target/linux/ramips/patches-3.9/0140-MIPS-ralink-DTS-file-updates.patch

   1 From cee339922876e924295c27e274923d1b381f5057 Mon Sep 17 00:00:00 2001
   2 From: John Crispin <blogic@openwrt.org>
   3 Date: Tue, 30 Apr 2013 17:27:46 +0200
   4 Subject: [PATCH 140/164] MIPS: ralink DTS file updates
   5
   6 Signed-off-by: John Crispin <blogic@openwrt.org>
   7 ---
   8  arch/mips/ralink/Kconfig                      |    8 +
   9  arch/mips/ralink/dts/Makefile                 |    2 +
  10  arch/mips/ralink/dts/mt7620a.dtsi             |  238 ++++++++++++++++++++++++-
  11  arch/mips/ralink/dts/mt7620a_eval.dts         |  111 ++++++++++++
  12  arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts |   99 ++++++++++
  13  arch/mips/ralink/dts/rt2880.dtsi              |   17 ++
  14  arch/mips/ralink/dts/rt2880_eval.dts          |    6 +
  15  arch/mips/ralink/dts/rt3050.dtsi              |   31 +++-
  16  arch/mips/ralink/dts/rt3052_eval.dts          |   19 +-
  17  arch/mips/ralink/dts/rt5350.dtsi              |  227 +++++++++++++++++++++++
  18  arch/mips/ralink/dts/rt5350_eval.dts          |   69 +++++++
  19  11 files changed, 824 insertions(+), 3 deletions(-)
  20  create mode 100644 arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts
  21  create mode 100644 arch/mips/ralink/dts/rt5350.dtsi
  22  create mode 100644 arch/mips/ralink/dts/rt5350_eval.dts
  23
  24 --- a/arch/mips/ralink/Kconfig
  25 +++ b/arch/mips/ralink/Kconfig
  26 @@ -42,6 +42,10 @@ choice
  27                 bool "RT305x eval kit"
  28                 depends on SOC_RT305X
  29
  30 +       config DTB_RT5350_EVAL
  31 +               bool "RT5350 eval kit"
  32 +               depends on SOC_RT305X
  33 +
  34         config DTB_RT3883_EVAL
  35                 bool "RT3883 eval kit"
  36                 depends on SOC_RT3883
  37 @@ -50,6 +54,10 @@ choice
  38                 bool "MT7620A eval kit"
  39                 depends on SOC_MT7620
  40
  41 +       config DTB_MT7620A_MT7610E_EVAL
  42 +               bool "MT7620A + MT7610E eval kit"
  43 +               depends on SOC_MT7620
  44 +
  45  endchoice
  46
  47  endif
  48 --- a/arch/mips/ralink/dts/Makefile
  49 +++ b/arch/mips/ralink/dts/Makefile
  50 @@ -1,4 +1,6 @@
  51  obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
  52  obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
  53 +obj-$(CONFIG_DTB_RT5350_EVAL) := rt5350_eval.dtb.o
  54  obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
  55  obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
  56 +obj-$(CONFIG_DTB_MT7620A_MT7610E_EVAL) := mt7620a_mt7610e_eval.dtb.o
  57 --- a/arch/mips/ralink/dts/mt7620a.dtsi
  58 +++ b/arch/mips/ralink/dts/mt7620a.dtsi
  59 @@ -25,14 +25,36 @@
  60                 #size-cells = <1>;
  61
  62                 sysc@0 {
  63 -                       compatible = "ralink,mt7620a-sysc";
  64 +                       compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc";
  65                         reg = <0x0 0x100>;
  66                 };
  67
  68 +               timer@100 {
  69 +                       compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
  70 +                       reg = <0x100 0x20>;
  71 +
  72 +                       interrupt-parent = <&intc>;
  73 +                       interrupts = <1>;
  74 +               };
  75 +
  76 +               watchdog@120 {
  77 +                       compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
  78 +                       reg = <0x120 0x10>;
  79 +
  80 +                       resets = <&rstctrl 8>;
  81 +                       reset-names = "wdt";
  82 +
  83 +                       interrupt-parent = <&intc>;
  84 +                       interrupts = <1>;
  85 +               };
  86 +
  87                 intc: intc@200 {
  88                         compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
  89                         reg = <0x200 0x100>;
  90
  91 +                       resets = <&rstctrl 19>;
  92 +                       reset-names = "intc";
  93 +
  94                         interrupt-controller;
  95                         #interrupt-cells = <1>;
  96
  97 @@ -43,16 +65,230 @@
  98                 memc@300 {
  99                         compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
 100                         reg = <0x300 0x100>;
 101 +
 102 +                       resets = <&rstctrl 20>;
