target/linux/ramips/dts/WSR-1166.dts

   1 /dts-v1/;
   2
   3 /include/ "mt7621.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
   7         model = "Buffalo WSR-1166DHP";
   8
   9         memory@0 {
  10                 reg = <0x0 0x8000000>;
  11         };
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,57600";
  15         };
  16
  17         palmbus@1E000000 {
  18                 spi@b00 {
  19                         status = "okay";
  20
  21                         m25p80@0 {
  22                                 #address-cells = <1>;
  23                                 #size-cells = <1>;
  24                                 compatible = "mx25l12805d";
  25                                 reg = <0 0>;
  26                                 linux,modalias = "m25p80";
  27                                 spi-max-frequency = <10000000>;
  28
  29                                 partition@0 {
  30                                         label = "u-boot";
  31                                         reg = <0x0 0x30000>;
  32                                         read-only;
  33                                 };
  34
  35                                 partition@30000 {
  36                                         label = "u-boot-env";
  37                                         reg = <0x30000 0x10000>;
  38                                         read-only;
  39                                 };
  40
  41                                 factory: partition@40000 {
  42                                         label = "factory";
  43                                         reg = <0x40000 0x10000>;
  44                                         read-only;
  45                                 };
  46
  47                                 partition@50000 {
  48                                         label = "firmware";
  49                                         reg = <0x50000 0x7c0000>;
  50                                 };
  51
  52                                 partition@810000 {
  53                                         label = "firmware2";
  54                                         reg = <0x810000 0x7c0000>;
  55                                 };
  56
  57                                 partition@fd00000 {
  58                                         label = "usercfg";
  59                                         reg = <0xfd0000 0x10000>;
  60                                 };
  61
  62                                 partition@fe00000 {
  63                                         label = "board_data";
  64                                         reg = <0xfe0000 0x10000>;
  65                                 };
  66                         };
  67                 };
  68         };
  69
  70         pinctrl {
  71                 state_default: pinctrl0 {
  72                         gpio {
  73                                 ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
  74                                 ralink,function = "gpio";
  75                         };
  76                 };
  77         };
  78
  79         gpio-leds {
  80                 compatible = "gpio-leds";
  81                 internet_g {
  82                         label = "buffalo:green:internet";
  83                         gpios = <&gpio1 9 1>;
  84                 };
  85                 router_g {
  86                         label = "buffalo:green:router";
  87                         gpios = <&gpio1 10 1>;
  88                 };
  89                 router_o {
  90                         label = "buffalo:orange:router";
  91                         gpios = <&gpio1 11 1>;
  92                 };
  93                 internet_o {
  94                         label = "buffalo:orange:internet";
  95                         gpios = <&gpio1 12 1>;
  96                 };
  97                 wifi_o {
  98                         label = "buffalo:orange:wifi";
  99                         gpios = <&gpio1 13 1>;
 100                 };
 101                 power {
 102                         label = "buffalo:green:power";
 103                         gpios = <&gpio0 14 1>;
 104                 };
 105                 diag {
 106                         label = "buffalo:orange:diag";
 107                         gpios = <&gpio1 15 1>;
 108                 };
 109                 wifi_g {
 110                         label = "buffalo:green:wifi";
 111                         gpios = <&gpio1 16 1>;
 112                 };
 113         };
 114
 115         gpio-keys-polled {
 116                 compatible = "gpio-keys-polled";
 117                 #address-cells = <1>;
 118                 #size-cells = <0>;
 119                 poll-interval = <20>;
 120                 power {
 121                         label = "power";
 122                         gpios = <&gpio0 18 1>;
 123                         linux,code = <0x74>;
 124                 };
 125                 reset {
 126                         label = "reset";
 127                         gpios = <&gpio0 3 1>;
 128                         linux,code = <0x198>;
 129                 };
 130                 aoss {
 131                         label = "aoss";
 132                         gpios = <&gpio0 6 1>;
 133                         linux,code = <0x211>;
 134                 };
 135                 auto {
 136                         label = "mode";
 137                         gpios = <&gpio0 7 0>;
 138                         linux,code = <0x100>;
 139                         linux,input-type = <5>; /* EV_SW */
 140                 };
 141                 ap {
 142                         label = "ap";
 143                         gpios = <&gpio0 10 0>;
 144                         linux,code = <0x100>;
 145                         linux,input-type = <5>; /* EV_SW */
 146                 };
 147                 router {
 148                         label = "router";
 149                         gpios = <&gpio0 12 0>;
 150                         linux,code = <0x100>;
 151                         linux,input-type = <5>; /* EV_SW */
 152                 };
 153         };
 154
 155         gpio_poweroff {
 156                 compatible = "gpio-poweroff";
 157                 gpios = <&gpio0 0 1>;
 158         };
 159 };