
-+ if (ep->dwc_ep.num == 0) {
-+ switch (pcd->ep0state) {
-+ case EP0_IN_DATA_PHASE:
-+ DWC_DEBUGPL(DBG_PCD,
-+ "%s ep0: EP0_IN_DATA_PHASE\n",
-+ __func__);
-+ break;
-+
-+ case EP0_OUT_DATA_PHASE:
-+ DWC_DEBUGPL(DBG_PCD,
-+ "%s ep0: EP0_OUT_DATA_PHASE\n",
-+ __func__);
-+ if (pcd->request_config) {
-+ /* Complete STATUS PHASE */
-+ ep->dwc_ep.is_in = 1;
-+ pcd->ep0state = EP0_IN_STATUS_PHASE;
-+ }
-+ break;
-+
-+ case EP0_IN_STATUS_PHASE:
-+ DWC_DEBUGPL(DBG_PCD,
-+ "%s ep0: EP0_IN_STATUS_PHASE\n",
-+ __func__);
-+ break;
-+
-+ default:
-+ DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n",
-+ pcd->ep0state);
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+ return -EL2HLT;
-+ }
-+ ep->dwc_ep.dma_addr = usb_req->dma;
-+ ep->dwc_ep.start_xfer_buff = usb_req->buf;
-+ ep->dwc_ep.xfer_buff = usb_req->buf;
-+ ep->dwc_ep.xfer_len = usb_req->length;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
-+
-+ if(usb_req->zero) {
-+ if((ep->dwc_ep.xfer_len % ep->dwc_ep.maxpacket == 0)
-+ && (ep->dwc_ep.xfer_len != 0)) {
-+ ep->dwc_ep.sent_zlp = 1;
-+ }
-+
-+ }
-+
-+ ep_check_and_patch_dma_addr(ep);
-+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
-+ }
-+ else {
-+
-+ uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
-+
-+ /* Setup and start the Transfer */
-+ ep->dwc_ep.dma_addr = usb_req->dma;
-+ ep->dwc_ep.start_xfer_buff = usb_req->buf;
-+ ep->dwc_ep.xfer_buff = usb_req->buf;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = usb_req->length;
-+ ep->dwc_ep.xfer_len = 0;
-+ ep->dwc_ep.xfer_count = 0;
-+
-+ if(max_transfer > MAX_TRANSFER_SIZE) {
-+ ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
-+ } else {
-+ ep->dwc_ep.maxxfer = max_transfer;
-+ }
-+
-+ if(usb_req->zero) {
-+ if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
-+ && (ep->dwc_ep.total_len != 0)) {
-+ ep->dwc_ep.sent_zlp = 1;
-+ }
-+
-+ }
-+
-+ ep_check_and_patch_dma_addr(ep);
-+ dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
-+ }
-+ }
-+
-+ if ((req != 0) || prevented) {
-+ ++pcd->request_pending;
-+ list_add_tail(&req->queue, &ep->queue);
-+ if (ep->dwc_ep.is_in && ep->stopped && !(GET_CORE_IF(pcd)->dma_enable)) {
-+ /** @todo NGS Create a function for this. */
-+ diepmsk_data_t diepmsk = { .d32 = 0};
-+ diepmsk.b.intktxfemp = 1;
-+ if(&GET_CORE_IF(pcd)->multiproc_int_enable) {
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepeachintmsk[ep->dwc_ep.num],
-+ 0, diepmsk.d32);
-+ } else {
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32);
-+ }
-+ }
-+ }
-+
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+ return 0;
-+}
-+
-+/**
-+ * This function cancels an I/O request from an EP.
-+ */
-+static int dwc_otg_pcd_ep_dequeue(struct usb_ep *usb_ep,
-+ struct usb_request *usb_req)
-+{
-+ dwc_otg_pcd_request_t *req;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_t *pcd;
-+ unsigned long flags;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, usb_req);
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+ if (!usb_ep || !usb_req || (!ep->desc && ep->dwc_ep.num != 0)) {
-+ DWC_WARN("%s, bad argument\n", __func__);
-+ return -EINVAL;
-+ }
-+ pcd = ep->pcd;
-+ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DWC_WARN("%s, bogus device state\n", __func__);
-+ return -ESHUTDOWN;
-+ }
-+
-+ SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-+ DWC_DEBUGPL(DBG_PCDV, "%s %s %s %p\n", __func__, usb_ep->name,
-+ ep->dwc_ep.is_in ? "IN" : "OUT",
-+ usb_req);
-+
-+ /* make sure it's actually queued on this endpoint */
-+ list_for_each_entry(req, &ep->queue, queue)
-+ {
-+ if (&req->req == usb_req) {
-+ break;
-+ }
-+ }
-+
-+ if (&req->req != usb_req) {
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+ return -EINVAL;
-+ }
-+
-+ if (!list_empty(&req->queue)) {
-+ dwc_otg_request_done(ep, req, -ECONNRESET);
-+ }
-+ else {
-+ req = 0;
-+ }
-+
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+
-+ return req ? 0 : -EOPNOTSUPP;
-+}
-+
-+/**
-+ * usb_ep_set_halt stalls an endpoint.
-+ *
-+ * usb_ep_clear_halt clears an endpoint halt and resets its data
-+ * toggle.
-+ *
-+ * Both of these functions are implemented with the same underlying
-+ * function. The behavior depends on the value argument.
-+ *
-+ * @param[in] usb_ep the Endpoint to halt or clear halt.
-+ * @param[in] value
-+ * - 0 means clear_halt.
-+ * - 1 means set_halt,
-+ * - 2 means clear stall lock flag.
-+ * - 3 means set stall lock flag.
-+ */
-+static int dwc_otg_pcd_ep_set_halt(struct usb_ep *usb_ep, int value)
-+{
-+ int retval = 0;
-+ unsigned long flags;
-+ dwc_otg_pcd_ep_t *ep = 0;
-+
-+
-+ DWC_DEBUGPL(DBG_PCD,"HALT %s %d\n", usb_ep->name, value);
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+
-+ if (!usb_ep || (!ep->desc && ep != &ep->pcd->ep0) ||
-+ ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
-+ DWC_WARN("%s, bad ep\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-+ if (!list_empty(&ep->queue)) {
-+ DWC_WARN("%s() %s XFer In process\n", __func__, usb_ep->name);
-+ retval = -EAGAIN;
-+ }
-+ else if (value == 0) {
-+ dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if,
-+ &ep->dwc_ep);
-+ }
-+ else if(value == 1) {
-+ if (ep->dwc_ep.is_in == 1 && ep->pcd->otg_dev->core_if->dma_desc_enable) {
-+ dtxfsts_data_t txstatus;
-+ fifosize_data_t txfifosize;
-+
-+ txfifosize.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->core_global_regs->dptxfsiz_dieptxf[ep->dwc_ep.tx_fifo_num]);
-+ txstatus.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->dev_if->in_ep_regs[ep->dwc_ep.num]->dtxfsts);
-+
-+ if(txstatus.b.txfspcavail < txfifosize.b.depth) {
-+ DWC_WARN("%s() %s Data In Tx Fifo\n", __func__, usb_ep->name);
-+ retval = -EAGAIN;
-+ }
-+ else {
-+ if (ep->dwc_ep.num == 0) {
-+ ep->pcd->ep0state = EP0_STALL;
-+ }
-+
-+ ep->stopped = 1;
-+ dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
-+ &ep->dwc_ep);
-+ }
-+ }
-+ else {
-+ if (ep->dwc_ep.num == 0) {
-+ ep->pcd->ep0state = EP0_STALL;
-+ }
-+
-+ ep->stopped = 1;
-+ dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
-+ &ep->dwc_ep);
-+ }
-+ }
-+ else if (value == 2) {
-+ ep->dwc_ep.stall_clear_flag = 0;
-+ }
-+ else if (value == 3) {
-+ ep->dwc_ep.stall_clear_flag = 1;
-+ }
-+
-+ SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
-+ return retval;
-+}
-+
-+/**
-+ * This function allocates a DMA Descriptor chain for the Endpoint
-+ * buffer to be used for a transfer to/from the specified endpoint.
-+ */
-+dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count)
-+{
-+
-+ return dma_alloc_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), dma_desc_addr, GFP_KERNEL);
-+}
-+
-+LIST_HEAD(tofree_list);
-+spinlock_t tofree_list_lock=SPIN_LOCK_UNLOCKED;
-+
-+struct free_param {
-+ struct list_head list;
-+
-+ void* addr;
-+ dma_addr_t dma_addr;
-+ uint32_t size;
-+};
-+void free_list_agent_fn(void *data){
-+ struct list_head free_list;
-+ struct free_param *cur,*next;
-+
-+ spin_lock(&tofree_list_lock);
-+ list_add(&free_list,&tofree_list);
-+ list_del_init(&tofree_list);
-+ spin_unlock(&tofree_list_lock);
-+
-+ list_for_each_entry_safe(cur,next,&free_list,list){
-+ if(cur==&free_list) break;
-+ dma_free_coherent(NULL,cur->size,cur->addr,cur->dma_addr);
-+ list_del(&cur->list);
-+ kfree(cur);
-+ }
-+}
-+DECLARE_WORK(free_list_agent,free_list_agent_fn);
-+/**
-+ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc.
-+ */
-+void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count)
-+{
-+ if(irqs_disabled()){
-+ struct free_param* fp=kmalloc(sizeof(struct free_param),GFP_KERNEL);
-+ fp->addr=desc_addr;
-+ fp->dma_addr=dma_desc_addr;
-+ fp->size=count*sizeof(dwc_otg_dma_desc_t);
-+
-+ spin_lock(&tofree_list_lock);
-+ list_add(&fp->list,&tofree_list);
-+ spin_unlock(&tofree_list_lock);
-+
-+ schedule_work(&free_list_agent);
-+ return ;
-+ }
-+ dma_free_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), desc_addr, dma_desc_addr);
-+}
-+
-+#ifdef DWC_EN_ISOC
-+
-+/**
-+ * This function initializes a descriptor chain for Isochronous transfer
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dwc_ep The EP to start the transfer on.
-+ *
-+ */
-+void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-+{
-+
-+ dsts_data_t dsts = { .d32 = 0};
-+ depctl_data_t depctl = { .d32 = 0 };
-+ volatile uint32_t *addr;
-+ int i, j;
-+
-+ if(dwc_ep->is_in)
-+ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval;
-+ else
-+ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
-+
-+
-+ /** Allocate descriptors for double buffering */
-+ dwc_ep->iso_desc_addr = dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,dwc_ep->desc_cnt*2);
-+ if(dwc_ep->desc_addr) {
-+ DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__);
-+ return;
-+ }
-+
-+ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ /** ISO OUT EP */
-+ if(dwc_ep->is_in == 0) {
-+ desc_sts_data_t sts = { .d32 =0 };
-+ dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
-+ dma_addr_t dma_ad;
-+ uint32_t data_per_desc;
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[dwc_ep->num];
-+ int offset;
-+
-+ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
-+ dma_ad = (dma_addr_t)dwc_read_reg32(&(out_regs->doepdma));
-+
-+ /** Buffer 0 descriptors setup */
-+ dma_ad = dwc_ep->dma_addr0;
-+
-+ sts.b_iso_out.bs = BS_HOST_READY;
-+ sts.b_iso_out.rxsts = 0;
-+ sts.b_iso_out.l = 0;
-+ sts.b_iso_out.sp = 0;
-+ sts.b_iso_out.ioc = 0;
-+ sts.b_iso_out.pid = 0;
-+ sts.b_iso_out.framenum = 0;
-+
-+ offset = 0;
-+ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-+ {
-+
-+ for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
-+ {
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ offset += data_per_desc;
-+ dma_desc ++;
-+ //(uint32_t)dma_ad += data_per_desc;
-+ dma_ad = (uint32_t)dma_ad + data_per_desc;
-+ }
-+ }
-+
-+ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
-+ {
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ offset += data_per_desc;
-+ dma_desc ++;
-+ //(uint32_t)dma_ad += data_per_desc;
-+ dma_ad = (uint32_t)dma_ad + data_per_desc;
-+ }
-+
-+ sts.b_iso_out.ioc = 1;
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+ dma_desc ++;
-+
-+ /** Buffer 1 descriptors setup */
-+ sts.b_iso_out.ioc = 0;
-+ dma_ad = dwc_ep->dma_addr1;
-+
-+ offset = 0;
-+ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-+ {
-+ for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
-+ {
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ offset += data_per_desc;
-+ dma_desc ++;
-+ //(uint32_t)dma_ad += data_per_desc;
-+ dma_ad = (uint32_t)dma_ad + data_per_desc;
-+ }
-+ }
-+ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
-+ {
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ offset += data_per_desc;
-+ dma_desc ++;
-+ //(uint32_t)dma_ad += data_per_desc;
-+ dma_ad = (uint32_t)dma_ad + data_per_desc;
-+ }
-+
-+ sts.b_iso_out.ioc = 1;
-+ sts.b_iso_out.l = 1;
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ dwc_ep->next_frame = 0;
-+
-+ /** Write dma_ad into DOEPDMA register */
-+ dwc_write_reg32(&(out_regs->doepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
-+
-+ }
-+ /** ISO IN EP */
-+ else {
-+ desc_sts_data_t sts = { .d32 =0 };
-+ dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
-+ dma_addr_t dma_ad;
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[dwc_ep->num];
-+ unsigned int frmnumber;
-+ fifosize_data_t txfifosize,rxfifosize;
-+
-+ txfifosize.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->dtxfsts);
-+ rxfifosize.d32 = dwc_read_reg32(&core_if->core_global_regs->grxfsiz);
-+
-+
-+ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
-+
-+ dma_ad = dwc_ep->dma_addr0;
-+
-+ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ sts.b_iso_in.bs = BS_HOST_READY;
-+ sts.b_iso_in.txsts = 0;
-+ sts.b_iso_in.sp = (dwc_ep->data_per_frame % dwc_ep->maxpacket)? 1 : 0;
-+ sts.b_iso_in.ioc = 0;
-+ sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
-+
-+
-+ frmnumber = dwc_ep->next_frame;
-+
-+ sts.b_iso_in.framenum = frmnumber;
-+ sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
-+ sts.b_iso_in.l = 0;
-+
-+ /** Buffer 0 descriptors setup */
-+ for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
-+ {
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+ dma_desc ++;
-+
-+ //(uint32_t)dma_ad += dwc_ep->data_per_frame;
-+ dma_ad = (uint32_t)dma_ad + dwc_ep->data_per_frame;
-+ sts.b_iso_in.framenum += dwc_ep->bInterval;
-+ }
-+
-+ sts.b_iso_in.ioc = 1;
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+ ++dma_desc;
-+
-+ /** Buffer 1 descriptors setup */
-+ sts.b_iso_in.ioc = 0;
-+ dma_ad = dwc_ep->dma_addr1;
-+
-+ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-+ {
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+ dma_desc ++;
-+
-+ //(uint32_t)dma_ad += dwc_ep->data_per_frame;
-+ dma_ad = (uint32_t)dma_ad + dwc_ep->data_per_frame;
-+ sts.b_iso_in.framenum += dwc_ep->bInterval;
-+
-+ sts.b_iso_in.ioc = 0;
-+ }
-+ sts.b_iso_in.ioc = 1;
-+ sts.b_iso_in.l = 1;
-+
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval;
-+
-+ /** Write dma_ad into diepdma register */
-+ dwc_write_reg32(&(in_regs->diepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
-+ }
-+ /** Enable endpoint, clear nak */
-+ depctl.d32 = 0;
-+ depctl.b.epena = 1;
-+ depctl.b.usbactep = 1;
-+ depctl.b.cnak = 1;
-+
-+ dwc_modify_reg32(addr, depctl.d32,depctl.d32);
-+ depctl.d32 = dwc_read_reg32(addr);
-+}
-+
-+/**
-+ * This function initializes a descriptor chain for Isochronous transfer
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+
-+void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl = { .d32 = 0 };
-+ volatile uint32_t *addr;
-+
-+
-+ if(ep->is_in) {
-+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-+ } else {
-+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-+ }
-+
-+
-+ if(core_if->dma_enable == 0 || core_if->dma_desc_enable!= 0) {
-+ return;
-+ } else {
-+ deptsiz_data_t deptsiz = { .d32 = 0 };
-+
-+ ep->xfer_len = ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval;
-+ ep->pkt_cnt = (ep->xfer_len - 1 + ep->maxpacket) /
-+ ep->maxpacket;
-+ ep->xfer_count = 0;
-+ ep->xfer_buff = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
-+ ep->dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
-+
-+ if(ep->is_in) {
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ deptsiz.b.mc = ep->pkt_per_frm;
-+ deptsiz.b.xfersize = ep->xfer_len;
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len - 1 + ep->maxpacket) /
-+ ep->maxpacket;
-+ dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
-+
-+ } else {
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len + (ep->maxpacket - 1)) /
-+ ep->maxpacket;
-+ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
-+
-+ dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma), (uint32_t)ep->dma_addr);
-+
-+ }
-+ /** Enable endpoint, clear nak */
-+ depctl.d32 = 0;
-+ dwc_modify_reg32(addr, depctl.d32,depctl.d32);
-+
-+ depctl.b.epena = 1;
-+ depctl.b.cnak = 1;
-+
-+ dwc_modify_reg32(addr, depctl.d32,depctl.d32);
-+ }
-+}
-+
-+
-+/**
-+ * This function does the setup for a data transfer for an EP and
-+ * starts the transfer. For an IN transfer, the packets will be
-+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
-+ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ */
-+
-+void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ if(core_if->dma_enable) {
-+ if(core_if->dma_desc_enable) {
-+ if(ep->is_in) {
-+ ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm;
-+ } else {
-+ ep->desc_cnt = ep->pkt_cnt;
-+ }
-+ dwc_otg_iso_ep_start_ddma_transfer(core_if, ep);
-+ } else {
-+ if(core_if->pti_enh_enable) {
-+ dwc_otg_iso_ep_start_buf_transfer(core_if, ep);
-+ } else {
-+ ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
-+ ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
-+ dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
-+ }
-+ }
-+ } else {
-+ ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
-+ ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
-+ dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
-+ }
-+}
-+
-+/**
-+ * This function does the setup for a data transfer for an EP and
-+ * starts the transfer. For an IN transfer, the packets will be
-+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
-+ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ */
-+
-+void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl = { .d32 = 0 };
-+ volatile uint32_t *addr;
-+
-+ if(ep->is_in == 1) {
-+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-+ }
-+ else {
-+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-+ }
-+
-+ /* disable the ep */
-+ depctl.d32 = dwc_read_reg32(addr);
-+
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+
-+ dwc_write_reg32(addr, depctl.d32);
-+
-+ if(core_if->dma_desc_enable &&
-+ ep->iso_desc_addr && ep->iso_dma_desc_addr) {
-+ dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,ep->iso_dma_desc_addr,ep->desc_cnt * 2);
-+ }
-+
-+ /* reset varibales */
-+ ep->dma_addr0 = 0;
-+ ep->dma_addr1 = 0;
-+ ep->xfer_buff0 = 0;
-+ ep->xfer_buff1 = 0;
-+ ep->data_per_frame = 0;
-+ ep->data_pattern_frame = 0;
-+ ep->sync_frame = 0;
-+ ep->buf_proc_intrvl = 0;
-+ ep->bInterval = 0;
-+ ep->proc_buf_num = 0;
-+ ep->pkt_per_frm = 0;
-+ ep->pkt_per_frm = 0;
-+ ep->desc_cnt = 0;
-+ ep->iso_desc_addr = 0;
-+ ep->iso_dma_desc_addr = 0;
-+}
-+
-+
-+/**
-+ * This function is used to submit an ISOC Transfer Request to an EP.
-+ *
-+ * - Every time a sync period completes the request's completion callback
-+ * is called to provide data to the gadget driver.
-+ * - Once submitted the request cannot be modified.
-+ * - Each request is turned into periodic data packets untill ISO
-+ * Transfer is stopped..
-+ */
-+static int dwc_otg_pcd_iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ int gfp_flags
-+#else
-+ gfp_t gfp_flags
-+#endif
-+)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_t *pcd;
-+ dwc_ep_t *dwc_ep;
-+ unsigned long flags = 0;
-+ int32_t frm_data;
-+ dwc_otg_core_if_t *core_if;
-+ dcfg_data_t dcfg;
-+ dsts_data_t dsts;
-+
-+
-+ if (!req || !req->process_buffer || !req->buf0 || !req->buf1) {
-+ DWC_WARN("%s, bad params\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+
-+ if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
-+ DWC_WARN("%s, bad ep\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ pcd = ep->pcd;
-+ core_if = GET_CORE_IF(pcd);
-+
-+ dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
-+
-+ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
-+ DWC_WARN("%s, bogus device state\n", __func__);
-+ return -ESHUTDOWN;
-+ }
-+
-+ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-+
-+ dwc_ep = &ep->dwc_ep;
-+
-+ if(ep->iso_req) {
-+ DWC_WARN("%s, iso request in progress\n", __func__);
-+ }
-+ req->status = -EINPROGRESS;
-+
-+ dwc_ep->dma_addr0 = req->dma0;
-+ dwc_ep->dma_addr1 = req->dma1;
-+
-+ dwc_ep->xfer_buff0 = req->buf0;
-+ dwc_ep->xfer_buff1 = req->buf1;
-+
-+ ep->iso_req = req;
-+
-+ dwc_ep->data_per_frame = req->data_per_frame;
-+
-+ /** @todo - pattern data support is to be implemented in the future */
-+ dwc_ep->data_pattern_frame = req->data_pattern_frame;
-+ dwc_ep->sync_frame = req->sync_frame;
-+
-+ dwc_ep->buf_proc_intrvl = req->buf_proc_intrvl;
-+
-+ dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1);
-+
-+ dwc_ep->proc_buf_num = 0;
-+
-+ dwc_ep->pkt_per_frm = 0;
-+ frm_data = ep->dwc_ep.data_per_frame;
-+ while(frm_data > 0) {
-+ dwc_ep->pkt_per_frm++;
-+ frm_data -= ep->dwc_ep.maxpacket;
-+ }
-+
-+ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ if(req->flags & USB_REQ_ISO_ASAP) {
-+ dwc_ep->next_frame = dsts.b.soffn + 1;
-+ if(dwc_ep->bInterval != 1){
-+ dwc_ep->next_frame = dwc_ep->next_frame + (dwc_ep->bInterval - 1 - dwc_ep->next_frame % dwc_ep->bInterval);
-+ }
-+ } else {
-+ dwc_ep->next_frame = req->start_frame;
-+ }
-+
-+
-+ if(!core_if->pti_enh_enable) {
-+ dwc_ep->pkt_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
-+ } else {
-+ dwc_ep->pkt_cnt =
-+ (dwc_ep->data_per_frame * (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval)
-+ - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket;
-+ }
-+
-+ if(core_if->dma_desc_enable) {
-+ dwc_ep->desc_cnt =
-+ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
-+ }
-+
-+ dwc_ep->pkt_info = kmalloc(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt, GFP_KERNEL);
-+ if(!dwc_ep->pkt_info) {
-+ return -ENOMEM;
-+ }
-+ if(core_if->pti_enh_enable) {
-+ memset(dwc_ep->pkt_info, 0, sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
-+ }
-+
-+ dwc_ep->cur_pkt = 0;
-+
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+
-+ dwc_otg_iso_ep_start_transfer(core_if, dwc_ep);
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function stops ISO EP Periodic Data Transfer.
-+ */
-+static int dwc_otg_pcd_iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_t *pcd;
-+ dwc_ep_t *dwc_ep;
-+ unsigned long flags;
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+
-+ if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
-+ DWC_WARN("%s, bad ep\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ pcd = ep->pcd;
-+
-+ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
-+ DWC_WARN("%s, bogus device state\n", __func__);
-+ return -ESHUTDOWN;
-+ }
-+
-+ dwc_ep = &ep->dwc_ep;
-+
-+ dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep);
-+
-+ kfree(dwc_ep->pkt_info);
-+
-+ SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-+
-+ if(ep->iso_req != req) {
-+ return -EINVAL;
-+ }
-+
-+ req->status = -ECONNRESET;
-+
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+
-+
-+ ep->iso_req = 0;
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function is used for perodical data exchnage between PCD and gadget drivers.
-+ * for Isochronous EPs
-+ *
-+ * - Every time a sync period completes this function is called to
-+ * perform data exchange between PCD and gadget
-+ */
-+void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req)
-+{
-+ int i;
-+ struct usb_gadget_iso_packet_descriptor *iso_packet;
-+ dwc_ep_t *dwc_ep;
-+
-+ dwc_ep = &ep->dwc_ep;
-+
-+ if(ep->iso_req->status == -ECONNRESET) {
-+ DWC_PRINT("Device has already disconnected\n");
-+ /*Device has been disconnected*/
-+ return;
-+ }
-+
-+ if(dwc_ep->proc_buf_num != 0) {
-+ iso_packet = ep->iso_req->iso_packet_desc0;
-+ }
-+
-+ else {
-+ iso_packet = ep->iso_req->iso_packet_desc1;
-+ }
-+
-+ /* Fill in ISOC packets descriptors & pass to gadget driver*/
-+
-+ for(i = 0; i < dwc_ep->pkt_cnt; ++i) {
-+ iso_packet[i].status = dwc_ep->pkt_info[i].status;
-+ iso_packet[i].offset = dwc_ep->pkt_info[i].offset;
-+ iso_packet[i].actual_length = dwc_ep->pkt_info[i].length;
-+ dwc_ep->pkt_info[i].status = 0;
-+ dwc_ep->pkt_info[i].offset = 0;
-+ dwc_ep->pkt_info[i].length = 0;
-+ }
-+
-+ /* Call callback function to process data buffer */
-+ ep->iso_req->status = 0;/* success */
-+
-+ SPIN_UNLOCK(&ep->pcd->lock);
-+ ep->iso_req->process_buffer(&ep->ep, ep->iso_req);
-+ SPIN_LOCK(&ep->pcd->lock);
-+}
-+
-+
-+static struct usb_iso_request *dwc_otg_pcd_alloc_iso_request(struct usb_ep *ep,int packets,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ int gfp_flags
-+#else
-+ gfp_t gfp_flags
-+#endif
-+)
-+{
-+ struct usb_iso_request *pReq = NULL;
-+ uint32_t req_size;
-+
-+
-+ req_size = sizeof(struct usb_iso_request);
-+ req_size += (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor)));
-+
-+
-+ pReq = kmalloc(req_size, gfp_flags);
-+ if (!pReq) {
-+ DWC_WARN("%s, can't allocate Iso Request\n", __func__);
-+ return 0;
-+ }
-+ pReq->iso_packet_desc0 = (void*) (pReq + 1);
-+
-+ pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets;
-+
-+ return pReq;
-+}
-+
-+static void dwc_otg_pcd_free_iso_request(struct usb_ep *ep, struct usb_iso_request *req)
-+{
-+ kfree(req);
-+}
-+
-+static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops =
-+{
-+ .ep_ops =
-+ {
-+ .enable = dwc_otg_pcd_ep_enable,
-+ .disable = dwc_otg_pcd_ep_disable,
-+
-+ .alloc_request = dwc_otg_pcd_alloc_request,
-+ .free_request = dwc_otg_pcd_free_request,
-+
-+ //.alloc_buffer = dwc_otg_pcd_alloc_buffer,
-+ //.free_buffer = dwc_otg_pcd_free_buffer,
-+
-+ .queue = dwc_otg_pcd_ep_queue,
-+ .dequeue = dwc_otg_pcd_ep_dequeue,
-+
-+ .set_halt = dwc_otg_pcd_ep_set_halt,
-+ .fifo_status = 0,
-+ .fifo_flush = 0,
-+ },
-+ .iso_ep_start = dwc_otg_pcd_iso_ep_start,
-+ .iso_ep_stop = dwc_otg_pcd_iso_ep_stop,
-+ .alloc_iso_request = dwc_otg_pcd_alloc_iso_request,
-+ .free_iso_request = dwc_otg_pcd_free_iso_request,
-+};
-+
-+#else
-+
-+
-+static struct usb_ep_ops dwc_otg_pcd_ep_ops =
-+{
-+ .enable = dwc_otg_pcd_ep_enable,
-+ .disable = dwc_otg_pcd_ep_disable,
-+
-+ .alloc_request = dwc_otg_pcd_alloc_request,
-+ .free_request = dwc_otg_pcd_free_request,
-+
-+// .alloc_buffer = dwc_otg_pcd_alloc_buffer,
-+// .free_buffer = dwc_otg_pcd_free_buffer,
-+
-+ .queue = dwc_otg_pcd_ep_queue,
-+ .dequeue = dwc_otg_pcd_ep_dequeue,
-+
-+ .set_halt = dwc_otg_pcd_ep_set_halt,
-+ .fifo_status = 0,
-+ .fifo_flush = 0,
-+
-+
-+};
-+
-+#endif /* DWC_EN_ISOC */
-+/* Gadget Operations */
-+/**
-+ * The following gadget operations will be implemented in the DWC_otg
-+ * PCD. Functions in the API that are not described below are not
-+ * implemented.
-+ *
-+ * The Gadget API provides wrapper functions for each of the function
-+ * pointers defined in usb_gadget_ops. The Gadget Driver calls the
-+ * wrapper function, which then calls the underlying PCD function. The
-+ * following sections are named according to the wrapper functions
-+ * (except for ioctl, which doesn't have a wrapper function). Within
-+ * each section, the corresponding DWC_otg PCD function name is
-+ * specified.
-+ *
-+ */
-+
-+/**
-+ *Gets the USB Frame number of the last SOF.
-+ */
-+static int dwc_otg_pcd_get_frame(struct usb_gadget *gadget)
-+{
-+ dwc_otg_pcd_t *pcd;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
-+
-+ if (gadget == 0) {
-+ return -ENODEV;
-+ }
-+ else {
-+ pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
-+ dwc_otg_get_frame_number(GET_CORE_IF(pcd));
-+ }
-+
-+ return 0;
-+}
-+
-+void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd)
-+{
-+ uint32_t *addr = (uint32_t *)&(GET_CORE_IF(pcd)->core_global_regs->gotgctl);
-+ gotgctl_data_t mem;
-+ gotgctl_data_t val;
-+
-+ val.d32 = dwc_read_reg32(addr);
-+ if (val.b.sesreq) {
-+ DWC_ERROR("Session Request Already active!\n");
-+ return;
-+ }
-+
-+ DWC_NOTICE("Session Request Initated\n");
-+ mem.d32 = dwc_read_reg32(addr);
-+ mem.b.sesreq = 1;
-+ dwc_write_reg32(addr, mem.d32);
-+
-+ /* Start the SRP timer */
-+ dwc_otg_pcd_start_srp_timer(pcd);
-+ return;
-+}
-+
-+void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set)
-+{
-+ dctl_data_t dctl = {.d32=0};
-+ volatile uint32_t *addr = &(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dctl);
-+
-+ if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
-+ if (pcd->remote_wakeup_enable) {
-+ if (set) {
-+ dctl.b.rmtwkupsig = 1;
-+ dwc_modify_reg32(addr, 0, dctl.d32);
-+ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
-+ mdelay(1);
-+ dwc_modify_reg32(addr, dctl.d32, 0);
-+ DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n");
-+ }
-+ else {
-+ }
-+ }
-+ else {
-+ DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n");
-+ }
-+ }
-+ return;
-+}
-+
-+/**
-+ * Initiates Session Request Protocol (SRP) to wakeup the host if no
-+ * session is in progress. If a session is already in progress, but
-+ * the device is suspended, remote wakeup signaling is started.
-+ *
-+ */
-+static int dwc_otg_pcd_wakeup(struct usb_gadget *gadget)
-+{
-+ unsigned long flags;
-+ dwc_otg_pcd_t *pcd;
-+ dsts_data_t dsts;
-+ gotgctl_data_t gotgctl;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
-+
-+ if (gadget == 0) {
-+ return -ENODEV;
-+ }
-+ else {
-+ pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
-+ }
-+ SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-+
-+ /*
-+ * This function starts the Protocol if no session is in progress. If
-+ * a session is already in progress, but the device is suspended,
-+ * remote wakeup signaling is started.
-+ */
-+
-+ /* Check if valid session */
-+ gotgctl.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl));
-+ if (gotgctl.b.bsesvld) {
-+ /* Check if suspend state */
-+ dsts.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts));
-+ if (dsts.b.suspsts) {
-+ dwc_otg_pcd_remote_wakeup(pcd, 1);
-+ }
-+ }
-+ else {
-+ dwc_otg_pcd_initiate_srp(pcd);
-+ }
-+
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+ return 0;
-+}
-+
-+static const struct usb_gadget_ops dwc_otg_pcd_ops =
-+{
-+ .get_frame = dwc_otg_pcd_get_frame,
-+ .wakeup = dwc_otg_pcd_wakeup,
-+ // current versions must always be self-powered
-+};
-+
-+/**
-+ * This function updates the otg values in the gadget structure.
-+ */
-+void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *pcd, const unsigned reset)
-+{
-+
-+ if (!pcd->gadget.is_otg)
-+ return;
-+
-+ if (reset) {
-+ pcd->b_hnp_enable = 0;
-+ pcd->a_hnp_support = 0;
-+ pcd->a_alt_hnp_support = 0;
-+ }
-+
-+ pcd->gadget.b_hnp_enable = pcd->b_hnp_enable;
-+ pcd->gadget.a_hnp_support = pcd->a_hnp_support;
-+ pcd->gadget.a_alt_hnp_support = pcd->a_alt_hnp_support;
-+}
-+
-+/**
-+ * This function is the top level PCD interrupt handler.
-+ */
-+static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
-+ , struct pt_regs *r
-+#endif
-+ )
-+{
-+ dwc_otg_pcd_t *pcd = dev;
-+ int32_t retval = IRQ_NONE;
-+
-+ retval = dwc_otg_pcd_handle_intr(pcd);
-+ return IRQ_RETVAL(retval);
-+}
-+
-+/**
-+ * PCD Callback function for initializing the PCD when switching to
-+ * device mode.
