+++ /dev/null
-From 810c2afe0c7e1be9352ad512b337110b100bfe3a Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 08:51:14 +0000
-Subject: [PATCH 36/57] NET: add mt7621 ethernet driver
-
----
- arch/mips/include/asm/rt2880/board-custom.h | 153 +++
- arch/mips/include/asm/rt2880/eureka_ep430.h | 204 ++++
- arch/mips/include/asm/rt2880/generic.h | 42 +
- arch/mips/include/asm/rt2880/lm.h | 32 +
- arch/mips/include/asm/rt2880/prom.h | 50 +
- arch/mips/include/asm/rt2880/rt_mmap.h | 796 ++++++++++++++++
- arch/mips/include/asm/rt2880/serial_rt2880.h | 443 +++++++++
- arch/mips/include/asm/rt2880/sizes.h | 52 +
- arch/mips/include/asm/rt2880/surfboard.h | 70 ++
- arch/mips/include/asm/rt2880/surfboardint.h | 190 ++++
- arch/mips/include/asm/rt2880/war.h | 25 +
- drivers/net/ethernet/Kconfig | 1 +
- drivers/net/ethernet/Makefile | 1 +
- drivers/net/ethernet/raeth/Kconfig | 344 +++++++
- drivers/net/ethernet/raeth/Makefile | 7 +
- drivers/net/ethernet/raeth/ethtool_readme.txt | 44 +
- drivers/net/ethernet/raeth/mii_mgr.c | 166 ++++
- drivers/net/ethernet/raeth/ra2882ethreg.h | 1268 +++++++++++++++++++++++++
- drivers/net/ethernet/raeth/ra_ioctl.h | 92 ++
- drivers/net/ethernet/raeth/ra_mac.c | 98 ++
- drivers/net/ethernet/raeth/ra_mac.h | 35 +
- drivers/net/ethernet/raeth/raether.c | 693 ++++++++++++++
- drivers/net/ethernet/raeth/raether.h | 92 ++
- drivers/net/ethernet/raeth/raether_pdma.c | 212 +++++
- drivers/net/ethernet/raeth/raether_qdma.c | 805 ++++++++++++++++
- 25 files changed, 5915 insertions(+)
- create mode 100644 arch/mips/include/asm/rt2880/board-custom.h
- create mode 100644 arch/mips/include/asm/rt2880/eureka_ep430.h
- create mode 100644 arch/mips/include/asm/rt2880/generic.h
- create mode 100644 arch/mips/include/asm/rt2880/lm.h
- create mode 100644 arch/mips/include/asm/rt2880/prom.h
- create mode 100644 arch/mips/include/asm/rt2880/rt_mmap.h
- create mode 100644 arch/mips/include/asm/rt2880/serial_rt2880.h
- create mode 100644 arch/mips/include/asm/rt2880/sizes.h
- create mode 100644 arch/mips/include/asm/rt2880/surfboard.h
- create mode 100644 arch/mips/include/asm/rt2880/surfboardint.h
- create mode 100644 arch/mips/include/asm/rt2880/war.h
- create mode 100644 drivers/net/ethernet/raeth/Kconfig
- create mode 100644 drivers/net/ethernet/raeth/Makefile
- create mode 100644 drivers/net/ethernet/raeth/ethtool_readme.txt
- create mode 100644 drivers/net/ethernet/raeth/mii_mgr.c
- create mode 100644 drivers/net/ethernet/raeth/ra2882ethreg.h
- create mode 100644 drivers/net/ethernet/raeth/ra_ioctl.h
- create mode 100644 drivers/net/ethernet/raeth/ra_mac.c
- create mode 100644 drivers/net/ethernet/raeth/ra_mac.h
- create mode 100644 drivers/net/ethernet/raeth/raether.c
- create mode 100644 drivers/net/ethernet/raeth/raether.h
- create mode 100644 drivers/net/ethernet/raeth/raether_pdma.c
- create mode 100644 drivers/net/ethernet/raeth/raether_qdma.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/board-custom.h
-@@ -0,0 +1,153 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ */
-+/* MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+#ifndef __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H
-+#define __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H
-+
-+#include <linux/autoconf.h>
-+
-+/*=======================================================================*/
-+/* MT6575 SD */
-+/*=======================================================================*/
-+#ifdef MTK_EMMC_SUPPORT
-+#define CFG_DEV_MSDC0
-+#endif
-+#define CFG_DEV_MSDC1
-+#define CFG_DEV_MSDC2
-+#define CFG_DEV_MSDC3
-+#if defined(CONFIG_MTK_COMBO) || defined(CONFIG_MTK_COMBO_MODULE)
-+/*
-+SDIO slot index number used by connectivity combo chip:
-+0: invalid (used by memory card)
-+1: MSDC1
-+2: MSDC2
-+*/
-+#define CONFIG_MTK_WCN_CMB_SDIO_SLOT (2) /* MSDC2 */
-+#else
-+#undef CONFIG_MTK_WCN_CMB_SDIO_SLOT
-+#endif
-+
-+#if 0 /* FIXME. */
-+/*=======================================================================*/
-+/* MT6575 UART */
-+/*=======================================================================*/
-+#define CFG_DEV_UART1
-+#define CFG_DEV_UART2
-+#define CFG_DEV_UART3
-+#define CFG_DEV_UART4
-+
-+#define CFG_UART_PORTS (4)
-+
-+/*=======================================================================*/
-+/* MT6575 I2C */
-+/*=======================================================================*/
-+#define CFG_DEV_I2C
-+//#define CFG_I2C_HIGH_SPEED_MODE
-+//#define CFG_I2C_DMA_MODE
-+
-+/*=======================================================================*/
-+/* MT6575 ADB */
-+/*=======================================================================*/
-+#define ADB_SERIAL "E1K"
-+
-+#endif
-+
-+/*=======================================================================*/
-+/* MT6575 NAND FLASH */
-+/*=======================================================================*/
-+#if 0
-+#define RAMDOM_READ 1<<0
-+#define CACHE_READ 1<<1
-+/*******************************************************************************
-+ * NFI & ECC Configuration
-+ *******************************************************************************/
-+typedef struct
-+{
-+ u16 id; //deviceid+menuid
-+ u8 addr_cycle;
-+ u8 iowidth;
-+ u16 totalsize;
-+ u16 blocksize;
-+ u16 pagesize;
-+ u32 timmingsetting;
-+ char devciename[14];
-+ u32 advancedmode; //
-+}flashdev_info,*pflashdev_info;
-+
-+static const flashdev_info g_FlashTable[]={
-+ //micro
-+ {0xAA2C, 5, 8, 256, 128, 2048, 0x01113, "MT29F2G08ABD", 0},
-+ {0xB12C, 4, 16, 128, 128, 2048, 0x01113, "MT29F1G16ABC", 0},
-+ {0xBA2C, 5, 16, 256, 128, 2048, 0x01113, "MT29F2G16ABD", 0},
-+ {0xAC2C, 5, 8, 512, 128, 2048, 0x01113, "MT29F4G08ABC", 0},
-+ {0xBC2C, 5, 16, 512, 128, 2048, 0x44333, "MT29F4G16ABD", 0},
-+ //samsung
-+ {0xBAEC, 5, 16, 256, 128, 2048, 0x01123, "K522H1GACE", 0},
-+ {0xBCEC, 5, 16, 512, 128, 2048, 0x01123, "K524G2GACB", 0},
-+ {0xDAEC, 5, 8, 256, 128, 2048, 0x33222, "K9F2G08U0A", RAMDOM_READ},
-+ {0xF1EC, 4, 8, 128, 128, 2048, 0x01123, "K9F1G08U0A", RAMDOM_READ},
-+ {0xAAEC, 5, 8, 256, 128, 2048, 0x01123, "K9F2G08R0A", 0},
-+ //hynix
-+ {0xD3AD, 5, 8, 1024, 256, 2048, 0x44333, "HY27UT088G2A", 0},
-+ {0xA1AD, 4, 8, 128, 128, 2048, 0x01123, "H8BCSOPJOMCP", 0},
-+ {0xBCAD, 5, 16, 512, 128, 2048, 0x01123, "H8BCSOUNOMCR", 0},
-+ {0xBAAD, 5, 16, 256, 128, 2048, 0x01123, "H8BCSOSNOMCR", 0},
-+ //toshiba
-+ {0x9598, 5, 16, 816, 128, 2048, 0x00113, "TY9C000000CMG", 0},
-+ {0x9498, 5, 16, 375, 128, 2048, 0x00113, "TY9C000000CMG", 0},
-+ {0xC198, 4, 16, 128, 128, 2048, 0x44333, "TC58NWGOS8C", 0},
-+ {0xBA98, 5, 16, 256, 128, 2048, 0x02113, "TC58NYG1S8C", 0},
-+ //st-micro
-+ {0xBA20, 5, 16, 256, 128, 2048, 0x01123, "ND02CGR4B2DI6", 0},
-+
-+ // elpida
-+ {0xBC20, 5, 16, 512, 128, 2048, 0x01123, "04GR4B2DDI6", 0},
-+ {0x0000, 0, 0, 0, 0, 0, 0, "xxxxxxxxxxxxx", 0}
-+};
-+#endif
-+
-+
-+#define NFI_DEFAULT_ACCESS_TIMING (0x44333)
-+
-+//uboot only support 1 cs
-+#define NFI_CS_NUM (2)
-+#define NFI_DEFAULT_CS (0)
-+
-+#define USE_AHB_MODE (1)
-+
-+#define PLATFORM_EVB (1)
-+
-+#endif /* __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H */
-+
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/eureka_ep430.h
-@@ -0,0 +1,204 @@
-+/**************************************************************************
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef _EUREKA_EP430_H
-+#define _EUREKA_EP430_H
-+
-+
-+#include <asm/addrspace.h> /* for KSEG1ADDR() */
-+#include <asm/byteorder.h> /* for cpu_to_le32() */
-+#include <asm/mach-ralink/rt_mmap.h>
-+
-+
-+/*
-+ * Because of an error/peculiarity in the Galileo chip, we need to swap the
-+ * bytes when running bigendian.
-+ */
-+
-+#define MV_WRITE(ofs, data) \
-+ *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
-+#define MV_READ(ofs, data) \
-+ *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
-+#define MV_READ_DATA(ofs) \
-+ le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
-+
-+#define MV_WRITE_16(ofs, data) \
-+ *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data)
-+#define MV_READ_16(ofs, data) \
-+ *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs)))
-+
-+#define MV_WRITE_8(ofs, data) \
-+ *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data
-+#define MV_READ_8(ofs, data) \
-+ *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs))
-+
-+#define MV_SET_REG_BITS(ofs,bits) \
-+ (*((volatile u32 *)(RALINK_PCI_BASE+(ofs)))) |= ((u32)cpu_to_le32(bits))
-+#define MV_RESET_REG_BITS(ofs,bits) \
-+ (*((volatile u32 *)(RALINK_PCI_BASE+(ofs)))) &= ~((u32)cpu_to_le32(bits))
-+
-+#define RALINK_PCI_CONFIG_ADDR 0x20
-+#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
-+
-+#if defined(CONFIG_RALINK_RT2880) || defined(CONFIG_RALINK_RT2883)
-+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
-+#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
-+#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
-+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
-+#define RALINK_PCI_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0010)
-+#define RALINK_PCI_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0018)
-+#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
-+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
-+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
-+#define RALINK_PCI_ID *(volatile u32 *)(RALINK_PCI_BASE + 0x0030)
-+#define RALINK_PCI_CLASS *(volatile u32 *)(RALINK_PCI_BASE + 0x0034)
-+#define RALINK_PCI_SUBID *(volatile u32 *)(RALINK_PCI_BASE + 0x0038)
-+#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
-+#define RALINK_PCI_STATUS *(volatile u32 *)(RALINK_PCI_BASE + 0x0050)
-+
-+#elif defined(CONFIG_RALINK_RT3883)
-+
-+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
-+#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
-+#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
-+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
-+#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
-+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
-+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
-+#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
-+
-+/*
-+PCI0 --> PCI
-+PCI1 --> PCIe
-+*/
-+#define RT3883_PCI_OFFSET 0x1000
-+#define RT3883_PCIE_OFFSET 0x2000
-+
-+#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0010)
-+#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0018)
-+#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0030)
-+#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0034)
-+#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0038)
-+
-+#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0010)
-+#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0018)
-+#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0030)
-+#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0034)
-+#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0038)
-+#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0050)
-+
-+#elif defined(CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7628)
-+
-+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
-+#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
-+#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
-+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
-+#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
-+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
-+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
-+#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
-+
-+/*
-+PCI0 --> PCIe 0
-+PCI1 --> PCIe 1
-+*/
-+#define RT6855_PCIE0_OFFSET 0x2000
-+#define RT6855_PCIE1_OFFSET 0x3000
-+
-+#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
-+#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
-+#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
-+#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
-+#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
-+#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
-+#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
-+#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
-+
-+#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
-+#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
-+#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
-+#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
-+#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
-+#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
-+#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
-+#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
-+
-+#elif defined (CONFIG_RALINK_MT7621)
-+
-+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
-+#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
-+#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
-+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
-+#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
-+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
-+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
-+#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
-+
-+/*
-+PCI0 --> PCIe 0
-+PCI1 --> PCIe 1
-+PCI2 --> PCIe 2
-+*/
-+#define RT6855_PCIE0_OFFSET 0x2000
-+#define RT6855_PCIE1_OFFSET 0x3000
-+#define RT6855_PCIE2_OFFSET 0x4000
-+
-+#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
-+#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
-+#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
-+#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
-+#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
-+#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
-+#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
-+#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
-+
-+#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
-+#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
-+#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
-+#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
-+#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
-+#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
-+#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
-+#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
-+
-+#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
-+#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
-+#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030)
-+#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
-+#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
-+#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
-+#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060)
-+#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064)
-+
-+#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
-+#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000)
-+
-+#elif defined(CONFIG_RALINK_RT3052) || defined(CONFIG_RALINK_RT3352) || defined(CONFIG_RALINK_RT5350)
-+#else
-+#error "undefined in PCI"
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/generic.h
-@@ -0,0 +1,42 @@
-+/*
-+ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * Defines of the Palmchip boards specific address-MAP, registers, etc.
-+ */
-+#ifndef __ASM_SURFBOARD_GENERIC_H
-+#define __ASM_SURFBOARD_GENERIC_H
-+
-+#include <asm/addrspace.h>
-+#include <asm/byteorder.h>
-+#include <asm/mach-ralink/rt_mmap.h>
-+
-+/*
-+ * Reset register.
-+ */
-+#define SOFTRES_REG (KSEG1ADDR(RALINK_SYSCTL_BASE+0x34))
-+#define GORESET (0x1)
-+
-+/*
-+ * Power-off register
-+ */
-+#define POWER_DIR_REG (KSEG1ADDR(RALINK_PIO_BASE+0x24))
-+#define POWER_DIR_OUTPUT (0x80) /* GPIO 7 */
-+#define POWER_POL_REG (KSEG1ADDR(RALINK_PIO_BASE+0x28))
-+#define POWEROFF_REG (KSEG1ADDR(RALINK_PIO_BASE+0x20))
-+#define POWEROFF (0x0) /* drive low */
-+
-+
-+#endif /* __ASM_SURFBOARD_GENERIC_H */
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/lm.h
-@@ -0,0 +1,32 @@
-+#include <linux/version.h>
-+
-+struct lm_device {
-+ struct device dev;
-+ struct resource resource;
-+ unsigned int irq;
-+ unsigned int id;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ void *lm_drvdata;
-+#endif
-+};
-+
-+struct lm_driver {
-+ struct device_driver drv;
-+ int (*probe)(struct lm_device *);
-+ void (*remove)(struct lm_device *);
-+ int (*suspend)(struct lm_device *, u32);
-+ int (*resume)(struct lm_device *);
-+};
-+
-+int lm_driver_register(struct lm_driver *drv);
-+void lm_driver_unregister(struct lm_driver *drv);
-+
-+int lm_device_register(struct lm_device *dev);
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+# define lm_get_drvdata(lm) ((lm)->lm_drvdata)
-+# define lm_set_drvdata(lm,d) do { (lm)->lm_drvdata = (d); } while (0)
-+#else
-+# define lm_get_drvdata(lm) dev_get_drvdata(&(lm)->dev)
-+# define lm_set_drvdata(lm,d) dev_set_drvdata(&(lm)->dev, d)
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/prom.h
-@@ -0,0 +1,50 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * MIPS boards bootprom interface for the Linux kernel.
-+ *
-+ */
-+
-+#ifndef _MIPS_PROM_H
-+#define _MIPS_PROM_H
-+
-+extern char *prom_getcmdline(void);
-+extern char *prom_getenv(char *name);
-+extern void setup_prom_printf(int tty_no);
-+extern void prom_setup_printf(int tty_no);
-+extern void prom_printf(char *fmt, ...);
-+extern void prom_init_cmdline(void);
-+extern void prom_meminit(void);
-+extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
-+extern void prom_free_prom_memory (void);
-+extern void mips_display_message(const char *str);
-+extern void mips_display_word(unsigned int num);
-+extern int get_ethernet_addr(char *ethernet_addr);
-+
-+/* Memory descriptor management. */
-+#define PROM_MAX_PMEMBLOCKS 32
-+struct prom_pmemblock {
-+ unsigned long base; /* Within KSEG0. */
-+ unsigned int size; /* In bytes. */
-+ unsigned int type; /* free or prom memory */
-+};
-+
-+#endif /* !(_MIPS_PROM_H) */
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/rt_mmap.h
-@@ -0,0 +1,796 @@
-+/**************************************************************************
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ * register definition for Ralink RT-series SoC
-+ *
-+ * Copyright 2007 Ralink Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __RALINK_MMAP__
-+#define __RALINK_MMAP__
-+
-+#if defined (CONFIG_RALINK_RT2880_SHUTTLE)
-+
-+#define RALINK_SYSCTL_BASE 0xA0300000
-+#define RALINK_TIMER_BASE 0xA0300100
-+#define RALINK_INTCL_BASE 0xA0300200
-+#define RALINK_MEMCTRL_BASE 0xA0300300
-+#define RALINK_UART_BASE 0xA0300500
-+#define RALINK_PIO_BASE 0xA0300600
-+#define RALINK_I2C_BASE 0xA0300900
-+#define RALINK_SPI_BASE 0xA0300B00
-+#define RALINK_UART_LITE_BASE 0xA0300C00
-+#define RALINK_FRAME_ENGINE_BASE 0xA0310000
-+#define RALINK_EMBEDD_ROM_BASE 0xA0400000
-+#define RALINK_PCI_BASE 0xA0500000
-+#define RALINK_11N_MAC_BASE 0xA0600000
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_TIMER0 (1<<0)
-+#define RALINK_INTCTL_WDTIMER (1<<1)
-+#define RALINK_INTCTL_UART (1<<2)
-+#define RALINK_INTCTL_PIO (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UARTLITE (1<<8)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<23)
-+
-+//Reset Control Register
-+#define RALINK_TIMER_RST (1<<1)
-+#define RALINK_INTC_RST (1<<2)
-+#define RALINK_MC_RST (1<<3)
-+#define RALINK_CPU_RST (1<<4)
-+#define RALINK_UART_RST (1<<5)
-+#define RALINK_PIO_RST (1<<6)
-+#define RALINK_I2C_RST (1<<9)
-+#define RALINK_SPI_RST (1<<11)
-+#define RALINK_UART2_RST (1<<12)
-+#define RALINK_PCI_RST (1<<16)
-+#define RALINK_2860_RST (1<<17)
-+#define RALINK_FE_RST (1<<18)
-+#define RALINK_PCM_RST (1<<19)
-+
-+
-+#elif defined (CONFIG_RALINK_RT2880_MP)
-+
-+#define RALINK_SYSCTL_BASE 0xA0300000
-+#define RALINK_TIMER_BASE 0xA0300100
-+#define RALINK_INTCL_BASE 0xA0300200
-+#define RALINK_MEMCTRL_BASE 0xA0300300
-+#define RALINK_UART_BASE 0xA0300500
-+#define RALINK_PIO_BASE 0xA0300600
-+#define RALINK_I2C_BASE 0xA0300900
-+#define RALINK_SPI_BASE 0xA0300B00
-+#define RALINK_UART_LITE_BASE 0x00300C00
-+#define RALINK_FRAME_ENGINE_BASE 0xA0400000
-+#define RALINK_EMBEDD_ROM_BASE 0xA0410000
-+#define RALINK_PCI_BASE 0xA0440000
-+#define RALINK_11N_MAC_BASE 0xA0480000
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_TIMER0 (1<<0)
-+#define RALINK_INTCTL_WDTIMER (1<<1)
-+#define RALINK_INTCTL_UART (1<<2)
-+#define RALINK_INTCTL_PIO (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UARTLITE (1<<8)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<23)
-+
-+//Reset Control Register
-+#define RALINK_TIMER_RST (1<<1)
-+#define RALINK_INTC_RST (1<<2)
-+#define RALINK_MC_RST (1<<3)
-+#define RALINK_CPU_RST (1<<4)
-+#define RALINK_UART_RST (1<<5)
-+#define RALINK_PIO_RST (1<<6)
-+#define RALINK_I2C_RST (1<<9)
-+#define RALINK_SPI_RST (1<<11)
-+#define RALINK_UART2_RST (1<<12)
-+#define RALINK_PCI_RST (1<<16)
-+#define RALINK_2860_RST (1<<17)
-+#define RALINK_FE_RST (1<<18)
-+#define RALINK_PCM_RST (1<<19)
-+
-+#elif defined (CONFIG_RALINK_RT3052)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_PCM_BASE 0xB0000400
-+#define RALINK_UART_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_GDMA_BASE 0xB0000700
-+#define RALINK_NAND_CTRL_BASE 0xB0000800
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_UART_LITE_BASE 0x10000C00
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_ETH_SW_BASE 0xB0110000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_OTG_BASE 0x101C0000
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_NAND (1<<8)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_ESW (1<<17)
-+#define RALINK_INTCTL_OTG (1<<18)
-+#define RALINK_INTCTL_OTG_IRQN 18
-+#define RALINK_INTCTL_GLOBAL (1<<31)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_CPU_RST (1<<1)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_RT2872_RST (1<<20)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_OTG_RST (1<<22)
-+#define RALINK_SW_RST (1<<23)
-+#define RALINK_EPHY_RST (1<<24)
-+
-+#elif defined (CONFIG_RALINK_RT3352)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_UART_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_NAND_CTRL_BASE 0xB0000800
-+#define RALINK_UART_LITE_BASE 0x10000C00
-+#define RALINK_PCM_BASE 0xB0002000
-+#define RALINK_GDMA_BASE 0xB0002800
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_ETH_SW_BASE 0xB0110000
-+#define RALINK_USB_DEV_BASE 0x10120000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_HOST_BASE 0x101C0000
-+
-+#define RALINK_MCNT_CFG 0xB0000D00
-+#define RALINK_COMPARE 0xB0000D04
-+#define RALINK_COUNT 0xB0000D08
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_ESW (1<<17)
-+#define RALINK_INTCTL_OTG (1<<18)
-+#define RALINK_INTCTL_GLOBAL (1<<31)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_WLAN_RST (1<<20)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_UHST_RST (1<<22)
-+#define RALINK_ESW_RST (1<<23)
-+#define RALINK_EPHY_RST (1<<24)
-+#define RALINK_UDEV_RST (1<<25)
-+
-+
-+//Clock Conf Register
-+#define RALINK_UPHY1_CLK_EN (1<<20)
-+#define RALINK_UPHY0_CLK_EN (1<<18)
-+#define RALINK_GE1_CLK_EN (1<<16)
-+
-+
-+#elif defined (CONFIG_RALINK_RT5350)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_UART_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_UART_LITE_BASE 0x10000C00
-+#define RALINK_PCM_BASE 0xB0002000
-+#define RALINK_GDMA_BASE 0xB0002800
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_ETH_SW_BASE 0xB0110000
-+#define RALINK_USB_DEV_BASE 0x10120000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_HOST_BASE 0x101C0000
-+
-+#define RALINK_MCNT_CFG 0xB0000D00
-+#define RALINK_COMPARE 0xB0000D04
-+#define RALINK_COUNT 0xB0000D08
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_ESW (1<<17)
-+#define RALINK_INTCTL_USB_HOST (1<<18)
-+#define RALINK_INTCTL_USB_DEV (1<<19)
-+#define RALINK_INTCTL_GLOBAL (1<<31)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_WLAN_RST (1<<20)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_UHST_RST (1<<22)
-+#define RALINK_ESW_RST (1<<23)
-+#define RALINK_EPHY_RST (1<<24)
-+#define RALINK_UDEV_RST (1<<25)
-+#define RALINK_MIPSC_RST (1<<28)
-+
-+//Clock Conf Register
-+#define RALINK_UPHY0_CLK_EN (1<<18)
-+#define RALINK_GE1_CLK_EN (1<<16)
-+
-+#elif defined (CONFIG_RALINK_RT2883)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_PCM_BASE 0xB0000400
-+#define RALINK_UART_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_GDMA_BASE 0xB0000700
-+#define RALINK_NAND_CTRL_BASE 0xB0000800
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_UART_LITE_BASE 0x10000C00
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_PCI_BASE 0xB0140000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_OTG_BASE 0x101C0000
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_NAND (1<<8)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_OTG (1<<18)
-+#define RALINK_INTCTL_OTG_IRQN 18
-+#define RALINK_INTCTL_GLOBAL (1<<31)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_CPU_RST (1<<1)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_WLAN_RST (1<<20)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_OTG_RST (1<<22)
-+#define RALINK_PCIE_RST (1<<23)
-+
-+#elif defined (CONFIG_RALINK_RT3883)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_UART_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_NOR_CTRL_BASE 0xB0000700
-+#define RALINK_NAND_CTRL_BASE 0xB0000810
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_UART_LITE_BASE 0x10000C00
-+#define RALINK_PCM_BASE 0xB0002000
-+#define RALINK_GDMA_BASE 0xB0002800
-+#define RALINK_CODEC1_BASE 0xB0003000
-+#define RALINK_CODEC2_BASE 0xB0003800
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_USB_DEV_BASE 0x10120000
-+#define RALINK_PCI_BASE 0xB0140000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_HOST_BASE 0x101C0000
-+#define RALINK_PCIE_BASE 0xB0200000
