target/linux/ramips/dts/WLI-TX4-AG300N.dts

   1 /dts-v1/;
   2
   3 /include/ "rt2880.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
   9         model = "Buffalo WLI-TX4-AG300N";
  10
  11         palmbus@300000 {
  12                 gpio0: gpio@600 {
  13                         status = "okay";
  14                 };
  15         };
  16
  17         cfi@1f000000 {
  18                 compatible = "cfi-flash";
  19                 reg = <0x1f000000 0x800000>;
  20                 bank-width = <2>;
  21                 device-width = <2>;
  22                 #address-cells = <1>;
  23                 #size-cells = <1>;
  24
  25                 partition@0 {
  26                         label = "uboot";
  27                         reg = <0x0 0x30000>;
  28                         read-only;
  29                 };
  30
  31                 partition@30000 {
  32                         label = "uboot-env";
  33                         reg = <0x30000 0x10000>;
  34                         read-only;
  35                 };
  36
  37                 factory: partition@40000 {
  38                         label = "factory";
  39                         reg = <0x40000 0x10000>;
  40                         read-only;
  41                 };
  42
  43                 partition@50000 {
  44                         label = "linux";
  45                         reg = <0x50000 0x3b0000>;
  46                 };
  47         };
  48
  49         ethernet@400000 {
  50                 status = "okay";
  51                 mtd-mac-address = <&factory 0x4>;
  52
  53                 port@0 {
  54                         mediatek,fixed-link = <1000 1 1 1>;
  55                 };
  56         };
  57
  58         wmac@480000 {
  59                 ralink,mtd-eeprom = <&factory 0>;
  60         };
  61
  62         gpio-keys-polled {
  63                 compatible = "gpio-keys-polled";
  64                 #address-cells = <1>;
  65                 #size-cells = <0>;
  66                 poll-interval = <100>;
  67
  68                 wps {
  69                         label = "wps";
  70                         gpios = <&gpio0 0 1>;
  71                         linux,code = <0x211>;
  72                 };
  73
  74                 bandwidth {
  75                         label = "bandwidth";
  76                         gpios = <&gpio0 8 0>;
  77                         linux,code = <0x198>;
  78                 };
  79
  80                 reset {
  81                         label = "reset";
  82                         gpios = <&gpio0 9 1>;
  83                         linux,code = <0x198>;
  84                 };
  85         };
  86
  87         gpio-leds {
  88                 compatible = "gpio-leds";
  89
  90                 diag {
  91                         label = "wli-tx4-ag300n:red:diag";
  92                         gpios = <&gpio0 10 1>;
  93                 };
  94
  95                 power {
  96                         label = "wli-tx4-ag300n:blue:power";
  97                         gpios = <&gpio0 12 1>;
  98                 };
  99
 100                 security {
 101                         label = "wli-tx4-ag300n:blue:security";
 102                         gpios = <&gpio0 13 1>;
 103                 };
 104         };
 105 };