--- /dev/null
+/*
+ * diag.c - GPIO interface driver for Broadcom boards
+ *
+ * Copyright (C) 2006 Mike Baker <mbm@openwrt.org>,
+ * Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * $Id:$
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kmod.h>
+#include <linux/proc_fs.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <asm/uaccess.h>
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+#include <linux/kobject.h>
+#include <linux/workqueue.h>
+#define hotplug_path uevent_helper
+#else
+#include <linux/tqueue.h>
+#define INIT_WORK INIT_TQUEUE
+#define schedule_work schedule_task
+#define work_struct tq_struct
+#define sbh bcm947xx_sbh
+#define sbh_lock bcm947xx_sbh_lock
+#endif
+
+#include <typedefs.h>
+#include <osl.h>
+#include <bcmdevs.h>
+#include <sbutils.h>
+#include <sbconfig.h>
+#include <sbchipc.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+#include <sbmips.h>
+#else
+#include <hndcpu.h>
+#endif
+
+#define MODULE_NAME "diag"
+
+#define MAX_GPIO 8
+#define FLASH_TIME HZ/6
+
+#define EXTIF_ADDR 0x1f000000
+#define EXTIF_UART (EXTIF_ADDR + 0x00800000)
+
+/* For LEDs */
+#define GPIO_TYPE_NORMAL (0x0 << 24)
+#define GPIO_TYPE_EXTIF (0x1 << 24)
+#define GPIO_TYPE_MASK (0xf << 24)
+
+static unsigned int gpiomask = 0;
+module_param(gpiomask, int, 0644);
+
+enum polarity_t {
+ REVERSE = 0,
+ NORMAL = 1,
+};
+
+enum {
+ PROC_BUTTON,
+ PROC_LED,
+ PROC_MODEL,
+ PROC_GPIOMASK
+};
+
+struct prochandler_t {
+ int type;
+ void *ptr;
+};
+
+struct button_t {
+ struct prochandler_t proc;
+ char *name;
+ u16 gpio;
+ u8 polarity;
+ u8 pressed;
+ unsigned long seen;
+};
+
+struct led_t {
+ struct prochandler_t proc;
+ char *name;
+ u32 gpio;
+ u8 polarity;
+ u8 flash;
+ u8 state;
+};
+
+struct platform_t {
+ char *name;
+ struct button_t buttons[MAX_GPIO];
+ struct led_t leds[MAX_GPIO];
+};
+
+enum {
+ /* Linksys */
+ WAP54GV1,
+ WAP54GV3,
+ WRT54GV1,
+ WRT54G,
+ WRTSL54GS,
+ WRT54G3G,
+
+ /* ASUS */
+ WLHDD,
+ WL300G,
+ WL500G,
+ WL500GD,
+ WL500GP,
+ ASUS_4702,
+
+ /* Buffalo */
+ WBR2_G54,
+ WHR_G54S,
+ WHR_HP_G54,
+ WHR2_A54G54,
+ WLA2_G54L,
+ BUFFALO_UNKNOWN,
+ BUFFALO_UNKNOWN_4710,
+
+ /* Siemens */
+ SE505V1,
+ SE505V2,
+
+ /* US Robotics */
+ USR5461,
+
+ /* Dell */
+ TM2300,
+
+ /* Motorola */
+ WE800G,
+ WR850GV1,
+ WR850GV2,
+
+ /* Belkin */
+ BELKIN_UNKNOWN,
+};
+
+static struct platform_t platforms[] = {
+ /* Linksys */
+ [WAP54GV1] = {
+ .name = "Linksys WAP54G V1",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 3 },
+ { .name = "wlan", .gpio = 1 << 4 },
+ },
+ },
+ [WAP54GV3] = {
+ .name = "Linksys WAP54G V3",
+ .buttons = {
+ /* FIXME: verify this */
+ { .name = "reset", .gpio = 1 << 7 },
+ { .name = "ses", .gpio = 1 << 0 },
+ },
+ .leds = {
+ /* FIXME: diag? */
+ { .name = "ses", .gpio = 1 << 1 },
+ },
+ },
+ [WRT54GV1] = {
+ .name = "Linksys WRT54G V1.x",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 0x13 | GPIO_TYPE_EXTIF, .polarity = NORMAL },
+ { .name = "dmz", .gpio = 0x12 | GPIO_TYPE_EXTIF, .polarity = NORMAL },
+ },
+ },
+ [WRT54G] = {
+ .name = "Linksys WRT54G*",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "dmz", .gpio = 1 << 7, .polarity = REVERSE },
+ { .name = "ses_white", .gpio = 1 << 2, .polarity = REVERSE },
+ { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE },
+ },
+ },
+ [WRTSL54GS] = {
+ .name = "Linksys WRTSL54GS",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "ses", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "dmz", .gpio = 1 << 7, .polarity = REVERSE },
+ { .name = "ses_white", .gpio = 1 << 5, .polarity = REVERSE },
+ { .name = "ses_orange", .gpio = 1 << 7, .polarity = REVERSE },
+ },
+ },
+ [WRT54G3G] = {
+ .name = "Linksys WRT54G3G",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "3g", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "dmz", .gpio = 1 << 7, .polarity = REVERSE },
+ { .name = "3g_green", .gpio = 1 << 2, .polarity = NORMAL },
+ { .name = "3g_blue", .gpio = 1 << 3, .polarity = NORMAL },
+ { .name = "3g_blink", .gpio = 1 << 5, .polarity = NORMAL },
+ },
+ },
+ /* Asus */
+ [WLHDD] = {
+ .name = "ASUS WL-HDD",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
+ },
+ },
+ [WL300G] = {
+ .name = "ASUS WL-500g",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
+ },
+ },
+ [WL500G] = {
+ .name = "ASUS WL-500g",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
+ },
+ },
+ [WL500GD] = {
+ .name = "ASUS WL-500g Deluxe",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
+ },
+ },
+ [WL500GP] = {
+ .name = "ASUS WL-500g Premium",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 0 },
+ { .name = "ses", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ [ASUS_4702] = {
+ .name = "ASUS (unknown, BCM4702)",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
+ },
+ },
+ /* Buffalo */
+ [WHR_G54S] = {
+ .name = "Buffalo WHR-G54S",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 4 },
+ { .name = "ses", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE },
+ { .name = "internal", .gpio = 1 << 3, .polarity = REVERSE },
+ { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE },
+ },
+ },
+ [WBR2_G54] = {
+ .name = "Buffalo WBR2-G54",
+ /* FIXME: verify */
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 7 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ [WHR_HP_G54] = {
