--- /dev/null
+--- /dev/null
++++ b/arch/arm/mach-kirkwood/nas6210-setup.c
+@@ -0,0 +1,189 @@
++/*
++ * arch/arm/mach-kirkwood/nas6210-setup.c
++ *
++ * Raidsonic ICYBOX NAS6210 Board Setup
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/ata_platform.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/gpio.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
++#include <linux/leds.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include "common.h"
++#include "mpp.h"
++
++#define NAS6210_GPIO_POWER_OFF 24
++
++static struct mtd_partition nas6210_nand_parts[] = {
++ {
++ .name = "uboot",
++ .offset = 0,
++ .size = SZ_512K
++ }, {
++ .name = "uboot_env",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = SZ_128K
++ }, {
++ .name = "kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 3 * SZ_1M
++ }, {
++ .name = "rootfs",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL
++ },
++};
++
++static struct mv643xx_eth_platform_data nas6210_ge00_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
++};
++
++static struct mv_sata_platform_data nas6210_sata_data = {
++ .n_ports = 2,
++};
++
++static struct gpio_led nas6210_led_pins[] = {
++ {
++ .name = "status:green:power",
++ .default_trigger = "default-on",
++ .gpio = 25,
++ .active_low = 0,
++ },
++ {
++ .name = "status:red:power",
++ .default_trigger = "none",
++ .gpio = 22,
++ .active_low = 0,
++ },
++ {
++ .name = "status:red:usb_copy",
++ .default_trigger = "none",
++ .gpio = 27,
++ .active_low = 0,
++ },
++};
++
++static struct gpio_led_platform_data nas6210_led_data = {
++ .leds = nas6210_led_pins,
++ .num_leds = ARRAY_SIZE(nas6210_led_pins),
++};
++
++static struct platform_device nas6210_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &nas6210_led_data,
++ }
++};
++
++static struct gpio_keys_button nas6210_buttons[] = {
++ {
++ .code = KEY_COPY,
++ .gpio = 29,
++ .desc = "USB Copy",
++ .active_low = 1,
++ },
++ {
++ .code = KEY_RESTART,
++ .gpio = 28,
++ .desc = "Reset",
++ .active_low = 1,
++ },
++};
++
++static struct gpio_keys_platform_data nas6210_button_data = {
++ .buttons = nas6210_buttons,
++ .nbuttons = ARRAY_SIZE(nas6210_buttons),
++};
++
++static struct platform_device nas6210_button_device = {
++ .name = "gpio-keys",
++ .id = -1,
++ .num_resources = 0,
++ .dev = {
++ .platform_data = &nas6210_button_data,
++ }
++};
++
++static unsigned int nas6210_mpp_config[] __initdata = {
++ MPP0_NF_IO2,
++ MPP1_NF_IO3,
++ MPP2_NF_IO4,
++ MPP3_NF_IO5,
++ MPP4_NF_IO6,
++ MPP5_NF_IO7,
++ MPP18_NF_IO0,
++ MPP19_NF_IO1,
++ MPP22_GPIO, /* Power LED red */
++ MPP24_GPIO, /* Power off device */
++ MPP25_GPIO, /* Power LED green */
++ MPP27_GPIO, /* USB transfer LED */
++ MPP28_GPIO, /* Reset button */
++ MPP29_GPIO, /* USB Copy button */
++ 0
++};
++
++static void nas6210_power_off(void)
++{
++ gpio_set_value(NAS6210_GPIO_POWER_OFF, 1);
++}
++
++static void __init nas6210_init(void)
++{
++ /*
++ * Basic setup. Needs to be called early.
++ */
++ kirkwood_init();
++ kirkwood_mpp_conf(nas6210_mpp_config);
++
++ kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25);
++ kirkwood_ehci_init();
++ kirkwood_ge00_init(&nas6210_ge00_data);
++ kirkwood_sata_init(&nas6210_sata_data);
++ kirkwood_uart0_init();
++ platform_device_register(&nas6210_leds);
++ platform_device_register(&nas6210_button_device);
++ if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 &&
++ gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0)
++ pm_power_off = nas6210_power_off;
++ else
++ pr_err("nas6210: failed to configure power-off GPIO\n");
++}
++
++static int __init nas6210_pci_init(void)
++{
++ if (machine_is_nas6210()) {
++ u32 dev, rev;
++
++ kirkwood_pcie_id(&dev, &rev);
++ if (dev == MV88F6282_DEV_ID)
++ kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
++ else
++ kirkwood_pcie_init(KW_PCIE0);
++ }
++
++ return 0;
++}
++subsys_initcall(nas6210_pci_init);
++
++MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS6210")
++ /* Maintainer: <gmbnomis at gmail dot com> */
++ .atag_offset = 0x100,
++ .init_machine = nas6210_init,
++ .map_io = kirkwood_map_io,
++ .init_early = kirkwood_init_early,
++ .init_irq = kirkwood_init_irq,
++ .timer = &kirkwood_timer,
++MACHINE_END
+--- a/arch/arm/mach-kirkwood/Kconfig
++++ b/arch/arm/mach-kirkwood/Kconfig
+@@ -136,6 +136,12 @@ config MACH_ICONNECT
+ Say 'Y' here if you want your kernel to support the
+ Iomega iConnect Wireless.
+
++config MACH_NAS6210
++ bool "RaidSonic ICY BOX IB-NAS6210"
++ help
++ Say 'Y' here if you want your kernel to support the
++ RaidSonic ICY BOX IB-NAS6210 device.
++
+ endmenu
+
+ endif
+--- a/arch/arm/mach-kirkwood/Makefile
++++ b/arch/arm/mach-kirkwood/Makefile
+@@ -19,5 +19,6 @@ obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2
+ obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
+ obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
+ obj-$(CONFIG_MACH_T5325) += t5325-setup.o
++obj-$(CONFIG_MACH_NAS6210) += nas6210-setup.o
+
+ obj-$(CONFIG_CPU_IDLE) += cpuidle.o
projects / openwrt.git / commitdiff