ralink: update patches

[openwrt.git] / target / linux / ramips / dts / WR6202.dts

diff --git a/target/linux/ramips/dts/WR6202.dts b/target/linux/ramips/dts/WR6202.dts
index 867880e..1e41756 100644 (file)
--- a/target/linux/ramips/dts/WR6202.dts
+++ b/target/linux/ramips/dts/WR6202.dts
@@ -6,12 +6,8 @@
        compatible = "WR6202", "ralink,rt3052-soc";
        model = "AWB WR6202";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
        chosen {
-               bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+               bootargs = "console=ttyS0,115200";
        };
 
        palmbus@10000000 {
@@ -64,6 +60,29 @@
                device-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x7b0000>;
+               };
        };
 
        ethernet@10100000 {
@@ -83,14 +102,14 @@
                status = "okay";
        };
 
-       gpio_export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
+       usb0: gpio-regulator {
+               compatible = "regulator-gpio";
 
-               usb {
-                       gpio-export,name = "usb";
-                       gpio-export,output = <0>;
-                       gpios = <&gpio0 11 0>;
-               };
+               regulator-name = "usb0-power";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-boot-on;
+
+               enable-gpio = <&gpio0 11 0>;
        };
 };