+ .name = "Buffalo WHR-HP-G54",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 4 },
+ { .name = "bridge", .gpio = 1 << 5 },
+ { .name = "ses", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
+ { .name = "bridge", .gpio = 1 << 1, .polarity = REVERSE },
+ { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE },
+ },
+ },
+ [WHR2_A54G54] = {
+ .name = "Buffalo WHR2-A54G54",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
+ },
+ },
+ [WLA2_G54L] = {
+ .name = "Buffalo WLA2-G54L",
+ /* FIXME: verify */
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 7 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ [BUFFALO_UNKNOWN] = {
+ .name = "Buffalo (unknown)",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 7 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ [BUFFALO_UNKNOWN_4710] = {
+ .name = "Buffalo (unknown, BCM4710)",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 4 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ /* Siemens */
+ [SE505V1] = {
+ .name = "Siemens SE505 V1",
+ .buttons = {
+ /* No usable buttons */
+ },
+ .leds = {
+ { .name = "dmz", .gpio = 1 << 4, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 3, .polarity = REVERSE },
+ },
+ },
+ [SE505V2] = {
+ .name = "Siemens SE505 V2",
+ .buttons = {
+ /* No usable buttons */
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 5, .polarity = REVERSE },
+ { .name = "dmz", .gpio = 1 << 0, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 3, .polarity = REVERSE },
+ },
+ },
+ /* US Robotics */
+ [USR5461] = {
+ .name = "U.S. Robotics USR5461",
+ .buttons = {
+ /* No usable buttons */
+ },
+ .leds = {
+ { .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE },
+ { .name = "printer", .gpio = 1 << 1, .polarity = REVERSE },
+ },
+ },
+ /* Dell */
+ [TM2300] = {
+ .name = "Dell TrueMobile 2300",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
+ },
+ },
+ /* Motorola */
+ [WE800G] = {
+ .name = "Motorola WE800G",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 4, .polarity = NORMAL },
+ { .name = "diag", .gpio = 1 << 2, .polarity = REVERSE },
+ { .name = "wlan_amber", .gpio = 1 << 1, .polarity = NORMAL },
+ },
+ },
+ [WR850GV1] = {
+ .name = "Motorola WR850G V1",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 0 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 4, .polarity = NORMAL },
+ { .name = "diag", .gpio = 1 << 3, .polarity = REVERSE },
+ { .name = "modem", .gpio = 1 << 6, .polarity = NORMAL },
+ { .name = "wlan_red", .gpio = 1 << 5, .polarity = REVERSE },
+ { .name = "wlan_green", .gpio = 1 << 7, .polarity = REVERSE },
+ },
+ },
+ [WR850GV2] = {
+ .name = "Motorola WR850G V2",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 5 },
+ },
+ .leds = {
+ { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE },
+ { .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL },
+ { .name = "modem_green",.gpio = 1 << 6, .polarity = REVERSE },
+ { .name = "modem_red", .gpio = 1 << 7, .polarity = REVERSE },
+ },
+ },
+ /* Belkin */
+ [BELKIN_UNKNOWN] = {
+ .name = "Belkin (unknown)",
+ /* FIXME: verify & add detection */
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 7 },
+ },
+ .leds = {
+ { .name = "power", .gpio = 1 << 5, .polarity = NORMAL },
+ { .name = "wlan", .gpio = 1 << 3, .polarity = NORMAL },
+ { .name = "connected", .gpio = 1 << 0, .polarity = NORMAL },
+ },
+ },
+};
+
+extern void *sbh;
+extern spinlock_t sbh_lock;
+extern char *nvram_get(char *str);
+
+static struct proc_dir_entry *diag, *leds;
+static struct platform_t platform;
+static void led_flash(unsigned long dummy);
+
+#define getvar(str) (nvram_get(str)?:"")
+
+static void set_led_extif(struct led_t *led)
+{
+ volatile u8 *addr = (volatile u8 *) KSEG1ADDR(EXTIF_UART) + (led->gpio & ~GPIO_TYPE_MASK);
+ if (led->state)
+ *addr = 0xFF;
+ else
+ *addr;
+}
+
+static struct platform_t __init *platform_detect(void)
+{
+ char *boardnum, *boardtype, *buf;
+
+ boardnum = getvar("boardnum");
+ boardtype = getvar("boardtype");
+ if (strncmp(getvar("pmon_ver"), "CFE", 3) == 0) {
+ /* CFE based - newer hardware */
+ if (!strcmp(boardnum, "42")) { /* Linksys */
+ if (!strcmp(boardtype, "0x0101"))
+ return &platforms[WRT54G3G];
+
+ if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1"))
+ return &platforms[WRTSL54GS];
+
+ /* default to WRT54G */
+ return &platforms[WRT54G];
+ }
+
+ if (!strcmp(boardnum, "45")) { /* ASUS */
+ if (!strcmp(boardtype,"0x042f"))
+ return &platforms[WL500GP];
+ else
+ return &platforms[WL500GD];
+ }
+
+ if (!strcmp(boardnum, "10496"))
+ return &platforms[USR5461];
+ } else { /* PMON based - old stuff */
+ if (!strncmp(boardtype, "bcm94710dev", 11)) {
+ if (!strcmp(boardnum, "42"))
+ return &platforms[WRT54GV1];
+ if (simple_strtoul(boardnum, NULL, 9) == 2)
+ return &platforms[WAP54GV1];
+ }
+ if (!strncmp(getvar("hardware_version"), "WL500-", 6))
+ return &platforms[WL500G];
+ if (!strncmp(getvar("hardware_version"), "WL300-", 6)) {
+ /* Either WL-300g or WL-HDD, do more extensive checks */
+ if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) &&
+ (simple_strtoul(getvar("et1phyaddr"), NULL, 9) == 1))
+ return &platforms[WLHDD];
+ if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) &&
+ (simple_strtoul(getvar("et1phyaddr"), NULL, 9) == 10))
+ return &platforms[WL300G];
+ }
+
+ /* unknown asus stuff, probably bcm4702 */
