target/linux/ramips/dts/WIZFI630A.dts

   1 /dts-v1/;
   2
   3 /include/ "rt5350.dtsi"
   4
   5 / {
   6         compatible = "wizfi630a", "ralink,rt5350-soc";
   7         model = "WIZnet WizFi630A";
   8
   9         chosen {
  10                 bootargs = "console=ttyS1,115200";
  11         };
  12
  13         palmbus@10000000 {
  14                 gpio1: gpio@660 {
  15                         status = "okay";
  16                 };
  17
  18                 spi@b00 {
  19                         status = "okay";
  20
  21                         m25p80@0 {
  22                                 #address-cells = <1>;
  23                                 #size-cells = <1>;
  24                                 compatible = "jedec,spi-nor";
  25                                 reg = <0>;
  26                                 linux,modalias = "m25p80", "w25q128";
  27                                 spi-max-frequency = <10000000>;
  28
  29                                 partition@0 {
  30                                         label = "uboot";
  31                                         reg = <0x0 0x30000>;
  32                                         read-only;
  33                                 };
  34
  35                                 partition@30000 {
  36                                         label = "uboot-env";
  37                                         reg = <0x30000 0x10000>;
  38                                         read-only;
  39                                 };
  40
  41                                 factory: partition@40000 {
  42                                         label = "factory";
  43                                         reg = <0x40000 0x10000>;
  44                                         read-only;
  45                                 };
  46
  47                                 partition@50000 {
  48                                         label = "firmware";
  49                                         reg = <0x50000 0xfb0000>;
  50                                 };
  51                         };
  52                 };
  53
  54                 uart@500 {
  55                         compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
  56                         reg = <0x500 0x100>;
  57                         resets = <&rstctrl 12>;
  58                         reset-names = "uart";
  59                         interrupt-parent = <&intc>;
  60                         interrupts = <5>;
  61                         reg-shift = <2>;
  62                         status = "okay";
  63                 };
  64
  65                 uartlite@c00 {
  66                         compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
  67                         reg = <0xc00 0x100>;
  68                         resets = <&rstctrl 19>;
  69                         reset-names = "uartl";
  70                         interrupt-parent = <&intc>;
  71                         interrupts = <12>;
  72                         reg-shift = <2>;
  73                         pinctrl-names = "default";
  74                         pinctrl-0 = <&uartlite_pins>;
  75                 };
  76         };
  77
  78         pinctrl {
  79                 state_default: pinctrl0 {
  80                         gpio {
  81                                 ralink,group = "i2c", "jtag" ;
  82                                 ralink,function = "gpio";
  83                         };
  84                 };
  85
  86                 uartf_gpio_pins: uartf_gpio {
  87                         uartf_gpio {
  88                                 ralink,group = "uartf";
  89                                 ralink,function = "uartf";
  90                         };
  91                 };
  92
  93                 uartlite_pins: uartlite {
  94                         uart {
  95                                 ralink,group = "uartlite";
  96                                 ralink,function = "uartlite";
  97                         };
  98                 };
  99         };
 100
 101         ethernet@10100000 {
 102                 mtd-mac-address = <&factory 0x4>;
 103         };
 104
 105         esw@10110000 {
 106                 mediatek,portmap = <0x17>;
 107         };
 108
 109         wmac@10180000 {
 110                 ralink,mtd-eeprom = <&factory 0>;
 111         };
 112
 113         ehci@101c0000 {
 114                 status = "okay";
 115         };
 116
 117         ohci@101c1000 {
 118                 status = "okay";
 119         };
 120
 121         gpio-export {
 122                 compatible = "gpio-export";
 123                 #size-cells = <0>;
 124         };
 125
 126         gpio-leds {
 127                 compatible = "gpio-leds";
 128
 129                 run {
 130                         label = "wizfi630a::run";
 131                         gpios = <&gpio0 1 1>;
 132                 };
 133
 134                 wps {
 135                         label = "wizfi630a::wps";
 136                         gpios = <&gpio0 20 1>;
 137                 };
 138
 139                 uart1 {
 140                         label = "wizfi630a::uart1";
 141                         gpios = <&gpio0 18 1>;
 142                 };
 143
 144                 uart2 {
 145                         label = "wizfi630a::uart2";
 146                         gpios = <&gpio0 21 1>;
 147                 };
 148         };
 149
 150         gpio-keys-polled {
 151                 compatible = "gpio-keys-polled";
 152                 #address-cells = <1>;
 153                 #size-cells = <0>;
 154                 poll-interval = <20>;
 155
 156                 reset {
 157                         label = "reset";
 158                         gpios = <&gpio0 17 1>;
 159                         linux,code = <0x198>;
 160                 };
 161
 162                 wps {
 163                         label = "wps";
 164                         gpios = <&gpio0 0 1>;
 165                         linux,code = <0x211>;
 166                 };
 167
 168                 scm1 {
 169                         label = "SCM1";
 170                         gpios = <&gpio0 19 1>;
 171                         linux,code = <0x100>;
 172                 };
 173
 174                 scm2 {
 175                         label = "SCM2";
 176                         gpios = <&gpio0 2 1>;
 177                         linux,code = <0x101>;
 178                 };
 179         };
 180 };