Fix Asus rt-n15 board support

* gpio leds and buttons
* ethernet

Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40494 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ramips/dts/RT-N15.dts b/target/linux/ramips/dts/RT-N15.dts
index 77e640f..8936520 100644 (file)
--- a/target/linux/ramips/dts/RT-N15.dts
+++ b/target/linux/ramips/dts/RT-N15.dts
@@ -9,18 +9,20 @@
        model = "Asus RT-N15";
 
        palmbus@300000 {
-               sysc@0 {
-                       ralink,pinmux = "uartlite";
-                       ralink,gpiomux = "i2c";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
                gpio0: gpio@600 {
                        status = "okay";
                };
        };
 
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "uartlite", "mdio";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
@@ -46,7 +48,7 @@
                        read-only;
                };
                partition@50000 {
-                       label = "linux";
+                       label = "firmware";
                        reg = <0x50000 0x3b0000>;
                };
        };
@@ -58,6 +60,14 @@
                 port@0 {
                        ralink,fixed-link = <1000 1 1 1>;
                };
+
+               mdio-bus {
+                       status = "okay";
+                       phy0: ethernet-phy@0 {
+                               phy-mode = "mii";
+                               reg = <0>;
+                       };
+               };
        };
 
        rtl8366s {