+ if (!strncmp(boardnum, "asusX", 5))
+ return &platforms[ASUS_4702];
+
+ if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
+ (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {
+ if (!strncmp(getvar("ModelId"),"WE800G", 6))
+ return &platforms[WE800G];
+ else
+ return &platforms[WR850GV1];
+ }
+ }
+
+ if ((buf = (nvram_get("melco_id") ?: nvram_get("buffalo_id")))) {
+ /* Buffalo hardware, check id for specific hardware matches */
+ if (!strcmp(buf, "29bb0332"))
+ return &platforms[WBR2_G54];
+ if (!strcmp(buf, "29129"))
+ return &platforms[WLA2_G54L];
+ if (!strcmp(buf, "30189"))
+ return &platforms[WHR_HP_G54];
+ if (!strcmp(buf, "30182"))
+ return &platforms[WHR_G54S];
+ if (!strcmp(buf, "290441dd"))
+ return &platforms[WHR2_A54G54];
+ }
+
+ if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */
+ if (!strncmp(boardtype, "bcm94710ap", 10))
+ return &platforms[BUFFALO_UNKNOWN_4710];
+ else
+ return &platforms[BUFFALO_UNKNOWN];
+ }
+
+ if (!strcmp(getvar("CFEver"), "MotoWRv203"))
+ return &platforms[WR850GV2];
+
+ /* not found */
+ return NULL;
+}
+
+static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos);
+static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, void *data);
+static struct file_operations diag_proc_fops = {
+ read: diag_proc_read,
+ write: diag_proc_write
+};
+
+
+
+static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos)
+{
+#ifdef LINUX_2_4
+ struct inode *inode = file->f_dentry->d_inode;
+ struct proc_dir_entry *dent = inode->u.generic_ip;
+#else
+ struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
+#endif
+ char *page;
+ int len = 0;
+
+ if ((page = kmalloc(1024, GFP_KERNEL)) == NULL)
+ return -ENOBUFS;
+
+ if (dent->data != NULL) {
+ struct prochandler_t *handler = (struct prochandler_t *) dent->data;
+ switch (handler->type) {
+ case PROC_LED: {
+ struct led_t * led = (struct led_t *) handler->ptr;
+ if (led->flash) {
+ len = sprintf(page, "f\n");
+ } else {
+ if (led->gpio & GPIO_TYPE_EXTIF) {
+ len = sprintf(page, "%d\n", led->state);
+ } else {
+ int in = (sb_gpioin(sbh) & led->gpio ? 1 : 0);
+ int p = (led->polarity == NORMAL ? 0 : 1);
+ len = sprintf(page, "%d\n", ((in ^ p) ? 1 : 0));
+ }
+ }
+ break;
+ }
+ case PROC_MODEL:
+ len = sprintf(page, "%s\n", platform.name);
+ break;
+ case PROC_GPIOMASK:
+ len = sprintf(page, "%d\n", gpiomask);
+ break;
+ }
+ }
+ len += 1;
+
+ if (*ppos < len) {
+ len = min_t(int, len - *ppos, count);
+ if (copy_to_user(buf, (page + *ppos), len)) {
+ kfree(page);
+ return -EFAULT;
+ }
+ *ppos += len;
+ } else {
+ len = 0;
+ }
+
+ return len;
+}
+
+
+static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, void *data)
+{
+#ifdef LINUX_2_4
+ struct inode *inode = file->f_dentry->d_inode;
+ struct proc_dir_entry *dent = inode->u.generic_ip;
+#else
+ struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
+#endif
+ char *page;
+ int ret = -EINVAL;
+
+ if ((page = kmalloc(count + 1, GFP_KERNEL)) == NULL)
+ return -ENOBUFS;
+
+ if (copy_from_user(page, buf, count)) {
+ kfree(page);
+ return -EINVAL;
+ }
+ page[count] = 0;
+
+ if (dent->data != NULL) {
+ struct prochandler_t *handler = (struct prochandler_t *) dent->data;
+ switch (handler->type) {
+ case PROC_LED: {
+ struct led_t *led = (struct led_t *) handler->ptr;
+ int p = (led->polarity == NORMAL ? 0 : 1);
+
+ if (!(led->gpio & GPIO_TYPE_EXTIF) && (led->gpio & gpiomask))
+ break;
+
+ if (page[0] == 'f') {
+ led->flash = 1;
+ led_flash(0);
+ } else {
+ led->flash = 0;
+ if (led->gpio & GPIO_TYPE_EXTIF) {
+ led->state = p ^ ((page[0] == '1') ? 1 : 0);
+ set_led_extif(led);
+ } else {
+ sb_gpioouten(sbh, led->gpio, led->gpio, GPIO_DRV_PRIORITY);
+ sb_gpiocontrol(sbh, led->gpio, 0, GPIO_DRV_PRIORITY);
+ sb_gpioout(sbh, led->gpio, ((p ^ (page[0] == '1')) ? led->gpio : 0), GPIO_DRV_PRIORITY);
+ }
+ }
+ break;
+ }
+ case PROC_GPIOMASK:
+ gpiomask = simple_strtoul(page, NULL, 16);
+ break;
+ }
+ ret = count;
+ }
+
+ kfree(page);
+ return ret;
+}
+
+struct event_t {
+ struct work_struct tq;
+ char buf[256];
+ char *argv[3];
+ char *envp[6];
+};
+
+static void hotplug_button(struct event_t *event)
+{
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ call_usermodehelper (event->argv[0], event->argv, event->envp, 1);
+#else
+ call_usermodehelper (event->argv[0], event->argv, event->envp);
+#endif
+ kfree(event);
+}
+
+static void set_irqenable(int enabled)
+{
+ unsigned int coreidx;
+ unsigned long flags;
+ chipcregs_t *cc;
+
+ spin_lock_irqsave(sbh_lock, flags);
+ coreidx = sb_coreidx(sbh);
+ if ((cc = sb_setcore(sbh, SB_CC, 0))) {
+ int intmask;
+
+ intmask = readl(&cc->intmask);
+ if (enabled)
+ intmask |= CI_GPIO;
+ else
+ intmask &= ~CI_GPIO;
+ writel(intmask, &cc->intmask);
+ }
+ sb_setcoreidx(sbh, coreidx);
+ spin_unlock_irqrestore(sbh_lock, flags);
+}
+
+
+static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct button_t *b;
+ int in = sb_gpioin(sbh);
+ struct event_t *event;
+
+ set_irqenable(0);
+ for (b = platform.buttons; b->name; b++) {
+ if (b->gpio & gpiomask)
+ continue;
+
+ if (b->polarity != (in & b->gpio)) {
+ b->pressed ^= 1;
+
+ if ((event = (struct event_t *)kmalloc (sizeof(struct event_t), GFP_ATOMIC))) {
+ int i;
+ char *scratch = event->buf;
+
+ i = 0;
+ event->argv[i++] = hotplug_path;
+ event->argv[i++] = "button";
+ event->argv[i] = 0;
+
+ i = 0;
+ event->envp[i++] = "HOME=/";