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_NAND (1<<8)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_UHST (1<<18)
-+#define RALINK_INTCTL_UDEV (1<<19)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_NAND_RST (1<<15)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_WLAN_RST (1<<20)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_UHST_RST (1<<22)
-+#define RALINK_PCIE_RST (1<<23)
-+#define RALINK_PCI_RST (1<<24)
-+#define RALINK_UDEV_RST (1<<25)
-+#define RALINK_FLASH_RST (1<<26)
-+
-+//Clock Conf Register
-+#define RALINK_UPHY1_CLK_EN (1<<20)
-+#define RALINK_UPHY0_CLK_EN (1<<18)
-+#define RALINK_GE1_CLK_EN (1<<16)
-+
-+#elif defined (CONFIG_RALINK_RT6855)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_UART_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_NAND_CTRL_BASE 0xB0000800
-+#define RALINK_UART_LITE_BASE 0x10000C00
-+#define RALINK_PCM_BASE 0xB0002000
-+#define RALINK_GDMA_BASE 0xB0002800
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_ETH_SW_BASE 0xB0110000
-+#define RALINK_PCI_BASE 0xB0140000
-+#define RALINK_USB_DEV_BASE 0x10120000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_HOST_BASE 0x101C0000
-+
-+#define RALINK_MCNT_CFG 0xB0000D00
-+#define RALINK_COMPARE 0xB0000D04
-+#define RALINK_COUNT 0xB0000D08
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_ESW (1<<17)
-+#define RALINK_INTCTL_OTG (1<<18)
-+#define RALINK_INTCTL_GLOBAL (1<<31)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_UHST_RST (1<<22)
-+#define RALINK_ESW_RST (1<<23)
-+#define RALINK_EPHY_RST (1<<24)
-+#define RALINK_UDEV_RST (1<<25)
-+#define RALINK_PCIE0_RST (1<<26)
-+#define RALINK_PCIE1_RST (1<<27)
-+
-+//Clock Conf Register
-+#define RALINK_UPHY0_CLK_EN (1<<25)
-+#define RALINK_PCIE0_CLK_EN (1<<26)
-+#define RALINK_PCIE1_CLK_EN (1<<27)
-+
-+
-+#elif defined (CONFIG_RALINK_MT7620)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_RBUS_MATRIXCTL_BASE 0xB0000400
-+#define RALINK_UART_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_NAND_CTRL_BASE 0xB0000810
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_UART_LITE_BASE 0x10000C00
-+#define RALINK_MIPS_CNT_BASE 0x10000D00
-+#define RALINK_PCM_BASE 0xB0002000
-+#define RALINK_GDMA_BASE 0xB0002800
-+#define RALINK_CRYPTO_ENGINE_BASE 0xB0004000
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_PPE_BASE 0xB0100C00
-+#define RALINK_ETH_SW_BASE 0xB0110000
-+#define RALINK_USB_DEV_BASE 0x10120000
-+#define RALINK_MSDC_BASE 0xB0130000
-+#define RALINK_PCI_BASE 0xB0140000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_HOST_BASE 0x101C0000
-+
-+#define RALINK_MCNT_CFG 0xB0000D00
-+#define RALINK_COMPARE 0xB0000D04
-+#define RALINK_COUNT 0xB0000D08
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_SPI (1<<11)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_CRYPTO (1<<13)
-+#define RALINK_INTCTL_ESW (1<<17)
-+#define RALINK_INTCTL_UHST (1<<18)
-+#define RALINK_INTCTL_UDEV (1<<19)
-+#define RALINK_INTCTL_GLOBAL (1<<31)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_UHST_RST (1<<22)
-+#define RALINK_ESW_RST (1<<23)
-+#define RALINK_EPHY_RST (1<<24)
-+#define RALINK_UDEV_RST (1<<25)
-+#define RALINK_PCIE0_RST (1<<26)
-+#define RALINK_PCIE1_RST (1<<27)
-+#define RALINK_MIPS_CNT_RST (1<<28)
-+#define RALINK_CRYPTO_RST (1<<29)
-+
-+//Clock Conf Register
-+#define RALINK_UPHY0_CLK_EN (1<<25)
-+#define RALINK_UPHY1_CLK_EN (1<<22)
-+#define RALINK_PCIE0_CLK_EN (1<<26)
-+#define RALINK_PCIE1_CLK_EN (1<<27)
-+
-+//CPU PLL CFG Register
-+#define CPLL_SW_CONFIG (0x1UL << 31)
-+#define CPLL_MULT_RATIO_SHIFT 16
-+#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT)
-+#define CPLL_DIV_RATIO_SHIFT 10
-+#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT)
-+#define BASE_CLOCK 40 /* Mhz */
-+
-+#elif defined (CONFIG_RALINK_MT7621)
-+
-+#define RALINK_SYSCTL_BASE 0xBE000000
-+#define RALINK_TIMER_BASE 0xBE000100
-+#define RALINK_INTCL_BASE 0xBE000200
-+#define RALINK_RBUS_MATRIXCTL_BASE 0xBE000400
-+#define RALINK_MIPS_CNT_BASE 0x1E000500
-+#define RALINK_PIO_BASE 0xBE000600
-+#define RALINK_SPDIF_BASE 0xBE000700
-+#define RALINK_I2C_BASE 0xBE000900
-+#define RALINK_I2S_BASE 0xBE000A00
-+#define RALINK_SPI_BASE 0xBE000B00
-+#define RALINK_UART_LITE1_BASE 0x1E000C00
-+#define RALINK_UART_LITE_BASE RALINK_UART_LITE1_BASE
-+#define RALINK_UART_LITE2_BASE 0x1E000D00
-+#define RALINK_UART_BASE RALINK_UART_LITE2_BASE
-+#define RALINK_UART_LITE3_BASE 0x1E000E00
-+#define RALINK_ANA_CTRL_BASE 0xBE000F00
-+#define RALINK_PCM_BASE 0xBE002000
-+#define RALINK_GDMA_BASE 0xBE002800
-+#define RALINK_NAND_CTRL_BASE 0xBE003000
-+#define RALINK_NANDECC_CTRL_BASE 0xBE003800
-+#define RALINK_CRYPTO_ENGINE_BASE 0xBE004000
-+#define RALINK_MEMCTRL_BASE 0xBE005000
-+#define RALINK_EXT_MC_ARB_BASE 0xBE006000
-+#define RALINK_HS_DMA_BASE 0xBE007000
-+#define RALINK_FRAME_ENGINE_BASE 0xBE100000
-+#define RALINK_PPE_BASE 0xBE100C00
-+#define RALINK_ETH_SW_BASE 0xBE110000
-+#define RALINK_ROM_BASE 0xBE118000
-+#define RALINK_MSDC_BASE 0xBE130000
-+#define RALINK_PCI_BASE 0xBE140000
-+#define RALINK_USB_HOST_BASE 0x1E1C0000
-+#define RALINK_11N_MAC_BASE 0xBE180000 //Unused
-+
-+#define RALINK_MCNT_CFG 0xBE000500
-+#define RALINK_COMPARE 0xBE000504
-+#define RALINK_COUNT 0xBE000508
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_FE (1<<3)
-+#define RALINK_INTCTL_PCIE0 (1<<4)
-+#define RALINK_INTCTL_SYSCTL (1<<6)
-+#define RALINK_INTCTL_I2C (1<<8)
-+#define RALINK_INTCTL_DRAMC (1<<9)
-+#define RALINK_INTCTL_PCM (1<<10)
-+#define RALINK_INTCTL_HSDMA (1<<11)
-+#define RALINK_INTCTL_PIO (1<<12)
-+#define RALINK_INTCTL_DMA (1<<13)
-+#define RALINK_INTCTL_NFI (1<<14)
-+#define RALINK_INTCTL_NFIECC (1<<15)
-+#define RALINK_INTCTL_I2S (1<<16)
-+#define RALINK_INTCTL_SPI (1<<17)
-+#define RALINK_INTCTL_SPDIF (1<<18)
-+#define RALINK_INTCTL_CRYPTO (1<<19)
-+#define RALINK_INTCTL_SDXC (1<<20)
-+#define RALINK_INTCTL_PCTRL (1<<21)
-+#define RALINK_INTCTL_USB (1<<22)
-+#define RALINK_INTCTL_SWITCH (1<<23)
-+#define RALINK_INTCTL_PCIE1 (1<<24)
-+#define RALINK_INTCTL_PCIE2 (1<<25)
-+#define RALINK_INTCTL_UART1 (1<<26)
-+#define RALINK_INTCTL_UART2 (1<<27)
-+#define RALINK_INTCTL_UART3 (1<<28)
-+#define RALINK_INTCTL_WDTIMER (1<<29)
-+#define RALINK_INTCTL_TIMER0 (1<<30)
-+#define RALINK_INTCTL_TIMER1 (1<<31)
-+
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_MCM_RST (1<<1)
-+#define RALINK_HSDMA_RST (1<<2)
-+#define RALINK_FE_RST (1<<6)
-+#define RALINK_SPDIF_RST (1<<7)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_NAND_RST (1<<15)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UART1_RST (1<<19)
-+#define RALINK_UART2_RST (1<<20)
-+#define RALINK_UART3_RST (1<<21)
-+#define RALINK_ETH_RST (1<<23)
-+#define RALINK_PCIE0_RST (1<<24)
-+#define RALINK_PCIE1_RST (1<<25)
-+#define RALINK_PCIE2_RST (1<<26)
-+#define RALINK_AUX_STCK_RST (1<<28)
-+#define RALINK_CRYPTO_RST (1<<29)
-+#define RALINK_SDXC_RST (1<<30)
-+#define RALINK_PPE_RST (1<<31)
-+
-+//Clock Conf Register
-+#define RALINK_PCIE0_CLK_EN (1<<24)
-+#define RALINK_PCIE1_CLK_EN (1<<25)
-+#define RALINK_PCIE2_CLK_EN (1<<26)
-+//#define RALINK_UPHY0_CLK_EN (1<<27)
-+//#define RALINK_UPHY1_CLK_EN (1<<28)
-+
-+//CPU PLL CFG Register
-+#define CPLL_SW_CONFIG (0x1UL << 31)
-+#define CPLL_MULT_RATIO_SHIFT 16
-+#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT)
-+#define CPLL_DIV_RATIO_SHIFT 10
-+#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT)
-+#define BASE_CLOCK 40 /* Mhz */
-+
-+#define RALINK_TESTSTAT 0xBE000018
-+#define RALINK_TESTSTAT2 0xBE00001C
-+
-+#elif defined (CONFIG_RALINK_MT7628)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_RBUS_MATRIXCTL_BASE 0xB0000400
-+#define RALINK_MIPS_CNT_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_SPI_SLAVE_BASE 0xB0000700
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_UART_LITE1_BASE 0x10000C00
-+#define RALINK_UART_LITE_BASE RALINK_UART_LITE1_BASE
-+#define RALINK_UART_LITE2_BASE 0x10000D00
-+#define RALINK_UART_BASE RALINK_UART_LITE2_BASE
-+#define RALINK_UART_LITE3_BASE 0x10000E00
-+#define RALINK_PCM_BASE 0xB0002000
-+#define RALINK_GDMA_BASE 0xB0002800
-+#define RALINK_AES_ENGINE_BASE 0xB0004000
-+#define RALINK_CRYPTO_ENGINE_BASE RALINK_AES_ENGINE_BASE
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_PPE_BASE 0xB0100C00
-+#define RALINK_ETH_SW_BASE 0xB0110000
-+#define RALINK_USB_DEV_BASE 0xB0120000
-+#define RALINK_MSDC_BASE 0xB0130000
-+#define RALINK_PCI_BASE 0xB0140000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_HOST_BASE 0x101C0000
-+
-+#define RALINK_MCNT_CFG 0xB0000500
-+#define RALINK_COMPARE 0xB0000504
-+#define RALINK_COUNT 0xB0000508
-+
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_SPI (1<<11)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_CRYPTO (1<<13)
-+#define RALINK_INTCTL_ESW (1<<17)
-+#define RALINK_INTCTL_UHST (1<<18)
-+#define RALINK_INTCTL_UDEV (1<<19)
-+#define RALINK_INTCTL_GLOBAL (1<<31)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_UHST_RST (1<<22)
-+#define RALINK_ESW_RST (1<<23)
-+#define RALINK_EPHY_RST (1<<24)
-+#define RALINK_UDEV_RST (1<<25)
-+#define RALINK_PCIE0_RST (1<<26)
-+#define RALINK_PCIE1_RST (1<<27)
-+#define RALINK_MIPS_CNT_RST (1<<28)
-+#define RALINK_CRYPTO_RST (1<<29)
-+
-+//Clock Conf Register
-+#define RALINK_UPHY0_CLK_EN (1<<25)
-+#define RALINK_UPHY1_CLK_EN (1<<22)
-+#define RALINK_PCIE0_CLK_EN (1<<26)
-+#define RALINK_PCIE1_CLK_EN (1<<27)
-+
-+//CPU PLL CFG Register
-+#define CPLL_SW_CONFIG (0x1UL << 31)
-+#define CPLL_MULT_RATIO_SHIFT 16
-+#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT)
-+#define CPLL_DIV_RATIO_SHIFT 10
-+#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT)
-+#define BASE_CLOCK 40 /* Mhz */
-+
-+#endif
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/serial_rt2880.h
-@@ -0,0 +1,443 @@
-+/**************************************************************************
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ * serial port definition for Ralink RT2880 solution
-+ *
-+ * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw)
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2007 Bruce Chang
-+ *
-+ * Initial Release
-+ *
-+ *
-+ *
-+ **************************************************************************
-+ */
-+
-+#if defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
-+#define RT2880_UART_RBR_OFFSET 0x00
-+#define RT2880_UART_TBR_OFFSET 0x00
-+#define RT2880_UART_IER_OFFSET 0x04
-+#define RT2880_UART_IIR_OFFSET 0x08
-+#define RT2880_UART_FCR_OFFSET 0x08
-+#define RT2880_UART_LCR_OFFSET 0x0C
-+#define RT2880_UART_MCR_OFFSET 0x10
-+#define RT2880_UART_LSR_OFFSET 0x14
-+#define RT2880_UART_DLL_OFFSET 0x00
-+#define RT2880_UART_DLM_OFFSET 0x04
-+#else
-+#define RT2880_UART_RBR_OFFSET 0x00
-+#define RT2880_UART_TBR_OFFSET 0x04
-+#define RT2880_UART_IER_OFFSET 0x08
-+#define RT2880_UART_IIR_OFFSET 0x0C
-+#define RT2880_UART_FCR_OFFSET 0x10
-+#define RT2880_UART_LCR_OFFSET 0x14
-+#define RT2880_UART_MCR_OFFSET 0x18
-+#define RT2880_UART_LSR_OFFSET 0x1C
-+#define RT2880_UART_DLL_OFFSET 0x2C
-+#define RT2880_UART_DLM_OFFSET 0x30
-+#endif
-+
-+#define RBR(x) *(volatile u32 *)((x)+RT2880_UART_RBR_OFFSET)
-+#define TBR(x) *(volatile u32 *)((x)+RT2880_UART_TBR_OFFSET)
-+#define IER(x) *(volatile u32 *)((x)+RT2880_UART_IER_OFFSET)
-+#define IIR(x) *(volatile u32 *)((x)+RT2880_UART_IIR_OFFSET)
-+#define FCR(x) *(volatile u32 *)((x)+RT2880_UART_FCR_OFFSET)
-+#define LCR(x) *(volatile u32 *)((x)+RT2880_UART_LCR_OFFSET)
-+#define MCR(x) *(volatile u32 *)((x)+RT2880_UART_MCR_OFFSET)
-+#define LSR(x) *(volatile u32 *)((x)+RT2880_UART_LSR_OFFSET)
-+#define DLL(x) *(volatile u32 *)((x)+RT2880_UART_DLL_OFFSET)
-+#define DLM(x) *(volatile u32 *)((x)+RT2880_UART_DLM_OFFSET)
-+
-+
-+#if defined (CONFIG_RALINK_RT2880) || \
-+ defined (CONFIG_RALINK_RT2883) || \
-+ defined (CONFIG_RALINK_RT3883) || \
-+ defined (CONFIG_RALINK_RT3352) || \
-+ defined (CONFIG_RALINK_RT5350) || \
-+ defined (CONFIG_RALINK_RT6855) || \
-+ defined (CONFIG_RALINK_MT7620) || \
-+ defined (CONFIG_RALINK_RT3052)
-+
-+#define UART_RX 0 /* In: Receive buffer (DLAB=0) */
-+
-+#define UART_TX 4 /* Out: Transmit buffer (DLAB=0) */
-+#define UART_TRG 4 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
-+ * In: Fifo count
-+ * Out: Fifo custom trigger levels
-+ * XR16C85x only
-+ */
-+
-+#define UART_IER 8 /* Out: Interrupt Enable Register */
-+#define UART_FCTR 8 /* (LCR=BF) Feature Control Register
-+ * XR16C85x only
-+ */
-+
-+#define UART_IIR 12 /* In: Interrupt ID Register */
-+#define UART_EFR 12 /* I/O: Extended Features Register */
-+ /* (DLAB=1, 16C660 only) */
-+
-+#define UART_FCR 16 /* Out: FIFO Control Register */
-+#define UART_LCR 20 /* Out: Line Control Register */
-+#define UART_MCR 24 /* Out: Modem Control Register */
-+#define UART_LSR 28 /* In: Line Status Register */
-+#define UART_MSR 32 /* In: Modem Status Register */
-+#define UART_SCR 36 /* I/O: Scratch Register */
-+#define UART_DLL 44 /* Out: Divisor Latch Low (DLAB=1) */
-+/* Since surfboard uart cannot be accessed by byte, using UART_DLM will cause
-+ * unpredictable values to be written to the Divisor Latch
-+ */
-+#define UART_DLM 48 /* Out: Divisor Latch High (DLAB=1) */
-+
-+#else
-+
-+#define UART_RX 0 /* In: Receive buffer */
-+#define UART_TX 0 /* Out: Transmit buffer */
-+#define UART_DLL 0 /* Out: Divisor Latch Low */
-+#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx
-+ * In: Fifo count
-+ * Out: Fifo custom trigger levels */
-+
-+#define UART_DLM 4 /* Out: Divisor Latch High */
-+#define UART_IER 4 /* Out: Interrupt Enable Register */
-+#define UART_FCTR 4 /* Feature Control Register */
-+
-+#define UART_IIR 8 /* In: Interrupt ID Register */
-+#define UART_FCR 8 /* Out: FIFO Control Register */
-+#define UART_EFR 8 /* I/O: Extended Features Register */
-+
-+#define UART_LCR 12 /* Out: Line Control Register */
-+#define UART_MCR 16 /* Out: Modem Control Register */
-+#define UART_LSR 20 /* In: Line Status Register */
-+#define UART_MSR 24 /* In: Modem Status Register */
-+#define UART_SCR 28 /* I/O: Scratch Register */
-+#define UART_EMSR 28 /* Extended Mode Select Register */
-+
-+#endif
-+/*
-+ * DLAB=0
-+ */
-+//#define UART_IER 1 /* Out: Interrupt Enable Register */
-+#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
-+#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
-+#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
-+#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
-+/*
-+ * Sleep mode for ST16650 and TI16750. For the ST16650, EFR[4]=1
-+ */
-+#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */
-+
-+//#define UART_IIR 2 /* In: Interrupt ID Register */
-+#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
-+#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
-+#define UART_IIR_MSI 0x00 /* Modem status interrupt */
-+#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
-+#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
-+#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
-+
-+//#define UART_FCR 2 /* Out: FIFO Control Register */
-+#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
-+#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
-+#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
-+#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
-+/*
-+ * Note: The FIFO trigger levels are chip specific:
-+ * RX:76 = 00 01 10 11 TX:54 = 00 01 10 11
-+ * PC16550D: 1 4 8 14 xx xx xx xx
-+ * TI16C550A: 1 4 8 14 xx xx xx xx
-+ * TI16C550C: 1 4 8 14 xx xx xx xx
-+ * ST16C550: 1 4 8 14 xx xx xx xx
-+ * ST16C650: 8 16 24 28 16 8 24 30 PORT_16650V2
-+ * NS16C552: 1 4 8 14 xx xx xx xx
-+ * ST16C654: 8 16 56 60 8 16 32 56 PORT_16654
-+ * TI16C750: 1 16 32 56 xx xx xx xx PORT_16750
-+ * TI16C752: 8 16 56 60 8 16 32 56
-+ */
-+#define UART_FCR_R_TRIG_00 0x00
-+#define UART_FCR_R_TRIG_01 0x40
-+#define UART_FCR_R_TRIG_10 0x80
-+#define UART_FCR_R_TRIG_11 0xc0
-+#define UART_FCR_T_TRIG_00 0x00
-+#define UART_FCR_T_TRIG_01 0x10
-+#define UART_FCR_T_TRIG_10 0x20
-+#define UART_FCR_T_TRIG_11 0x30
-+
-+#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
-+#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
-+#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
-+#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
-+#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
-+/* 16650 definitions */
-+#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */
-+#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */
-+#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */
-+#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */
-+#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */
-+#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */
-+#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */
-+#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */
-+#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */
-+
-+//#define UART_LCR 3 /* Out: Line Control Register */
-+/*
-+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
-+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
-+ */
-+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
-+#define UART_LCR_SBC 0x40 /* Set break control */
-+#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
-+#define UART_LCR_EPAR 0x10 /* Even parity select */
-+#define UART_LCR_PARITY 0x08 /* Parity Enable */
-+#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 bit, 1=2 bits */
-+#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
-+#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
-+#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
-+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
-+
-+//#define UART_MCR 4 /* Out: Modem Control Register */
-+#define UART_MCR_CLKSEL 0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */
-+#define UART_MCR_TCRTLR 0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */
-+#define UART_MCR_XONANY 0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */
-+#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */
-+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
-+#define UART_MCR_OUT2 0x08 /* Out2 complement */
-+#define UART_MCR_OUT1 0x04 /* Out1 complement */
-+#define UART_MCR_RTS 0x02 /* RTS complement */
-+#define UART_MCR_DTR 0x01 /* DTR complement */
-+
-+//#define UART_LSR 5 /* In: Line Status Register */
-+#define UART_LSR_TEMT 0x40 /* Transmitter empty */
-+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
-+#define UART_LSR_BI 0x10 /* Break interrupt indicator */
-+#define UART_LSR_FE 0x08 /* Frame error indicator */
-+#define UART_LSR_PE 0x04 /* Parity error indicator */
-+#define UART_LSR_OE 0x02 /* Overrun error indicator */
-+#define UART_LSR_DR 0x01 /* Receiver data ready */
-+
-+//#define UART_MSR 6 /* In: Modem Status Register */
-+#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
-+#define UART_MSR_RI 0x40 /* Ring Indicator */
-+#define UART_MSR_DSR 0x20 /* Data Set Ready */
-+#define UART_MSR_CTS 0x10 /* Clear to Send */
-+#define UART_MSR_DDCD 0x08 /* Delta DCD */
-+#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
-+#define UART_MSR_DDSR 0x02 /* Delta DSR */
-+#define UART_MSR_DCTS 0x01 /* Delta CTS */
-+#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
-+
-+//#define UART_SCR 7 /* I/O: Scratch Register */
-+
-+/*
-+ * DLAB=1
-+ */
-+//#define UART_DLL 0 /* Out: Divisor Latch Low */
-+//#define UART_DLM 1 /* Out: Divisor Latch High */
-+
-+/*
-+ * LCR=0xBF (or DLAB=1 for 16C660)
-+ */
-+//#define UART_EFR 2 /* I/O: Extended Features Register */
-+#define UART_EFR_CTS 0x80 /* CTS flow control */
-+#define UART_EFR_RTS 0x40 /* RTS flow control */
-+#define UART_EFR_SCD 0x20 /* Special character detect */
-+#define UART_EFR_ECB 0x10 /* Enhanced control bit */
-+/*
-+ * the low four bits control software flow control
-+ */
-+
-+/*
-+ * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654
-+ */
-+#define UART_XON1 4 /* I/O: Xon character 1 */
-+#define UART_XON2 5 /* I/O: Xon character 2 */
-+#define UART_XOFF1 6 /* I/O: Xoff character 1 */
-+#define UART_XOFF2 7 /* I/O: Xoff character 2 */
-+
-+/*
-+ * EFR[4]=1 MCR[6]=1, TI16C752
-+ */
-+#define UART_TI752_TCR 6 /* I/O: transmission control register */
-+#define UART_TI752_TLR 7 /* I/O: trigger level register */
-+
-+/*
-+ * LCR=0xBF, XR16C85x
-+ */
-+//#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx
-+// * In: Fifo count
-+// * Out: Fifo custom trigger levels */
-+/*
-+ * These are the definitions for the Programmable Trigger Register
-+ */
-+#define UART_TRG_1 0x01
-+#define UART_TRG_4 0x04
-+#define UART_TRG_8 0x08
-+#define UART_TRG_16 0x10
-+#define UART_TRG_32 0x20
-+#define UART_TRG_64 0x40
-+#define UART_TRG_96 0x60
-+#define UART_TRG_120 0x78
-+#define UART_TRG_128 0x80
-+
-+//#define UART_FCTR 1 /* Feature Control Register */
-+#define UART_FCTR_RTS_NODELAY 0x00 /* RTS flow control delay */
-+#define UART_FCTR_RTS_4DELAY 0x01
-+#define UART_FCTR_RTS_6DELAY 0x02
-+#define UART_FCTR_RTS_8DELAY 0x03
-+#define UART_FCTR_IRDA 0x04 /* IrDa data encode select */
-+#define UART_FCTR_TX_INT 0x08 /* Tx interrupt type select */
-+#define UART_FCTR_TRGA 0x00 /* Tx/Rx 550 trigger table select */
-+#define UART_FCTR_TRGB 0x10 /* Tx/Rx 650 trigger table select */
-+#define UART_FCTR_TRGC 0x20 /* Tx/Rx 654 trigger table select */
-+#define UART_FCTR_TRGD 0x30 /* Tx/Rx 850 programmable trigger select */
-+#define UART_FCTR_SCR_SWAP 0x40 /* Scratch pad register swap */
-+#define UART_FCTR_RX 0x00 /* Programmable trigger mode select */
-+#define UART_FCTR_TX 0x80 /* Programmable trigger mode select */
-+
-+/*
-+ * LCR=0xBF, FCTR[6]=1
-+ */
-+//#define UART_EMSR 7 /* Extended Mode Select Register */
-+#define UART_EMSR_FIFO_COUNT 0x01 /* Rx/Tx select */
-+#define UART_EMSR_ALT_COUNT 0x02 /* Alternating count select */
-+
-+/*
-+ * The Intel XScale on-chip UARTs define these bits
-+ */
-+#define UART_IER_DMAE 0x80 /* DMA Requests Enable */
-+#define UART_IER_UUE 0x40 /* UART Unit Enable */
-+#define UART_IER_NRZE 0x20 /* NRZ coding Enable */
-+#define UART_IER_RTOIE 0x10 /* Receiver Time Out Interrupt Enable */
-+
-+#define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */
-+
-+#define UART_FCR_PXAR1 0x00 /* receive FIFO treshold = 1 */
-+#define UART_FCR_PXAR8 0x40 /* receive FIFO treshold = 8 */
-+#define UART_FCR_PXAR16 0x80 /* receive FIFO treshold = 16 */
-+#define UART_FCR_PXAR32 0xc0 /* receive FIFO treshold = 32 */
-+
-+
-+
-+
-+/*
-+ * These register definitions are for the 16C950
-+ */
-+#define UART_ASR 0x01 /* Additional Status Register */
-+#define UART_RFL 0x03 /* Receiver FIFO level */
-+#define UART_TFL 0x04 /* Transmitter FIFO level */
-+#define UART_ICR 0x05 /* Index Control Register */
-+
-+/* The 16950 ICR registers */
-+#define UART_ACR 0x00 /* Additional Control Register */
-+#define UART_CPR 0x01 /* Clock Prescalar Register */
-+#define UART_TCR 0x02 /* Times Clock Register */
-+#define UART_CKS 0x03 /* Clock Select Register */
-+#define UART_TTL 0x04 /* Transmitter Interrupt Trigger Level */
-+#define UART_RTL 0x05 /* Receiver Interrupt Trigger Level */
-+#define UART_FCL 0x06 /* Flow Control Level Lower */
-+#define UART_FCH 0x07 /* Flow Control Level Higher */
-+#define UART_ID1 0x08 /* ID #1 */
-+#define UART_ID2 0x09 /* ID #2 */
-+#define UART_ID3 0x0A /* ID #3 */
-+#define UART_REV 0x0B /* Revision */
-+#define UART_CSR 0x0C /* Channel Software Reset */
-+#define UART_NMR 0x0D /* Nine-bit Mode Register */
-+#define UART_CTR 0xFF
-+
-+/*
-+ * The 16C950 Additional Control Reigster
-+ */
-+#define UART_ACR_RXDIS 0x01 /* Receiver disable */
-+#define UART_ACR_TXDIS 0x02 /* Receiver disable */
-+#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */
-+#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */
-+#define UART_ACR_ICRRD 0x40 /* ICR Read enable */
-+#define UART_ACR_ASREN 0x80 /* Additional status enable */
-+
-+
-+
-+/*
-+ * These definitions are for the RSA-DV II/S card, from
-+ *
-+ * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
-+ */
-+
-+#define UART_RSA_BASE (-8)
-+
-+#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */
-+
-+#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */
-+#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */
-+#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */
-+#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */
-+
-+#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */
-+
-+#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */
-+#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */
-+#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */
-+#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */
-+#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */
-+
-+#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */
-+
-+#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */
-+#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */
-+#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */
-+#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */
-+#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */
-+#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */
-+#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */
-+#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */
-+
-+#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */
-+
-+#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */
-+
-+#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */
-+
-+#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */
-+
-+/*
-+ * The RSA DSV/II board has two fixed clock frequencies. One is the
-+ * standard rate, and the other is 8 times faster.