-+ *
-+ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
-+ */
-+static int32_t dwc_otg_pcd_start_cb(void *p)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-+
-+ /*
-+ * Initialized the Core for Device mode.
-+ */
-+ if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
-+ dwc_otg_core_dev_init(GET_CORE_IF(pcd));
-+ }
-+ return 1;
-+}
-+
-+/**
-+ * PCD Callback function for stopping the PCD when switching to Host
-+ * mode.
-+ *
-+ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
-+ */
-+static int32_t dwc_otg_pcd_stop_cb(void *p)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-+ extern void dwc_otg_pcd_stop(dwc_otg_pcd_t *_pcd);
-+
-+ dwc_otg_pcd_stop(pcd);
-+ return 1;
-+}
-+
-+
-+/**
-+ * PCD Callback function for notifying the PCD when resuming from
-+ * suspend.
-+ *
-+ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
-+ */
-+static int32_t dwc_otg_pcd_suspend_cb(void *p)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-+
-+ if (pcd->driver && pcd->driver->resume) {
-+ SPIN_UNLOCK(&pcd->lock);
-+ pcd->driver->suspend(&pcd->gadget);
-+ SPIN_LOCK(&pcd->lock);
-+ }
-+
-+ return 1;
-+}
-+
-+
-+/**
-+ * PCD Callback function for notifying the PCD when resuming from
-+ * suspend.
-+ *
-+ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
-+ */
-+static int32_t dwc_otg_pcd_resume_cb(void *p)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-+
-+ if (pcd->driver && pcd->driver->resume) {
-+ SPIN_UNLOCK(&pcd->lock);
-+ pcd->driver->resume(&pcd->gadget);
-+ SPIN_LOCK(&pcd->lock);
-+ }
-+
-+ /* Stop the SRP timeout timer. */
-+ if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) ||
-+ (!GET_CORE_IF(pcd)->core_params->i2c_enable)) {
-+ if (GET_CORE_IF(pcd)->srp_timer_started) {
-+ GET_CORE_IF(pcd)->srp_timer_started = 0;
-+ del_timer(&pcd->srp_timer);
-+ }
-+ }
-+ return 1;
-+}
-+
-+
-+/**
-+ * PCD Callback structure for handling mode switching.
-+ */
-+static dwc_otg_cil_callbacks_t pcd_callbacks =
-+{
-+ .start = dwc_otg_pcd_start_cb,
-+ .stop = dwc_otg_pcd_stop_cb,
-+ .suspend = dwc_otg_pcd_suspend_cb,
-+ .resume_wakeup = dwc_otg_pcd_resume_cb,
-+ .p = 0, /* Set at registration */
-+};
-+
-+/**
-+ * This function is called when the SRP timer expires. The SRP should
-+ * complete within 6 seconds.
-+ */
-+static void srp_timeout(unsigned long ptr)
-+{
-+ gotgctl_data_t gotgctl;
-+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *)ptr;
-+ volatile uint32_t *addr = &core_if->core_global_regs->gotgctl;
-+
-+ gotgctl.d32 = dwc_read_reg32(addr);
-+
-+ core_if->srp_timer_started = 0;
-+
-+ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
-+ (core_if->core_params->i2c_enable)) {
-+ DWC_PRINT("SRP Timeout\n");
-+
-+ if ((core_if->srp_success) &&
-+ (gotgctl.b.bsesvld)) {
-+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
-+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
-+ }
-+
-+ /* Clear Session Request */
-+ gotgctl.d32 = 0;
-+ gotgctl.b.sesreq = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
-+ gotgctl.d32, 0);
-+
-+ core_if->srp_success = 0;
-+ }
-+ else {
-+ DWC_ERROR("Device not connected/responding\n");
-+ gotgctl.b.sesreq = 0;
-+ dwc_write_reg32(addr, gotgctl.d32);
-+ }
-+ }
-+ else if (gotgctl.b.sesreq) {
-+ DWC_PRINT("SRP Timeout\n");
-+
-+ DWC_ERROR("Device not connected/responding\n");
-+ gotgctl.b.sesreq = 0;
-+ dwc_write_reg32(addr, gotgctl.d32);
-+ }
-+ else {
-+ DWC_PRINT(" SRP GOTGCTL=%0x\n", gotgctl.d32);
-+ }
-+}
-+
-+/**
-+ * Start the SRP timer to detect when the SRP does not complete within
-+ * 6 seconds.
-+ *
-+ * @param pcd the pcd structure.
-+ */
-+void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd)
-+{
-+ struct timer_list *srp_timer = &pcd->srp_timer;
-+ GET_CORE_IF(pcd)->srp_timer_started = 1;
-+ init_timer(srp_timer);
-+ srp_timer->function = srp_timeout;
-+ srp_timer->data = (unsigned long)GET_CORE_IF(pcd);
-+ srp_timer->expires = jiffies + (HZ*6);
-+ add_timer(srp_timer);
-+}
-+
-+/**
-+ * Tasklet
-+ *
-+ */
-+extern void start_next_request(dwc_otg_pcd_ep_t *ep);
-+
-+static void start_xfer_tasklet_func (unsigned long data)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t*)data;
-+ dwc_otg_core_if_t *core_if = pcd->otg_dev->core_if;
-+
-+ int i;
-+ depctl_data_t diepctl;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n");
-+
-+ diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl);
-+
-+ if (pcd->ep0.queue_sof) {
-+ pcd->ep0.queue_sof = 0;
-+ start_next_request (&pcd->ep0);
-+ // break;
-+ }
-+
-+ for (i=0; i<core_if->dev_if->num_in_eps; i++)
-+ {
-+ depctl_data_t diepctl;
-+ diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[i]->diepctl);
-+
-+ if (pcd->in_ep[i].queue_sof) {
-+ pcd->in_ep[i].queue_sof = 0;
-+ start_next_request (&pcd->in_ep[i]);
-+ // break;
-+ }
-+ }
-+
-+ return;
-+}
-+
-+
-+
-+
-+
-+
-+
-+static struct tasklet_struct start_xfer_tasklet = {
-+ .next = NULL,
-+ .state = 0,
-+ .count = ATOMIC_INIT(0),
-+ .func = start_xfer_tasklet_func,
-+ .data = 0,
-+};
-+/**
-+ * This function initialized the pcd Dp structures to there default
-+ * state.
-+ *
-+ * @param pcd the pcd structure.
-+ */
-+void dwc_otg_pcd_reinit(dwc_otg_pcd_t *pcd)
-+{
-+ static const char * names[] =
-+ {
-+
-+ "ep0",
-+ "ep1in",
-+ "ep2in",
-+ "ep3in",
-+ "ep4in",
-+ "ep5in",
-+ "ep6in",
-+ "ep7in",
-+ "ep8in",
-+ "ep9in",
-+ "ep10in",
-+ "ep11in",
-+ "ep12in",
-+ "ep13in",
-+ "ep14in",
-+ "ep15in",
-+ "ep1out",
-+ "ep2out",
-+ "ep3out",
-+ "ep4out",
-+ "ep5out",
-+ "ep6out",
-+ "ep7out",
-+ "ep8out",
-+ "ep9out",
-+ "ep10out",
-+ "ep11out",
-+ "ep12out",
-+ "ep13out",
-+ "ep14out",
-+ "ep15out"
-+
-+ };
-+
-+ int i;
-+ int in_ep_cntr, out_ep_cntr;
-+ uint32_t hwcfg1;
-+ uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps;
-+ uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps;
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
-+
-+ INIT_LIST_HEAD (&pcd->gadget.ep_list);
-+ pcd->gadget.ep0 = &pcd->ep0.ep;
-+ pcd->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+ INIT_LIST_HEAD (&pcd->gadget.ep0->ep_list);
-+
-+ /**
-+ * Initialize the EP0 structure.
-+ */
-+ ep = &pcd->ep0;
-+
-+ /* Init EP structure */
-+ ep->desc = 0;
-+ ep->pcd = pcd;
-+ ep->stopped = 1;
-+
-+ /* Init DWC ep structure */
-+ ep->dwc_ep.num = 0;
-+ ep->dwc_ep.active = 0;
-+ ep->dwc_ep.tx_fifo_num = 0;
-+ /* Control until ep is actvated */
-+ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-+ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
-+ ep->dwc_ep.dma_addr = 0;
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = 0;
-+ ep->queue_sof = 0;
-+ ep->dwc_ep.desc_addr = 0;
-+ ep->dwc_ep.dma_desc_addr = 0;
-+
-+ ep->dwc_ep.aligned_buf=NULL;
-+ ep->dwc_ep.aligned_buf_size=0;
-+ ep->dwc_ep.aligned_dma_addr=0;
-+
-+
-+ /* Init the usb_ep structure. */
-+ ep->ep.name = names[0];
-+ ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
-+
-+ /**
-+ * @todo NGS: What should the max packet size be set to
-+ * here? Before EP type is set?
-+ */
-+ ep->ep.maxpacket = MAX_PACKET_SIZE;
-+
-+ list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
-+
-+ INIT_LIST_HEAD (&ep->queue);
-+ /**
-+ * Initialize the EP structures.
-+ */
-+ in_ep_cntr = 0;
-+ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3;
-+
-+ for (i = 1; in_ep_cntr < num_in_eps; i++)
-+ {
-+ if((hwcfg1 & 0x1) == 0) {
-+ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr];
-+ in_ep_cntr ++;
-+
-+ /* Init EP structure */
-+ ep->desc = 0;
-+ ep->pcd = pcd;
-+ ep->stopped = 1;
-+
-+ /* Init DWC ep structure */
-+ ep->dwc_ep.is_in = 1;
-+ ep->dwc_ep.num = i;
-+ ep->dwc_ep.active = 0;
-+ ep->dwc_ep.tx_fifo_num = 0;
-+
-+ /* Control until ep is actvated */
-+ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-+ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
-+ ep->dwc_ep.dma_addr = 0;
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = 0;
-+ ep->queue_sof = 0;
-+ ep->dwc_ep.desc_addr = 0;
-+ ep->dwc_ep.dma_desc_addr = 0;
-+
-+ /* Init the usb_ep structure. */
-+ ep->ep.name = names[i];
-+ ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
-+
-+ /**
-+ * @todo NGS: What should the max packet size be set to
-+ * here? Before EP type is set?
-+ */
-+ ep->ep.maxpacket = MAX_PACKET_SIZE;
-+
-+ //add only even number ep as in
-+ if((i%2)==1)
-+ list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
-+
-+ INIT_LIST_HEAD (&ep->queue);
-+ }
-+ hwcfg1 >>= 2;
-+ }
-+
-+ out_ep_cntr = 0;
-+ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2;
-+
-+ for (i = 1; out_ep_cntr < num_out_eps; i++)
-+ {
-+ if((hwcfg1 & 0x1) == 0) {
-+ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr];
-+ out_ep_cntr++;
-+
-+ /* Init EP structure */
-+ ep->desc = 0;
-+ ep->pcd = pcd;
-+ ep->stopped = 1;
-+
-+ /* Init DWC ep structure */
-+ ep->dwc_ep.is_in = 0;
-+ ep->dwc_ep.num = i;
-+ ep->dwc_ep.active = 0;
-+ ep->dwc_ep.tx_fifo_num = 0;
-+ /* Control until ep is actvated */
-+ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-+ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
-+ ep->dwc_ep.dma_addr = 0;
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = 0;
-+ ep->queue_sof = 0;
-+
-+ /* Init the usb_ep structure. */
-+ ep->ep.name = names[15 + i];
-+ ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
-+ /**
-+ * @todo NGS: What should the max packet size be set to
-+ * here? Before EP type is set?
-+ */
-+ ep->ep.maxpacket = MAX_PACKET_SIZE;
-+
-+ //add only odd number ep as out
-+ if((i%2)==0)
-+ list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
-+
-+ INIT_LIST_HEAD (&ep->queue);
-+ }
-+ hwcfg1 >>= 2;
-+ }
-+
-+ /* remove ep0 from the list. There is a ep0 pointer.*/
-+ list_del_init (&pcd->ep0.ep.ep_list);
-+
-+ pcd->ep0state = EP0_DISCONNECT;
-+ pcd->ep0.ep.maxpacket = MAX_EP0_SIZE;
-+ pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE;
-+ pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-+}
-+
-+/**
-+ * This function releases the Gadget device.
-+ * required by device_unregister().
-+ *
-+ * @todo Should this do something? Should it free the PCD?
-+ */
-+static void dwc_otg_pcd_gadget_release(struct device *dev)
-+{
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, dev);
-+}
-+
-+
-+
-+/**
-+ * This function initialized the PCD portion of the driver.
-+ *
-+ */
-+u8 dev_id[]="gadget";
-+int dwc_otg_pcd_init(struct lm_device *lmdev)
-+{
-+ static char pcd_name[] = "dwc_otg_pcd";
-+ dwc_otg_pcd_t *pcd;
-+ dwc_otg_core_if_t* core_if;
-+ dwc_otg_dev_if_t* dev_if;
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lmdev);
-+ int retval = 0;
-+
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n",__func__, lmdev);
-+ /*
-+ * Allocate PCD structure
-+ */
-+ pcd = kmalloc(sizeof(dwc_otg_pcd_t), GFP_KERNEL);
-+
-+ if (pcd == 0) {
-+ return -ENOMEM;
-+ }
-+
-+ memset(pcd, 0, sizeof(dwc_otg_pcd_t));
-+ spin_lock_init(&pcd->lock);
-+
-+ otg_dev->pcd = pcd;
-+ s_pcd = pcd;
-+ pcd->gadget.name = pcd_name;
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31)
-+ strcpy(pcd->gadget.dev.bus_id, "gadget");
-+#else
-+ pcd->gadget.dev.init_name = dev_id;
-+#endif
-+ pcd->otg_dev = lm_get_drvdata(lmdev);
-+
-+ pcd->gadget.dev.parent = &lmdev->dev;
-+ pcd->gadget.dev.release = dwc_otg_pcd_gadget_release;
-+ pcd->gadget.ops = &dwc_otg_pcd_ops;
-+
-+ core_if = GET_CORE_IF(pcd);
-+ dev_if = core_if->dev_if;
-+
-+ if(core_if->hwcfg4.b.ded_fifo_en) {
-+ DWC_PRINT("Dedicated Tx FIFOs mode\n");
-+ }
-+ else {
-+ DWC_PRINT("Shared Tx FIFO mode\n");
-+ }
-+
-+ /* If the module is set to FS or if the PHY_TYPE is FS then the gadget
-+ * should not report as dual-speed capable. replace the following line
-+ * with the block of code below it once the software is debugged for
-+ * this. If is_dualspeed = 0 then the gadget driver should not report
-+ * a device qualifier descriptor when queried. */
-+ if ((GET_CORE_IF(pcd)->core_params->speed == DWC_SPEED_PARAM_FULL) ||
-+ ((GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == 2) &&
-+ (GET_CORE_IF(pcd)->hwcfg2.b.fs_phy_type == 1) &&
-+ (GET_CORE_IF(pcd)->core_params->ulpi_fs_ls))) {
-+ pcd->gadget.is_dualspeed = 0;
-+ }
-+ else {
-+ pcd->gadget.is_dualspeed = 1;
-+ }
-+
-+ if ((otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE) ||
-+ (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST) ||
-+ (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
-+ (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
-+ pcd->gadget.is_otg = 0;
-+ }
-+ else {
-+ pcd->gadget.is_otg = 1;
-+ }
-+
-+
-+ pcd->driver = 0;
-+ /* Register the gadget device */
-+printk("%s: 1\n",__func__);
-+ retval = device_register(&pcd->gadget.dev);
-+ if (retval != 0) {
-+ kfree (pcd);
-+printk("%s: 2\n",__func__);
-+ return retval;
-+ }
-+
-+
-+ /*
-+ * Initialized the Core for Device mode.
-+ */
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ dwc_otg_core_dev_init(core_if);
-+ }
-+
-+ /*
-+ * Initialize EP structures
-+ */
-+ dwc_otg_pcd_reinit(pcd);
-+
-+ /*
-+ * Register the PCD Callbacks.
-+ */
-+ dwc_otg_cil_register_pcd_callbacks(otg_dev->core_if, &pcd_callbacks,
-+ pcd);
-+ /*
-+ * Setup interupt handler
-+ */
-+ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", lmdev->irq);
-+ retval = request_irq(lmdev->irq, dwc_otg_pcd_irq,
-+ IRQF_SHARED, pcd->gadget.name, pcd);
-+ if (retval != 0) {
-+ DWC_ERROR("request of irq%d failed\n", lmdev->irq);
-+ device_unregister(&pcd->gadget.dev);
-+ kfree (pcd);
-+ return -EBUSY;
-+ }
-+
-+ /*
-+ * Initialize the DMA buffer for SETUP packets
-+ */
-+ if (GET_CORE_IF(pcd)->dma_enable) {
-+ pcd->setup_pkt = dma_alloc_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, &pcd->setup_pkt_dma_handle, 0);
-+ if (pcd->setup_pkt == 0) {
-+ free_irq(lmdev->irq, pcd);
-+ device_unregister(&pcd->gadget.dev);
-+ kfree (pcd);
-+ return -ENOMEM;
-+ }
-+
-+ pcd->status_buf = dma_alloc_coherent (NULL, sizeof (uint16_t), &pcd->status_buf_dma_handle, 0);
-+ if (pcd->status_buf == 0) {
-+ dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
-+ free_irq(lmdev->irq, pcd);
-+ device_unregister(&pcd->gadget.dev);
-+ kfree (pcd);
-+ return -ENOMEM;
-+ }
-+
-+ if (GET_CORE_IF(pcd)->dma_desc_enable) {
-+ dev_if->setup_desc_addr[0] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[0], 1);
-+ dev_if->setup_desc_addr[1] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[1], 1);
-+ dev_if->in_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_in_desc_addr, 1);
-+ dev_if->out_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_out_desc_addr, 1);
-+
-+ if(dev_if->setup_desc_addr[0] == 0
-+ || dev_if->setup_desc_addr[1] == 0
-+ || dev_if->in_desc_addr == 0
-+ || dev_if->out_desc_addr == 0 ) {
-+
-+ if(dev_if->out_desc_addr)
-+ dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
-+ if(dev_if->in_desc_addr)
-+ dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
-+ if(dev_if->setup_desc_addr[1])
-+ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
-+ if(dev_if->setup_desc_addr[0])
-+ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
-+
-+
-+ dma_free_coherent(NULL, sizeof(*pcd->status_buf), pcd->status_buf, pcd->setup_pkt_dma_handle);
-+ dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
-+
-+ free_irq(lmdev->irq, pcd);
-+ device_unregister(&pcd->gadget.dev);
-+ kfree (pcd);
-+
-+ return -ENOMEM;
-+ }
-+ }
-+ }
-+ else {
-+ pcd->setup_pkt = kmalloc (sizeof (*pcd->setup_pkt) * 5, GFP_KERNEL);
-+ if (pcd->setup_pkt == 0) {
-+ free_irq(lmdev->irq, pcd);
-+ device_unregister(&pcd->gadget.dev);
-+ kfree (pcd);
-+ return -ENOMEM;
-+ }
-+
-+ pcd->status_buf = kmalloc (sizeof (uint16_t), GFP_KERNEL);
-+ if (pcd->status_buf == 0) {
-+ kfree(pcd->setup_pkt);
-+ free_irq(lmdev->irq, pcd);
-+ device_unregister(&pcd->gadget.dev);
-+ kfree (pcd);
-+ return -ENOMEM;
-+ }
-+ }
-+
-+
-+ /* Initialize tasklet */
-+ start_xfer_tasklet.data = (unsigned long)pcd;
-+ pcd->start_xfer_tasklet = &start_xfer_tasklet;
-+
-+ return 0;
-+}
-+
-+/**
-+ * Cleanup the PCD.
-+ */
-+void dwc_otg_pcd_remove(struct lm_device *lmdev)
-+{
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lmdev);
-+ dwc_otg_pcd_t *pcd = otg_dev->pcd;
-+ dwc_otg_dev_if_t* dev_if = GET_CORE_IF(pcd)->dev_if;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, lmdev);
-+
-+ /*
-+ * Free the IRQ
-+ */
-+ free_irq(lmdev->irq, pcd);
-+
-+ /* start with the driver above us */
-+ if (pcd->driver) {
-+ /* should have been done already by driver model core */
-+ DWC_WARN("driver '%s' is still registered\n",
-+ pcd->driver->driver.name);
-+ usb_gadget_unregister_driver(pcd->driver);
-+ }
-+ device_unregister(&pcd->gadget.dev);
-+
-+ if (GET_CORE_IF(pcd)->dma_enable) {
-+ dma_free_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, pcd->setup_pkt, pcd->setup_pkt_dma_handle);
-+ dma_free_coherent (NULL, sizeof (uint16_t), pcd->status_buf, pcd->status_buf_dma_handle);
-+ if (GET_CORE_IF(pcd)->dma_desc_enable) {
-+ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
-+ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
-+ dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
-+ dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
-+ }
-+ }
-+ else {
-+ kfree (pcd->setup_pkt);
-+ kfree (pcd->status_buf);
-+ }
-+
-+ kfree(pcd);
-+ otg_dev->pcd = 0;
-+}
-+
-+/**
-+ * This function registers a gadget driver with the PCD.
-+ *
-+ * When a driver is successfully registered, it will receive control
-+ * requests including set_configuration(), which enables non-control
-+ * requests. then usb traffic follows until a disconnect is reported.
-+ * then a host may connect again, or the driver might get unbound.
-+ *
-+ * @param driver The driver being registered
-+ */
-+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
-+{
-+ int retval;
-+
-+ DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n", driver->driver.name);
-+
-+ if (!driver || driver->speed == USB_SPEED_UNKNOWN ||
-+ !driver->bind ||
-+ !driver->unbind ||
-+ !driver->disconnect ||
-+ !driver->setup) {
-+ DWC_DEBUGPL(DBG_PCDV,"EINVAL\n");
-+ return -EINVAL;
-+ }
-+ if (s_pcd == 0) {
-+ DWC_DEBUGPL(DBG_PCDV,"ENODEV\n");
-+ return -ENODEV;
-+ }
-+ if (s_pcd->driver != 0) {
-+ DWC_DEBUGPL(DBG_PCDV,"EBUSY (%p)\n", s_pcd->driver);
-+ return -EBUSY;
-+ }
-+
-+ /* hook up the driver */
-+ s_pcd->driver = driver;
-+ s_pcd->gadget.dev.driver = &driver->driver;
-+
-+ DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", driver->driver.name);
-+ retval = driver->bind(&s_pcd->gadget);
-+ if (retval) {
-+ DWC_ERROR("bind to driver %s --> error %d\n",
-+ driver->driver.name, retval);
-+ s_pcd->driver = 0;
-+ s_pcd->gadget.dev.driver = 0;
-+ return retval;
-+ }
-+ DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n",
-+ driver->driver.name);
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(usb_gadget_register_driver);
-+
-+/**
-+ * This function unregisters a gadget driver
-+ *
-+ * @param driver The driver being unregistered
-+ */
-+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-+{
-+ //DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver);
-+
-+ if (s_pcd == 0) {
-+ DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__,
-+ -ENODEV);
-+ return -ENODEV;
-+ }
-+ if (driver == 0 || driver != s_pcd->driver) {
-+ DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__,
-+ -EINVAL);
-+ return -EINVAL;
-+ }
-+
-+ driver->unbind(&s_pcd->gadget);
-+ s_pcd->driver = 0;
-+
-+ DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n",
-+ driver->driver.name);
-+ return 0;
-+}
-+EXPORT_SYMBOL(usb_gadget_unregister_driver);
-+
-+#endif /* DWC_HOST_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_pcd.h
-@@ -0,0 +1,297 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $
-+ * $Revision: #36 $
-+ * $Date: 2008/09/26 $
-+ * $Change: 1103515 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_HOST_ONLY
-+#if !defined(__DWC_PCD_H__)
-+#define __DWC_PCD_H__
-+
-+#include <linux/types.h>
-+#include <linux/list.h>
-+#include <linux/errno.h>
-+#include <linux/device.h>
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
-+# include <linux/usb/ch9.h>
-+# include <linux/usb/gadget.h>
-+#else
-+# include <linux/usb_ch9.h>
-+# include <linux/usb_gadget.h>
-+#endif
-+
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+
-+struct lm_device;
-+struct dwc_otg_device;
-+
-+#include "dwc_otg_cil.h"
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the structures, constants, and interfaces for
-+ * the Perpherial Contoller Driver (PCD).
-+ *
-+ * The Peripheral Controller Driver (PCD) for Linux will implement the
-+ * Gadget API, so that the existing Gadget drivers can be used. For
-+ * the Mass Storage Function driver the File-backed USB Storage Gadget
-+ * (FBS) driver will be used. The FBS driver supports the
-+ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only
-+ * transports.
-+ *
-+ */
-+
-+/** Invalid DMA Address */
-+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-+/** Maxpacket size for EP0 */
-+#define MAX_EP0_SIZE 64
-+/** Maxpacket size for any EP */
-+#define MAX_PACKET_SIZE 1024
-+
-+/** Max Transfer size for any EP */
-+#define MAX_TRANSFER_SIZE 65535
-+
-+/** Max DMA Descriptor count for any EP */
-+#define MAX_DMA_DESC_CNT 64
-+
-+/**
-+ * Get the pointer to the core_if from the pcd pointer.
-+ */
-+#define GET_CORE_IF( _pcd ) (_pcd->otg_dev->core_if)
-+
-+/**
-+ * States of EP0.
-+ */
-+typedef enum ep0_state
-+{
-+ EP0_DISCONNECT, /* no host */
-+ EP0_IDLE,
-+ EP0_IN_DATA_PHASE,
-+ EP0_OUT_DATA_PHASE,
-+ EP0_IN_STATUS_PHASE,
-+ EP0_OUT_STATUS_PHASE,
-+ EP0_STALL,
-+} ep0state_e;
-+
-+/** Fordward declaration.*/
-+struct dwc_otg_pcd;
-+
-+/** DWC_otg iso request structure.
-+ *
-+ */
-+typedef struct usb_iso_request dwc_otg_pcd_iso_request_t;
-+
-+/** PCD EP structure.
-+ * This structure describes an EP, there is an array of EPs in the PCD
-+ * structure.
-+ */
-+typedef struct dwc_otg_pcd_ep
-+{
-+ /** USB EP data */
-+ struct usb_ep ep;
-+ /** USB EP Descriptor */
-+ const struct usb_endpoint_descriptor *desc;
-+
-+ /** queue of dwc_otg_pcd_requests. */
-+ struct list_head queue;
-+ unsigned stopped : 1;
-+ unsigned disabling : 1;
-+ unsigned dma : 1;
-+ unsigned queue_sof : 1;
-+
-+#ifdef DWC_EN_ISOC
-+ /** DWC_otg Isochronous Transfer */
-+ struct usb_iso_request* iso_req;
-+#endif //DWC_EN_ISOC
-+
-+ /** DWC_otg ep data. */
-+ dwc_ep_t dwc_ep;
-+
-+ /** Pointer to PCD */
-+ struct dwc_otg_pcd *pcd;
-+}dwc_otg_pcd_ep_t;
-+
-+
-+
-+/** DWC_otg PCD Structure.
-+ * This structure encapsulates the data for the dwc_otg PCD.
-+ */
-+typedef struct dwc_otg_pcd
-+{
-+ /** USB gadget */
-+ struct usb_gadget gadget;
-+ /** USB gadget driver pointer*/
-+ struct usb_gadget_driver *driver;
-+ /** The DWC otg device pointer. */
-+ struct dwc_otg_device *otg_dev;
-+
-+ /** State of EP0 */
-+ ep0state_e ep0state;
-+ /** EP0 Request is pending */
-+ unsigned ep0_pending : 1;
-+ /** Indicates when SET CONFIGURATION Request is in process */
-+ unsigned request_config : 1;
-+ /** The state of the Remote Wakeup Enable. */
-+ unsigned remote_wakeup_enable : 1;
-+ /** The state of the B-Device HNP Enable. */
-+ unsigned b_hnp_enable : 1;
-+ /** The state of A-Device HNP Support. */
-+ unsigned a_hnp_support : 1;
-+ /** The state of the A-Device Alt HNP support. */
-+ unsigned a_alt_hnp_support : 1;
-+ /** Count of pending Requests */
-+ unsigned request_pending;
-+
-+ /** SETUP packet for EP0
-+ * This structure is allocated as a DMA buffer on PCD initialization
-+ * with enough space for up to 3 setup packets.
-+ */
-+ union
-+ {
-+ struct usb_ctrlrequest req;
-+ uint32_t d32[2];
-+ } *setup_pkt;
-+
-+ dma_addr_t setup_pkt_dma_handle;
-+
-+ /** 2-byte dma buffer used to return status from GET_STATUS */
-+ uint16_t *status_buf;
-+ dma_addr_t status_buf_dma_handle;
-+
-+ /** EP0 */
-+ dwc_otg_pcd_ep_t ep0;
-+
-+ /** Array of IN EPs. */
-+ dwc_otg_pcd_ep_t in_ep[ MAX_EPS_CHANNELS - 1];
-+ /** Array of OUT EPs. */
-+ dwc_otg_pcd_ep_t out_ep[ MAX_EPS_CHANNELS - 1];
-+ /** number of valid EPs in the above array. */
-+// unsigned num_eps : 4;
-+ spinlock_t lock;
-+ /** Timer for SRP. If it expires before SRP is successful
-+ * clear the SRP. */
-+ struct timer_list srp_timer;
-+
-+ /** Tasklet to defer starting of TEST mode transmissions until
-+ * Status Phase has been completed.
-+ */
-+ struct tasklet_struct test_mode_tasklet;
-+
-+ /** Tasklet to delay starting of xfer in DMA mode */
-+ struct tasklet_struct *start_xfer_tasklet;
-+
-+ /** The test mode to enter when the tasklet is executed. */
-+ unsigned test_mode;
-+
-+} dwc_otg_pcd_t;
-+
-+
-+/** DWC_otg request structure.
-+ * This structure is a list of requests.
-+ */
-+typedef struct
-+{
-+ struct usb_request req; /**< USB Request. */
-+ struct list_head queue; /**< queue of these requests. */
-+} dwc_otg_pcd_request_t;
-+
-+
-+extern int dwc_otg_pcd_init(struct lm_device *lmdev);
-+
-+//extern void dwc_otg_pcd_remove( struct dwc_otg_device *_otg_dev );
-+extern void dwc_otg_pcd_remove( struct lm_device *lmdev );
-+extern int32_t dwc_otg_pcd_handle_intr( dwc_otg_pcd_t *pcd );
-+extern void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd );
-+
-+extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd);
-+extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set);
-+
-+extern void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req);
-+extern void dwc_otg_request_done(dwc_otg_pcd_ep_t *_ep, dwc_otg_pcd_request_t *req,
-+ int status);
-+extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *_ep);
-+extern void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *_pcd,
-+ const unsigned reset);
-+#ifndef VERBOSE
-+#define VERIFY_PCD_DMA_ADDR(_addr_) BUG_ON(((_addr_)==DMA_ADDR_INVALID)||\
-+ ((_addr_)==0)||\
-+ ((_addr_)&0x3))
-+#else
-+#define VERIFY_PCD_DMA_ADDR(_addr_) {\
-+ if(((_addr_)==DMA_ADDR_INVALID)||\
-+ ((_addr_)==0)||\
-+ ((_addr_)&0x3)) {\
-+ printk("%s: Invalid DMA address "#_addr_"(%.8x)\n",__func__,_addr_);\
-+ BUG();\
-+ }\
-+ }
-+#endif
-+
-+
-+static inline void ep_check_and_patch_dma_addr(dwc_otg_pcd_ep_t *ep){
-+//void ep_check_and_patch_dma_addr(dwc_otg_pcd_ep_t *ep){
-+ dwc_ep_t *dwc_ep=&ep->dwc_ep;
-+
-+DWC_DEBUGPL(DBG_PCDV,"%s: dwc_ep xfer_buf=%.8x, total_len=%d, dma_addr=%.8x\n",__func__,(u32)dwc_ep->xfer_buff,(dwc_ep->total_len),dwc_ep->dma_addr);
-+ if (/*(core_if->dma_enable)&&*/(dwc_ep->dma_addr==DMA_ADDR_INVALID)) {
-+ if((((u32)dwc_ep->xfer_buff)&0x3)==0){
-+ dwc_ep->dma_addr=dma_map_single(NULL,(void *)(dwc_ep->start_xfer_buff),(dwc_ep->total_len), DMA_TO_DEVICE);
-+DWC_DEBUGPL(DBG_PCDV," got dma_addr=%.8x\n",dwc_ep->dma_addr);
-+ }else{
-+DWC_DEBUGPL(DBG_PCDV," buf not aligned, use aligned_buf instead. xfer_buf=%.8x, total_len=%d, aligned_buf_size=%d\n",(u32)dwc_ep->xfer_buff,(dwc_ep->total_len),dwc_ep->aligned_buf_size);
-+ if(dwc_ep->aligned_buf_size<dwc_ep->total_len){
-+ if(dwc_ep->aligned_buf){
-+//printk(" free buff dwc_ep aligned_buf_size=%d, aligned_buf(%.8x), aligned_dma_addr(%.8x));\n",dwc_ep->aligned_buf_size,dwc_ep->aligned_buf,dwc_ep->aligned_dma_addr);
-+ //dma_free_coherent(NULL,dwc_ep->aligned_buf_size,dwc_ep->aligned_buf,dwc_ep->aligned_dma_addr);
-+ kfree(dwc_ep->aligned_buf);
-+ }
-+ dwc_ep->aligned_buf_size=((1<<20)>(dwc_ep->total_len<<1))?(dwc_ep->total_len<<1):(1<<20);
-+ //dwc_ep->aligned_buf = dma_alloc_coherent (NULL, dwc_ep->aligned_buf_size, &dwc_ep->aligned_dma_addr, GFP_KERNEL|GFP_DMA);
-+ dwc_ep->aligned_buf=kmalloc(dwc_ep->aligned_buf_size,GFP_KERNEL|GFP_DMA|GFP_ATOMIC);
-+ dwc_ep->aligned_dma_addr=dma_map_single(NULL,(void *)(dwc_ep->aligned_buf),(dwc_ep->aligned_buf_size),DMA_FROM_DEVICE);
-+ if(!dwc_ep->aligned_buf){
-+ DWC_ERROR("Cannot alloc required buffer!!\n");
-+ BUG();
-+ }
-+DWC_DEBUGPL(DBG_PCDV," dwc_ep allocated aligned buf=%.8x, dma_addr=%.8x, size=%d(0x%x)\n", (u32)dwc_ep->aligned_buf, dwc_ep->aligned_dma_addr, dwc_ep->aligned_buf_size, dwc_ep->aligned_buf_size);
-+ }
-+ dwc_ep->dma_addr=dwc_ep->aligned_dma_addr;
-+ if(dwc_ep->is_in) {
-+ memcpy(dwc_ep->aligned_buf,dwc_ep->xfer_buff,dwc_ep->total_len);
-+ dma_sync_single_for_device(NULL,dwc_ep->dma_addr,dwc_ep->total_len,DMA_TO_DEVICE);
-+ }
-+ }
-+ }
-+}
-+
-+#endif
-+#endif /* DWC_HOST_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_pcd_intr.c
-@@ -0,0 +1,3708 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $
-+ * $Revision: #83 $
-+ * $Date: 2008/10/14 $
-+ * $Change: 1115682 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_HOST_ONLY
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/version.h>
-+#include <linux/pci.h>
-+
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_pcd.h"
-+
-+
-+#define DEBUG_EP0
-+
-+
-+/* request functions defined in "dwc_otg_pcd.c" */
-+
-+/** @file
-+ * This file contains the implementation of the PCD Interrupt handlers.
