target/linux/xburst/patches-2.6.36/006-add-n516-board-support.patch

   1 From c8e520077c339cbc623aa629588865c7c3ff2937 Mon Sep 17 00:00:00 2001
   2 From: Lars-Peter Clausen <lars@metafoo.de>
   3 Date: Sat, 24 Apr 2010 17:25:01 +0200
   4 Subject: [PATCH] Add n516 board support
   5
   6 ---
   7  arch/mips/include/asm/mach-jz4740/board-n516.h |   39 +++
   8  arch/mips/jz4740/Kconfig                       |    3 +
   9  arch/mips/jz4740/Makefile                      |    1 +
  10  arch/mips/jz4740/board-n516-display.c          |  394 ++++++++++++++++++++++++
  11  arch/mips/jz4740/board-n516.c                  |  182 +++++++++++
  12  5 files changed, 619 insertions(+), 0 deletions(-)
  13  create mode 100644 arch/mips/include/asm/mach-jz4740/board-n516.h
  14  create mode 100644 arch/mips/jz4740/board-n516-display.c
  15  create mode 100644 arch/mips/jz4740/board-n516.c
  16
  17 --- /dev/null
  18 +++ b/arch/mips/include/asm/mach-jz4740/board-n516.h
  19 @@ -0,0 +1,39 @@
  20 +/*
  21 + *  linux/include/asm-mips/mach-jz4740/board-n516.h
  22 + *
  23 + *  JZ4730-based N516 board definition.
  24 + *
  25 + *  Copyright (C) 2009, Yauhen Kharuzhy <jekhor@gmail.com>
  26 + *
  27 + * This program is free software; you can redistribute it and/or modify
  28 + * it under the terms of the GNU General Public License as published by
  29 + * the Free Software Foundation; either version 2 of the License, or
  30 + * (at your option) any later version.
  31 + */
  32 +
  33 +#ifndef __ASM_JZ4740_N516_H__
  34 +#define __ASM_JZ4740_N516_H__
  35 +
  36 +#include <asm/mach-jz4740/gpio.h>
  37 +
  38 +/*
  39 + * GPIO
  40 + */
  41 +#define GPIO_SD_VCC_EN_N       JZ_GPIO_PORTD(17)
  42 +#define GPIO_SD_CD_N           JZ_GPIO_PORTD(7)
  43 +#define GPIO_SD_WP             JZ_GPIO_PORTD(15)
  44 +#define GPIO_USB_DETECT                JZ_GPIO_PORTD(19)
  45 +#define GPIO_CHARG_STAT_N      JZ_GPIO_PORTD(16)
  46 +#define GPIO_LED_ENABLE                JZ_GPIO_PORTD(28)
  47 +#define GPIO_LPC_INT           JZ_GPIO_PORTD(14)
  48 +#define GPIO_HPHONE_DETECT     JZ_GPIO_PORTD(20)
  49 +#define GPIO_SPEAKER_ENABLE    JZ_GPIO_PORTD(21)
  50 +
  51 +/* Display */
  52 +#define GPIO_DISPLAY_RST_L     JZ_GPIO_PORTB(18)
  53 +#define GPIO_DISPLAY_RDY       JZ_GPIO_PORTB(17)
  54 +#define GPIO_DISPLAY_STBY      JZ_GPIO_PORTC(22)
  55 +#define GPIO_DISPLAY_ERR       JZ_GPIO_PORTC(23)
  56 +#define GPIO_DISPLAY_OFF_N     JZ_GPIO_PORTD(1)
  57 +
  58 +#endif /* __ASM_JZ4740_N516_H__ */
  59 --- a/arch/mips/jz4740/Kconfig
  60 +++ b/arch/mips/jz4740/Kconfig
  61 @@ -6,6 +6,9 @@ choice
  62  config JZ4740_QI_LB60
  63         bool "Qi Hardware Ben NanoNote"
  64
  65 +config JZ4740_N516
  66 +       bool "Hanvon n516 eBook reader"
  67 +
  68  endchoice
  69
  70  config HAVE_PWM
  71 --- a/arch/mips/jz4740/Makefile
  72 +++ b/arch/mips/jz4740/Makefile
  73 @@ -12,6 +12,7 @@ obj-$(CONFIG_DEBUG_FS) += clock-debugfs.
