ramips: enable additional GPIOs on HAME MPR-A1

According to the pcb tracing results[1] by anton.rad[2] MPR-A1s expose
6 unused GPIOs, only one of them working as configured in the current
DTS. This patch enables GPIO22-26.

Tested on hardware.

[1] http://i.imgur.com/kHVW2Ox.jpg
[2] https://forum.openwrt.org/viewtopic.php?pid=222698#p222698

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42178 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ramips/dts/MPRA1.dts b/target/linux/ramips/dts/MPRA1.dts
index 9b4ee34..60a23fe 100644 (file)
--- a/target/linux/ramips/dts/MPRA1.dts
+++ b/target/linux/ramips/dts/MPRA1.dts
@@ -41,12 +41,15 @@
                                };
                        };
                };
+               gpio1: gpio@660 {
+                       status = "okay";
+               };
        };
 
        pinctrl {
                state_default: pinctrl0 {
                        gpio {
-                               ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+                               ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
                                ralink,function = "gpio";
                        };
                };