-+ *
-+ * The PCD handles the device interrupts. Many conditions can cause a
-+ * device interrupt. When an interrupt occurs, the device interrupt
-+ * service routine determines the cause of the interrupt and
-+ * dispatches handling to the appropriate function. These interrupt
-+ * handling functions are described below.
-+ * All interrupt registers are processed from LSB to MSB.
-+ */
-+
-+
-+/**
-+ * This function prints the ep0 state for debug purposes.
-+ */
-+static inline void print_ep0_state(dwc_otg_pcd_t *pcd)
-+{
-+#ifdef DEBUG
-+ char str[40];
-+
-+ switch (pcd->ep0state) {
-+ case EP0_DISCONNECT:
-+ strcpy(str, "EP0_DISCONNECT");
-+ break;
-+ case EP0_IDLE:
-+ strcpy(str, "EP0_IDLE");
-+ break;
-+ case EP0_IN_DATA_PHASE:
-+ strcpy(str, "EP0_IN_DATA_PHASE");
-+ break;
-+ case EP0_OUT_DATA_PHASE:
-+ strcpy(str, "EP0_OUT_DATA_PHASE");
-+ break;
-+ case EP0_IN_STATUS_PHASE:
-+ strcpy(str,"EP0_IN_STATUS_PHASE");
-+ break;
-+ case EP0_OUT_STATUS_PHASE:
-+ strcpy(str,"EP0_OUT_STATUS_PHASE");
-+ break;
-+ case EP0_STALL:
-+ strcpy(str,"EP0_STALL");
-+ break;
-+ default:
-+ strcpy(str,"EP0_INVALID");
-+ }
-+
-+ DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state);
-+#endif
-+}
-+
-+/**
-+ * This function returns pointer to in ep struct with number ep_num
-+ */
-+static inline dwc_otg_pcd_ep_t* get_in_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num)
-+{
-+ int i;
-+ int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
-+ if(ep_num == 0) {
-+ return &pcd->ep0;
-+ }
-+ else {
-+ for(i = 0; i < num_in_eps; ++i)
-+ {
-+ if(pcd->in_ep[i].dwc_ep.num == ep_num)
-+ return &pcd->in_ep[i];
-+ }
-+ return 0;
-+ }
-+}
-+/**
-+ * This function returns pointer to out ep struct with number ep_num
-+ */
-+static inline dwc_otg_pcd_ep_t* get_out_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num)
-+{
-+ int i;
-+ int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
-+ if(ep_num == 0) {
-+ return &pcd->ep0;
-+ }
-+ else {
-+ for(i = 0; i < num_out_eps; ++i)
-+ {
-+ if(pcd->out_ep[i].dwc_ep.num == ep_num)
-+ return &pcd->out_ep[i];
-+ }
-+ return 0;
-+ }
-+}
-+/**
-+ * This functions gets a pointer to an EP from the wIndex address
-+ * value of the control request.
-+ */
-+static dwc_otg_pcd_ep_t *get_ep_by_addr (dwc_otg_pcd_t *pcd, u16 wIndex)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
-+ return &pcd->ep0;
-+ list_for_each_entry(ep, &pcd->gadget.ep_list, ep.ep_list)
-+ {
-+ u8 bEndpointAddress;
-+
-+ if (!ep->desc)
-+ continue;
-+
-+ bEndpointAddress = ep->desc->bEndpointAddress;
-+ if((wIndex & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK))
-+ == (bEndpointAddress & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK)))
-+ return ep;
-+ }
-+ return NULL;
-+}
-+
-+/**
-+ * This function checks the EP request queue, if the queue is not
-+ * empty the next request is started.
-+ */
-+void start_next_request(dwc_otg_pcd_ep_t *ep)
-+{
-+ dwc_otg_pcd_request_t *req = 0;
-+ uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
-+ if (!list_empty(&ep->queue)) {
-+ req = list_entry(ep->queue.next,
-+ dwc_otg_pcd_request_t, queue);
-+
-+ /* Setup and start the Transfer */
-+ ep->dwc_ep.dma_addr = req->req.dma;
-+ ep->dwc_ep.start_xfer_buff = req->req.buf;
-+ ep->dwc_ep.xfer_buff = req->req.buf;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = req->req.length;
-+ ep->dwc_ep.xfer_len = 0;
-+ ep->dwc_ep.xfer_count = 0;
-+
-+ if(max_transfer > MAX_TRANSFER_SIZE) {
-+ ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
-+ } else {
-+ ep->dwc_ep.maxxfer = max_transfer;
-+ }
-+
-+ if(req->req.zero) {
-+ if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
-+ && (ep->dwc_ep.total_len != 0)) {
-+ ep->dwc_ep.sent_zlp = 1;
-+ }
-+
-+ }
-+ ep_check_and_patch_dma_addr(ep);
-+ dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
-+ }
-+}
-+
-+/**
-+ * This function handles the SOF Interrupts. At this time the SOF
-+ * Interrupt is disabled.
-+ */
-+int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+
-+ gintsts_data_t gintsts;
-+
-+ DWC_DEBUGPL(DBG_PCD, "SOF\n");
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.sofintr = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+
-+/**
-+ * This function handles the Rx Status Queue Level Interrupt, which
-+ * indicates that there is a least one packet in the Rx FIFO. The
-+ * packets are moved from the FIFO to memory, where they will be
-+ * processed when the Endpoint Interrupt Register indicates Transfer
-+ * Complete or SETUP Phase Done.
-+ *
-+ * Repeat the following until the Rx Status Queue is empty:
-+ * -# Read the Receive Status Pop Register (GRXSTSP) to get Packet
-+ * info
-+ * -# If Receive FIFO is empty then skip to step Clear the interrupt
-+ * and exit
-+ * -# If SETUP Packet call dwc_otg_read_setup_packet to copy the
-+ * SETUP data to the buffer
-+ * -# If OUT Data Packet call dwc_otg_read_packet to copy the data
-+ * to the destination buffer
-+ */
-+int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ gintmsk_data_t gintmask = {.d32=0};
-+ device_grxsts_data_t status;
-+ dwc_otg_pcd_ep_t *ep;
-+ gintsts_data_t gintsts;
-+#ifdef DEBUG
-+ static char *dpid_str[] ={ "D0", "D2", "D1", "MDATA" };
-+#endif
-+
-+ //DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd);
-+ /* Disable the Rx Status Queue Level interrupt */
-+ gintmask.b.rxstsqlvl= 1;
-+ dwc_modify_reg32(&global_regs->gintmsk, gintmask.d32, 0);
-+
-+ /* Get the Status from the top of the FIFO */
-+ status.d32 = dwc_read_reg32(&global_regs->grxstsp);
-+
-+ DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s "
-+ "pktsts:%x Frame:%d(0x%0x)\n",
-+ status.b.epnum, status.b.bcnt,
-+ dpid_str[status.b.dpid],
-+ status.b.pktsts, status.b.fn, status.b.fn);
-+ /* Get pointer to EP structure */
-+ ep = get_out_ep(pcd, status.b.epnum);
-+
-+ switch (status.b.pktsts) {
-+ case DWC_DSTS_GOUT_NAK:
-+ DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n");
-+ break;
-+ case DWC_STS_DATA_UPDT:
-+ DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n");
-+ if (status.b.bcnt && ep->dwc_ep.xfer_buff) {
-+ /** @todo NGS Check for buffer overflow? */
-+ dwc_otg_read_packet(core_if,
-+ ep->dwc_ep.xfer_buff,
-+ status.b.bcnt);
-+ ep->dwc_ep.xfer_count += status.b.bcnt;
-+ ep->dwc_ep.xfer_buff += status.b.bcnt;
-+ }
-+ break;
-+ case DWC_STS_XFER_COMP:
-+ DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n");
-+ break;
-+ case DWC_DSTS_SETUP_COMP:
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n");
-+#endif
-+ break;
-+case DWC_DSTS_SETUP_UPDT:
-+ dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32);
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD,
-+ "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n",
-+ pcd->setup_pkt->req.bRequestType,
-+ pcd->setup_pkt->req.bRequest,
-+ pcd->setup_pkt->req.wValue,
-+ pcd->setup_pkt->req.wIndex,
-+ pcd->setup_pkt->req.wLength);
-+#endif
-+ ep->dwc_ep.xfer_count += status.b.bcnt;
-+ break;
-+ default:
-+ DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n",
-+ status.b.pktsts);
-+ break;
-+ }
-+
-+ /* Enable the Rx Status Queue Level interrupt */
-+ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmask.d32);
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.rxstsqlvl = 1;
-+ dwc_write_reg32 (&global_regs->gintsts, gintsts.d32);
-+
-+ //DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__);
-+ return 1;
-+}
-+/**
-+ * This function examines the Device IN Token Learning Queue to
-+ * determine the EP number of the last IN token received. This
-+ * implementation is for the Mass Storage device where there are only
-+ * 2 IN EPs (Control-IN and BULK-IN).
-+ *
-+ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there
-+ * are 8 EP Numbers in each of the other possible DTKNQ Registers.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ *
-+ */
-+static inline int get_ep_of_last_in_token(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_device_global_regs_t *dev_global_regs =
-+ core_if->dev_if->dev_global_regs;
-+ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
-+ /* Number of Token Queue Registers */
-+ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
-+ dtknq1_data_t dtknqr1;
-+ uint32_t in_tkn_epnums[4];
-+ int ndx = 0;
-+ int i = 0;
-+ volatile uint32_t *addr = &dev_global_regs->dtknqr1;
-+ int epnum = 0;
-+
-+ //DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
-+
-+
-+ /* Read the DTKNQ Registers */
-+ for (i = 0; i < DTKNQ_REG_CNT; i++)
-+ {
-+ in_tkn_epnums[ i ] = dwc_read_reg32(addr);
-+ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i+1,
-+ in_tkn_epnums[i]);
-+ if (addr == &dev_global_regs->dvbusdis) {
-+ addr = &dev_global_regs->dtknqr3_dthrctl;
-+ }
-+ else {
-+ ++addr;
-+ }
-+
-+ }
-+
-+ /* Copy the DTKNQR1 data to the bit field. */
-+ dtknqr1.d32 = in_tkn_epnums[0];
-+ /* Get the EP numbers */
-+ in_tkn_epnums[0] = dtknqr1.b.epnums0_5;
-+ ndx = dtknqr1.b.intknwptr - 1;
-+
-+ //DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx);
-+ if (ndx == -1) {
-+ /** @todo Find a simpler way to calculate the max
-+ * queue position.*/
-+ int cnt = TOKEN_Q_DEPTH;
-+ if (TOKEN_Q_DEPTH <= 6) {
-+ cnt = TOKEN_Q_DEPTH - 1;
-+ }
-+ else if (TOKEN_Q_DEPTH <= 14) {
-+ cnt = TOKEN_Q_DEPTH - 7;
-+ }
-+ else if (TOKEN_Q_DEPTH <= 22) {
-+ cnt = TOKEN_Q_DEPTH - 15;
-+ }
-+ else {
-+ cnt = TOKEN_Q_DEPTH - 23;
-+ }
-+ epnum = (in_tkn_epnums[ DTKNQ_REG_CNT - 1 ] >> (cnt * 4)) & 0xF;
-+ }
-+ else {
-+ if (ndx <= 5) {
-+ epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF;
-+ }
-+ else if (ndx <= 13) {
-+ ndx -= 6;
-+ epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF;
-+ }
-+ else if (ndx <= 21) {
-+ ndx -= 14;
-+ epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF;
-+ }
-+ else if (ndx <= 29) {
-+ ndx -= 22;
-+ epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF;
-+ }
-+ }
-+ //DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum);
-+ return epnum;
-+}
-+
-+/**
-+ * This interrupt occurs when the non-periodic Tx FIFO is half-empty.
-+ * The active request is checked for the next packet to be loaded into
-+ * the non-periodic Tx FIFO.
-+ */
-+int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+ dwc_otg_dev_in_ep_regs_t *ep_regs;
-+ gnptxsts_data_t txstatus = {.d32 = 0};
-+ gintsts_data_t gintsts;
-+
-+ int epnum = 0;
-+ dwc_otg_pcd_ep_t *ep = 0;
-+ uint32_t len = 0;
-+ int dwords;
-+
-+ /* Get the epnum from the IN Token Learning Queue. */
-+ epnum = get_ep_of_last_in_token(core_if);
-+ ep = get_in_ep(pcd, epnum);
-+
-+ DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %s(%d) \n", ep->ep.name, epnum);
-+ ep_regs = core_if->dev_if->in_ep_regs[epnum];
-+
-+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-+ if (len > ep->dwc_ep.maxpacket) {
-+ len = ep->dwc_ep.maxpacket;
-+ }
-+ dwords = (len + 3)/4;
-+
-+
-+ /* While there is space in the queue and space in the FIFO and
-+ * More data to tranfer, Write packets to the Tx FIFO */
-+ txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n",txstatus.d32);
-+
-+ while (txstatus.b.nptxqspcavail > 0 &&
-+ txstatus.b.nptxfspcavail > dwords &&
-+ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) {
-+ /* Write the FIFO */
-+ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
-+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-+
-+ if (len > ep->dwc_ep.maxpacket) {
-+ len = ep->dwc_ep.maxpacket;
-+ }
-+
-+ dwords = (len + 3)/4;
-+ txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ DWC_DEBUGPL(DBG_PCDV,"GNPTXSTS=0x%08x\n",txstatus.d32);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n",
-+ dwc_read_reg32(&global_regs->gnptxsts));
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.nptxfempty = 1;
-+ dwc_write_reg32 (&global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This function is called when dedicated Tx FIFO Empty interrupt occurs.
-+ * The active request is checked for the next packet to be loaded into
-+ * apropriate Tx FIFO.
-+ */
-+static int32_t write_empty_tx_fifo(dwc_otg_pcd_t *pcd, uint32_t epnum)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t* dev_if = core_if->dev_if;
-+ dwc_otg_dev_in_ep_regs_t *ep_regs;
-+ dtxfsts_data_t txstatus = {.d32 = 0};
-+ dwc_otg_pcd_ep_t *ep = 0;
-+ uint32_t len = 0;
-+ int dwords;
-+
-+ ep = get_in_ep(pcd, epnum);
-+
-+ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %s(%d) \n", ep->ep.name, epnum);
-+
-+ ep_regs = core_if->dev_if->in_ep_regs[epnum];
-+
-+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-+
-+ if (len > ep->dwc_ep.maxpacket) {
-+ len = ep->dwc_ep.maxpacket;
-+ }
-+
-+ dwords = (len + 3)/4;
-+
-+ /* While there is space in the queue and space in the FIFO and
-+ * More data to tranfer, Write packets to the Tx FIFO */
-+ txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts);
-+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,txstatus.d32);
-+
-+ while (txstatus.b.txfspcavail > dwords &&
-+ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len &&
-+ ep->dwc_ep.xfer_len != 0) {
-+ /* Write the FIFO */
-+ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
-+
-+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-+ if (len > ep->dwc_ep.maxpacket) {
-+ len = ep->dwc_ep.maxpacket;
-+ }
-+
-+ dwords = (len + 3)/4;
-+ txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts);
-+ DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts));
-+
-+ return 1;
-+}
-+
-+
-+/**
-+ * This function is called when the Device is disconnected. It stops
-+ * any active requests and informs the Gadget driver of the
-+ * disconnect.
-+ */
-+void dwc_otg_pcd_stop(dwc_otg_pcd_t *pcd)
-+{
-+ int i, num_in_eps, num_out_eps;
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+
-+ num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
-+ num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__);
-+ /* don't disconnect drivers more than once */
-+ if (pcd->ep0state == EP0_DISCONNECT) {
-+ DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__);
-+ return;
-+ }
-+ pcd->ep0state = EP0_DISCONNECT;
-+
-+ /* Reset the OTG state. */
-+ dwc_otg_pcd_update_otg(pcd, 1);
-+
-+ /* Disable the NP Tx Fifo Empty Interrupt. */
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Flush the FIFOs */
-+ /**@todo NGS Flush Periodic FIFOs */
-+ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10);
-+ dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd));
-+
-+ /* prevent new request submissions, kill any outstanding requests */
-+ ep = &pcd->ep0;
-+ dwc_otg_request_nuke(ep);
-+ /* prevent new request submissions, kill any outstanding requests */
-+ for (i = 0; i < num_in_eps; i++)
-+ {
-+ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i];
-+ dwc_otg_request_nuke(ep);
-+ }
-+ /* prevent new request submissions, kill any outstanding requests */
-+ for (i = 0; i < num_out_eps; i++)
-+ {
-+ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i];
-+ dwc_otg_request_nuke(ep);
-+ }
-+
-+ /* report disconnect; the driver is already quiesced */
-+ if (pcd->driver && pcd->driver->disconnect) {
-+ SPIN_UNLOCK(&pcd->lock);
-+ pcd->driver->disconnect(&pcd->gadget);
-+ SPIN_LOCK(&pcd->lock);
-+ }
-+}
-+
-+/**
-+ * This interrupt indicates that ...
-+ */
-+int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t *pcd)
-+{
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ gintsts_data_t gintsts;
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "i2cintr");
-+ intr_mask.b.i2cintr = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.i2cintr = 1;
-+ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+ return 1;
-+}
-+
-+
-+/**
-+ * This interrupt indicates that ...
-+ */
-+int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t *pcd)
-+{
-+ gintsts_data_t gintsts;
-+#if defined(VERBOSE)
-+ DWC_PRINT("Early Suspend Detected\n");
-+#endif
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.erlysuspend = 1;
-+ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+ return 1;
-+}
-+
-+/**
-+ * This function configures EPO to receive SETUP packets.
-+ *
-+ * @todo NGS: Update the comments from the HW FS.
-+ *
-+ * -# Program the following fields in the endpoint specific registers
-+ * for Control OUT EP 0, in order to receive a setup packet
-+ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
-+ * setup packets)
-+ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
-+ * to back setup packets)
-+ * - In DMA mode, DOEPDMA0 Register with a memory address to
-+ * store any setup packets received
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param pcd Programming view of the PCD.
-+ */
-+static inline void ep0_out_start(dwc_otg_core_if_t *core_if, dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ deptsiz0_data_t doeptsize0 = { .d32 = 0};
-+ dwc_otg_dma_desc_t* dma_desc;
-+ depctl_data_t doepctl = { .d32 = 0 };
-+
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV,"%s() doepctl0=%0x\n", __func__,
-+ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
-+#endif
-+
-+ doeptsize0.b.supcnt = 3;
-+ doeptsize0.b.pktcnt = 1;
-+ doeptsize0.b.xfersize = 8*3;
-+
-+
-+ if (core_if->dma_enable) {
-+ if (!core_if->dma_desc_enable) {
-+ /** put here as for Hermes mode deptisz register should not be written */
-+ dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz,
-+ doeptsize0.d32);
-+
-+ /** @todo dma needs to handle multiple setup packets (up to 3) */
-+ VERIFY_PCD_DMA_ADDR(pcd->setup_pkt_dma_handle);
-+
-+ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma,
-+ pcd->setup_pkt_dma_handle);
-+ } else {
-+ dev_if->setup_desc_index = (dev_if->setup_desc_index + 1) & 1;
-+ dma_desc = dev_if->setup_desc_addr[dev_if->setup_desc_index];
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket;
-+ dma_desc->buf = pcd->setup_pkt_dma_handle;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ /** DOEPDMA0 Register write */
-+ VERIFY_PCD_DMA_ADDR(dev_if->dma_setup_desc_addr[dev_if->setup_desc_index]);
-+ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma, dev_if->dma_setup_desc_addr[dev_if->setup_desc_index]);
-+ }
-+
-+ } else {
-+ /** put here as for Hermes mode deptisz register should not be written */
-+ dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz,
-+ doeptsize0.d32);
-+ }
-+
-+ /** DOEPCTL0 Register write */
-+ doepctl.b.epena = 1;
-+ doepctl.b.cnak = 1;
-+ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
-+
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
-+ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
-+ DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
-+ dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
-+#endif
-+}
-+
-+
-+/**
-+ * This interrupt occurs when a USB Reset is detected. When the USB
-+ * Reset Interrupt occurs the device state is set to DEFAULT and the
-+ * EP0 state is set to IDLE.
-+ * -# Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1)
-+ * -# Unmask the following interrupt bits
-+ * - DAINTMSK.INEP0 = 1 (Control 0 IN endpoint)
-+ * - DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint)
-+ * - DOEPMSK.SETUP = 1
-+ * - DOEPMSK.XferCompl = 1
-+ * - DIEPMSK.XferCompl = 1
-+ * - DIEPMSK.TimeOut = 1
-+ * -# Program the following fields in the endpoint specific registers
-+ * for Control OUT EP 0, in order to receive a setup packet
-+ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
-+ * setup packets)
-+ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
-+ * to back setup packets)
-+ * - In DMA mode, DOEPDMA0 Register with a memory address to
-+ * store any setup packets received
-+ * At this point, all the required initialization, except for enabling
-+ * the control 0 OUT endpoint is done, for receiving SETUP packets.
-+ */
-+int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ depctl_data_t doepctl = { .d32 = 0};
-+
-+ daint_data_t daintmsk = { .d32 = 0};
-+ doepmsk_data_t doepmsk = { .d32 = 0};
-+ diepmsk_data_t diepmsk = { .d32 = 0};
-+
-+ dcfg_data_t dcfg = { .d32=0 };
-+ grstctl_t resetctl = { .d32=0 };
-+ dctl_data_t dctl = {.d32=0};
-+ int i = 0;
-+ gintsts_data_t gintsts;
-+
-+ DWC_PRINT("USB RESET\n");
-+#ifdef DWC_EN_ISOC
-+ for(i = 1;i < 16; ++i)
-+ {
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+ ep = get_in_ep(pcd,i);
-+ if(ep != 0){
-+ dwc_ep = &ep->dwc_ep;
-+ dwc_ep->next_frame = 0xffffffff;
-+ }
-+ }
-+#endif /* DWC_EN_ISOC */
-+
-+ /* reset the HNP settings */
-+ dwc_otg_pcd_update_otg(pcd, 1);
-+
-+ /* Clear the Remote Wakeup Signalling */
-+ dctl.b.rmtwkupsig = 1;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl,
-+ dctl.d32, 0);
-+
-+ /* Set NAK for all OUT EPs */
-+ doepctl.b.snak = 1;
-+ for (i=0; i <= dev_if->num_out_eps; i++)
-+ {
-+ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl,
-+ doepctl.d32);
-+ }
-+
-+ /* Flush the NP Tx FIFO */
-+ dwc_otg_flush_tx_fifo(core_if, 0x10);
-+ /* Flush the Learning Queue */
-+ resetctl.b.intknqflsh = 1;
-+ dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
-+
-+ if(core_if->multiproc_int_enable) {
-+ daintmsk.b.inep0 = 1;
-+ daintmsk.b.outep0 = 1;
-+ dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, daintmsk.d32);
-+
-+ doepmsk.b.setup = 1;
-+ doepmsk.b.xfercompl = 1;
-+ doepmsk.b.ahberr = 1;
-+ doepmsk.b.epdisabled = 1;
-+
-+ if(core_if->dma_desc_enable) {
-+ doepmsk.b.stsphsercvd = 1;
-+ doepmsk.b.bna = 1;
-+ }
-+/*
-+ doepmsk.b.babble = 1;
-+ doepmsk.b.nyet = 1;
-+
-+ if(core_if->dma_enable) {
-+ doepmsk.b.nak = 1;
-+ }
-+*/
-+ dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[0], doepmsk.d32);
-+
-+ diepmsk.b.xfercompl = 1;
-+ diepmsk.b.timeout = 1;
-+ diepmsk.b.epdisabled = 1;
-+ diepmsk.b.ahberr = 1;
-+ diepmsk.b.intknepmis = 1;
-+
-+ if(core_if->dma_desc_enable) {
-+ diepmsk.b.bna = 1;
-+ }
-+/*
-+ if(core_if->dma_enable) {
-+ diepmsk.b.nak = 1;
-+ }
-+*/
-+ dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], diepmsk.d32);
-+ } else{
-+ daintmsk.b.inep0 = 1;
-+ daintmsk.b.outep0 = 1;
-+ dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, daintmsk.d32);
-+
-+ doepmsk.b.setup = 1;
-+ doepmsk.b.xfercompl = 1;
-+ doepmsk.b.ahberr = 1;
-+ doepmsk.b.epdisabled = 1;
-+
-+ if(core_if->dma_desc_enable) {
-+ doepmsk.b.stsphsercvd = 1;
-+ doepmsk.b.bna = 1;
-+ }
-+/*
-+ doepmsk.b.babble = 1;
-+ doepmsk.b.nyet = 1;
-+ doepmsk.b.nak = 1;
-+*/
-+ dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32);
-+
-+ diepmsk.b.xfercompl = 1;
-+ diepmsk.b.timeout = 1;
-+ diepmsk.b.epdisabled = 1;
-+ diepmsk.b.ahberr = 1;
-+ diepmsk.b.intknepmis = 1;
-+
-+ if(core_if->dma_desc_enable) {
-+ diepmsk.b.bna = 1;
-+ }
-+
-+// diepmsk.b.nak = 1;
-+
-+ dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32);
-+ }
-+
-+ /* Reset Device Address */
-+ dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
-+ dcfg.b.devaddr = 0;
-+ dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
-+
-+ /* setup EP0 to receive SETUP packets */
-+ ep0_out_start(core_if, pcd);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.usbreset = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Get the device speed from the device status register and convert it
-+ * to USB speed constant.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static int get_device_speed(dwc_otg_core_if_t *core_if)
-+{
-+ dsts_data_t dsts;
-+ enum usb_device_speed speed = USB_SPEED_UNKNOWN;
-+ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ switch (dsts.b.enumspd) {
-+ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
-+ speed = USB_SPEED_HIGH;
-+ break;
-+ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
-+ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
-+ speed = USB_SPEED_FULL;
-+ break;
-+
-+ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
-+ speed = USB_SPEED_LOW;
-+ break;
-+ }
-+
-+ return speed;
-+}
-+
-+/**
-+ * Read the device status register and set the device speed in the
-+ * data structure.
-+ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate.
-+ */
-+int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ gintsts_data_t gintsts;
-+ gusbcfg_data_t gusbcfg;
-+ dwc_otg_core_global_regs_t *global_regs =
-+ GET_CORE_IF(pcd)->core_global_regs;
-+ uint8_t utmi16b, utmi8b;
-+// DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n");
-+ DWC_PRINT("SPEED ENUM\n");
-+
-+ if (GET_CORE_IF(pcd)->snpsid >= 0x4F54260A) {
-+ utmi16b = 6;
-+ utmi8b = 9;
-+ } else {
-+ utmi16b = 4;
-+ utmi8b = 8;
-+ }
-+ dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep);
-+
-+#ifdef DEBUG_EP0
-+ print_ep0_state(pcd);
-+#endif
-+
-+ if (pcd->ep0state == EP0_DISCONNECT) {
-+ pcd->ep0state = EP0_IDLE;
-+ }
-+ else if (pcd->ep0state == EP0_STALL) {
-+ pcd->ep0state = EP0_IDLE;
-+ }
-+
-+ pcd->ep0state = EP0_IDLE;
-+
-+ ep0->stopped = 0;
-+
-+ pcd->gadget.speed = get_device_speed(GET_CORE_IF(pcd));
-+
-+ /* Set USB turnaround time based on device speed and PHY interface. */
-+ gusbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ if (pcd->gadget.speed == USB_SPEED_HIGH) {
-+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_ULPI) {
-+ /* ULPI interface */
-+ gusbcfg.b.usbtrdtim = 9;
-+ }
-+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI) {
-+ /* UTMI+ interface */
-+ if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) {
-+ gusbcfg.b.usbtrdtim = utmi8b;
-+ }
-+ else if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 1) {
-+ gusbcfg.b.usbtrdtim = utmi16b;
-+ }
-+ else if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 8) {
-+ gusbcfg.b.usbtrdtim = utmi8b;
-+ }
-+ else {
-+ gusbcfg.b.usbtrdtim = utmi16b;
-+ }
-+ }
-+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) {
-+ /* UTMI+ OR ULPI interface */
-+ if (gusbcfg.b.ulpi_utmi_sel == 1) {
-+ /* ULPI interface */
-+ gusbcfg.b.usbtrdtim = 9;
-+ }
-+ else {
-+ /* UTMI+ interface */
-+ if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 16) {
-+ gusbcfg.b.usbtrdtim = utmi16b;
-+ }
-+ else {
-+ gusbcfg.b.usbtrdtim = utmi8b;
-+ }
-+ }
-+ }
-+ }
-+ else {
-+ /* Full or low speed */
-+ gusbcfg.b.usbtrdtim = 9;
-+ }
-+ dwc_write_reg32(&global_regs->gusbcfg, gusbcfg.d32);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.enumdone = 1;
-+ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that the ISO OUT Packet was dropped due to
-+ * Rx FIFO full or Rx Status Queue Full. If this interrupt occurs
-+ * read all the data from the Rx FIFO.
-+ */
-+int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t *pcd)
-+{
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ gintsts_data_t gintsts;
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
-+ "ISOC Out Dropped");
-+
-+ intr_mask.b.isooutdrop = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Clear interrupt */
-+
-+ gintsts.d32 = 0;
-+ gintsts.b.isooutdrop = 1;
-+ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates the end of the portion of the micro-frame
-+ * for periodic transactions. If there is a periodic transaction for
-+ * the next frame, load the packets into the EP periodic Tx FIFO.
-+ */
-+int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t *pcd)
-+{
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ gintsts_data_t gintsts;
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "EOP");
-+
-+ intr_mask.b.eopframe = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.eopframe = 1;
-+ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that EP of the packet on the top of the
-+ * non-periodic Tx FIFO does not match EP of the IN Token received.
-+ *
-+ * The "Device IN Token Queue" Registers are read to determine the
-+ * order the IN Tokens have been received. The non-periodic Tx FIFO
-+ * is flushed, so it can be reloaded in the order seen in the IN Token
-+ * Queue.
-+ */
-+int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_core_if_t *core_if)
-+{
-+ gintsts_data_t gintsts;
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.epmismatch = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This funcion stalls EP0.
-+ */
-+static inline void ep0_do_stall(dwc_otg_pcd_t *pcd, const int err_val)
-+{
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ struct usb_ctrlrequest *ctrl = &pcd->setup_pkt->req;
-+ DWC_WARN("req %02x.%02x protocol STALL; err %d\n",
-+ ctrl->bRequestType, ctrl->bRequest, err_val);
-+
-+ ep0->dwc_ep.is_in = 1;
-+ dwc_otg_ep_set_stall(pcd->otg_dev->core_if, &ep0->dwc_ep);
-+ pcd->ep0.stopped = 1;
-+ pcd->ep0state = EP0_IDLE;
-+ ep0_out_start(GET_CORE_IF(pcd), pcd);
-+}
-+
-+/**
-+ * This functions delegates the setup command to the gadget driver.
-+ */
-+static inline void do_gadget_setup(dwc_otg_pcd_t *pcd,
-+ struct usb_ctrlrequest * ctrl)
-+{
-+ int ret = 0;
-+ if (pcd->driver && pcd->driver->setup) {
-+ SPIN_UNLOCK(&pcd->lock);
-+ ret = pcd->driver->setup(&pcd->gadget, ctrl);
-+ SPIN_LOCK(&pcd->lock);
-+ if (ret < 0) {
-+ ep0_do_stall(pcd, ret);
-+ }
-+
-+ /** @todo This is a g_file_storage gadget driver specific
-+ * workaround: a DELAYED_STATUS result from the fsg_setup
-+ * routine will result in the gadget queueing a EP0 IN status
-+ * phase for a two-stage control transfer. Exactly the same as
-+ * a SET_CONFIGURATION/SET_INTERFACE except that this is a class
-+ * specific request. Need a generic way to know when the gadget
-+ * driver will queue the status phase. Can we assume when we
-+ * call the gadget driver setup() function that it will always
-+ * queue and require the following flag? Need to look into
-+ * this.
-+ */
-+
-+ if (ret == 256 + 999) {
-+ pcd->request_config = 1;
-+ }
-+ }
-+}
-+
-+/**
-+ * This function starts the Zero-Length Packet for the IN status phase
-+ * of a 2 stage control transfer.