  74  # board specific support
  75
  76  obj-$(CONFIG_JZ4740_QI_LB60)   += board-qi_lb60.o
  77 +obj-$(CONFIG_JZ4740_N516)      += board-n516.o board-n516-display.o
  78
  79  # PM support
  80
  81 --- /dev/null
  82 +++ b/arch/mips/jz4740/board-n516-display.c
  83 @@ -0,0 +1,394 @@
  84 +/*
  85 + * board-n516-display.c -- Platform device for N516 display
  86 + *
  87 + * Copyright (C) 2009, Yauhen Kharuzhy <jekhor@gmail.com>
  88 + *
  89 + * This file is subject to the terms and conditions of the GNU General Public
  90 + * License. See the file COPYING in the main directory of this archive for
  91 + * more details.
  92 + */
  93 +
  94 +#include <linux/module.h>
  95 +#include <linux/kernel.h>
  96 +#include <linux/errno.h>
  97 +#include <linux/string.h>
  98 +#include <linux/delay.h>
  99 +#include <linux/interrupt.h>
 100 +#include <linux/fb.h>
 101 +#include <linux/init.h>
 102 +#include <linux/platform_device.h>
 103 +#include <linux/irq.h>
 104 +#include <linux/gpio.h>
 105 +
 106 +#include <asm/mach-jz4740/jz4740_fb.h>
 107 +
 108 +#include <asm/mach-jz4740/platform.h>
 109 +#include <asm/mach-jz4740/board-n516.h>
 110 +
 111 +#include <video/metronomefb.h>
 112 +#include <linux/console.h>
 113 +
 114 +static struct fb_videomode n516_fb_modes[] = {
 115 +       [0] = {
 116 +               .name           = "Metronome 800x600",
 117 +               .refresh        = 50,
 118 +               .xres           = 400,
 119 +               .yres           = 624,
 120 +               .hsync_len      = 31,
 121 +               .vsync_len      = 23,
 122 +               .right_margin   = 31,
 123 +               .left_margin    = 5,
 124 +               .upper_margin   = 1,
 125 +               .lower_margin   = 2,
 126 +               .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 127 +       },
 128 +};
 129 +
 130 +static struct jz4740_fb_platform_data n516_fb_pdata = {
 131 +       .num_modes      = ARRAY_SIZE(n516_fb_modes),
 132 +       .modes          = n516_fb_modes,
 133 +       .bpp            = 16,
 134 +       .lcd_type       = JZ_LCD_TYPE_GENERIC_16_BIT,
 135 +};
 136 +
 137 +struct n516_board_info {
 138 +       uint8_t *metromem;
 139 +       size_t wfm_size;
 140 +       struct fb_info *host_fbinfo; /* the host LCD controller's fbi */
 141 +       unsigned int fw;
 142 +       unsigned int fh;
 143 +};
 144 +
 145 +static struct platform_device *n516_device;
 146 +static struct n516_board_info n516_board_info;
 147 +
 148 +static int metronome_gpios[] = {
 149 +       GPIO_DISPLAY_STBY,
 150 +       GPIO_DISPLAY_RST_L,
 151 +       GPIO_DISPLAY_RDY,
 152 +       GPIO_DISPLAY_ERR,
 153 +/*     GPIO_DISPLAY_OFF_N,*/
 154 +};
 155 +
 156 +static const char *metronome_gpio_names[] = {
 157 +       "Metronome STDBY",
 158 +       "Metronome RST",
 159 +       "Metronome RDY",
 160 +       "Metronome ERR",
 161 +/*     "Metronone OFF",*/
 162 +};
 163 +
 164 +static int n516_enable_hostfb(bool enable)
 165 +{
 166 +       int ret;
 167 +       int blank = enable ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
 168 +
 169 +       acquire_console_sem();
 170 +       ret = fb_blank(n516_board_info.host_fbinfo, blank);
 171 +       release_console_sem();
 172 +
 173 +       return ret;
 174 +}
 175 +
 176 +static int n516_init_metronome_gpios(struct metronomefb_par *par)
 177 +{
 178 +       int i;
 179 +       int ret;
 180 +
 181 +       for (i = 0; i < ARRAY_SIZE(metronome_gpios); ++i) {
 182 +               ret = gpio_request(metronome_gpios[i], metronome_gpio_names[i]);
 183 +               if (ret)
 184 +                       goto err;
 185 +       }
 186 +
 187 +       gpio_direction_output(GPIO_DISPLAY_OFF_N, 0);
 188 +       gpio_direction_output(GPIO_DISPLAY_RST_L, 0);