+ event->envp[i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
+ event->envp[i++] = scratch;
+ scratch += sprintf (scratch, "ACTION=%s", b->pressed?"pressed":"released") + 1;
+ event->envp[i++] = scratch;
+ scratch += sprintf (scratch, "BUTTON=%s", b->name) + 1;
+ event->envp[i++] = scratch;
+ scratch += sprintf (scratch, "SEEN=%ld", (jiffies - b->seen)/HZ) + 1;
+ event->envp[i] = 0;
+
+ INIT_WORK(&event->tq, (void *)(void *)hotplug_button, (void *)event);
+ schedule_work(&event->tq);
+ }
+
+ b->seen = jiffies;
+ b->polarity ^= b->gpio;
+ sb_gpiointpolarity(sbh, b->gpio, b->polarity, GPIO_DRV_PRIORITY);
+ }
+ }
+ set_irqenable(1);
+ return IRQ_HANDLED;
+}
+
+static struct timer_list led_timer = {
+ function: &led_flash
+};
+
+static void led_flash(unsigned long dummy) {
+ struct led_t *l;
+ unsigned mask = 0;
+ unsigned extif_blink = 0;
+
+ for (l = platform.leds; l->name; l++) {
+ if (l->flash) {
+ if (l->gpio & GPIO_TYPE_EXTIF) {
+ extif_blink = 1;
+ l->state = !l->state;
+ set_led_extif(l);
+ } else {
+ mask |= l->gpio;
+ }
+ }
+ }
+
+ mask &= ~gpiomask;
+ if (mask) {
+ unsigned val;
+
+ val = ~sb_gpioin(sbh);
+ val &= mask;
+
+ sb_gpioouten(sbh, mask, mask, GPIO_DRV_PRIORITY);
+ sb_gpiocontrol(sbh, mask, 0, GPIO_DRV_PRIORITY);
+ sb_gpioout(sbh, mask, val, GPIO_DRV_PRIORITY);
+ }
+ if (mask || extif_blink) {
+ mod_timer(&led_timer, jiffies + FLASH_TIME);
+ }
+}
+
+static void __init register_buttons(struct button_t *b)
+{
+ int irq = sb_irq(sbh) + 2;
+
+ request_irq(irq, button_handler, SA_SHIRQ | SA_SAMPLE_RANDOM, "gpio", button_handler);
+
+ for (; b->name; b++) {
+ if (b->gpio & gpiomask)
+ continue;
+
+ sb_gpioouten(sbh, b->gpio,0, GPIO_DRV_PRIORITY);
+ sb_gpiocontrol(sbh, b->gpio,0, GPIO_DRV_PRIORITY);
+ b->polarity = sb_gpioin(sbh) & b->gpio;
+ sb_gpiointpolarity(sbh, b->gpio, b->polarity, GPIO_DRV_PRIORITY);
+ sb_gpiointmask(sbh, b->gpio, b->gpio, GPIO_DRV_PRIORITY);
+ }
+ set_irqenable(1);
+}
+
+static void __exit unregister_buttons(struct button_t *b)
+{
+ int irq = sb_irq(sbh) + 2;
+
+ for (; b->name; b++)
+ sb_gpiointmask(sbh, b->gpio, 0, GPIO_DRV_PRIORITY);
+
+ free_irq(irq, button_handler);
+}
+
+static void __init register_leds(struct led_t *l)
+{
+ struct proc_dir_entry *p;
+
+ leds = proc_mkdir("led", diag);
+ if (!leds)
+ return;
+
+ for(; l->name; l++) {
+ if (l->gpio & gpiomask)
+ continue;
+
+ if (l->gpio & GPIO_TYPE_EXTIF) {
+ l->state = 0;
+ set_led_extif(l);
+ } else {
+ sb_gpioouten(sbh, l->gpio, l->gpio, GPIO_DRV_PRIORITY);
+ sb_gpiocontrol(sbh, l->gpio, 0, GPIO_DRV_PRIORITY);
+ sb_gpioout(sbh, l->gpio, (l->polarity == NORMAL)?0:l->gpio, GPIO_DRV_PRIORITY);
+ }
+
+ if ((p = create_proc_entry(l->name, S_IRUSR, leds))) {
+ l->proc.type = PROC_LED;
+ l->proc.ptr = l;
+ p->data = (void *) &l->proc;
+ p->proc_fops = &diag_proc_fops;
+ }
+ }
+}
+
+static void __exit unregister_leds(struct led_t *l)
+{
+ for(; l->name; l++)
+ remove_proc_entry(l->name, leds);
+
+ remove_proc_entry("led", diag);
+}
+
+static void __exit diag_exit(void)
+{
+
+ del_timer(&led_timer);
+
+ if (platform.buttons)
+ unregister_buttons(platform.buttons);
+
+ if (platform.leds)
+ unregister_leds(platform.leds);
+
+ remove_proc_entry("model", diag);
+ remove_proc_entry("gpiomask", diag);
+ remove_proc_entry("diag", NULL);
+}
+
+static struct prochandler_t proc_model = { .type = PROC_MODEL };
+static struct prochandler_t proc_gpiomask = { .type = PROC_GPIOMASK };
+
+static int __init diag_init(void)
+{
+ static struct proc_dir_entry *p;
+ static struct platform_t *detected;
+
+ detected = platform_detect();
+ if (!detected) {
+ printk(MODULE_NAME ": Router model not detected.\n");
+ return -ENODEV;
+ }
+ memcpy(&platform, detected, sizeof(struct platform_t));
+
+ printk(MODULE_NAME ": Detected '%s'\n", platform.name);
+
+ if (!(diag = proc_mkdir("diag", NULL))) {
+ printk(MODULE_NAME ": proc_mkdir on /proc/diag failed\n");
+ return -EINVAL;
+ }
+
+ if ((p = create_proc_entry("model", S_IRUSR, diag))) {
+ p->data = (void *) &proc_model;
+ p->proc_fops = &diag_proc_fops;
+ }
+
+ if ((p = create_proc_entry("gpiomask", S_IRUSR | S_IWUSR, diag))) {
+ p->data = (void *) &proc_gpiomask;
+ p->proc_fops = &diag_proc_fops;
+ }
+
+ if (platform.buttons)
+ register_buttons(platform.buttons);
+
+ if (platform.leds)
+ register_leds(platform.leds);
+
+ return 0;
+}
+
+module_init(diag_init);
+module_exit(diag_exit);
+
+MODULE_AUTHOR("Mike Baker, Felix Fietkau / OpenWrt.org");
+MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * diag_led.c - replacement diag module
- *
- * Copyright (C) 2004 Mike Baker,
- * Imre Kaloz <kaloz@dune.hu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * $Id$
- */
-
-/*
- * ChangeLog:
- * 2004/03/28 initial release
- * 2004/08/26 asus & buffalo support added
- * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added
- * 2005/04/13 added licensing informations
- * 2005/04/18 base reset polarity off initial readings
- * 2006/02/07 motorola wa840g/we800g support added
- * 2006/08/18 asus power led support added
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sysctl.h>
-#include <asm/io.h>
-#include <typedefs.h>
-#include <osl.h>
-#include <bcmdevs.h>
-#include <sbutils.h>
-
-extern char * nvram_get(const char *name);
-static void *sbh;
-
-// v2.x - - - - -
-#define DIAG_GPIO (1<<1)
-#define DMZ_GPIO (1<<7)