-+ */
-+static inline void do_setup_in_status_phase(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ if (pcd->ep0state == EP0_STALL) {
-+ return;
-+ }
-+
-+ pcd->ep0state = EP0_IN_STATUS_PHASE;
-+
-+ /* Prepare for more SETUP Packets */
-+ DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n");
-+ ep0->dwc_ep.xfer_len = 0;
-+ ep0->dwc_ep.xfer_count = 0;
-+ ep0->dwc_ep.is_in = 1;
-+ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
-+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-+
-+ /* Prepare for more SETUP Packets */
-+// if(GET_CORE_IF(pcd)->dma_enable == 0) ep0_out_start(GET_CORE_IF(pcd), pcd);
-+}
-+
-+/**
-+ * This function starts the Zero-Length Packet for the OUT status phase
-+ * of a 2 stage control transfer.
-+ */
-+static inline void do_setup_out_status_phase(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ if (pcd->ep0state == EP0_STALL) {
-+ DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n");
-+ return;
-+ }
-+ pcd->ep0state = EP0_OUT_STATUS_PHASE;
-+
-+ DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n");
-+ ep0->dwc_ep.xfer_len = 0;
-+ ep0->dwc_ep.xfer_count = 0;
-+ ep0->dwc_ep.is_in = 0;
-+ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
-+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-+
-+ /* Prepare for more SETUP Packets */
-+ if(GET_CORE_IF(pcd)->dma_enable == 0) {
-+ ep0_out_start(GET_CORE_IF(pcd), pcd);
-+ }
-+}
-+
-+/**
-+ * Clear the EP halt (STALL) and if pending requests start the
-+ * transfer.
-+ */
-+static inline void pcd_clear_halt(dwc_otg_pcd_t *pcd, dwc_otg_pcd_ep_t *ep)
-+{
-+ if(ep->dwc_ep.stall_clear_flag == 0)
-+ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
-+
-+ /* Reactive the EP */
-+ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
-+ if (ep->stopped) {
-+ ep->stopped = 0;
-+ /* If there is a request in the EP queue start it */
-+
-+ /** @todo FIXME: this causes an EP mismatch in DMA mode.
-+ * epmismatch not yet implemented. */
-+
-+ /*
-+ * Above fixme is solved by implmenting a tasklet to call the
-+ * start_next_request(), outside of interrupt context at some
-+ * time after the current time, after a clear-halt setup packet.
-+ * Still need to implement ep mismatch in the future if a gadget
-+ * ever uses more than one endpoint at once
-+ */
-+ ep->queue_sof = 1;
-+ tasklet_schedule (pcd->start_xfer_tasklet);
-+ }
-+ /* Start Control Status Phase */
-+ do_setup_in_status_phase(pcd);
-+}
-+
-+/**
-+ * This function is called when the SET_FEATURE TEST_MODE Setup packet
-+ * is sent from the host. The Device Control register is written with
-+ * the Test Mode bits set to the specified Test Mode. This is done as
-+ * a tasklet so that the "Status" phase of the control transfer
-+ * completes before transmitting the TEST packets.
-+ *
-+ * @todo This has not been tested since the tasklet struct was put
-+ * into the PCD struct!
-+ *
-+ */
-+static void do_test_mode(unsigned long data)
-+{
-+ dctl_data_t dctl;
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)data;
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ int test_mode = pcd->test_mode;
-+
-+
-+// DWC_WARN("%s() has not been tested since being rewritten!\n", __func__);
-+
-+ dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl);
-+ switch (test_mode) {
-+ case 1: // TEST_J
-+ dctl.b.tstctl = 1;
-+ break;
-+
-+ case 2: // TEST_K
-+ dctl.b.tstctl = 2;
-+ break;
-+
-+ case 3: // TEST_SE0_NAK
-+ dctl.b.tstctl = 3;
-+ break;
-+
-+ case 4: // TEST_PACKET
-+ dctl.b.tstctl = 4;
-+ break;
-+
-+ case 5: // TEST_FORCE_ENABLE
-+ dctl.b.tstctl = 5;
-+ break;
-+ }
-+ dwc_write_reg32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
-+}
-+
-+/**
-+ * This function process the GET_STATUS Setup Commands.
-+ */
-+static inline void do_get_status(dwc_otg_pcd_t *pcd)
-+{
-+ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ uint16_t *status = pcd->status_buf;
-+
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD,
-+ "GET_STATUS %02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bRequestType, ctrl.bRequest,
-+ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-+#endif
-+
-+ switch (ctrl.bRequestType & USB_RECIP_MASK) {
-+ case USB_RECIP_DEVICE:
-+ *status = 0x1; /* Self powered */
-+ *status |= pcd->remote_wakeup_enable << 1;
-+ break;
-+
-+ case USB_RECIP_INTERFACE:
-+ *status = 0;
-+ break;
-+
-+ case USB_RECIP_ENDPOINT:
-+ ep = get_ep_by_addr(pcd, ctrl.wIndex);
-+ if (ep == 0 || ctrl.wLength > 2) {
-+ ep0_do_stall(pcd, -EOPNOTSUPP);
-+ return;
-+ }
-+ /** @todo check for EP stall */
-+ *status = ep->stopped;
-+ break;
-+ }
-+ pcd->ep0_pending = 1;
-+ ep0->dwc_ep.start_xfer_buff = (uint8_t *)status;
-+ ep0->dwc_ep.xfer_buff = (uint8_t *)status;
-+ ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle;
-+ ep0->dwc_ep.xfer_len = 2;
-+ ep0->dwc_ep.xfer_count = 0;
-+ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
-+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-+}
-+/**
-+ * This function process the SET_FEATURE Setup Commands.
-+ */
-+static inline void do_set_feature(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
-+ dwc_otg_pcd_ep_t *ep = 0;
-+ int32_t otg_cap_param = core_if->core_params->otg_cap;
-+ gotgctl_data_t gotgctl = { .d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bRequestType, ctrl.bRequest,
-+ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-+ DWC_DEBUGPL(DBG_PCD,"otg_cap=%d\n", otg_cap_param);
-+
-+
-+ switch (ctrl.bRequestType & USB_RECIP_MASK) {
-+ case USB_RECIP_DEVICE:
-+ switch (ctrl.wValue) {
-+ case USB_DEVICE_REMOTE_WAKEUP:
-+ pcd->remote_wakeup_enable = 1;
-+ break;
-+
-+ case USB_DEVICE_TEST_MODE:
-+ /* Setup the Test Mode tasklet to do the Test
-+ * Packet generation after the SETUP Status
-+ * phase has completed. */
-+
-+ /** @todo This has not been tested since the
-+ * tasklet struct was put into the PCD
-+ * struct! */
-+ pcd->test_mode_tasklet.next = 0;
-+ pcd->test_mode_tasklet.state = 0;
-+ atomic_set(&pcd->test_mode_tasklet.count, 0);
-+ pcd->test_mode_tasklet.func = do_test_mode;
-+ pcd->test_mode_tasklet.data = (unsigned long)pcd;
-+ pcd->test_mode = ctrl.wIndex >> 8;
-+ tasklet_schedule(&pcd->test_mode_tasklet);
-+ break;
-+
-+ case USB_DEVICE_B_HNP_ENABLE:
-+ DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
-+
-+ /* dev may initiate HNP */
-+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
-+ pcd->b_hnp_enable = 1;
-+ dwc_otg_pcd_update_otg(pcd, 0);
-+ DWC_DEBUGPL(DBG_PCD, "Request B HNP\n");
-+ /**@todo Is the gotgctl.devhnpen cleared
-+ * by a USB Reset? */
-+ gotgctl.b.devhnpen = 1;
-+ gotgctl.b.hnpreq = 1;
-+ dwc_write_reg32(&global_regs->gotgctl, gotgctl.d32);
-+ }
-+ else {
-+ ep0_do_stall(pcd, -EOPNOTSUPP);
-+ }
-+ break;
-+
-+ case USB_DEVICE_A_HNP_SUPPORT:
-+ /* RH port supports HNP */
-+ DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n");
-+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
-+ pcd->a_hnp_support = 1;
-+ dwc_otg_pcd_update_otg(pcd, 0);
-+ }
-+ else {
-+ ep0_do_stall(pcd, -EOPNOTSUPP);
-+ }
-+ break;
-+
-+ case USB_DEVICE_A_ALT_HNP_SUPPORT:
-+ /* other RH port does */
-+ DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
-+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
-+ pcd->a_alt_hnp_support = 1;
-+ dwc_otg_pcd_update_otg(pcd, 0);
-+ }
-+ else {
-+ ep0_do_stall(pcd, -EOPNOTSUPP);
-+ }
-+ break;
-+ }
-+ do_setup_in_status_phase(pcd);
-+ break;
-+
-+ case USB_RECIP_INTERFACE:
-+ do_gadget_setup(pcd, &ctrl);
-+ break;
-+
-+ case USB_RECIP_ENDPOINT:
-+ if (ctrl.wValue == USB_ENDPOINT_HALT) {
-+ ep = get_ep_by_addr(pcd, ctrl.wIndex);
-+ if (ep == 0) {
-+ ep0_do_stall(pcd, -EOPNOTSUPP);
-+ return;
-+ }
-+ ep->stopped = 1;
-+ dwc_otg_ep_set_stall(core_if, &ep->dwc_ep);
-+ }
-+ do_setup_in_status_phase(pcd);
-+ break;
-+ }
-+}
-+
-+/**
-+ * This function process the CLEAR_FEATURE Setup Commands.
-+ */
-+static inline void do_clear_feature(dwc_otg_pcd_t *pcd)
-+{
-+ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
-+ dwc_otg_pcd_ep_t *ep = 0;
-+
-+ DWC_DEBUGPL(DBG_PCD,
-+ "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bRequestType, ctrl.bRequest,
-+ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-+
-+ switch (ctrl.bRequestType & USB_RECIP_MASK) {
-+ case USB_RECIP_DEVICE:
-+ switch (ctrl.wValue) {
-+ case USB_DEVICE_REMOTE_WAKEUP:
-+ pcd->remote_wakeup_enable = 0;
-+ break;
-+
-+ case USB_DEVICE_TEST_MODE:
-+ /** @todo Add CLEAR_FEATURE for TEST modes. */
-+ break;
-+ }
-+ do_setup_in_status_phase(pcd);
-+ break;
-+
-+ case USB_RECIP_ENDPOINT:
-+ ep = get_ep_by_addr(pcd, ctrl.wIndex);
-+ if (ep == 0) {
-+ ep0_do_stall(pcd, -EOPNOTSUPP);
-+ return;
-+ }
-+
-+ pcd_clear_halt(pcd, ep);
-+
-+ break;
-+ }
-+}
-+
-+/**
-+ * This function process the SET_ADDRESS Setup Commands.
-+ */
-+static inline void do_set_address(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
-+ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
-+
-+ if (ctrl.bRequestType == USB_RECIP_DEVICE) {
-+ dcfg_data_t dcfg = {.d32=0};
-+
-+#ifdef DEBUG_EP0
-+// DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue);
-+#endif
-+ dcfg.b.devaddr = ctrl.wValue;
-+ dwc_modify_reg32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32);
-+ do_setup_in_status_phase(pcd);
-+ }
-+}
-+
-+/**
-+ * This function processes SETUP commands. In Linux, the USB Command
-+ * processing is done in two places - the first being the PCD and the
-+ * second in the Gadget Driver (for example, the File-Backed Storage
-+ * Gadget Driver).
-+ *
-+ * <table>
-+ * <tr><td>Command </td><td>Driver </td><td>Description</td></tr>
-+ *
-+ * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as
-+ * defined in chapter 9 of the USB 2.0 Specification chapter 9
-+ * </td></tr>
-+ *
-+ * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint
-+ * requests are the ENDPOINT_HALT feature is procesed, all others the
-+ * interface requests are ignored.</td></tr>
-+ *
-+ * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint
-+ * requests are processed by the PCD. Interface requests are passed
-+ * to the Gadget Driver.</td></tr>
-+ *
-+ * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg,
-+ * with device address received </td></tr>
-+ *
-+ * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the
-+ * requested descriptor</td></tr>
-+ *
-+ * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional -
-+ * not implemented by any of the existing Gadget Drivers.</td></tr>
-+ *
-+ * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable
-+ * all EPs and enable EPs for new configuration.</td></tr>
-+ *
-+ * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return
-+ * the current configuration</td></tr>
-+ *
-+ * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all
-+ * EPs and enable EPs for new configuration.</td></tr>
-+ *
-+ * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the
-+ * current interface.</td></tr>
-+ *
-+ * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug
-+ * message.</td></tr>
-+ * </table>
-+ *
-+ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are
-+ * processed by pcd_setup. Calling the Function Driver's setup function from
-+ * pcd_setup processes the gadget SETUP commands.
-+ */
-+static inline void pcd_setup(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+
-+ deptsiz0_data_t doeptsize0 = { .d32 = 0};
-+
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bRequestType, ctrl.bRequest,
-+ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-+#endif
-+
-+ doeptsize0.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doeptsiz);
-+
-+ /** @todo handle > 1 setup packet , assert error for now */
-+
-+ if (core_if->dma_enable && core_if->dma_desc_enable == 0 && (doeptsize0.b.supcnt < 2)) {
-+ DWC_ERROR ("\n\n----------- CANNOT handle > 1 setup packet in DMA mode\n\n");
-+ }
-+
-+ /* Clean up the request queue */
-+ dwc_otg_request_nuke(ep0);
-+ ep0->stopped = 0;
-+
-+ if (ctrl.bRequestType & USB_DIR_IN) {
-+ ep0->dwc_ep.is_in = 1;
-+ pcd->ep0state = EP0_IN_DATA_PHASE;
-+ }
-+ else {
-+ ep0->dwc_ep.is_in = 0;
-+ pcd->ep0state = EP0_OUT_DATA_PHASE;
-+ }
-+
-+ if(ctrl.wLength == 0) {
-+ ep0->dwc_ep.is_in = 1;
-+ pcd->ep0state = EP0_IN_STATUS_PHASE;
-+ }
-+
-+ if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) {
-+ /* handle non-standard (class/vendor) requests in the gadget driver */
-+ do_gadget_setup(pcd, &ctrl);
-+ return;
-+ }
-+
-+ /** @todo NGS: Handle bad setup packet? */
-+
-+///////////////////////////////////////////
-+//// --- Standard Request handling --- ////
-+
-+ switch (ctrl.bRequest) {
-+ case USB_REQ_GET_STATUS:
-+ do_get_status(pcd);
-+ break;
-+
-+ case USB_REQ_CLEAR_FEATURE:
-+ do_clear_feature(pcd);
-+ break;
-+
-+ case USB_REQ_SET_FEATURE:
-+ do_set_feature(pcd);
-+ break;
-+
-+ case USB_REQ_SET_ADDRESS:
-+ do_set_address(pcd);
-+ break;
-+
-+ case USB_REQ_SET_INTERFACE:
-+ case USB_REQ_SET_CONFIGURATION:
-+// _pcd->request_config = 1; /* Configuration changed */
-+ do_gadget_setup(pcd, &ctrl);
-+ break;
-+
-+ case USB_REQ_SYNCH_FRAME:
-+ do_gadget_setup(pcd, &ctrl);
-+ break;
-+
-+ default:
-+ /* Call the Gadget Driver's setup functions */
-+ do_gadget_setup(pcd, &ctrl);
-+ break;
-+ }
-+}
-+
-+/**
-+ * This function completes the ep0 control transfer.
-+ */
-+static int32_t ep0_complete_request(dwc_otg_pcd_ep_t *ep)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ dwc_otg_dev_in_ep_regs_t *in_ep_regs =
-+ dev_if->in_ep_regs[ep->dwc_ep.num];
-+#ifdef DEBUG_EP0
-+ dwc_otg_dev_out_ep_regs_t *out_ep_regs =
-+ dev_if->out_ep_regs[ep->dwc_ep.num];
-+#endif
-+ deptsiz0_data_t deptsiz;
-+ desc_sts_data_t desc_sts;
-+ dwc_otg_pcd_request_t *req;
-+ int is_last = 0;
-+ dwc_otg_pcd_t *pcd = ep->pcd;
-+
-+ //DWC_DEBUGPL(DBG_PCDV, "%s() %s\n", __func__, _ep->ep.name);
-+
-+ if (pcd->ep0_pending && list_empty(&ep->queue)) {
-+ if (ep->dwc_ep.is_in) {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n");
-+#endif
-+ do_setup_out_status_phase(pcd);
-+ }
-+ else {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n");
-+#endif
-+ do_setup_in_status_phase(pcd);
-+ }
-+ pcd->ep0_pending = 0;
-+ return 1;
-+ }
-+
-+ if (list_empty(&ep->queue)) {
-+ return 0;
-+ }
-+ req = list_entry(ep->queue.next, dwc_otg_pcd_request_t, queue);
-+
-+
-+ if (pcd->ep0state == EP0_OUT_STATUS_PHASE || pcd->ep0state == EP0_IN_STATUS_PHASE) {
-+ is_last = 1;
-+ }
-+ else if (ep->dwc_ep.is_in) {
-+ deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz);
-+ if(core_if->dma_desc_enable != 0)
-+ desc_sts.d32 = readl(dev_if->in_desc_addr);
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n",
-+ ep->ep.name, ep->dwc_ep.xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+#endif
-+
-+ if (((core_if->dma_desc_enable == 0) && (deptsiz.b.xfersize == 0)) ||
-+ ((core_if->dma_desc_enable != 0) && (desc_sts.b.bytes == 0))) {
-+ req->req.actual = ep->dwc_ep.xfer_count;
-+ /* Is a Zero Len Packet needed? */
-+ if (req->req.zero) {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n");
-+#endif
-+ req->req.zero = 0;
-+ }
-+ do_setup_out_status_phase(pcd);
-+ }
-+ }
-+ else {
-+ /* ep0-OUT */
-+#ifdef DEBUG_EP0
-+ deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz);
-+ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xsize=%d pktcnt=%d\n",
-+ ep->ep.name, ep->dwc_ep.xfer_len,
-+ deptsiz.b.xfersize,
-+ deptsiz.b.pktcnt);
-+#endif
-+ req->req.actual = ep->dwc_ep.xfer_count;
-+ /* Is a Zero Len Packet needed? */
-+ if (req->req.zero) {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n");
-+#endif
-+ req->req.zero = 0;
-+ }
-+ if(core_if->dma_desc_enable == 0)
-+ do_setup_in_status_phase(pcd);
-+ }
-+
-+ /* Complete the request */
-+ if (is_last) {
-+ dwc_otg_request_done(ep, req, 0);
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+inline void aligned_buf_patch_on_buf_dma_oep_completion(dwc_otg_pcd_ep_t *ep, uint32_t byte_count)
-+{
-+ dwc_ep_t *dwc_ep = &ep->dwc_ep;
-+ if(byte_count && dwc_ep->aligned_buf &&
-+ dwc_ep->dma_addr>=dwc_ep->aligned_dma_addr &&
-+ dwc_ep->dma_addr<=(dwc_ep->aligned_dma_addr+dwc_ep->aligned_buf_size))\
-+ {
-+ //aligned buf used, apply complete patch
-+ u32 offset=(dwc_ep->dma_addr-dwc_ep->aligned_dma_addr);
-+ memcpy(dwc_ep->start_xfer_buff+offset, dwc_ep->aligned_buf+offset, byte_count);
-+
-+ }
-+}
-+
-+/**
-+ * This function completes the request for the EP. If there are
-+ * additional requests for the EP in the queue they will be started.
-+ */
-+static void complete_ep(dwc_otg_pcd_ep_t *ep)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ dwc_otg_dev_in_ep_regs_t *in_ep_regs =
-+ dev_if->in_ep_regs[ep->dwc_ep.num];
-+ deptsiz_data_t deptsiz;
-+ desc_sts_data_t desc_sts;
-+ dwc_otg_pcd_request_t *req = 0;
-+ dwc_otg_dma_desc_t* dma_desc;
-+ uint32_t byte_count = 0;
-+ int is_last = 0;
-+ int i;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s() %s-%s\n", __func__, ep->ep.name,
-+ (ep->dwc_ep.is_in?"IN":"OUT"));
-+
-+ /* Get any pending requests */
-+ if (!list_empty(&ep->queue)) {
-+ req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
-+ queue);
-+ if (!req) {
-+ printk("complete_ep 0x%p, req = NULL!\n", ep);
-+ return;
-+ }
-+ }
-+ else {
-+ printk("complete_ep 0x%p, ep->queue empty!\n", ep);
-+ return;
-+ }
-+ DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending);
-+
-+ if (ep->dwc_ep.is_in) {
-+ deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz);
-+
-+ if (core_if->dma_enable) {
-+ //dma_unmap_single(NULL,ep->dwc_ep.dma_addr,ep->dwc_ep.xfer_count,DMA_NONE);
-+ if(core_if->dma_desc_enable == 0) {
-+ //dma_unmap_single(NULL,ep->dwc_ep.dma_addr,ep->dwc_ep.xfer_count,DMA_NONE);
-+ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
-+ byte_count = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-+DWC_DEBUGPL(DBG_PCDV,"byte_count(%.8x) = (ep->dwc_ep.xfer_len(%.8x) - ep->dwc_ep.xfer_count(%.8x)\n", byte_count ,ep->dwc_ep.xfer_len , ep->dwc_ep.xfer_count );
-+
-+ ep->dwc_ep.xfer_buff += byte_count;
-+ ep->dwc_ep.dma_addr += byte_count;
-+ ep->dwc_ep.xfer_count += byte_count;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n",
-+ ep->ep.name, ep->dwc_ep.xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+
-+
-+ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-+ //dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-+printk("Warning: transfer ended, but specified len is not accomplished!! ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, byte_count(%.8x) = (ep->dwc_ep.xfer_len(%.8x) - ep->dwc_ep.xfer_count(%.8x) - deptsiz.b.xfersize(%.8x)\n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, byte_count ,ep->dwc_ep.xfer_len , ep->dwc_ep.xfer_count , deptsiz.b.xfersize);
-+ } else if(ep->dwc_ep.sent_zlp) {
-+ /*
-+ * This fragment of code should initiate 0
-+ * length trasfer in case if it is queued
-+ * a trasfer with size divisible to EPs max
-+ * packet size and with usb_request zero field
-+ * is set, which means that after data is transfered,
-+ * it is also should be transfered
-+ * a 0 length packet at the end. For Slave and
-+ * Buffer DMA modes in this case SW has
-+ * to initiate 2 transfers one with transfer size,
-+ * and the second with 0 size. For Desriptor
-+ * DMA mode SW is able to initiate a transfer,
-+ * which will handle all the packets including
-+ * the last 0 legth.
-+ */
-+ ep->dwc_ep.sent_zlp = 0;
-+ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
-+ } else {
-+ is_last = 1;
-+ }
-+ } else {
-+ DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n",
-+ ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"),
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+ }
-+ } else {
-+
-+ dma_desc = ep->dwc_ep.desc_addr;
-+ byte_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+
-+ for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) {
-+ desc_sts.d32 = readl(dma_desc);
-+ byte_count += desc_sts.b.bytes;
-+ dma_desc++;
-+ }
-+
-+ if(byte_count == 0) {
-+ ep->dwc_ep.xfer_count = ep->dwc_ep.total_len;
-+ is_last = 1;
-+ } else {
-+ DWC_WARN("Incomplete transfer\n");
-+ }
-+ }
-+ } else {
-+ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
-+ /* Check if the whole transfer was completed,
-+ * if no, setup transfer for next portion of data
-+ */
-+ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n",
-+ ep->ep.name, ep->dwc_ep.xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-+ //dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-+printk("Warning: transfer ended, but specified len is not accomplished!! ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, ep->dwc_ep.xfer_len(%.8x) \n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, ep->dwc_ep.xfer_len );
-+ } else if(ep->dwc_ep.sent_zlp) {
-+ /*
-+ * This fragment of code should initiate 0
-+ * length trasfer in case if it is queued
-+ * a trasfer with size divisible to EPs max
-+ * packet size and with usb_request zero field
-+ * is set, which means that after data is transfered,
-+ * it is also should be transfered
-+ * a 0 length packet at the end. For Slave and
-+ * Buffer DMA modes in this case SW has
-+ * to initiate 2 transfers one with transfer size,
-+ * and the second with 0 size. For Desriptor
-+ * DMA mode SW is able to initiate a transfer,
-+ * which will handle all the packets including
-+ * the last 0 legth.
-+ */
-+ ep->dwc_ep.sent_zlp = 0;
-+ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
-+ } else {
-+ is_last = 1;
-+ }
-+ }
-+ else {
-+ DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n",
-+ ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"),
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+ }
-+ }
-+ } else {
-+ dwc_otg_dev_out_ep_regs_t *out_ep_regs =
-+ dev_if->out_ep_regs[ep->dwc_ep.num];
-+ desc_sts.d32 = 0;
-+ if(core_if->dma_enable) {
-+ //dma_unmap_single(NULL,ep->dwc_ep.dma_addr,ep->dwc_ep.xfer_count,DMA_FROM_DEVICE);
-+ if(core_if->dma_desc_enable) {
-+ DWC_WARN("\n\n%s: we need a cache invalidation here!!\n\n",__func__);
-+ dma_desc = ep->dwc_ep.desc_addr;
-+ byte_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) {
-+ desc_sts.d32 = readl(dma_desc);
-+ byte_count += desc_sts.b.bytes;
-+ dma_desc++;
-+ }
-+
-+ ep->dwc_ep.xfer_count = ep->dwc_ep.total_len
-+ - byte_count + ((4 - (ep->dwc_ep.total_len & 0x3)) & 0x3);
-+
-+ //todo: invalidate cache & aligned buf patch on completion
-+ //
-+
-+ is_last = 1;
-+ } else {
-+ deptsiz.d32 = 0;
-+ deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz);
-+
-+ byte_count = (ep->dwc_ep.xfer_len -
-+ ep->dwc_ep.xfer_count - deptsiz.b.xfersize);
-+
-+// dma_sync_single_for_device(NULL,ep->dwc_ep.dma_addr,byte_count,DMA_FROM_DEVICE);
-+
-+DWC_DEBUGPL(DBG_PCDV,"ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, byte_count(%.8x) = (ep->dwc_ep.xfer_len(%.8x) - ep->dwc_ep.xfer_count(%.8x) - deptsiz.b.xfersize(%.8x)\n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, byte_count ,ep->dwc_ep.xfer_len , ep->dwc_ep.xfer_count , deptsiz.b.xfersize);
-+ //todo: invalidate cache & aligned buf patch on completion
-+ dma_sync_single_for_device(NULL,ep->dwc_ep.dma_addr,byte_count,DMA_FROM_DEVICE);
-+ aligned_buf_patch_on_buf_dma_oep_completion(ep,byte_count);
-+
-+ ep->dwc_ep.xfer_buff += byte_count;
-+ ep->dwc_ep.dma_addr += byte_count;
-+ ep->dwc_ep.xfer_count += byte_count;
-+
-+ /* Check if the whole transfer was completed,
-+ * if no, setup transfer for next portion of data
-+ */
-+ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-+ //dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-+printk("Warning: transfer ended, but specified len is not accomplished!! ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, byte_count(%.8x) = (ep->dwc_ep.xfer_len(%.8x) - ep->dwc_ep.xfer_count(%.8x) - deptsiz.b.xfersize(%.8x)\n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, byte_count ,ep->dwc_ep.xfer_len , ep->dwc_ep.xfer_count , deptsiz.b.xfersize);
-+ }
-+ else if(ep->dwc_ep.sent_zlp) {
-+ /*
-+ * This fragment of code should initiate 0
-+ * length trasfer in case if it is queued
-+ * a trasfer with size divisible to EPs max
-+ * packet size and with usb_request zero field
-+ * is set, which means that after data is transfered,
-+ * it is also should be transfered
-+ * a 0 length packet at the end. For Slave and
-+ * Buffer DMA modes in this case SW has
-+ * to initiate 2 transfers one with transfer size,
-+ * and the second with 0 size. For Desriptor
-+ * DMA mode SW is able to initiate a transfer,
-+ * which will handle all the packets including
-+ * the last 0 legth.
-+ */
-+ ep->dwc_ep.sent_zlp = 0;
-+ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
-+ } else {
-+ is_last = 1;
-+ }
-+ }
-+ } else {
-+ /* Check if the whole transfer was completed,
-+ * if no, setup transfer for next portion of data
-+ */
-+ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-+ //dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-+printk("Warning: transfer ended, but specified len is not accomplished!! ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, ep->dwc_ep.xfer_len(%.8x) \n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, ep->dwc_ep.xfer_len );
-+ }
-+ else if(ep->dwc_ep.sent_zlp) {
-+ /*
-+ * This fragment of code should initiate 0
-+ * length trasfer in case if it is queued
-+ * a trasfer with size divisible to EPs max
-+ * packet size and with usb_request zero field
-+ * is set, which means that after data is transfered,
-+ * it is also should be transfered
-+ * a 0 length packet at the end. For Slave and
-+ * Buffer DMA modes in this case SW has
-+ * to initiate 2 transfers one with transfer size,
-+ * and the second with 0 size. For Desriptor
-+ * DMA mode SW is able to initiate a transfer,
-+ * which will handle all the packets including
-+ * the last 0 legth.
-+ */
-+ ep->dwc_ep.sent_zlp = 0;
-+ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
-+ } else {
-+ is_last = 1;
-+ }
-+ }
-+
-+#ifdef DEBUG
-+
-+ DWC_DEBUGPL(DBG_PCDV, "addr %p, %s len=%d cnt=%d xsize=%d pktcnt=%d\n",
-+ &out_ep_regs->doeptsiz, ep->ep.name, ep->dwc_ep.xfer_len,
-+ ep->dwc_ep.xfer_count,
-+ deptsiz.b.xfersize,
-+ deptsiz.b.pktcnt);
-+#endif
-+ }
-+
-+ /* Complete the request */
-+ if (is_last) {
-+ req->req.actual = ep->dwc_ep.xfer_count;
-+
-+ dwc_otg_request_done(ep, req, 0);
-+
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+
-+ /* If there is a request in the queue start it.*/
-+ start_next_request(ep);
-+ }
-+}
-+
-+
-+#ifdef DWC_EN_ISOC
-+
-+/**
-+ * This function BNA interrupt for Isochronous EPs
-+ *
-+ */
-+static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t *ep)
-+{
-+ dwc_ep_t *dwc_ep = &ep->dwc_ep;
-+ volatile uint32_t *addr;
-+ depctl_data_t depctl = {.d32 = 0};
-+ dwc_otg_pcd_t *pcd = ep->pcd;
-+ dwc_otg_dma_desc_t *dma_desc;
-+ int i;
-+
-+ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num);
-+
-+ if(dwc_ep->is_in) {
-+ desc_sts_data_t sts = {.d32 = 0};
-+ for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc)
-+ {
-+ sts.d32 = readl(&dma_desc->status);
-+ sts.b_iso_in.bs = BS_HOST_READY;
-+ writel(sts.d32,&dma_desc->status);
-+ }
-+ }
-+ else {
-+ desc_sts_data_t sts = {.d32 = 0};
-+ for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc)
-+ {
-+ sts.d32 = readl(&dma_desc->status);
-+ sts.b_iso_out.bs = BS_HOST_READY;
-+ writel(sts.d32,&dma_desc->status);
-+ }
-+ }
-+
-+ if(dwc_ep->is_in == 0){
-+ addr = &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
-+ }
-+ else{
-+ addr = &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
-+ }
-+ depctl.b.epena = 1;
-+ dwc_modify_reg32(addr,depctl.d32,depctl.d32);
-+}
-+
-+/**
-+ * This function sets latest iso packet information(non-PTI mode)
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+void set_current_pkt_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ deptsiz_data_t deptsiz = { .d32 = 0 };
-+ dma_addr_t dma_addr;
-+ uint32_t offset;
-+
-+ if(ep->proc_buf_num)
-+ dma_addr = ep->dma_addr1;
-+ else
-+ dma_addr = ep->dma_addr0;
-+
-+
-+ if(ep->is_in) {
-+ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz);
-+ offset = ep->data_per_frame;
-+ } else {
-+ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz);
-+ offset = ep->data_per_frame + (0x4 & (0x4 - (ep->data_per_frame & 0x3)));
-+ }
-+
-+ if(!deptsiz.b.xfersize) {
-+ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
-+ ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr;
-+ ep->pkt_info[ep->cur_pkt].status = 0;
-+ } else {
-+ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
-+ ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr;
-+ ep->pkt_info[ep->cur_pkt].status = -ENODATA;
-+ }
-+ ep->cur_pkt_addr += offset;
-+ ep->cur_pkt_dma_addr += offset;
-+ ep->cur_pkt++;
-+}
-+
-+/**
-+ * This function sets latest iso packet information(DDMA mode)
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dwc_ep The EP to start the transfer on.
