+ /* same hardware as WRT160NV3 and Cisco Valet M10V1, but different board detection, combine? */
+ [E1000V1] = {
+ .name = "Linksys E1000 V1",
+ .buttons = {
+ { .name = "reset", .gpio = 1 << 6 },
+ { .name = "wps", .gpio = 1 << 5 }, /* nvram get gpio5=wps_button */
+ },
+ .leds = {
+ /** turns on leds for all ethernet ports (wan too)
+ * this also disconnects some, or maybe all, ethernet ports
+ * 1: leds work normally
+ * 0: all lit all the time */
+ /* nvram get gpio3=robo_reset */
+ { .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL },
+ { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
+ { .name = "ses_blue", .gpio = 1 << 4, .polarity = REVERSE }, /* nvram get gpio4=wps_led */
+ { .name = "ses_orange", .gpio = 1 << 2, .polarity = REVERSE }, /* nvram get gpio2=wps_status_led */
+ },
+ },