 103 +                       reset-names = "mc";
 104 +
 105 +                       interrupt-parent = <&intc>;
 106 +                       interrupts = <3>;
 107 +               };
 108 +
 109 +               uart@500 {
 110 +                       compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
 111 +                       reg = <0x500 0x100>;
 112 +
 113 +                       resets = <&rstctrl 12>;
 114 +                       reset-names = "uart";
 115 +
 116 +                       interrupt-parent = <&intc>;
 117 +                       interrupts = <5>;
 118 +
 119 +                       reg-shift = <2>;
 120 +
 121 +                       status = "disabled";
 122 +               };
 123 +
 124 +               gpio0: gpio@600 {
 125 +                       compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
 126 +                       reg = <0x600 0x34>;
 127 +
 128 +                       resets = <&rstctrl 13>;
 129 +                       reset-names = "pio";
 130 +
 131 +                       interrupt-parent = <&intc>;
 132 +                       interrupts = <6>;
 133 +
 134 +                       gpio-controller;
 135 +                       #gpio-cells = <2>;
 136 +
 137 +                       ralink,gpio-base = <0>;
 138 +                       ralink,num-gpios = <24>;
 139 +                       ralink,register-map = [ 00 04 08 0c
 140 +                                               20 24 28 2c
 141 +                                               30 34 ];
 142 +
 143 +                       status = "disabled";
 144 +               };
 145 +
 146 +               gpio1: gpio@638 {
 147 +                       compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
 148 +                       reg = <0x638 0x24>;
 149 +
 150 +                       interrupt-parent = <&intc>;
 151 +                       interrupts = <6>;
 152 +
 153 +                       gpio-controller;
 154 +                       #gpio-cells = <2>;
 155 +
 156 +                       ralink,gpio-base = <24>;
 157 +                       ralink,num-gpios = <16>;
 158 +                       ralink,register-map = [ 00 04 08 0c
 159 +                                               10 14 18 1c
 160 +                                               20 24 ];
 161 +
 162 +                       status = "disabled";
 163 +               };
 164 +
 165 +               gpio2: gpio@660 {
 166 +                       compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
 167 +                       reg = <0x660 0x24>;
 168 +
 169 +                       interrupt-parent = <&intc>;
 170 +                       interrupts = <6>;
 171 +
 172 +                       gpio-controller;
 173 +                       #gpio-cells = <2>;
 174 +
 175 +                       ralink,gpio-base = <40>;
 176 +                       ralink,num-gpios = <32>;
 177 +                       ralink,register-map = [ 00 04 08 0c
 178 +                                               10 14 18 1c
 179 +                                               20 24 ];
 180 +
 181 +                       status = "disabled";
 182 +               };
 183 +
 184 +               i2c@900 {
 185 +                       compatible = "link,mt7620a-i2c", "ralink,rt2880-i2c";
 186 +                       reg = <0x900 0x100>;
 187 +
 188 +                       resets = <&rstctrl 16>;
 189 +                       reset-names = "i2c";
 190 +
 191 +                       #address-cells = <1>;
 192 +                       #size-cells = <0>;
 193 +
 194 +                       status = "disabled";
 195 +               };
 196 +
 197 +               spi@b00 {
 198 +                       compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
 199 +                       reg = <0xb00 0x100>;
 200 +
 201 +                       resets = <&rstctrl 18>;
 202 +                       reset-names = "spi";
 203 +
 204 +                       #address-cells = <1>;
 205 +                       #size-cells = <1>;
 206 +
 207 +                       status = "disabled";
 208                 };
 209
 210                 uartlite@c00 {
 211                         compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
 212                         reg = <0xc00 0x100>;
 213
 214 +                       resets = <&rstctrl 19>;
 215 +                       reset-names = "uartl";
 216 +
 217                         interrupt-parent = <&intc>;