-+ *
-+ */
-+static void set_ddma_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-+{
-+ dwc_otg_dma_desc_t* dma_desc;
-+ desc_sts_data_t sts = {.d32 = 0};
-+ iso_pkt_info_t *iso_packet;
-+ uint32_t data_per_desc;
-+ uint32_t offset;
-+ int i, j;
-+
-+ iso_packet = dwc_ep->pkt_info;
-+
-+ /** Reinit closed DMA Descriptors*/
-+ /** ISO OUT EP */
-+ if(dwc_ep->is_in == 0) {
-+ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-+ offset = 0;
-+
-+ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-+ {
-+ for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
-+ {
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+
-+ sts.d32 = readl(&dma_desc->status);
-+
-+ /* Write status in iso_packet_decsriptor */
-+ iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
-+ if(iso_packet->status) {
-+ iso_packet->status = -ENODATA;
-+ }
-+
-+ /* Received data length */
-+ if(!sts.b_iso_out.rxbytes){
-+ iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes;
-+ } else {
-+ iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes +
-+ (4 - dwc_ep->data_per_frame % 4);
-+ }
-+
-+ iso_packet->offset = offset;
-+
-+ offset += data_per_desc;
-+ dma_desc ++;
-+ iso_packet ++;
-+ }
-+ }
-+
-+ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
-+ {
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+
-+ sts.d32 = readl(&dma_desc->status);
-+
-+ /* Write status in iso_packet_decsriptor */
-+ iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
-+ if(iso_packet->status) {
-+ iso_packet->status = -ENODATA;
-+ }
-+
-+ /* Received data length */
-+ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
-+
-+ iso_packet->offset = offset;
-+
-+ offset += data_per_desc;
-+ iso_packet++;
-+ dma_desc++;
-+ }
-+
-+ sts.d32 = readl(&dma_desc->status);
-+
-+ /* Write status in iso_packet_decsriptor */
-+ iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
-+ if(iso_packet->status) {
-+ iso_packet->status = -ENODATA;
-+ }
-+ /* Received data length */
-+ if(!sts.b_iso_out.rxbytes){
-+ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
-+ } else {
-+ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes +
-+ (4 - dwc_ep->data_per_frame % 4);
-+ }
-+
-+ iso_packet->offset = offset;
-+ }
-+ else /** ISO IN EP */
-+ {
-+ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-+
-+ for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
-+ {
-+ sts.d32 = readl(&dma_desc->status);
-+
-+ /* Write status in iso packet descriptor */
-+ iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE);
-+ if(iso_packet->status != 0) {
-+ iso_packet->status = -ENODATA;
-+
-+ }
-+ /* Bytes has been transfered */
-+ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
-+
-+ dma_desc ++;
-+ iso_packet++;
-+ }
-+
-+ sts.d32 = readl(&dma_desc->status);
-+ while(sts.b_iso_in.bs == BS_DMA_BUSY) {
-+ sts.d32 = readl(&dma_desc->status);
-+ }
-+
-+ /* Write status in iso packet descriptor ??? do be done with ERROR codes*/
-+ iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE);
-+ if(iso_packet->status != 0) {
-+ iso_packet->status = -ENODATA;
-+ }
-+
-+ /* Bytes has been transfered */
-+ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
-+ }
-+}
-+
-+/**
-+ * This function reinitialize DMA Descriptors for Isochronous transfer
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dwc_ep The EP to start the transfer on.
-+ *
-+ */
-+static void reinit_ddma_iso_xfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-+{
-+ int i, j;
-+ dwc_otg_dma_desc_t* dma_desc;
-+ dma_addr_t dma_ad;
-+ volatile uint32_t *addr;
-+ desc_sts_data_t sts = { .d32 =0 };
-+ uint32_t data_per_desc;
-+
-+ if(dwc_ep->is_in == 0) {
-+ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
-+ }
-+ else {
-+ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
-+ }
-+
-+
-+ if(dwc_ep->proc_buf_num == 0) {
-+ /** Buffer 0 descriptors setup */
-+ dma_ad = dwc_ep->dma_addr0;
-+ }
-+ else {
-+ /** Buffer 1 descriptors setup */
-+ dma_ad = dwc_ep->dma_addr1;
-+ }
-+
-+
-+ /** Reinit closed DMA Descriptors*/
-+ /** ISO OUT EP */
-+ if(dwc_ep->is_in == 0) {
-+ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-+
-+ sts.b_iso_out.bs = BS_HOST_READY;
-+ sts.b_iso_out.rxsts = 0;
-+ sts.b_iso_out.l = 0;
-+ sts.b_iso_out.sp = 0;
-+ sts.b_iso_out.ioc = 0;
-+ sts.b_iso_out.pid = 0;
-+ sts.b_iso_out.framenum = 0;
-+
-+ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-+ {
-+ for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
-+ {
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ //(uint32_t)dma_ad += data_per_desc;
-+ dma_ad = (uint32_t)dma_ad + data_per_desc;
-+ dma_desc ++;
-+ }
-+ }
-+
-+ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
-+ {
-+
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ dma_desc++;
-+ //(uint32_t)dma_ad += data_per_desc;
-+ dma_ad = (uint32_t)dma_ad + data_per_desc;
-+ }
-+
-+ sts.b_iso_out.ioc = 1;
-+ sts.b_iso_out.l = dwc_ep->proc_buf_num;
-+
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+ }
-+ else /** ISO IN EP */
-+ {
-+ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-+
-+ sts.b_iso_in.bs = BS_HOST_READY;
-+ sts.b_iso_in.txsts = 0;
-+ sts.b_iso_in.sp = 0;
-+ sts.b_iso_in.ioc = 0;
-+ sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
-+ sts.b_iso_in.framenum = dwc_ep->next_frame;
-+ sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
-+ sts.b_iso_in.l = 0;
-+
-+ for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
-+ {
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ sts.b_iso_in.framenum += dwc_ep->bInterval;
-+ //(uint32_t)dma_ad += dwc_ep->data_per_frame;
-+ dma_ad = (uint32_t)dma_ad + dwc_ep->data_per_frame;
-+ dma_desc ++;
-+ }
-+
-+ sts.b_iso_in.ioc = 1;
-+ sts.b_iso_in.l = dwc_ep->proc_buf_num;
-+
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval * 1;
-+ }
-+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+}
-+
-+
-+/**
-+ * This function is to handle Iso EP transfer complete interrupt
-+ * in case Iso out packet was dropped
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dwc_ep The EP for wihich transfer complete was asserted
-+ *
-+ */
-+static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-+{
-+ uint32_t dma_addr;
-+ uint32_t drp_pkt;
-+ uint32_t drp_pkt_cnt;
-+ deptsiz_data_t deptsiz = { .d32 = 0 };
-+ depctl_data_t depctl = { .d32 = 0 };
-+ int i;
-+
-+ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz);
-+
-+ drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt;
-+ drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm);
-+
-+ /* Setting dropped packets status */
-+ for(i = 0; i < drp_pkt_cnt; ++i) {
-+ dwc_ep->pkt_info[drp_pkt].status = -ENODATA;
-+ drp_pkt ++;
-+ deptsiz.b.pktcnt--;
-+ }
-+
-+
-+ if(deptsiz.b.pktcnt > 0) {
-+ deptsiz.b.xfersize = dwc_ep->xfer_len - (dwc_ep->pkt_cnt - deptsiz.b.pktcnt) * dwc_ep->maxpacket;
-+ } else {
-+ deptsiz.b.xfersize = 0;
-+ deptsiz.b.pktcnt = 0;
-+ }
-+
-+ dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, deptsiz.d32);
-+
-+ if(deptsiz.b.pktcnt > 0) {
-+ if(dwc_ep->proc_buf_num) {
-+ dma_addr = dwc_ep->dma_addr1 + dwc_ep->xfer_len - deptsiz.b.xfersize;
-+ } else {
-+ dma_addr = dwc_ep->dma_addr0 + dwc_ep->xfer_len - deptsiz.b.xfersize;;
-+ }
-+
-+ VERIFY_PCD_DMA_ADDR(dma_addr);
-+ dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepdma, dma_addr);
-+
-+ /** Re-enable endpoint, clear nak */
-+ depctl.d32 = 0;
-+ depctl.b.epena = 1;
-+ depctl.b.cnak = 1;
-+
-+ dwc_modify_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl,
-+ depctl.d32,depctl.d32);
-+ return 0;
-+ } else {
-+ return 1;
-+ }
-+}
-+
-+/**
-+ * This function sets iso packets information(PTI mode)
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+static uint32_t set_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ int i, j;
-+ dma_addr_t dma_ad;
-+ iso_pkt_info_t *packet_info = ep->pkt_info;
-+ uint32_t offset;
-+ uint32_t frame_data;
-+ deptsiz_data_t deptsiz;
-+
-+ if(ep->proc_buf_num == 0) {
-+ /** Buffer 0 descriptors setup */
-+ dma_ad = ep->dma_addr0;
-+ }
-+ else {
-+ /** Buffer 1 descriptors setup */
-+ dma_ad = ep->dma_addr1;
-+ }
-+
-+
-+ if(ep->is_in) {
-+ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz);
-+ } else {
-+ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz);
-+ }
-+
-+ if(!deptsiz.b.xfersize) {
-+ offset = 0;
-+ for(i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm)
-+ {
-+ frame_data = ep->data_per_frame;
-+ for(j = 0; j < ep->pkt_per_frm; ++j) {
-+
-+ /* Packet status - is not set as initially
-+ * it is set to 0 and if packet was sent
-+ successfully, status field will remain 0*/
-+
-+
-+ /* Bytes has been transfered */
-+ packet_info->length = (ep->maxpacket < frame_data) ?
-+ ep->maxpacket : frame_data;
-+
-+ /* Received packet offset */
-+ packet_info->offset = offset;
-+ offset += packet_info->length;
-+ frame_data -= packet_info->length;
-+
-+ packet_info ++;
-+ }
-+ }
-+ return 1;
-+ } else {
-+ /* This is a workaround for in case of Transfer Complete with
-+ * PktDrpSts interrupts merging - in this case Transfer complete
-+ * interrupt for Isoc Out Endpoint is asserted without PktDrpSts
-+ * set and with DOEPTSIZ register non zero. Investigations showed,
-+ * that this happens when Out packet is dropped, but because of
-+ * interrupts merging during first interrupt handling PktDrpSts
-+ * bit is cleared and for next merged interrupts it is not reset.
-+ * In this case SW hadles the interrupt as if PktDrpSts bit is set.
-+ */
-+ if(ep->is_in) {
-+ return 1;
-+ } else {
-+ return handle_iso_out_pkt_dropped(core_if, ep);
-+ }
-+ }
-+}
-+
-+/**
-+ * This function is to handle Iso EP transfer complete interrupt
-+ *
-+ * @param ep The EP for which transfer complete was asserted
-+ *
-+ */
-+static void complete_iso_ep(dwc_otg_pcd_ep_t *ep)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
-+ dwc_ep_t *dwc_ep = &ep->dwc_ep;
-+ uint8_t is_last = 0;
-+
-+ if(core_if->dma_enable) {
-+ if(core_if->dma_desc_enable) {
-+ set_ddma_iso_pkts_info(core_if, dwc_ep);
-+ reinit_ddma_iso_xfer(core_if, dwc_ep);
-+ is_last = 1;
-+ } else {
-+ if(core_if->pti_enh_enable) {
-+ if(set_iso_pkts_info(core_if, dwc_ep)) {
-+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+ dwc_otg_iso_ep_start_buf_transfer(core_if, dwc_ep);
-+ is_last = 1;
-+ }
-+ } else {
-+ set_current_pkt_info(core_if, dwc_ep);
-+ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-+ is_last = 1;
-+ dwc_ep->cur_pkt = 0;
-+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+ if(dwc_ep->proc_buf_num) {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
-+ } else {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
-+ }
-+
-+ }
-+ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
-+ }
-+ }
-+ } else {
-+ set_current_pkt_info(core_if, dwc_ep);
-+ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-+ is_last = 1;
-+ dwc_ep->cur_pkt = 0;
-+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+ if(dwc_ep->proc_buf_num) {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
-+ } else {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
-+ }
-+
-+ }
-+ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
-+ }
-+ if(is_last)
-+ dwc_otg_iso_buffer_done(ep, ep->iso_req);
-+}
-+
-+#endif //DWC_EN_ISOC
-+
-+
-+/**
-+ * This function handles EP0 Control transfers.
-+ *
-+ * The state of the control tranfers are tracked in
-+ * <code>ep0state</code>.
-+ */
-+static void handle_ep0(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ desc_sts_data_t desc_sts;
-+ deptsiz0_data_t deptsiz;
-+ uint32_t byte_count;
-+
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
-+ print_ep0_state(pcd);
-+#endif
-+
-+ switch (pcd->ep0state) {
-+ case EP0_DISCONNECT:
-+ break;
-+
-+ case EP0_IDLE:
-+ pcd->request_config = 0;
-+
-+ pcd_setup(pcd);
-+ break;
-+
-+ case EP0_IN_DATA_PHASE:
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n",
-+ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"),
-+ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
-+#endif
-+
-+ if (core_if->dma_enable != 0) {
-+ /*
-+ * For EP0 we can only program 1 packet at a time so we
-+ * need to do the make calculations after each complete.
-+ * Call write_packet to make the calculations, as in
-+ * slave mode, and use those values to determine if we
-+ * can complete.
-+ */
-+ if(core_if->dma_desc_enable == 0) {
-+ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->dieptsiz);
-+ byte_count = ep0->dwc_ep.xfer_len - deptsiz.b.xfersize;
-+ }
-+ else {
-+ desc_sts.d32 = readl(core_if->dev_if->in_desc_addr);
-+ byte_count = ep0->dwc_ep.xfer_len - desc_sts.b.bytes;
-+ }
-+
-+ ep0->dwc_ep.xfer_count += byte_count;
-+ ep0->dwc_ep.xfer_buff += byte_count;
-+ ep0->dwc_ep.dma_addr += byte_count;
-+ }
-+ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
-+ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
-+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
-+ }
-+ else if(ep0->dwc_ep.sent_zlp) {
-+ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
-+ ep0->dwc_ep.sent_zlp = 0;
-+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
-+ }
-+ else {
-+ ep0_complete_request(ep0);
-+ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
-+ }
-+ break;
-+ case EP0_OUT_DATA_PHASE:
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n",
-+ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"),
-+ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
-+#endif
-+ if (core_if->dma_enable != 0) {
-+ if(core_if->dma_desc_enable == 0) {
-+ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[0]->doeptsiz);
-+ byte_count = ep0->dwc_ep.maxpacket - deptsiz.b.xfersize;
-+
-+ //todo: invalidate cache & aligned buf patch on completion
-+ dma_sync_single_for_device(NULL,ep0->dwc_ep.dma_addr,byte_count,DMA_FROM_DEVICE);
-+ aligned_buf_patch_on_buf_dma_oep_completion(ep0,byte_count);
-+ }
-+ else {
-+ desc_sts.d32 = readl(core_if->dev_if->out_desc_addr);
-+ byte_count = ep0->dwc_ep.maxpacket - desc_sts.b.bytes;
-+
-+ //todo: invalidate cache & aligned buf patch on completion
-+ //
-+
-+ }
-+ ep0->dwc_ep.xfer_count += byte_count;
-+ ep0->dwc_ep.xfer_buff += byte_count;
-+ ep0->dwc_ep.dma_addr += byte_count;
-+ }
-+ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
-+ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
-+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
-+ }
-+ else if(ep0->dwc_ep.sent_zlp) {
-+ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
-+ ep0->dwc_ep.sent_zlp = 0;
-+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
-+ }
-+ else {
-+ ep0_complete_request(ep0);
-+ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
-+ }
-+ break;
-+
-+
-+ case EP0_IN_STATUS_PHASE:
-+ case EP0_OUT_STATUS_PHASE:
-+ DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n");
-+ ep0_complete_request(ep0);
-+ pcd->ep0state = EP0_IDLE;
-+ ep0->stopped = 1;
-+ ep0->dwc_ep.is_in = 0; /* OUT for next SETUP */
-+
-+ /* Prepare for more SETUP Packets */
-+ if(core_if->dma_enable) {
-+ ep0_out_start(core_if, pcd);
-+ }
-+ break;
-+
-+ case EP0_STALL:
-+ DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n");
-+ break;
-+ }
-+#ifdef DEBUG_EP0
-+ print_ep0_state(pcd);
-+#endif
-+}
-+
-+
-+/**
-+ * Restart transfer
-+ */
-+static void restart_transfer(dwc_otg_pcd_t *pcd, const uint32_t epnum)
-+{
-+ dwc_otg_core_if_t *core_if;
-+ dwc_otg_dev_if_t *dev_if;
-+ deptsiz_data_t dieptsiz = {.d32=0};
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ ep = get_in_ep(pcd, epnum);
-+
-+#ifdef DWC_EN_ISOC
-+ if(ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
-+ return;
-+ }
-+#endif /* DWC_EN_ISOC */
-+
-+ core_if = GET_CORE_IF(pcd);
-+ dev_if = core_if->dev_if;
-+
-+ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz);
-+
-+ DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x xfer_len=%0x"
-+ " stopped=%d\n", ep->dwc_ep.xfer_buff,
-+ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len ,
-+ ep->stopped);
-+ /*
-+ * If xfersize is 0 and pktcnt in not 0, resend the last packet.
-+ */
-+ if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 &&
-+ ep->dwc_ep.start_xfer_buff != 0) {
-+ if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) {
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff;
-+ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
-+ }
-+ else {
-+ ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket;
-+ /* convert packet size to dwords. */
-+ ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket;
-+ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
-+ }
-+ ep->stopped = 0;
-+ DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x "
-+ "xfer_len=%0x stopped=%d\n",
-+ ep->dwc_ep.xfer_buff,
-+ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len ,
-+ ep->stopped
-+ );
-+ if (epnum == 0) {
-+ dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep);
-+ }
-+ else {
-+ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-+ }
-+ }
-+}
-+
-+
-+/**
-+ * handle the IN EP disable interrupt.
-+ */
-+static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t *pcd,
-+ const uint32_t epnum)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ deptsiz_data_t dieptsiz = {.d32=0};
-+ dctl_data_t dctl = {.d32=0};
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+
-+ ep = get_in_ep(pcd, epnum);
-+ dwc_ep = &ep->dwc_ep;
-+
-+ if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
-+ return;
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCD,"diepctl%d=%0x\n", epnum,
-+ dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl));
-+ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz);
-+
-+ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
-+ dieptsiz.b.pktcnt,
-+ dieptsiz.b.xfersize);
-+
-+ if (ep->stopped) {
-+ /* Flush the Tx FIFO */
-+ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
-+ /* Clear the Global IN NP NAK */
-+ dctl.d32 = 0;
-+ dctl.b.cgnpinnak = 1;
-+ dwc_modify_reg32(&dev_if->dev_global_regs->dctl,
-+ dctl.d32, 0);
-+ /* Restart the transaction */
-+ if (dieptsiz.b.pktcnt != 0 ||
-+ dieptsiz.b.xfersize != 0) {
-+ restart_transfer(pcd, epnum);
-+ }
-+ }
-+ else {
-+ /* Restart the transaction */
-+ if (dieptsiz.b.pktcnt != 0 ||
-+ dieptsiz.b.xfersize != 0) {
-+ restart_transfer(pcd, epnum);
-+ }
-+ DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n");
-+ }
-+}
-+
-+/**
-+ * Handler for the IN EP timeout handshake interrupt.
-+ */
-+static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t *pcd,
-+ const uint32_t epnum)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+
-+#ifdef DEBUG
-+ deptsiz_data_t dieptsiz = {.d32=0};
-+ uint32_t num = 0;
-+#endif
-+ dctl_data_t dctl = {.d32=0};
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+
-+ ep = get_in_ep(pcd, epnum);
-+
-+ /* Disable the NP Tx Fifo Empty Interrrupt */
-+ if (!core_if->dma_enable) {
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
-+ }
-+ /** @todo NGS Check EP type.
-+ * Implement for Periodic EPs */
-+ /*
-+ * Non-periodic EP
-+ */
-+ /* Enable the Global IN NAK Effective Interrupt */
-+ intr_mask.b.ginnakeff = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-+ 0, intr_mask.d32);
-+
-+ /* Set Global IN NAK */
-+ dctl.b.sgnpinnak = 1;
-+ dwc_modify_reg32(&dev_if->dev_global_regs->dctl,
-+ dctl.d32, dctl.d32);
-+
-+ ep->stopped = 1;
-+
-+#ifdef DEBUG
-+ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[num]->dieptsiz);
-+ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
-+ dieptsiz.b.pktcnt,
-+ dieptsiz.b.xfersize);
-+#endif
-+
-+#ifdef DISABLE_PERIODIC_EP
-+ /*
-+ * Set the NAK bit for this EP to
-+ * start the disable process.
-+ */
-+ diepctl.d32 = 0;
-+ diepctl.b.snak = 1;
-+ dwc_modify_reg32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, diepctl.d32);
-+ ep->disabling = 1;
-+ ep->stopped = 1;
-+#endif
-+}
-+
-+/**
-+ * Handler for the IN EP NAK interrupt.
-+ */
-+static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t *pcd,
-+ const uint32_t epnum)
-+{
-+ /** @todo implement ISR */
-+ dwc_otg_core_if_t* core_if;
-+ diepmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "IN EP NAK");
-+ core_if = GET_CORE_IF(pcd);
-+ intr_mask.b.nak = 1;
-+
-+ if(core_if->multiproc_int_enable) {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[epnum],
-+ intr_mask.d32, 0);
-+ } else {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepmsk,
-+ intr_mask.d32, 0);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handler for the OUT EP Babble interrupt.
-+ */
-+static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t *pcd,
-+ const uint32_t epnum)
-+{
-+ /** @todo implement ISR */
-+ dwc_otg_core_if_t* core_if;
-+ doepmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP Babble");
-+ core_if = GET_CORE_IF(pcd);
-+ intr_mask.b.babble = 1;
-+
-+ if(core_if->multiproc_int_enable) {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
-+ intr_mask.d32, 0);
-+ } else {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
-+ intr_mask.d32, 0);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handler for the OUT EP NAK interrupt.
-+ */
-+static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t *pcd,
-+ const uint32_t epnum)
-+{
-+ /** @todo implement ISR */
-+ dwc_otg_core_if_t* core_if;
-+ doepmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NAK");
-+ core_if = GET_CORE_IF(pcd);
-+ intr_mask.b.nak = 1;
-+
-+ if(core_if->multiproc_int_enable) {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
-+ intr_mask.d32, 0);
-+ } else {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
-+ intr_mask.d32, 0);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handler for the OUT EP NYET interrupt.
-+ */
-+static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t *pcd,
-+ const uint32_t epnum)
-+{
-+ /** @todo implement ISR */
-+ dwc_otg_core_if_t* core_if;
-+ doepmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET");
-+ core_if = GET_CORE_IF(pcd);
-+ intr_mask.b.nyet = 1;
-+
-+ if(core_if->multiproc_int_enable) {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
-+ intr_mask.d32, 0);
-+ } else {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
-+ intr_mask.d32, 0);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that an IN EP has a pending Interrupt.
-+ * The sequence for handling the IN EP interrupt is shown below:
-+ * -# Read the Device All Endpoint Interrupt register
-+ * -# Repeat the following for each IN EP interrupt bit set (from
-+ * LSB to MSB).
-+ * -# Read the Device Endpoint Interrupt (DIEPINTn) register
-+ * -# If "Transfer Complete" call the request complete function
-+ * -# If "Endpoint Disabled" complete the EP disable procedure.
-+ * -# If "AHB Error Interrupt" log error
-+ * -# If "Time-out Handshake" log error
-+ * -# If "IN Token Received when TxFIFO Empty" write packet to Tx
-+ * FIFO.
-+ * -# If "IN Token EP Mismatch" (disable, this is handled by EP
-+ * Mismatch Interrupt)
-+ */
-+static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t *pcd)
-+{
-+#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \
-+do { \
-+ diepint_data_t diepint = {.d32=0}; \
-+ diepint.b.__intr = 1; \
-+ dwc_write_reg32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \
-+ diepint.d32); \
-+} while (0)
-+
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ diepint_data_t diepint = {.d32=0};
-+ dctl_data_t dctl = {.d32=0};
-+ depctl_data_t depctl = {.d32=0};
-+ uint32_t ep_intr;
-+ uint32_t epnum = 0;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+
-+
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
-+
-+ /* Read in the device interrupt bits */
-+ ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if);
-+
-+ /* Service the Device IN interrupts for each endpoint */
-+ while(ep_intr) {
-+ if (ep_intr&0x1) {
-+ uint32_t empty_msk;
-+ /* Get EP pointer */
-+ ep = get_in_ep(pcd, epnum);
-+ dwc_ep = &ep->dwc_ep;
-+
-+ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl);
-+ empty_msk = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
-+
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "IN EP INTERRUPT - %d\nepmty_msk - %8x diepctl - %8x\n",
-+ epnum,
-+ empty_msk,
-+ depctl.d32);
-+
-+ DWC_DEBUGPL(DBG_PCD,
-+ "EP%d-%s: type=%d, mps=%d\n",
-+ dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"),
-+ dwc_ep->type, dwc_ep->maxpacket);
-+
-+ diepint.d32 = dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep);
-+
-+ DWC_DEBUGPL(DBG_PCDV, "EP %d Interrupt Register - 0x%x\n", epnum, diepint.d32);
-+ /* Transfer complete */
-+ if (diepint.b.xfercompl) {
-+ /* Disable the NP Tx FIFO Empty
-+ * Interrrupt */
-+ if(core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
-+ }
-+ else {
-+ /* Disable the Tx FIFO Empty Interrupt for this EP */
-+ uint32_t fifoemptymsk = 0x1 << dwc_ep->num;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ fifoemptymsk, 0);
-+ }
-+ /* Clear the bit in DIEPINTn for this interrupt */
-+ CLEAR_IN_EP_INTR(core_if,epnum,xfercompl);
-+
-+ /* Complete the transfer */
-+ if (epnum == 0) {
-+ handle_ep0(pcd);
-+ }
-+#ifdef DWC_EN_ISOC
-+ else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ if(!ep->stopped)
-+ complete_iso_ep(ep);
-+ }
-+#endif //DWC_EN_ISOC
-+ else {
-+
-+ complete_ep(ep);
-+ }
-+ }
-+ /* Endpoint disable */
-+ if (diepint.b.epdisabled) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d IN disabled\n", epnum);
-+ handle_in_ep_disable_intr(pcd, epnum);
-+
-+ /* Clear the bit in DIEPINTn for this interrupt */
-+ CLEAR_IN_EP_INTR(core_if,epnum,epdisabled);
-+ }
-+ /* AHB Error */
-+ if (diepint.b.ahberr) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d IN AHB Error\n", epnum);
-+ /* Clear the bit in DIEPINTn for this interrupt */
-+ CLEAR_IN_EP_INTR(core_if,epnum,ahberr);
-+ }
-+ /* TimeOUT Handshake (non-ISOC IN EPs) */
-+ if (diepint.b.timeout) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d IN Time-out\n", epnum);
-+ handle_in_ep_timeout_intr(pcd, epnum);
-+
-+ CLEAR_IN_EP_INTR(core_if,epnum,timeout);
-+ }
-+ /** IN Token received with TxF Empty */
-+ if (diepint.b.intktxfemp) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN TxFifo Empty\n",
-+ epnum);
-+ if (!ep->stopped && epnum != 0) {
-+
-+ diepmsk_data_t diepmsk = { .d32 = 0};
-+ diepmsk.b.intktxfemp = 1;
-+
-+ if(core_if->multiproc_int_enable) {
-+ dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[epnum],
-+ diepmsk.d32, 0);
-+ } else {
-+ dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32, 0);
-+ }
-+ start_next_request(ep);
-+ }
-+ else if(core_if->dma_desc_enable && epnum == 0 &&
-+ pcd->ep0state == EP0_OUT_STATUS_PHASE) {
-+ // EP0 IN set STALL
-+ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl);
-+
-+ /* set the disable and stall bits */
-+ if (depctl.b.epena) {
-+ depctl.b.epdis = 1;
-+ }
-+ depctl.b.stall = 1;
-+ dwc_write_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32);
-+ }
-+ CLEAR_IN_EP_INTR(core_if,epnum,intktxfemp);
-+ }
-+ /** IN Token Received with EP mismatch */
-+ if (diepint.b.intknepmis) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN EP Mismatch\n", epnum);
-+ CLEAR_IN_EP_INTR(core_if,epnum,intknepmis);
-+ }
-+ /** IN Endpoint NAK Effective */
-+ if (diepint.b.inepnakeff) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d IN EP NAK Effective\n", epnum);
-+ /* Periodic EP */
-+ if (ep->disabling) {
-+ depctl.d32 = 0;
-+ depctl.b.snak = 1;
-+ depctl.b.epdis = 1;
-+ dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32);
-+ }
-+ CLEAR_IN_EP_INTR(core_if,epnum,inepnakeff);
-+
-+ }
-+
-+ /** IN EP Tx FIFO Empty Intr */
-+ if (diepint.b.emptyintr) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d Tx FIFO Empty Intr \n", epnum);
-+ write_empty_tx_fifo(pcd, epnum);
-+
-+ CLEAR_IN_EP_INTR(core_if,epnum,emptyintr);
-+
-+ }
-+
-+ /** IN EP BNA Intr */
-+ if (diepint.b.bna) {
-+ CLEAR_IN_EP_INTR(core_if,epnum,bna);
-+ if(core_if->dma_desc_enable) {
-+#ifdef DWC_EN_ISOC
-+ if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * This checking is performed to prevent first "false" BNA
-+ * handling occuring right after reconnect
-+ */
-+ if(dwc_ep->next_frame != 0xffffffff)
-+ dwc_otg_pcd_handle_iso_bna(ep);
-+ }
-+ else
-+#endif //DWC_EN_ISOC
-+ {
-+ dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl);
-+
-+ /* If Global Continue on BNA is disabled - disable EP */
-+ if(!dctl.b.gcontbna) {
-+ depctl.d32 = 0;
-+ depctl.b.snak = 1;
-+ depctl.b.epdis = 1;
-+ dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32);
-+ } else {
-+ start_next_request(ep);
-+ }
-+ }
-+ }
-+ }
-+ /* NAK Interrutp */
-+ if (diepint.b.nak) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d IN NAK Interrupt\n", epnum);
-+ handle_in_ep_nak_intr(pcd, epnum);
-+
-+ CLEAR_IN_EP_INTR(core_if,epnum,nak);
-+ }
-+ }
-+ epnum++;
-+ ep_intr >>=1;
-+ }
-+
-+ return 1;
-+#undef CLEAR_IN_EP_INTR
-+}
-+
-+/**
-+ * This interrupt indicates that an OUT EP has a pending Interrupt.
-+ * The sequence for handling the OUT EP interrupt is shown below:
-+ * -# Read the Device All Endpoint Interrupt register
-+ * -# Repeat the following for each OUT EP interrupt bit set (from
-+ * LSB to MSB).
-+ * -# Read the Device Endpoint Interrupt (DOEPINTn) register
-+ * -# If "Transfer Complete" call the request complete function
-+ * -# If "Endpoint Disabled" complete the EP disable procedure.
-+ * -# If "AHB Error Interrupt" log error
-+ * -# If "Setup Phase Done" process Setup Packet (See Standard USB
-+ * Command Processing)
-+ */
-+static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t *pcd)
-+{
-+#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \
-+do { \
-+ doepint_data_t doepint = {.d32=0}; \
-+ doepint.b.__intr = 1; \
-+ dwc_write_reg32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \
-+ doepint.d32); \
-+} while (0)
-+
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ uint32_t ep_intr;
-+ doepint_data_t doepint = {.d32=0};
-+ dctl_data_t dctl = {.d32=0};
-+ depctl_data_t doepctl = {.d32=0};
-+ uint32_t epnum = 0;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
-+
-+ /* Read in the device interrupt bits */
-+ ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if);
-+
-+ while(ep_intr) {
-+ if (ep_intr&0x1) {
-+ /* Get EP pointer */
-+ ep = get_out_ep(pcd, epnum);
-+ dwc_ep = &ep->dwc_ep;
-+
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "EP%d-%s: type=%d, mps=%d\n",
-+ dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"),
-+ dwc_ep->type, dwc_ep->maxpacket);
-+#endif
-+ doepint.d32 = dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep);
-+
-+ /* Transfer complete */
-+ if (doepint.b.xfercompl) {
-+
-+ if (epnum == 0) {
-+ /* Clear the bit in DOEPINTn for this interrupt */
-+ CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
-+ if(core_if->dma_desc_enable == 0 || pcd->ep0state != EP0_IDLE)
-+ handle_ep0(pcd);
-+#ifdef DWC_EN_ISOC
-+ } else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ if (doepint.b.pktdrpsts == 0) {
-+ /* Clear the bit in DOEPINTn for this interrupt */
-+ CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
-+ complete_iso_ep(ep);
-+ } else {
-+
-+ doepint_data_t doepint = {.d32=0};
-+ doepint.b.xfercompl = 1;
-+ doepint.b.pktdrpsts = 1;
-+ dwc_write_reg32(&core_if->dev_if->out_ep_regs[epnum]->doepint,
-+ doepint.d32);
-+ if(handle_iso_out_pkt_dropped(core_if,dwc_ep)) {
-+ complete_iso_ep(ep);
-+ }
-+ }
-+#endif //DWC_EN_ISOC
-+ } else {
-+ /* Clear the bit in DOEPINTn for this interrupt */
-+ CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
-+ complete_ep(ep);
-+ }
-+
-+ }
-+
-+ /* Endpoint disable */
-+ if (doepint.b.epdisabled) {
-+
-+ /* Clear the bit in DOEPINTn for this interrupt */
-+ CLEAR_OUT_EP_INTR(core_if,epnum,epdisabled);
-+ }
-+ /* AHB Error */
-+ if (doepint.b.ahberr) {
-+ DWC_DEBUGPL(DBG_PCD,"EP%d OUT AHB Error\n", epnum);
-+ DWC_DEBUGPL(DBG_PCD,"EP DMA REG %d \n", core_if->dev_if->out_ep_regs[epnum]->doepdma);
-+ CLEAR_OUT_EP_INTR(core_if,epnum,ahberr);
-+ }
-+ /* Setup Phase Done (contorl EPs) */
-+ if (doepint.b.setup) {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD,"EP%d SETUP Done\n",
-+ epnum);
-+#endif
-+ CLEAR_OUT_EP_INTR(core_if,epnum,setup);
-+
-+ handle_ep0(pcd);
-+ }
-+
-+ /** OUT EP BNA Intr */
-+ if (doepint.b.bna) {
-+ CLEAR_OUT_EP_INTR(core_if,epnum,bna);
-+ if(core_if->dma_desc_enable) {
-+#ifdef DWC_EN_ISOC
-+ if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * This checking is performed to prevent first "false" BNA
-+ * handling occuring right after reconnect
-+ */
-+ if(dwc_ep->next_frame != 0xffffffff)
-+ dwc_otg_pcd_handle_iso_bna(ep);
-+ }
-+ else
-+#endif //DWC_EN_ISOC
-+ {
-+ dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl);
-+
-+ /* If Global Continue on BNA is disabled - disable EP*/
-+ if(!dctl.b.gcontbna) {
-+ doepctl.d32 = 0;
-+ doepctl.b.snak = 1;
-+ doepctl.b.epdis = 1;
-+ dwc_modify_reg32(&dev_if->out_ep_regs[epnum]->doepctl, doepctl.d32, doepctl.d32);
-+ } else {
-+ start_next_request(ep);
-+ }
-+ }
-+ }
-+ }
-+ if (doepint.b.stsphsercvd) {
-+ CLEAR_OUT_EP_INTR(core_if,epnum,stsphsercvd);
-+ if(core_if->dma_desc_enable) {
-+ do_setup_in_status_phase(pcd);
-+ }
-+ }
-+ /* Babble Interrutp */
-+ if (doepint.b.babble) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d OUT Babble\n", epnum);
-+ handle_out_ep_babble_intr(pcd, epnum);
-+
-+ CLEAR_OUT_EP_INTR(core_if,epnum,babble);
-+ }
-+ /* NAK Interrutp */
-+ if (doepint.b.nak) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d OUT NAK\n", epnum);
-+ handle_out_ep_nak_intr(pcd, epnum);
-+
-+ CLEAR_OUT_EP_INTR(core_if,epnum,nak);
-+ }
-+ /* NYET Interrutp */
-+ if (doepint.b.nyet) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d OUT NYET\n", epnum);
-+ handle_out_ep_nyet_intr(pcd, epnum);
-+
-+ CLEAR_OUT_EP_INTR(core_if,epnum,nyet);
-+ }
-+ }
-+
-+ epnum++;
-+ ep_intr >>=1;
-+ }
-+
-+ return 1;
-+
-+#undef CLEAR_OUT_EP_INTR
-+}
-+
-+
-+/**
-+ * Incomplete ISO IN Transfer Interrupt.