-+ */
-+#define SERIAL_RSA_BAUD_BASE (921600)
-+#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
-+
-+/*
-+ * Extra serial register definitions for the internal UARTs
-+ * in TI OMAP processors.
-+ */
-+#define UART_OMAP_MDR1 0x08 /* Mode definition register */
-+#define UART_OMAP_MDR2 0x09 /* Mode definition register 2 */
-+#define UART_OMAP_SCR 0x10 /* Supplementary control register */
-+#define UART_OMAP_SSR 0x11 /* Supplementary status register */
-+#define UART_OMAP_EBLR 0x12 /* BOF length register */
-+#define UART_OMAP_OSC_12M_SEL 0x13 /* OMAP1510 12MHz osc select */
-+#define UART_OMAP_MVER 0x14 /* Module version register */
-+#define UART_OMAP_SYSC 0x15 /* System configuration register */
-+#define UART_OMAP_SYSS 0x16 /* System status register */
-+
-+
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/sizes.h
-@@ -0,0 +1,52 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+/* DO NOT EDIT!! - this file automatically generated
-+ * from .s file by awk -f s2h.awk
-+ */
-+/* Size definitions
-+ * Copyright (C) ARM Limited 1998. All rights reserved.
-+ */
-+
-+#ifndef __sizes_h
-+#define __sizes_h 1
-+
-+/* handy sizes */
-+#define SZ_1K 0x00000400
-+#define SZ_4K 0x00001000
-+#define SZ_8K 0x00002000
-+#define SZ_16K 0x00004000
-+#define SZ_64K 0x00010000
-+#define SZ_128K 0x00020000
-+#define SZ_256K 0x00040000
-+#define SZ_512K 0x00080000
-+
-+#define SZ_1M 0x00100000
-+#define SZ_2M 0x00200000
-+#define SZ_4M 0x00400000
-+#define SZ_8M 0x00800000
-+#define SZ_16M 0x01000000
-+#define SZ_32M 0x02000000
-+#define SZ_64M 0x04000000
-+#define SZ_128M 0x08000000
-+#define SZ_256M 0x10000000
-+#define SZ_512M 0x20000000
-+
-+#define SZ_1G 0x40000000
-+#define SZ_2G 0x80000000
-+
-+#endif
-+
-+/* END */
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/surfboard.h
-@@ -0,0 +1,70 @@
-+/*
-+ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ */
-+#ifndef _SURFBOARD_H
-+#define _SURFBOARD_H
-+
-+#include <asm/addrspace.h>
-+
-+
-+
-+/*
-+ * Surfboard system clock.
-+ * This is the default value and maybe overidden by System Clock passed on the
-+ * command line (sysclk=).
-+ */
-+#define SURFBOARD_SYSTEM_CLOCK (125000000)
-+
-+/*
-+ * Surfboard UART base baud rate = System Clock / 16.
-+ * Ex. (14.7456 MHZ / 16) = 921600
-+ * (32.0000 MHZ / 16) = 2000000
-+ */
-+#define SURFBOARD_BAUD_DIV (16)
-+#define SURFBOARD_BASE_BAUD (SURFBOARD_SYSTEM_CLOCK / SURFBOARD_BAUD_DIV)
-+
-+/*
-+ * Maximum number of IDE Controllers
-+ * Surfboard only has one ide (ide0), so only 2 drives are
-+ * possible. (no need to check for more hwifs.)
-+ */
-+//#define MAX_IDE_HWIFS (1) /* Surfboard/Wakeboard */
-+#define MAX_IDE_HWIFS (2) /* Graphite board */
-+
-+#define GCMP_BASE_ADDR 0x1fbf8000
-+#define GCMP_ADDRSPACE_SZ (256 * 1024)
-+
-+/*
-+ * * GIC Specific definitions
-+ * */
-+#define GIC_BASE_ADDR 0x1fbc0000
-+#define GIC_ADDRSPACE_SZ (128 * 1024)
-+#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE)
-+
-+/* GIC's Nomenclature for Core Interrupt Pins */
-+#define GIC_CPU_INT0 0 /* Core Interrupt 2 */
-+#define GIC_CPU_INT1 1 /* . */
-+#define GIC_CPU_INT2 2 /* . */
-+#define GIC_CPU_INT3 3 /* . */
-+#define GIC_CPU_INT4 4 /* . */
-+#define GIC_CPU_INT5 5 /* Core Interrupt 5 */
-+
-+#endif /* !(_SURFBOARD_H) */
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/surfboardint.h
-@@ -0,0 +1,190 @@
-+/*
-+ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * Defines for the Surfboard interrupt controller.
-+ *
-+ */
-+#ifndef _SURFBOARDINT_H
-+#define _SURFBOARDINT_H
-+
-+/* Number of IRQ supported on hw interrupt 0. */
-+#if defined (CONFIG_RALINK_RT2880)
-+#define RALINK_CPU_TIMER_IRQ 6 /* mips timer */
-+#define SURFBOARDINT_GPIO 7 /* GPIO */
-+#define SURFBOARDINT_UART1 8 /* UART Lite */
-+#define SURFBOARDINT_UART 9 /* UART */
-+#define SURFBOARDINT_TIMER0 10 /* timer0 */
-+#elif defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT2883) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_MT7620)
-+#define RALINK_CPU_TIMER_IRQ 5 /* mips timer */
-+#define SURFBOARDINT_GPIO 6 /* GPIO */
-+#define SURFBOARDINT_DMA 7 /* DMA */
-+#define SURFBOARDINT_NAND 8 /* NAND */
-+#define SURFBOARDINT_PC 9 /* Performance counter */
-+#define SURFBOARDINT_I2S 10 /* I2S */
-+#define SURFBOARDINT_SDXC 14 /* SDXC */
-+#define SURFBOARDINT_ESW 17 /* ESW */
-+#define SURFBOARDINT_UART1 12 /* UART Lite */
-+#define SURFBOARDINT_CRYPTO 13 /* CryptoEngine */
-+#define SURFBOARDINT_SYSCTL 32 /* SYSCTL */
-+#define SURFBOARDINT_TIMER0 33 /* timer0 */
-+#define SURFBOARDINT_WDG 34 /* watch dog */
-+#define SURFBOARDINT_ILL_ACC 35 /* illegal access */
-+#define SURFBOARDINT_PCM 36 /* PCM */
-+#define SURFBOARDINT_UART 37 /* UART */
-+#define RALINK_INT_PCIE0 13 /* PCIE0 */
-+#define RALINK_INT_PCIE1 14 /* PCIE1 */
-+
-+
-+#elif defined (CONFIG_RALINK_MT7628)
-+#define SURFBOARDINT_SYSCTL 0 /* SYSCTL */
-+#define SURFBOARDINT_PCM 4 /* PCM */
-+#define SURFBOARDINT_GPIO 6 /* GPIO */
-+#define SURFBOARDINT_DMA 7 /* DMA */
-+#define SURFBOARDINT_PC 9 /* Performance counter */
-+#define SURFBOARDINT_I2S 10 /* I2S */
-+#define SURFBOARDINT_SPI 11 /* SPI */
-+#define SURFBOARDINT_AES 13 /* AES */
-+#define SURFBOARDINT_CRYPTO 13 /* CryptoEngine */
-+#define SURFBOARDINT_SDXC 14 /* SDXC */
-+#define SURFBOARDINT_ESW 17 /* ESW */
-+#define SURFBOARDINT_USB 18 /* USB */
-+#define SURFBOARDINT_UART_LITE1 20 /* UART Lite */
-+#define SURFBOARDINT_UART_LITE2 21 /* UART Lite */
-+#define SURFBOARDINT_UART_LITE3 22 /* UART Lite */
-+#define SURFBOARDINT_UART1 SURFBOARDINT_UART_LITE1
-+#define SURFBOARDINT_UART SURFBOARDINT_UART_LITE2
-+#define SURFBOARDINT_WDG 23 /* WDG timer */
-+#define SURFBOARDINT_TIMER0 24 /* Timer0 */
-+#define SURFBOARDINT_TIMER1 25 /* Timer1 */
-+#define SURFBOARDINT_ILL_ACC 35 /* illegal access */
-+#define RALINK_INT_PCIE0 2 /* PCIE0 */
-+
-+
-+#elif defined (CONFIG_RALINK_MT7621)
-+
-+#define SURFBOARDINT_FE 3 /* FE */
-+#define SURFBOARDINT_PCIE0 4 /* PCIE0 */
-+#define SURFBOARDINT_SYSCTL 6 /* SYSCTL */
-+#define SURFBOARDINT_I2C 8 /* I2C */
-+#define SURFBOARDINT_DRAMC 9 /* DRAMC */
-+#define SURFBOARDINT_PCM 10 /* PCM */
-+#define SURFBOARDINT_HSGDMA 11 /* HSGDMA */
-+#define SURFBOARDINT_GPIO 12 /* GPIO */
-+#define SURFBOARDINT_DMA 13 /* GDMA */
-+#define SURFBOARDINT_NAND 14 /* NAND */
-+#define SURFBOARDINT_NAND_ECC 15 /* NFI ECC */
-+#define SURFBOARDINT_I2S 16 /* I2S */
-+#define SURFBOARDINT_SPI 17 /* SPI */
-+#define SURFBOARDINT_SPDIF 18 /* SPDIF */
-+#define SURFBOARDINT_CRYPTO 19 /* CryptoEngine */
-+#define SURFBOARDINT_SDXC 20 /* SDXC */
-+#define SURFBOARDINT_PCTRL 21 /* Performance counter */
-+#define SURFBOARDINT_USB 22 /* USB */
-+#define SURFBOARDINT_ESW 31 /* Switch */
-+#define SURFBOARDINT_PCIE1 24 /* PCIE1 */
-+#define SURFBOARDINT_PCIE2 25 /* PCIE2 */
-+#define SURFBOARDINT_UART_LITE1 26 /* UART Lite */
-+#define SURFBOARDINT_UART_LITE2 27 /* UART Lite */
-+#define SURFBOARDINT_UART_LITE3 28 /* UART Lite */
-+#define SURFBOARDINT_UART SURFBOARDINT_UART_LITE2 //ttyS0
-+#define SURFBOARDINT_UART1 SURFBOARDINT_UART_LITE1 //ttyS1
-+
-+#define SURFBOARDINT_WDG 29 /* WDG timer */
-+#define SURFBOARDINT_TIMER0 30 /* Timer0 */
-+#define SURFBOARDINT_TIMER1 31 /* Timer1 */
-+
-+#define RALINK_INT_PCIE0 SURFBOARDINT_PCIE0
-+#define RALINK_INT_PCIE1 SURFBOARDINT_PCIE1
-+#define RALINK_INT_PCIE2 SURFBOARDINT_PCIE2
-+
-+#elif defined (CONFIG_RALINK_RT3883)
-+#define RALINK_CPU_TIMER_IRQ 5 /* mips timer */
-+#define SURFBOARDINT_GPIO 6 /* GPIO */
-+#define SURFBOARDINT_DMA 7 /* DMA */
-+#define SURFBOARDINT_NAND 8 /* NAND */
-+#define SURFBOARDINT_PC 9 /* Performance counter */
-+#define SURFBOARDINT_I2S 10 /* I2S */
-+#define SURFBOARDINT_UART1 12 /* UART Lite */
-+#define SURFBOARDINT_PCI 18 /* PCI */
-+#define SURFBOARDINT_UDEV 19 /* USB Device */
-+#define SURFBOARDINT_UHST 20 /* USB Host */
-+#define SURFBOARDINT_SYSCTL 32 /* SYSCTL */
-+#define SURFBOARDINT_TIMER0 33 /* timer0 */
-+#define SURFBOARDINT_ILL_ACC 35 /* illegal access */
-+#define SURFBOARDINT_PCM 36 /* PCM */
-+#define SURFBOARDINT_UART 37 /* UART */
-+#endif
-+
-+#define SURFBOARDINT_END 64
-+#define RT2880_INTERINT_START 40
-+
-+/* Global interrupt bit definitions */
-+#define C_SURFBOARD_GLOBAL_INT 31
-+#define M_SURFBOARD_GLOBAL_INT (1 << C_SURFBOARD_GLOBAL_INT)
-+
-+/* added ??? */
-+#define RALINK_SDRAM_ILL_ACC_ADDR *(volatile u32 *)(RALINK_SYSCTL_BASE + 0x310)
-+#define RALINK_SDRAM_ILL_ACC_TYPE *(volatile u32 *)(RALINK_SYSCTL_BASE + 0x314)
-+/* end of added, bobtseng */
-+
-+/*
-+ * Surfboard registers are memory mapped on 32-bit aligned boundaries and
-+ * only word access are allowed.
-+ */
-+#if defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
-+#define RALINK_IRQ0STAT (RALINK_INTCL_BASE + 0x9C) //IRQ_STAT
-+#define RALINK_IRQ1STAT (RALINK_INTCL_BASE + 0xA0) //FIQ_STAT
-+#define RALINK_INTTYPE (RALINK_INTCL_BASE + 0x6C) //FIQ_SEL
-+#define RALINK_INTRAW (RALINK_INTCL_BASE + 0xA4) //INT_PURE
-+#define RALINK_INTENA (RALINK_INTCL_BASE + 0x80) //IRQ_MASK_SET
-+#define RALINK_INTDIS (RALINK_INTCL_BASE + 0x78) //IRQ_MASK_CLR
-+#else
-+#define RALINK_IRQ0STAT (RALINK_INTCL_BASE + 0x0)
-+#define RALINK_IRQ1STAT (RALINK_INTCL_BASE + 0x4)
-+#define RALINK_INTTYPE (RALINK_INTCL_BASE + 0x20)
-+#define RALINK_INTRAW (RALINK_INTCL_BASE + 0x30)
-+#define RALINK_INTENA (RALINK_INTCL_BASE + 0x34)
-+#define RALINK_INTDIS (RALINK_INTCL_BASE + 0x38)
-+#endif
-+
-+/* bobtseng added ++, 2006.3.6. */
-+#define read_32bit_cp0_register(source) \
-+({ int __res; \
-+ __asm__ __volatile__( \
-+ ".set\tpush\n\t" \
-+ ".set\treorder\n\t" \
-+ "mfc0\t%0,"STR(source)"\n\t" \
-+ ".set\tpop" \
-+ : "=r" (__res)); \
-+ __res;})
-+
-+#define write_32bit_cp0_register(register,value) \
-+ __asm__ __volatile__( \
-+ "mtc0\t%0,"STR(register)"\n\t" \
-+ "nop" \
-+ : : "r" (value));
-+
-+/* bobtseng added --, 2006.3.6. */
-+
-+void surfboardint_init(void);
-+u32 get_surfboard_sysclk(void);
-+
-+
-+#endif /* !(_SURFBOARDINT_H) */
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/war.h
-@@ -0,0 +1,25 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
-+ */
-+#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
-+#define __ASM_MIPS_MACH_MIPS_WAR_H
-+
-+#define R4600_V1_INDEX_ICACHEOP_WAR 0
-+#define R4600_V1_HIT_CACHEOP_WAR 0
-+#define R4600_V2_HIT_CACHEOP_WAR 0
-+#define R5432_CP0_INTERRUPT_WAR 0
-+#define BCM1250_M3_WAR 0
-+#define SIBYTE_1956_WAR 0
-+#define MIPS4K_ICACHE_REFILL_WAR 1
-+#define MIPS_CACHE_SYNC_WAR 1
-+#define TX49XX_ICACHE_INDEX_INV_WAR 0
-+#define RM9000_CDEX_SMP_WAR 0
-+#define ICACHE_REFILLS_WORKAROUND_WAR 1
-+#define R10000_LLSC_WAR 0
-+#define MIPS34K_MISSED_ITLB_WAR 0
-+
-+#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -135,6 +135,7 @@ source "drivers/net/ethernet/packetengin
- source "drivers/net/ethernet/pasemi/Kconfig"
- source "drivers/net/ethernet/qlogic/Kconfig"
- source "drivers/net/ethernet/ralink/Kconfig"
-+source "drivers/net/ethernet/raeth/Kconfig"
- source "drivers/net/ethernet/realtek/Kconfig"
- source "drivers/net/ethernet/renesas/Kconfig"
- source "drivers/net/ethernet/rdc/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -57,6 +57,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
- obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
- obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
- obj-$(CONFIG_NET_RALINK) += ralink/
-+obj-$(CONFIG_RAETH) += raeth/
- obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
- obj-$(CONFIG_SH_ETH) += renesas/
- obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/Kconfig
-@@ -0,0 +1,344 @@
-+
-+config RA_NAT_NONE
-+ bool
-+ default y
-+ depends on RALINK
-+
-+config MT7621_ASIC
-+ bool
-+ default y
-+ depends on SOC_MT7621
-+
-+config RALINK_MT7621
-+ bool
-+ default y
-+ depends on SOC_MT7621
-+
-+config RAETH
-+ tristate "Ralink GMAC"
-+ depends on SOC_MT7621
-+ ---help---
-+ This driver supports Ralink gigabit ethernet family of
-+ adapters.
-+
-+config PDMA_NEW
-+ bool
-+ default y if (RALINK_MT7620 || RALINK_MT7621)
-+ depends on RAETH
-+
-+config RAETH_SCATTER_GATHER_RX_DMA
-+ bool
-+ default y if (RALINK_MT7620 || RALINK_MT7621)
-+ depends on RAETH
-+
-+
-+choice
-+ prompt "Network BottomHalves"
-+ depends on RAETH
-+ default RA_NETWORK_WORKQUEUE_BH
-+
-+ config RA_NETWORK_TASKLET_BH
-+ bool "Tasklet"
-+
-+ config RA_NETWORK_WORKQUEUE_BH
-+ bool "Work Queue"
-+
-+ config RAETH_NAPI
-+ bool "NAPI"
-+
-+endchoice
-+
-+#config TASKLET_WORKQUEUE_SW
-+# bool "Tasklet and Workqueue switch"
-+# depends on RA_NETWORK_TASKLET_BH
-+
-+config RAETH_SKB_RECYCLE_2K
-+ bool "SKB Recycling"
-+ depends on RAETH
-+
-+config RAETH_SPECIAL_TAG
-+ bool "Ralink Special Tag (0x810x)"
-+ depends on RAETH && RT_3052_ESW
-+
-+#config RAETH_JUMBOFRAME
-+# bool "Jumbo Frame up to 4K bytes"
-+# depends on RAETH && !(RALINK_RT3052 || RALINK_RT3352 || RALINK_RT5350 || RALINK_MT7628)
-+
-+config RAETH_CHECKSUM_OFFLOAD
-+ bool "TCP/UDP/IP checksum offload"
-+ default y
-+ depends on RAETH && !RALINK_RT2880
-+
-+#config RAETH_SW_FC
-+# bool "When TX ring is full, inform kernel stop transmit and stop RX handler"
-+# default n
-+# depends on RAETH
-+
-+config 32B_DESC
-+ bool "32bytes TX/RX description"
-+ default n
-+ depends on RAETH && (RALINK_MT7620 || RALINK_MT7621)
-+ ---help---
-+ At this moment, you cannot enable 32B description with Multiple RX ring at the same time.
-+
-+config RAETH_LRO
-+ bool "LRO (Large Receive Offload )"
-+ select INET_LRO
-+ depends on RAETH && (RALINK_RT6855A || RALINK_MT7620 || RALINK_MT7621)
-+
-+config RAETH_HW_VLAN_TX
-+ bool "Transmit VLAN HW (DoubleVLAN is not supported)"
-+ depends on RAETH && !(RALINK_RT5350 || RALINK_MT7628)
-+ ---help---
-+ Please disable HW_VLAN_TX if you need double vlan
-+
-+config RAETH_HW_VLAN_RX
-+ bool "Receive VLAN HW (DoubleVLAN is not supported)"
-+ depends on RAETH && RALINK_MT7621
-+ ---help---
-+ Please disable HW_VLAN_RX if you need double vlan
-+
-+config RAETH_TSO
-+ bool "TSOV4 (Tcp Segmentaton Offload)"
-+ depends on (RAETH_HW_VLAN_TX && (RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620)) || RALINK_MT7621
-+
-+config RAETH_TSOV6
-+ bool "TSOV6 (Tcp Segmentaton Offload)"
-+ depends on RAETH_TSO
-+
-+config RAETH_RW_PDMAPTR_FROM_VAR
-+ bool
-+ default y if RALINK_RT6855A || RALINK_MT7620
-+ depends on RAETH
-+
-+#config RAETH_QOS
-+# bool "QoS Feature"
-+# depends on RAETH && !RALINK_RT2880 && !RALINK_MT7620 && !RALINK_MT7621 && !RAETH_TSO
-+
-+choice
-+ prompt "QoS Type"
-+ depends on RAETH_QOS
-+ default DSCP_QOS_DSCP
-+
-+config RAETH_QOS_DSCP_BASED
-+ bool "DSCP-based"
-+ depends on RAETH_QOS
-+
-+config RAETH_QOS_VPRI_BASED
-+ bool "VPRI-based"
-+ depends on RAETH_QOS
-+
-+endchoice
-+
-+config RAETH_QDMA
-+ bool "Choose QDMA instead PDMA"
-+ default n
-+ depends on RAETH && RALINK_MT7621
-+
-+choice
-+ prompt "GMAC is connected to"
-+ depends on RAETH
-+ default GE1_RGMII_FORCE_1000
-+
-+config GE1_MII_FORCE_100
-+ bool "MII_FORCE_100 (10/100M Switch)"
-+ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
-+
-+config GE1_MII_AN
-+ bool "MII_AN (100Phy)"
-+ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
-+
-+config GE1_RVMII_FORCE_100
-+ bool "RvMII_FORCE_100 (CPU)"
-+ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
-+
-+config GE1_RGMII_FORCE_1000
-+ bool "RGMII_FORCE_1000 (GigaSW, CPU)"
-+ depends on (RALINK_RT2880 || RALINK_RT3883)
-+ select RALINK_SPI
-+
-+config GE1_RGMII_FORCE_1000
-+ bool "RGMII_FORCE_1000 (GigaSW, CPU)"
-+ depends on (RALINK_MT7621)
-+ select RT_3052_ESW
-+
-+config GE1_TRGMII_FORCE_1200
-+ bool "TRGMII_FORCE_1200 (GigaSW, CPU)"
-+ depends on (RALINK_MT7621)
-+ select RT_3052_ESW
-+
-+config GE1_RGMII_AN
-+ bool "RGMII_AN (GigaPhy)"
-+ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
-+
-+config GE1_RGMII_NONE
-+ bool "NONE (NO CONNECT)"
-+ depends on (RALINK_MT7621)
-+
-+endchoice
-+
-+config RT_3052_ESW
-+ bool "Ralink Embedded Switch"
-+ default y
-+ depends on (RALINK_RT3052 || RALINK_RT3352 || RALINK_RT5350 || RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620 || RALINK_MT7621 || RALINK_MT7628)
-+
-+config LAN_WAN_SUPPORT
-+ bool "LAN/WAN Partition"
-+ depends on RAETH_ROUTER || RT_3052_ESW
-+
-+choice
-+ prompt "Switch Board Layout Type"
-+ depends on LAN_WAN_SUPPORT || P5_RGMII_TO_MAC_MODE || GE1_RGMII_FORCE_1000 || GE1_TRGMII_FORCE_1200 || GE2_RGMII_FORCE_1000
-+ default WAN_AT_P0
-+
-+ config WAN_AT_P4
-+ bool "LLLL/W"
-+
-+ config WAN_AT_P0
-+ bool "W/LLLL"
-+endchoice
-+
-+config RALINK_VISTA_BASIC
-+ bool 'Vista Basic Logo for IC+ 175C'
-+ depends on LAN_WAN_SUPPORT && (RALINK_RT2880 || RALINK_RT3883)
-+
-+config ESW_DOUBLE_VLAN_TAG
-+ bool
-+ default y if RT_3052_ESW
-+
-+config RAETH_HAS_PORT4
-+ bool "Port 4 Support"
-+ depends on RAETH && RALINK_MT7620
-+choice
-+ prompt "Target Mode"
-+ depends on RAETH_HAS_PORT4
-+ default P4_RGMII_TO_MAC_MODE
-+
-+ config P4_MAC_TO_PHY_MODE
-+ bool "Giga_Phy (RGMII)"
-+ config GE_RGMII_MT7530_P0_AN
-+ bool "GE_RGMII_MT7530_P0_AN (MT7530 Internal GigaPhy)"
-+ config GE_RGMII_MT7530_P4_AN
-+ bool "GE_RGMII_MT7530_P4_AN (MT7530 Internal GigaPhy)"
-+ config P4_RGMII_TO_MAC_MODE
-+ bool "Giga_SW/iNIC (RGMII)"
-+ config P4_MII_TO_MAC_MODE
-+ bool "External_CPU (MII_RvMII)"
-+ config P4_RMII_TO_MAC_MODE
-+ bool "External_CPU (RvMII_MII)"
-+endchoice
-+
-+config MAC_TO_GIGAPHY_MODE_ADDR2
-+ hex "Port4 Phy Address"
-+ default 0x4
-+ depends on P4_MAC_TO_PHY_MODE
-+
-+config RAETH_HAS_PORT5
-+ bool "Port 5 Support"
-+ depends on RAETH && (RALINK_RT3052 || RALINK_RT3352 || RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620)
-+choice
-+ prompt "Target Mode"
-+ depends on RAETH_HAS_PORT5
-+ default P5_RGMII_TO_MAC_MODE
-+
-+ config P5_MAC_TO_PHY_MODE
-+ bool "Giga_Phy (RGMII)"
-+ config P5_RGMII_TO_MAC_MODE
-+ bool "Giga_SW/iNIC (RGMII)"
-+ config P5_RGMII_TO_MT7530_MODE
-+ bool "MT7530 Giga_SW (RGMII)"
-+ depends on RALINK_MT7620
-+ config P5_MII_TO_MAC_MODE
-+ bool "External_CPU (MII_RvMII)"
-+ config P5_RMII_TO_MAC_MODE
-+ bool "External_CPU (RvMII_MII)"
-+endchoice
-+
-+config MAC_TO_GIGAPHY_MODE_ADDR
-+ hex "GE1 Phy Address"
-+ default 0x1F
-+ depends on GE1_MII_AN || GE1_RGMII_AN
-+
-+config MAC_TO_GIGAPHY_MODE_ADDR
-+ hex "Port5 Phy Address"
-+ default 0x5
-+ depends on P5_MAC_TO_PHY_MODE
-+
-+config RAETH_GMAC2
-+ bool "GMAC2 Support"
-+ depends on RAETH && (RALINK_RT3883 || RALINK_MT7621)
-+
-+choice
-+ prompt "GMAC2 is connected to"
-+ depends on RAETH_GMAC2
-+ default GE2_RGMII_AN
-+
-+config GE2_MII_FORCE_100
-+ bool "MII_FORCE_100 (10/100M Switch)"
-+ depends on RAETH_GMAC2
-+
-+config GE2_MII_AN
-+ bool "MII_AN (100Phy)"
-+ depends on RAETH_GMAC2
-+
-+config GE2_RVMII_FORCE_100
-+ bool "RvMII_FORCE_100 (CPU)"
-+ depends on RAETH_GMAC2
-+
-+config GE2_RGMII_FORCE_1000
-+ bool "RGMII_FORCE_1000 (GigaSW, CPU)"
-+ depends on RAETH_GMAC2
-+ select RALINK_SPI
-+
-+config GE2_RGMII_AN
-+ bool "RGMII_AN (GigaPhy)"
-+ depends on RAETH_GMAC2
-+
-+config GE2_INTERNAL_GPHY
-+ bool "Internal GigaPHY"
-+ depends on RAETH_GMAC2
-+ select LAN_WAN_SUPPORT
-+
-+endchoice
-+
-+config GE_RGMII_INTERNAL_P0_AN
-+ bool
-+ depends on GE2_INTERNAL_GPHY
-+ default y if WAN_AT_P0
-+
-+config GE_RGMII_INTERNAL_P4_AN
-+ bool
-+ depends on GE2_INTERNAL_GPHY
-+ default y if WAN_AT_P4
-+
-+config MAC_TO_GIGAPHY_MODE_ADDR2
-+ hex
-+ default 0 if GE_RGMII_INTERNAL_P0_AN
-+ default 4 if GE_RGMII_INTERNAL_P4_AN
-+ depends on GE_RGMII_INTERNAL_P0_AN || GE_RGMII_INTERNAL_P4_AN
-+
-+config MAC_TO_GIGAPHY_MODE_ADDR2
-+ hex "GE2 Phy Address"
-+ default 0x1E
-+ depends on GE2_MII_AN || GE2_RGMII_AN
-+
-+#force 100M
-+config RAETH_ROUTER
-+bool
-+default y if GE1_MII_FORCE_100 || GE2_MII_FORCE_100 || GE1_RVMII_FORCE_100 || GE2_RVMII_FORCE_100
-+
-+#force 1000M
-+config MAC_TO_MAC_MODE
-+bool
-+default y if GE1_RGMII_FORCE_1000 || GE2_RGMII_FORCE_1000
-+depends on (RALINK_RT2880 || RALINK_RT3883)
-+
-+#AN
-+config GIGAPHY
-+bool
-+default y if GE1_RGMII_AN || GE2_RGMII_AN
-+
-+#AN
-+config 100PHY
-+bool
-+default y if GE1_MII_AN || GE2_MII_AN
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/Makefile
-@@ -0,0 +1,7 @@
-+obj-$(CONFIG_RAETH) += raeth.o
-+raeth-objs := ra_mac.o mii_mgr.o
-+raeth-objs += raether_pdma.o
-+EXTRA_CFLAGS += -DWORKQUEUE_BH
-+#EXTRA_CFLAGS += -DCONFIG_RAETH_MULTIPLE_RX_RING
-+
-+raeth-objs += raether.o
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/ethtool_readme.txt
-@@ -0,0 +1,44 @@
-+
-+Ethtool readme for selecting different PHY address.