 218                         interrupts = <12>;
 219
 220                         reg-shift = <2>;
 221                 };
 222 +
 223 +               systick@d00 {
 224 +                       compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
 225 +                       reg = <0xd00 0x10>;
 226 +
 227 +                       resets = <&rstctrl 28>;
 228 +                       reset-names = "intc";
 229 +
 230 +                       interrupt-parent = <&cpuintc>;
 231 +                       interrupts = <7>;
 232 +               };
 233 +
 234 +               gdma@2800 {
 235 +                       compatible = "ralink,mt7620a-gdma", "ralink,rt2880-gdma";
 236 +                       reg = <0x2800 0x800>;
 237 +
 238 +                       resets = <&rstctrl 14>;
 239 +                       reset-names = "dma";
 240 +
 241 +                       interrupt-parent = <&intc>;
 242 +                       interrupts = <7>;
 243 +               };
 244 +       };
 245 +
 246 +       rstctrl: rstctrl {
 247 +               compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
 248 +               #reset-cells = <1>;
 249 +       };
 250 +
 251 +       ubsphy {
 252 +               compatible = "ralink,mt7620a-usbphy";
 253 +
 254 +               resets = <&rstctrl 22 &rstctrl 25>;
 255 +               reset-names = "host", "device";
 256 +       };
 257 +
 258 +       ethernet@10100000 {
 259 +               compatible = "ralink,mt7620a-eth";
 260 +               reg = <0x10100000 10000>;
 261 +
 262 +               #address-cells = <1>;
 263 +               #size-cells = <0>;
 264 +
 265 +               interrupt-parent = <&cpuintc>;
 266 +               interrupts = <5>;
 267 +
 268 +               status = "disabled";
 269 +
 270 +               mdio-bus {
 271 +                       #address-cells = <1>;
 272 +                       #size-cells = <0>;
 273 +
 274 +                       status = "disabled";
 275 +               };
 276 +       };
 277 +
 278 +       gsw@10110000 {
 279 +               compatible = "ralink,mt7620a-gsw";
 280 +               reg = <0x10110000 8000>;
 281 +
 282 +               interrupt-parent = <&intc>;
 283 +               interrupts = <17>;
 284 +
 285 +               status = "disabled";
 286 +       };
 287 +
 288 +       sdhci@10130000 {
 289 +               compatible = "ralink,mt7620a-sdhci";
 290 +               reg = <0x10130000 4000>;
 291 +
 292 +               interrupt-parent = <&intc>;
 293 +               interrupts = <14>;
 294 +
 295 +               status = "disabled";
 296 +       };
 297 +
 298 +       ehci@101c0000 {
 299 +               compatible = "ralink,rt3xxx-ehci";
 300 +               reg = <0x101c0000 0x1000>;
 301 +
 302 +               interrupt-parent = <&intc>;
 303 +               interrupts = <18>;
 304 +       };
 305 +
 306 +       ohci@101c1000 {
 307 +               compatible = "ralink,rt3xxx-ohci";
 308 +               reg = <0x101c1000 0x1000>;
 309 +
 310 +               interrupt-parent = <&intc>;
 311 +               interrupts = <18>;
 312 +       };
 313 +
 314 +       pcie@10140000 {
 315 +               compatible = "ralink,mt7620a-pci";
 316 +               reg = <0x10140000 0x100
 317 +                       0x10142000 0x100>;
 318 +
 319 +               resets = <&rstctrl 26>;
 320 +               reset-names = "pcie0";
 321 +
 322 +               interrupt-parent = <&cpuintc>;
 323 +               interrupts = <4>;
 324 +
 325 +               status = "disabled";
 326         };
 327  };
 328 --- a/arch/mips/ralink/dts/mt7620a_eval.dts
 329 +++ b/arch/mips/ralink/dts/mt7620a_eval.dts
 330 @@ -13,4 +13,115 @@
 331         chosen {
 332                 bootargs = "console=ttyS0,57600";
 333         };
 334 +
 335 +       palmbus@10000000 {
 336 +               sysc@0 {
 337 +                       ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
 338 +                       ralink,gpiomux = "i2c", "jtag";
 339 +                       ralink,uartmux = "gpio";
 340 +                       ralink,wdtmux = <1>;
 341 +               };
 342 +
 343 +               gpio0: gpio@600 {
 344 +                       status = "okay";
 345 +               };
 346 +
 347 +               spi@b00 {
 348 +                       status = "okay";
 349 +
 350 +                       m25p80@0 {
 351 +                               #address-cells = <1>;
 352 +                               #size-cells = <1>;