 189 +       gpio_direction_output(GPIO_DISPLAY_STBY, 0);
 190 +       gpio_direction_input(GPIO_DISPLAY_RDY);
 191 +       gpio_direction_input(GPIO_DISPLAY_ERR);
 192 +
 193 +       return 0;
 194 +err:
 195 +       for (--i; i >= 0; --i)
 196 +               gpio_free(metronome_gpios[i]);
 197 +
 198 +       return ret;
 199 +}
 200 +
 201 +static int n516_share_video_mem(struct fb_info *info)
 202 +{
 203 +       int ret;
 204 +
 205 +       dev_dbg(&n516_device->dev, "ENTER %s\n", __func__);
 206 +       dev_dbg(&n516_device->dev, "%s, info->var.xres = %u, info->var.yres = %u\n", __func__, info->var.xres, info->var.yres);
 207 +       /* rough check if this is our desired fb and not something else */
 208 +       if ((info->var.xres != n516_fb_pdata.modes[0].xres)
 209 +               || (info->var.yres != n516_fb_pdata.modes[0].yres))
 210 +               return 0;
 211 +
 212 +       /* we've now been notified that we have our new fb */
 213 +       n516_board_info.metromem = info->screen_base;
 214 +       n516_board_info.host_fbinfo = info;
 215 +
 216 +       n516_enable_hostfb(false);
 217 +       /* try to refcount host drv since we are the consumer after this */
 218 +       if (!try_module_get(info->fbops->owner))
 219 +               return -ENODEV;
 220 +
 221 +       /* this _add binds metronomefb to n516. metronomefb refcounts n516 */
 222 +       ret = platform_device_add(n516_device);
 223 +
 224 +       if (ret) {
 225 +               platform_device_put(n516_device);
 226 +               return ret;
 227 +       }
 228 +
 229 +       /* request our platform independent driver */
 230 +       request_module("metronomefb");
 231 +
 232 +       return 0;
 233 +}
 234 +
 235 +static int n516_unshare_video_mem(struct fb_info *info)
 236 +{
 237 +       dev_dbg(&n516_device->dev, "ENTER %s\n", __func__);
 238 +
 239 +       if (info != n516_board_info.host_fbinfo)
 240 +               return 0;
 241 +
 242 +       module_put(n516_board_info.host_fbinfo->fbops->owner);
 243 +       return 0;
 244 +}
 245 +
 246 +static int n516_fb_notifier_callback(struct notifier_block *self,
 247 +                                unsigned long event, void *data)
 248 +{
 249 +       struct fb_event *evdata = data;
 250 +       struct fb_info *info = evdata->info;
 251 +
 252 +       dev_dbg(&n516_device->dev, "ENTER %s\n", __func__);
 253 +
 254 +       if (event == FB_EVENT_FB_REGISTERED)
 255 +               return n516_share_video_mem(info);
 256 +       else if (event == FB_EVENT_FB_UNREGISTERED)
 257 +               return n516_unshare_video_mem(info);
 258 +
 259 +       return 0;
 260 +}
 261 +
 262 +static struct notifier_block n516_fb_notif = {
 263 +       .notifier_call = n516_fb_notifier_callback,
 264 +};
 265 +
 266 +/* this gets called as part of our init. these steps must be done now so
 267 + * that we can use set_pxa_fb_info */
 268 +static void __init n516_presetup_fb(void)
 269 +{
 270 +       int padding_size;
 271 +       int totalsize;
 272 +
 273 +       /* the frame buffer is divided as follows:
 274 +       command | CRC | padding
 275 +       16kb waveform data | CRC | padding
 276 +       image data | CRC
 277 +       */
 278 +
 279 +       n516_board_info.fw = 800;
 280 +       n516_board_info.fh = 624;
 281 +
 282 +       /* waveform must be 16k + 2 for checksum */
 283 +       n516_board_info.wfm_size = roundup(16*1024 + 2, n516_board_info.fw);
 284 +
 285 +       padding_size = PAGE_SIZE + (4 * n516_board_info.fw);
 286 +
 287 +       /* total is 1 cmd , 1 wfm, padding and image */
 288 +       totalsize = n516_board_info.fw + n516_board_info.wfm_size;
 289 +       totalsize += padding_size + (n516_board_info.fw*n516_board_info.fh);
 290 +
 291 +       /* save this off because we're manipulating fw after this and