-+
-+Before doing any ethtool command you should make sure the current PHY
-+address is expected. The default PHY address is 1(port 1).
-+
-+You can change current PHY address to X(0~4) by doing follow command:
-+# echo X > /proc/rt2880/gmac
-+
-+Ethtool command also would show the current PHY address as following.
-+
-+# ethtool eth2
-+Settings for eth2:
-+ Supported ports: [ TP MII ]
-+ Supported link modes: 10baseT/Half 10baseT/Full
-+ 100baseT/Half 100baseT/Full
-+ Supports auto-negotiation: Yes
-+ Advertised link modes: 10baseT/Half 10baseT/Full
-+ 100baseT/Half 100baseT/Full
-+ Advertised auto-negotiation: No
-+ Speed: 10Mb/s
-+ Duplex: Full
-+ Port: MII
-+ PHYAD: 1
-+ Transceiver: internal
-+ Auto-negotiation: off
-+ Current message level: 0x00000000 (0)
-+ Link detected: no
-+
-+
-+The "PHYAD" field shows the current PHY address.
-+
-+
-+
-+Usage example
-+1) show port1 info
-+# echo 1 > /proc/rt2880/gmac # change phy address to 1
-+# ethtool eth2
-+
-+2) show port0 info
-+# echo 0 > /proc/rt2880/gmac # change phy address to 0
-+# ethtool eth2
-+
-+
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/mii_mgr.c
-@@ -0,0 +1,166 @@
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/netdevice.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0)
-+#include <asm/rt2880/rt_mmap.h>
-+#endif
-+
-+#include "ra2882ethreg.h"
-+#include "raether.h"
-+
-+
-+#define PHY_CONTROL_0 0x0004
-+#define MDIO_PHY_CONTROL_0 (RALINK_ETH_SW_BASE + PHY_CONTROL_0)
-+#define enable_mdio(x)
-+
-+
-+u32 __mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data)
-+{
-+ u32 volatile status = 0;
-+ u32 rc = 0;
-+ unsigned long volatile t_start = jiffies;
-+ u32 volatile data = 0;
-+
-+ /* We enable mdio gpio purpose register, and disable it when exit. */
-+ enable_mdio(1);
-+
-+ // make sure previous read operation is complete
-+ while (1) {
-+ // 0 : Read/write operation complete
-+ if(!( sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31)))
-+ {
-+ break;
-+ }
-+ else if (time_after(jiffies, t_start + 5*HZ)) {
-+ enable_mdio(0);
-+ printk("\n MDIO Read operation is ongoing !!\n");
-+ return rc;
-+ }
-+ }
-+
-+ data = (0x01 << 16) | (0x02 << 18) | (phy_addr << 20) | (phy_register << 25);
-+ sysRegWrite(MDIO_PHY_CONTROL_0, data);
-+ data |= (1<<31);
-+ sysRegWrite(MDIO_PHY_CONTROL_0, data);
-+ //printk("\n Set Command [0x%08X] to PHY !!\n",MDIO_PHY_CONTROL_0);
-+
-+
-+ // make sure read operation is complete
-+ t_start = jiffies;
-+ while (1) {
-+ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) {
-+ status = sysRegRead(MDIO_PHY_CONTROL_0);
-+ *read_data = (u32)(status & 0x0000FFFF);
-+
-+ enable_mdio(0);
-+ return 1;
-+ }
-+ else if (time_after(jiffies, t_start+5*HZ)) {
-+ enable_mdio(0);
-+ printk("\n MDIO Read operation is ongoing and Time Out!!\n");
-+ return 0;
-+ }
-+ }
-+}
-+
-+u32 __mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data)
-+{
-+ unsigned long volatile t_start=jiffies;
-+ u32 volatile data;
-+
-+ enable_mdio(1);
-+
-+ // make sure previous write operation is complete
-+ while(1) {
-+ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31)))
-+ {
-+ break;
-+ }
-+ else if (time_after(jiffies, t_start + 5 * HZ)) {
-+ enable_mdio(0);
-+ printk("\n MDIO Write operation ongoing\n");
-+ return 0;
-+ }
-+ }
-+ /*add 1 us delay to make sequencial write more robus*/
-+ udelay(1);
-+
-+ data = (0x01 << 16)| (1<<18) | (phy_addr << 20) | (phy_register << 25) | write_data;
-+ sysRegWrite(MDIO_PHY_CONTROL_0, data);
-+ data |= (1<<31);
-+ sysRegWrite(MDIO_PHY_CONTROL_0, data); //start operation
-+ //printk("\n Set Command [0x%08X] to PHY !!\n",MDIO_PHY_CONTROL_0);
-+
-+ t_start = jiffies;
-+
-+ // make sure write operation is complete
-+ while (1) {
-+ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) //0 : Read/write operation complete
-+ {
-+ enable_mdio(0);
-+ return 1;
-+ }
-+ else if (time_after(jiffies, t_start + 5 * HZ)) {
-+ enable_mdio(0);
-+ printk("\n MDIO Write operation Time Out\n");
-+ return 0;
-+ }
-+ }
-+}
-+
-+u32 mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data)
-+{
-+ u32 low_word;
-+ u32 high_word;
-+ if(phy_addr==31)
-+ {
-+ //phase1: write page address phase
-+ if(__mii_mgr_write(phy_addr, 0x1f, ((phy_register >> 6) & 0x3FF))) {
-+ //phase2: write address & read low word phase
-+ if(__mii_mgr_read(phy_addr, (phy_register >> 2) & 0xF, &low_word)) {
-+ //phase3: write address & read high word phase
-+ if(__mii_mgr_read(phy_addr, (0x1 << 4), &high_word)) {
-+ *read_data = (high_word << 16) | (low_word & 0xFFFF);
-+ return 1;
-+ }
-+ }
-+ }
-+ } else
-+ {
-+ if(__mii_mgr_read(phy_addr, phy_register, read_data)) {
-+ return 1;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+u32 mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data)
-+{
-+ if(phy_addr == 31)
-+ {
-+ //phase1: write page address phase
-+ if(__mii_mgr_write(phy_addr, 0x1f, (phy_register >> 6) & 0x3FF)) {
-+ //phase2: write address & read low word phase
-+ if(__mii_mgr_write(phy_addr, ((phy_register >> 2) & 0xF), write_data & 0xFFFF)) {
-+ //phase3: write address & read high word phase
-+ if(__mii_mgr_write(phy_addr, (0x1 << 4), write_data >> 16)) {
-+ return 1;
-+ }
-+ }
-+ }
-+ } else
-+ {
-+ if(__mii_mgr_write(phy_addr, phy_register, write_data)) {
-+ return 1;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(mii_mgr_write);
-+EXPORT_SYMBOL(mii_mgr_read);
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/ra2882ethreg.h
-@@ -0,0 +1,1268 @@
-+#ifndef RA2882ETHREG_H
-+#define RA2882ETHREG_H
-+
-+#include <linux/mii.h> // for struct mii_if_info in ra2882ethreg.h
-+#include <linux/version.h> /* check linux version for 2.4 and 2.6 compatibility */
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+#include <asm/rt2880/rt_mmap.h>
-+#endif
-+#include "raether.h"
-+
-+#ifdef WORKQUEUE_BH
-+#include <linux/workqueue.h>
-+#endif // WORKQUEUE_BH //
-+#ifdef CONFIG_RAETH_LRO
-+#include <linux/inet_lro.h>
-+#endif
-+
-+#define MAX_PACKET_SIZE 1514
-+#define MIN_PACKET_SIZE 60
-+
-+#define phys_to_bus(a) (a & 0x1FFFFFFF)
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)
-+#define BIT(x) ((1 << x))
-+#endif
-+#define ETHER_ADDR_LEN 6
-+
-+/* Phy Vender ID list */
-+
-+#define EV_ICPLUS_PHY_ID0 0x0243
-+#define EV_ICPLUS_PHY_ID1 0x0D90
-+#define EV_MARVELL_PHY_ID0 0x0141
-+#define EV_MARVELL_PHY_ID1 0x0CC2
-+#define EV_VTSS_PHY_ID0 0x0007
-+#define EV_VTSS_PHY_ID1 0x0421
-+
-+/*
-+ FE_INT_STATUS
-+*/
-+#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
-+
-+#define RX_COHERENT BIT(31)
-+#define RX_DLY_INT BIT(30)
-+#define TX_COHERENT BIT(29)
-+#define TX_DLY_INT BIT(28)
-+
-+#define RX_DONE_INT1 BIT(17)
-+#define RX_DONE_INT0 BIT(16)
-+
-+#define TX_DONE_INT3 BIT(3)
-+#define TX_DONE_INT2 BIT(2)
-+#define TX_DONE_INT1 BIT(1)
-+#define TX_DONE_INT0 BIT(0)
-+
-+#if defined (CONFIG_RALINK_MT7621)
-+#define RLS_COHERENT BIT(29)
-+#define RLS_DLY_INT BIT(28)
-+#define RLS_DONE_INT BIT(0)
-+#endif
-+
-+#else
-+//#define CNT_PPE_AF BIT(31)
-+//#define CNT_GDM_AF BIT(29)
-+#define PSE_P2_FC BIT(26)
-+#define GDM_CRC_DROP BIT(25)
-+#define PSE_BUF_DROP BIT(24)
-+#define GDM_OTHER_DROP BIT(23)
-+#define PSE_P1_FC BIT(22)
-+#define PSE_P0_FC BIT(21)
-+#define PSE_FQ_EMPTY BIT(20)
-+#define GE1_STA_CHG BIT(18)
-+#define TX_COHERENT BIT(17)
-+#define RX_COHERENT BIT(16)
-+
-+#define TX_DONE_INT3 BIT(11)
-+#define TX_DONE_INT2 BIT(10)
-+#define TX_DONE_INT1 BIT(9)
-+#define TX_DONE_INT0 BIT(8)
-+#define RX_DONE_INT1 RX_DONE_INT0
-+#define RX_DONE_INT0 BIT(2)
-+#define TX_DLY_INT BIT(1)
-+#define RX_DLY_INT BIT(0)
-+#endif
-+
-+#define FE_INT_ALL (TX_DONE_INT3 | TX_DONE_INT2 | \
-+ TX_DONE_INT1 | TX_DONE_INT0 | \
-+ RX_DONE_INT0 )
-+
-+#if defined (CONFIG_RALINK_MT7621)
-+#define QFE_INT_ALL (RLS_DONE_INT | RX_DONE_INT0 | RX_DONE_INT1)
-+#define QFE_INT_DLY_INIT (RLS_DLY_INT | RX_DLY_INT)
-+
-+#define NUM_QDMA_PAGE 256
-+#define QDMA_PAGE_SIZE 2048
-+#endif
-+/*
-+ * SW_INT_STATUS
-+ */
-+#if defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628)
-+#define PORT0_QUEUE_FULL BIT(14) //port0 queue full
-+#define PORT1_QUEUE_FULL BIT(15) //port1 queue full
-+#define PORT2_QUEUE_FULL BIT(16) //port2 queue full
-+#define PORT3_QUEUE_FULL BIT(17) //port3 queue full
-+#define PORT4_QUEUE_FULL BIT(18) //port4 queue full
-+#define PORT5_QUEUE_FULL BIT(19) //port5 queue full
-+#define PORT6_QUEUE_FULL BIT(20) //port6 queue full
-+#define SHARED_QUEUE_FULL BIT(23) //shared queue full
-+#define QUEUE_EXHAUSTED BIT(24) //global queue is used up and all packets are dropped
-+#define BC_STROM BIT(25) //the device is undergoing broadcast storm
-+#define PORT_ST_CHG BIT(26) //Port status change
-+#define UNSECURED_ALERT BIT(27) //Intruder alert
-+#define ABNORMAL_ALERT BIT(28) //Abnormal
-+
-+#define ESW_ISR (RALINK_ETH_SW_BASE + 0x00)
-+#define ESW_IMR (RALINK_ETH_SW_BASE + 0x04)
-+#define ESW_INT_ALL (PORT_ST_CHG)
-+
-+#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620)
-+#define MIB_INT BIT(25)
-+#define ACL_INT BIT(24)
-+#define P5_LINK_CH BIT(5)
-+#define P4_LINK_CH BIT(4)
-+#define P3_LINK_CH BIT(3)
-+#define P2_LINK_CH BIT(2)
-+#define P1_LINK_CH BIT(1)
-+#define P0_LINK_CH BIT(0)
-+
-+#define RX_GOCT_CNT BIT(4)
-+#define RX_GOOD_CNT BIT(6)
-+#define TX_GOCT_CNT BIT(17)
-+#define TX_GOOD_CNT BIT(19)
-+
-+#define MSK_RX_GOCT_CNT BIT(4)
-+#define MSK_RX_GOOD_CNT BIT(6)
-+#define MSK_TX_GOCT_CNT BIT(17)
-+#define MSK_TX_GOOD_CNT BIT(19)
-+#define MSK_CNT_INT_ALL (MSK_RX_GOCT_CNT | MSK_RX_GOOD_CNT | MSK_TX_GOCT_CNT | MSK_TX_GOOD_CNT)
-+//#define MSK_CNT_INT_ALL (MSK_RX_GOOD_CNT | MSK_TX_GOOD_CNT)
-+
-+
-+#define ESW_IMR (RALINK_ETH_SW_BASE + 0x7000 + 0x8)
-+#define ESW_ISR (RALINK_ETH_SW_BASE + 0x7000 + 0xC)
-+#define ESW_INT_ALL (P0_LINK_CH | P1_LINK_CH | P2_LINK_CH | P3_LINK_CH | P4_LINK_CH | P5_LINK_CH | ACL_INT | MIB_INT)
-+#define ESW_AISR (RALINK_ETH_SW_BASE + 0x8)
-+#define ESW_P0_IntSn (RALINK_ETH_SW_BASE + 0x4004)
-+#define ESW_P1_IntSn (RALINK_ETH_SW_BASE + 0x4104)
-+#define ESW_P2_IntSn (RALINK_ETH_SW_BASE + 0x4204)
-+#define ESW_P3_IntSn (RALINK_ETH_SW_BASE + 0x4304)
-+#define ESW_P4_IntSn (RALINK_ETH_SW_BASE + 0x4404)
-+#define ESW_P5_IntSn (RALINK_ETH_SW_BASE + 0x4504)
-+#define ESW_P6_IntSn (RALINK_ETH_SW_BASE + 0x4604)
-+#define ESW_P0_IntMn (RALINK_ETH_SW_BASE + 0x4008)
-+#define ESW_P1_IntMn (RALINK_ETH_SW_BASE + 0x4108)
-+#define ESW_P2_IntMn (RALINK_ETH_SW_BASE + 0x4208)
-+#define ESW_P3_IntMn (RALINK_ETH_SW_BASE + 0x4308)
-+#define ESW_P4_IntMn (RALINK_ETH_SW_BASE + 0x4408)
-+#define ESW_P5_IntMn (RALINK_ETH_SW_BASE + 0x4508)
-+#define ESW_P6_IntMn (RALINK_ETH_SW_BASE + 0x4608)
-+
-+#if defined (CONFIG_RALINK_MT7620)
-+#define ESW_P7_IntSn (RALINK_ETH_SW_BASE + 0x4704)
-+#define ESW_P7_IntMn (RALINK_ETH_SW_BASE + 0x4708)
-+#endif
-+
-+
-+#define ESW_PHY_POLLING (RALINK_ETH_SW_BASE + 0x7000)
-+
-+#elif defined (CONFIG_RALINK_MT7621)
-+
-+#define ESW_PHY_POLLING (RALINK_ETH_SW_BASE + 0x0000)
-+
-+#define P5_LINK_CH BIT(5)
-+#define P4_LINK_CH BIT(4)
-+#define P3_LINK_CH BIT(3)
-+#define P2_LINK_CH BIT(2)
-+#define P1_LINK_CH BIT(1)
-+#define P0_LINK_CH BIT(0)
-+
-+
-+#endif // CONFIG_RALINK_RT3052 || CONFIG_RALINK_RT3352 || CONFIG_RALINK_RT5350 || defined (CONFIG_RALINK_MT7628)//
-+
-+#define RX_BUF_ALLOC_SIZE 2000
-+#define FASTPATH_HEADROOM 64
-+
-+#define ETHER_BUFFER_ALIGN 32 ///// Align on a cache line
-+
-+#define ETHER_ALIGNED_RX_SKB_ADDR(addr) \
-+ ((((unsigned long)(addr) + ETHER_BUFFER_ALIGN - 1) & \
-+ ~(ETHER_BUFFER_ALIGN - 1)) - (unsigned long)(addr))
-+
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+typedef struct _PSEUDO_ADAPTER {
-+ struct net_device *RaethDev;
-+ struct net_device *PseudoDev;
-+ struct net_device_stats stat;
-+#if defined (CONFIG_ETHTOOL) /*&& defined (CONFIG_RAETH_ROUTER)*/
-+ struct mii_if_info mii_info;
-+#endif
-+
-+} PSEUDO_ADAPTER, PPSEUDO_ADAPTER;
-+
-+#define MAX_PSEUDO_ENTRY 1
-+#endif
-+
-+
-+
-+/* Register Categories Definition */
-+#define RAFRAMEENGINE_OFFSET 0x0000
-+#define RAGDMA_OFFSET 0x0020
-+#define RAPSE_OFFSET 0x0040
-+#define RAGDMA2_OFFSET 0x0060
-+#define RACDMA_OFFSET 0x0080
-+#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
-+
-+#define RAPDMA_OFFSET 0x0800
-+#define SDM_OFFSET 0x0C00
-+#else
-+#define RAPDMA_OFFSET 0x0100
-+#endif
-+#define RAPPE_OFFSET 0x0200
-+#define RACMTABLE_OFFSET 0x0400
-+#define RAPOLICYTABLE_OFFSET 0x1000
-+
-+
-+/* Register Map Detail */
-+/* RT3883 */
-+#define SYSCFG1 (RALINK_SYSCTL_BASE + 0x14)
-+
-+#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628)
-+
-+/* 1. PDMA */
-+#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x000)
-+#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x004)
-+#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x008)
-+#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x00C)
-+
-+#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x010)
-+#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x014)
-+#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x018)
-+#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x01C)
-+
-+#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x020)
-+#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x024)
-+#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x028)
-+#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x02C)
-+
-+#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x030)
-+#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x034)
-+#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x038)
-+#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x03C)
-+
-+#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x100)
-+#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x104)
-+#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x108)
-+#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x10C)
-+
-+#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x110)
-+#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x114)
-+#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x118)
-+#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x11C)
-+
-+#define PDMA_INFO (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x200)
-+#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x204)
-+#define PDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x208)
-+#define PDMA_RST_CFG (PDMA_RST_IDX)
-+#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x20C)
-+#define FREEQ_THRES (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x210)
-+#define INT_STATUS (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x220)
-+#define FE_INT_STATUS (INT_STATUS)
-+#define INT_MASK (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x228)
-+#define FE_INT_ENABLE (INT_MASK)
-+#define PDMA_WRR (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x280)
-+#define PDMA_SCH_CFG (PDMA_WRR)
-+
-+#define SDM_CON (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x00) //Switch DMA configuration
-+#define SDM_RRING (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x04) //Switch DMA Rx Ring
-+#define SDM_TRING (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x08) //Switch DMA Tx Ring
-+#define SDM_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x0C) //Switch MAC address LSB
-+#define SDM_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x10) //Switch MAC Address MSB
-+#define SDM_TPCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x100) //Switch DMA Tx packet count
-+#define SDM_TBCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x104) //Switch DMA Tx byte count
-+#define SDM_RPCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x108) //Switch DMA rx packet count
-+#define SDM_RBCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x10C) //Switch DMA rx byte count
-+#define SDM_CS_ERR (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x110) //Switch DMA rx checksum error count
-+
-+#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+
-+/* Old FE with New PDMA */
-+#define PDMA_RELATED 0x0800
-+/* 1. PDMA */
-+#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x000)
-+#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x004)
-+#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x008)
-+#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x00C)
-+
-+#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x010)
-+#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x014)
-+#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x018)
-+#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x01C)
-+
-+#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x020)
-+#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x024)
-+#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x028)
-+#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x02C)
-+
-+#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x030)
-+#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x034)
-+#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x038)
-+#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x03C)
-+
-+#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x100)
-+#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x104)
-+#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x108)
-+#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x10C)
-+
-+#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x110)
-+#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x114)
-+#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x118)
-+#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x11C)
-+
-+#define PDMA_INFO (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x200)
-+#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x204)
-+#define PDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x208)
-+#define PDMA_RST_CFG (PDMA_RST_IDX)
-+#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x20C)
-+#define FREEQ_THRES (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x210)
-+#define INT_STATUS (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x220)
-+#define FE_INT_STATUS (INT_STATUS)
-+#define INT_MASK (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x228)
-+#define FE_INT_ENABLE (INT_MASK)
-+#define SCH_Q01_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x280)
-+#define SCH_Q23_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x284)
-+
-+#define FE_GLO_CFG RALINK_FRAME_ENGINE_BASE + 0x00
-+#define FE_RST_GL RALINK_FRAME_ENGINE_BASE + 0x04
-+#define FE_INT_STATUS2 RALINK_FRAME_ENGINE_BASE + 0x08
-+#define FE_INT_ENABLE2 RALINK_FRAME_ENGINE_BASE + 0x0c
-+//#define FC_DROP_STA RALINK_FRAME_ENGINE_BASE + 0x18
-+#define FOE_TS_T RALINK_FRAME_ENGINE_BASE + 0x10
-+
-+#if defined (CONFIG_RALINK_MT7620)
-+#define GDMA1_RELATED 0x0600
-+#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00)
-+#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04)
-+#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08)
-+#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C)
-+#elif defined (CONFIG_RALINK_MT7621)
-+#define GDMA1_RELATED 0x0500
-+#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00)
-+#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04)
-+#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08)
-+#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C)
-+
-+#define GDMA2_RELATED 0x1500
-+#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x00)
-+#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x04)
-+#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x08)
-+#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x0C)
-+#else
-+#define GDMA1_RELATED 0x0020
-+#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00)
-+#define GDMA1_SCH_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04)
-+#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08)
-+#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C)
-+#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x10)
-+
-+#define GDMA2_RELATED 0x0060
-+#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x00)
-+#define GDMA2_SCH_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x04)
-+#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x08)
-+#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x0C)
-+#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x10)
-+#endif
-+
-+#if defined (CONFIG_RALINK_MT7620)
-+#define PSE_RELATED 0x0500
-+#define PSE_FQFC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x00)
-+#define PSE_IQ_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x04)
-+#define PSE_QUE_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x08)
-+#else
-+#define PSE_RELATED 0x0040
-+#define PSE_FQ_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x00)
-+#define CDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x04)
-+#define GDMA1_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x08)
-+#define GDMA2_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x0C)
-+#define CDMA_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x10)
-+#define GDMA1_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x14)
-+#define GDMA2_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x18)
-+#define PSE_IQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x1C)
-+#endif
-+
-+
-+#if defined (CONFIG_RALINK_MT7620)
-+#define CDMA_RELATED 0x0400
-+#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00)
-+#define SMACCR0 (RALINK_ETH_SW_BASE + 0x3FE4)
-+#define SMACCR1 (RALINK_ETH_SW_BASE + 0x3FE8)
-+#define CKGCR (RALINK_ETH_SW_BASE + 0x3FF0)
-+#elif defined (CONFIG_RALINK_MT7621)
-+#define CDMA_RELATED 0x0400
-+#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00) //fake definition
-+#define CDMP_IG_CTRL (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00)