 353 +                               compatible = "en25q64";
 354 +                               reg = <0 0>;
 355 +                               linux,modalias = "m25p80", "en25q64";
 356 +                               spi-max-frequency = <10000000>;
 357 +
 358 +                               partition@0 {
 359 +                                       label = "u-boot";
 360 +                                       reg = <0x0 0x30000>;
 361 +                                       read-only;
 362 +                               };
 363 +
 364 +                               partition@30000 {
 365 +                                       label = "u-boot-env";
 366 +                                       reg = <0x30000 0x10000>;
 367 +                                       read-only;
 368 +                               };
 369 +
 370 +                               factory: partition@40000 {
 371 +                                       label = "factory";
 372 +                                       reg = <0x40000 0x10000>;
 373 +                                       read-only;
 374 +                               };
 375 +
 376 +                               partition@50000 {
 377 +                                       label = "firmware";
 378 +                                       reg = <0x50000 0x7b0000>;
 379 +                               };
 380 +                       };
 381 +               };
 382 +       };
 383 +
 384 +       ethernet@10100000 {
 385 +               status = "okay";
 386 +
 387 +               port@4 {
 388 +                       compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
 389 +                       reg = <4>;
 390 +                       phy-mode = "rgmii";
 391 +                       phy-handle = <&phy4>;
 392 +               };
 393 +
 394 +               port@5 {
 395 +                       compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
 396 +                       reg = <5>;
 397 +                       phy-mode = "rgmii";
 398 +                       phy-handle = <&phy5>;
 399 +               };
 400 +
 401 +               mdio-bus {
 402 +                       status = "okay";
 403 +
 404 +                       phy4: ethernet-phy@4 {
 405 +                               reg = <4>;
 406 +                               phy-mode = "rgmii";
 407 +                       };
 408 +
 409 +                       phy5: ethernet-phy@5 {
 410 +                               reg = <5>;
 411 +                               phy-mode = "rgmii";
 412 +                       };
 413 +               };
 414 +       };
 415 +
 416 +       gsw@10110000 {
 417 +               status = "okay";
 418 +               ralink,port4 = "gmac";
 419 +       };
 420 +
 421 +       sdhci@10130000 {
 422 +               status = "okay";
 423 +       };
 424 +
 425 +       pcie@10140000 {
 426 +               status = "okay";
 427 +       };
 428 +
 429 +       gpio-keys-polled {
 430 +               compatible = "gpio-keys";
 431 +               #address-cells = <1>;
 432 +               #size-cells = <0>;
 433 +               poll-interval = <20>;
 434 +               s2 {
 435 +                       label = "S2";
 436 +                       gpios = <&gpio0 1 1>;
 437 +                       linux,code = <0x100>;
 438 +               };
 439 +               s3 {
 440 +                       label = "S3";
 441 +                       gpios = <&gpio0 2 1>;
 442 +                       linux,code = <0x101>;
 443 +               };
 444 +       };
 445  };
 446 --- /dev/null
 447 +++ b/arch/mips/ralink/dts/mt7620a_mt7610e_eval.dts
 448 @@ -0,0 +1,99 @@
 449 +/dts-v1/;
 450 +
 451 +/include/ "mt7620a.dtsi"
 452 +
 453 +/ {
 454 +       compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
 455 +       model = "Ralink MT7620A evaluation board";
 456 +
 457 +       memory@0 {
 458 +               reg = <0x0 0x2000000>;
 459 +       };
 460 +
 461 +       chosen {
 462 +               bootargs = "console=ttyS0,57600";
 463 +       };
 464 +
 465 +       palmbus@10000000 {
 466 +               sysc@0 {
 467 +                       ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
 468 +                       ralink,gpiomux = "i2c", "jtag";
 469 +                       ralink,uartmux = "gpio";
 470 +                       ralink,wdtmux = <1>;
 471 +               };
 472 +
 473 +               gpio0: gpio@600 {
 474 +                       status = "okay";
