target/linux/sunxi/patches-3.18/301-add-bananapro.diff

   1 diff -ruN old/arch/arm/boot/dts/Makefile new/arch/arm/boot/dts/Makefile
   2 --- old/arch/arm/boot/dts/Makefile      2015-01-06 09:29:23.612462619 +0100
   3 +++ new/arch/arm/boot/dts/Makefile      2015-01-06 09:29:36.316254352 +0100
   4 @@ -436,6 +436,7 @@
   5         sun6i-a31-m9.dtb
   6  dtb-$(CONFIG_MACH_SUN7I) += \
   7         sun7i-a20-bananapi.dtb \
   8 +       sun7i-a20-bananapro.dtb \
   9         sun7i-a20-cubieboard2.dtb \
  10         sun7i-a20-cubietruck.dtb \
  11         sun7i-a20-hummingbird.dtb \
  12 diff -ruN old/arch/arm/boot/dts/sun7i-a20-bananapro.dts new/arch/arm/boot/dts/sun7i-a20-bananapro.dts
  13 --- old/arch/arm/boot/dts/sun7i-a20-bananapro.dts       1970-01-01 01:00:00.000000000 +0100
  14 +++ new/arch/arm/boot/dts/sun7i-a20-bananapro.dts       2015-01-06 09:31:18.290582574 +0100
  15 @@ -0,0 +1,232 @@
  16 +/*
  17 + * Copyright 2014 Zoltan HERPAI <wigyori@uid0.hu>
  18 + *
  19 + * This file is dual-licensed: you can use it either under the terms
  20 + * of the GPL or the X11 license, at your option. Note that this dual
  21 + * licensing only applies to this file, and not this project as a
  22 + * whole.
  23 + *
  24 + *  a) This library is free software; you can redistribute it and/or
  25 + *     modify it under the terms of the GNU General Public License as
  26 + *     published by the Free Software Foundation; either version 2 of the
  27 + *     License, or (at your option) any later version.
  28 + *
  29 + *     This library is distributed in the hope that it will be useful,
  30 + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  31 + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  32 + *     GNU General Public License for more details.
  33 + *
  34 + *     You should have received a copy of the GNU General Public
  35 + *     License along with this library; if not, write to the Free
  36 + *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  37 + *     MA 02110-1301 USA
  38 + *
  39 + * Or, alternatively,
  40 + *
  41 + *  b) Permission is hereby granted, free of charge, to any person
  42 + *     obtaining a copy of this software and associated documentation
  43 + *     files (the "Software"), to deal in the Software without
  44 + *     restriction, including without limitation the rights to use,
  45 + *     copy, modify, merge, publish, distribute, sublicense, and/or
  46 + *     sell copies of the Software, and to permit persons to whom the
  47 + *     Software is furnished to do so, subject to the following
  48 + *     conditions:
  49 + *
  50 + *     The above copyright notice and this permission notice shall be
  51 + *     included in all copies or substantial portions of the Software.
  52 + *
  53 + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  54 + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  55 + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  56 + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  57 + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  58 + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  59 + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  60 + *     OTHER DEALINGS IN THE SOFTWARE.
  61 + */
  62 +
  63 +/dts-v1/;
  64 +/include/ "sun7i-a20.dtsi"
  65 +/include/ "sunxi-common-regulators.dtsi"
  66 +
  67 +/ {
  68 +       model = "LeMaker Banana Pro";
  69 +       compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
  70 +
  71 +       soc@01c00000 {
  72 +               spi0: spi@01c05000 {
  73 +                       pinctrl-names = "default";
  74 +                       pinctrl-0 = <&spi0_pins_a>;
  75 +                       status = "okay";
  76 +               };
  77 +
  78 +               mmc0: mmc@01c0f000 {
  79 +                       pinctrl-names = "default";
  80 +                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
  81 +                       vmmc-supply = <&reg_vcc3v3>;
  82 +                       bus-width = <4>;
  83 +                       cd-gpios = <&pio 7 10 0>; /* PH10 */
  84 +                       cd-inverted;
  85 +                       status = "okay";
  86 +               };
  87 +
  88 +               mmc3: mmc@01c12000 {
  89 +                       #address-cells = <1>;
  90 +                       #size-cells = <0>;
  91 +
  92 +                       pinctrl-names = "default";
  93 +                       pinctrl-0 = <&mmc3_pins_a>
  94 +                       vmmc-supply = <&reg_vmmc3>;
  95 +                       bus-width = <4>;
  96 +                       non-removable;
  97 +                       status = "okay";
  98 +
  99 +                       brcmf: bcrmf@1 {
 100 +                               reg = <1>;
 101 +                               ccompatible = "brcm,bcm4329-fmac";
 102 +                               interrupt-parent = <&pio>;
 103 +                               interrupts = <10 8>; /* PH10 / EINT10 * taken from https://github.com/Bananian/fex/blob/master/BananaPro/BananaPro.fex.otg-off */
 104 +                               interrupt-names = "host-wake";
 105 +                       };
 106 +               };
 107 +
 108 +               usbphy: phy@01c13400 {
 109 +                       usb1_vbus-supply = <&reg_usb1_vbus>;
 110 +                       usb2_vbus-supply = <&reg_usb2_vbus>;
