target/linux/ramips/dts/WL-351.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WL-351", "ralink,rt3052-soc";
   7         model = "Sitecom WL-351 v1 002";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25
  26                 partition@0 {
  27                         label = "u-boot";
  28                         reg = <0x0 0x30000>;
  29                         read-only;
  30                 };
  31
  32                 partition@30000 {
  33                         label = "u-boot-env";
  34                         reg = <0x30000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 factory: partition@40000 {
  39                         label = "factory";
  40                         reg = <0x40000 0x10000>;
  41                         read-only;
  42                 };
  43
  44                 partition@50000 {
  45                         label = "firmware";
  46                         reg = <0x50000 0x3b0000>;
  47                 };
  48         };
  49
  50         ethernet@10100000 {
  51                 mtd-mac-address = <&factory 0x4>;
  52         };
  53
  54         esw@10110000 {
  55                 mediatek,portmap = <0x3f>;
  56                 ralink,fct2 = <0x0002500c>;
  57                 /*
  58                  * ext phy base addr 31, rx/tx clock skew 0,
  59                  * turbo mii off, rgmi 3.3v off, port 5 polling off
  60                  * port5: enabled, gige, full-duplex, rx/tx-flow-control
  61                  * port6: enabled, gige, full-duplex, rx/tx-flow-control
  62                 */
  63                 ralink,fpa2 = <0x1f003fff>;
  64         };
  65
  66         wmac@10180000 {
  67                 ralink,mtd-eeprom = <&factory 0>;
  68         };
  69
  70         otg@101c0000 {
  71                 status = "okay";
  72         };
  73
  74         gpio-leds {
  75                 compatible = "gpio-leds";
  76
  77                 power {
  78                         label = "wl-351:amber:power";
  79                         gpios = <&gpio0 8 1>;
  80                 };
  81
  82                 unpopulated {
  83                         label = "wl-351:amber:unpopulated";
  84                         gpios = <&gpio0 12 1>;
  85                 };
  86
  87                 unpopulated2 {
  88                         label = "wl-351:blue:unpopulated";
  89                         gpios = <&gpio0 13 1>;
  90                 };
  91         };
  92
  93         gpio-keys-polled {
  94                 compatible = "gpio-keys-polled";
  95                 #address-cells = <1>;
  96                 #size-cells = <0>;
  97                 poll-interval = <20>;
  98
  99                 reset {
 100                         label = "reset";
 101                         gpios = <&gpio0 10 1>;
 102                         linux,code = <0x198>;
 103                 };
 104
 105                 wps {
 106                         label = "wps";
 107                         gpios = <&gpio0 0 1>;
 108                         linux,code = <0x211>;
 109                 };
 110         };
 111
 112         rtl8366rb {
 113                 compatible = "rtl8366rb";
 114                 gpio-sda = <&gpio0 1 0>;
 115                 gpio-sck = <&gpio0 2 0>;
 116         };
 117 };