 475 +               };
 476 +
 477 +               spi@b00 {
 478 +                       status = "okay";
 479 +
 480 +                       m25p80@0 {
 481 +                               #address-cells = <1>;
 482 +                               #size-cells = <1>;
 483 +                               compatible = "en25q64";
 484 +                               reg = <0 0>;
 485 +                               linux,modalias = "m25p80", "en25q64";
 486 +                               spi-max-frequency = <10000000>;
 487 +
 488 +                               partition@0 {
 489 +                                       label = "u-boot";
 490 +                                       reg = <0x0 0x30000>;
 491 +                                       read-only;
 492 +                               };
 493 +
 494 +                               partition@30000 {
 495 +                                       label = "u-boot-env";
 496 +                                       reg = <0x30000 0x10000>;
 497 +                                       read-only;
 498 +                               };
 499 +
 500 +                               factory: partition@40000 {
 501 +                                       label = "factory";
 502 +                                       reg = <0x40000 0x10000>;
 503 +                                       read-only;
 504 +                               };
 505 +
 506 +                               partition@50000 {
 507 +                                       label = "firmware";
 508 +                                       reg = <0x50000 0x7b0000>;
 509 +                               };
 510 +                       };
 511 +               };
 512 +       };
 513 +
 514 +       ethernet@10100000 {
 515 +               status = "okay";
 516 +       };
 517 +
 518 +       gsw@10110000 {
 519 +               status = "okay";
 520 +               ralink,port4 = "ephy";
 521 +       };
 522 +
 523 +       sdhci@10130000 {
 524 +               status = "okay";
 525 +       };
 526 +
 527 +       pcie@10140000 {
 528 +               status = "okay";
 529 +       };
 530 +
 531 +       gpio-keys-polled {
 532 +               compatible = "gpio-keys";
 533 +               #address-cells = <1>;
 534 +               #size-cells = <0>;
 535 +               poll-interval = <20>;
 536 +               wps {
 537 +                       label = "wps";
 538 +                       gpios = <&gpio0 12 1>;
 539 +                       linux,code = <0x100>;
 540 +               };
 541 +               reset {
 542 +                       label = "reset";
 543 +                       gpios = <&gpio0 13 1>;
 544 +                       linux,code = <0x101>;
 545 +               };
 546 +       };
 547 +};
 548 --- a/arch/mips/ralink/dts/rt2880.dtsi
 549 +++ b/arch/mips/ralink/dts/rt2880.dtsi
 550 @@ -55,4 +55,21 @@
 551                         reg-shift = <2>;
 552                 };
 553         };
 554 +
 555 +       ethernet@400000 {
 556 +               compatible = "ralink,rt2880-eth";
 557 +               reg = <0x00400000 10000>;
 558 +
 559 +               interrupt-parent = <&cpuintc>;
 560 +               interrupts = <5>;
 561 +
 562 +               status = "disabled";
 563 +
 564 +               mdio-bus {
 565 +                       #address-cells = <1>;
 566 +                       #size-cells = <0>;
 567 +
 568 +                       status = "disabled";
 569 +               };
 570 +       };
 571  };
 572 --- a/arch/mips/ralink/dts/rt2880_eval.dts
 573 +++ b/arch/mips/ralink/dts/rt2880_eval.dts
 574 @@ -43,4 +43,10 @@
 575                         reg = <0x50000 0x3b0000>;
 576                 };
 577         };
 578 +
 579 +       ethernet@400000 {
 580 +               status = "okay";
 581 +
 582 +               ralink,fixed-link = <1000 1 1 1>;
 583 +       };
 584  };
 585 --- a/arch/mips/ralink/dts/rt3050.dtsi
 586 +++ b/arch/mips/ralink/dts/rt3050.dtsi
 587 @@ -1,7 +1,7 @@
 588  / {
 589         #address-cells = <1>;
 590         #size-cells = <1>;
 591 -       compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
 592 +       compatible = "ralink,rt3050-soc", "ralink,rt3052-soc";
 593
 594         cpus {
 595                 cpu@0 {
 596 @@ -45,6 +45,15 @@
 597                         reg = <0x300 0x100>;
 598                 };
 599
 600 +               i2c@900 {
 601 +                       compatible = "link,rt3052-i2c", "ralink,rt2880-i2c";
