ralink: add support for mt7621 ethernet

[openwrt.git] / target / linux / ramips / mt7621 / config-3.14

diff --git a/target/linux/ramips/mt7621/config-3.14 b/target/linux/ramips/mt7621/config-3.14
index cb00c51..8a75b3b 100644 (file)
--- a/target/linux/ramips/mt7621/config-3.14
+++ b/target/linux/ramips/mt7621/config-3.14
@@ -1,4 +1,3 @@
-# CONFIG_32B_DESC is not set
 CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
 CONFIG_ARCH_DISCARD_MEMBLOCK=y
 CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
@@ -39,12 +38,11 @@ CONFIG_DMA_NONCOHERENT=y
 CONFIG_DTB_RT_NONE=y
 CONFIG_DTC=y
 CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_8250 is not set
 CONFIG_ESW_DOUBLE_VLAN_TAG=y
 # CONFIG_GE1_MII_AN is not set
 # CONFIG_GE1_MII_FORCE_100 is not set
 # CONFIG_GE1_RGMII_AN is not set
-CONFIG_GE1_RGMII_FORCE_1000=y
+# CONFIG_GE1_RGMII_FORCE_1000 is not set
 # CONFIG_GE1_RGMII_NONE is not set
 # CONFIG_GE1_RVMII_FORCE_100 is not set
 # CONFIG_GE1_TRGMII_FORCE_1200 is not set
@@ -60,6 +58,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_DEVRES=y
 # CONFIG_GPIO_MT7621 is not set
+CONFIG_GPIO_RALINK=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_HARDWARE_WATCHPOINTS=y
 CONFIG_HAS_DMA=y
@@ -122,7 +121,6 @@ CONFIG_MIPS_MT_SMP=y
 # CONFIG_MIPS_O32_FP64_SUPPORT is not set
 CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
 # CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_MLX5_CORE is not set
 CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MT7621_ASIC=y
 # CONFIG_MT7621_WDT is not set
@@ -134,8 +132,10 @@ CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_UIMAGE_SPLIT=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NET_FLOW_LIMIT=y
-# CONFIG_NET_RALINK is not set
-CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_NET_RALINK=y
+CONFIG_NET_RALINK_GSW_MT7620=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NET_RALINK_MT7620=y
 CONFIG_NLS=m
 CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
 CONFIG_NR_CPUS=4
@@ -154,7 +154,6 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PCI=y
 CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_PDMA_NEW=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
 # CONFIG_PINCONF is not set
@@ -162,17 +161,8 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_RT2880=y
 # CONFIG_PINCTRL_SINGLE is not set
 # CONFIG_PREEMPT_RCU is not set
-CONFIG_RAETH=y
-CONFIG_RAETH_CHECKSUM_OFFLOAD=y
-# CONFIG_RAETH_GMAC2 is not set
-# CONFIG_RAETH_HW_VLAN_RX is not set
-# CONFIG_RAETH_HW_VLAN_TX is not set
-# CONFIG_RAETH_LRO is not set
+# CONFIG_RAETH is not set
 # CONFIG_RAETH_NAPI is not set
-# CONFIG_RAETH_QDMA is not set
-CONFIG_RAETH_SCATTER_GATHER_RX_DMA=y
-# CONFIG_RAETH_SKB_RECYCLE_2K is not set
-# CONFIG_RAETH_SPECIAL_TAG is not set
 # CONFIG_RAETH_TSO is not set
 CONFIG_RALINK=y
 CONFIG_RALINK_MT7621=y
@@ -180,7 +170,7 @@ CONFIG_RALINK_USBPHY=y
 # CONFIG_RALINK_WDT is not set
 CONFIG_RA_NAT_NONE=y
 # CONFIG_RA_NETWORK_TASKLET_BH is not set
-CONFIG_RA_NETWORK_WORKQUEUE_BH=y
+# CONFIG_RA_NETWORK_WORKQUEUE_BH is not set
 CONFIG_RCU_STALL_COMMON=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RFS_ACCEL=y
@@ -228,10 +218,9 @@ CONFIG_USB_SUPPORT=y
 CONFIG_USB_XHCI_HCD=m
 CONFIG_USB_XHCI_PLATFORM=y
 CONFIG_USE_OF=y
-CONFIG_WAN_AT_P0=y
+# CONFIG_WAN_AT_P0 is not set
 # CONFIG_WAN_AT_P4 is not set
 CONFIG_WATCHDOG_CORE=y
 CONFIG_WEAK_ORDERING=y
 CONFIG_XPS=y
-# CONFIG_ZBUD is not set
 CONFIG_ZONE_DMA_FLAG=0