-+ * This interrupt indicates one of the following conditions occurred
-+ * while transmitting an ISOC transaction.
-+ * - Corrupted IN Token for ISOC EP.
-+ * - Packet not complete in FIFO.
-+ * The follow actions will be taken:
-+ * -# Determine the EP
-+ * -# Set incomplete flag in dwc_ep structure
-+ * -# Disable EP; when "Endpoint Disabled" interrupt is received
-+ * Flush FIFO
-+ */
-+int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t *pcd)
-+{
-+ gintsts_data_t gintsts;
-+
-+
-+#ifdef DWC_EN_ISOC
-+ dwc_otg_dev_if_t *dev_if;
-+ deptsiz_data_t deptsiz = { .d32 = 0};
-+ depctl_data_t depctl = { .d32 = 0};
-+ dsts_data_t dsts = { .d32 = 0};
-+ dwc_ep_t *dwc_ep;
-+ int i;
-+
-+ dev_if = GET_CORE_IF(pcd)->dev_if;
-+
-+ for(i = 1; i <= dev_if->num_in_eps; ++i) {
-+ dwc_ep = &pcd->in_ep[i].dwc_ep;
-+ if(dwc_ep->active &&
-+ dwc_ep->type == USB_ENDPOINT_XFER_ISOC)
-+ {
-+ deptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->dieptsiz);
-+ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
-+
-+ if(depctl.b.epdis && deptsiz.d32) {
-+ set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep);
-+ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-+ dwc_ep->cur_pkt = 0;
-+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+
-+ if(dwc_ep->proc_buf_num) {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
-+ } else {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
-+ }
-+
-+ }
-+
-+ dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts);
-+ dwc_ep->next_frame = dsts.b.soffn;
-+
-+ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep);
-+ }
-+ }
-+ }
-+
-+#else
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
-+ "IN ISOC Incomplete");
-+
-+ intr_mask.b.incomplisoin = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+#endif //DWC_EN_ISOC
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.incomplisoin = 1;
-+ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Incomplete ISO OUT Transfer Interrupt.
-+ *
-+ * This interrupt indicates that the core has dropped an ISO OUT
-+ * packet. The following conditions can be the cause:
-+ * - FIFO Full, the entire packet would not fit in the FIFO.
-+ * - CRC Error
-+ * - Corrupted Token
-+ * The follow actions will be taken:
-+ * -# Determine the EP
-+ * -# Set incomplete flag in dwc_ep structure
-+ * -# Read any data from the FIFO
-+ * -# Disable EP. when "Endpoint Disabled" interrupt is received
-+ * re-enable EP.
-+ */
-+int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t *pcd)
-+{
-+ /* @todo implement ISR */
-+ gintsts_data_t gintsts;
-+
-+#ifdef DWC_EN_ISOC
-+ dwc_otg_dev_if_t *dev_if;
-+ deptsiz_data_t deptsiz = { .d32 = 0};
-+ depctl_data_t depctl = { .d32 = 0};
-+ dsts_data_t dsts = { .d32 = 0};
-+ dwc_ep_t *dwc_ep;
-+ int i;
-+
-+ dev_if = GET_CORE_IF(pcd)->dev_if;
-+
-+ for(i = 1; i <= dev_if->num_out_eps; ++i) {
-+ dwc_ep = &pcd->in_ep[i].dwc_ep;
-+ if(pcd->out_ep[i].dwc_ep.active &&
-+ pcd->out_ep[i].dwc_ep.type == USB_ENDPOINT_XFER_ISOC)
-+ {
-+ deptsiz.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doeptsiz);
-+ depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
-+
-+ if(depctl.b.epdis && deptsiz.d32) {
-+ set_current_pkt_info(GET_CORE_IF(pcd), &pcd->out_ep[i].dwc_ep);
-+ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-+ dwc_ep->cur_pkt = 0;
-+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+
-+ if(dwc_ep->proc_buf_num) {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
-+ } else {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
-+ }
-+
-+ }
-+
-+ dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts);
-+ dwc_ep->next_frame = dsts.b.soffn;
-+
-+ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep);
-+ }
-+ }
-+ }
-+#else
-+ /** @todo implement ISR */
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
-+ "OUT ISOC Incomplete");
-+
-+ intr_mask.b.incomplisoout = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+#endif // DWC_EN_ISOC
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.incomplisoout = 1;
-+ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This function handles the Global IN NAK Effective interrupt.
-+ *
-+ */
-+int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
-+ depctl_data_t diepctl = { .d32 = 0};
-+ depctl_data_t diepctl_rd = { .d32 = 0};
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ gintsts_data_t gintsts;
-+ int i;
-+
-+ DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n");
-+
-+ /* Disable all active IN EPs */
-+ diepctl.b.epdis = 1;
-+ diepctl.b.snak = 1;
-+
-+ for (i=0; i <= dev_if->num_in_eps; i++)
-+ {
-+ diepctl_rd.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
-+ if (diepctl_rd.b.epena) {
-+ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl,
-+ diepctl.d32);
-+ }
-+ }
-+ /* Disable the Global IN NAK Effective Interrupt */
-+ intr_mask.b.ginnakeff = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.ginnakeff = 1;
-+ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * OUT NAK Effective.
-+ *
-+ */
-+int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t *pcd)
-+{
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ gintsts_data_t gintsts;
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
-+ "Global IN NAK Effective\n");
-+ /* Disable the Global IN NAK Effective Interrupt */
-+ intr_mask.b.goutnakeff = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.goutnakeff = 1;
-+ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+
-+/**
-+ * PCD interrupt handler.
-+ *
-+ * The PCD handles the device interrupts. Many conditions can cause a
-+ * device interrupt. When an interrupt occurs, the device interrupt
-+ * service routine determines the cause of the interrupt and
-+ * dispatches handling to the appropriate function. These interrupt
-+ * handling functions are described below.
-+ *
-+ * All interrupt registers are processed from LSB to MSB.
-+ *
-+ */
-+int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+#ifdef VERBOSE
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+#endif
-+ gintsts_data_t gintr_status;
-+ int32_t retval = 0;
-+
-+
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x gintmsk=%08x\n",
-+ __func__,
-+ dwc_read_reg32(&global_regs->gintsts),
-+ dwc_read_reg32(&global_regs->gintmsk));
-+#endif
-+
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ SPIN_LOCK(&pcd->lock);
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x gintmsk=%08x\n",
-+ __func__,
-+ dwc_read_reg32(&global_regs->gintsts),
-+ dwc_read_reg32(&global_regs->gintmsk));
-+#endif
-+
-+ gintr_status.d32 = dwc_otg_read_core_intr(core_if);
-+
-+/*
-+ if (!gintr_status.d32) {
-+ SPIN_UNLOCK(&pcd->lock);
-+ return 0;
-+ }
-+*/
-+ DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n",
-+ __func__, gintr_status.d32);
-+
-+ if (gintr_status.b.sofintr) {
-+ retval |= dwc_otg_pcd_handle_sof_intr(pcd);
-+ }
-+ if (gintr_status.b.rxstsqlvl) {
-+ retval |= dwc_otg_pcd_handle_rx_status_q_level_intr(pcd);
-+ }
-+ if (gintr_status.b.nptxfempty) {
-+ retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd);
-+ }
-+ if (gintr_status.b.ginnakeff) {
-+ retval |= dwc_otg_pcd_handle_in_nak_effective(pcd);
-+ }
-+ if (gintr_status.b.goutnakeff) {
-+ retval |= dwc_otg_pcd_handle_out_nak_effective(pcd);
-+ }
-+ if (gintr_status.b.i2cintr) {
-+ retval |= dwc_otg_pcd_handle_i2c_intr(pcd);
-+ }
-+ if (gintr_status.b.erlysuspend) {
-+ retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd);
-+ }
-+ if (gintr_status.b.usbreset) {
-+ retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd);
-+ }
-+ if (gintr_status.b.enumdone) {
-+ retval |= dwc_otg_pcd_handle_enum_done_intr(pcd);
-+ }
-+ if (gintr_status.b.isooutdrop) {
-+ retval |= dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(pcd);
-+ }
-+ if (gintr_status.b.eopframe) {
-+ retval |= dwc_otg_pcd_handle_end_periodic_frame_intr(pcd);
-+ }
-+ if (gintr_status.b.epmismatch) {
-+ retval |= dwc_otg_pcd_handle_ep_mismatch_intr(core_if);
-+ }
-+ if (gintr_status.b.inepint) {
-+ if(!core_if->multiproc_int_enable) {
-+ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
-+ }
-+ }
-+ if (gintr_status.b.outepintr) {
-+ if(!core_if->multiproc_int_enable) {
-+ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
-+ }
-+ }
-+ if (gintr_status.b.incomplisoin) {
-+ retval |= dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd);
-+ }
-+ if (gintr_status.b.incomplisoout) {
-+ retval |= dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd);
-+ }
-+
-+ /* In MPI mode De vice Endpoints intterrupts are asserted
-+ * without setting outepintr and inepint bits set, so these
-+ * Interrupt handlers are called without checking these bit-fields
-+ */
-+ if(core_if->multiproc_int_enable) {
-+ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
-+ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
-+ }
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__,
-+ dwc_read_reg32(&global_regs->gintsts));
-+#endif
-+ SPIN_UNLOCK(&pcd->lock);
-+ }
-+
-+ S3C2410X_CLEAR_EINTPEND();
-+
-+ return retval;
-+}
-+
-+#endif /* DWC_HOST_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_plat.h
-@@ -0,0 +1,268 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/platform/dwc_otg_plat.h $
-+ * $Revision: #23 $
-+ * $Date: 2008/07/15 $
-+ * $Change: 1064915 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#if !defined(__DWC_OTG_PLAT_H__)
-+#define __DWC_OTG_PLAT_H__
-+
-+#include <linux/types.h>
-+#include <linux/slab.h>
-+#include <linux/list.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+
-+#define cns3xxx_ioremap(addr, size) ioremap(addr, size)
-+#define cns3xxx_iounmap(addr) iounmap(addr)
-+/* Changed all readl and writel to __raw_readl, __raw_writel */
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the Platform Specific constants, interfaces
-+ * (functions and macros) for Linux.
-+ *
-+ */
-+//#if !defined(__LINUX_ARM_ARCH__)
-+//#error "The contents of this file is Linux specific!!!"
-+//#endif
-+
-+/**
-+ * Reads the content of a register.
-+ *
-+ * @param reg address of register to read.
-+ * @return contents of the register.
-+ *
-+
-+ * Usage:<br>
-+ * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code>
-+ */
-+static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *reg)
-+{
-+ return __raw_readl(reg);
-+ // return readl(reg);
-+};
-+
-+/**
-+ * Writes a register with a 32 bit value.
-+ *
-+ * @param reg address of register to read.
-+ * @param value to write to _reg.
-+ *
-+ * Usage:<br>
-+ * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code>
-+ */
-+static __inline__ void dwc_write_reg32( volatile uint32_t *reg, const uint32_t value)
-+{
-+ // writel( value, reg );
-+ __raw_writel(value, reg);
-+
-+};
-+
-+/**
-+ * This function modifies bit values in a register. Using the
-+ * algorithm: (reg_contents & ~clear_mask) | set_mask.
-+ *
-+ * @param reg address of register to read.
-+ * @param clear_mask bit mask to be cleared.
-+ * @param set_mask bit mask to be set.
-+ *
-+ * Usage:<br>
-+ * <code> // Clear the SOF Interrupt Mask bit and <br>
-+ * // set the OTG Interrupt mask bit, leaving all others as they were.
-+ * dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code>
-+ */
-+static __inline__
-+ void dwc_modify_reg32( volatile uint32_t *reg, const uint32_t clear_mask, const uint32_t set_mask)
-+{
-+ // writel( (readl(reg) & ~clear_mask) | set_mask, reg );
-+ __raw_writel( (__raw_readl(reg) & ~clear_mask) | set_mask, reg );
-+};
-+
-+
-+/**
-+ * Wrapper for the OS micro-second delay function.
-+ * @param[in] usecs Microseconds of delay
-+ */
-+static __inline__ void UDELAY( const uint32_t usecs )
-+{
-+ udelay( usecs );
-+}
-+
-+/**
-+ * Wrapper for the OS milli-second delay function.
-+ * @param[in] msecs milliseconds of delay
-+ */
-+static __inline__ void MDELAY( const uint32_t msecs )
-+{
-+ mdelay( msecs );
-+}
-+
-+/**
-+ * Wrapper for the Linux spin_lock. On the ARM (Integrator)
-+ * spin_lock() is a nop.
-+ *
-+ * @param lock Pointer to the spinlock.
-+ */
-+static __inline__ void SPIN_LOCK( spinlock_t *lock )
-+{
-+ spin_lock(lock);
-+}
-+
-+/**
-+ * Wrapper for the Linux spin_unlock. On the ARM (Integrator)
-+ * spin_lock() is a nop.
-+ *
-+ * @param lock Pointer to the spinlock.
-+ */
-+static __inline__ void SPIN_UNLOCK( spinlock_t *lock )
-+{
-+ spin_unlock(lock);
-+}
-+
-+/**
-+ * Wrapper (macro) for the Linux spin_lock_irqsave. On the ARM
-+ * (Integrator) spin_lock() is a nop.
-+ *
-+ * @param l Pointer to the spinlock.
-+ * @param f unsigned long for irq flags storage.
-+ */
-+#define SPIN_LOCK_IRQSAVE( l, f ) spin_lock_irqsave(l,f);
-+
-+/**
-+ * Wrapper (macro) for the Linux spin_unlock_irqrestore. On the ARM
-+ * (Integrator) spin_lock() is a nop.
-+ *
-+ * @param l Pointer to the spinlock.
-+ * @param f unsigned long for irq flags storage.
-+ */
-+#define SPIN_UNLOCK_IRQRESTORE( l,f ) spin_unlock_irqrestore(l,f);
-+
-+/*
-+ * Debugging support vanishes in non-debug builds.
-+ */
-+
-+
-+/**
-+ * The Debug Level bit-mask variable.
-+ */
-+extern uint32_t g_dbg_lvl;
-+/**
-+ * Set the Debug Level variable.
-+ */
-+static inline uint32_t SET_DEBUG_LEVEL( const uint32_t new )
-+{
-+ uint32_t old = g_dbg_lvl;
-+ g_dbg_lvl = new;
-+ return old;
-+}
-+
-+/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
-+#define DBG_CIL (0x2)
-+/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
-+ * messages */
-+#define DBG_CILV (0x20)
-+/** When debug level has the DBG_PCD bit set, display PCD (Device) debug
-+ * messages */
-+#define DBG_PCD (0x4)
-+/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
-+ * messages */
-+#define DBG_PCDV (0x40)
-+/** When debug level has the DBG_HCD bit set, display Host debug messages */
-+#define DBG_HCD (0x8)
-+/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
-+ * messages */
-+#define DBG_HCDV (0x80)
-+/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
-+ * mode. */
-+#define DBG_HCD_URB (0x800)
-+
-+/** When debug level has any bit set, display debug messages */
-+#define DBG_ANY (0xFF)
-+
-+/** All debug messages off */
-+#define DBG_OFF 0
-+
-+/** Prefix string for DWC_DEBUG print macros. */
-+#define USB_DWC "DWC_otg: "
-+
-+/**
-+ * Print a debug message when the Global debug level variable contains
-+ * the bit defined in <code>lvl</code>.
-+ *
-+ * @param[in] lvl - Debug level, use one of the DBG_ constants above.
-+ * @param[in] x - like printf
-+ *
-+ * Example:<p>
-+ * <code>
-+ * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
-+ * </code>
-+ * <br>
-+ * results in:<br>
-+ * <code>
-+ * usb-DWC_otg: dwc_otg_cil_init(ca867000)
-+ * </code>
-+ */
-+#ifdef DEBUG
-+
-+# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0)
-+# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x )
-+
-+# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
-+
-+#else
-+
-+# define DWC_DEBUGPL(lvl, x...) do{}while(0)
-+# define DWC_DEBUGP(x...)
-+
-+# define CHK_DEBUG_LEVEL(level) (0)
-+
-+#endif /*DEBUG*/
-+
-+/**
-+ * Print an Error message.
-+ */
-+#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x )
-+/**
-+ * Print a Warning message.
-+ */
-+#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x )
-+/**
-+ * Print a notice (normal but significant message).
-+ */
-+#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x )
-+/**
-+ * Basic message printing.
-+ */
-+#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x )
-+
-+#endif
-+
---- /dev/null
-+++ b/drivers/usb/host/otg/dwc_otg_regs.h
-@@ -0,0 +1,2075 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $
-+ * $Revision: #72 $
-+ * $Date: 2008/09/19 $
-+ * $Change: 1099526 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#ifndef __DWC_OTG_REGS_H__
-+#define __DWC_OTG_REGS_H__
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the data structures for accessing the DWC_otg core registers.
-+ *
-+ * The application interfaces with the HS OTG core by reading from and
-+ * writing to the Control and Status Register (CSR) space through the
-+ * AHB Slave interface. These registers are 32 bits wide, and the
-+ * addresses are 32-bit-block aligned.
-+ * CSRs are classified as follows:
-+ * - Core Global Registers
-+ * - Device Mode Registers
-+ * - Device Global Registers
-+ * - Device Endpoint Specific Registers
-+ * - Host Mode Registers
-+ * - Host Global Registers
-+ * - Host Port CSRs
-+ * - Host Channel Specific Registers
-+ *
-+ * Only the Core Global registers can be accessed in both Device and
-+ * Host modes. When the HS OTG core is operating in one mode, either
-+ * Device or Host, the application must not access registers from the
-+ * other mode. When the core switches from one mode to another, the
-+ * registers in the new mode of operation must be reprogrammed as they
-+ * would be after a power-on reset.
-+ */
-+
-+/** Maximum number of Periodic FIFOs */
-+#define MAX_PERIO_FIFOS 15
-+/** Maximum number of Transmit FIFOs */
-+#define MAX_TX_FIFOS 15
-+
-+/** Maximum number of Endpoints/HostChannels */
-+#define MAX_EPS_CHANNELS 16
-+
-+/****************************************************************************/
-+/** DWC_otg Core registers .
-+ * The dwc_otg_core_global_regs structure defines the size
-+ * and relative field offsets for the Core Global registers.
-+ */
-+typedef struct dwc_otg_core_global_regs
-+{
-+ /** OTG Control and Status Register. <i>Offset: 000h</i> */
-+ volatile uint32_t gotgctl;
-+ /** OTG Interrupt Register. <i>Offset: 004h</i> */
-+ volatile uint32_t gotgint;
-+ /**Core AHB Configuration Register. <i>Offset: 008h</i> */
-+ volatile uint32_t gahbcfg;
-+
-+#define DWC_GLBINTRMASK 0x0001
-+#define DWC_DMAENABLE 0x0020
-+#define DWC_NPTXEMPTYLVL_EMPTY 0x0080
-+#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000
-+#define DWC_PTXEMPTYLVL_EMPTY 0x0100
-+#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000
-+
-+ /**Core USB Configuration Register. <i>Offset: 00Ch</i> */
-+ volatile uint32_t gusbcfg;
-+ /**Core Reset Register. <i>Offset: 010h</i> */
-+ volatile uint32_t grstctl;
-+ /**Core Interrupt Register. <i>Offset: 014h</i> */
-+ volatile uint32_t gintsts;
-+ /**Core Interrupt Mask Register. <i>Offset: 018h</i> */
-+ volatile uint32_t gintmsk;
-+ /**Receive Status Queue Read Register (Read Only). <i>Offset: 01Ch</i> */
-+ volatile uint32_t grxstsr;
-+ /**Receive Status Queue Read & POP Register (Read Only). <i>Offset: 020h</i>*/
-+ volatile uint32_t grxstsp;
-+ /**Receive FIFO Size Register. <i>Offset: 024h</i> */
-+ volatile uint32_t grxfsiz;
-+ /**Non Periodic Transmit FIFO Size Register. <i>Offset: 028h</i> */
-+ volatile uint32_t gnptxfsiz;
-+ /**Non Periodic Transmit FIFO/Queue Status Register (Read
-+ * Only). <i>Offset: 02Ch</i> */
-+ volatile uint32_t gnptxsts;
-+ /**I2C Access Register. <i>Offset: 030h</i> */
-+ volatile uint32_t gi2cctl;
-+ /**PHY Vendor Control Register. <i>Offset: 034h</i> */
-+ volatile uint32_t gpvndctl;
-+ /**General Purpose Input/Output Register. <i>Offset: 038h</i> */
-+ volatile uint32_t ggpio;
-+ /**User ID Register. <i>Offset: 03Ch</i> */
-+ volatile uint32_t guid;
-+ /**Synopsys ID Register (Read Only). <i>Offset: 040h</i> */
-+ volatile uint32_t gsnpsid;
-+ /**User HW Config1 Register (Read Only). <i>Offset: 044h</i> */
-+ volatile uint32_t ghwcfg1;
-+ /**User HW Config2 Register (Read Only). <i>Offset: 048h</i> */
-+ volatile uint32_t ghwcfg2;
-+#define DWC_SLAVE_ONLY_ARCH 0
-+#define DWC_EXT_DMA_ARCH 1
-+#define DWC_INT_DMA_ARCH 2
-+
-+#define DWC_MODE_HNP_SRP_CAPABLE 0
-+#define DWC_MODE_SRP_ONLY_CAPABLE 1
-+#define DWC_MODE_NO_HNP_SRP_CAPABLE 2
-+#define DWC_MODE_SRP_CAPABLE_DEVICE 3
-+#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4
-+#define DWC_MODE_SRP_CAPABLE_HOST 5
-+#define DWC_MODE_NO_SRP_CAPABLE_HOST 6
-+
-+ /**User HW Config3 Register (Read Only). <i>Offset: 04Ch</i> */
-+ volatile uint32_t ghwcfg3;
-+ /**User HW Config4 Register (Read Only). <i>Offset: 050h</i>*/
-+ volatile uint32_t ghwcfg4;
-+ /** Reserved <i>Offset: 054h-0FFh</i> */
-+ volatile uint32_t reserved[43];
-+ /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
-+ volatile uint32_t hptxfsiz;
-+ /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
-+ otherwise Device Transmit FIFO#n Register.
-+ * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
-+ volatile uint32_t dptxfsiz_dieptxf[15];
-+} dwc_otg_core_global_regs_t;
-+
-+/**
-+ * This union represents the bit fields of the Core OTG Control
-+ * and Status Register (GOTGCTL). Set the bits using the bit
-+ * fields then write the <i>d32</i> value to the register.
-+ */
-+typedef union gotgctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned sesreqscs : 1;
-+ unsigned sesreq : 1;
-+ unsigned reserved2_7 : 6;
-+ unsigned hstnegscs : 1;
-+ unsigned hnpreq : 1;
-+ unsigned hstsethnpen : 1;
-+ unsigned devhnpen : 1;
-+ unsigned reserved12_15 : 4;
-+ unsigned conidsts : 1;
-+ unsigned reserved17 : 1;
-+ unsigned asesvld : 1;
-+ unsigned bsesvld : 1;
-+ unsigned currmod : 1;
-+ unsigned reserved21_31 : 11;
-+ } b;
-+} gotgctl_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core OTG Interrupt Register
-+ * (GOTGINT). Set/clear the bits using the bit fields then write the <i>d32</i>
-+ * value to the register.
-+ */
-+typedef union gotgint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Current Mode */
-+ unsigned reserved0_1 : 2;
-+
-+ /** Session End Detected */
-+ unsigned sesenddet : 1;
-+
-+ unsigned reserved3_7 : 5;
-+
-+ /** Session Request Success Status Change */
-+ unsigned sesreqsucstschng : 1;
-+ /** Host Negotiation Success Status Change */
-+ unsigned hstnegsucstschng : 1;
-+
-+ unsigned reserver10_16 : 7;
-+
-+ /** Host Negotiation Detected */
-+ unsigned hstnegdet : 1;
-+ /** A-Device Timeout Change */
-+ unsigned adevtoutchng : 1;
-+ /** Debounce Done */
-+ unsigned debdone : 1;
-+
-+ unsigned reserved31_20 : 12;
-+
-+ } b;
-+} gotgint_data_t;
-+
-+
-+/**
-+ * This union represents the bit fields of the Core AHB Configuration
-+ * Register (GAHBCFG). Set/clear the bits using the bit fields then
-+ * write the <i>d32</i> value to the register.
-+ */
-+typedef union gahbcfg_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned glblintrmsk : 1;
-+#define DWC_GAHBCFG_GLBINT_ENABLE 1
-+
-+ unsigned hburstlen : 4;
-+#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7
-+
-+ unsigned dmaenable : 1;
-+#define DWC_GAHBCFG_DMAENABLE 1
-+ unsigned reserved : 1;
-+ unsigned nptxfemplvl_txfemplvl : 1;
-+ unsigned ptxfemplvl : 1;
-+#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1
-+#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0
-+ unsigned reserved9_31 : 23;
-+ } b;
-+} gahbcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core USB Configuration
-+ * Register (GUSBCFG). Set the bits using the bit fields then write
-+ * the <i>d32</i> value to the register.
-+ */
-+typedef union gusbcfg_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned toutcal : 3;
-+ unsigned phyif : 1;
-+ unsigned ulpi_utmi_sel : 1;
-+ unsigned fsintf : 1;
-+ unsigned physel : 1;
-+ unsigned ddrsel : 1;
-+ unsigned srpcap : 1;
-+ unsigned hnpcap : 1;
-+ unsigned usbtrdtim : 4;
-+ unsigned nptxfrwnden : 1;
-+ unsigned phylpwrclksel : 1;
-+ unsigned otgutmifssel : 1;
-+ unsigned ulpi_fsls : 1;
-+ unsigned ulpi_auto_res : 1;
-+ unsigned ulpi_clk_sus_m : 1;
-+ unsigned ulpi_ext_vbus_drv : 1;
-+ unsigned ulpi_int_vbus_indicator : 1;
-+ unsigned term_sel_dl_pulse : 1;
-+ unsigned reserved23_27 : 5;
-+ unsigned tx_end_delay : 1;
-+ unsigned reserved29_31 : 3;
-+ } b;
-+} gusbcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core Reset Register
-+ * (GRSTCTL). Set/clear the bits using the bit fields then write the
-+ * <i>d32</i> value to the register.
-+ */
-+typedef union grstctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Core Soft Reset (CSftRst) (Device and Host)
-+ *
-+ * The application can flush the control logic in the
-+ * entire core using this bit. This bit resets the
-+ * pipelines in the AHB Clock domain as well as the
-+ * PHY Clock domain.
-+ *
-+ * The state machines are reset to an IDLE state, the
-+ * control bits in the CSRs are cleared, all the
-+ * transmit FIFOs and the receive FIFO are flushed.
-+ *
-+ * The status mask bits that control the generation of
-+ * the interrupt, are cleared, to clear the
-+ * interrupt. The interrupt status bits are not
-+ * cleared, so the application can get the status of
-+ * any events that occurred in the core after it has
-+ * set this bit.
-+ *
-+ * Any transactions on the AHB are terminated as soon
-+ * as possible following the protocol. Any
-+ * transactions on the USB are terminated immediately.
-+ *
-+ * The configuration settings in the CSRs are
-+ * unchanged, so the software doesn't have to
-+ * reprogram these registers (Device
-+ * Configuration/Host Configuration/Core System
-+ * Configuration/Core PHY Configuration).
-+ *
-+ * The application can write to this bit, any time it
-+ * wants to reset the core. This is a self clearing
-+ * bit and the core clears this bit after all the
-+ * necessary logic is reset in the core, which may
-+ * take several clocks, depending on the current state
-+ * of the core.
-+ */
-+ unsigned csftrst : 1;
-+ /** Hclk Soft Reset
-+ *
-+ * The application uses this bit to reset the control logic in
-+ * the AHB clock domain. Only AHB clock domain pipelines are
-+ * reset.
-+ */
-+ unsigned hsftrst : 1;
-+ /** Host Frame Counter Reset (Host Only)<br>
-+ *
-+ * The application can reset the (micro)frame number
-+ * counter inside the core, using this bit. When the
-+ * (micro)frame counter is reset, the subsequent SOF
-+ * sent out by the core, will have a (micro)frame
-+ * number of 0.
-+ */
-+ unsigned hstfrm : 1;
-+ /** In Token Sequence Learning Queue Flush
-+ * (INTknQFlsh) (Device Only)
-+ */
-+ unsigned intknqflsh : 1;
-+ /** RxFIFO Flush (RxFFlsh) (Device and Host)
-+ *
-+ * The application can flush the entire Receive FIFO
-+ * using this bit. <p>The application must first
-+ * ensure that the core is not in the middle of a
-+ * transaction. <p>The application should write into
-+ * this bit, only after making sure that neither the
-+ * DMA engine is reading from the RxFIFO nor the MAC
-+ * is writing the data in to the FIFO. <p>The
-+ * application should wait until the bit is cleared
-+ * before performing any other operations. This bit
-+ * will takes 8 clocks (slowest of PHY or AHB clock)
-+ * to clear.
-+ */
-+ unsigned rxfflsh : 1;
-+ /** TxFIFO Flush (TxFFlsh) (Device and Host).
-+ *
-+ * This bit is used to selectively flush a single or
-+ * all transmit FIFOs. The application must first
-+ * ensure that the core is not in the middle of a
-+ * transaction. <p>The application should write into
-+ * this bit, only after making sure that neither the
-+ * DMA engine is writing into the TxFIFO nor the MAC
-+ * is reading the data out of the FIFO. <p>The
-+ * application should wait until the core clears this
-+ * bit, before performing any operations. This bit
-+ * will takes 8 clocks (slowest of PHY or AHB clock)
-+ * to clear.
-+ */
-+ unsigned txfflsh : 1;
-+
-+ /** TxFIFO Number (TxFNum) (Device and Host).
-+ *
-+ * This is the FIFO number which needs to be flushed,
-+ * using the TxFIFO Flush bit. This field should not
-+ * be changed until the TxFIFO Flush bit is cleared by
-+ * the core.
-+ * - 0x0 : Non Periodic TxFIFO Flush
-+ * - 0x1 : Periodic TxFIFO #1 Flush in device mode
-+ * or Periodic TxFIFO in host mode
-+ * - 0x2 : Periodic TxFIFO #2 Flush in device mode.
-+ * - ...
-+ * - 0xF : Periodic TxFIFO #15 Flush in device mode
-+ * - 0x10: Flush all the Transmit NonPeriodic and
-+ * Transmit Periodic FIFOs in the core
-+ */
-+ unsigned txfnum : 5;
-+ /** Reserved */
-+ unsigned reserved11_29 : 19;
-+ /** DMA Request Signal. Indicated DMA request is in
-+ * probress. Used for debug purpose. */
-+ unsigned dmareq : 1;
-+ /** AHB Master Idle. Indicates the AHB Master State
-+ * Machine is in IDLE condition. */
-+ unsigned ahbidle : 1;
-+ } b;
-+} grstctl_t;
-+
-+
-+/**
-+ * This union represents the bit fields of the Core Interrupt Mask
-+ * Register (GINTMSK). Set/clear the bits using the bit fields then
-+ * write the <i>d32</i> value to the register.
-+ */
-+typedef union gintmsk_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned reserved0 : 1;
-+ unsigned modemismatch : 1;
-+ unsigned otgintr : 1;
-+ unsigned sofintr : 1;
-+ unsigned rxstsqlvl : 1;
-+ unsigned nptxfempty : 1;
-+ unsigned ginnakeff : 1;
-+ unsigned goutnakeff : 1;
-+ unsigned reserved8 : 1;
-+ unsigned i2cintr : 1;
-+ unsigned erlysuspend : 1;
-+ unsigned usbsuspend : 1;
-+ unsigned usbreset : 1;
-+ unsigned enumdone : 1;
-+ unsigned isooutdrop : 1;
-+ unsigned eopframe : 1;
-+ unsigned reserved16 : 1;
-+ unsigned epmismatch : 1;
-+ unsigned inepintr : 1;
-+ unsigned outepintr : 1;
-+ unsigned incomplisoin : 1;
-+ unsigned incomplisoout : 1;
-+ unsigned reserved22_23 : 2;
-+ unsigned portintr : 1;
-+ unsigned hcintr : 1;
-+ unsigned ptxfempty : 1;
-+ unsigned reserved27 : 1;
-+ unsigned conidstschng : 1;
-+ unsigned disconnect : 1;
-+ unsigned sessreqintr : 1;
-+ unsigned wkupintr : 1;
-+ } b;
-+} gintmsk_data_t;
-+/**
-+ * This union represents the bit fields of the Core Interrupt Register
-+ * (GINTSTS). Set/clear the bits using the bit fields then write the
-+ * <i>d32</i> value to the register.