 602 +                       reg = <0x900 0x100>;
 603 +                       #address-cells = <1>;
 604 +                       #size-cells = <0>;
 605 +
 606 +                       status = "disabled";
 607 +               };
 608 +
 609                 uartlite@c00 {
 610                         compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
 611                         reg = <0xc00 0x100>;
 612 @@ -55,4 +64,24 @@
 613                         reg-shift = <2>;
 614                 };
 615         };
 616 +
 617 +       ethernet@10100000 {
 618 +               compatible = "ralink,rt3050-eth";
 619 +               reg = <0x10100000 10000>;
 620 +
 621 +               interrupt-parent = <&cpuintc>;
 622 +               interrupts = <5>;
 623 +
 624 +               status = "disabled";
 625 +       };
 626 +
 627 +       esw@10110000 {
 628 +               compatible = "ralink,rt3050-esw";
 629 +               reg = <0x10110000 8000>;
 630 +
 631 +               interrupt-parent = <&intc>;
 632 +               interrupts = <17>;
 633 +
 634 +               status = "disabled";
 635 +       };
 636  };
 637 --- a/arch/mips/ralink/dts/rt3052_eval.dts
 638 +++ b/arch/mips/ralink/dts/rt3052_eval.dts
 639 @@ -3,7 +3,7 @@
 640  /include/ "rt3050.dtsi"
 641
 642  / {
 643 -       compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
 644 +       compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc", "ralink,rt5350-soc";
 645         model = "Ralink RT3052 evaluation board";
 646
 647         memory@0 {
 648 @@ -14,6 +14,14 @@
 649                 bootargs = "console=ttyS0,57600";
 650         };
 651
 652 +       palmbus@10000000 {
 653 +               sysc@0 {
 654 +                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
 655 +                       ralink,uartmux = "gpio";
 656 +                       ralink,wdtmux = <1>;
 657 +               };
 658 +       };
 659 +
 660         cfi@1f000000 {
 661                 compatible = "cfi-flash";
 662                 reg = <0x1f000000 0x800000>;
 663 @@ -43,4 +51,13 @@
 664                         reg = <0x50000 0x7b0000>;
 665                 };
 666         };
 667 +
 668 +       ethernet@10100000 {
 669 +               status = "okay";
 670 +       };
 671 +
 672 +       esw@10110000 {
 673 +               status = "okay";
 674 +               ralink,portmap = <0x2f>;
 675 +       };
 676  };
 677 --- /dev/null
 678 +++ b/arch/mips/ralink/dts/rt5350.dtsi
 679 @@ -0,0 +1,227 @@
 680 +/ {
 681 +       #address-cells = <1>;
 682 +       #size-cells = <1>;
 683 +       compatible = "ralink,rt5350-soc";
 684 +
 685 +       cpus {
 686 +               cpu@0 {
 687 +                       compatible = "mips,mips24KEc";
 688 +               };
 689 +       };
 690 +
 691 +       cpuintc: cpuintc@0 {
 692 +               #address-cells = <0>;
 693 +               #interrupt-cells = <1>;
 694 +               interrupt-controller;
 695 +               compatible = "mti,cpu-interrupt-controller";
 696 +       };
 697 +
 698 +       palmbus@10000000 {
 699 +               compatible = "palmbus";
 700 +               reg = <0x10000000 0x200000>;
 701 +               ranges = <0x0 0x10000000 0x1FFFFF>;
 702 +
 703 +               #address-cells = <1>;
 704 +               #size-cells = <1>;
 705 +
 706 +               sysc@0 {
 707 +                       compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc";
 708 +                       reg = <0x0 0x100>;
 709 +               };
 710 +
 711 +               timer@100 {
 712 +                       compatible = "ralink,rt5350-timer", "ralink,rt2880-timer";
 713 +                       reg = <0x100 0x20>;
 714 +
 715 +                       interrupt-parent = <&intc>;
 716 +                       interrupts = <1>;
 717 +               };
 718 +
 719 +               watchdog@120 {
 720 +                       compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt";
 721 +                       reg = <0x120 0x10>;
 722 +
 723 +                       resets = <&rstctrl 8>;
 724 +                       reset-names = "wdt";
 725 +
 726 +                       interrupt-parent = <&intc>;
 727 +                       interrupts = <1>;
 728 +               };
 729 +
 730 +               intc: intc@200 {
 731 +                       compatible = "ralink,rt5350-intc", "ralink,rt2880-intc";
 732 +                       reg = <0x200 0x100>;
 733 +
