ramips: rt305x: add support for the Asus RT-G32 B1 board
[openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / mach-rt-g32-revb.c
1 /*
2  *  Asus RT-G32 rev B board support
3  *
4  *  Copyright (C) 2011 Sergiy <piratfm@gmail.com>
5  *
6  *  This program is free software; you can redistribute it and/or modify it
7  *  under the terms of the GNU General Public License version 2 as published
8  *  by the Free Software Foundation.
9  */
10
11 #include <linux/init.h>
12 #include <linux/platform_device.h>
13 #include <linux/spi/spi.h>
14 #include <linux/spi/flash.h>
15 #include <linux/mtd/mtd.h>
16 #include <linux/mtd/partitions.h>
17
18 #include <asm/mach-ralink/machine.h>
19 #include <asm/mach-ralink/dev-gpio-buttons.h>
20 #include <asm/mach-ralink/rt305x.h>
21 #include <asm/mach-ralink/rt305x_regs.h>
22
23 #include "devices.h"
24
25 #define RT_G32B_GPIO_BUTTON_WPS         0       /* active low */
26 #define RT_G32B_GPIO_BUTTON_RESET       10      /* active low */
27
28 #define RT_G32B_BUTTONS_POLL_INTERVAL   20
29
30 #ifdef CONFIG_MTD_PARTITIONS
31 static struct mtd_partition rt_g32b_partitions[] = {
32         {
33                 .name   = "u-boot",
34                 .offset = 0,
35                 .size   = 0x030000,
36                 .mask_flags = MTD_WRITEABLE,
37         }, {
38                 .name   = "devdata",
39                 .offset = 0x030000,
40                 .size   = 0x010000,
41                 .mask_flags = MTD_WRITEABLE,
42         }, {
43                 .name   = "devconf",
44                 .offset = 0x040000,
45                 .size   = 0x010000,
46                 .mask_flags = MTD_WRITEABLE,
47         }, {
48                 .name   = "kernel",
49                 .offset = 0x050000,
50                 .size   = 0x0d0000,
51         }, {
52                 .name   = "rootfs",
53                 .offset = 0x120000,
54                 .size   = 0x2e0000,
55         }, {
56                 .name   = "firmware",
57                 .offset = 0x050000,
58                 .size   = 0x3b0000,
59         }
60 };
61 #endif /* CONFIG_MTD_PARTITIONS */
62
63 const struct flash_platform_data rt_g32b_flash = {
64         .type           = "mx25l3205d",
65 #ifdef CONFIG_MTD_PARTITIONS
66         .parts          = rt_g32b_partitions,
67         .nr_parts       = ARRAY_SIZE(rt_g32b_partitions),
68 #endif
69 };
70
71 struct spi_board_info __initdata rt_g32b_spi_slave_info[] = {
72         {
73                 .modalias       = "m25p80",
74                 .platform_data  = &rt_g32b_flash,
75                 .irq            = -1,
76                 .max_speed_hz   = 10000000,
77                 .bus_num        = 0,
78                 .chip_select    = 0,
79         },
80 };
81
82 static struct gpio_button rt_g32b_gpio_buttons[] __initdata = {
83         {
84                 .desc           = "reset",
85                 .type           = EV_KEY,
86                 .code           = KEY_RESTART,
87                 .threshold      = 3,
88                 .gpio           = RT_G32B_GPIO_BUTTON_RESET,
89                 .active_low     = 1,
90         }, {
91                 .desc           = "wps",
92                 .type           = EV_KEY,
93                 .code           = KEY_WPS_BUTTON,
94                 .threshold      = 3,
95                 .gpio           = RT_G32B_GPIO_BUTTON_WPS,
96                 .active_low     = 1,
97         }
98 };
99
100 static void __init rt_g32b_init(void)
101 {
102         rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
103         rt305x_register_spi(rt_g32b_spi_slave_info,
104                             ARRAY_SIZE(rt_g32b_spi_slave_info));
105
106         rt305x_register_ethernet();
107         ramips_register_gpio_buttons(-1, RT_G32B_BUTTONS_POLL_INTERVAL,
108                                      ARRAY_SIZE(rt_g32b_gpio_buttons),
109                                      rt_g32b_gpio_buttons);
110         rt305x_register_wifi();
111         rt305x_register_wdt();
112 }
113
114 MIPS_MACHINE(RAMIPS_MACH_RT_G32_B1, "RT-G32-B1", "Asus RT-G32 B1",
115              rt_g32b_init);