-+#define CDMP_EG_CTRL (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x04)
-+#else
-+#define CDMA_RELATED 0x0080
-+#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00)
-+#define CDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x04)
-+#define SMACCR0 (RALINK_ETH_SW_BASE + 0x30E4)
-+#define SMACCR1 (RALINK_ETH_SW_BASE + 0x30E8)
-+#define CKGCR (RALINK_ETH_SW_BASE + 0x30F0)
-+#endif
-+
-+#define PDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+0x100)
-+
-+
-+#if defined (CONFIG_RALINK_MT7621)
-+/*kurtis: add QDMA define*/
-+
-+#define CLK_CFG_0 (RALINK_SYSCTL_BASE + 0x2C)
-+#define PAD_RGMII2_MDIO_CFG (RALINK_SYSCTL_BASE + 0x58)
-+
-+#define QDMA_RELATED 0x1800
-+#define QTX_CFG_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x000)
-+#define QTX_SCH_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x004)
-+#define QTX_HEAD_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x008)
-+#define QTX_TAIL_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x00C)
-+#define QTX_CFG_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x010)
-+#define QTX_SCH_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x014)
-+#define QTX_HEAD_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x018)
-+#define QTX_TAIL_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x01C)
-+#define QTX_CFG_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x020)
-+#define QTX_SCH_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x024)
-+#define QTX_HEAD_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x028)
-+#define QTX_TAIL_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x02C)
-+#define QTX_CFG_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x030)
-+#define QTX_SCH_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x034)
-+#define QTX_HEAD_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x038)
-+#define QTX_TAIL_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x03C)
-+#define QTX_CFG_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x040)
-+#define QTX_SCH_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x044)
-+#define QTX_HEAD_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x048)
-+#define QTX_TAIL_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x04C)
-+#define QTX_CFG_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x050)
-+#define QTX_SCH_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x054)
-+#define QTX_HEAD_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x058)
-+#define QTX_TAIL_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x05C)
-+#define QTX_CFG_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x060)
-+#define QTX_SCH_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x064)
-+#define QTX_HEAD_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x068)
-+#define QTX_TAIL_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x06C)
-+#define QTX_CFG_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x070)
-+#define QTX_SCH_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x074)
-+#define QTX_HEAD_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x078)
-+#define QTX_TAIL_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x07C)
-+#define QTX_CFG_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x080)
-+#define QTX_SCH_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x084)
-+#define QTX_HEAD_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x088)
-+#define QTX_TAIL_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x08C)
-+#define QTX_CFG_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x090)
-+#define QTX_SCH_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x094)
-+#define QTX_HEAD_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x098)
-+#define QTX_TAIL_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x09C)
-+#define QTX_CFG_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A0)
-+#define QTX_SCH_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A4)
-+#define QTX_HEAD_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A8)
-+#define QTX_TAIL_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0AC)
-+#define QTX_CFG_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B0)
-+#define QTX_SCH_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B4)
-+#define QTX_HEAD_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B8)
-+#define QTX_TAIL_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0BC)
-+#define QTX_CFG_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C0)
-+#define QTX_SCH_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C4)
-+#define QTX_HEAD_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C8)
-+#define QTX_TAIL_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0CC)
-+#define QTX_CFG_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D0)
-+#define QTX_SCH_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D4)
-+#define QTX_HEAD_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D8)
-+#define QTX_TAIL_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0DC)
-+#define QTX_CFG_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E0)
-+#define QTX_SCH_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E4)
-+#define QTX_HEAD_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E8)
-+#define QTX_TAIL_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0EC)
-+#define QTX_CFG_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F0)
-+#define QTX_SCH_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F4)
-+#define QTX_HEAD_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F8)
-+#define QTX_TAIL_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0FC)
-+#define QRX_BASE_PTR_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x100)
-+#define QRX_MAX_CNT_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x104)
-+#define QRX_CRX_IDX_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x108)
-+#define QRX_DRX_IDX_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x10C)
-+#define QRX_BASE_PTR_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x110)
-+#define QRX_MAX_CNT_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x114)
-+#define QRX_CRX_IDX_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x118)
-+#define QRX_DRX_IDX_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x11C)
-+#define QDMA_INFO (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x200)
-+#define QDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x204)
-+#define QDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x208)
-+#define QDMA_RST_CFG (QDMA_RST_IDX)
-+#define QDMA_DELAY_INT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x20C)
-+#define QDMA_FC_THRES (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x210)
-+#define QDMA_TX_SCH (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x214)
-+#define QDMA_INT_STS (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x218)
-+#define QFE_INT_STATUS (QDMA_INT_STS)
-+#define QDMA_INT_MASK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x21C)
-+#define QFE_INT_ENABLE (QDMA_INT_MASK)
-+#define QDMA_TRTCM (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x220)
-+#define QDMA_DATA0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x224)
-+#define QDMA_DATA1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x228)
-+#define QDMA_RED_THRES (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x22C)
-+#define QDMA_TEST (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x230)
-+#define QDMA_DMA (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x234)
-+#define QDMA_BMU (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x238)
-+#define QDMA_HRED1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x240)
-+#define QDMA_HRED2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x244)
-+#define QDMA_SRED1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x248)
-+#define QDMA_SRED2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x24C)
-+#define QTX_CTX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x300)
-+#define QTX_DTX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x304)
-+#define QTX_FWD_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x308)
-+#define QTX_CRX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x310)
-+#define QTX_DRX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x314)
-+#define QTX_RLS_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x318)
-+#define QDMA_FQ_HEAD (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x320)
-+#define QDMA_FQ_TAIL (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x324)
-+#define QDMA_FQ_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x328)
-+#define QDMA_FQ_BLEN (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x32C)
-+#define QTX_Q0MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x350)
-+#define QTX_Q1MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x354)
-+#define QTX_Q2MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x358)
-+#define QTX_Q3MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x35C)
-+#define QTX_Q0MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x360)
-+#define QTX_Q1MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x364)
-+#define QTX_Q2MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x368)
-+#define QTX_Q3MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x36C)
-+
-+
-+#endif/*MT7621 QDMA*/
-+
-+#else
-+
-+/* 1. Frame Engine Global Registers */
-+#define MDIO_ACCESS (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x00)
-+#define MDIO_CFG (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x04)
-+#define FE_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x08)
-+#define FE_RST_GL (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x0C)
-+#define FE_INT_STATUS (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x10)
-+#define FE_INT_ENABLE (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x14)
-+#define MDIO_CFG2 (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x18) //Original:FC_DROP_STA
-+#define FOC_TS_T (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x1C)
-+
-+
-+/* 2. GDMA Registers */
-+#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x00)
-+#define GDMA1_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x04)
-+#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x08)
-+#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x0C)
-+#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x10)
-+
-+#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x00)
-+#define GDMA2_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x04)
-+#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x08)
-+#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x0C)
-+#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x10)
-+
-+/* 3. PSE */
-+#define PSE_FQ_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x00)
-+#define CDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x04)
-+#define GDMA1_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x08)
-+#define GDMA2_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x0C)
-+#define PDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+0x1f0)
-+
-+/* 4. CDMA */
-+#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE+RACDMA_OFFSET+0x00)
-+#define CDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RACDMA_OFFSET+0x04)
-+/* skip ppoe sid and vlan id definition */
-+
-+
-+/* 5. PDMA */
-+#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x00)
-+#define PDMA_RST_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x04)
-+#define PDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x08)
-+
-+#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x0C)
-+
-+#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x10)
-+#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x14)
-+#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x18)
-+#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x1C)
-+
-+#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x20)
-+#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x24)
-+#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x28)
-+#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x2C)
-+
-+#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x40)
-+#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x44)
-+#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x48)
-+#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x4C)
-+
-+#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x50)
-+#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x54)
-+#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x58)
-+#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x5C)
-+
-+#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x30)
-+#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x34)
-+#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x38)
-+#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x3C)
-+
-+#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x40)
-+#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x44)
-+#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x48)
-+#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x4C)
-+
-+#endif
-+
-+#define DELAY_INT_INIT 0x84048404
-+#define FE_INT_DLY_INIT (TX_DLY_INT | RX_DLY_INT)
-+
-+
-+#if !defined (CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628)
-+
-+/* 6. Counter and Meter Table */
-+#define PPE_AC_BCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x000) /* PPE Accounting Group 0 Byte Cnt */
-+#define PPE_AC_PCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x004) /* PPE Accounting Group 0 Packet Cnt */
-+/* 0 ~ 63 */
-+
-+#define PPE_MTR_CNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x200) /* 0 ~ 63 */
-+/* skip... */
-+#define PPE_MTR_CNT63 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x2FC)
-+
-+#define GDMA_TX_GBCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x300) /* Transmit good byte cnt for GEport */
-+#define GDMA_TX_GPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x304) /* Transmit good pkt cnt for GEport */
-+#define GDMA_TX_SKIPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x308) /* Transmit skip cnt for GEport */
-+#define GDMA_TX_COLCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x30C) /* Transmit collision cnt for GEport */
-+
-+/* update these address mapping to fit data sheet v0.26, by bobtseng, 2007.6.14 */
-+#define GDMA_RX_GBCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x320)
-+#define GDMA_RX_GPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x324)
-+#define GDMA_RX_OERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x328)
-+#define GDMA_RX_FERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x32C)
-+#define GDMA_RX_SERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x330)
-+#define GDMA_RX_LERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x334)
-+#define GDMA_RX_CERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x338)
-+#define GDMA_RX_FCCNT1 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x33C)
-+
-+#endif
-+
-+
-+/* Per Port Packet Counts in RT3052, added by bobtseng 2009.4.17. */
-+#define PORT0_PKCOUNT (0xb01100e8)
-+#define PORT1_PKCOUNT (0xb01100ec)
-+#define PORT2_PKCOUNT (0xb01100f0)
-+#define PORT3_PKCOUNT (0xb01100f4)
-+#define PORT4_PKCOUNT (0xb01100f8)
-+#define PORT5_PKCOUNT (0xb01100fc)
-+
-+
-+// PHYS_TO_K1
-+#define PHYS_TO_K1(physaddr) KSEG1ADDR(physaddr)
-+
-+
-+#define sysRegRead(phys) \
-+ (*(volatile unsigned int *)PHYS_TO_K1(phys))
-+
-+#define sysRegWrite(phys, val) \
-+ ((*(volatile unsigned int *)PHYS_TO_K1(phys)) = (val))
-+
-+#define u_long unsigned long
-+#define u32 unsigned int
-+#define u16 unsigned short
-+
-+
-+/* ====================================== */
-+#define GDM1_DISPAD BIT(18)
-+#define GDM1_DISCRC BIT(17)
-+
-+//GDMA1 uni-cast frames destination port
-+#define GDM1_ICS_EN (0x1 << 22)
-+#define GDM1_TCS_EN (0x1 << 21)
-+#define GDM1_UCS_EN (0x1 << 20)
-+#define GDM1_JMB_EN (0x1 << 19)
-+#define GDM1_STRPCRC (0x1 << 16)
-+#define GDM1_UFRC_P_CPU (0 << 12)
-+#if defined (CONFIG_RALINK_MT7621)
-+#define GDM1_UFRC_P_PPE (4 << 12)
-+#else
-+#define GDM1_UFRC_P_PPE (6 << 12)
-+#endif
-+
-+//GDMA1 broad-cast MAC address frames
-+#define GDM1_BFRC_P_CPU (0 << 8)
-+#if defined (CONFIG_RALINK_MT7621)
-+#define GDM1_BFRC_P_PPE (4 << 8)
-+#else
-+#define GDM1_BFRC_P_PPE (6 << 8)
-+#endif
-+
-+//GDMA1 multi-cast MAC address frames
-+#define GDM1_MFRC_P_CPU (0 << 4)
-+#if defined (CONFIG_RALINK_MT7621)
-+#define GDM1_MFRC_P_PPE (4 << 4)
-+#else
-+#define GDM1_MFRC_P_PPE (6 << 4)
-+#endif
-+
-+//GDMA1 other MAC address frames destination port
-+#define GDM1_OFRC_P_CPU (0 << 0)
-+#if defined (CONFIG_RALINK_MT7621)
-+#define GDM1_OFRC_P_PPE (4 << 0)
-+#else
-+#define GDM1_OFRC_P_PPE (6 << 0)
-+#endif
-+
-+#if defined (CONFIG_RALINK_RT6856) || defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+/* checksum generator registers are removed */
-+#define ICS_GEN_EN (0 << 2)
-+#define UCS_GEN_EN (0 << 1)
-+#define TCS_GEN_EN (0 << 0)
-+#else
-+#define ICS_GEN_EN (1 << 2)
-+#define UCS_GEN_EN (1 << 1)
-+#define TCS_GEN_EN (1 << 0)
-+#endif
-+
-+// MDIO_CFG bit
-+#define MDIO_CFG_GP1_FC_TX (1 << 11)
-+#define MDIO_CFG_GP1_FC_RX (1 << 10)
-+
-+/* ====================================== */
-+/* ====================================== */
-+#define GP1_LNK_DWN BIT(9)
-+#define GP1_AN_FAIL BIT(8)
-+/* ====================================== */
-+/* ====================================== */
-+#define PSE_RESET BIT(0)
-+/* ====================================== */
-+#define PST_DRX_IDX1 BIT(17)
-+#define PST_DRX_IDX0 BIT(16)
-+#define PST_DTX_IDX3 BIT(3)
-+#define PST_DTX_IDX2 BIT(2)
-+#define PST_DTX_IDX1 BIT(1)
-+#define PST_DTX_IDX0 BIT(0)
-+
-+#define RX_2B_OFFSET BIT(31)
-+#define DESC_32B_EN BIT(8)
-+#define TX_WB_DDONE BIT(6)
-+#define RX_DMA_BUSY BIT(3)
-+#define TX_DMA_BUSY BIT(1)
-+#define RX_DMA_EN BIT(2)
-+#define TX_DMA_EN BIT(0)
-+
-+#define PDMA_BT_SIZE_4DWORDS (0<<4)
-+#define PDMA_BT_SIZE_8DWORDS (1<<4)
-+#define PDMA_BT_SIZE_16DWORDS (2<<4)
-+#define PDMA_BT_SIZE_32DWORDS (3<<4)
-+
-+/* Register bits.
-+ */
-+
-+#define MACCFG_RXEN (1<<2)
-+#define MACCFG_TXEN (1<<3)
-+#define MACCFG_PROMISC (1<<18)
-+#define MACCFG_RXMCAST (1<<19)
-+#define MACCFG_FDUPLEX (1<<20)
-+#define MACCFG_PORTSEL (1<<27)
-+#define MACCFG_HBEATDIS (1<<28)
-+
-+
-+#define DMACTL_SR (1<<1) /* Start/Stop Receive */
-+#define DMACTL_ST (1<<13) /* Start/Stop Transmission Command */
-+
-+#define DMACFG_SWR (1<<0) /* Software Reset */
-+#define DMACFG_BURST32 (32<<8)
-+
-+#define DMASTAT_TS 0x00700000 /* Transmit Process State */
-+#define DMASTAT_RS 0x000e0000 /* Receive Process State */
-+
-+#define MACCFG_INIT 0 //(MACCFG_FDUPLEX) // | MACCFG_PORTSEL)
-+
-+
-+
-+/* Descriptor bits.
-+ */
-+#define R_OWN 0x80000000 /* Own Bit */
-+#define RD_RER 0x02000000 /* Receive End Of Ring */
-+#define RD_LS 0x00000100 /* Last Descriptor */
-+#define RD_ES 0x00008000 /* Error Summary */
-+#define RD_CHAIN 0x01000000 /* Chained */
-+
-+/* Word 0 */
-+#define T_OWN 0x80000000 /* Own Bit */
-+#define TD_ES 0x00008000 /* Error Summary */
-+
-+/* Word 1 */
-+#define TD_LS 0x40000000 /* Last Segment */
-+#define TD_FS 0x20000000 /* First Segment */
-+#define TD_TER 0x08000000 /* Transmit End Of Ring */
-+#define TD_CHAIN 0x01000000 /* Chained */
-+
-+
-+#define TD_SET 0x08000000 /* Setup Packet */
-+
-+
-+#define POLL_DEMAND 1
-+
-+#define RSTCTL (0x34)
-+#define RSTCTL_RSTENET1 (1<<19)
-+#define RSTCTL_RSTENET2 (1<<20)
-+
-+#define INIT_VALUE_OF_RT2883_PSE_FQ_CFG 0xff908000
-+#define INIT_VALUE_OF_PSE_FQFC_CFG 0x80504000
-+#define INIT_VALUE_OF_FORCE_100_FD 0x1001BC01
-+#define INIT_VALUE_OF_FORCE_1000_FD 0x1F01DC01
-+
-+// Define Whole FE Reset Register
-+#define RSTCTRL (RALINK_SYSCTL_BASE + 0x34)
-+
-+/*=========================================
-+ PDMA RX Descriptor Format define
-+=========================================*/
-+
-+//-------------------------------------------------
-+typedef struct _PDMA_RXD_INFO1_ PDMA_RXD_INFO1_T;
-+
-+struct _PDMA_RXD_INFO1_
-+{
-+ unsigned int PDP0;
-+};
-+//-------------------------------------------------
-+typedef struct _PDMA_RXD_INFO2_ PDMA_RXD_INFO2_T;
-+
-+struct _PDMA_RXD_INFO2_
-+{
-+ unsigned int PLEN1 : 14;
-+ unsigned int LS1 : 1;
-+ unsigned int TAG : 1;
-+ unsigned int PLEN0 : 14;
-+ unsigned int LS0 : 1;
-+ unsigned int DDONE_bit : 1;
-+};
-+//-------------------------------------------------
-+typedef struct _PDMA_RXD_INFO3_ PDMA_RXD_INFO3_T;
-+
-+struct _PDMA_RXD_INFO3_
-+{
-+ unsigned int VID:16;
-+ unsigned int TPID:16;
-+};
-+//-------------------------------------------------
-+typedef struct _PDMA_RXD_INFO4_ PDMA_RXD_INFO4_T;
-+
-+struct _PDMA_RXD_INFO4_
-+{
-+#if defined (CONFIG_RALINK_MT7620)
-+ unsigned int FOE_Entry : 14;
-+ unsigned int CRSN : 5;
-+ unsigned int SPORT : 3;
-+ unsigned int L4F : 1;
-+ unsigned int L4VLD : 1;
-+ unsigned int TACK : 1;
-+ unsigned int IP4F : 1;
-+ unsigned int IP4 : 1;
-+ unsigned int IP6 : 1;
-+ unsigned int UN_USE1 : 4;
-+#elif defined (CONFIG_RALINK_MT7621)
-+ unsigned int FOE_Entry : 14;
-+ unsigned int CRSN : 5;
-+ unsigned int SP : 4;
-+ unsigned int L4F : 1;
-+ unsigned int L4VLD : 1;
-+ unsigned int TACK : 1;
-+ unsigned int IP4F : 1;
-+ unsigned int IP4 : 1;
-+ unsigned int IP6 : 1;
-+ unsigned int UN_USE1 : 3;
-+#else
-+ unsigned int FOE_Entry : 14;
-+ unsigned int FVLD : 1;
-+ unsigned int UN_USE1 : 1;
-+ unsigned int AI : 8;
-+ unsigned int SP : 3;
-+ unsigned int AIS : 1;
-+ unsigned int L4F : 1;
-+ unsigned int IPF : 1;
-+ unsigned int L4FVLD_bit : 1;
-+ unsigned int IPFVLD_bit : 1;
-+#endif
-+};
-+
-+
-+struct PDMA_rxdesc {
