target/linux/ramips/dts/ZTE-Q7.dts

   1 /dts-v1/;
   2
   3 /include/ "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ZTE-Q7", "ralink,mt7620a-soc";
   7         model = "ZTE Q7";
   8
   9         palmbus@10000000 {
  10
  11                 gpio0: gpio@600 {
  12                         status = "okay";
  13                 };
  14
  15                 gpio1: gpio@638 {
  16                         status = "okay";
  17                 };
  18
  19                 spi@b00 {
  20                         status = "okay";
  21
  22                         m25p80@0 {
  23                                 #address-cells = <1>;
  24                                 #size-cells = <1>;
  25                                 compatible = "en25q64";
  26                                 reg = <0 0>;
  27                                 linux,modalias = "m25p80", "en25q64";
  28                                 spi-max-frequency = <10000000>;
  29
  30                                 partition@0 {
  31                                         label = "u-boot";
  32                                         reg = <0x0 0x30000>;
  33                                         read-only;
  34                                 };
  35
  36                                 partition@30000 {
  37                                         label = "u-boot-env";
  38                                         reg = <0x30000 0x10000>;
  39                                         read-only;
  40                                 };
  41
  42                                 factory: partition@40000 {
  43                                         label = "factory";
  44                                         reg = <0x40000 0x10000>;
  45                                         read-only;
  46                                 };
  47
  48                                 partition@50000 {
  49                                         label = "firmware";
  50                                         reg = <0x50000 0x7b0000>;
  51                                 };
  52                         };
  53                 };
  54         };
  55
  56         pinctrl {
  57                 state_default: pinctrl0 {
  58                         gpio {
  59                                 ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
  60                                 ralink,function = "gpio";
  61                         };
  62                 };
  63         };
  64
  65         ethernet@10100000 {
  66                 pinctrl-names = "default";
  67                 pinctrl-0 = <&ephy_pins>;
  68                 mtd-mac-address = <&factory 0x4>;
  69                 ralink,port-map = "wllll";
  70         };
  71
  72         wmac@10180000 {
  73                 ralink,mtd-eeprom = <&factory 0>;
  74         };
  75
  76         sdhci@10130000 {
  77                 status = "okay";
  78         };
  79
  80         ehci@101c0000 {
  81                 status = "okay";
  82         };
  83
  84         ohci@101c1000 {
  85                 status = "okay";
  86         };
  87
  88         gpio-leds {
  89                 compatible = "gpio-leds";
  90                 statred {
  91                         label = "zte:red:status";
  92                         gpios = <&gpio0 13 1>;
  93                 };
  94                 statblue {
  95                         label = "zte:blue:status";
  96                         gpios = <&gpio0 9 1>;
  97                 };
  98         };
  99
 100         gpio-keys-polled {
 101                 compatible = "gpio-keys-polled";
 102                 #address-cells = <1>;
 103                 #size-cells = <0>;
 104                 poll-interval = <20>;
 105                 reset {
 106                         label = "reset";
 107                         gpios = <&gpio1 2 1>;
 108                         linux,code = <0x198>;
 109                 };
 110         };
 111 };