-
-static void set_gpio(uint32 mask, uint32 value) {
- sb_gpiocontrol(sbh,mask, 0, GPIO_DRV_PRIORITY);
- sb_gpioouten(sbh,mask,mask,GPIO_DRV_PRIORITY);
- sb_gpioout(sbh,mask,value,GPIO_DRV_PRIORITY);
-}
-
-static void v2_set_diag(u8 state) {
- set_gpio(DIAG_GPIO,state);
-}
-static void v2_set_dmz(u8 state) {
- set_gpio(DMZ_GPIO,state);
-}
-
-// asus wl-500g (+deluxe)
-#define ASUS_PWR_GPIO (1<<0)
-
-static void asus_set_pwr(u8 state) {
- set_gpio(ASUS_PWR_GPIO,state);
-}
-
-// v1.x - - - - -
-#define LED_DIAG 0x13
-#define LED_DMZ 0x12
-
-static void v1_set_diag(u8 state) {
- if (!state) {
- *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF;
- } else {
- *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG);
- }
-}
-static void v1_set_dmz(u8 state) {
- if (!state) {
- *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF;
- } else {
- *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ);
- }
-}
-
-static void wap1_set_diag(u8 state) {
- set_gpio(1<<3,state);
-}
-static void wap1_set_dmz(u8 state) {
- set_gpio(1<<4,state);
-}
-
-// - - - - -
-static void ignore(u8 ignored) {};
-
-// - - - - -
-#define BIT_DMZ 0x01
-#define BIT_PWR 0x02
-#define BIT_DIAG 0x04
-
-void (*set_diag)(u8 state);
-void (*set_dmz)(u8 state);
-void (*set_pwr)(u8 state);
-
-static unsigned int diag = 0x02; // default: diag off, pwr on, dmz off
-
-static void diag_change(void)
-{
- set_diag(0xFF); // off
- set_dmz(0xFF); // off
- set_pwr(0xFF); // off
-
- if(diag & BIT_DIAG)
- set_diag(0x00); // on
- if(diag & BIT_DMZ)
- set_dmz(0x00); // on
- if (diag & BIT_PWR)
- set_pwr(0x00); //on
-}
-
-static int proc_diag(ctl_table *table, int write, struct file *filp,
- void *buffer, size_t *lenp)
-{
- int r;
- r = proc_dointvec(table, write, filp, buffer, lenp);
- if (write && !r) {
- diag_change();
- }
- return r;
-}
-
-// - - - - -
-static unsigned char reset_gpio = 0;
-static unsigned char reset_polarity = 0;
-static unsigned int reset = 0;
-
-static int proc_reset(ctl_table *table, int write, struct file *filp,
- void *buffer, size_t *lenp)
-{
-
- if (reset_gpio) {
- sb_gpiocontrol(sbh,reset_gpio,reset_gpio,GPIO_DRV_PRIORITY);
- sb_gpioouten(sbh,reset_gpio,0,GPIO_DRV_PRIORITY);
- reset=!(sb_gpioin(sbh)&reset_gpio);
-
- if (reset_polarity) reset=!reset;
- } else {
- reset=0;
- }
-
- return proc_dointvec(table, write, filp, buffer, lenp);
-}
-
-// - - - - -
-static struct ctl_table_header *diag_sysctl_header;
-
-static ctl_table sys_diag[] = {
- {
- ctl_name: 2000,
- procname: "diag",
- data: &diag,
- maxlen: sizeof(diag),
- mode: 0644,
- proc_handler: proc_diag
- },
- {
- ctl_name: 2001,
- procname: "reset",
- data: &reset,
- maxlen: sizeof(reset),
- mode: 0444,
- proc_handler: proc_reset
- },
- { 0 }
-};
-
-static int __init diag_init(void)
-{
- char *buf;
- u32 board_type;
- sbh = (void *)sb_kattach();
- sb_gpiosetcore(sbh);
-
- board_type = sb_boardtype(sbh);
- printk(KERN_INFO "diag boardtype: %08x\n",board_type);
-
- set_diag=ignore;
- set_dmz=ignore;
- set_pwr=ignore;
-
- buf=nvram_get("pmon_ver") ?: "";
- if (((board_type & 0xf00) == 0x400) && (strncmp(buf, "CFE", 3) != 0)) {
- buf=nvram_get("boardtype")?:"";
- if (!strncmp(buf,"bcm94710dev",11)) {
- buf=nvram_get("boardnum")?:"";
- if (!strcmp(buf,"42")) {
- // wrt54g v1.x
- set_diag=v1_set_diag;
- set_dmz=v1_set_dmz;
- reset_gpio=(1<<6);
- }
- if (simple_strtoul(buf, NULL, 0) == 2) {
- // wap54g v1.0
- // do not use strcmp as PMON v5.3.22 has some built-in nvram
- // defaults with trailing \r
- set_diag=wap1_set_diag;
- // no dmz led on wap54g, used green led
- // labeled "WLAN Link" instead
- set_dmz=wap1_set_dmz;
- reset_gpio=(1<<0);
- }
- if (!strcmp(buf,"asusX")) {
- //asus wl-500g
- set_pwr=asus_set_pwr;
- reset_gpio=(1<<6);
- }
- if (!strcmp(buf,"2")) {
- //wa840g v1 / we800g v1
- reset_gpio=(1<<0);
- }
- }
- if (!strcmp(buf,"bcm94710ap")) {
- buf=nvram_get("boardnum")?:"";
- if (!strcmp(buf,"42")) {
- // buffalo
- set_dmz=v2_set_dmz;
- reset_gpio=(1<<4);
- }
- if (!strcmp(buf,"44")) {
- //dell truemobile
- set_dmz=v2_set_dmz;
- reset_gpio=(1<<0);
- }
- }
- } else {
- buf=nvram_get("boardnum")?:"";
- if (!strcmp(buf,"42")) {
- //linksys
- set_diag=v2_set_diag;
- set_dmz=v2_set_dmz;
- reset_gpio=(1<<6);
- }
- if (!strcmp(buf,"44")) {
- //motorola
- reset_gpio=(1<<5);
- }
- if (!strcmp(buf,"00")) {
- //buffalo
- reset_gpio=(1<<7);
- }
- if (!strcmp(buf,"45")) {
- //wl-500g deluxe
- set_pwr=asus_set_pwr;
- reset_gpio=(1<<6);
- }
- }
-
-
- sb_gpiocontrol(sbh,reset_gpio,reset_gpio,GPIO_DRV_PRIORITY);
- sb_gpioouten(sbh,reset_gpio,0,GPIO_DRV_PRIORITY);
- reset_polarity=!(sb_gpioin(sbh)&reset_gpio);
-
- diag_sysctl_header = register_sysctl_table(sys_diag, 0);
- diag_change();
-
- return 0;
-}
-
-static void __exit diag_exit(void)
-{
- unregister_sysctl_table(diag_sysctl_header);
-}
-
-EXPORT_NO_SYMBOLS;
-MODULE_AUTHOR("openwrt.org");
-MODULE_LICENSE("GPL");
-
-module_init(diag_init);
-module_exit(diag_exit);
diff -urN linux.old/arch/mips/bcm947xx/broadcom/bcmsrom.c linux.dev/arch/mips/bcm947xx/broadcom/bcmsrom.c
--- linux.old/arch/mips/bcm947xx/broadcom/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/bcmsrom.c 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/bcmsrom.c 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,481 @@
+/*
+ * Misc useful routines to access NIC SROM/OTP .