-+ PDMA_RXD_INFO1_T rxd_info1;
-+ PDMA_RXD_INFO2_T rxd_info2;
-+ PDMA_RXD_INFO3_T rxd_info3;
-+ PDMA_RXD_INFO4_T rxd_info4;
-+#ifdef CONFIG_32B_DESC
-+ unsigned int rxd_info5;
-+ unsigned int rxd_info6;
-+ unsigned int rxd_info7;
-+ unsigned int rxd_info8;
-+#endif
-+};
-+
-+/*=========================================
-+ PDMA TX Descriptor Format define
-+=========================================*/
-+//-------------------------------------------------
-+typedef struct _PDMA_TXD_INFO1_ PDMA_TXD_INFO1_T;
-+
-+struct _PDMA_TXD_INFO1_
-+{
-+ unsigned int SDP0;
-+};
-+//-------------------------------------------------
-+typedef struct _PDMA_TXD_INFO2_ PDMA_TXD_INFO2_T;
-+
-+struct _PDMA_TXD_INFO2_
-+{
-+ unsigned int SDL1 : 14;
-+ unsigned int LS1_bit : 1;
-+ unsigned int BURST_bit : 1;
-+ unsigned int SDL0 : 14;
-+ unsigned int LS0_bit : 1;
-+ unsigned int DDONE_bit : 1;
-+};
-+//-------------------------------------------------
-+typedef struct _PDMA_TXD_INFO3_ PDMA_TXD_INFO3_T;
-+
-+struct _PDMA_TXD_INFO3_
-+{
-+ unsigned int SDP1;
-+};
-+//-------------------------------------------------
-+typedef struct _PDMA_TXD_INFO4_ PDMA_TXD_INFO4_T;
-+
-+struct _PDMA_TXD_INFO4_
-+{
-+#if defined (CONFIG_RALINK_MT7620)
-+ unsigned int VPRI_VIDX : 8;
-+ unsigned int SIDX : 4;
-+ unsigned int INSP : 1;
-+ unsigned int RESV : 2;
-+ unsigned int UDF : 5;
-+ unsigned int FP_BMAP : 8;
-+ unsigned int TSO : 1;
-+ unsigned int TUI_CO : 3;
-+#elif defined (CONFIG_RALINK_MT7621)
-+ unsigned int VLAN_TAG :17; // INSV(1)+VPRI(3)+CFI(1)+VID(12)
-+ unsigned int RESV : 2;
-+ unsigned int UDF : 6;
-+ unsigned int FPORT : 3;
-+ unsigned int TSO : 1;
-+ unsigned int TUI_CO : 3;
-+#else
-+ unsigned int VPRI_VIDX : 8;
-+ unsigned int SIDX : 4;
-+ unsigned int INSP : 1;
-+ unsigned int RESV : 1;
-+ unsigned int UN_USE3 : 2;
-+ unsigned int QN : 3;
-+ unsigned int UN_USE2 : 1;
-+ unsigned int UDF : 4;
-+ unsigned int PN : 3;
-+ unsigned int UN_USE1 : 1;
-+ unsigned int TSO : 1;
-+ unsigned int TUI_CO : 3;
-+#endif
-+};
-+
-+
-+struct PDMA_txdesc {
-+ PDMA_TXD_INFO1_T txd_info1;
-+ PDMA_TXD_INFO2_T txd_info2;
-+ PDMA_TXD_INFO3_T txd_info3;
-+ PDMA_TXD_INFO4_T txd_info4;
-+#ifdef CONFIG_32B_DESC
-+ unsigned int txd_info5;
-+ unsigned int txd_info6;
-+ unsigned int txd_info7;
-+ unsigned int txd_info8;
-+#endif
-+};
-+
-+
-+#if defined (CONFIG_RALINK_MT7621)
-+/*=========================================
-+ QDMA TX Descriptor Format define
-+=========================================*/
-+//-------------------------------------------------
-+typedef struct _QDMA_TXD_INFO1_ QDMA_TXD_INFO1_T;
-+
-+struct _QDMA_TXD_INFO1_
-+{
-+ unsigned int SDP;
-+};
-+//-------------------------------------------------
-+typedef struct _QDMA_TXD_INFO2_ QDMA_TXD_INFO2_T;
-+
-+struct _QDMA_TXD_INFO2_
-+{
-+ unsigned int NDP;
-+};
-+//-------------------------------------------------
-+typedef struct _QDMA_TXD_INFO3_ QDMA_TXD_INFO3_T;
-+
-+struct _QDMA_TXD_INFO3_
-+{
-+ unsigned int QID : 4;
-+ unsigned int RESV : 10;
-+ unsigned int SWC_bit : 1;
-+ unsigned int BURST_bit : 1;
-+ unsigned int SDL : 14;
-+ unsigned int LS_bit : 1;
-+ unsigned int OWN_bit : 1;
-+};
-+//-------------------------------------------------
-+typedef struct _QDMA_TXD_INFO4_ QDMA_TXD_INFO4_T;
-+
-+struct _QDMA_TXD_INFO4_
-+{
-+ unsigned int VLAN_TAG :17; // INSV(1)+VPRI(3)+CFI(1)+VID(12)
-+ unsigned int RESV : 2;
-+ unsigned int UDF : 6;
-+ unsigned int FPORT : 3;
-+ unsigned int TSO : 1;
-+ unsigned int TUI_CO : 3;
-+};
-+
-+
-+struct QDMA_txdesc {
-+ QDMA_TXD_INFO1_T txd_info1;
-+ QDMA_TXD_INFO2_T txd_info2;
-+ QDMA_TXD_INFO3_T txd_info3;
-+ QDMA_TXD_INFO4_T txd_info4;
-+#ifdef CONFIG_32B_DESC
-+ unsigned int txd_info5;
-+ unsigned int txd_info6;
-+ unsigned int txd_info7;
-+ unsigned int txd_info8;
-+#endif
-+};
-+#endif
-+
-+#define phys_to_bus(a) (a & 0x1FFFFFFF)
-+
-+#define PHY_Enable_Auto_Nego 0x1000
-+#define PHY_Restart_Auto_Nego 0x0200
-+
-+/* PHY_STAT_REG = 1; */
-+#define PHY_Auto_Neco_Comp 0x0020
-+#define PHY_Link_Status 0x0004
-+
-+/* PHY_AUTO_NEGO_REG = 4; */
-+#define PHY_Cap_10_Half 0x0020
-+#define PHY_Cap_10_Full 0x0040
-+#define PHY_Cap_100_Half 0x0080
-+#define PHY_Cap_100_Full 0x0100
-+
-+/* proc definition */
-+
-+#if !defined (CONFIG_RALINK_RT6855) && !defined(CONFIG_RALINK_RT6855A) && \
-+ !defined (CONFIG_RALINK_MT7620) && !defined (CONFIG_RALINK_MT7621)
-+#define CDMA_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x4c)
-+#define GDMA1_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x50)
-+#define PPE_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x54)
-+#define PSE_IQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x58)
-+#endif
-+
-+#define PROCREG_CONTROL_FILE "/var/run/procreg_control"
-+#if defined (CONFIG_RALINK_RT2880)
-+#define PROCREG_DIR "rt2880"
-+#elif defined (CONFIG_RALINK_RT3052)
-+#define PROCREG_DIR "rt3052"
-+#elif defined (CONFIG_RALINK_RT3352)
-+#define PROCREG_DIR "rt3352"
-+#elif defined (CONFIG_RALINK_RT5350)
-+#define PROCREG_DIR "rt5350"
-+#elif defined (CONFIG_RALINK_RT2883)
-+#define PROCREG_DIR "rt2883"
-+#elif defined (CONFIG_RALINK_RT3883)
-+#define PROCREG_DIR "rt3883"
-+#elif defined (CONFIG_RALINK_RT6855)
-+#define PROCREG_DIR "rt6855"
-+#elif defined (CONFIG_RALINK_MT7620)
-+#define PROCREG_DIR "mt7620"
-+#elif defined (CONFIG_RALINK_MT7621)
-+#define PROCREG_DIR "mt7621"
-+#elif defined (CONFIG_RALINK_MT7628)
-+#define PROCREG_DIR "mt7628"
-+#elif defined (CONFIG_RALINK_RT6855A)
-+#define PROCREG_DIR "rt6855a"
-+#else
-+#define PROCREG_DIR "rt2880"
-+#endif
-+#define PROCREG_SKBFREE "skb_free"
-+#define PROCREG_TXRING "tx_ring"
-+#define PROCREG_RXRING "rx_ring"
-+#define PROCREG_NUM_OF_TXD "num_of_txd"
-+#define PROCREG_TSO_LEN "tso_len"
-+#define PROCREG_LRO_STATS "lro_stats"
-+#define PROCREG_GMAC "gmac"
-+#define PROCREG_GMAC2 "gmac2"
-+#define PROCREG_CP0 "cp0"
-+#define PROCREG_RAQOS "qos"
-+#define PROCREG_READ_VAL "regread_value"
-+#define PROCREG_WRITE_VAL "regwrite_value"
-+#define PROCREG_ADDR "reg_addr"
-+#define PROCREG_CTL "procreg_control"
-+#define PROCREG_RXDONE_INTR "rxdone_intr_count"
-+#define PROCREG_ESW_INTR "esw_intr_count"
-+#define PROCREG_ESW_CNT "esw_cnt"
-+#define PROCREG_SNMP "snmp"
-+#if defined (TASKLET_WORKQUEUE_SW)
-+#define PROCREG_SCHE "schedule"
-+#endif
-+#define PROCREG_QDMA "qdma"
-+
-+struct rt2880_reg_op_data {
-+ char name[64];
-+ unsigned int reg_addr;
-+ unsigned int op;
-+ unsigned int reg_value;
-+};
-+
-+#ifdef CONFIG_RAETH_LRO
-+struct lro_counters {
-+ u32 lro_aggregated;
-+ u32 lro_flushed;
-+ u32 lro_no_desc;
-+};
-+
-+struct lro_para_struct {
-+ unsigned int lan_ip1;
-+};
-+
-+#endif // CONFIG_RAETH_LRO //
-+
-+
-+
-+
-+typedef struct end_device
-+{
-+
-+ unsigned int tx_cpu_owner_idx0;
-+ unsigned int rx_cpu_owner_idx0;
-+ unsigned int fe_int_status;
-+ unsigned int tx_full;
-+
-+#if !defined (CONFIG_RAETH_QDMA)
-+ unsigned int phy_tx_ring0;
-+#else
-+ /* QDMA Tx PTR */
-+ struct sk_buff *free_skb[NUM_TX_DESC];
-+ unsigned int tx_dma_ptr;
-+ unsigned int tx_cpu_ptr;
-+ unsigned int free_txd_num;
-+ unsigned int free_txd_head;
-+ unsigned int free_txd_tail;
-+ struct QDMA_txdesc *txd_pool;
-+ dma_addr_t phy_txd_pool;
-+// unsigned int phy_txd_pool;
-+ unsigned int txd_pool_info[NUM_TX_DESC];
-+#endif
-+
-+ unsigned int phy_rx_ring0, phy_rx_ring1;
-+
-+#if defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || \
-+ defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || \
-+ defined(CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7620) || \
-+ defined(CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
-+ //send signal to user application to notify link status changed
-+ struct work_struct kill_sig_wq;
-+#endif
-+
-+ struct work_struct reset_task;
-+#ifdef WORKQUEUE_BH
-+ struct work_struct rx_wq;
-+#else
-+#if defined (TASKLET_WORKQUEUE_SW)
-+ struct work_struct rx_wq;
-+#endif
-+#endif // WORKQUEUE_BH //
-+
-+#if defined(CONFIG_RAETH_QOS)
-+ struct sk_buff * skb_free[NUM_TX_RINGS][NUM_TX_DESC];
-+ unsigned int free_idx[NUM_TX_RINGS];
-+#else
-+ struct sk_buff* skb_free[NUM_TX_DESC];
-+ unsigned int free_idx;
-+#endif
-+
-+ struct net_device_stats stat; /* The new statistics table. */
-+ spinlock_t page_lock; /* Page register locks */
-+ struct PDMA_txdesc *tx_ring0;
-+#if defined(CONFIG_RAETH_QOS)
-+ struct PDMA_txdesc *tx_ring1;
-+ struct PDMA_txdesc *tx_ring2;
-+ struct PDMA_txdesc *tx_ring3;
-+#endif
-+ struct PDMA_rxdesc *rx_ring0;
-+ struct sk_buff *netrx0_skbuf[NUM_RX_DESC];
-+#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
-+ struct PDMA_rxdesc *rx_ring1;
-+ struct sk_buff *netrx1_skbuf[NUM_RX_DESC];
-+#endif
-+#ifdef CONFIG_RAETH_NAPI
-+ atomic_t irq_sem;
-+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,35)
-+ struct napi_struct napi;
-+#endif
-+#endif
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+ struct net_device *PseudoDev;
-+ unsigned int isPseudo;
-+#endif
-+#if defined (CONFIG_ETHTOOL) /*&& defined (CONFIG_RAETH_ROUTER)*/
-+ struct mii_if_info mii_info;
-+#endif
-+#ifdef CONFIG_RAETH_LRO
-+ struct lro_counters lro_counters;
-+ struct net_lro_mgr lro_mgr;
-+ struct net_lro_desc lro_arr[8];
-+#endif
-+#ifdef CONFIG_RAETH_HW_VLAN_RX
-+ struct vlan_group *vlgrp;
-+#endif
-+} END_DEVICE, *pEND_DEVICE;
-+
-+
-+#define RAETH_VERSION "v3.0"
-+
-+#endif
-+
-+#ifdef CONFIG_RAETH_QDMA
-+#define DMA_GLO_CFG QDMA_GLO_CFG
-+#define GDMA1_FWD_PORT 0x5555
-+#define GDMA2_FWD_PORT 0x5555
-+#define RAETH_RX_CALC_IDX0 QRX_CRX_IDX_0
-+#define RAETH_RX_CALC_IDX1 QRX_CRX_IDX_1
-+#define RAETH_FE_INT_STATUS QFE_INT_STATUS
-+#define RAETH_FE_INT_ALL QFE_INT_ALL
-+#define RAETH_FE_INT_ENABLE QFE_INT_ENABLE
-+#define RAETH_FE_INT_DLY_INIT QFE_INT_DLY_INIT
-+#define RAETH_FE_INT_SETTING RX_DONE_INT0 | RX_DONE_INT1 | RLS_DONE_INT
-+#define RAETH_TX_DLY_INT RLS_DLY_INT
-+#define RAETH_TX_DONE_INT0 RLS_DONE_INT
-+#define RAETH_DLY_INT_CFG QDMA_DELAY_INT
-+#else
-+#define DMA_GLO_CFG PDMA_GLO_CFG
-+#define GDMA1_FWD_PORT 0x0000
-+#define GDMA2_FWD_PORT 0x0000
-+#define RAETH_RX_CALC_IDX0 RX_CALC_IDX0
-+#define RAETH_RX_CALC_IDX1 RX_CALC_IDX1
-+#define RAETH_FE_INT_STATUS FE_INT_STATUS
-+#define RAETH_FE_INT_ALL FE_INT_ALL
-+#define RAETH_FE_INT_ENABLE FE_INT_ENABLE
-+#define RAETH_FE_INT_DLY_INIT FE_INT_DLY_INIT
-+#define RAETH_FE_INT_SETTING RX_DONE_INT0 | RX_DONE_INT1 | TX_DONE_INT0 | TX_DONE_INT1 | TX_DONE_INT2 | TX_DONE_INT3
-+#define RAETH_TX_DLY_INT TX_DLY_INT
-+#define RAETH_TX_DONE_INT0 TX_DONE_INT0
-+#define RAETH_DLY_INT_CFG DLY_INT_CFG
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/ra_ioctl.h
-@@ -0,0 +1,92 @@
-+#ifndef _RAETH_IOCTL_H
-+#define _RAETH_IOCTL_H
-+
-+/* ioctl commands */
-+#define RAETH_ESW_REG_READ 0x89F1
-+#define RAETH_ESW_REG_WRITE 0x89F2
-+#define RAETH_MII_READ 0x89F3
-+#define RAETH_MII_WRITE 0x89F4
-+#define RAETH_ESW_INGRESS_RATE 0x89F5
-+#define RAETH_ESW_EGRESS_RATE 0x89F6
-+#define RAETH_ESW_PHY_DUMP 0x89F7
-+#define RAETH_QDMA_REG_READ 0x89F8
-+#define RAETH_QDMA_REG_WRITE 0x89F9
-+#define RAETH_QDMA_QUEUE_MAPPING 0x89FA
-+#define RAETH_QDMA_READ_CPU_CLK 0x89FB
-+
-+#if defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7621)
-+
-+#define REG_ESW_WT_MAC_MFC 0x10
-+#define REG_ESW_WT_MAC_ATA1 0x74
-+#define REG_ESW_WT_MAC_ATA2 0x78
-+#define REG_ESW_WT_MAC_ATWD 0x7C
-+#define REG_ESW_WT_MAC_ATC 0x80
-+
-+#define REG_ESW_TABLE_TSRA1 0x84
-+#define REG_ESW_TABLE_TSRA2 0x88
-+#define REG_ESW_TABLE_ATRD 0x8C
-+
-+
-+#define REG_ESW_VLAN_VTCR 0x90
-+#define REG_ESW_VLAN_VAWD1 0x94
-+#define REG_ESW_VLAN_VAWD2 0x98
-+
-+
-+#define REG_ESW_VLAN_ID_BASE 0x100
-+
-+//#define REG_ESW_VLAN_ID_BASE 0x50
-+#define REG_ESW_VLAN_MEMB_BASE 0x70
-+#define REG_ESW_TABLE_SEARCH 0x24
-+#define REG_ESW_TABLE_STATUS0 0x28
-+#define REG_ESW_TABLE_STATUS1 0x2C
-+#define REG_ESW_TABLE_STATUS2 0x30
-+#define REG_ESW_WT_MAC_AD0 0x34
-+#define REG_ESW_WT_MAC_AD1 0x38
-+#define REG_ESW_WT_MAC_AD2 0x3C
-+
-+#else
-+/* rt3052 embedded ethernet switch registers */
-+#define REG_ESW_VLAN_ID_BASE 0x50
-+#define REG_ESW_VLAN_MEMB_BASE 0x70
-+#define REG_ESW_TABLE_SEARCH 0x24
-+#define REG_ESW_TABLE_STATUS0 0x28
-+#define REG_ESW_TABLE_STATUS1 0x2C
-+#define REG_ESW_TABLE_STATUS2 0x30
-+#define REG_ESW_WT_MAC_AD0 0x34
-+#define REG_ESW_WT_MAC_AD1 0x38
-+#define REG_ESW_WT_MAC_AD2 0x3C
-+#endif
-+
-+
-+#if defined(CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628)
-+#define REG_ESW_MAX 0x16C
-+#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620)
-+#define REG_ESW_MAX 0x7FFFF
-+#else //RT305x, RT3350
-+#define REG_ESW_MAX 0xFC
-+#endif
-+#define REG_HQOS_MAX 0x3FFF
-+
-+
-+typedef struct rt3052_esw_reg {
-+ unsigned int off;
-+ unsigned int val;
-+} esw_reg;
-+
-+typedef struct ralink_mii_ioctl_data {
-+ __u32 phy_id;
-+ __u32 reg_num;
-+ __u32 val_in;
-+ __u32 val_out;
-+} ra_mii_ioctl_data;
-+
-+typedef struct rt335x_esw_reg {
-+ unsigned int on_off;
-+ unsigned int port;
-+ unsigned int bw;/*Mbps*/
-+} esw_rate;
-+
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/ra_mac.c
-@@ -0,0 +1,98 @@
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/fcntl.h>
-+#include <linux/interrupt.h>
-+#include <linux/ptrace.h>
-+#include <linux/ioport.h>
-+#include <linux/in.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+#include <linux/signal.h>
-+#include <linux/irq.h>
-+#include <linux/ctype.h>
-+
-+#include <asm/io.h>
-+#include <asm/bitops.h>
-+#include <asm/io.h>
-+#include <asm/dma.h>
-+
-+#include <asm/rt2880/surfboardint.h> /* for cp0 reg access, added by bobtseng */
-+
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+//#include <linux/mca.h>
-+
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/proc_fs.h>
-+#include <asm/uaccess.h>
-+
-+#if defined(CONFIG_USER_SNMPD)
-+#include <linux/seq_file.h>
-+#endif
-+
-+
-+
-+#include "ra2882ethreg.h"
-+#include "raether.h"
-+#include "ra_mac.h"
-+
-+extern struct net_device *dev_raether;
-+
-+
-+void ra2880stop(END_DEVICE *ei_local)
-+{
-+ unsigned int regValue;
-+ printk("ra2880stop()...");
-+
-+ regValue = sysRegRead(PDMA_GLO_CFG);
-+ regValue &= ~(TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN);
-+ sysRegWrite(PDMA_GLO_CFG, regValue);
-+ printk("-> %s 0x%08x 0x%08x\n", "PDMA_GLO_CFG", PDMA_GLO_CFG, regValue);
-+ printk("Done\n");
-+}
-+
-+void ei_irq_clear(void)
-+{
-+ sysRegWrite(FE_INT_STATUS, 0xFFFFFFFF);
-+ printk("-> %s 0x%08x 0x%08x\n", "FE_INT_STATUS", FE_INT_STATUS, 0xFFFFFFFF);
-+}
-+
-+void rt2880_gmac_hard_reset(void)
-+{
-+ sysRegWrite(RSTCTRL, RALINK_FE_RST);
-+ printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, RALINK_FE_RST);
-+ sysRegWrite(RSTCTRL, 0);
-+ printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, 0);
-+}
-+
-+void ra2880EnableInterrupt()
-+{
-+ unsigned int regValue = sysRegRead(FE_INT_ENABLE);
-+ sysRegWrite(FE_INT_ENABLE, regValue);
-+ printk("-> %s 0x%08x 0x%08x\n", "FE_INT_ENABLE", FE_INT_ENABLE, regValue);
-+}
-+
-+void ra2880MacAddressSet(unsigned char p[6])
-+{
-+ unsigned long regValue;
-+
-+ regValue = (p[0] << 8) | (p[1]);
-+ sysRegWrite(GDMA1_MAC_ADRH, regValue);
-+ printk("-> %s 0x%08x 0x%08x\n", "GDMA1_MAC_ADRH", GDMA1_MAC_ADRH, regValue);
-+
-+ regValue = (p[2] << 24) | (p[3] <<16) | (p[4] << 8) | p[5];
-+ printk("-> %s 0x%08x 0x%08x\n", "GDMA1_MAC_ADRL", GDMA1_MAC_ADRL, regValue);
-+ sysRegWrite(GDMA1_MAC_ADRL, regValue);
-+
-+ return;
-+}
-+
-+
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/ra_mac.h
-@@ -0,0 +1,35 @@
-+#ifndef RA_MAC_H
-+#define RA_MAC_H
-+
-+void ra2880stop(END_DEVICE *ei_local);
-+void ra2880MacAddressSet(unsigned char p[6]);
-+void ra2880Mac2AddressSet(unsigned char p[6]);
-+void ethtool_init(struct net_device *dev);
-+
-+void ra2880EnableInterrupt(void);
-+
-+void dump_qos(void);
-+void dump_reg(void);
-+void dump_cp0(void);
-+
-+int debug_proc_init(void);
-+void debug_proc_exit(void);
-+
-+#if defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7621)
-+void enable_auto_negotiate(int unused);
-+#else
-+void enable_auto_negotiate(int ge);
-+#endif
-+
-+void rt2880_gmac_hard_reset(void);
-+
-+int TsoLenUpdate(int tso_len);
-+int NumOfTxdUpdate(int num_of_txd);
-+
-+#ifdef CONFIG_RAETH_LRO
-+int LroStatsUpdate(struct net_lro_mgr *lro_mgr, bool all_flushed);
-+#endif
-+int getnext(const char *src, int separator, char *dest);
-+int str_to_ip(unsigned int *ip, const char *str);
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/raether.c
-@@ -0,0 +1,692 @@
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/if_vlan.h>
-+#include <linux/if_ether.h>
-+#include <linux/fs.h>
-+#include <asm/uaccess.h>
-+#include <linux/delay.h>
-+#include <linux/sched.h>
-+
-+#include <asm/rt2880/rt_mmap.h>
-+#include "ra2882ethreg.h"
-+#include "raether.h"
-+#include "ra_mac.h"
-+#include "ra_ioctl.h"
-+
-+static int rt2880_eth_recv(struct net_device* dev);
-+int reg_dbg = 0;
-+
-+void setup_internal_gsw(void);
-+
-+#define MAX_RX_LENGTH 1536
-+
-+struct net_device *dev_raether;
-+
-+static int rx_dma_owner_idx;
-+static int rx_dma_owner_idx0;
-+static int pending_recv;
-+static struct PDMA_rxdesc *rx_ring;
-+static unsigned long tx_ring_full=0;
-+
-+#define KSEG1 0xa0000000
-+#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1))
-+#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1)
-+
-+extern int fe_dma_init(struct net_device *dev);
-+extern int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no);
-+extern void ei_xmit_housekeeping(unsigned long unused);
-+extern inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no);
-+
-+static int ei_set_mac_addr(struct net_device *dev, void *p)
-+{
-+ struct sockaddr *addr = p;
-+
-+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-+
-+ if(netif_running(dev))
-+ return -EBUSY;
-+
-+ ra2880MacAddressSet(addr->sa_data);
-+ return 0;
-+}
-+
-+
-+void set_fe_dma_glo_cfg(void)
-+{
-+ int dma_glo_cfg=0;
-+
-+ dma_glo_cfg = (TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN | PDMA_BT_SIZE_16DWORDS);
-+
-+ dma_glo_cfg |= (RX_2B_OFFSET);
-+
-+ sysRegWrite(DMA_GLO_CFG, dma_glo_cfg);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "DMA_GLO_CFG", DMA_GLO_CFG, dma_glo_cfg);
-+}
-+
-+int forward_config(struct net_device *dev)
-+{
-+ unsigned int regVal, regCsg;
-+
-+ regVal = sysRegRead(GDMA1_FWD_CFG);
-+ regCsg = sysRegRead(CDMA_CSG_CFG);
-+
-+ //set unicast/multicast/broadcast frame to cpu
-+ regVal &= ~0xFFFF;
-+ regVal |= GDMA1_FWD_PORT;
-+ regCsg &= ~0x7;
-+
-+ //disable ipv4 header checksum check
-+ regVal &= ~GDM1_ICS_EN;
-+ regCsg &= ~ICS_GEN_EN;
-+
-+ //disable tcp checksum check
-+ regVal &= ~GDM1_TCS_EN;
-+ regCsg &= ~TCS_GEN_EN;
-+
-+ //disable udp checksum check
-+ regVal &= ~GDM1_UCS_EN;
-+ regCsg &= ~UCS_GEN_EN;
-+
-+
-+ dev->features &= ~NETIF_F_IP_CSUM; /* disable checksum TCP/UDP over IPv4 */
-+
-+
-+ sysRegWrite(GDMA1_FWD_CFG, regVal);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "GDMA1_FWD_CFG", GDMA1_FWD_CFG, regVal);
-+ sysRegWrite(CDMA_CSG_CFG, regCsg);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "CDMA_CSG_CFG", CDMA_CSG_CFG, regCsg);
-+
-+ regVal = 0x1;
-+ sysRegWrite(FE_RST_GL, regVal);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "FE_RST_GL", FE_RST_GL, regVal);
-+ sysRegWrite(FE_RST_GL, 0); // update for RSTCTL issue
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "FE_RST_GL", FE_RST_GL, 1);
-+
-+ regCsg = sysRegRead(CDMA_CSG_CFG);
-+ printk("CDMA_CSG_CFG = %0X\n",regCsg);
-+ regVal = sysRegRead(GDMA1_FWD_CFG);
-+ printk("GDMA1_FWD_CFG = %0X\n",regVal);
-+
-+ return 1;
-+}
-+
-+
-+static int rt2880_eth_recv(struct net_device* dev)
-+{
-+ struct sk_buff *skb, *rx_skb;
-+ unsigned int length = 0;
-+ unsigned long RxProcessed;
-+
-+
-+ int bReschedule = 0;
-+ END_DEVICE* ei_local = netdev_priv(dev);
-+
-+
-+
-+ RxProcessed = 0;
-+
-+ rx_dma_owner_idx0 = (sysRegRead(RAETH_RX_CALC_IDX0) + 1) % NUM_RX_DESC;
-+
-+ for ( ; ; ) {
-+
-+ if (RxProcessed++ > NUM_RX_MAX_PROCESS)
-+ {
-+ // need to reschedule rx handle
-+ bReschedule = 1;
-+ break;
-+ }
-+
-+
-+
-+ if (ei_local->rx_ring0[rx_dma_owner_idx0].rxd_info2.DDONE_bit == 1) {
-+ rx_ring = ei_local->rx_ring0;
-+ rx_dma_owner_idx = rx_dma_owner_idx0;
-+ } else {
-+ break;
-+ }
-+
-+ /* skb processing */
-+ length = rx_ring[rx_dma_owner_idx].rxd_info2.PLEN0;
-+ rx_skb = ei_local->netrx0_skbuf[rx_dma_owner_idx];
-+ rx_skb->data = ei_local->netrx0_skbuf[rx_dma_owner_idx]->data;
-+ rx_skb->len = length;
-+
-+ rx_skb->data += NET_IP_ALIGN;
-+
-+ rx_skb->tail = rx_skb->data + length;
-+
-+ rx_skb->dev = dev;
-+ rx_skb->protocol = eth_type_trans(rx_skb,dev);
-+
-+ rx_skb->ip_summed = CHECKSUM_NONE;
-+
-+
-+ /* We have to check the free memory size is big enough
-+ * before pass the packet to cpu*/
-+ skb = __dev_alloc_skb(MAX_RX_LENGTH + NET_IP_ALIGN, GFP_ATOMIC);
-+
-+ if (unlikely(skb == NULL))
-+ {
-+ printk(KERN_ERR "skb not available...\n");
-+ ei_local->stat.rx_dropped++;
-+ bReschedule = 1;
-+ break;
-+ }
-+
-+ {
-+ netif_rx(rx_skb);
-+ }
-+
-+ {
-+ ei_local->stat.rx_packets++;
-+ ei_local->stat.rx_bytes += length;
-+ }
-+
-+
-+ rx_ring[rx_dma_owner_idx].rxd_info2.PLEN0 = MAX_RX_LENGTH;
-+ rx_ring[rx_dma_owner_idx].rxd_info2.LS0 = 0;
-+ rx_ring[rx_dma_owner_idx].rxd_info2.DDONE_bit = 0;
-+ rx_ring[rx_dma_owner_idx].rxd_info1.PDP0 = dma_map_single(NULL, skb->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
-+
-+ /* Move point to next RXD which wants to alloc*/
-+ sysRegWrite(RAETH_RX_CALC_IDX0, rx_dma_owner_idx);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RAETH_RX_CALC_IDX0", RAETH_RX_CALC_IDX0, rx_dma_owner_idx);
-+ ei_local->netrx0_skbuf[rx_dma_owner_idx] = skb;
-+
-+ /* Update to Next packet point that was received.