 292 +        * we'll need it when we're ready to setup the framebuffer */
 293 +
 294 +       /* the reason we do this adjustment is because we want to acquire
 295 +        * more framebuffer memory without imposing custom awareness on the
 296 +        * underlying driver */
 297 +       n516_fb_pdata.modes[0].yres = DIV_ROUND_UP(totalsize, n516_board_info.fw);
 298 +
 299 +       jz4740_framebuffer_device.dev.platform_data = &n516_fb_pdata;
 300 +       platform_device_register(&jz4740_framebuffer_device);
 301 +}
 302 +
 303 +/* this gets called by metronomefb as part of its init, in our case, we
 304 + * have already completed initial framebuffer init in presetup_fb so we
 305 + * can just setup the fb access pointers */
 306 +static int n516_setup_fb(struct metronomefb_par *par)
 307 +{
 308 +       /* metromem was set up by the notifier in share_video_mem so now
 309 +        * we can use its value to calculate the other entries */
 310 +       par->metromem_cmd = (struct metromem_cmd *) n516_board_info.metromem;
 311 +       par->metromem_wfm = n516_board_info.metromem + n516_board_info.fw;
 312 +       par->metromem_img = par->metromem_wfm + n516_board_info.wfm_size;
 313 +       par->metromem_img_csum = (u16 *) (par->metromem_img + (n516_board_info.fw * n516_board_info.fh));
 314 +       par->metromem_dma = n516_board_info.host_fbinfo->fix.smem_start;
 315 +
 316 +       return 0;
 317 +}
 318 +
 319 +static int n516_get_panel_type(void)
 320 +{
 321 +       return 5;
 322 +}
 323 +
 324 +static irqreturn_t n516_handle_irq(int irq, void *dev_id)
 325 +{
 326 +       struct metronomefb_par *par = dev_id;
 327 +
 328 +       dev_dbg(&par->pdev->dev, "Metronome IRQ! RDY=%d\n",     gpio_get_value(GPIO_DISPLAY_RDY));
 329 +       wake_up_all(&par->waitq);
 330 +
 331 +       return IRQ_HANDLED;
 332 +}
 333 +
 334 +static void n516_power_ctl(struct metronomefb_par *par, int cmd)
 335 +{
 336 +       switch (cmd) {
 337 +       case METRONOME_POWER_OFF:
 338 +               gpio_set_value(GPIO_DISPLAY_OFF_N, 1);
 339 +               n516_enable_hostfb(false);
 340 +               break;
 341 +       case METRONOME_POWER_ON:
 342 +               gpio_set_value(GPIO_DISPLAY_OFF_N, 0);
 343 +               n516_enable_hostfb(true);
 344 +               break;
 345 +       }
 346 +}
 347 +
 348 +static int n516_get_rdy(struct metronomefb_par *par)
 349 +{
 350 +       return gpio_get_value(GPIO_DISPLAY_RDY);
 351 +}
 352 +
 353 +static int n516_get_err(struct metronomefb_par *par)
 354 +{
 355 +       return gpio_get_value(GPIO_DISPLAY_ERR);
 356 +}
 357 +
 358 +static int n516_setup_irq(struct fb_info *info)
 359 +{
 360 +       int ret;
 361 +
 362 +       dev_dbg(&n516_device->dev, "ENTER %s\n", __func__);
 363 +
 364 +       ret = request_irq(gpio_to_irq(GPIO_DISPLAY_RDY), n516_handle_irq,
 365 +                               IRQF_TRIGGER_RISING,
 366 +                               "n516", info->par);
 367 +       if (ret)
 368 +               dev_err(&n516_device->dev, "request_irq failed: %d\n", ret);
 369 +
 370 +       return ret;
 371 +}
 372 +
 373 +static void n516_set_rst(struct metronomefb_par *par, int state)
 374 +{
 375 +       dev_dbg(&n516_device->dev, "ENTER %s, RDY=%d\n", __func__, gpio_get_value(GPIO_DISPLAY_RDY));
 376 +       if (state)
 377 +               gpio_set_value(GPIO_DISPLAY_RST_L, 1);
 378 +       else
 379 +               gpio_set_value(GPIO_DISPLAY_RST_L, 0);
 380 +}
 381 +
 382 +static void n516_set_stdby(struct metronomefb_par *par, int state)
 383 +{
 384 +       dev_dbg(&n516_device->dev, "ENTER %s, RDY=%d\n", __func__, gpio_get_value(GPIO_DISPLAY_RDY));
 385 +       if (state)
 386 +               gpio_set_value(GPIO_DISPLAY_STBY, 1);
 387 +       else