+
diff -urN linux.old/arch/mips/bcm947xx/broadcom/bcmutils.c linux.dev/arch/mips/bcm947xx/broadcom/bcmutils.c
--- linux.old/arch/mips/bcm947xx/broadcom/bcmutils.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/bcmutils.c 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/bcmutils.c 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,356 @@
+/*
+ * Misc useful OS-independent routines.
+#endif
diff -urN linux.old/arch/mips/bcm947xx/broadcom/cfe_env.c linux.dev/arch/mips/bcm947xx/broadcom/cfe_env.c
--- linux.old/arch/mips/bcm947xx/broadcom/cfe_env.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/cfe_env.c 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/cfe_env.c 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,234 @@
+/*
+ * NVRAM variable manipulation (Linux kernel half)
+
diff -urN linux.old/arch/mips/bcm947xx/broadcom/linux_osl.c linux.dev/arch/mips/bcm947xx/broadcom/linux_osl.c
--- linux.old/arch/mips/bcm947xx/broadcom/linux_osl.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/linux_osl.c 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/linux_osl.c 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,102 @@
+/*
+ * Linux OS Independent Layer
+
diff -urN linux.old/arch/mips/bcm947xx/broadcom/Makefile linux.dev/arch/mips/bcm947xx/broadcom/Makefile
--- linux.old/arch/mips/bcm947xx/broadcom/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/Makefile 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/Makefile 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,6 @@
+#
+# Makefile for the BCM47xx specific kernel interface routines
+obj-y := sbutils.o linux_osl.o bcmsrom.o bcmutils.o sbmips.o sbpci.o sflash.o nvram.o cfe_env.o
diff -urN linux.old/arch/mips/bcm947xx/broadcom/nvram.c linux.dev/arch/mips/bcm947xx/broadcom/nvram.c
--- linux.old/arch/mips/bcm947xx/broadcom/nvram.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/nvram.c 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/nvram.c 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,192 @@
+/*
+ * NVRAM variable manipulation (Linux kernel half)
+EXPORT_SYMBOL(nvram_get);
diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbmips.c linux.dev/arch/mips/bcm947xx/broadcom/sbmips.c
--- linux.old/arch/mips/bcm947xx/broadcom/sbmips.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/sbmips.c 2006-10-15 23:46:15.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/sbmips.c 2006-11-03 21:19:49.000000000 +0100
@@ -0,0 +1,1115 @@
+/*
+ * BCM47XX Sonics SiliconBackplane MIPS core routines
+ return rate;
+}
+
-+
-
++EXPORT_SYMBOL(sb_irq);
diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbpci.c linux.dev/arch/mips/bcm947xx/broadcom/sbpci.c
--- linux.old/arch/mips/bcm947xx/broadcom/sbpci.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/sbpci.c 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/sbpci.c 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,534 @@
+/*
+ * Low-Level PCI and SB support for BCM47xx
+
diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbutils.c linux.dev/arch/mips/bcm947xx/broadcom/sbutils.c
--- linux.old/arch/mips/bcm947xx/broadcom/sbutils.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/sbutils.c 2006-10-15 23:29:14.000000000 +0200
-@@ -0,0 +1,2371 @@
++++ linux.dev/arch/mips/bcm947xx/broadcom/sbutils.c 2006-11-03 21:22:22.000000000 +0100
+@@ -0,0 +1,2375 @@
+/*
+ * Misc utility routines for accessing chip-specific features
+ * of the SiliconBackplane-based Broadcom chips.
+
+EXPORT_SYMBOL(sb_boardtype);
+EXPORT_SYMBOL(sb_boardvendor);
++EXPORT_SYMBOL(sb_corereg);
++EXPORT_SYMBOL(sb_coreidx);
++EXPORT_SYMBOL(sb_setcore);
++EXPORT_SYMBOL(sb_setcoreidx);
+EXPORT_SYMBOL(sb_gpiocontrol);
+EXPORT_SYMBOL(sb_gpioin);
+EXPORT_SYMBOL(sb_gpiointmask);
+EXPORT_SYMBOL(sb_kattach);
diff -urN linux.old/arch/mips/bcm947xx/broadcom/sflash.c linux.dev/arch/mips/bcm947xx/broadcom/sflash.c
--- linux.old/arch/mips/bcm947xx/broadcom/sflash.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/sflash.c 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/sflash.c 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,418 @@
+/*
+ * Broadcom SiliconBackplane chipcommon serial flash interface
+
diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs.h linux.dev/arch/mips/bcm947xx/include/bcmdevs.h
--- linux.old/arch/mips/bcm947xx/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmdevs.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/bcmdevs.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,391 @@
+/*
+ * Broadcom device-specific manifest constants.
+#endif /* _BCMDEVS_H */
diff -urN linux.old/arch/mips/bcm947xx/include/bcmendian.h linux.dev/arch/mips/bcm947xx/include/bcmendian.h
--- linux.old/arch/mips/bcm947xx/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmendian.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/bcmendian.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,152 @@
+/*
+ * local version of endian.h - byte order defines
+#endif /* _BCMENDIAN_H_ */
diff -urN linux.old/arch/mips/bcm947xx/include/bcmnvram.h linux.dev/arch/mips/bcm947xx/include/bcmnvram.h
--- linux.old/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmnvram.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/bcmnvram.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,95 @@
+/*
+ * NVRAM variable manipulation
+#endif /* _bcmnvram_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/bcmsrom.h linux.dev/arch/mips/bcm947xx/include/bcmsrom.h
--- linux.old/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmsrom.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/bcmsrom.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,23 @@
+/*
+ * Misc useful routines to access NIC local SROM/OTP .
+#endif /* _bcmsrom_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/bcmutils.h linux.dev/arch/mips/bcm947xx/include/bcmutils.h
--- linux.old/arch/mips/bcm947xx/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmutils.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/bcmutils.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,308 @@
+/*
+ * Misc useful os-independent macros and functions.