-+ */
-+typedef union gintsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+#define DWC_SOF_INTR_MASK 0x0008
-+ /** register bits */
-+ struct
-+ {
-+#define DWC_HOST_MODE 1
-+ unsigned curmode : 1;
-+ unsigned modemismatch : 1;
-+ unsigned otgintr : 1;
-+ unsigned sofintr : 1;
-+ unsigned rxstsqlvl : 1;
-+ unsigned nptxfempty : 1;
-+ unsigned ginnakeff : 1;
-+ unsigned goutnakeff : 1;
-+ unsigned reserved8 : 1;
-+ unsigned i2cintr : 1;
-+ unsigned erlysuspend : 1;
-+ unsigned usbsuspend : 1;
-+ unsigned usbreset : 1;
-+ unsigned enumdone : 1;
-+ unsigned isooutdrop : 1;
-+ unsigned eopframe : 1;
-+ unsigned intokenrx : 1;
-+ unsigned epmismatch : 1;
-+ unsigned inepint: 1;
-+ unsigned outepintr : 1;
-+ unsigned incomplisoin : 1;
-+ unsigned incomplisoout : 1;
-+ unsigned reserved22_23 : 2;
-+ unsigned portintr : 1;
-+ unsigned hcintr : 1;
-+ unsigned ptxfempty : 1;
-+ unsigned reserved27 : 1;
-+ unsigned conidstschng : 1;
-+ unsigned disconnect : 1;
-+ unsigned sessreqintr : 1;
-+ unsigned wkupintr : 1;
-+ } b;
-+} gintsts_data_t;
-+
-+
-+/**
-+ * This union represents the bit fields in the Device Receive Status Read and
-+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
-+ * element then read out the bits using the <i>b</i>it elements.
-+ */
-+typedef union device_grxsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned epnum : 4;
-+ unsigned bcnt : 11;
-+ unsigned dpid : 2;
-+
-+#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet
-+#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete
-+
-+#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK
-+#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete
-+#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet
-+ unsigned pktsts : 4;
-+ unsigned fn : 4;
-+ unsigned reserved : 7;
-+ } b;
-+} device_grxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Receive Status Read and
-+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
-+ * element then read out the bits using the <i>b</i>it elements.
-+ */
-+typedef union host_grxsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned chnum : 4;
-+ unsigned bcnt : 11;
-+ unsigned dpid : 2;
-+
-+ unsigned pktsts : 4;
-+#define DWC_GRXSTS_PKTSTS_IN 0x2
-+#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3
-+#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
-+#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7
-+
-+ unsigned reserved : 11;
-+ } b;
-+} host_grxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
-+ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element then
-+ * read out the bits using the <i>b</i>it elements.
-+ */
-+typedef union fifosize_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned startaddr : 16;
-+ unsigned depth : 16;
-+ } b;
-+} fifosize_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Non-Periodic Transmit
-+ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
-+ * <i>d32</i> element then read out the bits using the <i>b</i>it
-+ * elements.
-+ */
-+typedef union gnptxsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned nptxfspcavail : 16;
-+ unsigned nptxqspcavail : 8;
-+ /** Top of the Non-Periodic Transmit Request Queue
-+ * - bit 24 - Terminate (Last entry for the selected
-+ * channel/EP)
-+ * - bits 26:25 - Token Type
-+ * - 2'b00 - IN/OUT
-+ * - 2'b01 - Zero Length OUT
-+ * - 2'b10 - PING/Complete Split
-+ * - 2'b11 - Channel Halt
-+ * - bits 30:27 - Channel/EP Number
-+ */
-+ unsigned nptxqtop_terminate : 1;
-+ unsigned nptxqtop_token : 2;
-+ unsigned nptxqtop_chnep : 4;
-+ unsigned reserved : 1;
-+ } b;
-+} gnptxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Transmit
-+ * FIFO Status Register (DTXFSTS). Read the register into the
-+ * <i>d32</i> element then read out the bits using the <i>b</i>it
-+ * elements.
-+ */
-+typedef union dtxfsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned txfspcavail : 16;
-+ unsigned reserved : 16;
-+ } b;
-+} dtxfsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the I2C Control Register
-+ * (I2CCTL). Read the register into the <i>d32</i> element then read out the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union gi2cctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned rwdata : 8;
-+ unsigned regaddr : 8;
-+ unsigned addr : 7;
-+ unsigned i2cen : 1;
-+ unsigned ack : 1;
-+ unsigned i2csuspctl : 1;
-+ unsigned i2cdevaddr : 2;
-+ unsigned reserved : 2;
-+ unsigned rw : 1;
-+ unsigned bsydne : 1;
-+ } b;
-+} gi2cctl_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config1
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg1_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned ep_dir0 : 2;
-+ unsigned ep_dir1 : 2;
-+ unsigned ep_dir2 : 2;
-+ unsigned ep_dir3 : 2;
-+ unsigned ep_dir4 : 2;
-+ unsigned ep_dir5 : 2;
-+ unsigned ep_dir6 : 2;
-+ unsigned ep_dir7 : 2;
-+ unsigned ep_dir8 : 2;
-+ unsigned ep_dir9 : 2;
-+ unsigned ep_dir10 : 2;
-+ unsigned ep_dir11 : 2;
-+ unsigned ep_dir12 : 2;
-+ unsigned ep_dir13 : 2;
-+ unsigned ep_dir14 : 2;
-+ unsigned ep_dir15 : 2;
-+ } b;
-+} hwcfg1_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config2
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg2_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /* GHWCFG2 */
-+ unsigned op_mode : 3;
-+#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
-+#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
-+#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
-+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
-+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
-+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
-+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
-+
-+ unsigned architecture : 2;
-+ unsigned point2point : 1;
-+ unsigned hs_phy_type : 2;
-+#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
-+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
-+#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
-+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
-+
-+ unsigned fs_phy_type : 2;
-+ unsigned num_dev_ep : 4;
-+ unsigned num_host_chan : 4;
-+ unsigned perio_ep_supported : 1;
-+ unsigned dynamic_fifo : 1;
-+ unsigned multi_proc_int : 1;
-+ unsigned reserved21 : 1;
-+ unsigned nonperio_tx_q_depth : 2;
-+ unsigned host_perio_tx_q_depth : 2;
-+ unsigned dev_token_q_depth : 5;
-+ unsigned reserved31 : 1;
-+ } b;
-+} hwcfg2_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config3
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg3_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /* GHWCFG3 */
-+ unsigned xfer_size_cntr_width : 4;
-+ unsigned packet_size_cntr_width : 3;
-+ unsigned otg_func : 1;
-+ unsigned i2c : 1;
-+ unsigned vendor_ctrl_if : 1;
-+ unsigned optional_features : 1;
-+ unsigned synch_reset_type : 1;
-+ unsigned ahb_phy_clock_synch : 1;
-+ unsigned reserved15_13 : 3;
-+ unsigned dfifo_depth : 16;
-+ } b;
-+} hwcfg3_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config4
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg4_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned num_dev_perio_in_ep : 4;
-+ unsigned power_optimiz : 1;
-+ unsigned min_ahb_freq : 9;
-+ unsigned utmi_phy_data_width : 2;
-+ unsigned num_dev_mode_ctrl_ep : 4;
-+ unsigned iddig_filt_en : 1;
-+ unsigned vbus_valid_filt_en : 1;
-+ unsigned a_valid_filt_en : 1;
-+ unsigned b_valid_filt_en : 1;
-+ unsigned session_end_filt_en : 1;
-+ unsigned ded_fifo_en : 1;
-+ unsigned num_in_eps : 4;
-+ unsigned desc_dma : 1;
-+ unsigned desc_dma_dyn : 1;
-+ } b;
-+} hwcfg4_data_t;
-+
-+////////////////////////////////////////////
-+// Device Registers
-+/**
-+ * Device Global Registers. <i>Offsets 800h-BFFh</i>
-+ *
-+ * The following structures define the size and relative field offsets
-+ * for the Device Mode Registers.
-+ *
-+ * <i>These registers are visible only in Device mode and must not be
-+ * accessed in Host mode, as the results are unknown.</i>
-+ */
-+typedef struct dwc_otg_dev_global_regs
-+{
-+ /** Device Configuration Register. <i>Offset 800h</i> */
-+ volatile uint32_t dcfg;
-+ /** Device Control Register. <i>Offset: 804h</i> */
-+ volatile uint32_t dctl;
-+ /** Device Status Register (Read Only). <i>Offset: 808h</i> */
-+ volatile uint32_t dsts;
-+ /** Reserved. <i>Offset: 80Ch</i> */
-+ uint32_t unused;
-+ /** Device IN Endpoint Common Interrupt Mask
-+ * Register. <i>Offset: 810h</i> */
-+ volatile uint32_t diepmsk;
-+ /** Device OUT Endpoint Common Interrupt Mask
-+ * Register. <i>Offset: 814h</i> */
-+ volatile uint32_t doepmsk;
-+ /** Device All Endpoints Interrupt Register. <i>Offset: 818h</i> */
-+ volatile uint32_t daint;
-+ /** Device All Endpoints Interrupt Mask Register. <i>Offset:
-+ * 81Ch</i> */
-+ volatile uint32_t daintmsk;
-+ /** Device IN Token Queue Read Register-1 (Read Only).
-+ * <i>Offset: 820h</i> */
-+ volatile uint32_t dtknqr1;
-+ /** Device IN Token Queue Read Register-2 (Read Only).
-+ * <i>Offset: 824h</i> */
-+ volatile uint32_t dtknqr2;
-+ /** Device VBUS discharge Register. <i>Offset: 828h</i> */
-+ volatile uint32_t dvbusdis;
-+ /** Device VBUS Pulse Register. <i>Offset: 82Ch</i> */
-+ volatile uint32_t dvbuspulse;
-+ /** Device IN Token Queue Read Register-3 (Read Only). /
-+ * Device Thresholding control register (Read/Write)
-+ * <i>Offset: 830h</i> */
-+ volatile uint32_t dtknqr3_dthrctl;
-+ /** Device IN Token Queue Read Register-4 (Read Only). /
-+ * Device IN EPs empty Inr. Mask Register (Read/Write)
-+ * <i>Offset: 834h</i> */
-+ volatile uint32_t dtknqr4_fifoemptymsk;
-+ /** Device Each Endpoint Interrupt Register (Read Only). /
-+ * <i>Offset: 838h</i> */
-+ volatile uint32_t deachint;
-+ /** Device Each Endpoint Interrupt mask Register (Read/Write). /
-+ * <i>Offset: 83Ch</i> */
-+ volatile uint32_t deachintmsk;
-+ /** Device Each In Endpoint Interrupt mask Register (Read/Write). /
-+ * <i>Offset: 840h</i> */
-+ volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS];
-+ /** Device Each Out Endpoint Interrupt mask Register (Read/Write). /
-+ * <i>Offset: 880h</i> */
-+ volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS];
-+} dwc_otg_device_global_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Device Configuration
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements. Write the
-+ * <i>d32</i> member to the dcfg register.
-+ */
-+typedef union dcfg_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Device Speed */
-+ unsigned devspd : 2;
-+ /** Non Zero Length Status OUT Handshake */
-+ unsigned nzstsouthshk : 1;
-+#define DWC_DCFG_SEND_STALL 1
-+
-+ unsigned reserved3 : 1;
-+ /** Device Addresses */
-+ unsigned devaddr : 7;
-+ /** Periodic Frame Interval */
-+ unsigned perfrint : 2;
-+#define DWC_DCFG_FRAME_INTERVAL_80 0
-+#define DWC_DCFG_FRAME_INTERVAL_85 1
-+#define DWC_DCFG_FRAME_INTERVAL_90 2
-+#define DWC_DCFG_FRAME_INTERVAL_95 3
-+
-+ unsigned reserved13_17 : 5;
-+ /** In Endpoint Mis-match count */
-+ unsigned epmscnt : 5;
-+ /** Enable Descriptor DMA in Device mode */
-+ unsigned descdma : 1;
-+ } b;
-+} dcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device Control
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union dctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Remote Wakeup */
-+ unsigned rmtwkupsig : 1;
-+ /** Soft Disconnect */
-+ unsigned sftdiscon : 1;
-+ /** Global Non-Periodic IN NAK Status */
-+ unsigned gnpinnaksts : 1;
-+ /** Global OUT NAK Status */
-+ unsigned goutnaksts : 1;
-+ /** Test Control */
-+ unsigned tstctl : 3;
-+ /** Set Global Non-Periodic IN NAK */
-+ unsigned sgnpinnak : 1;
-+ /** Clear Global Non-Periodic IN NAK */
-+ unsigned cgnpinnak : 1;
-+ /** Set Global OUT NAK */
-+ unsigned sgoutnak : 1;
-+ /** Clear Global OUT NAK */
-+ unsigned cgoutnak : 1;
-+
-+ /** Power-On Programming Done */
-+ unsigned pwronprgdone : 1;
-+ /** Global Continue on BNA */
-+ unsigned gcontbna : 1;
-+ /** Global Multi Count */
-+ unsigned gmc : 2;
-+ /** Ignore Frame Number for ISOC EPs */
-+ unsigned ifrmnum : 1;
-+ /** NAK on Babble */
-+ unsigned nakonbble : 1;
-+
-+ unsigned reserved16_31 : 16;
-+ } b;
-+} dctl_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device Status
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union dsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Suspend Status */
-+ unsigned suspsts : 1;
-+ /** Enumerated Speed */
-+ unsigned enumspd : 2;
-+#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
-+#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
-+#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2
-+#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3
-+ /** Erratic Error */
-+ unsigned errticerr : 1;
-+ unsigned reserved4_7: 4;
-+ /** Frame or Microframe Number of the received SOF */
-+ unsigned soffn : 14;
-+ unsigned reserved22_31 : 10;
-+ } b;
-+} dsts_data_t;
-+
-+
-+/**
-+ * This union represents the bit fields in the Device IN EP Interrupt
-+ * Register and the Device IN EP Common Mask Register.
-+ *
-+ * - Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union diepint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Transfer complete mask */
-+ unsigned xfercompl : 1;
-+ /** Endpoint disable mask */
-+ unsigned epdisabled : 1;
-+ /** AHB Error mask */
-+ unsigned ahberr : 1;
-+ /** TimeOUT Handshake mask (non-ISOC EPs) */
-+ unsigned timeout : 1;
-+ /** IN Token received with TxF Empty mask */
-+ unsigned intktxfemp : 1;
-+ /** IN Token Received with EP mismatch mask */
-+ unsigned intknepmis : 1;
-+ /** IN Endpoint HAK Effective mask */
-+ unsigned inepnakeff : 1;
-+ /** IN Endpoint HAK Effective mask */
-+ unsigned emptyintr : 1;
-+
-+ unsigned txfifoundrn : 1;
-+
-+ /** BNA Interrupt mask */
-+ unsigned bna : 1;
-+
-+ unsigned reserved10_12 : 3;
-+ /** BNA Interrupt mask */
-+ unsigned nak : 1;
-+
-+ unsigned reserved14_31 : 18;
-+ } b;
-+} diepint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device IN EP
-+ * Common/Dedicated Interrupt Mask Register.
-+ */
-+typedef union diepint_data diepmsk_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device OUT EP Interrupt
-+ * Registerand Device OUT EP Common Interrupt Mask Register.
-+ *
-+ * - Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union doepint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Transfer complete */
-+ unsigned xfercompl : 1;
-+ /** Endpoint disable */
-+ unsigned epdisabled : 1;
-+ /** AHB Error */
-+ unsigned ahberr : 1;
-+ /** Setup Phase Done (contorl EPs) */
-+ unsigned setup : 1;
-+ /** OUT Token Received when Endpoint Disabled */
-+ unsigned outtknepdis : 1;
-+
-+ unsigned stsphsercvd : 1;
-+ /** Back-to-Back SETUP Packets Received */
-+ unsigned back2backsetup : 1;
-+
-+ unsigned reserved7 : 1;
-+ /** OUT packet Error */
-+ unsigned outpkterr : 1;
-+ /** BNA Interrupt */
-+ unsigned bna : 1;
-+
-+ unsigned reserved10 : 1;
-+ /** Packet Drop Status */
-+ unsigned pktdrpsts : 1;
-+ /** Babble Interrupt */
-+ unsigned babble : 1;
-+ /** NAK Interrupt */
-+ unsigned nak : 1;
-+ /** NYET Interrupt */
-+ unsigned nyet : 1;
-+
-+ unsigned reserved15_31 : 17;
-+ } b;
-+} doepint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device OUT EP
-+ * Common/Dedicated Interrupt Mask Register.
-+ */
-+typedef union doepint_data doepmsk_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device All EP Interrupt
-+ * and Mask Registers.
-+ * - Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union daint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** IN Endpoint bits */
-+ unsigned in : 16;
-+ /** OUT Endpoint bits */
-+ unsigned out : 16;
-+ } ep;
-+ struct
-+ {
-+ /** IN Endpoint bits */
-+ unsigned inep0 : 1;
-+ unsigned inep1 : 1;
-+ unsigned inep2 : 1;
-+ unsigned inep3 : 1;
-+ unsigned inep4 : 1;
-+ unsigned inep5 : 1;
-+ unsigned inep6 : 1;
-+ unsigned inep7 : 1;
-+ unsigned inep8 : 1;
-+ unsigned inep9 : 1;
-+ unsigned inep10 : 1;
-+ unsigned inep11 : 1;
-+ unsigned inep12 : 1;
-+ unsigned inep13 : 1;
-+ unsigned inep14 : 1;
-+ unsigned inep15 : 1;
-+ /** OUT Endpoint bits */
-+ unsigned outep0 : 1;
-+ unsigned outep1 : 1;
-+ unsigned outep2 : 1;
-+ unsigned outep3 : 1;
-+ unsigned outep4 : 1;
-+ unsigned outep5 : 1;
-+ unsigned outep6 : 1;
-+ unsigned outep7 : 1;
-+ unsigned outep8 : 1;
-+ unsigned outep9 : 1;
-+ unsigned outep10 : 1;
-+ unsigned outep11 : 1;
-+ unsigned outep12 : 1;
-+ unsigned outep13 : 1;
-+ unsigned outep14 : 1;
-+ unsigned outep15 : 1;
-+ } b;
-+} daint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device IN Token Queue
-+ * Read Registers.
-+ * - Read the register into the <i>d32</i> member.
-+ * - READ-ONLY Register
-+ */
-+typedef union dtknq1_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** In Token Queue Write Pointer */
-+ unsigned intknwptr : 5;
-+ /** Reserved */
-+ unsigned reserved05_06 : 2;
-+ /** write pointer has wrapped. */
-+ unsigned wrap_bit : 1;
-+ /** EP Numbers of IN Tokens 0 ... 4 */
-+ unsigned epnums0_5 : 24;
-+ }b;
-+} dtknq1_data_t;
-+
-+/**
-+ * This union represents Threshold control Register
-+ * - Read and write the register into the <i>d32</i> member.
-+ * - READ-WRITABLE Register
-+ */
-+typedef union dthrctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** non ISO Tx Thr. Enable */
-+ unsigned non_iso_thr_en : 1;
-+ /** ISO Tx Thr. Enable */
-+ unsigned iso_thr_en : 1;
-+ /** Tx Thr. Length */
-+ unsigned tx_thr_len : 9;
-+ /** Reserved */
-+ unsigned reserved11_15 : 5;
-+ /** Rx Thr. Enable */
-+ unsigned rx_thr_en : 1;
-+ /** Rx Thr. Length */
-+ unsigned rx_thr_len : 9;
-+ /** Reserved */
-+ unsigned reserved26_31 : 6;
-+ }b;
-+} dthrctl_data_t;
-+
-+
-+/**
-+ * Device Logical IN Endpoint-Specific Registers. <i>Offsets
-+ * 900h-AFCh</i>
-+ *
-+ * There will be one set of endpoint registers per logical endpoint
-+ * implemented.
-+ *
-+ * <i>These registers are visible only in Device mode and must not be
-+ * accessed in Host mode, as the results are unknown.</i>
-+ */
-+typedef struct dwc_otg_dev_in_ep_regs
-+{
-+ /** Device IN Endpoint Control Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 00h</i> */
-+ volatile uint32_t diepctl;
-+ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
-+ uint32_t reserved04;
-+ /** Device IN Endpoint Interrupt Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 08h</i> */
-+ volatile uint32_t diepint;
-+ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
-+ uint32_t reserved0C;
-+ /** Device IN Endpoint Transfer Size
-+ * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
-+ volatile uint32_t dieptsiz;
-+ /** Device IN Endpoint DMA Address Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 14h</i> */
-+ volatile uint32_t diepdma;
-+ /** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 18h</i> */
-+ volatile uint32_t dtxfsts;
-+ /** Device IN Endpoint DMA Buffer Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 1Ch</i> */
-+ volatile uint32_t diepdmab;
-+} dwc_otg_dev_in_ep_regs_t;
-+
-+/**
-+ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
-+ * B00h-CFCh</i>
-+ *
-+ * There will be one set of endpoint registers per logical endpoint
-+ * implemented.
-+ *
-+ * <i>These registers are visible only in Device mode and must not be
-+ * accessed in Host mode, as the results are unknown.</i>
-+ */
-+typedef struct dwc_otg_dev_out_ep_regs
-+{
-+ /** Device OUT Endpoint Control Register. <i>Offset:B00h +
-+ * (ep_num * 20h) + 00h</i> */
-+ volatile uint32_t doepctl;
-+ /** Device OUT Endpoint Frame number Register. <i>Offset:
-+ * B00h + (ep_num * 20h) + 04h</i> */
-+ volatile uint32_t doepfn;
-+ /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
-+ * (ep_num * 20h) + 08h</i> */
-+ volatile uint32_t doepint;
-+ /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
-+ uint32_t reserved0C;
-+ /** Device OUT Endpoint Transfer Size Register. <i>Offset:
-+ * B00h + (ep_num * 20h) + 10h</i> */
-+ volatile uint32_t doeptsiz;
-+ /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
-+ * + (ep_num * 20h) + 14h</i> */
-+ volatile uint32_t doepdma;
-+ /** Reserved. <i>Offset:B00h + * (ep_num * 20h) + 1Ch</i> */
-+ uint32_t unused;
-+ /** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h
-+ * + (ep_num * 20h) + 1Ch</i> */
-+ uint32_t doepdmab;
-+} dwc_otg_dev_out_ep_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Device EP Control
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union depctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Maximum Packet Size
-+ * IN/OUT EPn
-+ * IN/OUT EP0 - 2 bits
-+ * 2'b00: 64 Bytes
-+ * 2'b01: 32
-+ * 2'b10: 16
-+ * 2'b11: 8 */
-+ unsigned mps : 11;
-+#define DWC_DEP0CTL_MPS_64 0
-+#define DWC_DEP0CTL_MPS_32 1
-+#define DWC_DEP0CTL_MPS_16 2
-+#define DWC_DEP0CTL_MPS_8 3
-+
-+ /** Next Endpoint
-+ * IN EPn/IN EP0
-+ * OUT EPn/OUT EP0 - reserved */
-+ unsigned nextep : 4;
-+
-+ /** USB Active Endpoint */
-+ unsigned usbactep : 1;
-+
-+ /** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
-+ * This field contains the PID of the packet going to
-+ * be received or transmitted on this endpoint. The
-+ * application should program the PID of the first
-+ * packet going to be received or transmitted on this
-+ * endpoint , after the endpoint is
-+ * activated. Application use the SetD1PID and
-+ * SetD0PID fields of this register to program either
-+ * D0 or D1 PID.
-+ *
-+ * The encoding for this field is
-+ * - 0: D0
-+ * - 1: D1
-+ */
-+ unsigned dpid : 1;
-+
-+ /** NAK Status */
-+ unsigned naksts : 1;
-+
-+ /** Endpoint Type
-+ * 2'b00: Control
-+ * 2'b01: Isochronous
-+ * 2'b10: Bulk
-+ * 2'b11: Interrupt */
-+ unsigned eptype : 2;
-+
-+ /** Snoop Mode
-+ * OUT EPn/OUT EP0
-+ * IN EPn/IN EP0 - reserved */
-+ unsigned snp : 1;
-+
-+ /** Stall Handshake */
-+ unsigned stall : 1;
-+
-+ /** Tx Fifo Number
-+ * IN EPn/IN EP0
-+ * OUT EPn/OUT EP0 - reserved */
-+ unsigned txfnum : 4;
-+
-+ /** Clear NAK */
-+ unsigned cnak : 1;
-+ /** Set NAK */
-+ unsigned snak : 1;
-+ /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
-+ * Writing to this field sets the Endpoint DPID (DPID)
-+ * field in this register to DATA0. Set Even
-+ * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
-+ * Writing to this field sets the Even/Odd
-+ * (micro)frame (EO_FrNum) field to even (micro)
-+ * frame.
-+ */
-+ unsigned setd0pid : 1;
-+ /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
-+ * Writing to this field sets the Endpoint DPID (DPID)
-+ * field in this register to DATA1 Set Odd
-+ * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
-+ * Writing to this field sets the Even/Odd
-+ * (micro)frame (EO_FrNum) field to odd (micro) frame.
-+ */
-+ unsigned setd1pid : 1;
-+
-+ /** Endpoint Disable */
-+ unsigned epdis : 1;
-+ /** Endpoint Enable */
-+ unsigned epena : 1;
-+ } b;
-+} depctl_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device EP Transfer
-+ * Size Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union deptsiz_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Transfer size */
-+ unsigned xfersize : 19;
-+ /** Packet Count */
-+ unsigned pktcnt : 10;
-+ /** Multi Count - Periodic IN endpoints */
-+ unsigned mc : 2;
-+ unsigned reserved : 1;
-+ } b;
-+} deptsiz_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device EP 0 Transfer
-+ * Size Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union deptsiz0_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Transfer size */
-+ unsigned xfersize : 7;
-+ /** Reserved */
-+ unsigned reserved7_18 : 12;
-+ /** Packet Count */
-+ unsigned pktcnt : 1;
-+ /** Reserved */
-+ unsigned reserved20_28 : 9;
-+ /**Setup Packet Count (DOEPTSIZ0 Only) */
-+ unsigned supcnt : 2;
-+ unsigned reserved31;
-+ } b;
-+} deptsiz0_data_t;
-+
-+
-+/////////////////////////////////////////////////
-+// DMA Descriptor Specific Structures
-+//
-+
-+/** Buffer status definitions */
-+
-+#define BS_HOST_READY 0x0
-+#define BS_DMA_BUSY 0x1
-+#define BS_DMA_DONE 0x2
-+#define BS_HOST_BUSY 0x3
-+
-+/** Receive/Transmit status definitions */
-+
-+#define RTS_SUCCESS 0x0
-+#define RTS_BUFFLUSH 0x1
-+#define RTS_RESERVED 0x2
-+#define RTS_BUFERR 0x3
-+
-+
-+/**
-+ * This union represents the bit fields in the DMA Descriptor
-+ * status quadlet. Read the quadlet into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and
-+ * <i>b_iso_in</i> elements.
-+ */
-+typedef union desc_sts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** quadlet bits */
-+ struct {
-+ /** Received number of bytes */
-+ unsigned bytes : 16;
-+
-+ unsigned reserved16_22 : 7;
-+ /** Multiple Transfer - only for OUT EPs */
-+ unsigned mtrf : 1;
-+ /** Setup Packet received - only for OUT EPs */
-+ unsigned sr : 1;
-+ /** Interrupt On Complete */
-+ unsigned ioc : 1;
-+ /** Short Packet */
-+ unsigned sp : 1;
-+ /** Last */
-+ unsigned l : 1;
-+ /** Receive Status */
-+ unsigned sts : 2;
-+ /** Buffer Status */
-+ unsigned bs : 2;
-+ } b;
-+
-+#ifdef DWC_EN_ISOC
-+ /** iso out quadlet bits */
-+ struct {
-+ /** Received number of bytes */
-+ unsigned rxbytes : 11;
-+
-+ unsigned reserved11 : 1;
-+ /** Frame Number */
-+ unsigned framenum : 11;
-+ /** Received ISO Data PID */
-+ unsigned pid : 2;
-+ /** Interrupt On Complete */
-+ unsigned ioc : 1;
-+ /** Short Packet */
-+ unsigned sp : 1;
-+ /** Last */
-+ unsigned l : 1;
-+ /** Receive Status */
-+ unsigned rxsts : 2;
-+ /** Buffer Status */
-+ unsigned bs : 2;
-+ } b_iso_out;
-+
-+ /** iso in quadlet bits */
-+ struct {
-+ /** Transmited number of bytes */
-+ unsigned txbytes : 12;
-+ /** Frame Number */
-+ unsigned framenum : 11;
-+ /** Transmited ISO Data PID */
-+ unsigned pid : 2;
-+ /** Interrupt On Complete */
-+ unsigned ioc : 1;
-+ /** Short Packet */
-+ unsigned sp : 1;
-+ /** Last */
-+ unsigned l : 1;
-+ /** Transmit Status */
-+ unsigned txsts : 2;
-+ /** Buffer Status */
-+ unsigned bs : 2;
-+ } b_iso_in;
-+#endif //DWC_EN_ISOC
-+} desc_sts_data_t;
-+
-+/**
-+ * DMA Descriptor structure
-+ *
-+ * DMA Descriptor structure contains two quadlets:
-+ * Status quadlet and Data buffer pointer.
-+ */
-+typedef struct dwc_otg_dma_desc
-+{
-+ /** DMA Descriptor status quadlet */
-+ desc_sts_data_t status;
-+ /** DMA Descriptor data buffer pointer */
-+ dma_addr_t buf;
-+} dwc_otg_dma_desc_t;
-+
-+/**
-+ * The dwc_otg_dev_if structure contains information needed to manage
-+ * the DWC_otg controller acting in device mode. It represents the
-+ * programming view of the device-specific aspects of the controller.
-+ */
-+typedef struct dwc_otg_dev_if
-+{
-+ /** Pointer to device Global registers.
-+ * Device Global Registers starting at offset 800h
-+ */
-+ dwc_otg_device_global_regs_t *dev_global_regs;
-+#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
-+
-+ /**
-+ * Device Logical IN Endpoint-Specific Registers 900h-AFCh
-+ */
-+ dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS];
-+#define DWC_DEV_IN_EP_REG_OFFSET 0x900
-+#define DWC_EP_REG_OFFSET 0x20
-+
-+ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
-+ dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];
-+#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
-+
-+ /* Device configuration information*/
-+ uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */
-+ uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */
-+ uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/
-+
-+ /** Size of periodic FIFOs (Bytes) */
-+ uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
-+
-+ /** Size of Tx FIFOs (Bytes) */
-+ uint16_t tx_fifo_size[MAX_TX_FIFOS];
-+
-+ /** Thresholding enable flags and length varaiables **/
-+ uint16_t rx_thr_en;
-+ uint16_t iso_tx_thr_en;
-+ uint16_t non_iso_tx_thr_en;
-+
-+ uint16_t rx_thr_length;
-+ uint16_t tx_thr_length;
-+
-+ /**
-+ * Pointers to the DMA Descriptors for EP0 Control
-+ * transfers (virtual and physical)
-+ */
-+
-+ /** 2 descriptors for SETUP packets */
-+ uint32_t dma_setup_desc_addr[2];
-+ dwc_otg_dma_desc_t* setup_desc_addr[2];
-+
-+ /** Pointer to Descriptor with latest SETUP packet */
-+ dwc_otg_dma_desc_t* psetup;
-+
-+ /** Index of current SETUP handler descriptor */
-+ uint32_t setup_desc_index;
-+
-+ /** Descriptor for Data In or Status In phases */
-+ uint32_t dma_in_desc_addr;
-+ dwc_otg_dma_desc_t* in_desc_addr;;
-+
-+ /** Descriptor for Data Out or Status Out phases */
-+ uint32_t dma_out_desc_addr;
-+ dwc_otg_dma_desc_t* out_desc_addr;
-+
-+} dwc_otg_dev_if_t;
-+
-+
-+
-+
-+/////////////////////////////////////////////////
-+// Host Mode Register Structures
-+//
-+/**
-+ * The Host Global Registers structure defines the size and relative
-+ * field offsets for the Host Mode Global Registers. Host Global
-+ * Registers offsets 400h-7FFh.
-+*/
-+typedef struct dwc_otg_host_global_regs
-+{
-+ /** Host Configuration Register. <i>Offset: 400h</i> */
-+ volatile uint32_t hcfg;
-+ /** Host Frame Interval Register. <i>Offset: 404h</i> */
-+ volatile uint32_t hfir;
-+ /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
-+ volatile uint32_t hfnum;
-+ /** Reserved. <i>Offset: 40Ch</i> */
-+ uint32_t reserved40C;
-+ /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
-+ volatile uint32_t hptxsts;
-+ /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
-+ volatile uint32_t haint;
-+ /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
-+ volatile uint32_t haintmsk;
-+} dwc_otg_host_global_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Configuration Register.
-+ * Read the register into the <i>d32</i> member then set/clear the bits using
-+ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
-+ */
-+typedef union hcfg_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ /** FS/LS Phy Clock Select */
-+ unsigned fslspclksel : 2;
-+#define DWC_HCFG_30_60_MHZ 0
-+#define DWC_HCFG_48_MHZ 1
-+#define DWC_HCFG_6_MHZ 2
-+
-+ /** FS/LS Only Support */
-+ unsigned fslssupp : 1;
-+ } b;
-+} hcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Frame Remaing/Number
-+ * Register.