-+ */
-+ rx_dma_owner_idx0 = (sysRegRead(RAETH_RX_CALC_IDX0) + 1) % NUM_RX_DESC;
-+ } /* for */
-+
-+ return bReschedule;
-+}
-+
-+void ei_receive_workq(struct work_struct *work)
-+{
-+ struct net_device *dev = dev_raether;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ unsigned long reg_int_mask=0;
-+ int bReschedule=0;
-+
-+
-+ if(tx_ring_full==0){
-+ bReschedule = rt2880_eth_recv(dev);
-+ if(bReschedule)
-+ {
-+ schedule_work(&ei_local->rx_wq);
-+ }else{
-+ reg_int_mask=sysRegRead(RAETH_FE_INT_ENABLE);
-+ sysRegWrite(RAETH_FE_INT_ENABLE, reg_int_mask| RX_DLY_INT);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, reg_int_mask| RX_DLY_INT);
-+ }
-+ }else{
-+ schedule_work(&ei_local->rx_wq);
-+ }
-+}
-+
-+
-+static irqreturn_t ei_interrupt(int irq, void *dev_id)
-+{
-+ unsigned long reg_int_val;
-+ unsigned long reg_int_mask=0;
-+ unsigned int recv = 0;
-+ unsigned int transmit __maybe_unused = 0;
-+ unsigned long flags;
-+
-+ struct net_device *dev = (struct net_device *) dev_id;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+
-+ if (dev == NULL)
-+ {
-+ printk (KERN_ERR "net_interrupt(): irq %x for unknown device.\n", IRQ_ENET0);
-+ return IRQ_NONE;
-+ }
-+
-+
-+ spin_lock_irqsave(&(ei_local->page_lock), flags);
-+ reg_int_val = sysRegRead(RAETH_FE_INT_STATUS);
-+
-+ if((reg_int_val & RX_DLY_INT))
-+ recv = 1;
-+
-+ if (reg_int_val & RAETH_TX_DLY_INT)
-+ transmit = 1;
-+
-+ sysRegWrite(RAETH_FE_INT_STATUS, RAETH_FE_INT_DLY_INIT);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_STATUS", RAETH_FE_INT_STATUS, RAETH_FE_INT_DLY_INIT);
-+
-+ ei_xmit_housekeeping(0);
-+
-+ if (((recv == 1) || (pending_recv ==1)) && (tx_ring_full==0))
-+ {
-+ reg_int_mask = sysRegRead(RAETH_FE_INT_ENABLE);
-+ sysRegWrite(RAETH_FE_INT_ENABLE, reg_int_mask & ~(RX_DLY_INT));
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, reg_int_mask & ~(RX_DLY_INT));
-+ pending_recv=0;
-+ schedule_work(&ei_local->rx_wq);
-+ }
-+ else if (recv == 1 && tx_ring_full==1)
-+ {
-+ pending_recv=1;
-+ }
-+ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void esw_link_status_changed(int port_no, void *dev_id)
-+{
-+ unsigned int reg_val;
-+ mii_mgr_read(31, (0x3008 + (port_no*0x100)), ®_val);
-+ if(reg_val & 0x1) {
-+ printk("ESW: Link Status Changed - Port%d Link UP\n", port_no);
-+ } else {
-+ printk("ESW: Link Status Changed - Port%d Link Down\n", port_no);
-+ }
-+}
-+
-+
-+static irqreturn_t esw_interrupt(int irq, void *dev_id)
-+{
-+ unsigned long flags;
-+ unsigned int reg_int_val;
-+ struct net_device *dev = (struct net_device *) dev_id;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+
-+ spin_lock_irqsave(&(ei_local->page_lock), flags);
-+ mii_mgr_read(31, 0x700c, ®_int_val);
-+
-+ if (reg_int_val & P4_LINK_CH) {
-+ esw_link_status_changed(4, dev_id);
-+ }
-+
-+ if (reg_int_val & P3_LINK_CH) {
-+ esw_link_status_changed(3, dev_id);
-+ }
-+ if (reg_int_val & P2_LINK_CH) {
-+ esw_link_status_changed(2, dev_id);
-+ }
-+ if (reg_int_val & P1_LINK_CH) {
-+ esw_link_status_changed(1, dev_id);
-+ }
-+ if (reg_int_val & P0_LINK_CH) {
-+ esw_link_status_changed(0, dev_id);
-+ }
-+
-+ mii_mgr_write(31, 0x700c, 0x1f); //ack switch link change
-+ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
-+ return IRQ_HANDLED;
-+}
-+
-+
-+
-+static int ei_start_xmit_fake(struct sk_buff* skb, struct net_device *dev)
-+{
-+ return ei_start_xmit(skb, dev, 1);
-+}
-+
-+static int ei_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+ unsigned long flags;
-+ END_DEVICE *ei_local = netdev_priv(dev); // get priv ei_local pointer from net_dev structure
-+
-+ if ( ei_local == NULL ) {
-+ printk(KERN_EMERG "%s: ei_change_mtu passed a non-existent private pointer from net_dev!\n", dev->name);
-+ return -ENXIO;
-+ }
-+
-+ spin_lock_irqsave(&ei_local->page_lock, flags);
-+
-+ if ( (new_mtu > 4096) || (new_mtu < 64)) {
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return -EINVAL;
-+ }
-+
-+ if ( new_mtu > 1500 ) {
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return -EINVAL;
-+ }
-+
-+ dev->mtu = new_mtu;
-+
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return 0;
-+}
-+
-+
-+static const struct net_device_ops ei_netdev_ops = {
-+ .ndo_init = rather_probe,
-+ .ndo_open = ei_open,
-+ .ndo_stop = ei_close,
-+ .ndo_start_xmit = ei_start_xmit_fake,
-+ .ndo_set_mac_address = eth_mac_addr,
-+ .ndo_change_mtu = ei_change_mtu,
-+ .ndo_validate_addr = eth_validate_addr,
-+};
-+
-+void ra2880_setup_dev_fptable(struct net_device *dev)
-+{
-+ RAETH_PRINT(__FUNCTION__ "is called!\n");
-+
-+ dev->netdev_ops = &ei_netdev_ops;
-+#define TX_TIMEOUT (5*HZ)
-+ dev->watchdog_timeo = TX_TIMEOUT;
-+
-+}
-+
-+void fe_reset(void)
-+{
-+ u32 val;
-+ val = sysRegRead(RSTCTRL);
-+
-+ val = val | RALINK_FE_RST;
-+ sysRegWrite(RSTCTRL, val);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, val);
-+ val = val & ~(RALINK_FE_RST);
-+ sysRegWrite(RSTCTRL, val);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, val);
-+}
-+
-+void ei_reset_task(struct work_struct *work)
-+{
-+ struct net_device *dev = dev_raether;
-+
-+ ei_close(dev);
-+ ei_open(dev);
-+
-+ return;
-+}
-+
-+void ei_tx_timeout(struct net_device *dev)
-+{
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+
-+ schedule_work(&ei_local->reset_task);
-+}
-+
-+int __init rather_probe(struct net_device *dev)
-+{
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ struct sockaddr addr;
-+ unsigned char mac_addr01234[5] = {0x00, 0x0C, 0x43, 0x28, 0x80};
-+
-+ fe_reset();
-+ memcpy(addr.sa_data, mac_addr01234, 5);
-+ addr.sa_data[5] = prandom_u32()&0xFF;
-+ ei_set_mac_addr(dev, &addr);
-+ spin_lock_init(&ei_local->page_lock);
-+ ether_setup(dev);
-+
-+ return 0;
-+}
-+
-+
-+int ei_open(struct net_device *dev)
-+{
-+ int i, err;
-+ unsigned long flags;
-+ END_DEVICE *ei_local;
-+
-+
-+ if (!try_module_get(THIS_MODULE))
-+ {
-+ printk("%s: Cannot reserve module\n", __FUNCTION__);
-+ return -1;
-+ }
-+ printk("Raeth %s (",RAETH_VERSION);
-+ printk("Workqueue");
-+
-+ printk(")\n");
-+ ei_local = netdev_priv(dev); // get device pointer from System
-+ // unsigned int flags;
-+
-+ if (ei_local == NULL)
-+ {
-+ printk(KERN_EMERG "%s: ei_open passed a non-existent device!\n", dev->name);
-+ return -ENXIO;
-+ }
-+
-+ /* receiving packet buffer allocation - NUM_RX_DESC x MAX_RX_LENGTH */
-+ for ( i = 0; i < NUM_RX_DESC; i++)
-+ {
-+ ei_local->netrx0_skbuf[i] = dev_alloc_skb(MAX_RX_LENGTH + NET_IP_ALIGN);
-+ if (ei_local->netrx0_skbuf[i] == NULL ) {
-+ printk("rx skbuff buffer allocation failed!");
-+ } else {
-+ }
-+ }
-+
-+ spin_lock_irqsave(&(ei_local->page_lock), flags);
-+ fe_dma_init(dev);
-+ fe_sw_init(); //initialize fe and switch register
-+ err = request_irq( dev->irq, ei_interrupt, 0, dev->name, dev); // try to fix irq in open
-+ if (err)
-+ return err;
-+
-+ if ( dev->dev_addr != NULL) {
-+ ra2880MacAddressSet((void *)(dev->dev_addr));
-+ } else {
-+ printk("dev->dev_addr is empty !\n");
-+ }
-+ mii_mgr_write(31, 0x7008, 0x1f); //enable switch link change intr
-+ err = request_irq(31, esw_interrupt, IRQF_DISABLED, "Ralink_ESW", dev);
-+ if (err)
-+ return err;
-+
-+ sysRegWrite(RAETH_DLY_INT_CFG, DELAY_INT_INIT);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RAETH_DLY_INT_CFG", RAETH_DLY_INT_CFG, DELAY_INT_INIT);
-+ sysRegWrite(RAETH_FE_INT_ENABLE, RAETH_FE_INT_DLY_INIT);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, RAETH_FE_INT_DLY_INIT);
-+
-+ INIT_WORK(&ei_local->reset_task, ei_reset_task);
-+
-+ INIT_WORK(&ei_local->rx_wq, ei_receive_workq);
-+
-+ netif_start_queue(dev);
-+
-+
-+ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
-+
-+
-+ forward_config(dev);
-+ return 0;
-+}
-+
-+int ei_close(struct net_device *dev)
-+{
-+ int i;
-+ END_DEVICE *ei_local = netdev_priv(dev); // device pointer
-+ unsigned long flags;
-+ spin_lock_irqsave(&(ei_local->page_lock), flags);
-+
-+ cancel_work_sync(&ei_local->reset_task);
-+ netif_stop_queue(dev);
-+ ra2880stop(ei_local);
-+ msleep(10);
-+
-+ cancel_work_sync(&ei_local->rx_wq);
-+ free_irq(dev->irq, dev);
-+ free_irq(31, dev);
-+ for ( i = 0; i < NUM_RX_DESC; i++)
-+ {
-+ if (ei_local->netrx0_skbuf[i] != NULL) {
-+ dev_kfree_skb(ei_local->netrx0_skbuf[i]);
-+ ei_local->netrx0_skbuf[i] = NULL;
-+ }
-+ }
-+ if (ei_local->tx_ring0 != NULL) {
-+ pci_free_consistent(NULL, NUM_TX_DESC*sizeof(struct PDMA_txdesc), ei_local->tx_ring0, ei_local->phy_tx_ring0);
-+ }
-+ pci_free_consistent(NULL, NUM_RX_DESC*sizeof(struct PDMA_rxdesc), ei_local->rx_ring0, ei_local->phy_rx_ring0);
-+
-+ printk("Free TX/RX Ring Memory!\n");
-+
-+// fe_reset();
-+ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
-+
-+ module_put(THIS_MODULE);
-+ return 0;
-+}
-+
-+
-+void setup_internal_gsw(void)
-+{
-+ u32 i;
-+ u32 regValue;
-+
-+ /* reduce RGMII2 PAD driving strength */
-+ *(volatile u_long *)(PAD_RGMII2_MDIO_CFG) &= ~(0x3 << 4);
-+
-+ //RGMII1=Normal mode
-+ *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60) &= ~(0x1 << 14);
-+
-+ //GMAC1= RGMII mode
-+ *(volatile u_long *)(SYSCFG1) &= ~(0x3 << 12);
-+
-+ //enable MDIO to control MT7530
-+ regValue = le32_to_cpu(*(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60));
-+ regValue &= ~(0x3 << 12);
-+ *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60) = regValue;
-+
-+ for(i=0;i<=4;i++)
-+ {
-+ //turn off PHY
-+ mii_mgr_read(i, 0x0 ,®Value);
-+ regValue |= (0x1<<11);
-+ mii_mgr_write(i, 0x0, regValue);
-+ }
-+ mii_mgr_write(31, 0x7000, 0x3); //reset switch
-+ udelay(10);
-+
-+ if(sysRegRead(0xbe00000c)==0x00030101) {
-+ sysRegWrite(RALINK_ETH_SW_BASE+0x100, 0x2005e30b);//(GE1, Force 1000M/FD, FC ON)
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x100", RALINK_ETH_SW_BASE+0x100, 0x2005e30b);
-+ mii_mgr_write(31, 0x3600, 0x5e30b);
-+ } else {
-+ sysRegWrite(RALINK_ETH_SW_BASE+0x100, 0x2005e33b);//(GE1, Force 1000M/FD, FC ON)
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x100", RALINK_ETH_SW_BASE+0x100, 0x2005e33b);
-+ mii_mgr_write(31, 0x3600, 0x5e33b);
-+ }
-+
-+ sysRegWrite(RALINK_ETH_SW_BASE+0x200, 0x00008000);//(GE2, Link down)
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x200", RALINK_ETH_SW_BASE+0x200, 0x00008000);
-+
-+ //regValue = 0x117ccf; //Enable Port 6, P5 as GMAC5, P5 disable*/
-+ mii_mgr_read(31, 0x7804 ,®Value);
-+ regValue &= ~(1<<8); //Enable Port 6
-+ regValue |= (1<<6); //Disable Port 5
-+ regValue |= (1<<13); //Port 5 as GMAC, no Internal PHY
-+
-+ regValue |= (1<<16);//change HW-TRAP
-+ printk("change HW-TRAP to 0x%x!!!!!!!!!!!!",regValue);
-+ mii_mgr_write(31, 0x7804 ,regValue);
-+ regValue = *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x10);
-+ regValue = (regValue >> 6) & 0x7;
-+ if(regValue >= 6) { //25Mhz Xtal
-+ /* do nothing */
-+ } else if(regValue >=3) { //40Mhz
-+
-+ mii_mgr_write(0, 13, 0x1f); // disable MT7530 core clock
-+ mii_mgr_write(0, 14, 0x410);
-+ mii_mgr_write(0, 13, 0x401f);
-+ mii_mgr_write(0, 14, 0x0);
-+
-+ mii_mgr_write(0, 13, 0x1f); // disable MT7530 PLL
-+ mii_mgr_write(0, 14, 0x40d);
-+ mii_mgr_write(0, 13, 0x401f);
-+ mii_mgr_write(0, 14, 0x2020);
-+
-+ mii_mgr_write(0, 13, 0x1f); // for MT7530 core clock = 500Mhz
-+ mii_mgr_write(0, 14, 0x40e);
-+ mii_mgr_write(0, 13, 0x401f);
-+ mii_mgr_write(0, 14, 0x119);
-+
-+ mii_mgr_write(0, 13, 0x1f); // enable MT7530 PLL
-+ mii_mgr_write(0, 14, 0x40d);
-+ mii_mgr_write(0, 13, 0x401f);
-+ mii_mgr_write(0, 14, 0x2820);
-+
-+ udelay(20); //suggest by CD
-+
-+ mii_mgr_write(0, 13, 0x1f); // enable MT7530 core clock
-+ mii_mgr_write(0, 14, 0x410);
-+ mii_mgr_write(0, 13, 0x401f);
-+ }else { //20Mhz Xtal
-+
-+ /* TODO */
-+
-+ }
-+ mii_mgr_write(0, 14, 0x1); /*RGMII*/
-+
-+#if 1
-+ mii_mgr_write(31, 0x7b00, 0x102); //delay setting for 10/1000M
-+ mii_mgr_write(31, 0x7b04, 0x14); //delay setting for 10/1000M
-+#else
-+ mii_mgr_write(31, 0x7b00, 8); // delay setting for 100M
-+ mii_mgr_write(31, 0x7b04, 0x14); // for 100M
-+#endif
-+ /*Tx Driving*/
-+ mii_mgr_write(31, 0x7a54, 0x44); //lower driving
-+ mii_mgr_write(31, 0x7a5c, 0x44); //lower driving
-+ mii_mgr_write(31, 0x7a64, 0x44); //lower driving
-+ mii_mgr_write(31, 0x7a6c, 0x44); //lower driving
-+ mii_mgr_write(31, 0x7a74, 0x44); //lower driving
-+ mii_mgr_write(31, 0x7a7c, 0x44); //lower driving
-+
-+ for(i=0;i<=4;i++)
-+ {
-+ //turn on PHY
-+ mii_mgr_read(i, 0x0 ,®Value);
-+ regValue &= ~(0x1<<11);
-+ mii_mgr_write(i, 0x0, regValue);
-+ }
-+
-+ mii_mgr_read(31, 0x7808 ,®Value);
-+ regValue |= (3<<16); //Enable INTR
-+ mii_mgr_write(31, 0x7808 ,regValue);
-+}
-+
-+int __init ra2882eth_init(void)
-+{
-+ int ret;
-+ struct net_device *dev = alloc_etherdev(sizeof(END_DEVICE));
-+ if (!dev)
-+ return -ENOMEM;
-+
-+ strcpy(dev->name, DEV_NAME);
-+ dev->irq = IRQ_ENET0;
-+ dev->addr_len = 6;
-+ dev->base_addr = RALINK_FRAME_ENGINE_BASE;
-+
-+ rather_probe(dev);
-+ ra2880_setup_dev_fptable(dev);
-+
-+ if ( register_netdev(dev) != 0) {
-+ printk(KERN_WARNING " " __FILE__ ": No ethernet port found.\n");
-+ return -ENXIO;
-+ }
-+ ret = 0;
-+
-+ dev_raether = dev;
-+ return ret;
-+}
-+
-+void fe_sw_init(void)
-+{
-+ setup_internal_gsw();
-+}
-+
-+
-+void ra2882eth_cleanup_module(void)
-+{
-+}
-+EXPORT_SYMBOL(set_fe_dma_glo_cfg);
-+module_init(ra2882eth_init);
-+module_exit(ra2882eth_cleanup_module);
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/raether.h
-@@ -0,0 +1,92 @@
-+#ifndef RA2882ETHEND_H
-+#define RA2882ETHEND_H
-+
-+#ifdef DSP_VIA_NONCACHEABLE
-+#define ESRAM_BASE 0xa0800000 /* 0x0080-0000 ~ 0x00807FFF */
-+#else
-+#define ESRAM_BASE 0x80800000 /* 0x0080-0000 ~ 0x00807FFF */
-+#endif
-+
-+#define RX_RING_BASE ((int)(ESRAM_BASE + 0x7000))
-+#define TX_RING_BASE ((int)(ESRAM_BASE + 0x7800))
-+
-+#if defined(CONFIG_RALINK_RT2880)
-+#define NUM_TX_RINGS 1
-+#else
-+#define NUM_TX_RINGS 4
-+#endif
-+#ifdef MEMORY_OPTIMIZATION
-+#ifdef CONFIG_RAETH_ROUTER
-+#define NUM_RX_DESC 128
-+#define NUM_TX_DESC 128
-+#elif CONFIG_RT_3052_ESW
-+#define NUM_RX_DESC 64
-+#define NUM_TX_DESC 64
-+#else
-+#define NUM_RX_DESC 128
-+#define NUM_TX_DESC 128
-+#endif
-+//#define NUM_RX_MAX_PROCESS 32
-+#define NUM_RX_MAX_PROCESS 64
-+#else
-+#if defined (CONFIG_RAETH_ROUTER)
-+#define NUM_RX_DESC 256
-+#define NUM_TX_DESC 256
-+#elif defined (CONFIG_RT_3052_ESW)
-+#define NUM_RX_DESC 256
-+#define NUM_TX_DESC 256
-+#else
-+#define NUM_RX_DESC 256
-+#define NUM_TX_DESC 256
-+#endif
-+#if defined(CONFIG_RALINK_RT3883) || defined(CONFIG_RALINK_MT7620)
-+#define NUM_RX_MAX_PROCESS 2
-+#else
-+#define NUM_RX_MAX_PROCESS 16
-+#endif
-+#endif
-+
-+#define DEV_NAME "eth0"
-+#define DEV2_NAME "eth3"
-+
-+#if defined (CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7621)
-+#define GMAC0_OFFSET 0xE000
-+#define GMAC2_OFFSET 0xE006
-+#else
-+#define GMAC0_OFFSET 0x28
-+#define GMAC2_OFFSET 0x22
-+#endif
-+
-+#if defined(CONFIG_RALINK_RT6855A)
-+#define IRQ_ENET0 22
-+#else
-+#define IRQ_ENET0 11 /* hardware interrupt #3, defined in RT2880 Soc Design Spec Rev 0.03, pp43 */
-+#endif
-+
-+#define FE_INT_STATUS_REG (*(volatile unsigned long *)(FE_INT_STATUS))
-+#define FE_INT_STATUS_CLEAN(reg) (*(volatile unsigned long *)(FE_INT_STATUS)) = reg
-+
-+//#define RAETH_DEBUG
-+#ifdef RAETH_DEBUG
-+#define RAETH_PRINT(fmt, args...) printk(KERN_INFO fmt, ## args)
-+#else
-+#define RAETH_PRINT(fmt, args...) { }
-+#endif
-+
-+struct net_device_stats *ra_get_stats(struct net_device *dev);
-+
-+void ei_tx_timeout(struct net_device *dev);
-+int rather_probe(struct net_device *dev);
-+int ei_open(struct net_device *dev);
-+int ei_close(struct net_device *dev);
-+
-+int ra2882eth_init(void);
-+void ra2882eth_cleanup_module(void);
-+
-+void ei_xmit_housekeeping(unsigned long data);
-+
-+u32 mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data);
-+u32 mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data);
-+void fe_sw_init(void);
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/raether_pdma.c
-@@ -0,0 +1,212 @@
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/if_vlan.h>
-+#include <linux/if_ether.h>
-+#include <linux/fs.h>
-+#include <asm/uaccess.h>
-+#include <linux/delay.h>
-+#include <linux/sched.h>
-+#include <asm/rt2880/rt_mmap.h>
-+#include "ra2882ethreg.h"
-+#include "raether.h"
-+#include "ra_mac.h"
-+
-+#define MAX_RX_LENGTH 1536
-+
-+extern int reg_dbg;
-+extern struct net_device *dev_raether;
-+static unsigned long tx_ring_full=0;
-+
-+#define KSEG1 0xa0000000
-+#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1))
-+#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1)
-+
-+extern void set_fe_dma_glo_cfg(void);
-+
-+int fe_dma_init(struct net_device *dev)
-+{
-+
-+ int i;
-+ unsigned int regVal;
-+ END_DEVICE* ei_local = netdev_priv(dev);
-+
-+ while(1)
-+ {
-+ regVal = sysRegRead(PDMA_GLO_CFG);
-+ if((regVal & RX_DMA_BUSY))
-+ {
-+ printk("\n RX_DMA_BUSY !!! ");
-+ continue;
-+ }
-+ if((regVal & TX_DMA_BUSY))
-+ {
-+ printk("\n TX_DMA_BUSY !!! ");
-+ continue;
-+ }
-+ break;
-+ }
-+
-+ for (i=0;i<NUM_TX_DESC;i++){
-+ ei_local->skb_free[i]=0;
-+ }
-+ ei_local->free_idx =0;
-+ ei_local->tx_ring0 = pci_alloc_consistent(NULL, NUM_TX_DESC * sizeof(struct PDMA_txdesc), &ei_local->phy_tx_ring0);
-+ printk("\nphy_tx_ring = 0x%08x, tx_ring = 0x%p\n", ei_local->phy_tx_ring0, ei_local->tx_ring0);
-+
-+ for (i=0; i < NUM_TX_DESC; i++) {
-+ memset(&ei_local->tx_ring0[i],0,sizeof(struct PDMA_txdesc));
-+ ei_local->tx_ring0[i].txd_info2.LS0_bit = 1;
-+ ei_local->tx_ring0[i].txd_info2.DDONE_bit = 1;
-+
-+ }
-+
-+ /* Initial RX Ring 0*/
-+ ei_local->rx_ring0 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring0);
-+ for (i = 0; i < NUM_RX_DESC; i++) {
-+ memset(&ei_local->rx_ring0[i],0,sizeof(struct PDMA_rxdesc));
-+ ei_local->rx_ring0[i].rxd_info2.DDONE_bit = 0;
-+ ei_local->rx_ring0[i].rxd_info2.LS0 = 0;
-+ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH;
-+ ei_local->rx_ring0[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx0_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
-+ }
-+ printk("\nphy_rx_ring0 = 0x%08x, rx_ring0 = 0x%p\n",ei_local->phy_rx_ring0,ei_local->rx_ring0);
-+
-+
-+ regVal = sysRegRead(PDMA_GLO_CFG);
-+ regVal &= 0x000000FF;
-+ sysRegWrite(PDMA_GLO_CFG, regVal);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "PDMA_GLO_CFG", PDMA_GLO_CFG, regVal);
-+
-+ regVal=sysRegRead(PDMA_GLO_CFG);
-+
-+ /* Tell the adapter where the TX/RX rings are located. */
-+ sysRegWrite(TX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_tx_ring0));
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_BASE_PTR0", TX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_tx_ring0));
-+ sysRegWrite(TX_MAX_CNT0, cpu_to_le32((u32) NUM_TX_DESC));
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_MAX_CNT0", TX_MAX_CNT0, cpu_to_le32((u32) NUM_TX_DESC));
-+ sysRegWrite(TX_CTX_IDX0, 0);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_CTX_IDX0", TX_CTX_IDX0, 0);
-+ sysRegWrite(PDMA_RST_CFG, PST_DTX_IDX0);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "PDMA_RST_CFG", PDMA_RST_CFG, PST_DTX_IDX0);
-+
-+ sysRegWrite(RX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_rx_ring0));
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_BASE_PTR0", RX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_rx_ring0));
-+ sysRegWrite(RX_MAX_CNT0, cpu_to_le32((u32) NUM_RX_DESC));
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_MAX_CNT0", RX_MAX_CNT0, cpu_to_le32((u32) NUM_RX_DESC));
-+ sysRegWrite(RX_CALC_IDX0, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_CALC_IDX0", RX_CALC_IDX0, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
-+ sysRegWrite(PDMA_RST_CFG, PST_DRX_IDX0);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "PDMA_RST_CFG", PDMA_RST_CFG, PST_DRX_IDX0);
-+
-+ set_fe_dma_glo_cfg();
-+
-+ return 1;
-+}
-+
-+inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no)
-+{
-+ unsigned int length=skb->len;
-+ END_DEVICE* ei_local = netdev_priv(dev);
-+ unsigned long tx_cpu_owner_idx0 = sysRegRead(TX_CTX_IDX0);
-+
-+ while(ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit == 0)
-+ {
-+ ei_local->stat.tx_errors++;
-+ }
-+
-+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info1.SDP0 = virt_to_phys(skb->data);
-+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.SDL0 = length;
-+ if (gmac_no == 1) {
-+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info4.FPORT = 1;
-+ }else {
-+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info4.FPORT = 2;
-+ }
-+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit = 0;
-+ tx_cpu_owner_idx0 = (tx_cpu_owner_idx0+1) % NUM_TX_DESC;
-+ while(ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit == 0)
-+ {
-+ ei_local->stat.tx_errors++;
-+ }
-+ sysRegWrite(TX_CTX_IDX0, cpu_to_le32((u32)tx_cpu_owner_idx0));
-+
-+ {
-+ ei_local->stat.tx_packets++;
-+ ei_local->stat.tx_bytes += length;
-+ }
-+
-+ return length;
-+}
-+
-+int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no)
-+{
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ unsigned long flags;
-+ unsigned long tx_cpu_owner_idx;
-+ unsigned int tx_cpu_owner_idx_next;
-+ unsigned int num_of_txd;
-+ unsigned int tx_cpu_owner_idx_next2;
-+
-+ dev->trans_start = jiffies; /* save the timestamp */
-+ spin_lock_irqsave(&ei_local->page_lock, flags);
-+ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+
-+ tx_cpu_owner_idx = sysRegRead(TX_CTX_IDX0);
-+ num_of_txd = 1;
-+ tx_cpu_owner_idx_next = (tx_cpu_owner_idx + num_of_txd) % NUM_TX_DESC;
-+
-+ if(((ei_local->skb_free[tx_cpu_owner_idx]) ==0) && (ei_local->skb_free[tx_cpu_owner_idx_next]==0)){
-+ rt2880_eth_send(dev, skb, gmac_no);
-+
-+ tx_cpu_owner_idx_next2 = (tx_cpu_owner_idx_next + 1) % NUM_TX_DESC;
-+
-+ if(ei_local->skb_free[tx_cpu_owner_idx_next2]!=0){
-+ }
-+ }else {
-+ ei_local->stat.tx_dropped++;
-+ kfree_skb(skb);
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return 0;
-+ }
-+
-+ ei_local->skb_free[tx_cpu_owner_idx] = skb;
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return 0;
-+}
-+
-+void ei_xmit_housekeeping(unsigned long unused)
-+{
-+ struct net_device *dev = dev_raether;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ struct PDMA_txdesc *tx_desc;
-+ unsigned long skb_free_idx;
-+ unsigned long tx_dtx_idx __maybe_unused;
-+ unsigned long reg_int_mask=0;
-+
-+ tx_dtx_idx = sysRegRead(TX_DTX_IDX0);
-+ tx_desc = ei_local->tx_ring0;
-+ skb_free_idx = ei_local->free_idx;
-+ if ((ei_local->skb_free[skb_free_idx]) != 0 && tx_desc[skb_free_idx].txd_info2.DDONE_bit==1) {
-+ while(tx_desc[skb_free_idx].txd_info2.DDONE_bit==1 && (ei_local->skb_free[skb_free_idx])!=0 ){
-+ dev_kfree_skb_any(ei_local->skb_free[skb_free_idx]);
-+ ei_local->skb_free[skb_free_idx]=0;
-+ skb_free_idx = (skb_free_idx +1) % NUM_TX_DESC;
-+ }
-+
-+ netif_wake_queue(dev);
-+ tx_ring_full=0;
-+ ei_local->free_idx = skb_free_idx;
-+ }
-+
-+ reg_int_mask=sysRegRead(FE_INT_ENABLE);
-+ sysRegWrite(FE_INT_ENABLE, reg_int_mask| TX_DLY_INT);
-+}
-+
-+EXPORT_SYMBOL(ei_start_xmit);
-+EXPORT_SYMBOL(ei_xmit_housekeeping);
-+EXPORT_SYMBOL(fe_dma_init);
-+EXPORT_SYMBOL(rt2880_eth_send);
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/raether_qdma.c
-@@ -0,0 +1,805 @@
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/if_vlan.h>
-+#include <linux/if_ether.h>
-+#include <linux/fs.h>
-+#include <asm/uaccess.h>
-+#include <asm/rt2880/surfboardint.h>
-+#if defined (CONFIG_RAETH_TSO)
-+#include <linux/tcp.h>
-+#include <net/ipv6.h>
-+#include <linux/ip.h>
-+#include <net/ip.h>
-+#include <net/tcp.h>
-+#include <linux/in.h>
-+#include <linux/ppp_defs.h>
-+#include <linux/if_pppox.h>
-+#endif
-+#include <linux/delay.h>
-+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,35)
-+#include <linux/sched.h>
-+#endif
-+
-+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0)
-+#include <asm/rt2880/rt_mmap.h>
-+#else
-+#include <linux/libata-compat.h>
-+#endif
-+
-+#include "ra2882ethreg.h"
-+#include "raether.h"
-+#include "ra_mac.h"
-+#include "ra_ioctl.h"
-+#include "ra_rfrw.h"
-+#ifdef CONFIG_RAETH_NETLINK
-+#include "ra_netlink.h"
-+#endif
-+#if defined (CONFIG_RAETH_QOS)
-+#include "ra_qos.h"
-+#endif
-+
-+#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE)
-+#include "../../../net/nat/hw_nat/ra_nat.h"
-+#endif
-+
-+#if defined (TASKLET_WORKQUEUE_SW)
-+int init_schedule;
-+int working_schedule;
-+#endif
-+
-+
-+#if !defined(CONFIG_RA_NAT_NONE)
-+/* bruce+
-+ */
-+extern int (*ra_sw_nat_hook_rx)(struct sk_buff *skb);
-+extern int (*ra_sw_nat_hook_tx)(struct sk_buff *skb, int gmac_no);
-+#endif
-+
-+#if defined(CONFIG_RA_CLASSIFIER)||defined(CONFIG_RA_CLASSIFIER_MODULE)
-+/* Qwert+
-+ */
-+#include <asm/mipsregs.h>
-+extern int (*ra_classifier_hook_tx)(struct sk_buff *skb, unsigned long cur_cycle);
-+extern int (*ra_classifier_hook_rx)(struct sk_buff *skb, unsigned long cur_cycle);
-+#endif /* CONFIG_RA_CLASSIFIER */
-+
-+#if defined (CONFIG_RALINK_RT3052_MP2)
-+int32_t mcast_rx(struct sk_buff * skb);
-+int32_t mcast_tx(struct sk_buff * skb);
-+#endif
-+
-+#ifdef RA_MTD_RW_BY_NUM
-+int ra_mtd_read(int num, loff_t from, size_t len, u_char *buf);
-+#else
-+int ra_mtd_read_nm(char *name, loff_t from, size_t len, u_char *buf);
-+#endif
-+
-+/* gmac driver feature set config */
-+#if defined (CONFIG_RAETH_NAPI) || defined (CONFIG_RAETH_QOS)
-+#undef DELAY_INT
-+#else
-+#define DELAY_INT 1
-+#endif
-+
-+//#define CONFIG_UNH_TEST
-+/* end of config */
-+
-+#if defined (CONFIG_RAETH_JUMBOFRAME)
-+#define MAX_RX_LENGTH 4096
-+#else
-+#define MAX_RX_LENGTH 1536
-+#endif
-+
-+extern struct net_device *dev_raether;
-+
-+#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
-+static int rx_dma_owner_idx1;
-+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
-+static int rx_calc_idx1;
-+#endif
-+#endif
-+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
-+static int rx_calc_idx0;
-+static unsigned long tx_cpu_owner_idx0=0;
-+#endif
-+static unsigned long tx_ring_full=0;
-+
-+#if defined (CONFIG_ETHTOOL) && defined (CONFIG_RAETH_ROUTER)
-+#include "ra_ethtool.h"
-+extern struct ethtool_ops ra_ethtool_ops;
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+extern struct ethtool_ops ra_virt_ethtool_ops;
-+#endif // CONFIG_PSEUDO_SUPPORT //
-+#endif // (CONFIG_ETHTOOL //
-+
-+#ifdef CONFIG_RALINK_VISTA_BASIC
-+int is_switch_175c = 1;
-+#endif
-+
-+//skb->mark to queue mapping table
-+extern unsigned int M2Q_table[64];
-+
-+
-+#define KSEG1 0xa0000000
-+#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1))
-+#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1)
-+
-+extern void set_fe_dma_glo_cfg(void);
-+
-+
-+/**
-+ *
-+ * @brief: get the TXD index from its address
-+ *
-+ * @param: cpu_ptr
-+ *
-+ * @return: TXD index
-+*/
-+
-+static unsigned int GET_TXD_OFFSET(struct QDMA_txdesc **cpu_ptr)
-+{
-+ struct net_device *dev = dev_raether;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ int ctx_offset;
-+ ctx_offset = (((((u32)*cpu_ptr) <<8)>>8) - ((((u32)ei_local->txd_pool)<<8)>>8))/ sizeof(struct QDMA_txdesc);
-+ ctx_offset = (*cpu_ptr - ei_local->txd_pool);
-+
-+ return ctx_offset;
-+}
-+
-+
-+
-+/**
-+ * @brief get free TXD from TXD queue
-+ *
-+ * @param free_txd
-+ *
-+ * @return
-+ */
-+static int get_free_txd(struct QDMA_txdesc **free_txd)
-+{
-+ struct net_device *dev = dev_raether;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ unsigned int tmp_idx;
-+
-+ if(ei_local->free_txd_num > 0){
-+ tmp_idx = ei_local->free_txd_head;
-+ ei_local->free_txd_head = ei_local->txd_pool_info[tmp_idx];
-+ ei_local->free_txd_num -= 1;
-+ *free_txd = &ei_local->txd_pool[tmp_idx];
-+ return tmp_idx;
-+ }else
-+ return NUM_TX_DESC;
-+}
-+
-+
-+/**
-+ * @brief add free TXD into TXD queue
-+ *
-+ * @param free_txd
-+ *
-+ * @return
-+ */
-+int put_free_txd(int free_txd_idx)
-+{
-+ struct net_device *dev = dev_raether;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ ei_local->txd_pool_info[ei_local->free_txd_tail] = free_txd_idx;
-+ ei_local->free_txd_tail = free_txd_idx;
-+ ei_local->txd_pool_info[free_txd_idx] = NUM_TX_DESC;
-+ ei_local->free_txd_num += 1;
-+ return 1;
-+}
-+
-+/*define qdma initial alloc*/
-+/**
-+ * @brief
-+ *
-+ * @param net_dev
-+ *
-+ * @return 0: fail
-+ * 1: success
-+ */
-+bool qdma_tx_desc_alloc(void)
-+{
-+ struct net_device *dev = dev_raether;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ struct QDMA_txdesc *free_txd = NULL;
-+ unsigned int txd_idx;
-+ int i = 0;
-+
-+
-+ ei_local->txd_pool = pci_alloc_consistent(NULL, sizeof(struct QDMA_txdesc) * NUM_TX_DESC, &ei_local->phy_txd_pool);
-+ printk("txd_pool=%p phy_txd_pool=%08X\n", ei_local->txd_pool , ei_local->phy_txd_pool);
-+
-+ if (ei_local->txd_pool == NULL) {
-+ printk("adapter->txd_pool allocation failed!\n");
-+ return 0;
-+ }
-+ printk("ei_local->skb_free start address is 0x%p.\n", ei_local->skb_free);
-+ //set all txd_pool_info to 0.