 388 +               gpio_set_value(GPIO_DISPLAY_STBY, 0);
 389 +}
 390 +
 391 +static int n516_wait_event(struct metronomefb_par *par)
 392 +{
 393 +       unsigned long timeout = jiffies + HZ / 20;
 394 +
 395 +       dev_dbg(&n516_device->dev, "ENTER1 %s, RDY=%d\n",
 396 +                       __func__, gpio_get_value(GPIO_DISPLAY_RDY));
 397 +       while (n516_get_rdy(par) && time_before(jiffies, timeout))
 398 +               schedule();
 399 +
 400 +       dev_dbg(&n516_device->dev, "ENTER2 %s, RDY=%d\n",
 401 +                       __func__, gpio_get_value(GPIO_DISPLAY_RDY));
 402 +       return wait_event_timeout(par->waitq,
 403 +                       n516_get_rdy(par), HZ * 2) ? 0 : -EIO;
 404 +}
 405 +
 406 +static int n516_wait_event_intr(struct metronomefb_par *par)
 407 +{
 408 +       unsigned long timeout = jiffies + HZ/20;
 409 +
 410 +       dev_dbg(&n516_device->dev, "ENTER1 %s, RDY=%d\n",
 411 +                       __func__, gpio_get_value(GPIO_DISPLAY_RDY));
 412 +       while (n516_get_rdy(par) && time_before(jiffies, timeout))
 413 +               schedule();
 414 +
 415 +       dev_dbg(&n516_device->dev, "ENTER2 %s, RDY=%d\n",
 416 +                       __func__, gpio_get_value(GPIO_DISPLAY_RDY));
 417 +       return wait_event_interruptible_timeout(par->waitq,
 418 +                                       n516_get_rdy(par), HZ * 2) ? 0 : -EIO;
 419 +}
 420 +
 421 +static void n516_cleanup(struct metronomefb_par *par)
 422 +{
 423 +       int i;
 424 +
 425 +       free_irq(gpio_to_irq(GPIO_DISPLAY_RDY), par);
 426 +       for (i = 0; i < ARRAY_SIZE(metronome_gpios); ++i)
 427 +               gpio_free(metronome_gpios[i]);
 428 +}
 429 +
 430 +static struct metronome_board n516_board __initdata = {
 431 +       .owner                  = THIS_MODULE,
 432 +       .power_ctl              = n516_power_ctl,
 433 +       .setup_irq              = n516_setup_irq,
 434 +       .setup_io               = n516_init_metronome_gpios,
 435 +       .setup_fb               = n516_setup_fb,
 436 +       .set_rst                = n516_set_rst,
 437 +       .get_err                = n516_get_err,
 438 +       .get_rdy                = n516_get_rdy,
 439 +       .set_stdby              = n516_set_stdby,
 440 +       .met_wait_event         = n516_wait_event,
 441 +       .met_wait_event_intr    = n516_wait_event_intr,
 442 +       .get_panel_type         = n516_get_panel_type,
 443 +       .cleanup                = n516_cleanup,
 444 +};
 445 +
 446 +static int __init n516_init(void)
 447 +{
 448 +       int ret;
 449 +
 450 +       /* Keep the metronome off, until its driver is loaded */
 451 +       ret = gpio_request(GPIO_DISPLAY_OFF_N, "Display off");
 452 +       if (ret)
 453 +               return ret;
 454 +
 455 +       gpio_direction_output(GPIO_DISPLAY_OFF_N, 1);
 456 +
 457 +       /* before anything else, we request notification for any fb
 458 +        * creation events */
 459 +       fb_register_client(&n516_fb_notif);
 460 +
 461 +       n516_device = platform_device_alloc("metronomefb", -1);
 462 +       if (!n516_device)
 463 +               return -ENOMEM;
 464 +
 465 +       /* the n516_board that will be seen by metronomefb is a copy */
 466 +       platform_device_add_data(n516_device, &n516_board,
 467 +                                       sizeof(n516_board));
 468 +
 469 +       n516_presetup_fb();
 470 +
 471 +       return 0;
 472 +}
 473 +module_init(n516_init);
 474 +
 475 +MODULE_DESCRIPTION("board driver for n516 display");
 476 +MODULE_AUTHOR("Yauhen Kharuzhy");
 477 +MODULE_LICENSE("GPL");
 478 --- /dev/null
 479 +++ b/arch/mips/jz4740/board-n516.c
 480 @@ -0,0 +1,182 @@
 481 +/*
 482 + * linux/arch/mips/jz4740/board-516.c
 483 + *
 484 + * JZ4740 n516 board setup routines.
