lantiq: Switch FRITZ3370 from spi-gpio to the hardware SPI driver
authornbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Sun, 17 Jan 2016 19:55:31 +0000 (19:55 +0000)
committernbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Sun, 17 Jan 2016 19:55:31 +0000 (19:55 +0000)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48288 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/lantiq/dts/FRITZ3370.dts

index 7344052..c6a593b 100644 (file)
@@ -68,7 +68,7 @@
                        state_default: pinmux {
                                spi {
                                        lantiq,groups = "spi", "spi_cs4";
-                                       lantiq,function = "gpio";
+                                       lantiq,function = "spi";
                                };
                                mdio {
                                        lantiq,groups = "mdio";
                };
        };
 
-       spi {
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               compatible = "spi-gpio";
-
-               gpio-miso = <&gpio 16 0>;
-               gpio-mosi = <&gpio 17 0>;
-               gpio-sck = <&gpio 18 0>;
-               num-chipselects = <1>;
-               cs-gpios = <&gpio 10 1>;
-
-               m25p80@0 {
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       compatible = "jedec,spi-nor";
-                       reg = <0 0>;
-                       spi-max-frequency = <1000000>;
-
-                       ath9k_cal: partition@0 {
-                               reg = <0x0 0x20000>;
-                               label = "urlader";
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               reg = <0x20000 0x10000>;
-                               label = "tffs (1)";
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               reg = <0x30000 0x10000>;
-                               label = "tffs (2)";
-                               read-only;
-                       };
-               };
-       };
-
        ath9k_eep {
                compatible = "ath9k,eeprom";
                ath,eep-flash = <&ath9k_cal 0x985>;
                };
        };
 };
+
+&spi {
+       status = "ok";
+
+       m25p80@3 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <3 0>;
+               spi-max-frequency = <1000000>;
+
+               ath9k_cal: partition@0 {
+                       reg = <0x0 0x20000>;
+                       label = "urlader";
+                       read-only;
+               };
+
+               partition@20000 {
+                       reg = <0x20000 0x10000>;
+                       label = "tffs (1)";
+                       read-only;
+               };
+
+               partition@30000 {
+                       reg = <0x30000 0x10000>;
+                       label = "tffs (2)";
+                       read-only;
+               };
+       };
+};