ar71xx: enable sysupgrade for the OpenMesh MR600

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34235 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh b/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
index d9a8bbb..ccce811 100644 (file)
--- a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
@@ -1,9 +1,9 @@
-# The U-Boot loader of the OM2P requires image sizes and checksums to be
-# provided in the U-Boot environment.
-# The OM2P comes with 2 main partitions - while one is active sysupgrade
-# will flash the other. The boot order is changed to boot the newly
-# flashed partition. If the new partition can't be booted due to upgrade
-# failures the previously used partition is loaded.
+# The U-Boot loader of the OpenMesh devices requires image sizes and
+# checksums to be provided in the U-Boot environment.
+# The OpenMesh devices come with 2 main partitions - while one is active
+# sysupgrade will flash the other. The boot order is changed to boot the
+# newly flashed partition. If the new partition can't be booted due to
+# upgrade failures the previously used partition is loaded.
 
 trim()
 {
@@ -34,7 +34,7 @@ platform_add_ramfs_ubootenv()
 }
 append sysupgrade_pre_upgrade platform_add_ramfs_ubootenv
 
-platform_check_image_om2p()
+platform_check_image_openmesh()
 {
        local img_magic=$1
        local img_path=$2
@@ -56,6 +56,16 @@ platform_check_image_om2p()
 
        case "$img_board_target" in
                OM2P)
+                       [ "$board" = "om2p" ] && break
+                       [ "$board" = "om2p-lc" ] && break
+                       [ "$board" = "om2p-hs" ] && break
+                       echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
+                       return 1
+                       ;;
+               MR600)
+                       [ "$board" = "mr600" ] && break
+                       echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
+                       return 1
                        ;;
                *)
                        echo "Invalid board target ($img_board_target). Use the correct image for this platform"
@@ -102,13 +112,14 @@ platform_check_image_om2p()
        return 0
 }
 
-platform_do_upgrade_om2p()
+platform_do_upgrade_openmesh()
 {
-       local img_path=$1
-       local kernel_start_addr= kernel_size= kernel_md5=
+       local img_path=$1 img_board_target=
+       local kernel_start_addr= kernel_start_addr1= kernel_start_addr2=
+       local kernel_size= kernel_md5=
        local rootfs_size= rootfs_checksize= rootfs_md5=
        local kernel_bsize= total_size=7340032
-       local data_offset=$((64 * 1024)) block_size=$((256 * 1024)) offset=
+       local data_offset=$((64 * 1024)) block_size= offset=
        local uboot_env_upgrade="/tmp/fw_env_upgrade"
        local cfg_size= kernel_size= rootfs_size=
        local append=""
@@ -119,8 +130,22 @@ platform_do_upgrade_om2p()
        kernel_size=$(dd if="$img_path" bs=2 skip=71 count=4 2>/dev/null)
        rootfs_size=$(dd if="$img_path" bs=2 skip=107 count=4 2>/dev/null)
 
+       img_board_target=$(trim $(dd if="$img_path" bs=4 skip=1 count=8 2>/dev/null))
        cfg_content=$(dd if="$img_path" bs=1 skip=$data_offset count=$(echo $((0x$cfg_size))) 2>/dev/null)
 
+       case $img_board_target in
+               OM2P)
+                       block_size=$((256 * 1024))
+                       kernel_start_addr1=0x9f1c0000
+                       kernel_start_addr2=0x9f8c0000
+                       ;;
+               MR600)
+                       block_size=$((64 * 1024))
+                       kernel_start_addr1=0x9f0b0000
+                       kernel_start_addr2=0x9f850000
+                       ;;
+       esac
+
        kernel_md5=$(cfg_value_get "$cfg_content" "vmlinux" "md5sum")
        rootfs_md5=$(cfg_value_get "$cfg_content" "rootfs" "md5sum")
        rootfs_checksize=$(cfg_value_get "$cfg_content" "rootfs" "checksize")
@@ -147,12 +172,12 @@ platform_do_upgrade_om2p()
                        printf "kernel_size_1 %u\n" $(($kernel_bsize / 1024)) >> $uboot_env_upgrade
                        printf "rootfs_size_1 %u\n" $((($total_size - $kernel_bsize) / 1024)) >> $uboot_env_upgrade
                        printf "bootseq 1,2\n" >> $uboot_env_upgrade
-                       kernel_start_addr=0x9f1c0000
+                       kernel_start_addr=$kernel_start_addr1
                else
                        printf "kernel_size_2 %u\n" $(($kernel_bsize / 1024)) >> $uboot_env_upgrade
                        printf "rootfs_size_2 %u\n" $((($total_size - $kernel_bsize) / 1024)) >> $uboot_env_upgrade
                        printf "bootseq 2,1\n" >> $uboot_env_upgrade
-                       kernel_start_addr=0x9f8c0000
+                       kernel_start_addr=$kernel_start_addr2
        fi
 
        printf "vmlinux_start_addr %s\n" $kernel_start_addr >> $uboot_env_upgrade

diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 2662afd..49b1de9 100755 (executable)
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -140,10 +140,11 @@ platform_check_image() {
                dir825b_check_image "$1" && return 0
                ;;
 
+       mr600 | \
        om2p | \
        om2p-hs | \
        om2p-lc)
-               platform_check_image_om2p "$magic_long" "$1" && return 0
+               platform_check_image_openmesh "$magic_long" "$1" && return 0
                return 1
                ;;
        tl-mr11u | \
@@ -269,10 +270,11 @@ platform_do_upgrade() {
        tew-673gru)
                platform_do_upgrade_dir825b "$ARGV"
                ;;
+       mr600 | \
        om2p | \
        om2p-hs | \
        om2p-lc)
-               platform_do_upgrade_om2p "$ARGV"
+               platform_do_upgrade_openmesh "$ARGV"
                ;;
        *)
                default_do_upgrade "$ARGV"