-+ for ( i = 0; i < NUM_TX_DESC; i++)
-+ {
-+ ei_local->skb_free[i]= 0;
-+ ei_local->txd_pool_info[i] = i + 1;
-+ ei_local->txd_pool[i].txd_info3.LS_bit = 1;
-+ ei_local->txd_pool[i].txd_info3.OWN_bit = 1;
-+ }
-+
-+ ei_local->free_txd_head = 0;
-+ ei_local->free_txd_tail = NUM_TX_DESC - 1;
-+ ei_local->free_txd_num = NUM_TX_DESC;
-+
-+
-+ //get free txd from txd pool
-+ txd_idx = get_free_txd(&free_txd);
-+ if( txd_idx == NUM_TX_DESC) {
-+ printk("get_free_txd fail\n");
-+ return 0;
-+ }
-+
-+ //add null TXD for transmit
-+ ei_local->tx_dma_ptr = VIRT_TO_PHYS(free_txd);
-+ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
-+ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr);
-+ sysRegWrite(QTX_DTX_PTR, ei_local->tx_dma_ptr);
-+
-+ //get free txd from txd pool
-+
-+ txd_idx = get_free_txd(&free_txd);
-+ if( txd_idx == NUM_TX_DESC) {
-+ printk("get_free_txd fail\n");
-+ return 0;
-+ }
-+ // add null TXD for release
-+ sysRegWrite(QTX_CRX_PTR, VIRT_TO_PHYS(free_txd));
-+ sysRegWrite(QTX_DRX_PTR, VIRT_TO_PHYS(free_txd));
-+
-+ printk("free_txd: %p, ei_local->cpu_ptr: %08X\n", free_txd, ei_local->tx_cpu_ptr);
-+
-+ printk(" POOL HEAD_PTR | DMA_PTR | CPU_PTR \n");
-+ printk("----------------+---------+--------\n");
-+#if 1
-+ printk(" 0x%p 0x%08X 0x%08X\n",ei_local->txd_pool,
-+ ei_local->tx_dma_ptr, ei_local->tx_cpu_ptr);
-+#endif
-+ return 1;
-+}
-+
-+bool fq_qdma_init(void)
-+{
-+ struct QDMA_txdesc *free_head = NULL;
-+ unsigned int free_head_phy;
-+ unsigned int free_tail_phy;
-+ unsigned int *free_page_head = NULL;
-+ unsigned int free_page_head_phy;
-+ int i;
-+
-+ free_head = pci_alloc_consistent(NULL, NUM_QDMA_PAGE * sizeof(struct QDMA_txdesc), &free_head_phy);
-+ if (unlikely(free_head == NULL)){
-+ printk(KERN_ERR "QDMA FQ decriptor not available...\n");
-+ return 0;
-+ }
-+ memset(free_head, 0x0, sizeof(struct QDMA_txdesc) * NUM_QDMA_PAGE);
-+
-+ free_page_head = pci_alloc_consistent(NULL, NUM_QDMA_PAGE * QDMA_PAGE_SIZE, &free_page_head_phy);
-+ if (unlikely(free_page_head == NULL)){
-+ printk(KERN_ERR "QDMA FQ pager not available...\n");
-+ return 0;
-+ }
-+ for (i=0; i < NUM_QDMA_PAGE; i++) {
-+ free_head[i].txd_info1.SDP = (free_page_head_phy + (i * QDMA_PAGE_SIZE));
-+ if(i < (NUM_QDMA_PAGE-1)){
-+ free_head[i].txd_info2.NDP = (free_head_phy + ((i+1) * sizeof(struct QDMA_txdesc)));
-+
-+
-+#if 0
-+ printk("free_head_phy[%d] is 0x%x!!!\n",i, VIRT_TO_PHYS(&free_head[i]) );
-+ printk("free_head[%d] is 0x%x!!!\n",i, &free_head[i] );
-+ printk("free_head[%d].txd_info1.SDP is 0x%x!!!\n",i, free_head[i].txd_info1.SDP );
-+ printk("free_head[%d].txd_info2.NDP is 0x%x!!!\n",i, free_head[i].txd_info2.NDP );
-+#endif
-+ }
-+ free_head[i].txd_info3.SDL = QDMA_PAGE_SIZE;
-+
-+ }
-+ free_tail_phy = (free_head_phy + (u32)((NUM_QDMA_PAGE-1) * sizeof(struct QDMA_txdesc)));
-+
-+ printk("free_head_phy is 0x%x!!!\n", free_head_phy);
-+ printk("free_tail_phy is 0x%x!!!\n", free_tail_phy);
-+ sysRegWrite(QDMA_FQ_HEAD, (u32)free_head_phy);
-+ sysRegWrite(QDMA_FQ_TAIL, (u32)free_tail_phy);
-+ sysRegWrite(QDMA_FQ_CNT, ((NUM_TX_DESC << 16) | NUM_QDMA_PAGE));
-+ sysRegWrite(QDMA_FQ_BLEN, QDMA_PAGE_SIZE << 16);
-+ return 1;
-+}
-+
-+int fe_dma_init(struct net_device *dev)
-+{
-+
-+ int i;
-+ unsigned int regVal;
-+ END_DEVICE* ei_local = netdev_priv(dev);
-+
-+ fq_qdma_init();
-+
-+ while(1)
-+ {
-+ regVal = sysRegRead(QDMA_GLO_CFG);
-+ if((regVal & RX_DMA_BUSY))
-+ {
-+ printk("\n RX_DMA_BUSY !!! ");
-+ continue;
-+ }
-+ if((regVal & TX_DMA_BUSY))
-+ {
-+ printk("\n TX_DMA_BUSY !!! ");
-+ continue;
-+ }
-+ break;
-+ }
-+ /*tx desc alloc, add a NULL TXD to HW*/
-+
-+ qdma_tx_desc_alloc();
-+
-+
-+ /* Initial RX Ring 0*/
-+#ifdef CONFIG_32B_DESC
-+ ei_local->rx_ring0 = kmalloc(NUM_RX_DESC * sizeof(struct PDMA_rxdesc), GFP_KERNEL);
-+ ei_local->phy_rx_ring0 = virt_to_phys(ei_local->rx_ring0);
-+#else
-+ ei_local->rx_ring0 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring0);
-+#endif
-+ for (i = 0; i < NUM_RX_DESC; i++) {
-+ memset(&ei_local->rx_ring0[i],0,sizeof(struct PDMA_rxdesc));
-+ ei_local->rx_ring0[i].rxd_info2.DDONE_bit = 0;
-+#if defined (CONFIG_RAETH_SCATTER_GATHER_RX_DMA)
-+ ei_local->rx_ring0[i].rxd_info2.LS0 = 0;
-+ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH;
-+#else
-+ ei_local->rx_ring0[i].rxd_info2.LS0 = 1;
-+#endif
-+ ei_local->rx_ring0[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx0_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
-+ }
-+ printk("\nphy_rx_ring0 = 0x%08x, rx_ring0 = 0x%p\n",ei_local->phy_rx_ring0,ei_local->rx_ring0);
-+
-+#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
-+ /* Initial RX Ring 1*/
-+#ifdef CONFIG_32B_DESC
-+ ei_local->rx_ring1 = kmalloc(NUM_RX_DESC * sizeof(struct PDMA_rxdesc), GFP_KERNEL);
-+ ei_local->phy_rx_ring1 = virt_to_phys(ei_local->rx_ring1);
-+#else
-+ ei_local->rx_ring1 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring1);
-+#endif
-+ for (i = 0; i < NUM_RX_DESC; i++) {
-+ memset(&ei_local->rx_ring1[i],0,sizeof(struct PDMA_rxdesc));
-+ ei_local->rx_ring1[i].rxd_info2.DDONE_bit = 0;
-+#if defined (CONFIG_RAETH_SCATTER_GATHER_RX_DMA)
-+ ei_local->rx_ring0[i].rxd_info2.LS0 = 0;
-+ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH;
-+#else
-+ ei_local->rx_ring1[i].rxd_info2.LS0 = 1;
-+#endif
-+ ei_local->rx_ring1[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx1_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
-+ }
-+ printk("\nphy_rx_ring1 = 0x%08x, rx_ring1 = 0x%p\n",ei_local->phy_rx_ring1,ei_local->rx_ring1);
-+#endif
-+
-+ regVal = sysRegRead(QDMA_GLO_CFG);
-+ regVal &= 0x000000FF;
-+ sysRegWrite(QDMA_GLO_CFG, regVal);
-+ regVal=sysRegRead(QDMA_GLO_CFG);
-+
-+ /* Tell the adapter where the TX/RX rings are located. */
-+
-+ sysRegWrite(QRX_BASE_PTR_0, phys_to_bus((u32) ei_local->phy_rx_ring0));
-+ sysRegWrite(QRX_MAX_CNT_0, cpu_to_le32((u32) NUM_RX_DESC));
-+ sysRegWrite(QRX_CRX_IDX_0, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
-+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
-+ rx_calc_idx0 = rx_dma_owner_idx0 = sysRegRead(QRX_CRX_IDX_0);
-+#endif
-+ sysRegWrite(QDMA_RST_CFG, PST_DRX_IDX0);
-+#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
-+ sysRegWrite(QRX_BASE_PTR_1, phys_to_bus((u32) ei_local->phy_rx_ring1));
-+ sysRegWrite(QRX_MAX_CNT_1, cpu_to_le32((u32) NUM_RX_DESC));
-+ sysRegWrite(QRX_CRX_IDX_1, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
-+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
-+ rx_calc_idx1 = rx_dma_owner_idx1 = sysRegRead(QRX_CRX_IDX_1);
-+#endif
-+ sysRegWrite(QDMA_RST_CFG, PST_DRX_IDX1);
-+#endif
-+
-+ set_fe_dma_glo_cfg();
-+
-+ return 1;
-+}
-+
-+inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no)
-+{
-+ unsigned int length=skb->len;
-+ END_DEVICE* ei_local = netdev_priv(dev);
-+
-+ struct QDMA_txdesc *cpu_ptr;
-+
-+ struct QDMA_txdesc *dma_ptr __maybe_unused;
-+ struct QDMA_txdesc *free_txd;
-+ int ctx_offset;
-+#if defined (CONFIG_RAETH_TSO)
-+ struct iphdr *iph = NULL;
-+ struct QDMA_txdesc *init_cpu_ptr;
-+ struct tcphdr *th = NULL;
-+ struct skb_frag_struct *frag;
-+ unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
-+ int i=0;
-+ int init_txd_idx;
-+#endif // CONFIG_RAETH_TSO //
-+
-+#if defined (CONFIG_RAETH_TSOV6)
-+ struct ipv6hdr *ip6h = NULL;
-+#endif
-+
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+ PSEUDO_ADAPTER *pAd;
-+#endif
-+ cpu_ptr = PHYS_TO_VIRT(ei_local->tx_cpu_ptr);
-+ dma_ptr = PHYS_TO_VIRT(ei_local->tx_dma_ptr);
-+ ctx_offset = GET_TXD_OFFSET(&cpu_ptr);
-+ ei_local->skb_free[ctx_offset] = skb;
-+#if defined (CONFIG_RAETH_TSO)
-+ init_cpu_ptr = cpu_ptr;
-+ init_txd_idx = ctx_offset;
-+#endif
-+
-+#if !defined (CONFIG_RAETH_TSO)
-+
-+ //2. prepare data
-+ cpu_ptr->txd_info1.SDP = VIRT_TO_PHYS(skb->data);
-+ cpu_ptr->txd_info3.SDL = skb->len;
-+
-+ if (gmac_no == 1) {
-+ cpu_ptr->txd_info4.FPORT = 1;
-+ }else {
-+ cpu_ptr->txd_info4.FPORT = 2;
-+ }
-+
-+
-+ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark];
-+#if 0
-+ iph = (struct iphdr *)skb_network_header(skb);
-+ if (iph->tos == 0xe0)
-+ cpu_ptr->txd_info3.QID = 3;
-+ else if (iph->tos == 0xa0)
-+ cpu_ptr->txd_info3.QID = 2;
-+ else if (iph->tos == 0x20)
-+ cpu_ptr->txd_info3.QID = 1;
-+ else
-+ cpu_ptr->txd_info3.QID = 0;
-+#endif
-+
-+#if defined (CONFIG_RAETH_CHECKSUM_OFFLOAD) && ! defined(CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628)
-+ if (skb->ip_summed == CHECKSUM_PARTIAL){
-+ cpu_ptr->txd_info4.TUI_CO = 7;
-+ }else {
-+ cpu_ptr->txd_info4.TUI_CO = 0;
-+ }
-+#endif
-+
-+#ifdef CONFIG_RAETH_HW_VLAN_TX
-+ if(vlan_tx_tag_present(skb)) {
-+ cpu_ptr->txd_info4.VLAN_TAG = 0x10000 | vlan_tx_tag_get(skb);
-+ }else {
-+ cpu_ptr->txd_info4.VLAN_TAG = 0;
-+ }
-+#endif
-+
-+#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE)
-+ if(FOE_MAGIC_TAG(skb) == FOE_MAGIC_PPE) {
-+ if(ra_sw_nat_hook_rx!= NULL){
-+ cpu_ptr->txd_info4.FPORT = 4; /* PPE */
-+ FOE_MAGIC_TAG(skb) = 0;
-+ }
-+ }
-+#endif
-+#if 0
-+ cpu_ptr->txd_info4.FPORT = 4; /* PPE */
-+ cpu_ptr->txd_info4.UDF = 0x2F;
-+#endif
-+
-+ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+ cpu_ptr->txd_info3.SWC_bit = 1;
-+
-+ //3. get NULL TXD and decrease free_tx_num by 1.
-+ ctx_offset = get_free_txd(&free_txd);
-+ if(ctx_offset == NUM_TX_DESC) {
-+ printk("get_free_txd fail\n"); // this should not happen. free_txd_num is 2 at least.
-+ return 0;
-+ }
-+
-+ //4. hook new TXD in the end of queue
-+ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd);
-+
-+
-+ //5. move CPU_PTR to new TXD
-+ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
-+ cpu_ptr->txd_info3.OWN_bit = 0;
-+ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr);
-+
-+#if 0
-+ printk("----------------------------------------------\n");
-+ printk("txd_info1:%08X \n",*(int *)&cpu_ptr->txd_info1);
-+ printk("txd_info2:%08X \n",*(int *)&cpu_ptr->txd_info2);
-+ printk("txd_info3:%08X \n",*(int *)&cpu_ptr->txd_info3);
-+ printk("txd_info4:%08X \n",*(int *)&cpu_ptr->txd_info4);
-+#endif
-+
-+#else //#if !defined (CONFIG_RAETH_TSO)
-+ cpu_ptr->txd_info1.SDP = VIRT_TO_PHYS(skb->data);
-+ cpu_ptr->txd_info3.SDL = (length - skb->data_len);
-+ cpu_ptr->txd_info3.LS_bit = nr_frags ? 0:1;
-+ if (gmac_no == 1) {
-+ cpu_ptr->txd_info4.FPORT = 1;
-+ }else {
-+ cpu_ptr->txd_info4.FPORT = 2;
-+ }
-+
-+ cpu_ptr->txd_info4.TSO = 0;
-+ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark];
-+#if defined (CONFIG_RAETH_CHECKSUM_OFFLOAD) && ! defined(CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628)
-+ if (skb->ip_summed == CHECKSUM_PARTIAL){
-+ cpu_ptr->txd_info4.TUI_CO = 7;
-+ }else {
-+ cpu_ptr->txd_info4.TUI_CO = 0;
-+ }
-+#endif
-+
-+#ifdef CONFIG_RAETH_HW_VLAN_TX
-+ if(vlan_tx_tag_present(skb)) {
-+ cpu_ptr->txd_info4.VLAN_TAG = 0x10000 | vlan_tx_tag_get(skb);
-+ }else {
-+ cpu_ptr->txd_info4.VLAN_TAG = 0;
-+ }
-+#endif
-+
-+#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE)
-+ if(FOE_MAGIC_TAG(skb) == FOE_MAGIC_PPE) {
-+ if(ra_sw_nat_hook_rx!= NULL){
-+ cpu_ptr->txd_info4.FPORT = 4; /* PPE */
-+ FOE_MAGIC_TAG(skb) = 0;
-+ }
-+ }
-+#endif
-+
-+ cpu_ptr->txd_info3.SWC_bit = 1;
-+
-+ ctx_offset = get_free_txd(&free_txd);
-+ if(ctx_offset == NUM_TX_DESC) {
-+ printk("get_free_txd fail\n");
-+ return 0;
-+ }
-+ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd);
-+ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
-+
-+ if(nr_frags > 0) {
-+ for(i=0;i<nr_frags;i++) {
-+ frag = &skb_shinfo(skb)->frags[i];
-+ cpu_ptr = free_txd;
-+ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark];
-+ cpu_ptr->txd_info1.SDP = pci_map_page(NULL, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE);
-+ cpu_ptr->txd_info3.SDL = frag->size;
-+ cpu_ptr->txd_info3.LS_bit = (i==nr_frags-1)?1:0;
-+ cpu_ptr->txd_info3.OWN_bit = 0;
-+ cpu_ptr->txd_info3.SWC_bit = 1;
-+ ei_local->skb_free[ctx_offset] = (i==nr_frags-1)?skb:(struct sk_buff *)0xFFFFFFFF; //MAGIC ID
-+
-+ ctx_offset = get_free_txd(&free_txd);
-+ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd);
-+ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
-+ }
-+ ei_local->skb_free[init_txd_idx]= (struct sk_buff *)0xFFFFFFFF; //MAGIC ID
-+ }
-+
-+ if(skb_shinfo(skb)->gso_segs > 1) {
-+
-+// TsoLenUpdate(skb->len);
-+
-+ /* TCP over IPv4 */
-+ iph = (struct iphdr *)skb_network_header(skb);
-+#if defined (CONFIG_RAETH_TSOV6)
-+ /* TCP over IPv6 */
-+ ip6h = (struct ipv6hdr *)skb_network_header(skb);
-+#endif
-+ if((iph->version == 4) && (iph->protocol == IPPROTO_TCP)) {
-+ th = (struct tcphdr *)skb_transport_header(skb);
-+
-+ init_cpu_ptr->txd_info4.TSO = 1;
-+
-+ th->check = htons(skb_shinfo(skb)->gso_size);
-+ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE);
-+ }
-+
-+#if defined (CONFIG_RAETH_TSOV6)
-+ /* TCP over IPv6 */
-+ //ip6h = (struct ipv6hdr *)skb_network_header(skb);
-+ else if ((ip6h->version == 6) && (ip6h->nexthdr == NEXTHDR_TCP)) {
-+ th = (struct tcphdr *)skb_transport_header(skb);
-+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
-+ init_cpu_ptr->txd_info4.TSO = 1;
-+#else
-+ init_cpu_ptr->txd_info4.TSO = 1;
-+#endif
-+ th->check = htons(skb_shinfo(skb)->gso_size);
-+ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE);
-+ }
-+#endif
-+ }
-+
-+
-+// dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+
-+ init_cpu_ptr->txd_info3.OWN_bit = 0;
-+#endif // CONFIG_RAETH_TSO //
-+
-+ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr);
-+
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+ if (gmac_no == 2) {
-+ if (ei_local->PseudoDev != NULL) {
-+ pAd = netdev_priv(ei_local->PseudoDev);
-+ pAd->stat.tx_packets++;
-+ pAd->stat.tx_bytes += length;
-+ }
-+ } else
-+
-+#endif
-+ {
-+ ei_local->stat.tx_packets++;
-+ ei_local->stat.tx_bytes += skb->len;
-+ }
-+ return length;
-+}
-+
-+int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no)
-+{
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ unsigned long flags;
-+ unsigned int num_of_txd;
-+#if defined (CONFIG_RAETH_TSO)
-+ unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
-+#endif
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+ PSEUDO_ADAPTER *pAd;
-+#endif
-+
-+#if !defined(CONFIG_RA_NAT_NONE)
-+ if(ra_sw_nat_hook_tx!= NULL)
-+ {
-+ spin_lock_irqsave(&ei_local->page_lock, flags);
-+ if(ra_sw_nat_hook_tx(skb, gmac_no)==1){
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ }else{
-+ kfree_skb(skb);
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return 0;
-+ }
-+ }
-+#endif
-+
-+
-+
-+ dev->trans_start = jiffies; /* save the timestamp */
-+ spin_lock_irqsave(&ei_local->page_lock, flags);
-+ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+
-+
-+//check free_txd_num before calling rt288_eth_send()
-+
-+#if defined (CONFIG_RAETH_TSO)
-+ num_of_txd = (nr_frags==0) ? 1 : (nr_frags + 1);
-+#else
-+ num_of_txd = 1;
-+#endif
-+
-+#if defined(CONFIG_RALINK_MT7621)
-+ if(sysRegRead(0xbe00000c)==0x00030101) {
-+ ei_xmit_housekeeping(0);
-+ }
-+#endif
-+
-+
-+ if ((ei_local->free_txd_num > num_of_txd + 1) && (ei_local->free_txd_num != NUM_TX_DESC))
-+ {
-+ rt2880_eth_send(dev, skb, gmac_no); // need to modify rt2880_eth_send() for QDMA
-+ if (ei_local->free_txd_num < 3)
-+ {
-+#if defined (CONFIG_RAETH_STOP_RX_WHEN_TX_FULL)
-+ netif_stop_queue(dev);
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+ netif_stop_queue(ei_local->PseudoDev);
-+#endif
-+ tx_ring_full = 1;
-+#endif
-+ }
-+ } else {
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+ if (gmac_no == 2)
-+ {
-+ if (ei_local->PseudoDev != NULL)
-+ {
-+ pAd = netdev_priv(ei_local->PseudoDev);
-+ pAd->stat.tx_dropped++;
-+ }
-+ } else
-+#endif
-+ ei_local->stat.tx_dropped++;
-+ kfree_skb(skb);
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return 0;
-+ }
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return 0;
-+}
-+
-+void ei_xmit_housekeeping(unsigned long unused)
-+{
-+ struct net_device *dev = dev_raether;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+#ifndef CONFIG_RAETH_NAPI
-+ unsigned long reg_int_mask=0;
-+#endif
-+ struct QDMA_txdesc *dma_ptr = NULL;
-+ struct QDMA_txdesc *cpu_ptr = NULL;
-+ struct QDMA_txdesc *tmp_ptr = NULL;
-+ unsigned int htx_offset = 0;
-+
-+ dma_ptr = PHYS_TO_VIRT(sysRegRead(QTX_DRX_PTR));
-+ cpu_ptr = PHYS_TO_VIRT(sysRegRead(QTX_CRX_PTR));
-+ if(cpu_ptr != dma_ptr && (cpu_ptr->txd_info3.OWN_bit == 1)) {
-+ while(cpu_ptr != dma_ptr && (cpu_ptr->txd_info3.OWN_bit == 1)) {
-+
-+ //1. keep cpu next TXD
-+ tmp_ptr = PHYS_TO_VIRT(cpu_ptr->txd_info2.NDP);
-+ htx_offset = GET_TXD_OFFSET(&tmp_ptr);
-+ //2. free skb meomry
-+#if defined (CONFIG_RAETH_TSO)
-+ if(ei_local->skb_free[htx_offset]!=(struct sk_buff *)0xFFFFFFFF) {
-+ dev_kfree_skb_any(ei_local->skb_free[htx_offset]);
-+ }
-+#else
-+ dev_kfree_skb_any(ei_local->skb_free[htx_offset]);
-+#endif
-+
-+ //3. release TXD
-+ htx_offset = GET_TXD_OFFSET(&cpu_ptr);
-+ put_free_txd(htx_offset);
-+
-+ netif_wake_queue(dev);
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+ netif_wake_queue(ei_local->PseudoDev);
-+#endif
-+ tx_ring_full=0;
-+
-+ //4. update cpu_ptr to next ptr
-+ cpu_ptr = tmp_ptr;
-+ }
-+ }
-+ sysRegWrite(QTX_CRX_PTR, VIRT_TO_PHYS(cpu_ptr));
-+#ifndef CONFIG_RAETH_NAPI
-+ reg_int_mask=sysRegRead(QFE_INT_ENABLE);
-+#if defined (DELAY_INT)
-+ sysRegWrite(FE_INT_ENABLE, reg_int_mask| RLS_DLY_INT);
-+#else
-+
-+ sysRegWrite(FE_INT_ENABLE, reg_int_mask | RLS_DONE_INT);
-+#endif
-+#endif //CONFIG_RAETH_NAPI//
-+}
-+
-+EXPORT_SYMBOL(ei_start_xmit);
-+EXPORT_SYMBOL(ei_xmit_housekeeping);
-+EXPORT_SYMBOL(fe_dma_init);
-+EXPORT_SYMBOL(rt2880_eth_send);
projects / openwrt.git / commitdiff