+#endif /* _bcmutils_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/bitfuncs.h linux.dev/arch/mips/bcm947xx/include/bitfuncs.h
--- linux.old/arch/mips/bcm947xx/include/bitfuncs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bitfuncs.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/bitfuncs.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,85 @@
+/*
+ * bit manipulation utility functions
+#endif /* _BITFUNCS_H */
diff -urN linux.old/arch/mips/bcm947xx/include/flash.h linux.dev/arch/mips/bcm947xx/include/flash.h
--- linux.old/arch/mips/bcm947xx/include/flash.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/flash.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/flash.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,188 @@
+/*
+ * flash.h: Common definitions for flash access.
+#endif
diff -urN linux.old/arch/mips/bcm947xx/include/flashutl.h linux.dev/arch/mips/bcm947xx/include/flashutl.h
--- linux.old/arch/mips/bcm947xx/include/flashutl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/flashutl.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/flashutl.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,27 @@
+/*
+ * BCM47XX FLASH driver interface
+#endif /* _flashutl_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/hndmips.h linux.dev/arch/mips/bcm947xx/include/hndmips.h
--- linux.old/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/hndmips.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/hndmips.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,16 @@
+/*
+ * Alternate include file for HND sbmips.h since CFE also ships with
+#include "sbmips.h"
diff -urN linux.old/arch/mips/bcm947xx/include/linux_osl.h linux.dev/arch/mips/bcm947xx/include/linux_osl.h
--- linux.old/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/linux_osl.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/linux_osl.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,331 @@
+/*
+ * Linux OS Independent Layer
+#endif /* _linux_osl_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/linuxver.h linux.dev/arch/mips/bcm947xx/include/linuxver.h
--- linux.old/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/linuxver.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/linuxver.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,389 @@
+/*
+ * Linux-specific abstractions to gain some independence from linux kernel versions.
+#endif /* _linuxver_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/mipsinc.h linux.dev/arch/mips/bcm947xx/include/mipsinc.h
--- linux.old/arch/mips/bcm947xx/include/mipsinc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/mipsinc.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/mipsinc.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,552 @@
+/*
+ * HND Run Time Environment for standalone MIPS programs.
+#endif /* _MISPINC_H */
diff -urN linux.old/arch/mips/bcm947xx/include/osl.h linux.dev/arch/mips/bcm947xx/include/osl.h
--- linux.old/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/osl.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/osl.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,42 @@
+/*
+ * OS Abstraction Layer
+#endif /* _osl_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/pcicfg.h linux.dev/arch/mips/bcm947xx/include/pcicfg.h
--- linux.old/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/pcicfg.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/pcicfg.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,398 @@
+/*
+ * pcicfg.h: PCI configuration constants and structures.
+#endif
diff -urN linux.old/arch/mips/bcm947xx/include/proto/ethernet.h linux.dev/arch/mips/bcm947xx/include/proto/ethernet.h
--- linux.old/arch/mips/bcm947xx/include/proto/ethernet.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/proto/ethernet.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/proto/ethernet.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,145 @@
+/*******************************************************************************
+ * $Id$
+#endif /* _NET_ETHERNET_H_ */
diff -urN linux.old/arch/mips/bcm947xx/include/s5.h linux.dev/arch/mips/bcm947xx/include/s5.h
--- linux.old/arch/mips/bcm947xx/include/s5.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/s5.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/s5.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,103 @@
+#ifndef _S5_H_
+#define _S5_H_
+#endif /*!_S5_H_ */
diff -urN linux.old/arch/mips/bcm947xx/include/sbchipc.h linux.dev/arch/mips/bcm947xx/include/sbchipc.h
--- linux.old/arch/mips/bcm947xx/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbchipc.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbchipc.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,440 @@
+/*
+ * SiliconBackplane Chipcommon core hardware definitions.
+#endif /* _SBCHIPC_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbconfig.h linux.dev/arch/mips/bcm947xx/include/sbconfig.h
--- linux.old/arch/mips/bcm947xx/include/sbconfig.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbconfig.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbconfig.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,342 @@
+/*
+ * Broadcom SiliconBackplane hardware register definitions.
+#endif /* _SBCONFIG_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbextif.h linux.dev/arch/mips/bcm947xx/include/sbextif.h
--- linux.old/arch/mips/bcm947xx/include/sbextif.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbextif.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbextif.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,242 @@
+/*
+ * Hardware-specific External Interface I/O core definitions
+#endif /* _SBEXTIF_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbmemc.h linux.dev/arch/mips/bcm947xx/include/sbmemc.h
--- linux.old/arch/mips/bcm947xx/include/sbmemc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbmemc.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbmemc.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,148 @@
+/*
+ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions.
+#endif /* _SBMEMC_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbmips.h linux.dev/arch/mips/bcm947xx/include/sbmips.h
--- linux.old/arch/mips/bcm947xx/include/sbmips.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbmips.h 2006-10-15 23:37:15.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbmips.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,63 @@
+/*
+ * Broadcom SiliconBackplane MIPS definitions
+#endif /* _SBMIPS_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbpci.h linux.dev/arch/mips/bcm947xx/include/sbpci.h
--- linux.old/arch/mips/bcm947xx/include/sbpci.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbpci.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbpci.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,122 @@
+/*
+ * BCM47XX Sonics SiliconBackplane PCI core hardware definitions.
+#endif /* _SBPCI_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbsdram.h linux.dev/arch/mips/bcm947xx/include/sbsdram.h
--- linux.old/arch/mips/bcm947xx/include/sbsdram.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbsdram.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbsdram.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,75 @@
+/*
+ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions.
+#endif /* _SBSDRAM_H */
diff -urN linux.old/arch/mips/bcm947xx/include/sbutils.h linux.dev/arch/mips/bcm947xx/include/sbutils.h
--- linux.old/arch/mips/bcm947xx/include/sbutils.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbutils.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbutils.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,136 @@
+/*
+ * Misc utility routines for accessing chip-specific features
+#endif /* _sbutils_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/sflash.h linux.dev/arch/mips/bcm947xx/include/sflash.h
--- linux.old/arch/mips/bcm947xx/include/sflash.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sflash.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sflash.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,36 @@
+/*
+ * Broadcom SiliconBackplane chipcommon serial flash interface
+#endif /* _sflash_h_ */
diff -urN linux.old/arch/mips/bcm947xx/include/trxhdr.h linux.dev/arch/mips/bcm947xx/include/trxhdr.h
--- linux.old/arch/mips/bcm947xx/include/trxhdr.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/trxhdr.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/trxhdr.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,33 @@
+/*
+ * TRX image file header format.