 111 +                       status = "okay";
 112 +               };
 113 +
 114 +               ehci0: usb@01c14000 {
 115 +                       status = "okay";
 116 +               };
 117 +
 118 +               ohci0: usb@01c14400 {
 119 +                       status = "okay";
 120 +               };
 121 +
 122 +               ahci: sata@01c18000 {
 123 +                       status = "okay";
 124 +               };
 125 +
 126 +               ehci1: usb@01c1c000 {
 127 +                       status = "okay";
 128 +               };
 129 +
 130 +               ohci1: usb@01c1c400 {
 131 +                       status = "okay";
 132 +               };
 133 +
 134 +               pinctrl@01c20800 {
 135 +                       mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
 136 +                               allwinner,pins = "PH10";
 137 +                               allwinner,function = "gpio_in";
 138 +                               allwinner,drive = <0>;
 139 +                               allwinner,pull = <1>;
 140 +                       };
 141 +
 142 +                       gmac_power_pin_bananapro: gmac_power_pin@0 {
 143 +                               allwinner,pins = "PH23";
 144 +                               allwinner,function = "gpio_out";
 145 +                               allwinner,drive = <0>;
 146 +                               allwinner,pull = <0>;
 147 +                       };
 148 +
 149 +                       led_pins_bananapro: led_pins@0 {
 150 +                               allwinner,pins = "PH24";
 151 +                               allwinner,function = "gpio_out";
 152 +                               allwinner,drive = <0>;
 153 +                               allwinner,pull = <0>;
 154 +                       };
 155 +               };
 156 +
 157 +               ir0: ir@01c21800 {
 158 +                       pinctrl-names = "default";
 159 +                       pinctrl-0 = <&ir0_pins_a>;
 160 +                       status = "okay";
 161 +               };
 162 +
 163 +               uart0: serial@01c28000 {
 164 +                       pinctrl-names = "default";
 165 +                       pinctrl-0 = <&uart0_pins_a>;
 166 +                       status = "okay";
 167 +               };
 168 +
 169 +               uart3: serial@01c28c00 {
 170 +                       pinctrl-names = "default";
 171 +                       pinctrl-0 = <&uart3_pins_b>;
 172 +                       status = "okay";
 173 +               };
 174 +
 175 +               uart7: serial@01c29c00 {
 176 +                       pinctrl-names = "default";
 177 +                       pinctrl-0 = <&uart7_pins_a>;
 178 +                       status = "okay";
 179 +               };
 180 +
 181 +               i2c0: i2c@01c2ac00 {
 182 +                       pinctrl-names = "default";
 183 +                       pinctrl-0 = <&i2c0_pins_a>;
 184 +                       status = "okay";
 185 +
 186 +                       axp209: pmic@34 {
 187 +                               compatible = "x-powers,axp209";
 188 +                               reg = <0x34>;
 189 +                               interrupt-parent = <&nmi_intc>;
 190 +                               interrupts = <0 8>;
 191 +
 192 +                               interrupt-controller;
 193 +                               #interrupt-cells = <1>;
 194 +                       };
 195 +               };
 196 +
 197 +               i2c2: i2c@01c2b400 {
 198 +                       pinctrl-names = "default";
 199 +                       pinctrl-0 = <&i2c2_pins_a>;
 200 +                       status = "okay";
 201 +               };
 202 +
 203 +               gmac: ethernet@01c50000 {
 204 +                       pinctrl-names = "default";
 205 +                       pinctrl-0 = <&gmac_pins_rgmii_a>;
 206 +                       phy = <&phy1>;
 207 +                       phy-mode = "rgmii";
 208 +                       phy-supply = <&reg_gmac_3v3>;
 209 +                       status = "okay";
 210 +
 211 +                       phy1: ethernet-phy@1 {
 212 +                               reg = <1>;
 213 +                       };
 214 +               };
 215 +       };
 216 +
 217 +       leds {
 218 +               compatible = "gpio-leds";
 219 +               pinctrl-names = "default";
 220 +               pinctrl-0 = <&led_pins_bananapro>;
 221 +
 222 +               green {
 223 +                       label = "bananapro:green:usr";
 224 +                       gpios = <&pio 7 24 0>;
 225 +               };
 226 +       };
 227 +
 228 +       reg_usb1_vbus: usb1-vbus {
 229 +               status = "okay";
 230 +       };
 231 +
 232 +       reg_usb2_vbus: usb2-vbus {
 233 +               status = "okay";
 234 +       };
 235 +
 236 +       reg_gmac_3v3: gmac-3v3 {
 237 +               compatible = "regulator-fixed";
 238 +               pinctrl-names = "default";
 239 +               pinctrl-0 = <&gmac_power_pin_bananapro>;
 240 +               regulator-name = "gmac-3v3";
 241 +               regulator-min-microvolt = <3300000>;
 242 +               regulator-max-microvolt = <3300000>;
 243 +               startup-delay-us = <50000>;
 244 +               enable-active-high;
 245 +               gpio = <&pio 7 23 0>;
 246 +       };
 247 +};