 734 +                       resets = <&rstctrl 19>;
 735 +                       reset-names = "intc";
 736 +
 737 +                       interrupt-controller;
 738 +                       #interrupt-cells = <1>;
 739 +
 740 +                       interrupt-parent = <&cpuintc>;
 741 +                       interrupts = <2>;
 742 +               };
 743 +
 744 +               memc@300 {
 745 +                       compatible = "ralink,rt5350-memc", "ralink,rt3050-memc";
 746 +                       reg = <0x300 0x100>;
 747 +
 748 +                       resets = <&rstctrl 20>;
 749 +                       reset-names = "mc";
 750 +
 751 +                       interrupt-parent = <&intc>;
 752 +                       interrupts = <3>;
 753 +               };
 754 +
 755 +               uart@500 {
 756 +                       compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
 757 +                       reg = <0x500 0x100>;
 758 +
 759 +                       resets = <&rstctrl 12>;
 760 +                       reset-names = "uart";
 761 +
 762 +                       interrupt-parent = <&intc>;
 763 +                       interrupts = <5>;
 764 +
 765 +                       reg-shift = <2>;
 766 +
 767 +                       status = "disabled";
 768 +               };
 769 +
 770 +               gpio0: gpio@600 {
 771 +                       compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
 772 +                       reg = <0x600 0x34>;
 773 +
 774 +                       resets = <&rstctrl 13>;
 775 +                       reset-names = "pio";
 776 +
 777 +                       interrupt-parent = <&intc>;
 778 +                       interrupts = <6>;
 779 +
 780 +                       gpio-controller;
 781 +                       #gpio-cells = <2>;
 782 +
 783 +                       ralink,gpio-base = <0>;
 784 +                       ralink,num-gpios = <24>;
 785 +                       ralink,register-map = [ 00 04 08 0c
 786 +                                               20 24 28 2c
 787 +                                               30 34 ];
 788 +
 789 +                       status = "disabled";
 790 +               };
 791 +
 792 +               gpio1: gpio@638 {
 793 +                       compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
 794 +                       reg = <0x638 0x24>;
 795 +
 796 +                       interrupt-parent = <&intc>;
 797 +                       interrupts = <6>;
 798 +
 799 +                       gpio-controller;
 800 +                       #gpio-cells = <2>;
 801 +
 802 +                       ralink,gpio-base = <24>;
 803 +                       ralink,num-gpios = <16>;
 804 +                       ralink,register-map = [ 00 04 08 0c
 805 +                                               10 14 18 1c
 806 +                                               20 24 ];
 807 +
 808 +                       status = "disabled";
 809 +               };
 810 +
 811 +               i2c@900 {
 812 +                       compatible = "link,rt5350-i2c", "ralink,rt2880-i2c";
 813 +                       reg = <0x900 0x100>;
 814 +
 815 +                       resets = <&rstctrl 16>;
 816 +                       reset-names = "i2c";
 817 +
 818 +                       #address-cells = <1>;
 819 +                       #size-cells = <0>;
 820 +
 821 +                       status = "disabled";
 822 +               };
 823 +
 824 +               spi@b00 {
 825 +                       compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
 826 +                       reg = <0xb00 0x100>;
 827 +
 828 +                       resets = <&rstctrl 18>;
 829 +                       reset-names = "spi";
 830 +
 831 +                       #address-cells = <1>;
 832 +                       #size-cells = <1>;
 833 +
 834 +                       status = "disabled";
 835 +               };
 836 +
 837 +               uartlite@c00 {
 838 +                       compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
 839 +                       reg = <0xc00 0x100>;
 840 +
 841 +                       resets = <&rstctrl 19>;
 842 +                       reset-names = "uartl";
 843 +
 844 +                       interrupt-parent = <&intc>;
 845 +                       interrupts = <12>;
 846 +
 847 +                       reg-shift = <2>;
 848 +               };
 849 +
 850 +               systick@d00 {
 851 +                       compatible = "ralink,rt5350-systick", "ralink,cevt-systick";
