target/linux/ramips/patches-3.10/0019-USB-add-OHCI-EHCI-OF-binding.patch

   1 From 40b9d3026ed0b3bcd59f90391195df5b2adabad2 Mon Sep 17 00:00:00 2001
   2 From: John Crispin <blogic@openwrt.org>
   3 Date: Sun, 14 Jul 2013 23:34:53 +0200
   4 Subject: [PATCH 19/33] USB: add OHCI/EHCI OF binding
   5
   6 based on f3bc64d6d1f21c1b92d75f233a37b75d77af6963
   7
   8 Signed-off-by: John Crispin <blogic@openwrt.org>
   9 ---
  10  arch/mips/ralink/Kconfig         |    2 ++
  11  drivers/usb/Makefile             |    3 ++-
  12  drivers/usb/host/ehci-platform.c |   19 +++++++++++++++----
  13  drivers/usb/host/ohci-platform.c |   37 ++++++++++++++++++++++++++++++++-----
  14  4 files changed, 51 insertions(+), 10 deletions(-)
  15
  16 --- a/arch/mips/ralink/Kconfig
  17 +++ b/arch/mips/ralink/Kconfig
  18 @@ -24,6 +24,8 @@ choice
  19
  20         config SOC_MT7620
  21                 bool "MT7620"
  22 +               select USB_ARCH_HAS_OHCI
  23 +               select USB_ARCH_HAS_EHCI
  24                 select HW_HAS_PCI
  25
  26  endchoice
  27 --- a/drivers/usb/Makefile
  28 +++ b/drivers/usb/Makefile
  29 @@ -10,6 +10,8 @@ obj-$(CONFIG_USB_DWC3)                += dwc3/
  30
  31  obj-$(CONFIG_USB_MON)          += mon/
  32
  33 +obj-$(CONFIG_USB_PHY)          += phy/
  34 +
  35  obj-$(CONFIG_PCI)              += host/
  36  obj-$(CONFIG_USB_EHCI_HCD)     += host/
  37  obj-$(CONFIG_USB_ISP116X_HCD)  += host/
  38 @@ -44,7 +46,6 @@ obj-$(CONFIG_USB_MICROTEK)    += image/
  39  obj-$(CONFIG_USB_SERIAL)       += serial/
  40
  41  obj-$(CONFIG_USB)              += misc/
  42 -obj-$(CONFIG_USB_PHY)          += phy/
  43  obj-$(CONFIG_EARLY_PRINTK_DBGP)        += early/
  44
  45  obj-$(CONFIG_USB_ATM)          += atm/
  46 --- a/drivers/usb/host/ehci-platform.c
  47 +++ b/drivers/usb/host/ehci-platform.c
  48 @@ -29,6 +29,8 @@
  49  #include <linux/usb.h>
  50  #include <linux/usb/hcd.h>
  51  #include <linux/usb/ehci_pdriver.h>
  52 +#include <linux/usb/phy.h>
  53 +#include <linux/usb/otg.h>
  54
  55  #include "ehci.h"
  56
  57 @@ -118,6 +120,15 @@ static int ehci_platform_probe(struct pl
  58         hcd->rsrc_start = res_mem->start;
  59         hcd->rsrc_len = resource_size(res_mem);
  60
  61 +#ifdef CONFIG_USB_PHY
  62 +       hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
  63 +       if (!IS_ERR_OR_NULL(hcd->phy)) {
  64 +               otg_set_host(hcd->phy->otg,
  65 +                               &hcd->self);
  66 +               usb_phy_init(hcd->phy);
  67 +       }
  68 +#endif
  69 +
  70         hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
  71         if (IS_ERR(hcd->regs)) {
  72                 err = PTR_ERR(hcd->regs);
  73 @@ -155,6 +166,9 @@ static int ehci_platform_remove(struct p
  74         if (pdata == &ehci_platform_defaults)
  75                 dev->dev.platform_data = NULL;
  76
  77 +       if (pdata == &ehci_platform_defaults)
  78 +               dev->dev.platform_data = NULL;
  79 +
  80         return 0;
  81  }
  82
  83 @@ -199,9 +213,8 @@ static int ehci_platform_resume(struct d
  84  #define ehci_platform_resume   NULL
  85  #endif /* CONFIG_PM */
  86
  87 -static const struct of_device_id vt8500_ehci_ids[] = {
  88 -       { .compatible = "via,vt8500-ehci", },
  89 -       { .compatible = "wm,prizm-ehci", },
  90 +static const struct of_device_id ralink_ehci_ids[] = {
  91 +       { .compatible = "ralink,rt3xxx-ehci", },
