target/linux/s3c24xx/files-2.6.31/arch/arm/mach-s3c2442/gta02-pm-bt.c

   1 /*
   2  * Bluetooth PM code for the Openmoko Freerunner GSM Phone
   3  *
   4  * (C) 2007 by Openmoko Inc.
   5  * Author: Harald Welte <laforge@openmoko.org>
   6  * All rights reserved.
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation
  11  *
  12  */
  13
  14 #include <linux/module.h>
  15 #include <linux/init.h>
  16 #include <linux/kernel.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/rfkill.h>
  19 #include <linux/err.h>
  20 #include <mach/gpio-fns.h>
  21
  22 #include <mach/hardware.h>
  23 #include <asm/mach-types.h>
  24
  25 #include <mach/gta02.h>
  26 #include <linux/mfd/pcf50633/gpio.h>
  27
  28 #include <linux/regulator/consumer.h>
  29
  30 #define DRVMSG "Openmoko Freerunner Bluetooth Power Management"
  31
  32 struct gta02_pm_bt_data {
  33         struct regulator *regulator;
  34         struct rfkill *rfkill;
  35         int pre_resume_state;
  36 };
  37
  38 static ssize_t bt_read(struct device *dev, struct device_attribute *attr,
  39                        char *buf)
  40 {
  41         int ret = 0;
  42         if (!strcmp(attr->attr.name, "power_on")) {
  43                 if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN))
  44                         ret = 1;
  45         } else if (!strcmp(attr->attr.name, "reset")) {
  46                 if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN) == 0)
  47                         ret = 1;
  48         }
  49
  50         if (!ret) {
  51                 return strlcpy(buf, "0\n", 3);
  52         } else {
  53                 return strlcpy(buf, "1\n", 3);
  54         }
  55 }
  56
  57 static void __gta02_pm_bt_toggle_radio(struct device *dev, unsigned int on)
  58 {
  59         struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
  60
  61         dev_info(dev, "__gta02_pm_bt_toggle_radio %d\n", on);
  62
  63         bt_data = dev_get_drvdata(dev);
  64
  65         s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, !on);
  66
  67         if (on) {
  68                 if (!regulator_is_enabled(bt_data->regulator))
  69                         regulator_enable(bt_data->regulator);
  70         } else {
  71                 if (regulator_is_enabled(bt_data->regulator))
  72                         regulator_disable(bt_data->regulator);
  73         }
  74
  75         s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on);
  76 }
  77
  78
  79 static int bt_rfkill_set_block(void *data, bool blocked)
  80 {
  81         struct device *dev = data;
  82
  83         __gta02_pm_bt_toggle_radio(dev, !blocked);
  84
  85         return 0;
  86 }
  87
  88 static const struct rfkill_ops gta02_bt_rfkill_ops = {
  89        .set_block = bt_rfkill_set_block,
  90 };
  91
  92
  93 static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
  94                         const char *buf, size_t count)
  95 {
  96         unsigned long on = simple_strtoul(buf, NULL, 10);
  97         struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
  98
  99         if (!strcmp(attr->attr.name, "power_on")) {
 100                 rfkill_set_sw_state(bt_data->rfkill, on ? 1 : 0);
 101
 102                 __gta02_pm_bt_toggle_radio(dev, on);
 103         } else if (!strcmp(attr->attr.name, "reset")) {
 104                 /* reset is low-active, so we need to invert */
 105                 s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1);
 106         }
 107
 108         return count;
 109 }
 110
 111 static DEVICE_ATTR(power_on, 0644, bt_read, bt_write);
 112 static DEVICE_ATTR(reset, 0644, bt_read, bt_write);
 113
 114 #ifdef CONFIG_PM
 115 static int gta02_bt_suspend(struct platform_device *pdev, pm_message_t state)
 116 {
 117         struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
 118
 119         dev_dbg(&pdev->dev, DRVMSG ": suspending\n");
 120
 121         bt_data->pre_resume_state = s3c2410_gpio_getpin(GTA02_GPIO_BT_EN);
 122         __gta02_pm_bt_toggle_radio(&pdev->dev, 0);
 123
 124         return 0;
 125 }
 126
 127 static int gta02_bt_resume(struct platform_device *pdev)
 128 {
 129         struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