-+ */
-+typedef union hfir_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ unsigned frint : 16;
-+ unsigned reserved : 16;
-+ } b;
-+} hfir_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Frame Remaing/Number
-+ * Register.
-+ */
-+typedef union hfnum_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ unsigned frnum : 16;
-+#define DWC_HFNUM_MAX_FRNUM 0x3FFF
-+ unsigned frrem : 16;
-+ } b;
-+} hfnum_data_t;
-+
-+typedef union hptxsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ unsigned ptxfspcavail : 16;
-+ unsigned ptxqspcavail : 8;
-+ /** Top of the Periodic Transmit Request Queue
-+ * - bit 24 - Terminate (last entry for the selected channel)
-+ * - bits 26:25 - Token Type
-+ * - 2'b00 - Zero length
-+ * - 2'b01 - Ping
-+ * - 2'b10 - Disable
-+ * - bits 30:27 - Channel Number
-+ * - bit 31 - Odd/even microframe
-+ */
-+ unsigned ptxqtop_terminate : 1;
-+ unsigned ptxqtop_token : 2;
-+ unsigned ptxqtop_chnum : 4;
-+ unsigned ptxqtop_odd : 1;
-+ } b;
-+} hptxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Port Control and Status
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hprt0 register.
-+ */
-+typedef union hprt0_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned prtconnsts : 1;
-+ unsigned prtconndet : 1;
-+ unsigned prtena : 1;
-+ unsigned prtenchng : 1;
-+ unsigned prtovrcurract : 1;
-+ unsigned prtovrcurrchng : 1;
-+ unsigned prtres : 1;
-+ unsigned prtsusp : 1;
-+ unsigned prtrst : 1;
-+ unsigned reserved9 : 1;
-+ unsigned prtlnsts : 2;
-+ unsigned prtpwr : 1;
-+ unsigned prttstctl : 4;
-+ unsigned prtspd : 2;
-+#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
-+#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
-+#define DWC_HPRT0_PRTSPD_LOW_SPEED 2
-+ unsigned reserved19_31 : 13;
-+ } b;
-+} hprt0_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host All Interrupt
-+ * Register.
-+ */
-+typedef union haint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned ch0 : 1;
-+ unsigned ch1 : 1;
-+ unsigned ch2 : 1;
-+ unsigned ch3 : 1;
-+ unsigned ch4 : 1;
-+ unsigned ch5 : 1;
-+ unsigned ch6 : 1;
-+ unsigned ch7 : 1;
-+ unsigned ch8 : 1;
-+ unsigned ch9 : 1;
-+ unsigned ch10 : 1;
-+ unsigned ch11 : 1;
-+ unsigned ch12 : 1;
-+ unsigned ch13 : 1;
-+ unsigned ch14 : 1;
-+ unsigned ch15 : 1;
-+ unsigned reserved : 16;
-+ } b;
-+
-+ struct
-+ {
-+ unsigned chint : 16;
-+ unsigned reserved : 16;
-+ } b2;
-+} haint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host All Interrupt
-+ * Register.
-+ */
-+typedef union haintmsk_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned ch0 : 1;
-+ unsigned ch1 : 1;
-+ unsigned ch2 : 1;
-+ unsigned ch3 : 1;
-+ unsigned ch4 : 1;
-+ unsigned ch5 : 1;
-+ unsigned ch6 : 1;
-+ unsigned ch7 : 1;
-+ unsigned ch8 : 1;
-+ unsigned ch9 : 1;
-+ unsigned ch10 : 1;
-+ unsigned ch11 : 1;
-+ unsigned ch12 : 1;
-+ unsigned ch13 : 1;
-+ unsigned ch14 : 1;
-+ unsigned ch15 : 1;
-+ unsigned reserved : 16;
-+ } b;
-+
-+ struct
-+ {
-+ unsigned chint : 16;
-+ unsigned reserved : 16;
-+ } b2;
-+} haintmsk_data_t;
-+
-+/**
-+ * Host Channel Specific Registers. <i>500h-5FCh</i>
-+ */
-+typedef struct dwc_otg_hc_regs
-+{
-+ /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
-+ volatile uint32_t hcchar;
-+ /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
-+ volatile uint32_t hcsplt;
-+ /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
-+ volatile uint32_t hcint;
-+ /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
-+ volatile uint32_t hcintmsk;
-+ /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
-+ volatile uint32_t hctsiz;
-+ /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
-+ volatile uint32_t hcdma;
-+ /** Reserved. <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */
-+ uint32_t reserved[2];
-+} dwc_otg_hc_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Channel Characteristics
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hcchar register.
-+ */
-+typedef union hcchar_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ /** Maximum packet size in bytes */
-+ unsigned mps : 11;
-+
-+ /** Endpoint number */
-+ unsigned epnum : 4;
-+
-+ /** 0: OUT, 1: IN */
-+ unsigned epdir : 1;
-+
-+ unsigned reserved : 1;
-+
-+ /** 0: Full/high speed device, 1: Low speed device */
-+ unsigned lspddev : 1;
-+
-+ /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
-+ unsigned eptype : 2;
-+
-+ /** Packets per frame for periodic transfers. 0 is reserved. */
-+ unsigned multicnt : 2;
-+
-+ /** Device address */
-+ unsigned devaddr : 7;
-+
-+ /**
-+ * Frame to transmit periodic transaction.
-+ * 0: even, 1: odd
-+ */
-+ unsigned oddfrm : 1;
-+
-+ /** Channel disable */
-+ unsigned chdis : 1;
-+
-+ /** Channel enable */
-+ unsigned chen : 1;
-+ } b;
-+} hcchar_data_t;
-+
-+typedef union hcsplt_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ /** Port Address */
-+ unsigned prtaddr : 7;
-+
-+ /** Hub Address */
-+ unsigned hubaddr : 7;
-+
-+ /** Transaction Position */
-+ unsigned xactpos : 2;
-+#define DWC_HCSPLIT_XACTPOS_MID 0
-+#define DWC_HCSPLIT_XACTPOS_END 1
-+#define DWC_HCSPLIT_XACTPOS_BEGIN 2
-+#define DWC_HCSPLIT_XACTPOS_ALL 3
-+
-+ /** Do Complete Split */
-+ unsigned compsplt : 1;
-+
-+ /** Reserved */
-+ unsigned reserved : 14;
-+
-+ /** Split Enble */
-+ unsigned spltena : 1;
-+ } b;
-+} hcsplt_data_t;
-+
-+
-+/**
-+ * This union represents the bit fields in the Host All Interrupt
-+ * Register.
-+ */
-+typedef union hcint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Transfer Complete */
-+ unsigned xfercomp : 1;
-+ /** Channel Halted */
-+ unsigned chhltd : 1;
-+ /** AHB Error */
-+ unsigned ahberr : 1;
-+ /** STALL Response Received */
-+ unsigned stall : 1;
-+ /** NAK Response Received */
-+ unsigned nak : 1;
-+ /** ACK Response Received */
-+ unsigned ack : 1;
-+ /** NYET Response Received */
-+ unsigned nyet : 1;
-+ /** Transaction Err */
-+ unsigned xacterr : 1;
-+ /** Babble Error */
-+ unsigned bblerr : 1;
-+ /** Frame Overrun */
-+ unsigned frmovrun : 1;
-+ /** Data Toggle Error */
-+ unsigned datatglerr : 1;
-+ /** Reserved */
-+ unsigned reserved : 21;
-+ } b;
-+} hcint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Channel Transfer Size
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hcchar register.
-+ */
-+typedef union hctsiz_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ /** Total transfer size in bytes */
-+ unsigned xfersize : 19;
-+
-+ /** Data packets to transfer */
-+ unsigned pktcnt : 10;
-+
-+ /**
-+ * Packet ID for next data packet
-+ * 0: DATA0
-+ * 1: DATA2
-+ * 2: DATA1
-+ * 3: MDATA (non-Control), SETUP (Control)
-+ */
-+ unsigned pid : 2;
-+#define DWC_HCTSIZ_DATA0 0
-+#define DWC_HCTSIZ_DATA1 2
-+#define DWC_HCTSIZ_DATA2 1
-+#define DWC_HCTSIZ_MDATA 3
-+#define DWC_HCTSIZ_SETUP 3
-+
-+ /** Do PING protocol when 1 */
-+ unsigned dopng : 1;
-+ } b;
-+} hctsiz_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Channel Interrupt Mask
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hcintmsk register.
-+ */
-+typedef union hcintmsk_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ unsigned xfercompl : 1;
-+ unsigned chhltd : 1;
-+ unsigned ahberr : 1;
-+ unsigned stall : 1;
-+ unsigned nak : 1;
-+ unsigned ack : 1;
-+ unsigned nyet : 1;
-+ unsigned xacterr : 1;
-+ unsigned bblerr : 1;
-+ unsigned frmovrun : 1;
-+ unsigned datatglerr : 1;
-+ unsigned reserved : 21;
-+ } b;
-+} hcintmsk_data_t;
-+
-+/** OTG Host Interface Structure.
-+ *
-+ * The OTG Host Interface Structure structure contains information
-+ * needed to manage the DWC_otg controller acting in host mode. It
-+ * represents the programming view of the host-specific aspects of the
-+ * controller.
-+ */
-+typedef struct dwc_otg_host_if
-+{
-+ /** Host Global Registers starting at offset 400h.*/
-+ dwc_otg_host_global_regs_t *host_global_regs;
-+#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
-+
-+ /** Host Port 0 Control and Status Register */
-+ volatile uint32_t *hprt0;
-+#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
-+
-+
-+ /** Host Channel Specific Registers at offsets 500h-5FCh. */
-+ dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
-+#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
-+#define DWC_OTG_CHAN_REGS_OFFSET 0x20
-+
-+
-+ /* Host configuration information */
-+ /** Number of Host Channels (range: 1-16) */
-+ uint8_t num_host_channels;
-+ /** Periodic EPs supported (0: no, 1: yes) */
-+ uint8_t perio_eps_supported;
-+ /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
-+ uint16_t perio_tx_fifo_size;
-+
-+} dwc_otg_host_if_t;
-+
-+
-+/**
-+ * This union represents the bit fields in the Power and Clock Gating Control
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union pcgcctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ /** Stop Pclk */
-+ unsigned stoppclk : 1;
-+ /** Gate Hclk */
-+ unsigned gatehclk : 1;
-+ /** Power Clamp */
-+ unsigned pwrclmp : 1;
-+ /** Reset Power Down Modules */
-+ unsigned rstpdwnmodule : 1;
-+ /** PHY Suspended */
-+ unsigned physuspended : 1;
-+
-+ unsigned reserved : 27;
-+ } b;
-+} pcgcctl_data_t;
-+
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/otg/Makefile
-@@ -0,0 +1,52 @@
-+#
-+# Makefile for DWC_otg Highspeed USB controller driver
-+#
-+
-+ifneq ($(KERNELRELEASE),)
-+EXTRA_CFLAGS += -DDEBUG
-+
-+# Use one of the following flags to compile the software in host-only or
-+# device-only mode.
-+#CPPFLAGS += -DDWC_HOST_ONLY
-+#CPPFLAGS += -DDWC_DEVICE_ONLY
-+
-+EXTRA_CFLAGS += -Dlinux -DDWC_HS_ELECT_TST
-+#EXTRA_CFLAGS += -DDWC_EN_ISOC
-+
-+ifneq ($(CONFIG_USB_CNS3XXX_OTG_HCD_ONLY),)
-+EXTRA_CFLAGS += -DDWC_HOST_ONLY
-+endif
-+
-+ifneq ($(CONFIG_USB_CNS3XXX_OTG_PCD_ONLY),)
-+EXTRA_CFLAGS += -DDWC_DEVICE_ONLY
-+endif
-+
-+obj-$(CONFIG_USB_CNS3XXX_OTG) := dwc_otg.o
-+#obj-$(CONFIG_USB_GADGET_CNS3XXX_OTG) := dwc_otg.o
-+
-+dwc_otg-objs := dwc_otg_driver.o dwc_otg_attr.o
-+dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o
-+dwc_otg-objs += dwc_otg_pcd.o dwc_otg_pcd_intr.o
-+dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o
-+
-+else
-+
-+PWD := $(shell pwd)
-+
-+# Command paths
-+CTAGS := $(CTAGS)
-+DOXYGEN := $(DOXYGEN)
-+
-+default:
-+ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
-+
-+docs: $(wildcard *.[hc]) doc/doxygen.cfg
-+ $(DOXYGEN) doc/doxygen.cfg
-+
-+tags: $(wildcard *.[hc])
-+ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h)
-+
-+endif
-+
-+clean:
-+ rm -rf *.o *.ko .*cmd *.mod.c .tmp_versions
---- a/drivers/usb/Kconfig
-+++ b/drivers/usb/Kconfig
-@@ -39,6 +39,7 @@ config USB_ARCH_HAS_OHCI
- default y if ARCH_AT91
- default y if ARCH_PNX4008 && I2C
- default y if MFD_TC6393XB
-+ default y if ARCH_CNS3XXX
- # PPC:
- default y if STB03xxx
- default y if PPC_MPC52xx
-@@ -58,6 +59,7 @@ config USB_ARCH_HAS_EHCI
- default y if PPC_83xx
- default y if SOC_AU1200
- default y if ARCH_IXP4XX
-+ default y if ARCH_CNS3XXX
- default PCI
-
- # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -20,6 +20,8 @@ obj-$(CONFIG_USB_U132_HCD) += host/
- obj-$(CONFIG_USB_R8A66597_HCD) += host/
- obj-$(CONFIG_USB_HWA_HCD) += host/
- obj-$(CONFIG_USB_ISP1760_HCD) += host/
-+obj-$(CONFIG_USB_CNS3XXX_OTG) += host/
-+obj-$(CONFIG_USB_GADGET_CNS3XXX_OTG) += host/
-
- obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
-
---- a/drivers/usb/storage/protocol.c
-+++ b/drivers/usb/storage/protocol.c
-@@ -182,9 +182,10 @@ unsigned int usb_stor_access_xfer_buf(un
- PAGE_SIZE - poff);
- unsigned char *ptr = kmap(page);
-
-- if (dir == TO_XFER_BUF)
-+ if (dir == TO_XFER_BUF) {
- memcpy(ptr + poff, buffer + cnt, plen);
-- else
-+ flush_dcache_page(page);
-+ } else
- memcpy(buffer + cnt, ptr + poff, plen);
- kunmap(page);
-
---- a/include/linux/usb.h
-+++ b/include/linux/usb.h
-@@ -1201,8 +1201,14 @@ struct urb {
- unsigned int pipe; /* (in) pipe information */
- int status; /* (return) non-ISO status */
- unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/
-+
- void *transfer_buffer; /* (in) associated data buffer */
- dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */
-+
-+ void * aligned_transfer_buffer; /* (in) associated data buffer */
-+ dma_addr_t aligned_transfer_dma; /* (in) dma addr for transfer_buffer */
-+ u32 aligned_transfer_buffer_length; /* (in) data buffer length */
-+
- struct usb_sg_request *sg; /* (in) scatter gather buffer list */
- int num_sgs; /* (in) number of entries in the sg list */
- u32 transfer_buffer_length; /* (in) data buffer length */
+++ /dev/null
---- /dev/null
-+++ b/drivers/watchdog/cns3xxx_wdt.c
-@@ -0,0 +1,465 @@
-+/*******************************************************************************
-+ *
-+ * drivers/watchdog/cns3xxx_wdt.c
-+ *
-+ * Watchdog timer driver for the CNS3XXX SOCs
-+ *
-+ * Author: Scott Shu
-+ *
-+ * Copyright (c) 2008 Cavium Networks
-+ *
-+ * This file is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, Version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
-+ * NONINFRINGEMENT. See the GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this file; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
-+ * visit http://www.gnu.org/licenses/.
-+ *
-+ * This file may also be available under a different license from Cavium.
-+ * Contact Cavium Networks for more information
-+ *
-+ ******************************************************************************/
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/fs.h>
-+#include <linux/reboot.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/uaccess.h>
-+
-+#include <asm/hardware/arm_twd.h>
-+
-+struct cns3xxx_wdt {
-+ unsigned long timer_alive;
-+ struct device *dev;
-+ void __iomem *base;
-+ int irq;
-+ unsigned int perturb;
-+ char expect_close;
-+};
-+
-+static struct platform_device *cns3xxx_wdt_dev;
-+extern unsigned int twd_timer_rate;
-+static spinlock_t wdt_lock;
-+
-+#define TIMER_MARGIN 60
-+static int cns3xxx_margin = TIMER_MARGIN;
-+module_param(cns3xxx_margin, int, 0);
-+MODULE_PARM_DESC(cns3xxx_margin,
-+ "CNS3XXX timer margin in seconds. (0 < cns3xxx_margin < 65536, default="
-+ __MODULE_STRING(TIMER_MARGIN) ")");
-+
-+static int nowayout = WATCHDOG_NOWAYOUT;
-+module_param(nowayout, int, 0);
-+MODULE_PARM_DESC(nowayout,
-+ "Watchdog cannot be stopped once started (default="
-+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-+
-+#define ONLY_TESTING 0
-+static int cns3xxx_noboot = ONLY_TESTING;
-+module_param(cns3xxx_noboot, int, 0);
-+MODULE_PARM_DESC(cns3xxx_noboot, "CNS3XXX watchdog action, "
-+ "set to 1 to ignore reboots, 0 to reboot (default="
-+ __MODULE_STRING(ONLY_TESTING) ")");
-+
-+/*
-+ * This is the interrupt handler. Note that we only use this
-+ * in testing mode, so don't actually do a reboot here.
-+ */
-+static irqreturn_t cns3xxx_wdt_fire(int irq, void *arg)
-+{
-+ struct cns3xxx_wdt *wdt = arg;
-+
-+ /* Check it really was our interrupt */
-+ if (readl(wdt->base + TWD_WDOG_INTSTAT)) {
-+ dev_printk(KERN_CRIT, wdt->dev,
-+ "Triggered - Reboot ignored.\n");
-+ /* Clear the interrupt on the watchdog */
-+ writel(1, wdt->base + TWD_WDOG_INTSTAT);
-+ return IRQ_HANDLED;
-+ }
-+ return IRQ_NONE;
-+}
-+
-+/*
-+ * cns3xxx_wdt_keepalive - reload the timer
-+ *
-+ * Note that the spec says a DIFFERENT value must be written to the reload
-+ * register each time. The "perturb" variable deals with this by adding 1
-+ * to the count every other time the function is called.
-+ */
-+static void cns3xxx_wdt_keepalive(struct cns3xxx_wdt *wdt)
-+{
-+ unsigned int count;
-+
-+ /* Assume prescale is set to 256 */
-+ count = (twd_timer_rate / 256) * cns3xxx_margin;
-+
-+ /* Reload the counter */
-+ spin_lock(&wdt_lock);
-+ writel(count + wdt->perturb, wdt->base + TWD_WDOG_LOAD);
-+ wdt->perturb = wdt->perturb ? 0 : 1;
-+ spin_unlock(&wdt_lock);
-+}
-+
-+static void cns3xxx_wdt_stop(struct cns3xxx_wdt *wdt)
-+{
-+ spin_lock(&wdt_lock);
-+ writel(0x12345678, wdt->base + TWD_WDOG_DISABLE);
-+ writel(0x87654321, wdt->base + TWD_WDOG_DISABLE);
-+ writel(0x0, wdt->base + TWD_WDOG_CONTROL);
-+ spin_unlock(&wdt_lock);
-+}
-+
-+static void cns3xxx_wdt_start(struct cns3xxx_wdt *wdt)
-+{
-+ dev_printk(KERN_INFO, wdt->dev, "enabling watchdog.\n");
-+
-+ //spin_lock(&wdt_lock);
-+ /* This loads the count register but does NOT start the count yet */
-+ cns3xxx_wdt_keepalive(wdt);
-+ spin_lock(&wdt_lock);
-+
-+ if (cns3xxx_noboot) {
-+ /* Enable watchdog - prescale=256, watchdog mode=0, enable=1 */
-+ writel(0x0000FF01, wdt->base + TWD_WDOG_CONTROL);
-+ } else {
-+ /* Enable watchdog - prescale=256, watchdog mode=1, enable=1 */
-+ writel(0x0000FF09, wdt->base + TWD_WDOG_CONTROL);
-+ }
-+ spin_unlock(&wdt_lock);
-+}
-+
-+static int cns3xxx_wdt_set_heartbeat(int t)
-+{
-+ if (t < 0x0001 || t > 0xFFFF)
-+ return -EINVAL;
-+
-+ cns3xxx_margin = t;
-+ return 0;
-+}
-+
-+/*
-+ * /dev/watchdog handling
-+ */
-+static int cns3xxx_wdt_open(struct inode *inode, struct file *file)
-+{
-+ struct cns3xxx_wdt *wdt = platform_get_drvdata(cns3xxx_wdt_dev);
-+
-+ if (test_and_set_bit(0, &wdt->timer_alive))
-+ return -EBUSY;
-+
-+ if (nowayout)
-+ __module_get(THIS_MODULE);
-+
-+ file->private_data = wdt;
-+
-+ /*
-+ * Activate timer
-+ */
-+ cns3xxx_wdt_start(wdt);
-+
-+ return nonseekable_open(inode, file);
-+}
-+
-+static int cns3xxx_wdt_release(struct inode *inode, struct file *file)
-+{
-+ struct cns3xxx_wdt *wdt = file->private_data;
-+
-+ /*
-+ * Shut off the timer.
-+ * Lock it in if it's a module and we set nowayout
-+ */
-+ if (wdt->expect_close == 42)
-+ cns3xxx_wdt_stop(wdt);
-+ else {
-+ dev_printk(KERN_CRIT, wdt->dev,
-+ "unexpected close, not stopping watchdog!\n");
-+ cns3xxx_wdt_keepalive(wdt);
-+ }
-+ clear_bit(0, &wdt->timer_alive);
-+ wdt->expect_close = 0;
-+ return 0;
-+}
-+
-+static ssize_t cns3xxx_wdt_write(struct file *file, const char *data,
-+ size_t len, loff_t *ppos)
-+{
-+ struct cns3xxx_wdt *wdt = file->private_data;
-+
-+ /*
-+ * Refresh the timer.
-+ */
-+ if (len) {
-+ if (!nowayout) {
-+ size_t i;
-+
-+ /* In case it was set long ago */
-+ wdt->expect_close = 0;
-+
-+ for (i = 0; i != len; i++) {
-+ char c;
-+
-+ if (get_user(c, data + i))
-+ return -EFAULT;
-+ if (c == 'V')
-+ wdt->expect_close = 42;
-+ }
-+ }
-+ cns3xxx_wdt_keepalive(wdt);
-+ }
-+ return len;
-+}
-+
-+static struct watchdog_info ident = {
-+ .options = WDIOF_SETTIMEOUT |
-+ WDIOF_KEEPALIVEPING |
-+ WDIOF_MAGICCLOSE,
-+ .identity = "CNS3XXX Watchdog",
-+};
-+
-+static long cns3xxx_wdt_ioctl(struct file *file, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ struct cns3xxx_wdt *wdt = file->private_data;
-+ int ret;
-+ union {
-+ struct watchdog_info ident;
-+ int i;
-+ } uarg;
-+
-+ if (_IOC_DIR(cmd) && _IOC_SIZE(cmd) > sizeof(uarg))
-+ return -ENOTTY;
-+
-+ if (_IOC_DIR(cmd) & _IOC_WRITE) {
-+ ret = copy_from_user(&uarg, (void __user *)arg, _IOC_SIZE(cmd));
-+ if (ret)
-+ return -EFAULT;
-+ }
-+
-+ switch (cmd) {
-+ case WDIOC_GETSUPPORT:
-+ uarg.ident = ident;
-+ ret = 0;
-+ break;
-+
-+ case WDIOC_GETSTATUS:
-+ case WDIOC_GETBOOTSTATUS:
-+ uarg.i = 0;
-+ ret = 0;
-+ break;
-+
-+ case WDIOC_SETOPTIONS:
-+ ret = -EINVAL;
-+ if (uarg.i & WDIOS_DISABLECARD) {
-+ cns3xxx_wdt_stop(wdt);
-+ ret = 0;
-+ }
-+ if (uarg.i & WDIOS_ENABLECARD) {
-+ cns3xxx_wdt_start(wdt);
-+ ret = 0;
-+ }
-+ break;
-+
-+ case WDIOC_KEEPALIVE:
-+ cns3xxx_wdt_keepalive(wdt);
-+ ret = 0;
-+ break;
-+
-+ case WDIOC_SETTIMEOUT:
-+ ret = cns3xxx_wdt_set_heartbeat(uarg.i);
-+ if (ret)
-+ break;
-+
-+ cns3xxx_wdt_keepalive(wdt);
-+ /* Fall */
-+ case WDIOC_GETTIMEOUT:
-+ uarg.i = cns3xxx_margin;
-+ ret = 0;
-+ break;
-+
-+ default:
-+ return -ENOTTY;
-+ }
-+
-+ if (ret == 0 && _IOC_DIR(cmd) & _IOC_READ) {
-+ ret = copy_to_user((void __user *)arg, &uarg, _IOC_SIZE(cmd));
-+ if (ret)
-+ ret = -EFAULT;
-+ }
-+ return ret;
-+}
-+
-+/*
-+ * System shutdown handler. Turn off the watchdog if we're
-+ * restarting or halting the system.
-+ */
-+static void cns3xxx_wdt_shutdown(struct platform_device *dev)
-+{
-+ struct cns3xxx_wdt *wdt = platform_get_drvdata(dev);
-+
-+ if (system_state == SYSTEM_RESTART || system_state == SYSTEM_HALT)
-+ cns3xxx_wdt_stop(wdt);
-+}
-+
-+/*
-+ * Kernel Interfaces
-+ */
-+static const struct file_operations cns3xxx_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .write = cns3xxx_wdt_write,
-+ .unlocked_ioctl = cns3xxx_wdt_ioctl,
-+ .open = cns3xxx_wdt_open,
-+ .release = cns3xxx_wdt_release,
-+};
-+
-+static struct miscdevice cns3xxx_wdt_miscdev = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &cns3xxx_wdt_fops,
-+};
-+
-+static int __devinit cns3xxx_wdt_probe(struct platform_device *dev)
-+{
-+ struct cns3xxx_wdt *wdt;
-+ struct resource *res;
-+ int ret;
-+
-+ /* We only accept one device, and it must have an id of -1 */
-+ if (dev->id != -1)
-+ return -ENODEV;
-+
-+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ ret = -ENODEV;
-+ goto err_out;
-+ }
-+
-+ wdt = kzalloc(sizeof(struct cns3xxx_wdt), GFP_KERNEL);
-+ if (!wdt) {
-+ ret = -ENOMEM;
-+ goto err_out;
-+ }
-+
-+ wdt->dev = &dev->dev;
-+ wdt->irq = platform_get_irq(dev, 0);
-+ if (wdt->irq < 0) {
-+ ret = -ENXIO;
-+ goto err_free;
-+ }
-+ wdt->base = ioremap(res->start, res->end - res->start + 1);
-+ if (!wdt->base) {
-+ ret = -ENOMEM;
-+ goto err_free;
-+ }
-+
-+ cns3xxx_wdt_miscdev.parent = &dev->dev;
-+ ret = misc_register(&cns3xxx_wdt_miscdev);
-+ if (ret) {
-+ dev_printk(KERN_ERR, wdt->dev,
-+ "cannot register miscdev on minor=%d (err=%d)\n",
-+ WATCHDOG_MINOR, ret);
-+ goto err_misc;
-+ }
-+
-+ ret = request_irq(wdt->irq, cns3xxx_wdt_fire, IRQF_DISABLED,
-+ dev->name, wdt);
-+ if (ret) {
-+ dev_printk(KERN_ERR, wdt->dev,
-+ "cannot register IRQ%d for watchdog\n", wdt->irq);
-+ goto err_irq;
-+ }
-+
-+ cns3xxx_wdt_stop(wdt);
-+ platform_set_drvdata(dev, wdt);
-+ cns3xxx_wdt_dev = dev;
-+
-+ return 0;
-+
-+err_irq:
-+ misc_deregister(&cns3xxx_wdt_miscdev);
-+err_misc:
-+ platform_set_drvdata(dev, NULL);
-+ iounmap(wdt->base);
-+err_free:
-+ kfree(wdt);
-+err_out:
-+ return ret;
-+}
-+
-+static int __devexit cns3xxx_wdt_remove(struct platform_device *dev)
-+{
-+ struct cns3xxx_wdt *wdt = platform_get_drvdata(dev);
-+
-+ platform_set_drvdata(dev, NULL);
-+
-+ misc_deregister(&cns3xxx_wdt_miscdev);
-+
-+ cns3xxx_wdt_dev = NULL;
-+
-+ free_irq(wdt->irq, wdt);
-+ iounmap(wdt->base);
-+ kfree(wdt);
-+ return 0;
-+}
-+
-+
-+static struct platform_driver cns3xxx_wdt_driver = {
-+ .probe = cns3xxx_wdt_probe,
-+ .remove = __devexit_p(cns3xxx_wdt_remove),
-+ .shutdown = cns3xxx_wdt_shutdown,
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "cns3xxx-wdt",
-+ },
-+};
-+
-+static char banner[] __initdata = KERN_INFO
-+ "CNS3XXX Watchdog Timer, noboot=%d margin=%d sec (nowayout= %d)\n";
-+
-+static int __init cns3xxx_wdt_init(void)
-+{
-+ /*
-+ * Check that the margin value is within it's range;
-+ * if not reset to the default
-+ */
-+ if (cns3xxx_wdt_set_heartbeat(cns3xxx_margin)) {
-+ cns3xxx_wdt_set_heartbeat(TIMER_MARGIN);
-+ printk(KERN_INFO "cns3xxx_margin value must be 0 < cns3xxx_margin < 65536, using %d\n",
-+ TIMER_MARGIN);
-+ }
-+
-+ printk(banner, cns3xxx_noboot, cns3xxx_margin, nowayout);
-+
-+ spin_lock_init(&wdt_lock);
-+
-+ return platform_driver_register(&cns3xxx_wdt_driver);
-+}
-+
-+static void __exit cns3xxx_wdt_exit(void)
-+{
-+ platform_driver_unregister(&cns3xxx_wdt_driver);
-+}
-+
-+module_init(cns3xxx_wdt_init);
-+module_exit(cns3xxx_wdt_exit);
-+
-+MODULE_AUTHOR("Scott Shu");
-+MODULE_DESCRIPTION("CNS3XXX Watchdog Device Driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+MODULE_ALIAS("platform:cns3xxx-wdt");
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -231,6 +231,15 @@ config DAVINCI_WATCHDOG
- NOTE: once enabled, this timer cannot be disabled.
- Say N if you are unsure.
-
-+config CNS3XXX_WATCHDOG
-+ tristate "CNS3XXX watchdog"
-+ depends on ARCH_CNS3XXX && LOCAL_TIMERS
-+ help
-+ Watchdog timer embedded into the CNS3XXX SoCs system.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called cns3xxx_wdt.
-+
- config ORION_WATCHDOG
- tristate "Orion watchdog"
- depends on ARCH_ORION5X || ARCH_KIRKWOOD
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_
- obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
- obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
- obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
-+obj-$(CONFIG_CNS3XXX_WATCHDOG) += cns3xxx_wdt.o
- obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
- obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
- obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
+++ /dev/null
---- a/drivers/serial/8250.c
-+++ b/drivers/serial/8250.c
-@@ -1743,6 +1743,7 @@ static void serial8250_backup_timeout(un
- unsigned int iir, ier = 0, lsr;
- unsigned long flags;
-
-+ spin_lock_irqsave(&up->port.lock, flags);
- /*
- * Must disable interrupts or else we risk racing with the interrupt
- * based handler.
-@@ -1760,10 +1761,8 @@ static void serial8250_backup_timeout(un
- * the "Diva" UART used on the management processor on many HP
- * ia64 and parisc boxes.
- */
-- spin_lock_irqsave(&up->port.lock, flags);
- lsr = serial_in(up, UART_LSR);
- up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
-- spin_unlock_irqrestore(&up->port.lock, flags);
- if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
- (!uart_circ_empty(&up->port.info->xmit) || up->port.x_char) &&
- (lsr & UART_LSR_THRE)) {
-@@ -1771,12 +1770,14 @@ static void serial8250_backup_timeout(un
- iir |= UART_IIR_THRI;
- }
-
-- if (!(iir & UART_IIR_NO_INT))
-- serial8250_handle_port(up);
--
- if (is_real_interrupt(up->port.irq))
- serial_out(up, UART_IER, ier);
-
-+ spin_unlock_irqrestore(&up->port.lock, flags);
-+
-+ if (!(iir & UART_IIR_NO_INT))
-+ serial8250_handle_port(up);
-+
- /* Standard timer interval plus 0.2s to keep the port running */
- mod_timer(&up->timer,
- jiffies + poll_timeout(up->port.timeout) + HZ / 5);
+++ /dev/null
---- a/arch/arm/include/asm/dma-mapping.h
-+++ b/arch/arm/include/asm/dma-mapping.h
-@@ -350,7 +350,8 @@ static inline dma_addr_t dma_map_page(st
- static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
- size_t size, enum dma_data_direction dir)
- {
-- /* nothing to do */
-+ if (dir != DMA_TO_DEVICE)
-+ dma_cache_maint(dma_to_virt(dev, handle), size, DMA_FROM_DEVICE);
- }
- #endif /* CONFIG_DMABOUNCE */
-
-@@ -398,6 +399,8 @@ static inline void dma_sync_single_range
- {
- BUG_ON(!valid_dma_direction(dir));
-
-+ if (dir != DMA_TO_DEVICE)
-+ dma_cache_maint(dma_to_virt(dev, handle) + offset, size, DMA_FROM_DEVICE);
- dmabounce_sync_for_cpu(dev, handle, offset, size, dir);
- }
-
projects / openwrt.git / commitdiff