 485 + *
 486 + * Copyright (c) 2009, Yauhen Kharuzhy <jekhor@gmail.com>
 487 + *
 488 + * This program is free software; you can redistribute it and/or modify
 489 + * it under the terms of the GNU General Public License as published by
 490 + * the Free Software Foundation; either version 2 of the License, or
 491 + * (at your option) any later version.
 492 + */
 493 +
 494 +#include <linux/init.h>
 495 +#include <linux/sched.h>
 496 +#include <linux/ioport.h>
 497 +#include <linux/mm.h>
 498 +#include <linux/console.h>
 499 +#include <linux/delay.h>
 500 +#include <linux/i2c.h>
 501 +#include <linux/platform_device.h>
 502 +#include <linux/mtd/mtd.h>
 503 +#include <linux/leds.h>
 504 +
 505 +#include <linux/power_supply.h>
 506 +#include <linux/power/gpio-charger.h>
 507 +
 508 +#include <linux/i2c.h>
 509 +
 510 +#include <asm/mach-jz4740/jz4740_mmc.h>
 511 +#include <asm/mach-jz4740/jz4740_nand.h>
 512 +
 513 +#include <asm/mach-jz4740/board-n516.h>
 514 +#include <asm/mach-jz4740/platform.h>
 515 +
 516 +#include "clock.h"
 517 +
 518 +static long n516_panic_blink(int state)
 519 +{
 520 +       gpio_set_value(GPIO_LED_ENABLE, state ? 1 : 0);
 521 +       return 0;
 522 +}
 523 +
 524 +static void __init board_gpio_setup(void)
 525 +{
 526 +/*     jz_gpio_enable_pullup(JZ_GPIO_PORTD(23));
 527 +       jz_gpio_enable_pullup(JZ_GPIO_PORTD(24));*/
 528 +}
 529 +
 530 +static const struct i2c_board_info n516_i2c_board_info[] = {
 531 +       {
 532 +               .type           = "LPC524",
 533 +               .addr           = 0x54,
 534 +       },
 535 +       {
 536 +               .type           = "lm75a",
 537 +               .addr           = 0x48,
 538 +       }
 539 +};
 540 +
 541 +static struct jz4740_mmc_platform_data n516_mmc_pdata = {
 542 +       .gpio_card_detect       = GPIO_SD_CD_N,
 543 +       .card_detect_active_low = 1,
 544 +       .gpio_read_only         = -1,
 545 +       .gpio_power             = GPIO_SD_VCC_EN_N,
 546 +       .power_active_low = 1,
 547 +};
 548 +
 549 +static struct gpio_led n516_leds[] = {
 550 +       {
 551 +               .name = "n516:blue:power",
 552 +               .gpio = GPIO_LED_ENABLE,
 553 +               .default_state = LEDS_GPIO_DEFSTATE_ON,
 554 +               .default_trigger = "nand-disk",
 555 +       }
 556 +};
 557 +
 558 +static struct gpio_led_platform_data n516_leds_pdata = {
 559 +       .leds = n516_leds,
 560 +       .num_leds = ARRAY_SIZE(n516_leds),
 561 +};
 562 +
 563 +static struct platform_device n516_leds_device = {
 564 +       .name = "leds-gpio",
 565 +       .id = -1,
 566 +       .dev = {
 567 +               .platform_data = &n516_leds_pdata,
 568 +       },
 569 +};
 570 +
 571 +static struct mtd_partition n516_partitions[] = {
 572 +       { .name = "NAND BOOT partition",
 573 +         .offset = 0 * 0x100000,
 574 +         .size = 4 * 0x100000,
 575 +       },