 130         dev_dbg(&pdev->dev, DRVMSG ": resuming\n");
 131
 132         __gta02_pm_bt_toggle_radio(&pdev->dev, bt_data->pre_resume_state);
 133         return 0;
 134 }
 135 #else
 136 #define gta02_bt_suspend        NULL
 137 #define gta02_bt_resume         NULL
 138 #endif
 139
 140 static struct attribute *gta02_bt_sysfs_entries[] = {
 141         &dev_attr_power_on.attr,
 142         &dev_attr_reset.attr,
 143         NULL
 144 };
 145
 146 static struct attribute_group gta02_bt_attr_group = {
 147         .name   = NULL,
 148         .attrs  = gta02_bt_sysfs_entries,
 149 };
 150
 151 static int __init gta02_bt_probe(struct platform_device *pdev)
 152 {
 153         struct rfkill *rfkill;
 154         struct regulator *regulator;
 155         struct gta02_pm_bt_data *bt_data;
 156         int ret;
 157
 158         dev_info(&pdev->dev, DRVMSG ": starting\n");
 159
 160         bt_data = kzalloc(sizeof(*bt_data), GFP_KERNEL);
 161         dev_set_drvdata(&pdev->dev, bt_data);
 162
 163         regulator = regulator_get(&pdev->dev, "BT_3V2");
 164         if (IS_ERR(regulator))
 165                 return -ENODEV;
 166
 167         bt_data->regulator = regulator;
 168
 169         /* this tests the true physical state of the regulator... */
 170         if (regulator_is_enabled(regulator)) {
 171                 /*
 172                  * but these only operate on the logical state of the
 173                  * regulator... so we need to logicaly "adopt" it on
 174                  * to turn it off
 175                  */
 176                 regulator_enable(regulator);
 177                 regulator_disable(regulator);
 178         }
 179
 180         /* we pull reset to low to make sure that the chip doesn't
 181          * drain power through the reset line */
 182         s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, 0);
 183
 184         rfkill = rfkill_alloc(pdev->name, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
 185                             &gta02_bt_rfkill_ops, &pdev->dev);
 186
 187         if (!rfkill) {
 188                 dev_err(&pdev->dev, "Failed to allocate rfkill\n");
 189                 return -ENOMEM;
 190         }
 191
 192     rfkill_init_sw_state(rfkill, 0);
 193
 194         ret = rfkill_register(rfkill);
 195         if (ret) {
 196                 rfkill_destroy(rfkill);
 197                 dev_err(&pdev->dev, "Failed to register rfkill\n");
 198                 return ret;
 199         }
 200
 201         bt_data->rfkill = rfkill;
 202
 203         return sysfs_create_group(&pdev->dev.kobj, &gta02_bt_attr_group);
 204 }
 205
 206 static int gta02_bt_remove(struct platform_device *pdev)
 207 {
 208         struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
 209         struct regulator *regulator;
 210
 211         sysfs_remove_group(&pdev->dev.kobj, &gta02_bt_attr_group);
 212
 213         if (bt_data->rfkill) {
 214                 rfkill_destroy(bt_data->rfkill);
 215         }
 216
 217         if (!bt_data || !bt_data->regulator)
 218                 return 0;
 219
 220         regulator = bt_data->regulator;
 221
 222         /* Make sure regulator is disabled before calling regulator_put */
 223         if (regulator_is_enabled(regulator))
 224                 regulator_disable(regulator);
 225
 226         regulator_put(regulator);
 227
 228         kfree(bt_data);
 229
 230         return 0;
 231 }
 232
 233 static struct platform_driver gta02_bt_driver = {
 234         .probe          = gta02_bt_probe,
 235         .remove         = gta02_bt_remove,
 236         .suspend        = gta02_bt_suspend,
 237         .resume         = gta02_bt_resume,
 238         .driver         = {
 239                 .name           = "gta02-pm-bt",
 240         },
 241 };
 242
 243 static int __devinit gta02_bt_init(void)
 244 {
 245         return platform_driver_register(&gta02_bt_driver);
 246 }
 247
 248 static void gta02_bt_exit(void)
 249 {
 250         platform_driver_unregister(&gta02_bt_driver);
 251 }
 252
 253 module_init(gta02_bt_init);
 254 module_exit(gta02_bt_exit);
 255
 256 MODULE_LICENSE("GPL");
 257 MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
 258 MODULE_DESCRIPTION(DRVMSG);