  92         {}
  93  };
  94
  95 @@ -225,7 +238,7 @@ static struct platform_driver ehci_platf
  96                 .owner  = THIS_MODULE,
  97                 .name   = "ehci-platform",
  98                 .pm     = &ehci_platform_pm_ops,
  99 -               .of_match_table = of_match_ptr(vt8500_ehci_ids),
 100 +               .of_match_table = of_match_ptr(ralink_ehci_ids),
 101         }
 102  };
 103
 104 --- a/drivers/usb/host/ohci-platform.c
 105 +++ b/drivers/usb/host/ohci-platform.c
 106 @@ -16,6 +16,10 @@
 107  #include <linux/err.h>
 108  #include <linux/platform_device.h>
 109  #include <linux/usb/ohci_pdriver.h>
 110 +#include <linux/dma-mapping.h>
 111 +#include <linux/of.h>
 112 +
 113 +static struct usb_ohci_pdata ohci_platform_defaults;
 114
 115  static int ohci_platform_reset(struct usb_hcd *hcd)
 116  {
 117 @@ -88,14 +92,22 @@ static int ohci_platform_probe(struct pl
 118  {
 119         struct usb_hcd *hcd;
 120         struct resource *res_mem;
 121 -       struct usb_ohci_pdata *pdata = dev->dev.platform_data;
 122 +       struct usb_ohci_pdata *pdata;
 123         int irq;
 124         int err = -ENOMEM;
 125
 126 -       if (!pdata) {
 127 -               WARN_ON(1);
 128 -               return -ENODEV;
 129 -       }
 130 +       /*
 131 +        * use reasonable defaults so platforms don't have to provide these.
 132 +        * with DT probing on ARM, none of these are set.
 133 +        */
 134 +       if (!dev->dev.platform_data)
 135 +               dev->dev.platform_data = &ohci_platform_defaults;
 136 +       if (!dev->dev.dma_mask)
 137 +               dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
 138 +       if (!dev->dev.coherent_dma_mask)
 139 +               dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 140 +
 141 +       pdata = dev->dev.platform_data;
 142
 143         if (usb_disabled())
 144                 return -ENODEV;
 145 @@ -128,6 +140,12 @@ static int ohci_platform_probe(struct pl
 146         hcd->rsrc_start = res_mem->start;
 147         hcd->rsrc_len = resource_size(res_mem);
 148
 149 +#ifdef CONFIG_USB_PHY
 150 +       hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
 151 +       if (!IS_ERR_OR_NULL(hcd->phy))
 152 +               usb_phy_init(hcd->phy);
 153 +#endif
 154 +
 155         hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
 156         if (IS_ERR(hcd->regs)) {
 157                 err = PTR_ERR(hcd->regs);
 158 @@ -162,6 +180,9 @@ static int ohci_platform_remove(struct p
 159         if (pdata->power_off)
 160                 pdata->power_off(dev);
 161
 162 +       if (pdata == &ohci_platform_defaults)
 163 +               dev->dev.platform_data = NULL;
 164 +
 165         return 0;
 166  }
 167
 168 @@ -201,6 +222,11 @@ static int ohci_platform_resume(struct d
 169  #define ohci_platform_resume   NULL
 170  #endif /* CONFIG_PM */
 171
 172 +static const struct of_device_id ralink_ohci_ids[] = {
 173 +       { .compatible = "ralink,rt3xxx-ohci", },
 174 +       {}
 175 +};
 176 +
 177  static const struct platform_device_id ohci_platform_table[] = {
 178         { "ohci-platform", 0 },
 179         { }
 180 @@ -221,5 +247,6 @@ static struct platform_driver ohci_platf
 181                 .owner  = THIS_MODULE,
 182                 .name   = "ohci-platform",
 183                 .pm     = &ohci_platform_pm_ops,
 184 +               .of_match_table = of_match_ptr(ralink_ohci_ids),
 185         }
 186  };