+typedef struct trx_header TRXHDR, *PTRXHDR;
diff -urN linux.old/arch/mips/bcm947xx/include/typedefs.h linux.dev/arch/mips/bcm947xx/include/typedefs.h
--- linux.old/arch/mips/bcm947xx/include/typedefs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/typedefs.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/typedefs.h 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,326 @@
+/*
+ * Copyright 2005, Broadcom Corporation
+#endif /* _TYPEDEFS_H_ */
diff -urN linux.old/arch/mips/bcm947xx/irq.c linux.dev/arch/mips/bcm947xx/irq.c
--- linux.old/arch/mips/bcm947xx/irq.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/irq.c 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/irq.c 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
+}
diff -urN linux.old/arch/mips/bcm947xx/Makefile linux.dev/arch/mips/bcm947xx/Makefile
--- linux.old/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/Makefile 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/Makefile 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,6 @@
+#
+# Makefile for the BCM47xx specific kernel interface routines
+obj-y := irq.o prom.o setup.o time.o pci.o
diff -urN linux.old/arch/mips/bcm947xx/pci.c linux.dev/arch/mips/bcm947xx/pci.c
--- linux.old/arch/mips/bcm947xx/pci.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/pci.c 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/pci.c 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,227 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcm47xx_fixup_bridge);
diff -urN linux.old/arch/mips/bcm947xx/prom.c linux.dev/arch/mips/bcm947xx/prom.c
--- linux.old/arch/mips/bcm947xx/prom.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/prom.c 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/prom.c 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
+}
diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setup.c
--- linux.old/arch/mips/bcm947xx/setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/setup.c 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/setup.c 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
+EXPORT_SYMBOL(boardflags);
diff -urN linux.old/arch/mips/bcm947xx/time.c linux.dev/arch/mips/bcm947xx/time.c
--- linux.old/arch/mips/bcm947xx/time.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/time.c 2006-10-15 23:38:36.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/time.c 2006-11-03 21:10:13.000000000 +0100
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
+ setup_irq(7, irq);
+}
diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig
---- linux.old/arch/mips/Kconfig 2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/arch/mips/Kconfig 2006-10-15 23:29:14.000000000 +0200
+--- linux.old/arch/mips/Kconfig 2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/arch/mips/Kconfig 2006-11-03 21:10:13.000000000 +0100
@@ -245,6 +245,17 @@
Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
Olivetti M700-10 workstations.
bool "LASAT Networks platforms"
select DMA_NONCOHERENT
diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c
---- linux.old/arch/mips/kernel/cpu-probe.c 2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/arch/mips/kernel/cpu-probe.c 2006-10-15 23:29:14.000000000 +0200
+--- linux.old/arch/mips/kernel/cpu-probe.c 2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/arch/mips/kernel/cpu-probe.c 2006-11-03 21:10:13.000000000 +0100
@@ -691,6 +691,28 @@
}
cpu_probe_sandcraft(c);
break;
diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
---- linux.old/arch/mips/kernel/head.S 2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/arch/mips/kernel/head.S 2006-10-15 23:29:14.000000000 +0200
+--- linux.old/arch/mips/kernel/head.S 2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/arch/mips/kernel/head.S 2006-11-03 21:10:13.000000000 +0100
@@ -133,6 +133,11 @@
j kernel_entry
nop
* Reserved space for exception handlers.
* Necessary for machines which link their kernels at KSEG0.
diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c
---- linux.old/arch/mips/kernel/proc.c 2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/arch/mips/kernel/proc.c 2006-10-15 23:29:14.000000000 +0200
+--- linux.old/arch/mips/kernel/proc.c 2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/arch/mips/kernel/proc.c 2006-11-03 21:10:13.000000000 +0100
@@ -84,6 +84,8 @@
[CPU_VR4181] = "NEC VR4181",
[CPU_VR4181A] = "NEC VR4181A",
};
diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
---- linux.old/arch/mips/Makefile 2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/arch/mips/Makefile 2006-10-15 23:29:14.000000000 +0200
+--- linux.old/arch/mips/Makefile 2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/arch/mips/Makefile 2006-11-03 21:10:13.000000000 +0100
@@ -565,6 +565,13 @@
load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
#
core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/
diff -urN linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c
---- linux.old/arch/mips/mm/tlbex.c 2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/arch/mips/mm/tlbex.c 2006-10-15 23:31:06.000000000 +0200
+--- linux.old/arch/mips/mm/tlbex.c 2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/arch/mips/mm/tlbex.c 2006-11-03 21:15:12.000000000 +0100
@@ -882,6 +882,8 @@
case CPU_4KSC:
case CPU_20KC:
break;
diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
---- linux.old/include/asm-mips/bootinfo.h 2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/include/asm-mips/bootinfo.h 2006-10-15 23:29:14.000000000 +0200
+--- linux.old/include/asm-mips/bootinfo.h 2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/include/asm-mips/bootinfo.h 2006-11-03 21:10:13.000000000 +0100
@@ -218,6 +218,12 @@
#define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */
#define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */
const char *get_system_type(void);
diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h
---- linux.old/include/asm-mips/cpu.h 2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/include/asm-mips/cpu.h 2006-10-15 23:29:14.000000000 +0200
+--- linux.old/include/asm-mips/cpu.h 2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/include/asm-mips/cpu.h 2006-11-03 21:10:13.000000000 +0100
@@ -104,6 +104,13 @@
#define PRID_IMP_SR71000 0x0400
/*
* ISA Level encodings
diff -urN linux.old/include/linux/pci_ids.h linux.dev/include/linux/pci_ids.h
---- linux.old/include/linux/pci_ids.h 2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/include/linux/pci_ids.h 2006-10-15 23:29:14.000000000 +0200
+--- linux.old/include/linux/pci_ids.h 2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/include/linux/pci_ids.h 2006-11-03 21:10:13.000000000 +0100
@@ -1906,6 +1906,7 @@
#define PCI_DEVICE_ID_TIGON3_5901_2 0x170e
#define PCI_DEVICE_ID_BCM4401 0x4401
#define PCI_VENDOR_ID_TOPIC 0x151f
#define PCI_DEVICE_ID_TOPIC_TP560 0x0000
+diff -urN linux.old/lib/kobject_uevent.c linux.dev/lib/kobject_uevent.c
+--- linux.old/lib/kobject_uevent.c 2006-06-18 03:49:35.000000000 +0200
++++ linux.dev/lib/kobject_uevent.c 2006-11-03 21:44:56.000000000 +0100
+@@ -29,6 +29,7 @@
+ u64 uevent_seqnum;
+ char uevent_helper[UEVENT_HELPER_PATH_LEN] = "/sbin/hotplug";
+ static DEFINE_SPINLOCK(sequence_lock);
++EXPORT_SYMBOL(uevent_helper);
+ #if defined(CONFIG_NET)
+ static struct sock *uevent_sock;
+ #endif
projects / openwrt.git / commitdiff