 852 +                       reg = <0xd00 0x10>;
 853 +
 854 +                       interrupt-parent = <&cpuintc>;
 855 +                       interrupts = <7>;
 856 +               };
 857 +       };
 858 +
 859 +       rstctrl: rstctrl {
 860 +               compatible = "ralink,rt5350-reset", "ralink,rt2880-reset";
 861 +               #reset-cells = <1>;
 862 +       };
 863 +
 864 +       ubsphy {
 865 +               compatible = "ralink,rt3xxx-usbphy";
 866 +
 867 +               resets = <&rstctrl 22 &rstctrl 25>;
 868 +               reset-names = "host", "device";
 869 +       };
 870 +
 871 +       ethernet@10100000 {
 872 +               compatible = "ralink,rt5350-eth";
 873 +               reg = <0x10100000 10000>;
 874 +
 875 +               interrupt-parent = <&cpuintc>;
 876 +               interrupts = <5>;
 877 +
 878 +               status = "disabled";
 879 +       };
 880 +
 881 +       esw@10110000 {
 882 +               compatible = "ralink,rt3050-esw";
 883 +               reg = <0x10110000 8000>;
 884 +
 885 +               interrupt-parent = <&intc>;
 886 +               interrupts = <17>;
 887 +
 888 +               status = "disabled";
 889 +       };
 890 +
 891 +       ehci@101c0000 {
 892 +               compatible = "ralink,rt3xxx-ehci";
 893 +               reg = <0x101c0000 0x1000>;
 894 +
 895 +               interrupt-parent = <&intc>;
 896 +               interrupts = <18>;
 897 +       };
 898 +
 899 +       ohci@101c1000 {
 900 +               compatible = "ralink,rt3xxx-ohci";
 901 +               reg = <0x101c1000 0x1000>;
 902 +
 903 +               interrupt-parent = <&intc>;
 904 +               interrupts = <18>;
 905 +       };
 906 +};
 907 --- /dev/null
 908 +++ b/arch/mips/ralink/dts/rt5350_eval.dts
 909 @@ -0,0 +1,69 @@
 910 +/dts-v1/;
 911 +
 912 +/include/ "rt5350.dtsi"
 913 +
 914 +/ {
 915 +       compatible = "ralink,rt5350-eval-board", "ralink,rt5350-soc";
 916 +       model = "Ralink RT5350 evaluation board";
 917 +
 918 +       chosen {
 919 +               bootargs = "console=ttyS0,57600";
 920 +       };
 921 +
 922 +       palmbus@10000000 {
 923 +               sysc@0 {
 924 +                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
 925 +                       ralink,uartmux = "gpio";
 926 +                       ralink,wdtmux = <1>;
 927 +               };
 928 +
 929 +               gpio0: gpio@600 {
 930 +                       status = "okay";
 931 +               };
 932 +
 933 +               spi@b00 {
 934 +                       status = "okay";
 935 +
 936 +                       m25p80@0 {
 937 +                               #address-cells = <1>;
 938 +                               #size-cells = <1>;
 939 +                               compatible = "en25q64";
 940 +                               reg = <0 0>;
 941 +                               linux,modalias = "m25p80", "mx25l3205d";
 942 +                               spi-max-frequency = <10000000>;
 943 +
 944 +                               partition@0 {
 945 +                                       label = "u-boot";
 946 +                                       reg = <0x0 0x30000>;
 947 +                                       read-only;
 948 +                               };
 949 +
 950 +                               partition@30000 {
 951 +                                       label = "u-boot-env";
 952 +                                       reg = <0x30000 0x10000>;
 953 +                                       read-only;
 954 +                               };
 955 +
 956 +                               factory: partition@40000 {
 957 +                                       label = "factory";
 958 +                                       reg = <0x40000 0x10000>;
 959 +                                       read-only;
 960 +                               };
 961 +
 962 +                               partition@50000 {
 963 +                                       label = "firmware";
 964 +                                       reg = <0x50000 0x3b0000>;
 965 +                               };
 966 +                       };
 967 +               };
 968 +       };
 969 +
 970 +       ethernet@10100000 {
 971 +               status = "okay";
 972 +       };
 973 +
 974 +       esw@10110000 {
 975 +               status = "okay";
 976 +               ralink,portmap = <0x2f>;
 977 +       };
 978 +};