 576 +       { .name = "NAND KERNEL partition",
 577 +         .offset = 4 * 0x100000,
 578 +         .size = 4 * 0x100000,
 579 +       },
 580 +       { .name = "NAND ROOTFS partition",
 581 +         .offset = 8 * 0x100000,
 582 +         .size = 504 * 0x100000,
 583 +       },
 584 +};
 585 +
 586 +static struct nand_ecclayout n516_ecclayout = {
 587 +/*     .eccbytes = 36,
 588 +       .eccpos = {
 589 +                6,  7,  8,  9, 10, 11, 12, 13, 14,
 590 +               15, 16, 17, 18, 19, 20, 21, 22, 23,
 591 +               24, 25, 26, 27, 28, 29, 30, 31, 32,
 592 +               33, 34, 35, 36, 37, 38, 39, 40, 41,
 593 +       },*/
 594 +       .oobfree = {
 595 +               {
 596 +                       .offset = 2,
 597 +                       .length = 4
 598 +               },
 599 +               {
 600 +                       .offset = 42,
 601 +                       .length = 22,
 602 +               }
 603 +       }
 604 +};
 605 +
 606 +static struct jz_nand_platform_data n516_nand_pdata = {
 607 +       .ecc_layout = &n516_ecclayout,
 608 +       .partitions = n516_partitions,
 609 +       .num_partitions = ARRAY_SIZE(n516_partitions),
 610 +       .busy_gpio = 94,
 611 +};
 612 +
 613 +static char *n516_batteries[] = {
 614 +       "n516_battery",
 615 +};
 616 +
 617 +static struct gpio_charger_platform_data n516_charger_pdata = {
 618 +       .name = "usb",
 619 +       .type = POWER_SUPPLY_TYPE_USB,
 620 +       .gpio = GPIO_USB_DETECT,
 621 +       .gpio_active_low = 1,
 622 +       .batteries = n516_batteries,
 623 +       .num_batteries = ARRAY_SIZE(n516_batteries),
 624 +};
 625 +
 626 +static struct platform_device n516_charger_device = {
 627 +       .name = "gpio-charger",
 628 +       .dev = {
 629 +               .platform_data = &n516_charger_pdata,
 630 +       },
 631 +};
 632 +
 633 +static struct platform_device *n516_devices[] __initdata = {
 634 +       &jz4740_nand_device,
 635 +       &n516_leds_device,
 636 +       &jz4740_mmc_device,
 637 +       &jz4740_i2s_device,
 638 +       &jz4740_codec_device,
 639 +       &jz4740_rtc_device,
 640 +       &jz4740_udc_device,
 641 +       &jz4740_i2c_device,
 642 +       &n516_charger_device,
 643 +};
 644 +
 645 +struct jz4740_clock_board_data jz4740_clock_bdata = {
 646 +       .ext_rate = 12000000,
 647 +       .rtc_rate = 32768,
 648 +};
 649 +
 650 +static int n516_setup_platform(void)
 651 +{
 652 +       jz4740_serial_device_register();
 653 +       board_gpio_setup();
 654 +
 655 +       panic_blink = n516_panic_blink;
 656 +       i2c_register_board_info(0, n516_i2c_board_info, ARRAY_SIZE(n516_i2c_board_info));
 657 +       jz4740_mmc_device.dev.platform_data = &n516_mmc_pdata;
 658 +       jz4740_nand_device.dev.platform_data = &n516_nand_pdata;
 659 +
 660 +       return platform_add_devices(n516_devices, ARRAY_SIZE(n516_devices));
 661 +}
 662 +arch_initcall(n516_setup_platform);